Miele Clothes Dryer T 8826 WP User Manual

Operating instructions

for heat pump tumble dryer

T 8826 WP

en - GB

To avoid the risk of accidents or

damage to the appliance it is

essential to read these instructions

before it is installed and used for the

first time.

M.-Nr. 09 263 310

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Caring for the environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Operating the tumble dryer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Notes on laundry care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Garment care label symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Tips on drying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

How to dry correctly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Brief instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Extra options / Delay start. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Extra options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Gentle tumble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Buzzer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Delay start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Programme overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Changing the programme sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Once a programme has started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

- changing the programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

- cancelling the programme and then selecting a different programme . . . . . 24

- cancelling the programme and then removing the laundry . . . . . . . . . . . . . . 24

Altering Delay start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Adding or removing laundry after a programme has started . . . . . . . . . . . . . . . . 24

Time remaining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Electronic system lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Emptying the condensed water container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Make sure you clean all the filters at the correct intervals. . . . . . . . . . . . . . . . . . . 27

Cleaning the surfaces of the fluff filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

1. In the door. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

2. In the door opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Cleaning the fine filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

1. Cleaning the fine filter in the door. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

2. Cleaning the fine filters in the door opening. . . . . . . . . . . . . . . . . . . . . . . . . 31

3. Cleaning the fine filter in front of the heat exchanger unit . . . . . . . . . . . . . . 32

Cleaning the tumble dryer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Check and fault messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

An unsatisfactory drying result . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Other problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Cleaning the cooling fins (bottom right grille) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Changing the lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

After Sales service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Repairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Future updates (PC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Appliance guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Front view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Transporting the dryer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Installation site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Building under a continuous worktop/ in a row of kitchen units . . . . . . . . . . . . . 44

Levelling the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Washer-dryer stack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

External condensed water outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Arranging the drain hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

External drainage via a sink or gully . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Installation conditions requiring a non-return valve . . . . . . . . . . . . . . . . . . . . . 47

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Electrical connection U.K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Consumption data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Programming functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Altering the residual moisture level in the Cottons programme. . . . . . . . . . . . . . . 52

Altering the residual moisture level in the Minimum iron programme . . . . . . . . . . 53

Anti-crease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Altering the volume of the buzzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Altering the residual moisture level in the Automatic plus programme . . . . . . . . . 56

Standby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Memory function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Keypad tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Adjusting the dryer's electronics for very soft water . . . . . . . . . . . . . . . . . . . . . . . 61

Extending the range of the drying levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Download from Www.Somanuals.com. All Manuals Search And Download.

Warning and Safety instructions

It is essential to read these instructions.

This tumble dryer conforms to current safety requirements.

Inappropriate use can, however, lead to personal injury and

damage to property.

To avoid the risk of accidents and damage to the tumble dryer,

please read these instructions carefully before using it for the first

time. They contain important information on its safety, installation,

use and maintenance.

Keep these instructions in a safe place and ensure that new users

are familiar with the content. Pass them on to any future owner.

Correct application

This tumble dryer is not designed for commercial use. It is

intended for use in domestic households and similar working and

residential environments.

The tumble dryer is not intended for outdoor use.

It must only be used as a domestic appliance to dry items which

have been washed in a water solution and which are marked on the

manufacturer's care label as being suitable for tumble drying. If

using dry cleaning kits, do so at your own risk, and follow the

instructions provided on the packaging.

Any other usage is not supported by the manufacturer and could be

dangerous. Miele cannot be held liable for damage resulting from

incorrect or improper use or operation.

Download from Www.Somanuals.com. All Manuals Search And Download.

Warning and Safety instructions

The tumble dryer can only be used by people with reduced

physical, sensory or mental capabilities, or lack of experience or

knowledge, if they are are supervised whilst using it or have been

shown how to use it in a safe way and understand the hazards

involved.

Safety with children

Children under 8 years of age must be kept away from the tumble

dryer unless they are constantly supervised.

Children 8 years and older may only use, clean or maintain the

tumble dryer without supervision if they have been shown how to do

so in a safe way and understand the hazards involved.

The tumble dryer is not a toy! To prevent the risk of injury, do not

allow children to play with it or near it, or to play with the controls.

Download from Www.Somanuals.com. All Manuals Search And Download.

Warning and Safety instructions

Technical safety

Before setting up the tumble dryer, check it for any externally

visible damage.

Do not install or use a damaged tumble dryer.

Before connecting the tumble dryer, ensure that the connection

data on the data plate (voltage and frequency) match the mains

electricity supply. If in any doubt, consult a qualified electrician.

The electrical safety of this tumble dryer can only be guaranteed

when correctly earthed. It is most important that this basic safety

requirement is observed and regularly tested, and where there is

any doubt, the household wiring system should be inspected by a

qualified electrician. Miele cannot be held liable for the

consequences of an inadequate earthing system (e.g. electric

shock).

Do not connect the tumble dryer to the mains electricity supply by

an extension lead. Extension leads do not guarantee the required

safety of the tumble dryer (e.g. danger of overheating).

If the electrical connection cable is faulty it must only be replaced

by a Miele approved service technician to protect the user from

danger.

Unauthorised repairs could result in unforeseen dangers for the

user, for which Miele cannot accept liability. Repairs should only be

undertaken by a Miele approved service technician, otherwise any

subsequent damage will not be covered by the guarantee. Ensure

current is not supplied to the tumble dryer until after maintenance or

repair work has been carried out.

Faulty components must only be replaced by genuine Miele

original spare parts. Only when these parts are fitted can the safety

standards of the tumble dryer be guaranteed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Warning and Safety instructions

The tumble dryer must be isolated from the electricity supply in

the event of a fault and during cleaning and maintenance.

The tumble dryer must not be used in a non-stationary location

(e.g. on a ship).

Do not make any alterations to the tumble dryer, unless

authorised to do so by Miele.

Heat pump technology and refrigerant:

The heat pump in this tumble dyer uses a refrigerant which is

condensed by the compressor and led in a closed circuit through

the heat exchanger unit where heat exchange with the circulating

drying air takes place.

– The humming noises caused by the heat pump are normal and do

not impair the efficient functioning of the dryer.

– The refrigerant is not flammable or explosive.

– In general it is not necessary to leave the dryer standing for any

length of time before it is put into operation provided it has been

transported correctly (see "Installation").

However, if it has not been transported as described, ensure that

the recommended standing time prior to first operation is

observed. Otherwise the heat pump can be damaged.

In areas which may be subject to infestation by cockroaches or

other vermin, pay particular attention to keeping the tumble dryer

and its surroundings in a clean condition at all times. Any damage

which may be caused by cockroaches or other vermin will not be

covered by the guarantee.

Download from Www.Somanuals.com. All Manuals Search And Download.

Warning and Safety instructions

Correct use

To prevent the risk of fire, the following textiles must not be dried

in this appliance:

– items which have not been washed.

– items, such as workwear, which have not been thoroughly

cleaned and which are still soiled with grease, oil or other

deposits (such as cosmetics, lotions etc).

If items have not been thoroughly cleaned there is a danger that

these might self-ignite when heated, even after they have been

removed from the dryer at the end of the programme.

– items (e.g. mops and floor cloths) which have been treated with

inflammable cleaning agents or which contain residues of

acetone, alcohol, benzine, petrol, kerosene, stain remover,

turpentine, wax and wax remover or other chemicals.

– items which have been splashed with hair lacquer, hair spray, nail

varnish remover or similar substances.

When washing such heavily soiled items, ensure that you use

additional detergent and select a high temperature. If in doubt,

wash the items several times.

Remove all items such as lighters and matches from pockets.

Warning: Do not switch the tumble dryer off before the drying

programme has finished. If this is done, the laundry must be hung

up or spread out to cool it down.

Download from Www.Somanuals.com. All Manuals Search And Download.

Warning and Safety instructions

To prevent the risk of fire, the following must not be tumble dried:

– items which have been cleaned using chemicals (e.g.

professional dry-cleaning agents).

– fabrics which contain a large proportion of rubber, foam rubber or

rubber-like materials. For example, products made from latex

foam rubber, shower caps, waterproof textiles, rubberised articles

and items of clothing and pillows with foam rubber filling.

– damaged items which contain padding or fillings (e.g. pillows,

jackets). When damaged, the filling can get out with the risk of

igniting in the dryer.

