CLK-Class Cabriolet
Operator’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Our company and staff congratulate you on the purchase of your new Mercedes-Benz.
Your selection of our product is a demonstration of your trust in our company name. Further, it exemplifies your desire
to own an automobile that will be as easy as possible to operate and provide years of service.
Your Mercedes-Benz represents the efforts of many skilled engineers and craftsmen. To help assure your pleasure of
ownership, and for your safety and that of your passengers, we ask you to make a small investment of your time:
• Please read this manual carefully before putting it aside. Then return it to your vehicle where it will be handy for
your reference.
• Please abide by the recommendations contained in this manual. They are designed to acquaint you with the
operation of your Mercedes-Benz.
• Please abide by the warnings and cautions contained in this manual. They are designed to help improve the safety
of the vehicle operator and occupants.
We extend our best wishes for many miles of safe, pleasurable driving.
Mercedes-Benz USA, LLC
A DaimlerChrysler Company
Download from Www.Somanuals.com. All Manuals Search And Download.
Mechanical keys .......................... 30 BabySmartTM airbag deactivation
Introduction
system ...........................................59
Doors ..................................................31
Self-test BabySmartTM without
Product information .......................... 6
Operator’s manual ............................. 7
Where to find it ................................ 12
Reporting Safety Defects ................ 14
Central locking switch .................... 33
Automatic central locking .......... 34
Emergency unlocking in case of
accident ........................................ 34
Trunk ................................................. 35
Trunk lamp ....................................... 36
Trunk lid release switch ................ 37
Trunk lid emergency release ........ 38
Antitheft alarm system ................... 39
Tow-away alarm ............................... 40
Power seats, front .............................41
Front head restraints .................. 46
Roll bar and head restraints,
rear ............................................... 47
Backrest ............................................ 49
Multicontour seat ............................ 50
Heated seats ......................................51
special child seat installed .........59
Supplemental restraint system
(SRS) .............................................60
Emergency tensioning device
(ETD) .............................................60
Airbags .............................................. 61
Safety guidelines for the seat belt,
emergency tensioning device and
airbag .............................................67
Infant and child restraint
systems ..........................................69
Child seat anchors- "LATCH",
type ............................................... 71
Adjusting telescoping steering
column ..........................................73
Inside rear view mirror .................. 74
Antiglare night position .............. 74
Exterior rear view mirrors .............75
Instrument cluster ...........................78
Instruments and controls
Instruments and controls ............... 16
Center console .............................. 18
Overhead control panel ............... 19
Operation
Vehicle keys ......................................22
Start lock-out ....................................24
General notes on the central locking
system ...........................................24
Central locking system ...................25
Radio frequency and infrared
Seat belts and integrated restraint
system .......................................... 52
Seat belts .......................................... 53
remote control ..............................25
Opening and closing windows from
outside ...........................................29
Panic button ..................................30
Indicator lamps in the instrument
cluster ...........................................80
Seat belt nonusage warning
system ............................................ 54
Contents
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Multifunction steering wheel,
Combination switch .......................113 Parcel net in front passenger
multifunction display .................84
Trip and main odometer and sub
menu .............................................88
Audio systems ..................................89
Radio ..............................................89
CD player .......................................90
Cassette player ............................. 91
Telephone ..........................................92
Telephone book ............................92
Redialing .......................................94
Incoming call ................................96
Navigation system ............................97
Trip computer ...................................98
footwell .......................................152
Armrest, rear bench ......................152
Telephone, general ........................153
Cellular telephone .........................153
Garage door opener .......................154
Soft top ............................................158
Wind screen ....................................166
Roller blind (horizontal) ...............170
Roller blind (vertical) .................... 171
Hazard warning flasher switch ....115
Automatic climate control ............. 116
Display and controls .................. 118
Basic setting ................................ 118
Economy ....................................... 119
Special settings ........................... 119
Rear window defroster .............. 120
Air recirculation .........................121
Residual engine heat
utilization .....................................121
Dust filter .................................... 122
Audio and telephone, operation .. 123
Power windows .............................. 142
Interior lighting ............................. 145
Sun visors ....................................... 146
Illuminated vanity mirrors .......... 146
Interior ............................................ 147
Storage compartments, armrest and
cup holder .................................. 147
Glove box ..................................... 147
Ashtray .............................................150
Lighter ..............................................151
Cargo tie down rings .....................152
Driving
Control and operation of radio
transmitters ............................... 174
The first 1 000 miles
(1 500 km) .................................175
Maintenance ...................................175
Catalytic converter ........................ 176
Emission control ............................177
Tele Aid ...........................................178
Steering lock ...................................188
Starting and turning off the
Malfunction/warning message
memory ......................................100
Individual settings .........................102
Setting the audio volume ..............104
Flexible service system (FSS) ......105
Engine oil level indicator ..............108
Engine oil consumption ................109
Exterior lamp switch ......................110
Night security illumination ..........111
Headlamp cleaning system .......... 112
engine ......................................... 190
Automatic transmission ............... 191
Contents
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Parking brake .................................200
Driving instructions ......................201
Drive sensibly – save fuel .........201
Drinking and driving .................201
Pedals ...........................................201
Power assistance ........................202
Brakes ..........................................202
Driving off ...................................203
Parking ........................................204
Tires .............................................204
Snow chains ................................207
Winter driving instructions ......207
Standing water ...........................209
Passenger compartment ...........209
Traveling abroad ........................209
Cruise control ................................. 210
Brake assist system (BAS) ............ 212
Antilock brake system (ABS) ....... 214
Electronic stability program
Malfunction and warning messages
in the multifunction display ...230
DISPLAY DEFECTIVE (engine
control unit) ................................231
DISPLAY DEFECTIVE (several
systems) .......................................231
BATTERY/ALTERNATOR ...........232
ABS-SYSTEM ...............................233
BRAKE ASSIST ...........................233
BRAKE LINING WEAR ..............234
BRAKE FLUID .............................234
PARKING BRAKE .......................235
ENGINE FAN ...............................235
COOLANT (coolant level) ..........236
COOLANT TEMP. (coolant
temperature) ...............................237
LIGHTING SYSTEM ....................238
LIGHT SENSOR ...........................239
STEER. WHEEL ADJUST. ...........239
ENGINE OIL LEVEL ...................240
ELEC. STABIL. PROG. (Electronic
stability program) ......................241
Instrument cluster display
Malfunction and indicator lamps in
the instrument cluster ............. 224
On-board diagnostic system Check
engine malfunction indicator
lamp ............................................. 224
Brake warning lamp .................. 225
Supplemental restraint system
(SRS) indicator lamp ................. 226
Fuel reserve and fuel cap
placement warning ................... 226
Electronic stability program (ESP)
— warning lamp .......................... 227
BAS/ESP malfunction indicator
lamp ............................................. 227
ABS malfunction indicator
lamp ............................................. 227
Telescoping steering column –
indicator lamp ............................228
Seat belt warning lamp ............. 228
Malfunction and indicator lamps in
the center console .................... 228
AIRBAG OFF indicator lamp ....228
Roll bar warning lamp .............. 229
(ESP) ........................................... 216
What you should know at the gas
station .........................................220
Check regularly and before a long
trip ...............................................222
REMOVE KEY .............................241
WASHER FLUID .........................242
Contents
3
Download from Www.Somanuals.com. All Manuals Search And Download.
TELE AID .....................................243 Spare wheel ....................................260
Spare wheel bolts .......................... 260
Vehicle care
Cleaning and care of the
Practical hints
Spare wheel bolts ......................260
Spare wheel ....................................260
Changing wheels ...........................263
Tire inflation pressure ................. 268
Battery ............................................. 270
Jump starting ..................................271
Towing the vehicle ........................ 273
Exterior lamps ............................... 277
Headlamp assembly .................. 278
Taillamp assemblies .................. 280
Adjusting headlamp aim .............. 282
Changing batteries in the electronic
key ..............................................285
Synchronizing remote
control ........................................287
Raising soft top manually ............ 288
Antenna ..........................................295
vehicle ........................................300
Power washer ..............................301
Paintwork, painted body
components .................................301
Engine cleaning ..........................302
Tar stains .....................................302
Vehicle washing .........................302
Ornamental moldings ................302
Headlamps, taillamps, turn signal
lenses ...........................................303
Window cleaning .......................303
Plastic and rubber parts ............303
Wiper blade .................................303
Light alloy wheels ......................303
Instrument cluster .....................304
First aid kit .....................................246
Shelf below rear window ..............246
Stowing things in the vehicle ......246
Luggage cover .................................246
Fuses ................................................248
Hood .................................................250
Checking engine oil level .............252
Automatic transmission fluid
level .............................................253
Coolant level ...................................253
Adding coolant ...........................254
Windshield washer / headlamp
cleaning system .........................255
Windshield and headlamp washer
fluid mixing ratio .......................255
Spare wheel, vehicle tools, storage
compartment .............................256
Vehicle jack .....................................257
Wheels .............................................258
Steering wheel and gear selector
lever ..............................................304
Cup holder ...................................304
Seat belts .....................................304
Headliner .....................................304
Upholstery ...................................305
Manual release for fuel filler
flap ..............................................296
Replacing wiper blade insert ...... 296
Tire replacement ........................258
Rotating wheels ..........................259
Contents
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Hard plastic trim items .............305
Plastic and rubber parts ............305
Wind screen ...............................305
Rubber weatherstrip .................305
Soft top .........................................306
Technical data
Index
Spare parts service .......................308 Index ................................................324
Warranty coverage ........................ 308
Identification labels ......................309
Layout of poly-V-belt drive ............310
Technical data .................................311
Fuels, coolants, lubricants etc. –
capacities ....................................316
Engine oils .......................................318
Engine oil additives .......................318
Air conditioner refrigerant ...........318
Brake fluid .......................................318
Premium unleaded gasoline .........319
Fuel requirements .........................319
Gasoline additives ......................... 320
Coolants ..........................................320
Consumer information ................. 322
Contents
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
6
Product information
Kindly observe the following in your own best interest:
We recommend using Mercedes-Benz original parts as well as conversion parts and accessories
explicitly approved by us for your vehicle model.
We have tested these parts to determine their reliability, safety and their special
suitability for Mercedes-Benz vehicles.
We are unable to make an assessment for other products and therefore cannot be held responsible
for them, even if in individual cases an official approval or authorization by governmental or other
agencies should exist. Use of such parts and accessories could adversely affect the safety, performance
or reliability of your vehicle. Please do not use them.
Mercedes-Benz original parts as well as conversion parts and accessories approved by us are available
at your authorized Mercedes-Benz Center where you will receive comprehensive information, also on
permissible technical modifications, and where proper installation will be performed.
Download from Www.Somanuals.com. All Manuals Search And Download.
Operator’s manual
This Operator’s Manual contains a great deal of useful information. We urge you to read it carefully and familiarize
yourself with the vehicle before driving.
For your own safety and longer service life of the vehicle, we urge you to follow the instructions and warnings
contained in this manual. Ignoring them could result in damage to the vehicle or personal injury to you or others.
Vehicle damage caused by failure to follow instructions is not covered by the Mercedes-Benz Limited Warranty.
Your vehicle may have some or all of the equipment described in this manual. Therefore, you may find explanations
for optional equipment not installed in your vehicle. If you have any questions about the operation of any equipment,
your authorized Mercedes-Benz Center will be glad to demonstrate the proper procedures.
Service and warranty information
The Service and Warranty Information Booklet contains detailed information about the warranties covering your
Mercedes-Benz, including:
• New Car Limited Warranty,
• Emission System Warranty,
• Emission Performance Warranty,
• California, Maine, Massachusetts, and Vermont Emission Control System Warranty
(California, Maine, Massachusetts, and Vermont only),
• State Warranty Enforcement Laws (Lemon Laws).
Introduction
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
8
Important notice for California retail buyers and lessees of Mercedes-Benz automobiles
Under California law you may be entitled to a replacement of your vehicle or a refund of the purchase price or lease
price, if Mercedes-Benz USA, LLC and/or its authorized repair or service facilities fail to fix one ore more substantial
defects or malfunctions in the vehicle that are covered by its express warranty after a reasonable number of repair
attempts. During the period of 18 months from original delivery of the vehicle or the accumulation of 18 000 miles on
the odometer of the vehicle, whichever occurs first, a reasonable number of repair attempts is presumed for a retail
buyer or lessee if one or more of the following occurs: (1) the same substantial defect or malfunction results in a
condition that is likely to cause death or serious bodily injury if the vehicle is driven, that defect or malfunction has
been subject to repair two or more times, and you have directly notified Mercedes-Benz USA, LLC in writing of the
need for its repair, (2) the same substantial defect or malfunction of a less serious nature than category (1) has been
subject to repair four or more times and you have directly notified us in writing of the need for its repair, or (3) the
vehicle is out of service by reason of repair of the same or different substantial defects or malfunctions for a
cumulative total of more than 30 calender days. Written notification should be sent to us, not a dealer, at Mercedes-
Benz USA, LLC, Customer Assistance Center, One Mercedes Drive, Montvale, NJ 07645-0350.
Maintenance
The Service Booklet describes all the necessary maintenance work which should be performed at regular intervals.
Always have the Service Booklet with you when you take the vehicle to your authorized Mercedes-Benz Center for
service. The service advisor will record each service in the booklet for you.
Download from Www.Somanuals.com. All Manuals Search And Download.
Roadside Assistance
The Mercedes-Benz Roadside Assistance Program provides factory trained technical help in the event of a breakdown.
Calls to the toll-free Roadside Assistance number:
1-800-FOR-MERCedes (in the USA)
1-800-387-0100 (in Canada)
will be answered by Mercedes-Benz Customer Assistance Representatives 24 hours a day, 365 days a year.
For additional information refer to the Mercedes-Benz Roadside Assistance Program brochure in your glove box.
Change of address or ownership
If you change your address, be sure to send in the “Change of Address Notice” found in the Service and Warranty
Information Booklet, or simply call the Mercedes-Benz Customer Assistance Center (in the USA) at 1-800-
FOR-MERCedes, or Customer Service (in Canada) at 1-800-387-0100. It is in your own interest that we can contact you
should the need arise.
If you sell your Mercedes, please leave all literature with the vehicle to make it available to the next operator.
If you bought this vehicle used, be sure to send in the “Notice of Purchase of Used Car” found in the Service and
Warranty Information Booklet, or call the Mercedes-Benz Customer Assistance Center (in the USA) at
1-800-FOR-MERCedes, or Customer Service (in Canada) at 1-800-387-0100.
Introduction
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
10
Operating your vehicle outside the USA or Canada
If you plan to operate your vehicle in foreign countries, please be aware that:
• Service facilities or replacement parts may not be readily available,
• unleaded gasoline for vehicles with catalytic converters may not be available; the use of leaded fuels will damage
the catalysts,
• gasoline may have a considerably lower octane rating, and improper fuel can cause engine damage.
Certain Mercedes-Benz models are available for delivery in Europe under our European Delivery Program. For details,
consult your authorized Mercedes-Benz Center or write to:
In the USA:
In Canada:
Mercedes-Benz USA, LLC
European Delivery Department
One Mercedes Drive
Mercedes-Benz Canada, Inc.
European Delivery Department
849 Eglinton Avenue East
Toronto, Ontario M4G 2L5
Montvale, NJ 07645-0350
Download from Www.Somanuals.com. All Manuals Search And Download.
We continuously strive to improve our product, and ask for your understanding that we reserve the right to make
changes in design and equipment. Therefore, information, illustrations and descriptions in this Operator’s Manual
might differ from your vehicle.
Optional equipment is also described in this manual, including operating instructions wherever necessary. Since they
are special-order items, the descriptions and illustrations herein may vary slightly from the actual equipment of your
vehicle.
If there are any equipment details that are not shown or described in this Operator’s Manual, your authorized
Mercedes-Benz Center will be glad to inform you of correct care and operating procedures.
The Operator’s Manual and Service Booklet are important documents and should be kept with the vehicle.
Introduction
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
12
Where to find it
The Operator’s Manual is divided into eight sections:
• Instruments and controls: An overview of all the controls that can be operated from the driver’s seat.
• Operation: Information on the vehicle’s equipment and its operation.
• Driving: Important information on driving.
• Instrument cluster display: Displays and indicator lamps on the instrument cluster with brief instructions.
• Practical hints: Assistance and instructions in the event of an emergency.
• Car care: Instructions on caring for your vehicle.
• Technical data: All the important technical data for your vehicle as well as consumer information such as fuels,
coolants, lubricants etc. is contained here.
• Index: Key terms to help you find a topic quickly.
Other documents may also be supplied, depending on your vehicle’s equipment.
Explanation of color used:
Warning notices for the protection of yourself and
others appear on red background.
Download from Www.Somanuals.com. All Manuals Search And Download.
Problems with your vehicle
If you should experience a problem with your vehicle, particularly one that you believe may affect
its safe operation, we urge you to immediately contact your authorized Mercedes-Benz Center to
have the problem diagnosed and corrected if required. If the matter is not handled to your
satisfaction, please discuss the problem with the Mercedes-Benz Center management, or if
necessary contact us at the following addresses:
In the USA: Customer Assistance Center
Mercedes-Benz USA, LLC
One Mercedes Drive
Montvale, NJ 07645-0350
In Canada:
Customer Relations Department
Mercedes-Benz Canada, Inc.
849 Eglinton Avenue East
Toronto, Ontario, M4G 2L5
Introduction
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
14
For the USA only:
The following text is published as required of manufacturers under Title 49, Code of U.S. Federal Regulations,
Part 575 pursuant to the “National Traffic and Motor Vehicle Safety Act of 1966”.
Reporting Safety Defects
If you believe that your vehicle has a defect which could cause a crash or could cause injury or
death, you should immediately inform the National Highway Traffic Safety Administration
(NHTSA) in addition to notifying Mercedes-Benz USA, LLC.
If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety
defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA
cannot become involved in individual problems between you, your dealer, or Mercedes-Benz USA,
LLC.
To contact NHTSA, you may either call the Auto Safety Hotline toll-free at 1-888-327-4236 or write
to: NHTSA, U.S. Department of Transportation, Washington, D.C. 20590. You can also obtain other
information about motor vehicle safety from the Hotline.
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments and controls
Instruments and controls ............... 16
Center console .............................. 18
Overhead control panel ............... 19
Contents – Instruments and controls
15
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Instruments and controls
Instruments and controls
16
Download from Www.Somanuals.com. All Manuals Search And Download.
For more detailed descriptions see Index on page 324.
13 Center air outlets, adjustable
For adjustment of air outlets, refer to automatic climate
control, see page 116.
14 Air volume control for center air outlets
15 Left front seat heater switch, see page 51
16 Headlamp washer switch, see page 112
1 Side air outlet, adjustable
2 Air volume control for side air outlet
3 Exterior lamp switch, see page 110
4 Parking brake release, see page 200
5 Parking brake pedal, see page 200
6 Hood lock release, see page 250
7 Combination switch, see page 113
8 Cruise control switch, see page 210
17 Roll bar switch, see page 48
Roll bar warning lamp, see page 229
18 Hazard warning flasher switch, see page 115
19 Central locking switch, see page 33
20 Switch for tow-away alarm, see page 40
Indicator lamp for antitheft alarm system, see
page 39
21 Right front seat heater switch, see page 51
9 Multifunction steering wheel, see page 84
Horn (with electronic key in steering lock
position 1 or 2)
22 Automatic climate control, see page 116
Rear window defroster switch, see page 120
23 Glove box (illuminated with electronic key in
10 Instrument cluster, see page 78
steering lock position 1 or 2), see page 147
11 Voice control system lever, see separate operating
24 Audio system, see page 123
25 Storage compartment
instructions
12 Steering lock with ignition/starter
26 Ashtray with lighter, see page 150
switch, see page 188
Instruments and controls
17
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Instruments and controls
Center console
18
1 Soft top switch, see page 158
2 ESP control switch, see page 218
3 Program mode selector switch, see page 198
4 Left power window switch (front), see page 142
5 Right power window switch (front), see page 142
6 Left power window switch (rear), see page 142
7 Trunk lid release switch, see page 37
1
3
ESP
ESP
2
4
8 Mirror adjustment switch, see page 75
9 Right power window switch (rear), see page 142
10 AIRBAG OFF indicator lamp, see page 228
5
10
9
7
8
6
P68.10-2555-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Overhead control panel
1 Tele Aid (emergency call system), see page 178
2 Interior lighting, see page 145
1
3 Hands-free microphone for Tele Aid, telephone and
voice control system.
4 Rear view mirror, see page 74
2
5 Garage door opener, see page 154
3
4
5
Instruments and controls
19
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
20
Power seats, front .............................41
Front head restraints .................. 46
Roll bar and head restraints,
Infant and child restraint
systems ..........................................69
Child seat anchors- "LATCH",
type ............................................... 71
Adjusting telescoping steering
column ..........................................73
Inside rear view mirror .................. 74
Antiglare night position .............. 74
Exterior rear view mirrors .............75
Instrument cluster ...........................78
Indicator lamps in the instrument
cluster ...........................................80
Multifunction steering wheel,
multifunction display .................84
Trip and main odometer and sub
menu .............................................88
Audio systems ..................................89
Radio ..............................................89
CD player .......................................90
Cassette player ............................. 91
Telephone ..........................................92
Telephone book ............................92
Redialing .......................................94
Incoming call ................................96
Operation
Vehicle keys ......................................22
Start lock-out ....................................24
General notes on the central locking
system ...........................................24
Central locking system ...................25
Radio frequency and infrared
remote control ..............................25
Opening and closing windows from
outside ...........................................29
rear ............................................... 47
Backrest ............................................ 49
Multicontour seat ............................ 50
Heated seats ......................................51
Seat belts and integrated restraint
system .......................................... 52
Seat belts .......................................... 53
Seat belt nonusage warning
Panic button ..................................30
system ............................................ 54
BabySmartTM airbag deactivation
system .......................................... 59
Mechanical keys ...........................30
Doors .................................................. 31
Central locking switch ....................33
Automatic central locking ..........34
Emergency unlocking in case of
accident ........................................34
Trunk .................................................35
Trunk lamp .......................................36
Trunk lid release switch .................37
Self-test BabySmartTM without
special child seat installed ......... 59
Supplemental restraint system
(SRS) ............................................. 60
Emergency tensioning device
(ETD) ............................................ 60
Airbags ...............................................61
Safety guidelines for the seat belt,
emergency tensioning device and
airbag ............................................. 67
Trunk lid emergency release .........38
Antitheft alarm system ...................39
Tow-away alarm ................................40
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigation system ............................97
Trip computer ...................................98
Malfunction/warning message
Economy ....................................... 119 Ashtray ............................................150
Special settings ........................... 119 Lighter ............................................. 151
Rear window defroster .............. 120 Cargo tie down rings .....................152
Air recirculation .........................121 Parcel net in front passenger
memory ......................................100
Individual settings .........................102
Setting the audio volume ..............104
Flexible service system (FSS) ......105
footwell .......................................152
utilization .....................................121 Armrest, rear bench ......................152
Dust filter .................................... 122 Telephone, general ........................153
Residual engine heat
Engine oil level indicator ..............108 Audio and telephone, operation .. 123 Cellular telephone .........................153
Engine oil consumption ................109 Power windows .............................. 142 Garage door opener .......................154
Exterior lamp switch ......................110 Interior lighting ............................. 145 Soft top ............................................158
Night security illumination ..........111 Sun visors ....................................... 146 Wind screen ....................................166
Headlamp cleaning system .......... 112 Illuminated vanity mirrors .......... 146 Roller blind (horizontal) ...............170
Combination switch .......................113 Interior ............................................ 147 Roller blind (vertical) .................... 171
Hazard warning flasher switch ....115 Storage compartments, armrest and
cup holder .................................. 147
Glove box ..................................... 147
Automatic climate control .............116
Display and controls ...................118
Basic setting .................................118
21
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Warning!
Car care
Index
Central locking system
Vehicle keys
22
Included with your vehicle are 2 electronic keys with
integrated radio frequency and infrared remote controls
plus removable mechanical key.
When leaving the vehicle, always remove the
electronic key from the steering lock, and lock your
vehicle. Do not leave children unattended in the
vehicle, or with access to an unlocked vehicle.
Unsupervised use of vehicle equipment may cause
an accident and/or serious personal injury.
The locking tabs for the mechanical key portion of the
two electronic keys are a different color to help
distinguish it.
Download from Www.Somanuals.com. All Manuals Search And Download.
Electronic key
When using the mechanical key (2) for lock operations,
it can be removed by sliding it out of the remote control.
To do so, move locking tab (3) to the right and slide the
mechanical key (2) in direction of arrow (4).
The remote control transmitter is located in the
electronic key.
1
The infrared receivers are located in the door handles.
Obtaining replacement keys
3
Your vehicle is equipped with a theft deterrent locking
system requiring a special key manufacturing process.
For security reasons, replacement keys can only be
obtained from your authorized Mercedes-Benz Center.
2
4
P80.35-2031-26
The electronic key has an integrated radio frequency
and infrared remote control, plus removable mechanical
key.
The remote control (1) operates all locks on the vehicle.
The mechanical key (2) works only in the driver’s door,
trunk, and glove box lock.
Central locking system
23
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Central locking system
Start lock-out
24
General notes on the central locking system
If the electronic key is inserted in the steering lock, the
vehicle cannot be locked or unlocked with the remote
control.
Important!
Removing the electronic key from the steering lock
activates the start lock-out. The engine cannot be
started.
If the vehicle cannot be locked or unlocked:
• Aim transmitter eye at a receiver of either door
handle. Check the batteries of the electronic key, see
page 285, or synchronize the remote control, see
page 287.
Inserting the electronic key in the steering lock
deactivates the start lock-out.
Note:
• Use the mechanical key to unlock the driver’s door.
To start the engine, insert the electronic key in the
steering lock. There could be a slight delay until the
electronic key can be turned in the steering lock.
In case the engine cannot be started (vehicle’s battery is
in order), the system is not operational. Contact an
authorized Mercedes-Benz Center or call 1-800-FOR-
MERCedes (in the USA) or 1-800-387-0100 (in Canada).
Important!
When unlocking the driver’s door with the mechanical
key, the exterior lamps will flash and the alarm will
sound.
To cancel the alarm, insert the electronic key in the
steering lock or press button Œ or ‹ on the
electronic key.
Download from Www.Somanuals.com. All Manuals Search And Download.
Central locking system
4
Radio frequency and infrared remote control
3
The electronic key has an integrated radio frequency
and infrared remote control.
2
1
Due to the extended operational range of the remote
control, it could be possible to unintentionally lock or
unlock the vehicle by pressing the transmit button. If
one of the transmit buttons is pressed, the battery check
lamp lights up briefly – indicating that the batteries are
in order. See page 285 for checking batteries.
5
P80.35-2032-26
The vehicle doors, trunk and fuel filler flap can be
centrally locked and unlocked via remote control.
1 Transmit button
‹ Locking
Opening and closing the windows remotely can only be
done with the infrared portion of the remote control.
Aim transmitter eye at a receiver (6 or 7), press and
hold transmit button Œ or ‹.
ΠUnlocking
Š Opening trunk
If the electronic key is inserted in steering lock, the
vehicle cannot be locked or unlocked with the remote
control.
2 Lamp for battery check (see page 285 for changing
batteries if it does not light up briefly)
3 PANIC button
4 Transmitter eye
5 Locking tab for mechanical key
Central locking system
25
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Central locking system
26
6
7
P80.30-2081-26
P80.30-2082-20
6 Infrared receiver in driver’s door handle
7 Infrared receiver in passenger door handle
Download from Www.Somanuals.com. All Manuals Search And Download.
Locking and unlocking with remote control
If within 40 seconds of unlocking with the remote
control, neither door nor trunk is opened, the electronic
key is not inserted in the steering lock, or the central
locking switch is not activated, the vehicle will
automatically lock.
Unlocking:
Press transmit button Œ. All turn signal lamps blink
once to indicate that the vehicle is unlocked.
The remote control can be programmed for two kinds of
unlocking modes (see below):
Locking:
Press transmit button ‹ once. All turn signal lamps
blink three times to indicate that the vehicle is locked.
Selective unlocking mode –
Press transmit button Œ once to unlock driver’s door
and fuel filler flap.
Press transmit button Πtwice to unlock both doors,
fuel filler flap, and trunk.
If they do not blink three times, a door or trunk is not
properly closed.
Note:
Global unlocking mode –
Press transmit button Πonce to unlock both doors,
fuel filler flap, and trunk.
If the vehicle cannot be locked or unlocked by pressing
the transmit button, then it may be necessary to change
the batteries in the electronic key (if ok, battery check
lamp in electronic key will light briefly when pressing
transmit button) or to synchronize the remote control,
see pages 285 and 287.
Notes:
The presently active unlocking mode (selective or
global) can only be determined by unlocking the vehicle
with the remote control (see below for changing mode).
Central locking system
27
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Important!
Car care
Index
Central locking system
28
Choosing global or selective mode on remote control
Press and hold transmit buttons ‹ and Œ
simultaneously for approx. 6 seconds to reprogram the
remote control. Battery check lamp will blink two times
indicating the completed mode change.
Do not place remote control in trunk since trunk is
locked when the lid is closed if the vehicle is centrally
locked.
Opening the trunk
Press transmit button Š until trunk lid is released.
A minimum height clearance of 5.9 ft. (1.8 m) is
required to open the trunk lid.
Download from Www.Somanuals.com. All Manuals Search And Download.
Opening and closing windows from outside
Note:
If the windows cannot be operated automatically by
pressing the transmit button of the remote control then
it may be necessary to change the batteries in the
electronic key (if ok, battery check lamp in electronic
key will light briefly when pressing transmit button), or
to synchronize the remote control, see page 285
and 287.
Aim transmitter eye of remote control at a door receiver.
To open:
Continue to press transmit button Πafter unlocking
the vehicle.
The windows begin to open after approx. 1 second.
To interrupt opening procedure, release transmit
button.
Warning!
Never operate the windows if there is the
possibility of anyone being harmed by the opening
or closing procedure.
To close:
Continue to press transmit button ‹ after locking
In case the procedure causes potential danger, the
procedure can be immediately halted by releasing
the remote control button. To reverse direction of
movement, press Œ for opening or ‹ for
closing.
the vehicle.
The windows begin to close after approx. 1 second.
To interrupt closing procedure, release transmit button.
Central locking system
29
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Central locking system
Panic button
30
Note:
For operation in the USA only: This device complies
with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
1
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Any unauthorized modification to this device could void
to the user’s authority to operate the equipment.
Mechanical keys
P80.35-2035-26
The mechanical keys work only in the driver’s door,
trunk, and storage compartment locks.
To activate press and hold button (1) for at least one
second. An audible alarm and blinking exterior lamps
will operate for approximately 3 minutes.
Notes:
To deactivate press button (1) again, or insert electronic
key in steering lock.
The mechanical key does not operate the central locking
system or antitheft alarm system.
The fuel filler flap cannot be locked or unlocked with
the mechanical key.
Download from Www.Somanuals.com. All Manuals Search And Download.
Doors
3
2
1
1
1 Opening – pull handle
Important!
2 Unlocking driver’s door
The mechanical key does not operate the central locking
system or antitheft alarm system.
3 Locking driver’s door
4 Individual door from inside:
• Push lock button down to lock.
• Pull inside door handle to unlock.
When you lock the driver’s door with the mechanical
key, the door lock button should move down.
The passenger door must be locked with the door lock
button – the driver’s door can only be locked when it is
closed.
Central locking system
31
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Central locking system
32
If the vehicle has previously been locked from the
outside, opening a door from the inside will trigger the
alarm. When opening a door while the central locking
system is in the:
To lock, push down lock button and turn mechanical key
in driver’s door lock to position 3. In addition lock the
trunk.
To unlock, pull inside door handle and turn mechanical
key in driver’s door lock to position 2.
• selective unlocking mode, only that individual door
is unlocked. The remaining door, the trunk and fuel
filler flap remain locked,
When unlocking the driver’s door with the mechanical
key, the exterior lamps will flash and the alarm will
sound.
• global unlocking mode, both doors, the trunk and
fuel filler flap are unlocked.
To cancel the alarm, insert the electronic key in the
steering lock or press button Œ or ‹ on the
electronic key.
Notes:
When opening a door, the door window lowers slightly.
After closing the door, the window closes again.
In case of a malfunction in the central locking system
the doors can be locked and unlocked individually.
Download from Www.Somanuals.com. All Manuals Search And Download.
Central locking switch
If the vehicle was previously locked with the central
locking switch, while in the global remote control mode,
the complete vehicle is unlocked when a door is opened
from the inside.
Notes:
If the vehicle was previously locked with the remote
control, the doors and trunk cannot be unlocked with
the central locking switch.
If the vehicle has previously been locked from the
outside, opening a door with the inside door handle will
trigger the alarm. To cancel the alarm, insert the
electronic key in the steering lock or press button Œ
or ‹ on the electronic key.
The fuel filler flap cannot be locked or unlocked with
the central locking switch.
1 Locking
2 Unlocking
Warning!
The central locking switch is located in the center
console.
When leaving the vehicle, always remove the
electronic key from the steering lock, and lock your
vehicle. Do not leave children unattended in the
vehicle, or with access to an unlocked vehicle.
Unsupervised use of vehicle equipment may cause
an accident and/or serious personal injury.
The doors and trunk can only be locked with the central
locking switch, if both doors are closed.
If the vehicle was previously locked with the central
locking switch, while in the selective remote control
mode, only the door opened from the inside is unlocked.
Central locking system
33
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Central locking system
Automatic central locking
34
If a door is opened from the inside at speeds of approx.
9 mph (15 km/h) or less with the automatic central
locking activated, the door will again be automatically
locked at speeds of approx. 9 mph (15 km/h) or more.
The central locking switch also operates the automatic
central locking.
With the automatic central locking system activated, the
doors and trunk are locked at vehicle speeds of approx.
9 mph (15 km/h) or more. The fuel filler flap remains
unlocked.
Important!
When towing the vehicle, or with the vehicle on a
dynamometer test stand, please, note the following:
To activate:
With the automatic central locking activated and the
electronic key in steering lock position 2, the vehicle
doors will lock if the left front wheel as well as the right
rear wheel spin at vehicle speeds of approx. 9 mph
(15 km/h) or more.
With electronic key in steering lock position 2 hold
upper portion of switch (1) for a minimum of 5 seconds.
To deactivate:
To prevent the vehicle door locks from locking,
deactivate the automatic central locking.
With electronic key in steering lock position 2 hold
lower portion of switch (2) for a minimum of 5 seconds.
Emergency unlocking in case of accident
Notes:
If doors are unlocked with the central locking switch
after activating the automatic central locking, and
neither door is opened, then the doors remain unlocked
even at vehicle speeds of approx. 9 mph (15 km/h) or
more.
The doors unlock automatically a short time after a
strong deceleration is detected, such as in a collision
(this is intended to aid rescue and exit).
Driving on rough roads may cause the vehicle to unlock.
If necessary, the vehicle can be locked again with the
central locking switch, see page 33.
Download from Www.Somanuals.com. All Manuals Search And Download.
Trunk
Notes:
The mechanical key does not operate the central locking
system or antitheft alarm system.
When unlocking the trunk with the mechanical key, the
exterior lamps will flash and the alarm will sound.
To cancel the alarm, insert the electronic key in the
steering lock or press button Œ or ‹ on the
electronic key.
In case of a malfunction in the central locking system
the trunk can be unlocked individually.
To unlock and open the trunk lid, turn mechanical key
to position 1, hold and push to open.
If the fuel filler flap cannot be opened, see page 296.
0 Neutral position – push to open (arrow)
Important!
1 Unlocking
Do not place mechanical key inside trunk, since trunk is
locked when the lid is closed if the vehicle has been
previously centrally locked.
To prevent damage to the trunk lid and the soft top
compartment cover, do not open the trunk lid while the
soft top is being raised or lowered.
Central locking system
35
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Trunk lamp
Car care
Index
Central locking system
36
1
P88.50-2009-26
P82.20-2029-26
Lower trunk lid using handle (1) and close it with hands
placed flat on trunk lid. Please remember to keep your
fingers out of the space between the lid and the vehicle.
If the trunk is to remain open for a long period of time,
the trunk lamp can be switched off by pulling out the
plunger in the switch (arrow). This prevents the vehicle
battery from being discharged.
When the trunk lid is closed, the switch will reset and
turn on the lamp next time the lid is opened.
Download from Www.Somanuals.com. All Manuals Search And Download.
Trunk lid release switch
Notes:
The trunk can also be opened by using the electronic
key. Press Š button.
The trunk lid cannot be opened by the switch or the
remote control when previously locked separately with
the mechanical key. To open, see page 35.
The trunk lid cannot be opened with the trunk lid
release switch when the vehicle was previously locked
with the central locking switch. To unlock vehicle with
the central locking switch, see page 33.
The switch is located on the center console.
A minimum height clearance of 5.9 ft. (1.8 m) is
required to open the trunk lid.
To open the trunk, the vehicle must be at standstill. Pull
up on switch until trunk lid is open.
The indicator lamp in the switch remains on with trunk
lid open.
Central locking system
37
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Important!
Car care
Index
Central locking system
Trunk lid emergency release
38
The emergency release button (1) does not open the
trunk lid if the vehicle battery is discharged or
disconnected.
Illumination of the emergency release button (1):
The button will blink for 30 minutes after opening the
trunk.
The button will blink for 60 minutes after closing the
trunk.
1
Notes:
The emergency release button (1) unlocks and opens
the trunk while the vehicle is standing or driving.
The emergency release button (1) is located in the trunk
lid.
When pressing the emergency release button while the
vehicle is locked with the remote control, the exterior
lamps will flash and the alarm will sound as the trunk
lid opens.
Briefly press emergency release button (1).
The trunk unlocks and the trunk lid opens.
To cancel the alarm, insert the electronic key in the
steering lock or press button Œ or ‹ on the
electronic key.
Download from Www.Somanuals.com. All Manuals Search And Download.
Antitheft alarm system
Operation:
Once the alarm system has been armed, the exterior
vehicle lamps will flash and an alarm will sound when
someone:
• opens a door,
• opens the trunk,
1
• opens the hood,
• attempts to raise the vehicle.
The alarm will last approximately 3 minutes in form of
flashing exterior lamps. At the same time an alarm will
sound for 30 seconds. The alarm will stay on even if the
activating element (a door, for example) is immediately
closed. The antitheft alarm system is switched off
automatically if the vehicle is unlocked with the
electronic key. If the alarm stays on for more than
20 seconds, an emergency call is initiated automatically.
See Tele Aid on page 178.
1 Indicator lamp in switch located in center console
The antitheft alarm is automatically armed or disarmed
with the remote control by locking or unlocking the
vehicle.
Note:
The antitheft alarm is armed within approx. 10 seconds
after locking the vehicle.
When you unlock the driver’s door with the mechanical
key, the exterior lamps will flash and the alarm will
sound. To interrupt the alarm, insert the electronic key
in the steering lock or press button Œ or ‹ on the
electronic key.
A blinking lamp (1) indicates that the alarm is armed.
Antitheft alarm system
39
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Tow-away alarm
40
Tow-away alarm
The alarm will last approximately 3 minutes in form of
flashing exterior lamps. At the same time an alarm will
sound for 30 seconds. The alarm will stay on even if the
vehicle is immediately lowered. The tow-away alarm
system is switched off automatically if the vehicle is
unlocked with the electronic key.
If the alarm stays on for more than 20 seconds, an
emergency call is initiated automatically. See Tele Aid
on page 178.
To prevent triggering the tow-away alarm feature, switch
off the tow-away alarm before towing the vehicle, or
when parking on a surface subject to movement, such
as a ferry or auto train.
To do so, turn electronic key in steering lock to
position 1 or 0, or remove electronic key from steering
lock. Press tow-away alarm switch (1). The indicator
lamp (2) illuminates briefly.
The switch is located in the center console.
1 Press to switch off
Exit vehicle, and lock vehicle with the remote control.
2 Indicator lamp
The tow-away alarm remains switched off until the
vehicle is locked again with the remote control, at which
time it is automatically reactivated.
Once the alarm system has been armed, the exterior
vehicle lamps will flash and an alarm will sound when
someone attempts to raise the vehicle.
Download from Www.Somanuals.com. All Manuals Search And Download.
Power seats, front
Warning!
Warning!
Do not adjust the driver’s seat while driving.
Adjusting the seat while driving could cause the
driver to lose control of the vehicle.
When leaving the vehicle, always remove the
electronic key from the steering lock, and lock your
vehicle.
Never ride in a moving vehicle with the backrest
reclined. Sitting in an excessively reclined position
can be dangerous. You could slide under the seat
belt in a collision. If you slide under it, the belt
would apply force at the abdomen or neck. That
could cause serious or even fatal injuries. The
backrest and seat belt provide the best restraint
when the wearer is in an upright position and the
belt is properly positioned on the body.
The power seats can also be operated with the
driver’s or passenger door open. Do not leave
children unattended in the vehicle or with access
to an unlocked vehicle. Unsupervised use of vehicle
equipment may cause an accident and/or serious
personal injury.
