Mazda5_8AU7-EA-09H_Edition1 Page1
Wednesday, July 8 2009 11:26 AM
Black plate (1,1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page3
Wednesday, July 8 2009 11:26 AM
Black plate (3,1)
AWord to Mazda Owners
Thank you for choosing a Mazda. We at Mazda design and build vehicles with complete
customer satisfaction in mind.
To help ensure enjoyable and trouble-free operation of your Mazda, read this manual
carefully and follow its recommendations.
An Authorized Mazda Dealer knows your vehicle best. So when maintenance or service is
necessary, that's the place to go.
Our nationwide network of Mazda professionals is dedicated to providing you with the best
possible service.
We assure you that all of us at Mazda have an ongoing interest in your motoring pleasure
and in your full satisfaction with your Mazda product.
Mazda Motor Corporation
HIROSHIMA, JAPAN
Important Notes About This Manual
Keep this manual in the glove box as a handy reference for the safe and enjoyable use of your Mazda. Should you
resell the vehicle, leave this manual with it for the next owner.
All specifications and descriptions are accurate at the time of printing. Because improvement is a constant goal at
Mazda, we reserve the right to make changes in specifications at any time without notice and without obligation.
Event Data Recorder
This vehicle is equipped with an event data recorder. In the event of a crash, this device records data related to
vehicle dynamics and safety systems for a short period of time. These data can help provide a better
understanding of the circumstances in which crashes and injuries occur and lead to the designing of safer
vehicles.
Air Conditioning and the Environment
Your Mazda's genuine air conditioner is filled with HFC134a (R134a), a refrigerant that has been found not to
damage the earth's ozone layer. If the air conditioner does not operate properly, consult an Authorized Mazda
Dealer.
Perchlorate
Certain components of this vehicle such as [air bag modules, seat belt pretensioners, lithium batteries, ...] may
contain Perchlorate Material– Special handling may apply for service or vehicle end of life disposal. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
Please be aware that this manual applies to all models, equipment and options. As a result, you may find
some explanations for equipment not installed on your vehicle.
©2009 Mazda Motor Corporation
Printed in Japan Aug. 2009(Print1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page4
Wednesday, July 8 2009 11:26 AM
Black plate (4,1)
How to Use This Manual
We want to help you get the most driving
pleasure from your vehicle. Your owner's
manual, when read from cover to cover,
can do that in many ways.
NOTE
A NOTE provides information and sometimes
suggests how to make better use of your
vehicle.
The symbol below, located on some parts
of the vehicle, indicates that this manual
contains information related to the part.
Please refer to the manual for a detailed
explanation.
Illustrations complement the words of the
manual to best explain how to enjoy your
Mazda. By reading your manual, you can
find out about the features, important
safety information, and driving under
various road conditions.
The symbol below in this manual means
“Do not do this” or “Do not let this
happen”.
Index: A good place to start is the Index,
an alphabetical listing of all information
in your manual.
You'll find several WARNINGs,
CAUTIONs, and NOTEs in the manual.
WARNING
A WARNING indicates a situation in
which serious injury or death could
result if the warning is ignored.
CAUTION
A CAUTION indicates a situation in
which bodily injury or damage to
your vehicle, or both, could result if
the caution is ignored.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page5
Wednesday, July 8 2009 11:26 AM
Black plate (5,1)
Table of Contents
Interior, exterior views and part identification of your Mazda.
Use of safety equipment, including seats, seat belt system, child-restraint
systems and SRS air bags.
Explanation of basic operations and controls; opening/closing and adjustment
of various parts.
Important information about driving your Mazda.
Explanation of instruments and controls.
Use of various features for drive comfort, including air-conditioning and audio
system.
Helpful information on what to do in an emergency.
How to keep your Mazda in top condition.
Important consumer information including warranties and add-on equipment.
Technical information about your Mazda.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page6
Wednesday, July 8 2009 11:26 AM
Black plate (6,1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page9
Wednesday, July 8 2009 11:26 AM
Black plate (9,1)
Your Vehicle at a Glance
Dashboard and Interior Overview
MT shift lever .................................................................................................... page 5-10
AT shift lever (Sport AT) ................................................................................... page 5-12
Vanity mirror ...................................................................................................... page 6-65
Navigation system (if equipped) .......................................... Refer to the separate manual
The equipment and installation position varies by vehicle
1-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page11
Wednesday, July 8 2009 11:26 AM
Black plate (11,1)
Your Vehicle at a Glance
Exterior Overview
The equipment and installation position varies by vehicle
1-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page12
Wednesday, July 8 2009 11:26 AM
Black plate (12,1)
1-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page13
Wednesday, July 8 2009 11:26 AM
Black plate (13,1)
Essential Safety Equipment
2
Use of safety equipment, including seats, seat belt system, child-restraint
systems and SRS air bags.
Seats ............................................................................................... 2-2
íSome models.
2-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page14
Wednesday, July 8 2009 11:26 AM
Black plate (14,1)
Essential Safety Equipment
Seats
qSeat Slide
Front Seats
WARNING
Adjust the driver's seat only when the
vehicle is stopped:
WARNING
Do not modify or replace the front
seats:
Adjusting the driver's seat while the
vehicle is moving is dangerous. The
driver could lose control of the vehicle
and have an accident.
Modifying or replacing the front seats
such as replacing the upholstery or
loosening any bolts is dangerous. The
front seats contain air bag
components essential to the
supplemental restraint system. Such
modifications could damage the
supplemental restraint system and
result in serious injury. Consult an
Authorized Mazda Dealer if there is
any need to remove or reinstall the
front seats.
To move a seat forward or backward, raise
the lever and slide the seat to the desired
position and release the lever.
Do not drive with damaged front seats:
Driving with damaged front seats is
dangerous. A collision, even one not
strong enough to inflate the air bags,
could damage the front seats which
contain essential air bag
components. If there was a
subsequent collision, an air bag may
not deploy which could lead to
injuries. Always have an Authorized
Mazda Dealer inspect the front seats,
front seat belt pretensioners and air
bags after a collision.
Make sure the lever returns to its original
position and the seat is locked in place by
attempting to push it forward and
backward.
Make sure the adjustable components
of a seat are locked in place:
Adjustable seats and seatbacks that
are not securely locked are
dangerous. In a sudden stop or
collision, the seat or seatback could
move, causing injury. Make sure the
adjustable components of the seat
are locked in place by attempting to
slide the seat forward and backward
and rocking the seatback.
2-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page15
Wednesday, July 8 2009 11:26 AM
Black plate (15,1)
Essential Safety Equipment
Seats
Do not drive with the seatback
unlocked:
qSeat Recline
All of the seatbacks play an
WARNING
Do not drive with either front seat
reclined:
important role in your protection in a
vehicle. Leaving the seatback
unlocked is dangerous as it can allow
passengers to be ejected or thrown
around and baggage to strike
Sitting in a reclined position while the
vehicle is moving is dangerous
because you do not get the full
protection from seat belts. During
sudden braking or a collision, you
can slide under the lap belt and
suffer serious internal injuries. For
maximum protection, sit well back
and upright.
occupants in a sudden stop or
collision, resulting in severe injury.