In many programmes, the heating phase is followed by a cooling

down phase to ensure that the items are not too hot to handle when

you remove them (this also avoids the danger of the laundry

self-igniting). The programme is not finished until the cooling down

phase has been completed.

As soon as the programme has finished, remove all laundry from the

drum.

Fabric conditioner and similar products must be used according

to the instructions on the manufacturer's packaging.

Do not let anyone sit or lean on the door, as this can cause the

tumble dryer to tip up.

Always close the door after use. This way you will avoid the

danger of:

– children climbing into the dryer or hiding things in it.

– pets or other small animals climbing into it.

Download from Www.Somanuals.com. All Manuals Search And Download.

Warning and Safety instructions

The tumble dryer must not be used:

– without the fluff filters in place or if the fluff filters are damaged in

any way.

– without the fine filters in place of if the fine filters are damaged in

any way.

This would cause an excessive build-up of fluff which in turn would

cause a fault.

After every cycle remove fluff from the surfaces of the fluff filters.

The fluff filters and the fine filters must be thoroughly dried after

cleaning. Damp or wet filters could cause operational faults.

Do not install the tumble dryer in a room where there is a risk of

frost occurring. At temperatures around freezing point the tumble

dryer may not be able to operate properly. There is a risk of damage

if the condensed water is allowed to freeze in the pump and in the

drain hose.

If the water is drained externally instead of being collected in the

condensed water container, make sure the drain hose is securely

attached if you hang it in a sink or basin to avoid the hose slipping

and the water causing damage.

Condensed water is not drinking water. It can cause health

problems in both people and animals.

Always keep the area around the tumble dryer free of dust and

fluff. Dust drawn into the tumble dryer can cause blockages in the

heat exchanger unit over time.

The tumble dryer must not be hosed down.

Download from Www.Somanuals.com. All Manuals Search And Download.

Warning and Safety instructions

Accessories

Only use genuine Miele original spare parts and accessories with

this tumble dryer.

If non-Miele parts are used, guarantee, performance and product

liability claims may be invalidated.

Miele cannot be held liable for damage caused by

non-compliance with these Warning and Safety instructions.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operating the tumble dryer

Control panel

aGentle tumble button

gCheck lights

Delicate fabrics are dried using

reduced mechanical action.

See the next page and also

"Cleaning and care", "Problem

solving guide" and "After sales ser-

vice".

bDrying level button

with indicator lights

cDisplay

hStart/Stop button

For starting or cancelling a

programme.

See next page.

The indicator light flashes while a

programme is being selected and is

then on constantly after the

programme has started.

dDelay start button

This button is used for:

- Delaying the start of a programme

- Selecting the duration of the timed

drying Warm air and Cool air

programmes

iProgramme selector

with indicator lights

jDoor button

eBuzzer button

An audible tone sounds at the end of

the programme.

Pressing this button will open the

door even when the tumble dryer is

switched off at the mains.

fPerfect Dry indicator

kOn/Off button jk

For all sensor controlled drying

programmes. See next page.

For switching the dryer on and off.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operating the tumble dryer

The display shows:

The Perfect Dry indicator will light up

again when the selected drying level is

reached and remain on until the

programme is finished.

– Programme duration

– Programme stage

Drying

The Perfect Dry indicator does not light

up during time controlled programmes:

Woollens, Silks, Cool air, Warm air,

Gentle smoothing.

Cooling down

Finish

– Check and fault messages

The following are also selected via

the display:

Programme duration /

Estimated time remaining

– Duration of the Warm air and Cool air

The estimated duration (time remaining)

will appear in the display.

programmes

The following factors all affect the

estimated time remaining: residual

moisture content after spinning; type of

fabric; size of load; room temperature;

fluctuations in power supply.

– Delay start

You can select a programme and set

it to start at a later time.

The programme will start

automatically once the delay start

time has a elapsed.

The electronics continually assess

conditions in the dryer and adjust the

estimated time remaining for a more

accurate reading. Because of this, the

time displayed can alter during the

course of a programme.

– Programmable functions

Default settings can be altered to

adapt the dryer to different

requirements. See "Programmable

functions" at the end of this booklet

for more details.

Programmes can also finish earlier than

expected, if, for example, particularly

fine fabrics are being dried, the load is

very small or items were partially dry

beforehand.

Perfect Dry indicator

The Perfect Dry system measures the

residual moisture content in the laundry

in sensor controlled programmes to

ensure perfect drying results.

After a programme has started, the

electronics will estimate the duration of

the programme (time remaining). The

Perfect Dry indicator will flash while this

is happening.

After a short while, the programme

duration will appear in the display and

the indicator will go out.

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes on laundry care

Garment care label symbols

– Pure linen should only be machine

dried if specified as suitable by the

manufacturer on the garment care

label, as the surface of the fabric

may otherwise become rough.

Drying

q/r Normal/low temperature

Drying is carried out at a low

temperature in every

– Loopknit garments (e.g. T-shirts and

underwear) tend to shrink depending

on their quality. Do not over-dry

these textiles. When purchasing

these garments it is advisable to take

their shrinkage properties into

account.

programme in this dryer, so you

do not need to sort your

garments according to whether

they have the q or r symbol.

Do not tumble dry

Ironing

Very hot

– Minimum iron fabrics tend to crease

more, the larger the load. This is also

the case for garments made from

very fine weave fabrics, such as

shirts or blouses.

Hot

Warm

Do not iron

Make sure you select a suitable

programme. If in doubt, divide the

garments into smaller loads and

select the Gentle tumble extra

option.

Tips on drying

– Always observe the maximum

recommended loads given in the

"Programme chart". Never overload

the drum.

– Starched laundry can be dried in the

tumble dryer. To achieve the usual

finish, double the amount of starch

should be used.

Overloading can cause unnecessary

wear and tear to the laundry, give a

disappointing drying result and

cause more creasing.

– New dark coloured garments should

be washed and dried separately

from light coloured garments to avoid

the danger of colours running and

discolouring other garments or even

plastic components in the dryer.

Dark coloured fibres can also settle

on light coloured garments and vice

versa.

– Do not put soaking wet items into the

tumble dryer. Spin fabrics for at least

30 seconds before drying.

– Open jackets so that they can dry

evenly.

– Use the Automatic plus programme

for drying mixed loads of cottons and

minimum iron fabrics.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to dry correctly

Brief instructions

C Load the tumble dryer

The headings numbered (A, B, C ...)

show the operating sequence and can

be used as a brief guide to using your

dryer.

^ Press the Door button to open the

door.

^ Load the laundry loosely into the

drum.

A Sort the laundry

Do not overload the drum. See the

"Programme chart" for

To ensure an even drying result

separate out the washed laundry and

sort it according to:

recommended loads for each

programme.

. . . the drying level required

. . . the type of fibre or weave

. . . size

Overloading can cause unnecessary

wear and tear to the laundry and

give a disappointing drying result.

. . . the moisture content after spinning.

^ Before closing the door make sure

,^{Make sure that objects e.g.}

detergent dispensing balls have

been removed from the laundry.

They could melt, and cause damage

to the dryer or the laundry.

the fluff filter is correctly positioned.

– Check seams and stitching to ensure

that padding and linings are intact.

– Fasten duvet covers and pillow

cases to prevent small items from

being trapped inside them.

– Fasten hooks and eyes etc.

– Tie fabric belts and apron strings.

– Sew in or remove underwiring from

bras.

Check the laundry is right inside the

drum so that it cannot get trapped or

damaged when the door is shut.

B Turn on the tumble dryer

^ Switch the dryer on by pressing the

On/Off jk button in.

^ Shut the door either with a gentle

swing, or lean against it and push it

shut.

The tumble dryer may be switched on

after loading, saving energy as the light

will not come on.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to dry correctly

DSelect a programme

Woollens, Silks, Gentle smoothing

programmes

The programme duration/drying level

cannot be changed.

Selecting the duration of the timed

drying Cool air and Warm air

programmes

The indicator light for the Delay start

button will flash when the Cool air or

Warm air programme is selected.

^ Select the programme you want.

^ Press the Delay start button

repeatedly until the required duration

shows in the display.

The indicator for the programme

selected will light up.

A drying level or extra option indicator

may also light up and the duration may

also be displayed.

You can select the duration in stages

for:

– Cool air: from 20 minutes up to i:00

Drying level programmes

hour.

