Miele Cooktop H 212 B User Manual

Operating instructions  
H 212 B oven  
H 212 E cooker  
It is essential to read these  
operating instructions before  
installing or using the machine,  
to avoid the risk of accident,  
or damage to the machine.  
Q\@ä}  
M.-Nr. 04 325 741  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Description of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Safety feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Before using for the first time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Hobs  
Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Oven  
Description of the systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Use of the clock / timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Applications  
– Baking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
– Roasting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
– Defrosting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
– Casseroles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
– Grilling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Maintenance  
Cleaning and care  
– Ceramic hobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
– Enclosed hotplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
– Appliance front, controls, accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
– Oven interior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
Correcting minor faults. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50  
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53  
Extra accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Installation / Electrical connection  
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55  
Installation  
– Ceramic hob . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58  
– Hob with enclosed hotplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60  
– Oven with hob controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62  
– Oven . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of the appliance  
H 212 E  
bIndicator light for oven heating  
cControl light for hob cooking areas  
dOven function selector  
eOven temperature selector  
fTimer  
gcooking zone control: front left  
hcooking zone control: back left  
icooking zone control: back right  
jcooking zone control: front right  
kFacia panel  
oRunner heights 1, 2, 3, 4, 5  
lData plate  
pDoor contact switch  
mHeating element for top heat and grilling qOven door with ventilation  
with guard plate  
nAir inlet for fan  
rOven door locking  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of the appliance  
H 212 B  
bIndicator light for oven heating  
cOven function selector  
dOven temperature selector  
eTimer  
Accessories  
– 2 baking trays  
Please note  
– dual purpose grill pan / oven tray  
This page shows the control panel of  
the H 212 B.  
– Non-tip rack for baking, roasting  
or grilling  
Details of the oven interior and door  
illustrated on the previous page also  
refer to the H 212.  
– Roasting filter  
to be attached in front of the fan  
aperture before fan oven roasting  
For “B” model ovens, only the instruc-  
tions relating to ovens are applicable.  
The instructions for hobs relate to “E”  
model ovens with hob controls, or to  
the hob of a free-standing cooker.  
Data plate for hob  
A second data is supplied with the  
hob, as the one on the appliance is not  
visible after installation. Please stick  
this into the space provided on the  
“After Sales Service” page for future  
reference.  
The droplets of fat caught up in the  
circulating air are deposited on the  
roasting filter. This helps to keep the  
oven and especially behind the inte-  
rior back wall cleaner.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and Safety instructions  
Technical safety  
This appliance complies with all  
relevant legal safety requirements.  
Improper use of the appliance can,  
however, present a risk of both per-  
sonal injury and material damage.  
Before connecting the appliance  
to the mains supply make sure that  
the voltage and frequency correspond  
to the rating on the data plate. Consult  
a competent person if in doubt.  
Before installation and before using  
the appliance for the first time, read  
the operating instructions carefully.  
They contain important notes on  
safety, on the operation and care of  
the appliance. This way you will  
avoid the risk of accidents and dam-  
age to the appliance.  
Do not let children access the ap-  
pliance or its controls. Supervise its  
use by the elderly or infirm.  
Keep these instructions in a safe  
place and pass them on to any fu-  
ture user.  
The electrical safety of this ap-  
pliance can only be guaranteed  
when continuity is complete between  
the appliance and an effective earthing  
system, which complies with local and  
national regulations. It is most import-  
ant that this basic safety requirement is  
tested by a qualified electrician. The  
manufacturer cannot be held respon-  
sible for the consequences of an inade-  
quate earthing system.  
This appliance must only be oper-  
ated as a built-in appliance. This is  
necessary to ensure that all electrical  
components are shielded.  
Correct usage  
Installation work and repairs may  
only be carried out by suitably  
qualified and competent persons to en-  
sure safety. Repairs and other work by  
unqualified persons could be dan-  
gerous.  
The appliance is intended for do-  
mestic use to cook food, and in  
particular to bake, roast, defrost, cook,  
dry fruit etc, and to grill. Any other  
usage is at the owner’s risk and could  
be dangerous. The manufacturer can-  
not be held responsible for damage  
caused by improper use of the ap-  
pliance.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and Safety instructions  
The appliance is only completely  
isolated from the electricity supply  
when:  
Oven  
Use of heat-resistant oven gloves  
is recommended:  
– it is switched off at the wall socket  
– or the mains fuse is withdrawn  
– or the screw-out fuse is removed (in  
countries where this is applicable)  
– when placing food in the oven, turn-  
ing or removing it.  
When working with “Conventional” heat-  
ing or when grilling, the element in the  
roof of the oven and the guard become  
very hot, and there is a danger of being  
burnt.  
Do not connect the appliance to  
the mains electricity supply by an  
extension lead.  
Extension leads do not guarantee the  
required safety of the appliance.  
Wait until the grill element has  
cooled down before lowering it for  
cleaning, to avoid the danger of burn-  
ing.  
Use  
Do not use force to pull it down as  
this can cause the element to  
break.  
Caution, danger of burning.  
High temperatures are produced by  
the oven and the hob cooking areas.  
Do not heat up unopened tins or  
jars of food in the oven, as press-  
ure will build up and they will explode.  
Great care should be taken to en-  
sure that small children do not  
touch the appliance when it is being  
used. The hob and also external parts  
of the oven such as the door glass,  
vents and control panel can become  
quite hot. Turn pan handles away from  
the edge to prevent children from pull-  
ing pans over.  
Do not push pots and pans around  
on the oven floor as this could  
damage the surface.  
Do not lean or sit on the open oven  
door, or place heavy items on it.  
This could damage the appliance. Take  
care in the region of the hinges. The  
oven door can support a maximum  
load of 10 kg.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and Safety instructions  
Cover any food which is left in the  
Ceramic hobs  
oven to be kept hot. This avoids  
the food drying out. It also prevents  
steam condensing and possibly lead-  
ing to moisture damage in the oven.  
When switched on the cooking  
areas heat up. A residual heat indi-  
cator shows whether a cooking zone is  
hot.  
If food is left in the oven after cook-  
ing, e.g. to take advantage of the  
residual heat, turn the temperature se-  
lector switch to “0°C”. Leave the func-  
tion selector switch at the position set.  
In the event of any breakages or  
cracks occurring in the ceramic  
hob it must be switched off immediate-  
ly and disconnected from the electricity  
supply.  
Do not switch the appliance off until the  
food has been removed. Otherwise  
there may be a build-up of condensa-  
tion which could adversely affect the  
oven interior, and externally the control  
panel, the worktop surface or surround-  
ing kitchen furniture.  
Contact the Service Department.  
Do not use the hob until the damaged  
ceramic plate has been replaced.  
Continued use would be dangerous as  
liquids etc. boiling over could pene-  
trate to the electrical components  
through any crack.  
Put any deep frozen products such  
as pizza on baking paper on the  
Do not use the hob as a resting  
place for any other objects.  
rack. Do not place them on the baking  
tray or grill pan. This could cause the  
metal to distort to such an extent that it  
might be difficult to remove the  
tray/pan from the oven. The distortion  
would increase with subsequent use.  
This could lead to a danger of the ar-  
ticle catching fire or melting if there is  
any residual heat.  
Do not drop anything on the ce-  
ramic hob.  
Even a light object such as an egg  
cup, could cause damage in certain cir-  
cumstances.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and Safety instructions  
Do not allow either solid or liquid  
General notes  
Under no circumstances use a  
sugar or pieces of plastic or alu-  
mium foil to get on to the cooking  
zones when they are hot. If this should  
occur, turn to a lower setting but do not  
switch off. Immediately scrape off all  
the sugar, plastic or aluminium remains  
from the hob with a shielded razor  
blade scraper, taking care not to burn  
yourself. If these residues are allowed  
to cool before the hob surface has  
been cleaned, the ceramic surface will  
be susceptible to pitting or even crack-  
ing.  
steam cleaner to clean this ap-  
pliance. Pressurised steam could give  
rise to a short circuit, or cause perma-  
nent damage to the surface and to  
components, for which the manufac-  
turer of the oven cannot accept any  
responsibility.  
Do not leave the appliance unat-  
tended when cooking with oils and  
fats as these can be a fire hazard if  
allowed to overheat.  
Do not use plastic or aluminium foil  
containers. These melt at high tem-  
peratures. Additionally they could dam-  
age a ceramic hob as they melt.  
Do not use any pots or pans on the  
ceramic hob with bases with pro-  
nounced edges or ridges.  
These could scratch or scour the hob  
surface permanently.  
Do not use the oven to heat up the  
room. Due to the high tempera-  
tures radiated, objects left near the  
oven or hob could catch fire.  
Enclosed hotplates  
Avoid allowing liquids or foods con-  
taining salt to spill onto a stainless  
steel hob or trim. Should this happen  
wipe up any spillages containing salt  
immediately, to avoid corrosion.  
