ROUTERS AND PLANERS
FOR PROS
WITH PROFILE.
Every Metabo is checked thoroughly before leaving our factory. This precision pays off
for our customers, especially with routers and planers. Their areas of application require
absolute precision. Adjustments, trimming or dressing jobs demand precision to the
millimetre. With routers, the safety aspect is also of importance. Good for whoever relies
on Metabo. Metabo. Work. Don’t play.
Download from Www.Somanuals.com. All Manuals Search And Download.
176 |
ROUTERS
COMMON FEATURES
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Sturdy 2-column guide
Robust plastic-covered aluminum die cast bearing flange
Hardened and ground interchangeable collect chuck
for precise concentricity of tools
Spindle lock for easy router bit change
Very suitable for moulding/routing heat-sensitive
Thumbwheel for preselection of speed
ꢀ
Turn the machine on and off without releasing the handle
Aluminum die cast base plate with coating for easy sliding
Parallel guide/ripping fence guided in prisms
Auto-stop carbon brushes
ꢀ
ꢀ
ꢀ
External dust extraction outlet
materials and plastics
OFE 738
Of E 1229
Signal
Of E 1812
710 Watt
Electronic Router
OFE 738
1200 Watt
Electronic Router
Of E 1229 Signal
1800 Watt
Electronic Router
Of E 1812
Special advantages
ꢀ
Dial gauge for fine tuning the moulding/
routing depth with 0.1. mm precision
Three-level stop to preselect up to
ꢁ
ꢁ
ꢀ
ꢁ
3 different moulding/routing depths
ꢀ
Vario Constamatic (VC) full-wave
ꢁ
electronics
ꢀ
Vario Tacho Constamatic (VTC) full-wave
electronics
Overload protection
Precise parallel guide/ripping fence
ꢁ
ꢁ
ꢁ
ꢀ
ꢁ
ꢁ
ꢀ
guided in prisms with fine adjustment
ꢀ
Can also be used in combination with
the precision guide rail 6.31213
Bayonet fitting of motor section
in moulding/routing adapter
Motor section suitable for actuating
flexible shafts
Motor section for fixed use in
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢀ
ꢀ
ꢀ
routing-drilling stand 700
Comparative device characteristics
Maximum stroke height
No load speed
50 mm
10.000 - 27.000 /min
710 W
50 mm
5.000 - 25.500 /min
1.200 W
80 mm
8.000 - 22.000 /min
1.800 W
Rated input power
Output power
430 W
780 W
1.200 W
Rated load speed
Collet bore of collet chuck
Weight (without mains cable)
19.500 /min
8 mm
25.500 /min
8 mm
22.000 /min
12 mm
3 kg
3,4 kg
5,1 kg
Standard equipment
Parallel guide/ripping fence,
extraction connector,
open-jawed spanner
Dial gauge for fine adjustment, Fine adjustment parallel guide/
fine adjustment parallel guide/
ripping fence, extraction
ripping fence, extraction
connector, open-jawed spanner
connector, open-jawed spanner
Type
Order no.
OFE 738
6.00738
Of E 1229 Signal
Of E 1812
6.01812
ꢀ
ꢀ
6.01229
Download from Www.Somanuals.com. All Manuals Search And Download.
178 |
ROUTERS, ROUTER AND GRINDER MOTORS
EQUIPMENT FEATURES
ꢀ
ꢀ
Robust plastic-covered aluminum die cast bearing flange
Motor section for fixed use in routing-drilling stand 700
ꢀ
ꢀ
Hardened and ground interchangeable collect chuck
Suitable for actuating flexible shafts
for precise concentricity of tools
ꢀ
Vario Constamatic (VC) full-wave electronics
ꢀ
Thumbwheel for preselection of speed
ꢀ
Auto-stop carbon brushes
Collets
Collet bore
Order
no.
For OFE 738, Of E 1229 Signal,
FME737
and die grinders
3 mm
1/8" (3.18 mm)
6 mm
1/4" (6.35 mm)
8 mm
6.31947
6.31948
6.31945
6.31949
6.31946
For Of E 1812
6 mm
1/4" (6.35 mm)
8 mm
3/8" (9.53 mm)
10 mm
12 mm
6.31565
6.31566
6.31567
6.31568
6.31571
6.31569
6.31570
FME 737
1/2" (12.7 mm)
710 Watt Electronic
Router and Grinder Motor
FME 737
Accessories for router Of E 1812
Order
no.
