MC1003.QXD 3/3/03 9:56 AM Page 21
SPLASH-RESISTANT AM/FM STEREO
RADIO WITH COMPACT DISC PLAYER
MODEL: MC1003
BEFORE OPERATING THIS PRODUCT, PLEASE READ THESE
INSTRUCTIONS COMPLETELY.
OPERATING INSTRUCTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
MC1003.QXD 3/3/03 9:56 AM Page 2
SAFETY PRECAUTIONS (CONTINUED)
FCC WARNING:
This equipment may generate or use radio frequency energy. Changes
or modifications to this equipment may cause harmful interference
unless the modifications are expressly approved in the instruction man-
ual. The user could lose the authority to operate this equipment if an
unauthorized change or modification is made.
LASER SAFETY: This unit employs a laser. Only qualified service per-
sonnel should attempt to service this device due to possible eye injury.
CAUTION: USE OF CONTROLS, ADJUSTMENTS OR PERFOR-
MANCE PROCEDURE HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
INFORMATION:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the fol-
lowing measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
MC1003.QXD 3/3/03 9:56 AM Page 3
SAFETY PRECAUTIONS (CONTINUED)
• Do not open the CD compartment while the CD is rotating.
• Always keep the CD compartment closed when not in use.
• Keep all foreign objects out of the CD compartment.
• Place the unit on a stable surface.
• Avoid installing the unit in locations described below:
• Places exposed to direct sunlight or close to heat radiating
appliances such as electric heaters.
• On top of other stereo equipment that radiates too much
heat.
• Placed lacking ventilation or dusty places.
• Places subject to constant vibration.
• Humid or moist places.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
MC1003.QXD 3/3/03 9:56 AM Page 4
Dear Customer:
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of
your musical enjoyment. Now it’s time to consider how you can maximize the fun and
excitement your equipment offers. This manufacturer and the Electronic Industries
Association’s Consumer Electronics Group want you to get the most out of your equipment
by playing it at a safe level. One that lets the sound come through loud and clear without
annoying blaring or distortion and, most importantly, without affecting your sensitive
hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of
sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard
against this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and without
distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future.
After all, we want you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since
hearing damage from loud noise is often undetectable until it is too late, this manufacturer
and the Electronic Industries Association’s Consumer Electronics Group recommend you
avoid prolonged exposure to excessive noise. This list of sound levels is included for your
protection.
Decibel
Level
30
Example
Quiet library, soft whispers
40
50
60
70
Living room, refrigerator, bedroom away from traffic
Light traffic, normal conversation, quiet office
Air conditioner at 20 feet, sewing machine
Vacuum cleaner, hair dryer, noisy restaurant
Average city traffic, garbage disposals, alarm clock at two feet
80
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT
EXPOSURE:
We
WantYou
LISTENING
90
Subway, motorcycle, truck traffic, lawn mower
Garbage truck, chain saw, pneumatic drill
Rock band concert in front of speakers, thunderclap
Gunshot blast, jet engine
ForALifetime
100
120
140
180
EIA
Rocket launching pad
EST. 1924
Information courtesy of the Deafness Research Foundation.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
MC1003.QXD 3/3/03 9:56 AM Page 5
LOCATION OF CONTROLS
MAIN
1. VOLUME/POWER Control
2. CD Track Display
10. CD Door OPEN Button
11. TUNING Control
3. SKIP/Search
4. MODE Button
5. SET Button
Button
12. AM/FM Dial Scale and Pointer
13. PROGRAM Button
14. Clock Display
6. REPEAT Button
15. Function Switch
7. STOP ( ) Button
16. SKIP/Search
Button
■
8. Headphone Jack
17. PLAY/PAUSE (
) Button
9. Mirror/CD Compartment
5
Download from Www.Somanuals.com. All Manuals Search And Download.
MC1003.QXD 3/3/03 9:56 AM Page 6
LOCATION OF CONTROLS (CONTINUED)
REAR
1
2
3
4
5
1. Hanging Cord
2. Wall Mount Holes
+
–
3. DC 9V Jack
4. Battery Compartment
5. Battery Door Locking Knob
6
Download from Www.Somanuals.com. All Manuals Search And Download.
MC1003.QXD 3/3/03 9:56 AM Page 7
INSTALLATION
SPLASH RESISTANT: DO NOT use this unit under direct
water flow. This unit is splash resistant, meaning it can
withstand small splashes of water.
MOUNTING THE UNIT ON
THE BASE
To use this unit with the
Hole
Hook
supplied base, simply slide
the hole on the rear of the
unit into the hook on the
base and gently push it
backwards so it snaps in
place as shown in figure 1.
Figure 1
REMOVING THE UNIT
FROM THE BASE
To remove unit from base,
simply press in on the tab
located at the bottom of the
base and lift up the unit as
shown in figure 2.