When using kitchen appliances  
connected to sockets near the  
oven, ensure that the cable cannot  
come in contact with the hot cooking  
zones or get trapped in a hot oven  
door, which could melt the cable insula-  
tion and be dangerous.  
Do not use covers on the enclosed  
hotplates.Turning on the hotplate  
with the cover still in place could dam-  
age the hotplate. Putting a cover on a  
damp hotplate could lead to damage  
of the hotplate. Condensation trapped  
under the cover could cause corrosion.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and Safety instructions  
Always ensure that food is suffi-  
ciently cooked or reheated. Many  
factors will affect the overall cooking  
time, including the size and amount of  
food, its temperature, changes to the  
recipe and the shape and size of cook-  
ing container. Some foods may contain  
micro organisms which are only de-  
stroyed by thorough cooking, therefore  
when cooking or reheating foods, e.g.  
poultry, it is particularly important that  
food is fully cooked through. If in doubt  
select a longer cooking or reheating  
time.  
Keep these instructions in a safe  
place and pass them on to any  
future user.  
Disposal of your old machine  
Before discarding an old machine  
switch off and disconnect it from  
the power supply. Cut off and render  
any plug useless.  
Cut off the cable directly behind the  
machine to prevent misuse.  
It is important that the heat is  
allowed to spread evenly throug-  
hout the food being cooked.  
This can be achieved by stirring and/or  
turning the food, and by observing a  
sufficiently long standing time, which  
should be added to the time needed  
for cooking, reheating or defrosting.  
The manufacturer cannot be held  
liable for damage caused by non-  
compliance with safety instructions.  
In countries which may be subject  
to infestation by cockroaches or  
other vermin, pay particular attention to  
keeping the appliance and its surround-  
ings in a clean condition at all times.  
Any damage which might be caused  
by cockroaches or other vermin will not  
be covered by the appliance guaran-  
tee.  
Use of accessories  
After using the scraper ensure the  
blade is shielded before putting it  
away.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety feature  
When you shut the oven door the lock  
catch will automatically engage.  
Oven door locking  
(Exception: appliances in stainless  
steel and with a bowed handle in the  
Classic range.)  
A lock is incorporated in the oven door.  
This makes it difficult for children to  
open the oven door.  
To activate the door lock proceed as  
follows:  
Open the door completely.  
To open the oven door hold under the  
handle and push the lever to the right.  
The door is now unlocked and can be  
opened.  
If the door lock is not needed:  
Open the door.  
Push the lock catch to the left into  
the neutral position.  
Press the flat lever downwards.  
This releases the lock catch which  
springs up.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before using for the first time  
Timer  
Oven  
Use a cloth to wipe out the oven  
interior with a warm water and deter-  
gent solution. Polish dry with a dry  
cloth.  
Do not close the oven door until the  
oven interior is dry.  
Rinse the accessories.  
After the appliance has been switched  
on “0 00" and ”AUTO" flash in the dis-  
play.  
Setting the time of day  
(24 hour display)  
Press the buttons “g” und “)” at  
the same time.  
“0 00" and ”AUTO" continue to flash.  
Enter the time of day in  
hours minutes with the – /+ button.  
Fit the side rails supplied.  
As soon as the – /+ button is pressed  
in, the symbol “@” lights up and  
stays on.  
When the time of day has been en-  
tered, the clock advances minute by  
minute.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before using for the first time  
New appliances have a slight smell on  
first use. Running the oven for an hour  
at a high temperature makes it dissi-  
pate more quickly.  
Ceramic hob  
Thoroughly clean the ceramic hob be-  
fore use, then clean regularly after use  
when just warm to the touch, or cold.  
Turn the oven function selector to  
“Fan Heat D”.  
There might be a slight smell on first  
use due to the drying effect.  
Select the highest temperature.  
The timer can be used to set the finish  
time.  
Enclosed hotplates  
For the first few times of using a smell  
will occur.  
Ensure the room is well-ventilated  
during this process.  
Heat the hotplates for about 5  
minutes at the highest setting.  
Do not place a pan on them.  
The protective coating which prevents  
the build-up of rust will smoke slightly  
as it hardens.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hob controls  
The controls for the cooking zones / hot-  
plates regulate the heat output.  
Suggested hob settings  
Setting  
1 - 2  
Only turn the controls in a clockwise  
direction until a resistance is felt,  
and back again.  
Turning them in the other direction  
will damage them.  
Melting butter,  
Chocolate  
Dissolving gelatine  
Preparing junket and yoghurt  
Keeping food warm  
Warming small quantitites of  
food/liquid  
Thickening sauces containing  
egg yolk, butter  
Omelettes  
1 - 3  
When the control is turned to a setting,  
the control lamp for the cooking area  
lights up. This goes out when the hob  
control is turned to “0".  
Defrosting deep frozen items  
Cooking rice, pasta,  
porridge,  
Steaming fruit, vegetables,  
Cooking broths, pulse soups  
Cooking  
3 - 5  
Choose a high setting number for  
boiling/frying.  
Braising meat, fish,  
vegetables  
Cooking dumplings, potatoes,  
soups  
Preparing jams, jellies, stewed  
fruit  
Switch to a lower setting to continue  
cooking, when steam is visible at the  
rim of the lid.  
4 - 6  
Frying chops, liver, sausage,  
fish, eggs  
Switching to a lower setting at the right  
time:  
7 - 10  
– avoids pans boiling over,  
– food sticking,  
– and saves electricity.  
Frying pancakes, dropped  
scones and  
other liquid batters  
Frying steaks  
9 - 12  
Deep frying (chips, fritters)  
Boiling water  
These figures, which envisage approx. 4 help-  
ings, should only be taken as a guide. With  
deep pans, large quantities, or without the lid  
on, a higher setting is needed. With smaller  
quantities select a lower setting.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hobs - description  
Ceramic hobs  
Turn the controls in a clockwise di-  
rection only to the symbol "n", and  
allow to spring gently back again.  
Otherwise the control will be dam-  
aged.  
Diameter of cooking zones  
The cooking zones are clearly marked  
on the hob. Only the zone that is  
switched on heats up. The surround  
remains relatively cool.  
Then select the setting required.  
Turning the zone control back to "0"  
switches off:  
Residual heat indicator  
– the cooking zone, and  
Each cooking zone has a residual heat  
indicator. When the zone has been  
turned on, the indicator light comes on  
when the zone reaches a certain tem-  
perature. The indicator goes out when  
the heated surface of the hob is cool  
enough to touch.  
– the extended area.  
Enclosed hotplates  
On hobs with enclosed hotplates, there  
are two different sizes and perfor-  
mance levels of hotplate.  
Extended area n  
Some hobs have an area for resting hot  
pans.  
The cooking zone control is also used  
to switch on the extended area of the  
left hand cooking zone.  
An indicator light comes on to show  
when the extended area has been  
chosen.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hobs - use  
Size of pan  
Choice of suitable pans  
Attention to correct choice and use of  
pans  
– will help you obtain the best cooking  
result most economically,  
– and generally avoid food boiling  
over and sticking.  
The diameter of the saucepan or frying  
pan should be very slightly larger than  
that of the hotplate/cooking area.  
Pan bases  
Pan lids  
For maximum economy of electricity  
when cooking or frying, only use pans  
with a flat or very slightly concave  
base. When hot the pan will rest evenly  
on the hob. Modern saucepans for elec-  
tric cookers are the most suitable and  
efficient for use on ceramic cooking  
zones, or solid hotplates.  
Cooking with the lid on the pan retains  
the heat.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hobs - use  
Notes on the use on hobs  
Aluminium or stainless steel pans  
with aluminium bases can leave  
marks with a metallic sheen on the  
ceramic surface. Clean these away  
at the earliest opportunity, (see Sec-  
tion on Cleaning and Care).  
(both ceramic and enclosed hot-  
plates)  
Before switching on, place a saucepan  
containing water or food to be cooked  
on the hotplate or cooking area. This  
prevents unnecessary use of energy or  
the hotplates warping or burning them-  
selves out.  
Never leave boiled-over sugar or sy-  
rups, plastic items or aluminium foil  
on the hob. If this does happen,  
turn the hob to a lower setting, but  
on no account switch it off. Use a  
shielded scraper blade to scrape  
off the sugar, plastic or foil residue  
thoroughly.  
Before starting to cook, make sure that  
the hotplates or cooking areas and the  
base of saucepan are clean and dry.  
This saves extra cleaning later on.  
Additional notes for ceramic hobs  
Take care before starting to cook  
that there is no grit or sand on the  
surface of the hob.  
If these residues are allowed to cool be-  
fore the hob surface has been cleaned,  
the ceramic surface will be susceptible  
to pitting or even cracking.  
This would scratch the surface, espe-  
cially if a pan was pushed across.  
