OWNER’S MANUAL
Please read this manual thoroughly
and retain it for future reference.
S4 MidiLand
4060/ 4060M
SELF-POWERED MULTIMEDIA
SPEAKER SYSTEM
OWNER’S RECORD
S4 MidiLand™ 4060
SERIAL #
The model and serial numbers are located on
the back of the subwoofer. Record the serial
number in the space above for future reference.
© 2000 By MidiLand, Inc. All Rights Reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
Check your S4 MidiLand™ 4060 packaging for the following items:
1
• Two (2) Satellite Speakers.
• One (1) Subwoofer with integrated 60W RMS power amplifier.
• One (1) CM-4 Control Module.
• One (1) 10 Feet, 15-Pin to 15-Pin Interface Cable (subwoofer to CM-4 control module).
• Two (2) 6 Feet and 8 inches, high performance Wire Speaker Cables.
• One (1) 4 Feet, Audio Cable w/ 3.5mm to 3.5mm stereo male connectors.
• One (1) 2’ 15-pin to 15-pin flat Ribbon Cable with separate metal Slot Cover.
• Eight (8) non-marring, self-adhesive Rubber Feet.
• Two (2) 4” self-adhesive control module Mounting Strips.
• Four (4) Self-threading Screws for internal mounting of control module.
• One (1) AC Power Adapter
Your packaging may also contain other printed material with special offers for direct purchase of related multimedia products as well as optional MidiLand™
accessories.
2
Prepare the area where you will be installing your multimedia system.
Following are some tips you might want to consider:
• Select a location for the satellite speakers which is solid and places them an appropriate distance apart for good
stereo imaging (2-3’ apart if using on a desktop with your multimedia computer, personal stereo or mini-bookshelf
audio system; at least 3-4’ apart if using fairly close to a television set with your set top video game and at least 6’-
8” apart if using them in a home theater or traditional audio setup (i.e., when listening from across the room).
• Featuring a dual angle elipsoidal design, the satellite speakers may be used in either of two (2) “tilt” angles simply by
turning the unit “upside-down”. The angle can be 15° or 25° to help raise the stereo image and improve focus and
clarity. The satellite speakers may also be wall mounted with optional bracket available separately from your dealer.
• Select a solid location for the subwoofer (generally on the floor) which allows adequate ventilation for the 60W RMS
Integrated Amplifier mounted in the rear of the subwoofer enclosure. To enhance bass performance, it is generally
advisable to place the subwoofer next to a wall or solid piece of furniture with the woofer/grille side pointing away from
the wall or furniture. You’ll probably want to experiment with several different locations once you’ve completed the
installation and hookup. Place 4 Rubber Feet under subwoofer to protect the mounting surface, if necessary.
• If you choose to mount the control module internal to a computer, refer to illustration I-2. However, if you
choose to mount the control module externally (i.e. the underside of your desktop, underneath your monitor, on top
of your desktop, etc.), we have supplied self-adhesive mounting strips or 4 Rubber Feet to secure/place the controls
wherever it is most convenient.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
• 60 WATT RMS INTEGRATED POWER AMPLIFIER
• 6½” (165mm) SUBWOOFER
• SMALL DESKTOP “FOOTPRINT”
• DYNAMIC SOUND QUALITY
• 2½” (65mm) WIDEBAND SATELLITE SPEAKERS
• INTERNAL/EXTERNAL REMOTE CONTROL MODULE
• COMPLETE MAGNETIC/VIDEO SHIELDING
• EXTERNAL LOW-NOISE AC ADAPTER
• PATENT PENDING CM-4 INTERFACE
CONNECTIONS
With the power switch in the off position and the AC adapter plug not connected,
refer to the instructions and illustrations below.
3
Locate the 10’ 15-pin to 15-pin interface cable, plug one end into the 15-pin CM-4 interface connector of the
subwoofer’s amplifier located at the rear of the subwoofer unit and the other end to rear of the CM-4 control
module. If you have chosen to mount the control module internal to a computer, than you must locate the 2’ 15-
pin to 15-pin ribbon cable and refer to illustration I-2.
