MPD8300.OM 8/12/03 9:32 AM Page 24
MPD8300
User’s Guide
Personal Compact
Disc MP3 Player
Before operating this product,
please read these instructions completely.
Download from Www.Somanuals.com. All Manuals Search And Download.
MPD8300.OM 8/12/03 9:32 AM Page 2
SAFETY PRECAUTIONS (CONTINUED)
INFORMATION:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the fol-
lowing measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• Do not open the CD compartment while the CD is rotating.
• Always keep the CD compartment closed when not in use.
• Keep all foreign objects out of the CD compartment.
• Place the unit on a stable surface.
• Avoid installing the unit in locations described below:
• Places exposed to direct sunlight or close to heat-radiating
appliances such as electric heaters.
• On top of other stereo equipment that radiates too much
heat.
• Places lacking ventilation or dusty places.
• Places subject to constant vibration.
• Humid or moist places.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
MPD8300.OM 8/12/03 9:32 AM Page 3
Dear Customer:
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of
your musical enjoyment. Now it’s time to consider how you can maximize the fun and
excitement your equipment offers. This manufacturer and the Electronic Industries
Association’s Consumer Electronics Group want you to get the most out of your equipment
by playing it at a safe level - one that lets the sound come through loud and clear without
annoying blaring or distortion and, most importantly, without affecting your sensitive
hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of
sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard
against this by setting your equipment at a safe level BEFORE your hearing adapts.
To Establish a Safe Level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and without
distortion.
Once You Have Established a Comfortable Sound Level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future.
After all, we want you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since
hearing damage from loud noise is often undetectable until it is too late, this manufacturer
and the Electronic Industries Association’s Consumer Electronics Group recommend you
avoid prolonged exposure to excessive noise. This list of sound levels is included for your
protection.
Decibel
Level
30
Example
Quiet library, soft whispers
40
50
60
70
Living room, refrigerator, bedroom away from traffic
Light traffic, normal conversation, quiet office
Air conditioner at 20 feet, sewing machine
Vacuum cleaner, hair dryer, noisy restaurant
Average city traffic, garbage disposals, alarm clock at two feet
80
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT
EXPOSURE:
We
WantYou
LISTENING
90
Subway, motorcycle, truck traffic, lawn mower
Garbage truck, chain saw, pneumatic drill
Rock band concert in front of speakers, thunderclap
Gunshot blast, jet engine
ForALifetime
100
120
140
180
EIA
Rocket launching pad
EST. 1924
Information courtesy of the Deafness Research Foundation.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
MPD8300.OM 8/12/03 9:32 AM Page 4
LOCATION OF CONTROLS
1
2
3
4
5
6
7
8
9
10
11
12
13 14 15 16
1. Skip/Search (
2. Skip/Search (
3. MODE Button
) Button
) Button
10. HOLD Switch
11. CD OPEN Switch
12. CD Compartment
4. ESP/DIR Button
5. Display
6. EQ Button
7. Play/Pause (
Button
13. VOLUME Control
14. PHONE (Headphone) Jack
15. LINE OUT Jack (Side of Unit)
16. DC 4.5V Jack (Side of Unit)
)/Power On
+
–
8. Stop (■)/Power Off Button
9. Battery Compartment (Bottom
of Unit)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
MPD8300.OM 8/12/03 9:32 AM Page 5
POWER SOURCES
This CD player requires either two (2) “AA” cell standard or rechargeable
batteries (not included) or an AC adapter (not included).
BATTERY INSTALLATION:
The battery indicator (
) will light in the display
+
+
–
–
when batteries are low and need replacing.
1. Open the battery compartment door on the
bottom of the unit by sliding it out and then
lifting it. To prevent the possibility of losing
the cover, it cannot be removed.
–
2. Insert two (2) “AA” cell batteries (not included)
according to the polarity diagram inside the
+
battery compartment. Alkaline batteries are recommended for the
longest playing time.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated next to
the battery compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and
Carbon-zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to
prevent damage or injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and
rupture. (Follow battery manufacturer’s directions.)
AC OPERATION:
To operate the unit using AC power, connect an AC adapter (not included) to
an AC outlet having 120V, 50/60Hz AC only. Plug the small end into the DC
4.5V jack on the rear of the unit and connect the other end into the AC outlet.