To operate the front power seat adjustment switches,
turn electronic key in steering lock to position 1 or 2
(with the driver’s or passenger’s door open, the power
seats can also be operated with the electronic key
removed or in steering lock position 0).
Never place hands under seat or near any moving
parts while a seat is being adjusted.
Seats
41
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Seats
42
safely. The position should be as far rearward as
possible, consistent with ability to properly operate
controls.
5
Note:
4
Do not move the front passenger seat completely
forward if objects are stored in the parcel net in the
front passenger side footwell. Items in the net may
be damaged.
2
2
1
3
3 Seat cushion tilt
Press the switch in the direction of the arrow until
your legs are lightly supported.
4 Backrest tilt
Press the switch in the direction of the arrow until
your arms are slightly angled when holding the
steering wheel.
The slide switches are located in each door.
We recommend to adjust the power seat in the following
order:
5 Head restraint
1 Seat, up/down
During seat adjustment, the head restraint is
automatically adjusted based on seat (fore/aft)
position to support the back of the head
approximately at ear level. Please check the position
of the head restraint to assure that it supports the
back of the head approximately at ear level. The
head restraint angle can also be adjusted manually.
Press the switch (up/down direction) until
comfortable seating position with still sufficient
headroom is reached.
2 Seat, fore/aft
Press the switch (fore/aft direction) until a
comfortable seating position is reached that still
allows you to reach the accelerator/brake pedal
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
Memory storing and recalling
Your vehicle is equipped with power head restraints, do
not try to raise or lower them manually.
Only minor personal adjustments, as described below,
should then be required.
For steering wheel adjustment, see page 73;
inside rear view mirror, see page 74;
exterior rear view mirrors, see page 75.
Caution!
Do not remove head restraints except when mounting
seat covers. For removal see page 46. Whenever
restraints have been removed be sure to reinstall them
before driving.
6 Memory button
7 Position buttons
Seats
43
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Recalling
Car care
Index
Seats
44
Storing
Three sets of seat/head restraint positions may be
programmed into memory.
To recall a seat/head restraint and exterior rear view
mirror position, push and hold position button “1”, “2”
or “3” until seat/head restraint and exterior rear view
mirror movement has stopped. The seat/head restraint
and exterior rear view mirror movement stops when the
position button is released.
Together with the driver’s seat position you can store
the exterior rear view mirror positions.
After the seat/head restraint and exterior rear view
mirrors are positioned, push memory button (6),
release, and within 3 seconds push position button “1”.
A second and third set of positions for the same seat/
head restraint and exterior rear view mirrors can be
programmed into memory by pushing first memory
button (6) and then “2”, respectively “3”.
Caution!
Do not operate the power seats using the memory
button if the backrest is in an excessively reclined
position. Doing so could cause damage to front or rear
seats.
Note:
First move the backrest to an upright position.
See page 75 for instructions on adjustment of mirrors.
Synchronizing power seats and head restraints
If the power supply was interrupted (battery
disconnected or empty), the power seats and head
restraints are no longer adjusted automatically.
To resynchronize the adjustment feature, turn
electronic key in steering lock to position 2, move the
seat completely forward and the head restraint fully
down, and hold respective buttons for approx.
2 seconds.
Download from Www.Somanuals.com. All Manuals Search And Download.
Important!
Warning!
Prior to operating the vehicle, the driver should adjust
the seat height for proper vision as well as fore/aft
placement and backrest angle to insure adequate
control, reach, operation, and comfort. The head
restraint should also be adjusted for proper height. See
also airbag section on page 61 for proper seat
positioning.
Children 12 years old and under must never ride in
the front seat, except in a Mercedes-Benz
authorized BabySmartTM compatible child seat,
which operates with the BabySmartTM system
installed in the vehicle to deactivate the passenger
side front airbag when it is properly installed.
Otherwise they will be struck by the airbag when it
inflates in a crash. If this happens, serious or fatal
injury can result.
In addition, also adjust the steering wheel to ensure
adequate control, reach, operation, and comfort.
According to accident statistics, children are safer
when properly restrained in the rear seating
positions than in the front seating positions.
Infants and small children must ride in back seats
and be seated in an appropriate infant or child
restraint system, which is properly secured with
the vehicle's seat belt or lower anchors, fully in
accordance with the child seat manufacturer’s
instructions.
Both the inside and outside rear view mirrors should be
adjusted for adequate rearward vision.
Fasten seat belts. Infants and small children should be
seated in a properly secured restraint system that
complies with U.S. Federal Motor Vehicle Safety
Standards 213 and 225 and Canadian Motor Vehicle
Safety Standards 213 and 210.2.
A child’s risk of serious or fatal injuries is
significantly increased if the child restraints are
not properly secured in the vehicle and the child is
not properly secured in the child restraint.
All seat, head restraint, steering wheel, and rear view
mirror adjustments as well as fastening of seat belts
should be done before the vehicle is put into motion.
Seats
45
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Seats
46
Front head restraints
Warning!
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint to support the back of the
head approximately at ear level.
Do not drive the vehicle without the seat head
restraints. Head restraints are intended to help
reduce injuries during an accident.
Removal:
Installation:
Tilt the backrest rearward for easier removal of the front
head restraints.
Push button (1) of the power adjustable head restraint
up for approximately 5 seconds.
Push button (1) up to bring the power adjustable head
restraint to its highest position.
Insert the head restraint and push it down to the stop.
Adjust head restraint to the desired position.
Pull out head restraint completely with both hands.
For positioning of head restraints see also power seats,
front on page 41, and head restraints, rear on page 48.
Download from Www.Somanuals.com. All Manuals Search And Download.
Roll bar and head restraints, rear
Warning!
The rear head restraints are integrated in the roll bar.
Raising or lowering of the roll bar could injure rear
seated occupants.
The roll bar will be automatically raised in an accident
or in a potentially dangerous driving situation. A ratchet
noise can be heard when the roll bar is automatically
raised.
Before operating the roll bar switch make sure that
the roll bar’s path is clear and no persons due to
inattention are injured by the moving roll bar.
For your own safety we recommend to drive with
the roll bar raised, if
The roll bar can be lowered again after an automatic
deployment by pressing the upper half of the roll bar
switch (for at least 8 seconds) until the roll bar drive
mechanism audibly engages. Then press the lower half
of the switch to lower the roll bar.
• the outside temperature is below +5°F (-15°C).
• the rear seats are occupied by passengers.
Before working on the vehicle, e.g. when changing
wheels, the roll bar should be raised with the
switch, and the electronic key should be removed
from the steering lock, to prevent possible injury.
If the roll bar was raised using the switch, it will be
automatically lowered when activating the soft top
switch.
In case of potential danger release the switch to
immediately interrupt the operating procedure.
Seats
47
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Seats
48
Switch for roll bar and head restraints, rear
With the engine running and the roll bar lowered, the
warning lamp in the roll bar switch will blink for
approx. 15 seconds. The blinking is reminding you to
raise the roll bar if the rear passenger seats are
occupied. See also page 229 for roll bar warning lamp.
1
2
Important!
The roll bar is intended to be a safety enhancement to
the other features designed into the vehicle. No system
in any vehicle can eliminate the possibility of serious
injury or fatality in an accident. Properly fastened seat
belts and child restraints must be used!
Notes:
P91.59-2001-26
If the warning lamp in the switch comes on, then a
malfunction has been detected. In this case, drive only
with the roll bar raised until the problem has been
corrected. Raise the roll bar by pressing the upper half
of the roll bar switch.
The switch is located in the center console.
Turn electronic key in steering lock to position 2.
Press switch:
Have the system checked at your authorized
Mercedes-Benz Center as soon as possible.
1 Raise roll bar
2 Lower roll bar
Items being transported in the rear passenger
compartment should be placed in such a manner as not
to affect the movement of the roll bar when being
raised.
The lowering or raising procedure is immediately
interrupted by releasing the roll bar switch.
Download from Www.Somanuals.com. All Manuals Search And Download.
Backrest
Notes:
The automatic seat slide is provided with a safety
feature. The automatic process is interrupted, if the
backrest of the sliding seat is pushed against an
occupant or object. The seat will slide forward, stop, and
make 3 attempts sliding backward.
To halt the automatic process, activate the power seat
switch. Investigate and correct the cause of interruption.
Now use memory button or power seat switch to bring
seat into desired position.
The backrest release lever (1) also serves as a rest for
the front seat belt, bringing it within easy reach.
Warning!
When leaving the vehicle, always remove the
electronic key from the steering lock, and lock your
vehicle.
1 Release lever
Folding forward:
Lift release lever (1) and fold backrest forward. The seat
will automatically slide forward and the head restraint
will move down.
The power seats can also be operated with the
driver’s or passenger door open. Do not leave
children unattended in the vehicle or with access
to an unlocked vehicle. Unsupervised use of vehicle
equipment may cause an accident and/or serious
personal injury.
Folding back:
Lift release lever (1) and fold backrest back. The seat
and head restraint return to their previous positions.
Never place hands under seat or near any moving
parts during a seat adjustment procedure.
To interrupt the procedure, activate the power seat
switch.
Seats
49
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Seats
50
Multicontour seat (optional)
We recommend to adjust the multicontour seat in the
following order:
1 Seat cushion depth
Slide the switch fore or aft until your legs are
supported comfortably.
4
2 Backrest bottom
3 Backrest center
3
2
4 Side bolster adjustment
Adjust the side bolster to provide good lateral
support.
1
The seat cushion movement and amount of backrest
cushion height and curvature can be continuously
varied with regulators (1, 2 and 3) after turning the
electronic key in steering lock to position 2.
P91.25-2063-26
Some models may be equipped with multicontour seats.
These seats have movable seat cushions, and inflatable
air cushions built into the backrest to provide additional
lumbar and side support.
The side bolsters of the backrest can be adjusted with
rocker switch (4):
• press to the right – increase side support,
• press to the left – decrease side support.
If the engine is turned off, the last cushion setting is
retained in memory, and automatically adjusts the
cushion to this setting when the engine is restarted.
Download from Www.Somanuals.com. All Manuals Search And Download.
Heated seats, front (optional)
1 Normal seat heating mode. One indicator lamp in
the switch lights up.
2 Rapid seat heating mode. Both indicator lamps in
the switch light up.
1
After approximately 5 minutes in the rapid seat
heating mode, the seat heater automatically
switches to normal operation and only one indicator
lamp will stay on.
Turning off seat heater:
2
If one indicator lamp is on, press upper half of switch.
If both indicator lamps are on, press lower half of
switch.
P54.25-2036-26
If left on, the seat heater automatically turns off after
approximately 30 minutes of operation.
The front seat heater switches are located in the center
console.
The front seat heaters can be switched on with the
electronic key in steering lock positions 1 or 2.
Press switch to turn on seat heater:
Seats
51
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Restraint systems
52
Notes:
Seat belts and integrated restraint system
When in operation, the seat heater consumes a large
amount of electrical power. It is not advisable to use the
seat heater longer than necessary.
Your vehicle is equipped with seat belts for all seats,
emergency tensioning devices for the front seat belts,
dual front airbags, door mounted side impact airbags
and knee bolsters for driver and front passenger. Their
protective functions are designed to complement one
another.
The seat heaters may automatically switch off if too
many power consumers are switched on at the same
time, or if the battery charge is low. When this occurs,
the indicator lamp in the switch will blink (both
indicator lamps blink during rapid seat heating mode).
The seat heaters will switch on again automatically as
soon as sufficient voltage is available.
If the blinking of the indicator lamps is distracting to
you, the seat heaters can be switched off.
Download from Www.Somanuals.com. All Manuals Search And Download.
Seat belts
Warning!
Children 12 years old and under must never ride in
the front seat, except in a Mercedes-Benz
authorized BabySmartTM compatible child seat,
which operates with the BabySmartTM system
installed in the vehicle to deactivate the passenger
side front airbag when it is properly installed.
Otherwise they will be struck by the airbag when it
inflates in a crash. If this happens, serious or fatal
injury will result.
Important!
Laws in most states and all Canadian provinces require
seat belt use.
All U.S. states, the District of Columbia, the U.S.
territories and all Canadian provinces require the use of
child restraints that comply with U.S. Fedral Motor
Vehicle Safety Standards 213 and 225 and Canadian
Motor Vehicle Safety Standards 213 and 210.2.
According to accident statistics, children are safer
when properly restrained in the rear seating
positions than in the front seating positions.
Infants and small children must ride in back seats
and be seated in an appropriate infant or child
restraint system, which is properly secured with
the vehicle's seat belt or lower anchors, fully in
accordance with the child seat manufacturer’s
instructions.
For your safety and that of your passengers we strongly
recommend their use.
A child’s risk of serious or fatal injuries is
significantly increased if the child restraints are
not properly secured in the vehicle and the child is
not properly secured in the child restraint.
Restraint systems
53
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Warning!
Car care
Index
Restraint systems
54
Warning!
Never ride in a moving vehicle with the backrest
reclined. Sitting in an excessively reclined position
can be dangerous. You could slide under the seat
belt in a collision. If you slide under it, the belt
would apply force at the abdomen or neck. That
could cause serious or even fatal injuries. The
backrest and seat belt provide the best restraint
when the wearer is in an upright position and the
belt is properly positioned on the body.
Failure to wear and properly fasten and position
your seat belt greatly increases your risk of
injuries and their likely severity in an accident.
You and your passengers should always wear seat
belts.
If you are ever in an accident, your injuries can be
considerably more severe without your seat belt
properly buckled. Without your seat belt buckled,
you are much more likely to hit the interior of the
vehicle or be ejected from it. You can be seriously
injured or killed.
Note:
For cleaning and care of the seat belts, see page 304.
In the same crash, the possibility for injury or
death is lessened if you are wearing your seat belt.
Seat belt nonusage warning system
Warning!
With the electronic key in steering lock position 2, a
warning sounds for a short time if the driver’s seat belt
is not fastened. See also seat belt warning lamp on
page 228.
Never let more people ride in the vehicle than there
are seat belts available. Be sure everyone riding in
the vehicle is correctly restrained with a separate
seat belt.
Download from Www.Somanuals.com. All Manuals Search And Download.
Fastening of seat belts
Push latch plate (1) into buckle (2) until it clicks. Do not
twist the belt. A twisted seat belt may cause injury.
To help avoid severe or fatal injuries, the lap belt must
be positioned as low as possible on your hips and not
across the abdomen.
Warning!
1
Always fasten your seat belt before driving off.
Always make sure your passengers are properly
restrained – even those sitting in the rear.
3
2
1 Latch plate
2 Buckle
3 Release button
Restraint systems
55
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Restraint systems
56
Unfastening of seat belts
1
3
2
P91.40-2102-26
Tighten the lap portion to a snug fit by pulling shoulder
portion up.
Push the release button (3) in the belt buckle (2). Allow
the device to completely rewind the seat belt by guiding
the latch plate (1).
The shoulder portion of the seat belt must be pulled
snug and checked for snugness immediately after
engaging it.
Operation
The inertia reel stops the belt from unwinding during
sudden vehicle stops or when quickly pulling on the
belt. The locking function of the reel may be checked by
quickly pulling out the belt.
Adjust seat belt so that shoulder portion is located as
close as possible to the middle of your shoulder (it
should not touch the neck).
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution!
• Never wear belts over rigid or breakable
objects in or on your clothing, such as
eyeglasses, pens, keys etc., as these might
cause injuries.
For safety reasons, avoid adjusting the seat or backrest
into positions which could affect the correct seat belt
position.
• Never wear the shoulder belt under your arm,
against your neck or off your shoulder. In a
crash, your body would move too far forward.
That would increase the chance of head and
neck injuries. The belt would also apply too
much force to the ribs or abdomen, which
could severely injure internal organs such as
your liver or spleen.
Warning!
USE SEAT BELTS PROPERLY.
• Seat belts can only work when used properly.
Never wear seat belts in any other way than as
described in this section, as that could result
in serious injuries in case of an accident.
• Each occupant should wear their seat belt at all
times, because seat belts help reduce the
likelihood of and potential severity of injuries
in accidents, including rollovers. The
• Position the lap belt as low as possible on your
hips and not across the abdomen. If the belt is
positioned across your abdomen, it could cause
serious injuries in a crash.
integrated restraint system includes SRS
(driver airbag, front passenger airbag, door
mounted side impact airbags), ETD (seat belt
emergency tensioning devices), and front seat
knee bolsters. The system is designed to
enhance the protection offered to properly
belted occupants in certain frontal (front
airbags) and side (side impact airbags) impacts
which exceed preset deployment thresholds.
• Each seat belt should never be used for more
than one person at a time. Do not fasten a seat
belt around a person and another person or
other objects.
• Belts should not be worn twisted. In a crash,
you wouldn’t have the full width of the belt to
manage impact forces. The twisted belt against
your body could cause injuries.
Restraint systems
57
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Restraint systems
58
• Pregnant women should also use a lap-
shoulder belt. The lap belt portion should be
positioned as low as possible on the hips to
avoid any possible pressure on the abdomen.
According to accident statistics, children are safer
when properly restrained in the rear seating
positions than in the front seating positions.
Infants and small children must ride in back seats
and be seated in an appropriate infant or child
restraint system, which is properly secured with
the vehicle's seat belt or lower anchors, fully in
accordance with the child seat manufacturer’s
instructions.
• Never place your feet on the instrument panel
or on the seat. Always keep both feet on the
floor in front of the seat.
A child’s risk of serious or fatal injuries is
significantly increased if the child restraints are
not properly secured in the vehicle and the child is
not properly secured in the child restraint.
Warning!
USE CHILD RESTRAINTS PROPERLY.
Children 12 years old and under must never ride in
the front seat, except in a Mercedes-Benz
authorized BabySmartTM compatible child seat,
which operates with the BabySmartTM system
installed in the vehicle to deactivate the passenger
front airbag when it is properly installed.
Otherwise they will be struck by the airbag when it
inflates in a crash. If this happens, serious or fatal
injury will result.
Children too big for child restraint systems must
ride in back seats using regular seat belts. Position
shoulder belt across chest and shoulder, not face or
neck. A booster seat may be necessary to achieve
proper belt positioning.
Download from Www.Somanuals.com. All Manuals Search And Download.
BabySmartTM airbag deactivation system
Follow the manufacturer’s instructions for
installation of special child seats.
When using a BabySmartTM compatible child seat
on the front passenger seat, the front passenger
airbag will not deploy only if the 7 indicator
lamp remains illuminated.
Special BabySmartTM compatible child seats, designed
for use with the Mercedes-Benz system and available at
any authorized Mercedes-Benz Center are required for
use with the BabySmartTM airbag deactivation system.
With the special child seat properly installed, the
passenger front airbag will not deploy. The 7
indicator lamp located on the center console will be
illuminated, except with electronic key removed or in
steering lock position 0. The system does not deactivate
the door mounted side impact airbag.
Please be sure to check the indicator every time
you use the special system child seat.
Should the light go out while the restraint is
installed, please check installation. If the light
remains out, do not use the BabySmartTM restraint
to transport children on the front passenger seat
until the system has been repaired.
BabySmartTM is a trademark of Siemens Automotive Corp.
Warning!
The BabySmartTM airbag deactivation system will
ONLY work with a special child seat designed to
operate with it. It will not work with child seats
which are not BabySmartTM compatible.
Self-test BabySmartTM
without special child seat installed
After turning electronic key in steering lock to
position 1 or 2, the 7 indicator lamp located on the
center console comes on for approx. 6 seconds and then
extinguishes.
Never place anything between seat cushion and
child seat (e.g. pillow), since it reduces the
effectiveness of the deactivation system. The
bottom of the child seat must make full contact
with the passenger seat cushion. An incorrectly
mounted child seat could cause injuries to the
child in case of an accident instead of protecting
the child.
If the indicator lamp should not come on or is
continuously lit, the system is not functioning. You must
see an authorized Mercedes-Benz Center before seating
any child on the front passenger seat.
Restraint systems
59
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Restraint systems
60
Supplemental restraint system (SRS)
Emergency tensioning device (ETD)
Airbags are intended as a supplement to seat belts.
Airbags alone cannot protect as well as airbags plus
seat belts in impacts for which the airbags were
designed to operate, and do not afford any protection
whatsoever in crashes for which the airbags are not
designed to deploy.
The seat belts for the front seats are equipped with
Emergency tensioning devices. These tensioning
devices are located in each belt’s inertia reel and
become operationally ready with the electronic key in
steering lock position 1 or 2.
The Emergency tensioning devices are designed to
activate only when the seat belts are fastened during
frontal impacts exceeding the first threshold of the SRS
and in rear impacts exceeding a preset severity level.
They remove slack from the belts in such a way that the
seat belts fit more snugly against the body restricting its
forward Emergency tensioning device movement as
much as possible.
The SRS uses two crash severity levels (thresholds) to
activate either the Emergency tensioning device or front
airbag or both. Activation depends on the direction and
severity of the impact exceeding the preset thresholds
and whether the seat belt is fastened.
Seat belt fastened
• first threshold exceeded: ETD activates
• second threshold exceeded: airbag also activates
In cases of other frontal impacts, angled impacts,
roll-overs, certain side impacts, or other accidents
without sufficient frontal or rear impact forces, the
Emergency tensioning device will not be activated. The
driver and passengers will then be protected by the
fastened seat belts and inertia reel in the usual manner.
Seat belt not fastened
• first threshold exceeded:
airbag activates, but not ETD
For seat belt and Emergency tensioning device safety
guidelines see page 67.
Driver and front passenger systems operate
independently of each other.
Download from Www.Somanuals.com. All Manuals Search And Download.
Airbags
2
SRS
SRS
AIRBAG
AIRBAG
1
1 Driver airbag
2 Front passenger airbag
The driver airbag is located in the steering wheel hub.
The passenger front airbag is located in the dashboard
ahead of the front passenger.
Restraint systems
61
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Restraint systems
62
mounted side impact airbags can provide increased
protection to belted front passengers on the impacted
side of the vehicle in side impacts exceeding its preset
threshold.
Important!
3
The operational readiness of the airbag system is
verified by the indicator lamp SRS in the instrument
cluster when turning the electronic key in steering lock
to position 1 or 2. If no fault is detected, the lamp will go
out after approximately 4 seconds; after the lamp goes
out, the system continues to monitor the components
and circuitry of the airbag system and will indicate a
malfunction by coming on again. If the lamp does not
come on at all or if it fails to extinguish after
P91.60-2122-26
3 Side impact airbag
approximately 4 seconds or if it comes on thereafter,
a malfunction in the system has been detected.
The side impact airbags are located in the doors.
The most effective occupant restraint system yet
developed for use in production vehicles is the seat belt.
In some cases, however, the protective effect of a seat
belt can be further enhanced by an airbag.
The following system components are monitored or
undergo a self-check: crash-sensor(s), airbag ignition
circuits, front seat belt buckles, Emergency tensioning
devices, seat sensor.
In conjunction with wearing the seat belts, the driver
and front passenger airbags can provide increased
protection for the driver and front passenger in certain
frontal impacts exceeding preset thresholds. Door
Download from Www.Somanuals.com. All Manuals Search And Download.
Initially, when the electronic key is turned from steering
lock position 0 to positions 1 or 2, malfunctions in the
crash-sensor are detected and indicated (the SRS
indicator lamp stays on longer than 4 seconds or does
not come on).
Front airbags
The driver and front passenger front airbags are
designed to activate only in certain frontal impacts
exceeding a preset threshold.
The front passenger airbag deploys only if the front
passenger seat is occupied and the indicator lamp on
the center console is not illuminated.
Have the system checked at your authorized
Mercedes-Benz Center immediately.
In the operational mode, after the indicator lamp has
gone out following the initial check, interruptions or
short circuits in the airbag ignition circuit and in the
driver and front passenger seat belt buckle harnesses,
and low voltage in the entire system are detected and
indicated.
Note:
Objects heavier than 20 lbs (9 kg) on the front
passenger seat can appear to the SRS to indicate the
presence of an occupant in that seat which causes the
passenger front airbag to deploy in a crash exceeding
the appropriate threshold.
Warning!
In the event a malfunction of the SRS is indicated
as outlined above, the SRS may not be operational.
For your safety, we strongly recommend that you
visit an authorized Mercedes-Benz Center
immediately to have the system checked; otherwise
the SRS may not be activated when needed in an
accident, which could result in serious or fatal
injury, or it might deploy unexpectedly and
unnecessarily which could also result in injury.
Restraint systems
63
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Important!
Car care
Index
Restraint systems
64
Side impact airbags
The side impact airbags are designed to activate only in
certain side impacts exceeding a preset threshold. Only
the side impact airbag on the impacted side of the
vehicle deploys.
Airbags are designed to activate only in certain
frontal (front airbags) impacts, or side (side impact
airbags) impacts which exceed preset thresholds.
Only during these types of impacts, if of sufficient
severity to meet the deployment thresholds, will
they provide their supplemental protection.
The side impact airbag for the front passenger deploys
only if the front passenger seat is occupied.
Side impact airbags operate best in conjunction with a
properly positioned and fastened seat belt.
The driver and passenger should always wear their
seat belts, otherwise it is not possible for the airbags
to provide their intended supplemental protection.
Note:
In cases of other frontal impacts, angled impacts,
roll-overs, other side impacts, rear collisions, or
other accidents in which the airbags are not
designed to deploy, the airbags will not be activated.
The driver and passenger will then be protected by
the fastened seat belts.
Objects heavier than 20 lbs (9 kg) on the front
passenger seat can cause the side impact airbag to
deploy in a crash.
We caution you not to rely on the presence of the
airbags in order to avoid wearing your seat belt.
Download from Www.Somanuals.com. All Manuals Search And Download.
Your vehicle was originally equipped with airbags
that are designed to activate in certain impacts
exceeding a preset threshold to reduce the potential
and severity of injury. It is important to your safety
and that of your passengers that you replace
deployed airbags and repair any malfunctioning
airbags to ensure the vehicle will continue to
provide supplemental crash protection for
occupants.
Warning!
Airbags are designed to reduce the potential of
injury in certain frontal (front airbags) impacts,
and side (side impact airbags) impacts which may
cause significant injuries, however, no system
available today can totally eliminate injuries and
fatalities.
The activation of the SRS temporarily releases a
small amount of dust from the airbags. This dust,
however, is neither injurious to your health, nor
does it indicate a fire in the vehicle. The dust might
cause some temporary breathing difficulty for
people with asthma or other breathing trouble. To
avoid this, you may wish to get out of the vehicle as
soon as it is safe to do so. If you have any breathing
difficulty but cannot get out of the vehicle after the
airbag inflates, then get fresh air by opening a
window or door.
Warning!
To reduce the risk of injury when the front airbags
inflate, it is very important for the driver and front
passenger to always be in a properly seated
position and to wear their seat belts.
For maximum protection in the event of a collision
always be in normal seated position with your back
against the backrest. Fasten your seat belt and
ensure that it is properly positioned on your body.
Since the airbag inflates with considerable speed
and force, a proper seating and hands on steering
wheel position will help to keep you at a safe
distance from the airbag. Occupants who are
unbelted, out of position or too close to the airbag
can be seriously injured by an airbag as it inflates
with great force in the blink of an eye:
Restraint systems
65
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Restraint systems
66
• Sit properly belted in an upright position with
your back against the backrest.
• Occupants, especially children, should never
lean their heads in the area of the door where
the side airbag inflates. This could result in
serious injuries or death should the airbag be
triggered. Always sit upright, properly use the
seat belts, and appropriate size infant or child
restraint system.
• Adjust the driver seat as far as possible
rearward, still permitting proper operation of
vehicle controls. The distance from the center
of the driver’s breastbone to the center of the
airbag cover on the steering wheel must be at
least ten inches (25 cm) or more. You should be
able to accomplish this by a combination of
adjustments to the seat and steering wheel. If
you have any problems, please see your
authorized Mercedes-Benz Center.
• Children 12 years old and under must never
ride in the front seat, except in a
Mercedes-Benz authorized BabySmartTM
compatible child seat, which operates with the
BabySmartTM system installed in the vehicle to
deactivate the passenger front airbag when it
is properly installed. Otherwise they will be
struck by the airbag when it inflates in a crash.
If this happens, serious or fatal injury can
result.
• Do not lean with your head or chest close to the
steering wheel or dashboard.
• Keep hands on the outside of steering wheel
rim. Placing hands and arms inside the rim
can increase the risk and potential severity of
hand/arm injury when the driver front airbag
inflates.
Failure to follow these instructions can result in
severe or fatal injuries to you or other occupants.
• Adjust the front passenger seat as far as
possible rearward from the dashboard when
the seat is occupied.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety guidelines for the seat belt,
Emergency tensioning device and airbag
Warning!
Accident research shows that the safest place for
children in an automobile is in the rear seat.
Should you choose to place a child 12 years old or
under in the front passenger seat of your vehicle,
you must properly use a BabySmartTM child
restraint which will turn off the passenger side
front airbag. BabySmartTM will not, however, turn
off the passenger’s side impact airbag.
Warning!
• Damaged seat belts or belts that were highly
stressed in an accident must be replaced and
their anchoring points must also be checked.
Use only belts installed or supplied by an
authorized Mercedes-Benz Center.
It should be noted however that there is a
possibility for a side airbag related injury if
occupants, especially children, are not properly
seated or restrained when next to a side airbag
which needs to deploy rapidly in a side impact in
order to do its job.
• Do not pass belts over sharp edges.
• Do not make any modification that could
change the effectiveness of the belts.
• Airbags and ETDs are designed to function on a
one-time-only basis. An airbag or Emergency
tensioning device (ETD) that was activated
must be replaced.
To help avoid the possibility of injury, please follow
these guidelines: (1) occupants, especially
children, should never place their bodies or lean
their heads in the area of the door where the side
airbag inflates. This could result in serious
injuries or death should the side airbag be
activated; (2) always sit upright, properly use the
seat belts and use an appropriately sized infant or
child restraint system for all children 12 years old
or under; and (3) always wear seat belts properly.
Restraint systems
67
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Restraint systems
68
• No modifications of any kind may be made to
any components or wiring of the SRS. This
includes changing or removing any component
or part of the SRS, the installation of additional
trim material, badges etc. over the steering
wheel hub, front passenger airbag cover, or
front door trim panels, and installation of
additional electrical/electronic equipment on
or near SRS components and wiring. Keep area
between airbags and occupants free of objects
(e.g. packages, purses, umbrellas, etc.).
• For your protection and the protection of
others, when scrapping the airbag unit or
Emergency tensioning device, our safety
instructions must be followed. These
instructions are available at your authorized
Mercedes-Benz Center.
• Given the considerable deployment speed and
the textile structure of the airbags, there is the
possibility of abrasions or other injuries
resulting from airbag deployment.
• An airbag system component within the
steering wheel gets hot after the airbag has
inflated. Do not touch.
When you sell the vehicle we strongly urge you to give
notice to the subsequent owner that it is equipped with
an SRS by alerting him to the applicable section in the
Operator’s Manual.
• Improper work on the system, including
incorrect installation and removal, can lead to
possible injury through an unintended
activation of the SRS .
• In addition, through improper work there is
the risk of rendering the SRS inoperative or
causing unintended airbag deployment. Work
on the SRS must therefore only be performed
by an authorized Mercedes-Benz Center.
Download from Www.Somanuals.com. All Manuals Search And Download.
Infant and child restraint systems
Important!
We recommend all infants and children be properly re-
strained at all times while the vehicle is in motion. All
lap-shoulder belts except the driver’s seat belt have
special seat belt devices for secure fastening of child
restraints.
The use of infant or child restraints is required by law in
all 50 states, the District of Columbia, the U.S. territories
and all Canadian provinces.
Infants and small children should be seated in an
appropriate infant or child restraint system properly
secured by a lap-shoulder belt or, if so equipped, a child
restraint lower anchorage system that complies with
U.S. Federal Motor Vehicle Safety Standards 213 and
225 and Canadian Motor Vehicle Safety Standards 213
and 210.2.
To activate, pull shoulder belt out completely and let it
retract. During the seat belt retraction a ratcheting
sound can be heard to indicate that the special seat belt
device is activated. The belt is now locked.
To deactivate, release seat belt buckle and let seat belt
retract completely. The seat belt can again be used in
the usual manner.
When using any infant or child restraint system, be sure
to carefully read and follow all manufacturer’s
instructions for installation and use.
Warning!
Please read and observe warning labels affixed to inside
of vehicle and to infant or child restraints.
Never release the seat belt buckle while vehicle is
in motion, since the special seat belt device will be
deactivated.
Restraint systems
69
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Restraint systems
70
Warning!
Children too big for child restraint systems must
ride in back seats using regular seat belts. Position
shoulder belt across chest and shoulder, not face or
neck. A booster seat may be necessary to achieve
proper belt positioning for children from 41 lbs.
until they reach a height where a lap/shoulder belt
fits properly without a booster.
Children 12 years old and under must never ride in
the front seat, except in a Mercedes-Benz
authorized BabySmartTM compatible child seat,
which operates with the BabySmartTM system
installed in the vehicle to deactivate the passenger
front airbag when it is properly installed.
Otherwise they will be struck by the airbag when it
inflates in a crash. If this happens, serious or fatal
injury can result.
When the child restraint is not in use, remove it
from the vehicle or secure it with the seat belt to
prevent the child restraint from becoming a
projectile in the event of an accident.
According to accident statistics, children are safer
when properly restrained in the rear seating
positions than in the front seating positions.
Infants and small children must ride in back seats
and be seated in an appropriate infant or child
restraint system, which is properly secured with
the vehicle’s seat belt or lower anchors, fully in
accordance with the child seat manufacturer’s
instructions.
Do not leave children unattended in the vehicle;
even if the children are secured in a child restraint
system. Unsupervised children in a child restraint
system may use vehicle equipment and may cause
an accident and/or serious personal injury.
Infants and small children should never share a
seat belt with another occupant. During an
accident, they could be crushed between the
occupant and seat belt.
Download from Www.Somanuals.com. All Manuals Search And Download.
Child seat anchors - “LATCH” type
This vehicle is provided with two “LATCH” (Lower
Anchors and Tethers for CHildren) type anchors (at
each of the rear seats) for the installation of a “LATCH”
child seat having the matching mounting fittings.
The anchors are located behind an upholstery blend.
2 Anchors
To install a “LATCH” type child seat, fold down the
upholstery blend. Install child seat according to the
manufacturer’s instructions.
Non-“LATCH” type child seats may also be used and are
capable of being installed using the vehicle’s seat belt
system. Install child seat according to the
manufacturer’s instructions.
1 Indicates the position of the anchors
Restraint systems
71
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Restraint systems
72
Warning!
Children too big for child restraint systems must
ride in back seats using regular seat belts. Position
shoulder belt across chest and shoulder, not face or
neck. A booster seat may be necessary to achieve
proper belt positioning for children from 41 lbs.
until they reach a height where a lap/shoulder belt
fits properly without a booster.
Install child seat according to manufacturer’s
instructions.
The child seat must be firmly attached in the right
and left side anchors (2).
An incorrectly mounted child seat may come loose
during an accident which could result in serious
injury or death to your child.
Damaged or impact damaged child seats or child
seat mounting fittings must be replaced.
Do not leave children unattended in the vehicle,
even if the children are secured in a child restraint
system.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting telescoping steering column
Unlocking:
Pull handle (1) out to its stop. The indicator lamp,
located in the instrument cluster, comes on.
Adjusting:
To lengthen or shorten the steering column, pull out or
push in steering wheel.
Locking:
Push handle (1) in until it engages. The indicator lamp,
located in the instrument cluster, goes out.
1
Important!
With the electronic key in steering lock position 2, the
indicator lamp in the instrument cluster comes on.
It should go out when the engine is running.
P46.10-2020-26
Warning!
If the indicator lamp does not go out after starting the
engine, the adjustable steering column is not locked
properly.
Do not adjust the steering wheel while driving.
The telescoping adjustment must be locked while
driving. Adjusting the steering wheel while
driving, or driving without the telescoping
adjustment locked could cause the driver to lose
control of the vehicle.
Do not drive the vehicle until you have properly locked
the steering column.
Adjusting telescoping steering column
73
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Rear view mirrors
Inside rear view mirror
Manually adjust the inside mirror.
74
Note:
The automatic antiglare function does not react, if
incoming light is not aimed directly at sensors in the
inside rear view mirror.
The automatic antiglare function will not react for
example, if the wind screen is installed.
Use your inside mirror to determine the size and
distance of objects seen in the passenger side convex
mirror.
Antiglare night position
Warning!
With the electronic key in steering lock position 2, the
mirror reflection brightness responds to changes in
light sensitivity.
In the case of an accident liquid electrolyte may
escape the mirror housing when the mirror glass
breaks.
With gear selector lever in position “R”, or with the
interior lamp switched on, the mirror brightness does
not respond to changes in light sensitivity.
Electrolyte has an irritating effect. Do not allow the
liquid to come into contact with eyes, skin,
clothing, or respiratory system. In cases it does,
immediately flush affected area with water, and
seek medical help if necessary.
Download from Www.Somanuals.com. All Manuals Search And Download.
Exterior rear view mirrors
With the electronic key in steering lock position 2, the
driver’s side mirror reflection brightness responds to
changes in light sensitivity.
With gear selector lever in position “R”, or with the
interior lamp switched on, the driver’s side mirror
brightness does not respond to changes in light
sensitivity.
Warning!
Exercise care when using the passenger-side
mirror. The passenger-side exterior mirror is
convex (outwardly curved surface for a wider field
of view). Objects in mirror are closer than they
appear. Check your inside rear view mirror or
glance over your shoulder before changing lanes.
The switch is located on the center console.
Turn electronic key in steering lock to position 2.
First select the mirror to be adjusted – press button:
% Left mirror
Notes:
The exterior mirrors have electrically heated glass. The
heater switches on automatically, depending on outside
temperature.
& Right mirror
If an exterior mirror housing is forcibly pivoted from its
normal position, it must be repositioned by applying
firm pressure until it snaps into place. The automatic
antiglare function will not react for example, if the wind
screen is installed.
To adjust, toggle the switch forward, backward or to
either side.
Rear view mirrors
75
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Important!
Car care
Index
Rear view mirrors
76
Warning!
Electrolyte drops coming into contact with the vehicle
paint finish can only be completely removed while in
their liquid state, by applying plenty of water.
In the case of an accident liquid electrolyte may
escape the mirror housing when the mirror glass
breaks.
Electrolyte has an irritating effect. Do not allow the
liquid to come into contact with eyes, skin,
clothing, or respiratory system. In cases it does,
immediately flush affected area with water, and
seek medical help if necessary.
Storing mirror positions in memory
The exterior rear view mirror positions are stored in
memory with the seat/head restraint position and can
be recalled when necessary, see page 43.
Download from Www.Somanuals.com. All Manuals Search And Download.
Parking position
One passenger-side mirror position can be stored in
memory. To do so:
The passenger-side exterior mirror can be adjusted and
programmed to assist the driver during parking
maneuvers (e.g. to observe the curb or other objects
close to the vehicle).
1. Turn electronic key to steering lock position 2.
The vehicle must be stationary.
With electronic key in steering lock position 2, and the
exterior rear view mirror switch in the passenger side
position, the passenger-side mirror will be turned
downward when placing the gear selector lever in “R”
Reverse.
2. Select passenger-side mirror & and adjust the
mirror to view the curb.
3. Press green memory button located in switch cluster
for driver seat, see page 43.
4. Within 3 seconds pull the mirror toggle switch
rearward. The mirror should not move.
The passenger-side mirror position can now be adjusted
as desired.
Repeat the memory procedure if the mirror moves.
At speeds above approx. 6 mph (10 km/h), upon shifting
gear selector lever from “R” Reverse, or upon pressing
the driver’s side mirror button, the passenger-side
mirror will return to its previous position.
The passenger-side mirror will return to its previous
position after approx. 20 seconds.
Readjust the mirror as desired.
Rear view mirrors
77
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Instrument cluster
Instrument cluster
78
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Push buttons V and W for intensity of instrument
8 Speedometer
lamps, see page 81
9 Trip odometer, see page 83
10 Main odometer, see page 88
2 Push button J for resetting trip odometer, see
page 83, or to acknowledge a malfunction or
warning message, see page 100.
11 Multifunction indicator, see page 84
or FSS indicator, see page 105
3 Coolant temperature gauge, see page 82
or engine oil level indicator, see page 108
4 Fuel gauge with reserve and fuel cap placement
12 Right turn signal indicator lamp, see combination
warning lamp, see page 226
switch on page 113
5 Outside temperature indicator, see page 82
13 Tachometer, see page 83
6 Left turn signal indicator lamp, see combination
14 Gear range indicator display, see selector lever
switch on page 113
positions on page 194
7 ESP warning lamp, see page 227
15 Clock, see page 102
Instrument cluster
79
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Instrument cluster
80
Indicator lamps in the instrument cluster
Telescoping steering column not locked,
see page 228
High beam
SRS malfunction, see page 226
SRS
ABS malfunction, see page 227
ABS
If the “CHECK ENGINE” malfunction
indicator lamp comes on when the engine is
running, it indicates a malfunction of the
fuel management system, emission control
system, systems which impact emissions, or
the fuel cap is not closed tight. In all cases,
we recommend that you have the
CHECK
ENGINE
Brake fluid low (except Canada),
see page 225
Parking brake engaged, see page 225
BRAKE
Brake fluid low (Canada only),
see page 225
Parking brake engaged, see page 225
malfunction checked as soon as possible,
see page 224.