– Cottons, Minimum iron, Delicates,

Express, Automatic plus, Denim,

Shirts

– Warm air: from 20 minutes up to 2:00

hours.

ESelect any Extra options / Delay

start

^ Gentle tumble, Buzzer and Delay

start are selected by pressing the

appropriate button (see "Extra

options/Delay start").

Anti-crease (see next page) is

permanently switched on.

N.B.: It is not possible to select Delay

start when using the Warm air or Cool

air programme.

^ Press the drying level button

repeatedly until the indicator for the

drying level you want lights up.

Any of the four drying levels can be

selected for the Cottons and Express

programmes. On the other

programmes, the choice of drying level

is limited.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to dry correctly

FStart the programme

GRemove the laundry at the end of

the programme

The Start/Stop button will flash when a

programme is being selected. The

flashing indicates that a programme

can be started.

0 and Finish will appear in the display

to indicate that the programme has

finished. The buzzer (if selected) will

sound at intervals.

^ Press the Start/Stop button.

The drum will continue to rotate at

intervals for up to two hours to prevent

laundry creasing, if you do not wish to

remove it immediately (anti-crease).

There is no anti-crease phase at the

end of the Woollens programme.

The Start/Stop button will now light up

constantly.

The Perfect Dry indicator will flash or

light up constantly with the sensor

controlled drying programmes. It will

not come on at all with timed drying

programmes (see "Operating the

tumble dryer").

^ Press the Door button.

^ Open the door.

Please note: The programme duration

shown in the display is an estimate and

can vary.

^ Remove the laundry.

Check that all items have been

removed from the drum. If items are

left in the dryer, they could be

damaged by overdrying when the

dryer is next used.

Before the end of a programme

There is a cooling down phase at the

end of the drying sequence (Cooling

down will light up). The programme is

not finished until the cooling down

phase has been completed.

If the dryer is switched on at the mains

and the door is opened, the drum

lighting will come on. It will go out a few

minutes later to save energy.

^ Press the jk button to switch the

dryer off.

^ Clean the fluff filters.

^ Close the door.

^ Empty the condensed water

container (unless the dryer has been

connected for external drainage).

Download from Www.Somanuals.com. All Manuals Search And Download.

Extra options / Delay start

Extra options

– If you keep the Delay start button

pressed in, the time will continue to

increase up to 24^.

The relevant indicator light will come on

when the option is selected.

To begin delay start

Gentle tumble

^ Press the Start/Stop button.

For drying items which can be dried in

a tumble dryer but which are

– The Delay start indicator will light up

particularly susceptible to creasing or

which are not suitable for drying with a

great deal of mechanical action. When

this option is selected, the drum will

rotate less frequently.

constantly.

– Delay start times of more than i0^

will count down in hours, and of less

than i0^ in minutes to the start of the

programme.

The programme duration is longer.

If in doubt, reduce the load.

– The drum will turn briefly every hour

to help prevent creasing.

Buzzer

To cancel / alter delay start

A buzzer sounds (at intervals for a

maximum of 1 hour) to let you know the

programme has finished.

^ Press the Start/Stop button to cancel

delay start.

^ To alter the delay start time, press the

Delay start button repeatedly until the

required delay period shows in the

display.

The buzzer will always sound when

there is a fault, even if it has been

switched off.

Delay start

^ Press the Start/Stop button to start

the altered delay start time counting

down from the beginning again.

Delay start allows you to delay the start

of a programme from 30 minutes up to

a maximum of 24 hours.

To add laundry after the delay start

time has started counting down

^ Select a programme.

^ Press the Delay start button

repeatedly until the required delay

period shows in the display.

While the delay start time is counting

down, you can still add laundry to the

drum:

– The Delay start indicator light will

^ Switch the dryer off.

flash.

Opening the door without switching the

dryer off will cancel delay start.

– Times of up to i0^ are selected in

steps of half an hour, and more than

i0^ in one-hour steps.

^ Open the door and add the laundry.

^ Close the door and switch the dryer

back on again.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programme overview

Cottons

Max. load 7 kg*

Extra dry, Normal**

Use for

Single and multi-layered cotton fabrics such as Towelling,

T-shirts, underwear, flannelette bed linen and baby clothes.

Notes

– Select Extra dry for multi-layered and very thick fabrics.

– Do not use Extra dry for loopknit fabrics (e.g. T-shirts,

underwear, baby clothes), as they have a tendency to shrink.

Gentle tumble – For items which are not suitable for drying with a great deal of

mechanical action.

Hand iron**, Machine iron

Use for

Cotton or linen fabric, e.g. table linen, bed linen, starched

laundry.

Note

– To prevent laundry from drying out it should be rolled up until

you are ready for ironing.

Minimum iron

Max. load 3.5 kg*

Normal**, Hand iron

Use for Minimum iron cotton, synthetic and mixed fibre fabric, e.g. tops,

dresses, trousers, skirts and table cloths.

Gentle tumble – For items which are not suitable for drying with a great deal of

mechanical action.

Delicates

Max. load 2.5 kg*

Normal, Hand iron

Use for

Synthetic, mixed fibre, rayon and easy care cotton, e.g. shirts,

blouses, lingerie and appliquéd garments.

* Weight of dry laundry

** Note for test institutes: Use this programme without selecting Gentle tumble

for testing according to Standard EN 61121.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programme overview

Woollens

Max. load 2 kg*

Woollen garments. Fabrics containing wool blends.

– Woollen garments are fluffed up.

Use for

Notes

– Remove garments as soon as the programme has finished.

Silks

Max. load 1 kg*

Use for

Silks (those suitable for drying in a tumble dryer), e.g. blouses

and shirts.

Notes

– Smooths out creasing.

– Remove garments as soon as the programme has finished.

Max. load 3.5 kg*

Express

Extra dry, Normal, Hand iron, Machine iron

Use for

Fabrics which can tolerate high temperatures and which can be

dried using the Cottons programme.

Note

– The programme duration is shorter.

Automatic plus

Max. load 5 kg*

Normal, Hand iron

Use for

Mixed loads of garments suitable for the Cottons and Minimum

iron programmes. Sort according to colour.

Denim

Max. load 3 kg*

Normal, Hand iron

Use for

Denim garments, e.g. jeans, jackets, skirts, shirts.

Gentle tumble – For items which are not suitable for drying with a great deal of

mechanical action.

Shirts

Max. load 2 kg*

Normal, Hand iron

Use for

Shirts and blouses.

Gentle tumble – For items which are not suitable for drying with a great deal of

mechanical action.

* Weight of dry laundry

Download from Www.Somanuals.com. All Manuals Search And Download.

Programme overview

Cool air

Use for

Max. load 7 kg*

Any item which only needs airing.

Warm air

Use for

Max. load 7 kg*

– Drying voluminous and multi-layered fabrics whose layers have

different drying characteristics, e.g. jackets, pillows.

– Drying individual items, e.g. bath towels, swimwear, tea-towels.

Note

– Do not select the longest drying time to start with. Check the items

as you are drying them to find the optimum time.

You can use the Warm air programme to help remove odours from

clean cotton clothing (select a duration of between 1/2 and 1 hour).

Items must be suitable for drying in a tumble dryer. Dampen the

garments a little beforehand or add a fabric conditioner sheet.

Odours will not be removed as effectively from any parts of the

garments which are made of synthetic fibres.

Gentle

tumble

– For items which are not suitable for drying with a great deal of

mechanical action.

Gentle smoothing

Max. load 1 kg*

Use for

– Cotton and linen fabric.

– Minimum iron mixed fibre, cotton or synthetic fabric, e.g. trousers,

anoraks, shirts.

Notes

– Suitable for both dry and damp laundry.

– Smooths out creasing caused during the spin cycle in the washing

machine.

– Remove garments as soon as the programme has finished so that

they are easy to iron.

* Weight of dry laundry

Download from Www.Somanuals.com. All Manuals Search And Download.

Changing the programme sequence

Once a programme has started Altering Delay start

^ See "Delay start".

- changing the programme

You cannot change to another

Adding or removing laundry

programme once a programme has

started (this prevents unintentional

alterations).

after a programme has started

^ Press the Door button.

^ Open the door.

You will need to cancel the current

programme before you can select a

new one.

^ Add or remove items as required.

^ Close the door.

- cancelling the programme and then

selecting a different programme

^ Press the Start/Stop button.

