Miele Dishwasher G 2143 User Manual

Operating Instructions  
Dishwasher  
G 2143  
en - US, CA  
To prevent accidents  
and appliance damage  
read these instructions  
before  
installation or use.  
M.-Nr. 07 724 060  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Additional options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Turbo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Delay Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Technical faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Problems water Intake / Drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
General problems with the dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Sounds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
Poor cleaning results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
Comparison Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
Transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
User Maintenance Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45  
Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46  
Triple filter system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47  
Cleaning the spray arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49  
Cleaning the water inlet filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50  
Cleaning the drain pump and non-return valve. . . . . . . . . . . . . . . . . . . . . . . . . . . 51  
Installation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53  
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Plumbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55  
Waterproof system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55  
Connection to the water supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55  
Drainage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
WARNING –  
Electrical Safety  
Before installation, make sure that  
~
the voltage and frequency listed on the  
data plate correspond with the  
When using your dishwasher, follow  
basic precautions, including the  
following:  
household electrical supply. This data  
must correspond to prevent injury and  
machine damage. Consult a qualified  
electrician if in doubt.  
Read all instructions before  
installation or use of the dishwasher  
to prevent injury and machine  
damage.  
Before installation or service,  
~
disconnect the power supply to the  
work area by unplugging the unit,  
"tripping" the circuit breaker or  
removing the fuse.  
Use the dishwasher only for its  
intended purpose. This appliance is  
intended for residential use only.  
Do not use an extension cord to  
~
connect this appliance to electricity.  
Extension cords do not guarantee the  
required safety of the appliance (e.g.  
danger of overheating).  
Keep these operating instructions in  
a safe place and pass them on to  
any future user.  
Be certain your appliance is  
~
properly installed and grounded by a  
qualified technician. To guarantee the  
electrical safety of this appliance  
continuity must exist between the  
appliance and an effective grounding  
system. It is imperative that this basic  
safety requirement be met. If there is  
any doubt, have the electrical system of  
the house checked by a qualified  
electrician.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
Installation  
, WARNING - Fire hazard  
~
Do not cover or crush the plug of the  
appliance. Ensure that the cabinet  
opening for the dishwasher provides  
ample space for the plug. Installing the  
dishwasher in a tight space may crimp  
the power cord or put pressure on the  
The dishwasher must be installed  
~
and connected in compliance with the  
installation instructions.  
Installation and repair work should  
~
be performed by a Miele authorized  
service technician. Work by unqualified plug which could cause overheating.  
persons could be dangerous and may  
This dishwasher should only be  
~
installed under a continuous counter  
void the warranty.  
Do not install or use a damaged  
top secured to adjacent cabinetry.  
~
dishwasher. A damaged appliance is  
dangerous. Unplug the machine and  
call your Miele dealer or the Miele  
Technical Service Department.  
Do not install this dishwasher  
~
beneath a cooking surface, oven or any  
appliance that radiates heat.  
High temperatures from these units  
may damage the dishwasher.  
Ensure that any plastic wrappings,  
~
bags, etc. are disposed of safely and  
kept out of the reach of children.  
Danger of suffocation!  
When installing the dishwasher  
~
under a counter top and removing the  
toe-kick, a build-under toe-kick must be  
installed. Use the respective installation  
kit. Danger of injuries.  
This equipment is not designed for  
~
maritime use or for use in mobile  
installations such as recreational  
vehicles or aircraft. However, under  
certain conditions it may be possible for  
an installation in these applications.  
Please contact the nearest Miele dealer  
or the Miele Technical Service  
Do not cut the intake hose or  
~
submerge it in liquid. This hose  
contains electrical components that  
could cause injury or property damage  
if cut or submerged.  
Department with specific requirements.  
Only connect the dishwasher to the  
~
mains when all installation and  
plumbing work is complete.  
It is recommended that the  
~
dishwasher only be connected to the  
mains with the plug (no hard-wiring).  
The outlet must be accessible at all  
times after installation to disconnect the  
dishwasher.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
Use  
Do not inhale or swallow detergents.  
~
Dishwasher detergents contain irritant  
To reduce the risk of injury, do not  
~
allow children to play in, on or near the  
and corrosive ingredients. They can  
cause burning in the mouth and throat if  
swallowed, or inhibit breathing. Consult  
dishwasher.  
Only use the dishwasher if all panels a doctor immediately if detergent has  
~
are properly in place.  
been swallowed or inhaled.  
Do not tamper with the controls.  
Do not damage, sit or stand on the  
Do not drink water from the  
~
dishwasher! Harmful residues could be  
~
~
present.  
door or baskets of the dishwasher.  
Close the door when not in use.  
Do not fill the rinse aid reservoir or  
~
salt container with detergent. It will  
destroy the rinse aid compartment and  
water softener.  
Under certain conditions, hydrogen  
~
gas may be produced in a hot water  
system that has not been used for two  
weeks or more. HYDROGEN GAS IS  
If the power cord is damaged it  
~
EXPLOSIVE. If the hot water system has must only be replaced by a Miele  
not been used for such a period, turn  
on all hot water faucets and let water  
flow from each for several minutes  
before using the dishwasher. This will  
release any accumulated hydrogen  
gas. Do not smoke or use an open  
flame during this time.  
Service technician with a genuine Miele  
power cord.  
Disposal of an appliance  
If the appliance is removed from its  
~
installation site and will not be used,  
remove the doorlock to the wash  
cabinet to prevent children from locking  
themselves in the machine.  
Be sure that all items placed in the  
~
dishwasher are "dishwasher safe". For  
items not labeled, check the  
manufacturer’s recommendations.  
SAVE THESE  
When loading tableware, place  
~
sharp items away from the door to  
prevent damage to the seal. Load  
sharp items pointing downwards to  
prevent injuries.  
INSTRUCTIONS  
Only use detergents and rinse aids  
~
recommended for residential  
dishwashers. Keep all detergents and  
rinse aids out of the reach of children.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Guide to the dishwasher  
a Upper spray arm (not visible)  
b Cutlery tray  
gTriple filter system  
hData plate  
c Upper basket  
iChild Safety Lock in the door handle  
(not visible)  
d Middle spray arm  
jRinse aid reservoir  
e Air inlet for drying  
(depending on model)  
kDual compartment detergent  
dispenser  
f Lower spray arm  
lSalt container  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Guide to the dishwasher  
Control panel  
aProgram selection  
bTime display  
fStart / Stop button with indicator  
gDelay start button  
cProgram sequence display  
dOn/Off button K  
hTurbo button with indicator  
iProgram button  
eCheck/Refill indicators  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caring for the environment  
Energy saving washing  
This dishwasher is exceptionally  
economical in the use of water and  
electricity. For best results follow these  
tips:  
^ For lowest energy consumption you  
may connect the dishwasher to a  
cold water source.  