Comparative device characteristics
No load speed
Rated input power
Output power
Rated load speed
10.000 - 27.000 /min
710 W
Socket driver /connector
With shaft Ø 12 mm
and thread M 12 x 1 for
router bits with M 12 x 1
female thread
6.31574
430 W
19.500 /min
8 mm
Collet bore of collet chuck
Weight (without mains cable)
1,4 kg
Circle-cutting centering pin
6.31573
ꢀ
For inserting in one of the
bars of the router's parallel
guide/ripping fence,
Standard equipment
2 open-jawed spanner
for milling circular grooves
and similar work
Template followers
ꢀ
For engraving text etc.
using a template clamped
on to the workpiece with
guide bush
Diameter: 17 mm
Diameter: 24 mm
Diameter: 27 mm
Diameter: 30 mm
Diameter: 40 mm
6.31575
6.31576
6.31577
6.31578
6.31579
Type
Order no.
FME 737
6.00737
Download from Www.Somanuals.com. All Manuals Search And Download.
| 179
ACCESSORIES FOR ROUTERS
Order no.
FOR OFE 738 AND OFE 1229 SIGNAL
Precision guide rail
Clean-cut edges
with no splintering
thanks to the guide
rail's plastic-extrusion
strip edging –
6.31213
Order no.
ꢀ
Parallel guide
Parallel guide/
6.31507
NEW
ripping fence with
fine adjustment for
routers OFE 738 and
Of E 1229 Signal
(supplied as standard)
even with bevel
cuts up to 45°
Guide rail made of
ꢀ
sturdy, anodised
Aluminium
extrusion
Guide with guide roller
For fitting on the
6.30360
6.31504
ꢀ
parallel guide/ripping
fence of routers
OFE 738 and
Of E 1229 Signal,
for moulding/routing
curved edges
ꢀ
Anti-slip backing
provides safe and
reliable support
and protects the
workpiece surface
against scratches
Guide rule,
adjustable
to eliminate play
Overall length:
1.500 mm
Router guide
For these tasks
the 6.31503
intermediate plate
must be fitted to the
router's base plate
Enables moulding/
routing with routers
OFE 738 and
Of E 1229 Signal
along the precision
guide rail 6.31250/
6.31213
ꢀ
Circle-cutting
centering pin
ꢀ
For using in the
parallel guide/
ripping fence of
routers OFE 738 and
Of E 1229 Signal,
for milling circular
grooves and
6.31248
similar work
ꢀ
Mitre guide
6.30103
ꢀ
Provides particularly
good guidance for
the routers OFE 738
and Of E 1229 Signal
when working on the
edges of boards and
panels, (e.g. for cutting
recesses for furniture
fittings and mortise
locks, or grooves for
tongued edging strips)
Metabox IV
6.24620
Metabox IV for
Of E 1229 Signal
Dimensions:
395 x 295 x 315 mm
Intermediate plate
For fixing on the
6.31503
ꢀ
base plate of
routers OFE 738 and
Of E 1229 Signal,
especially suited
for trimming edging
strips flush
FOR OFE 738 AND OFE 1229 SIGNAL
Order no.
with edges
Flexible shaft
6.30980
ꢀ
Suitable for
Circle-cutting guide
For cutting out
round openings,
6.31505
speeds of 7 500 to
30 000 rpm
ꢀ
ꢀ
ꢀ
Bearing-mounted
at both ends
Equipped with
collet for size 8 mm,
6.30979
moulding/routing
circular grooves,
rounding off corners,
etc., maximum circle
diameter 350 mm
Length: 1,3 m
Driving shaft: 8 mm
Collet bore: 8 mm
Weight: 0,8 kg
Template followers
Diameter: 9 mm
6.30105
6.30106
6.30118
6.30119
6.30120
6.30121
Diameter: 11 mm
Diameter: 17 mm
Diameter: 24 mm
Diameter: 27 mm
Diameter: 30 mm
Collets for flexible
shaft 30980
Collet bore: 3 mm
6.30976
6.30977
Collet bore: 6 mm
Collet bore: 1/4" (6.35 mm) 6.30978
Collet bore: 8 mm 6.30979
Download from Www.Somanuals.com. All Manuals Search And Download.
180 |
ACCESSORIES FOR ROUTERS
Order no.