Time remaining

The items will be cooled down,

depending on the temperature

reached and how long they have

been dried for.

The time left shown in the display may

now vary from the actual drying time.

If you press the Start/Stop button

again during the cooling down

phase, Finish will light up in the

display.

^ Press the Door button.

^ Close the door.

^ Select another programme and start

it.

- cancelling the programme and then

removing the laundry

^ Proceed as described in "Adding or

removing laundry after a programme

has started" below.

^ Switch the dryer off after closing the

door.

Download from Www.Somanuals.com. All Manuals Search And Download.

Electronic system lock

D Now slowly turn the programme

selector six positions stage by stage

in an anti-clockwise direction.

Each of the six programme indicator

lights must come on one after the

other.

The system lock prevents the dryer

being used without your knowledge.

It can be activated if wished.

The dryer's electronics are then locked.

The dryer can still be switched on but a

programme cannot be started.

The indicator light for the Gentle tumble

button will flash, and the key symbol

0-§ will appear in the display.

– If an attempt is made to start a

programme, the indicator light for the

Gentle tumble button will come on

and a key symbol 0-§ will appear in

the display.

E Release the Gentle tumble button.

The electronics have now been locked.

^ Switch the dryer off.

The door is not locked and can be

opened at any time.

To deactivate the lock

Before you begin, first ensure that:

– The tumble dryer is switched off.

– The door is closed.

To activate the lock

Before you begin, first ensure that:

– The tumble dryer is switched off.

– The door is closed.

^ The procedure is the same as for

activating the lock. Carry out steps A

to E as described previously.

A Press the Gentle tumble button and

keep it pressed in whilst carrying out

steps B to E.

At step E the indicator light for the

Gentle tumble button will stop flashing

and the key symbol 0-§ will go out.

B Press the jk button.

The electronics are no longer locked.

The Automatic plus indicator light will

come on.

C Slowly turn the programme selector

three positions stage by stage in a

clockwise direction.

Each of the three programme

indicator lights must come on one

after the other.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and care

Emptying the condensed

water container

The condensed water will be collected

in the condensed water container

unless the dryer has been connected

for external drainage (see "Installation").

Empty the condensed water

container after every drying

programme.

The Empty container indicator will light

up if the maximum level of the

^ Empty the container.

condensed water container is reached.

The indicator light will go out when the

door is opened and closed again.

^ Replace the container in the dryer.

,^{Condensed water should not be}

consumed. It could lead to health

problems for people and animals.

Condensed water can be put to

household use (e.g. in a steam iron or

humidifier). To ensure that any residual

particles of fluff in the condensed water

are removed before use, pass it

through a fine sieve or paper filter first.

^ Pull out the condensed water

container.

^ To prevent water running out, hold it

at the front and towards the back and

keep it in a horizontal position when

carrying it.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and care

This tumble dryer has a multi-stage

filter system, consisting of the fluff

filters and additional fine filters in the

door and the door opening. There is

also a fine filter in front of the heat

exchanger for added protection.

When to clean the surfaces of

the fluff filters

The surfaces of the fluff filters:

(1.) in the door

(2.) in the door opening should be

cleaned after each drying

programme

Make sure you clean all the

filters at the correct intervals.

When to clean the additional

fine filters

The filters are located in the

following three positions:

The additional fine filters:

(1.) in the door

(2.) in the door opening should be

cleaned after 10 drying

programmes.

1. in the door

The fine filter

(3.) in front of the heat exchanger

should be cleaned when the Clean

the filters indicator light comes on.

2. in the door opening

3. in front of the heat exchanger unit.

,^{The dryer must not be used}

without the fluff filters or fine filters in

place or if the fluff filters/fine filters

are damaged in any way. This would

cause an excessive build-up of fluff

which in turn would cause a fault.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and care

Cleaning the surfaces of the

fluff filters

^ Use your fingers or a vacuum cleaner

to remove the fluff from the surface of

the filter.

Hair and fluff on garments are collected

by the fluff filters in the door and the

door opening.

Extra cleaning

^ Remove any fluff from the hollow part

of the door with a bottle brush or a

vacuum cleaner.

Tip: You can use a vacuum cleaner to

remove the fluff.

^ Also clean the door seal (2) with a

Clean the surfaces of the fluff filters

in the door and the door opening

after each drying programme.

damp cloth.

^ Push the filter back into the door until

it clicks into position. Ensure it is

facing the correct way.

1. In the door

2. In the door opening

^ Open the door and pull the fluff filter

(1) out of the door as illustrated.

^ Use your fingers or a vacuum cleaner

to remove the fluff from the two fluff

filters in the door opening.

^ Close the door.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and care

Cleaning the fine filters

1. Cleaning the fine filter in the door

The additional fine filters collect finer

fluff, hair and detergent residues which

have got through the surfaces of the

fluff filters in the door and the door

opening.

Components of the fluff filter in the door

The additional fine filters do not

need to be cleaned after each

drying programme.

– The additional fine filters in the

door and in the door opening

should be cleaned after 10 drying

programmes.

1 Fluff filter

– The fine filter in front of the heat

exchanger should only be cleaned

when the Clean the filters indicator

light comes on.

2 Fine filter frame holder

3 Fine filter frame

4 Fine filter

,^{The fine filters must be cleaned}

thoroughly under running water.

They must not be replaced in the

dryer dripping wet. Squeeze them

thoroughly.

^ Open the door and pull the fluff filter

out of the door as described

previously.

^ Remove the fine filter (4) as

If the fluff filters in the door and the

door opening have also been

cleaned under running water, they

must be dried.

described on the following pages.

Otherwise they could cause

operational faults.

,^{Always replace the fine filters if}

they are damaged (available to

order from Miele).

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and care

Removing

Replacing

^ Place the fluff filter (1) on a flat

surface.

aPress holder (2) on the filter frame

gently inwards until the filter frame

disengages from the fluff filter.

^ Place the fine filter (4) exactly in the

middle of the hollow area in the fluff

filter.

bPull filter frame (3) out of the fluff filter ^ Place the fine filter frame (3) on the

by the holder.

^ Remove fine filter (4).

Cleaning

fine filter - the holder (2) must face

upwards.

^ Press the fine filter frame at the top

and bottom until it clicks into position

in the fluff filter.

^ Clean the fine filter thoroughly under

running water.

^ Push the filter back into the door until

it clicks into position. Ensure it is

facing the correct way.

^ Then squeeze the fine filter

thoroughly.

^ Clean the fine filter frame, if

necessary.

^ The surface of the fluff filter must also

be cleaned under running water if

there is a great deal of compacted

fluff on it.

^ Dry the fluff filter and the filter frame.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and care

2. Cleaning the fine filters in the door Cleaning

opening

^ Clean both fine filters thoroughly

Removing

under running water.

^ Then squeeze the fine filters

thoroughly.

^ The surface of the fluff filters in the

door opening must also be cleaned

under running water if there is a great

deal of compacted fluff on them.

^ Dry both fluff filters.

^ If necessary, clean the hollow area in

the door opening (underneath the

fluff filters) with a vacuum cleaner.

Replacing the fine filters (bottom

picture)

^ Turn dial a until you hear it click.

^ Insert the holder of the fine filter with

its groove on top of the ridge (see

detail).

^ Pull the filter out of the door opening

by the dial as shown b. Do the same

on the other side.

^ Insert the bottom end of the fine filter

under the edge.

Both fine filters must lie flush in the

middle of the hollow area.

Replacing the fluff filters (top picture)

^ Replace the fluff filters by inserting

them at the bottom and pressing

them into place at the top.

^ Lock both dials (you will feel them

click into position).

^ Grasp the fine filter by its holder and

pull the fine filter upwards.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and care

3. Cleaning the fine filter in front of

the heat exchanger unit

Removing

^ Pull the fine filter out by the handle.

^ Use the yellow lever (supplied) to

open the access panel.

^ Insert the lever in the middle of the

gap and lift it up gently (see arrow)

until the panel opens out at the top.

^ Remove the panel.

^ Press the stoppers gently together

and then pull them out of the handle.

^ Pull the handle out of the fine filter.

Cleaning

^ Clean the fine filter thoroughly under

running water.

^ Then squeeze the fine filter

thoroughly.

^ Turn the lever on the inner cover

downwards to the vertical position.

^ Pull the cover forwards.