The batteries are automatically disconnected when the AC adapter is used.
CAUTION: When not using AC power, disconnect the AC adapter from the
wall outlet by pulling the plug (not the cord). Do not touch the AC adapter with
wet hands. Fully insert the plug without exposing any part of the blade.
+
–
DC 4.5V
5
Download from Www.Somanuals.com. All Manuals Search And Download.
MPD8300.OM 8/12/03 9:32 AM Page 6
POWER SOURCES (CONTINUED)
RECHARGEABLE BATTERIES
1. Insert the negative side of a rechargeable NI-CAD battery into the
sleeve as shown. The sleeve must be inserted onto the negative side
of the battery, otherwise it will not work.
2. Open the battery compartment door on the bottom of the unit by
sliding it out and then lifting it. To prevent the possibility of losing
the cover, it cannot be removed.
3. Insert two (2) “AA” rechargeable NI-CAD
batteries (not included) as shown. Make sure
the rechargeable battery with the sleeve is
inserted in the position as shown at the right,
otherwise the batteries will not charge.
+
Sleeve
+
+
–
–
Charge
Spring
–
4. Close the battery compartment.
+
5. Plug the small end into the DC 4.5V jack on
the rear of the unit and connect the other end
into the AC outlet; charging will begin.
6. When charging is completed, disconnect the AC adapter plug from the
unit and the AC outlet.
NOTES :
•
The batteries are fully charged after approximately 15 hours after the
AC adapter is connected. More time may be required for charging in
cold temperatures, but never more than 24 hours.
After 24 hours, please unplug the AC adapter.
With care, rechargeable NI-CAD batteries can be recharged over 500
times.
•
•
•
•
If the operating time decreased drastically, even when the NI-CAD
batteries are properly recharged, purchase new rechargeable NI-CAD
batteries.
Only NI-CAD batteries can be recharged in this unit. Do not attempt to
charge any other type of rechargeable or standard battery.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
MPD8300.OM 8/12/03 9:32 AM Page 7
CD OPERATION
TURNING POWER ON /OFF PRESET EQ
1
1
2
1
With the power on, press the EQ but-
ton to cycle through the preset EQ
settings, or to turn the EQ off. Each
press of the PRESET EQ button will
cycle as follows: CLASSIC - POP -
JAZZ - ROCK - NORMAL.
NOTE: To operate this function,
there must be a CD inside the CD
compartment.
To turn the unit on, press and hold the
Play/ Pause ( ) /Power On button ❶.
To turn the unit off, press and hold the
Stop (■) /Power Off button ❷ until the
unit turns off. The unit will automatically
shut off if stopped (CD Standby) for one
minute.
Sound Through a Home Audio System
By using a home audio connection cable (not included), superb sound can be
heard through your home audio system. Before making any connections, turn off
the power to all equipment.
Plug a connection cable (not included) between the LINE OUT jack on the side of
the CD player and the amplifier’s AUX or CD input jack. (Do not connect it to the
amplifier’s PHONO jack.)
NOTE: If the radio interferes with TV reception, move the unit away from the TV or
turn off the power to this unit.
HOLD
1
Slide to the HOLD position to disable
the buttons; the Hold indicator (Lock)
will appear in the display. Slide to the
OFF position to enable the buttons; the
Hold indicator will disappear.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
MPD8300.OM 8/12/03 9:32 AM Page 8
CD OPERATION (CONTINUED)
TO INSERT AND PLAY A CD
This CD player is designed to play standard CDs as well as all kinds of Mini
Audio Discs and MP3 CD ROMS, such as CD recordables and rewritables. Do
not try to play CDI, CDV, DVD or computer CDs in this unit.
1
2
1
2
The unit will start playback
automatically, otherwise, press the
Press and hold the Play/Pause (
/Power On button ❶ to turn the unit on.
)
Play/Pause (
) /Power On button to
Open the CD compartment lid by
begin playback; the current track and
elapsed playing time (and CD
information, if playing an MP3) will
appear in the display.
sliding the CD OPEN switch
❷. Gently
press a disc, label side up, onto the
spindle until it locks in place. Close the
CD compartment lid; the total tracks
(and folders, if using MP3) will appear
in the display.