•
Using the supplied RCA speaker cable connect the left and right satellite speakers to the subwoofer amplifier’s
output. The connection terminals are simple plug-in type, needing only to be concerned with connecting the Left
output to the Left speaker and vice-versa. Refer to illustration I-1.
•
•
In the package please locate a, 4 feet, stereo 3.5mm plug to stereo 3.5mm plug audio cable. This cable is
intended to be connected to a computer’s sound card, a portable CD player, or wherever a source with a 3.5mm
jack is required. If another type of connector is required, your MidiLand dealer should have whatever adapter you
may need. Using this cable, simply plug one end of the 3.5mm audio cable into the source’s output jack and
connect the other end of the 3.5mm plugs into the amplifier’s input. Refer to illustration I-1.
Power is supplied to the S4 MidiLand™ 4060 via a supplied external AC adapter. The correct voltage adapter is
supplied for the territory you purchased the unit in. First, make sure the on/off MidiLand logo, on the subwoofer’s
front panel, is set to off which the logo is not “ILLUMINATED”. Second, connect the coaxial power plug into the
labeled power receptacle on the rear of the subwoofer. Third, connect the country specific corded plug into an
approved and properly functioning AC wall outlet. DO NOT use an extension cord or an overly crowded wall plate.
•
4
Download from Www.Somanuals.com. All Manuals Search And Download.
AAPPPPLLIICCAATTIIOONNSS
Illustration I-1
SUBWOOFER-REAR VIEW
Keyboard/MIDI/Mixer/PA
Computer/Sound Card
Audio Cable
(supplied)
Interface Cable
LLOOUUDDSSPPEEAAKKEERR
SSYYSSTTEEMM
3c
REMOTE CONTROL
S4 BUS
3a
Portable stereo
OUTPUT
CD/Laser Disc/VCR/TV/DVD
S4 Midnd 4060 Speaker System
POWER IN
S/N:
MIDAND,INC.
SEE INSCTION MANUAL
Video Games
3b
3b
AC adapter
Illustration I-2
CONTROL MODULE
INTERNAL MOUNTING
* Please note that the
control module may not
fit into all computers.
You may need to pur-
chase “rails” or other
adapters from the maker
of your computer.
*TYPICAL COMPUTER
SELF-THREADING
SCREWS
SLOT COVER
CONTROL MODULE
RIBBON CABLE
5
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE
After verifying that everything has been connected properly, plug the power cord into an available AC wall outlet.
On the control module, set the controls as follows:
4
• Rotate the Volume control fully couterclockwise.
• Press the 3D and Mute buttons so that they are in the out position, not “engaged”.
• Turn the Bass, Treble, and Balance to the center detent position, “12 o’clock”.
Power switch
1. Push the S4 logo power switch located on the front
the subwoofer.
2. The S4 MidiLand logo LED should illuminate.
To start making music, adjust the controls as follows:
5
•
•
•
•
•
Start your music, CD-ROM, movie, or other sound source playing and turn up its output level, if available.
Rotate the Volume control clockwise to the desired listening level.
Adjust the Balance control left and right to audibly check your connections.
Rotate the Bass and Treble left and right. You should noticably hear an increase or decrease in tone.
For private listening, use the headphone jack locacted on the CM-4 control module.
Make sure to experiment with all of the controls to customize the sound just the way you like it. If you have any
questions, look to our troubleshooting section.
•
•
For further support e-mail us at tech@midiland.com or call Customer Service at (888) 592-1168.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
TROUBLESHOOTING
PROBLEM
POSSIBLE SOLUTION
Verify that the system is plugged into wall outlet and that the connection is secure.
Make sure that the amplifiers power “S4 MidiLand” logo is pushed and that the green
CM-4 LED and the S4 MidiLand logo is illuminated.
Turn the volume on the control module up.
Turn the output level from your sound source up.