^ For fastest possible wash times, with  
slightly higher energy consumption,  
connect the dishwasher to a hot  
water source.  
^ Make full use of the baskets without  
overloading for the most economical  
washing.  
^ Use the correct amount of detergent  
and rinse aid. Detergent dosage is  
dependent upon the amount of  
soiling and type of dishware being  
washed. See the "Program Guide" for  
more information.  
^ When using powder or gel detergent,  
reduce the amount to 2/3 of the  
normal amount when washing a small  
load.  
^ Choose a program that best suits the  
degree of soiling and the type of  
dishes being washed.  
^ For small loads select "Express".  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before using for the first time  
To open the door  
Child Safety Lock  
^ Press the release catch inside the  
The Child Safety Lock is designed to  
prevent children from opening the  
dishwasher.  
door grip.  
If the door is opened during operation,  
the dishwasher will stop running. Once  
the door is closed the program will  
restart.  
^ To lock the door, push the slider  
below the door grip to the right.  
^ To unlock the door, push the slider to  
the left.  
To close the door  
^ Push the baskets in.  
^ Lift the door and push until it clicks  
into place.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before using for the first time  
Water softener  
In areas where the water hardness  
fluctuates (example 37 - 50 °d [39 -  
52 gr/gal]) always program the  
machine to the higher value (in this  
example 50 °d [52 gr/gal] ).  
Every dishwasher is tested before  
leaving the factory. Any water  
remaining in the machine is from the  
final factory test and does not  
indicate that the machine has been  
used.  
If there is a fault, it will help the service  
technician to know the hardness of your  
local water supply.  
To achieve good cleaning results, the  
dishwasher needs soft water. Hard  
water results in calcium deposits on  
dishware and in the dishwasher.  
If your tap water hardness is above 4 °d  
(4 gr/gal [US]), the water should be  
softened.  
^ Please note your water hardness::  
°d (gr/gal)  
The water hardness was programmed  
to 1 -4 °d (1 -4 gr/gal) by factory  
default.  
– The water softener must be filled with  
dishwasher salt for reactivation.  
If using "Tab" products which include  
salt, you should still add salt to the  
machine to achieve optimal cleaning  
results.  
– Your local water authority will be able  
to advise you of the water hardness  
level in your area.  
– The dishwasher must be  
programmed to correspond to the  
water hardness in your area.  
If the hardness of your local supply  
is constantly lower than 4 °d (4 gr/gal  
[US]), you do not need to add water  
softener salt. However the water  
hardness level must still be  
programmed.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before using for the first time  
Programming the water  
softener  
The amount set can be recognized by  
the flashing rhythm of the "Rinse"  
indicator (see table):  
To exit the programming mode at  
any time, turn the dishwasher off  
with the "K" button.  
°d  
1 -  
5 -  
gr/gal  
1 - 4  
Flashing rhythm  
once  
4
7
5 - 7  
twice  
^ Turn the dishwasher off with "K".  
8 - 11  
12 - 15  
16 - 20  
21 - 25  
26 - 30  
31 - 36  
37 - 45  
46 - 70  
8 - 11  
3 times  
13 - 16  
17 - 21  
22 - 26  
27 - 31  
32 - 38  
39 - 47  
48 - 73  
4 times  
^ Press and hold the program and  
"Start / Stop" button simultaneously  
turn the dishwasher on with "K". Hold  
the "Start / Stop" button in until the  
"Start / Stop indicator lights.  
5 times  
6 times  
7 times  
8 times  
If it does not come on, start over.  
9 times  
^ Press the "Delay Start" button twice.  
1 long flash  
The "Delay Start" indicator flashes twice  
in intervals and the program sequence  
indicator "Rinse" flashes once in  
intervals (factory default).  
^ Select the desired setting with the  
"Start / Stop" button. Every touch of  
the button increases the level.  
The programmed dosage is saved.  
^ Turn the dishwasher off "s".  
Checking the programmed water  
hardness level  
^ Turn the dishwasher off "K".  
^ Press the "Start / Stop" button, at the  
same time turn the dishwasher on  
"K".  
Hold the "Start / Stop" button in until  
the indicator comes on.  
^ Press the "Delay Start" button twice.  
The "Rinse" indicator flashes in the  
rhythm which corresponds to the  
adjusted water hardness.  
^ Turn the dishwasher off "K".  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before using for the first time  
Filling the salt container  
,Inadvertently filling the salt  
container with dishwashing  
detergent will damage the water  
softener.  
,Only use water softener salt  
specially formulated for  
dishwashers. Other salts may  
contain insoluble additives which  
can impair the water softener.  
^ Place the provided funnel over the  
salt container. Carefully fill with salt.  
The salt container holds approx.  
4.5 lbs (2 kg) of salt. As it is filled,  
water will run out.  
^ Remove the lower basket and  
unscrew the salt container lid.  
When opening the salt container,  
water will run out. Open the  
container only to refill salt.  
^ Clean any excess salt from the  
threads of the container opening.  
Screw the lid on firmly.  
Important: The salt container must  
be filled with 2 quarts (2 l) of water  
before adding salt for the first  
time. Water does not have to be  
added with subsequent refills.  
^ If the dishwasher will not be used  
immediately, run the "Express"  
program. This will remove any traces  
of salt from inside the wash cabinet.  
Salt indicator  
^ When the "Salt" indicator comes on,  
refill the salt after the program is  
finished.  
After the container has been filled, the  
water softener is automatically  
reactivated the next time the  
dishwasher is started. The "Salt"  
indicator will be lit during this process.  
It will go out once the reactivation  
process is complete.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before using for the first time  
Rinse aid  
Rinse aid helps to prevent spotting on  
dishes and glassware.  
The rinse aid is filled in the reservoir  
and the set amount will be  
automatically dosed.  
,Filling the rinse aid reservoir with  
detergent will damage the reservoir.  
Only pour rinse aid formulated for  
residential dishwashers into the  
reservoir.  
^ Pour liquid rinse aid into the reservoir  
until it is visible on the surface of the  
screen.  
When using "Tab" detergents rinse  
aid is not needed.  
The rinse aid reservoir holds approx.  