3
4
2
1
Adjust the VOLUME control ❶ and EQ
button ❷ as desired.
When the disc is through playing, it will
stop. Press the Stop (■) /Power Off button
to stop the disc before it is finished. Press
and hold the Stop (■) /Power Off button
again to turn the unit off.
SEE THE NEXT PAGE FOR NOTES ON CD PLAYBACK
8
Download from Www.Somanuals.com. All Manuals Search And Download.
MPD8300.OM 8/12/03 9:32 AM Page 9
CD OPERATION (CONTINUED)
CD PLAYBACK NOTES:
• See page 18 for more information on MP3’s.
• When recording (“burning”) CDs, make sure the session is “finalized”, or simply
record (“burn”) only one session. You can find more information in your
recorder’s manual.
• When playing an MP3, CD and song information is recorded with the song, the
disc information (song title and artist) will scroll across the display.
• This unit is capable of playing mini 3” singles.
• If a disc is inserted incorrectly, dirty, damaged or is not present at all, “no disc”
will appear in the display.
• Playback will stop when you open the CD compartment, but it is not
recommended to open the compartment before the Stop (■) /Power Off button
is pressed.
• If there is no activity for 60 seconds, the unit will turn itself off to save the
batteries.
• It may take 10 to 30 seconds for the player to read an MP3 CD and begin
playback, depending on the number of tracks burned on the CD.
TO PAUSE A CD
2
1
During CD playback, if you wish to
pause the disc momentarily, press
Press the Play/Pause (
button again to release pause and
)/Power On
the Play/Pause (
)/Power On but- resume playback. The sound returns
ton. Playback stops but the disc con- and the elapsed time in the display
tinues to spin and the elapsed time stops flashing.
flashes in the display.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
MPD8300.OM 8/12/03 9:32 AM Page 10
CD OPERATION (CONTINUED)
TO BEGIN PLAYBACK FROM A SPECIFIC TRACK
1
2
1
2
While in the Stop mode, press the When the desired track number
appears in the display, press the
Play/Pause ( )/Power On button;
Skip/Search (
) ❶ or (
) ❷ button
to select a specific track for playback.
Playback will begin with the track (or
file) you selected.
SKIPPING TRACKS WHILE PLAYING AN MP3 CD
Press the ESP/DIR button to select one of the following settings:
File Skip: the files will cycle one by one when pressing the Skip/Search buttons.
Album Skip: the unit will skip to the first track of each folder when pressing the
Skip/Search buttons; i.e., if there are three files in folder one and the Skip/Search
(
) button is pressed, the unit will go to track 4.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
MPD8300.OM 8/12/03 9:32 AM Page 11
CD OPERATION (CONTINUED)
FORWARD/REVERSE SKIP TRACK
1
2
During playback, press and release During playback, press and release the
Skip/Search ( ) button once to
the Skip/Search (
) button once to
move the player back to the beginning
of the currently playing track. Press the
advance the player to the beginning of
the next track. Press the Skip/Search
Skip/Search (
) button repeatedly to
(
) button repeatedly to advance
move the player back to lower num-
bered tracks. See note on the bottom
of page 10 if playing an MP3.
the player to higher number tracks.
See note on the bottom of page 10 if
playing an MP3.
HIGH-SPEED MUSIC SEARCH
During playback, depress and hold
1
either the Skip/Search (
) ❶ or (
)
❷ button to move the player forward or
backward within a track to locate a
specific musical passage. The player
will move forward or backward at high
speed as long as the buttons are
depressed. When you release the
1
2
Skip/Search (
) ❶ or (
) ❷ button,
normal playback will resume.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
MPD8300.OM 8/12/03 9:32 AM Page 12
CD OPERATION (CONTINUED)
REPEAT PLAYBACK OF ONE TRACK
1
2
2
2
1
1
To repeat a single track, press the The specific track you selected will be
MODE button ❶ once while playing a repeated continuously. To cancel
Repeat playback, press the MODE but-
ton ❶ repeatedly until the mode indica-
tor disappears. You can also press the
Stop (■) /Power Off button ❷ to stop the
repeat playback.