^ Remove it by pulling it diagonally

upwards.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and care

Replacing

Cleaning the tumble dryer

^ Insert the fine filter on the handle.

Disconnect the dryer from the mains

electricity supply.

^ Press the stoppers into the openings

of the handle (until you feel them

click into position).

^ Clean the housing, control panel and

door seal with a slightly damp cloth

and a mild detergent or soapy water.

^ Push the fine filter back into the

opening in front of the heat

exchanger unit.

^ The drum and other stainless steel

parts can be cleaned with a suitable

proprietary stainless steel cleaner

following the manufacturer's

instructions.

When replacing the inner cover,

ensure that the rubber seal fits

correctly into the groove.

Do not use solvents, abrasive

cleaners, glass cleaners or

all-purpose cleaners. These could

damage plastic sufaces and other

parts.

^ Replace the cover making sure the

hooks locate correctly. Hold it at an

angle and push it gently downwards.

^ Then turn the lever upwards into the

horizontal position to lock the cover.

^ Dry all parts with a soft cloth.

^ Replace the access panel and press

the upper edge until it clicks into

position.

,^{The cover must be replaced and}

locked correctly to ensure that no

water can leak from the heat

exchanger unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

With the help of the following notes minor faults in the performance of the

appliance, some of which may result from incorrect operation, can be put right

without contacting the Service Department.

,^{Repair work to electrical appliances should only be carried out by a}

suitably qualified person in strict accordance with current local and national

safety regulations. Repairs and other work by unqualified persons could be

dangerous. The manufacturer cannot be held liable for unauthorised work.

Check and fault messages

Problem

Possible cause

Remedy

0-§ appears in the

The electronic system

lock is activated.

You will need to deactivate the

system lock before the dryer

can be used (see "Electronic

system lock").

display.

The Gentle tumble

indicator light is

flashing.

The programme

stops and

This is not a fault.

Use the Warm air programme

for drying individual items.

The electronic unit has

0 and Finish appear recognised that there is

– Open and shut the door.

in the display.

no laundry or insufficient

laundry in the drum and

cancelled the

The buzzer sounds.

programme. Drying

individual garments or

items which are already

dry can also cause the

programme to be

cancelled.

The programme

stops.

No obvious cause.

– Switch the dryer off and

back on again.

The buzzer sounds.

– Then start the programme

again.

Cooling down or

Finish may also

flash in the display.

If this problem happens again,

there is a fault. Contact Miele.

Bars are flashing at The programme has

You can either unload the

the end of the

programme:

—œ–...C~–...Cœ˜...

finished but the laundry is drum and leave the laundry to

still being cooled down.

cool at room temperature or

leave it in the dryer to continue

cooling.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

Problem

Possible cause

Remedy

The Clean the filters

This is a reminder to

– Clean the fine filter.

indicator light comes on clean the fine filter in front

See "Cleaning and

care".

at the end of the

programme.

of the heat exchanger unit

under running water.

To switch off this

reminder:

– Switch the dryer off

and then back on

again.

– Open and shut the

door with the dryer

switched on.

The Empty container

indicator light comes

on.

The condensed water

container is full or there is

kink in the drain hose.

– Empty out the

condensed water

container.

The buzzer sounds.

– Check the drain hose.

To switch off this

warning:

– Open and close the

door.

The Start/Stop button is The dryer is in Standby

flashing slowly and the mode.

See "Programmable

functions".

display is dark.

This is quite normal and

not indicative of any fault.

The Start/Stop button

The flashing indicates

After the programme has

flashes/does not flash. that a programme can be started, the flashing will

started. change to a constant

light.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

An unsatisfactory drying result

Problem

Possible cause

The load consisted of

different fabrics.

Remedy

The laundry is not

sufficiently dry.

– Finish drying using the

Warm air programme.

– Select a different

programme next time *.

Items made of synthetic Synthetic fibres tend to

fibres are charged with attract static charge.

static electricity after

Static charge can be

reduced by adding a

fabric conditioner to the

final rinse in the washing

programme or a fabric

conditioner sheet to the

load when drying.

drying.

There is a build-up of

fluff.

Fluff is principally the

result of friction when

Fluff is collected by the

fluff filters and can be

garments are being worn removed easily (see

and to some extent when "Cleaning and care").

they are being washed.

Machine drying does not

affect the lifetime of the

fabric.

* You can alter the drying levels for some programmes (see "Programmable

functions" at the the end of this booklet).

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

Other problems

Problem

Possible cause

Remedy *

The drying

Ventilation to and from the – Open a door or window while

process goes dryer may be insufficient,

on too long or e.g. because it is installed

even switches in a room which is too

the dryer is in operation for

increased air flow.

off.

small. This can cause the

temperature in the room to

rise sharply.

– Detergent residues, hair – Clean the fluff filters and fine

and fine fluff can clog the

fluff filters and the fine

filters.

– Remove any visible fluff:

. . . From the heat exchanger

unit, bottom left (see "Cleaning

and care").

– The cooling ribs can be

clogged.

. . . From the cooling fins

behind the grille, bottom right

(see this section).

The cool air intake panel is – Move any objects, such as a

blocked.

laundry basket, away from the

panel.

The fluff filters and fine

filters were wet when

replaced.

– The fluff filters and fine filters

must be dry.

The laundry has not been

spun sufficiently.

– Make sure that your laundry is

thoroughly spun at the

appropriate spin speed in the

washing machine.

The tumble dryer has been – Do not exceed the maximum

overloaded.

load for the programme

selected.

Metallic components, e.g.

zips have prevented the

dryer from registering the

correct moisture level in the

laundry.

– Open zips next time.

– If the problem occurs again,

dry garments with long zips

using the Warm air programme

(timed drying).

* Switch the dryer off and then on again before starting the programme.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

Problem

Possible cause

Remedy

There are humming

noises.

The compressor is

operating.

These noises are quite

normal and do not

indicate a fault.

The programme does

not start.

No obvious cause.

– Is the dryer switched

on?

– Is the plug correctly

inserted into the socket

and switched on?

– Is the door closed

properly?

– Has the fuse or circuit

breaker tripped?

Power cut.

A programme which was running previously will

continue automatically when power is restored to the

tumble dryer as long as the Cooling down phase had

not been reached.

The interior drum

The lighting switches off – Switch the dryer off

lighting does not come automatically (to save

on. energy).

and then on again.

– If the lamp needs to be

replaced, follow the

instructions in

"Changing the lamp" at

the end of this section.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

Cleaning the cooling fins

(bottom right grille)

,^{To prevent damaging the}

cooling fins, only pass the vacuum

cleaner brush over them lightly,

without applying any pressure.

,^{In general, the cooling fins do}

not need cleaning. They should only

be cleaned if the drying process is

taking an exceptionally long time

due to a very high level of dust or

fluff in the room in which the dryer is

installed.

Use the yellow lever supplied to open

the bottom right grille.

^ Vacuum up any soiling carefully

using a vacuum cleaner dusting

brush or small crevice nozzle.

^ Insert the lever in the middle of the

gap at the top and lift it up gently

(see arrow) until the grille opens out

at the top.

^ Now remove the grille by pulling it

diagonally upwards.

^ Check whether the cooling fins are

clogged.

^ To replace the grille, first insert the

bottom of the grille (as shown).

,^{Danger of injury.}

Do not touch the cooling fins with

^ Then push the grille firmly into

your hand. You could cut yourself.

position at the top.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

Changing the lamp

The lamp specification and

Disconnect the tumble dryer from

the mains electricity supply.

maximum wattage is stated on the

data plate and on the lamp cover.

^ Open the door.

^ Replace the lamp.

You will find the interior lamp cover at

the top of the drum aperture.

^ To close the cover push it upwards

and press it on the left and right until

you hear it click into position.

,^{Ensure that it is fitted into}

position securely, as any moisture

could cause a short circuit.

^ Insert a suitable tool, such as a wide

bladed screwdriver, under the side

edge of the lamp cover as illustrated.

^ Apply a little pressure and whilst

doing so turn your wrist in the

direction of the arrow to open the

cover.

The cover will open downwards.

The temperature resistant lamp should

only be ordered from your Miele Dealer

or the Miele Spare Parts Department.

Download from Www.Somanuals.com. All Manuals Search And Download.