BAS malfunction, see page 227
ESP malfunction, see page 227 and 241
BAS
ESP
Function indicator lamp on the center console
ESP. Adjust driving to road condition,
see page 216
Front passenger airbag automatically
switched off, see page 59.
Fasten seat belts, see page 228
Download from Www.Somanuals.com. All Manuals Search And Download.
Activating instrument cluster display
The instrument cluster is activated by:
• Opening the door.
Instrument lamps
• Pressing button J, V or W on the instrument
cluster.
• Turning the electronic key in steering lock to
position 1 or 2.
• Switching on the exterior lamps.
Display illumination
The display for temperature, odometer, multifunction
indicator, FSS indicator and clock is illuminated briefly
when opening the driver’s door.
Activate the instrument cluster.
The display illumination brightness responds
automatically according to changes in the surrounding
light sensitivity.
Press V or W button to vary intensity of instrument
lamps.
To briefly illuminate the display (with electronic key
removed or in steering lock position 0), press button J.
Instrument cluster
81
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Instrument cluster
Coolant temperature gauge (3)
82
Outside temperature indicator (5)
During severe operating conditions and stop-and-go city
traffic, the coolant temperature may rise close to the red
marking.
The temperature sensor is located in the front bumper
area. Due to its location, the sensor can be affected by
road or engine heat during idling or slow driving. This
means that the accuracy of the displayed temperature
can only be verified by comparison to a thermometer
placed next to the sensor, not by comparison to external
displays (e.g. bank signs etc.).
The engine should not be operated with the coolant
temperature in the red zone. Doing so may cause
serious engine damage which is not covered by the
Mercedes-Benz Limited Warranty.
Adaptation to ambient temperature takes place in steps
and depends on the prevailing driving conditions (stop-
and-go or moderate, constant driving) and amount of
temperature change.
Warning!
• Driving when your engine is badly overheated
can cause some fluids which may have leaked
into the engine compartment to catch fire. You
could be seriously burned.
Warning!
The outside temperature indicator is not designed
to serve as an Ice-Warning Device and is therefore
unsuitable for that purpose. Indicated
temperatures just above the freezing point do not
guarantee that the road surface is free of ice.
• Steam from an overheated engine can cause
serious burns and can occur just by opening
the engine hood. Stay away from the engine if
you see or hear steam coming from it.
Turn off the engine, get out of the vehicle and do
not stand near the vehicle until it cools down.
Download from Www.Somanuals.com. All Manuals Search And Download.
Trip odometer (9)
Tachometer (13)
To reset to “0” miles/km:
The red marking on tachometer denotes excessive
engine speed.
Activate the instrument cluster if it is not already
activated by pressing the J button on the instrument
cluster.
Avoid this engine speed, as it may result in serious
engine damage that is not covered by the
Mercedes-Benz Limited Warranty.
Press button è or ÿ on the multifunction
steering wheel repeatedly until the trip odometer
appears if it is not displayed. See page 88.
To help protect the engine, the fuel supply is interrupted
if the engine is operated within the red marking.
Press button J on the instrument cluster to reset trip
odometer.
Instrument cluster
83
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Multifunction steering wheel, multifunction display
Multifunction steering wheel, multifunction display
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Depending on your vehicle’s equipment, you may use
the buttons on the multifunction steering wheel to call
up, control and set the following systems in the
multifunction display:
Press the è or ÿ button repeatedly until the
required system is displayed.
Pressing the è button advances the display to the
next system.
Pressing the ÿ button returns the display to the
previous system.
1 Trip and main odometer, see page 88
Vehicle speed, see page 88
Flexible service system (FSS), see page 105
Engine oil level indicator, see page 108
You may call up additional displays within some of these
categories by pressing the j or k button.
2 Audio systems, see page 89
Warning!
Radio, see page 89
A driver’s attention to the road must always be his/
her primary focus when driving.
CD player (optional), see page 90
Cassette player, see page 91
For your safety and the safety of others, selecting
features through the multifunction steering wheel
should only be done by the driver when traffic and
road conditions permit it to be done safely.
Programming individual settings in the system can
only be made while the vehicle is at standstill.
3 Navigation system (optional), see page 97
4 Malfunction message memory, see page 100
5 Individual settings, see page 102
6 Trip computer, see page 98
After start
After reset
Fuel tank content
7 Telephone (if so equipped), see page 92
Multifunction steering wheel, multifunction display
85
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Multifunction steering wheel, multifunction display
86
Turn the electronic key in steering look to position 1
or 2.
1
Press button:
3 è for next system
2
4 ÿ for previous system
OFF
ESU
5 j for next display in system
6 k for previous display in system
7 æ to increase the volume
8 ç to decrease the volume
9 í to dial a telephone number, see page 92
R
M
E
6
5
8
7
4
10
9
3
See page 96 for instructions on answering an
incoming call.
TEL
10 ì to end a call
1 Multifunction steering wheel
2 Multifunction display
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the è or ÿ button repeatedly until the
Note:
required system is displayed.
The displays in the multifunction display can be set to
German, English, French, Italian or Spanish language.
See the “TEXT” individual setting on page 102 for
instructions on changing the language setting.
Pressing the è button advances the display to the
next system.
Pressing the ÿ button returns the display to the
previous system.
The displays for the audio systems (radio, CD player,
cassette player) will appear in English, regardless of the
language selected.
You may call up additional displays in some systems by
pressing the j or k button.
Multifunction steering wheel, multifunction display
87
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Multifunction steering wheel, multifunction display
Trip and main odometer and sub menu
88
1 Trip and main odometer
See page 83 for instructions on resetting the trip
odometer.
2 Vehicle speed
3 FSS (Flexible service system), see page 105.
4 Engine oil level indicator, see page 108.
Press è or ÿ button repeatedly until the trip and
main odometer display (1) appears.
Press the j or k button repeatedly until the
required display (2, 3, 4, 1) appears.
Pressing the è or ÿ button displays the next or
previous system.
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio systems
Radio
1 Audio system is switched off.
2 The radio is switched on.
3 Wave band setting and memory location number,
where appropriate.
4 Station frequency.
5 This only appears when “MEMORY” rather than
“FREQUENCY” has been selected in the individual
setting menu “STATION SEARCH USING”. See
page 102.
The radio must be switched on.
Press the è or ÿ button repeatedly until
display (2) appears.
Press button j or k repeatedly until the required
station or frequency is displayed.
Use the j of k button to select a stored station or
station frequency. This depends on the selection made
in the “STATION SEARCH USING” setting menu.
Pressing the è or ÿ button displays the next or
previous system.
P54.30-2936-27
Multifunction steering wheel, multifunction display
89
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Multifunction steering wheel, multifunction display
90
CD player (optional)
1 Audio system is switched off.
2 The CD player is switched on.
3 The number of the CD currently playing is displayed
if you are using a CD changer.
4 Track number.
The radio must be switched on.
The CD player must be switched on.
Press the è or ÿ button repeatedly until
display (2) appears.
Press the j or k button repeatedly until the
required track number (4) is displayed.
Pressing the è or ÿ button displays the next or
previous system.
Note:
To select a CD from the magazine (only vehicles
equipped with CD changer), press a number on the
audio system or the (optional) COMAND system key pad
located in the center dashboard.
Download from Www.Somanuals.com. All Manuals Search And Download.
Cassette player
1 Audio system is switched off.
2 The cassette player is switched on.
3 Side being played.
The radio must be switched on.
The cassette player must be switched on.
Press the è or ÿ button repeatedly until
display (2) appears.
Pressing the j button fast forwards on to the next
track.
Pressing the k button rewinds the cassette to the
beginning of the current track.
Pressing the è or ÿ button displays the next or
previous system.
Notes:
To select the reverse side of the tape, press button below
track number on the audio system display, or enter
request on the (optional) COMAND system located in
the center dashboard.
To eject the inserted tape, press “EJ” on the audio
system (see page 131) or “EJT” on the (optional)
COMAND system.
Multifunction steering wheel, multifunction display
91
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Multifunction steering wheel, multifunction display
92
Telephone
1 The telephone is switched off.
Telephone book
2 The vehicle is currently outside the transmitter or
receiver range.
3 The telephone is ready for use.
4 Name selected from the telephone book.
5 Number for the name selected. Dialing commences.
6 Dialing is completed. The name is displayed. The
display remains for the duration of the call.
7 Duration of call.
8
8 Memory location number.
P54.30-3578-27
Download from Www.Somanuals.com. All Manuals Search And Download.
The telephone must be switched on.
Press the í button when the name you require
appears in the display (4). The telephone number (5) is
dialed.
Press the è or ÿ button repeatedly until the
display (3) appears. Refer to the separate telephone
instruction manual.
The name will be displayed when dialing is completed.
Display (6) remains for the duration of the call.
Pressing j or k “browses” alphabetically
forwards or backwards through the telephone book,
providing it was previously downloaded. See telephone
operator’s manual for details concerning downloading.
Pressing button j or k for longer than a second
“browses” rapidly through the telephone book.
The name selected appears in the display.
Pressing the ì button hangs up and display (3)
appears.
Pressing the è or ÿ button displays the next or
previous system.
Note:
Press the ì button if you do not wish to make a call.
The procedure is cancelled and display (3) appears.
Multifunction steering wheel, multifunction display
93
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Multifunction steering wheel, multifunction display
Redialing
94
1 The telephone is ready for use.
2 Number or name stored in the redial memory.
3 Number in the redial memory – redialing has
commenced.
4 Dialing is completed and the name stored in the
telephone book is displayed or the number dialed
will remain displayed if no name has been stored.
The display remains for the duration of the call.
5 Duration of call.
6 Memory location numbers — the 10 most recently
dialed numbers are stored.
L0, most recently dialed number,
L1 to L9, previously dialed numbers.
P54.30-3580-27
Download from Www.Somanuals.com. All Manuals Search And Download.
The telephone must be switched on.
Press the í button when the required number or
name appears in the display (2).
The telephone number (3) is dialed.
Press the è or ÿ button repeatedly until the
display (1) appears.
Once dialing is completed the name (4) is displayed if
the name is stored in the telephone book; failing that
the number dialed will remain displayed. The display
remains for the duration of the call.
Pressing the í button activates the redial memory
and the most recently dialed number is displayed.
Pressing the j or k button “browses” forwards or
backwards through the redial memory. The number or
name selected appears in the display.
Pressing the ì button hangs up and display (1)
appears.
Note:
Pressing the è or ÿ button displays the next or
previous system.
Press the ì button if you do not wish to make a call.
The procedure is cancelled and display (1) appears.
Multifunction steering wheel, multifunction display
95
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Multifunction steering wheel, multifunction display
Incoming call
96
1 “CALL” — you are being called
Press the í button to answer the call.
Press the ì button to hang up or if you do not wish
to answer the incoming call.
The telephone must be switched on.
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigation system (optional)
1 The navigation system is switched off.
2 The navigation system is switched on but no
destination has been specified.
3 The navigation system is switched on and
destination guidance is active.
Press the è or ÿ button repeatedly until the
required system is displayed.
See the separate COMAND (Cockpit Management and
Data System) operator’s manual for notes on the
navigation system.
Pressing the è or ÿ button displays the next or
previous system.
P54.30-2985-27
Multifunction steering wheel, multifunction display
97
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Multifunction steering wheel, multifunction display
Trip computer
98
1 “AFTER START” – trip odometer records distance
from first engine start after more than five hours of
electronic key not being in steering lock position 2
2 “AFTER RESET” – trip odometer records distance
from first engine start until reset
3 Estimated driving range remaining and fuel tank
contents
4 Distance covered “AFTER START” respectively
“AFTER RESET”
5 Elapsed time “AFTER START” respectively
“AFTER RESET”
6 Average speed “AFTER START” respectively
“AFTER RESET”
7 Average fuel consumption “AFTER START”
respectively “AFTER RESET”
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the button è or ÿ repeatedly until the
display (1) appears.
To reset the “AFTER START” (1) or “AFTER RESET” (2)
odometer memory at any time:
Press the j or k button until the display for trip
odometer memory “AFTER START” (1) and
“AFTER RESET” (2), or the display (3) for estimated
driving range remaining and fuel tank contents
appears.
Call up the relevant display (1 or 2) using the j or
k button and press the J button in the instrument
cluster until the values are reset to “0”.
The “AFTER START” trip odometer reading is
automatically reset after four hours of electronic key not
being in steering lock position 2.
Important!
The reading in the display “TANK CONTENT” might be
off by approximately +/– 2.2 US qt (2 l). Please refuel in
time.
Pressing the è or ÿ button displays the next or
previous system.
Note:
The “AFTER START” display (1) always appears when
the trip computer is called up.
Multifunction steering wheel, multifunction display
99
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
100
Car care
Index
Multifunction steering wheel, multifunction display
Malfunction/warning message memory
1 There are no messages stored in the system
2 Number of messages stored in the system
Press the è or ÿ button repeatedly until the
malfunction message memory (1 or 2) is displayed.
Press the j or k button if display (2) appears.
The stored malfunction messages will now be displayed
in order. See page 230 for malfunction and warning
messages. Display (2) will reappear after you have
scanned all the malfunction messages.
Should any malfunction or warning messages be stored
while driving, they will reappear in the display (2) when
the electronic key in steering lock is turned to position 0
or removed from the steering lock.
Download from Www.Somanuals.com. All Manuals Search And Download.
Specific malfunctions can be recalled by pressing
button J. Each malfunction or warning message must
be acknowledged by pressing button J. Once all
messages are cancelled, the odometer display should
reappear.
Important!
Malfunction and warning messages are only indicated
for certain systems and displayed to a low level of detail.
The malfunction and warning messages are simply a
reminder with respect to the operation of certain
systems and do not replace the driver’s responsibility to
maintain the vehicle’s operating safety by having all
required maintenance and safety checks performed on
the vehicle and by bringing the vehicle to an authorized
Mercedes-Benz Center to address the malfunction and
warning messages. See page 224.
Pressing the J button in the instrument cluster
immediately switches to the next malfunction message.
The malfunction message memory will be cleared when
the electronic key is turned in the steering lock to
position 1 or 2. Should any subsequent malfunctions
occur, they will be displayed in the malfunction
message memory.
Pressing the è or ÿ button displays the next or
previous system.
Multifunction steering wheel, multifunction display
101
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
102
Car care
Index
Multifunction steering wheel, multifunction display
Individual settings
R
8
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Preliminary display of the individual settings
8 “STATION SEARCH USING” – radio adjustment
2 “SET TIME HOURS”
“FREQUENCY” – use the j or k button to
select a frequency
(Only vehicles without COMAND)
“MEMORY” – use the j or k button to select
a stored station (preset memory)
3 “SET TIME MINUTES”
(Only vehicles without COMAND)
9 See page 104 for instructions on returning the
4 “12/24 HOURS” – the unit set is displayed in the
instrument cluster
setting menus to the factory settings
(Only vehicles without COMAND)
10 Selection marker – indicates the setting selected
5 “TEMP. INDICATOR” – the unit set is displayed in
the outside temperature display in the instrument
cluster and in the automatic climate control display
Notes:
These settings may only be performed with the vehicle
at standstill and with the key in steering lock position 1
or 2.
6 “DISPLAY VALUES IN” – the unit set is displayed in
the trip and main odometer
7 “TEXT” – sets the language used in the
multifunction display
Multifunction steering wheel, multifunction display
103
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
104
Car care
Index
Multifunction steering wheel, multifunction display
Press the è or ÿ button repeatedly until the
To return setting menus (4 to 8) to their factory settings:
individual setting preliminary display (1) appear.
• Call up the individual setting preliminary
Press the j or k button until the required setting
display (1).
menu (2 to 8) is displayed.
• Press the J button in the instrument cluster for
Pressing the æ or ç button sets the time in
setting menus (2, 3) and controls the selection marker
in setting menus (4 to 8).
approximately 3 seconds. Display (9) will appear.
• Press the J button once more, the message
“RESET TO FACTORY SETTINGS” appears in the
display.
The settings made are stored and applied immediately.
The individual setting preliminary display (1) will
appear again after you have run through all the setting
menus.
The individual setting preliminary display (1) will
appear if you do not press the J button within
about 5 seconds. The setting menus will not be
reset.
Pressing the è or ÿ button displays the next or
previous system.
Setting the audio volume
Notes:
You can only adjust the volume of the system currently
in use. The volume setting for each system (audio,
telephone, navigation and voice control system) is stored
separately.
Settings can only be selected with the vehicle stationary
or moving slowly.
The individual setting preliminary display (1) will
appear if you speed up.
Setting button:
The setting menu previously called up will reappear
when the vehicle stops or slows down, providing no
other system has been called up in the meantime.
æ increases the volume.
ç reduces the volume.
Download from Www.Somanuals.com. All Manuals Search And Download.
Flexible service system (FSS)
(Service indicator)
The message is displayed for approx. 10 seconds when
turning the electronic key in steering lock to position 2,
or while driving when reaching the service warning
threshold.
The symbols and messages indicate the type of service
to be performed:
9 Service A
½ Service B
10
One of the following messages will appear in the display
(e.g. Service A):
“SERVICE A – IN xx DAYS”
“SERVICE A – IN xx MILES” (Canada: KM)
“SERVICE A – EXCEEDED BY xx DAYS”
“SERVICE A – EXCEEDED BY xx MILES” (Canada: KM)
“SERVICE A – DUE NOW”
The FSS permits a flexible service schedule that is
directly related to the operating conditions of the
vehicle.
The next service due date is displayed either in days or
in miles, depending on your driving style.
The symbol 9 or ½ appears together with a
message in the multifunction display prior to the next
suggested service. Depending on operating conditions
throughout the year, the next service is calculated and
displayed in days or distance remaining.
Once the suggested service term has passed, the symbol
and message appear for approx. 30 seconds and a signal
sounds every time when turning the electronic key in
steering lock to position 2.
Flexible service system
105
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
106
Car care
Index
Flexible service system
The service indicator disappears automatically after
30 seconds or if button J on the instrument cluster is
pressed.
Notes:
When disconnecting vehicle battery for one or more
days at a time, such days will not be counted. Any such
days not counted by the FSS can be added by your
Mercedes-Benz Center.
Calling up service indicator manually:
Turn the electronic key in steering lock to position 1
or 2.
The interval between services is determined by the type
of driving for which the vehicle is used. For example,
driving at extreme speeds, and cold starts combined
with short distance driving in which the engine does not
reach operating normal temperature, reduce the interval
between services.
Call up the trip odometer and main odometer, by
pressing button è or ÿ on the multifunction
steering wheel until the display appears. See page 88.
Press button j or k until the FSS indicator
appears.
Pressing the è or ÿ button displays the next or
previous system.
Important!
The FSS indicator does not include an engine oil level
indicator. See page 108 for engine oil level indicator.
Download from Www.Somanuals.com. All Manuals Search And Download.
Following a completed A or B service the
Mercedes-Benz Center sets the counter mileage to
10 000 miles (Canada: 15 000 km).
The multifunction display will show the question:
“DO YOU WANT TO RESET SERVICE INTERVAL? –
CONFIRM BY PRESSING R”
The counter can also be set by any individual. To do so:
Turn the electronic key in steering lock to position 2.
Press button J on the instrument cluster again for
approximately 4 seconds, and hold until a signal
sounds. The message “SERVICE INTERVAL HAS BEEN
RESET” appears in the multifunction display.
To call up the trip odometer and main odometer, press
button è or ÿ on the multifunction steering
wheel until the display appears. See page 88.
The new service indicator is displayed with the reset
distance of 10 000 miles (Canada 15 000 km).
Press button j or k until the FSS indicator
appears.
If the FSS counter was inadvertently reset, have a
Mercedes-Benz Center correct it.
Press button J on the instrument cluster for
Only reset if the proper service has been performed.
Resetting the system without performing proper service
as called for by the FSS will cause the FSS to incorrectly
determine the next service interval which will result in
engine damage not covered by the Mercedes-Benz
Limited Warranty.
approximately 4 seconds.
However you choose to set your reference numbers, the
scheduled services as posted in the Service Booklet
must be followed to properly care for your vehicle.
Flexible service system
107
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
108
Car care
Index
Engine oil level indicator
Engine oil level indicator
Turn the electronic key in steering lock to position 2.
To call up the trip odometer and main odometer, press
button è or ÿ on the multifunction steering
wheel until the display appears. See page 88.
Press button j or k on the multifunction
steering wheel repeatedly until the “MEASUREMENT
CORRECT – ONLY IF VEH. LEVEL” engine oil level
indicator appears. This indicator is only a reminder.
Measurement can be cancelled by pressing button j
or k if the vehicle is not parked on level ground. An
incorrect reading will be displayed if you do not cancel
the measurement. Move the vehicle to level ground and
measure again.
The electronic key in steering lock is not in position 2 if
the “ENGINE OIL LEVEL – SWITCH ON IGNITION”
message appears.
To check the engine oil level, park vehicle on level
ground, with engine at normal operational temperature.
The “ENGINE OIL LEVEL – MEASURING NOW”
message is displayed after approximately 3 seconds.
Check oil level approximately 5 minutes after turning
off the engine, allowing for the oil to return to the oil
pan.
Download from Www.Somanuals.com. All Manuals Search And Download.
One of the following messages will subsequently appear
on the indicator:
Perform the engine oil level check with the dipstick, if it
cannot be completed via the multifunction display.
See page 252.
“ENGINE OIL LEVEL – O.K.”
No oil needs to be added.
In this case we recommend that you have the system
checked at a Mercedes-Benz Center.
“ENGINE OIL LEVEL – ADD 1.0 QUART”
(Canada: 1.0 L)
Note:
“ENGINE OIL LEVEL – ADD 1.5 QUART”
(Canada: 1.5 L)
See malfunction and warning messages on page 230
and page 240 if an engine oil level indicator appears on
the multifunction display when the engine is running.
“ENGINE OIL LEVEL – ADD 2.0 QUART”
(Canada: 2.0 L)
The engine oil level cannot be checked while the engine
is running. The “ENGINE OIL LEVEL – NOT WHEN
ENGINE ON” message will appear.
See page 252 for instructions on adding engine oil.
“ENGINE OIL LEVEL – REDUCE OIL LEVEL”
Do not overfill the engine.
Excessive oil must be siphoned or drained off. It could
cause damage to the engine and catalytic converter not
covered by the Mercedes-Benz Limited Warranty.
Engine oil consumption
Engine oil consumption checks should only be made
after the break-in period. During the break-in period,
higher oil consumption may be noticed and is normal.
Frequent driving at high engine speeds results in
increased consumption.
The message “MEASURING NOT POSSIBLE” will be
displayed if a proper oil level check cannot be
performed. The engine oil level check can be repeated
after a short time.
Engine oil level indicator
109
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
110
Car care
Index
Exterior lamp switch
Exterior lamp switch
B Low beam plus parking lamps or high beam
headlamps (combination switch pushed forward)
ˆ Standing lamps, right (turn left one stop)
‚ Standing lamps, left (turn left two stops)
… Front fog lamps (pull out one stop) with parking
lamps and/or low beam headlamps on. Green
indicator lamp in lamp switch comes on.
„ Rear fog lamp (pull out to 2nd detent) in addition
to fog lamps. Yellow indicator lamp in lamp switch
comes on.
Standing lamps
When the vehicle is parked on the street the standing
lamps (right or left side parking lamps) can be turned
on, making the vehicle more visible to passing vehicles.
D Off
C Parking lamps (also side marker lamps, taillamps,
license plate lamps, instrument panel lamps)
Canada only: When the engine is running, the low
beam is additionally switched on.
The standing lamps cannot be operated with the
electronic key in steering lock position 2.
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
Daytime running lamps (Canada only)
With the electronic key removed and the driver’s door
open, a warning sounds and the message “SWITCH OFF
LIGHTS” in the multifunction indicator appears if the
vehicle’s exterior lamps (except standing lamps) are not
switched off.
When the engine is running and the selector lever is in
a driving position, the low beam headlamps (includes
parking lamps, side marker lamps, taillamps and
license plate lamps) are automatically switched on.
When shifting from a driving position to position “N”
or “P”, the low beam switches off (2 seconds delay).
Fog lamps will operate with the parking lamps and/or
the low beam headlamps on. Fog lamps should only be
used in conjunction with low beam headlamps. Consult
your State or Province Motor Vehicle Regulations
regarding allowable lamp operation.
For nighttime driving the exterior lamp switch should
be turned to position B to permit activation of the
high beam headlamps.
Fog lamps are automatically switched off when the
exterior lamp switch is turned to position D.
Night security illumination
When exiting the vehicle after driving with the exterior
lamps on, they switch on again for added illumination
for approximately 30 seconds after closing the last door.
Exterior lamp switch
111
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
112
Car care
Index
Headlamp cleaning system
Headlamp cleaning system (optional)
The switch is located in the center console.
The headlamp washer can be activated with the
electronic key in steering lock position 2.
Briefly press symbol side of switch.
P82.15-2007-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Combination switch
3 High beam flasher (high beam available
independent of exterior lamp switch position)
4 Turn signals, right
5 Turn signals, left
4
4
To signal minor directional changes, such as changing
lanes on a highway, move combination switch to the
point of resistance only and hold it there.
2
To operate the turn signals continuously, move the
combination switch past the point of resistance (up or
down). The switch is automatically canceled when the
steering wheel is turned to a large enough degree.
1
3
5
5
P54.25-2034-26
Turn signal failure
1 Low beam (exterior lamp switch position B)
If one of the turn signals fails, the turn signal indicator
system flashes and sounds at a faster than normal rate.
2 High beam (exterior lamp switch position B)
Combination switch
113
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
114
Car care
Index
Combination switch
7 Windshield wiper
7
0
I
Wiper off
Intermittent wiping
(optional rain sensor: One initial wipe, pauses
between wipes are automatically controlled by a
rain sensor monitoring the wetness of the
windshield.)
Notes:
With switch in this position, one wipe occurs
when turning the electronic key in steering lock
from position 0. However, this might cause
scratches on a dry windshield. Turn combination
switch to Off position before turning the
6
P54.25-2033-26
6 Control for windshield wiper/washer system:
electronic key in steering lock from position 0.
Push briefly for single wipe without adding washer
fluid (use only when windshield is wet).
Optional rain sensor:
Do not leave in intermittent setting when vehicle
is taken to an automatic car wash or during
windshield cleaning. Wiper will operate in
presence of water spray at windshield, and wiper
may be damaged as a result.
Push past detent and hold to activate wiper and
washer.
Notes:
The windshield washer reservoir, hoses and nozzles are
automatically heated.
II Normal wiper speed
III Fast wiper speed
See page 255 for refilling windshield washer/headlamp
cleaning system.
Download from Www.Somanuals.com. All Manuals Search And Download.
Vehicles without rain sensor:
Hazard warning flasher switch
If the vehicle is standing still, the wiper will switch back
to setting I, intermittent wiping.
Windshield wiper smears
If the windshield wiper smears the windshield, even
during rain, activate the washer system as often as
necessary. The fluid in the washer reservoir should be
mixed in the correct ratio, see page 255.
Blocked windshield wiper
If the windshield wiper becomes blocked (for example,
due to snow), switch off the wiper.
For safety reasons before removing ice or snow, remove
electronic key from steering lock. Remove blockage.
The hazard warning flasher can be activated with the
switch located in the dashboard.
Activate combination switch again (electronic key in
steering lock position 1).
To activate hazard warning flasher, press switch once.
To deactivate, press switch again.
Note:
With the hazard warning flasher activated, the
combination switch in position for either left or right
turn, and the electronic key in steering lock position 2,
only the respective left or right side turn signals will
operate.
Hazard warning flasher
115
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
116
Car care
Index
Automatic climate control
Automatic climate control
3
3
4
1
2
5
P83.40-2157-29
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Air volume control for center air outlets, turn wheel
The system will not heat or cool any quicker by setting a
higher or lower temperature.
up to open.
The automatic climate control removes considerable
moisture from the air during operation in the cooling
mode. It is normal for water to drip on the ground
through ducts in the underbody.
2 Air volume control for side air outlet.
To open air outlets: Turn wheel to position i.
3 Center air outlet, adjustable
The desired interior temperature can be selected
separately for the left and right side of the passenger
compartment.
4 Side air outlet, adjustable
5 Display and controls
The system is always at operational readiness, except
when manually switched off.
Note:
If the individual settings (page 102) of the outside
temperature display is switched from °C to °F or vice
versa, the automatic climate control returns to the
factory settings. Set temperature and activate S
mode.
The automatic climate control only operates with the
engine running.
The temperature selector should be left at the desired
temperature setting. The temperature selected is
reached as quickly as possible.
Automatic climate control
117
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
118
Car care
Index
Automatic climate control
Display and controls
P Defrost
O Air recirculation
F Rear window defroster
b Air distribution, manual
S Economy mode
ï Air volume, manual
T Residual engine heat utilization
0
MAX
Basic setting - automatic mode
Press left and right U button for automatic mode.
Simultaneously press both f and g buttons for
temperature setting of 72°F.
Press the desired button to activate, indicator lamp is on
while activated.
U Automatic mode
f Raise temperature
g Lower temperature
Air volume and distribution are controlled
automatically.
This setting can be used all year around.
Download from Www.Somanuals.com. All Manuals Search And Download.
Economy
Defrosting
Turn wheels (2) to position i to open left and right
side air outlets (4). Adjust side air outlets upward.
The function of this setting corresponds to the
automatic mode. However, because the air conditioning
compressor will not engage (fuel savings), it is not
possible to air condition in this setting.
Press P button. Maximum heated and automatically
controlled amount of air is directed to the windshield
and side windows.
Press S button to activate.
Press S button once again to return to previous
setting.
Press P button once again to return to previous
setting.
Special settings (use only for short duration)
Defogging windows
Switch off O button.
Press left and right U buttons.
Press button b repeatedly until air is directed
upward.
Turn wheels (2) to position i to open left and right
side air outlets (4). Adjust side air outlets upward.
Automatic climate control
119
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
120
Car care
Index
Automatic climate control
Rear window defroster
Air distribution
Turn electronic key in steering lock to position 2.
To select, press F button.
Press b button for each side repeatedly until the
requested symbol is displayed.
To cancel, press F button again.
Press U button to return to automatic mode.
Notes:
Heavy accumulation of snow and ice should be removed
before activating the defroster.
Air volume
The rear window defroster consumes a large amount of
electrical power. To keep the battery drain to a
minimum, turn off the defroster as soon as the window
is clear.
Press – or + side of rocker switch ï until the
requested blower speed is attained. A choice of 7 blower
speeds is available.
To switch the automatic climate control off, press – side
The defroster is automatically turned off after a
maximum of 12 minutes of operation.
of rocker switch ï until symbol OFF is displayed.
If several power consumers are turned on
simultaneously, or the battery is only partially charged,
it is possible that the defroster will automatically turn
itself off. When this happens, the indicator lamp inside
the switch starts blinking.
The fresh air supply to the vehicle interior is shut off.
While driving, use this setting only temporarily,
otherwise the windshield could fog up.
To switch the automatic climate control on again, press
U, P or +side of ï.
As soon as the battery has sufficient voltage, the
defroster automatically turns itself back on.
Download from Www.Somanuals.com. All Manuals Search And Download.
Air recirculation
Residual engine heat utilization
This mode can be selected to temporarily reduce the
entry of annoying odors or dust into the vehicle’s
interior.
With the engine switched off, it is possible to continue
heating the interior for a short while.
Air volume and distribution are controlled
automatically.
Outside air is not supplied to the vehicle’s interior.
To select, press O button.
To select:
To cancel, press O button again.
Turn electronic key in steering lock to position 1 or 0 or
remove key.
The system will automatically switch from recirculated
air to fresh air
Press T button
• after approx. 5 minutes at outside temperatures
This function selection will not activate if the battery
charge level is insufficient.
below approx. 41°F (5°C),
• after approx. 30 minutes at outside temperatures
above approx. 41°F (5°C),
To cancel:
• after approx. 5 minutes, if button S is pressed.
Press T button.
If the windows should fog up from the inside, switch
from recirculated air back to fresh air.
The system will automatically shut off
• if you turn electronic key in steering lock to
At high outside temperatures, the system automatically
engages the recirculated air mode thereby increasing
the cooling capacity performance, switching to partially
fresh air within 30 minutes.
position 2,
• after approx. 30 minutes,
• if the battery voltage drops.
Automatic climate control
121
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
122
Car care
Index
Automatic climate control
Dust filter
Important!
Nearly all dust particles and pollen are filtered out
before outside air enters the passenger compartment
through the air distribution system.
This vehicle is equipped with an air conditioner system
that uses R–134a (HFC: hydrofluorocarbon) as a
refrigerant. Repairs should always be performed by a
qualified technician, and refrigerant should be collected
in a recovery system for recycling.
Note:
Keep the air intake grille in front of windshield free of
snow and debris.
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio and telephone, operation
Operating safety
Warning!
These instructions are intended to help you become
acquainted with your Mercedes-Benz vehicle radio.
They contain useful tips and a detailed description of
the user functions.
Any alterations made to electronic components can
cause malfunctions.
The radio, cassette deck, CD changer1, telephone1
and voice control system1 are interconnected.
When one of the components is not operational or
has not been removed/replaced properly, the
function of other components may be impaired.
Warning!
In order to avoid distraction which could lead to an
accident, system settings should be entered with
the vehicle at standstill and systems should be
operated by the driver only when traffic conditions
permit. Always pay full attention to traffic
conditions first before operating system controls
while driving.
This condition might seriously impair the
operating safety of your vehicle.
We recommend that you have any service work on
electronic components carried out by an
authorized Mercedes-Benz Center.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is covering
a distance of approximately 50 feet (approximately
14 m) every second.
1
Optional equipment
The right to correct errors and make technical amendments is
reserved.
Audio system
123
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
124
Car care
Index
Audio system
Operating and display elements
1 On/off, volume, see page 127
7 Display panel
The cassette slot is located behind the display panel.
For notes on playing cassettes, see page 131.
2 Telephone mode selector, see page 139
3 Seek, see page 129, 133 and 137
4 Radio mode selector, see page 129
8 Alpha-numeric keypad for
station storage and frequency entry, see page 130
CD/Track access, see page 138
optional telephone, see page 139
5 Tune, see page 129 and 130
Fast forward/reverse, see page 133
9 Function button, see page 130 and 138
6 CD mode selector, see page 136
Download from Www.Somanuals.com. All Manuals Search And Download.
10 Soft keys for
radio band selection, see page 129
tone controls, see page 127
scan, see page 130
Tape eject, see page 132
Tape track select, see page 132
Dolby, see page 134
CD Random/repeat, see page 138
11 Tape mode selector, see page 131
Anti-theft system
If the power supply to the
radio has been interrupted,
“CODE” will appear on the
display when it is next
The code number is shown on the Radio code card,
supplied with the radio.
switched on. The radio will
only work after the five-digit code has been entered
using the buttons on the right-hand control panel.
Important!
Never leave the Radio code card in the vehicle. Keep it in
a safe place.
Audio system
125
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
126
Car care
Index
Audio system
Entering the code number
Button and soft key operation
Switch on the radio. “CODE” will appear on the display.
Using the buttons on the alpha-numeric keypad, enter
the five digit code. Confirm by pressing the “OK” key.
In these instructions, the alpha-numeric keypad (right
side of radio face) and the function buttons (left side of
the radio face) are referred to as “buttons” and the four
keys under the display are referred to as “soft keys”.
If an incorrect code has been entered and confirmed,
“CODE” will reappear on the display. The correct code
must be entered once again.
Note:
Do not press directly on the radio display face.
If an incorrect code is entered
three times, “WAIT” will
appear on the display and the
radio will be locked out for
about 10 minutes.
Note:
The lock out time will only count down if the radio is left
switched on.
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Audio functions
The AUD key is used to select the BASS, TREBLE and
BALANCE functions. Settings for bass and treble are
stored separately for the cassette and CD modes. Tone
level settings are identified by the vertical bars. The
center (flat) setting is shown by one longer bar in the
center of the display.
Switching on and off
Press the control knob
.
The radio is switched off when the ignition key is turned
to position 0 or removed from the ignition. The radio is
switched on again when the ignition key is turned to
position 1 or 2.
Bass
Note:
Press the AUD key repeatedly
until “BASS” appears in the
display.
The radio can also be switched on even if the ignition
key is not inserted, but will switch itself off
automatically after one hour to conserve vehicle battery
power.
Treble
Adjusting the volume
Press the AUD key repeatedly
until “TREBLE” appears in the
display.
Turn the control knob - turning the knob clockwise will
increase the volume, counterclockwise will decrease the
volume.
Press the “+” key to increase
or the “-” key to decrease the level.
Audio system
127
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
128
Car care
Index
Audio system
Fader1
Centering all audio functions
Press the AUD key repeatedly
until “FADER” appears on the
display. Press the “R” key to
move the sound to the rear
speakers or the “F” key to
Push and hold down the
“AUD” key. All audio
functions (bass, treble,
balance and fader) are set to
center or flat positions, and
move the sound to the front speakers.
the volume is adjusted to a pre-set level.
Balance
Press the AUD key repeatedly
until “BALANCE” appears in
the display.
Press the “L” key to move the
sound to the left speaker or the “R” key to move the
sound to the right speaker.
1
not available on all models
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio mode
Manual tuning
Press either the
or
Selecting radio mode
button. Step-by-step tuning in
ascending or descending
order of frequency will take
place.
Press
button.
Selecting the band
The first three tuning steps will take place without
muting. The radio will then be muted and high-speed
tuning will take place until the button is released.
The following tuning intervals will be shown on the
display:
Press the key located below
the desired band. The band
selected is shown in the top
line of the display.
FM
AM
WB
200 kHz
10 kHz
Channels 1-7
Frequency ranges:
FM
87.9 - 107.9 MHz
530 - 1710 kHz
approx. 162 MHz
AM
WB
Seek tuning
Press either the
or
button. The radio will tune
to the next receivable station.
Audio system
129
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
130
Car care
Index
Audio system
Scan tuning
Storing stations
Press the SC key. Each strong
receivable station on the band
selected will be tuned in for
8 seconds. The first scan will
tune only the stations with a
Hold the number button down for approximately
2 seconds. The currently displayed frequency is stored
on the selected station button. The storage procedure is
confirmed by a short signal tone.
high signal strength. The second scan will tune every
receivable station. By pressing either the
or buttons, or the “SC” key the scan mode
Retrieving a station from memory
,
,
Press the desired station button.
can be cancelled.
Direct frequency input (AM and FM only)
Station memory
Select the band. Press the
“ button and enter the
desired frequency using the
alpha-numeric keypad.
Frequencies outside of the
Ten stations can be stored in
the AM and FM bands via the
alpha-numeric keypad. The
“0” button corresponds to
location 10. Weatherband
frequency ranges (frequencies specified on page 129)
will not be accepted. The frequency input mode is
cancelled if no button is pressed within 4 seconds.
(WB) channels 1 to 7 can be retrieved via the alpha-
numeric keypad and are preset at the factory.
Download from Www.Somanuals.com. All Manuals Search And Download.
Cassette mode
Note:
Do not press directly on the radio display face.
Note:
Return the display panel to its normal position by
folding it back up and pressing gently on the display
frame to lock in place.
Vehicles equipped with the COMAND system do not
come with a factory installed cassette mechanism.
A standard 1/8” stereo phono plug for auxiliary audio
input (located in glove box) is provided for connection of
a portable battery operated cassette player or any other
portable device which uses a headphone output. Please
refer to the COMAND operating manual for information
concerning the activation of the audio input.
When playing mono recorded tapes (e.g. books) through
a stereo system the sound from one track might bleed to
the other track, despite setting the balance to the full
left or full right speakers.
Important!
If the display is in the down position for more than
20 seconds, 2 successive beeps will be heard. This will
continue at 5 second intervals until the display is
returned to its normal position.
Playing cassettes
Press the “TAPE” button. When the eject (EJ) key is
pressed, the display folds down and the cassette slot
becomes visible. Push the cassette into the slot until it
engages. The cassette will be pulled in automatically.
Audio system
131
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
132
Car care
Index
Audio system
The radio will switch to
Cassette eject
cassette mode. Track 1 will be
played and “SIDE 1”
displayed. Track 1 is the side
of the cassette which is facing
Press the eject (EJ) key. The display will fold down and
the cassette will be ejected. Remove the cassette, then
fold the display back up manually. The radio will switch
back to radio mode automatically.
upwards. The cassette deck will automatically detect the
type of tape and switch the equalization automatically.
A cassette symbol in the display indicates that a tape is
in the mechanism. This symbol appears in all modes but
not in cassette mode.
Note:
The cassette will not be ejected when the radio is
switched off.
The cassette will not be ejected when the radio is
switched off or another mode is selected.
Important!
If the display is in the down position for more than
20 seconds, 2 successive beeps will be heard. This will
continue at 5 second intervals until the display is
returned to its normal position.
If a cassette is in the
mechanism, cassette mode
can be selected by using the
“TAPE” button. If no cassette
has been inserted, the display
will show “NO TAPE”.
