Meridian Audio Universal Remote SRC 2010 User Manual

SRC-20 10  
Pr o g r a m m a b l e Re m o t e  
O pe r a t i o n m a n u a l  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
PREFACE..................................................................................................................I  
CHAPTER 1.............................................................................................................1  
Unpacking the Smart Remote Control ................................2  
Smart Remote Control features..........................................3  
Identifying components......................................................4  
CHAPTER 2.............................................................................................................7  
Power supply......................................................................7  
Inserting the batteries............................................................................8  
Power supply precautions....................................................................9  
Power supply tips...................................................................................9  
Battery low icon......................................................................................9  
The LCD............................................................................10  
Turning the Smart Remote Control on ............................................ 10  
Touch screen precautions.................................................................. 11  
The Information screen....................................................................... 12  
Smart Remote Control buttons..........................................13  
Direct access buttons.......................................................................... 13  
Touch screen buttons.......................................................................... 14  
CHAPTER 3.......................................................................................................... 15  
The main menu ................................................................15  
The device menu..............................................................16  
The setup menu................................................................17  
CHAPTER 4.......................................................................................................... 18  
Setting the clock...............................................................19  
Using the timer.................................................................20  
Timer view............................................................................................. 21  
Timer setup............................................................................................ 21  
Relabeling timers................................................................................. 22  
Using the program menu..................................................23  
Using the learning function............................................................... 23  
Clearing a key...................................................................................... 26  
Clearing a device ................................................................................ 27  
Clearing all devices............................................................................ 27  
Changing the LCD layout..................................................28  
Resizing or adding buttons on the main menu............................... 29  
Relabeling buttons on the main menu............................................. 33  
Deleting buttons on the main menu ................................................. 35  
Adjusting buttons on the device menu............................................. 36  
Relabeling device menu buttons.............................................................37  
Using recall.............................................................................................38  
Using macros....................................................................39  
Macro setup.......................................................................................... 40  
Relabeling a macro ............................................................................. 41  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Smart Remote Control User’s Manual  
Deleting a macro ................................................................................. 42  
The duplicate menu..........................................................43  
Making LCD adjustments..................................................44  
Adjusting the LCD contrast ............................................................... 45  
Adjusting the LCD backlight............................................................. 46  
Calibrating the LCD........................................................................... 47  
APPENDIX A........................................................................................................ 48  
Specifications...................................................................48  
APPENDIX B........................................................................................................ 50  
Troubleshooting................................................................50  
iv  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Figures  
Figure 1-1: Front view ..........................................................................................4  
Figure 1-2: Rear view............................................................................................6  
Figure 2-1: Inserting the batteries......................................................................8  
Figure 2-2: Turning the LCD on....................................................................... 10  
Figure 2-3: The Information Screen................................................................. 12  
Figure 2-4: Direct access buttons.................................................................... 13  
Figure 2-5: Touch screen buttons.................................................................... 14  
Figure 3-1: The main menu................................................................................ 15  
Figure 3-2: The TV device menu....................................................................... 16  
Figure 3-3: The setup menu............................................................................... 17  
Figure 4-1: The clock menu............................................................................... 19  
Figure 4-2: Timer list.......................................................................................... 20  
Figure 4-3: The timer menu ............................................................................... 20  
Figure 4-4: Setting up timer options............................................................... 21  
Figure 4-5: The program submenu................................................................... 23  
Figure 4-6: Using the Learning eye................................................................. 24  
Figure 4-7: Programming devices.................................................................... 25  
Figure 4-8: Programming the direct access buttons.................................... 25  
Figure 4-9: The adjust menu.............................................................................. 28  
Figure 4-10: Adjusting main menu buttons.................................................... 29  
Figure 4-11: Adjusting buttons on the device menu..................................... 36  
Figure 4-12: The macro list............................................................................... 39  
Figure 4-13: The macro menu........................................................................... 39  
Figure 4-14: The “other” menu........................................................................ 44  
Figure 4-15: Adjusting the contrast................................................................. 45  
Figure 4-16: Adjusting the backlight.............................................................. 46  
v
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1  
Introducing the Smart Remote Control  
Congratulations on the purchase of your SRC-2010 Smart Remote Control.  
The Smart Remote Control is a digital universal remote control that is easy to  
use and configure, enabling you to control all your IR equipped electronic de-  
vices.  
One feature of the Smart Remote Control is the touch screen control panel,  
which reduces the number of buttons on the device, making it easy for you to  
find the function you want. You can control up to 10 devices, including a  
VCR, DVD, amplifier, TV, and LD/VCD.  
The Smart Remote Control is easy to set up. With the “Learning eye” you  
can easily configure each device in your household or office. You can also eas-  
ily edit the device list, make changes to the LCD appearance, and adjust other  
settings. In addition, with the Macro function, you can initiate a chain of up  
to 25 commands with the touch of a button.  
