WELDING TECHNOLOGY
COMPACT
PRECISION
TECHNOLOGY.
Our engineers knowwhat they are doingwhen it comes to top classwelding equipment.
They keep in close contact with those who know best what good welding equipment
is all about: the craftspeople. That is why a Metabo welding device has everything you
need.That is a promise, because in addition to designing our welding equipment from
start to finish, we also produce and assemble it - from the transformer to the entire
electronics. The strictest of quality checks are therefore quite normal and the five year
warranty on the main transformer is a logical conclusion. Metabo. Work. Don’t play.
Download from Www.Somanuals.com. All Manuals Search And Download.
322 |
WELDING TECHNOLOGY
ALWAYS THE RIGHT TORCH.
Electrode welding, TIG welding, MIG/MAG welding – engineering department is always looking for the latest
Metabo has the right welding unit for all materials and technology to enable our customers in craft and industry
for every thickness. However, that is not enough: Our to work even more quickly, more rationally and more ef-
An overview of welding types.
Electrode welding.
Stick electrode
ꢀ The electric arc burns between the
workpiece and a melting electrode.
ꢀ The electrode provides the
additional material.
ꢀ The melting case forms gases
and slag to protect the electric arc
and melting bath from negative
atmospheric influences.
ꢀ Can be used for almost all
weldable materials from approx.
1.5 mm on (adapt stick electrodes
to the basic material)
ꢀ All inverters (electronic devices)
use direct current.
Advantages:
Casing
– The electric arc burns more steadily
– Devices can be used with optional
torch for the TIG DC welding
method
ꢀ The following applies for setting
the welding current in Ampere:
electrode diameter x 40 = welding
current in Ampere.
Core rod
Gas/slag
Electric arc
ꢀ Transformer devices use
alternating current (e.g. SB/SK).
Melted zone
Base material
Gas nozzle
TIG welding.
ꢀ The electric arc burns between
the workpiece and a non-melting
tungsten electrode (TIG = Tungsten
Inert Gas).
ꢀ A separately fed inert gas (e.g.
Argon (Ar)) protects the welding
zone from negative atmospheric
influences.
ꢀ The TIG AC method (alternating
current) must be used for alu-
minium, magnesium and their
alloys (breaking of the oxide layer
on the material).
ꢀ The advantage of the method is
the good control of the concentra-
ted splatter-free electric arc
(= less delay and rework).
Tungsten electrode
Inert gas
ꢀ Additional material can be fed
manually if required.
Electric arc
ꢀ The TIG DC (direct current) method
is for welding all metals from
0.3 mm on, except aluminium and
magnesium. (The TIG torch must
always be connected to the nega-
tive pole).
Melted zone
Base material
MIG/MAG welding.
Inert gas nozzle
ꢀ The electric arc burns between the
workpiece and a mechanically fed
welding wire (electrode).
pipe steel from approx. 0.5 mm on
in combination with gases mixed
from Argon (Ar) and carbon dio-
xide (CO2) or from pure carbon
dioxide (CO2).
ꢀ High alloy steel is processed with
the MAG method using inert Argon
(Ar) gases and a low proportion
(< 5%) of carbon dioxide (CO2).
ꢀ The advantages of the method are
the easy handling and the excellent
thin sheet metal properties.
Flow nozzle
Electrode
ꢀ An automatically fed non-com-
bustible gas protects the electric
arc and the melting bath from
negative atmospheric influences.
ꢀ The MIG method (MIG = Metal
Inert Gas) is for processing alu-
minium and aluminium alloys.
Argon (Ar), Helium (He) and their
mixtures are used as gases.
Inert gas
Electric arc
ꢀ The MAG method (MAG = Metal
Active Gas) is used for processing
general construction, tank and
Melted zone
Base material
Download from Www.Somanuals.com. All Manuals Search And Download.
324 |
WELDING TECHNOLOGY
ficiently. Example: The innovative sinus inverter techno- “Smart Intelligence” – with state-of-the-art electronics
logy by Metabo. High welding output but low fuel con- for ideal welding results.
sumption. Or the microprocessor control – we call it
Which welding device is suitable for which material?