CD; the Repeat 1 indicator will appear
in the display. Press the Skip/Search
(
) ❷ or (
) ❸ button to select the
specific track that you wish to repeat.
REPEAT PLAYBACK OF ALL TRACKS
1
2
2
1
To repeat all the tracks on the CD, All tracks on the disc will be repeated
press the MODE button twice while continuously. To cancel Repeat play-
playing a CD; the Repeat ALL indica- back, press the MODE button ❶
tor will appear in the display.
repeatedly until the mode indicator dis-
appears. You can also press the Stop
(■) /Power Off button ❷ to stop the repeat
playback.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
MPD8300.OM 8/12/03 9:32 AM Page 13
CD OPERATION (CONTINUED)
REPEAT PLAYBACK OF A DIRECTORY (MP3 w/folders only)
1
2
2
2
1
1
To repeat all files in a directory (MP3 All files in the selected directory will be
CD only), press the MODE button ❶ repeated continuously. To cancel
Repeat playback, press the MODE but-
ton ❶ repeatedly until the mode indica-
three times while playing a CD; the
Repeat DIR. indicator will appear in
the display. Press the Skip/Search tor disappears. You can also press the
Stop (■) /Power Off button ❷ to stop the
repeat playback. See page 18 for more
info on MP3 format.
(
) ❷ or (
) ❸ button to select the
specific directory that you wish to
repeat.
INTRO PLAYBACK (Will play the first 10 seconds of each track)
1
2
2
1
The first 10 seconds of all tracks on the
disc will be played in sequence. To
cancel Intro playback, press the MODE
button ❶ repeatedly until the Mode
indicator disappears. After the first 10
seconds of all the tracks have played,
the until will stop, or press the Stop (■)
/Power Off button ❷.
Press the MODE button three times
(four times if an MP3 CD with multiple
directories is inserted) while playing a
CD; “INTR” will appear in the display.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
MPD8300.OM 8/12/03 9:32 AM Page 14
CD OPERATION (CONTINUED)
TO RANDOMLY PLAY BACK A CD
1
2
Press the MODE button four times The unit will play the tracks in random
(five times if an MP3 CD with multiple order. When the disc is through playing
directories is inserted) while playing a randomly, it will stop. Press the Stop
CD; “RAND” will appear in the display. (■)/Power Off button to stop the disc
before it is finished.
TO RANDOMLY PLAY BACK A CD REPEATEDLY
1
2
Press the MODE button five times (six The unit will play the tracks in random
times if an MP3 CD with multiple order repeatedly until the Stop
directories is inserted) while playing a (■)/Power Off button is pressed.
CD; “RAND ALL” will appear in the
display.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
MPD8300.OM 8/12/03 9:32 AM Page 15
CD OPERATION (CONTINUED)
TO RANDOMLY PLAY BACK A DIRECTORY
REPEATEDLY (MP3 ONLY)
1
2
Press the MODE button seven times The unit will play all the tracks of the
while playing a CD; “RAND DIR” will selected directory in random order
appear in the display.
repeatedly. Press the Stop (■)/Power
Off button to stop Random Directory
playback.
TO RESUME NORMAL PLAYBACK
Press the MODE button a sixth time (eighth time if an MP3 CD with
multiple directories is inserted) to resume normal playback.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
MPD8300.OM 8/12/03 9:32 AM Page 16
CD OPERATION (CONTINUED)
TO PROGRAM THE MEMORY (UP TO 32 TRACKS)
Programming is the ability to preselect the order in which a series of tracks will be
played.
1
2
1
2
While in the Stop mode, press the Select a track to be programmed using the
MODE button. “000: (track number) will
blink and “P-001” (program number) will
appear in the display.
Skip/Search (
) ❶ or (
) ❷ button.
3
4
Press the MODE button to memorize
the track. Repeat steps 2 and 3 to
program additional tracks up to a
maximum of 32 tracks.
Press the Play/Pause (
button to begin program playback.
) /Power On
NOTES:
•
To clear the program memory, press the MODE button while in the Stop
mode, then press the Stop (■) /Power Off button.
SEE TOP OF NEXT PAGE FOR MORE NOTES ON PROGRAMMING
THE MEMORY.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
MPD8300.OM 8/12/03 9:32 AM Page 17
CD OPERATION (CONTINUED)
NOTES ON PROGRAM PLAYBACK
•
You can review the program by pressing the MODE button repeatedly
while in the Stop mode.
