MKS8502.IT.O/M.QXD 7/17/03 9:44 AM Page 21
MKS8502
User’s Guide
CD/CD+G
Karaoke System
with B&W Monitor,
Video Camera and
Sound Effects Microphone
Before operating this product,
please read these instructions completely.
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS8502.IT.O/M.QXD 7/17/03 9:44 AM Page 2
Dear Customer:
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your
musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your
equipment offers. This manufacturer and the Electronic Industries Association’s Consumer
Electronics Group want you to get the most out of your equipment by playing it at a safe level. One
that lets the sound come through loud and clear without annoying blaring or distortion-and, most
importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of
sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard against
this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all,
we want you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since hearing
damage from loud noise is often undetectable until it is too late, this manufacturer and the
Electronic Industries Association’s Consumer Electronics Group recommend you avoid prolonged
exposure to excessive noise. This list of sound levels is included for your protection.
Decibel
Level
30
Example
Quiet library, soft whispers
40
50
60
70
Living room, refrigerator, bedroom away from traffic
Light traffic, normal conversation, quiet office
Air conditioner at 20 feet, sewing machine
Vacuum cleaner, hair dryer, noisy restaurant
Average city traffic, garbage disposals, alarm clock at two feet
80
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE:
90
Subway, motorcycle, truck traffic, lawn mower
Garbage truck, chain saw, pneumatic drill
Rock band concert in front of speakers, thunderclap
Gunshot blast, jet engine
100
120
140
180
Rocket launching pad
Information courtesy of the Deafness Research Foundation.
EIA
EST. 1924
We
WantYou
LISTENING
ForALifetime
2
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS8502.IT.O/M.QXD 7/17/03 9:44 AM Page 3
SAFETY INSTRUCTIONS
Before using the unit, be sure to read all operating instructions
carefully. Please note that these are general precautions and may not
pertain to your unit. For example, this unit may not have the capability
to be connected to an outdoor antenna.
15. OVERLOADING
Do not overload wall outlets and extension cords as this can result in a
risk of fire or electric shock.
16. OBJECT AND LIQUID ENTRY
1. READ INSTRUCTIONS
Never push objects of any kind into this product through openings as they
may touch dangerous voltage points or short out parts that could result in
fire or electric shock. Never spill or spray any type of liquid on the product.
17. OUTDOOR ANTENNA GROUNDING
All the safety and operating instructions should be read before the
product is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS
All warnings on the product and in the operating instructions should be
adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
5. CLEANING
Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
6. ATTACHMENTS
If an outside antenna is connected to the product, be sure the antenna
system is grounded so as to provide some protection against voltage
surges and built-up static charges. Section 810 of the National Electric
Code, ANSI/NFPA 70, provides information with respect to proper
grounding of the mast and supporting structure, grounding of the lead-
in wire to an antenna discharge product, size of grounding conductors,
location of antenna discharge product, connection to grounding
electrodes, and requirements for grounding electrode.
Do not use attachments not recommended by the product's
manufacturer as they may cause hazards.
7. WATER AND MOISTURE
Do not use this product near water- for example, near a bathtub,
washbowl, kitchen sink, or laundry tub, in a wet basement, or near a
swimming pool.
8. ACCESSORIES
Do not place this product on an unstable cart, stand, tripod, bracket, or
table. The product may fall, causing serious injury and serious damage to
the product. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer or sold with the
product. Any mounting of the product should follow the
PORTABLE CART WARNING
(symbol provided by RETAC)
manufacturer’s instructions, and should use a mounting
accessory recommended by the manufacturer.
8A. An appliance and cart combination should be moved
with care. Quick stops, excessive force, and uneven
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
surfaces may cause the appliance and cart
18. SERVICING
combination to overturn.
9. VENTILATION
Do not attempt to service this product yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer
all servicing to qualified service personnel.
Slots and openings in the cabinet and in the back or bottom are
provided for ventilation and to ensure reliable operation of the product
and to protect it from overheating. These openings must not be blocked
or covered. The openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surface. This product
should never be placed near or over a radiator or heat source. This
product should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or the
manufacturer's instructions have been adhered to.
19. REPLACEMENT PARTS
When replacement parts are required, be sure the service technician
uses replacement parts specified by the manufacturer or those that
have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other hazards.
20. SAFETY CHECK
Upon completion of any service or repairs to this product, ask the
service technician to perform safety checks to determine that the
product is in proper operating condition.