After adjusting the seatback at any
time, even when there are no other
passengers, rock the seatback to
make sure it is locked in place.
To change the seatback angle, lean
forward slightly while raising the lever.
Then lean back to the desired position and
release the lever.
Always sit in the passenger seat
properly with the seatback upright and
feet on the floor:
Your front passenger seat has weight
sensors, sitting in the front passenger
seat improperly out of position or
with the seatback reclined too far
while the vehicle is moving is
dangerous as it can take off weight
from the seat bottom and affect the
weight determination of the front
passenger sensing system. As a result
the front passenger will not have the
supplementary protection of the air
bag and seat belt pretensioner, which
could result in serious injury. Always
sit upright against the seatback with
your feet on the floor.
Make sure the lever returns to its original
position and the seatback is locked in
place by attempting to push it forward and
backward.
2-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page16
Wednesday, July 8 2009 11:26 AM
Black plate (16,1)
Essential Safety Equipment
Seats
qArmrest
CAUTION
When returning a rear-reclined
seatback to its upright position,
make sure you hold onto the
The armrest can be used or placed upright.
seatback with your other hand while
operating the lever. If the seatback is
not supported, it will flip forward
suddenly and could cause injury.
q
Height Adjustment (Driver's Seat)
To adjust the seat height, move the lever
up or down.
Up
WARNING
Never position the shoulder portion of
a front seat belt over the armrest:
Positioning the shoulder portion of a
front seat belt over the armrest is
dangerous as it cannot provide
Down
adequate protection in a collision
and could result in serious injuries.
qLumbar Support Adjustment
(Driver's Seat)
Move the lever forwards to adjust the
lumbar support as required.
2-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page17
Wednesday, July 8 2009 11:26 AM
Black plate (17,1)
Essential Safety Equipment
Seats
Do not drive with the seatback
unlocked:
Second-Row Seats
All of the seatbacks play an
WARNING
Do not stack cargo higher than the
seatbacks:
important role in your protection in a
vehicle. Leaving the seatback
unlocked is dangerous as it can allow
passengers to be ejected or thrown
around and baggage to strike
Stacking luggage or other cargo
higher than the seatbacks is
dangerous. During a sudden stop or
collision, objects can fly around and
become projectiles that could hit and
injure passengers.
occupants in a sudden stop or
collision, resulting in severe injury.
After adjusting the seatback at any
time, even when there are no other
passengers, rock the seatback to
make sure it is locked in place.
Make sure luggage and cargo is
secured before driving:
Not securing cargo while driving is
dangerous as it could move or be
crushed during sudden braking or a
collision and cause injury.
Never allow a passenger to sit or stand
on the folded seatback while the
vehicle is moving:
Driving with a passenger on the
folded seatback is dangerous.
Allowing a child to sit up on the
folded seatback while the vehicle is
moving is particularly dangerous. In
a sudden stop or even a minor
collision, a child not in a proper seat
or child-restraint system and seat
belt could be thrown forward, back
or even out of the vehicle resulting in
serious injuries or death. The child in
the baggage area could be thrown
into other occupants and cause
serious injury.
Make sure the adjustable components
of a seat are locked in place by
attempting to slide the seat forward
and backward and rocking the
seatback:
Adjustable seats that are not securely
latched are dangerous. In a sudden
stop or collision, the seat or seatback
could move, causing injury.
Adjust the seat only when the vehicle is
stopped:
Adjusting the seat while the vehicle is
moving is dangerous. Sudden
braking or a collision could cause
serious injury.
NOTE
l
The second-row seats cannot be removed.
l
When returning a second-row seat to its
original position, also replace the seat belt
to its normal position. Verify that the seat
belt pulls out and retracts.
2-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page18
Wednesday, July 8 2009 11:26 AM
Black plate (18,1)
Essential Safety Equipment
Seats
qSeat Slide
qSeat Recline
To move the seat forward or backward,
raise the lever and slide the seat to the
desired position and release the lever.
WARNING
Do not drive with the seats reclined:
Sitting in a reclined position while the
vehicle is moving is dangerous
because you do not get the full
protection from the seat belts. During
sudden braking or a collision, you
can slide under the lap belt and
suffer serious internal injuries. For
maximum protection, sit well back
and upright.
Do not recline a second-row seatback
when the third row seat is occupied:
Reclining the second-row seatback
when the third-row seat is occupied
is dangerous.Because the clearance
in the third-row seat is limited,
occupants in the third-row seat could
be hurt seriously on a reclined
Make sure the lever returns to its original
position and the seat is locked in place by
attempting to push it forward and
backward.
second-row seatback.
To change the seatback angle, lean
forward slightly while raising the lever.
Then lean back to the desired position and
release the lever.
Make sure the lever returns to its original
position and the seatback is locked in
place by attempting to push it forward and
backward.
2-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page19
Wednesday, July 8 2009 11:26 AM
Black plate (19,1)
Essential Safety Equipment
Seats
qThird-Row Seat Access
CAUTION
When returning a rear-reclined
seatback to its upright position,
make sure you hold onto the
seatback with your other hand while
operating the lever. If the seatback is
not supported, it will flip forward
suddenly and could cause injury.
Passenger ingress
To reach the third-row seat, raise the lever
of the second-row seat. The seatback will
tilt forward.
qArmrest
The armrest can be used or placed upright.
After entering the vehicle, return the
seatback to its upright position.
Passenger egress
Pull the belt and fold the seatback
forward. The seatback will tilt forward.
WARNING
Never position the shoulder portion of
a second-row seat belt over the
armrest:
Positioning the shoulder portion of a
second-row seat belt over the
armrest is dangerous as it cannot
provide adequate protection in a
collision and could result in serious
injuries.
After exiting the vehicle, return the
seatback to its upright position.
2-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page20
Wednesday, July 8 2009 11:26 AM
Black plate (20,1)
Essential Safety Equipment
Seats
6. Raise the lever and fold the seatback
forward. Make sure the seatback is
secured by attempting to lightly move
it up and down.
qFolding the Second-Row Seats
To create a flat luggage compartment
space, lift the seat-bottoms of the second-
row seats and fold the seatbacks forward.
Folding the seatbacks
1. Insert the second-row outboard seat
belts in the retainers.
CAUTION
Ø When folding a seatback, always
hold onto the seatback with your
other hand while operating the
lever. If the seatback is not
2. Move the seat all the way back.
supported, it will flip forward
suddenly and could cause injury.
Ø When folding the seatback of the
right second-row seat, make sure
the storage box is stowed. If the
storage box is not stowed, it could
be damaged.
3. Lower the head restraint all the way
down (page 2-11).
4. Pull the strap and lift the end of the
seat-bottom up and forward.
5. If the armrest and storage box are in
the position for use, store them.
Refer to Storage Box on page 6-74.
2-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page21
Wednesday, July 8 2009 11:26 AM
Black plate (21,1)
Essential Safety Equipment
Seats
NOTE
Third-Row Seat
WARNING
Do not stack cargo higher than the
seatbacks:
To create a flat luggage compartment space
from the rear of the vehicle to the back of the
front seats, fold the second-row and third-row
seats (page 2-10).
Stacking luggage or other cargo
higher than the seatbacks is
dangerous. During a sudden stop or
collision, objects can fly around and
become projectiles that could hit and
injure passengers.