Most universal remote controls have a set list of devices and static functions  
that don’t provide you with a lot of flexibility. The Smart Remote Control  
enables you to add and delete devices, relabel device buttons, and change the  
size and shape of LCD panel buttons. With this convenient and easy to use  
Smart Remote Control, you can control all your devices with one remote con-  
trol solution. No longer will you have to search for several different remotes!  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Smart Remote Control User’s Manual  
This manual will help you learn how to use all the ad-  
vanced features of the Smart Remote Control. It will not  
explain how to use the functions for your devices. Please  
refer to your device’s user manual for information related to  
your device.  
Unpacking the Smart Remote Con-  
trol  
After you have unpacked the Smart Remote Control, check the contents to  
make sure the following items are included.  
l
l
l
l
Smart Remote Control  
This user’s manual  
SLC-2081 Connecter  
Transmission cable  
If any of the above items are missing or appear damaged, contact your dealer  
immediately. Do not throw the shipping carton away in case you need to  
ship your Smart Remote Control.  
2
Faroudja  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introducing the Smart Remote Control  
Smart Remote Control features  
This section provides an overview of the key features of the Smart Remote  
Control. For more information on getting the most from these features, refer  
to Chapter 2.  
·
Large touch screen display with automatic backlighting for visibility  
in dim lighting  
·
Direct access buttons for accessing frequently used functions such as  
volume, channel, play, mute, and stop  
·
·
Macro button stores 12 macros—each macro can store 25 commands  
Controls up to 10 devices including LD/VCD, TV, Satellite, VCR and  
CD  
·
·
Popup information screen provides you with time, date, and battery  
charge information  
Uses the IR codes from your existing remote controls to quickly set  
up devices  
Faroudja  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Smart Remote Control User’s Manual  
Identifying components  
Please refer to the following illustrations to identify the components of the  
Smart Remote Control. This section provides an overview of the Smart Re-  
mote Control’s features and controls. Refer to Chapter 4 for a detailed  
description on operating and getting the most from these features.  
Figure 1-1: Front view  
4
Faroudja  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introducing the Smart Remote Control  
1. Light Sensor  
The Light Sensor detects the ambient light brightness or dimness  
and will turn on according to the setting.  
2. LCD  
The LCD display enables you to configure and operate your de-  
vices by touching the screen on the function you want. Touch the  
LCD panel to power on the Smart Remote Control. Refer to  
Chapter 2, The LCD for a description of the functions in this dis-  
play.  
3. Off button  
When the Smart Remote Control displays the main menu, press  
this button to turn the Smart Remote Control off. When a device  
menu is displayed, this button functions as a power-off button for  
the device.  
4. Device power button  
After you have configured your devices, press this button to  
power on the selected device.  
5. Device direct access buttons  
These buttons function differently according to the currently se-  
lected device. Use these buttons to change channels, raise and  
lower the volume, and play or stop tapes, CDs, VCDs, and other  
recorded media. For more information, please refer to page 13,  
Direct access buttons.  
6. Menu button  
Press the Menu button for three seconds to enter and exit the ad-  
vance setup function. Refer to Chapter 4 for details.  
7. Enter/mute button  
When the main menu is being accessed, press this button to con-  
firm your changes. If the main menu is not being accessed, press  
this button to mute the audio output of your device.  
8. Beep alert speaker opening  
Enables you to hear a beep when you press a button. You can dis-  
able the beep from the information screen. Refer to page 12, The  
Information screen.  
Faroudja  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Smart Remote Control User’s Manual  
The following illustration shows the rear of the Smart Remote Control.  
1. IR port  
2. Battery compartment  
3. Learning eye  
Figure 1-2: Rear view  
1. IR port  
Point the IR port at the IR receiver of the device you wish to oper-  
ate.  
2. Battery cover  
Remove this cover to replace the AAA batteries.  
3. Learning eye  
Point your device’s remote control at this eye to enable the Smart  
Remote Control to learn your remote control’s functions. For  
more information, refer to page 23, Using the learning function.  
6
Faroudja  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2  
Getting Started  
The previous chapter helped you to familiarize yourself with the various  
components and controls of the Smart Remote Control. This chapter will  
guide you through the steps for inserting the batteries and using the many fea-  
tures.  
Incorrect use of the batteries may cause them to  
burst or may cause leakage, which might damage  
the interior of the unit. Be sure to only use the cor-  
rect type of rechargeable Ni-MH batteries with the  
Smart Remote Control.  
Power supply  
The Smart Remote Control operates on three AAA batteries. The batteries  
are packed separately and must be inserted before you can operate the Smart  
Remote Control.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Smart Remote Control User’s Manual  
Inserting the batteries  
To insert the batteries, refer to the following illustration and instructions:  
1. Remove  
Ensure  
that you  
insert  
the batteries  
according to  
the marking  
inside the  
battery  
cover.  
battery case.  