Verify that your source is working properly.
No sound at all
Check that the balance control is centered and that input connections are ok.
Only one channel is working
Make sure that there are no loose speaker cable connections. The speaker cable plug
must be firmly seated in the proper jack on the rear side of the satellite and amplifier.
For further information or support, e-mail us at tech@midiland.com or call Customer Service at (888)592-1168.
WARRANTY
Three Years Limited Warranty
MidiLand, Inc. warrants to the end user that all of its computer speakers are free from defects in
materials and workmanship in the course of normal and reasonable use for a term of three (3) years
from the date of purchase.
This warranty is the exclusive and only warranty in effect relative to MidiLand, Inc. computer
speaker systems and any other warranties, either expressed or implied, are invalid. Neither MidiLand
Inc., nor any authorized MidiLand, Inc. reseller is responsible for any incidental damages incurred in
the use of the speakers. (This limitation of incidental or consequential damage is not applicable
where prohibited).
MidiLand, Inc. obligation under this warranty does not apply to any defect, malfunction or failure
as a result of misuse, abuse, improper installation, use with faulty or improper equipment of the use
of the computer speaker systems with any equipment for which they are not intended.
The terms of this warranty apply only to computer speaker systems when such speakers are re-
turned to the respective authorized MidiLand, Inc. reseller where they were purchased. Under the
terms of the warranty the original consumer purchaser has certain legal rights and may have other
rights which vary worldwide.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
SPECIFICATIONS
SYSTEM TYPE:
Self-Powered Multimedia Satellite/Subwoofer Loudspeaker System
SYSTEM COMPONENTS:
6½" (165mm) Subwoofer (contains Integrated Power Amplifier)
2½" (65mm) Wideband Satellites (two)
CM-4 Control Module
Connecting Cables
OVERALL ACOUSTIC
FREQUENCY RESPONSE:
20 Hz to 20 kHz (+/- 3dB @ 1 Watt/1 Meter)
AMPLIFIER TYPE/
DESIGN FEATURES:
Class A/B Hybrid-Monolithic Design, Proprietary CM-4 Interface, UL 94V-0 Spec Printed Circuit
Boards, Redundant Protection Circuits (Thermal, Short-Circuit, Under/Over Voltage), Gold-Plated
Outputs, and Mute/Power Circuits
AMPLIFIER POWER:
INPUT IMPEDANCE:
MAXIMUM INPUT:
INPUTS:
60 Watts RMS (l x 30 Watt, 2 x 15 Watt) 20 Hz to 20 kHz
> 50k Ohms
8V (peak-to-peak, before input clipping)
Low Level via 3.5mm Stereo Jack
OUTPUTS:
Left and Right Satellite Speakers via Gold-Plated, RCA Jacks
SUBWOOFER:
165mm Poly Laminated Paper Cone with 25mm OFC Voice Coil on TSV Composite Former,
Shielded Magnet Structure
SUBWOOFER ENCLOSURE:
(8.7"W x 13.4"H x 12.2"D)
Rigidly-braced MDF (Wood), Computer-Optimized Front-Firing Vented Design
with Turbulence-Free Port and Non-Removable Fabric Grille
SATELLITE SPEAKERS:
65mm Computer-Optimized Wideband Paper Cone Drivers,
Speaker Magnet Structures (inherent magnetic shielding)
SATELLITE ENCLOSURES:
(3.3"W x 3.9"H x 4.2"D)
Two-Piece Molded, Dual-Slope Ellipsoidal Acoustic Suspension Design,
Embedded ¼"-20 Threaded Inserts (for optional mounting brackets) and decorative cloth grilles
CROSSOVER FREQUENCY:
180 Hz
CONTROL MODULE:
(5.8"W x 1.7"H x 3.1"D)
Patent-Pending S4Bus™ Interface to Integrated Power Amplifier for control of Major System
Functions—Volume, Balance, Bass, Treble, 3D, Mute, Headphone jack
Note
Design and specifications are subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
|