3.7 oz (110 ml).  
Adding rinse aid  
^ Press on the flap until you hear it  
click shut. Failure to close it all the  
way allows water to enter the  
reservoir during the wash program.  
^ Clean any spilled rinse aid. The flap  
will remain closed during normal  
operation.  
Rinse aid indicator  
When the rinse aid indicator first comes  
on, there will be enough rinse aid left  
for 2 - 3 washes.  
^ Press the button in the direction of  
^ The rinse aid indicator on the control  
panel will light when the rinse aid  
reservoir needs refilling.  
the arrow until the flap springs open.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before using for the first time  
Adjusting the dosage  
The amount set can be recognized by  
the flashing rhythm of the "Rinse"  
indicator (see table):  
The dosage selector is preset to 3. This  
dispenses approximately 3 ml of rinse  
aid per program. It can be adjusted  
from 0 to 6.  
Dosage in ml  
Flashing rhythm  
"Rinse"  
– Use a higher setting if spots appear  
on dry glassware.  
0
1
2
3
4
5
6
-
Once  
– Use a lower setting if streaking  
appears on dishes or glasses.  
Twice  
3 times  
4 times  
5 times  
6 times  
^ Turn the dishwasher off "s".  
^ Press and hold the "Start / Stop"  
button and at the same time turn the  
dishwasher on "s". Hold the "Start /  
Stop" button until the "Start / Stop"  
indicator comes on.  
^ Select the desired setting with the  
"Start / Stop" button. Every touch of  
the button increases the level.  
If it does not come on, start over.  
The programmed dosage is saved.  
^ Press the "Delay Start" button three  
times.  
^ Turn the dishwasher off "s".  
The "Rinse & Hold" indicator flashes 3  
times in intervals.  
The rinse aid dosage is adjusted to  
3 ml by default.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the dishwasher  
^ The spray arms must not be blocked  
by items that are too tall or hang  
through the baskets. Check  
clearance by manually rotating the  
spray arms.  
,Do not wash items soiled with  
ash, sand, wax, grease or paint in  
the dishwasher.  
Ash and sand do not dissolve and  
will be distributed throughout the  
inside of the dishwasher.  
^ Place very small items in the cutlery  
tray or basket so they do not fall to  
the bottom of the wash cabinet.  
Wax, grease and paint will cause  
permanent discoloration and  
damage to the dishwasher.  
^ Food residue and spilled liquids  
should be cleaned from the sides of  
the dishwasher door. These are  
outside of the wash cabinet and are  
not cleaned by water from the spray  
arms.  
^ Scrape food from dishes before  
placing them in the dishwasher,  
rinsing is not necessary.  
^ Some foods contain natural dyes,  
e.g. carrots or tomatoes. Plastic items  
may discolor permanently if they  
come in contact with food dyes.  
^ All items can be placed anywhere in  
the baskets.  
^ Load dishes so that water can reach  
all surfaces. Do not place dishes or  
cutlery inside other pieces.  
^ Make sure that all items are securely  
positioned.  
^ Hollow items such as cups and  
glasses should be placed upside  
down in the baskets.  
^ To ensure good water coverage,  
tall, narrow and hollow items,  
i.e. vases or champagne glasses,  
should be placed in the center of the  
basket rather than in the corners.  
^ Concave based items such as mugs  
or bowls, should be placed at an  
angle so that water does not pool.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the dishwasher  
Items not recommended for  
dishwashing  
Glassware:  
– There are no standard guidelines for  
washing glassware, when in doubt  
wash by hand.  
– Cutlery with wooden handles  
– Wooden cutting boards  
– When purchasing new dishes,  
glasses and cutlery, make sure they  
are dishwasher safe. Only wash  
items marked "dishwasher safe" in  
the dishwasher.  
– Glued items such as old knives with  
handles glued together around the  
shank of the blade  
– Handmade craft items, antique,  
metal trimmed or decorative  
glassware  
– If fine glassware is washed in the  
dishwasher select the "China &  
Crystal" program*. This will reduce  
the risk of clouding.  
– Plastic items that are not heat  
resistant  
– Copper, brass, tin or aluminum  
Silver and aluminum:  
– Dishes with color painted over the  
glaze. These dishes may fade over  
time  
– Silver or aluminum items may tarnish.  
– Silverware previously cleaned with a  
silver polish may be damp or spotted  
at the end of a program where water  
has adhered to the polish. This can  
be rubbed off with a soft, dry cloth.  
Silver that has been cleaned in an  
immersion dip is usually dry at the  
end of a program, but may tarnish.  
– Fine glassware and crystal items  
should only be washed using the  
"China & Crystal" program*.  
Otherwise clouding or etching may  
occur after frequent washing.  
– Cast iron pots and pans  
– If left to dry, foods containing sulfur  
can discolor silver. These include  
egg yolk, onions, mayonnaise,  
mustard, fish and marinades.  
* depending on model  
– Silverware may tarnish or pit if  
washed next to stainless steel.  
Leave space between these metals.  
If unsure whether your china and  
crystal are dishwasher safe, please  
check with the manufacturer. The  
China & Crystal program, although  
extremely gentle and thorough can  
cause the china and crystal to "wear"  
if they are not dishwasher safe.  
– Clean aluminum items, e.g. grease  
filters, with domestic dishwasher  
detergent only.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the dishwasher  
Cutlery tray  
^ Arrange the cutlery as shown in the  
cutlery tray.  
Spoons with thick handles may have to  
be placed as knives and forks with their  
heads in the holders.  
For easier unloading cutlery should be  
grouped in zones, one for knives, one  
for forks, one for spoons, etc.  
Place knives with the cutting edge  
down and forks with the prongs  
between the holders. Spoons should be  
placed in the opposite direction with  
the handles between the holders so  
that water can run off more easily.  
The upper spray arm must not be  
blocked by tall cutlery items.  
The cutlery tray insert is removable.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the dishwasher  
Upper basket  
Coffee bar  
(depending on model)  
,Always use the dishwasher with  
the upper and lower basket inserted.  
Glasses can be leaned against the  
coffee bar for a secure stand.  
^ Load the upper basket with small,  
lightweight, or delicate items such as  
cups, saucers, glasses, dessert  
bowls and flat pans.  
^ The bar can also be used to separate  
two rows of glasses.  
To stack wide items, flip the bar to the  
right.  
^ Long items such as soup ladles,  
mixing spoons and long knives  
should be placed lying down across  
the front of the upper basket.  