2. Insert batteries.  
Figure 2-1: Inserting the batteries  
1. Locate the battery bay cover at the back of the Smart Remote Con-  
trol.  
2. Put your thumb in the battery cover slot and pull to remove the  
cover.  
3. Insert the batteries into the bay in the direction indicated in the bat-  
tery compartment.  
4. Replace the battery bay cover. You will hear it click into place.  
8
Faroudja  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Power supply precautions  
·
Be sure that the positive (+) and negative (-) polarities of each bat-  
tery match the polarities indicated in the compartment.  
·
·
Do not expose the batteries to excessive heat or flame.  
Keep the batteries out of the reach of children.  
Power supply tips  
·
When the batteries are weak, it will be harder to control devices from  
a distance.  
·
Recharge the batteries immediately when the battery low power-  
warning icon appears in the information screen.  
·
·
The Ni-MH batteries have to be charged for 10 hours before the first  
use  
If you choose to use the rechargeable Ni-MH batteries, please replace  
your batteries in time when they have been used for over two years  
or have been recharged over 500 times; there might be a danger of  
leakage.  
·
Device configuration data will be automatically saved when batteries  
are being replaced.  
Battery low icon  
When the battery charge is low, the battery low icon will be displayed in  
the information screen. You should recharge the batteries or replace the bat-  
teries with new ones immediately.  
Faroudja  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Smart Remote Control User’s Manual  
The LCD  
The LCD (liquid crystal display) touch screen enables you to configure and  
operate your Smart Remote Control with the touch of a finger.  
Turning the Smart Remote Control on  
To turn the Smart Remote Control on, simply press the Hardware Access  
Button  
with your finger:  
Figure 2-2: Turning the LCD on  
10  
Faroudja  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
You can also turn the Smart Remote Control on by pressing one of the direct  
access buttons.  
Touch screen precautions  
Please read the following instructions carefully:  
·
·
Tap the LCD touch screen gently; never use force.  
Do not use a pen or any sharp object to tap the screen. Otherwise,  
you might damage the surface. You can use a blunt object such as a  
pencil eraser or the cap of a pen.  
·
·
Keep the touch screen dry. Wipe off any spills immediately. The  
Smart Remote Control is not waterproof; never immerse it in liquid.  
Do not expose the Smart Remote Control to extreme temperatures.  
Keep it away from heat sources.  
·
·
·
Avoid dropping the Smart Remote Control.  
Do not drop anything on the touch screen.  
Clean the LCD touch screen with a soft cloth. If needed, dampen the  
cloth slightly before cleaning. Never use abrasives or cleaning solu-  
tions.  
Faroudja  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Smart Remote Control User’s Manual  
The Information screen  
The Information screen is displayed when you press the Information screen  
shortcut icon  
on the Smart Remote Control:  
Macro screen  
shortcut icon  
Information screen  
shortcut icon  
Main  
1999  
01- 01  
03:23  
Friday  
Date and  
time  
Press this  
icon to  
enable or  
disable the  
beep signal.  
Indicates  
battery  
charge  
level.  
Figure 2-3: The Information Screen  
If you want to view the Information Screen from any menu, press the Infor-  
mation icon at the top right. Press the Information icon again to exit the  
Information screen.  
The Information Screen shows the date, day, time, and the current battery  
charge level. You can also press the mute icon to mute the beep that you hear  
when you press buttons on the touch screen.  
12  
Faroudja  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Smart Remote Control buttons  
The Smart Remote Control has two sets of buttons for your convenience—  
direct access buttons and touch screen buttons.  
Direct access buttons  
The direct access buttons provide you with easy access to often-used func-  
tions such as volume and channel control, fast forward and fast reverse, play  
and stop.  
Figure 2-4: Direct access buttons  
Faroudja  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Smart Remote Control User’s Manual  
Touch screen buttons  
The touch screen buttons enable you to control your devices as you would  
with your remote control, set up macros, and configure your LCD panel the  
way you want.  
Figure 2-5: Touch screen buttons  
Using the touch screen is easy. Simply press the screen to activate a function.  
Press the arrow keys at the bottom of the touch screen to scroll between  
pages in the menu.  
14  
Faroudja  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3  
Operating the Smart Remote Control  
This chapter will tell you how to set up the Smart Remote Control, how to  
automatically configure devices, and how to use the advanced features such as  
the macros.  
Press the Hardware Access Button  
with your finger to turn the Smart  
Remote Control on. The first screen that you see is the main menu.  
The main menu  
The main menu displays a list of the devices currently available on the Smart  
Remote Control. You can delete, rename, and configure these devices using  
the learning function (see page 23, Using the learning function).  