Work benches
Flexible shaft
Suitable for speeds
6.27609
ꢀ
Order no.
of 20,000 to
30 000 rpm
Bearing-mounted
0910064304
GB
NEW
ꢀ
at both ends
ꢀ
Equipped with
collet for size 6 mm,
6.30714
ꢀ
To drive the flexible
shaft 6.27609 using
the router's motor
unit, the 8-mm collet
on the tool must be
replaced with the
6-mm collet 6.31945
Length: 1,3 m
Driving shaft: 6 mm
Collet bore: 6 mm
Weight: 0,8 kg
Flexo 500 universal table
ꢀ
For the stationary use of Metabo
jig saws, routers and circular saws
(when using appropriate accessories)
With foldable stand and height
adjustment
Sturdy steel construction and
a large table top made from
continuous strand casting
Collets for flexible
shaft 27609
Collet bore:
6 mm
Collet bore:
3 mm
Collet bore:
6.30714
6.30715
6.30716
6.27354
ꢀ
ꢀ
1/4" (6.35 mm)
Clamping stand
ꢀ
For clamping
the router motor
when working with
the flexible shafts
ꢀ
Locating
bore Ø 43 mm
Special accessories for Flexo 500
Router set
Order no.
Clamp
ꢀ
6.27107
For the secure
fitting on a
work table
0910064380
GB
For OFE 738, Of E 1229 Signal,
Of E 1812
Weight around 2.5 kg
NEW
NEW
FOR FME 737
Chip and dust extraction unit
Extraction at two points:
at chip box and at the top
on the guard
0910064371
GB
Order no.
ꢀ
Moulding/routing
attachment
for FME 737
6.31501
ꢀ
Clear view of the
ꢀ
work piece
With this moulding/
routing attachment,
router and grinder
motor FME 737
can be converted
into a router
ꢀ
Cleaner working
environment
Extraction nozzle Ø:
100 mm
Mitre guide
ꢀ
0910064410
GB
Length of rule: 250 mm
ꢀ
Angle area: +/- 60°
NEW
Download from Www.Somanuals.com. All Manuals Search And Download.
| 181
ROUTER BITS
PRECISION AT THE EXTREME.
Precision cuts require precision tooling. If you want the by machines that can produce repeat profiles time and
best from your router do not sacrifice on the cutters. time again. Metabo router bits will give you what you
Metabo cutters are of a high standard, manufactured need to perform clean, smooth, consistent cuts in safety.
by tooling specialists with many years of experience and
Structure and function of Metabo routers
Cutting tools
The specification of the cutting tool material by the manufacturer
is decisive for the quality of the cutter. Only top quality alloys of faultless
structural consistence can meet the demands for a long service life.
Selection and control of the cutting tools have high priority at Metabo.
HSS-tools
Ideal for use on soft woods, with reasonable life when processing
hard-wood. Good price to performance ratio.
HM-routers
Ideal for use on hardwoods, kitchen worktops, and laminate boards.
Various HM-qualities are processed and are matched to the cutters
main application. Metabo also takes great care in the structural
consistence of its hard-metal type cutters.
Shank
The drive shaft of the machine, collet and cutter shaft form a unit.
The more accurate the individual components, the higher the possible
accuracy of the router set.
To ensure a safe seat of the cutter in the collet, all cutter-shanks of the
Metabo cutters are ground to a tol. of -0.005 to -0.020 mm. The minimum
clamping length on each cutter shank is 20 mm and the shank-ends are
all chamfered.
max. 1.1 mm
D
➞
min. 0,6*D
➞
Machine prerequisites
Safety standards
Only good spindle bearing seats, the optimal
selection of clamping collets and the choice
of the correct cutting speeds (dependent on
spindle speed and cutter diameter) can bring
forth the advantages of top quality cutters.
SIt goes without saying that all Metabo
cutters comply with the German safety
standards (BG-test model: Limitation
of chip thickness and gap) allow the user
an optimal protection against injuries.
Download from Www.Somanuals.com. All Manuals Search And Download.
182 |
ROUTER BITS
Version
Dia-
meter
mm
Overall
length
mm
Usable Radius Angle Order
Router bits with 8 mm shank diameter
length
mm
no.
The router bits with two cutters are not suitable for
free-hand working with the router motor OFE 738
and the router and grinder motor FME 737
Beading bit
Version
Dia-
meter
mm
Overall
length
mm
Usable Radius Angle Order
length
mm
no.