Track selection
Press the track selection
(TRK) key. The current track
will be displayed as “SIDE 1”
or “SIDE 2”. The track will be
changed automatically at the
end of the tape.
Download from Www.Somanuals.com. All Manuals Search And Download.
Track search forwards/backwards
Fast forward/reverse
Press the
button.
Press the
button.
“SEEK FWD” will be shown on
the display and the track
search will run the tape
forwards to the start of the
next track.
“FORWARD” will appear on
the display and fast forward
will start.
Press the
button.
“REWIND” will appear on the
display and fast reverse will
start.
Press the
“SEEK RWD” will be shown
on the display and the track
search will run the tape
backwards to the start of the
button.
Fast forward/reverse is stopped by pressing the same
button again, or it will stop automatically at the
beginning or the end of the tape. The track will
automatically change at the end or beginning of the tape
and play will begin.
track currently playing. Track search can be interrupted
by pressing the same button again.
Note:
The beginning of a track can only be located if there is a
break of at least 4 seconds between tracks.
Audio system
133
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
134
Car care
Index
Audio system
Scanning
Dolby NR1 (noise reduction system)
Press the “SC” key. Each track
on the cassette will be played
for 8 seconds in ascending
order.
To enable optimum
reproduction of cassettes
recorded using the Dolby B
system, press the “AUD” key
followed by the NR key so the
Note:
“NR” in the display is not highlighted. To turn off
Dolby B noise reduction, press the “NR” key so the “NR”
in the display is highlighted.
The beginning of a track can only be located if there is a
break of at least 4 seconds between tracks.
1
Dolby and the double-D symbol Ù are trademarks of Dolby
Laboratories Licensing Corporation. The Dolby noise reduction
system is manufactured under licence from Dolby Laboratories
Licensing Corporation.
Scan will be interrupted if the
buttons or the “SC” key is pressed.
,
,
,
Download from Www.Somanuals.com. All Manuals Search And Download.
CD mode
Only use CDs, which bear the
label shown and that conform to
the compact disc digital audio
standard (IEC 60908).
General notes on CD mode
Should excessive temperatures occur while in CD mode,
“TEMP HIGH” will appear in the display and muting
will take place. The unit will then switch back to radio
mode until the temperature has decreased to a safe
operating level.
Use of CDs which do not meet this
standard may cause damage to the
CD changer. Do not play single-CDs (80 mm) with an
adapter.
Should temperatures occur while in CD mode which are
too low, “TEMP LOW” will be displayed, but the CD will
play. It will be sensitive to skipping if you are driving
over rough roads.
Warning!
The CD changer1 is a Class 1 laser product. There is
a danger of invisible laser radiation if the cover is
opened or damaged.
Handle CDs carefully to prevent interference during
playback.
Do not remove the cover. The CD changer1 does not
contain any parts which can be serviced by the
user. For safety reasons, have any service work
which may be necessary performed only by
qualified personnel.
Avoid fingerprints and dust on CDs. Do not write on the
CDs or apply any label to the CDs.
Clean CDs from time to time with a commercially
available cleaning cloth. No solvents, anti-static sprays,
etc. should be used.
1
Optional equipment
Replace the CD in its container after use. Protect CDs
from heat and direct sunlight.
Audio system
135
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
136
Car care
Index
Audio system
CD changer installed
Loading/emptying the CD magazine
Slide the changer door to the right and press the eject
button . The magazine will be ejected. Remove the
magazine. Pull out the CD tray until its stop is reached
and place the CDs in the recess of the tray, label side up.
Push the tray into the magazine in the direction shown
by the arrow. Insert the loaded magazine into the
changer.
4
2
3
1
Important!
Close the door after the magazine has been inserted.
2
Playing CDs
Press the “CD” button. The CD most recently played will
start at the point where it was last switched off. CDs
stored in the magazine can be selected by using the
station preset buttons 1-6.
1 CD changer1
2 CD magazine
3 CD tray
The magazine slot number of
the selected CD will then be
displayed after “CD”. The
number of the track being
played will be displayed after
“TRACK”.
4 CD
If a CD changer1 is installed, it can be operated from the
front control panel of the radio. A loaded magazine must
be installed for CD playing.
1
Optional equipment
Download from Www.Somanuals.com. All Manuals Search And Download.
If there is no CD in the
selected magazine slot,
“NO CD” and the
corresponding slot number
will be displayed
Fast forward/reverse
Press the
forward.
button and hold it down for audible fast
Press the
reverse.
button and hold it down for audible
(e.g.“NO CD3”). After the last track on a CD has been
played, the next CD will automatically be selected and
played.
The search will stop when the
button is released. The
relative time of the track will
be displayed during the
search. The search mode will
Skipping tracks forwards/backwards
Press the
played.
button. The next track on the CD will be
cancel if the beginning or end of the CD is reached.
Press the
button. If the track has been playing for
Scanning
more than 10 seconds, it will revert to the start of that
track. If it has been playing for less than ten seconds it
will revert to the preceding track. To skip several tracks,
the respective button must be pressed until the desired
track is reached. If the beginning or end of the CD is
reached during the search, the first or last track will be
played.
Press the SC key. Each track will be played for 8 seconds
in ascending order. The search will stop at the track in
question if the
,
,
,
buttons or the
“SC” key is pressed.
Audio system
137
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
138
Car care
Index
Audio system
Random play/repeat function
Direct track selection
The tracks of the current CD are played in random order
when the random feature (RDM) is selected. Press the
RDM key to switch on, and press RDM again to switch
off.
Tracks can be selected directly using the buttons on the
alpha-numeric keypad. Press the “ function button,
followed by the track number.
When the repeat function
(RPT) has been selected, a
particular track can be played
for as many times as desired.
Press the RPT key to switch
on, and press RPT again to switch off.
Note:
Both functions cannot be used simultaneously.
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone operation
Entering telephone number and starting dialing
process
Various functions of the Mercedes-Benz integrated
cellular telephone1 can be performed and displayed via
the car radio. Further instructions for operating the car
telephone can be found in the operation guide for the
cellular telephone1.
Enter the desired telephone
number using the alpha-
numeric keypad. The number
can have up to 32 digits, but
only 13 of these can be
displayed. The dialing process is started by pressing the
SND button. The entered number can be corrected using
the “CLR” key.
Switching the telephone on and off
Switching on: Press the
button, “TEL” appears in the
corner of the display.
Press the CLR key briefly -
and the last digit will be
deleted.
Switching off: Press and hold
button until the telephone symbol “TEL” no
the
Press the CLR key longer - and
the complete number will be deleted.
longer appears in the display, or press the “PWR” button
on the phone’s keypad.
1
Optional equipment
Calling up the phone book
The numbers stored in the telephone memory can be
called up via either name or number entries. The
memory contents from the portable phone must be
downloaded and the telephone menu must be selected
in order to call up the phone book. Refer to the
“Memory download” section of the cellular telephone
operation guide for more information.
Audio system
139
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
140
Car care
Index
Audio system
Switching between name search and number search
Press ABC key - Name search
Placing a call
When a number or a name
has been selected using the
method described above,
press the SND key.
Press NUM key - Number search
Searching and selecting phone book entries by name
Press the ABC key. The current name is shown on the
display. The stored entries in alphabetical order can be
Manual repeat dialing (redial)
The last number entered can be re-selected by pressing
the SND key once and the call can be placed by pressing
the SND key a second time. The last dialed telephone
number is shown on the display. Using the
or button, the numbers stored in the re-dial
memory of the telephone can be selected.
selected using the
or
button. By pressing the
or buttons, the stored entries can be selected
according to alphabetical initial letters (e.g. A-Adam,
B-Brown, M-Miller).
,
,
Searching and selecting phone book entries by
number
The abbreviation L and the
number in the memory are
shown in the top line of the
display.
Press the NUM key. The current number is shown on
the display. The stored entries can be selected in
numerical order using the
pressing the or
or
button. By
buttons, the stored entries
can be selected in increments of 5 (e.g. Entry no. 2,
Entry no. 7, etc.).
Download from Www.Somanuals.com. All Manuals Search And Download.
Accepting incoming call in telephone mode
Component malfunctions
With an incoming call, the ringing tone will be heard
and the message “CALL” appears in the display. Press
the SND key to answer the call.
The radio, CD changer1, and Mercedes-Benz integrated
cellular telephone1 are part of a fiberoptic networked
system. Failure of one of the components can lead to
malfunctions of the other components. Please contact
your authorized Mercedes-Benz Center or call
1-800-FOR-MERCedes for more information in the event
of a malfunction.
Accepting incoming call in tape, CD or radio mode
If the telephone is activated in the background
(telephone symbol in the display), then a switch is made
automatically to telephone when an incoming call is
received. The audio source is muted, the ringing tone is
heard and the message “CALL” appears. After the call
has been terminated, the previously selected audio
source is resumed.
1
Optional equipment
Terminating call
A current call can be terminated by pressing the END
key.
Audio system
141
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
142
Car care
Index
Interior equipment
Power windows
Release switch when window is in desired position.
Warning!
When closing the windows, be sure that there is no
danger of anyone being harmed by the closing
procedure.
The closing of the door windows can be
immediately halted by releasing the switch or, if
switch was pressed past the resistance point and
released, by either pressing switch j or k.
If the window encounters an obstruction that
blocks its path in a circumstance where you
pressed the switch past the resistance point and
released it to close the window, the automatic
reversal function will stop the window and open it
slightly.
If the window encounters an obstruction that
blocks its path in a circumstance where you are
closing the window by pressing and holding the
switch or by pressing and holding button ‹ on
the remote control, the automatic reversal function
will not operate.
When leaving the vehicle, always remove the
electronic key from the steering lock, and lock the
vehicle. Do not leave children unattended in the
vehicle, or with access to an unlocked vehicle.
Unsupervised use of vehicle equipment can cause
an accident and/or serious personal injury.
Power window switches are located on center console.
1 left, front
2 left, rear
3 right, front
4 right, rear
Turn electronic key in steering lock to position 1 or 2.
Press switch in to resistance point:
k to open
j to close
Download from Www.Somanuals.com. All Manuals Search And Download.
Express opening and closing of door windows
Notes:
Press switch k or j past resistance point and
release — window opens or closes completely.
The power windows can also be opened and closed with
the infrared remote control while locking the vehicle
doors or trunk, see page 29.
To interrupt procedure, briefly press k or j.
If the express closing function of the door windows is
interrupted, press and hold the switch j to close the
window completely.
If the upward movement of the window is blocked
during the closing procedure, the window will stop and
open slightly.
The automatic full closing procedure of the window
should now be reactivated.
When pressing and holding the switch j to close the
window, and upward movement of the window is
blocked by some obstruction including but not limited to
arms, hands, fingers etc., the automatic reversal will not
operate.
The rear windows can only be opened using the express
feature.
Synchronizing power windows
Warning!
If the power supply was interrupted (battery
disconnected or low), the windows cannot be opened or
closed (only door windows) by the Express feature.
When leaving the vehicle, always remove the
electronic key from the steering lock and lock the
vehicle. Do not leave children unattended in the
vehicle, or with access to an unlocked vehicle.
Unsupervised use of vehicle equipment can cause
an accident and/or serious personal injury.
To resynchronize the express feature, press j side of
power window switch until the window is completely
closed and hold for additional 2 seconds. Repeat
procedure for each window.
The automatic full opening and closing (only door
windows) procedure of the windows should now be
restored.
Interior equipment
143
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
144
Car care
Index
Interior equipment
Power windows – operated with soft top switch
When leaving the vehicle, always remove the
electronic key from the steering lock, and lock the
vehicle. Do not leave children unattended in the
vehicle, or with access to an unlocked vehicle.
Unsupervised use of vehicle equipment can cause
an accident and /or serious personal injury.
The soft top handle must be in the locked position to
operate the power windows.
Turn electronic key in steering lock to position 1 or 2.
To open:
Lift soft top switch quickly twice and hold.
To close:
Soft top switch is located on center console.
Press soft top switch quickly twice and hold.
Release switch when windows are in desired position.
In addition to the power window switches, the windows
can also be opened or closed with the soft top switch.
Warning!
When closing the windows, be sure that there is no
danger of anyone being harmed by the closing
procedure.
Download from Www.Somanuals.com. All Manuals Search And Download.
Interior lighting
1 Automatic interior lighting
Press once and the automatic interior lighting is
activated.
2
Interior lamps are switched on, and off (soft fade)
delayed, when unlocking or locking the vehicle, or
when opening or closing a door. However, there will
be no (soft fade) delay when the electronic key is in
steering lock position 2.
3
4
1
Press again and interior lamps remain switched off,
even when centrally unlocking or opening a door.
2 Press to switch interior and reading lamps on or off.
3 Press to switch reading lamp on or off.
P68.00-2297-26
4 Press to switch reading lamp on or off.
Entrance lamps, exit lamps in doors
The lamps are switched on and off by the door contact
switches.
Note:
To prevent the vehicle battery from being discharged,
with doors open all interior lamps go out after
approximately 5 minutes.
Interior equipment
145
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
146
Car care
Index
Interior equipment
Sun visors
Illuminated vanity mirrors
Swing sun visors down to protect against sun glare.
With the visor engaged in its inner mounting, the lamp
is switched on by opening the cover.
If sunlight enters through a side window, disengage
visor from inner mounting, pivot it to the side, and slide
it to the desired position.
Warning!
Do not use the vanity mirror while driving.
The lamp goes out automatically after approximately
5 minutes.
Download from Www.Somanuals.com. All Manuals Search And Download.
Interior
Glove box
Warning!
To help avoid personal injury during a collision or
sudden maneuver, exercise care when stowing
things. Put luggage or cargo in the trunk if
possible. Do not pile luggage or cargo higher than
the seat backs. Do not place anything on the shelf
below the rear window.
1
2
3
Luggage nets cannot secure hard or heavy objects.
Storage compartments, armrest and cup holder
Warning!
P68.00-2067-26
Keep compartment lids closed. This will help to
prevent stored objects from being thrown about
and injuring vehicle occupants during an accident
and sudden maneuvers.
1 Unlocking: Turn mechanical key to vertical position
and remove.
2 Locking: Turn mechanical key to the right and
remove.
3 Opening: Pull on handle.
The glove box can be locked and unlocked with the
mechanical key. See page 23 for instructions on how to
remove the mechanical key from the electronic key (e.g.
for valet parking service).
Interior equipment
147
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
148
Car care
Index
Interior equipment
Storage compartments in center console
To open compartment in armrest:
Press button (4) and lift lid.
To open compartment under armrest:
Press button (5) and lift lid.
To close:
Lower lid until it engages in lock.
To open cover:
Touch top of cover (6) slightly. The cover opens
automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
Cup holder in center console
Notes:
The right claw is adjustable to accommodate most
container sizes.
An additional second (smaller size) container can be
placed in the cup holder.
Spilling liquids (e.g. soda or coffee) could restrict the
movement of the claw. Refer to page 304 for cleaning
the cup holder.
Caution!
When not in use, keep the cup holder closed. Place only
containers that fit into the cup holder to prevent spills.
Use lids on open containers and do not fill containers to
a height where the contents, especially hot liquids,
could spill during vehicle maneuvers.
To open cup holder:
Briefly press button (7). The cup holder opens
automatically.
To store cup holder:
Push button (7) down until cup holder engages. Close
cover (6).
Interior equipment
149
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
150
Car care
Index
Interior equipment
Ashtray
Prior to removing the ashtray insert, move the gear
selector lever to position “N”.
Warning!
Remove front ashtray only with vehicle standing
still. With the gear selector lever in position “N”,
turn off the engine and set the parking brake.
Otherwise the vehicle might move as a result of
unintended contact with the gear selector lever.
To remove ashtray:
Push sliding knob (1) toward the right to eject the
insert.
To install ashtray:
Center console, front
Install insert into ashtray frame and push down to
engage.
By touching the bottom of the cover lightly, the ashtray
opens automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
Lighter
Turn electronic key in steering lock to position 1 or 2.
Push in lighter (1); it will pop out automatically when
hot.
Warning!
Never touch the heating element or sides of the
lighter, they are extremely hot, hold at knob only.
When leaving the vehicle, always remove the
electronic key from the steering lock. Do not leave
children unattended in the vehicle, or with access
to an unlocked vehicle. Unsupervised use of vehicle
equipment may cause an accident and/or serious
personal injury.
The lighter socket can be used to accommodate
electrical accessories up to maximum 85 W.
Interior equipment
Instruments
151
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
and controls
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
152
Car care
Index
Interior equipment
Cargo tie down rings
Parcel net in front passenger footwell
A small convenience parcel net is located in the front
passenger footwell. It is for small and light items, such
as road maps, mail, etc..
Warning!
Do not place heavy or fragile objects, or objects
having sharp edges, in the parcel net.
In an accident, during hard braking or sudden
maneuvers, they could be thrown around inside
the vehicle, and cause injury to vehicle occupants.
Note:
With large objects stored in the parcel net do not slide
the seat fully forward, it could damage them.
1 Ring
Carefully secure cargo by applying even load on the two
rings with rope of sufficient strength to hold the cargo.
Armrest, rear bench
Pull down the armrest by its top.
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone, general
Warning!
Note:
See separate instruction manual for instructions on how
to operate the telephone.
A driver’s attention to the road must always be his/
her primary focus when driving. For your safety
and the safety of others, we recommend that you
pull over to a safe location and stop before placing
or taking a telephone call. If you choose to use the
telephone while driving, please use the hands-free
device and only use the telephone when road,
weather and traffic conditions permit.
Cellular telephone
The vehicle is prepared for the installation of a cellular
telephone. For further information and installation
contact your authorized Mercedes-Benz Center.
Warning!
Some jurisdictions prohibit the driver from using a
cellular telephone while driving a vehicle.
Some jurisdictions prohibit the driver from using a
cellular telephone while driving a vehicle. Whether
or not prohibited by law, for safety reasons, the
driver should not use the cellular telephone while
the vehicle is in motion. Stop the vehicle in a safe
location before answering or placing a call.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is covering
a distance of approximately 50 feet (approximately
14 m) every second.
Never operate radio transmitters equipped with a
built-in or attached antenna (i.e. without being
connected to an external antenna) from inside the
vehicle while the engine is running. Doing so could
lead to a malfunction of the vehicle’s electronic
system, possibly resulting in an accident and
personal injury.
Telephone
153
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
154
Car care
Index
Garage door opener
Garage door opener
The built-in remote control is capable of operating up to
three separately controlled objects.
Warning!
When programming a garage door opener, the door
moves up or down.
When programming or operating the remote
control make sure there is no possibility of anyone
being harmed by the moving door.
2
1
Notes:
Certain types of garage door openers are incompatible
with the integrated opener. If you should experience
difficulties with programming the transmitter, contact
your authorized Mercedes-Benz Center, or call
Mercedes-Benz Customer Assistance Center (in the USA
only) at 1-800-FOR-MERCedes, or Customer Service (in
Canada) at 1-800-387-0100.
3
1 Signal transmitter keys
2 Indicator lamp
3 Hand-held remote control transmitter
Download from Www.Somanuals.com. All Manuals Search And Download.
For operation in the USA only: This device complies
with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
3. Using both hands, simultaneously push the hand-
held transmitter button and the desired integrated
remote control button. Do not release the buttons
until completing step 4.
(1) This device may not cause harmful interference, and
4. The indicator lamp on the integrated remote control
will flash, first slowly and then rapidly. When the
indicator lamp flashes rapidly, both buttons may be
released (the rapid flashing lamp indicates
successful programming of the new frequency
signal). To program the remaining two buttons,
follow steps 1 though 4.
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Any unauthorized modification to this device could void
to the user’s authority to operate the equipment.
Programming or reprogramming the integrated
remote control:
Note:
If after several attempts, you do not successfully
program the integrated remote control device to learn
the signal of the hand-held transmitter, the garage door
opener could be equipped with the “rolling code
feature”.
1. Turn electronic key in steering lock to position 1
or 2.
2. Hold the end of the hand-held transmitter of the
device you wish to train approximately 2 to 5 inches
(5 cm to 12 cm) away from the surface of the
integrated remote control located on the inside rear
view mirror, keeping the indicator lamp in view.
Garage door opener
155
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
156
Car care
Index
Garage door opener
Rolling code programming:
3. Firmly press and release the programmed
integrated remote control transmit button. Press
and release same button a second time to complete
the training process. (Some garage door openers
may requires you to do this procedure a third time
to complete the training.)
To train a garage door opener (or other rolling code
devices) with the rolling code feature, follow these
instructions after completing the “Programming”
portion of this text. (A second person may make the
following training procedures quicker and easier.)
4. Confirm the garage door operation by pressing the
programmed button on the integrated remote
control transmitter.
1. Locate training button on the garage door opener
motor head unit. Exact location and color of the
button may vary by garage door opener brand. If
there is difficulty locating the transmitting button,
reference to garage door opener operator’s manual.
Canadian programming:
During programming, your hand-held transmitter may
automatically stop transmitting. Continue to press and
hold the integrated remote control transmitter button
(note steps 2 through 4 in the “Programming” portion)
while you press and re-press (“cycle”) your hand-held
transmitter every two seconds until the frequency
signal has been learned. The indicator lamp will flash
slowly and then rapidly after several seconds upon
successful training.
2. Press “training” button on the garage door opener
motor head unit (which activates the “training
light”).
Note:
Following step 2, there are 30 seconds to initiate
step 3.
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation of remote control:
Erasing the remote control memory:
1. Turn electronic key in steering lock to position 1
or 2.
1. Turn electronic key in steering lock to position 1
or 2.
2. Select and press the appropriate button to activate
the remote controlled device. The integrated remote
control transmitter continues to send the signal as
long as the button is pressed – up to 20 seconds.
2. Simultaneously holding down the left and right side
buttons for approximately 20 seconds, or until the
control lamp blinks rapidly, will erase the codes of
all three channels.
Garage door opener
157
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
158
Car care
Index
Soft top
Soft top
• do not operate the luggage cover with the soft top
lowered. Doing so will result in damage to the
luggage cover or the soft top.
A minimum height clearance of 6 1/2 ft. (2 m) is
required to lower or raise the soft top.
Lowering a wet soft top can result in water reaching the
vehicle interior. The soft top should be dry when
lowering it into the soft top storage compartment.
The raising or lowering procedure can only be started
with the luggage cover (page 246) and trunk lid closed.
The raising or lowering procedure is immediately
interrupted by releasing the soft top switch.
Do not lower a frozen soft top until thawed and dry.
Doing so may result in damage not covered by the
Mercedes-Benz Limited Warranty.
Do not operate the soft top while a trunk luggage carrier
is installed.
To prevent mildew, the soft top must be dry before
lowering it into the storage compartment.
To prevent damage to the soft top, soft top compartment
cover, trunk lid or luggage/cargo when lowering the
roof:
The soft top should not be lowered or raised at outside
temperatures below +5°F (-15°C), since the material
becomes less pliable with lower temperatures.
• load trunk only to the height of the luggage cover,
• do not permit luggage/cargo to raise the closed
Notes:
luggage cover,
Rear passengers should lean forward while raising or
lowering the soft top, to clear the path of the rear
window.
• do not load anything on top of the luggage cover,
• do not place anything on the soft top compartment
cover,
To prevent the soft top from being lowered
unintentionally while a trunk luggage carrier is
installed, keep luggage cover in trunk in the open
position with the soft top raised.
• do not open the trunk lid while the soft top is being
raised or lowered. This is required since the soft top
compartment cover moves upward and backward
during raising or lowering operations,
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning!
Never lock or unlock the soft top while driving.
Doing so could cause the driver to lose control of
the vehicle.
2
1
Driving with an unlocked soft top may cause
personal injury to you or your passenger, or
personal injury or property damage to others.
1
Before operating the soft top switch make sure that
no persons due to inattention are injured by the
moving parts (roll bar, soft top frame and soft top
compartment cover).
P65.10-2081-26
Hands must never be placed near the roll bar, soft
top frame, upper windshield area or soft top storage
compartment while the soft top is being raised or
lowered. Serious personal injury may occur.
Important!
Do not manually move corner flaps (1) of soft top
compartment cover. Doing so will result in damage to
the soft top folding mechanism that is not covered by
the Mercedes-Benz Limited Warranty.
In case of danger release the switch to immediately
interrupt the operating procedure.
With the soft top lowered do not place anything on the
soft top compartment cover (2).
The soft top compartment cover must never be used by
any persons as a seat bench. Raising of the roll bar
could result in personal injury.
Soft top
159
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
160
Car care
Index
Soft top
2
1
P77.30-2080-26
P77.30-2070-26
Lowering Soft Top
Important!
Push soft top frame approx. 8 inches (20 cm) upward by
the locking handle. Failing to do so will result in
damage to the soft top folding mechanism that is not
covered by the Mercedes-Benz Limited Warranty.
1. Engage parking brake.
2. Close luggage cover and trunk lid.
For notes on the luggage cover, see page 246.
3. Turn electronic key in steering lock to position 2.
Turn locking handle counterclockwise to the stop and
fold up until it locks in place.
4. Press lock button (1) and fold down locking
handle (2).
• The indicator lamp in the soft top switch lights up.
5. Turn locking handle 90° clockwise to unlock the soft
• The side windows lower.
top.
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Lift symbol side of the soft top switch and hold:
• The roll bar lowers (when in the upper position).
• The soft top compartment cover and rear
window section of the soft top unlocks.
• The rear window section of the soft top raises.
• The soft top compartment cover opens.
• The soft top lowers into its storage compartment.
• The soft top compartment cover closes and
locks.
• The indicator lamp in the soft top switch goes
out – the lowering procedure is completed – a
signal sounds.
The switch is located on the center console.
Notes:
If the soft top switch is held or is released and lifted
again within approximately 2 seconds, the side
windows will close. If the roll bar was previously in the
upper position, it will return to that position.
If indicator lamp blinks slowly, a malfunction has
occurred in the system.
If indicator lamp blinks rapidly, the trunk lid and/or the
luggage cover may be open, and need to be closed.
The side windows can also be opened/closed later on.
Lift/press soft top switch twice and hold, see page 144.
However, the side windows and the roll bar can also be
activated using their respective switches, see page 142
and page 48.
Soft top
161
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
162
Car care
Index
Soft top
4. Press symbol side of soft top switch and hold:
Warning!
• The indicator lamp in the soft top switch lights
To prevent possible accidents, drive the vehicle
only with the soft top either completely closed and
locked, or fully lowered into its storage
compartment.
up.
Notes:
If indicator lamp blinks slowly, a malfunction
has occurred in the system.
Note:
If indicator lamp blinks rapidly, the trunk lid
and/or the luggage cover may be open, and need
to be closed.
For safety reasons, the soft top cannot be lowered while
driving.
• The side windows lower.
Raising Soft Top
• The roll bar lowers (when in the upper position).
1. Engage parking brake.
• The soft top compartment cover unlocks and
2. Close luggage cover and trunk lid.
For notes on the luggage cover, see page 246.
3. Turn electronic key in steering lock to position 2.
opens.
• The soft top is raised from its storage
compartment to the closing position.
• The soft top storage compartment closes and the
rear window section of the soft top lowers – a
signal sounds.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
1
P77.30-2070-26
5. Press lock button (1) and fold down locking
handle (2).
If the soft top switch is held or is released and pressed
again within approximately 2 seconds, the side
windows will close. If the roll bar was previously in the
upright position, it will return to that position.
6. Turn locking handle 90° clockwise and pull soft top
frame carefully down until it meets the windshield
header attachment points.
The side windows can also be closed/opened later on.
Press/lift soft top switch twice and hold, see page 144.
Turn locking handle counterclockwise to the stop to
lock the soft top.
However, the side windows and the roll bar can also be
activated using their respective switches, see page 142
and page 48.
Fold locking handle up until it locks in place.
The indicator lamp in the soft top switch goes out –
the lowering procedure is completed.
Soft top
163
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
164
Car care
Index
Soft top
Note:
Stop the vehicle and before continuing to drive,
close and lock the soft top.
For safety reasons, the soft top cannot be raised while
driving.
If the soft top is not locked, it may fold back or
forward when driving.
Warning!
During soft top operation, do not place your hands
near the roll bar, soft top frame, upper windshield
area or soft top storage compartment. Serious
personal injury may occur.
The soft top is not fully closed and locked:
• if the indicator lamp in the soft top switch does
not got out (electronic key in steering lock
position 2).
To prevent possible accidents, drive the vehicle
only with the soft top either completely closed and
locked, or fully lowered into its storage
compartment.
• if the indicator lamp blinks, and a signal
sounds for 10 seconds when starting to drive.
Download from Www.Somanuals.com. All Manuals Search And Download.
If the indicator lamp in the soft top switch blinks slowly
while activating the switch,
Have the system checked at your authorized
Mercedes-Benz Center as soon as possible.
• the battery voltage may be insufficient – start
Notes:
engine and let it run while activating switch,
If the roll bar was raised automatically, the process of
raising or lowering the soft top will take somewhat
longer, as the roll bar must first be lowered.
• the system may be overheated (for example after
lowering or raising the soft top approx. 5
consecutive times) – after approx. 10 minutes the
soft top switch may be activated again.
Whenever possible, park vehicle in the shade as
continuous exposure to sun rays can prematurely
deteriorate the soft top material.
If indicator lamp in the soft top switch blinks rapidly
while activating the switch,
The soft top may become moldy and receive permanent
creases if it is kept in the storage compartment for an
extended period.
• the trunk lid and/or the luggage cover may be open,
and need to be closed,
• the soft top is still locked during the opening
Therefore, we recommend raising and airing it
thoroughly with the side windows open (do not expose
it to the sun) at regular intervals during the wet and
cold seasons.
procedure and needs to be unlocked,
• the opening/closing procedure is interrupted.
In this case the soft top needs to be synchronized.
Turn electronic key in steering lock back to
position 0, and then to position 2. Activate soft top
switch again. The soft top should now be operational
again.
To prevent damage, the soft top must be dry and clean
before lowering it into the storage compartment. There
is the possibility of sharp-edged dirt particles damaging
the soft top or scratching the rear window.
If the indicator lamp continues to blink, raise the soft
top manually, see page 288.
Soft top
165
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
166
Car care
Index
Wind screen
Wind screen (optional)
Installation
1. Remove wind screen from its storage bag, located in
the trunk, secured with hook and loop fasteners,
and unfold.
2
2. Pull folded end sections in direction of arrow (1) and
unfold in direction of arrow (2).
1
P65.00-2016-26
The wind screen is most effective when all four side
windows are fully raised.
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Insert end section in right opening (3) on quarter
panel first. Then push left end section toward
vehicle center (arrow 4) until it meets the left
opening. Insert end section in left opening (5).
6
3
Push down on wind screen (6) until it locks in place.
4
Warning!
Check for secure locking by pulling up on the
wind screen.
5
P65.00-2039-26
Important!
The open end of the hooks must point toward the
vehicle’s front.
Wind screen
167
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
168
Car care
Index
Wind screen
Removal
Push left and right side buttons and remove wind
screen upward.
Warning!
To prevent personal injury, remove wind screen if
rear seats are to be occupied by passengers.
Note:
Do not insert foreign objects in openings for the
wind screen.
P65.00-2009-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing
Place wind screen in its storage bag, and close the bag.
Place bag in trunk, and secure it with the provided hook
and loop fasteners.
1
2
When the wind screen is not in use, it should be stored
in the closed storage bag, to prevent possible damage to
the wind screen or luggage/cargo.
P65.00-2011-26
Pull end sections in direction of arrow (1) and fold in
direction of arrow (2).
Wind screen
169
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
170
Car care
Index
Wind screen
Roller Blind (horizontal)
To open blind:
1. Pull out blind on tab (arrow 1) towards vehicles rear.
Insert guide rod of blind in right rear seat belt outlet
(arrow 2).
2
2. Insert other end of rod in left rear seat belt outlet as
shown with arrow (3).
1
Important!
3
Do not place anything on the roller blind.
To retract blind:
• Hold blind at tab, disengage and guide retraction.
P65.00-2049-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Roller Blind (vertical)
To open blind:
1. Fold driver and front passenger seat backrests
forward.
2. Pull out on tab, located below rear bench, towards
vehicle’s front, then pull up and engage blind at
wind screen.
To retract blind:
1. Fold driver and front passenger seat backrests
forward.
2. Hold blind at tab, disengage and guide its retraction.
P65.00-2018-26
Wind screen
171
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic transmission ................191 Cruise control ................................. 210
Parking brake ................................ 200 Brake assist system (BAS) ............ 212
Driving instructions ...................... 201 Antilock brake system (ABS) ....... 214
Drive sensibly – save fuel ........ 201 Electronic stability program
Driving
Control and operation of radio
transmitters ............................... 174
The first 1 000 miles
(1 500 km) .................................175
Maintenance ...................................175
Catalytic converter ........................ 176
Emission control ............................177
Tele Aid ...........................................178
Steering lock ...................................188
Starting and turning off the
(ESP) ........................................... 216
Drinking and driving ................ 201
Pedals .......................................... 201
Power assistance ........................ 202
Brakes ..........................................202
Driving off ...................................203
Parking ........................................204
Tires ............................................. 204
Snow chains ............................... 207
Winter driving instructions ..... 207
Standing water ...........................209
Passenger compartment ........... 209
Traveling abroad ........................ 209
What you should know at the gas
station .........................................220
Check regularly and before a long
trip ...............................................222
engine .........................................190
173
Instruments
and controls
Instrument
cluster display
Technical
Car care
Operation
Driving
Practical hints
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
174
Car care
Index
Control and operation of radio transmitters
Control and operation of radio transmitters
COMAND, radio and telephone
Telephones and two-way radio
Warning!
Warning!
Please do not forget that your primary
Never operate radio transmitters equipped with a
built-in or attached antenna (i.e. without being
connected to an external antenna) from inside the
vehicle while the engine is running. Doing so could
lead to a malfunction of the vehicle’s electronic
system, possibly resulting in an accident and
personal injury.
responsibility is to drive the vehicle. Only operate
the COMAND (Cockpit Management and Data
System), radio or telephone1 if road and traffic
conditions permit.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is covering
a distance of approximately 50 feet (approximately
14 m) every second.
Radio transmitters, such as a portable telephone or a
citizens band unit should only be used inside the
vehicle if they are connected to an antenna that is
installed on the outside of the vehicle.
1
Observe all legal requirements.
Refer to the radio transmitter operation instructions
regarding use of an external antenna.
Download from Www.Somanuals.com. All Manuals Search And Download.
The first 1 000 miles (1 500 km)
Maintenance
The more cautiously you treat your vehicle during the
break-in period, the more satisfied you will be with its
performance later on. Therefore, drive your vehicle
during the first 1 000 miles (1 500 km) at moderate
vehicle and engine speeds.
We strongly recommend that you have your vehicle
serviced by your authorized Mercedes-Benz Center, in
accordance with the Service Booklet at the times called
for by the FSS.
Failure to have the vehicle maintained in accordance
with the Service Booklet at the designated times/
mileage may result in vehicle damage not covered by
the Mercedes-Benz Limited Warranty.
During this period, avoid heavy loads (full throttle
driving) and excessive engine speeds.
Avoid accelerating by kickdown. It is not recommended
to brake the vehicle by manually shifting to a lower gear.
We recommend that you select positions “3”, “2” or “1”
only at moderate speeds (for hill driving).
For information on the Flexible service system (FSS),
see page 105.
After 1 000 miles (1 500 km) speeds may be gradually
increased to the permissible maximum.
The first 1 000 miles
175
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
176
Car care
Index
Catalytic converter
Catalytic converter
Caution!
Your Mercedes-Benz is equipped with monolithic type
catalytic converters, an important element in
To prevent damage to the catalytic converters, use only
premium unleaded gasoline in this vehicle.
conjunction with the oxygen sensors to achieve
substantial control of the pollutants in the exhaust
emissions. Keep your vehicle in proper operating
condition by following our recommended maintenance
instructions as outlined in your Service Booklet.
Any noticeable irregularities in engine operation should
be repaired promptly. Otherwise, excessive unburned
fuel may reach the catalytic converter causing it to
overheat, which could start a fire.
Warning!
As with any vehicle, do not idle, park or operate
this vehicle in areas where combustible materials
such as grass, hay or leaves can come into contact
with the hot exhaust system, as these materials
could be ignited and cause a vehicle fire.
Download from Www.Somanuals.com. All Manuals Search And Download.
Emission control
Warning!
Certain systems of the engine serve to keep the toxic
components of the exhaust gases within permissible
limits required by law.
Inhalation of exhaust gas is hazardous to your
health. All exhaust gas contains carbon monoxide,
and inhaling it can cause unconsciousness and
lead to death.
These systems, of course, will function properly only
when maintained strictly according to factory
Do not run the engine in confined areas (such as a
garage) which are not properly ventilated. If you
think that exhaust gas fumes are entering the
vehicle while driving, have the cause determined
and corrected immediately. If you must drive under
these conditions, drive only with at least one
window fully open.
specifications. Any adjustments on the engine should,
therefore, be carried out only by qualified Mercedes-
Benz authorized center technicians. Engine adjustments
should not be altered in any way. Moreover, the
specified service jobs must be carried out regularly
according to Mercedes-Benz servicing requirements.
For details refer to the Service Booklet.
Emission control
177
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
178
Car care
Index
Tele Aid
Tele Aid (optional for Canada)
The speaker volume of a Tele Aid call can be adjusted
when using the volume control on the multifunction
steering wheel, for raising press button æ and for
lowering press button ç.
Important!
The initial activation of the Tele Aid system may only be
performed by completing the subscriber agreement and
placing an acquaintance call using the SOS button.
Failure to complete either of these steps will result in a
system that is not activated. If the system is not
activated the indicator lamp in the SOS button stays on
after turning electronic key in starter switch to
position 2 and the message “TELE AID – NOT
ACTIVATED” will be shown in the multifunction display
for approx. 10 seconds.
To activate, press the SOS button, the Roadside
Assistance button • or the Information button ¡,
depending on the type of response required.
Shortly after the completion of your Acquaintance Call,
you will receive a user ID and password via first call
mail. By visiting www.mbusa.com and selecting “Tele
Aid” (USA only), you will have access to account
information, remote door unlock, profile and more.
Important!
If you have any questions regarding activation, please
call the Response Center at 1-800-756-9018 (in the USA)
or 1-888-923-8367 (in Canada).
Tele Aid utilizes the cellular network for
communication and the GPS (Global Positioning
System) satellites for vehicle location. If either of these
signals are unavailable, the Tele Aid system may not
function and if this occurs, assistance must be
summoned by other means.
(Telematic Alarm Identification on Demand)
The Tele Aid system consists of three types of response;
automatic and manual emergency, roadside assistance
and information.
The Tele Aid system is operational providing that the
vehicle’s battery is charged, properly connected, not
damaged and cellular and GPS coverage is available.
Download from Www.Somanuals.com. All Manuals Search And Download.
System self-check
Important!
Initially, after turning the electronic key in starter
switch to position 2, malfunctions are detected and
indicated (the indicator lamps in the SOS button, the
Roadside Assistance button • and the Information
button ¡ stay on longer than 10 seconds or do not
come on). The message “TELE AID – VISIT
Always make sure that the indicator lamps in the is not
displayed in the multifunction display after the system
self check.
If a malfunction is indicated as outlined above, have the
system checked at the nearest Mercedes-Benz Center as
soon as possible.
WORKSHOP” appears for approx. 10 seconds in the
multifunction display.
Emergency calls
Warning!
An emergency call is initiated automatically:
If the indicator lamps in the SOS button, in the
“Roadside Assistance” button and/or in the
“Information” button do not come on during the
system self-check or if any of these indicators
remain illuminated constantly in red and/or the
message “TELE AID - VISIT WORKSHOP” is
displayed in the multifunction display after the
system self-check, a malfunction in the system has
been detected.
• following an accident in which the Emergency
Tensioning Devices (ETDs) or airbags deploy,
• if the antitheft alarm or the tow away alarm stays on
for more than 20 seconds, see pages 39 and 40.
An emergency call can also be initiated manually by
opening the cover next to the inside rear view mirror
labeled SOS, then briefly pressing the button located
under the cover. See below for instructions on initiating
an emergency call manually.
If a malfunction is indicated as outlined above, the
system may not operate as expected. Have the
system checked at the nearest Mercedes-Benz
Center as soon as possible.
Once the emergency call is in progress, the indicator
lamp in the SOS button will begin to flash. The message
“EMERGENCY CALL – CONNECTING CALL” appears in
the multifunction display. When the connection is
Tele Aid
179
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
180
Car care
Index
Tele Aid
established, the message “EMERGENCY CALL – CALL
CONNECTED” appears in the multifunction display. All
information relevant to the emergency, such as the
location of the vehicle (determined by the GPS satellite
location system), vehicle model, identification number
and color are generated.
Note:
Location of the vehicle on a map is possible if the
vehicle is able to receive signals from the GPS satellite
network and pass the information on to the response
center.
Warning!
A voice connection between the Response Center and
the occupants of the vehicle will be established
automatically soon after the emergency call has been
initiated. When a voice connection is established the
audio system mutes and the message “TELE AID –
EMERGENCY CALL ACTIVE” appears in the
multifunction display. The Response Center will attempt
to determine more precisely the nature of the accident
provided they can speak to an occupant of the vehicle.
