OWNER’S MANUAL
MANUEL D'INSTRUCTIONS
20" MTS STEREO COLOR TELEVISON
TÉLÉVISEUR COULEUR, STÉRÉO ET
MTS DE 20 POUCES
MT1120A
ATTENTION
ATTENTION
For your protection in the event of theft or loss of this product, please fill in the information
listed below which is for your own personal records.
Pour votre protection en cas de vol ou de perte de l'appareil, veuillez inscrire ci-dessous les
renseignements demandés.
Date of Purchase
Date d'achat
:
:
:
:
:
:
Serial No.
Numéro de série
Place of Purchase
Lieu d'achat
TV/CATV MODE SELECTION
SÉLECTION DU MODE TV/CATV
When shipped from the factory, the TV/CATV menu option is set to the "CATV" (Cable Televi-
sion) mode. If not using CATV, set this menu option to "TV " mode.
Lorsque l'appareil sort de l'usine, l'option du menu TV/CATV est en mode "CATV"
(câblodistribution).
Si vous n'utilisez pas la câblodistribution, choisissez l'option "TV".
Before operating the unit, please read this manual thoroughly.
Avant de mettre cet appareil en marche, veuillez lire attentivement ce manuel.
3G81501A E
1
12/8/99, 10:11 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
13. LIGHTNING
To protect your unit during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line
surges.
14. POWER LINES
An outside antenna system should not be located in the vicinity of overhead power lines, or other electric light or power circuits,
or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken
to keep from touching such power lines or circuits as contact with them might be fatal.
15. OVERLOADING
Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
16. OBJECT AND LIQUID ENTRY
Do not push objects through any openings in this unit as they may touch dangerous voltage points or short out parts that could
result in fire or electric shock. Never spill or spray any type of liquid into the unit.
17. OUTDOOR ANTENNA GROUNDING
If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded so as to
provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/
NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
18. SERVICING
Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
19. DAMAGE REQUIRING SERVICE
Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the unit.
c . If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by
the operatingin structions, as an improper adjustment of other controls may result in damage and will often require extensive
work by a qualified technician to restore the unit to its normal operation.
e. If the unit has been dropped or the cabinet has been damaged.
f . When the unit exhibits a distinct change in performance, this indicates a need for service.
20. REPLACEMENT PARTS
When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or
those that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
21. SAFETY CHECK
Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the
unit is in proper operating condition.
22. WALL OR CEILING MOUNTING
The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
23. HEAT
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including
amplifiers) that produce heat.
24. NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building,
as close to the point of cable entry as practical.
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE
ANTENNA LEAD IN WIRE
GROUND CLAMP
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
GROUNDING CONDUCTORS (NEC
SECTION 810-21)
EQUIPMENT
GROUND CLAMPS
NEC-NATIONAL ELECTRICAL CODE
S2898A
POWER SERVICE GROUNDING ELECTRODE
SYSTEM (NEC ART 250, PART H)
3
3G81501A E
3
12/8/99, 10:11 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
• 181 Channel Tuner - The tuning system is capable of receiving all 68 VHF/UHF standard broadcast channels that
are available in your area. When operating on a cable system, it can tune to the standard VHF channel frequencies
plus up to 113 cable channel frequencies. The actual number of channels received depends upon channel
reception in your area or your cable system.
• On-Screen 3 Language Display - Consists of channel, sleep timer, volume level, muting, text/caption indicators
and picture control adjustments. These can be displayed in English, Spanish or French.
• Sleep Timer - Operable from the remote control, this TV can be programmed up to 120 minutes to turn off
automatically.
• Memory Back Up - This system prevents loss of memorized channel selections in case a power interruption to the
TV should occur.
• V-Chip - The V-Chip function can rate a TV program or movie content. It allows you to set a restriction level.
• Picture Control Adjustments - The On-Screen display allows precise remote control adjustment of
BRIGHTNESS, COLOR, CONTRAST, SHARPNESS and TINT.
• Closed Captioned Decoder - Displays text captions or 1/2 of full screen text on the screen for hearing impaired
viewers.
• Stereo/SAP Reception - This TV designed to receive stereo and separate audio program (SAP) broadcasts where
available.
LOCATION OF CONTROLS
FRONT
BACK
OUT
IN
VIDEO
MONO
L
AUDIO
R
6
7
8 9
POWER
VOLUME
CHANNEL
VIDEO IN L–AUDIO IN–R
(MONO)
REMOTE SENSOR
1
2
3
4
5
1.POWER Button - Press to turn the TV on or off.
2.VOLUME ▲ / ▼ Buttons - Press to raise or lower
the volume of the sound.