Main  
Main  
LD/  
Sat  
VCD  
AUX  
2
AUX  
1
VCR  
DVD  
TV  
TUNER  
/ TAPE  
AMP  
CD  
Page 1  
Page 2  
Figure 3-1: The main menu  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Smart Remote Control User’s Manual  
Press the left or right arrows to scroll between the main menu pages.  
The device menu  
Each device has its own device menu that contains the buttons and controls  
peculiar to that device. Each device has four pages in the menu. You can  
scroll between the pages using the LCD left and right arrows.  
From the main menu, press the TV button to display the TV device menu:  
Device Header  
Press this header  
to return to the Main  
Menu.  
TV  
1
4
2
5
8
0
3
6
9
7
100  
1
Indicates  
menu  
page  
number  
Figure 3-2: The TV device menu  
You can return to Main menu by pressing both the Device Header or menu  
button. You can easily configure the devices using the learning function. Refer  
to page 23, Using the learning function).  
16  
Faroudja  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating the Smart Remote Control  
The setup menu  
The setup menu enables you to configure your Smart Remote Control.  
menu  
Press the menu button  
for three seconds. The setup menu appears:  
Setup  
Clock  
Timer  
Program  
Adjust  
Macro  
Duplicate  
Other  
Figure 3-3: The setup menu  
To scroll through the items on the setup menu, use the hardware channel up  
CH-  
mute  
CH+  
and channel down  
buttons. Press the enter (mute)  
button to en-  
menu  
ter an item submenu. Press the menu  
screen.  
button to return to the previous  
Refer to Chapter 4 for information on using the items in the setup menu.  
Faroudja  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 4  
Customizing the Smart Remote Control  
This chapter shows you how to customize your Smart Remote Control to  
make it fit your particular requirements, how to use the learning function to  
configure your devices, and how to set up the LCD panel to your specifica-  
tions.  
menu  
Press the menu button  
items are available:  
for three seconds to open the setup menu. Seven  
Clock  
Enables you to set the date and time.  
Timer  
Enables you to set a timer to run a device at a specified time.  
Program  
Enables you to transfer commands from your device’s remote  
control to buttons on the Smart Remote Control. You can  
also clear the settings for buttons and devices from this  
screen. You can also run macro setup from here and create  
macros for specific devices.  
Adjust  
Macro  
Dupl icate  
Other  
Enables you to resize, relabel, or delete LCD buttons.  
Enables you to record, label, and delete macros.  
Enables you to duplicate all data to another SRC-2010  
Enables you to adjust the LCD contrast and backlight, and to  
calibrate the LCD panel.  
Each item is covered in detail below:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing the Smart Remote Control  
Setting the clock  
The clock menu enables you to set the Smart Remote Control date and time.  
In the setup menu, scroll to clock and press enter. You see the following  
screen:  
Clock  
Blinking  
cursor  
1
1999  
01- 01  
03:23  
Friday  
0 1 2 3 4  
5 6 7 8 9  
Figure 4-1: The clock menu  
Change the number under the blinking cursor by pressing 0 to 9 on the LCD  
panel. After you enter a number, the cursor automatically moves to the next  
position. Press the right and left arrows on the LCD to move the cursor for-  
ward or backward.  
When you have finished making your adjustments, press enter.  
Faroudja  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Smart Remote Control User’s Manual  
Using the timer  
The timer function enables you to set up devices to turn on at specified times.  
In the setup menu, scroll to timer and press enter. You see a list of timers:  
Timer  
Timer 01  
Timer 02  
Timer 03  
Timer 04  
Figure 4-2: Timer list  
Use the channel up or channel down to scroll through the list. There are 12  
timers available. Select one of the timers and press enter. You see the follow-  
ing screen:  
Timer  
View  
Setup  
Relabel  
Figure 4-3: The timer menu  
Each item is covered below.  
20  
Faroudja  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing the Smart Remote Control  
Timer view  
View enables you to look at previously stored timer settings.  
Timer setup  
Setup enables you to setup a device function to go off at a specified time.  
Scroll to setup and press enter. The following screen appears:  
Timer  
Press here  
to select  
which day  
3:23  
0
or days you  
want the timer  
to run.  
Daily  
Press these  
numbers to  
enter the time  
you want the  
timer to run.  
0 1 2 3 4  
5 6 7 8 9  
Figure 4-4: Setting up timer options  
Enter the time and day or date that you want the timer to go off. When you  
have set the timer, press enter. The device menu appears. Open a device and  
then press the button of the function that you want to apply the timer set-  
tings to. For example, you can set your VCR to record a movie at a certain  
time, or you can set a macro to run at a specified time.  