Electrode welding
Device type
Max. Ø
Electrodes
Weldable
Material
thickness
Weldable materials with electrode
Weldable materials with TIG
Steel
Stainless
steel (VA)
Aluminium Steel
Stainless
steel (VA)
Nonferrous
heavy metals***
E 130
E 150
3,25 mm
3,25 mm*
4,0 mm
5,0 mm
5,0 mm
3,25 mm
4,0 mm
1,5–5 mm**
1,5–5 mm**
1,5–5 mm**
2,5–6 mm
2,5–7 mm
2,5–4 mm
•
•
•
•
•
•
•
•
•
•
•
•
•
•
–
–
–
–
–
–
–
•
•
•
•
•
•
E 170 Si
SK 200
SK 230
SB 140
SB 200 CT
•
•
•
–
–
–
–
–
–
–
–
–
–
–
–
2,5–5 mm
* Cr Ni up to 4.0 mm
** TIG from 0.3 mm on
*** except aluminium
TIG welding
Device type
Weldable
Material
thickness
Weldable materials
Steel
Stainless steel (VA)
Nonferrous heavy metals
Aluminium
TIG 170 DC
TIG 170 AC/DC
0,3–6 mm
0,3–6 mm
•
•
•
•
•
•
–
•
MIG/MAG welding
Device type
Weldable
wire
Weldable
Material
thickness
Weldable materials
Steel
Stainless steel (VA)
Aluminium
MIG/MAG 140
MIG/MAG 160
0,6–0,8 mm
0,6–0,8 mm
0,6–0,8 mm
0,6–0,8 mm
0,6–1,0 mm
0,6–1,2 mm
0,6–1,2 mm
0,5–3 mm
0,5–4 mm
0,5–5 mm
0,5–6 mm
0,5–8 mm
0,5–10 mm
0,5–15 mm
•
•
•
•
•
•
•
•
•
•
•
•
•
•
*
*
•
•
•
•
•
MIG/MAG 150/20 XT
MIG/MAG 170/30 XTC
MIG/MAG 200/40 XT
MIG/MAG 250/60 XT
MIG/MAG 300/45 XT
* conditionally applicable
Note: The specified material thickness values are only standard values.
Thicker materials can naturally also be processed by appropriate
seam preparation and multi-layer structure of the weld seam.
SINUS INVERTER TECHNOLOGY.
Sinus inverter
Standard inverter
An optimisation of the output factor
is achieved using the sinus-inverter
technology by Metabo.This means
that a higher output is possible with
lower current consumption from the
230 V energy supply.
ꢀ No oversized current generators
due to the reduced power con-
sumption.
ꢀ Welding gaps that can be caused
by long cable extensions, are a
thing of the past.
U; I
U; I
t
t
Advantages:
ꢀ High welding output at 230 V
(electrode up to 170 A).
ꢀ Future standards are already
met today.
Loss
Output
Download from Www.Somanuals.com. All Manuals Search And Download.
| 325
WELDING GLOSSARY
Welding technology from A to Z.
AC
DIODE
INDUCTION COIL
Abbreviation for Alternating Current.
Electrode and TIG welding can be carried
out with direct current and alternating
current. TIG aluminium welding must be
carried out with alternating current.
Electronic component (semi-conductor).
Converts alternating current into direct
current one-way by a blocking effect.
A coil wound with copper wire. Acts like an
energy buffer and helps to optimise the
welding current. Also see choke.
CHOKE
INSULATION CLASS
A wound copper coil with iron core. Serves
as energy storage unit. Provides a smooth,
low-splatter electric arc, thus achieving ideal
welding results. Also see induction coil.
Specifies how hot the transformer’s
insulation may get without causing
damage. The temperature is monitored
by a thermal switch, e.g. F = 155°C.
ANALOGUE CURRENT SOURCE
A current source that is controlled by
resistances. Formerly used in expensive
industrial systems. Hardly used today due
to high costs and inflexibility.
DUTY CYCLE
CONTACT IGNITION
Theoretical value for the capacity of a
Also called surface ignition. To ignite
the electric arc during TIG welding, the
tungsten needle must touch the workpiece.
The disadvantage is that the tungsten
needle easily sticks to the workpiece, thus
damaging the needle. The electric arc is no
longer as stable.
welding device. Is calculated according to
standards with 10 min. and specified in %.