Additional notes for enclosed hot-  
plates  
Do not use any pots or pans where  
the base has ridges or a pro-  
nounced edge.  
Do not lay anything wet or damp  
across the hotplates.  
These could also cause scratches.  
If this does however happen, wipe the  
hotplate clean and switch on briefly to  
dry. This is necessary to avoid corro-  
sion.  
Do not push roasting tins or baking  
trays etc across the ceramic sur-  
face. Scratches could occur.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of the systems  
Fan Heat D  
Conventional heating A  
This system works by the circulation of  
heated air.  
With this conventional method of heat-  
ing, radiant heat is directed on the food  
from above and below.  
A fan situated on the back wall of the  
oven sucks in the air, heats it over a  
ring element and blows the heated air  
through the carefully spaced openings  
in the rear panel of the oven.  
Pre-heating the oven is only necessary  
when  
– baking cakes or baking with a short  
cooking time.  
– baking sensitive doughs.  
– roasting a joint of meat, fillet.  
The oven does not usually need to be  
pre-heated as the heated air reaches  
the food straight away.  
Exception: Pre-heat the oven when  
roasting sirloin.  
Grill ,  
The inner part of the upper heating ele-  
ment acts as the grill. This will glow red  
a few minutes after switching it on and  
is then ready for use.  
Using the fan heating system you can  
bake and roast on different levels at the  
same time.  
Pre-heat the grill for 5 minutes with the  
oven door closed, before placing the  
food on the rack.  
The heated air used by this system is  
of a lower temperature than that used  
with the “Conventional” heating system.  
Defrost G  
No heating is used.  
At this setting air at room temperature  
is circulated by the fan, for gentle de-  
frosting.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Oven - use  
– Light H  
Controls  
There is an oven function selector and  
a temperature selector.  
Turns on the oven light inde-  
pendently.  
– Fan heat D  
For baking or roasting on several le-  
vels at the same time.  
Function selector  
– Conventional A  
Top and bottom heat for baking /  
roasting traditional recipes, for  
soufflés.  
Top heat C  
For browning dishes, finishing  
dishes with a cheese topping.  
– Bottom heat B  
Use this setting towards the end of  
baking, to brown the base of a cake.  
– Defrost G  
For gentle defrosting of deep frozen  
foods.  
– Grill ,  
With this control you select the oven  
function required.  
For grilling fish and cuts such as  
chops, steaks, poultry pieces, and  
kebabs .  
The selector can be turned clockwise  
or anti-clockwise.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Oven - use  
Temperature selector  
The oven can only be turned on  
with the oven function selector,  
when the symbol “@” lights up in  
the timer display.  
Press the “i” button.  
Pre-heating the oven  
This is only necessary in a few cases.  
With Fan Heat D  
– for roast beef and beef fillet.  
With “Conventional” A  
– for baking biscuits and cakes with a  
short cooking time.  
– for baking some doughs.  
– for roasting sirloin.  
Select the appropriate temperature for  
the food to be cooked.  
Turn the temperature selector only  
in a clockwise direction, and back,  
otherwise the control could be dam-  
aged.  
Defrost G: Do not set a tempera-  
ture when seleting “Defrosting”.  
Pre-heating  
Turn the oven selector to the re-  
quired function.  
Set the temperature selector to the  
required temperature.  
When the indicator light above the  
temperature goes out for the first  
time, put the food to be roasted or  
baked into the oven.  
The temperature can be freely selected  
within the given range.  
When the temperature selector is  
switched to the chosen temperature,  
the indicator light above this switch  
comes on.  
When the temperature is reached, the  
heating element switches itself off.  
When the temperature falls below that  
selected, the heating switches on  
again automatically.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Oven - use  
Rack with safety feature  
The non-tip safety feature prevents the  
rack from being pulled right out when it  
only needs to be partially pulled out.  
When using the rack push it into the  
oven so that the safety notches (il-  
lustrated) go to the rear of the oven,  
to meet the notches on the runners.  
The rack can then only be taken right  
out of the oven by raising it upwards  
and then pulling it out.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Timer - use  
Symbols in the display  
The following symbols appear:  
l
– lights up when a short time is set.  
AUTO  
– lights up when a cooking process is  
selected.  
– flashes when the cooking time is  
complete.  
AUTO and @  
– light up as the cooking time pro-  
ceeds.  
The timer can:  
– show the time of day,  
@
– switch the oven off, or on and off  
automatically.  
– lights up when the oven can be  
switched on independently of the  
timer.  
Push buttons  
With the push buttons you can:  
l
– enter a short time as a minute  
minder.  
g
– enter the duration of a cooking  
process.  
)
– enter the end of a cooking process.  
i
– cancel an entered cooking process.  
– /+  
– enter or change times.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Timer - use  
Time of day  
Short time (Minute minder)  
(24 hour display)  
The minute minder can be used to time  
any activity in the kitchen, e.g. boiling  
eggs.  
When the appliance is first con-  
nected to the power supply, or after a  
power cut "0 00" and “AUTO” flash in  
The short time can be entered inde-  
pendently of another entered process.  
the display.  
To set the time of day:  
Enter the short time  
Press the buttons “g” und “)” at  
the same time.  
Press the “l” button.  
Enter the required time in  
“0 00" and ”AUTO" continue to flash.  
hours minutes.  
Enter the time of day with the – /+  
button in hours minutes.  
l” appears in the display field.  
At the end of the short time:  
As soon as the – /+ button is pressed,  
@” lights constantly in the display.  
– an audible tone sounds for approx. 7  
minutes.  
Once the time has been entered it pro-  
ceeds in minute intervals.  
The audible tone can be cancelled at  
any time by pressing the “l” button.  
To alter the time of day:  
The sequence is similar to setting the  
time of day:  
Press buttons “g” and “)” at the  
same time.  
Enter the time of day with the – /+  
button in hours minutes.  
If a cooking process had been entered,  
this will now be cancelled.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Timer - use  
Please note the following:  
Controlling length of cooking  
time automatically  
For baking do not delay the start too  
long. This may affect the rising proper-  
ties of the dough or cake mixture, as it  
will dry out.  
Switch off automatically  
Turn the oven function and tempera-  
ture selectors to the required set-  
tings.  
The end of cooking time  
When the end of cooking time is  
reached  
Press the “g” button.  
“000" appears in the display field.  
Use the + button to enter the  
– the oven heating switches off auto-  
matically.  
required time in hours minutes.  
– an audible tone sounds for approx. 7  
minutes.  
“AUTO” appears in the display field.  
– “AUTO” flashes.  
Delaying the start of cooking time  
The button “i” cancels the audible  
tone and visual symbol.  
Turn the oven function and tempera-  
ture selectors to the required set-  
tings.  
As soon as the “i” button is  
pressed the oven heating element  
comes on again.  
First enter the cooking time:  
Press the “g” button.  
You must switch off the oven.  
“0 00" appears in the display.  
Turn the oven function and tempera-  
ture selectors to "0".  
Use the + button to enter the  
required time in hoursminutes.  
“AUTO” appears in the display.  
Now postpone the end of cooking  
time:  
Press the “)” button.  
The time of day plus the cooking time  
entered appear in the display.  
Use the + button to postpone the  
end of cooking time.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Timer - use  
To check and change an en-  
tered time  
Cancelling an automatic  
process.  
It is possible to check times entered for  
a cooking process, or with the minute  
minder at any time.  
Press the “i” button.  
Please note:  
As soon as the cooking process is fin-  
ished the oven heating element and the  
light come on again.  
Checking  
Press the button of the time which is  
to be checked.  
Changing the audible tone  
There is a choice of 3 audible tones.  
g
The cooking time entered, or the  
amount of time left to run in a pro-  
gramme in progress is shown.  
- Press the “–” button.  
Each time “–” is pressed, a different  
tone is heard.  
)
The end of the cooking process  
appears.  
l
The short time remaining is shown.  
Altering  
Press the button of the time which is  
to be altered.  
Use the – /+ button to enter the  
required time.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Baking in the oven  
The following settings are recom-  
mended for baking:  
Baking with the  
“Conventional A” setting  
The following baking tins give an  
evenly browned result:  
– Fan Heat D  
– Conventional A  
Dark metal or enamel tins with a matt  
finish are preferable. Heat resistant  
glass or thermoplastic trays dishes can  
be used.  
Baking with the “Fan Heat D”  
setting  
Most types of heat-resistant tins or  
dishes are suitable, including thin-  
walled and bright, non-reflective metal  
moulds.  
Avoid thin-walled and bright, non-  
reflective metal moulds. These will  
give uneven browning results.  
Several levels can be used at the same  
time for baking. The recommended po-  
sitions are:  
Pre-heat the oven only for:  
– cakes / biscuits with a very short bak-  
ing time,  
1 tray = 1st runner from the bottom  
– victoria sponge and similar mixtures.  