Make sure luggage and cargo is
secured before driving:
Not securing cargo while driving is
dangerous as it could move or be
crushed during sudden braking or a
collision and cause injury.
Returning seatbacks to their original
positions
Do not drive with the seatback
unlocked:
1. Return the seatback to its original
position while raising its lever.
Make sure the seatback is secured by
attempting to lightly move it forward
and back.
All of the seatbacks play an
important role in your protection in a
vehicle. Leaving the seatback
unlocked is dangerous as it can allow
passengers to be ejected or thrown
around and baggage to strike
occupants in a sudden stop or
collision, resulting in severe injury.
After returning the seatback at any
time, even when there are no other
passengers, rock the seatback to
make sure it is locked in place.
2. Return the seat-bottom to its original
position and secure it. After returning
the seat-bottom to its original position,
make sure the seat-bottom is secured
by attempting to lightly move it up and
down.
2-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page22
Wednesday, July 8 2009 11:26 AM
Black plate (22,1)
Essential Safety Equipment
Seats
Never allow a passenger to sit or stand
on the folded seatback while the
vehicle is moving:
2. Insert the third-row outboard seat belts
in the retainers.
Driving with a passenger on the
folded seatback is dangerous.
Allowing a child to sit up on the
folded seatback while the vehicle is
moving is particularly dangerous. In
a sudden stop or even a minor
collision, a child not in a proper seat
or child-restraint system and seat
belt could be thrown forward, back
or even out of the vehicle resulting in
serious injuries or death. The child in
the baggage area could be thrown
into other occupants and cause
serious injury.
3. Lower the head restraints all the way
down (page 2-11).
4. Pull the strap and fold the seatback
forward.
NOTE
l
The third-row seat cannot be removed.
l
When returning a third-row seat to its
original position, also replace the seat belt
to its normal position. Verify that the seat
belt pulls out and retracts.
qSplit-Folding the Third-Row
Seatback
To create a flat luggage compartment
space, fold the seatbacks forward.
To fold third-row seat
5. Lock the seatback in place by pushing
it down. Make sure the seatback is
secured by attempting to lightly move
it up and down.
1. Slide the second-row seat all the way
forward.
2-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page23
Wednesday, July 8 2009 11:26 AM
Black plate (23,1)
Essential Safety Equipment
Seats
NOTE
Head Restraints
To create a flat luggage compartment space
from the rear of the vehicle to the back of the
front seats, fold the second-row and third-row
seats (page 2-8).
Head restraints are intended to help
protect you and the passengers from neck
injury.
WARNING
Always drive with the head restraints
installed when seats are being used
and make sure they are properly
adjusted:
Driving with the head restraints
adjusted too low or removed is
dangerous. With no support behind
your head, your neck could be
seriously injured in a collision.
Height adjustment
To return third-row seat to its original
position
To raise a head restraint, pull it up to the
desired position.
To lower the head restraint, press the stop-
catch release, then push the head restraint
down.
Adjust the head restraint so that the top is
even with the top of the passenger's ears,
never the passenger's neck to prevent
injury.
Return the seatback to its original position
while pulling its strap.
Make sure the seatback is secured by
attempting to lightly move it forward and
back.
Front seat
2-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page24
Wednesday, July 8 2009 11:26 AM
Black plate (24,1)
Essential Safety Equipment
Seats
Second-Row seat
Seat Warmerí
The front seats are electrically heated. The
ignition switch must be in the ON
position.
Press the switch to turn the seat warmer
on or off. When the switch is in the ON
position, the indicator light will come on.
ON
OFF
Third-Row seat
Indicator
Removal/Installation
To remove the head restraint, pull it up
while pressing the stop-catch.
To install the head restraint, press the
uprights into the holes while pressing the
stop-catch.
WARNING
Always drive with the head restraints
set up when seats are being used and
make sure they are properly set up:
Driving with the head restraints not
set up is dangerous. With no support
behind your head, your neck could be
seriously injured in a collision.
2-12
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page25
Wednesday, July 8 2009 11:26 AM
Black plate (25,1)
Essential Safety Equipment
Seats
NOTE
WARNING
l
Use the seat warmer when the engine is
Ø Be careful when using the seat
warmer. The heat from the seat
warmer may be too hot for some
people, as indicated below, and
could cause a low-temperature
burn.
running, and do not continue to use it for a
long period of time.
The temperature of the seat warmer cannot
be adjusted beyond High and Low because
the seat warmer is controlled by a
thermostat.
l
Ø
Infants, small babies, elderly
people, and physically
challenged people
People with delicate skin
People who are excessively
fatigued
Ø
Ø
Ø
Ø
People who are intoxicated
People who have taken sleep-
inducing medicine such as
sleeping pills or cold medicine
Ø Do not use the seat warmer with
anything having high moisture-
retention ability such as a blanket
or cushion on the seat. The seat
may be heated excessively and
cause a low-temperature burn.
Ø Do not use the seat warmer even
when taking a short nap in the
vehicle. The seat may be heated
excessively and cause a low-
temperature burn.
Ø Do not place heavy objects with
sharp projections on the seat, or
insert needles or pins into it. This
could cause the seat to become
excessively heated and result in
injury from a minor burn.
CAUTION
Do not use organic solvents to clean
the seat. It may damage the seat
surface and the heater.
2-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page26
Wednesday, July 8 2009 11:26 AM
Black plate (26,1)
Essential Safety Equipment
Seat Belt Systems
Seat Belt Precautions
Seat belts help to decrease the possibility of severe injury during accidents and sudden
stops. Mazda recommends that the driver and all passengers always wear seat belts.
All of the seat belt retractors are designed to keep the lap/shoulder belts out of the way
when not in use.
The driver's seat belt has no provisions for child-restraint systems and has only an
emergency locking mode. The driver may wear it comfortably, and it will lock during a
collision.
However, the front passenger's seat and all rear lap/shoulder belt retractors operate in two
modes: emergency locking mode, and for child-restraint systems, automatic locking mode.
While we recommend you put all children in the rear seats, if you must use the front
passenger seat for a child, slide the front passenger seat as far back as possible and make
sure any child-restraint system is secured properly.
2-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page27
Wednesday, July 8 2009 11:26 AM
Black plate (27,1)
Essential Safety Equipment
Seat Belt Systems
WARNING
Always wear your seat belt and make sure all occupants are properly restrained:
Not wearing a seat belt is extremely dangerous. During a collision, occupants not
wearing seat belts could hit someone or things inside the vehicle or even be thrown
out of the vehicle. They could be seriously injured or even killed. In the same
collision, occupants wearing seat belts would be much safer.
Do not wear twisted seat belts:
Twisted seat belts are dangerous. In a collision, the full width of the belt is not
available to absorb the impact. This puts more force on the bones beneath the belt,
which could cause serious injury or death.
Never use one seat belt on more than one person at a time:
Using one seat belt for more than one person at a time is dangerous. A seat belt
used in this way cannot spread the impact forces properly and the two passengers
could be crushed together and seriously injured or even killed. Never use one belt for
more than one person at a time and always operate the vehicle with each occupant
properly restrained.
