CWT Series
Users Manual
Version 2.2
Download from Www.Somanuals.com. All Manuals Search And Download.
CWT Series
MICROBOARDS TECHNOLOGY, LLC
TABLE OF CONTENTS
System Overview..................................................................................................5
Unpacking your system.........................................................................................5
Microboards Statement Regarding Improper Duplication .....................................5
Installation Requirements .....................................................................................6
Main Menu............................................................................................................7
Copy Disc to Disc..................................................................................................7
Copy CD+G ..........................................................................................................7
Simulation Disc to Disc .........................................................................................7
Erasing RW media................................................................................................8
Setup Menu ..........................................................................................................9
Mode Select................................................................................................10
CD WR Speed ............................................................................................10
ISRC Check................................................................................................10
Auto Run.....................................................................................................10
Copy Quantity.............................................................................................10
Session Mode.............................................................................................10
Reader Select.............................................................................................10
Drive Inquiry................................................................................................10
F/W Version................................................................................................10
F/W Update.................................................................................................10
Log..............................................................................................................10
Error Codes ........................................................................................................11
Specifications......................................................................................................17
Supported Formats .............................................................................................17
Firmware Updates...............................................................................................17
Technical Support...............................................................................................17
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CWT Series
MICROBOARDS TECHNOLOGY, LLC
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CWT Series
MICROBOARDS TECHNOLOGY, LLC
System Overview
The CWT Series employs up to 10 General Purpose CD recorders.
An intuitive, menu driven
display and 5-button control
interface provide one-touch
operation for the novice user
COPY START
(DISC to DISC)
while providing advanced
features for the professional.
Advanced Features:
•
•
•
•
•
•
•
Stand-Alone CD-R duplicator
One Touch duplication
Auto Run option
Speed selectable (4x to 48x for CD-R)
Supports writing to CD-R/RW
Copy and Verify
Counter feature allows the user to input how many discs need to be copied and
the keeps track of the total discs completed.
Simulation mode to ensure recording stability
Easy-to-read, two-line display for status and error reporting
Updates easily installed through CD reader
•
•
•
Unpacking your system
When unpacking your duplicator, confirm the following items are included:
•
•
•
•
CWT Series duplicator
Power cable
Quick Start Guide
Starter Kit (includes User’s Manual and Warranty information)
If any of these items are missing, please contact or Microboards Technology Technical Support at
952-556-1639.
IMPORTANT: Please keep all the packing for your CWT Series duplicator. If your unit ever
needs to be sent in for service, it must be returned in the original packing or the warranty will be
voided.
Microboards Statement Regarding Improper Duplication
Microboards Technology fully supports the right of any business, organization, group, or
individual to protect their property from unlicensed, unauthorized, or illegal duplication.
As a user of our equipment, we expect you to support that right as well.
Microboards Technology is neither responsible nor liable for the infringement of any laws
regarding the illegal duplication of property. Microboards Technology products are in no way
intended to encourage or condone such duplication.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CWT Series
MICROBOARDS TECHNOLOGY, LLC
Installation Requirements
System Setup
•
•
Connect the power cable to the CWT Series tower and plug in to a protected power outlet
strip or UPS power supply.
Turn on power to the tower. The system is now ready to use.
Install your CWT Series duplicator in the following environment:
•
•
•
•
•
On a level and stable surface
In a well ventilated location
Temperature and humidity
Temperature: 5-40°
Humidity: 20-80%RH (no dew formation)
Do not install it in the following places:
ƒ
Under direct sunlight (If the machine is exposed to sunlight, the light should be blocked
by a curtain or blind.)
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
A dusty location
A place where there is a lot of vibration
Near open flame
A place where the temperature and humidity change drastically
Near a heating device such as a heater or furnace
A location where air from an air conditioner blows directly onto the unit
Near a container filled with water such as a vase
In winter during times of low humidity or in a location where static electricity is
generated, use an anti-static-electricity mat or humidifier to prevent static electricity.
Power supply
ƒ
ƒ
Use house current as the power source for the unit.
Do not use an outlet near a motor driven appliance (i.e. air conditioner, copying
machine).
ƒ
ƒ
Use an outlet with stable power supply voltages.
Do not overload an outlet. Do not use a service outlet from a PCs or other office
machine.
ƒ
ƒ
ƒ
Wire the power cord properly.
Do not touch the power cord with a wet hand.
Be careful not to damage the power cord.
Inspect the power cord periodically.
In the event that the power cord is damaged, replace the power cord.
Be sure to use a tool such as the screwdriver to change the 115/230V Switch.
Do not use your finger.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CWT Series
MICROBOARDS TECHNOLOGY, LLC
Main Menu
The Arrow buttons (▼▲) allow you to move forward or backward in the menu without selecting
the current menu item. The NO button will move you to the next menu item. YES will select the
current menu item.