After Sales service

Repairs

Future updates (PC)

In the event of any faults which you

The indicator or check light marked PC

cannot remedy yourself, please contact on the fascia panel is the interface used

by the Miele service technicians during

– your Miele dealer or

service work for testing purposes and

– the Miele Service Department (see

back cover for contact details).

for updating the appliance's

programme data.

When contacting your dealer or the

Service Department, please quote the

model and serial number of your

Appliance guarantee

Please see the guarantee card

supplied with your appliance.

appliance, both of which are shown on

the data plate situated on the right

hand side below the drum aperture.

Optional accessories

Optional accessories for this dryer are

available from your Miele Dealer, the

Miele Spare Parts Department or via the

internet at www.miele-shop.com.

Please note that telephone calls may

be monitored and recorded for

training purposes.

N.B. A call-out charge will be

applied for service visits where the

problem could have been resolved

as described in these instructions.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Front view

aMains connection cable

bControl panel

fFour height adjustable screw feet

gCool air intake panel

cCondensed water container

dDoor

hExternal drainage of condensed

water hose

(see "External condensed water

outlet")

eService panel for heat exchanger

unit (for cleaning or replacing the

fine filter)

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Rear view

,^{If transporting the dryer at an}

angle, only tip it towards its left side.

aProtruding lid for holding when

moving the dryer (see arrows)

bMains connection cable

cHose for external drainage of

condensed water

dAccessories for connection to a sink

drain outlet

Transporting the dryer

When moving the dryer, hold it by the

lid where it protrudes to the rear. To

manoeuvre the dryer out of its packing

case to its installation site you will also

need to hold it by the front feet.

,^{Only transport the dryer as}

shown in the following illustrations.

,^{If the tumble dryer has not been}

transported as described, then it

must be left to stand for at least 1

hour before it is connected to the

electricity supply. Otherwise the

heat pump can be damaged.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Before moving the tumble dryer

again (e.g. when moving house)

A build-up of heat can be avoided by:

– Adjusting the screw feet so that there

is a gap of at least 20 mm between

the floor and the bottom of the dryer.

After each use a small quantity of

condensed water will collect in the area

around the pump. This water can run

out if the tumble dryer is tipped up

when it is being moved. It is a good

idea to run the Cool air programme for

approximately 1 minute before moving

it. Any remaining condensed water will

then be fed into the condensed water

container or out through the drain hose.

– Creating a gap for the dryer in the

kitchen furniture plinth facing.

– Creating ventilation gaps in the

kitchen unit.

N.B. When built under, drying times

may be longer.

,^{The dryer should not be installed}

next to a refrigeration appliance. The

warm air expelled from the rear of

the dryer would increase the

Installation site

,^{Make sure the dryer door can be}

opened without hindrance after

installation.

temperature around the refrigeration

appliance's heat exchanger causing

the compressor to run continuously.

If it is not possible to install the dryer

anywhere else, then the refrigeration

appliance must be sealed off from

the dryer.

,^{The cool air intake panel at the}

front of the dryer must not be

blocked or covered, e.g. by a

laundry basket, as this would cause

a fault.

,^{A building-under kit (Miele}

accessory, available to order) with a

coverplate to replace the

Building under a continuous worktop/

in a row of kitchen units

appliance´s lid is required. It must

be fitted by a suitably qualified

person to ensure electrical safety.

,^{It is very important to avoid a}

build-up of heat.

The warm air which is expelled from

the rear of the dryer must be able to

dissipate.

N.B. If you wish to push the tumble

dryer under a worktop and there is

space to do this without removing

the lid the building-under kit is not

necessary. Otherwise the

Warm air which cannot dissipate

could cause a fault.

building-under kit is essential.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

– The building-under kit is supplied

with its own installation instructions.

– N.B. When built under, drying times

may be longer.

– The electrical socket must be

located in an accessible position

near the appliance.

With niche heights of:

– 830-840 mm, longer screw feet* are

required.

– 870-885 / 915-930 mm, one or two

raising kits* are required.

^ The screw feet can be adjusted to

compensate for any unevenness in

the floor.

* Miele accessory available to order

Replacing the lid

,^{Do not block the gap between}

the bottom of the tumble dryer and

the floor with plinth facings, deep

pile carpet etc. This would hinder a

sufficient flow of air to the dryer.

If the lid has been removed in order to

fit a coverplate, ensure that, if the lid is

ever replaced, it fits securely into the

rear holders. Otherwise, it is not

properly secure for transport.

Washer-dryer stack

Levelling the appliance

The tumble dryer can also be

combined with a Miele washing

machine in a washer-dryer stack. The

appropriate "WTV" stacking kit* to

match your dryer is required.

* Miele accessory available to order

,^{Stacking kits must only be}

installed by a suitably qualified fitter.

The appliance must be perfectly level

to ensure safe and proper operation.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

External condensed water

outlet

^ There will be a small amount of

residual water in the drain hose.

Have a container ready to collect

this.

General notes

When drying is in progress, condensed

water is pumped into the condensed

water container through the drain hose at

the back of the dryer. The condensed

water can also be drained off directly if

the tumble dryer is installed near a sink,

drain outlet etc. so that the condensed

water container does not have to be

emptied.

Drain hose length . . . . . . . . . . . . 1.50 m

Maximum delivery head . . . . . . . 1.50 m

Maximum drain hose length . . . . 4.00 m

^ Pull the hose off its connection (see

arrow).

,^{If the on-site water drainage}

system is not fitted with a non-return

valve or an appropriate air gap, one

must be fitted to prevent the risk of

back-flow. (See "Installation conditions

requiring a non-return valve").

^ Allow any residual water to run into

the container.

^ Unwind the hose and pull it carefully

out of the holders.

The following optional accessories are

available:

– an extension hose

– a non-return valve kit for connection

to an external condensed water

outlet (includes an extension hose).

Maximum delivery head with

non-return valve fitted: 1.00 m

Arranging the drain hose

,^{Do not pull on the drain hose and}

do not stretch it or allow it to become

kinked as it could get damaged.

^ Position the hose to the right or left

hand side as necessary.

Leave the hose in the middle holder to

prevent it from becoming kinked

inadvertently.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

External drainage via a sink or gully

Example: Connection to a sink drain

outlet

^ See "Front view" illustration.

The drain hose with non-return valve

fitted can be connected directly to a

suitable sink drain outlet.

,^{If you want to drain the water off}

into a sink you will need to secure

the hose carefully, e.g. by tying it to

a tap to make sure it cannot slip

during use. Otherwise there is a risk

of overflowing water which could

cause damage.

^ Use the bow-shaped guide to

prevent the drain hose from

becoming kinked.

Installation conditions requiring a

non-return valve

,^{Certain installation conditions}

require the fitting of a non-return

valve for external water

^ Remove the following from the back

of the dryer at the top:

connection (available as an

optional accessory). A non-return

valve will prevent the risk of

back-flow out of the dryer which

could cause damage.

Adapter 1 and hose clip 3 behind it.

A non-return valve is required:

– If the tumble dryer is connected to a

sink drain outlet (see the following

section).

– If the tumble dryer is connected to a

drainage system already in use by

another appliance, e.g. a dishwasher

or washing machine.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

^ Fit adapter 1 to the sink drain outlet

using nut 2.

If this nut has a flat disc in it you

should take the disc out first.

^ Attach the end of hose 4 to adapter

^ Use a screwdriver to tighten hose

clip 3 up close to the nut.

,^{Non-return valve 5 has to be}

fitted with the arrow pointing in the

direction of flow (i.e. towards the

sink). Otherwise water will not drain

out of the appliance.

1 Adapter

^ Fit non-return valve 5 to tumble dryer

drain hose 6 (make sure it is fitted in

the correct direction - see arrow on

non-return valve).

2 Nut

3 Hose clip

4 End of the hose

5 Non-return valve

6 Tumble dryer drain hose

^ Secure the non-return valve using

hose clips.

Download from Www.Somanuals.com. All Manuals Search And Download.

Electrical connection

Electrical connection U.K.

Non-rewireable plugs BS 1363

All electrical work should be carried out The fuse cover must be refitted when

by a suitably qualified and competent

person, in strict accordance with

current national and local safety

regulations (BS 7671 in the UK).

changing the fuse, and if the fuse cover

is lost, the plug must not be used until a

suitable replacement is obtained. The

colour of the correct replacement cover

is that of the coloured insert in the base

of the plug, or the colour that is

Ensure power is not supplied to the

appliance until after installation work

has been carried out.

embossed in words on the base of the

plug (as applicable to the design of

plug fitted).