(e.g. 40% ED = 4 min. welding at max. output,
6 min. break). The device does not heat up
too strongly, as it is switched off thermally.
ANTI-STICK MECHANISM
If the electrode gets stuck to the workpiece,
the welding current is turned off. The
electrode doesn‘t anneal and can be easily
removed from the workpiece.
FORMING GAS
ARC-FORCE REGULATION
Nitrogen or nitrogen with up to 50% hydro-
gen. For protecting roots (opposite sides)
of weld seams when welding high alloy
steel before oxidation. The corrosion
resistance is maintained.
COOLING TYPE
The welding output is kept constant at the
set value as far as possible for electrode
welding. The electric arc burns steadily
(even with difficult electrodes or positions).
Advantage: The welding result is more even.
Type of device cooling. F = external cooling
(with fan), S = self-cooling (without fan).
SHORT LIGHT ARC
A MIG/MAG light arc in the low welding
current range (thin sheet/root welding)
with fine drop transition in the short
circuit by the use of mixed gases or carbon
dioxide.
GAS POST FLOW TIME
BALANCE CONTROL
Adjustable time that lets the gas continue
to flow after the welding process. Is for
protecting the glowing tungsten electrode
and the welded product from atmospheric
influences.
TIG AC welding. By shifting the ratio from
negative proportion to positive proportion,
more or less fusion penetration is achieved
on the workpiece. As opposed to fusion
penetration, the tungsten electrode gets
hotter or colder.
LONG LIGHT ARC
MIG/MAG light arc with large drop
transitions, non-short circuit-free, by the
use of mixed gases or carbon dioxide. For
weld seams on thick workpieces.
RECTIFIER
For wiring multiple diodes. Converts
alternating current into direct current
multi-way by a blocking effect.
IDLE POWER
Power consumed by a device from the mains
that is not converted to welding power.
HIGH FREQUENCY IGNITION
LIFT ARC IGNITION
Ignites the electric arc during TIG welding
without touching the workpiece. Due to a
high voltage pulse, the air gap between the
workpiece and the tungsten needle is
electrically conductive (ionised).
Surface ignition during TIG welding with
minimum current. The set welding current
is only released after the ignition of the
electric arc. The advantage is the gentle
ignition without the tungsten needle
sticking to the workpiece and thus a stable
electric arc.
DC
Abbreviation for Direct Current. MIG/MAG
welding for example, is carried out with
direct current.
DIGITAL CURRENT SOURCE
HOT START
Microprocessor-controlled
current source.
Hot-start ignition aid for igniting the electric
arc of an electrode rod during electrode
welding. The electric arc ignites immediately
and steady due to an automatic and
temporary increase of the welding current.
Download from Www.Somanuals.com. All Manuals Search And Download.
326 |
WELDING GLOSSARY
MICROPROCESSOR
CONTROL
PROTECTION TYPE
TRANSISTOR
(PROTECTION CLASS)
Electronic component (semi-conductor).
Works as an electronic on/off switch.
Analogue and digital control of the
electrical current (large currents) possible
with small current intensities.
Specification for the protection of a device
from water (rain) and dirt.
(e.g. IP 23:
2 = protection against foreign matter
≥ Ø 12.5 mm,
Electronic control (Smart Intelligence) that
takes over the control within the current
source using state-of-the-art electronics.
The advantage is an optimum welding
result.
3 = protection against splashes of water)
EFFECTIVE OUTPUT
MIXED LIGHT ARC
SECONDARY TIMING
Power that is released as welding power
by a device. Measured in Watt (W).
A transition light arc that lies between short
and long light arcs. The drop transitions take
place partly in the short circuit (see long arc).
Inverter principle. The mains frequency is
boosted by an electronic unit behind the
transformer.
2/4 CYCLE CONTROL
VOLTAGE
PFC
Welding torch operation option. 2 cycles =
welding with permanently pressed torch
button, 4 cycles = starts on pressing the
torch button the first time, switches off by
repeated pressing of torch button (button
need not be held down during welding).
The pressure (force) that enables electrons
to flow in a closed current circuit. Measured
in Volt (V).