If the indicator lamp in the SOS button is
illuminated continuously and there was no voice
connection to the Response Center established,
then the Tele Aid system could not initiate an
emergency call (e.g. the relevant cellular phone
network is not available). The message
“EMERGENCY CALL – CALL FAILED” appears in
the multifunction display for approx. 10 seconds.
Should this occur, assistance must be summoned
by other means.
The Tele Aid system is available if:
• it has been activated and is operational. Activation
requires a subscription for monitoring services and
cellular air time,
• the relevant cellular phone network and GPS signals
are available and pass the information on to the
response center.
Download from Www.Somanuals.com. All Manuals Search And Download.
Initiating an emergency call manually
Warning!
If you feel at any way in jeopardy when in the
vehicle (e.g. smoke or fire in the vehicle, vehicle in
a dangerous road location), please do not wait for
voice contact after you have pressed the emergency
button. Carefully leave the vehicle and move to a
safe location. The Response Center will
2
automatically contact local emergency officials
with the vehicle’s approximate location if they
receive an automatic SOS signal and cannot make
voice contact with the vehicle occupants.
1
P82.95-2114-26
Briefly press on cover (1) – the cover will open.
Press the SOS button (2) briefly. The indicator lamp in
the SOS button (2) will flash until the emergency call is
concluded. Wait for a voice connection to the Response
Center.
Close the cover (1) after the emergency call is
concluded.
Tele Aid
181
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
182
Car care
Index
Tele Aid
Roadside Assistance button •
services such as labor and/or towing charges may apply.
Refer to the Roadside Assistance manual for more
information.
Located below the center armrest cover is the Roadside
Assistance button •. Pressing and holding the
button (for longer than 2 seconds) will initiate a call to a
Mercedes-Benz Roadside Assistance dispatcher. The
button will flash while the call is in progress. The
message “ROADSIDE ASSISTANCE – CONNECTING
CALL” will appear in the multifunction display. When
the connection is established, the message “ROADSIDE
ASSISTANCE – CALL CONNECTED” appears in the
multifunction display. The Tele Aid system will transmit
data generating the vehicle identification number,
model, color and location (subject to availability of
cellular and GPS signals).
These programs are only available in the USA:
• Sign and Drive services: Services such as jump start,
a few gallons of fuel or the replacement of a flat tire
with the vehicle spare tire are obtainable,
• Remote Vehicle Diagnostics: This function permits
the Mercedes-Benz Roadside Assistance dispatcher
to download malfunction codes and actual vehicle
data.
Notes:
A voice connection between the Roadside Assistance
dispatcher and the occupants of the vehicle will be
established. When a voice connection is established the
audio system mutes and the message “TELE AID –
ROADSIDE ASSISTANCE CALL ACTIVE” appears in the
multifunction display. The nature of the need for
assistance can then be described. The Mercedes-Benz
Roadside assistance dispatcher will either dispatch a
qualified Mercedes-Benz technician or arrange to tow
your vehicle to the nearest Mercedes-Benz Center. For
The indicator lamp in the Roadside Assistance
button • remains illuminated in red for approx.
10 seconds during the system self-check after turning
electronic key in starter switch to position 2 (together
with the SOS button and the Information button ¡).
See system self-check on page 179 when the indicator
lamp does not light up in red or stays on longer than
approximately 10 seconds.
Download from Www.Somanuals.com. All Manuals Search And Download.
If the indicator lamp in the Roadside Assistance
button • is illuminated continuously and there was
no voice connection to the Response Center established,
then the Tele Aid system could not initiate an Roadside
Assistance call (e.g. the relevant cellular phone network
is not available). The message “ROADSIDE
A voice connection between the Customer Assistance
Center representative and the occupants of the vehicle
will be established. When a voice connection is
established the audio system mutes and the message
“TELE AID – INFO CALL ACTIVE” appears in the
multifunction display. Information regarding the
operation of your vehicle, the nearest Mercedes-Benz
Center or Mercedes-Benz USA products and services is
available to you.
ASSISTANCE – CALL FAILED” appears in the
multifunction display.
Roadside Assistance calls can be terminated using the
ì button on the multifunction steering wheel.
For more details concerning Tele Aid, please visit
www.mbusa.com and use your ID and password, sent to
you separately, to learn more (USA only).
Information button ¡
Notes:
Located below the center armrest cover is the
Information button ¡. Pressing and holding the
button (for longer than 2 seconds) will initiate a call to
the Customer Assistance Center. The button will flash
while the call is in progress. The message “INFO –
CONNECTING CALL” will appear in the multifunction
display. When the connection is established, the
message “INFO – CALL CONNECTED” appears in the
multifunction display. The Tele Aid system will transmit
data generating the vehicle identification number,
model, color and location (subject to availability of
cellular and GPS signals).
The indicator lamp in the Information button ¡
remains illuminated in red for approx. 10 seconds
during the system self-check after turning electronic
key in starter switch to position 2 (together with the
SOS button and the Roadside Assistance button •).
See system self-check on page 179 when the indicator
lamp does not light up in red or stays on longer than
approximately 10 seconds.
If the indicator lamp in the Information button ¡ is
illuminated continuously and there was no voice
connection to the Response Center established, then the
Tele Aid
183
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
184
Car care
Index
Tele Aid
Tele Aid system could not initiate an Information call
(e.g. the relevant cellular phone network is not
available). The message “INFO – CALL FAILED” appears
in the multifunction display.
Upgrade Signals
Tele Aid system processes calls using the following
priority.
• Automatic emergency – First priority
• Manual emergency – Second priority
• Roadside Assistance – Third priority
• Information – Fourth priority
Information calls can be terminated using the
ì button on the multifunction steering wheel.
Important!
If the indicator lamps do not start flashing after
pressing one of the buttons or remain illuminated (in
red) at any time, the Tele Aid system has detected a fault
or the service is not currently active, and may not
initiate a call. Visit your Mercedes-Benz Center and
have the system checked or contact the Response Center
at 1-800-756-9018 (in the USA) or 1-888-923-8367 (in
Canada) as soon as possible.
Should a higher priority call be initiated while you are
connected, an upgrade (alternating) tone will be heard,
and the appropriate indicator lamp will flash. If certain
information such as vehicle identification number or
customer information is not available, the operator may
need to retransmit. During this time you will hear a
beep and voice contact will be interrupted. Voice contact
will resume once the retransmission is completed. Once
a call is concluded, a beep will be heard and the
appropriate indicator lamp will stop flashing. The
COMAND system operation will resume (only vehicles
with COMAND).
Download from Www.Somanuals.com. All Manuals Search And Download.
Important!
When a Tele Aid call has been initiated, the audio
system or the COMAND system audio (only vehicles
with COMAND) is muted and the selected mode (radio,
tape or CD) pauses. The optional cellular phone (if
installed) switches off. If you must use this phone, the
vehicle must be parked. Disconnect the coiled cord and
place the call. The COMAND navigation system (if
engaged) will continue to run. The display in the
instrument cluster is available for use and spoken
commands are only available by pressing the RPT
button on the COMAND unit. A pop-up window will
appear in the COMAND display to indicate that a Tele
Aid call is in progress.
If the indicator lamp continues to flash or the system
does not reset, contact the Response Center at
1-800-756-9018 (in the USA) or 1-888-923-8367 (in
Canada), or Mercedes-Benz Customer Assistance at
1-800-FOR-MERCedes (1-800-367-6372) in the USA or
Customer Service at 1-800-387-0100 in Canada.
Notes:
The indicator lamp in the respective button flashes until
the call is concluded. Calls can only be terminated by a
Response Center or Customer Assistance Center
representative except Roadside Assistance and
Information calls, which can also be terminated by
pressing ì button on the multifunction steering
wheel.
Tele Aid
185
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
186
Car care
Index
Tele Aid
Remote door unlock
Notes:
The remote door unlock feature is available if the
relevant cellular phone network is available.
In the case you have your vehicle locked unintentionally
(e.g. key inside vehicle), and the reserve key is not
handy, contact the Mercedes-Benz Response Center at
1-800-756-9018 (in the USA) or 1-888-923-8367 (in
Canada). You will be asked to provide your password
which you provided when you completed the subscriber
agreement.
The SOS button will flash and the message
“EMERGENCY CALL – CALL CONNECTED” will appear
in the multifunction display to indicate receipt of the
door unlock command.
Once the vehicle is unlocked, a Response Center
specialist will attempt to establish voice contact with the
vehicle occupants.
Then return to your vehicle and press trunk lock for
minimum of 20 seconds until the SOS button is
flashing. The message “EMERGENCY CALL – CALL
CONNECTED” appears in the multifunction display.
If the trunk lock was pressed for more than 20 seconds
before door unlock authorization was received by the
Response Center, you must wait 15 minutes before
pressing trunk lock again.
As an alternative, you may unlock the vehicle via
Internet using the ID and password sent to you shortly
after the completion of your Acquaintance Call.
The Response Center will then unlock your vehicle with
the remote door unlocking feature.
Download from Www.Somanuals.com. All Manuals Search And Download.
Stolen vehicle tracking services
In the event your vehicle was stolen, report the incident
to the police who will issue a numbered incident report.
Pass this number on to the Mercedes-Benz Response
Center.
The Response Center will then attempt to covertly
contact the vehicle’s Tele Aid system. Once the vehicle
is located, the Response Center will contact the local
Law Enforcement and you. The vehicle’s location will
only be provided to Law Enforcement.
Tele Aid
187
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
188
Car care
Index
Steering lock
Steering lock
1 Steering is unlocked.
(If necessary, move steering wheel slightly to allow
the electronic key to be turned clockwise to
position 1.) Most electrical consumers can be
operated. For detailed information see respective
subjects.
2 Driving position.
Gear selector lever is unlocked.
To move the selector lever out of position “P”, firmly
depress the service brake pedal.
3 Starting position.
See page 190 for starting and turning off the engine.
P82.00-2073-26
0 The electronic key can be withdrawn in this position
only. The steering is locked when the electronic key
is removed from the steering lock. If necessary,
move steering wheel slightly to allow the locking
mechanism to engage. The electronic key can only
be removed with the selector lever in position “P”.
After removing the electronic key or with the
electronic key in steering lock position 0, the
selector lever is locked in position “P”.
Warning!
When leaving the vehicle, always remove the
electronic key from the steering lock, and lock the
vehicle. Do not leave children unattended in the
vehicle, or with access to an unlocked vehicle.
Unsupervised use of vehicle equipment may cause
an accident and/or serious personal injury.
Download from Www.Somanuals.com. All Manuals Search And Download.
Important!
Notes:
A warning sounds when the driver’s door is opened
while the electronic key is in steering lock position 1
or 0.
If the electronic key is left in the steering lock position 0
for an extended period of time, it can no longer be
turned in the lock. In this case, remove electronic key
from steering lock and reinsert.
If the electronic key cannot be turned in the steering
lock, the vehicle battery may not be sufficiently charged.
See battery on page 270 or jump starting on page 271.
Caution!
To prevent accelerated battery discharge and a possible
dead battery, always remove the electronic key from the
steering lock. Do not leave the electronic key in steering
lock position 0.
With the engine at idle speed, the charging rate of the
alternator (output) is limited.
It is therefore recommended that you turn off
unnecessary electrical consumers while driving in stop-
and-go traffic. This precaution helps to avoid draining of
the battery.
Unnecessary strain on the battery and charging system
may be minimized by turning off the following power
consumers, for example: Heated seats, rear window
defroster. In addition, the automatic climate air volume
control should be set to the lowest position.
The steering lock can only be unlocked with the vehicle
battery properly charged and connected.
Steering lock
189
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
190
Car care
Index
Starting and turning off the engine
Starting and turning off the engine
Important!
Due to the installed starter non-repeat feature, the
electronic key must be turned completely to the left
before attempting to start the engine again.
Before starting
Ensure that parking brake is engaged and that selector
lever is in position “P” or “N”. Turn electronic key in
steering lock to position 2.
In areas where temperatures frequently drop below -4°F
(-20°C) we recommend that an engine block heater be
installed. Your authorized Mercedes-Benz Center will
advise you on this subject.
Starting
Note:
Do not depress accelerator.
Too many unsuccessful starting attempts may discharge
the battery.
Briefly turn electronic key in steering lock clockwise to
the stop and release. The starter will engage until the
engine is running.
If engine will not run, and the starting procedure stops,
turn electronic key completely to the left and repeat
starting the engine.
Turning off
Turn the electronic key in the steering lock to position 0
to stop the engine.
After several unsuccessful attempts, have the system
checked at the nearest authorized Mercedes-Benz
Center.
The electronic key can only be removed with the
selector lever in position “P”.
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic transmission
The automatic transmission selects individual gears
automatically, dependent upon
• Selector lever position
• Program mode selector
• Accelerator position
• Vehicle speed
The gear shifting process is continuously adapted,
dependent on the driving style, the driving situation
and the road characteristics.
Important!
When parking the vehicle or before working on the
vehicle with the engine running, firmly depress the
parking brake pedal and shift the selector lever into “P”.
Automatic transmission
191
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
192
Car care
Index
Automatic transmission
Driving
Important!
The selector lever is automatically locked while in
position “P”. To move the selector lever out of
position “P”, the service brake pedal must be firmly
depressed before the shift lock will release.
After selecting any driving position from “N” or “P”,
wait a moment to allow the gear to fully engage before
accelerating, especially when the engine is cold.
Shift selector lever to the desired position only when the
engine is idling normally and the service brake is
applied. Do not release the brake until ready to drive.
The vehicle may otherwise start creeping when the
selector lever is in drive or reverse position.
Accelerator position
Partial throttle = early upshifting = normal acceleration
Full throttle = later upshifting = rapid acceleration
Kickdown (depressing the accelerator beyond full
throttle) = downshifting to a lower gear = maximum
acceleration. Once the desired speed is attained, ease up
on the accelerator – the transmission shifts up again.
Warning!
It is dangerous to shift the selector lever out of “P”
or “N” if the engine speed is higher than idle speed.
If your foot is not firmly on the brake pedal, the
vehicle could accelerate quickly forward or in
reverse. You could lose control of the vehicle and
hit someone or something. Only shift into gear
when the engine is idling normally and when your
right foot is firmly on the brake pedal.
Download from Www.Somanuals.com. All Manuals Search And Download.
Stopping
Rocking a vehicle free in this manner may cause the
ABS or traction system malfunction indicator lamp to
come on. Turn off and restart the engine to clear the
malfunction indication.
For brief stops, e.g. at traffic lights, leave the
transmission in gear and hold vehicle with the service
brake.
For longer stops with the engine idling, shift into “N”
or “P” and hold the vehicle with the service brake.
Warning!
Getting out of your vehicle with the selector lever
not fully engaged in position “P” is dangerous.
Also, when parked on an incline, position “P” alone
may not prevent your vehicle from moving,
possibly hitting people or objects.
When stopping the vehicle on an uphill gradient, do not
hold it with the accelerator, use the brake. This avoids
unnecessary transmission heat build up.
Always set the parking brake in addition to shifting
to position “P”, see page 200 for parking brake.
Maneuvering
To maneuver in tight areas, e.g. when pulling into a
parking space, control the vehicle speed by gradually
releasing the brakes. Accelerate gently and never
abruptly step on the accelerator.
When parked on an incline, also turn front wheel
against curb.
Warning!
To rock a vehicle out of soft ground (mud or snow),
alternately shift from forward to reverse, while applying
slight partial throttle.
When leaving the vehicle, always remove the
electronic key from the steering lock, and lock the
vehicle. Do not leave children unattended in the
vehicle, or with access to an unlocked vehicle.
Children could move the gear selector lever from
position “P”, which could result in an accident
and/or serious personal injury.
Automatic transmission
193
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
194
Car care
Index
Automatic transmission
Selector lever position
Park position
The park position is to be used when parking the
vehicle. Engage only with the vehicle stopped.
The park position is not intended to serve as a
brake when the vehicle is parked. Rather, the
driver should always use the parking brake in
addition to placing the selector lever in park to
secure the vehicle.
Note:
The electronic key can only be removed from the
steering lock with the selector lever in
position “P”. With the electronic key removed, the
selector lever is locked in position “P”.
With a malfunction in the vehicle’s electrical
system the selector lever could remain locked in
position “P”. To unlock the selector lever
manually, see page 276.
The current selector lever position is indicated in the
gear range indicator display. The automatic gear
shifting process can be adapted to specific operating
conditions using the selector lever.
Reverse gear
Shift to reverse gear only with the vehicle
stopped.
Download from Www.Somanuals.com. All Manuals Search And Download.
Dependent on the program mode selector switch
position “S” or “W” the maximum speed in the
reverse gear is different. However, it is not
possible to change the program mode while in
reverse.
Gear selection for special circumstances
The transmission gear ranges for special circumstances
can be selected by pressing the selector lever to the
right or the left with the selector lever in position “D”.
The gear range currently selected is indicated in the
instrument cluster display.
Neutral
No power is transmitted from the engine to the
drive axle. When the brakes are released, the
vehicle can be moved freely (pushed or towed). Do
not engage “N” while driving except to coast
when the vehicle is in danger of skidding (e.g. on
icy roads, see winter driving instructions on
page 207).
Briefly press selector lever in the ç direction:
The transmission downshifts, one gear at a time, in the
order “4”, “3”, “2”, “1”.
Press and hold selector lever in the ç direction:
The selector lever position display will switch to the
gear range currently selected by the automatic
transmission.
The transmission will only shift down one gear if the
gear range currently selected has already shifted to its
highest possible gear.
Important!
Coasting the vehicle, or driving for any other
reason with selector lever in “N” can result in
transmission damage that is not covered by the
Mercedes-Benz Limited Warranty.
Briefly press selector lever in the æ direction:
The transmission will shift from the current gear range
to the next higher gear range as permitted by the shift
program.
The transmission automatically upshifts through
5th gear. Position “D” provides optimum driving
characteristics under all normal operating
conditions.
Automatic transmission
195
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
196
Car care
Index
Automatic transmission
Press and hold selector lever in the æ direction:
The transmission will shift from the current gear
directly to gear range “D”.
During the brief warm-up period this delayed upshift
and increased engine noise might be perceived as a
malfunction. However, neither the engine nor
transmission are negatively affected by this mode of
operation.
Warning!
The delayed upshift is effective with vehicle speeds
below 31 mph (50 km/h) at partial throttle and engine
temperatures below 95°F (35°C).
On slippery road surfaces, never downshift in order
to obtain braking action. This could result in drive
wheel slip and reduced vehicle control. Your
vehicle’s ABS will not prevent this type of loss of
control.
To avoid overrevving the engine when the selector lever
is moved to a lower gear range, the transmission will not
shift to a lower gear, if the engine's max. speed would be
exceeded. In this case there will be no downshift, even
when the vehicle speed reaches the engine’s RPM limit
of that gear, e.g. by applying the service brakes.
Important!
With transmission in gear range “D”, “4” or “3”,
upshifting from 1st to 2nd to 3rd gear is delayed
depending on vehicle speed and engine temperature.
This allows the catalytic converter to heat up more
quickly to operating temperatures.
To prevent the engine from laboring at low RPM when
driving uphill gradients or with your vehicle heavily
loaded, the automatic transmission will downshift when
necessary to maintain engine RPM within the best
torque range.
Download from Www.Somanuals.com. All Manuals Search And Download.
Gear ranges:
Upshift through 4th gear only. Suitable for
Upshift through 2nd gear only. For driving in
mountainous regions or under extreme operating
conditions. This gear selection will allow use of
the engine’s braking power when descending
steep grades.
performance driving.
Upshift through 3rd gear only. Suitable for
moderately steep hills. Since the transmission
does not shift higher than 3rd gear, this gear
selection will allow use of the engine’s braking
power downhill.
Use this position, which makes maximum use of
the engine’s braking effect, while descending
very steep or lengthy downgrades and only at
speeds below 40 mph (60 km/h).
Automatic transmission
197
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
198
Car care
Index
Automatic transmission
Program mode selector switch
Accelerator Operation:
Fast on = depressing the accelerator pedal quickly
(not into kickdown position) while driving
continuously, rather than depressing the
accelerator pedal in the usual manner, will cause
the automatic transmission to shift down into a
lower gear. This gear shifting process is
dependent on the current vehicle speed.
Fast off = there will be no upshift when releasing
the accelerator pedal quickly, e.g. using the
engine’s braking power during performance
driving.
1
W
Winter/Wet (snow and ice) mode
Press switch on symbol “W”. The vehicle starts
out in 2nd gear, except with selector lever in 1st
gear, or with accelerator pedal in kick-down
position.
The transmission is provided with a selector switch (1)
for Standard “S” and Winter/Wet (snow and ice) “W”
program modes.
The “W” mode helps to improve traction and
driving stability of the vehicle.
S
Standard mode
Press switch on symbol “S”. Use this mode for all
regular driving.
The gear shifting process occurs at lower vehicle
and engine speeds than in the “S” program mode.
The vehicle starts out in 1st gear.
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution!
In this mode only the 2nd gear or reverse gear can be
activated.
Never change the program mode when the selector lever
is out of position “P”. It could result in a change of
driving characteristics for which you may not be
prepared.
To engage 2nd gear or reverse:
1. Stop the vehicle.
2. Move selector lever to position “P”.
3. Turn off the engine.
Important!
Always be certain of the program mode selected since
the vehicle driving characteristics change with the
selection of the program mode.
4. Wait approx. 10 seconds.
5. Restart the engine.
Dependent on the program mode selector switch
position “S” or “W” and the gear selector lever in
position “R”, the ratio of power transmission changes.
6. Move selector lever to position “D” (for 2nd gear), or
move selector lever to position “R” (for reverse gear).
Have the transmission checked at your authorized
Mercedes-Benz Center as soon as possible.
Emergency operation (Limp home mode)
If vehicle acceleration worsens or the transmission no
longer shifts, the transmission is most likely operating
in Limp home mode which engages when there is a
malfunction of the transmission. This condition may be
accompanied by the “CHECK ENGINE” malfunction
indicator lamp in the instrument cluster coming on.
Automatic transmission
199
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
200
Car care
Index
Parking brake
Parking brake
To engage, firmly depress parking brake pedal. When
the electronic key is in steering lock position 2, the
brake warning lamp in the instrument cluster should
come on brightly.
To release the parking brake, pull handle on instrument
panel. The brake warning lamp in the instrument
cluster should go out.
A warning sounds, if you start to drive without having
released the parking brake.
Also see brake warning lamp on page 225.
Warning!
When leaving the vehicle, always remove the
electronic key from the steering lock, and lock the
vehicle. Do not leave children unattended in the
vehicle, or with access to an unlocked vehicle.
Children could release the parking brake, which
could result in an accident and/or serious injury.
Download from Www.Somanuals.com. All Manuals Search And Download.
Driving instructions
Drinking and driving
Warning!
Drive sensibly – save fuel
Drinking and driving and/or taking drugs and
driving can be a very dangerous combination. Even
a small amount of alcohol or drugs can affect your
reflexes, perceptions and judgement.
Fuel consumption, to a great extent, depends on driving
habits and operating conditions.
To save fuel you should:
The possibility of a serious or even fatal accident is
sharply increased when you drink or take drugs
and drive.
• keep tires at the recommended inflation pressures,
• remove unnecessary loads,
• allow engine to warm up under low load use,
• avoid frequent acceleration and deceleration,
Please don’t drink or take drugs and drive or allow
anyone to drive after drinking or taking drugs.
• have all maintenance work performed at regular
Pedals
intervals by an authorized Mercedes-Benz Center.
Fuel consumption is also increased by driving in cold
weather, in stop-and-go traffic, on short trips and in hilly
country.
Warning!
Keep driver’s foot area clear at all times. Objects
stored in this area may impair pedal movement.
Driving instructions
201
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
202
Car care
Index
Driving instructions
Power assistance
Excessive use of salt and other snow melting chemicals
spread on roads during the winter months may cause a
build up of moisture or residue to form on the braking
components. This build up or residue could cause light
corrosion of the braking components if the vehicle is
parked with the brakes cold. Apply steady and even
braking pressure when stopping the vehicle to warm up
and dry the brake components.
Warning!
When the engine is not running, the brake and
steering systems are without power assistance.
Under these circumstances, a much greater effort is
necessary to stop or steer the vehicle.
Important!
Brakes
Please pay attention to the function of the brake assist
system (BAS), see page 212.
Warning!
After driving in heavy rain for some time without
applying the brakes or through water deep enough
to wet brake components or salty road conditions,
the first braking action may be somewhat reduced
and increased pedal pressure may be necessary to
obtain expected braking effect. Be sure to maintain
a safe distance from vehicles in front.
If the parking brake is released and the brake warning
lamp in the instrument cluster stays on, the brake fluid
level in the reservoir is too low.
Brake pad wear or a leak in the system may be the
reason for low brake fluid in the reservoir.
Have the brake system inspected at an authorized
Mercedes-Benz Center immediately.
Resting your foot on the brake pedal will cause
excessive and premature wear of the brake pads.
It can also result in the brakes overheating thereby
significantly reducing their effectiveness. It may
not be possible to stop the vehicle in sufficient time
to avoid an accident.
Download from Www.Somanuals.com. All Manuals Search And Download.
All checks and service work on the brake system should
be carried out by an authorized Mercedes-Benz Center.
Driving off
Apply the service brakes to test them briefly after
driving off. Perform this procedure only when the road
is clear of other traffic.
Install only brake pads and brake fluid recommended by
Mercedes-Benz.
Warm up the engine smoothly. Do not place full load on
the engine until the operating temperature has been
reached.
Warning!
If other than recommended brake pads are
installed, or other than recommended brake fluid
is used, the braking properties of the vehicle can be
degraded to an extent that safe braking is
substantially impaired. This could result in an
accident.
When starting off on a slippery surface, do not allow one
drive wheel to spin for an extended period with the ESP
switched off. Doing so may cause serious damage to the
drive train which is not covered by the Mercedes-Benz
Limited Warranty.
Caution!
When driving down long and steep grades, relieve the
load on the brakes by shifting into a lower gear to use
the engine’s braking power. This helps prevent
overheating of the brakes and reduces brake pad wear.
After hard braking, it is advisable to drive on for some
time, rather than immediately parking, so the air stream
will cool down the brakes faster.
Driving instructions
203
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
204
Car care
Index
Driving instructions
Parking
Tires
Warning!
Warning!
To reduce the risk of personal injury as a result of
vehicle movement, before turning off the engine
and leaving the vehicle, always:
If you feel a sudden significant vibration or ride
disturbance, or you suspect that possible damage to
your vehicle has occurred, you should turn on the
hazard warning flashers, carefully slow down, and
drive with caution to an area which is a safe
distance from the roadway.
1. Keep right foot on the service brake pedal.
2. Firmly depress parking brake pedal.
3. Move the selector lever to position “P”.
4. Slowly release the service brake pedal.
5. Turn front wheels towards the road curb.
Inspect the tires and under the vehicle for possible
damage. If the vehicle or tires appear unsafe, have
it towed to the nearest Mercedes-Benz Center or
tire dealer for repairs.
6. Turn the electronic key to steering lock
position 0 and remove.
Tread wear indicators (TWI) are required by law. These
indicators are located in six places on the tread
circumference and become visible at a tread depth of
approximately 1/16 in (1.5 mm), at which point the tire is
considered worn and should be replaced.
7. Take the electronic key and lock vehicle when
leaving.
The tread wear indicator appears as a solid band across
the tread.
Important!
It is advisable to set the parking brake whenever
parking or leaving the vehicle. In addition, move
selector lever to position “P”.
When parking on hills, always set the parking brake.
Download from Www.Somanuals.com. All Manuals Search And Download.
Specified tire pressures must be maintained. This
applies particularly if the tires are subjected to high
loads (e.g. high speeds, heavy loads, high ambient
temperatures).
Warning!
Do not drive with a flat tire. A flat tire affects the
ability to steer or brake the vehicle. You may lose
control of the vehicle. Continued driving with a flat
tire or driving at high speed with a flat tire will
cause excessive heat build-up and possibly a fire.
Aquaplaning
Depending on the depth of the water layer on the road,
aquaplaning may occur, even at low speeds and with
new tires. Reduce vehicle speed, avoid track grooves in
the road and apply brakes cautiously in the rain.
Warning!
Do not allow your tires to wear down too far. As
tread depth approaches 1/16 in (1.5 mm), the
adhesion properties on a wet road are sharply
reduced.
Depending upon the weather and/or road surface
(conditions), the tire traction varies widely.
Driving instructions
205
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
206
Car care
Index
Driving instructions
Tire traction
Tire speed rating
The safe speed on a wet, snow covered or icy road is
always lower than on a dry road.
CLK 320:
Your vehicle is factory equipped with “H”-rated tires,
which have a speed rating of 130 mph (210 km/h).
You should pay particular attention to the condition of
the road whenever the outside temperatures are close to
the freezing point.
An electronic speed limiter prevents your vehicle from
exceeding a speed of 130 mph (210 km/h).
CLK 320 with Sport Package, CLK 430:
Your vehicle is factory equipped with “W”-rated tires,
which are permissible for speeds up to 168 mph
(270 km/h).
Warning!
If ice has formed on the road, tire traction will be
substantially reduced. Under such weather
conditions, drive, steer and brake with extreme
caution.
An electronic speed limiter prevents your vehicle from
exceeding a speed of 130 mph (210 km/h).
Despite the tire rating, local speed limits should be
obeyed. Use prudent driving speeds appropriate to
prevailing conditions.
We recommend M+S rated radial-ply tires for the winter
season for all four wheels to insure normal balanced
handling characteristics. On packed snow, they can
reduce your stopping distance as compared with
summer tires. Stopping distance, however, is still
considerably greater than when the road is not snow or
ice covered.
Warning!
Even when permitted by law, never operate a
vehicle at speeds greater than the maximum speed
rating of the tires.
Download from Www.Somanuals.com. All Manuals Search And Download.
Winter driving instructions
Exceeding the maximum speed for which tires are
rated can lead to sudden tire failure causing loss of
vehicle control and resulting in personal injury
and possible death.
The most important rule for slippery or icy roads is to
drive sensibly and to avoid abrupt acceleration, braking
and steering maneuvers. Do not use the cruise control
system under such conditions.
Snow chains
When the vehicle is in danger of skidding, move
selector lever to position “N”. Try to keep the vehicle
under control by corrective steering action.
Use only snow chains that are tested and recommended
by Mercedes-Benz. Your authorized Mercedes-Benz
Center will be glad to advise you on this subject.
Road salts and chemicals can adversely affect braking
efficiency. Increased pedal force may become necessary
to produce the normal brake effect. We therefore
recommend depressing the brake pedal periodically
when traveling at length on salt-strewn roads. This can
bring road salt impaired braking efficiency back to
normal. A prerequisite is, however, that this be done
without endangering other drivers on the road.
Chains should only be used on the rear wheels. Follow
the manufacturer’s mounting instructions.
Snow chains should only be driven on snow covered
roads at speeds not to exceed 30 mph (50 km/h).
Remove chains as soon as possible when driving on
roads without snow.
When driving with snow chains, press the ESP control
switch to OFF, refer to page 218.
Important!
Use of snow chains is not permissible with tire sizes
225/45 R17 and 245/40 R17.
Driving instructions
207
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
208
Car care
Index
Driving instructions
If the vehicle is parked after being driven on salt treated
roads, the braking efficiency should be tested as soon as
possible after driving is resumed while observing the
safety rules in the previous paragraph.
Winter driving
Have your vehicle winterized at your authorized
Mercedes-Benz Center before the onset of winter.
• Check engine coolant anticorrosion/antifreeze
concentration.
Warning!
• Additive for the windshield washer and headlamp
cleaning system: Add MB Concentrate “S” to a
premixed windshield washer solvent/antifreeze
which is formulated for below freezing temperatures
see page 255.
If the vehicle becomes stuck in snow, make sure
that snow is kept clear of the exhaust pipe and
from around the vehicle with engine running.
Otherwise, deadly carbon monoxide (CO) gases may
enter vehicle interior resulting in unconsciousness
and death.
• Test battery: Battery capacity drops with decreasing
ambient temperature. A well charged battery helps
to ensure that the engine can be started, even at low
ambient temperatures.
To assure sufficient fresh air ventilation, open a
window slightly on the side of the vehicle not
facing the wind.
• Tires: We recommend M+S rated radial-ply tires on
all four wheels for the winter season. Observe
permissible maximum speed for M+S rated
radial-ply tires and the legal speed limit.
In winter operation, the maximum effectiveness of the
antilock brake system (ABS) or of the electronic stability
program (ESP) can only be achieved with M+S rated
radial-ply tires and/or snow chains recommended by
Mercedes-Benz. Snow chains maximize performance.
Download from Www.Somanuals.com. All Manuals Search And Download.
For driving instructions with snow chains, see
page 207.
Passenger compartment
Warning!
Standing water
Caution!
Always fasten items being carried as securely as
possible.
In an accident, during hard braking or sudden
maneuvers, loose items will be thrown around
inside the vehicle, and cause injury to vehicle
occupants unless the items are securely fastened in
the vehicle.
Do not drive through flooded areas or water of unknown
depth.
If you must drive through standing water, drive slowly to
prevent water from entering the passenger
compartment or the engine compartment. Water in
these areas could cause damage to electrical
components or wiring of the engine or transmission, or
could result in water being ingested by the engine
through the air intake causing severe internal engine
damage. Any such damage is not covered by the
Mercedes-Benz Limited Warranty.
The trunk is the preferred place to carry objects.
Traveling abroad
Abroad, there is a widely-spread Mercedes-Benz service
network at your disposal. If you plan to travel into areas
which are not listed in the index of your Mercedes-Benz
Center directory, you should request pertinent
information from your authorized Mercedes-Benz
Center.
Block heater (Canada only)
The engine is equipped with a block heater.
The electrical cable may be installed at your authorized
Mercedes-Benz Center.
Driving instructions
209
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
210
Car care
Index
Driving systems
Cruise control
1 Accelerate and set:
Lift lever briefly to set speed.
Hold lever up to accelerate.
1
2 Decelerate and set:
Depress lever briefly to set speed.
Hold lever down to decelerate.
3
Normally the vehicle is accelerated to the desired
speed with the accelerator.
Speed is set by briefly pushing the lever to
position 1 or 2. The accelerator can then be
released.
4
The speed can be increased (e.g. for passing) by
using the accelerator. After the accelerator is
released, the previously set speed will be resumed
automatically.
2
The cruise control allows you to drive in a more relaxed
manner, for example over long distances, as it
automatically maintains the set speed by actively
regulating the throttle setting.
If a set speed is to be increased or decreased
slightly, e. g. to adapt to the traffic flow, hold lever in
position 1 or 2 until the desired speed is reached, or
briefly tip the lever in the appropriate direction for
increases or decreases in 0.6 mph (1 km/h)
increments. When the lever is released, the newly
set speed remains.
Any given speed above approximately 19 mph
(30 km/h) can be maintained with the cruise control by
operating the lever.
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Canceling
Important!
To cancel the cruise control, briefly push lever to
position 3.
Moving gear selector lever to position “N” switches the
cruise control off.
When you step on the brake pedal or the vehicle
speed drops below approx. 19 mph (30 km/h), for
example when driving upgrade, the cruise control
will be canceled.
Warning!
Only use the cruise control if the traffic and
weather conditions make it advisable to travel at a
steady speed.
If the cruise control cancels by itself and remains
inoperative until the engine is restarted, have the
system checked at your authorized Mercedes-Benz
Center as soon as possible.
• The use of cruise control can be dangerous on
winding roads or in heavy traffic because
conditions do not allow safe driving at a steady
speed.
4 Resume
• The use of cruise control can be dangerous on
slippery roads. Rapid changes in tire adhesion
can result in wheel spin and loss of control.
If the lever is briefly pushed to position 4 when
driving at a speed exceeding approx. 19 mph
(30 km/h), the vehicle resumes the speed which
was set prior to the cancellation of the cruise
control. The last memorized speed is canceled when
the electronic key in the steering lock is turned to
position 1 or 0.
The “Resume” function should only be operated if
the driver is fully aware of the previously set speed
and wishes to resume this particular preset speed.
Driving systems
211
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
212
Car care
Index
Driving systems
Notes:
Brake assist system (BAS)
If the engine does not brake the vehicle sufficiently
while driving on a downgrade, the speed you set on the
cruise control may be exceeded. In this case the
automatic transmission shifts down (max. to 3rd gear)
to maintain the set cruise control speed by using the
engine’s braking power.
Warning!
BAS cannot prevent the natural laws of physics
from acting on the vehicle, nor can it increase
braking efficiency beyond that afforded by the
condition of the vehicle brakes and tires or the
traction afforded. The BAS cannot prevent
accidents, including those resulting from excessive
speed in turns, following another vehicle too
closely, or aquaplaning. Only a safe, attentive, and
skillful driver can prevent accidents. The
capabilities of a BAS equipped vehicle must never
be exploited in a reckless or dangerous manner
which could jeopardize the user’s safety or the
safety of others.
As soon as the grade eases, the automatic transmission
shifts up again dependent on the selector lever position.
Nevertheless, in some cases you may have to step on the
brake pedal to slow down. In this case the cruise control
is switched off.
Use the lever to resume the previously set speed.
The BAS is designed to maximize the vehicle’s braking
capability during emergency braking maneuvers by
having maximum power boost applied to the brakes
more quickly in emergency braking conditions than
might otherwise be afforded solely by the driver’s
braking style. This can help reduce braking distances
over what ordinary driving and braking style might do.
The BAS complements the antilock brake system (ABS).
Download from Www.Somanuals.com. All Manuals Search And Download.
Applying the brakes very quickly results in maximum
BAS assistance.
If the charging voltage falls below 10 volts, the
malfunction indicator lamp comes on and the BAS is
switched off. When the voltage is above this value again,
the malfunction indicator lamp should go out and the
BAS is operational.
To receive the benefit of the system you must apply
continuous full braking power during the stopping
sequence. Do not reduce brake pedal pressure.
With the ABS malfunctioning, the BAS is also switched
off. Both malfunction indicator lamps come on with the
engine running.
Once the brake pedal is released, the BAS is deactivated.
The malfunction indicator lamp for the electronic
stability program (ESP) is combined with the BAS
malfunction indicator lamp.
If the BAS warning message is displayed, have the BAS
or ESP checked at your authorized Mercedes-Benz
Center as soon as possible.
The BAS/ESP malfunction indicator lamp in the
instrument cluster comes on with the electronic key in
steering lock position 2 and should go out with the
engine running.
If the BAS/ESP malfunction indicator lamp comes on
permanently while the engine is running, a malfunction
has been detected in either system. As a result, it is
possible that now only partial engine output will be
available. If the BAS malfunctions, the brake system
functions in the usual manner, but without BAS.
Driving systems
213
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
214
Car care
Index
Driving systems
Antilock brake system (ABS)
At the instant one of the wheels is about to lock up, a
slight pulsation can be felt in the brake pedal,
indicating that the ABS is in the regulating mode. Keep
firm and steady pressure on the brake pedal while
experiencing the pulsation.
Warning!
Do not pump the brake pedal, rather use firm,
steady brake pedal pressure. Pumping the brake
pedal defeats the purpose for ABS and significantly
reduces braking effectiveness.
Continuous steady brake pedal pressure results in
applying the advantages of the ABS, namely braking
power and ability to steer the vehicle.
Important!
In the case of an emergency brake maneuver keep
continuous full pressure on the brake pedal. In this
manner only can the ABS be most effective.
The ABS improves steering control of the vehicle during
hard braking maneuvers.
On slippery road surfaces, the ABS will respond even
with light brake pedal pressure because of the
increased likelihood of locking wheels. The pulsating
brake pedal can be an indication of hazardous road
conditions and functions as a reminder to take extra
care while driving.
The ABS prevents the wheels from locking up above a
vehicle speed of approximately 5 mph (8 km/h)
independent of road surface conditions.
Download from Www.Somanuals.com. All Manuals Search And Download.
ABS control
If the ABS malfunction indicator lamp stays illuminated,
have the system checked at your authorized
Mercedes-Benz Center as soon as possible.
The ABS malfunction indicator lamp - in the
instrument cluster comes on with the electronic key in
steering lock position 2 and should go out with the
engine running.
Warning!
ABS cannot prevent the natural laws of physics
from acting on the vehicle, nor can it increase
braking or steering efficiency beyond that afforded
by the condition of the vehicle brakes and tires or
the traction afforded. The ABS cannot prevent
accidents, including those resulting from excessive
speed in turns, following another vehicle too
closely, or aquaplaning. Only a safe, attentive, and
skillful driver can prevent accidents. The
capabilities of an ABS equipped vehicle must never
be exploited in a reckless or dangerous manner
which could jeopardize the user’s safety or the
safety of others.
When the ABS malfunction indicator lamp in the
instrument cluster comes on while the engine is
running, it indicates that the ABS has detected a
malfunction and has switched off. In this case, the brake
system functions in the usual manner, but without
antilock assistance.
For ABS malfunction indicator lamp, see page 227.
With the ABS malfunctioning, the BAS and ESP are also
switched off. Both malfunction indicator lamps come on
with the engine running.