YES
ANALYZING MASTER
COPY
15:26
20%
COPY START?
(DISCtoDISC)
CD-DA
NO,▼
YES
ANALYZING MASTER
COPY
15:26
20%
COPY CD+G START?
(DISCtoDISC)
CD-DA
NO,▼
YES
SIMULATION?
(DISCtoDISC)
ANALYZING MASTER
>QUICK ERASE?
SIMULATION 15:26
CD-DA
20%
ESC
ESC
NO,▼
YES
YES
YES
DISC ERASE?
(REWRITABLE)
SURE ?
DISC ERASE
Please wait...
YES
YES
NO,▼
NO,▼
>QUICK ERASE?
SURE ?
DISC ERASE
Please wait...
NO,▼
>EXIT?
NO,▼
YES
SETUP?
SETUP MENU
(see pg 9)
(MODE CHANGE)
NO/ESC
Copy Disc to Disc
1. Place the Master Disc into the Reader drive.
Place the blank disc(s) into the Recorder drive(s) and wait for the light(s) on the front of
the Recorder(s) to stop blinking.
Copy Start?
(DISC to DISC)
2. The display reads COPY START? (DISC to DISC).
3. Press YES. If you have the Auto Run feature set to ON, the duplication will begin when
the master is loaded and all drives are loaded with blank media.
4. The drive trays will open on any recorder without blank discs installed. If you do not want
to make a copy in those drives, close the tray(s), wait for the drive light to go out, and
then press the YES button to start the copy job.
5. The display will now show the progress of the Copy Job.
COPY
CD
425.0MB
25%
6. The Recorder(s) will eject the recorded discs when the job is complete.
Copy CD+G
Use this menu to copy CD+G discs.
Follow the steps listed in the Copy Disc to Disc section above.
Simulation Disc to Disc
1. At the COPY START? (DISC to DISC) menu, press the NO or ▼ button until the display
shows SIMULATION? (DISC to DISC).
SIMULATION??
(DISC to DISC)
2. Place the Master Disc into the Reader drive
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CWT Series
MICROBOARDS TECHNOLOGY, LLC
3. Place the blank disc(s) into the Recorder drive(s) and wait 10 seconds for the light(s) on
the front of the Recorder(s) to stop blinking.
4. Press YES.
5. The drive trays will open on any recorder without blank discs installed. If you do not want
to make a copy in those drives, close the tray(s), wait for the drive light to go out, and
then press the YES button to start the copy job.
6. The display will now show the progress of the Simulation Copy Job
SIMULATION
CD
425.0MB
25%
7. The Recorder(s) will eject the still-blank discs when the job is complete.
Erasing RW media
1. At the COPY START? (DISC to DISC) menu, press the NO or ▼ button until the display
shows DISC ERASE? (REWRITABLE):
DISC ERASE?
(REWRITABLE)
2. Load the Recorder(s) with the CD-RW media you wish to erase. You can erase one disc
at a time or fill all the Recorders to erase multiple discs at once. All discs loaded must be
of the same type.
3. Press the YES button
4. The next screen asks if you want to perform a Quick Erase.
QUICK ERASE?
If you wish to perform a Full Erase, press the NO button.
FULL ERASE?
Pressing the YES button at either of these selections will show the following screen:
SURE?
5. Press the YES button if you are sure you want to erase the RW disc. If you do not wish
to erase the disc, press the NO button and you will go back to the DISC ERASE screen
(step 1).
6. The screen will now show:
DISC ERASE
7. Once the erasing is complete, the Recorder(s) will eject the disc(s).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CWT Series
MICROBOARDS TECHNOLOGY, LLC
Setup Menu
Yes
Yes
Yes
SETUP
MODE SELECT?
(COPY MODE)
COPY?
(DISC to DISC)
VERIFY?
(DISC to DISC)
COPY + V?
(DISC to DISC)
EXIT?
COPY?
CD WR SPEED?
(MAX)
MAX?
48X?
4X?
EXIT?
MAX?
ISRC CHECK?
(OFF)
ISRC ON?
ON?
ISRC OFF?
OFF?
EXIT?
ISRC ON?
Yes
Yes
Auto Run?
(OFF)
Yes
COPY QUANTITY?
(xxxx/xxxx)
COPY QUANTITY?
0---
Yes
Session Mode?
(AUTO)
AUTO?
CLOSE?
OPEN?
EXIT?
AUTO?
Yes
Reader Select?
(DRIVExx)
DRIVE01
READER
THE DISPLAY WILL CYCLE
THROUGH THE MAKE, MODEL,
AND FIRMWARE OF THE
SELECTED DRIVE UNTIL YOU
PRESS A BUTTON.
DRIVE02
RECORDER
DRIVExx
RECORDER
DRIVE01
READER
EXIT?
Yes
DRIVE INQUIRY?