3.CHANNEL ▲ / ▼ Buttons - Press to select a higher
or lower numbered channel set into memory.
4.Remote Sensor - Signals from the Remote Control
unit are received here.
5. AUDIO (L / R) / VIDEO IN Jacks - Audio and video
signal cables from an external source can be
connected here.
6. AC Power Cord - Plug into an outlet haveing 120V,
60 Hz AC power only.
7. VHF/UHF IN (ANT) Jack - Connect a VHF/UHF
antenna or CATV cable to this jack.
8. AUDIO (L / R) /VIDEO OUT Jacks - Used to output
audio and video signals to a TV, amplifier or VCR.
9. AUDIO (L / R) /VIDEO IN Jacks - Audio and video
signal cables form an external source can be
connected hear.
4
3G81501A E
4
12/8/99, 10:11 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
5. SLEEP Button - To set the TV to turn off after a preset
amount of time, press the SLEEP button on the remote
control. The clock will count down 10 minutes each time
the button is pressed in the order of 120, 110, 100, ······
20, 10, 0. After the sleep time is programmed, the
display will disappear then reappear momentarily every
ten minutes to remind you the sleep timer function is
operating. To confirm the sleep time setting, press the
SLEEP button once and the remaining time will be
momentarily displayed. To cancel sleep time, press the
SLEEP button repeatedly until the display turns to 0.
6. MENU Button - Press to display the On-Screen menu
function.
POWER
TV/AV
10
1
1
5
9
2
3
7
4
6
0
8
11
12
2
3
QUICK
VIEW
CALL
VOL
CH
MUTING
7. SET + / – Buttons - Press to select the desired setting
during On-Screen operations.
4
5
6
13
SLEEP
8. RESET Button - Press to reset the On-Screen picture
adjustments to their factory preset positions. Press to
reset a password in the V-CHIP Password setting mode.
9. AUDIO SELECT Button - Switches sound between
mono and stereo, and SAP when receiveing broadcasts
in stereo or SAP.
MENU
SET
ENTER
14
15
16
AUDIO
RESET SELECT
TV
CH.1/2
7
8
CAPTION/TEXT
10. TV/AV Button - Switches between TV and external
inputs.
9
11. QUICK VIEW Button - This button allows you to go
back to the previous channel selected by just pressing
the QUICK VIEW button. Press this button again to return
to the channel you were watching.
12. CALL Button - When you press this button, the channel
number tuned will appear on the upper right corner of
the screen. Press the button again to remove display
from the screen.
13. CH (CHANNEL) ▲ / ▼ Buttons - Press the ▲ button to
change to a higher numbered channel set into memory.
Press the ▼ button to change to a lower numbered
channel set into memory.
14. ENTER Button - Press to enter or select information for
On-Screen operations.
15. CH.1/2 Button - Switches between Channel 1and
Channel 2 in the Closed Caption mode.
1. POWER Button - Press to turn the TV on. Press again
to turn the TV off.
2. Direct Channel Selection Buttons (0-9) - Allows direct
access to any channel.
3. MUTING Button - To turn off the sound, press this
button once. The TV will be silenced and the symbol
"MUTING" will appear on the screen. The muting feature
can be released by pressing the MUTING button again
or one of the VOL ▲ or ▼ button.
16. TV/CAPTION/TEXT Button - Press this button to switch
between normal TV and the two Closed Caption modes
(captions and 1/2 of full screen text). Closed Captioning
will display text on screen for hearing impaired viewers.
4. VOL (VOLUME) ▲ / ▼ Buttons - Press the ▲ button to
increase, or the ▼ button to decrease the volume level.
Before using the remote control, batteries must first be installed into it.
HOW TO INSTALL BATTERIES
1. Open the battery compartment cover.
Use two "AAA" size batteries. The batteries may last
approximately one year depending on how much the remote
control is used. For best performance, it is recommended
that batteries should be replaced on a yearly basis, or when
the remote operation becomes erratic. Do not mix old and
new batteries or different types.
BATTERY PRECAUTIONS
These precautions should be followed when using batteries
in this device:
2. Install two "AAA" batteries.
• Use only the size and type of batteries specified.
• Be sure to follow the correct polarity when installing the
batteries as indicated in the battery compartment.
Reversed batteries may cause damage to the device.
• Do not mix different types of batteries together (e.g.
Alkaline and Carbon-zinc) or old batteries with fresh ones.
• If the device is not to be used for a long period of time,
remove the batteries to prevent damage or injury from
possible battery leakage.
3. Replace the battery compartment cover.
• Do not try to recharge batteries not intended to be re-
charged; they can overheat and rupture. (Follow battery
manufacturer's directions.)