Power Factor Control. For sinusoidal current
consumption from the mains. The advantage
is the lower current consumption or a higher
welding output at 230 V.
SPRAY ARC
MIG/MAG light arc with fine-drop and
short-circuit-free transition using mixed gas
or argon. Especially suitable for fillet welds
and V-welds (medium and top layers).
POINT-TO-POINT CONTROL
Electronic control during MIG/MIG welding
that automatically switches off the wire feed.
The advantage is an even dot size during
welding.
CURRENT
Number of electrons that flow through a
conductor in a closed current circuit.
Measured in Ampere (A).
PRIMARY TIMING
Inverter principle. The mains frequency
of 50 Hz is transformed to a frequency of up
to 100 kHz by an electronic unit in front of
the transformer. Advantage: Small and light
welding devices.
S-MARK
Approval sign. Devices with this sign have a
max. no-load voltage of 113 V direct current
or 48 V alternating current. They may then
be used at welding locations with increased
electrical danger (e.g. for container and tank
construction).
POTENTIAL SEPARATION
Also referred to as galvanic separation.
Insulated structure between two voltages,
e.g. mains voltage and welding current.
CLEANING EFFECT
THYRISTOR
See rectifier.
Electronic component (semi-conductor).
Works like a controlled diode, thereby
allowing the welding voltage and welding
current to be controlled.
APPARENT OUTPUT
Total consumed power of a device from the
mains (or current generator). The apparent
output is the sum of idle power and actual
output. Measured in kVA.
TRANSFORMER
Converter. Converts the mains voltage to
harmless welding voltage. The possible
welding current is increased in the same
proportion.
Download from Www.Somanuals.com. All Manuals Search And Download.
| 327
ELECTRODE WELDING SYSTEMS
THEY LIKE TO PLAY WITH FIRE.
As if made for tough construction site applications: sturdy used outdoors in difficult conditions. Wind? No problem!
design and easy to operate. Electrode welding devices are By the time you get to the latest TIG function capability
real all-rounders. From roughly 1.5 mm on, they can weld you will be full of enthusiasm for an electrode welding
almost anything that can be welded. They can even be system that has absolutely earned the name Metabo.
e.g. E 150
Multifunctional carry belt
for easy and practical
device transport.
Smart intelligence
State-of-the-art processor
control for simple operation
and ideal welding results.
High duty cycle
due to additional
fan function.
Ergonomic and
protected control
elements.
Multi-scale
for the easy
adjustment of the
welding current.
Lift arc function
with switch
for X-ray safe TIG
welding with an
optional TIG torch.
Sturdy metal housing
with protection class IP 23C
for safe use in rough construc-
tion site conditions.
“S mark“ approved for welding
even in narrow spaces with
increased electrical risk.
Download from Www.Somanuals.com. All Manuals Search And Download.
328 |
ELECTRODE WELDING SYSTEMS
COMMON FEATURES
ꢀ
ꢀ
ꢀ
ꢀ
"Smart intelligence": state-of-the-art processor control for easy
operation and ideal welding results
Automatic hot start for perfect ignition of electric arc
Arc-force regulation for even welding results
Anti-stick mechanism prevents electrodes from sticking
Switchable lift arc function for x-ray safe TIG welding with
High duty cycle due to additional fan function
Robust metal housing
Housing with protection class IP 23C for safe,
rough construction site application
"Multi-function shoulder strap": for light and practical
device transport
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
an optional TIG torch
Ergonomic and protected control elements