Do not operate a vehicle with a damaged seat belt:
Using a damaged seat belt is dangerous. An accident could damage the belt
webbing of the seat belt in use. A damaged seat belt cannot provide adequate
protection in a collision. Have an Authorized Mazda Dealer inspect all seat belt
systems in use during an accident before they are used again.
Have your seat belts changed immediately if the pretensioner or load limiter has
been expended:
One or both front air bags may deploy, and the corresponding pretensioner(s) may
also deploy at the same time. Like the air bags, the front seat belt pretensioners will
only function once. While it is safer to use a post-crash (a seat belt that was used in
an accident) than no front seat belt at all, using a front seat belt with an expended
pretensioner or load limiter loaded reduces the safety available to you. If the front
seat belt pretensioners are not replaced, the risk of injury in a collision will increase.
Expended front seat belt pretensioners and air bags must be replaced after any
collision which caused them to deploy. Additionally, the load limiter will only limit
loads on the chest once in a collision and this is another reason to have the front
seat belts inspected. Always have an Authorized Mazda Dealer inspect the front seat
belt pretensioners and air bags after any collision.
2-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page28
Wednesday, July 8 2009 11:26 AM
Black plate (28,1)
Essential Safety Equipment
Seat Belt Systems
CAUTION
Belt retraction may become difficult if the belts and rings are soiled, so try to keep
them clean. For more details about cleaning the seat belts, refer to “Cleaning the
Ring
qPregnant Women and Persons with Serious Medical Conditions
Pregnant women should always wear seat belts. Ask your doctor for specific
recommendations.
The lap belt should be worn SNUGLYAND AS LOWAS POSSIBLE OVER THE HIPS.
The shoulder belt should be worn across your shoulder properly, but never across the
stomach area.
Persons with serious medical conditions also should wear seat belts. Check with your
doctor for any special instructions regarding specific medical conditions.
qEmergency Locking Mode
In the emergency locking mode, the belt remains comfortable on the occupant and the
retractor will lock in position during a collision. When the seat belt is fastened, it will
always be in the emergency locking mode until it is switched to automatic locking mode by
pulling it all the way out to its full length. If the belt feels tight and hinders comfortable
movement while the vehicle is stopped or in motion, it may be in the automatic locking
mode because the belt has been pulled too far out. To return the belt to the more
comfortable emergency locking mode, wait until the vehicle has stopped in a safe, level
area, retract the belt fully to convert it back to emergency locking mode and then extend it
around you again.
If the belt is locked and cannot be pulled out, retract the belt once, and then try pulling it
out slowly. If this fails, pull the belt strongly one time and loosen, then pull it out again
slowly.
2-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page29
Wednesday, July 8 2009 11:26 AM
Black plate (29,1)
Essential Safety Equipment
Seat Belt Systems
qAutomatic Locking Mode
Always use the automatic locking mode to keep the child-restraint system from shifting to
an unsafe position in the event of an accident. To enable seat belt automatic locking mode,
pull it all the way out and connect it as instructed on the child-restraint system. It will
retract down to the child-restraint system and stay locked on it. See the section on child
restraint (page 2-25).
2-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page30
Wednesday, July 8 2009 11:26 AM
Black plate (30,1)
Essential Safety Equipment
Seat Belt Systems
Seat Belt
WARNING
Positioning the Shoulder Portion of the
Seat Belt:
qFastening the Seat Belt
Improper positioning of the shoulder
portion of the seat belt is dangerous.
Always make sure the shoulder
portion of the seat belt is positioned
across your shoulder and near your
neck, but never under your arm, on
your neck, or on your upper arm.
1. Grasp the seat belt tongue.
2. Slowly pull out the lap/shoulder belt.
Lap/shoulder
belt
4. Position the lap belt as low as possible,
not on the abdominal area, then adjust
the shoulder belt so that it fits snugly
against your body.
Seat belt
tongue
3. Insert the seat belt tongue into the seat
belt buckle until you hear a click
sound.
Take up slack
Keep low on
hip bone
Too high
Seat belt tongue
WARNING
Positioning the Lap Portion of the Seat
Belt:
Seat belt
buckle
The lap portion of the seat belt worn
too high is dangerous. In a collision,
this would concentrate the impact
force directly on the abdominal area,
causing serious injury. Wear the lap
portion of the belt snugly and as low
as possible.
2-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page31
Wednesday, July 8 2009 11:26 AM
Black plate (31,1)
Essential Safety Equipment
Seat Belt Systems
qUnfastening the Seat Belt
qFront Shoulder Belt Adjuster
Depress the button on the seat belt buckle.
If the belt does not fully retract, pull it out
and check for kinks or twists. Then make
sure it remains untwisted as it retracts.
Adjust the height of the shoulder belt if
the seat belt touches your neck, or if it
crosses your arm instead of your shoulder.
To raise the shoulder belt adjuster, push
the adjuster up. To lower the shoulder belt
adjuster, pull the knob and slide it down.
Make sure the adjuster is locked.
Button
NOTE
If a belt does not fully retract, inspect it for
kinks and twists. If it is still not retracting
properly, have it inspected at an Authorized
Mazda Dealer.
WARNING
Positioning the Shoulder Portion of the
Seat Belt:
To secure the outboard-rear row seat belts
when not in use, insert the belts into their
seat belt retainers.
Improper positioning of the shoulder
portion of the seat belt is dangerous.
Always make sure the shoulder
portion of the seat belt is positioned
across your shoulder and near your
neck, but never under your arm, on
your neck, or on your upper arm.
Seat belt
retainer
2-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page32
Wednesday, July 8 2009 11:26 AM
Black plate (32,1)
Essential Safety Equipment
Seat Belt Systems
Front Seat Belt Pretensioner
and Load Limiting Systems
WARNING
Wear seat belts only as recommended
in this owner's manual:
For optimum protection, the driver and
front passenger seat belts are equipped
with pretensioner and load limiting
systems. For both these systems to work
properly you must wear the seat belt
properly.
Incorrect positioning of the driver and
front passenger seat belts is
dangerous. Without proper
positioning, the pretensioner and
load limiting systems cannot provide
adequate protection in an accident
and this could result in serious injury.
For more details about wearing seat
belts, refer to “Fastening the seat
Pretensioners:
In moderate or severe frontal or near-
frontal accidents, the front air bag and
pretensioner systems deploy
simultaneously. The front seat belt
retractors remove slack quickly as the air
bags are expanding. Any time the air bags
and front seat belt pretensioners have fired
they must be replaced.
In addition, the pretensioner system for
the front passenger, like the front
passenger air bag, is designed to only
deploy in accordance with the total seated
weight on the front passenger seat.
For details, refer to the front passenger
seat weight sensors (page 2-44).