If the charging voltage falls below 10 volts, the
malfunction indicator lamp comes on and the ABS is
switched off. When the voltage is above this value again,
the malfunction indicator lamp should go out and the
ABS is operational.
Note:
To alert following vehicles to slippery road conditions
you discover, operate your hazard warning flashers as
appropriate.
Driving systems
215
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
216
Car care
Index
Driving systems
Electronic stability program (ESP)
Important!
If the ESP warning lamp v flashes:
Warning!
• During take-off apply as little throttle as possible.
ESP cannot prevent the natural laws of physics
from acting on the vehicle, nor can it increase the
traction afforded. The ESP cannot prevent
accidents, including those resulting from excessive
speed in turns, or aquaplaning. Only a safe,
attentive, and skillful driver can prevent accidents.
The capabilities of an ESP equipped vehicle must
never be exploited in a reckless or dangerous
manner which could jeopardize the user’s safety or
the safety of others.
• While driving ease up on the accelerator.
• Adapt your speed and driving to the prevailing road
conditions.
• Do not switch off the ESP.
Caution!
If the vehicle is towed with the front axle raised (see
towing the vehicle on page 273), the engine must be
shut off (electronic key in steering lock position 0 or 1).
Otherwise, the ESP will immediately be engaged and
will apply the rear wheel brakes.
The ESP enhances directional control and reduces
driving wheel spin of the vehicle under various driving
conditions.
Over/understeering of the vehicle is counteracted by
applying brakes to the appropriate wheel to create a
countervailing vehicle movement. Engine torque is also
limited. The ESP warning lamp, located in the
speedometer dial, starts to flash when ESP is in
operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
Driving the vehicle with varied size tires will cause the
wheels to rotate at different speeds, therefore the ESP
may activate (yellow ESP warning lamp in speedometer
dial comes on). For this reason, all wheels, including the
spare wheel, must have the same tire outside diameter.
The malfunction indicator lamp ¿ for the ESP is
combined with that of the BAS.
The yellow BAS/ESP malfunction indicator lamp in the
instrument cluster and the yellow ESP warning
lamp v in the speedometer dial come on with the
electronic key in steering lock position 2. They should
go out with the engine running.
When testing the parking brake on a brake test
dynamometer, the engine must be shut off. Otherwise,
the ESP will immediately be engaged and will apply the
rear wheel brakes.
If the BAS/ESP malfunction indicator lamp comes on
continuously with the engine running, a malfunction
has been detected in either system. Only partial engine
output will be available.
In winter operation, the maximum effectiveness of the
ESP is only achieved with Mercedes-Benz recommended
M+S rated radial-ply tires and/or snow chains.
If the BAS malfunctions, the brake system functions in
the usual manner, but without BAS.
Synchronizing ESP
If the power supply was interrupted (battery
disconnected or empty), the BAS/ESP malfunction
indicator lamp may be illuminated with the engine
running.
If the ESP warning message is displayed, have the BAS
or ESP checked at your authorized Mercedes-Benz
Center as soon as possible.
For ESP warning message, see page 241.
Turn steering wheel completely to the left and then to
the right. The BAS/ESP malfunction indicator lamp
should go out.
With the ABS malfunctioning, the ESP is also switched
off.
Driving systems
217
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
218
Car care
Index
Driving systems
ESP control switch
To improve the vehicle’s traction when driving with
snow chains, or starting off in deep snow, sand or gravel,
switch off ESP by pressing the upper half of the ESP
switch. The ESP warning lamp v, located in the
speedometer dial, is continuously illuminated.
Warning!
When the ESP warning lamp is illuminated
continuously, the ESP is switched off.
Adapt your speed and driving to the prevailing road
conditions.
With the ESP system switched off, the engine torque
reduction feature is cancelled. Therefore, the enhanced
vehicle stability offered by ESP is unavailable.
P54.25-2037-26
ESP control switch located on center console.
To switch ESP off, press upper half of the switch.
Adapt your speed and driving to the prevailing road
conditions.
A portion of the ESP system remains active, even with
the switch in the OFF position.
ESP warning lamp v, located in speedometer dial,
comes on.
If one drive wheel loses traction and begins to spin, the
brake is applied until the wheel regains sufficient
traction. The traction control engages at vehicle speeds
up to approximately 24 mph (40 km/h), and switches off
at 50 mph (80 km/h).
To switch ESP on again, press lower half of the switch.
ESP warning lamp v, located in speedometer dial,
goes out.
Download from Www.Somanuals.com. All Manuals Search And Download.
Note:
Important!
Avoid spinning of a drive wheel. This may cause serious
damage to the drivetrain which is not covered by the
Mercedes-Benz Limited Warranty.
If the ESP warning lamp flashes:
• during take-off, apply as little throttle as possible,
• while driving, ease up on the accelerator.
Warning!
ESP should not be switched off during normal
driving other than in circumstances described
above. Disabling of the system will reduce vehicle
stability in standard driving maneuvers.
The ESP warning lamp, located in the speedometer dial,
starts to flash at any vehicle speed as soon as the tires
lose traction and the wheels begin to spin.
To return to the enhanced vehicle stability offered by
ESP: press lower half of the switch (the ESP warning
lamp in the speedometer dial goes out).
Driving systems
219
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
220
Car care
Index
What you should know at the gas station
What you should know at the gas station
Open flap by pushing near front (arrow). Turn fuel cap
to the left and hold on to it until possible pressure in
tank has been released, then remove cap. Failure to
remove slowly could result in personal injury.
Manual release of fuel filler flap, see page 296.
Fuel
To prevent fuel vapors from escaping into open air, fully
insert filler nozzle unit. Only fill fuel tank until the filler
nozzle unit cuts out – do not top up or overfill.
Warning!
Overfilling of fuel tank may result in creating
pressure in the system which could cause a gas
discharge such as the gas spraying back out upon
removing the filler nozzle which could cause
personal injury.
Fuel supply
Warning!
Gasoline is highly flammable and poisonous. It
burns violently and can cause serious injury.
Whenever you are around gasoline, avoid inhaling
fumes and skin contact, extinguish all smoking
materials. Never allow sparks, flame or smoking
materials near gasoline!
Leaving the engine running and the fuel cap open can
cause the “CHECK ENGINE” lamp to illuminate.
Fuel tank capacity approx. 16.4 US gal (62.0 l).
This includes approx. 2.1 US gal (8.0 l) reserve. Use
premium unleaded gasoline: Posted Octane Index 91
(Average of 96 RON/86 MON).
Download from Www.Somanuals.com. All Manuals Search And Download.
• Engine oil
• Air conditioner
Engine oil level check, see page 108 and page 252.
R-134a refrigerant and special PAG lubricant, see
page 316.
Fill quantity between upper and lower dipstick
marking level: 2.1 US qt (2.0 l).
• Bulbs
Recommended engine oils, see Approved Service
Products sheet.
High and low beams: H7 (55 W),
low beam: Xenon (optional)
fog lamps: H1 (55 W),
turn signal lamps,
• Coolant
For normal replenishing, use water (potable water
quality).
front 1156 NA (26.9/5 W/32/4 cp),
parking and standing lamps, front: H 6W (6 W),
side marker lamps, front: 5 W/4 cp,
turn signal lamps, rear: 21 W/24 cp,
stop, tail, parking and side marker lamps: 21/4 W,
tail and parking lamp: 5 W/4 cp,
rear fog lamp, driver’s side: 21 W/32 cp,
backup lamps: 21 W/32 cp,
For further information (e.g. anticorrosion/
antifreeze), see page 316.
• Spark plugs
Approved spark plugs, see page 314.
• Tire pressure
license plate lamps: 5 W/4 cp.
For tire pressure, refer to tire pressure label inside
the fuel filler flap. See page 268 for further details.
What you should know at the gas station
221
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
222
Car care
Index
Check regularly and before a long trip
Check regularly and before a long trip
1 Engine oil level
See “Engine oil level, checking” on page 108 and
page 252.
2 Coolant level
See “Coolant level” on page 253.
3 Brake fluid
See “Brake fluid” on page 318.
4 Windshield washer system
Headlamp cleaning system
For refilling reservoir see page 255.
Opening hood, see page 250.
Vehicle lighting: Check function and cleanliness. For
replacement of light bulbs, see “Exterior lamps” on
page 277.
Exterior lamp switch, see page 110.
Download from Www.Somanuals.com. All Manuals Search And Download.
Malfunction and indicator lamps in
the center console .................... 228
AIRBAG OFF indicator lamp ....228
Roll bar warning lamp .............. 229
Malfunction and warning messages
in the multifunction display ...230
DISPLAY DEFECTIVE (engine
control unit) ................................ 231
DISPLAY DEFECTIVE (several
systems) ...................................... 231
BATTERY/ALTERNATOR ..........232
ABS-SYSTEM .............................. 233
BRAKE ASSIST ...........................233
BRAKE LINING WEAR .............. 234
BRAKE FLUID ............................234
PARKING BRAKE .......................235
ENGINE FAN ............................... 235
COOLANT (coolant level) .........236
COOLANT TEMP. (coolant
LIGHTING SYSTEM ....................238
LIGHT SENSOR ...........................239
Instrument cluster display
Malfunction and indicator lamps in
the instrument cluster .............224
On-board diagnostic system Check
engine malfunction indicator
lamp ..............................................224
Brake warning lamp ..................225
Supplemental restraint system
(SRS) indicator lamp ..................226
Fuel reserve and fuel cap
placement warning ....................226
Electronic stability program (ESP)
— warning lamp ..........................227
BAS/ESP malfunction indicator
lamp ..............................................227
ABS malfunction indicator
lamp ..............................................227
Telescoping steering column –
indicator lamp .............................228
Seat belt warning lamp .............228
STEER. WHEEL ADJUST. ...........239
ENGINE OIL LEVEL ...................240
ELEC. STABIL. PROG. (Electronic
stability program) ......................241
REMOVE KEY .............................241
WASHER FLUID .........................242
TELE AID .....................................243
temperature) ............................... 237
223
Instruments
and controls
Instrument
cluster display
Technical
Car care
Operation
Driving
Practical hints
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
224
Car care
Index
Malfunction and indicator lamps
Malfunction and indicator lamps
in the instrument cluster
out of fuel), serious damage can occur to the emission
system. Please contact your authorized Mercedes-Benz
Center immediately.
General information:
The Sequential Multiport Fuel Injection (SFI) control
module monitors emission control components that
either provide input signals to or receive output signals
from the control module. Malfunctions resulting from
interruptions or failure of any of these components are
indicated by the “CHECK ENGINE” malfunction
indicator lamp in the instrument cluster and are
simultaneously stored in the SFI control module.
If a bulb in the instrument cluster fails to light up
during the bulb self-check when turning the electronic
key in steering lock to position 2, have it checked and
replaced if necessary.
On-board diagnostic system
Check engine malfunction indicator lamp
If the “CHECK ENGINE” malfunction indicator lamp
comes on, have the system checked at your authorized
Mercedes-Benz Center as soon as possible.
Engine malfunction indicator lamp. If the
“CHECK ENGINE” malfunction indicator
lamp comes on when the engine is running,
CHECK
ENGINE
With some exceptions, the control module switches off
the “CHECK ENGINE” malfunction indicator lamp if the
condition, causing the lamp to come on, no longer exists
during three consecutive cycles. See also page 226 for
fuel cap placement warning.
it indicates a malfunction of the fuel management
system, emission control system, systems which impact
emissions, or the fuel cap is not closed tight (check the
fuel cap). If the “CHECK ENGINE” lamp is illuminated
continuously and the vehicle is driving normally, you
may still drive the vehicle, however, in all cases, we
recommend that you have the system checked at your
authorized Mercedes-Benz Center as soon as possible.
An on-board diagnostic connector is located in the
passenger compartment near to the parking brake
pedal, allowing the accurate identification of system
malfunctions through the readout of diagnostic trouble
codes.
If the “CHECK ENGINE” lamp comes on continuously
and/or the vehicle is not driving normally (e.g.
malfunction of the fuel management system or running
Download from Www.Somanuals.com. All Manuals Search And Download.
Brake warning lamp
Warning!
Driving with the brake warning lamp illuminated
can result in an accident. Have your brake system
checked immediately if the brake warning lamp
stays on. Don’t add brake fluid before checking the
brake system. Overfilling the brake fluid reservoir
can result in spilling brake fluid on hot engine
parts and the brake fluid catching fire. You can be
seriously burned.
BRAKE
Except Canada
Canada only
When the brake warning lamp and message appear
while the engine is running, this means:
• there is insufficient brake fluid in the reservoir
Note:
(engine running and parking brake released), or
If you find that the brake fluid in the brake fluid
reservoir has fallen to the minimum mark or below,
have the brake system checked for brake pad thickness
and leaks.
• the parking brake is set (engine running).
Malfunction and indicator lamps
225
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
226
Car care
Index
Malfunction and indicator lamps
Supplemental restraint system (SRS) indicator lamp
Fuel reserve and fuel cap placement warning
The operational readiness of the airbag
system is verified by the indicator lamp
“SRS” in the instrument cluster when
SRS
turning the electronic key in steering lock to position 1
or 2. If no malfunction is detected, the lamp will go out
after approximately 4 seconds; after the lamp goes out,
the system continues to monitor the components and
circuitry of the airbag system and will indicate a
malfunction by coming on again.
1
P54.30-4557-21
When the warning lamp (1) comes on after starting the
engine, or if it comes on while driving, it indicates that
the fuel level is down to the reserve quantity of
approximately 2.1 gal (8 liters).
Warning!
In the event a malfunction of the “SRS” is indicated
as outlined above, the “SRS” may not be
operational. For your safety, we strongly
recommend that you visit an authorized
Mercedes-Benz Center immediately to have the
system checked; otherwise the “SRS” may not be
activated when needed in an accident, which could
result in serious or fatal injury, or it might deploy
unexpectedly and unnecessarily which could also
result in injury.
The warning lamp blinks when the fuel cap is not
closed, or a fuel system leak has been detected.
Retighten cap and see if lamp goes out after restart and
next OBD selfcheck.
If the warning lamp continues to blink after closing the
fuel cap correctly, have the fuel system checked at your
authorized Mercedes-Benz Center as soon as possible.
Leaving the engine running and the fuel cap open can
also cause the “CHECK ENGINE” lamp to illuminate, see
page 224.
See page 61 for notes on airbags, see page 60 for belt
tensioners and page 69 for infant and child seat
restraint.
Download from Www.Somanuals.com. All Manuals Search And Download.
Electronic stability program (ESP) — warning lamp
ABS malfunction indicator lamp
The ABS malfunction indicator lamp in the
instrument cluster comes on with the
electronic key in steering lock position 2 and
should go out with the engine running.
The yellow ESP warning lamp in the
speedometer dial comes on with the
electronic key in steering lock position 2.
It should go out with engine running.
ABS
When the ABS malfunction indicator lamp and the
malfunction message in the instrument cluster remains
illuminated while the engine is running, it indicates
that the ABS has detected a malfunction and has
switched off. In this case, the brake system functions in
the usual manner, but without antilock assistance.
See page 216 if the warning lamp lights up or flashes
when the vehicle is moving.
BAS/ESP malfunction indicator lamp
The malfunction indicator lamp for the ESP
is combined with that of the BAS.
BAS
ESP
With the ABS malfunctioning, the BAS and ESP are also
switched off. Both malfunction indicator lamps and the
ABS malfunction message in the multifunction display
come on with the engine running.
The yellow BAS/ESP malfunction indicator
lamp in the instrument cluster comes on with the
electronic key in steering lock position 2. It should go
out with the engine running.
If the charging voltage falls below 10 volts, the
malfunction indicator lamp comes on and the ABS is
switched off. When the voltage is above this value again,
the malfunction indicator lamp should go out and the
ABS is operational.
If the BAS/ESP malfunction indicator lamp remains
illuminated with the engine running, see page 212 for
notes on the brake assist (BAS) and page 216 for notes
on the electronic stability program (ESP).
Have the system checked at your authorized
Mercedes-Benz Center as soon as possible.
See page 214 for notes on the antilock brake system
(ABS).
Malfunction and indicator lamps
227
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
228
Car care
Index
Malfunction and indicator lamps
Telescoping steering column – indicator lamp
Malfunction and indicator lamps in the
center console
The indicator lamp in the instrument cluster
comes on with the electronic key in steering
lock position 2 and should go out with the
engine running.
AIRBAG OFF indicator lamp
The 7 indicator lamp will light up for approx.
6 seconds when you turn the electronic key in steering
lock to position 1 or 2.
If the indicator lamp does not go out after starting the
engine, the adjustable steering column is not properly
locked.
The 7 indicator lamp stays lit as long as a
BabySmartTM compatible child seat is properly installed
on the front passenger seat. It indicates that the front
passenger airbag is switched off.
For locking the adjustable telescoping steering column,
see page 73.
See page 59 for BabySmartTM deactivation system.
Seat belt warning lamp
With the electronic key in steering lock
position 2, the seat belt warning lamp comes
on and a warning sounds for approx.
BabySmartTM is a trademark of Siemens Automotive Corp.
6 seconds if the driver’s seat belt is not fastened.
Download from Www.Somanuals.com. All Manuals Search And Download.
Roll bar warning lamp
Warning!
The BabySmartTM airbag deactivation system will
ONLY work with a special child seat designed to
operate with it. It will not work with child seats
which are not BabySmartTM compatible.
The roll bar warning lamp is located in the roll bar
switch in the center console. Roll bar switch see
page 47.
With the electronic key in steering lock position 2, the
roll bar warning lamp comes on and should go out with
the engine running.
Never place anything between seat cushion and
child seat (e.g. pillow), since it reduces the
effectiveness of the deactivation system.
With the engine running and the roll bar lowered, the
warning lamp in the roll bar switch will blink for
approx. 15 seconds. The blinking is reminding you to
raise the roll bar if the rear passenger seats are
occupied.
Follow the manufacturer’s instructions for
installation of special child seats.
When using a BabySmartTM compatible child seat
on the front passenger seat, the front passenger
airbag will not deploy only if the 7 indicator
lamp remains illuminated.
Warning!
Please be sure to check the indicator every time
you use the special system child seat.
If the warning lamp does not go out after starting
the engine, or if it comes on while driving, then the
roll bar system is not operating properly and may
not activate in an accident. In this case, raise the
roll bar manually (see page 48) before continuing
to drive.
Should the light go out while the restraint is
installed, please check installation. If the light
remains out, do not use the BabySmartTM restraint
to transport children on the front passenger seat
until the system has been repaired.
Note:
Have the roll bar system checked at your authorized
Mercedes-Benz Center as soon as possible.
Malfunction and indicator lamps
229
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
230
Car care
Index
Malfunction and warning messages
Malfunction and warning messages in the
multifunction display
Notes:
Certain malfunction and warning messages are
accompanied by an audible signal.
Malfunction and warning messages in red are always
accompanied by an audible signal.
Malfunction and warning messages for the following
systems will be displayed immediately in the
multifunction display.
These messages can be cleared from the instrument
cluster by:
Temporary messages such as “SWITCH OFF LIGHTS”
will not be stored in the malfunction message memory.
• using the J button on the instrument cluster, or
• pressing button j, k, è or ÿ on the
Warning!
All messages contain important information which
should be taken note of and, where malfunction
indicated, addressed as soon as possible at an
authorized Mercedes-Benz Center.
multifunction steering wheel.
They are then stored in the malfunction message
memory. See page 100.
Failure to repair condition noted may cause
damage not covered by the Mercedes-Benz Limited
Warranty, or result in property damage or personal
injury.
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY DEFECTIVE (engine control unit)
DISPLAY DEFECTIVE (several systems)
Line 1
Line 2
Line 1
Line 2
DISPLAY DEFECTIVE
VISIT WORKSHOP!
DISPLAY DEFECTIVE
VISIT WORKSHOP!
This message is displayed to indicate that the
The displays for several systems have failed. Some
systems themselves may also have failed.
information being relayed by the engine control unit is
no longer complete. The coolant temperature gauge,
tachometer, or the cruise control may have failed.
Malfunction and warning messages
231
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
232
Car care
Index
Malfunction and warning messages
BATTERY/ALTERNATOR
This message indicates a malfunction which must be
repaired immediately.
It may indicate that the poly-V-belt has broken. Should
this condition occur, the poly-V-belt must be replaced
before continuing to operate the vehicle. Otherwise, the
engine will overheat due to an inoperative water pump
which may result in damage to the engine.
Do not continue to drive the vehicle with this message
displayed.
Doing so could result in serious engine damage that is
not covered by the Mercedes-Benz Limited Warranty.
Line 1
Line 2
BATTERY/ALTERNATOR
OVERVOLTAGE
UNDERVOLTAGE
VISIT WORKSHOP!
VISIT WORKSHOP!
CONSUMER DEFECTIVE!
Download from Www.Somanuals.com. All Manuals Search And Download.
ABS-SYSTEM
BRAKE ASSIST
P54.30-2938-21
Line 1
Line 2
Line 1
Line 2
ABS-SYSTEM
VISIT WORKSHOP!
BRAKE ASSIST
DISPLAY DEFECTIVE
VISIT WORKSHOP!
VISIT WORKSHOP!
A malfunction has been detected in the system. The
brake system functions in the usual manner, but
without antilock assistance.
A malfunction has been detected in the system. The
brake system functions in the usual manner, but
without BAS.
With the ABS malfunctioning, the BAS and ESP are also
switched off.
Have the system checked at your authorized
Mercedes-Benz Center as soon as possible.
Malfunction and warning messages
233
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
234
Car care
Index
Malfunction and warning messages
BRAKE LINING WEAR
BRAKE FLUID
Line 1
Line 2
Line 1
Line 2
VISIT WORKSHOP!
BRAKE LINING WEAR
VISIT WORKSHOP!
BRAKE FLUID
When this message appears during braking, it indicates
that the brake pads are worn down.
Warning!
Driving with this message displayed can result in
an accident. Have your brake system checked
immediately. Don’t add brake fluid before checking
the brake system. Overfilling the brake fluid
reservoir can result in spilling brake fluid on hot
engine parts and the brake fluid catching fire. You
can be seriously burned.
Have the brake system checked at your authorized
Mercedes-Benz Center as soon as possible.
Brake pad thickness must be visually checked by a
qualified technician at the intervals specified in the
service booklet.
Download from Www.Somanuals.com. All Manuals Search And Download.
PARKING BRAKE
ENGINE FAN
Line 1
Line 2
Line 1
Line 2
PARKING BRAKE
RELEASE BRAKE!
ENGINE FAN
VISIT WORKSHOP!1
1
The cooling fan for the coolant is faulty. Observe coolant
temperature gauge while driving, see page 82.
Parking brake, see page 200.
Malfunction and warning messages
Instruments
235
Instrument
Technical
data
Operation
Driving
Practical hints
Car care
Index
and controls
cluster display
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
236
Car care
Index
Malfunction and warning messages
COOLANT (coolant level)
The low engine coolant level warning should not be
ignored. Extended driving with the symbol displayed
may cause serious engine damage not covered by the
Mercedes-Benz Limited Warranty.
In cases of major or frequent minor coolant loss, have
the cooling system checked at your authorized
Mercedes-Benz Center as soon as possible.
Notes:
Do not drive without sufficient amount of coolant in the
cooling system. The engine will overheat causing major
engine damage.
Line 1
Line 2
COOLANT
CHECK LEVEL!
Monitor the coolant temperature gauge while driving.
See page 253 for instructions on adding coolant.
When this message appears while driving, the coolant
level has dropped below the required level. If no leaks
are noticeable and the engine temperature does not
increase, continue to drive to the nearest service station
and have coolant added to the coolant system.
Warning!
Do not spill antifreeze on hot engine parts.
Antifreeze contains ethylene glycol which may
burn if it comes into contact with hot engine parts.
You can be seriously burned.
Download from Www.Somanuals.com. All Manuals Search And Download.
COOLANT TEMP. (coolant temperature)
During severe operating conditions and stop-and-go city
traffic, the coolant temperature may rise close to the red
marking.
The engine should not be operated with the coolant
temperature in the red zone. Doing so may cause
serious engine damage which is not covered by the
Mercedes-Benz Limited Warranty.
Warning!
Driving when your engine is badly overheated can
cause some fluids which may have leaked into the
engine compartment to catch fire. You could be
seriously burned.
Line 1
Line 2
COOLANT TEMP.
VISIT WORKSHOP!1
Steam from an overheated engine can cause serious
burns and can occur just by opening the engine
hood. Stay away from the engine if you see or hear
steam coming from it.
1
Observe coolant temperature gauge, see page 82.
Check coolant level, see page 253.
This may indicate that the poly-V-belt has broken. Should this
condition occur, the poly-V-belt must be replaced before continuing
to operate the vehicle. Otherwise, the engine will overheat due to
an inoperative water pump which may result in damage to the
engine. Do not continue to drive the vehicle with this message
displayed. Doing so could result in serious engine damage that is
not covered by the Mercedes-Benz Limited Warranty.
Turn off the engine, get out of the vehicle and do
not stand near the vehicle until it cools down.
Malfunction and warning messages
237
Instruments
Operation
Instrument
cluster display
Technical
Driving
Practical hints
Car care
Index
and controls
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
238
Car care
Index
Malfunction and warning messages
LIGHTING SYSTEM
When the message appears after starting the engine, or
if it comes on while driving, this indicates a failure in
the parking lamp, taillamp, stop lamp, or low beam
headlamp. See page 277 for instructions on replacing
bulbs.
If an exterior lamp fails, the message will appear only
when that lamp is switched on.
If a brake lamp fails, the message will appear when
applying the brake and stays on until the engine is
turned off.
Line 1
Line 2
Note:
LAMP DEFECTIVE
DISPLAY DEFECTIVE
CHECK LAMPS!
If additional lighting is installed (e.g. auxiliary
headlamps etc.) be certain to connect into the fuse
before the failure indicator monitoring unit order to
avoid damaging the system.
VISIT WORKSHOP!
Download from Www.Somanuals.com. All Manuals Search And Download.
LIGHT SENSOR
STEER. WHEEL ADJUST.
With the electronic key removed and the driver’s door
open, a warning sounds and the message “SWITCH OFF
LIGHTS!” appears in the multifunction indicator if the
vehicle’s exterior lamps (except standing lamps) are not
switched off.
Line 1
Line 2
STEER. WHEEL ADJUST.
For locking the adjustable telescoping steering column,
see page 73.
Malfunction and warning messages
239
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
240
Car care
Index
Malfunction and warning messages
ENGINE OIL LEVEL
3
There is a risk of damaging the engine or catalytic converter. The
engine oil level must be checked immediately. See Engine oil level
indicator on page 108.
4
The engine oil level has dropped to a critical level.
Check the engine oil level immediately. See Engine oil level
indicator on page 108 and check the engine for visible leakage
(loss of oil).
5
6
The measuring system is malfunctioning.
It may be that there is water in the engine oil. Have the engine oil
checked.
Line 1
Line 2
When the “ENGINE OIL LEVEL – CHECK LEVEL”
message appears while the engine is running and at
operating temperature, the engine oil level has dropped
to approximately the minimum mark on the dipstick.
ENGINE OIL LEVEL
ENGINE OIL LEVEL
ENGINE OIL LEVEL
ENGINE OIL LEVEL
ENGINE OIL SENSOR
ENGINE OIL
CHECK LEVEL!1
STOP, ENGINE OFF!2
REDUCE OIL LEVEL!3
VISIT WORKSHOP!4
VISIT WORKSHOP!5
VISIT WORKSHOP!6
When this occurs, the warning will first come on
intermittently and then stay on if the oil level drops
further.
If no oil leaks are noted, continue to drive to the nearest
service station where the engine oil should be topped to
the “full” mark on the dipstick with an approved oil.
The engine oil level warnings should not be ignored.
Extended driving with the symbol displayed could
result in serious engine damage that is not covered by
the Mercedes-Benz Limited Warranty.
1
2
The engine oil level must be checked immediately. See Engine oil
level indicator on page 108
There is no oil in the engine. There is a danger of engine damage.
Download from Www.Somanuals.com. All Manuals Search And Download.
ELEC. STABIL. PROG.
REMOVE KEY
(Electronic stability program)
P54.30-3573-21
Line 1
Line 2
Line 1
Line 2
DISPLAY DEFECTIVE
ELEC. STABIL. PROG.
VISIT WORKSHOP!
REMOVE KEY!
VISIT WORKSHOP!1, 2, 3
This message plus an audible alarm indicate that the
electronic key is in steering lock position 0 or 1, and the
driver’s door is open.
1
A malfunction has been detected in the system. Pressing the
accelerator pedal will require greater effort. Only partial engine
output will be available.
2
3
This message may be displayed if the power supply was
interrupted (battery disconnected or empty).
Synchronize ESP. See page 217
Malfunction and warning messages
241
Instruments
Operation
Instrument
cluster display
Technical
Driving
Practical hints
Car care
Index
and controls
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
242
Car care
Index
Malfunction and warning messages
WASHER FLUID
When this message appears while the engine is
running, the level of the reservoir has dropped to
approx. 1/3 of the total volume. The reservoir should be
refilled with the prescribed mixture of MB Windshield
Washer Concentrate “S” and water or the Concentrate
and commercially available premixed windshield
washer solvent/antifreeze, depending on ambient
temperature, at the next opportunity. The reservoir for
the windshield and headlamp washer systems is located
in the engine compartment.
See windshield washer system on page 255 for
instructions on adding washer fluid.
Line 1
Line 2
WASHER FLUID
CHECK LEVEL!
Download from Www.Somanuals.com. All Manuals Search And Download.
TELE AID
Line 1
Line 2
TELE AID
VISIT WORKSHOP!1
1
When this message appears, a malfunction has been detected in
the Tele Aid system. In some cases it may not be possible to initiate
an Emergency, Roadside Assistance or Information call.
See page 178 for notes on the Tele Aid.
If a malfunction is indicated as outlined above, have the
system checked at the nearest Mercedes-Benz Center as
soon as possible.
Malfunction and warning messages
243
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Spare wheel, vehicle tools, storage
compartment .............................256
Vehicle jack ....................................257
Wheels ............................................ 258
Adjusting headlamp aim ...............282
Changing batteries in the electronic
key ...............................................285
Synchronizing remote
control .........................................287
Raising soft top manually .............288
Antenna ...........................................295
Manual release for fuel filler
flap ..............................................296
Replacing wiper blade insert .......296
Practical hints
First aid kit .....................................246
Shelf below rear window ..............246
Stowing things in the vehicle ......246
Luggage cover .................................246
Fuses ................................................248
Hood .................................................250
Checking engine oil level .............252
Tire replacement .......................258
Rotating wheels ......................... 259
Spare wheel ....................................260
Spare wheel bolts .......................... 260
Spare wheel bolts ......................260
Spare wheel ....................................260
Changing wheels ...........................263
Tire inflation pressure ................. 268
Battery ............................................. 270
Jump starting ..................................271
Towing the vehicle ........................ 273
Exterior lamps ............................... 277
Headlamp assembly .................. 278
Taillamp assemblies .................. 280
Automatic transmission fluid
level .............................................253
Coolant level ...................................253
Adding coolant ...........................254
Windshield washer / headlamp
cleaning system .........................255
Windshield and headlamp washer
fluid mixing ratio .......................255
245
Instruments
and controls
Instrument
cluster display
Technical
Car care
Operation
Driving
Practical hints
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
246
Car care
Index
First aid kit
First aid kit
Luggage cover
The first aid kit is stored in the left trunk well.
Check expiration dates and contents for completeness at
least once a year and replace missing/expired items.
Shelf below rear window
Warning!
The shelf below the rear window should not be
used to carry objects. This will avoid such objects
from being thrown about and injuring vehicle
occupants during an accident or sudden maneuver.
The trunk is the preferred place to carry objects.
1 Handle
2 Holder
Stowing things in the vehicle
Warning!
To close compartment:
Pull out on handle (1) to the stop and guide luggage
cover into left and right holders (2).
To help avoid personal injury during a collision or
sudden maneuver, exercise care when stowing
things. Put luggage or cargo in the trunk if
possible. Do not pile luggage or cargo higher than
the seat backs. Do not place anything on the shelf
below the rear window.
Download from Www.Somanuals.com. All Manuals Search And Download.
Important!
To prevent damage to soft top or luggage/cargo when
lowering the roof:
• load trunk only to the height of the luggage cover,
• do not permit luggage/cargo to raise the closed
luggage cover,
• do not load anything on top of the luggage cover,
• do not operate the luggage cover with the soft top
lowered. Doing so will result in damage to the
luggage cover or the soft top.
P65.10-2007-26
Note:
To open compartment:
Opening and closing of the soft top can only be done
with the luggage cover and trunk lid closed.
Press button (arrow). Unhook luggage cover from
holders (2) and guide luggage cover with handle (1) into
storage compartment until handle (1) locks in place.
Luggage cover
247
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
248
Car care
Index
Fuses
Fuses
Fuse box in engine compartment
Before replacing a blown fuse, determine the cause of
the short circuit.
Spare fuses are supplied inside the main fuse box (1).
Observe amperage and color of fuse.
A special fuse puller is supplied with the vehicle tools.
1
Always use a new fuse for replacement. Never attempt to
repair or bridge a blown fuse.
A fuse chart can be found inside the corresponding fuse
box cover.
1 Main fuse box in engine compartment
To gain access to the main fuse box (1), press clamp
(arrow), lift the fuse box cover up and remove it.
To close the main fuse box, engage back end of cover
and let front end snap into place.
Download from Www.Somanuals.com. All Manuals Search And Download.
Auxiliary fuse box below the trunk floor
Auxiliary fuse box in the dashboard
2
P
2 Auxiliary fuse box below the trunk floor.
3 Auxiliary fuse box to left of exterior lamp switch.
To gain access, lift trunk floor.
To gain access, open door, pry off cover (3) and
remove.
Fuses
249
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
250
Car care
Index
Engine compartment
Hood
The engine is equipped with a transistorized
ignition system. Because of the high voltage it is
dangerous to touch any components (ignition coils,
spark plug sockets, diagnostic socket) of the
ignition system
Warning!
To help prevent personal injury, stay clear of
moving parts when the hood is open and the engine
is running. Be sure the hood is properly closed
before driving. When closing hood, use extreme
caution not to catch hands or fingers.
• with the engine running,
• while starting the engine,
• if ignition is “on” and the engine is turned
manually.
The radiator fan may continue to run for
approximately 30 seconds or even restart after the
engine has been turned off. Stay clear from fan
blades.
If you see flames, steam or smoke coming from the
engine compartment, or if the coolant temperature
gauge indicates that the engine is overheated, do
not open the hood. Move away from vehicle and do
not open the hood until the engine has cooled. If
necessary, call a fire department.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
3
1
2
P88.40-2017-26
P88.40-2025-26
To open:
Pull handle (2) to its stop out of radiator grill and open
hood (do not pull up on handle).
To unlock the hood, pull release lever (1) under the
driver’s side of the instrument panel. At the same time a
handle will extend out of the radiator grill (it may be
necessary to lift the hood up slightly).
To close:
Lower hood and let it drop into lock from a height of
approx. 1 ft. (30 cm), assisting with hands placed flat on
edges of hood (3).
Caution!
To avoid hood damage, please make sure that hood is
fully closed. If not, repeat closing procedure. Do not
push down on hood to attempt to fully close it.
To avoid damage to the windshield wiper or hood, open
the hood only with wiper in the parked position.
Engine compartment
251
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
252
Car care
Index
Engine compartment
Checking engine oil level (CLK 320 shown)
Wipe oil dipstick clean prior to checking the engine oil
level. Fully insert dipstick in tube, and remove after
three seconds to obtain accurate reading.
M e r c e d e s - B e n z
Oil level must be between the
lower (min) and upper (max) mark of
the dipstick.
2
M e r c e d e s - B e n z
1
Fill quantity between upper and lower dipstick marking
level is approximately 2.0 US qt (2.0 l).
Do not overfill the engine. Excessive oil must be drained
or siphoned. It could cause damage to engine and
catalytic converter not covered by the Mercedes-Benz
Limited Warranty.
1 Oil dipstick
See malfunction and warning messages on page 230 if
an engine oil level display appears on the multifunction
display when the engine is running.
2 Oil filler cap
To check the engine oil level, park vehicle on level
ground, with engine at normal operational temperature.
Note:
Check engine oil level approximately 5 minutes after
stopping the engine, allowing for the oil to return to the
oil pan.
See page 108 for engine oil level indicator.
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic transmission fluid level
Coolant level
The transmission has a permanent fill of automatic
transmission fluid.
Regular automatic transmission fluid level checks and
changes are not required. For this reason the dipstick is
omitted.
If you notice fluid leaks or gear shifting malfunctions,
have your authorized Mercedes-Benz Center check the
transmission fluid level.
P20.30-2032-26
To check the coolant level, the vehicle must be parked
on level ground and the engine stopped.
Check coolant level only when coolant is cold.
The coolant level should reach the black top part of the
reservoir.
Engine compartment
253
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
254
Car care
Index
Engine compartment
Adding coolant
• Using a rag, slowly open cap approximately
1/2 turn to relieve excess pressure. If opened
immediately, scalding hot fluid and steam will
be blown out under pressure.
If coolant has to be added, a 50/50 mixture of water and
MB anticorrosion/antifreeze should be added.
The drain plugs for the cooling system are located on
the right side of the engine block and at the bottom of
the radiator.
• Do not spill antifreeze on hot engine parts.
Antifreeze contains ethylene glycol which may
burn if it comes into contact with hot engine
parts.
Anticorrosion/antifreeze mixture, see page 321.
Warning!
In order to avoid possible serious burns or injury:
• Use extreme caution when opening the hood if
there are any signs of steam or coolant leaking
from the cooling system, or if the coolant
temperature gauge indicates that the coolant is
overheated.
• Do not remove pressure cap on coolant
reservoir if engine temperature is above 194°F
(90°C). Allow engine to cool down before
removing cap. The coolant reservoir contains
hot fluid and is under pressure.
Download from Www.Somanuals.com. All Manuals Search And Download.
Windshield washer/headlamp cleaning system
Warning!
Washer solvent/antifreeze is highly flammable. Do
not spill washer solvent/antifreeze on hot engine
parts, because it may burn. You can be seriously
burned.
Windshield and headlamp washer
fluid mixing ratio
1
For temperatures above freezing:
MB Windshield Washer Concentrate “S” and water.
1 part “S” to 100 parts water
(40 ml “S” to 1 gallon water).
P82.35-2017-26
1 Windshield washer/headlamp cleaning system fluid
For temperature below freezing:
reservoir
MB Windshield Washer Concentrate “S” and
commercially available premixed windshield washer
solvent/antifreeze.
Capacity approx. 7.4 US qt (7.0 l).
The reservoir should be refilled with MB Windshield
washer concentrate and water (or commercially
available premixed windshield washer solvent/
antifreeze, depending on ambient temperatures).
1 part “S” to 100 parts solvent
(40 ml “S” to 1 gallon solvent).
Engine compartment
255
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
256
Car care
Index
Spare wheel, vehicle jack
Spare wheel, vehicle tools, storage compartment
Lift trunk floor and engage handle in grip molding of
luggage cover.
To remove spare tire:
Turn luggage bowl counterclockwise and remove.
To store spare tire:
Place spare tire in wheel well and secure it with luggage
bowl. Turn luggage bowl clockwise to its stop.
Note:
Always lower trunk floor before closing trunk lid.
1 Trunk floor
2 Handle
3 Luggage bowl
4 Vehicle tools
Download from Www.Somanuals.com. All Manuals Search And Download.
Vehicle jack
Warning!
The jack is designed exclusively for jacking up the
vehicle at the jack tubes built into either side of the
vehicle. To help avoid personal injury, use the jack
only to lift the vehicle during a wheel change.
Never get beneath the vehicle while it is supported
by the jack. Keep hands and feet away from the area
under the lifted vehicle. Always firmly set parking
brake and block wheels before raising vehicle with
jack.
2
Do not disengage parking brake while the vehicle is
raised. Be certain that the jack is always vertical
when in use, especially on hills. Always try to use
the jack on level surface. Be sure that the jack arm
is fully inserted in the jack tube. Always lower the
vehicle onto sufficient capacity jackstands before
working under the vehicle.
1
P40.10-2027-26
1 Jack arm
2 Jack base
See illustration for proper storage of jack.
Before storing the jack on the felt in the spare wheel
well, the jack arm must be lowered almost to the base of
the jack.
Spare wheel, vehicle jack
257
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
258
Car care
Index
Tires, Wheels
Wheels
It is imperative that the wheel mounting bolts be
fastened to a tightening torque of 80 ft.lb. (110 Nm)
whenever wheels are mounted.
Replace rims or tires with the same designation,
manufacturer and type as shown on the original part.
See your authorized Mercedes-Benz Center for further
information.
For rim and tire specifications, refer to “Technical Data”
(page 312).
See your authorized Mercedes-Benz Center for
information on tested and recommended rims and tires
for summer and winter operation. They can also offer
advice concerning tire service and purchase.
Warning!
Worn, old tires can cause accidents. If the tire tread
is badly worn, or if the tires have sustained
damage, replace them.