5
3G81501A E
5
12/8/99, 10:11 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
ANTENNA/CATV CONNECTIONS
Combination VHF/UHF Antenna
This television has an
extended tuning range and can
tune most cable channels
Single 75 ohm Cable
without using a cable company
supplied converter box. Some
cable companies offer
"premium pay channels" in
which the signal is scrambled.
Descrambling these signals for
normal viewing requires the
use of a descrambler device
which is generally provided by
the cable company.
300 ohm Twin-lead Wire
Take off the Splitter
Splitter
300-75 ohm
OUT
IN
UHF Antenna
VIDEO
MONO
L
Matching Transformer
AUDIO
R
(not supplied)
300 ohm Twin-lead Wire
Separate VHF/UHF Antennas
VHF Antenna
Connect the 75 ohm Cable from the VHF antenna and the UHF
antenna Twin-lead to a combiner (not supplied). Attach the Combiner
to the Antenna Jack.
Single 75 ohm Cable
NOTE: If your VHF antenna has a Twin-lead Wire, use the 300-75
ohm Matching Transformer (not supplied), then connect the
Transformer to the Combiner.
300 ohm Twin-lead Wire
Combiner
(not supplied)
300-75 ohm
For Subscribers to Basic Cable TV Service
For basic cable service not requiring a Converter/Descrambler box,
connect the CATV 75 ohm Coaxial Cable directly to the Antenna
Jack on the back of the television.
Incoming CATV
Matching Transformer
(not supplied)
Converter/Descrambler
Converter/Descrambler
For Subscribers to Scrambled Cable TV Service
If you subscribe to a cable service which requires the use of a
Converter/Descrambler box, connect the incoming cable to the
Converter/Descrambler box and connect the output of the box to the
Antenna Jack on the back of the television. Follow the connections
shown left. Set the television to the output of the Converter/
Descrambler box (usually channel 3 or 4) and use the Converter/
Descrambler box to select channels.
A
Splitter
A/B Switch
B
Combination VHF/UHF Antenna (Single 75 ohm Cable or
300 ohm Twin-lead Wire)
Connect the 75 ohm cable from a combination VHF/UHF antenna to
the Antenna Jack. If your combination antenna has a 300 ohm
Twin-lead Wire, use the 300-75 ohm Matching Transformer (not
supplied).
For Subscribers to Unscrambled Basic Cable with
Scrambled Premium Channels
If you subscribe to a cable service in which basic cable channels
are unscrambled and premium channels require the use of a
Converter/Descrambler box, you may wish to use a two-set signal
splitter (sometimes called a "two-set coupler") and an A/B Switch
box from the cable installer or an electronics supply store. Follow
the connections shown left. With the switch in the "B" position, you
can directly tune any nonscrambled channels on your TV. With the
switch in the "A" position, tune your TV to the output of the Converter/
Descrambler box (usually channel 3 or 4) and use the box to tune
scrambled channels.
Combination VHF/UHF Antenna (Separate VHF and UHF
300 ohm Twin-leads)
Connect the UHF Twin-lead Wire to a Combiner (not supplied).
Connect the VHF Twin-lead to the 300-75 ohm Matching
Transformer (not supplied). Attach the Transformer to the Combiner.
Attach the Combiner to the Antenna Jack.
AUDIO/VIDEO JACK CONNECTIONS
The exact arrangement you use to interconnect various video and audio components to the TV is dependent on the model and features of
each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs.
The connection diagrams in the following are offered as suggestions. You may need to modify them to accommodate your particular
assortment of components. The diagrams are intended to show component video and audio interconnections only.
Press the TV/AV selector button to select the AV mode to use the TV as a monitor.
Operate your VCR as usual.
2. To connect the TV to a TV Game
The TV can also be used as a display device for many video
games. However, due to the wide variety of different types of signal
generated by these devices and subsequent hook-up variations
required, they have not all been included in the suggested
connection diagrams. You'll need to consult each component's
Owner's Manual for additional information.
TV/AV SELECTION
If you connect the TV to VCR, camcorder or TV game, you can
select by pressing the TV/AV button.
Press the TV/AV button repeatedly to select the desired mode.
"AUX1" or "AUX2" will display on the screen for 4 seconds.
To Audio/Video OUT
AUX 1
Front of TV
TV
AUX 1
AUX 2
TV GAME
VIDEO IN L–AUDIO IN–R
(MONO)
1. To connect the TV to a VCR
(Not Supplied)
Rear of TV
VIDEO
VCR
3. To connect the TV to the camcorder
To playback from the camcorder, connect the camcorder to the
TV as shown.