Cup racks  
Raise the rack to make room for tall  
glasses. Lower it to double stack  
smaller pieces.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the dishwasher  
Adjusting the upper basket  
Depending on the setting of the upper  
basket, a variety of plate dimensions  
can be accommodated.  
The upper basket can be raised or  
lowered to accommodate tall items.  
For example: If the upper basket is in  
its highest position a plate with a  
diameter of 12 3/16" (31 cm) can be fit in  
the lower basket.  
The basket can also be angled to fit tall  
items in both, the upper and lower  
baskets. The angles should not be set  
to opposite extremes. This will block the  
middle spray arm. Take care when  
sliding the basket in and out in this  
position.  
^ Slide out the upper basket.  
^ Pull up the levers at the sides of the  
upper basket and adjust the basket  
height.  
^ Release the levers and the basket will  
lock in place.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the dishwasher  
Lower basket  
Foldable spikes  
The foldable spikes can be used for  
small plates and saucers.  
^ For larger and heavier items such as  
plates, serving platters, saucepans,  
bowls, etc.  
Two rows of spikes can be folded  
down, to create more room for larger  
dishware, e.g. pots, pans and bowls.  
Small plates and saucers can also be  
arranged in the lower basket.  
^ Press the yellow lever down a and  
fold down the spikes b.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the dishwasher  
Removable spike insert  
Removable PlateGuard Plus with  
StemGuard  
The spike insert can be removed in  
order to make room for larger tableware (depending on model)  
or to use a different insert.  
This insert is ideal for cups, glasses,  
Removing the insert a  
plates, bowls, pots and pans.  
^ To remove the insert, gently pull the  
^ To arrange tall items the cup rack  
handle upwards.  
can be raised.  
^ The stemguard can be used to hold  
the stems of glassware or coffee cup  
handles.  
Replacing the insert b  
^ Slide the hitches of the insert under  
the struts of the lower basket.  
^ Push down on the handle to snap the  
insert into position.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the dishwasher  
Vase / Bottle insert  
(depending on model)  
Removing the insert a:  
^ To remove the insert, gently pull the  
handle upwards.  
The vase / bottle insert can be used to  
rinse narrow items, e.g. vases, baby  
bottles, etc.  
Inserting the insert b:  
^ Place the insert into the lower basket.  
^ Place the insert into the lower basket  
as shown in the illustration. If placed  
anywhere else, water will not reach  
all surfaces. The item will not be  
properly cleaned.  
^ Slide the hitches of the insert under  
the struts of the lower basket.  
^ Push down on the handle to snap the  
insert into position.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basket accessories  
Additional inserts for the upper and lower baskets may be purchased from your  
Miele dealer or Miele. Depending on the model some accessories come standard  
with the machine.  
Glassware insert GGO  
To wash long stemmed glassware  
attaches to the upper basket  
Multi-function basket GMFO  
Cappuccinatore insert GCEO  
Tall glassware insert GGU  
Large diameter plate insert GTLU 35  
To wash saucers, baby bottles and  
small items  
To wash the parts of the  
Cappuccinatore  
To wash tall glassware in the lower  
basket  
To wash large plates with a maximum  
diameter of approx. 13 3/4" (35 cm).  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use  
Detergent  
You can use powder, gel or tab  
detergents. Follow the dosage  
information on the detergent  
packaging.  
,Dishwasher detergents contain  
irritant and corrosive ingredients.  
Avoid inhaling or swallowing  
dishwasher detergent.  
Detergent tabs are not recommended  
for use with the program "Express". The  
tabs may not dissolve completely.  
Keep children away from detergent.  
Fill the detergent dispenser only  
when you are ready to start the  
dishwasher.  
Dishwasher cleaning products are  
available from MIele.  
,Only use detergents formulated  
for domestic dishwashers.  
Use only the recommended amount  
of detergent. Continued use of too  
much detergent may cause machine  
damage.  
When using the "China & Crystal"  
program (depending on model)  
reduce the amount of detergent  
used to at least ½ of the normal  
dosage. Also make certain your  
china and crystal are dishwasher  
safe.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use  
Adding detergent  
^ Use one tab or add powder or gel  
detergent to compartment II and  
close the flap.  
^ To open, press the latch on the  
detergent dispenser. The flap will  
spring open.  
^ If a Pre-rinse is desired, and  
available for your chosen program,  
add 1 teaspoon (5 ml) of detergent to  
compartment I.  
The flap is always open at the end of a  
program.  
The horizontal marks in compartment II  
indicate the levels of approximately 1 ¼  
and 2 tablespoons (20 and 30 ml)  
respectively. Compartment I holds a  
maximum of 2 teaspoons (10 ml).  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use  
Turning on  
Selecting and starting a  
program  
^ Open the water supply, if closed.  
^ Open the door.  
Choose your program according to the  
type of load and soiling. See the  
^ Make sure the spray arms can rotate  
"Program Guide" for more information.  
freely.  
^ Select the desired program with the  
^ Turn the dishwasher on "K".  
"Program" button.  
The "Start / Stop" indicator flashes and  
the indicator next to the last program  
selected is lit.  
The program indicator of the selected  
program lights.  
^ Press the "Start / Stop" button.  
The program starts. The indicators for  
"Start / Stop", "Rinse" and the program  
selected will light up.  
If the function "Turbo" is selected, the  
relevant indicator will also light up.  
Cancel a program only in the first  
few minutes. Otherwise important  
program steps may be interrupted.  
Program sequence display  
After a program has been started the  
current stage of the program is  
indicated by the program sequence  
indicator.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Program guide  
Program  
When to use  
Program sequence  
Pre-  
rinse  
Main  
wash  
Interim  
rinse  
Final  
rinse  
Drying  
1
2
1
2
For normally soiled pots  
and pans with dried on  
food, also for heavily soiled  
dishware, use 120% of  
normal detergent amount  
Pots &  
Pans  
x
x
x
x
x
For normally soiled  
Normal  
x
x
x
x
x
x
x
dishware  
For temperature sensitive  
glassware and lightly soiled  
dishware, use 50 % of  
China &  
Crystal  
x
x
normal detergent amount  
Extended wash time,  
for sanitizing normally  
soiled dishware with  
dried on food  
SaniWash  
Express  
x
x
x
x
x
x
x
"Quick program" for lightly  
soiled dishware, e.g. party  
dishware includes sensor  
controlled Glasscare, not  
suitable for detergent tabs  
x
To rinse dishes when a  
complete program is not  
needed  
Rinse &  
Hold  
x
detergent is not  
recommended  
Usage:  
Electric: 0.01 - 1.23 kWh  
Water:  
1.3 - 5.23 gal (5 - 19 l)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28  
Use  
At the end of a program  
Preparing your appliance for  
an extended vacaion  
When the program has finished the  
"End" indicator lights.  