Have your seat belts changed
immediately if the pretensioner or load
limiter has been expended:
One or both front air bags may
deploy, and the corresponding
pretensioner(s) may also deploy at
the same time. Like the air bags, the
front seat belt pretensioners will only
function once. While it is safer to use
a post-crash (a seat belt that was
used in an accident) than no front
seat belt at all, using a front seat belt
with an expended pretensioner or
load limiter loaded reduces the safety
available to you. If the front seat belt
pretensioners are not replaced, the
risk of injury in a collision will
increase. Expended front seat belt
pretensioners and air bags must be
replaced after any collision which
caused them to deploy. Additionally,
the load limiter will only limit loads
on the chest once in a collision and
this is another reason to have the
front seat belts inspected. Always
have an Authorized Mazda Dealer
inspect the front seat belt
Load limiter:
The load limiting system releases belt
webbing in a controlled manner to reduce
belt force on the occupant's chest. While
the most severe load on a seat belt occurs
in frontal collisions, the load limiter has
an automatic mechanical function and can
activate in any accident mode with
sufficient occupant movement.
Even if the pretensioners have not fired,
the load limiting function must be
checked by an Authorized Mazda Dealer
after any collision.
pretensioners and air bags after any
collision.
2-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page33
Wednesday, July 8 2009 11:26 AM
Black plate (33,1)
Essential Safety Equipment
Seat Belt Systems
Do not modify the components or
wiring, or use electronic testing devices
on the pretensioner system:
q
Air Bag/Front Seat Belt
Pretensioner System Warning Light
Modifying the components or wiring
of the pretensioner system, including
the use of electronic testing devices is
dangerous. You could accidentally
activate it or make it inoperable
which would prevent it from
activating in an accident. The
occupants or repairers could be
seriously injured.
If the air bag/front seat belt pretensioner
system is working properly, the warning
light illuminates when the ignition switch
is turned to the ON position or after the
engine is cranked. The warning light turns
off after a specified period of time.
Properly dispose of the pretensioner
system:
Improper disposal of the pretensioner
system or a vehicle with non-
deactivated pretensioners is
A system malfunction is indicated if the
warning light constantly flashes,
dangerous. Unless all safety
constantly illuminates or does not
illuminate at all when the ignition switch
is turned to the ON position. If any of
these occur, consult an Authorized Mazda
Dealer as soon as possible. The system
may not work in an accident.
procedures are followed, injury could
result. Ask an Authorized Mazda
Dealer how to safely dispose of the
pretensioner system or how to scrap
a pretensioner-equipped vehicle.
NOTE
l
WARNING
The pretensioner system will activate in a
moderate or greater frontal or near-frontal
collision. It will not activate in most
rollovers, side or rear impacts.
The pretensioner system for the front
passenger is designed to only deploy in
accordance with the total seated weight on
the front passenger seat.
Never tamper with the air bag/
pretensioner systems and always have
an Authorized Mazda Dealer perform
all servicing and repairs:
Self-servicing or tampering with the
systems is dangerous. An air bag/
pretensioner could accidentally
activate or become disabled causing
serious injury or death.
l
Some smoke (non-toxic gas) will be
released when the air bags and
pretensioners deploy. This does not indicate
a fire. This gas normally has no effect on
occupants, however, those with sensitive
skin may experience light skin irritation. If
residue from the deployment of the air bags
or the front pretensioner system gets on the
skin or in the eyes, wash it off as soon as
possible.
2-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page34
Wednesday, July 8 2009 11:26 AM
Black plate (34,1)
Essential Safety Equipment
Seat Belt Systems
Seat Belt Extender
WARNING
Do not use a seat belt extender unless
it is necessary:
If your seat belt is not long enough, even
when fully extended, a seat belt extender
may be available to you at no charge from
your Authorized Mazda Dealer.
This extender will be only for you and for
the particular vehicle and seat. Even if it
plugs into other seat belts, it may not hold
in the critical moment of a crash.
When ordering an extender, only order
one that provides the necessary additional
length to fasten the seat belt properly.
Please contact your Authorized Mazda
Dealer for more information.
Using a seat belt extender when not
necessary is dangerous. The seat belt
will be too long and not fit properly.
In an accident, the seat belt will not
provide adequate protection and you
could be seriously injured. Only use
the extender when it is required to
fasten the seat belt properly.
Do not use an improper extender:
Using a seat belt extender that is for
another person or a different vehicle
or seat is dangerous. The seat belt
will not provide adequate protection
and the user could be seriously
injured in an accident. Only use the
extender provided for you and for the
particular vehicle and seat. NEVER
use the extender in a different vehicle
or seat. If you sell your Mazda, do
not leave your seat belt extender in
the vehicle. It could be used
accidentally by the new owner of the
vehicle. After removing the seat belt
extender, discard it. Never use the
seat belt extender in any other
vehicle you may own in the future.
Do not use an extender that is too
long:
Using an extender that is too long is
dangerous. The seat belt will not fit
properly. In an accident, the seat belt
will not provide adequate protection
and you could be seriously injured.
Do not use the extender or choose
one shorter in length if the distance
between the extender's buckle and
the center of the user's body is less
than 15 cm (6 in).
2-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page35
Wednesday, July 8 2009 11:26 AM
Black plate (35,1)
Essential Safety Equipment
Seat Belt Systems
NOTE
Seat Belt Warning Light/Beep
When not in use, remove the seat belt extender
and store it in the vehicle. If the seat belt
extender is left connected, the seat belt
extender might get damaged as it will not
retract with the rest of the seat belt and can
easily fall out of the door when not in use and
be damaged. In addition, the seat belt warning
light will not illuminate and function properly.
The seat belt warning light illuminates
and a beep sound will be heard if the
driver's seat belt is not fastened when the
ignition switch is turned to the ON
position.
Conditions of operation
Condition
Result
The driver's seat belt is not The warning light
fastened when the ignition flashes and a beep
switch is turned to the ON sound will be heard
position.
for about 6 seconds.
The driver's seat belt is
fastened while the warning
light and the beep sound are
activated.
The warning light
turns off and the beep
sound stops.
The driver's seat belt is
The warning light will
fastened before the ignition not illuminate and the
switch is turned to the ON beep sound will not be
position.
heard.
qBelt Minder
NOTE
The belt minder can be deactivated. Consult an
Authorized Mazda Dealer to deactivate or
restore the seat belt minder.
2-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page36
Wednesday, July 8 2009 11:26 AM
Black plate (36,1)
Essential Safety Equipment
Seat Belt Systems
Driver seated/Front passenger not
seated
Driver seated/Front passenger seated
The seat belt warning function reminds
the front passenger to fasten the seat belt
according to the chart below.
The belt minder is a supplemental
warning to the seat belt warning function.
If the driver's seat belt is not fastened
when the ignition switch is turned to the
ON position, the warning light/beep
operates to give you further reminders
according to the chart below.
Vehicle speed
Between 0 ― 20
km/h
(0 ― 12 mph)
20 km/h
(12 mph) or
more
Condition
Seat belt
(Driver)
Vehicle speed
Seat belt
(Passenger)
Between 0 ― 20
km/h
(0 ― 12 mph)
20 km/h
(12 mph) or
more
Condition
Indicator
Beep
Seat belt
Indicator
Beep
: Fastened
: Unfastened
: Illuminated
: Flashing
: Beep
: Fastened
: Unfastened
: Illuminated
: Flashing
: Beep
Placing heavy items on the front
passenger seat may cause the front
passenger seat belt warning function to
operate depending on the weight of the
item.
Once the beep sound is heard, it continues
sounding even if the vehicle speed lowers
to 20 km/h (12 mph) or less until the
seatbelt is fastened or the beep sound
period has passed.