DRIVE01
READER
THE DISPLAY WILL CYCLE
THROUGH THE MAKE, MODEL,
AND FIRMWARE OF THE
SELECTED DRIVE UNTIL YOU
PRESS A BUTTON.
DRIVE02
RECORDER
DRIVExx
RECORDER
EXIT?
DRIVE01
READER
F/W VERSION
F/W UPDATE
Premium 1020
VER A.BC
H/W INFO
12ΦπρΨ
EXIT?
Premium 1020
VER A.BC
Yes
Yes
Yes
INSERT
PROGRAM DISC
Checking
UPDATE?
Updating
Complete
VER a.bc -> b.cd
LOG?
EXIT?
OK xxxxxxx
NG xxxxxxx
KEY
Yes
Caption indicates button to press
No caption indicates display sequence
▲ (Back), NO, or ▼ (Forward)
MODE SELECT?
(COPY MODE)
YES (Accept) or ESC (Return to Menu)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
CWT Series
MICROBOARDS TECHNOLOGY, LLC
Setup Menu
1. At the COPY START? (DISC to DISC) menu, press the NO or ▼ button until the display
shows SETUP? (MODE CHANGE)
SETUP?
(MODE CHANGE)
2. Press the YES button
3. The first setup option is Mode Select, followed by Write Speeds, ISRC Check, Copy
Quantity, Session Mode, Drive Inquiry, Firmware Version and Exit.
4. Pressing the NO or ▼ button will allow you to move from menu to menu.
5. Pressing the YES button will allow you to view or change the configuration of the system.
6. Please follow the flow chart on page 9 to navigate through the different menus.
Here is a description of each setup menu item:
Mode Select
COPY - Duplication from master disc to blank disc.
VERIFY - It compares a copied disc with the master disc.
COPY+V - Copying in the COPY+VERIFY mode
CD WR Speed
Available speeds range from 52x down to 4x.
ISRC Check
Default setting is ON. This feature will copy the ISRC codes from the Master audio disc to the
blank discs.
Auto Run
Default setting is OFF. When set to ON, this allows the duplicator to start the duplication process
when all recorders are loaded with blank media. The master must also be loaded before
duplication will begin.
>>COPY QUANTITY
Copy Quantity
Set up the number of disc you want to copy.
0750
Use the ▼▲buttons to change the number in the current column up or down. YES will move you
one column to the right, NO will move you 1 column to the left. Press YES when in the right
column to save the number of copies entered. The example above shows that 750 copies have
been entered with the cursor currently in the right column (underlined).
Session Mode
Select either from AUTO, CLOSE, or OPEN.
AUTO: Make the session of copied disc as same as the master.
CLOSE: Close the session of copied disc.
OPEN: Leave the session of copied disc open.
Reader Select
Changes which drive is selected as the reader. This setting should not be changed.
Drive Inquiry
Displays an inquiry of each drive connected, showing drive model and firmware.
F/W Version
Shows CWT Series firmware version and H/W information.
F/W Update
Used when updating the firmware of the CWT Series duplicator.
Log
Displays the number of successful and unsuccessful discs over the entire life of the duplicator.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
CWT Series
MICROBOARDS TECHNOLOGY, LLC
Error Codes
Read Errors
ASC
00
ASCQ
00
Description
NO ADDITIONAL SENSE INFORMATION
I/O PROCESS TERMINATED, PLAY OPERATION ABORTED
AUDIO PLAY OPERATION IN PROGRESS
AUDIO PLAY OPERATION PAUSE
00
00
00
06
11
12
00
00
00
00
01
13
14
15
17
AUDIO PLAY OPERATION SUCCESSFULLY COMPLETED
AUDIO PLAY OPERATION STOPPED DUE TO ERROR
NO CURRENT AUDIO STATUS TO RETURN
CLEANINF REQUESTED
00