Large control elements for optimum adjustment even with gloves
Multiscale for easy welding current adjustment
Removable welding and earth cable
"S-mark": approved for welding even in narrow welding
spaces with increased electrical danger
CE-inspected
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Electronics dust-proof
E 130 Set
E 150 Set
E 130
E 150
Electrode
Welding System
E 130 Set
E 170 Si
Electrode
Welding System
E 130
Electrode
Welding System
E 150
Electrode
Welding System
E 150 Set
Electrode
Welding System
E 170 Si
Special advantages
ꢀ
"Sinus technology": due to
ꢁ
lower power consumption,
problem-free operation at
long cable extensions or
smaller power generators
ꢀ
CrNi electrodes weldable
ꢁ
ꢁ
up to 4 mm
Comparative
device characteristics
Mains voltage
230 V
230 V
230 V
230 V
230 V
Open circuit voltage E/TIG
Setting range, infinitely varia-
ble, at 230 V
90 V/25 V
10 - 130 A
90 V/25 V
10 - 130 A
90 V/25 V
10 - 150 A
90 V/25 V
10 - 150 A
90 V/25 V
5 - 170 A
Maximum power input
Maximum duty cycle
E/TIG at 40°C
6 kVA
25 %/35 %
6 kVA
25 %/35 %
7,1 kVA
25 %/35 %
7,1 kVA
25 %/35 %
5,7 kVA
25 %/35 %
100% duty cycle E/TIG at 40°C
Weldable electrodes up to
Weldable material thickness
Fuse protection for 230 V
Dimensions L x W x H
Weight
80 A/100 A
3,25 mm
1,5 - 5 mm
T 16 A
80 A/100 A
3,25 mm
1,5 - 5 mm
T 16 A
90 A/110 A
3,25 mm
1,5 - 5 mm
T 16 A
90 A/110 A
3,25 mm
1,5 - 5 mm
T 16 A
100 A/110 A
4 mm
1,5 - 5 mm
T 16 A
300 x 130 x 210 mm 300 x 130 x 210 mm 300 x 130 x 210 mm 300 x 130 x 210 mm 400 x 210 x 240 mm
6,2 kg 6,2 kg 6,3 kg 6,3 kg 7,8 kg
Standard equipment
Electrode and earth Electrode and earth Electrode and earth Electrode and earth Electrode and earth
cables, protective
shield, wire brush
and deslagging
hammer
cables, protective
shield, wire brush
and deslagging
hammer, stick
electrodes
cables, protective
shield, wire brush
and deslagging
hammer
cables, protective
shield, wire brush
and deslagging
hammer, stick
electrodes
cables, protective
shield, wire brush
and deslagging
hammer
3.25 x 350 mm
E 4322 RR 6
3.25 x 350 mm
E 4322 RR 6
(25 units),
(25 units),
aluminium case
metal case
Type
E 130
E 130 Set
E 150
E 150 Set
E 170 Si
Order no.
0021013000
0021013100
0021015000
0021015100
0021017000
Download from Www.Somanuals.com. All Manuals Search And Download.
| 329
ELECTRODE WELDING SYSTEMS
COMMON FEATURES
ꢀ
ꢀ
ꢀ
Removable welding and earth cable
5 year warranty on main transformer
CE-inspected
ꢀ
Large control elements for optimum adjustment
even with gloves
ꢀ
Welding current display
ꢀ
Copper coil with heat protection for long service life
ꢀ
Operation at 230 V and 400 V
ꢀ
Impact-resistant, fully insulated plastic housing
....5 year warranty
on main transformer
SK 200
SK 230
Electrode Welding System
SK 200
Electrode Welding System
SK 230
Comparative device characteristics
Mains voltage
Setting range, infinitely variable, at 230 V
Setting range, infinitely variable, at 400 V
Maximum power input
Maximum duty cycle at 25 °C
Maximum duty cycle at 40 °C
100% duty cycle at 25 °C
100% duty cycle at 40 °C
Weldable electrodes up to
Weldable material thickness
Fuse protection for 230 V
Fuse protection for 400 V
Dimensions L x W x H
230/400 V
25 - 110 A
45 - 200 A
4,3/11,8 kVA
25 %/5 %
17 %/3 %
55 A
35 A
5 mm
2,5 - 6 mm
T 16 A
T 25 A
230/400 V
25 - 115 A
55 - 220 A
4,5/13,7 kVA
25 %/5 %
17 %/3 %
60 A
40 A
5 mm
2,5 - 7 mm
T 16 A
T 25 A
440 x 230 x 430 mm
37 kg
440 x 230 x 430 mm
39,5 kg
Weight
Standard equipment
Electrode and earth cables, protective shield,
wire brush and deslagging hammer,
connection adapter 230 V/400 V
Electrode and earth cables, protective shield,
wire brush and deslagging hammer,
connection adapter 230 V/400 V
Type
SK 200
SK 230
Order no.