Once the beep sound is heard, it continues
sounding even if the vehicle speed lowers
to 20 km/h (12 mph) or less until the
seatbelt is fastened or the beep sound
period has passed.
NOTE
l
To allow the front passenger seat weight
sensor to function properly, do not place
and sit on an additional seat cushion on the
front passenger seat. The sensor may not
function properly because the additional
seat cushion could cause sensor
interference.
l
When a small child sits on the front
passenger seat, it is possible that neither
the warning light nor the warning beep
operate.
2-24
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page37
Wednesday, July 8 2009 11:26 AM
Black plate (37,1)
Essential Safety Equipment
Child Restraint
Child Restraint Precautions
Mazda strongly urges the use of child-restraint systems for children small enough to use
them.
You are required by law to use a child-restraint system for children in the U.S. and Canada.
Check your local and state or provincial laws for specific requirements regarding the safety
of children riding in your vehicle.
Whatever child-restraint system you consider, please pick the appropriate one for the age
and size of the child, obey the law and follow the instructions that come with the individual
child-restraint system.
A child who has outgrown child-restraint systems should sit in the rear and use seat belts,
both lap and shoulder. If the shoulder belt crosses the neck or face, move the child closer to
the center of the vehicle.
Statistics confirm that the rear seats are the best place for all children up to 12 years of age,
and more so with a supplemental restraint system (air bags).
A rear-facing child-restraint system should NEVER be used on the front seat with the air
bag system activated. The front passenger's seat is also the least preferred seat for other
child-restraint systems.
To reduce the chance of injuries caused by deployment of the front passenger air bag, the
front passenger seat weight sensors work as a part of the supplemental restraint system.
This system deactivates the front passenger front and side air bags and also the front
passenger seat belt pretensioner system when the total seated weight on the front passenger
seat is less than approximately 30 kg (66 lb).
When an infant or small child sits on the front passenger seat, the system shuts off the front
passenger front and side air bags and seat belt pretensioner system, so make sure the front
passenger air bag deactivation indicator light illuminates.
Even if the front passenger air bag is shut off, Mazda strongly recommends that children be
properly restrained and child-restraint systems of all kinds are properly secured on the rear
seats which are the best place for children.
2-25
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page38
Wednesday, July 8 2009 11:26 AM
Black plate (38,1)
Essential Safety Equipment
Child Restraint
WARNING
Use the correct size child-restraint system:
For effective protection in vehicle accidents and sudden stops, a child must be
properly restrained using a seat belt or child-restraint system depending on age and
size. If not, the child could be seriously injured or even killed in an accident.
Follow the manufacturer's instructions and always keep the child-restraint system
buckled down:
An unsecured child-restraint system is dangerous. In a sudden stop or a collision it
could move causing serious injury or death to the child or other occupants. Make
sure any child-restraint system is properly secured in place according to the child-
restraint system manufacturer's instructions. When not in use, remove it from the
vehicle or fasten it with a seat belt, or latch it down to BOTH LATCH lower anchors
for LATCH child-restraint systems and the corresponding tether anchor.
Always secure a child in a proper child-restraint system:
Holding a child in your arms while the vehicle is moving is extremely dangerous. No
matter how strong the person may be, he or she cannot hold onto a child in a
sudden stop or collision and it could result in serious injury or death to the child or
other occupants. Even in a moderate accident, the child may be exposed to air bag
forces that could result in serious injury or death to the child, or the child may be
slammed into an adult, causing injury to both child and adult.
Never use a rear-facing child-restraint system in the front seat with an air bag that
could deploy:
Rear-facing child-restraint systems on the front seat are particularly dangerous even
though you may feel assured that a front passenger air bag will not deploy based on
the fact that the front passenger air bag deactivation indicator light illuminates. The
child-restraint system can be hit by a deploying air bag and moved violently
backward resulting in serious injury or death to the child.
2-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page39
Wednesday, July 8 2009 11:26 AM
Black plate (39,1)
Essential Safety Equipment
Child Restraint
Do not install a front-facing child-restraint system on the front passenger seat unless
it is unavoidable:
In a collision, the force of a deploying air bag could cause serious injury or death to
the child. If installing a front-facing child-restraint system on the front passenger
seat is unavoidable, move the front passenger seat as far back as possible.
Seating a child in a child-restraint system on the front passenger seat is dangerous:
Your vehicle is equipped with front passenger seat weight sensors. Even with the
front passenger seat weight sensors, if you must use the front passenger seat to seat
a child, using a child in a child-restraint system on the front passenger seat under
the following conditions increases the danger of the front passenger air bag
deploying and could result in serious injury or death to the child.
Ø The total seated weight of the child with the child-restraint system on the front
passenger seat is approximately 30 kg (66 lb) or more with a child in the child-
restraint system.
Ø Luggage or other items are placed on the seat with the child in the child-restraint
system.
Ø A rear passenger or luggage pushing or pulling down on the front passenger
seatback.
Ø A rear passenger puts their feet on the front seat rails.
Ø Luggage or other items are placed on the seatback or hung on the head restraint
or armrest.
Ø The seat is washed.
Ø Liquids are spilled on the seat.
Ø The front passenger seat is moved backward, pushing into luggage or other items
placed behind it.
Ø The front passenger seatback contacts the second-row seat.
Ø Luggage or other items are placed between the front passenger seat and driver
seat.
Ø Any accessories, which might increase the total seated weight on the front
passenger seat, are attached to the front passenger seat.
The designated positions with seat belts on the rear seats are the safest places for
children. Always use seat belts and child restraints.
2-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page40
Wednesday, July 8 2009 11:26 AM
Black plate (40,1)
Essential Safety Equipment
Child Restraint
Do not allow a child or anyone to lean over or against the side window of a vehicle
with side and curtain air bags:
It is dangerous to allow anyone to lean over or against the side window, the area of
the front passenger seat, the front and rear window pillars and the roof edge along
both sides from which the side and curtain air bags deploy, even if a child-restraint
system is used. The impact of inflation from a side or curtain air bag could cause
serious injury or death to an out of position child. Furthermore, leaning over or
against the front door could block the side and curtain air bags and eliminate the
advantages of supplemental protection. With the front air bag and the additional
side air bag that comes out of the front seat, the rear seat is always a better location
for children. Take special care not to allow a child to lean over or against the side
window, even if the child is seated in a child-restraint system.
Never use one seat belt on more than one person at a time:
Using one seat belt for more than one person at a time is dangerous. A seat belt
used in this way cannot spread the impact forces properly and the two passengers
could be crushed together and seriously injured or even killed. Never use one belt for
more than one person at a time and always operate the vehicle with each occupant
properly restrained.
CAUTION
A seat belt or child-restraint system can become very hot in a closed vehicle during
warm weather. To avoid burning yourself or a child, check them before you or your
child touches them.
NOTE
Your Mazda is equipped with LATCH lower anchors for attachment of specially designed LATCH
child-restraint systems in the rear seats. When using these anchors to secure a child-restraint system,
2-28
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page41
Wednesday, July 8 2009 11:26 AM
Black plate (41,1)
Essential Safety Equipment
Child Restraint
Installing Child-Restraint
Systems
WARNING
Tethered Child-Restraint Systems Work
Only on Tether-Equipped Rear Seats:
Installation of a tether equipped
child-restraint system in the front
passenger's seat defeats the safety
design of the system and will result in
an increased chance of serious injury
if the child-restraint system goes
forward without benefit of being
tethered.