NO INDEX/SECTOR SIGNAL
02
04
04
04
04
04
05
06
08
08
08
08
09
09
09
09
0A
0B
0B
0B
10
11
11
11
11
11
11
12
13
14
14
14
15
15
15
17
17
17
17
17
00
00
01
02
03
07
00
00
00
01
02
03
00
01
02
03
00
00
01
02
00
01
02
05
06
0F
10
00
00
01
05
06
00
01
02
00
01
02
03
04
NO SEEK COMPLETE
LOGICAL UNIT NOT READY, CAUSE NOT REPORTABLE
LOGICAL UNIT IS IN PROCESS OF BECOMING READY
LOGICAL UNIT NOT READY, INITIALIZING CMD. REQUESTED
LOGICAL UNIT NOT READY, MANUAL INTERVENTION REQUIRED
LOGICAL UNIT NOT READY, OPERATION IN PROGRESS
LOGICAL UNIT DOES NOT RESPOND TO SELECTION
NO REFERENCE POSITION FOUND (medium may be upside down)
LOGICAL UNIT COMMUNICATION FAILURE
LOGICAL UNIT COMUUNICATION TIME-OUT
LOGICAL UNIT COMMUNICATION PARITY ERROR
LOGICAL UNIT COMMUNICATION CRC ERROR (ULTRA-DMA/32)
TRACK FOLLOWING ERROR
TRACKING SERVO FAILURE
FOCUS SERVO FAILURE
SPINDLE SERVO FAILURE
ERROR LOG OVERFLOW
WARNING
WARNING-SPECIFIED TEMPERATURE EXCEEDED
WARNING-ENCLOSURE DEGRADED
ID CRC OR ECC ERROR
UNRECOVERED READ ERROR
ERROR TOO LONG TO CORRECT
L-EC UNCORRECTABLE ERROR
CIRC UNRECOVERED ERROR
ERROR READING UPC/EAN NUMBER
ERROR – LOSS PF STREAMING
ADDRESS MARK NOT FOUND FOR ID FIELD
ADDRESS MARK NOT FOUND FOR DATA FIELD
RECORD NOT FOUND
RECORD NOT FOUND – RECOMMEND REASSIGNMENT
RECORD NOT FOUND – DATA AUTO – REALLOCATED
RANDOM POSITIONING ERROR
MECHANICAL POSITIONING ERROR
POSITIONING ERROR DETECTED BY READ OF MEDIUM
RECOVERED DATA WITH NO EEOR CORRECTION APPLIED
RECOVERED DATA WITH RETRIES
RECOVERED DATA WITH POSITIVE HEAD OFFSET
RECOVERED DATA WITH NEGATIVE HEAD OFFSET
RECOVERED DATA WITH RETIES AND/OR CIRC APPLIED
17
05
RECOVERED DATA USING PREVIOUS SECTOR ID
RECOVERED DATA WITH ERROR CORRECTION APPLIED
RECOVERED DATA WITH ERROR CORP. & RETRIES APPLIED
RECOVERED DATA WITH CIRC
RECOVERED DATA WITH L-EC
PARAMETER LIST LENGTH ERROR
18
18
18
18
1A
1B
1E
00
01
03
04
00
00
00
SYNCHRONOUS DATA TRANSFER ERROR
RECOVERED ID WITH ECC CORRECTION
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CWT Series
MICROBOARDS TECHNOLOGY, LLC
20
00
00
00
00
00
01
02
03
04
00
00
01
02
03
04
00
01
02
03
00
00
05
00
00
01
02
03
00
01
02
03
04
00
00
01
02
0F
11
12
13
14
15
16
00
00
01
02
00
01
02
03
NN
00
00
00
00
00
00
00
00
00
00
INVALID COMMAND OPERATION CODE
LOGICAL BLOCK ADDRESS OUT OF RANGE
INVALID FIELD IN CDB
LOGICAL UNIT NOT SUPPORTED
INVALID FIELD IN PARAMETER LIST
PARAMETER NOT SUPPORTED
21
24
25
26
26
26
26
26
28
29
29
29
29
29
2A
2A
2A
2A
2B
2C
2C
2F
30
30
30
30
35
35
35
35
35
39
3A
3A
3A
3B
3B
3B
3B
3B
3B
3B
3D
3E
3E
3E
3F
3F
3F
3F
40
43
44
45
46
47
48
49
4A
4B
4C
PARAMETER VALUE INVALID
THRESHOLD PARAMETERS NOT SUPPORTED
INVALID RELEASE OF ACTIVE PERSISTENT RESERVATION
NOT READY TO READY CHANGE, MEDIUM MAY HAVE CHANGED
POWER ON, RESET, OR BUS DEVICE RESET OCCURRED
POWER ON OCCURRED
SCSI BUS RESET OCCURRED
BUS DEVICE RESET FUNCTION OCCURRED
DEVICE INTERNAL RESET
PARAMETERS CHANGED
MODE PARAMETERS CHANGED
LOG PARAMETERS CHANGED
RESERVATIONS PREEMPTED
COPY CANNOT EXECUSE SINCE HOST CANNOT DISCONNECT
COMMAND SEQUENCE ERROR
PERSISTENT PREVENT CONFLICT
COMMANDS CLEARED BY ANOTHER INITIATOR
INCOMPATIBLE MEDIUM INSTALLED
CANNOT READ MEDIUM - UNKNOWN FORMAT
CANNOT READ MEDIUM – INCOMPATIBLE FORMAT
CLEASNING CARTRIDGE INSTALLED
ENCLOSURE SERVICES FAILURE
UNSUPPORTED ENCLOSURE FUNCTION
ENCLOSURE SERVICES UNAVAILABLE
ENCLOSURE SERVICES TRANSFER FAILURE