0021022004
0021022306
Download from Www.Somanuals.com. All Manuals Search And Download.
330 |
ELECTRODE WELDING SYSTEMS
COMMON FEATURES
ꢀ
Large control elements for optimum adjustment
even with gloves
ꢀ
Copper coil with heat protection for long service life
ꢀ
Robust metal housing
ꢀ
5 year warranty on main transformer
ꢀ
CE-inspected
....5 year warranty
on main transformer
SB 140
SB 200 CT
Electrode Welding System
SB 140
Electrode Welding System
SB 200 CT
Special advantages
ꢀ
Welding current display
High duty cycle due to additional fan function
Operation at 230 V and 400 V
ꢁ
ꢁ
ꢁ
ꢀ
ꢀ
Comparative device characteristics
Mains voltage
Setting range, infinitely variable, at 230 V
Setting range, infinitely variable, at 400 V
Maximum power input
Maximum duty cycle at 25 °C
Maximum duty cycle at 40 °C
100% duty cycle at 25 °C
100% duty cycle at 40 °C
Weldable electrodes up to
Weldable material thickness
Fuse protection for 230 V
Fuse protection for 400 V
Dimensions L x W x H
230 V
35 - 140 A
230/400 V
20 - 110 A
60 - 180 A
4,2/10,2 kVA
15 %/10 %
10 %/7 %
65 A
45 A
4 mm
2,5 - 5 mm
T 16 A
T 20 A
3,8 kVA
3,25 mm
2,5 - 4 mm
T 16 A
310 x 185 x 275 mm
11,8 kg
470 x 280 x 320 mm
23,5 kg
Weight
Standard equipment
Electrode and earth cables, protective
shield and deslagging hammer,
connection adapter 230 V/400 V
Type
SB 140
SB 200 CT
Order no.
0271061501
0271062001
Download from Www.Somanuals.com. All Manuals Search And Download.
| 331
ACCESSORIES FOR ELECTRODE WELDING SYSTEMS
FOR E 130, E 150, E 170 SI
Torch caps
Tungsten electrodes
See page 347
Version
Suitable for
Order no.
Long
Short
SR 17/18/26
SR 17/18/26
1327127230
1327127248
TIG welding torches
Accessory box
Order no.
Torch type
Length
m
Suitable for
Order no.
SR 17 V
SR 17 V
SR 17 V
SR 26 V
SR 26 V
2
4
8
4
8
E 130, E 150
E 130, E 150
E 130, E 150
E 170 Si, E 200 DCI 0902014047
E 170 Si, E 200 DCI 0902014055
0902018956
0902012524
0902012532
Clamping sleeves
Accessory box SR 17/SR 17V
0902014497
Consisting of:
Tungsten electrode 1.0 x 175 mm, green WP 20
Tungsten electrode 1.6 x 175 mm, green WP 20
Tungsten electrode 2.4 x 175 mm, green WP 20
Clamping sleeve 1.0 mm
Clamping sleeve 1.6 mm
Clamping sleeve 2.4 mm
Diameter
mm
Suitable for
Order no.
Clamping sleeve housing 1.0 mm
Clamping sleeve housing 1.6 mm
Clamping sleeve housing 2.4 mm
Ceramic gas nozzle size 5, Ø 8.0 mm
Ceramic gas nozzle size 6, Ø 9.5 mm
Ceramic gas nozzle size 7, Ø 11.0 mm
Torch cap long
1
SR 17/18/26
SR 17/18/26
SR 17/18/26
SR 17/18/26
SR 17/18/26
1327127078
1327127086
1327127094
1327135429
1327148423
1,6
2,4
3,2
4
Torch cap short
Carry case
Clamping sleeve housing
Accessory box SR 18/SR 26/26 V
Consisting of:
0902014500
Diameter
mm
Suitable for
Order no.