10. POWER SOURCES
This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your appliance dealer or local power
company. For products intended to operate from battery power, or
other sources, refer to the operating instructions.
21. WALL OR CEILING MOUNTING
The product should be mounted to a wall or ceiling only as
recommended by the manufacturer.
22. DAMAGE REQUIRING SERVICE
Unplug the product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
11. GROUNDING OR POLARIZATION
This product is equipped with a polarized alternating-current line plug
(a plug having one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the polarized plug.
12. POWER-CORD PROTECTION
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions, as an adjustment o other controls may result
in damage and will often require extensive work by a qualified
technician to restore the product to its normal operation.
e. If the product has been dropped or the cabinet has been damaged.
Power-supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience receptacles, and the
point where they exit from the appliance.
f.
When the product exhibits a distinct change in performance - this
indicates a need for service.
13. LIGHTNING
23. HEAT
The product should be situated away from heat sources such as
radiators, heat registers, stoves, or other products (including amplifiers)
that produce heat.
24. NOTE TO CATV SYSTEM INSTALLER
To protect your product from a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line surges.
14. POWER LINES
This reminder is provided to call the CATV system installer's attention
to Article 820-40 of the NEC that provides guidelines for proper
grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point
of cable entry as practical.
An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where it
can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be fatal.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS8502.IT.O/M.QXD 7/17/03 9:44 AM Page 4
LOCATION OF CONTROLS
1. Video Camera with
Camera Focus Adjusting
Ring
FRONT
1
2. Monitor Screen
3. POWER Button
4. Left Speaker (Side of Unit)
5. CD Compartment
6. CDG Indicator
16
7. CD Track Display
8. REPEAT Indicator
9. REPEAT Button
10. MAIN VOLUME Control
11. Stop (■) Button
2
12. Skip/Search
Button
13. MONITOR Switch
(CD/CDG/CAMERA/AUX)
14. BALANCE Control
15. MIC1 Jack
16. Carrying Handle (Rear of
Unit)
17. CD Door OPEN/CLOSE
Button
18. Right Speaker (Side of
Unit)
19. PLAY/PAUSE Indicator
20. PROGRAM Indicator
21. PROGRAM Button
22. MIC 1&2 VOLUME Control
23. Play/Pause ( ) Button
3
4
5
17
18
6
7
8
19
20
21
22
9
10
11
12
23
24
13
25
26
27
14
15
28
24. Skip/Search
Button
25. ECHO Control
26. AC Cord (Rear of Unit)
27. AVC (Auto Voice) Control
28. MIC2 Jack
REAR JACK PANEL
29. Right AUDIO IN Jack
30. VIDEO IN Jack
31. Right AUDIO OUT Jack
32. VIDEO OUT Jack
33. CONTRAST Control
34. V-HOLD Control
35. Left AUDIO IN Jack
36. CDG/CAMERA Switch
37. Left AUDIO OUT Jack
38. BRIGHT Control
29
30
35
36
37
31
32
33
34
38
4
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS8502.IT.O/M.QXD 7/17/03 9:44 AM Page 5
POWER SOURCE
AC:
Use the AC polarized line cord included with the unit for
operation on AC power. Insert into a conveniently located AC
outlet having 120V, 60Hz.
NOTE: The AC plug supplied with the unit is polarized to help
minimize the possibility of electric shock. If the AC plug does
not fit into a nonpolarized AC outlet, do not file or cut the wide
blade. It is the user’s responsibility to have an electrician
replace the obsolete outlet.
OPTIONAL CONNECTIONS
If you are using special CD+G (Graphics) discs in this portable Karaoke system, you can connect this unit to
an external television set in order to see the On Screen Graphics that are recorded on CD+G Karaoke discs
on an external TV, as well as the built-in monitor. To see the on screen graphics recorded on the CD+G, make
sure the CDG/CAMERA switch on the rear of the unit is set to the CDG position.
The video cable has yellow RCA type plugs on each end. Please note that your TV set must have an RCA
type Video Input jack in order to view the CD+G lyrics on your TV screen. You cannot connect this
COMPACT
portable Karaoke system to your TV’s coaxial antenna terminal.
DIGITAL AUDIO
GRAPHICS
Also note that On Screen lyrics are only available on special Karaoke compact discs that bear the
CD+G mark.