ENCLOSURE SERVICES TRANSFER REFUSED
SAVING PARAMETERS NOT SUPPORTED
MEDIUM NOT PRESENT
MEDIUM NOT PRESENT-TRAY CLOSED
MEDIUM NOT PRESENT-TRAY OPEN
END OF MEDIUM REACHED
MEDIUM MAGAZINE NOT ACCESSIBLE
MEDIUM MAGAZINE REMOVED
MEDIUM MAGAZINE INSERTED
MEDIUM MAGAZINE LOCKED
MEDIUM MAGAZINE UNLOCKED
MECHANICAL POSITIONING OR CHANGER ERROR
INVALID BITS IN IDENTIFY MESSAGE
LOGICAL UNIT HAS NOT SELF-CONFIGURED YET
LOGICAL UNIT FAILURE
TIMEOUT ON LOGICAL UNIT
TARGET OPERATING CONDITIONS HAVE CHANGED
MICROCODE HAS BEEN CHANGED
CHANGED OPERATING DEFINITION
INQUIRY DATA HAS CHANGED
DIAGNOSTIC FAILURE ON COMPONENT NN (80H-FFH)
MESSAGE ERROR
INTERNAL TARGET FAILURE
SELECT OR RESELECT FAILURE
UNSUCCESSFUL SOFT RESET
SCSI PARITY ERROR
INITIATOR DETECTED ERROR MESSAGE RECEIVED
INVALID MESSAGE ERROR
COMMAND PHASE ERROR
DATA PHASE ERROR
LOGICAL UNIT FAILED SELF-CONFIGURATION
12
Download from Www.Somanuals.com. All Manuals Search And Download.
CWT Series
MICROBOARDS TECHNOLOGY, LLC
4D
NN
00
00
02
00
00
00
01
00
01
02
03
00
01
FF
00
01
02
03
04
00
01
00
00
00
xx
TAGGED OVERLAPPED COMMANDS (NN=QUEUE TAG)
OVAERLAPPED COMMANDS ATTEMPTED
MEDIA LOAD OR EJECTED FAILED
MEDIUM REMOVAL PREVENTED
SYSTEM RESOURCE FAILURE
UNABLE TO RECOVER TABLE-OF-CONTENTS
OPERATOR REQUEST OR STATE CHANGE INPUT
OPERATOR MEDIUM REMOVAL REQUEST
LOG EXCEPTION
THRESHOLD CONDITION MET
LOG COUNTER AT MAXIMUM
4E
53
53
55
57
5A
5A
5B
5B
5B
5B
5D
5D
5D
5E
5E
5E
5E
5E
63
LOG LIST CODES EXHAUSTED
FAILURE PREDICTION THRESHOLD EXCEEDED - Predicted Logical Unit Failure
FAILURE PREDICTION THRESHOLD EXCEEDED - Predicted Media Failure
FAILURE PREDICTION THRESHOLD EXCEEDED (FALSE)
LOW POWER CONDITION ON
IDLE CONDITION ACTIVATED BY TIMER
STANDBY CONDITION ACTIVATED BY COMMAND
IDLE CONDITION ACTIVATED BY COMMAND
STANDBY CONDITION ACTIVATED BY COMMAND
END OF USER AREA ENCOUNTERED ON THIS TRACK
PACKET DOES NOT FIT IN AVAILABLE SPACE
ILLEGAL MODE FOR THIS TRACK
63
64
65
73
80
VOLTAGE FAULT
CD CONTROL ERROR
VENDOR SPECIFIC
Write Errors
ASC
00
00
00
00
00
00
00
02
04
04
04
04
04
04
04
05
06
08
08
08
08
09
09
09
09
0A
0B
0B
0B
0C
0C
ASCQ
00
06
11
12
13
14
15
00
00
01
02
03
04
07
08
00
00
00
01
02
03
00
01
02
03
00
00
01
02
00
02
Description
NO ADDITIONAL SENSE INFORMATION
I/O PROCESS TERMINATED, PLAY OPERATION ABORTED
AUDIO PLAY OPERATION IN PROGRESS
AUDIO PLAY OPERATION PAUSED
AUDIO PLAY OPERATION SUCCESSFULLY
AUDIO PLAY OPERATION STOPPED DUE TO ERRPOR
NO CURRENT AUDIO STATUS TO RETURN
NO SEEK COMPLETE
LOGICAL UNIT NOT READY, CAUSE NOT REPORTABLE
LOGICAL UNIT IS IN PROCESS OF BECOMING READY
LOGICAL UNIT NOT READY, INITIALIZING CMD. REQUIRED
LOGICAL UNIT NOT READY, MANUAL INTERVENTION REQUIRED
LOGICAL UNIT NOT READY, FORMAT IN PROGRESS
LOGICAL UNIT NOT READY, OPERATION IN PROGRESS
LOGICAL UNIT NOT READY, LONG WRITE IN PROGRESS
LOGICAL UNIT DOES NOT RESPOND TO SELECTION
NO REFERENCE POSITION FOUND
LOGICAL UNIT COMMUNICATION FAILURE
LOGICAL UNIT COMUUNICATION TIME-OUT
LOGICAL UNIT COMMUNICATION PARITY ERROR
LOGICAL UNIT COMMUNICATION CRC ERROR (ULTRA-DMA/32)
TRACK FOLLOWING ERROR
TRACKING SERVO FAILURE
FOCUS SERVO FAILURE
SPINDLE SERVO FAILURE
ERROR LOG OVERFLOW
WARNING
WARNING-SPECIFIED TEMPERATURE EXCEEDED
WARNING-ENCLOSURE DEGRADED
WRITE ERROR
WRITE ERROR-RECOVERED WITH AUTO REALLOCATION
13
Download from Www.Somanuals.com. All Manuals Search And Download.