Accident statistics reveal that a child is
safer in the rear seats. The front
passenger's seat is clearly the worst choice
for any child under 12, and with rear-
facing child-restraint systems it is clearly
unsafe due to air bags.
NOTE
Even if your vehicle is equipped with front
passenger seat weight sensors (page 2-44),
which automatically deactivates the front
passenger air bag, a rear seat is the safest
place for a child of any age or size.
Place tether equipped child-restraint
systems where there are tether
anchors.
qRear Seats Child-Restraint
System Installation
Some child-restraint systems now come
with tethers and therefore must be
installed on the seats that take tethers to
be effective. In your Mazda, tethered
child-restraint systems can only be
accommodated in the four positions on
the rear seats.
Follow these instructions when using a
child-restraint system, unless you are
attaching a LATCH-equipped child-
restraint system to the rear LATCH lower
anchors. Refer to “LATCH Child-
NOTE
Some child-restraint systems also employ
specially designed LATCH attachments;
refer to “LATCH Child-Restraint
Follow the child-restraint system
manufacturer's instructions carefully. If you
are not sure whether you have a LATCH
system or tether, check in the child-restraint
system manufacturer's instructions and follow
them accordingly. Depending on the type of
child-restraint system, it may use LATCH
system instead of seat belts or if the belt goes
across the child's chest, may recommend
against using automatic locking mode.
1. If the seat in which you install a child-
restraint system has a seat slide
function, slide the seat as far back as
possible.
2. Make sure the seatback is securely
latched by pushing it back until it is
fully locked.
2-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page42
Wednesday, July 8 2009 11:26 AM
Black plate (42,1)
Essential Safety Equipment
Child Restraint
3. Raise the head restraint to the top
locked position.
6. Push the child-restraint system firmly
into the vehicle seat. Be sure the belt
retracts as snugly as possible. A
clicking noise from the retractor will be
heard during retraction if the system is
in the automatic locking mode. If the
belt does not lock the seat down tight,
repeat this step.
Refer to Head Restraints on page 2-11.
4. Secure the child-restraint system with
the lap portion of the lap/shoulder belt.
See the manufacturer's instructions on
the child-restraint system for belt
routing instructions.
5. To get the retractor into the automatic
locking mode, pull the shoulder belt
portion of the seat belt until the entire
length of the belt is out of the retractor.
NOTE
Inspect this function before each use of the
child-restraint system. You should not be able
to pull the shoulder belt out of the retractor
while the system is in the automatic locking
mode. When you remove the child-restraint
system, be sure the belt fully retracts to return
the system to emergency locking mode before
occupants use the seat belts.
7. If your child-restraint system requires
the use of a tether strap, refer to the
manufacturer's instructions to hook and
tighten the tether strap.
2-30
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page43
Wednesday, July 8 2009 11:26 AM
Black plate (43,1)
Essential Safety Equipment
Child Restraint
Anchor bracket location (Second-row
seats)
Tether strap position (Third-row seat)
Tether strap
Marking
Forward
WARNING
Use the tether and tether anchor only
for a child-restraint system:
Tether strap position (Second-row
seats)
Tether strap
Using the tether or tether anchor to
secure anything but a child-restraint
system is dangerous. This could
weaken or damage the tether or
tether anchor and result in injury.
Always route the tether strap between
the head restraint and the seatback:
Routing the tether strap on top of the
head restraint is dangerous. In a
collision the tether strap could slide
off the head restraint and loosen the
child-restraint system. The child-
restraint system could move which
may result in death or injury to the
child.
Anchor
bracket
Anchor bracket location (Third-row
seat)
Marking
Always attach the tether strap to the
correct tether anchor position:
Attaching the tether strap to the
incorrect tether anchor position is
dangerous. In a collision, the tether
strap could come off and loosen the
child-restraint system. If the child-
restraint system moves it could result
in death or injury to the child.
Anchor
bracket
2-31
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page44
Wednesday, July 8 2009 11:26 AM
Black plate (44,1)
Essential Safety Equipment
Child Restraint
qIf You Must Use the Front Seat
WARNING
for Children
Always move the front passenger seat
as far back as possible if installing a
front-facing child-restraint system on it
is unavoidable:
If you cannot put all children in the rear
seats, at least put the smallest children in
the rear and be sure the largest child up
front uses the shoulder belt over the
shoulder.
NEVER put a rear-facing child-restraint
system on the front passenger seat
whether your vehicle is equipped with a
seat weight sensor or not.
This seat is also not set up for tethered
child-restraint systems, put them in one of
the rear seat positions set up with tether
anchors.
Likewise the LATCH child-restraint
system cannot be secured in the front
passenger's seat and should be used in the
second-row seats.
Do not allow anyone to sleep against the
side window if you have an optional side
and curtain air bag, it could cause serious
injuries to an out of position occupant. As
children more often sleep in cars, it is
better to put them in the rear seat. If
installing the child-restraint system on the
front seat is unavoidable, follow these
instructions when using a front-facing
child-restraint system in the front
passenger's seat.
As your vehicle has front air bags
and doubly so because your vehicle
has side air bags, a front-facing
child-restraint system should be put
on the front passenger seat only
when it is unavoidable.
Even if the front passenger air bag
deactivation indicator light
illuminates, always move the seat as
far back as possible, because the
force of a deploying air bag could
cause serious injury or death to the
child.
Never use a rear-facing child-restraint
system in the front seat with an air bag
that could deploy:
Rear-facing child-restraint systems
on the front seat are particularly
dangerous.
Even in a moderate collision, the
child-restraint system can be hit by a
deploying air bag and moved
violently backward resulting in
serious injury or death to the child.
Even though you may feel assured
that the front passenger air bag will
not deploy based on the fact that the
front passenger air bag deactivation
indicator light illuminates.
NOTE
l
To check if your front seats have side air
bags:
Mazda vehicles equipped with side air bag
will have a “SRS AIRBAG” tag on the
outboard shoulder of the front seats.
l
To check if your vehicle has curtain air
bags:
Mazda vehicles equipped with curtain air
bag will have an “SRS AIRBAG” marking
on the window pillars along the roof edge.
2-32
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page45
Wednesday, July 8 2009 11:26 AM
Black plate (45,1)
Essential Safety Equipment
Child Restraint
Do not allow a child or anyone to lean
over or against the side window of a
vehicle with side and curtain air bags:
It is dangerous to allow anyone to
lean over or against the side window,
the area of the front passenger seat,
the front and rear window pillars and
the roof edge along both sides from
which the side and curtain air bags
deploy, even if a child-restraint
2. Secure the child-restraint system with
the lap portion of the lap/shoulder belt.
See the manufacturer's instructions on
the child-restraint system for belt
routing instructions.