Straight bit
HSS
15,5
40
10
5
6.30949
Beading bits
with pilot
HSS
HSS
HSS
HSS
HSS
HSS
HSS
HSS
3
4
5
6
45
6
6.30930
6.30931
6.30932
6.30933
6.30934
6.30935
6.30993
6.30994
6.30995
6.30996
6.30997
6.31630
6.31631
6.30936
6.30937
6.30938
6.30939
6.30940
6.31632
6.30941
6.31633
6.30942
6.31634
6.31635
6.31636
HSS
27,8
52
16
9,5
6.30974
47,5
48,5
48,5
51
48
52
9,5
11,5
16
19
20
20
20
20
20
20
11
Beading bits with
ball bearing
8
10
12
14
16
18
20
3
4
5
6
8
10
12
14
16
18
20
22
24
25
48
52
HSS
HSS
HSS
Carbide
Carbide
Carbide
Carbide
Rounding-over bits
with pilot
25,4
28,7
31,7
38,1
52,2
53,2
55,2
57,2
13,5
15
16,5
19,7
6,35
8
9,5
12,7
6.31645
6.31646
6.31647
6.31648
52
51
51
51
50
50
50
52
52
52
52
52
57
Carbide
Carbide
Carbide
Carbide
Carbide
Carbide
Carbide
Carbide
Carbide
Carbide
Carbide
Carbide
Carbide
Carbide
Core-box bit
11
11
19
20
20
20
20
20
20
20
25
20
10
HSS
HSS
17,5
23,8
50
52
14
16
6,35
9,5
6.30998
6.30948
Rounding-over bit
with ball bearing
15
57
Carbide
Carbide
Carbide
Carbide
25,4
28,7
31,75
38,1
51,2
12,7
15
15,88
19,7
6,35
8
9,53
12,7
6.31641
6.31642
6.31643
6.31644
54,63
59
Carbide
Carbide
HSS
9,5
12,7
8
45
40
7
9
12
9
4,75
6,35
4
6.31637
6.30947
6.30943
6.30944
V-groove bit
HSS
12,7
6,35
Core bit with pilot
HSS
HSS
Carbide
11
14
14
14
18
18
60
90
90
6.30957
6.30958
6.30959
48
48
Engraving bit
HSS
23,8
52
16
9,5
6.30955
Core bits with
ball bearing
Carbide
11
55
20
60
6.31640
Carbide
Carbide
31,7
38,1
51,95
57
14,3
16
9,5
12,7
6.31638
6.31639
Download from Www.Somanuals.com. All Manuals Search And Download.
| 183
ROUTER BITS
Version
Dia-
meter
mm
Overall
length
mm
Usable Radius Angle Order
Version
Dia-
meter
mm
Overall
length
mm
Usable Radius Angle Order
length
mm
no.
length
mm
no.
Dovetailing bits
Multi-radius ogee bits B
with pilot
HSS
Dovetailing bits
with relieving tooth
12,2
10
15
6.30952
HSS
29
16,5
3/4
6.30965
Multi-radius ogee bits
with ball bearing
Carbide
Carbide
31,7
38,1
53
59
12,7
19
4
6,35
6.31650
6.31651
Multi-radius ogee bits
with ball bearing
Carbide
38,1
54
17,5
6,35
6.31652
Hinge mortising bit
HSS
Carbide
14,3
14,3
13,5
13,5
15
15
6.30951
6.31649
60
Chamfering bits
with ball bearing
Carbide
Carbide
26
35
6.31657
6.31658
Slot cutter
Carbide
24
50
10
45
6.31655
Flush trimming bits
with ball bearing
Carbide
Carbide
Carbide
Carbide
Carbide
Carbide
40
40
40
40
40
40
1,5
2
2,5
3
3,5
4
6.23584
6.23585
6.23586
6.23587
6.23588
6.23589
Carbide
Rebating bits
with pilot
12,7
70
25,4
6.31654
Order
no.
Arbor for slot cutter
Shaft Ø: 8 mm
6.30966
HSS
Rebating bits
with ball bearing
23,8
11,5
12,7
6.30954
6.31653
Router bits with 12 mm shank diameter
Router bit with 2 cutters, with shaft diameter: 12 mm,
for router Of E 1812
Carbide
Straight panel bit
31,7
53
Version
Dia-
Overall
length
mm
Usable Radius Angle Order
meter
mm
length
mm
no.