CWT Series
MICROBOARDS TECHNOLOGY, LLC
0C
03
07
08
09
0A
00
06
00
01
02
00
01
02
03
04
00
01
02
03
04
05
06
07
08
09
00
01
02
03
04
05
06
07
00
01
02
03
00
00
00
01
02
00
00
00
02
00
00
00
01
02
03
04
00
01
02
03
04
05
06
00
00
WRITE ERROR-RECOMMEND REASSIGNMENT
WRITE ERROR-RECOVERY NEEDED
WRITE ERROR-RECOVERY FAILED
WRITE ERROR-LOSS OF STREAMING
WRITE ERROR-PADDING BLOCKS ADDED
UNRECOVERED READ ERROR
CIRC UNRECOVERED ERROR
RANDOM POSITIONING ERROR
MECHANICAL POSITIONING ERROR
POSITIONING ERROR DETECTED BY READ OF MEDIUM
DATA SYNCHRONIZATION MARK ERROR
DATA SYNC ERROR-DATA REWRITTEN
DATA SYNC ERROR-RECOMMEND REWRITE
DATA SYNC ERROR-DATA ATUO-REALLOCATED
DATA SYNC ERROR-RECOMMEND REASSIGNMENT
RECOVERED DATA WITH NO ERROR CORRECTION APPLIED
RECOVERED DATA WITH RETRIES
RECOVERED DATA WITH POSITIVE HEAD OFFSET
RECOVERED DATA WITH NEGATIVE HEAD OFFSET
RECOVERED DATA WITH RETRIES AND/OR CIRC APPLIED
RECOVERED DATA USING PREVIOUS SECTOR ID
RECOVERED DATA WITHOUT ECC - DATA AUTO-REALLOCATED
RECOVERED DATA WITHOUT ECC - RECOMMEND REASSIGNMENT
RECOVERED DATA WITHOUT ECC - RECOMMEND REWRITE
RECOVERED DATA WITHOUT ECC - DATA REWRITTEN
RECOVERED DATA WITH ERROR CORRECTION APPLIED
RECOVERED DATA WITH ERROR CORR. & RETRIES APPLIED
RECOVERED DATA - DATA AUTO-REALLOCATED
RECOVERED DATA WITH CIRC
0C
0C
0C
0C
11
11
15
15
15
16
16
16
16
16
17
17
17
17
17
17
17
17
17
17
18
18
18
18
18
18
18
18
19
19
19
19
1A
1B
1C
1C
1C
1D
20
21
21
24
25
26
26
26
26
26
27
27
27
27
27
27
27
28
29
RECOVERED DATA WITH L-EC
RECOVERED DATA - RECOMMEND REASSIGNMENT
RECOVERED DATA - RECOMMEND REWRITE
RECOVERED DATA WITH ECC - DATA REWRITTEN
DEFECT LIST NOT ERROR
DEFECT LIST NOT AVAILABLE
DEFECT LIST ERROR IN PRIMARY LIST
DEFECT LIST ERROR IN GROWN LIST
PARAMETER LIST LENGTH ERROR
SYNCHRONOUS DATA TRANSFER ERROR
DEFECT LIST NOT FOUND
PRIMARY DEFECT LIST NOT FOUND
GROWN DEFECT LIST NOT FOUND
MISCOMPARE DURING VERIFY OPERATION
INVALID COMMAND OPERATION CODE
LOGICAL BLOCK ADDRESS OUT OF RANGE
INVALID ADDRESS FOR WRITE
INVALID FIELD IN CDB
LOGICAL UNIT NOT SUPPORTED
INVALID FIELD IN PARAMETER LIST
PARAMETER NOT SUPPORTED
PARAMETER VALUE INVALID
THRESHOLD PARAMETERS NOT SUPPORTED
INVALID RELEASE OF ACTIVE PERSISTENT RESERVATION
WRITE PROTECTED
HARDWARE WRITE PROTECTED
LOGICAL UNIT SOFTWARE WRITE PROTECTED
ASSOCIATED WRITE PROTECT
PERSISTENT WRITE PROTECT
PERSISTENT WRITE PROTECT
CONDITIONAL WRITE PROTECT
NOT READY TO READY CHANGE, MEDIUM MAY HAVE CHANGED
POWER ON, RESET, OR BUS DEVICE RESET OCCURRED
14
Download from Www.Somanuals.com. All Manuals Search And Download.