When replacing rims, use only genuine
Tire replacement
Mercedes-Benz wheel bolts specified for the
particular rim type. Failure to do so can result in
the bolts loosening and possibly an accident.
Front tires should be replaced in sets. Rims and tires
must be of the correct size and type. For dimensions,
see “Technical Data” (page 312).
We recommend that you break in new tires for approx.
60 miles (100 km) at moderate speed.
Download from Www.Somanuals.com. All Manuals Search And Download.
Rotating wheels
Notes:
CLK 430
Thoroughly clean the inner side of the wheels any time
you rotate the wheels or wash the vehicle underside.
Wheel rotation applies only when winter tires are
mounted on all four wheels.
The use of retread tires is not recommended. Retread
tires may adversely affect the handling characteristics
and safety of the vehicle.
The wheels can be rotated according to the degree of
tire wear while retaining the same direction of travel.
Rotating, however, should be carried out as
Dented or bent rims can cause tire pressure loss and
damage to the tire beads. For this reason, check rims for
damage at regular intervals. The rim flanges must be
checked for wear before a tire is mounted. Remove
burrs, if any.
recommended by the tire manufacturer, before the
characteristic tire wear pattern (shoulder wear on front
wheels and tread center wear on rear wheels) becomes
visible, as otherwise the driving properties deteriorate.
Check and ensure proper tire inflation pressure after
rotating the wheels. For tire inflation pressure see
inside of fuel filler flap and also page 268.
Important!
Unidirectional tires must always be mounted with arrow
on tire sidewall pointing in direction of vehicle forward
movement.
Tires, Wheels
259
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
260
Car care
Index
Tires, Wheels
Spare wheel
The use of any wheel bolts other than wheel bolts (2) for
the steel spare wheel rim can cause physical damage to
the vehicle.
Spare wheel bolts (CLK 320 only)
CLK 320 (except Sport Package)
(Steel spare wheel rim)
1
2
Important!
Unidirectional tires must always be mounted with arrow
on tire sidewall pointing in direction of vehicle forward
movement.
If the arrow on tire side wall does not point in direction
of vehicle forward movement when using the spare
wheel, observe the following restrictions:
• Drive to the nearest tire repair facility as soon as
1 Wheel bolt for light alloy wheel rim
possible.
2 Wheel bolt for steel spare wheel rim
• Do not exceed vehicle speed of 50 mph (80 km/h).
Note:
For rim and tire specifications, see page 312.
Wheel bolts (2) must be used when mounting steel
spare wheel rim. The wheel bolts for the steel spare
wheel rim are located near the vehicle tool kit, see
page 256.
Warning!
Be sure to use the original length wheel bolts when
remounting the original light alloy wheel after it
has been repaired.
Download from Www.Somanuals.com. All Manuals Search And Download.
CLK 320 (with Sport Package)
(Steel spare wheel rim)
If the arrow on tire side wall does not point in direction
of vehicle forward movement when using the spare
wheel, observe the following restrictions:
Important!
• Drive to the nearest tire repair facility as soon as
possible.
The spare wheel rim size is 7 J x 16 H 2.
The dimensions of the spare wheels are different from
those of the road wheels. The spare wheel should only
be used temporarily and replaced with a regular road
wheel as quickly as possible.
• Do not exceed vehicle speed of 50 mph (80 km/h).
Unidirectional tires must always be mounted with arrow
on tire sidewall pointing in direction of vehicle forward
movement.
The spare wheel rim is mounted with a tire of size
205/55 R 16 91 H.
For rim and tire specifications, refer to “Technical Data”.
In the case of a flat tire, you may temporarily use the
spare wheel only when observing the following
restrictions:
Warning!
CLK 320 (with Sport Package):
The dimensions of the spare wheel are different
from those of the road wheels. As a result, the
vehicle handling characteristics change when
driving with a spare wheel mounted.
• Do not exceed vehicle speed of 50 mph (80 km/h).
• Drive to the nearest tire repair facility to have the
flat tire repaired or replaced as appropriate.
The spare wheel should only be used temporarily,
and replaced with a regular road wheel as quick as
possible.
• Do not operate vehicle with more than one spare
wheel mounted.
Do not exceed vehicle speed of 50 mph (80 km/h).
Tires, Wheels
261
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
262
Car care
Index
Tires, Wheels
CLK 430
For rim and tire specifications, refer to “Technical Data”
(page 312).
Important!
The spare wheel rim size is 71/2 J x 17 H 2.
Warning!
The spare wheel rim is for temporary use only. Use
for over a total of 12 000 miles (20 000 km)
(aggregate of all uses) may cause wheel rim failure
leading to an accident and possible injuries.
The spare wheel rim is for temporary use only. However,
that spare wheel rim is weight optimized and has a
limited service life of 12 000 miles (20 000 km) use
before a standard wheel rim must replace it.
The dimensions of the spare wheel are different
from those of the road wheels for the rear axle. As a
result, the vehicle handling characteristics change
when driving with a spare wheel mounted on the
rear axle.
If the arrow on tire side wall does not point in direction
of vehicle forward movement when using the spare
wheel, observe the following restriction:
• Drive to the nearest tire repair facility as soon as
possible.
The spare wheel should only be used temporarily,
and replaced with a regular road wheel as quick as
possible.
• Do not exceed vehicle speed of 50 mph (80 km/h).
Unidirectional tires must always be mounted with arrow
on tire sidewall pointing in direction of vehicle forward
movement.
Do not exceed vehicle speed of 50 mph (80 km/h).
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing wheels
Warning!
Move vehicle to a level area which is a safe distance
from the roadway.
Warning!
The jack is designed exclusively for jacking up the
vehicle at the jack tubes built into either side of the
vehicle. To help avoid personal injury, use the jack
only to lift the vehicle during a wheel change.
Never get beneath the vehicle while it is supported
by the jack. Keep hands and feet away from the area
under the lifted vehicle. Always firmly set parking
brake and block wheels before raising vehicle with
jack.
Before working on the vehicle, e.g. when changing
wheels, the roll bar should be raised with the
switch, and the electronic key be removed from the
steering lock, to prevent possible injury.
1. Set parking brake and turn on hazard warning
flasher.
2. Move selector lever to position “P” and turn off
engine.
Do not disengage parking brake while the vehicle is
raised. Be certain that the jack is always vertical
when in use, especially on hills. Always try to use
the jack on level surface. Be sure that the jack arm
is fully inserted in the jack tube. Always lower the
vehicle onto sufficient capacity jackstands before
working under the vehicle.
3. Prevent vehicle from rolling away by blocking
wheels with wheel chocks (not supplied with
vehicle) or sizable wood block or stone. When
changing a wheel on a hill, place chocks on the
downhill side blocking both wheels of the other
axle. On a level road, place one chock in front of and
one behind the wheel that is diagonally opposite to
the wheel being changed.
Tires, Wheels
263
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
264
Car care
Index
Tires, Wheels
P40.10-2479-26
4. Using the wrench, loosen but do not yet remove the
wheel bolts.
5. Remove the protective cover from the jack support
tube opening by inserting the screwdriver (supplied
in the tool kit) in the opening and prying it out.
The tube openings are located directly behind the
front wheel housings and in front of the rear wheel
housings.
Download from Www.Somanuals.com. All Manuals Search And Download.
1
P40.10-2481-26
P40.10-2482-26
6. Insert jack arm fully into the tube hole up to the
8. Unscrew upper-most wheel bolt and install
alignment bolt (1) supplied in the tool kit. Remove
the remaining bolts. Keep bolt threads protected
from dirt and sand.
stop. Place jack on firm ground. Position the jack so
that it is always vertical (plumb-line) as seen from
the side (see arrow), even if the vehicle is parked on
an incline.
9. Remove wheel. Grip wheel from the sides. Keep
hands from beneath the wheels.
7. Jack up the vehicle until the wheel is clear of the
ground. Never start engine while vehicle is raised.
Tires, Wheels
265
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
266
Car care
Index
Tires, Wheels
Important!
CLK 320 only:
When installing steel spare wheel rim, make certain to
use the correct wheel bolts, supplied in the vehicle tool
kit, page 256 and see page 260.
To avoid paint damage, place wheel flat against hub and
hold it there while installing first wheel bolt.
Unscrew the alignment bolt (1) to install the last wheel
bolt.
P40.10-2483-26
10. Clean contact surfaces of wheel and wheel hub.
Install wheel on wheel hub. Insert wheel bolts and
tighten them slightly.
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning!
Always replace wheel bolts that are damaged or
rusted.
Never apply oil or grease to wheel bolts.
Damaged wheel hub threads should be repaired
immediately.
4
2
3
Incorrect mounting bolts or improperly tightened
mounting bolts can cause the wheel to come off.
This could cause an accident. Be sure to use the
correct mounting bolts.
5
CLK 430:
P40.10-2484-26
The spare wheel rim is for temporary use only. Use
for over a total of 12 000 miles (20 000 km)
(aggregate of all uses) may cause wheel rim failure
leading to an accident and possible injuries.
Lower vehicle. Remove jack and insert jack tube cover.
11. Using the wrench, tighten the five bolts evenly,
following the sequence illustrated, until all bolts are
tight.
Observe a tightening torque of 80 ft.lb. (110 Nm).
12. Ensure proper tire pressure.
Tires, Wheels
267
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
268
Car care
Index
Tires, Wheels
Tire inflation pressure
Warning!
CLK 320 with Sport Package:
A table (see fuel filler flap) lists the tire inflation
pressures specified for Mercedes-Benz recommended
tires as well as for the varying operating conditions.
The dimensions of the spare wheel are different
from those of the road wheels. As a result, the
vehicle handling characteristics change when
driving with a spare wheel mounted.
Important!
Tire pressure changes by approx. 1.5 psi (0.1 bar) per
18°F (10°C) of air temperature change. Keep this in
mind when checking tire pressure inside a garage –
especially in the winter.
CLK 430:
The dimensions of the spare wheel are different
from those of the road wheels for the rear axle. As a
result, the vehicle handling characteristics change
when driving with a spare wheel mounted on the
rear axle.
Example:
If garage temperature = approx. +68°F (+20°C) and
ambient temperature = approx. +32°F (0°C) then the
adjusted air pressure = specified air pressure +3 psi
(+0.2 bar).
The spare wheel should only be used temporarily,
and replaced with a regular road wheel as quick as
possible.
When using the spare wheel, do not exceed vehicle
speed of 50 mph (80 km/h).
Notes:
Before storing the jack, the jack arm must be lowered
almost to the base of the jack.
For proper storage of vehicle jack see page 257.
Download from Www.Somanuals.com. All Manuals Search And Download.
The pressures listed for light loads are minimum values
offering high driving comfort.
If a tire constantly loses air, it should be inspected for
damage.
Increased inflation pressures listed for heavier loads
may also be used for light loads. These higher pressures
produce favorable handling characteristics. The ride of
the vehicle, however, will be somewhat harder. Never
exceed the max. values or inflate tires below the min.
values listed in the fuel filler flap.
The spare tire should be checked periodically for
condition and inflation. Spare tire will age and become
worn over time even if never used, and thus should be
inspected and replaced when necessary.
Warning!
Tire temperature and pressure increase with the vehicle
speed. Tire pressure should therefore only be checked
and corrected on cold tires. Correct tire pressure in
warm tires only if pressure has dropped below the
pressure listed in the table and the respective operating
conditions are taken into consideration.
Do not overload the tires by exceeding the specified
vehicle capacity weight (as indicated by the label
on the driver’s door latch post). Overloading the
tires can overheat them, possibly causing a
blowout.
Follow recommended inflation pressures.
An underinflated tire due to a slow leak (e.g. due to a
nail in the tire) may cause damage such as tread
separation, bulging etc.. Regular tire pressure checks
(including the spare tire) at intervals of no more than
14 days are therefore essential.
Do not overinflate tires. Overinflated tires can
result in sudden deflation (blowout) because they
are more likely to become punctured or damaged
by road debris, potholes etc.
Do not underinflate tires. Underinflated tires wear
unevenly, adversely affect handling and fuel
economy, and are more likely to fail from being
overheated.
Tires, Wheels
269
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
270
Car care
Index
Battery
Battery
Warning!
Therefore, we strongly recommend that you have the
battery charge checked frequently, and corrected if
necessary, especially if you use the vehicle less than
approximately 200 miles (300 km) per month,
mostly for short distance trips, or if it is not used for
long periods of time.
Failure to follow these instructions can result in
severe injury or death.
Never lean over batteries while connecting, you
might get injured.
Only charge a battery with a battery charger after the
battery has been disconnected from the vehicle’s
electrical circuit.
Battery fluid contains sulfuric acid. Do not allow
this fluid to come in contact with eyes, skin or
clothing. In case it does, immediately flush affected
area with water and seek medical help if necessary.
Always disconnect the battery negative lead first and
connect last.
When removing and connecting the battery, always
make sure that all electrical consumers are off and the
electronic key is in steering lock position 0. The battery
and its filler caps must always be securely installed
when the vehicle is in operation. During removal and
installation always protect the disconnected battery
positive (+) terminal with the cover attached to the
battery.
A battery will also produce hydrogen gas, which is
flammable and explosive. Keep flames or sparks
away from battery, avoid improper connection of
jumper cables, smoking etc..
Important!
Battery replacement information:
The battery is located in the trunk under the trunk floor.
While the engine is running the battery terminal clamps
must not be loosened or detached, otherwise the
generator and other electronic components would be
damaged.
The service life of the battery is dependent on its
condition of charge. The battery should always be kept
sufficiently charged, in order to last an optimum length
of time.
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
Jump starting
Warning!
After reconnecting the battery also set the clock (see
page 102) resynchronize the front seats (see page 44),
front seat head restraints (see page 44), the express
feature of the power windows (see page 143), and the
electronic stability program (ESP) (see page 217).
Failure to follow these directions will cause
damage to the electronic components, and can lead
to a battery explosion and severe injury or death.
If the soft top is in a half open position, it also has to be
synchronized. To do so, raise and lock soft top manually
(see page 288).
Never lean over batteries while connecting or jump
starting, you might get injured.
Battery fluid contains sulfuric acid. Do not allow
this fluid to come in contact with eyes, skin or
clothing. In case it does, immediately flush affected
area with water, and seek medical help if
necessary.
Battery recycling
Batteries contain material that can harm the
environment with improper disposal.
A battery will also produce hydrogen gas, which is
flammable and very explosive. Keep flames or
sparks away from battery, avoid improper
connection of jumper cables, smoking etc..
Large 12 Volt storage batteries contain lead.
Recycling of batteries is the preferred method of
disposal.
Read all instructions before proceeding.
Many states require sellers of batteries to accept old
batteries for recycling.
Jump starting
271
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
272
Car care
Index
Jump starting
Important!
Proceed as follows:
A discharged battery can freeze at approx. +14°F
(–10°C). In that case, it must be thawed out before
jumper cables are used. Attempting to jump start a
frozen battery can result in it exploding, causing
personal injury.
1. Position the vehicle with the charged battery so that
the jumper cables will reach, but never let the
vehicles touch. Make sure the jumper cables do not
have loose or missing insulation.
2. On both vehicles:
Jumper cable specifications:
• Turn off engine and all lights and accessories,
• Minimum cable cross-section of 25 mm2 or approx.
except hazard warning flashers or work lights.
2 AWG
• Apply parking brake and shift selector lever to
• Maximum length of 11.5 ft. (3.5 m).
position “P”.
If the battery is discharged, the engine should be started
with jumper cables and the (12 V) battery of another
vehicle.
Important!
3. Clamp one end of the first jumper cable to the
positive (+) terminal of the discharged battery and
the other end to the positive (+) terminal of the
charged battery. Make sure the cable clamps do not
touch any other metal parts.
Only use 12 V battery to jump start your vehicle. Jump
starting with more powerful battery could damage the
vehicle’s electrical systems, which will not be covered
by the Mercedes-Benz Limited Warranty.
4. Clamp one end of the second jumper cable to the
grounded negative (–) terminal of the charged
battery and the final connection to the negative (–)
terminal (2) of the discharged battery.
The battery is located in the trunk under the trunk floor.
Download from Www.Somanuals.com. All Manuals Search And Download.
Important!
Towing the vehicle
Mercedes-Benz recommends that the vehicle be
transported with all wheels off the ground using flatbed
or appropriate wheel lift/ dolly equipment. This method
is preferable to other types of towing.
5. Start engine of the vehicle with the charged battery
and run at high idle. Make sure the cables are not
on or near pulleys, fans, or other parts that move
when the engine is started. Allow the discharged
battery to charge for a few minutes. Start engine of
the disabled vehicle in the usual manner.
Caution!
Use flatbed or wheel lift/ dolly equipment with key in
steering lock turned to position 0.
6. After the engine has started, remove jumper cables
by exactly reversing the above installation
sequence, starting with the last connection made
first. When removing each clamp, make sure that it
does not touch any other metal while the other end
is still attached to a battery.
Do not tow with sling- type equipment. Towing with
sling- type equipment over bumpy roads will damage
radiator and supports.
To prevent damage during transport, do not tie down
vehicle by its chassis or suspension parts.
Notes:
Switch off the tow-away alarm (see page 40) as well as
the ESP (see page 218).
If engine does not run after several unsuccessful
starting attempts, have it checked at the nearest
authorized Mercedes-Benz Center.
When circumstances do not permit the recommended
towing methods, the vehicle may be towed with all
wheels on the ground or front wheels raised only so far
as necessary to have the vehicle moved to a safe location
where the recommended towing methods can be
employed.
Excessive unburned fuel generated by repeated failed
starting attempts may damage the catalytic converter.
Towing
273
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
274
Car care
Index
Towing
Caution!
Warning!
If the vehicle is towed with the front axle raised, the
engine must be shut off (electronic key in steering lock
in position 0 or 1). Otherwise, the EPS will immediately
be engaged and will apply the rear wheel brakes.
If circumstances require towing the vehicle with
all wheels on the ground, always tow with a tow bar
if:
• the engine will not run
When towing the vehicle with all wheels on the ground,
the selector lever must be in position “N” and the key
must be in steering lock position 2.
• there is malfunction in the power supply or in
the vehicle´s electrical system
as that will be necessary to adequately control the
towed vehicle.
When towing the vehicle with all wheels on the ground
or the front axle raised, the vehicle may be towed only
for distances up to 30 miles (50 km) and at a speed not
to exceed 30 mph (50 km/h).
Prior to towing the vehicle with all wheels on the
ground, make certain that the electronic key is in
steering lock position 2.
To be certain to avoid a possibility of damage to the
drivetrain, however, we recommend the drive shaft be
disconnected at the rear axle drive flange for any towing
beyond a short tow to a nearby garage.
If the key is left in the steering lock position 0 for
an extended period of time, it can no longer be
turned in the lock. In this case, the steering is
locked. To unlock, remove electronic key from
steering lock and reinsert.
Important!
When towing the vehicle with all wheels on the ground,
please note the following:
Download from Www.Somanuals.com. All Manuals Search And Download.
With the automatic central locking activated and the
electronic key in steering lock position 2, the vehicle
doors lock if the left front wheel as well as the right rear
wheel are turning at vehicle speeds of approx. 9 mph
(15 km/h) or more. To prevent the vehicle doors from
locking, deactivate the automatic central locking, see
page 34.
Note:
To signal turns while being towed with hazard warning
flasher in use, turn electronic key in steering lock to
position 2 and activate combination switch for left or
right turn signal in usual manner – only the selected
turn signal will operate.
P88.20-2026-26
The rear towing eye is located at the right, below the
bumper. The front towing eye is located on the
passenger side behind a cover in the bumper panel.
Upon canceling the turn signal, the hazard warning
flasher will operate again.
CLK 320 (except Sport Package):
Warning!
Cover removal:
Insert finger in recess of cover and pull cover out.
With the engine not running, there is no power
assistance for the braking and steering systems. In
this case, it is important to keep in mind that a
considerably higher degree of effort is necessary to
brake and steer the vehicle.
Cover installation:
Engage cover at bottom and press in top securely.
Towing
275
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
276
Car care
Index
Towing
Transmission selector lever, manually unlocking
P88.20-2027-26
CLK 320 with Sport Package, CLK 430:
Cover removal:
Hold left and right end of grille and pull out.
In the case of power failure the transmission selector
lever can be manually unlocked, e.g. to tow the vehicle.
Cover installation:
Engage left and right end of grille and press in securely.
To do so, insert a pin (1), e.g. ball point pen, into the
covered opening below the position “D” of the shift
pattern. While pushing the pin down, move selector
lever from position “P”.
After removal of the pin from the opening, the cover will
not close fully. Only after moving the selector lever to
positions “D+” and “D–” does the cover return to its
closed position.
Download from Www.Somanuals.com. All Manuals Search And Download.
Exterior lamps
Notes:
To prevent a possible electrical short circuit, switch off
lamp prior to replacing a bulb.
Headlamp adjustment
When replacing bulbs, install only 12 volt bulbs with
the specified watt rating.
Correct headlamp adjustment is extremely important.
Check and readjust headlamps at regular intervals and
when a bulb has been replaced.
When replacing halogen bulbs do not touch glass
portion of bulb with bare hands. Use plain paper or a
clean cloth.
For adjusting headlamp aim see page 282.
Replacing bulbs
Warning!
Warning!
Do not remove the cover for the Xenon headlamp.
Because of high voltage in Xenon lamps, it is
dangerous to replace the bulb or repair the lamp
and its components. We recommend that you have
such work done by a qualified technician.
Bulbs and bulb holders can be very hot. Allow the
lamp to cool down before changing a bulb.
Halogen lamps contain pressurized gas. A bulb can
explode if you:
• touch or move it when hot,
• drop the bulb,
• scratch the bulb.
Wear eye and hand protection.
Exterior lamps
277
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
278
Car care
Index
Exterior lamps
Headlamp assembly (Halogen)
Headlamp assembly (Xenon) (optional)
4
4
1
1
6
6
5
5
7
7
2
2
3
3
P82.10-2394-26
P82.10-2395-26
1 Headlamp vertical adjustment screw
4 Bulb socket for turn signal lamp
2 Cover for low beam headlamp
5 Electrical connector for low beam headlamp bulb
6 Electrical connector for high beam headlamp bulb
7 Bulb socket for parking and standing lamp
3 Cover for high beam headlamp, parking and
standing lamp
Download from Www.Somanuals.com. All Manuals Search And Download.
Bulbs for low or high beam
H7 (55 W)
Turn signal lamp
1156 NA (26.9/5 W/32/4 cp bulb)
Open hood.
Open hood.
Rotate cover (2 or 3) counterclockwise and remove. Pull
off electrical connector (5 or 6). Unhook clamping ring
and remove bulb.
Twist bulb socket (4) counterclockwise and pull out.
Push bulb into socket, turn counterclockwise and
remove.
Insert new bulb (seating properly in cutouts of bulb
socket), mount clamping ring. Reinstall and push
electrical connector on securely.
Insert new bulb in socket, push in and twist clockwise.
Reinstall bulb socket. Reinstall lamp assembly until
properly seated.
Reinstall cover (2 or 3).
Parking and standing lamp
H 6W (6 W bulb)
Xenon (optional)
Bulb for low beam
Open hood.
Rotate cover (3) counterclockwise and remove.
Warning!
Twist bulb socket (7) counterclockwise and pull out.
Push bulb into socket, turn counterclockwise and
remove.
Do not remove the cover for the Xenon headlamp.
Because of high voltage in Xenon lamps, it is
dangerous to replace the bulb or repair the lamp
and its components. We recommend that you have
such work done by a qualified technician.
Insert new bulb in socket, push in and twist clockwise.
Reinstall bulb socket. Reinstall lamp assembly until
properly seated.
Reinstall cover (3).
Exterior lamps
279
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
280
Car care
Index
Exterior lamps
Taillamp assemblies
4
1
3
5
2
P82.10-2080-26
P82.10-2083-26
4 Driver’s side:
Open trunk lid.
Rear fog lamp (21 W/32 cp bulb)
Swing cover aside (bulbs 1, 2 and 3).
5 Backup lamp (21 W/32 cp bulb)
1 Turn signal lamp (21 W/24 cp bulb)
Twist bulb socket counterclockwise and pull out. Push
bulb into socket, turn counterclockwise and remove.
2 Stop, tail, parking, and side marker lamp
(21/4 W bulb)
Insert new bulb in socket, push in and twist clockwise.
Reinstall bulb socket. Close cover (bulbs 1, 2 and 3).
3 Tail and parking lamp (5 W/4 cp bulb)
Download from Www.Somanuals.com. All Manuals Search And Download.
Side marker lamp, front (5 W/4 cp bulb)
Carefully slide lamp towards front (arrow), and remove
back and first.
Twist bulb socket counterclockwise and pull out. Push
bulb socket, turn counterclockwise and remove.
Insert new bulb in socket, push in and twist clockwise.
Reinstall bulb socket, push in and twist clockwise.
To reinstall lamp, set front end of lamp in bumper and
let back end snap into place.
Exterior lamps
281
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
282
Car care
Index
Exterior lamps
High mounted stop lamp,
Adjusting headlamp aim
Additional turn signals on the exterior mirror
Correct headlamp adjustment is extremely important.
To check and readjust a headlamp, follow steps 1
through 5.
The high mounted stop lamp (3rd brake lamp), and the
additional turn signals on the exterior mirrors are
equipped with LEDs.
Please note:
Have the system checked at an authorized
Mercedes-Benz Center if a fault or defect occurs.
• Low beam adjustments simultaneously aim the high
beam.
• Vehicle should have a normal trunk load.
1. Park vehicle on level surface approximately 25 ft.
(7.6 m) from a vertical test screen or wall. The
centerline of the vehicle must be at a 90° angle to
the test screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
N82.10-2396-26
2. (Low beams on):
3. (Low beams off):
Using a carpenter’s level, align and mark a vertical
centerline (8) on the test screen using the vertex of
the angle formed in each beam image. As a check,
the distance between centerlines should be
49 1/4 inches (1250 mm). If the distance does not
check, have the system verified at an authorized
Mercedes-Benz Center.
Measure the vertical height from the floor to
reference point (10) on high beam lens. Subtract
approx. 2 inches (53 mm) from measurement, and
mark a horizontal centerline (9) on the test screen at
the resulting height from the floor. It must be at a
90° angle to the vertical centerline.
4. Open hood.
Exterior lamps
283
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
284
Car care
Index
Exterior lamps
5. Vertical headlamp aim (low beams on):
Turn adjusting screw (1) (counterclockwise to adjust
headlamp downward, clockwise upward) until the
headlamps illuminate the test screen as shown. The
vertex of the angle formed in each beam image
should align with the vertical and horizontal
centerlines (8 and 9).
The left and right headlamps must be adjusted
individually.
Note:
If it is not possible to obtain a proper headlamp
adjustment, have the system checked at your authorized
Mercedes-Benz Center.
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing batteries in the electronic key
2
1
3
4
P80.20-2201-26
P80.35-2029-26
1 Transmit buttons
Changing batteries
2 Lamp for battery check and function control
Move locking tab (3) in direction of right arrow and
remove mechanical key (4, left arrow).
Checking batteries
If one of the transmit buttons (1) is pressed, the battery
check lamp (2) lights up briefly – indicating that the
batteries are in order.
Change batteries if the battery check lamp (2) does not
light up briefly.
Electronic key
285
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
286
Car care
Index
Electronic key
7
8
5
4
6
P80.35-2025-26
P80.35-2027-26
Insert mechanical key (4) in side opening (5) to open
latch. Press briefly (do not use mechanical key as lever)
to release battery compartment.
Change batteries (7), inserting new ones under contact
spring (8) with plus (+) side facing up.
Return battery compartment into housing until locked
in place and slide mechanical key back into electronic
key.
Remove mechanical key from side opening.
Carefully remove battery compartment in direction of
arrow (6).
Download from Www.Somanuals.com. All Manuals Search And Download.
Important!
Synchronizing remote control
Batteries contain materials that can harm the
environment if disposed of improperly. Recycling of
batteries is the preferred method of disposal. For
disposal, please follow manufacturer’s recommendation
on battery package.
The remote control may have to be resynchronized, if
the vehicle cannot be locked or unlocked.
To synchronize insert electronic key in steering lock.
The remote control should once again be operational.
Replacement Battery:
Lithium, type CR 2025 or equivalent.
Electronic key
287
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
288
Car care
Index
Emergency operation of soft top
Raising soft top manually
Important!
In case of malfunction, the power soft top can also be
raised manually. This procedure should be performed
with great care by two persons.
Ensure that the trunk lid is closed while raising the soft
top manually. Otherwise there is the possibility of
contact between the trunk lid and the soft top
compartment cover.
We recommend to take off your watch or other jewelry to
prevent personal injury.
Warning!
A combination open-end/hex-socket wrench in the
vehicle tool kit is required for this job.
Do not place your hands near the roll bar, soft top
frame, upper windshield area or soft top storage
compartment or between the soft top rods while the
soft top is being raised and locked.
1. Engage parking brake.
2. Lower windows and open doors.
3. Lower roll bar with roll bar switch.
Note:
Serious personal injury may occur.
If the roll bar cannot be lowered, carefully guide the
soft top across the roll bar. Lift the rear window over
the roll bar.
4. For safety reasons, remove electronic key from
steering lock.
Download from Www.Somanuals.com. All Manuals Search And Download.
1
P65.10-2009-26
P77.30-2031-26
5. Unlock soft top storage compartment:
6. Place open-end wrench (1) (supplied in vehicle tool
kit) on bolt between backrest and soft top
compartment cover. Turn wrench (1) in direction of
arrow to its stop and remove.
Open trunk lid with mechanical key and lift
protection cover.
Using screwdriver (supplied in vehicle tool kit), turn
screw two turns counterclockwise.
Close trunk lid.
Important!
Do not place mechanical key inside trunk, since trunk is
locked again when closing the lid.
Emergency operation of soft top
289
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
290
Car care
Index
Emergency operation of soft top
2
4
3
P77.30-2034-26
P77.30-2029-26
7. Open soft top compartment cover (2) and place in
upright position.
8. Move soft top toward windshield header (arrow).
Warning!
Place hands from below on upper section of soft
top (3) and pull hard to move soft top (4) out of its
storage compartment.
Do not place your hands in areas marked X.
Serious personal injury may occur.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
4
5
2
1
P77.30-2030-26
P77.30-2033-26
9. Do not place soft top frame (5) onto windshield
header.
12. Lock soft top storage compartment:
Place open-end wrench (1) on bolt between backrest
and soft top compartment cover. Turn wrench (1) in
direction of arrow to its stop and remove.
10. Place rear window section of soft top (6) in its
vertical position.
11. Close soft top compartment cover (2) by placing
hands near edges (arrows). The soft top
compartment cover must lock in the first notch of
compartment cover catch.
Emergency operation of soft top
291
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
292
Car care
Index
Emergency operation of soft top
6
P77.30-2032-26
13. Lower rear window section of soft top (6).
15. Insert hex-socket wrench (7) to lock the soft top bow.
14. Open trunk lid with mechanical key and carefully
guide luggage cover (page 246) into its storage
compartment.
Press soft top bow down onto soft top compartment
cover.
Insert and turn wrench in direction of arrow (8) to
lock soft top bow.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
9
P65.10-2009-26
16. Using screwdriver (supplied in vehicle tool kit), turn
screw clockwise to the stop.
18. Press lock button (9) and fold down locking
handle (10).
17. Close trunk lid.
Important!
Do not place mechanical key inside trunk, since trunk is
locked again when closing the lid.
Emergency operation of soft top
293
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
294
Car care
Index
Emergency operation of soft top
19. Turn locking handle 90° clockwise and pull soft top
frame carefully down until it meets the windshield
header attachment points.
Turn locking handle counterclockwise to the stop to
lock the soft top.
Fold locking handle up until lock button engages.
Note:
Have the soft top operation checked at your authorized
Mercedes-Benz Center as soon as possible.
Download from Www.Somanuals.com. All Manuals Search And Download.
Antenna
Do not use tools (e.g. pliers) for the antenna mast
removal.
To remove:
Unscrew antenna counterclockwise (1).
To install:
Carefully position antenna mast on threaded socket and
turn clockwise (2) until hand tight.
The non-retractable antenna should be removed before
entering an automatic car wash, to avoid damage to the
antenna mast or vehicle paint finish.
Emergency operation of soft top
295
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
296
Car care
Index
Manual release for fuel filler flap
Manual release for fuel filler flap
Replacing wiper blade insert
For safety reasons, remove electronic key from steering
lock before replacing the wiper blade, otherwise the
motor can suddenly turn on and cause injury.
Notes:
Do not open engine hood with wiper arm folded forward.
Do not allow the wiper arm to contact the windshield
glass without a wiper blade inserted. The glass may be
scratched or broken.
Make certain that the wiper blade is properly installed.
An improperly installed wiper blade may cause
windshield damage.
P80.20-2051-26
The manual release knob is located behind the right
side trunk panel.
In case the central locking system does not release the
fuel filler flap, pull the manual release knob while
simultaneously opening the fuel filler flap.
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
3
P82.30-0333-26
Removal:
Installation:
Fold wiper arm forward. Press safety tab down (1), push
wiper blade downward (2) and remove.
Slide (direction of arrow) wiper blade insert into
retainer claws until tabs are engaged.
Place wiper blade on firm support. Press down both tabs
and slide (direction of arrow) the wiper blade insert out
of the retainer claws.
Insert wiper blade between tabs (3) on the wiper arm,
and slide into end of wiper arm. Press safety tab upward
until it locks in place.
Replacing wiper blade insert
297
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
298
Car care
Index
Replacing wiper blade insert
Download from Www.Somanuals.com. All Manuals Search And Download.
Wiper blade ................................ 303
Light alloy wheels .....................303
Vehicle care
Cleaning and care of the
Instrument cluster .....................304
Steering wheel and gear selector
lever ............................................. 304
Cup holder ..................................304
Seat belts ..................................... 304
Headliner ....................................304
Upholstery ..................................305
Hard plastic trim items ............. 305
Plastic and rubber parts ........... 305
Wind screen .............................. 305
Rubber weatherstrip ................305
Soft top ........................................306
vehicle ........................................300
Power washer ..............................301
Paintwork, painted body
components .................................301
Engine cleaning ..........................302
Tar stains .....................................302
Vehicle washing .........................302
Ornamental moldings ................302
Headlamps, taillamps, turn signal
lenses ...........................................303
Window cleaning ........................303
Plastic and rubber parts ............303
299
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
300
Car care
Index
Cleaning and care of the vehicle
Cleaning and care of the vehicle
More frequent washings are necessary to deal with
unfavorable conditions; for example, near the ocean, in
industrial areas (smoke, exhaust emissions), or during
winter operation.
Warning!
Many cleaning products can be hazardous. Some
are poisonous, others are flammable. Always follow
the instructions on the particular container.
Always open your vehicle’s doors or windows when
cleaning the inside.
You should check your vehicle from time to time for
stone chipping or other damage. Any damage should be
repaired as soon as possible to prevent the start of
corrosion.
Never use fluids or solvents that are not designed
for cleaning your vehicle.
In doing so, do not neglect the underside of the vehicle.
A prerequisite for a thorough check is a washing of the
underbody followed by a thorough inspection. Damaged
areas need to be reundercoated.
In operation, your vehicle is subjected to varying
external influences which, if gone unchecked, can
attack the paintwork as well as the underbody and
cause lasting damage.
Your vehicle has been treated at the factory with a wax-
base rustproofing in the body cavities which will last for
the lifetime of the vehicle. Post-production treatment is
neither necessary nor recommended by Mercedes-Benz
because of the possibility of incompatibility between
materials used in the production process and others
applied later.
Such damage is caused not only by extreme and varying
climatic conditions, but also by air polution, road salt,
tar, gravel and stone chipping. Grease and oil, fuel,
coolant, brake fluid, bird droppings, insects, tree resins
etc. should be removed immediately to avoid paint
damage. Frequent washing reduces and/or eliminates
the aggressiveness and potency of the above adverse
influences.
We have selected car-care products and compiled
recommendations which are specially matched to our
vehicles and which always reflect the latest technology.
You can obtain Mercedes-Benz approved car-care
products at your authorized Mercedes-Benz Center.
Download from Www.Somanuals.com. All Manuals Search And Download.
Scratches, corrosive deposits, corrosion or damage due
to negligent or incorrect care cannot always be removed
or repaired with the car-care products recommended
here. In such cases it is best to seek aid at your
authorized Mercedes-Benz Center.
Paintwork, painted body components
Mercedes-Benz approved Paint Care should be applied
when water drops on the paint surface do not “bead up”,
normally in 3 to 5 months, depending on climate and
washing detergent used.
The following topics deal with the cleaning and care of
your vehicle and give important “how-to” information as
well as references to Mercedes-Benz approved car-care
products.
Mercedes-Benz approved Paint Cleaner should be
applied if paint surface shows signs of dirt embedding
(i.e. loss of gloss).
Do not apply any of these products or wax if your
vehicle is parked in the sun or if the hood is still hot.
Additional information can be found in the booklet titled
“Vehicle Care Guide”.
Use the appropriate MB-Touch-Up Stick for quick and
provisional repairs of minor paint damage (i.e. chips
from stones, vehicle doors etc.).
Power washer
When using a power washer for cleaning the vehicle
always observe manufacturer’s operating instructions.
Caution!
Never use a round nozzle to power wash tires. The
intense jet of water can result in damage to the tire.
Always replace a damaged tire.
Always keep the jet of water moving across the surface.
Do not aim directly at soft top, electrical parts, electrical
connectors, seals, or other rubber parts.
Cleaning and care of the vehicle
301
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
302
Car care
Index
Cleaning and care of the vehicle
Engine cleaning
Vehicle washing
Prior to cleaning the engine compartment make sure to
protect electrical components and connectors from the
intrusion of water and cleaning agents.
Do not use hot water or wash your vehicle in direct
sunlight. Use only a mild car wash detergent, such as
Mercedes-Benz approved Car Shampoo.
Corrosion protection, such as MB Anticorrosion Wax
should be applied to the engine compartment after
every engine cleaning. Before applying, all control
linkage bushings and joints should be lubricated. The
poly-V-belt and all pulleys should be protected from any
wax.
Thoroughly spray the vehicle with a diffused jet of
water. Direct only a very weak spray towards the
ventilation intake. Use plenty of water and rinse the
sponge and chamois frequently.
Rinse with clear water and thoroughly wipe dry with a
chamois. Do not allow cleaning agents to dry on the
finish.
Tar stains
In the winter, thoroughly remove all traces of road salt
as soon as possible.
Quickly remove tar stains before they dry and become
more difficult to remove. A tar remover is
recommended.
When washing the underbody, do not forget to clean the
inner sides of the wheels.
Ornamental moldings
For regular cleaning and care of very dirty chrome-
plated parts, use a chrome cleaner.
Download from Www.Somanuals.com. All Manuals Search And Download.
Headlamps, taillamps, turn signal lenses
Wiper blade
Use a mild car wash detergent, such as Mercedes-Benz
approved Car Shampoo, with plenty of water.
Clean the wiper blade rubber with a clean cloth and
detergent solution.
To prevent scratches, never apply strong force and use
only a soft, non-scratchy cloth when cleaning the lenses.
Do not attempt to wipe dirty lenses with a dry cloth or
sponge.
Note:
For safety reasons, remove electronic key from steering
lock before cleaning the wiper blade, otherwise the
wiper motor can suddenly turn on and cause injury.
Window cleaning
Light alloy wheels
Use a window cleaning solution on all glass surfaces. An
automotive glass cleaner is recommended.
Mercedes-Benz approved Wheel Care should be used for
regular cleaning of the light alloy wheels.
Note:
If possible, clean wheels once a week with Mercedes-
Benz approved Wheel Care, using a soft bristle brush
and a strong spray of water.
For safety reasons, switch off wiper and remove
electronic key from steering lock before cleaning the
windshield, otherwise the wiper motor can suddenly
turn on and cause injury.
Follow instructions on container.
Note:
Plastic and rubber parts
Use only acid-free cleaning materials. The acid could
lead to corrosion.
Do not use oil or wax on these parts.
Cleaning and care of the vehicle
303
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
304
Car care
Index
Cleaning and care of the vehicle
Instrument cluster
Seat belts
Use a gentle dishwashing detergent or mild detergent
for delicate fabrics as a washing solution. Wipe with a
cloth moistened in lukewarm solution. Do not use
scouring agents.
The webbing must not be treated with chemical
cleaning agents. Use only clear, lukewarm water and
soap. Do not dry the webbing at temperatures above
176°F (80°C) or in direct sunlight.
Warning!
Steering wheel and gear selector lever
Do not bleach or dye seat belts as this may severely
weaken them. In a crash they may not be able to
provide adequate protection.
Wipe with a damp cloth and dry thoroughly or clean
with Mercedes-Benz approved Leather Care.
Cup holder
Headliner
Use a gentle dishwashing detergent or mild detergent
for delicate fabrics as a washing solution. Wipe with a
cloth moistened in lukewarm solution. Do not use
scouring agents.
Clean with soft bristle brush, or use a dry-shampoo
cleaner in case of excessive dirt.
Download from Www.Somanuals.com. All Manuals Search And Download.