2 trays = 1st and 3rd runners from the  
bottom  
Select runner height, according to  
height of the item:  
3 trays = 1st, 2nd and 5th runners from  
the bottom  
– 1 or 2 for deep cakes  
– 2 or 3 for biscuits and shallow cakes  
When baking moist biscuits, cakes  
or bread, do not bake on more than  
two levels.  
With the “Fan Heat D” setting lower  
baking temperatures are needed than  
with the “Conventional A” setting. See  
the baking charts.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Baking in the oven  
General notes  
The Baking Chart gives sugges-  
tions for temperature, runner height  
and timing.  
For even browning -  
– in general select the middle tem-  
perature.  
Increasing the temperature and reduc-  
ing the time can have an adverse ef-  
fect on even browning.  
– Select the runner height according  
to the recipe and the setting chosen.  
Place oblong tins in the oven as shown  
in the illustration.  
– Just before the end of baking time  
test to see if the cake is done.  
Deep-frozen products such as pizzas  
should be placed on baking paper on  
the rack.  
Insert a metal or wooden skewer into  
the centre.  
If it comes out clean, without dough or  
crumbs sticking to it, the cake is ready.  
Use the deeper roasting tray for moist  
fruit cakes and multi-layer cakes, to  
minimize splashes in the oven.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Baking  
Baking chart  
Fan Heat D  
Temperature  
in °C  
rec. runner  
from bottom  
Time  
in mins.  
Creamed mixture  
Sand cake  
Dried fruit cake  
Nut cake (tray)1)  
Nut cake (tin)  
150 – 170  
150 – 170  
150 – 170  
150 – 170  
150 – 170  
150 – 170  
150 – 170  
150 – 170  
1
50 – 60  
70 – 80  
20 – 25  
60 – 70  
35 – 45  
45 – 55  
25 – 30  
20 – 25  
1
1
1
Fresh fruit cake (tray)  
Fresh fruit cake (tin)  
Flan base 1)  
1
1
1
Small cakes 1)  
1, 2, 5  
Whisked mixture  
Tart 1)  
160 – 180  
160 – 180  
160 – 180  
1
1
1
25 – 35  
20 – 25  
20 – 25  
Flan base 1)  
Swiss roll 1)  
Rubbed-in mixture  
Tart / flan base  
Nut ring  
150 – 170  
150 – 170  
150 – 170  
150 – 170  
150 – 170  
150 – 170  
190 – 210  
1
20 – 25  
40 – 50  
40 – 50  
15 – 25  
75 – 85  
55 – 75  
25 – 35  
1
Crumble cake  
Small cakes 1)  
Cheesecake  
1
1, 2, 5  
1
1
1
Apple pie 1)  
Savoury pastry 2)  
Yeast mixtures  
Crumble cake  
Fresh fruit cake (tray)  
Stollen  
150 – 170  
160 – 180  
150 – 170  
160 – 180  
190 – 210  
170 – 190  
150 – 170  
1
1
35 – 45  
45 – 55  
45 – 65  
40 – 50  
60 – 70  
40 – 50  
35 – 45  
1
White bread  
1
Wholemeal bread 1)  
Pizza (tray) 1)  
Apple turnovers  
1
1
1, 3  
Choux pastry 1)  
Eclairs  
160 – 180  
170 – 190  
1, 3  
1, 3  
30 – 40  
20 – 25  
Flaky pastry 1)  
Meringues 1)  
Macaroons  
120 – 140  
1, 2, 5  
30 – 50  
The times given are calculated on the basis of an oven which has not been pre-heated.  
With a pre-heated oven shorten times by approx. 10 minutes.  
1) Pre-heat oven with "Conventional A“ heat.  
2) Pre-heat oven with "Fan Heat D“ and "Conventional A“ heat.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Baking in the oven  
Conventional heat A  
Temperature  
in °C  
Recommended runner  
height from bottom  
Time  
in mins.  
160 – 180  
160 – 180  
180 – 200  
160 – 180  
180 – 200  
160 – 180  
180 – 200  
180 – 200  
1
50 – 60  
70 – 80  
15 – 20  
60 – 70  
35 – 45  
45 – 55  
15 – 20  
12 – 15  
1
1 oder 2  
1
1 oder 2  
1
1 oder 2  
2
180 – 200  
180 – 200  
190 – 210  
1
1
20 – 30  
15 – 20  
15 – 20  
1 oder 2  
180 – 200  
180 – 200  
180 – 200  
180 – 200  
180 – 200  
180 – 200  
230 – 250  
1 oder 2  
15 – 20  
40 – 50  
40 – 50  
10 – 15  
75 – 85  
55 – 75  
25 – 35  
2
1 oder 2  
2
1
1
1 oder 2  
180200  
180200  
170190  
190210  
210230  
190210  
170190  
1 oder 2  
1 oder 2  
1 oder 2  
1 oder 2  
1 oder 2  
1 oder 2  
1 oder 2  
35 – 45  
45 – 55  
45 – 65  
40 – 50  
60 – 70  
40 – 50  
20 – 25  
190 – 210  
200 – 220  
1 oder 2  
1 oder 2  
25 – 35  
15 – 20  
130 – 150  
2
30 – 50  
Data given are for guidelines only. Values obtained from a machine designed for the Ger-  
man market.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Roasting in the oven  
We recommend the following settings  
for roasting in the oven:  
Place the covered pot on the rack.  
The meat should be put into a cold  
oven.  
– Fan Heat D  
– Conventional A  
Exception: Pre-heat the oven to the tem-  
perature recommended in the recipe  
when cooking roast beef or beef fillet.  
Fan Heat D:  
Make sure the grease filter is fitted  
in front of the fan in the back of the  
oven interior before starting.  
Use shelf position 1 for roasting.  
Exception: Use shelf position 2 when  
roasting poultry weighing up to 1 kg, a  
cut of meat, or fish.  
The “Fan Heat D” system uses an ap-  
proximately 40°C lower roasting tem-  
perature than the “Conventional” heat-  
ing system.  
We recommend roasting in a covered  
pot L:  
– This ensures that sufficient stock re-  
mains for making gravy.  
The bigger the quantity to be roasted,  
the lower the temperature.  
– The oven stays cleaner, too.  
When roasting more than 3 kg select a  
temperature about 10°C lower than the  
one given in the “Roasting” chart.  
The roasting process will take a bit  
longer, but the meat will be cooked  
evenly and the exterior will become  
crisp.  
For roasting directly on the rack K  
the temperature needs to be about  
20°C lower than for roasting in a  
covered pot L.  
Roasting pots with a lid, made from  
earthenware, cast iron, ovenproof  
china or glass, and roasting foil are suit-  
able.  
The Roasting time will depend on the  
type of meat, the size and thickness of  
the cut.  
Make sure that the pot and lid have  
heat-resistant handles.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Roasting in the oven  
Calculating roasting time:  
Useful hints  
The traditional British method is to  
allow 15 to 20 minutes to the lb, accord-  
ing to type of meat, plus approx. 20  
minutes, adjusting length of time as  
roasting proceeds, to obtain the re-  
quired result.  
Roasting in a covered pot L  
Season the meat and place in the pot.  
Add some knobs of butter or margarine  
or a little oil or cooking fat. Add about  
1/8 litre of water when roasting a big  
lean joint of meat (2-3 kg) or roasting  
poultry with a high fat content.  
Alternatively, multiply  
the height of the joint by  
the time per cm for the type of meat,  
(see the roasting chart).  
Roasting on the rack K  
Place a little water in the tray. Add a  
little fat or oil to very lean meat or place  
a few strips of bacon on the top. Do not  
add too much liquid to the tray during  
cooking as this will hinder the browning  
process.  
Type of meat  
time per cm  
height of meat  
Beef / Venison  
Pork / Veal / Lamb  
Roast beef / Fillet  
15-18 mins.  
12-15 mins.  
8-10 mins.  
Example:  
Beef roast, 8 cm high  
8 x 15 mins. per cm = 120 mins. roast-  
ing time  
Roasting poultry  
For a crisp finish, baste the poultry ten  
minutes before the end of cooking time  
with slightly salted water.  
Please note:  
Do not select a roasting temperature  
which is higher than that recom-  
mended.The meat will become brown,  
but will not be cooked properly.  
Roasting deep frozen meat  
Deep frozen meat should be defrosted  
beforehand.  
Browning only occurs towards the end  
of the roasting time. Remove the lid  
about halfway through the roasting time  
if a more intensive browning effect is  
desired.  
After the roasting process is finished  
take the roast out of the oven, wrap in  
aluminium foil and leave to stand for  
about 10 minutes.  