Tungsten electrode 1.6 x 175 mm, green WP 20
Tungsten electrode 2.4 x 175 mm, green WP 20
Tungsten electrode 3.2 x 175 mm, green WP 20
Tungsten electrode 1.6 x 175 mm, green WP 20
Tungsten electrode 2.4 x 175 mm, green WP 20
Tungsten electrode 3.2 x 175 mm, green WP 20
Clamping sleeve 1.6 mm
1
SR 17/18/26
SR 17/18/26
SR 17/18/26
SR 17/18/26
SR 17/18/26
1327127132
1327127140
1327127159
1327135410
1327148431
1,6
2,4
3,2
4
Clamping sleeve 2.4 mm
Clamping sleeve 3.2 mm
Clamping sleeve housing 1.6 mm
Clamping sleeve housing 2.4 mm
Clamping sleeve housing 3.2 mm
Ceramic gas nozzle size 5, Ø 8.0 mm
Ceramic gas nozzle size 6, Ø 9.5 mm
Ceramic gas nozzle size 7, Ø 11.0 mm
Torch cap long
Ceramic gas nozzles
Torch cap short
Carry case
Size
Diameter
mm
Version
Suitable for
Order no.
Welding site equipments
Size 4
Size 5
Size 6
Size 7
Size 8
6,5
8
9,5
11
Long
Long
Long
Long
Long
SR 17/18/26
SR 17/18/26
SR 17/18/26
SR 17/18/26
SR 17/18/26
1327180505
1327127876
1327127175
1327127884
1327135402
Order no.
Welding site equipment no. 3
Consisting of welding cable, earth cable, welding shield,
wire brush and deslagging hammer
Cable diameter: 16 mm²
1327021849
12,5
Length: 3 m
Suitable for: E 130, E 150
Download from Www.Somanuals.com. All Manuals Search And Download.
332 |
ACCESSORIES FOR ELECTRODE WELDING SYSTEMS
Order no.
Maximum welding current
A
Order no.
Welding site equipment no. 4
Consisting of welding cable,
electrode cable
Cable diameter: 16 mm²
Length: 5 m
1327628760
Earth clamps
200
0902027467
Suitable for: E 130, E 150
Welding site equipment no. 5
Consisting of welding cable, earth cable,
welding shield, wire brush
and deslagging hammer
Cable diameter: 16 mm²
Length: 5 m
1327022020
1327022381
Rod holder
200
0902027440
Suitable for: E 130, E 150
Welding site equipment no. 7
Consisting of welding cable, earth cable,
welding shield, wire brush
and deslagging hammer
Cable diameter: 25 mm²
Length: 3 m
Cable
diameter
mm²
Length Suitable for
m
Order no.
Earth cable
25
3
SK 200
0902008365
0902007180
Suitable for: E 170 Si, E 200 DCI,
SK 200
Electrode cable
35
3
E 200 DCI, SK 200
Maximum welding current
A
Order no.
FOR SB 230, SB 260, SK 230, SK 260
Earth clamps
200
0902027467
Order no.
Welding site equipment no. 8
Consisting of welding
cable, earth cable,
welding shield,
wire brush and
1327022578
Rod holder
200
0902027440
deslagging hammer
Cable diameter: 35 mm²
Length: 3 m
Suitable for: SK 230, SK 260,
SB 230 T, SB 260T
Cable
Length Suitable for
Order no.
diameter
mm²
m
Maximum welding current
A
Order no.
Earth cable
Earth clamps
25
16
3
3
E 170 Si,
E 130, E 150
0902008365
1002004999
400
0902027475
Electrode cable
35
3
E 170 Si
0902007180
Rod holder
300
0902027459
FOR SB 160 C, SB 200 CT
Order no.
Welding glass 75x98 mm,
dark DIN 11
1321186455
Cable
diameter
mm²
Length Suitable for
m
Order no.
Earth cable
35
5
SK 230,
SK 260,
SB 230 T,
SB 260 T
0902011293
FOR E 200 DCI, SB 160 C, SB 200 CT, SB 200, SK 200
Order no.
1327022381
Electrode cable
Welding site equipment no. 7
Consisting of welding cable,
earth cable, welding shield,
wire brush and deslagging
hammer
35
3
SK 230,
SB 230 T,
SB 260 T
0902007180
Cable diameter: 25 mm²
Length: 3 m
Suitable for: E 170 Si, E 200 DCI,
SK 200
Other accessories
for welding systems
See page 346/347
Download from Www.Somanuals.com. All Manuals Search And Download.
| 333
|