If you elect to turn off the water to your  
home for an extended period of time,  
please note that this may not be  
Dishes tends to chip if removed still hot  
from the dishwasher.  
enough to reduce the risk of a leak.  
Let the dishware cool.  
After turning off the dishwasher open  
the door slightly. The dishes will cool  
much faster.  
To be completely safe, you must  
turn off the water supply to each  
individual appliance. This means  
under the sink for a dishwasher, at  
the laundry bib for your washer, etc.  
^ Unload the dishwasher.  
Unloading the lower basket first will  
prevent water drops from the upper  
basket and cutlery tray (depending on  
model) from dropping onto dishes in  
the lower basket.  
^ Turn the dishwasher off "K".  
The dishwasher continues to use  
electricity until turned off with the "K"  
button.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use  
Interrupting a program  
Changing a program  
A program is interrupted as soon as the  
door is opened. If the door is closed,  
the program will continue from where it  
was interrupted.  
If the detergent flap is already open,  
do not change the program.  
If a program has already started and  
you wish to change it:  
,Open the door with care. The  
water in the dishwasher is hot.  
Danger of scalding. Before closing  
the door again, leave it ajar for  
approx. 20 secs. This will enable the  
temperature in the wash cabinet to  
settle. Close the door firmly until it  
clicks into place.  
^ Press and hold the "Start / Stop"  
button for at least one second.  
The program is canceled and "Start /  
Stop" flashes in the display.  
^ Select the desired program and start  
as usual.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional options  
Turbo  
Default settings  
The "Turbo" function can be used to  
reduce the program run-times, in  
programs in which the option is  
available.  
All settings can be reset to the factory  
default.  
^ Turn the dishwasher off "K".  
^ Press and hold the "Start / Stop"  
button and at the same time turn  
the dishwasher on "K". Hold the  
"Start / Stop" button until the indicator  
lights up.  
^ Turn the dishwasher on "K".  
The "Start / Stop" indicator flashes.  
^ Press the "Turbo" button.  
The "Turbo" indicator lights up.  
If it does not come on, start over.  
The option will remain active for all  
programs until the setting is changed  
again.  
^ Press the "Delay Start" button 12  
times.  
The "Rinse & Hold" indicator gives one  
long flash and two short flashes in  
intervals.  
^ A program can now be started as  
usual or the dishwasher can be  
turned off "K".  
The "Rinse" indicator lights up showing  
that a setting other than the factory  
default has been set.  
– If the "Rinse" indicator light is  
flashing:  
All settings are factory default.  
– If the "Rinse" indicator is not lit up:  
At least one setting has been altered  
from the factory defaults  
^ To reset the dishwasher to the factory  
default settings, press the "Start /  
Stop" button.  
The setting is saved.  
^ Turn the dishwasher off "K".  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional options  
Delay Start  
^ Press the "Start / Stop" button.  
The starting time of a program can be  
delayed. The start time can be delayed  
from 30 minutes to 24 hours.  
The Delay Start indicator lights up.  
The time will count down to the  
program start: in 1 hour increments for  
delay start times over 10 hours, and in  
1 minute increments delay start times  
under 10 hours.  
With a delay start time between 30  
minutes and 9 hours 30 minutes the  
delay is set in 30 minute increments.  
For 10 hours or more it is set in one  
hour increments.  
Once the delay start time has elapsed,  
the selected program starts. The  
display shows the remaining time, the  
"Delay Start" indicator goes out and the  
"Start / Stop" indicator lights up.  
When using the "Delay Start"  
function, make sure that the  
detergent compartment is dry before  
adding detergent. Wipe dry with a  
cloth if necessary. Otherwise the  
detergent could stick together and  
not completely rinse out.  
Delay start display  
Between 1 and 9 ½ hours:  
e.g. 5 hours = 5.0  
Gel detergent should not be used  
when selecting "Delay Start", the  
detergent could leak out of the  
compartment.  
10 hours and over:  
e.g. 15 hours = 15  
Starting a program before the delay  
start has elapsed  
^ Turn the dishwasher on "K".  
A program can be started before the  
delay start time has elapsed.  
The "Start / Stop" indicator flashes.  
^ Select the desired program with the  
^ Press and hold the "Start / Stop"  
"Program" button.  
button for at least one second.  
^ Press the "Delay Start" button.  
The "Delay Start" indicator goes out and  
The last set delay start time will show in the "Start / Stop" indicator flashes.  
the time display. The "Delay Start"  
^ Press the "Start / Stop" button.  
indicator lights up.  
The program starts and the "Start /  
^ Set the desired time with the "Delay  
Stop" indicator lights up.  
Start" button.  
If you press and hold the "Delay Start"  
button the time with automatically count  
up to 24^. To start again at 30 minutes,  
press the "Delay Start" button twice.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently asked questions  
With the aid of the following guide, minor problems can be fixed without a service  
call.  
,Repairs should only be carried out by a qualified and trained person in  
accordance with local and national safety regulations. Unauthorized repairs  
could cause personal injury or machine damage.  
Technical faults  
Issue  
Possible fault  
Solution  
The Start / Stop  
The machine is not  
Insert the plug.  
indicator does not flash plugged in.  
after the dishwasher is  
The fuse has tripped.  
Reset the circuit breaker.  
See data plate for  
turned on with "s".  
minimum amperage.  
The dishwasher stops  
during a program.  
The fuse has tripped.  
Reset the circuit breaker.  
See data plate for  
minimum amperage.  
The program cycle  
indicators "Rinse",  
"Drying" and "End"  
flash at the same time.  
There may be a technical – Turn the dishwasher off  
fault.  
"s".  
After a few seconds:  
– Turn the dishwasher on  
"s".  
– Select the desired  
program with the  
"Program" button.  
– Press the "Start / Stop"  
button.  
If the problem persists,  
contact Technical  
Service.  
The drain pump is  
The waterproof system  
– Turn off the water  
supply.  
running when the door has activated.  
is open.  
– Contact Miele  
Technical Service.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently asked questions  
Problems water Intake / Drain  
Issue  
Possible fault  
Solution  
The "Intake / Drain"  
indicator flashes.  
The water supply is  
closed.  