This helps retain juices when the meat  
is carved.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Oven roasting chart  
Oven roasting chart  
Fan Heat D1)  
Conventional  
A
Rec.  
runner  
from  
Temp. °C  
Time  
in mins  
Temp. °C  
Time  
in mins.  
in a pot  
in a pot  
bottom  
L2)  
L2)  
Rib of beef  
apprx. 1 kg  
1
180-200  
100-120  
220-240  
100-120  
Sirloin,  
Steak2)  
apprx. 1 kg  
apprx. 1 kg  
apprx. 1 kg  
apprx. 1 kg  
apprx. 1 kg  
apprx. 1 kg  
apprx. 1.5 kg  
0.8-1 kg  
1 4)  
1
190-210  
180-200  
170-190  
170-190  
170-190  
170-190  
170-190  
170-190  
170-190  
160-180  
160-180  
35-45  
90-120  
100-120  
100-120  
50-60  
240-260  
220-240  
210-230  
200-220  
200-220  
210-230  
210-230  
200-220  
200-220  
190-210  
200-220  
35-45  
90-120  
100-120  
110-130  
50-60  
Venison, game  
Leg of pork  
Rolled pork  
Meat loaf  
Veal  
1
1
1
1
100-120  
90-120  
50-60  
100-120  
90-120  
50-60  
Shoulder of lamb  
Poultry  
1
1 4)  
Poultry  
apprx. 2 kg  
apprx. 4 kg  
apprx. 1.5 kg  
1
120-150  
150-180  
35-55  
120-150  
150-180  
35-55  
Poultry  
1
1 4)  
Whole fish  
Unless otherwise stated, the times given are for an oven which has not been pre-heated.  
1) Fit the grease filter in place when using “Fan Heat D”.  
2) When roasting on the rack K, set the temperature 20°C lower than given.  
3) Pre-heat the oven when using “Fan Heat D” and “Conventional: A”.  
4) 2nd runner from the bottom when using the “Conventional A” setting.  
The information given in this chart is intended only as a guide.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Defrosting in the oven  
Turn the oven function selector to  
"Defrost G".  
Do not select any temperature set-  
ting.  
– Where possible remove the packa-  
ging and put the food to be de-  
frosted on a baking tray or into a  
dish.  
– All meat and poultry should be fully  
defrosted before cooking. Do not  
use the liquids from defrosting.  
– When defrosting poultry put it on the  
rack, one level higher than a tray put  
in to catch the defrosted liquid, so  
that the meat is not lying in this liquid.  
It is particularly important to ob-  
serve food hygiene rules when de-  
frosting poultry. Do not use the liq-  
uid from the defrosted poultry. Pour  
it away, and wash the tray, the sink  
and your hands.  
N.B. Put the tray back in the oven if  
roasting on the rack.  
– Fish does not need to be fully de-  
frosted before cooking. Defrost so  
that the surface is sufficiently soft to  
take herbs and seasoning.  
Do not refreeze food once it has  
thawed.  
The time needed for defrosting de-  
pends on the type and weight of the  
food, and at what temperature it was  
deep frozen.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Casseroles  
Cassseroles  
Please note:  
The following oven settings are recom-  
mended:  
Cover dishes which are to be cooked  
in their own juice and/or steam, eg du-  
chesse potatoes or vegetables, so that  
they do not dry out. If there is no lid use  
aluminium foil or damp cooking parch-  
ment.  
– Fan Heat D  
– Conventional A  
The following dishes are suitable for  
this type of slower cooking:  
Cook without a lid when a crusty fin-  
ish or topping is required, eg for meat  
or au gratin dishes.  
covered pots made of ovenproof glass  
and china, and earthenware pots,  
which could also be used as serving  
dishes. They should have heat-resis-  
tant handles and knobs.  
Useful hint  
One dish can be placed on top of the  
other. Invert the lid of the bottom dish.  
Put dishes to be browned at the top.  
Put the rack in at the 1st runner  
height from the bottom, and place  
the prepared casserole with the food  
for braising or stewing on this.  
Poaching  
Select the oven setting and the tem-  
Fish or fruit can be poached in the  
oven in a covered dish.  
perature.  
Fan Heat D . . . . . . . . . . . . . 170-190°C  
Conventional A . . . . . . . . . . 190-210°C  
Bottling  
Bottling should only be undertaken by  
an experienced cook who has received  
proper training in this method of pres-  
erving fruit and vegetables, and under-  
stands the implications of the chemical  
reactions involved.  
Cooking times  
Consult your cook book.  
Instructions for bottling in this oven are  
available from the Miele Home Econo-  
mist.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Grilling in the oven  
Grilling on the rack  
Pre-heat the grill for approx. 5  
minutes with the oven door shut.  
Grilling with the oven door shut  
saves energy and minimizes cook-  
ing smells.  
Preparing food for grilling  
Clean, wipe and season. Do not salt  
slices of meat beforehand as this de-  
tracts from the taste.  
Add a little oil if necessary. Other fats  
quickly become black or cause the  
food to smoke. A little butter can be  
added to chicken if desired.  
Assemble the grill pan and rack as  
shown.  
Place the food on the rack.  
Turn the oven function selector to  
the“Grill ,setting.  
Clean flat fish and slices of fish in the  
normal way. To enhance the taste add  
a little salt or squeeze a little lemon  
juice over the fish.  
Set the temperature:  
Food to be grilled  
temperature  
275°C  
Thin cuts  
such as chops, steak  
Thicker cuts  
such as chicken, kebabs  
240°C  
To grill thicker pieces of food more  
gradually after an initial high tempera-  
ture, continue grilling at a lower tem-  
perature setting to allow the food to  
cook through to the centre.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Grilling in the oven  
Insert the grill pan at the appropriate  
level for the height of the food to be  
grilled:  
Basting brush  
thin cuts = level 3, 4 or 5  
thicker cuts = level 1 or 2  
Grilling time  
Flat pieces of fish and meat usually  
need about 5-6 minutes a side depend-  
ing on their texture. Thicker pieces  
need longer. With rolled meat allow ap-  
prox. 10 minutes per cm diameter.  
A basting brush with an angled handle  
for convenient basting under the grill is  
available from the Miele Spare Parts  
Department.  
Please note:  
It is best to grill food of a similar thick-  
ness at the same time so that the grill-  
ing time for each item does not vary  
too greatly.  
Most items should be turned half way  
through cooking.  
Useful grilling hints  
One way of finding out how far through  
a piece of meat has been cooked is to  
press down on it with a spoon.  
– If there is very little resistance to the  
pressure of the spoon, it is still red  
on the inside (“rare”).  
– If there is some resistance, the in-  
side will be pink (“medium”).  
– If there is great resistance, it is  
throughly cooked through (“well  
done”).  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Grilling  
Grill chart  
Pre-heat the grill for about 5 minutes with the door shut before using.  
Food to be grilled  
Runner  
from bottom  
Temperature  
in °C  
grilling  
time (mins) *  
Flat items of food  
Beef steaks  
Kebabs  
3 or 4  
3 or 4  
3 or 4  
3 or 4  
3 or 4  
3 or 4  
3 or 4  
3 or 4  
3 or 4  
3 or 5  
3 or 4  
3 or 4  
3 or 4  
2 or 3  
290  
260  
290  
275  
210  
240  
275  
250  
275  
240  
240  
240  
240  
230  
3-5  
8-12  
10-12  
8-12  
10-15  
8-10  
12-18  
10-15  
16-20  
3-6  
Escalope  
Liver slices  
Burgers  
Sausages  
Chops  
Fish fillet  
Small trout/mackerel  
Toast  
Open toasted sandwich  
Tomatoes  
4-6  
6-10  
6-10  
6-8  
Bananas  
Peach halves  
Thicker grilling cuts  
Chicken pieces  
(approx. 1 kg)  
1 or 2  
240  
50-60  
Piece of pork, Ø 7 cm  
(approx. 1 kg)  
1
1
240  
260  
70-80  
20-25  
Mixed grill  
* Turn half way through the grilling time.  
All times given are approximate and will vary according to personal taste.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Ceramic hob surface  
In general you can use the same clean-  
ing agents for the ceramic hob surface  
as you would for ordinary glass sur-  
faces.  
Never use scouring agents or pads,  
or strong cleaners such as oven  
sprays or stain removers, as these  
could harm the surface.  
Clean after each use  
Any minor spills which have not  
dried on can be wiped off with a  
damp cloth or sponge. If washing up  
liquid or a similar cleaner is used, light  
blue staining might occur.  
For stubborn spillages use a shielded  
razor blade scraper.  
Then wipe with a damp cloth or  
sponge.  
These stains can be removed with a  
proprietary ceramic hob cleaning  
agent, although it may take several ap-  
plications.  
Removing marks  
Light marks with a metallic sheen  
(alluminium desposits) on the hob sur-  
face can be removed once the hob has  
cooled down by using a suitable pro-  
prietary cleaner.  
Lime deposits (caused for example by  
water boiling over, or damp pan bases)  
can be removed with vinegar or a pro-  
prietary hob cleaner.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clean and care  
Some cleaners incorporate a silicone  
ingredient which acts as a protective  
film on the hob. It makes the hob sur-  
face smoother and prevents water and  
soiling adhering to the surface.  