OUT IN
Front of TV
AUDIO (L)
AUDIO (R)
To AV OUT jack
To Audio/Video
OUT
VIDEO IN L–AUDIO IN–R
(MONO)
(Not supplied)
6
(Not Supplied)
3G81501A E
6
12/8/99, 10:12 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING LANGUAGE
This TV can display the channel number, on screen displays and picture adjustments on the screen in English, Spanish or
French.
On-screen language selection (step 3) will automatically appear on the screen when you press the MENU button initially.
Select language to use the other menu options.
Press the MENU button.
Press the SET + or – button until
the " " indicator points to the
desired language: English
(ENGLISH), Spanish
(ESPAÑOL) or French
(FRANCAIS), then press the
MENU
CH SET
3
1
2
LANGUAGE / IDIOMA / LANGUE
ENGLISH
ESPAÑOL
FRANCAIS
PICTURE
AUDIO
LANGUAGE
V-CHIP SET
/ ENTER / MENU
Press the SET + or – button to
select the LANGUAGE mode,
then press the ENTER button.
⟨
+
–
⟩
/
⟨
+
–
⟩
/
/ ENTER / MENU
ENTER button.
Press the MENU button again.
4
NOTE:
If Spanish or French is chosen, the Closed Caption indicators will be in the selected language, but the Closed Caption text
will not be affected by the language selection.
TV OPERATION
Direct Channel Selection buttons (0-9)
To turn on the TV, press the POWER button.
1
2
Press these buttons to select a channel. The channel
number will appear on the upper right corner of the TV
screen. If an invalid channel number is selected, the display
will revert to the original channel.
The VOLUME can be adjusted to a desired level by
pressing the VOL (VOLUME) ▲ or ▼ button.
The sound level will be indicated on the TV screen by
green bars and a number. As the sound level in-
creases, so do the number of bars and the number on
the screen. The same is true for decreasing the level.
TV Mode Direct Channel Selection
When the TV/CATV menu option is in the TV position, all
channels can be instantly selected by using two buttons.
(For example, to select channel 2, press "0", then "2". If you
press only "2", channel selection will be delayed for a few
seconds). For channels 10 and above, press the 2 digits in
order.
Set the TV/CATV menu option to the appropriate
position. When shipped from the factory, this menu
option is in the CATV setting. See "TO MEMORIZE
CHANNELS".
3
4
CATV Mode Direct Channel Selection
When the TV/CATV menu option is in the CATV position,
channels can be selected as follows:
TV
- VHF/UHF channels
CATV - CABLE TV channels
CH. 1-9
Press "0" twice, then 1-9 as needed.
Example, to select channel 2, press
"002".
Press "0", then remaining 2 digits.
Example, to select channel 13, press
"013".
Press the 2 digits in order.
Example, to select channel 36, press
"36".
CH (CHANNEL) ▲ and ▼ buttons
Press and release the CH (CHANNEL) ▲ or ▼ button.
The channel automatically stops at the next channel
set into memory. Press and hold the button down to
change channels more quickly.
CH. 10-19
CH. 20-99
For proper operation, before selecting channels,
they should be set into the TV's memory.
See "TO MEMORIZE CHANNELS".
CH. 100-125 Press the 3 digits in order.
Example, to select channel 120, press
"120".
NOTE: If the station being viewed stops broadcasting, the
TV will automatically shut off after 15 minutes.
7
3G81501A E
7
12/8/99, 10:12 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
TO MEMORIZE CHANNELS
This TV is equipped with a channel memory feature which
allows channels to skip up or down to the next channel set
into memory, skipping over unwanted channels.
AUTOMATIC CHANNEL MEMORY
MENU
CH SET
PICTURE
Press the MENU button.
1
Before selecting channels, they must be programmed into
the TV's memory. In addition to normal VHF and UHF
channels, this TV can receive up to 113 Cable TV channels.
To use this TV with an antenna, set the TV/CATV menu
option to the TV setting. When shipped from the factory, this
menu option is in the CATV setting.
AUDIO
LANGUAGE
V-CHIP SET
/ ENTER / MENU
Press the SET + or – button until the
indicator next to "CH SET" begins to
flash, then press the ENTER button.
2
⟨
+
–
⟩
/
Press the SET + or – button until the
indicator next to "AUTO CH
MEMORY" begins to flash, then press
the ENTER button. The TV will begin
memorizing all the channels available
in your area.
3
TV
CATV
TV/CATV SELECTION
AUTO CH MEMORY
ADD / DELETE
Press the MENU button.
1
⟨
+
–
⟩
/
/ ENTER / MENU
MENU
Press the SET + or – button until the
indicator next to "CH SET" begins to
2
CH SET
PICTURE
AUDIO
LANGUAGE
V-CHIP SET
flash, then press the ENTER button.