Open the water supply all  
the way.  
The dishwasher stops  
running.  
Before fixing the fault:  
– Turn the dishwasher off  
The "Intake / Drain"  
indicator flashes.  
"s".  
Water intake fault.  
– Open the water supply  
all the way.  
– Clean the water intake  
filter, see "User  
Maintenance  
Instructions".  
– The water pressure at  
the water connection is  
lower than 4.35 psi.  
Consult a plumber.  
Water drain fault.  
– Clean the triple filter.  
There may be water in the  
wash cabinet.  
– Clean the drain pump  
and the non-return  
valve.  
See "User Maintenance  
Instructions" for more  
information on the above.  
– Remove any kinks in  
the drain hose.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently asked questions  
General problems with the dishwasher  
Issue  
Possible fault  
Solution  
The display turns off.  
The dishwasher has  
gone into "Standby"  
mode to save energy.  
Press any button.  
The display turns on again.  
Detergent is left in the The dispenser was damp Dry the dispenser before  
dispenser at the end of when detergent was  
adding detergent.  
a program.  
added.  
The detergent lid  
cannot be closed  
properly.  
Detergent residue is  
blocking the catch.  
Remove the residue.  
The door and the  
This is not a fault!  
The moisture will evaporate  
interior walls are still  
It is the normal operating after a short time.  
wet after a program has mode of the drying  
finished.  
system.  
Water remains in the  
wash cabinet at the end  
of a program.  
Before fixing the fault:  
– Turn the dishwasher off  
"s".  
The triple filter in the  
Clean the triple filter. See  
wash cabinet is clogged. "User Maintenance  
Instructions".  
Clean the drain pump and  
non-return valve may be the non-return valve, see  
blocked. "User maintenance  
instructions".  
The drain hose is kinked. Remove any kinks from the  
drain hose.  
The drain pump or the  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently asked questions  
Sounds  
Issue  
Possible fault  
The spray arm is hitting an Interrupt the program,  
item in the basket. rearrange items blocking  
the spray arms.  
Solution  
There is a knocking  
noise in the wash  
cabinet.  
There is a rattling noise Items are not secure in the Interrupt the program and  
in the wash cabinet.  
wash cabinet.  
rearrange loose pieces.  
There is a knocking  
noise in the water  
pipes.  
This may be caused by  
the installation or the  
diameter of the pipe.  
This has no effect on the  
dishwasher. If in doubt  
contact a plumber.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently asked questions  
Poor cleaning results  
Issue  
Possible fault  
Solution  
The dishes are not The dishes were not loaded See "Loading the  
clean.  
correctly.  
dishwasher".  
The program was not  
powerful enough.  
Select a more intensive  
program, see "Program  
Guide".  
Not enough detergent was  
dispensed.  
Use more detergent, see  
"Adding detergent".  
The spray arms are blocked Turn the spray arm and  
by items. rearrange the dishes if  
necessary.  
The triple filter in the base of Clean the filter and insert it  
the wash cabinet is not clean correctly.  
or not correctly inserted. The Clean the spray arm jets.  
spray arm jets might be  
clogged.  
See "User Maintenance  
Instructions".  
The drain pump or the  
Clean the drain pump and  
non-return valve is blocked. the non-return valve, see  
Wash water will run back into maintenance instructions.  
the wash cabinet.  
Glasses and  
The rinse aid dosage is set Reduce the dosage, see  
cutlery show  
streaks. There is a  
bluish sheen on  
the surface of  
glasses and a film  
that can be wiped  
off.  
too high.  
"Before using for the first  
time".  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently asked questions  
Issue  
Possible fault  
Solution  
Dishes are still wet,  
The rinse aid setting may Increase the dosage, refill  
glasses and cutlery are be too low, or the rinse  
spotted. aid reservoir is empty.  
the reservoir or switch the  
rinse aid product when  
refilling, see "Before using  
for the first time".  
Dishes were taken out too Leave dishes in longer,  
soon.  
see "Use".  
A "Tab" product was  
used. These products  
Use a normal (powder or  
gel) detergent and add  
have a low drying effect. rinse aid.  
White residue is visible Not enough rinse aid was Increase the dosage, see  
on cutlery and dishes.  
Clouding occurs on  
glassware and film can  
be wiped off.  
used.  
"Before using for the first  
time".  
A "Tab" product was  
used.  
Use a normal (gel or  
powder) detergent.  
The salt container is  
empty.  
Refill the salt container,  
see "Before using for the  
first time".  
The salt container lid was Reseat it making sure it  
not correctly screwed on. screws back on correctly.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently asked questions  
Issue  
Possible fault  
Detergent deposits.  
Solution  
Glasses are  
Use a different detergent.  
discolored and the  
film cannot be wiped  
off.  
Clouding or etching  
on glasses.  
Possible causes may be : See the relevant section of  
excessive rinse aid or type this manual to:  
and amount of detergent.  
– adjust the rinse aid  
Any one or a combination  
dosage,  
of these faults may be to  
– change the type and/or  
blame.  
adjust the amount of  
detergent used,  
– connect the dishwasher  
to a cold water supply.  
Glasses are dull and Glasses are not  
discolored, film dishwasher safe.  
cannot be wiped off.  
Tea or lipstick stains The wash temperature of  
have not been  
completely removed. too low.  
The detergent has a low  
There is no remedy. Only  
wash dishwasher safe  
glasses in the dishwasher.  
Select the ""SaniWash"  
the selected program was program.  
Use a different detergent.  
bleaching effect.  
Plastics are  
discolored.  
Natural dyes e.g. from  
vegetables may be the  
cause. Not enough  
Use more detergent, see  
"Adding detergent".  
Discoloration is permanent.  
detergent was used to  
break down natural dyes.  
There are rust stains The affected items are not There is no remedy. Only  
on cutlery. corrosion resistant. wash dishwasher safe  
cutlery in the dishwasher.  
No program was run after Start the "Express" program  
refilling salt. Salt residuals without a load after refilling  
got in the wash cycle. salt.  
The salt container lid was Reseat and screw the lid  
not screwed on properly. on firmly.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Comparison Tests  
10 place settings, Standard program: Normal  
Upper basket  
Lower basket  
Cutlery tray  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Comparison Tests  
16 place settings, Standard program: Normal  
Upper basket  
Lower basket  
Cutlery tray  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
After sales service  
Repairs  
MieleCare  
In the event of a fault which you cannot  
correct yourself please contact the  
Miele Service Department at the phone  
number on the back of this booklet.  