USING THE HANGING
CORD (No Figure):
Use the Hanging Cord to
hang the unit on an already
installed hook, nail, etc.
When using the Hanging
cord, also use the Wall
Adapter for extra support.
Figure 2
7
Download from Www.Somanuals.com. All Manuals Search And Download.
MC1003.QXD 3/3/03 9:56 AM Page 8
INSTALLATION (CONTINUED)
INSTALLING ON A WALL
1
2
Put the Wall Adapter with suction cups Pull the suction cup lever down and it
on the wall.
will stick to the wall.
3
4
Place the Detachable Mounting Connect the main unit to the Wall
Bracket onto the Wall Adapter.
Adapter by inserting the holes on the
base unit into the hooks on the Wall
Adapter.
REMOVAL
To remove, reverse the above steps.
IMPORTANT CAUTION
Make sure the suction cups are secured on the wall every two to three weeks.
HEADPHONE JACK:
Plug headphones with a 3.5mm plug into this jack for private listening.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
MC1003.QXD 3/3/03 9:56 AM Page 9
POWER SOURCES
This CD player requires either eight (8) “C” cell batteries (not included) or a
9V AC adapter having a positive center.
BATTERY INSTALLATION
1. Make sure the unit is not on the
base.
Open
the
battery
compartment door by rotating the
Battery knob clockwise, then lift
the battery compartment off.
2. Insert eight (8) “C” cell batteries
(not included) as shown in the
illustration to the right. Alkaline
batteries are recommended for
the longest playing time.
3. Replace the battery compartment
cover and rotate the Battery knob
counter-clockwise so the compartment is secured.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated next to the battery
compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with
fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or
injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.
(Follow battery manufacturer’s directions.)
+
–
AC OPERATION
To operate the unit using AC power, connect an adapter with an input of
120V, 60Hz and an output of 9V DC, 500mA (adapter not included) to an
AC outlet having 120V, 60Hz AC only. Plug the small end into the DC 9V
jack on the unit and connect the other end into the AC outlet. The batteries
are automatically disconnected when the AC adapter is used.
CAUTION: When not using AC power, disconnect the AC adapter from
the wall outlet by pulling the plug (not the cord). Do not touch the AC
adapter with wet hands and plug fully inserted without exposing any part
of the blade. Do not use an AC adapter near water.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
MC1003.QXD 3/3/03 9:56 AM Page 10
OPERATION
FOGLESS MIRROR
Before using, remove the thin film over the fogless mirror and discard.
CLEANING THE MIRROR
If the mirror, which is made of polycarbonate (plastic), becomes dirty or smudged
with fingerprints, it may be cleaned with a wet soft cloth. Never use abrasive cloths
or polishes as these will mar the finish of the mirror.
TO PLAY THE RADIO
1
2
Rotate the VOLUME/POWER control
■ clockwise until a click is heard to
turn the unit on. Turn the Function
switch ■ to the desired band (AM or
FM).
Tune a station by rotating the TUNING
control ■. Adjust the VOLUME/
POWER control ■ as desired.
Antennas
Turn the unit for best AM/FM reception.
TO INSERT A CD
TO REMOVE A CD
1
1
Open the CD Compartment Door by
pressing up on the CD Door OPEN
button. Gently push a disc, label side
up, onto the spindle until it locks in
place and close the CD Compartment
Door.
Make sure the CD has stopped and
open the CD Compartment Door by
pressing up on the CD Door OPEN
button Hold the edge of the CD and
pick it up. Close the CD Compartment
Door.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
MC1003.QXD 3/3/03 9:56 AM Page 11
OPERATION (CONTINUED)
TO PLAY A CD
1
2
Insert a CD as described on the previous
page and press the PLAY/PAUSE
button to start playback.
)
Rotate the VOLUME/POWER control
■ clockwise until a click is heard to
turn the unit on. Turn the Function
switch ■ to the CD position.
(
TO PAUSE PLAYBACK, press the
PLAY/PAUSE ) button again; PLAY
will blink in the display. Press the
PLAY/PAUSE ) button again to
(
(
resume playback.
3
4
Adjust the VOLUME/POWER ■ as
desired. To skip forward or backward
through the tracks on the disc, press the
When the disc is through playing, it
will stop. Press the STOP (■) button
to stop the disc before it is finished.
SKIP/Search
■ or
■ button. To
search forward or backward through the
tracks on the disc, press and hold the
SKIP/Search
■ or
■ button.
NOTES:
• This unit is capable of playing standard CDs or 3” singles; no adapter is
required.
• If a disc is inserted incorrectly, dirty, damaged or not present at all, the disc
will not play and “disc” will appear in the display.
• To remove the disc, open the CD Compartment, hold the edge of the CD and
lift it out.