The appliance is supplied with a mains

cable with moulded plug ready for

connection to a 230-240V mains

supply. Please ensure the connection

data quoted on the data plate match

the household mains supply.

Replacement fuses should be ASTA

approved to BS 1362 and have the

correct rating. Replacement fuses and

fuse covers may be purchased from

your local electrical supplier.

Connection should be made via a

suitable switched socket which is easily

accessible after installation.

WARNING: THIS APPLIANCE

MUST BE EARTHED

For extra safety it is advisable to protect

the appliance with a suitable residual

current device (RCD). Contact a

qualified electrician for advice.

Do not connect via an extension lead.

Extension leads do not guarantee the

required safety of the appliance (e.g.

danger of overheating).

Download from Www.Somanuals.com. All Manuals Search And Download.

Consumption data

Load

Final spin speed

in a domestic

Residual

moisture

Energy Duration

washing machine

rpm

kWh

2.00

min.

112

Cottons Normal

7.0

1000

7.0

7,0

1200

1400

1600

1800

1.80

1.70

1.65

1.50

102

Cottons Normal

+ Gentle tumble

7.0

1000

2.10

1.55

129

Cottons Hand iron

7.0

1200

1400

1600

1800

1.35

1.25

1.20

1.05

Minimum iron Normal

3.5

1200

0.70

Minimum iron Normal

+ Gentle tumble

3.5

5.0

2.0

2.5

3.0

3.5

1200

800

0.70

0.60

1.45

0.75

0.70

1.55

1.25

Minimum iron Hand iron

Automatic plus Normal

Shirts Normal

600

Delicates Normal

Denim Normal

700

900

Express Normal

1000

Weight of dry laundry

EN 61121:2005 test programme

All data was calculated using EN 61121:2005 unless otherwise stated.

Notes for test institutes:

Before testing in accordance with EN 61121, dry a 3 kg load of cotton laundry with 70% residual

moisture as per the above standard using the Cottons Normal programme without any extra options.

Consumption data can vary from the nominal values given above depending on the size of the

load, types of textiles, residual moisture levels after spinning, fluctuations in the electricity

supply and any extra options selected.

Download from Www.Somanuals.com. All Manuals Search And Download.

Technical data

Height

850 mm

595 mm

596 mm

1071 mm

820 mm

600 mm

Yes

Width

Depth

Depth with door open

Height for building under

Width for building under

Depth for building under

Suitable for pushing under a

worktop

Suitable for stacking

Weight

Yes

69 kg

Drum volume

111 l

Maximum capacity

7 kg dry weight

approx. 4.2 l

Capacity of condensed water

container

Drain hose length

1.5 m

4 m

Maximum delivery head

Maximum drain hose length

Length of connection cable

Voltage

2 m

Connected load

Fuse rating

See data plate

Lamp wattage

Test certificates awarded

Type of refrigerant

Maximum quantity of refrigerant

Energy consumption

R134a

480 g

see "Consumption data"

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming functions

Altering the residual moisture

level in the Cottons

programme

A number to show which option is

selected will appear in the display

alternating with the letter P.

The tumble dryer is designed to dry

effectively using as little energy as

possible.

0 Increased residual moisture.

Laundry damper.

Standard residual moisture

(factory default setting)

(the Automatic plus indicator light will

also flash once).

However, if you require the laundry to

be drier or damper, you can reduce

or increase the default residual

moisture in the Cottons programme.

2 Reduced residual moisture.

Laundry drier.

Follow steps (A,B,C ...) to

programme and store in memory.

(the Automatic plus indicator light will

also flash twice).

Before you begin, ensure that:

– The tumble dryer is switched off.

– The door is closed.

DPressing the Start/Stop button

switches between the options.

ESwitch the dryer off.

APress the Start/Stop button and keep

it pressed in whilst carrying out steps

B-C.

The setting you have selected is now

stored in memory. You can change it

again at any time.

BSwitch the dryer on.

Wait until the Start/Stop button lights up

To check the setting:

constantly . . .

^ Carry out steps A to C.

^ Switch the dryer off after step C.

C. . . and then release the Start/Stop

button.

– The Gentle tumble indicator light will

flash once briefly.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming functions

Altering the residual moisture

level in the Minimum iron

programme

A number to show which option is

selected will appear in the display

alternating with the letter P.

The tumble dryer is designed to dry

effectively using as little energy as

possible.

0 Increased residual moisture.

Laundry damper.

Standard residual moisture

(factory default setting)

(the Automatic plus indicator light will

also flash once).

However, if you require the laundry to

be drier or damper, you can reduce

or increase the default residual

moisture in the Minimum iron

programme.

2 Reduced residual moisture.

Laundry drier.

Follow steps (A,B,C ...) to

programme and store in memory.

(the Automatic plus indicator light will

also flash twice).

Before you begin, ensure that:

– The tumble dryer is switched off.

– The door is closed.

EPressing the Start/Stop button

switches between the options.

FSwitch the dryer off.

APress the Start/Stop button and keep

it pressed in whilst carrying out steps

B-C.

The setting you have selected is now

stored in memory. You can change it

again at any time.

BSwitch the dryer on.

To check the setting:

Wait until the Start/Stop button lights up

^ Carry out steps A to D.

^ Switch the dryer off after step D.

constantly . . .

C. . . and then release the Start/Stop

button.

DPress the Gentle tumble button once.

– The Gentle tumble indicator light will

flash twice briefly.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming functions

Anti-crease

A number to show which option is

selected will appear in the display

alternating with the letter P.

Anti-crease helps prevent creasing, if

laundry is not normally removed im-

mediately after the end of a

programme.

0 Anti-crease off

1 hour anti-crease

The anti-crease function

(the Automatic plus indicator light will

also flash once).

– is activated when the tumble dryer is

delivered. You can shorten the

duration of the anti-crease phase or

deactivate it if wished.

2 2 hours anti-crease

(factory default setting)

(the Automatic plus indicator light will

also flash twice).

– is used in all programmes except

Wollens.

EPressing the Start/Stop button

switches between the options.

– should be left activated.

FSwitch the dryer off.

Follow steps (A,B,C ...) to

programme and store in memory.

The setting you have selected is now

stored in memory. You can change it

again at any time.

Before you begin, ensure that:

– The tumble dryer is switched off.

– The door is closed.

To check the setting:

APress the Start/Stop button and keep ^ Carry out steps A to D.

it pressed in whilst carrying out steps

^ Switch the dryer off after step D.

B-C.

BSwitch the dryer on.

Wait until the Start/Stop button lights up

constantly . . .

C. . . and then release the Start/Stop

button.

DPress the Gentle tumble button

twice.

– The Gentle tumble indicator light will

flash 3 times briefly.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming functions

Altering the volume of the

buzzer

A number to show which option is

selected will appear in the display

alternating with the letter P.

The buzzer has two volumes.

0 Normal buzzer

Follow steps (A,B,C ...) to

programme and store in memory.

(factory default setting)

Loud buzzer

Before you begin, ensure that:

– The tumble dryer is switched off.

– The door is closed.

(the Automatic plus indicator light will

also flash)

EPressing the Start/Stop button

switches between the options.

APress the Start/Stop button and keep

it pressed in whilst carrying out steps

B-C.

FSwitch the dryer off.

The setting you have selected is now

stored in memory. You can change it

again at any time.

BSwitch the dryer on.

Wait until the Start/Stop button lights up

constantly . . .

To check the setting:

C. . . and then release the Start/Stop

button.

^ Carry out steps A to D.

^ Switch the dryer off after step D.

DPress the Gentle tumble button three

times.

– The Gentle tumble indicator light will

flash four times briefly.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming functions

Altering the residual moisture

level in the Automatic plus

programme

A number to show which option is

selected will appear in the display

alternating with the letter P.

The tumble dryer is designed to dry

effectively using as little energy as

possible.

0 Increased residual moisture.

Laundry damper.

Standard residual moisture

(factory default setting)

(the Automatic plus indicator light will

also flash once).

However, if you require the laundry to

be drier or damper, you can reduce

or increase the default residual

moisture in the Automatic plus

programme.

2 Reduced residual moisture.

Laundry drier.