Many newer TV sets have a set of Video and Stereo Audio jacks on the front panel for quick and easy
connections without having to turn the TV set to gain access to the jacks on the back panel. If your TV set has
such front panel A/V jacks, we suggest that you use those jacks to connect your portable Karaoke.
After connecting the Video Out jack on this portable Karaoke to the Video In jack on your TV with the included
video cable, you have the following three choices:
1. Listen to the sound from the built-in speakers in this portable Karaoke system. In this case, no external
audio connections are required.
2. If your TV has stereo audio input jacks, you can connect the Audio Out jacks on the back of this unit to the
Audio In jacks on your TV. The stereo audio connection cable is included. In this case, the lyrics from the
CD+G disc will appear on your TV screen and/or monitor and the sound from the disc will be heard from
your TV speakers.
KARAOKE UNIT
From
Video
Out
From
Audio
Out
To video
In
To
Audio In
TELEVISION
5
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS8502.IT.O/M.QXD 7/17/03 9:44 AM Page 6
OPTIONAL CONNECTIONS (CONTINUED)
Note: If you have a mono TV with only one Audio In jack, you may have to purchase a “Y” adapter (stereo
to mono) at your local electronics accessories store in order to combine the Left and Right stereo channels
from this portable Karaoke to a single mono channel for connection to your mono TV.
3. You can connect the Audio Out jacks from this portable Karaoke to the Aux In or Audio In jacks of your
home stereo system to hear the sound through your home stereo speakers. Follow the instructions for your
home stereo system to select the device connected to the external jacks as the audio source.
KARAOKE UNIT
From
Video
Out
From
Audio
Out
To
video
in
TELEVISION
RECEIVER OR HOME STEREO
To
Audio In
6
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS8502.IT.O/M.QXD 7/17/03 9:44 AM Page 7
CONNECTIONS (CONTINUED)
CONNECTING AN EXTERNAL AUDIO UNIT
KARAOKE UNIT
Rotate the MONITOR switch to
the AUX position when
connecting the unit as per this
step.
To
Audio In
EXTERNAL AUDIO SOURCE
From
Audio
Out
NOTES:
• Connecting the unit to an external audio source will allow you to broadcast the external unit’s sound through the
MKS8502’s speakers.
• When connecting the external unit, refer to the owner’s manual of the external unit, as well as this manual.
• When connecting the external unit, make sure the power is off and both units are unplugged before making any
connections.
CONNECTING AN EXTERNAL VIDEO UNIT
KARAOKE UNIT
Rotate the MONITOR switch to
the AUX position when
To video
In
connecting the unit as per this
step.
EXTERNAL VIDEO SOURCE
From
Video Out
NOTES:
• Connecting the unit to an external video source will allow you to see the external unit’s video through the
MKS8502’s monitor.
• When connecting the external unit, refer to the owner’s manual of the external unit, as well as this manual.
• When connecting the external unit, make sure the power is off and both units are unplugged before making any
connections.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS8502.IT.O/M.QXD 7/17/03 9:44 AM Page 8
OPERATION
CONNECTING THE MICROPHONE
This unit has two microphone jacks which will allow you to sing along with your favorite songs. Before
connecting, make sure the MIC VOLUME controls are set to minimum.
CDG/CAMERA SWITCH
ECHO CONTROL
MIC ON/OFF SWITCH
(REAR)
1
1
1
Rotate the ECHO control clock-
wise to increase the echo or
counterclockwise to decrease
the echo.
When connected to an external
TV, slide this switch to the
CAMERA position to see the
image from the camera on the
external TV. During playback of a
CD+G disc, slide to the CDG
position to see the song’s lyrics
on the external TV.
To turn the microphone on, slide
the ON/OFF switch, located on
the side of the microphone, to
the ON position. To turn the
microphone off, slide the
ON/OFF switch to the OFF
position. For the sound effect
microphone, please refer to
pages 15 and 16.
NOTE: During playback of a CD or CD+G disc, the camera's images can still be observed on an external
TV if the CDG/CAMERA switch on the rear of the unit is set to the CAMERA position.
BALANCE CONTROL
AUTO VOCAL CONTROL (AVC)
1
When the vocal feature is activated, the vocals on a multiplex
recording are muted as soon as the singer begins singing into
the microphone. When the singer stops singing, the vocals are
automatically unmuted. Adjust the AVC control for the best
balance between playback and microphone levels.