• The maximum time of a CD is 74 minutes for this unit.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
MC1003.QXD 3/3/03 9:56 AM Page 12
OPERATION (CONTINUED)
TO REPEATEDLY PLAY BACK ONE TRACK
2
1
Turn the unit on and turn the Function
switch ■ to the CD position.
Press the REPEAT button ■ once;
RPT will blink in the display. Select a
Press the PLAY/PAUSE
) button
(
■. The unit will then play the same track
over and over until the STOP (■) button
■ is pressed. Adjust the VOLUME/
POWER control ■ as desired.
track using the SKIP/Search
■ or
■ buttons.
TO REPEATEDLY PLAY BACK ALL TRACKS ON A CD
1
2
Turn the unit on and turn the Function
switch ■ to the CD position.
Press the REPEAT button ■ twice;
RPT will light solid in the display.
Press the PLAY/PAUSE
) button
(
■. The unit will then play all the tracks
on the CD over and over until the
STOP (■) button ■ is pressed. Adjust
the VOLUME/POWER control ■ as
desired.
TO CANCEL REPEAT PLAYBACK
To cancel Repeat playback, repeatedly press the REPEAT button until the RPT
indicator disappears in the display.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
MC1003.QXD 3/3/03 9:56 AM Page 13
OPERATION (CONTINUED)
TO PROGRAM THE MEMORY (UP TO 20 TRACKS)
2
1
Press the PROGRAM button ■, “PRG” and
“01” will blink in the display. Press the
Turn the unit on and turn the Function
control to the CD position.
SKIP/Search
■ or
■ button
repeatedly to select the first desired track to
program. Press the PROGRAM button ■ to
memorize the track.
4
3
Adjust the VOLUME/POWER control ■ as
desired. To skip forward or backward
through the programs, press the
Press the SKIP/Search
■ or
■
button repeatedly to select the second desired
track to program. Press the PROGRAM
button ■ to memorize the track. Repeat this
step to program additional tracks up to a
maximum of 20 tracks. Press the
SKIP/Search
■ or
■ button.
When the disc is through playing, it will
stop.
PLAY/PAUSE
) button ■ to begin
(
program playback.
NOTES:
•
•
•
Press the STOP (■) button to stop the disc before it is finished.
As each program is played, the track number is shown in the display.
Programming is the ability to preselect the order in which a series of tracks will be
played.
•
•
•
To cancel Program memory, while in the Stop mode mode press the STOP
button until “PRG” disappears from the display.
Each track may be stored in the program memory as many times as desired (up
to 20 tracks).
Repeat playback can be used in conjunction with program playback.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
MC1003.QXD 3/3/03 9:56 AM Page 14
OPERATION (CONTINUED)
TO SET OR RESET THE ACTUAL TIME
1
2
Press the MODE button four times; Repeatedly press the SET button ■ to
the month will appear in the display.
set the current month, then press the
MODE button ■ to confirm; the day
will appear in the display.
3
4
Repeatedly press the SET button ■ to Repeatedly press the SET button ■ to
set the current day, then press the set the current minute, then press the
MODE button ■ to confirm; the current MODE button ■ to confirm, the press
hour will appear in the display.
the SET button ■ to exit.
Repeatedly press the SET button ■ to
set the current hour, then press the
MODE button ■ to confirm; the current
minute will appear in the display.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
MC1003.QXD 3/3/03 9:56 AM Page 15
OPERATION (CONTINUED)
TO SET OR RESET THE ALARM TIME
Please note that the alarm will be a beeping sound for 30 seconds. The alarm
cannot be set to turn on to the radio.
1
2
Press the MODE button ■ twice; the Repeatedly press the SET button ■ to
alarm time hour will blink. Repeatedly set the alarm minute, then press the
press the SET button ■ to set the MODE button ■ to confirm and exit.
alarm hour, then press the MODE
button ■ to confirm; the alarm minute
will appear in the display.
3
Press the MODE button ■ once; the alarm time will blink in the display. Press the
SET button ■ repeatedly to turn on the Alarm, Beep and/or Snooze features as
follows (see below for description of features):
Press SET button ■ once to activate the alarm.
Press SET button ■ twice to activate the alarm and beep feature.
Press SET button ■ three times to activate the alarm, beep and snooze features.
Press SET button ■ four times to activate the beep feature only.
Press SET button ■ five times to activate the alarm and snooze feature.
Press SET button ■ six times to turn all features off.
Press the MODE button ■ three times to confirm setting.
DESCRIPTION OF FEATURES (ALARM, BEEP AND SNOOZE)
ALARM: When the alarm is activated (Alarm indicators will appear), the alarm will
sound for 30 seconds then turn off when the alarm time matches the current time.
BEEP: When the beep is activated (Beep indicator will appear), a beep will be
heard every hour (i.e. 1:00, 9:00, etc.).