Removal of sugar, or syrups, plastic  
or aluminium foil  
Do not let the hob cool down.  
Scrape the sugar or other residue  
thoroughly from the hob with a  
shielded razor blade scraper.  
However, cooking at high temperatures  
reduces the effect and the cleaner  
needs to be reapplied for renewed ef-  
fect.  
When the hob is cool, clean with a pro-  
prietary cleaner.  
By always cleaning the ceramic sur-  
face with one of these special cleaners  
you will help to avoid the damage  
caused by sugar and syrups and alumi-  
nium foil deposits.  
Suitable cleaners  
There are proprietary cleaners on the  
market for cleaning ceramic hobs. Fol-  
low the manufacturer’s instructions.  
Do not apply to the hob when still  
hot.  
After applying the cleaner let it dry and  
then rub it off using paper kitchen to-  
wels.  
Remove every trace of cleaner from  
the hob with a damp cloth. It could  
have an adverse effect on the hob  
when heated up.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Hotplate surround.  
Enclosed hotplates  
This can be cleaned with a suitable  
stainless steel cleaner.  
Hotplates  
Wipe off any spilt food with a damp  
cloth after the hotplates have cooled  
off. Use a plastic scouring pad if  
necessary for stubborn spills.  
Do not use any cleaning agent with  
a scouring effect.  
Moisture or dirt must not penetrate  
the hotplate interior.  
Hob trough  
Do not use any scouring agents or  
pads as this could scratch.  
The hotplates can be scoured, but not  
the hotplate surround.  
Clean the hob with a hot water and  
detergent solution.  
Remove any spills of food or water  
containing salt as soon as possible,  
as these could cause corrosion.  
Where spills have dried on, soak for a  
short time to make cleaning easier.  
After cleaning switch on the damp  
hotplates for a short time to dry out,  
to avoid corrosion.  
Occasional treatment with a thin film  
of oil, or special cleaner for solid hot-  
plates is recommended, (eg "Elektro-  
puzzi" available to order from the Spare  
Parts dept).  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Appliance front and control  
panel  
Use a mild cleaning agent or a dash of  
washing up liquid in hot water. Wipe  
dry with a soft cloth.  
Accessories  
Runners  
Wash in hot water with washing up liq-  
uid, or clean with a stainless steel  
cleaner.  
Glass front  
Baking tray, roasting/grill pan, rack:  
Do not use a scouring agent, as this  
would scratch the glass front.  
wash and dry after each use.  
Remove stubborn residues that do not  
wash away  
For ovens with a white finish we recom-  
mend after each use wiping:  
– the oven door handle and  
– the control panel  
with a damp cloth and some washing  
up liquid. This will avoid spillages  
being burnt on and becoming im-  
possible to remove.  
– from stainless steel:  
with a stainess steel cleaner.  
– from enamel:  
Soften residues by soaking with hot  
water, then brushing with a soft nylon  
brush or sponge.  
Roasting filter  
Stainless steel front  
Clean in washing up liquid and hot  
water, or in the dishwasher.  
Never use cleaners containing  
sand, soda or scouring agents,  
These will leave scratches.  
Use a non-scouring stainless steel  
cleaner. Apply with an even pressure.  
Wipe over with a damp cloth and rub  
dry with a soft cloth.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Oven interior  
Different surfaces of the oven interior  
are coated with either  
b“Clean-Enamel”, or  
c“Catalytic” enamel.  
Important: Remove any soiling from  
the “Clean-Enamel” areas before  
carrying out the extra cleaning pro-  
cess for “Catalytic” enamel de-  
scribed on the next page.  
Never use hard brushes, wire wool  
or scourers, scouring pads, hard  
sponges or other scouring agents  
on the enamel coatings.  
These scratch and damage enamel.  
b“Clean-Enamel”  
This is a specially hardened enamel  
with an extremely smooth surface.  
Most baking and roasting residues can  
be easily removed using a sponge  
cloth, washing up liquid and hot water.  
If something bakes on harder, it can be  
loosened with a shielded razor blade  
scraper. It is easier to remove splashes  
of fruit or cake mixture from the oven  
and racks while they are still warm.  
The oven cavity and door interior are  
finished in “Clean-Enamel”. The rear  
panel which protects the fan is more  
subject to oil and fat splashes, and has  
a catalytic coating.  
Fruit juice may cause lasting discolour-  
ation.  
With some models, side panels with  
catalytic coating are fitted, and the re-  
movable guard plate above the grill  
has a catalytic coating. With this ar-  
rangement most of the interior “Clean-  
Enamel” is protected, except for the  
floor and door, which should be  
cleaned after each use.  
Dull patches may remain permanently  
in the oven tray after roasting or grilling.  
If an oven spray is used on the  
Clean-Enamel, follow the manufac-  
turer’s instructions carefully.  
Important: Oven spray must not  
come into contact with “Catalytic”  
enamel.  
The oven should be cleaned regu-  
larly, preferably after each use.  
If left too long cleaning becomes un-  
necessarily difficult and in extreme  
cases impossible.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
c“Catalytic” Enamel  
Cleaning the catalytic enamel ma-  
nually  
Because circulating air in the oven de-  
posits oil and fat splashes predomi-  
nantly on the rear wall of the oven this  
is coated in catalytic enamel.  
Where cooking is carried out at lower  
temperatures splashes and oil and  
grease can collect on the catalytic coat-  
ing. This slight soiling can be cleaned  
manually as follows:  
With some models, side panels with  
catalytic coating are also fitted, and the  
removable guard plate above the grill  
has a catalytic coating.  
Let the oven cool down and remove the  
runners. If the roof guard needs to be  
removed, see below. Wipe down the  
surfaces using a cloth, soft sponge or  
soft nylon brush with warm water to  
which a little washing up liquid has  
been added.  
When this catalytic enamel is heated to  
temperatures above 200°C, oil and  
grease deposits are removed, except  
for deposits of spices and syrups. The  
higher the temperature the more effec-  
tive the process.  
Do not use oven spray, or abrasive  
cleaning agents.  
Do not wash these panels in the  
dishwasher. Any mechanical hand-  
ling would damage the catalytic en-  
amel.  
To take further advantage of the cata-  
lytic properties for cleaning, the “Extra  
cleaning process” can be used, (see  
next page). For slight soils the oven  
can be cleaned manually. Do not wait  
too long between cleaning sessions as  
further baking and roasting will cause  
oil and grease deposits to burn on  
even harder.  
Clean the oven floor (clean enamel)  
after each use.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Cleaning catalytic enamel using the  
“Extra cleaning process”  
Should the catalytic coating on the  
back panel or any other catalytic pa-  
nels fitted become ineffective  
through improper use or heavy soil-  
ing, for example, a replacement can  
be obtained from your Miele dealer  
or Miele Spare Parts dept.  
Before carrying out the extra cleaning  
process take out the rack and side pa-  
nels, and remove any soiling from the  
“Clean-Enamel” areas.  
To operate the extra cleaning process:  
Turn the oven function selector to  
“Fan Heat D”.  
Turn the temperature selector to the  
highest setting.  
Let the oven operate for about one  
hour. The length of time will depend on  
the degree of soiling. It is a good idea  
to set the finish time for the process  
using the timer. This way you will not  
forget to switch the oven off at the end.  
Wipe over all visible surfaces which are  
not protected by catalytic liners, espe-  
cially the oven floor.  
Every time the oven is used at high  
temperatures any remaining soiling  
will gradually disappear.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
For ease of cleaning the oven door can  
be taken off, the runners, side panels  
and back panel removed and the top  
grill element lowered.  
Please note : the oven door is quite  
heavy. It should be gripped firmly at  
the sides when being removed or re-  
fitted.  
To remove the oven door:  
Open the door fully.  
Lift up the door until the hinges  
disengage. Remove door.  
To re-fit the oven door:  
Hold the door as shown above and  
carefully put the locked hinges into  
the guide holes until they engage.  
Open the door fully.  
Flap down the locking clamps on  
each door hinge. This locks the  
hinges.  
Still supporting the door, flip the lock-  
ing clamps up.  
It is essential that the locking  
clamps are flipped up when the  
door is refitted after cleaning. Other-  
wise the door could come loose on  
its hinges.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
To remove the runners  
To remove the catalytic side panels  
Select the “Light H” setting.  
Select the “Light H” setting.  
The oven heater elements must be  
switched off, to avoid the danger of  
burning.  
The oven heater elements must be  
switched off, to avoid the danger of  
burning.  
Take the runners out of the oven.  
Gently lift and pull out the catalytic  
side panels.  
Reassemble in the reverse order, care-  
fully ensuring all parts are correctly in  
place.  
Pull on the fixing knob to release it.  