Press the MENU button twice to
return to normal TV viewing.
4
⟨
+
–
⟩
/
/ ENTER / MENU
Press the SET + or – button until the
indicator next to "TV/CATV" begins
to flash.
3
4
TO ADD/DELETE CHANNELS
MENU
CH SET
PICTURE
Press the MENU button.
1
AUDIO
TV
CATV
LANGUAGE
V-CHIP SET
/ ENTER / MENU
Press the ENTER button to select
the TV or CATV mode. The arrow
indicates the selected mode.
Press the SET + or – button until the
indicator next to "CH SET" begins to
flash, then press the ENTER button.
AUTO CH MEMORY
ADD / DELETE
2
⟨
+
–
⟩
/
⟨
+
–
⟩
/
/ ENTER / MENU
TV
CATV
Press the SET + or – button until the
Press the MENU button twice to
return to normal TV viewing.
5
3
AUTO CH MEMORY
ADD / DELETE
indicator next to "ADD/DELETE"
begins to flash, then press the
ENTER button.
The chart below is typical of many cable system channel
allocations.
⟨
+
–
⟩
/
/ ENTER / MENU
CATV CHART
Select the desired channels to be
memorized or deleted using the Direct
Channel Selection buttons (10 keys,
4
Number on this TV
Corresponding CATV channel
14
A
32
S
15
B
33
T
16
C
34
U
17
D
35
V
18
E
36
W
19
F
37
20
G
38
21
H
39
22
I
40
23
J
24
K
25
L
26
M
27
N
45
II
28
O
46
JJ
29
P
47
30
Q
48
31
R
49
AA BB CC DD
55
41
42
43
44
50
51
52
53
54
56
57
58
0-9), the CH ▲ or ▼ button or the
SET + or – button.
EE FF GG HH
KK LL MM
65
NN OO PP QQ RR SS TT UU VV
59
60
61
62
63
64
66
67
68
III
86
86
69
70
71
72 73
74
75
76
WW AAA BBB CCC DDD EEE FFF GGG HHH
JJJ KKK LLL MMM NNN OOO PPP QQQ
77
78
96
79
97
80
98
81
82
83
84
85
87
87
88
88
89
89
90
90
91
91
92
92
93
93
94
94
RRR SSS TTT UUU VVV WWW XXX YYY ZZZ
95
99 100 101 102 103
104 105 106 107 108 109 110 111 112
104 105 106 107 108 109 110 111 112
122 123 124 125 01
122 123 124 125 5A
Press the ENTER button to select ADD or DELETE.
If an unmemorized channel was selected (step 4), the
channel indication will be red. Press the ENTER button
if you wish to ADD the unmemorized channel. The
channel indicator will change from red to green when a
channel is added and the channel will be memorized.
If a memorized channel was selected (step 4), the
channel indication will be green.
5
A-5 A-4 A-3 A-2 A-1 100 101 102 103
113 114 115 116 117 118 119 120 121
113 114 115 116 117 118 119 120 121
NOTE: Contact your cable company to determine the
type of cable system used in your area.
Press the ENTER button if you wish
to DELETE the channel from memory.
ADD
CH 012
The channel indicator will change
from green to red when a channel is
deleted.
⟨
+
–
⟩
/
/ ENTER / MENU
Repeat Steps 4 and 5 for each
channel to be added or deleted.
Press the MENU button three times after adding or
deleting all of the desired channels, to return to normal
TV viewing.
6
8
3G81501A E
8
12/8/99, 10:12 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING V-CHIP
This TV is fitted with a V-CHIP controller which provides you with channel viewing access controls and restrictions. This
function is to prevent your children from watching violence or sexual scenes that may be harmful.
Press the MENU button and press the SET + or –
button to select the V-CHIP SET option, then press the
1
TV RATING
SET –
TV-Y7
SET +
TV-PG
ENTER button.
OFF
TV–Y
TV-G
TV-14
TV-MA
Enter your password using the Direct channel selection
buttons.
2
In the event of entering incorrect password press the
RESET button. Then press the ENTER button.
TV-Y : all children
TV-Y7 : 7 years old and above TV-14 : 14 years old and above
TV-G : childrens program
TV-MA : 17 years old and above
TV-PG : parental guidance
Enter the same password for confirmation, then press
the ENTER button.
3
4
When you select TV-Y7, TV-PG, TV-14 or TV-MA, press the CALL
button to show the contained rating.
Press the SET + or – button to select the desired item you want.
Press the SET + or – button to select the V-CHIP
option.