SNOOZE: When the snooze is activated (Snooze indicator will appear), the alarm
will turn off for eight minutes and then turn on again. See next page for detailed
description of the Snooze feature.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
MC1003.QXD 3/3/03 9:56 AM Page 16
IMPORTANT SAFETY INSTRUCTIONS
TO SHUT OFF THE ALARM
CHECKING TIMES/DATE
1
1
To turn off the alarm while it is sounding,
press the SET button. The alarm will
stop and be set for the next day.
Press the SET button once while in the
actual time mode to check the alarm
time, twice to check the date and three
times to check the seconds. While
checking the alarm or date, the unit will
revert back to the actual time mode after
three seconds. When checking the
seconds, you must press the SET button
again to return to the actual time.
TO USE THE SNOOZE FEATURE
1
2
Activate the Snooze feature as
To cancel the Snooze feature, press
described on the previous page. When the MODE button ■ once, then the
the alarm sounds, press the SET
button within 30 seconds; the alarm
will turn off for eight minutes and then
turn on again. If the SET button is not
pressed within 30 seconds, the alarm
will just turn off.
SET button ■ repeatedly until the
indicators disappear from the display.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
MC1003.QXD 3/3/03 9:56 AM Page 17
TROUBLESHOOTING GUIDE
If you experience a problem with this unit, check the chart below before
calling for service.
SYMPTOM
Unit will not
turn on.
CAUSE
Weak or dead
batteries.
SOLUTION
Replace batteries.
Wrong adapter being
used
Use only center positive adapter
with 9V output.
AC adapter
not connected.
CD compartment
not closed.
Disc inserted
incorrectly.
Dirty or defective
disc.
Check AC adapter
connection.
Close CD compartment.
Disc will not play.
Reinsert disc correctly.
Try another disc.
Moisture
condensation
on disc.
Wipe disc with soft
cloth.
Erratic CD playback.
No sound.
Dirty or defective
disc.
Headphone
Clean or replace disc.
Unplug headphones.
plug inserted into
headphone jack.
VOLUME/POWER
control set to minimum.
Weak batteries.
Defective disc.
Increase volume.
Replace batteries.
Try another disc.
Function is not set
Turn the FUNCTION switch to
to the desired position. the desired function.
Noise or sound
distorted on radio.
Station not tuned
properly for AM or FM
Unit is not
positioned correctly.
Retune AM or FM
broadcast station.
Rotate unit until best
reception is obtained.
Activate alarm.
.
Alarm does not sound. Alarm not activated.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
MC1003.QXD 3/3/03 9:56 AM Page 18
CARE AND MAINTENANCE
Caring for Compact Discs
•
Treat the compact disc carefully. Handle the
compact compact disc only by its edges. Never
allow your fingers to come in contact with the
shiny, unprinted side of the compact compact
disc.
•
•
Do not attach adhesive tape, stickers, etc. to the compact disc label.
Clean the compact disc periodically with a soft, lint-free, dry cloth. Never use
detergents or abrasive cleaners to clean the compact disc. If necessary, use a
CD cleaning kit.
•
•
If a compact disc skips or gets stuck on a section of the compact disc, it is
probably dirty or damaged (scratched).
When cleaning the compact disc, wipe in straight lines from the center of the
compact disc to the outer edge of the compact disc. Never wipe in circular
motions.
Z
•
•
Compact discs should be stored in their cases after each use to
avoid damage.
Do not expose compact discs to direct sunlight, high humidity,
high temperatures, or dust, etc. Prolonged exposure or extreme temperatures
can warp the compact disc.
•
Do not stick or write anything on either side of the compact disc. Sharp writing
instruments, or the ink may damage the surface.
Cleaning the unit
•
•
•
To prevent fire or shock hazard, disconnect your unit from the AC power
source when cleaning.
The finish on your unit may be cleaned with a dust cloth and cared for as other
furniture. Use caution when cleaning and wiping the plastic parts.
Mild soap and a damp cloth may be used on the front panel.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
MC1003.QXD 3/3/03 9:56 AM Page 19
SPECIFICATIONS
Frequency Range (FM) .......................................................87.5–108MHz
Frequency Range (AM) .......................................................530–1720kHz
Dimensions.............................................12” (H) x 6–1/2” (W) x 3-1/4” (D)
Weight ..............................................................................................1.4Kg
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE
VISIT OUR WEBSITE AT
WWW.MEMOREXELECTRONICS.COM
OR CONTACT CUSTOMER SERVICE AT 1-800-919-3647.
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90
DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR
PLACE OF PURCHASE OR MEMOREX.
FOR PARTS AND ACCESSORIES, CONTACT FOX INTERNATIONAL AT
1-800-321-6993.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
MC1003.QXD 3/3/03 9:56 AM Page 20
Memcorp, Inc.
Weston, FL
Printed in Hong Kong
Download from Www.Somanuals.com. All Manuals Search And Download.
|