(USA only)  
MieleCare, our Extended Service  
Contract program, gives you the  
assurance of knowing that your  
^ Please quote the model type and  
appliance investment is covered by  
5 years of worry free ownership.  
MieleCare is the only Extended Service  
Contract in the industry that guarantees  
repairs by a Miele Authorized Service  
Provider using genuine Miele parts.  
Only genuine Miele parts installed by  
factory trained professionals can  
guarantee the safety, reliability, and  
longevity of your Miele appliance.  
number of your appliance.  
These can be found on the data plate  
along the right edge of the door.  
PC Update  
The Program Correction (PC) allows a  
technician to update the dishwasher to  
make use of new technology.  
Please note that unless expressly  
approved in writing by Miele’s Service  
department, Extended Service  
Contracts offered by other providers for  
Miele products will not be recognized  
by Miele. Our goal is to prevent  
unauthorized (and untrained) service  
personnel from working on your Miele  
products, possibly doing further  
damage to them, you and/or your  
home.  
When, for example, technological  
developments offer advanced  
modifications to your existing program  
cycles a service technician will be able  
to input these into your machine  
controls via the indicator light marked  
PC. Miele will provide information when  
such possibilities become available.  
To learn more about MieleCare  
Extended Service Contracts, please  
contact your appliance dealer or visit  
us online at:  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Transport  
To transport the dishwasher, e.g. when  
moving to a new home, note the  
following:  
– Empty the dishwasher.  
– Secure any loose parts, e.g. hoses,  
cables, cutlery baskets.  
– Transport the dishwasher in the  
upright position. If unavoidable it  
may be transported on its back. Do  
not transport it on its side or on the  
door. Residual water in the machine  
could leak and cause electrical  
damage.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Maintenance Instructions  
To prevent accidents  
and appliance damage,  
read these instructions  
before  
installation or use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and Care  
Exterior  
Check and clean your dishwasher  
regularly. This will help avoid  
problems and faults.  
^ Only use a conditioner suitable for  
your kitchen cabinetry.  
^ Clean wood only with a damp cloth  
and wipe dry.  
,Abrasive cleaning agents,  
all-purpose cleaners, thinner or  
ammonia based cleaners should not  
be used on the dishwasher.  
Clean the exterior with a solution of  
warm water and liquid soap applied  
with a soft sponge. Dry with a soft  
cloth.  
They will damage the surface.  
Wash cabinet  
Glass cleaners may be used to  
clean the exterior. However do not  
allow them to sit or "puddle", this can  
cause damage to the surface.  
Remove the cleaner promptly.  
Generally, the wash cabinet is self  
cleaning if the correct amount of  
detergent is used.  
The wash cabinet can be cleaned with  
a dishwasher cleaner such as "Dis  
Cleaner" available from your Miele  
To better maintain your appliance  
avoid the following:  
– cleaners containing soda, ammonia,  
thinners, or chlorides  
Door and the door seal  
^ Wipe the door seals regularly with a  
– cleaners containing descaling  
agents or lime removers,  
damp cloth to remove food deposits.  
^ Food residue and spilled liquids  
should be wiped from the sides of the  
dishwasher door. These are outside of  
the wash cabinet and are not cleaned  
by water from the spray arms.  
– abrasive cleaners,  
– stainless steel cleaners,  
– dishwasher soap (powder),  
– caustic (oven) cleaners,  
– scouring pads, steel wool, hard  
brushes,  
Control panel  
^ The plastic control panel should only  
be wiped with a damp cloth or  
suitable cleaning agent designed for  
use on plastic.  
– metal scrapers.  
, The appliance front and controls  
are not scratch proof.  
Remove spills immediately.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and Care  
Triple filter system  
The triple filter system in the base of the  
wash cabinet prevents food from being  
redeposited on dishes. It also protects  
the circulation pump from damage  
caused by foreign objects (e.g. broken  
glass, bones). During normal use, the  
filter system is self-cleaning.  
,The machine must not be used  
without all the filters in place!  
^ Check and clean the filter system  
periodically for any trapped or  
foreign objects.  
^ Turn the handle counterclockwise to  
release the triple filter system a.  
The level of soiling and time it takes  
before the filters need cleaning will vary  
depending on your household usage.  
^ Lift the filter combination out of the  
machine b. Remove any solid  
particles and rinse under running  
water. Scrub with a nylon brush if  
necessary.  
^ Turn off the dishwasher before  
cleaning.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and Care  
To clean the inside of the filter, the flap  
must be opened.  
^ Return the filter so it lies flat in the  
base of the wash cabinet.  
^ Push the clips together a and open  
the flap b.  
^ Lock the filter by turning the handle  
clockwise.  
^ Rinse under running water.  
,The triple filter system must be  
inserted and locked into place.  
Large particles could get in the  
circulation system and cause a  
blockage.  
^ Close the flap so that the clip  
engages.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and Care  
Cleaning the spray arms  
Sometimes particles of food get stuck  
in the spray arm jets. The spray arms  
should be inspected and cleaned every  
4 - 6 months.  
^ Turn off the dishwasher before  
cleaning.  
Removing the spray arms  
^ Remove the cutlery tray (if present).  
^ Push the upper spray arm up to  
engage the inner ratchet and  
unscrew the spray arm.  
^ Pull the lower spray arm firmly  
upwards to remove.  
^ Lift up the middle spray arm, a, to  
engage the ratchet and unscrew the  
spray arm, b.  
^ Use a pointed object such as a  
toothpick to push food particles into  
the spray arm jets.  
^ Remove the lower basket.  
^ Rinse thoroughly under running  
water.  
^ Return the spray arms and check that  
they rotate freely.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and Care  
Cleaning the water inlet filter  
A filter is incorporated into the intake  
hose attached to the dishwasher’s shut  
off valve. If your water is hard or the  
pipes contain sediment, this filter may  
clog and prevent enough water from  
entering the wash cabinet.  
,The plastic housing of the water  
connection contains electrical  
wiring.  
Do not cut the intake hose or  
submerge it in liquid.  
^ Carefully remove the rubber seal.  
Installing an in-line water filter  
^ Remove the filter using needle nose  
pliers and rinse it under running  
water.  
If your water contains a large number of  
insoluble substances, a filter between  
the water valve and the intake hose  
connection is recommended. These  
filters can be purchased from Miele.  
^ Reinsert the filter and seal. Make sure  
they are seated correctly.  
^ Screw the intake hose back on the  
water valve, checking that it is not  
cross-threaded.  