Press the ENTER button to select the ON.
Press the ENTER button to select the OFF.
MOVIE RATING
Press the SET + or – button to select the TV RATING
or MOVIE RATING option. Press the ENTER button.
5
6
SET –
SET +
R
OFF
G
PG
PG-13
R
NC-17
X
Press the SET + or – button to select the desired rating
for the applicable video or TV channel. Press the
ENTER button.
: under 17 years old
parental guidance
suggested
G
: all ages
PG
: parental guidance
Press the MENU button twice to return to normal TV
viewing.
7
PG-13 : parental guidance
NC-17 : 17 years old and above
: adult only
less than 13 years old
X
NOTES:
• The V-Chip function is activated only on programs and tapes that have the rating signal.
• Once you block a program using the V-Chip function, the blocked program cannot be watched based on the content of the
show. When the program starts, the "ENTER PASSWORD" will appear on the screen. When you want to release the
V-Chip temporarily, enter the password.
If you change the channel or turn off and on the TV while releasing the V-Chip temporarily, the V-Chip setting will be resumed.
• When you watch the TV from the cable box or the VCR with the RF Modulator, then you release the V-Chip temporarily,
the V-Chip setting will not be resumed until you turn off the TV. The TV channel is not used in this case.
• When changing the channel with the cable box or the VCR, approximately 10 seconds will pass until the program appears.
CLOSED CAPTION
WHAT IS CLOSED CAPTIONING?
Text: The Text Closed Caption Mode will usually fill 1/2 of full
This television has the capability to decode and display Closed screen with a programming schedule or other information. After
Captioned television programs. Closed Captioning will display selecting a Closed Caption Mode, it will stay in effect until it is
text on the screen for hearing impaired viewers or it will translate changed, even if the channel is changed. If the Captions signal
and display text in another language.
is lost due to a commercial or a break in the signal, the
Captions will reappear when the signal is received again. If the
channels are changed, the Captions will be delayed
approximately 10 seconds.
TO VIEW CLOSED CAPTIONS
Press the TV/CAP/TEXT button on the remote control to switch
between normal TV and the two Closed Caption Modes
(Captions and 1/2 of Full Screen Text).
The Captions will appear in places on the screen where they
will least interfere with the picture, usually on the bottom of the
screen. News programs will usually show three-line Closed
Captions which scroll onto the screen. Most other shows
provide two or three lined Captions placed near the character
who is speaking so the viewer can follow the dialogue. Words in
italics or underlined describe titles, words in foreign languages
or words requiring emphasis. Words that are sung usually
appear enclosed by musical notes. For television programs
broadcasting with Closed Captions, look in your TV guide for
the Closed Captions symbol (CC).
Captions: This Closed Caption Mode will display text on the
screen in English or another language (depending on the
setting of the Closed Captions CH. 1/2 button). Generally,
Closed Captions in English are transmitted on Captions
Channel 1 and Closed Captions in other languages are
transmitted on Captions Channel 2.
• When activating the Closed Captioned Decoder, there will be a short delay before the Closed Captioned text appears on the
screen.
• Closed Captioned text is only displayed in locations where it is available.
• If no caption signal is received, no captions will appear, but the television will remain in the Caption Mode.
• Misspellings or unusual characters may occasionally appear during Closed Captioning. This is normal with Closed Captioning,
especially with live programs. This is because during live programs, captions are also entered live. These transmissions do not
allow time for editing.
• When Captions are being displayed, on-screen displays, such as volume and mute may not be seen or may interfere with Closed
Captions.
• Some cable systems and copy protection systems may interfere with the Closed Captioned signal.
• If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder may not appear or may appear with
strange characters or misspelled words. In this case, adjust the antenna for better reception or use an outdoor antenna.
9
3G81501A E
9
12/8/99, 10:12 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
STEREO AND SEPARATE AUDIO PROGRAM (SAP)
The TV is equipped with a feature known as Multi-channel TV
Sound or MTS. MTS broadcasts greately enhance TV viewing
by bringing you programs with high fidelity stereo sound.
MTS also provides an extra channel called the Separate
Audio Program or SAP which broadcasters can use to
transmit a second language for bilingual transmission or for
other purposes.
LISTENING TO SAP (SEPARATE AUDIO PROGRAM)
When the TV is turned on or a channel selection is made,
make certain the SAP is appeared on the screen. This means
that the "Separate Audio Program" broadcasting is available.
TO SELECT DESIRED SOUND
Press the AUDIO SELECT button to select the desired sound.