Take the runners out of the oven.  
Reassemble in the reverse order, care-  
fully ensuring all parts are correctly in  
place.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
When reassembling the catalytic side  
panels, ensure they sit correctly.  
Ease the back lug into the opening  
in the rear wall panel.  
Put the runners back into place.  
Lift the front locating hole on to the  
guide pin behind the collar.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
To remove the back panel  
To lower the upper heating element:  
Select the “Light H” setting.  
The oven heater elements must be  
switched off, to avoid the danger of  
burning.  
Wait until the grill element has cooled  
down enough to touch. Otherwise you  
could be burnt.  
Take out the runners.  
Loosen the screws in the back panel  
and take it out.  
The oven must not be used without  
the back panel fitted. This could  
lead to injuries.  
Reassemble in the reverse order, care-  
fully ensuring all parts are correctly in  
place.  
Pull (and turn if necessary) on the fix-  
ing knob on the grill element to re-  
lease it.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
If the guard plate is dirty it can also be  
removed for cleaning:  
Hold the guard plate firmly and un-  
screw the knurled knob.  
Take out the guard plate.  
Gently lower the grill element.  
Reassemble in the reverse order,  
carefully ensuring all parts are cor-  
rectly in place.  
Do not use force to lower it, as this  
could cause damage.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Correcting minor faults  
. . . the heating works, but not the  
oven lighting  
Installation, maintenance and re-  
pairs to the electrical components  
of this appliance should only be car-  
ried out by a fully competent per-  
son.  
The bulb needs changing:  
Disconnect the appliance from the  
electricity supply:  
Switch off at the isolator or the mains  
fuse box.  
Unauthorised repairs can be dan-  
gereous.  
Remove the runners.  
Some minor problems however can be  
dealt with as follows:  
Lift the lamp cover from its retainers.  
What to do if . . .  
. . . The hob cooking zones / hot-  
plates do not warm up after being  
switched on  
Check whether,  
the house mains fuse has shorted.  
Call an electrician or the Service  
dept.  
. . . The oven does not heat up?  
Check whether,  
the selector switch is set to the func-  
tion required, and the temperature  
control is set at the correct tempera-  
ture.  
Change the bulb:  
230-240°V, 25 W, E 14, heat  
resistant to 300°C, pear shape.  
“AUTO” is flashing in the timer dis-  
play field.  
To switch on the oven independently  
of the timer, @” should show in  
the display. Press the “i” button.  
Press the lamp cover back in its  
retainers and put the runners back.  
the main fuse has blown. Contact a  
qualified electrician or the Miele Ser-  
vice Department.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Correcting minor faults  
. . . no noise is heard when the oven  
door is opened during operation  
. . . the cake or biscuits are unevenly  
browned  
This is not a fault.  
There will always be a slight uneven-  
ness. Product information sheets give a  
percentage results for standard brown-  
ing tests. These refer to results for one  
tray.  
If the door is opened during operation,  
the door contact switch causes the  
oven heating, and the fan if on “Fan  
Heat D” setting, to be switched off.  
If the item being baked is browning  
very unevenly, check:  
. . . a noise is heard after a baking,  
roasting or grilling process  
– Baking with the “Fan Heat D” set-  
This is not a fault.  
ting:  
The cooling fan continues to run for a  
short time. When the temperature has  
fallen sufficiently the fan switches off  
automatically.  
whether the temperature was set too  
high,  
whether the roasting filter was in  
place.  
. . . the cakes and biscuits are not  
cooked after following the times  
given in the chart  
– Baking with “Conventional A” heat-  
ing.  
Check whether,  
check the colour and composition of  
the baking tins being used. Light col-  
oured, shiny, or thin walled tins are  
less suitable.  
the correct temperature was set.  
there has been a change to the  
recipe. The addition of more liquid or  
more eggs makes a moister mix  
which would need longer to cook.  
. . . spots like rust appear on the inte-  
rior walls  
the roasting filter had been left in  
place in front of the fan when cook-  
ing with “Fan Heat D”. In this case  
baking times might be lengthened  
by 10 to 15 minutes.  
When roasting on the rack, the circulat-  
ing air sometimes picks up spices,  
which are then deposited on the oven  
interior walls. Such residues are not  
removed by catalytic cleaning, they are  
best removed while fresh with a mild  
washing up liquid solution and a soft  
brush.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Correcting minor faults  
. . . There has been a power failure,  
and instead of the time of day "0 00"  
and "AUTO" flash in the display  
All pre-set times are deleted as a result  
of the power failure.  
Enter the time of day again, and any  
other pre-set data.  
. . . “0 00" appears when the audible  
tone is switched off  
This is not a fault.  
The time of day will shortly reappear in  
the display field.  
. . . “AUTO” flashed in the timer dis-  
play  
This might signal a data entry mistake,  
– for example entering conflicting  
times.  
– if the time of day is changed while a  
start and finish time have been pre-  
set.  
– when the acoustic tone is switched  
off by pressing the “g” and “)”  
buttons.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
After sales service  
In the event of faults which you cannot  
easily remedy yourself, please contact:  
– your Miele Dealer  
or  
– the nearest Miele Service Depart-  
ment, (see address on the back  
page).  
When contacting the Service dept,  
please quote the Model and Serial num-  
ber of your appliance, both of which  
are shown on the data plate, visible  
below the control panel, with the oven  
door open.  
If you have an oven and hob combina-  
tion also give the number of your hob.  
Space for hob data plate  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Extra accessories  
These are available at extra cost from  
your Dealer or the Miele Domestic  
Sales dept.  
Telescopic carriage  
– Handle  
The telescopic carriage with 5 levels of  
runners can be drawn right out of the  
oven.  
This gives a good overview of all the  
cooking in progress.  
To take the baking trays or the roast-  
ing / grill pan out of the oven, or to put  
them into it.  
– Anti-splash tray  
to be placed in the grill pan when  
grilling  
The juices from the food being grilled  
are gathered under the anti-splash tray,  
rather than being dried out, and they  
can then be used in sauces etc.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Electrical connection U.K.  
Possible combinations  
All electrical work should be under-  
taken by a competent person in  
strict accordance with national and  
local safety regulations.  
The version of the built-in oven with  
hob controls may only be combined  
with one of the hobs listed below, (not  
all units are available in every country):  
The voltage and rated load are given  
on the data plate, visible when the  
oven door is open. Please ensure that  
these match the household mains sup-  
ply. Please quote these data, and the  
model and serial number when contact-  
ing the Miele Service dept.  
KM 210  
KM 212  
KM 200  
KM 201  
KM 202  
Connection of this appliance should be  
made either via a fused connection unit  
(rated load under 3000 W), or via a suit-  
able isolator (rated load over 3000 W),  
which complies with national and local  
regulations, and which is accessible  
after the appliance has been built in.  
Important  
The appliance is supplied with a 3-core  
cable for connection to a 230-240 volt  
50 Hz supply.  
The wires are coloured in accordance  
with the following code:  
Green/yellow = earth  
Blue = neutral  
Brown  
= live  
WARNING  
THIS APPLIANCE MUST BE  
EARTHED.  
In other countries check these details  
with your supplier.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Electrical connection \}  
\
}
The voltage and rated load are given  
on the data plate, visible when the  
oven door is open. Please ensure that  
these match the household mains sup-  
ply.  
Data relating to electrical connection  
will be found on the data plate, visible  
when the oven door is open. Make sure  
that these figures comply with the main  
voltage. Connection should be made  
via a suitable isolator which complies  
with national and local regulations.  
Underbench oven  
The appliance is supplied with a 3-core  
cable for connection to a 230-240 volt  
50 Hz supply.  
Underbench oven  
The appliance is supplied with a 3-core  
cable for connection to a 230-240 volt  
50 Hz supply.  
The fuse rating is 32 amps for the "E"-  
model with hob.  
The fuse rating is 32 amps for the "E"-  
model with hob.  
Wall oven  
The appliance is supplied with a 3-core  
cable for connection to a 230-240 volt  
50 Hz supply.  
Wall oven  
The appliance is supplied with a 3-core  
cable for connection to a 230-240 volt  
50 Hz supply.  
The fuse rating is 13 amps for the "B"-  
model.  
The fuse rating is 16 amps for the "B"-  
model.  
The wires are coloured in accordance  
with the following code:  
The wires are coloured in accordance  
with the following code:  
Green/yellow = earth  
Blue = neutral  
Green/yellow = earth  
Blue = neutral  
Brown  
= live  
Brown  
= live  
WARNING  
THIS APPLIANCE MUST BE  
EARTHED.  
WARNING  
THIS APPLIANCE MUST BE  
EARTHED.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Electrical connection @ä  
Electrical connection of the  
@
Underbench oven  
appliance should be undertaken by  
a qualified electrician in strict ac-  
cordance with national and local  
safety regulations.  