NORMAL PLAYBACK:
Rotate the BALANCE control
clockwise to decrease the left
speaker’s sound or counter-
clockwise to decrease the right
speaker’s sound.
IMPORTANT: This feature only works with multiplex CDs.
KARAOKE PLAYBACK:
Rotate the BALANCE control
clockwise to decrease the music
sound or counterclockwise to
decrease the vocal sound level.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS8502.IT.O/M.QXD 7/17/03 9:44 AM Page 9
OPERATION (CONTINUED)
PLAYING COMPACT DISCS
NORMAL PLAYBACK
(For karaoke, please refer to page 13.)
1
2
3
Press the POWER button to turn Rotate the MONITOR switch to Press the CD Door OPEN/
the unit on.
CLOSE button to open the CD
compartment door. Place a CD in
the compartment, with the printed
label side facing up. Press the CD
Door OPEN/CLOSE button to
close the CD compartment door.
the CD position.
4
5
6
The CD player will read the table
of contents on the disc and the
total number of tracks on the disc
will appear in the display.
Adjust the MAIN VOLUME control
as desired. Playback will continue
until all of the tracks on the disc
have been played.
Press the Play/Pause ( )
button to begin playback on
Track 1; the PLAY/PAUSE
indicator will light.
7
8
9
To stop playback before the disc After the last track has been Remove your disc, press the CD
ends, press the Stop (■) button. played, the disc stops auto- Door OPEN/CLOSE button to
matically and the display shows close the CD Compartment door
the total number of tracks on the and press the POWER button to
disc. If you are finished listening, turn the unit off.
press the CD Door OPEN/CLOSE
The disc will stop and the display
will show the total number of
tracks.
button to open the CD
Compartment door.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS8502.IT.O/M.QXD 7/17/03 9:44 AM Page 10
OPERATION (CONTINUED)
CD PAUSE CONTROL
1
2
During CD playback, if you wish
to pause the disc momentarily,
press the Play/Pause ( )
button. Playback stops but the
disc continues to spin and the
PLAY/PAUSE indicator will blink.
Press the Play/Pause ( ) button
again to release pause and resume
normal CD playback; the
PLAY/PAUSE indicator will light.
TO BEGIN PLAYBACK FROM A SPECIFIC TRACK
1
2
2
1
After you insert the disc into the CD
player and the total number of tracks
appear on the display, you may press
When the desired track number
blinks in the display, within five
seconds, press the Play/Pause
( ) button. Play-back will begin
on the track you selected.
either the Skip/Search (
) ❷ button to select a specific
track for playback.
) ❶ or
(
FORWARD/REVERSE SKIP TRACK AND HIGH-SPEED MUSIC SEARCH (
/
)
1
2
3
CD ONLY
During playback, depress and
hold either the Skip/Search (
or ( ) button to move the player
)
forward or backward within a
track to locate a specific musical
passage. The player will move
forward or backward at high
speed as long as the button is
depressed. When you release the
During playback, press the During playback, press the
Skip/Search ( ) button once to Skip/Search ( ) button once to
advance the player to the move the player back to the
beginning of the next track. Press beginning of the current track. Press
Skip/Search (
) or (
) button,
the Skip/Search (
) button the Skip/Search (
) button
normal playback will resume.
repeatedly to advance the player repeatedly to move the player back
to higher numbered tracks.
to lower numbered tracks.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS8502.IT.O/M.QXD 7/17/03 9:44 AM Page 11
OPERATION (CONTINUED)
REPEAT PLAYBACK
1
2
3
1
1
1
2
2
2
To repeat a single track, press the To repeat all of the tracks on a To cancel Repeat Playback,
REPEAT button ❶ once; the disc continuously, press the press the REPEAT button ❶ until
REPEAT button ❶ twice; the
) ❷ or REPEAT indicator will light solid. You can also cancel Repeat
REPEAT indicator will blink.
Press the Skip/Search (
the REPEAT indicator goes out.
Playback by pressing the Stop
(
) button ❸ to select the Press the Play/Pause ( )
(■) button ❷.
button ❷ to repeat all tracks.
specific track that you wish to
repeat. When the desired track
number blinks in the display,
within five seconds, press the
PLAY/PAUSE ( ) button ❹ to
begin playback. The specific track
you selected will be repeated
continuously.