Remarks: Selectable timer function  
Disable: disable current timer function/ Daily: Everyday/ Specific: Specified  
date/ Sunday: every Sunday/ Monday: every Monday/ Tuesday: every Tues-  
day/ Wednesday: every Wednesday/ Thursday: every Thursday/Friday: every  
Faroudja  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Smart Remote Control User’s Manual  
Friday/Saturday: Every Saturday/ Mon.~Fri.: Monday ~ Friday/ Mon.~Sat.:  
Monday ~ Saturday  
Relabeling timers  
You can easily relabel the timer names. Follow these instructions:  
1. From the timer menu (Figure 4-3) scroll to Relabel and press en-  
ter. The following screen appears:  
Timer 1. . . . . . . . . . . . . . .  
. . . . . . . . . . . . . . .. . . . . . .  
A B C D E F  
G
M
H I J K L  
P
R
N O  
Q
S T U V W X  
Y Z  
2. Enter the alphanumeric characters from the LCD screen. Press P1  
to access upper case letters, press P2 to access lower case letters,  
and press P3 to access numbers and special characters.  
3. Press enter when you have made your changes.  
22  
Faroudja  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing the Smart Remote Control  
Using the program menu  
The program menu enables you to set up devices, clear a configuration for a  
key, clear the configuration for a device, or clear the configuration for all de-  
vices.  
Program  
Learning  
Clr. Key  
Clr. Device  
Clr. All  
Figure 4-5: The program submenu  
Using the learning function  
This section will cover the Smart Remote Control learning function, which en-  
ables you to set up the controls for each device with your device’s remote  
control.  
When using the learning function, point your device’s remote control at the  
Smart Remote Control’s Learning eye as shown in the following illustration:  
Faroudja  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Smart Remote Control User’s Manual  
Figure 4-6: Using the Learning eye  
From the program menu (Figure 4-5), scroll to learning and press enter. You  
see the device buttons:  
24  
Faroudja  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing the Smart Remote Control  
Program  
Press this macro shortcut icon to  
open the macro recording function.  
Refer to page 39.  
This Macro button is designed for  
device menu. If you don’t need to  
set any Macro function in device  
menu, Please skip this function.  
AUX  
2
AUX  
1
TUNER  
/ TAPE  
CD  
In addition, from main menu’s  
MACRO 1 to MACRO 12, each  
MACRO button is independent.  
Figure 4-7: Programming devices  
Press the button of the device that you want to program. You see the follow-  
ing screen:  
Learn  
Figure 4-8: Programming the direct access buttons  
The buttons on the LCD correspond to the direct access buttons.  
Faroudja  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Smart Remote Control User’s Manual  
The filled button corresponds to the direct access power  
button. With the  
Learning eye, you can now map buttons on your device remote control to the  
direct access buttons on the Smart Remote Control. Follow these instruc-  
tions:  
1. Point your remote control at the Smart Remote Control’s Learning  
eye as shown in Figure 4-6.  
2. Press your remote control power button. When the screen dis-  
plays OK, release the power button. Refer to the following  
illustration:  
OK  
CH+  
3. The filled circle now corresponds to the channel up/play  
di-  
rect access button.  
4. Follow the preceding instructions to map the remaining buttons.  
You can also press a direct access button directly, and then map a remote con-  
trol function to the button.  
After you have finished configuring the direct access buttons, press the right  
arrow button on the LCD screen to move to the next page in the device menu.  
Follow the instructions above to map each button on your remote control to  
the corresponding button on the Smart Remote Control’s LCD screen.  
Clearing a key  
26  
Faroudja  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing the Smart Remote Control  
The clear key function enables you to erase the settings for a button in one of  
the device menus. Follow these instructions:  
1. In the program menu, scroll to Clr. Key and press enter. The list  
of devices appears.  
2. Press the device you want to configure.  
3. In the device menu, press the key you want to clear.  
4. Repeat steps 1 through 3 for all other keys you want to clear.  
Clearing a device  
The clear device function enables you to erase the commands for a device.  
Follow these instructions:  
1. In the program menu, scroll to Clr. Device and press enter. The  
list of devices appears.  
2. Press the device you want to delete commands for. You see the  
following screen:  
Program  
Sure ?  
(Y) Enter  
(N) Menu  
3. Press enter to delete the commands for the device. Press menu to  
cancel the deletion and return to the previous screen.  
Clearing all devices  
Faroudja  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Smart Remote Control User’s Manual  
The Clear All function enables you to erase the commands for all devices.  
Follow these instructions:  
1. In the program menu, scroll to Clear All and press enter.  
2. You are prompted to press the enter button to delete the settings  
for all devices, or press the menu button to cancel the changes and  
return to the previous screen.  
Changing the LCD layout  
The adjust menu enables you to resize, relabel, and delete buttons on the main  
menu and on the device menus.  
In the setup menu, scroll to adjust and press enter. You see the following  
screen:  
Adjust  
Main Menu  
Device  
Figure 4-9: The adjust menu  
Select Main Menu and press enter. You see the following screen:  
28  
Faroudja  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing the Smart Remote Control  
Adjust  
Resize/Add  
Relabel  
Delete  
Figure 4-10: Adjusting main menu buttons  
Each item is described below.  