CWT Series
MICROBOARDS TECHNOLOGY, LLC
29
01
02
03
04
00
01
02
03
00
00
00
00
00
01
00
03
04
05
00
00
00
01
02
05
06
08
09
00
01
00
01
00
01
02
03
04
00
00
00
01
02
00
00
01
02
00
01
02
03
NN
00
00
00
00
00
00
00
00
00
00
NN
00
POWER ON OCCURRED
SCSI BUS RESET OCCURRED
BUS DEVICE RESET FUNCTION OCCURRED
DEVICE INTERNAL RESET
PARAMETERS CHANGED
MODE PARAMETERS CHANGED
LOG PARAMETERS CHANGED
RESERVATIONS PREEMPTED
COPY CANNOT EXECUSE SINCE HOST CANNOT DISCONNECT
COMMAND SEQUENCE ERROR
NOT READY TO READY CHANGE, MEDIUM MAY HAVE CHANGED
POWER ON, RESET, OR BUS DEVICE RESET OCCURRED
PARAMETERS CHANGED
MODE PARAMETERS CHANGED
COMMAND SEQUENCE ERROR
CURRENT PROGRAM AREA IS NOT EMPTY
CURRENT PROGRAM AREA IS EMPTY
PERSISTENT PREVENT CONFLICT
INSUFFICIENT TIME FOR OPERATION
COMMANDS CLEARED BY ANOTHER INITIATOR
INCOMPATIBLE MEDIUM INSTALLED
CANNOT READ MEDIUM - UNKNOWN FORMAT
CANNOT READ MEDIUM - INCOMPATIBLE FORMAT
CANNOT WRITE MEDIUM - INCOMPATIBLE FORMAT
CANNOT FORMAT MEDIUM - INCOMPATIBLE MEDIUM
CANNOT WRITE - APPLICATION CODE MISMATCH
CURRENT SESSION NOT FIXATED FOR APPEND
MEDIUM FORMAT CORRUPTED
29
29
29
2A
2A
2A
2A
2B
2C
28
29
2A
2A
2C
2C
2C
2C
2E
2F
30
30
30
30
30
30
30
31
31
32
32
35
35
35
35
35
37
39
3A
3A
3A
3D
3E
3E
3E
3F
3F
3F
3F
40
43
44
45
46
47
48
49
4A
4B
4C
4D
4E
FORMAT COMMAND FAILED
NO DEFECT SPARE LOCATION AVAILABLE
DEFECT LIST UPDATE FAILURE
ENCLOSURE SERVICES FAILURE
UNSUPPORTED ENCLOSURE FUNCTION
ENCLOSURE SERVICES UNAVAILABLE
ENCLOSURE SERVICES TRANSFER FAILURE
ENCLOSURE SERVICES TRANSFER REFUSED
ROUNDED PARAMETER
SAVING PARAMETERS NOT SUPPORTED
MEDIUM NOT PRESENT
MEDIUM NOT PRESENT - TRAY CLOSED
MEDIUM NOT PRESENT - TRAY OPEN
INVALID BITS IN IDENTIFY MESSAGE
LOGICAL UNIT HAS NOT SELF-CONFIGURED YET
LOGICAL UNIT FAILURE
TIMEOUT ON LOGICAL UNIT
TARGET OPERATING CONDITIONS HAVE CHANGED
MICROCODE HAS BEEN CHANGED
CHANGED OPERATING DEFINITION
INQUIRY DATA HAS CHANGED
DIAGNOSTIC FAILURE ON COMPONENT NN (80H-FFH)
MESSAGE ERROR
INTERNAL TARGET FAILURE
SELECT OR RESELECT FAILURE
UNSUCCESSFUL SOFT RESET
SCSI PARITY ERROR
INITIATOR DETECTED ERROR MESSAGE RECEIVED
INVALID MESSAGE ERROR
COMMAND PHASE ERROR
DATA PHASE ERROR
LOGICAL UNIT FAILED SELF-CONFIGURATION
TAGGED OVERLAPPED COMMANDS (NN=QUEUE TAG)
OVAERLAPPED COMMANDS ATTEMPTED
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CWT Series
MICROBOARDS TECHNOLOGY, LLC
51
00
01
00
02
00
00
00
01
02
03
00
01
02
03
00
01
03
FF
00
01
02
03
04
00
00
01
00
00
01
02
03
04
05
00
01
02
03
04
05
06
00
00
FF
ERASE FAILURE
ERASE FAILURE - Incomplete erase operation detected
MEDIA LOAD OR EJECT FAILED
MEDIUM REMOVAL PREVENTED
SYSTEM RESOURCE FAILURE
UNABLE TO RECOVER TABLE-OF-CONTENTS
OPERATOR REQUEST OR STATE CHANGE INPUT
OPERATOR MEDIUM REMOVAL REQUEST
OPERATOR SELECTED WRITE PROTECT
OPERATOR SELECTED WRITE PERMIT
LOG EXCEPTION
51
53
53
55
57
5A
5A
5A
5A
5B
5B
5B
5B
5D
5D
5D
5D
5E
5E
5E
5E
5E
63
64
64
65
72
72
72
72
72
72
73
73
73
73
73
73
73
B6
B9
80
THRESHOLD CONDITION MET
LOG COUNTER AT MAXIMUM
LOG LIST CODES EXHAUSTED
FAILURE PREDICTION THRESHOLD EXCEEDED -
FAILURE PREDICTION THRESHOLD EXCEEDED - Predicted Media Failure