The underbench oven is suitable for  
connection to an a.c. single phase  
240 V, 50 Hz electricity supply.  
Caution:  
The fuse rating is 32 amps with hob.  
In order to avoid a hazard this ap-  
pliance must be installed according  
to these instructions for installations.  
Possible combination:  
The underbench oven can only be com-  
bined with the ceramic hob KM 212.  
Fusing arrangements must be accord-  
ing to national and local standards.  
Connection should be made via a suit-  
able isolator switch which complies  
with national and local regulations. It  
should be easily accessible for servic-  
ing work.  
Wall oven  
The wall oven is suitable for connection  
to an a.c. single phase 240 V, 50 Hz  
electricity supply.  
The fuse rating is 16 A.  
The data plate gives the necessary  
connection rating, which must be ac-  
cording to national and local standards.  
ä
Underbench oven  
When contacting the Service Depart-  
ment, please quote the voltage, model  
and serial numbers given on the data  
plate.  
The underbench oven is suitable for  
connection to an a.c. single phase 230  
V, 50 Hz electricity supply.  
The fuse rating is 32 amps for H 212 E  
with hob.  
WARNING  
THIS APPLIANCE MUST BE  
EARTHED.  
Possible combination:  
The underbench oven can only be com-  
bined with the ceramic hob KM 212.  
Wall oven  
Test certificates awarded. . . . . . . . . . .  
. . . . . . . . Electrical Safety, C-Tick Mark  
The wall oven is suitable for connection  
to an a.c. single phase 230 V, 50 Hz  
electricity supply.  
Electrically suppressed acc. to . . . . . .  
. . . . . . . . . . . . . . . . . . . . . AS/NZS 1044  
The fuse rating is 16 A.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation instructions  
Installation  
Ceramic hob  
These hobs are classified in Germany  
as “Y” class for heat protection. They  
must be positioned so that there is ade-  
quate ventilation. There may be a wall  
at the rear and wall or tall units at one  
side. On the other side, however, no  
unit or divider must stand higher than  
the hob.  
KM 210, KM 212  
*Space for fixing and cable  
Prepare the worktop cut-out as  
shown in the illustrations below.  
2
1
3
Because of heat given out, there  
must be a minimum distance as fol-  
lows:  
4
5
– 40 mm between the hob cut-out  
and adjacent furniture, e. g. tall  
unit.  
– 50 mm between the back wall  
and the hob cut-out.  
bSealing strip  
cHob  
dWorktop  
eClamp  
fScrew  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation instructions  
Loosen the screws f.  
Under no circumstances should  
sealant find its way between the  
frame of the top part of the hob and  
the worktop.  
This could cause difficulties or even  
damage should the hob ever need to  
be taken out for servicing. The rub-  
ber edge bunder the top part of the  
hob provides a sufficient seal for the  
worktop d.  
Set the ceramic hob cin the cut-out  
and centre it.  
(The Miele inscription must be  
legible at the front).  
Turn the clamps outwards eand  
tighten the screws (5).  
Check that the hob unit (2) fits tightly  
on to the worktop.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation instructions  
Building-in  
KM 202  
Hobs with enclosed hotplates  
These hobs are classified in Germany  
as “Y” class for heat protection. They  
must be positioned so that there is ade-  
quate ventilation. There may be a wall  
at the rear, and wall or tall units at one  
side. On the other side however no unit  
or divider must stand higher than the  
hob.  
The template provided with the hob  
must be used when cutting out the  
worktop, (cut-out with rounded  
edges).  
KM 200  
* building-in height  
KM 201  
Because of the heat given off, there  
must be a minimum distance as fol-  
lows:  
– 40 mm between the hob cut-out  
and adjacent furniture, e. g. tall  
unit.  
– 50 mm between the back wall  
and the hob cut-out.  
* building-in height  
Prepare the worktop cut-out as  
shown in the illustrations.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation instructions  
1
2
3
5
4
bSealing ring  
cHob  
dWorktop  
eClamps  
fScrew  
Loosen the screws f.  
Set the hob unit cinto the cut-out  
and centre it.  
Turn the screws fto the right, until  
the clamps eare firmly attached to  
the worktop d.  
Check that the hob unit cfits tightly  
on to the worktop.  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation instructions  
Underbench-oven with hob  
controls (cooker)  
Turn off the mains electricity supply  
to the isolator.  
Connect cooker cable to isolator.  
Then open the oven door and screw  
the oven to the side panels of the  
base unit through the two holes, one  
on each side of the oven trim.  
Align the cooker in front of the base  
unit.  
Connect the hob plug to the socket  
on the cooker.  
The appliance must only be oper-  
ated when it has been built in.  
Push the appliance into the oven  
base unit as far as the oven trim and  
align.  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation instructions  
For Australia and New Zealand only:  
The cable should be in conduit ap-  
proved by the electricity regulatory  
bodies. Only a suitably competent  
person should install the connect-  
ing cable from the control unit to the  
hob.  
Remote installation of underbench  
oven  
The underbench oven must be built  
in within view of the hob.  
The cable conduit must meet statu-  
tory electrical requirements and  
have an inner diameter of at least  
29 mm for the power cable.  
The conduit length should be suffi-  
cient to ensure the cable cannot be  
touched for the whole distance be-  
tween the additional connector box  
and the control unit.  
To install a underbench oven at "eye  
level" a special accessory kit is re-  
quired for connection to the hob.  
Do not install the oven directly  
above a hob. Exposure to direct  
heat could be damaging.  
This unit is obtainable from your Miele  
dealer, or the Miele Spare Parts dept,  
and consists of two 3.5 metre long con-  
necting cable and an additional con-  
nector box.  
The oven must be separated by a  
secured shelf from the rest of the  
space in the wall unit, to make it in-  
accessible.  
For the connection of the under-  
bench oven H 212 E only one  
power supply cable is required.  
No data cable is needed.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation instructions  
Disconnect the mains electricity  
supply to the appliance.  
Install the hob.  
Starting from the wall unit push the  
cables into the ducting.  
The plugs on the connecting cables  
and the sockets on the hob are  
coded with the same colour for  
matching.  
Connect the plugs of the connecting  
cables into the corresponding  
sockets on the additional connection  
box, and connect the individual  
wires according to the wiring plan  
supplied.  
bunderbench-oven, installed remotely  
ccable in ducting  
Secure the connecting cables in the  
connection box with the strain relief  
clip.  
dhob  
ecable to hob  
fadditional connector box  
gprotective shelf below  
hback wall of unit  
Fit the hob plug into the socket.  
For safety reasons, a protective shelf  
must be installed as shown to ensure  
that inadvertant contact with the hot  
underside is prevented.  
The distance between the lower  
edge of the worktop and the upper  
edge of the protective shelf must be  
a minimum of 125 mm.  
In order to ensure sufficient air circu-  
lation, a gap of 20 mm must be left  
between the protective shelf and  
the rear panel of the base unit, and  
a gap of 5 mm must be left between  
the cabinet front panel and the  
benchtop.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation instructions  
Connect the oven to the electricity  
supply by the isolator.  
Place the oven into the oven housing  
unit as far as the oven trim and align.  
Screw the additional connector box  
to the protective shelf underneath  
the hob.  
In doing so make sure the connection  
box is as close to the back wall of  
the unit as possible.  
The ducting for the electric cabling  
must continue right up to the addi-  
tional connection box.  
Open the oven door and using two  
screws secure the oven to the side  
walls of the housing unit through the  
holes in the oven trim.  
The connection cables must not  
come into contact with the under-  
side of the hob. This is a fire hazard.  
Pull any superfluous cable away  
from the space under the hob.  
Fire hazard!  
The appliance must only be oper-  
ated when it has been built-in.  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation instructions  
Wall Oven  
Turn off the mains electricity supply  
to the isolator.  
Connect the oven to the electricity  
supply by the isolator.  
Open the oven door and using two  
screws secure the oven to the side  
walls of the housing unit through the  
holes in the oven trim.  
Place the oven into the oven housing  
unit as far as the oven trim and align.  
The appliance must only be oper-  
ated when it has been built in.  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Alteration rights reserved / 22 / 003  
M.-Nr. 04 325 741  
GB / IRL / ZA / AUS / NZ – 4697  
This paper consists of cellulose which has been bleached without the use of chlorine.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Milwaukee Saw HEAVY DUTY CIRCULAR SAW User Manual
Nokia Cell Phone Nokia 88xx series and 8210 User Manual
Nokia Satellite TV System 9820 T User Manual
Omron Healthcare Blood Pressure Monitor HEM 790IT User Manual
Omron Stud Sensor ZS MDC User Manual
Oreck Sander LB8005 User Manual
Panasonic Car Video System DVDXV10 User Manual
Panasonic DVR DMR T3040 User Manual
Parkside Soldering Gun PLBS 30 User Manual
Patton electronic Modem 1095RC User Manual