PROGRAMMED PLAYBACK
The CD player in this unit has a 20 track programmable memory that allows you to program up to 20 tracks
on any disc for playback in any desired order. You may program 20 different tracks or you may also program
certain tracks to play more than once.
To perform programmed playback, proceed as follows:
1
2
3
1
2
Press the CD Door OPEN/ CLOSE
Press the POWER button ❶ to
turn the unit on. Rotate the
MONITOR switch ❷ to the CD
position.
Press the PROGRAM button; “0”
will blink in the display and the
PROGRAM indicator will blink.
button
to
open
the
CD
Compartment door and insert your
disc in the CD player. Press the CD
Door OPEN/CLOSE button to close
the CD compartment door. Wait for
the CD player to read the table of
contents and display the total
number of tracks on the disc.
CONTINUED ON THE NEXT PAGE
11
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS8502.IT.O/M.QXD 7/17/03 9:44 AM Page 12
OPERATION (CONTINUED)
4
5
6
2
2
2
1
1
1
Press the Skip/Search (
) ❶ or Press either the Skip/Search (
)
Repeat step 5 until you have
❶ or ( ) button ❷ to select the programmed the desired track
(
) button ❷ to select the first
numbers into the CD Program
Memory.
track that you wish to program. next track you wish to program.
When the desired track number When the desired track number
When the memory is full, “- -” will
appear in the display.
appears in the display, press the
PROGRAM button ❸ again.
appears in the display, press the
PROGRAM button ❸ again.
Press the Play/Pause ( ) button ❶ to begin programmed playback.
The PROGRAM indicator will blink and playback will begin on the first
track that you programmed. The player will continue to play all of the
tracks that you programmed in the order in which you programmed
them. When the last programmed track has been played, the player
will stop and the display will again show the total number of tracks on
the disc. If you press the PROGRAM button ❷ and then press the
7
2
1
Play/Pause ( ) button ❶ again, playback will start on the first track
you programmed and will continue until all the programmed tracks
have been played.
To cancel programmed playback, while in the Stop mode, press the PROGRAM button followed by the
Stop (■) button or open the CD Door.
To check the programmed tracks, while in the Stop mode, press the PROGRAM button repeatedly to view
the programmed tracks.
PROGRAMMED REPEAT
1
2
3
It is also possible to use the
Program and Repeat functions
together to repeat a specific
program indefinitely. First, program
the tracks you wish to hear in the
order you wish to hear them, as
described above. Then, press the
REPEAT button twice. The
PROGRAM indicator will blink and
and the REPEAT indicator will light.
Programmed Repeat operation
will continue indefinitely until you
press the Stop (■) button or open
the CD door.
Press the Play/Pause ( )
button to begin programmed
repeat playback. The player will
play the tracks you selected in the
order in which you programmed
them. When the last track in the
program has been played, the
entire program will begin again.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS8502.IT.O/M.QXD 7/17/03 9:44 AM Page 13
OPERATION (CONTINUED)
PLAYING A CD+G (COMPACT DISC + GRAPHICS) DISC KARAOKE
You can listen to a CD+G karaoke disc. CD+G discs combine the recorded music with an additional video
track that displays the song lyrics on this monitor. As the song plays, the words to be sung are highlighted in a
different color on most CD+Gs.
1
2
3
2
1
1
Insert a CD+G disc. Insert the
microphone into the MIC jack(s)
❶ and rotate the MONITOR
Adjust the AVC control as
button to start CD/CD+G described below.
Press the Play/Pause ( )
switch ❷ to the CDG position. playback; the CDG indicator will Slide the CDG/CAMERA switch
light and the image and lyrics will (rear of the unit) to the CDG
You can connect the unit to a TV
or TV and stereo as shown on
pages 5 and 6.
appear on the monitor.
position to see the CD+G lyrics
on the external TV.
When the vocal feature is
activated, the vocals on a
multiplex recording are muted as
soon as the singer begins singing
into the microphone. When the
singer stops singing, the vocals
are automatically unmuted. Adjust
the AVC control for the best
balance between playback and
microphone levels.
4
1
2
Adjust the MIC VOLUME control ❶ as desired. Increasing this control
will increase the volume of the microphone. Adjust the ECHO control ❷
to add an echo effect to your voice. The ECHO control ❷ is variable so
add as much or as little reverb as desired. Sing or talk into the
microphone and you will hear both the CD+G and the microphone.
IMPORTANT: This feature only
works with multiplex CDs.