FAILURE PREDICTION THRESHOLD EXCEEDED - Predicted Spare Area Exhaustion
FAILURE PREDICTION THRESHOLD EXCEEDED (FALSE)
LOW POWER CONDITION ON
IDLE CONDITION ACTIVATED BY TIMER
STANDBY CONDITION ACTIVATED BY COMMAND
IDLE CONDITION ACTIVATED BY COMMAND
STANDBY CONDITION ACTIVATED BY COMMAND
END OF USER AREA ENCOUNTERED ON THIS TRACK
ILLEGAL MODE FOR THIS TRACK
INVALID PACKET SIZE
VOLTAGE FAULT
SESSION FIXATION ERROR
SESSION FIXATION ERROR WRITING LEAD-IN
SESSION FIXATION ERROR WRITING LEAD-OUT
SESSION FIXATION ERROR - INCOMPATIBLE TRACK IN SESSION
EMPTY OR PARTIALLY WRITTEN RESERVED TRACK
NO MORE RZONE RESERVATIONS ARE ALLOWED
CD CONTROL ERROR
POWER CALIBRATIOIN AREA ALMOST FULL
POWER CALIBRATION AREA IS FULL
POWER CALIBRATION AREA ERROR
PROGRAM MEMORY AREA UPDATE FAILURE
PROGRAM MEMORY AREA/RMA IS FULL
PROGRAM MEMORY AREA/RMA IS (almost) FULL
MEDIA LOAD/EJECT MECHANISM FAILED
PLAY OPERATION ABORTED
VENDOR SPECIFIC
16
Download from Www.Somanuals.com. All Manuals Search And Download.
CWT Series
MICROBOARDS TECHNOLOGY, LLC
Specifications
Recorder Drive:
Power Source:
Weight:
CD-R/RW Recorder
115V/230V 50-60Hz switchable power supply
58 pounds
Dimensions:
Power supply:
Environment:
7.48” (W) x 16.75” (D) x 24.5” (H)
400W
Temperature: 40°C (104°F) / 5°C (41°F)
Humidity: 20% - 80%
Supported Formats
CD-ROM Mode 1, CD-ROM XA Mode 2 (form 1, form 2),
Photo CD, CD-DA (Audio CD), CD-Extra, CD-R, CD-RW
Recording format
CD
Recording capacity (nominal)
Applicable media
CD
CD
700MB
CD-R, CD-RW
Firmware Updates
Occasionally it may be necessary to load updated firmware on to the CWT Series duplicator.
Only those firmware versions recommended and provided by Microboards Technical Support for
this specific product should be installed. Installation of an incorrect firmware on any Microboards
Technology product may result in any remaining warranty being voided.
Technical Support
For technical questions or support issues, contact Microboards Technology technical support:
United States
PH: 952-556-1639
FAX: 952-556-1628
Europe
PH: +44 (0) 845 230 7800
Japan
PH: 03-3561-2266
Please have the Model and Serial Number of your duplicator available when contacting Technical
Support.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CWT Series
MICROBOARDS TECHNOLOGY, LLC
Any unauthorized modification to this equipment may result in the revocation by the FCC of the user’s
authority to operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna
Increase the separation between the equipment and antenna
Connect the equipment into an outlet on a circuit different than that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help
This product is in conformity with the EMC Directive (89/336/EEC) through compliance with the following European
standards: EN 55022, EN 55024. The CE mark has been affixed in accordance with the CE Marking Directive
93/68/EEC.
Canadian Department of Communications (DOC) Statement
This Class B digital apparatus complies with the Canadian ICES-003 Issue 4:2004. Cet appareil numerique de la classe B est conforme a
la norme NMB-003 du Canade.
.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
|