Metra Electronics Automobile Accessories 99 6506 User Manual |
INSTALLATION INSTRUCTIONS FOR PART 99-6506
APPLICATIONS
Chrysler Pacifica
2004-2008
99-6506
KIT FEATURES
• DIN Head unit provision with pocket
• ISO DIN Head unit provision with pocket
KIT COMPONENTS
A) Radio Housing • B) ISO Brackets • C) Trim Plate
B
C
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Wire harnesses:
• CHTO-02 Chrysler/Dodge amplified interface 2002-up
• 70-6506 Chrysler/Dodge amplified bypass harness 2002-up
Antenna adapter:
A
• 40-CR10 - Chrysler/Dodge antenna adapter 2002-up
TOOLS REQUIRED:
Phillips Screwdriver • Small Flat Blade Screwdriver • Cutting Tool • T-15 Torx Driver
1-800-221-0932
© COPYRIGHT 2004-2009 METRA ELECTRONICS CORPORATION
Download from Www.Somanuals.com. All Manuals Search And Download.
DASH DISASSEMBLY
99-6506
CHRYSLER PACIFICA 2004-2008
Disconnect the negative battery
terminal to prevent an accidental
short circuit.
1
2
A
Loosen (1) T-15 Torx screw from the
P
R
front side of shift knob and pull up to
remove. (Figure A)
N
D
NOTE: For models equipped with no
AUTOSTICK
release lever on shift knob just turn
counter-clockwise to remove.
Unsnap floor console trim around the
shifter. Unplug harness to console
trim and remove trim. (Figure B)
3
Unsnap and remove ignition key
trimring.
4
5
B
Unsnap and remove the dash trim
panels from each side of the Radio/
P
Climate Controls. (Figure C)
R
N
Remove (4) Phillips screws to
6
D
remove radio.
AUTOSTICK
Note: When DIN mounting a radio a
piece of plastic in the dash cavity
may have to be removed for radio
depth clearance (Figure D).
C
D
POWER
OUTLET
POWER
OUTLET
1
Download from Www.Somanuals.com. All Manuals Search And Download.
KIT ASSEMBLY
99-6506
DIN HEAD UNIT PROVISION
A
Slide the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs outward. (Figure A)
1
2
Slide the aftermarket head unit into
the cage and secure. Snap the
Trimplate into the Radio Housing.
(Figure B)
Note: When DIN mounting a radio a
piece of plastic in the dash cavity may
have to be removed for radio depth
clearance. (Figure C)
B
C
POWER
OUTLET
POWER
OUTLET
2
Download from Www.Somanuals.com. All Manuals Search And Download.
KIT ASSEMBLY
99-6506
ISO DIN HEAD UNIT PROVISION
A
Mount the ISO Brackets to the head
unit with the screws supplied with
the unit. (Figure A)
1
2
Slide the head unit into the radio
opening until the side clips engage.
Snap the Trim Plate into the Radio
Housing. (Figure B)
B
3
Download from Www.Somanuals.com. All Manuals Search And Download.
FINAL ASSEMBLY
99-6506
FINAL ASSEMBLY
Locate the factory wiring harness in the dash and make the connection as shown.
Metra recomends using the proper mating adapter and making the connections as
shown. (Isolate and individually tape off the ends of any unused wires to prevent
electrical short circuit.)
1
Re-connect the negative battery terminal and test the unit for proper operation.
Reassemble radio and dash assemblies in reverse order of disassembly.
2
3
FINAL WIRING CONNECTIONS
Make wiring connections using the EIA color code chart shown below and the instructions included with the head
unit. Metra recommends making connections as shown below; Strip, Splice, Solder, Tape. Isolate and individually
tape off ends of any unused wires to prevent electrical short circuit.
A
A)
B)
C)
D)
Strip wire ends back 1/2"
Twist ends together
Solder
B
C
D
Tape
METRA / EIA WIRING CODE
12V Ignition / Acc . . . Red
Right Front (+) . . . . . Gray
12V Batt / Memory . . Yellow
Ground . . . . . . . . . . . Black*
Power Antenna . . . . . Blue
Right Front (-). . . . . . Gray / Black
Left Front (+) . . . . . . White
Left Front (-). . . . . . . White / Black
Right Rear (+). . . . . . Violet
Amp Turn-On . . . . . . Blue / White
Amp Ground . . . . . . . Black / White
Illumination. . . . . . . . Orange
Dimmer . . . . . . . . . . Orange / White
Right Rear (-) . . . . . . Violet / Black
Left Rear (+). . . . . . . Green
Left Rear (-) . . . . . . . Green / Black
*NOTE: When Black a wire is not present, ground radio to vehicle chassis.
All colors may not be present on all leads due to manufacturer’s specifications.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
95-6506
NOTES
5
Download from Www.Somanuals.com. All Manuals Search And Download.
99-6506 INSTRUCTIONS
1-800-221-0932
© COPYRIGHT 2004-2009 METRA ELECTRONICS CORPORATION
REV. 04/20/09
INST99-6506
Download from Www.Somanuals.com. All Manuals Search And Download.
|