•
To add a track to the program memory, simply press the MODE
button repeatedly until the desired program number is shown, then
enter the next track.
•
•
•
•
Press the Stop (■) /Power Off button to stop the program before it is
finished (the program memory will be saved).
Each file may be stored in the program memory as many times as
desired (up to 32 files).
You can scroll through the program while it is playing using the
Skip/Search (
) or ( ) button.
“FULL” will appear in the display if you try to program more than 32
tracks.
ESP (ELECTRONIC SKIP PROTECTION)
This feature protects against loss of sound caused by vibrations and
shocks. Continuous playback is ensured once some of the music has
been stored into memory.
ESP will automatically be activated when listening to standard or MP3
CDs. You cannot deactivate ESP while listening to an MP3 CD. However,
you can deactivate it when playing a standard CD by simply pressing the
ESP/DIR button; the ESP indicator will disappear from the display.
Deactivating the ESP will conserve battery life.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
MPD8300.OM 8/12/03 9:32 AM Page 18
CD OPERATION (CONTINUED)
MP3 FAQs - Frequently Asked Questions
Please read before playing an MP3 CD.
Does the unit support packet write CD-RW?
Yes it can. You can add or delete MP3 files without
reformatting. It appears like a PC hard drive.
Can the unit read regular music CDs?
Yes it can. However you can not mix MP3s and WAV files on
the same CD. If you do this your Portable MP3 CD Player will
play only the MP3 files.
Does the unit have Electronic Skip Protection built-in?
Yes it has an anti-shock buffer (45 seconds for standard CD
and 120 seconds for MP3 CD). What it means for the
everyday user is that it can withstand road bumps, shaking,
etc. There will be no skipping when you jog, or run on a tread
mill or drive on a bumpy road.
Can I use the MP3 extension for non-audio data files?
No, this may result in serious malfunction and harmful noise
interference.
Can I mix MP3 files with other file types on the CDR?
Yes, but your Portable MP3 CD Player will ignore those files
and read only the MP3 files on the CDR.
Does the unit support multi-session CDRs?
If the MP3 CD is not finalized, you can burn a new group of
MP3 files until the CD is full. However, you cannot play a
CDR in this unit until it is finalized.
Does the unit support subdirectories (subfolders)?
Yes, the unit can read MP3 files from subfolders.
What appears on the display when playing back MP3 CDs?
The album, title and artist (if set when MP3 was recorded).
18
Download from Www.Somanuals.com. All Manuals Search And Download.
MPD8300.OM 8/12/03 9:32 AM Page 19
CD OPERATION (CONTINUED)
SINGLE SESSION
The following chart is an example of a Windows Explorer display that
will appear on your computer monitor for a single session MP3 CD ROM
with directories/albums. Check the added notes to help you understand
the MP3 CD unit display and the playback sequence of directories/
albums and tracks on a single session MP3 CD.
MULTI SESSION
The computer user does not need to finalize the CDR disc as music is
burned on the CD. Because of this, the music can be downloaded at
different times until the whole CD is full.
(E) CD-ROM drive
Directory 01
Skipped
Blur01.mp3
Blur02.mp3
Blur03.mp3
Blur04.mp3
Blur.jpg
Lyric.doc
Directory 02
Directory 04
Girl09.mp3
Girl10.mp3
Spice05.mp3
Spice06.mp3
Directory 03
Directory 05
Boyz11.mp3
Boyz12.mp3
2men07.mp3
2men08.mp3
Skipped
Directory 06
Bread13.mp3
Abba01.wav
Abba02.wav
Directory 07
Marx14.mp3
Twain15.mp3
NOTES:
• The arrow pathway shows the sequence of MP3 directory and file
playback.
• This example has a total of 7 MP3 directories.
• Based on this layout, the first file will be “Blur01.mp3” and the last file
will be “Twain15.mp3”.
• “Skipped” denotes a directory which contains non-audio files only, e.g.
jpg, wav, etc. These cannot be detected nor played on this player.