Resizing or adding buttons on the main menu  
Follow the instructions below to resize buttons on the main menu.  
1. Scroll to Resize/Add and press enter. You see the main menu:  
Press this icon  
to toggle between  
Press this icon  
to undo an action.  
button resize and  
text edit functions.  
Main  
AUX  
2
AUX  
1
TUNER  
/ TAPE  
CD  
2. Press the button you want to resize.  
Faroudja  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Smart Remote Control User’s Manual  
Main  
AUX  
2
AUX  
1
TUN
/ TA
CD  
3. Press the place where you want the upper left corner of the but-  
ton to be. A black square appears where you pressed the LCD.  
Main  
AUX  
2
UX  
1
CD  
4. Press the place where you want the lower right corner of the  
button to be. A black square appears where you pressed the LCD.  
30  
Faroudja  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing the Smart Remote Control  
Main  
AUX  
2
AUX  
1
5. Press the space between the two black squares:  
Main  
AUX  
2
A
6. The button is resized:  
Faroudja  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Smart Remote Control User’s Manual  
Main  
AUX  
1
AUX  
2
TUNER  
/ TAPE  
CD  
Note the following points when resizing buttons:  
·
·
You cannot place the lower left corner above or to the  
left of the upper right corner.  
You cannot resize a button to where it will overlap an  
adjacent button.  
·
If you want to relabel a button, press the resize icon  
in the upper right corner. The icon changes to a text  
icon T . Press any of the device buttons, and relabel  
the button according to the instructions in the next sec-  
tion.  
·
If the total number of buttons on both main menu  
pages is less than ten, you can add a new device but-  
ton using the procedure for resizing buttons. The only  
difference is that you must select an empty space to  
place the left-hand corner and the right-hand corner.  
32  
Faroudja  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing the Smart Remote Control  
Relabeling buttons on the main menu  
You can easily relabel the buttons on the main menu. Follow these instruc-  
tions:  
1. From the adjust menu (Figure 4-9) select Main Menu and press  
enter.  
2. Scroll to Relabel and press enter again. You see the device list.  
3. Select a device to relabel. You see the following screen:  
TV . . . . . . . . . . . . . . . . .  
. . . . . . . . . . . . . . . . . . . . .  
A B C D E F  
G H I J K L  
M
P
R
N O  
Q
S T U V W X  
Y Z  
4. Enter the alphanumeric characters from the LCD screen. Press P1  
to access upper case letters, press P2 to access lower case letters,  
and press P3 to access numbers and special characters.  
5. Press enter when you have made your changes. You see the fol-  
lowing screen:  
Faroudja  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Smart Remote Control User’s Manual  
Adjust  
LD/VCD  
SAT  
VCR  
DVD  
AMP  
TV  
TUNER TAPE  
CD  
6. Select which device attributes you want applied to your button.  
When accessing your relabeled button, the menus will be the same  
as the device that you select here.  
34  
Faroudja  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing the Smart Remote Control  
Deleting buttons on the main menu  
You can easily delete buttons on the main menu. Follow these instructions:  
1. From the adjust menu (Figure 4-9) select Main Menu and press  
enter.  
2. Scroll to Delete and press enter again. You see the device list.  
3. Select a device button to delete. You see the following screen:  
Adjust  
Sure ?  
(Y) Enter  
(N) Menu  
4. Press the enter button if you want to delete settings for the but-  
ton. Press the menu button if you want to cancel the deletion and  
return to the previous screen.  
Faroudja  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Smart Remote Control User’s Manual  
Adjusting buttons on the device menu  
From the adjust menu (Figure 4-9) select Device and press enter. You see  
the following screen:  
Adjust  
Resize / Add  
Relabel  
Delete  
Recall  
Figure 4-11: Adjusting buttons on the device menu  
The procedures for resizing and deleting buttons on the device menu are the  
same as those for resizing and deleting buttons on the main menu. However,  
the relabeling procedures are slightly different; there is an option to replace the  
button’s text with an icon. Additionally, there is one more option in the ad-  
just device submenu—Recall.  
36  
Faroudja  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing the Smart Remote Control  
Relabeling device menu buttons  
You can easily relabel the buttons in device menus or choose icons to repre-  
sent the buttons. Follow these instructions:  
1. From the adjust menu (Figure 4-9) select Device and press enter.  
2. Scroll to Relabel and press enter again. You see the device list.  
3. Select a device to relabel, for example “CD”. You see the following  
screen:  
Adjust  
T
Scan Shuf.  
Edit  
Rept.  
Time  
1
Press the T icon to toggle between edit  
button text and resize modes.  
4. Press the button that you want to relabel, for example Scan. You  
see the following screen:  
Faroudja  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Smart Remote Control User’s Manual  
Scan . . . . . . . . . . . . . . . . .  