LISTENING TO STEREO SOUND
MONO+SAP BROADCASTING
When the TV is turned on or a channel selection is made,
make certain the STEREO is appeared on the screen. This
means that "Stereo" broadcasting is available. You can enjoy
stereo sound from the left and right speakers.
MAIN SOUND
(MONO)
MAIN + SAP SOUND
(MONO)
SAP SOUND
• When the "Mono" broadcasting is received, no indication is STEREO+SAP BROADCASTING
displayed.
MAIN SOUND
(STEREO)
SAP SOUND
• If the broadcast signal is not strong enough or clear stereo
sound is not available, press the AUDIO SELECT button
to change to mono sound. The noise should be eliminated.
Press it again to return to the stereo sound.
MAIN SOUND
(MONO)
MAIN + SAP SOUND
(MONO)
SOUND ADJUSTMENTS
Sound controls are factory preset but you can adjust them
individually as follows:
To display sound adjustments on the screen, press the
MENU button. Press the SET + or – button to select the AUDIO
option, then press the ENTER button.
BALANCE
Press the ENTER button until “BALANCE” appears on the
screen, then press the SET + or – button to obtain an equal
sound level from both speakers.
RESET
BASS
Pressing the RESET button while making sound
adjustments will return all adjustments to the factory
preset levels.
Press the ENTER button until “BASS” appears on the screen,
then press the SET + or – button to adjust the bass sound.
TREBLE
NOTE: The on-screen display will disappear 6 seconds after
finishing an adjustment or by pressing the CALL
button. The settings can only be adjusted when
they are displayed on the TV screen.
Press the ENTER button until “TREBLE” appears on the screen,
then press the SET + or – button to adjust the treble sound.
ADJUSTING PICTURE
You can adjust the settings for color, sharpness, contrast,
brightness and tint.
Press the SET + or – button to adjust the setting.
4
+
–
Press the MENU button.
1
increase brightness
increase contrast
be brilliant color
be greenish color
decrease brightness
decrease contrast
be pale color
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
Press the SET + or – button until the indicator next to
"PICTURE" begins to flash, then press the ENTER
button.
2
be reddish color
makes picture clearer makes picture softer
3
Press the ENTER button repeatedly to select the item
you want to adjust.
TO RETURN TO INITIAL SETTING
Press the RESET button while the picture adjusting mode
appears on-screen.
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
10
3G81501A E
10
12/8/99, 10:12 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING GUIDE
Before requesting service, please refer to the following chart for the symptom and possible solution.
SYMPTOMS
POSSIBLE SOLUTIONS
SYMPTOMS
POSSIBLE SOLUTIONS
• Make sure the power cord is plugged in.
• Try another AC outlet.
• Power is off, check fuse or circuit breaker.
• Unplug unit for an hour, then plug it back in.
• Check all CATV connections.
• Set TV/CATV menu option to the CATV mode.
• Station or CATV system problems, try another
station.
No CATV
reception
TV does not
operate
Horizontal or • Check antenna connections, reorient antenna.
• Station or CATV experiencing problems, tune
to another station.
• Check sound adjustments (Volume and
Muting).
Poor sound
or No sound
• Check for sources of possible interference.
diagonal bars
on screen
• Make sure TV/CATV menu option is in the
appropriate mode.
No reception
above
• Check for sources of possible interference.
• If using antenna, check UHF antenna
connections.
channel 13
• Station or CATV experiencing problems, tune
to another station.
• Check antenna or CATV connections, reorient
antenna.
• Check for sources of possible interference.
• Check picture control adjustments.
Poor picture
or No picture
• Batteries are weak, dead or inserted
incorrectly.
• Remote is out of range, move closer to TV
within 15 feet.
No Remote
operation
• Make sure Remote is aimed at sensor.
• Confirm there are no obstructions between the
Remote and the TV.
• Station or CATV experiencing problems, tune
to another station.
• Station signal is weak, reorient antenna to
receive weaker station.
Poor recep-
tion on some
channels
• Make sure the power cord is plugged in.
• Check for sources of possible interference.
• No broadcast on station tuned.
• Sleep Timer is set.
• Power interrupted.
TV shuts off
• Station or CATV experiencing problems, tune
to another station.
• Make sure channels are set into memory.
• Check picture control adjustments.
• Check antenna or CATV connections, reorient
antenna.
• TV station experiencing problems or program
tuned is not closed captioned. Try another
channel.
• Check CATV connection or VHF/UHF antenna,
reposition or rotate antenna.
Poor color or
no color
Closed -
Caption is
not activated.
• Check for sources of possible interference.
• Press TV/CAPTION/TEXT button to turn on
the closed caption decoder.
• Station or CATV experiencing problems, tune
to another station.
• Make sure channels are set into memory.