When an album contains mixed format files, the non-MP3 files will be
skipped.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
MPD8300.OM 8/12/03 9:32 AM Page 20
CARE AND MAINTENANCE
Caring for Compact Discs
•
Treat the compact disc carefully. Handle the
compact disc only by its edges. Never allow your
fingers to come in contact with the shiny, unprinted
side of the compact disc.
•
•
Do not attach adhesive tape, stickers, etc. to
the compact disc label.
Clean the compact disc periodically with a soft, lint-free, dry cloth. Never use
detergents or abrasive cleaners to clean the compact disc. If necessary, use a
CD cleaning kit.
•
•
If a compact disc skips or gets stuck on a section of the compact disc, the CD
is probably dirty or damaged (scratched).
When cleaning the compact disc, wipe in straight lines from the center of the
compact disc to the outer edge of the compact disc. Never wipe in circular
motions.
Z
•
This unit is designed to play only compact discs bearing the
identification logo as shown here. Other discs may not conform to
the CD standard and may not play properly.
•
•
Compact discs should be stored in their cases after each use to avoid
damage.
Do not expose compact discs to direct sunlight, high humidity, high
temperatures or dust, etc. Prolonged exposure or extreme temperatures can
warp the compact disc.
•
Do not stick or write anything on either side of the compact disc. Sharp writing
instruments or the ink may damage the surface.
Cleaning the Unit
•
•
•
To prevent fire or shock hazard, disconnect your unit from the AC power
source when cleaning.
The finish on your unit may be cleaned with a dust cloth and cared for as other
furniture. Use caution when cleaning and wiping the plastic parts.
Mild soap and a damp cloth may be used on the front panel.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
MPD8300.OM 8/12/03 9:32 AM Page 21
TROUBLESHOOTING GUIDE
If you experience a problem with this unit, check the chart below before
calling for service.
SYMPTOM
Unit will not
CAUSE
SOLUTION
Dead batteries, or not Replace batteries, and install
turn on.
installed properly.
AC adapter
not connected.
CD compartment
not closed.
properly.
Check AC adapter
connection.
Disc will not play.
Close CD compartment.
Disc inserted
incorrectly.
Dirty or defective
disc.
Reinsert disc correctly.
Try another disc.
Moisture
condensation
on disc.
Wipe disc with soft
cloth.
Erratic CD playback.
Dirty or defective
disc.
Clean or replace disc.
No sound from
headphones.
Headphone
plug not inserted
correctly.
Reinsert headphone
plug correctly.
VOLUME control
set to minimum.
Weak batteries.
Defective disc.
ESP is not activated.
Increase volume.
Replace batteries.
Try another disc.
Press the ESP/DIR button.
ESP not working.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
MPD8300.OM 8/12/03 9:32 AM Page 22
SPECIFICATIONS
Power requirement DC..........................................2 x AA (LR6) Alkaline batteries
Power requirement AC.................................DC IN 4.5V Adapter, Center Positive
Disc Diameter .................................................................................4.72” (120mm)
.........................................................................................3.15” (80mm) Single CD
Optical Source......................................................................Semiconductor Laser
D/A Conversion..............................................1-bit DAC eight times oversampling
MPEG Rate.........................................................................................32-384Kbps
Sampling Frequency...............................................8/11.025/12KHz for MPEG2.5
...............................................................................16/22.05/24KHz for MPEG2
.................................................................................32/44.1/48KHz for MPEG1
MP3 Playback.............................................................ISO9660 format compatible
Output level.........................................................Line Output 0.6Vms (47K ohms)
Headphone 23mW (32 ohms)
Check the CD burner/recorder’s documentation to see if it complies with these
specifications.
Specifications are subject to change without notice.
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE
VISIT OUR WEBSITE AT
WWW.MEMOREXELECTRONICS.COM
OR CONTACT CUSTOMER SERVICE AT 1-800-919-3647.
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90
DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR
PLACE OF PURCHASE OR TO MEMOREX.
FOR PARTS AND ACCESSORIES, CONTACT FOX INTERNATIONAL AT
1-800-321-6993.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
MPD8300.OM 8/12/03 9:32 AM Page 23
Memcorp, Inc.
Weston, FL
Printed in Hong Kong
Download from Www.Somanuals.com. All Manuals Search And Download.
|