Follow steps (A,B,C ...) to

programme and store in memory.

(the Automatic plus indicator light will

also flash twice).

Before you begin, ensure that:

– The tumble dryer is switched off.

– The door is closed.

EPressing the Start/Stop button

switches between the options.

FSwitch the dryer off.

APress the Start/Stop button and keep

it pressed in whilst carrying out steps

B-C.

The setting you have selected is now

stored in memory. You can change it

again at any time.

BSwitch the dryer on.

To check the setting:

Wait until the Start/Stop button lights up

^ Carry out steps A to D.

^ Switch the dryer off after step D.

constantly . . .

C. . . and then release the Start/Stop

button.

DPress the Gentle tumble button four

times.

– The Gentle tumble indicator light will

flash six times briefly.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming functions

Standby

Factory default setting: Not in

current programme

To save energy, the display and the

programme sequence/check lights

go out after 10 minutes and the

Start/Stop button starts flashing

slowly.

As described under "On" above.

However, the display and programme

sequence/check lights will stay on after

the programme has started and remain

visible during the programme.

To come out of standby mode

Off

^ Turn the programme selector or

press a button. Neither will have any

effect if a programme is running.

The display and programme

sequence/check lights will stay on while

the dryer is switched on.

The standby function is activated and

the display and programme

sequence/check lights will go out after

10 minutes:

Follow steps (A,B,C ...) to

programme and store in memory.

^ See next page.

– if a programme is not selected after

the dryer has been switched on.

– after a programme has started.

They will, however, come on for 10

minutes after a delay start time has

counted down, at the end of the

programme or the end of the

anti-crease phase.

The buzzer (if selected ) will sound for

10 minutes at the end of the

programme.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming functions

Before you begin, ensure that:

– The tumble dryer is switched off.

– The door is closed.

A number to show which option is

selected will appear in the display

alternating with the letter P.

APress the Start/Stop button and keep

it pressed in whilst carrying out steps

B-C.

0 On

Not in current programme

(factory default setting)

(the Automatic plus indicator light will

also flash once).

BSwitch the dryer on.

Wait until the Start/Stop button lights up

constantly . . .

2 Off

(the Automatic plus indicator light will

C. . . and then release the Start/Stop

button.

also flash twice).

EPressing the Start/Stop button

switches between the options.

DPress the Gentle tumble button five

times.

FSwitch the dryer off.

– The Gentle tumble indicator light will

flash 8 times briefly.

The setting you have selected is now

stored in memory. You can change it

again at any time.

To check the setting:

^ Carry out steps A to D.

^ Switch the dryer off after step D.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming functions

Memory function

A number to show which option is

selected will appear in the display

alternating with the letter P.

The electronics will memorise any

extra options selected for a

programme. The duration selected

for the Warm air or Cool air timed

drying programmes will also be

stored in memory.

0 Memory deactivated

(factory default setting)

Memory activated

These settings will be selected

automatically the next time the

programme is chosen. You can either

accept these or change them by

pressing the appropriate button.

(the Automatic plus indicator light will

also flash)

EPressing the Start/Stop button

switches between the options.

FSwitch the dryer off.

Follow steps (A,B,C ...) to

programme and store in memory.

The setting you have selected is now

stored in memory. You can change it

again at any time.

Before you begin, ensure that:

– The tumble dryer is switched off.

– The door is closed.

To check the setting:

^ Carry out steps A to D.

^ Switch the dryer off after step D.

APress the Start/Stop button and keep

it pressed in whilst carrying out steps

B-C.

BSwitch the dryer on.

Wait until the Start/Stop button lights up

constantly . . .

C. . . and then release the Start/Stop

button.

DPress the Gentle tumble button six

times.

– The Gentle tumble indicator light will

flash 9 times briefly.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming functions

Keypad tone

A number to show which option is

selected will appear in the display

alternating with the letter P.

An audible tone sounds each time a

button is pressed.

Follow steps (A,B,C ...) to

programme and store in memory.

0 Keypad tone deactivated

(factory default setting)

Before you begin, ensure that:

– The tumble dryer is switched off.

– The door is closed.

Keypad tone activated

(the Automatic plus indicator light will

also flash)

EPressing the Start/Stop button

switches between the options.

APress the Start/Stop button and keep

it pressed in whilst carrying out steps

B-C.

FSwitch the dryer off.

The setting you have selected is now

stored in memory. You can change it

BSwitch the dryer on.

Wait until the Start/Stop button lights up again at any time.

constantly . . .

To check the setting:

C. . . and then release the Start/Stop

button.

^ Carry out steps A to D.

DPress the Gentle tumble button

seven times.

^ Switch the dryer off after step D.

– The Gentle tumble indicator light will

flash on and off slowly once and then

on and off quickly once.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming functions

Adjusting the dryer's

– The Gentle tumble indicator light will

flash on and off slowly once and then

on and off quickly twice.

electronics for very soft water

,^{In some areas of the UK, water is}

extremely soft which can affect the

sensitivity of the control electronics.

If the dryer is installed in an area of

very soft water, you should contact

your local water supplier for

A number to show which option is

selected will appear in the display

alternating with the letter P.

0 Factory default setting

information and advice regarding

water hardness and water

Adjusted for very soft water

(the Automatic plus indicator light will

also flash)

conductivity. If the water

conductivity is less than 150 µS, the

following programmable function will

need to be activated.

EPressing the Start/Stop button

switches between the options.

FSwitch the dryer off.

Important. This programmable function

should not be activated if, despite the

water being extremely soft (as would be

the case if a water softener were used),

its conductivity is greater than 150 µS.

The setting you have selected is now

stored in memory. You can change it

again at any time.

To check the setting:

Follow steps (A,B,C ...) to

programme and store in memory.

^ Carry out steps A to D.

^ Switch the dryer off after step D.

Before you begin, ensure that:

– The tumble dryer is switched off.

– The door is closed.

APress the Start/Stop button and keep

it pressed in whilst carrying out steps

B-C.

BSwitch the dryer on.

Wait until the Start/Stop button lights up

constantly . . .

C. . . and then release the Start/Stop

button.

DPress the Gentle tumble button eight

times.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming functions

Extending the range of the

drying levels

A number to show which option is

selected will appear in the display

alternating with the letter P.

You can extend the range of the

drying levels for many of the

programmes:

0 Factory default setting

Machine iron+

Drying level range extended

(The Automatic plus indicator light

will also flash).

(drier than Machine iron).

Slightly dry

(drier than Hand iron).

Normal+

EPressing the Start/Stop button

switches between the options.

(drier than Normal).

FSwitch the dryer off.

This programmable function is only

available for programmes with drying

levels.

The setting you have selected is now

stored in memory. You can change it

again at any time.

Follow steps (A,B,C ...) to

programme and store in memory.

To check the setting:

Before you begin, ensure that:

– The tumble dryer is switched off.

– The door is closed.

^ Carry out steps A to D.

^ Switch the dryer off after step D.

To select the extended drying level

APress the Start/Stop button and keep

it pressed in whilst carrying out steps

B-C.

^ Select a programme.

^ Press the drying level button

repeatedly until one or two indicator

lights come on.

BSwitch the dryer on.

Wait until the Start/Stop button lights up

– Indicator lights Extra dry and Normal

constantly . . .

= Normal+

C. . . and then release the Start/Stop

button.

– Indicator lights Normal and Hand

iron = Slightly dry

DPress the Gentle tumble button nine

times.

– Indicator lights Hand iron and

Machine iron = Machine iron+

– The Gentle tumble indicator light will

flash on and off slowly once and then

on and off quickly three times.

Download from Www.Somanuals.com. All Manuals Search And Download.

Alteration rights reserved/1212

M.-Nr. 09 263 310 / 01

Download from Www.Somanuals.com. All Manuals Search And Download.

Milton Bradley Board Games Toy Story 3 User Manual
Nady Systems Speaker System PFW12 User Manual
Olympus Camcorder 227670 User Manual
Onkyo Speaker SKW 770 User Manual
Onkyo Stereo Amplifier A 9377 User Manual
Onkyo Stereo System HT S7300 User Manual
Oregon Scientific Clock Radio RM822 UK VERSION RM823 User Manual
Panasonic All in One Printer DP C262 User Manual
Panasonic Credit Card Machine GN SERIES User Manual
Panasonic Vacuum Cleaner MC CL310 User Manual