Straight bit
Carbide
Multi-radius ogee bit
8
19
23
6.31656
6.30975
HSS
10
12
14
16
18
20
90
90
90
35
90
35
35
35
35
35
35
6.31610
6.31611
6.31612
6.31613
6.31614
6.31615
Carbide
Carbide
Carbide
Carbide
Carbide
HSS
30,1
7,2
Multi-radius ogee bits A
with pilot
HSS
29
16,5
3/4
6.30964
Download from Www.Somanuals.com. All Manuals Search And Download.
184 |
ROUTER BITS, MOUNTED POINTS
Version
Dia-
meter
mm
Overall
length
mm
Usable Radius Angle Order
Type
Version
Dia-
meter length
mm
Overall
Angle Order
no.
length
mm
no.
Core-box bit
Chamfering bit
HSS
10
16
6.23574
Router bits, fine toothed
Suitable for milling light alloys,
copper, brass, tin,
plastics, etc.
Carbide
Carbide
Beading bit
16
24
54
54
18
18
8
12
6.31627
6.31628
HSS
HSS
HSS
4,5
12
12
6.23575
6.23576
6.23577
Carbide
Carbide
21
27
12
15
5
8
6.31623
6.31624
HSS
12
12
6.23578
6.23579
50
Rounding-over bit with ball bearing
Dovetail bit
HSS
10
HSS
HSS
12
10
6.23580
6.23581
Carbide
Dovetailing bits
44,5
23
15,9
6.31622
Straight bit
Mounted points
Head Ø and
height
mm
Maximum
permissible
shaft
Order
no.
Carbide
Carbide
Hinge mortising bit
16
18
55
12
13
15
15
6.31625
6.31626
15
length l
mm
o
Mounted points made of
pink aluminium oxide,
shank diameter 6 mm
Ø 20 x 32
14
14
6.27411
6.27412
Ø 20 x 32
Ø 25 x 25
Ø 20 x 20
Carbide
Carbide
26
35
90
90
6.31620
6.31621
17
20
6.27413
6.27415
Router bits with 6 mm shank diameter
For free-hand working with the motor unit
of router OFE 738, and the router and
grinder motor FME 737 and the flexible shafts
Ø 20 x 32
Ø 16 x 32
Ø 10 x 25
14
20
20
6.27416
6.27417
6.27418
Type Version Dia- Overall
Angle Order
no.
meter length
mm
Router bits, medium-rough toothed
Suitable for milling light alloys, copper,
plastics, etc.
Mounted points made of
aluminium oxide,
shank diameter 6 mm
Ø 25 x 32
Ø 25 x 32
8
8
6.27419
6.27420
Straight bit,
rounded off
HSS
6
6.23570
Straight bit
Straight bit
Dovetail bit
HSS
HSS
HSS
6
6.23571
6.23572
10
12
10
6.23573
Download from Www.Somanuals.com. All Manuals Search And Download.
| 185
PAINT REMOVER/PLANERS
EQUIPMENT FEATURES
EQUIPMENT FEATURES
ꢀ
ꢀ
For the environmentally-friendly removal of paint and varnish
Robust planer with long planer base for a wide
from even wooden surfaces, such as stairs, doors and windows
range of use
ꢀ
ꢀ
Also suitable for processing untreated wood
Carbide planer blade
ꢀ
ꢀ
Up to 70 % time saving compared to conventional working
Easy blade change using standard planer blade
methods, e.g. using chemical paint strippers
cassette system
ꢀ
ꢀ
Ideal for cutting grooves and trimming edges
Variably adjustable planer depth and notch depth
ꢀ
ꢀ
Variably adjustable chip removal setting
Aluminum die cast and milled cut planer base
ꢀ
ꢀ
Sheathed, sturdy die cast aluminum gear housing
V-groove in front part of the planer base for
ꢀ
Universal motor with high capacity reserve
easy chamfering
ꢀ
ꢀ
Metabo S-automatic torque limiting clutch
Chip ejection to left and right (convertible)
ꢀ
ꢀ
4 reversible carbide blades with high tool life
External dust extraction outlet
ꢀ
ꢀ
Vibration-free and thereby fatigue-free operation
Spring-mounted strap on the planer base
ꢀ
External dust extraction outlet
for stopping machine
ꢀ
Metabo winding protection grid
LF 724 S
Ho 0882
710 Watt
Paint Remover
LF 724 S
800 Watt
Planer
Ho 0882
Comparative device characteristics
Torque
Cutting edge cycle
Maximum notch depth
Lateral milling height
Axial moulding/routing depth
Radial moulding/routing depth
Rated input power
Comparative device characteristics
Planing width
Adjustable planing depth
Maximum notch depth
No load speed
Rated input power
Output power
Rated load speed
2 Nm
80 mm
unlimited
28 mm
0 - 0,3 mm
0,15 mm
710 W
82 mm
0 - 3 mm
23 mm
12.000 /min
800 W
430 W
8.200 /min
290 mm
3,3 kg
Output power
No load speed
Rated load speed
Weight (without mains cable)
400 W
Length of planer base
Weight (without mains cable)
10.000 /min
7.200 /min
2,6 kg
Standard equipment
Reversible carbide planer
blade, guide fence,
groove depth stop,
extraction connector,
allen key
Standard equipment
4 reversible carbide blades,
extraction connector, adjusting
wrench with handle,
combo-spanner, carry case
Type
Order no.