NOTE: The Program and Repeat features on a CD+G CD operate the same as with standard CD.
INFORMATION ABOUT CD+G KARAOKE DISCS:
CD+G Karaoke discs are designed specifically for playback in special CD players that include a CD+G decoder, such as
this unit. These discs contain the lyrics to each song and the lyrics will appear on your TV screen, line by line, as the disc
is playing. Usually the words on the screen will change color in time with the music to help you sing along at the proper
tempo, even if you do not know the song.
Most CD+G Karaoke discs have all of the songs recorded twice, first with music only, and then with music and vocal
together. For example, if you purchase a CD+G disc containing four songs, tracks one through four will have the music
only without vocals, and tracks five through eight will have the same four songs recorded with music on the left channel
and the vocal tracks on the right channel.
If you wish to sing along “solo” without any other vocals, you should select tracks one through four (for example). If you
wish to sing a “duet” or be part of a group, select tracks five through eight (for example) that contain both the music and
vocals.
NOTE: Make sure the BALANCE control is set to the center position so you can hear both the vocal and music tracks at
an equal level.
MICROPHONE FEEDBACK:
“Feedback” is a howling or screeching sound that occurs when the microphone comes too close to the speaker(s). To
avoid microphone feedback, keep the microphone as far away from the speakers as the microphone cable will allow. If
you must bring the microphone close to the speakers, such as when you are changing a disc or adjusting one of the
other controls on the front of the unit, set the microphone ON/OFF switch to the OFF position.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS8502.IT.O/M.QXD 7/17/03 9:44 AM Page 14
OPERATION (CONTINUED)
USING THE BUILT-IN CAMERA
1
2
3
Rotate the MONITOR switch to When connected to an external Open the camera compartment.
the CAMERA position.
TV, slide the CDG/CAMERA The camera will then show the
switch to the CAMERA position to image on the built-in screen.
see the image from the camera on Rotate the Camera Focus
the external TV.
Adjusting Ring located on the
outside of the lens to adjust the
camera’s focus.
NOTE: When the MONITOR switch is in the CAMERA position, you can still playback a CD.
ADJUSTING THE PICTURE
When watching a CD+G on the monitor screen, adjust the brightness, v-hold and contrast as follows:
V-HOLD
CONTRAST
BRIGHTNESS
If the picture moves up and down
or rolls, rotate to adjust the
vertical hold.
If the picture is too light or too
dark, rotate to adjust the
brightness.
If the picture is too strong or too
weak, rotate to adjust the contrast
and clearly define the shades of
blacks, grays and whites.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS8502.IT.O/M.QXD 7/17/03 9:44 AM Page 15
MICROPHONE
BATTERY INSTALLATION:
–
–
+
+
Remove the Battery Compartment cover on the
back of the microphone by pressing down on the
tab and lifting the cover off. Insert four (4) AAA”
cell batteries (not included), observing the battery
polarity indicated inside the compartment.
Replace the Battery Compartment cover.
–
–
+
+
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed
batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline, Carbon-zinc and Rechargeable) or old batteries with
fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible
battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery
manufacturer’s directions.)
LOCATION OF CONTROLS
1. Microphone
2. BASS DRUM/SNARE DRUM/CRASH/
1
CRASH-CYMBAL Buttons
3. LAUGHTER Button
4. RHYTHM Buttons
5. Battery Compartment (Rear of Unit)
2
6. APPLAUSE Button
7. RHYTHM Buttons
8. STOP Button
9. VOICE CHANGER Buttons
10. MIC/OFF/ON Switch
3
6
7
4
8
9
10
5
15
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS8502.IT.O/M.QXD 7/17/03 9:44 AM Page 16
MICROPHONE (CONTINUED)
OPERATION
1
2
3
2
Slide the MIC/OFF/ON switch to
the MIC position to use the
1
1
microphone as
microphone.
Slide the MIC/OFF/ON switch to
the ON position to take advantage
of the microphone’s sound
effects.
a
standard
Insert the microphone into
Microphone 1 or 2 jack ❶ and
press the POWER button ❷ on
the main unit..
Press the LAUGHTER button to
hear the laughter sound.
4
5
6
1
1
Press the APPLAUSE button to Press one of the RHYTHM Press the BASS DRUM, SNARE
hear the an audience applause buttons ❶ to start a rhythm. To DRUM, or CRASH/CRASH-
sound.