Cleaning the filter  
^ Turn off the dishwasher and pull the  
plug.  
^ Slowly turn on the water supply and  
^ Turn off the water supply.  
test for leaks.  
^ Unscrew the intake hose.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and Care  
Cleaning the drain pump and  
non-return valve  
If the dishwasher is not completely  
drained at the end of a program, the  
drain pump or non-return valve may be  
blocked.  
^ Turn off the dishwasher and pull the  
plug.  
^ Remove the triple filter (see "Triple  
filter system").  
^ Use a cup or bowl to scoop water out  
of the wash cabinet.  
The drain pump is beneath the  
non-return valve (see arrow).  
^ Remove all foreign objects from the  
drain pump (glass or bone splinters).  
^ Before returning the non-return valve,  
check that the drain pump is not  
blocked. Spin the propeller several  
times in both directions to check for  
obstructions.  
^ Carefully reinsert the non-return valve  
and secure it with the locking clamp.  
,Make sure the locking clamp  
clicks into place!  
^ Tilt the locking clamp to the side a.  
^ Pull out the non-return valve b and  
rinse it under running water.  
^ Remove all foreign objects from the  
non-return valve.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation Instructions  
Please refer to the Installation Diagram supplied with these instructions.  
To comply with IEC sound testing protocols, please contact Miele for additional  
instructions.  
Information is subject to change. Please refer to our website to obtain the most  
current product specification, technical & warranty information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Electrical connection  
,Installation, repairs and other  
work by unqualified persons could  
be dangerous.  
,Improper connection of the  
equipment grounding conductor  
can result in electric shock. Do  
not modify the plug provided with  
the appliance; if it will not fit the  
outlet, have a proper outlet  
Check that the voltage, frequency  
and fuse rating shown on the data  
plate match the household mains  
supply.  
installed by a qualified electrician.  
If there is any question  
concerning the proper electrical  
connection or grounding of this  
appliance to the power supply,  
please consult a licensed  
The power outlet must be accessible  
after installation. Do not use an  
extension cord to connect the  
dishwasher to the mains. Danger of  
overheating! See data plate on the  
right side of the door.  
electrician or call Miele’s  
Technical Service Department:  
U 1-800-999-1360  
A damaged power cord must only  
be replaced with a genuine Miele  
cord by a Miele service technician.  
V 1-800-565-6435  
Specifications  
The dishwasher comes equipped with a  
4 ft (1.2 m) power cord with a molded  
plug for connection to 120 V, 60 Hz,  
15 A grounded receptacle.  
GROUNDING INSTRUCTIONS  
THIS APPLIANCE MUST BE  
GROUNDED.  
In the event of a malfunction or  
breakdown, grounding will reduce the  
risk of electric shock by providing a  
path of least resistance for the electrical  
current. This appliance is equipped  
with a cord having an equipment  
grounding conductor and a grounding  
plug. The plug must be plugged into an  
appropriate outlet that is installed and  
grounded in accordance with all local  
codes and ordinances.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Plumbing  
Waterproof system  
,To prevent damage to the  
All Miele dishwashers have a safety  
valve located on the incoming water  
line and a sealed underside with a  
water sensor. If a fault occurs, the water  
intake is stopped and the drain pump is  
activated.  
dishwasher, it must only be  
connected to a fully vented drainage  
system.  
Connection to the water  
supply  
,Do not drink water from the  
dishwasher!  
– The dishwasher can heat its own  
water to the temperature required by  
the wash program. This allows for  
connection of the machine to either a  
hot or cold water source. For lowest  
energy consumption connect the  
dishwasher to a cold water source.  
For fastest possible wash times, with  
slightly higher energy consumption,  
connect the dishwasher to a hot  
water source. All programs use hot  
water in the rinse cycles.  
,Do not cut the intake hose. It  
contains electrical wiring. If the hose  
is cut, the dishwasher will not work.  
There will be a water leak and you  
could be injured. If the hose is too  
long, coil it neatly and place it  
behind the machine.  
– The inlet hose is approximately 5 ft.  
(1.5m) long.  
– A 5 ft. (1.5m) drain extension is  
available from Miele.  
– The water inlet hose comes  
equipped with a 3/4" female hose  
thread connector. This can be  
directly connected to a water supply  
with 3/4" MHT (male hose thread  
ends).  
– Water pressure: Must be between  
4.5 - 145 psi (0.3 - 10 bar).  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Plumbing  
Drainage  
Venting the drainage system  
– The machine comes equipped with a If the dishwasher drain hose is  
built-in non-return valve on the  
discharge side to prevent waste  
water from flowing back into the  
dishwasher.  
connected to a floor drain or to a drain  
pipe that is less than 8" (20 cm) above  
the floor, the drain must be vented.  
Otherwise the water inside the  
dishwasher may siphon out during the  
wash program.  
– The dishwasher is equipped with a  
5 ft (1.5 m) flexible drain hose with an  
internal diameter of 7/8" (22 mm).  
^ Open the dishwasher door and  
remove the lower basket.  
– Drain hose extensions and adapters  
can be ordered from Miele.  
The maximum drain hose length is  
13 ft. (4 m), max. drain height: 39"  
(1 m).  
^ Pull the lower spray arm firmly  
upwards to remove.  
– If the hose is to be directly fitted to  
the drainage outlet on site, use the  
supplied hose clip (see assembly  
plan).  
– The hose can be installed to the left  
or right side.  
– The existing drain pipe for the drain  
hose is designed for various hose  
diameters. The drain pipe must be  
shortened if the drain pipe extends  
too far into the drain hose. The drain  
hose could get clogged.  
^ Cut off the vent cap located at the  
right rear of the triple filter system, as  
illustrated.  
– The drain hose must not be  
shortened.  
,Make sure the hose is installed  
without kinking, pressure or being  
pulled.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Alteration rights reserved / 1911  
G 2143  
M.-Nr. 07 724 060 / 02  
INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST  
CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

MTD Log Splitter 24632 8 User Manual
Napoleon Grills Charcoal Grill PRO22K LEG User Manual
Nikon Camcorder D2H User Manual
NordicTrack Home Gym NTL23920 User Manual
Nordyne Furnace G6RC 90+ User Manual
NuTone Outdoor Cart Hampton Series User Manual
NuTone Ventilation Hood NS6500 Series User Manual
Omron Scale BF400 User Manual
Panasonic Automobile Parts HRT User Manual
Panasonic Telephone KX T7720 User Manual