S
A B C D E F  
G
M
H I J K L  
P
R
N O  
Q
S T U V W X  
Y Z  
icon  
5. Note that there is one additional button—the Icon button. Press  
this button to display a list of icons:  
Scan . . . . . . . . . . . . . . . . .  
S
CH-  
CH+  
REC  
<
>
icon  
6. Press any of the buttons shown to replace the text “Scan” with an  
icon. Press < or > to scroll between the pages and display more  
icons.  
Using recall  
The recall option enables you to recall the button’s original settings. After  
you press recall, the device list appears. Press the device that you want to re-  
set.  
38  
Faroudja  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing the Smart Remote Control  
Using macros  
The macro feature enables you to store up to 20 commands for each macro.  
You can setup, relabel, and delete macros from the macro submenu. When  
you have created a macro, you will be able to run many commands by pushing  
only one button.  
From the setup menu, scroll to macro and press enter. You see a list of mac-  
ros:  
Macro  
Macro 01  
Macro 02  
Macro 03  
Macro 04  
Figure 4-12: The macro list  
Scroll to one of the macros in the list and press enter. You see the following  
screen:  
Macro  
Setup  
Relabel  
Delete  
Figure 4-13: The macro menu  
Each item is described below.  
Faroudja  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Smart Remote Control User’s Manual  
Macro setup  
Follow these instructions to set up a macro:  
1. From the macro menu, scroll to setup and press enter. The macro  
is now being recorded.  
2. Press the device button combination that you want to be recorded  
into the macro.  
If necessary, you can set a time delay between each command in  
the macro. In the upper right-hand corner of the screen, you see an  
hourglass icon 6. After pressing a command, press the hourglass  
icon to open the following screen:  
Macro  
1
Sec  
0.5  
Sec  
2
Sec  
3
Sec  
7
Sec  
5
Sec  
10  
Sec  
15  
Sec  
Press one of the listed durations (0.5 seconds to 15 seconds) if you  
want to have a time delay occur between device commands.  
3. When you have finished recording the macro press enter. You see  
the following screen:  
40  
Faroudja  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing the Smart Remote Control  
Macro  
Processing  
4. The macro has been recorded.  
To run the macro, press the macro shortcut icon  
M
in the upper left-hand  
corner of the screen, and then select the macro you want to run from the  
macro list.  
Relabeling a macro  
Follow these instructions to relabel a macro:  
1. In the setup menu, scroll to Macro and press enter. The list of  
macros appears.  
2. Scroll to the macro you want to rename and press enter. The  
macro menu appears:  
Macro  
Setup  
Relabel  
Delete  
3. Scroll to Relabel and press enter. You see the following screen:  
Faroudja  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Smart Remote Control User’s Manual  
Macro . 1. . . . . . . . . . . . .  
. . . . . . . .  
A B C D E F  
G
M
H I J K L  
P
R
N O  
Q
S T U V W X  
Y Z  
P1  
P2 P3  
4. Enter the alphanumeric characters from the LCD screen. Press P1  
to access upper case letters, press P2 to access lower case letters,  
and press P3 to access numbers and special characters.  
5. Press enter when you have made your changes.  
Deleting a macro  
Follow these instructions to delete a macro:  
1. In the setup menu, scroll to Macro and press enter. The list of  
macros appears.  
2. Scroll to the macro you want to delete and press enter. The macro  
menu appears:  
42  
Faroudja  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing the Smart Remote Control  
Macro  
Setup  
Relabel  
Delete  
3. Scroll to Delete and press enter. You will see the following screen:  
Macro  
Processing  
4. The macro information has been deleted.  
The macro delete function only deletes the macro-recorded  
data; it does not remove the macro name from the macro  
list.  
The duplicate menu  
Please refer to the “SLC-2081 Connecter User’s guide”.  
Faroudja  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Smart Remote Control User’s Manual  
Making LCD adjustments  
The other menu enables you to set the LCD contrast, adjust the backlight, and  
calibrate your Smart Remote Control.  
From the setup menu, scroll to Other and press enter. You see the following  
screen:  
Other  
Contrast  
Backlight  
Calibrate  
Figure 4-14: The “other” menu  
Each item is described below.  
44  
Faroudja  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing the Smart Remote Control  
Adjusting the LCD contrast  
Scroll to Contrast and press enter. You see the following screen:  
Other  
(
)
Press this  
arrow to  
decrease the  
LCD contrast.  
Press this  
arrow to  
increase the  
LCD contrast.  
Contrast  
Figure 4-15: Adjusting the contrast  
Press the right LCD arrow to increase the contrast. Press the left LCD arrow  
to decrease the contrast.  
Faroudja  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Smart Remote Control User’s Manual  
Adjusting the LCD backlight  
From the “other” menu, scroll to Backlight and press enter. You see the fol-  
lowing screen:  
Press to  
turn the  
backlight  
off and on.  