• CATV company is scrambling signal.
• Check antenna orientation.
Picture
wobbles
or drifts
Display is not
shown in your
language.
• Select proper language in the menu options.
SPECIFICATIONS
AC Power Input:
120 V, 60 Hz
95W
IC Solid state
Receiving Channels:
AC Power Consumption:
Chassis Construction:
Picture Tube:
VHF
UHF
CATV
2-13
14-69
20" (measured diagonally)
2.5 + 2.5 W
01-97 (5A)-(A-3)
98-99 (A-2)-(A-1)
14-22 (A)-(I)
Audio Power Output Rating:
Speaker:
Tuner Type: 181 Channel, Quartz PLL Frequency Synthesized
Remote Control: 2 x AAA batteries (not included)
6-1/3" x 2-1/4" Full Range, 32 ohm x 2
23-36 (J)-(W)
37-65 (AA)-(FFF)
66-125 (GGG)-(125)
75 ohm (VHF/UHF/CATV)
Coaxial Input
Antenna Input Impedance:
Dimensions:
Weight:
23-5/8" (W) x 17-9/16" (H) x 18-7/8" (D)
46.3 Ibs
ACCESSORY: Remote Control
11
3G81501A E
11
12/8/99, 10:12 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
Memcorp Canada, warrants this product to be free from manufacturing defects in material and workmanship under
normal use and conditions for a designated period from date of original purchase in Canada as follows: (Unless
otherwise specified)
WARRANTY:
• COLOUR TV’s BELOW 25":
2 Years Parts, 90 Days Labour,
4 Years Picture Tube
• COLOUR TV’s 25" and above:
1 Year Parts, Labour,
4 Years Picture Tube
• ALL TV/VCR AND TV/VCR COMBINATION:
1 Year Parts (6 Months Video Heads),
90 Days Labour, 4 Years Picture Tube
• ALL VCR’s AND VCP’s:
1 Year Parts (6 Months Video Heads),
90 Days Labour
Should service be necessary under this warranty for any reason due to manufacturing defect during the warranty
period, Memcorp Canada will repair or replace (at its discretion) the defective merchandise at no charge.
THIS UNIT CAN BE REPAIRED ONLY AT THE MEMCORP CANADA SERVICE CENTERS OR AT THE AUTHORIZED
SERVICE DEPOTS (THE ADDRESS OF THE NEAREST DEPOT IS AVAILABLE BY CALLING 905-940-0560).
NOTE: This warranty is void if the product is:
(a)Damaged through negligence, misuse, abuse, or accident.
(b)Used in a commercial application or rentals.
(c) Modified or repaired by anyone other than Memcorp Canada Service Centers or the authorized Service
Depots.
(d)Damage caused by improper connection to other equipment.
(e)If the original proof of purchase cannot be supplied.
NOTE: This warranty does not cover:
(a)Damage to the tape or tape cartridge (if applicable).
(b)Cleaning of video heads (if applicable).
(c) Damage occured or costs incurred in the shipping of the product to Memcorp Canada Service Centers or
the authorized Service Depots.
(d)Ordinary adjustments to the product which can be performed by customer as outlined in the owner’s
manual.
(e)Signal reception problems caused by external antenna, cable systems or interference.
(f) Incompatibility due to the change in TV/CATV broadcast systems after the product was sold.
THIS WARRANTY IS NON-TRANSFERABLE AND APPLIES ONLY TO THE ORIGINAL PURCHASER AND DOES
NOT EXTEND TO SUBSEQUENT OWNERS OF THE PRODUCT. ANY APPLICABLE IMPLIED WARRANTIES,
INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED IN DURATION TO APERIOD OF THE
EXPRESSED WARRANTY AS PROVIDED HEREIN BEGINNING WITH THE DATE OF ORIGINAL PURCHASE
AT RETAIL AND NO WARRANTIES, WHETHER EXPRESSED OR IMPLIED, SHALL APPLY TO THIS PRODUCT
THEREAFTER.
UNDER NO CIRCUMSTANCES SHALL MEMCORP CANADA BE LIABLE FOR ANY LOSS, DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGE ARISING OUT OF, OR IN CONNECTION WITH THE
USE OF THIS PRODUCT.
THIS WARRANTY IS VALID ONLY FOR PRODUCTS SOLD AND DISTRIBUTED THROUGH MEMCORP
CANADA (AND ITS DEALER NETWORKS).
MEMCORP CANADA
106 FERRIER ST.
MARKHAM, ONTARIO L3R2Z5
(905) 940-0560
3G81501A E
12
12/8/99, 10:12 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
3G81501A E
13
12/8/99, 10:12 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
|