LF 724 S
6.00724
Type
Order no.
Ho 0882
6.00882
ꢀ
ꢀ
Accessories for LF 724 S
Accessories for LF 724 S
Order
no.
Order
no.
Reversible carbide blades
Packing unit: 10
Packing unit: 4
Carry case
6.25449
6.31660
6.31720
Parallel guide/ripping fence
6.31865
Suction hose
6.31938
Hose length: 3,5 m
Suction hose Ø: 27 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
186 |
PLANERS
ACCESSORIES FOR HO 0882 AND HO E 0983
EQUIPMENT FEATURES
ꢀ
Handy and compact (not bigger than a hand planer)
Carbide planer blade
Planer blades
ꢀ
ꢀ
Easy blade change using standard planer blade cassette system
Order
no.
ꢀ
Variably adjustable planer depth and notch depth
Constamatic (C) full wave electronics for even planing results
ꢀ
ꢀ
Reduced speed for reduced noise during no load
Aluminum die cast and milled cut planer base
V-groove in front part of the planer base for easy chamfering
Guide fence for incline planing, tiltable up to 45°
External dust extraction outlet
Rotatable chip ejection support
Spring-mounted strap on the planer base
for stopping machine
Reversible carbide planer blade
Consisting of 2 reversible
carbide planer 82 mm blades,
suitable for most 82 mm wide
planers
Rustic conversion kit
Consisting of 2 HSS
reversible planer
blades with serrated
edge, 2 pressure pads
and 2-mm hexagon
spanner
6.30282
ꢀ
ꢀ
ꢀ
ꢀ
6.30565
ꢀ
ꢀ
HPHSS reversible
planer blade
6.30566
Consisting of 2 HSS
reversible planer
blades with serrated edge
(without pressure pads);
as spare
Order
no.
Chip bag
6.30888
For collecting small
amounts of shavings
Ho E 0983
Clamp bracket for planer
For stationary use of the
planer (as surface planer)
Clamp 6.27107 for
6.31599
900 Watt
Electronic Planer
Ho E 0983
fastening the stand
securely on a workbench
Comparative device characteristics
Planing width
82 mm
0 - 3 mm
20 mm
12.000 /min
900 W
Adjustable planing depth
Maximum notch depth
No load speed
Rated input power
Output power
Clamp
For the secure fitting
6.27107
ꢀ
on a work table
480 W
Rated load speed
Length of planer base
Weight (without mains cable)
11.000 /min
250 mm
3,1 kg
ACCESSORIES FOR HO 0882
Order
no.
Standard equipment
Reversible carbide planer blade,
inclinable guide fence, groove
depth stop, allen key
Guide fence
6.30991
Can be tilted outwards
up to 45° for incline
planing
(Standard equipment
for planer Ho E 0983)
Sheet steel carry case
6.31382
ACCESSORIES FOR HO E 0983
Order
no.
Sheet steel carry case
Planer Ho E 0983 can,
for the purposes of
6.31394
reversing and changing
the blades, be securely
placed in carry case
Type
Order no.
Ho E 0983
6.00983
Download from Www.Somanuals.com. All Manuals Search And Download.
| 187
|