Back-Light  
- - Switch - -  
ON  
- - Level - - -  
Press to increase  
the backlight sensitivity  
level.  
Max : 99  
Set : 52  
Min : 00  
+
_
Indicates the current  
backlight sensitivity  
level.  
Press to decrease  
the backlight sensitivity  
level.  
- - Period - -  
05  
<
<
sec  
Press to increase  
Press to decrease  
the duration that  
the backlight stays  
on.  
the duration that  
the backlight stays  
on.  
Figure 4-16: Adjusting the backlight  
The backlight detects the ambient light brightness or dimness and will turn on  
according to the setting in this screen.  
Press and hold the Hardware Access Power button to automatically adjust the  
sensitivity level of the LCD panel to the ambient light. Alternatively you can  
press the + and – buttons to manually set the backlight sensitivity.  
·
Press + to increase the sensitivity of the backlight to the ambient  
lighting. A high number indicates that a greater decrease of the  
brightness in the ambient lighting will automatically switch the  
backlight on.  
·
Press – to decrease the sensitivity of the backlight to the ambient  
lighting. A low number indicates that a slight decrease of the  
brightness in the ambient lighting will automatically switch the  
backlight on.  
When you have finished adjusting the backlight, press enter to save your  
changes and return to the other menu.  
46  
Faroudja  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing the Smart Remote Control  
Calibrating the LCD  
Sometimes the LCD buttons become uncalibrated. When this happens, press-  
ing an LCD button will result in the adjacent button being pressed. In this  
instance, you should calibrate the LCD panel.  
From the other menu, scroll to Calibrate and press enter. You will see the  
calibrate screen. Press the edge of the screen next to the pen icon. The pen  
icon will move to the next edge. Continue pressing the edge of the screen next  
to the pen icon until all four edges of the screen have been processed.  
This concludes Chapter 4. The following appendixes provide specifications  
and some troubleshooting information.  
Faroudja  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix A  
Specifications  
SRC-2010  
Model  
3 x AAA alkaline batteries or Ni-MH re-  
chargeable batteries  
Battery  
210 (L) x 68 (W) x 24 (H) mm  
Dimensions  
Weight  
175.5g (batteries included)  
LCD turns off 25 minutes after last operation  
Power saving  
Battery consumption  
In use: 50mA / Standby: 280mA  
LCD off: 30mA  
Touch liquid crystal display  
Display  
Ten devices  
Remote capability  
Display types  
TV, DSS/SAT/cable, VCR, DVD, AMP,  
tape/tuner, CD, AUX  
8~ 10 M, 35 ~45  
10 KHz~125 KHz  
Flash memory  
EL backlight  
IR Range  
Acceptable frequency  
Memory  
Backlight  
User’s manual  
Attachments  
Accessories  
SLC-2081 Connecter,  
Transmission cable  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing the Smart Remote Control  
Faroudja  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B  
Troubleshooting  
If you have trouble configuring or operating the SRC-2010, first check that you have  
inserted the batteries correctly (page 8). Then check the items below.  
Symptom  
Remedy  
The SRC-2010  
doesn’t operate your  
device.  
·
·
Move closer to the device. The maximum  
operating distance is approximately 10 me-  
ters.  
Ensure that you are aiming the SRC-2010  
directly at the device and that there are no  
obstructions between the SRC-2010 and  
the device.  
·
·
·
Ensure that you have used the learning  
function (page 23) to configure the device.  
Make sure that the desired device on the  
SRC-2010 LCD panel has been selected.  
You cannot operate a  
device even after con-  
figuring the device  
using the learning  
function (page 23).  
Make sure that you have correctly “mapped”  
your device’s remote control to the SRC-  
2010.  
·
·
·
·
Clear the device data from the SRC-2010  
(page 26) and carry out the learning func-  
tion again (page 23).  
You see an “error”  
display during the  
learning procedure.  
Try the learning procedure again (page 23).  
You see an “error”  
display during opera-  
tion.  
The button that you pressed has not been  
configured. Configure the button using the  
learning procedure (page 23).  
The LCD screen  
turns off.  
The SRC-2010 is preset at the factory to  
automatically switch the LCD off after 25  
minutes if left unused. Just press the  
Hardware Access Button  
SRC-2010 back on again.  
to turn the  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Kunz Lawn Mower C60K H60T H60B E60B User Manual
La Crosse Technology Portable Radio WS 7014U User Manual
Lenovo Tablet 120038U User Manual
Life Fitness Heart Rate Monitor 95Le 95Li User Manual
Makita Sander 9227CB User Manual
Master Bilt Refrigerator ATMC 122SS User Manual
Mellerware Fan 35920A User Manual
Memorex Portable Radio VX 340 User Manual
Microsoft Printer PRO 1106EX User Manual
Middleby Cooking Systems Group Oven OP 4 8M User Manual