Upholstery
Hard plastic trim items
Using aftermarket seat covers or wearing clothing that
have the tendency to give off coloring (e.g. when wet
etc.) may cause the upholstery to become permanently
discolored. By lining the seats with a proper
intermediate cover, contact-discoloration will be
prevented.
Pour Mercedes-Benz approved Interior Care onto soft
lint-free cloth and apply with light pressure.
Plastic and rubber parts
Do not use oil or wax on these parts.
Leather Upholstery
Wipe leather upholstery with a damp cloth and dry
thoroughly or clean with Mercedes-Benz approved
Leather Care. Exercise particular care when cleaning
perforated leather as its underside should not become
wet.
Wind screen
Use only water or mild detergent to clean the wind
screen.
Rubber weatherstrip
MB Tex Upholstery
Pour Mercedes-Benz approved Interior Care onto soft
lint-free cloth and apply with light pressure.
The door and windshield header rubber weatherstrip
material should be cared for at regular intervals with a
silicon-based car care product.
Cleaning and care of the vehicle
305
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
306
Car care
Index
Cleaning and care of the vehicle
Soft top
Notes:
When you run the vehicle through an automatic car
wash, never use hot-wax for conservation.
Clean soft top with soft top raised and locked. Lower the
soft top into the storage compartment only if the soft top
is completely dry. If the soft top is kept in the storage
compartment for a lengthy period, raise it and air out
with the windows open about every 4 months.
Depending on the operation mode of the car wash, there
is the possibility of water drops entering the vehicle’s
interior.
Never use a power washer to clean the soft top, as you
may damage the soft top material.
Dry cleaning:
Brush top (always from front to rear) with a soft-bristled
brush.
Remove bird droppings immediately. The organic acid
damages the material and causes the soft top to leak.
Wet cleaning:
In general, regular spraying or cleansing with clear
water is sufficient to keep the top clean.
Brush the dry top. Wash with a mild detergent and an
ample supply of lukewarm water by wiping with a soft-
bristled brush or sponge from front to rear. Then rinse
thoroughly with clear water.
Wash the top only when heavily soiled.
Light colored soft tops should be cleaned frequently to
prevent spots and dirt from setting in, which could stain
and discolor the soft top material permanently.
If only parts of the top have been washed, wet the entire
top and allow it to air-dry before lowering it into the
storage compartment.
Caution!
Do not use sharp-edged instruments for the removal of
ice and snow.
Never use any gasoline, thinner, tar and stain removers,
glass cleaner, or similar organic solvents to clean the
soft top or wind screen. They will cause damage which
is not covered by the Mercedes-Benz Limited Warranty.
Download from Www.Somanuals.com. All Manuals Search And Download.
Engine oil additives .......................318
Air conditioner refrigerant ...........318
Brake fluid .......................................318
Premium unleaded gasoline .........319
Fuel requirements .........................319
Gasoline additives ......................... 320
Coolants ..........................................320
Consumer information ................. 322
Technical data
Spare parts service ........................308
Warranty coverage .........................308
Identification labels .......................309
Layout of poly-V-belt drive ............ 310
Technical data ................................ 311
Fuels, coolants, lubricants etc. –
capacities ................................... 316
Engine oils ...................................... 318
307
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
308
Car care
Index
Technical data
Spare parts service
Warranty coverage
All authorized Mercedes-Benz Centers maintain a stock
of original spare parts required for maintenance and
repair work. In addition, strategically located parts
distribution centers provide quick and reliable parts
service.
Your vehicle is covered under the terms of the
“warranties” printed in the Service and Warranty
Information booklet and your authorized
Mercedes-Benz Center will exchange or repair any
defective parts originally installed on the vehicle in
accordance with the terms of the following warranties:
More than 300 000 different spare parts, for
Mercedes-Benz models, are available.
1. New vehicle limited warranty
2. Emission system warranty
3. Emission performance warranty
Mercedes-Benz original spare parts are subjected to
stringent quality inspections. Each part has been
specifically developed, manufactured or selected for and
adapted to Mercedes-Benz vehicles.
4. California, Maine, Massachusetts, and Vermont
emission control systems warranty
Therefore, Mercedes-Benz original spare parts should
be installed.
Replacement parts and accessories are covered by the
Mercedes-Benz Spare Parts and Accessories warranties,
copies of which are available at any Mercedes-Benz
Center.
Important!
The use of non-genuine parts and accessories not
authorized by Mercedes-Benz could damage the vehicle
which damage is not covered by the Mercedes-Benz
Limited Warranty or compromise its durability or safety.
Loss of Service and Warranty Information Booklet
Should you lose your Service and Warranty Information
booklet, have your authorized Mercedes-Benz Center
arrange for a replacement. It will be mailed to you.
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification labels
2
1 Certification label
2 Vehicle Identification Number (VIN)
When ordering spare parts, please specify vehicle
identification and engine numbers.
Technical data
309
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
310
Car care
Index
Technical data
Layout of poly-V-belt drive
1 Automatic belt tensioner
2 Crankshaft
CLK 320 shown
3 VIN, visible (lower edge of windshield)
4 Engine number
3 Air conditioner compressor
4 Coolant pump
5 Body number and paintwork number
6 Emission control label
5 Generator (alternator)
6 Idler pulley
7 Information label, California version
7 Power steering pump
Vacuum line routing for emission control system
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical data
Model
CLK 320 (208 465)1
CLK 430 (208 470)1
Engine
112
113
Mode of operation
4-stroke engine,
gasoline injection
4-stroke engine,
gasoline injection
No. of cylinders
Bore
6
8
3.54 in (89.90 mm)
3.31 in (84.00 mm)
195.2 cu.in. (3199 cm3)
10:1
3.54 in (89.90 mm)
3.31 in (84.00 mm)
260.3 cu.in. (4265 cm3)
10:1
Stroke
Total piston displacement
Compression ratio
Output acc. to SAE J 1349
215 hp/5700 rpm
275 hp/5750 rpm
(160 kW/5700 rpm)
(205 kW/5750 rpm)
Maximum torque acc. to SAE J 1349
232 ft.lb/3000 rpm
(315 Nm/3000 rpm)
295 ft.lb/3200 rpm
(400 Nm/3200 rpm)
Maximum engine speed
Firing order
6000 rpm
1-4-3-6-2-5
2390 mm
6000 rpm
1-5-4-2-6-3-7-8
2390 mm
Poly-V-belt
1
The quoted data apply only to the standard vehicle. See an authorized Mercedes-Benz Center for the corresponding data of all special bodies
and special equipment.
Technical data
311
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
312
Car care
Index
Technical data
Rims – Tires (except Sport Package)
Rims – Tires (Sport Package)
Model
CLK 320
Model
CLK 320
Rims (light alloy)
Wheel offset
7 J x 16 H 2
1.46 in (37 mm)
Rims front axle
(AMG light alloy)
Wheel offset
71/2 J x 17 H 2
1.46 in (37 mm)
All season tires:
Radial-ply tires
205/55 R 16 91 H
205/55 R 16 91 H M+S
Rims rear axle
(AMG light alloy)
Wheel offset
81/2 J x 17 H 2
1.18 in (30 mm)
Winter tires:
Radial-ply tires
Radial-ply tires
Summer tires, front axle: 225/45 R 17 91 W1, 4
Summer tires, rear axle:
245/40 R 17 91 W2, 3, 5
Spare wheel
Rim (steel)
Wheel offset:
7 J x 16 H 2
1.46 in (37 mm)
Spare wheel
Rim (steel)
Wheel offset:
7 J x 16 H 2
1.46 in (37 mm)
All season tire:
Radial-ply tire
205/55 R 16 91 H
All season tire:
Radial-ply tire
205/55 R 16 91 H
1
2
3
4
Also permissible 225/45 ZR 17.
Also permissible 245/40 ZR 17.3
Must not be used with snow chains.
Also permissible 225/45 ZR 17 91 Y.
5
Also permissible 245/40 ZR 17 91 Y.3
Download from Www.Somanuals.com. All Manuals Search And Download.
Model
CLK 430
Rims front axle
(AMG light alloy)
Wheel offset:
71/2 J x 17 H 2
1.46 in (37 mm)
Rims rear axle
(AMG light alloy)
Wheel offset:
81/2 J x 17 H 2
1.18 in (30 mm)
Radial-ply tires:
summer tires, front axle
summer tires, rear axle
225/45 R 17 91 W1
245/40 R 17 91 W2, 3, 4
Spare wheel
Rim (light alloy)
Wheel offset:
71/2 J x 17 H 2
1.46 in (37 mm)
Summer tire:
Radial-ply tire
225/45 R 17 91 W1
1
2
3
Also permissible 225/45 ZR 17
Also permissible 245/40 ZR 173
4
Also permissible 245/40 ZR 17 91 Y.3
Must not be used with snow chains.
Technical data
313
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
314
Car care
Index
Technical data
Rims – Winter tires
Model
CLK 430
Rim (light alloy)
Wheel offset
71/2 J x 17 H 2
1.46 in (37 mm)
Winter tires:
Radial-ply tires
225/45 R 17 91 H M+S
Electrical system
Model
CLK 320
CLK 430
Generator (alternator)
Starter motor
Battery
14 V/115 A
12V/1.7 kW
12V/100 Ah
14 V/150 A
12V/1.7 kW
12V/100 Ah
Bosch F 8 DPER
Spark plugs
Bosch F 8 DPER
Beru 14 FGH 8 DPUR X 2
NGK PFR 5 R-11
0.039 in (1.0 mm)
Beru 14 FGH 8 DPUR X 2
NGK PFR 5 R-11
0.039 in (1.0 mm)
Electrode gap
Tightening torque
15 – 22 ft.lb (20 – 30 Nm)
15 – 22 ft.lb (20 – 30 Nm)
Download from Www.Somanuals.com. All Manuals Search And Download.
Weights (see certification tag)
Trunk load max.
220 lb (100 kg)
Main dimensions
Model
CLK 320
CLK 430
Overall vehicle length
Overall vehicle width
Overall height
Wheel base
179.8 in (4567 mm) 179.8 in (4567 mm)
67.8 in (1722 mm)
54.3 in (1380 mm)
67.8 in (1722 mm)
54.3 in (1380 mm)
105.9 in (2690 mm) 105.9 in (2690 mm)
Track, front
59.3 in (1505 mm)
58.0 in (1474 mm)
59.3 in (1505 mm)
58.6 in (1488 mm)
Track, rear
Technical data
315
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
316
Car care
Index
Fuels, coolants, lubricants etc. - capacities
Fuels, coolants, lubricants etc. – capacities
Vehicle components and their respective lubricants must match. Therefore use only brands tested and recommended
by us. Please refer to the Factory Approved Service Products pamphlet, or inquire at your Mercedes-Benz Center.
Fuels, coolants, lubricants etc.
Model
Capacity
Engine with oil filter
CLK 320, CLK 430
8.5 US qt (8.0 l)
(recommended engine oils)
Automatic transmission
CLK 320
CLK 430
8.5 US qt (8.0 l)
9.6 US qt (9.1 l)
(automatic transmission fluid)1
Rear axle
1.4 US qt (1.3 l)
(Hypoid gear oil SAE 90, 85 W 90)
Power steering
(MB Power steering fluid)
approx. 1.1 US qt (1.0 l)
approx. 2.1 oz (60 g) each
approx. 0.5 US qt (0.5 l)
Front wheel hubs
(high temperature roller bearing grease)
Brake system
(MB Brake fluid (DOT 4))
Cooling system
(MB 325.0 Anticorrosion/Antifreeze Agent)
CLK 320
CLK 430
approx. 9.5 US qt (9.0 l)
approx. 11.7 US qt (11.1 l)
1
MB part no. 001 989 21 03 10.
Download from Www.Somanuals.com. All Manuals Search And Download.
Fuels, coolants, lubricants etc.
Model
Capacity
Windshield washer system
approx. 7.4 US qt (7.0 l)
(MB Windshield washer concentrate “S” 1)
Fuel tank
including a reserve of
approx. 16.4 US gal (62.0 l)
approx. 2.1 US gal (8.0 l)
(Premium unleaded gasoline:
Posted Octane 91 (Avg. of 96 RON/86 MON))
Air conditioner system
(R-134a refrigerant and special
PAC lubricant (Never R-12))
1
Use MB Windshield Washer Concentrate “S” and water for temperatures above freezing or MB Windshield Washer Concentrate “S” and
commercially available premixed windshield washer solvent/antifreeze for temperatures below freezing. Follow suggested mixing ratios, see
page 255.
Fuels, coolants, lubricants etc. - capacities
Instruments
317
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
and controls
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
318
Car care
Index
Fuels, coolants, lubricants etc.
Engine oils
Air conditioner refrigerant
R-134a (HFC) refrigerant and special PAG lubricating oil
is used in the air conditioner system.
Engine oils are specifically tested for their suitability in
our engines. Therefore, use only engine oils
recommended by Mercedes-Benz. Information on
recommended brands is available in the Factory
Approved Service Products pamphlet or at your
authorized Mercedes-Benz Center.
Never use R-12 (CFC) or mineral-based lubricating oil,
otherwise damage to the system will occur.
Brake fluid
Please follow Service Booklet recommendations for
scheduled oil changes. Failure to do so could result in
engine damage not covered by the Mercedes-Benz
Limited Warranty.
During vehicle operation, the boiling point of the brake
fluid is continuously reduced through the absorption of
moisture from the atmosphere. Under extremely hard
operating conditions, this moisture content can lead to
the formation of bubbles in the system thus reducing
the system’s efficiency.
Engine oil additives
Do not blend oil additives with engine oil. They may be
harmful to the engine operation.
The brake fluid must therefore be replaced every two
years, preferably in the spring.
Damage or malfunctions resulting from blending oil
additives are not covered by the Mercedes-Benz Limited
Warranty.
It is recommended to use only brake fluid approved by
Mercedes-Benz. Your authorized Mercedes-Benz Center
will provide you with additional information.
Download from Www.Somanuals.com. All Manuals Search And Download.
Premium unleaded gasoline
Caution!
Fuel requirements
Use only Premium unleaded meeting ASTM
standard D 439:
To maintain the engine’s durability and performance,
premium unleaded gasoline must be used. If premium
unleaded is not available and low octane fuel is used,
follow these precautions:
The octane number (posted at the pump) must be
91 min. It is an average of both the Research (R) octane
number and the Motor (M) octane number: [(R+M)/2].
This is also known as ANTI-KNOCK INDEX.
• Have the fuel tank filled only partially with
unleaded regular and fill up with premium
unleaded as soon as possible.
Unleaded gasoline containing oxygenates such as
Ethanol, IPA, IBA and TBA can be used provided the
ratio of any one of these oxygenates to gasoline does not
exceed 10%, MTBE not to exceed 15%.
• Avoid full throttle driving and abrupt acceleration.
The ratio of Methanol to gasoline must not exceed 3%
plus additional cosolvents.
• Do not exceed an engine speed of 3000 rpm, if the
vehicle is loaded with a light load such as two
persons and no luggage.
Using mixtures of Ethanol and Methanol is not allowed.
Gasohol, which contains 10% Ethanol and 90% unleaded
gasoline, can be used.
• Do not exceed 2/3 of maximum accelerator pedal
position, if the vehicle is fully loaded or operating in
mountainous terrain.
These blends must also meet all other fuel requirements
such as resistance to spark knock, boiling range, vapor
pressure etc..
Fuels, coolants, lubricants etc.
319
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
320
Car care
Index
Fuels, coolants, lubricants etc.
Gasoline additives
Coolants
A major concern among engine manufacturers is carbon
build up caused by gasoline. Mercedes-Benz
The engine coolant is a mixture of water and
anticorrosion/antifreeze, which provides:
recommends the use of only quality gasoline containing
additives that prevent the build up of carbon deposits.
• Corrosion protection
• Freeze protection
After an extended period of using fuels without such
additives, carbon deposits can build up especially on the
intake valves and in the combustion area, leading to
engine performance problems such as:
• Boiling protection (by increasing the boiling point)
The cooling system was filled at the factory with a
coolant providing freeze protection to approximately
-22°F (-30°C) and corrosion protection.
• Warm-up hesitation
• Unstable idle
• Knocking/pinging
• Misfire
If the antifreeze mixture is effective to -22°F (-30°C), the
boiling point of the coolant in the pressurized cooling
system is reached at approximately 266°F (130°C).
The coolant solution must be used year-round to provide
the necessary corrosion protection and increase boil-
over protection. You should have it replaced every 15
years or 150 000 miles (250 000 km), whichever comes
first. Coolant system design and coolant used stipulate
the replacement interval. The above replacement
interval is only applicable if MB 325.0 anticorrosion/
antifreeze solution or other Mercedes-Benz approved
products of equal specification (see Factory Approved
Service Products pamphlet) are used to renew the
coolant concentration or bring it back up to the proper
level.
• Power loss
Do not blend other specific fuel additives with fuel.
They only result in unnecessary cost, and may be
harmful to the engine operation.
Damage or malfunctions resulting from poor fuel
quality or from blending specific fuel additives are not
covered by the Mercedes-Benz Limited Warranty.
Download from Www.Somanuals.com. All Manuals Search And Download.
To provide the important corrosion protection, the
solution must be at least 45% anticorrosion/antifreeze
(equals a freeze protection to approx. - 22°F [-30°C]). If
you use a solution that is more than 55% anticorrosion/
antifreeze (freeze protection to approx. - 49°F [-45°C]),
the engine temperature will increase due to the lower
heat transfer capability of the solution. Therefore, do not
use more than this amount of anticorrosion/antifreeze.
aluminum parts. (Failure to use such anticorrosion/
antifreeze coolant will result in a significantly
shortened service life.)
Therefore the following product is strongly
recommended for use in your vehicle: Mercedes-Benz
325.0 Anticorrosion/Antifreeze Agent.
Before the start of the winter season (or once a year in
the hot southern regions), you should have the
anticorrosion/antifreeze concentration checked. The
coolant is also regularly checked each time you bring
your vehicle to your authorized Mercedes-Benz Center
for service.
If the coolant level is low, water and MB 325.0
anticorrosion/ antifreeze should be used to bring it up
to the proper level (have cooling system checked for
signs of leakage).
Please make sure that the mixture is in accordance with
label instructions.
Anticorrosion/antifreeze quantity
The water in the cooling system must meet minimum
requirements, which are usually satisfied by normal
drinking water. If your are not sure about the water
quality, consult your authorized Mercedes-Benz Center.
Model
Approx. freeze protection
-35°F
-49°F (
-45°C)
(-37°C)
Anticorrosion/antifreeze
CLK 320
CLK 430
4.8 US qt
(4.5 l)
5.3 US qt
(5.0 l)
Your vehicle contains a number of aluminum parts. The
use of aluminum components in motor vehicle engines
necessitates that anticorrosion/antifreeze coolant used
in such engines be specifically formulated to protect the
5.9 US qt
6.5 US qt
Fuels, coolants, lubricants etc.
321
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
322
Car care
Index
Consumer information
Consumer information
may depart significantly from the norm due to
variations in driving habits, service practices and
differences in road characteristics and climate.
This has been prepared as required of all manufactures
of passenger cars under Title 49, Code of U.S. Federal
Regulations, Part 575 pursuant to the “National Traffic
and Motor Vehicle Safety Act of 1966”.
Traction
The traction grades, from highest to lowest are AA, A, B,
and C. Those grades represent the tire’s ability to stop
on wet pavement as measured under controlled
conditions on specified government test surfaces of
asphalt and concrete. A tire marked C may have poor
traction performance.
Uniform tire quality grading
Quality grades can be found where applicable on the
tire sidewall between tread shoulder and maximum
section width. For example:
Warning!
Tread wear 200 Traction AA
Temperature A
The traction grade assigned to this tire is based on
straightahead braking traction tests, and does not
include acceleration, cornering, hydroplaning, or
peak traction characteristics.
All passenger vehicle tires must conform to federal
safety requirements in addition to these grades.
Treadwear
The treadwear grade is a comparative rating based on
the wear rate of the tire when tested under controlled
conditions on a specified government test course. For
example, a tire graded 150 would wear one and one-half
(1 1/2) times as well on the government course as a tire
graded 100. The relative performance of tires depends
upon the actual conditions of their use, however, and
Download from Www.Somanuals.com. All Manuals Search And Download.
Temperature
The temperature grades are A (the highest), B, and C,
representing the tire’s resistance to the generation of
heat and its ability to dissipate heat when tested under
controlled conditions on a specified indoor laboratory
test wheel. Sustained high temperature can cause the
material of the tire to degenerate and reduce tire life,
and excessive temperature can lead to sudden tire
failure. The grade C corresponds to a level of
performance which all passenger vehicle tires must
meet under the Federal Motor Vehicle Safety Standard
No. 109. Grades B and A represent higher levels of
performance on the laboratory test wheel than the
minimum required by law.
Warning!
The temperature grade for this tire is established
for a tire that is properly inflated and not
overloaded. Excessive speed, underinflation, or
excessive loading, either separately or in
combination, can cause excessive heat build up
and possible tire failure.
Consumer information
323
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
324
Car care
Index
Index
Armrest, rear bench .......................................................152
Ashtray
Index
Center console, front ................................................150
Audio system ..................................................................123
Anti-theft system....................................................... 125
Button and soft key operation................................. 126
Cassette mode............................................................ 131
CD changer .................................................................136
CD mode .....................................................................135
Operating and display elements .............................124
Operating safety........................................................ 123
Operation ....................................................................127
Operation – audio and telephone ........................... 123
Radio mode ................................................................129
Telephone operation .................................................139
Audio systems ...................................................................89
Cassette player ............................................................91
CD player ......................................................................90
Radio ............................................................................. 89
Automatic central locking .............................................. 34
Automatic climate control ............................................ 116
Air distribution.......................................................... 120
Air recirculation ........................................................121
Air volume.................................................................. 120
Basic setting............................................................... 118
Defogging windows ................................................... 119
A
ABS (Antilock brake system) ....................................... 214
Malfunction indicator lamp..................................... 227
ABS-SYSTEM - malfunction and
warning messages ......................................................... 233
Adjusting headlamp aim............................................... 282
Adjusting telescoping steering column ........................73
Air conditioner refrigerant............................................ 318
Air distribution ..............................................................120
Air volume ......................................................................120
Airbag deactivation system............................................ 59
Airbag OFF indicator lamp........................................... 228
Airbags .............................................................................. 61
Alarm system ............................................................. 39, 40
Antenna
Removal ......................................................................295
Anticorrosion/antifreeze ....................208, 254, 316, 321
Antiglare night position.................................................. 74
Antilock brake system (ABS) ....................................... 214
Malfunction indicator lamp..................................... 227
Antitheft alarm system ................................................... 39
Aquaplaning ...................................................................205
Download from Www.Somanuals.com. All Manuals Search And Download.
Defrosting.................................................................... 119
Display and controls ..................................................118
Dust filter ................................................................... 122
Economy...................................................................... 119
Rear window defroster ............................................. 120
Residual engine heat utilization (REST) ............... 121
Special settings .......................................................... 119
Automatic transmission................................................ 191
Emergency operation ............................................... 199
Fluid level................................................................... 253
Program mode selector switch................................ 198
Selector lever position.............................................. 194
Transmission selector lever,
BATTERY/ALTERNATOR - malfunction and warning
messages ................................................................... 232
Block heater ................................................................... 209
BRAKE ASSIST - malfunction and
warning messages ........................................................ 233
Brake assist system (BAS) .............................................212
Malfunction indicator lamp.................................... 227
Brake fluid...................................................... 225, 316, 318
Capacity...................................................................... 316
BRAKE FLUID - malfunction and
warning messages ........................................................ 234
BRAKE LINING WEAR - malfunction and
warning messages ........................................................ 234
Brake pad wear.............................................................. 234
Brake warning lamp ..................................................... 225
Brake fluid low ......................................................... 225
Brakes .................................................... 200, 202, 212, 216
Bulbs
manually unlocking.................................................. 276
B
BabySmartTM airbag deactivation system..................... 59
Self-test......................................................................... 59
Backrest, front seat.......................................................... 49
BAS (Brake assist system)............................................ 212
Malfunction indicator lamp..................................... 227
Battery ............................................................................. 270
Battery recycling....................................................... 271
See Replacing bulbs................................................. 277
Index
325
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
326
Car care
Index
Index
Child restraint .............................................. 53, 58, 59, 69
Child seat
C
Capacities
See Infant and child restraint systems .................... 69
Cleaning and care of the vehicle ................................ 300
Clock, setting.................................................................. 102
COMAND, radio and telephone.................................... 174
Combination switch ....................................................... 113
Consumer information................................................. 322
Control and operation of radio transmitters.............. 174
Fuels, coolants, lubricants etc. ............................... 316
Cargo tie-down rings..................................................... 152
Catalytic converter......................................................... 176
CD changer
See Audio system...................................................... 136
Cellular telephone ......................................................... 153
Center console.................................................................. 18
Central locking switch.................................................... 33
Central locking system ................................................... 25
Automatic central locking ......................................... 34
Choosing global or selective mode........................... 28
Electronic key.............................................................. 23
Locking and unlocking............................................... 27
Mechanical keys...........................................................30
Remote control ............................................................ 25
Changing wheels ........................................................... 263
CHECK ENGINE malfunction indicator lamp............ 224
Check regularly and before a long trip ...................... 222
Checking engine oil level
COOLANT (coolant level) - malfunction and warning
messages ................................................................... 236
Coolant level
Adding coolant.......................................................... 254
Checking .................................................................... 253
COOLANT TEMP. (coolant temperature) - malfunction
and warning messages............................................ 237
Coolant temperature gauge ............................................ 82
Coolants .......................................................................... 320
Anticorrosion/antifreeze quantity ........................ 320
Cruise control .................................................................210
Cup holder
Center console, front ................................................149
Via engine oil level indicator .................................. 108
Via oil dipstick........................................................... 252
Download from Www.Somanuals.com. All Manuals Search And Download.
Malfunction indicator lamp.................................... 227
Synchronizing............................................................ 217
Warning lamp ........................................................... 227
Emergency call
See Tele Aid................................................................ 179
Emergency tensioning device (ETD)............................. 60
Emergency trunk lid release button ............................. 38
Emergency unlocking in case of accident.................... 34
Emission control ............................................................ 177
Emission control label ................................................... 310
Engine compartment .................................................... 250
ENGINE FAN - malfunction and
warning messages ........................................................ 235
Engine malfunction
CHECK ENGINE malfunction indicator lamp ...... 224
Engine oil additives ....................................................... 318
Engine oil consumption ................................................109
Engine oil level
D
Daytime running lamps .................................................111
Standing water
Driving instructions ................................................. 209
DISPLAY DEFECTIVE (engine control unit) -
malfunction and warning messages...................... 231
DISPLAY DEFECTIVE (several systems) - malfunction
and warning messages ............................................231
Display illumination ........................................................ 81
Doors .................................................................................. 31
Drinking and driving .................................................... 201
Drive sensibly - save fuel.............................................. 201
Driving instructions .......................................................201
Driving off .......................................................................203
E
ELEC. STABIL. PROG. - malfunction and warning
messages.................................................................... 241
Electronic key................................................................... 23
Changing batteries ................................................... 285
Synchronizing remote control ................................ 287
Electronic stability program (ESP)
Checking............................................................ 108, 252
Warning ..................................................................... 240
ENGINE OIL LEVEL - malfunction and warning
messages ................................................................... 240
Engine oil level indicator ..............................................108
ENGINE OIL LEVEL NOT WHEN ENGINE ON
Control switch ........................................................... 218
Malfunction and warning messages...................... 241
(measuring) - multifunction indicator................... 109
Engine oils....................................................................... 318
Index
327
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
328
Car care
Index
Index
Capacities................................................................... 316
ESP (Electronic stability program).... 207, 208, 216, 276
Control switch ........................................................... 218
Malfunction and warning messages...................... 241
Malfunction indicator lamp..................................... 227
Synchronizing ........................................................... 217
Warning lamp............................................................ 227
Express opening and closing
F
First aid kit..................................................................... 246
Flat tire
See changing wheels ............................................... 263
Flexible service system (FSS) ...................................... 105
Fuel
Gasoline additives.................................................... 320
Premium unleaded gasoline.................... 176, 317, 319
Fuel cap placement warning....................................... 226
Fuel filler flap
Manual release ......................................................... 296
Fuel requirements ......................................................... 319
Fuel reserve warning .................................................... 226
Fuels, coolants, lubricants etc. - capacities ............... 316
Fuse box ......................................................................... 248
Fuses, electrical ............................................................. 248
See Power windows .................................................. 143
Exterior lamp malfunction and
warning message.......................................................... 238
Exterior lamp switch ......................................................110
Exterior lamps ................................................................277
Adjusting headlamp aim.......................................... 282
Fog lamps ....................................................................110
Headlamps ..................... 110, 238, 239, 278, 282, 303
Low and high beam .......................................... 113, 279
Parking lamps ................................................... 110, 279
Replacing bulbs......................................................... 277
Side marker lamp, front........................................... 281
Standing lamps.................................................. 110, 279
Taillamp assemblies .................................................280
Turn signal lamp............................................... 113, 279
G
Garage door opener .......................................................154
Gasoline
Additives .................................................................... 320
Fuel requirements .................................................... 319
Premium unleaded.................................................... 319
Download from Www.Somanuals.com. All Manuals Search And Download.
General notes on the central locking system ..............24
Global locking
Infant and child restraint systems ................................ 69
Information call
See Central locking system .......................................27
Glove box .........................................................................147
See Tele Aid ...............................................................183
Instrument cluster ...........................................................78
Activating display ....................................................... 81
Indicator lamps............................................................ 80
Instrument lamps .............................................................81
Instruments and controls ............................................... 16
Interior
H
Hazard warning flasher switch ....................................115
Head restraints
General notes............................................................. 147
Interior lighting ..............................................................145
Front.............................................................................. 46
Rear............................................................................... 47
Removal ........................................................................46
Headlamp cleaning system ...........................................112
Headlights ........................................................................110
Heated seats...................................................................... 51
High beams
J
Jump starting ..................................................................271
See Combination switch ........................................... 113
Hood................................................................................. 250
K
Keys, changing battery ................................................. 285
Keys, vehicle .....................................................................22
I
Identification labels....................................................... 309
Illuminated vanity mirrors ........................................... 146
Indicator lamps in the instrument cluster ...................80
Individual settings......................................................... 102
Index
329
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
330
Car care
Index
Index
L
M
Lamps, exterior
Maintenance ................................................................... 175
Malfunction and indicator lamps in the
Fog lamps ....................................................................110
Headlamp, adjusting ................................................282
Headlamps .....................110, 238, 239, 278, 282, 303
Low and high beam .......................................... 113, 279
Parking lamps ...................................................110, 279
Replacing bulbs......................................................... 277
Side marker lamp, front ...........................................281
Standing lamps ..................................................110, 279
Taillamp assemblies .........................................110, 280
Turn signal lamps .............................................113, 279
Layout of poly-V-belt drive ............................................ 310
LIGHT SENSOR - malfunction and
warning messages.........................................................239
Lighter ............................................................................. 151
LIGHTING SYSTEM - malfunction and
warning messages .........................................................238
Limp home mode (Automatic transmission) ............. 199
Locking and unlocking ................................................... 27
Low beams
instrument cluster ....................................................... 224
Malfunction and warning messages .......................... 230
ABS-SYSTEM............................................................. 233
BATTERY/ALTERNATOR......................................... 232
BRAKE ASSIST ......................................................... 233
BRAKE FLUID........................................................... 234
BRAKE LINING WEAR ............................................ 234
COOLANT (coolant level) ........................................ 236
COOLANT TEMP. (coolant temperature) .............. 237
DISPLAY DEFECTIVE (engine control unit) .........231
DISPLAY DEFECTIVE (several systems) ................231
ELEC. STABIL. PROG. ...............................................241
ENGINE FAN ............................................................. 235
ENGINE OIL LEVEL ................................................. 240
LIGHT SENSOR ......................................................... 239
LIGHTING SYSTEM .................................................. 238
PARKING BRAKE ..................................................... 235
REMOVE KEY ............................................................241
STEER. WHEEL ADJUST. ......................................... 239
TELE AID ................................................................... 243
WASHER FLUID ........................................................ 242
Malfunction/warning message memory ....................100
See Exterior lamps.................................................... 277
Low engine coolant level warning............................... 236
Luggage cover .................................................................246
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual operation of soft top ........................................288
Mechanical keys ........................................................ 23, 30
Memory
Operator’s Manual .............................................................7
Outside temperature indicator .......................................82
Overhead control panel................................................... 19
Recalling .................................................................44, 76
Storing .......................................................................... 43
Mirror, exterior, adjusting.............................................. 75
Mirror, exterior, rear view ..............................................75
Mirror, inside, rear view ................................................. 74
Multicontour seat ............................................................50
Multifunction display ......................................................84
Engine oil level indicator........................................... 88
FSS (Flexible service system) ................................... 88
Setting the audio volume .........................................104
Trip and main odometer ............................................88
Vehicle speed ...............................................................88
Multifunction steering wheel ........................................ 84
P
Panic button ......................................................................30
Parcel net in front passenger footwell ........................152
Parking ........................................................................... 204
Parking brake .....................150, 190, 200, 204, 225, 263
PARKING BRAKE - malfunction and
warning messages ........................................................ 235
Power assistance ........................................................... 202
Power seats, front............................................................. 41
Backres ....................................................................... t 49
Power windows ...............................................................142
Express opening and closing .................................. 143
Opening and closing ...................................................29
Operated with soft top switch ................................. 144
Synchronizing............................................................ 143
Problems with your vehicle ............................................ 13
Product information........................................................... 6
N
Navigation system - Multifunction display ..................97
Night security illumination............................................111
O
On-board diagnostic system......................................... 224
Index
331
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
332
Car care
Index
Index
Vertical ........................................................................ 171
R
Radio
S
See Audio ...................................................................129
Radio transmitters ......................................................... 174
Rain sensor ......................................................................114
Rear view mirrors
Safety guidelines for the seat belt, emergency
tensioning device and airbag ....................................67
Seat belts ........................................................................... 53
Fastening ......................................................................55
Seat belt nonusage warning system......................... 54
Unfastening.................................................................. 56
Warning lamp ........................................................... 228
Seat belts and supplemental
Exterior......................................................................... 75
Inside ............................................................................ 74
Rear window defroster.................................................. 120
Remote control ................................................................. 25
Battery replacement................................................. 285
REMOVE KEY - malfunction and
warning messages ......................................................... 241
Replacing bulbs ..............................................................277
Replacing wiper blade insert....................................... 296
Reporting Safety Defects ................................................ 14
Residual engine heat utilization (REST) .................... 121
Roadside assistance........................................................... 9
Roadside assistance call
restraint system (SRS).................................................... 52
Seats
Backrest........................................................................ 49
Front seat adjustment ................................................ 41
Heated........................................................................... 51
Memory ........................................................................43
Multicontour ................................................................ 50
Power seat .................................................................... 41
Selective locking
See Central locking system ....................................... 27
Service indicator
See Flexible service system (FSS) ..........................105
Setting the audio volume ..............................................104
See Tele Aid ............................................................... 182
Roll bar
Switch ...........................................................................47
Warning lamp............................................................ 229
Roller blind
Horizontal .................................................................. 170
Download from Www.Somanuals.com. All Manuals Search And Download.
Shelf below rear window ..............................................246
Side marker lamp ..........................................................281
Snow chains ....................................................................207
Soft top ............................................................................ 158
Emergency operation ...............................................288
Lowering ..................................................................... 160
Raising ........................................................................ 162
SOS-call
Storage compartments, armrest and cup holder .......147
Stowing things in the vehicle...................................... 246
Sun visors ........................................................................146
Supplemental restraint system (SRS)........................... 60
Synchronizing remote control .................................... 287
T
See Tele Aid ............................................................... 178
Spare parts service ........................................................308
Spare wheel ........................................................... 256, 260
Spare wheel bolts ..........................................................260
Special settings (Automatic climate control) ............. 119
SRS indicator lamp........................................................ 226
SRS malfunction .............................................................. 62
Start lock-out..................................................................... 24
Starting and turning off the engine............................ 190
STEER. WHEEL ADJUST. - malfunction and
warning messages........................................................ 239
Steering column, adjustable ...........................................73
Steering lock................................................................... 188
Storage compartment
Trunk floor................................................................. 256
Storage compartments
Tachometer ........................................................................83
Technical data................................................................. 311
Electrical system .......................................................314
Main dimensions ......................................................315
Rims and tires ........................................................... 312
Weights....................................................................... 315
Tele Aid ............................................................................178
Emergency calls ........................................................179
Information ................................................................183
Initiating an emergency call manually .................. 181
Roadside Assistance .................................................182
TELE AID - malfunction and
warning messages ........................................................ 243
Telephone ..........................................................................92
General notes .............................................................153
Incoming call ............................................................... 96
Redialing....................................................................... 94
Center console ...........................................................148
Glove box.................................................................... 147
Index
333
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
334
Car care
Index
Index
Telephone book ...........................................................92
Telephones and two-way radios................................... 174
Telescoping steering column
Trip and main odometer and sub menu .......................88
Trip computer ................................................................... 98
Trip odometer ................................................................... 83
Trunk .................................................................................35
Opening ........................................................................ 28
Release switch ............................................................. 37
Trunk lamp........................................................................ 36
Trunk lid
Emergency release...................................................... 38
Release switch ............................................................. 37
Turn signal failure ......................................................... 113
Turn signals .................................................................... 113
Adjusting...................................................................... 73
Indicator lamp ...........................................................228
Telescoping steering column - malfunction and
warning messages .........................................................239
The first 1 000 miles .....................................................175
Tire inflation pressure ..................................................268
Tire speed rating ............................................................206
Tire traction ....................................................................206
Tires .................................................................................322
Driving instructions .................................................204
Rims and tires ........................................................... 312
Rotating wheels......................................................... 259
Tire inflation pressure .............................................268
Tire replacement .......................................................258
Winter driving instructions......................................207
Tool kit
V
Vanity mirrors ................................................................146
Vehicle jack .................................................................... 257
Vehicle tools ................................................................... 256
See Vehicle tools .......................................................256
Tow-away alarm ................................................................40
Towing the vehicle .........................................................273
Transmission .................................................................. 191
Transmission selector lever, manually
W
Warning lamps
See Indicator lamps in the instrument cluster .......80
Warning message memory........................................... 100
Warranty coverage ........................................................ 308
unlocking ....................................................................... 276
Traveling abroad ............................................................209
Download from Www.Somanuals.com. All Manuals Search And Download.
WASHER FLUID (headlamp cleaning system) -
malfunction and warning messages ......................242
Washing the vehicle...................................................... 302
What you should know at the gas station.................. 220
Wheels............................................................................. 258
Light alloy wheels..................................................... 303
Rims and tires ........................................................... 312
Spare wheel ...............................................................260
Wheels, changing .....................................................263
Where to find it ................................................................ 12
Wind screen .................................................................... 166
Windows
Windshield washer/headlamp cleaning system
Refilling ..................................................................... 255
Winter driving ............................................................... 208
Winter driving instructions......................................... 207
Wiper blade
Replacing insert ....................................................... 296
Wiper operation
See Combination switch........................................... 114
See Power windows .................................................. 142
Index
335
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Service and Literature
Your authorized Mercedes-Benz Center has trained technicians and original Mercedes-Benz parts to service your
vehicle properly. For expert advice and quality service, see your authorized Mercedes-Benz Center.
If your are interested in obtaining service literature for your vehicle, please contact your authorized Mercedes-Benz
Center. We consider this the best way for you to obtain accurate information for your vehicle.
For further information you can find us on the Mercedes-Benz web-site www.mbusa.com.
Warning!
To help avoid personal injury, be extremely careful when performing any service work or repairs. Improper
or incomplete service or the use of incorrect or inappropriate parts or materials may damage the vehicle or its
equipment, which may in turn result in personal injury.
If you have any question about carrying out some service, turn to the advice of an authorized Mercedes-Benz
Center.
We reserve the right to modify the technical details of the vehicle as given in the data and illustrations of this
Operator’s Manual. Reprinting, translation and copying, even of excerpts, is not permitted without our prior
authorization in writing.
Title illustration no. P00.00-2731-26
Press time 11/11/02
GSP/SIP
Printed in Germany
Download from Www.Somanuals.com. All Manuals Search And Download.
Order No. 6515 1261 13 Part No. 208 584 28 96 USA Edition B 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
Please observe the following:
BOOKSPINE for Operator’s Manual
5/8 in (1.6 cm)
3.5 in (8.9 cm)
208 A
Operator’s Manual CLK-Class Cabriolet
Please ensure the correct position of model code and model name
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Leica Model Vehicle NCL L SP A User Manual
LevelOne Network Card 10 100M 32bit Fast Ethernet PC card User Manual
LG Electronics Microwave Oven LMH1017CVB User Manual
Liebherr Refrigerator BF BFI 1051 User Manual
Lincoln Electric Welder SVM138 A User Manual
Mackie Portable Speaker SP400 User Manual
Magnavox Stereo System AZ9340 05 User Manual
Marmitek Universal Remote 22328 User Manual
Martin Audio Speaker C48T User Manual
Melissa Hair Clippers 638 009 User Manual