CYMBAL button to make the
respective sound.
stop the rhythm, press the STOP
button ❷.
7
8
9
Press one of the VOICE
CHANGER
button,
then Adjust the MIC VOLUME control
Slide the MIC/OFF/ON switch to
the OFF position to turn the
microphone off.
speak/sing into the microphone to as desired.
hear the various voice effects.
Press the VOICE CHANGER
buttons repeatedly to select the
desired voice effects.
NOTE: When the MIC/OFF/ON
button is turned Off and then On
again, the voice effects will
return to the original setting.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS8502.IT.O/M.QXD 7/17/03 9:44 AM Page 17
CARE AND MAINTENANCE
Caring for Compact Discs
• Treat the compact disc carefully. Handle the compact disc
only by its edges. Never allow your fingers to come in contact
with the shiny, unprinted side of the compact disc.
• Do not attach adhesive tape, stickers, etc. to the compact
disc label.
• Clean the compact disc periodically with a soft, lint-free, dry
cloth. Never use detergents or abrasive cleaners to
clean the compact disc. If necessary, use a CD
cleaning kit.
• If a compact disc skips or gets stuck on a section of the
compact disc, it is probably dirty or damaged
(scratched).
• When cleaning the compact disc, wipe in straight lines
from the center of the compact disc to the outer edge
of the disc. Never wipe in circular motions.
A
Z
• This unit is designed to play only compact discs bearing the identification logo as shown here.
Other discs may not conform to the CD standard and may not play properly.
• Compact discs should be stored in their cases after each use to avoid damage.
• Do not expose compact discs to direct sunlight, high humidity, high temperatures, or dust, etc.
Prolonged exposure or extreme temperatures can warp the compact disc.
• Do not stick or write anything on either side of the compact disc. Sharp writing instruments, or the ink may
damage the surface.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS8502.IT.O/M.QXD 7/17/03 9:44 AM Page 18
TROUBLESHOOTING GUIDE
Should this unit exhibit a problem, check the following before seeking service:
Symptom
POSSIBLE SOLUTION
CD PLAYER
CD Player will not play.
CD skips while playing.
GENERAL
CD is not installed or inserted upside-down - install correctly.
Disc is dirty or scratched, replace disc.
No sound.
Power cord disconnected, reconnect.
Some vocals are still
present when AVC is Off.
Feedback is heard when
singing.
Using non CD+G CD. Insert a CDG to get this feature.
Backup vocals are supposed to be included.
Microphone too close to unit or volume is too high.
MONITOR
Words do not appear on the Using non CD+G CD. Insert a CDG to get this feature.
TV screen.
Make sure the MONITOR switch is set to the CDG position.
Make sure the CDG/CAMERA switch is set to the CDG position
(external TV only).
Picture too light or dark.
Picture weak or fuzzy.
Picture rolls or jumps.
CAMERA
Adjust BRIGHT control.
Adjust CONTRAST control.
Adjust V-HOLD control.
Camera not working.
Make sure the MONITOR switch is set to the CAMERA position.
Make sure the CDG/CAMERA switch is set to the CAMERA
position (external TV only).
18
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS8502.IT.O/M.QXD 7/17/03 9:44 AM Page 19
SPECIFICATIONS
GENERAL:
Power Source .............................................................................................120V, 60Hz AC
Speaker ...............................................................................................Impedance 8 Ohms
Dimensions...................................................................XX (W) x XX (H) x XX4 (D) Inches
Weight.......................................................................................................................XX lbs
Output Power...............................................................................................7W@10%THD
CD SECTION:
Disc Diameter..............................................................................................4.72” (120mm)
.....................................................................................................3.15” (80mm) Single CD
Optical Source...................................................................................Semiconductor Laser
Wavelength ..............................................................................................................780nm
D/A Conversion................................................................................................................xx
Specifications are subject to change without notice.
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE AT
WWW.MEMOREXELECTRONICS.COM
OR CONTACT CUSTOMER SERVICE AT 1-800-919-3647.
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO
RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX.
FOR PARTS AND ACCESSORIES, CONTACT FOX INTERNATIONAL AT 1-800-321-6993.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS8502.IT.O/M.QXD 7/17/03 9:44 AM Page 20
Memcorp, Inc.
Weston, FL
Printed in Hong Kong
Download from Www.Somanuals.com. All Manuals Search And Download.
|