3. To get the retractor into the automatic
locking mode, pull the shoulder belt
portion of the seat belt until the entire
length of the belt is out of the retractor.
system is used. The impact of
4. Push the child-restraint system firmly
into the vehicle seat. Be sure the belt
retracts as snugly as possible. A
clicking noise from the retractor will be
heard during retraction if the system is
in automatic locking mode. If the belt
does not lock the seat down tight,
repeat the previous step and also this
one.
inflation from a side or curtain air
bag could cause serious injury or
death to an out of position child.
Furthermore, leaning over or against
the front door could block the side
and curtain air bags and eliminate
the advantages of supplemental
protection. With the front air bag and
the additional side air bag that
comes out of the front seat, the rear
seat is always a better location for
children. Take special care not to
allow a child to lean over or against
the side window, even if the child is
seated in a child-restraint system.
NOTE
l
Inspect this function before each use of the
child-restraint system. You should not be
able to pull the shoulder belt out of the
retractor while the system is in the
automatic locking mode. When you remove
the child-restraint system, be sure the belt
fully retracts to return the system to
emergency locking mode before occupants
use the seat belts.
qFront Passenger's Seat Child-
Restraint System Installation
l
Follow the child-restraint system
1. Slide the seat as far back as possible.
manufacturer's instructions carefully.
Depending on the type of child-restraint
system, it may not employ seat belts which
are in automatic locking mode.
2-33
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page46
Wednesday, July 8 2009 11:26 AM
Black plate (46,1)
Essential Safety Equipment
Child Restraint
5. Make sure the front passenger air bag
deactivation indicator light illuminates
after installing a child-restraint system
on the front passenger seat.
WARNING
Do not seat a child in a child-restraint
system on the front passenger seat if
the front passenger air bag
deactivation indicator light does not
illuminate:
Refer to Front passenger air bag
deactivation indicator light on page
While it is always better to install any
child-restraint system on the rear
seat, it is imperative that a child-
restraint system ONLY be used on the
front passenger seat if the
deactivation indicator light
illuminates when the child is seated
in the child-restraint system (page
2-44). Seating a child in a child-
restraint system installed on the front
passenger seat with the front
passenger air bag deactivation
indicator light not illuminated is
dangerous. If this indicator light does
not illuminate even when the total
seated weight is less than
approximately 30 kg (66 lb), this
means that the front passenger front
and side air bags, and seat belt
pretensioner are ready for
deployment. If an accident were to
deploy an air bag, a child in a child-
restraint system sitting in the front
passenger seat could be seriously
injured or killed. If the indicator light
does not illuminate after seating a
child in a child-restraint system on
the front passenger seat, seat a child
in a child-restraint system on the rear
seat and consult an Authorized
Mazda Dealer as soon as possible.
2-34
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page47
Wednesday, July 8 2009 11:26 AM
Black plate (47,1)
Essential Safety Equipment
Child Restraint
LATCH Child-Restraint Systems
Your Mazda is equipped with LATCH lower anchors for attachment of specially designed
LATCH child-restraint systems in the rear seats. Both anchors must be used, otherwise the
seat will bounce around and put the child in danger. Most LATCH child-restraint systems
must also be used in conjunction with a tether to be effective. If they have a tether you
must use it to better assure your child's safety.
WARNING
Follow the manufacturer's instructions for the use of the child-restraint system:
An unsecured child-restraint system is dangerous. In a sudden stop or a collision it
could move causing serious injury or death to the child or other occupants. Make
sure the child-restraint system is properly secured in place according to the child-
restraint system manufacturer's instructions.
Never attach two child-restraint systems to the same LATCH lower anchor:
Attaching two child-restraint systems to the same LATCH lower anchor is dangerous.
In a collision, one anchor may not be strong enough to hold two child-restraint
system attachments, and it may break, causing serious injury or death. If you use the
seat position for another child-restraint system when an outboard LATCH position is
occupied, use the center seat belts instead, and the tether if tether-equipped.
Make sure the child-restraint system is properly secured:
An unsecured child-restraint system is dangerous. In a sudden stop or a collision it
could move causing serious injury or death to the child or other occupants. Follow
the child-restraint system manufacturer's instructions on belt routing to secure the
seat just as you would with a child in it so that nobody is tempted to put a child in
an improperly secured seat later on. When not in use, remove it from the vehicle or
fasten it with a seat belt, or latch it down to BOTH LATCH lower anchors for LATCH
child-restraint systems.
Make sure there are no seat belts or foreign objects near or around the LATCH child-
restraint system:
Not following the child-restraint system manufacturer's instructions when installing
the child-restraint system is dangerous. If seat belts or a foreign object prevent the
child-restraint system from being securely attached to the LATCH lower anchors and
the child-restraint system is installed improperly, the child-restraint system could
move in a sudden stop or collision causing serious injury or death to the child or
other occupants. When installing the child-restraint system, make sure there are no
seat belts or foreign objects near or around the LATCH lower anchors. Always follow
the child-restraint system manufacturer's instructions.
2-35
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page48
Wednesday, July 8 2009 11:26 AM
Black plate (48,1)
Essential Safety Equipment
Child Restraint
6. If your child-restraint system came
equipped with a tether, that means it is
very important to properly secure the
tether for child safety. Please carefully
follow the child-restraint system
manufacturer's instructions when
installing tethers.
qLATCH Child-Restraint System
Installation Procedure (Second-
Row Seats Only)
1. Slide the second-row seat as far back as
possible.
2. Make sure the seatback is securely
latched by pushing it back until it is
fully locked.
Anchor bracket location
3. Expand the area between the seat
bottom and the seatback slightly to
verify the locations of the LATCH
lower anchors.
Marking
Tether strap position
Tether strap
NOTE
The markings above the LATCH lower anchors
indicate the locations of LATCH lower
anchors for the attachment of a child-restraint
system.
Anchor
bracket
4. Raise the head restraint to the top
locked position.
Refer to Head Restraints on page 2-11.
5. Secure the child-restraint system using
BOTH LATCH lower anchors,
following the child-restraint system
manufacturer's instruction. Pull on the
child-restraint to be sure both anchors
are engaged.
2-36
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page49
Wednesday, July 8 2009 11:26 AM
Black plate (49,1)
Essential Safety Equipment
Child Restraint
WARNING
Use the tether and tether anchor only
for a child-restraint system:
Using the tether or tether anchor to
secure anything but a child-restraint
system is dangerous. This could
weaken or damage the tether or
tether anchor and result in injury.
Always route the tether strap between
the head restraint and the seatback:
Routing the tether strap on top of the
head restraint is dangerous. In a
collision the tether strap could slide
off the head restraint and loosen the
child-restraint system. The child-
restraint system could move which
may result in death or injury to the
child.
Always attach the tether strap to the
correct tether anchor position:
Attaching the tether strap to the
incorrect tether anchor position is
dangerous. In a collision, the tether
strap could come off and loosen the
child-restraint system. If the child-
restraint system moves it could result
in death or injury to the child.
2-37
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page50
Wednesday, July 8 2009 11:26 AM
Black plate (50,1)
Essential Safety Equipment
SRS Air Bags
Supplemental Restraint Systems (SRS) Precautions
The front and side supplemental restraint systems (SRS) include 6 air bags. Please verify
the air bags equipped on your vehicle by locating the “SRS AIRBAG” location
indicators. These indicators are visible in the area where the air bags are installed.
The air bags are installed in the following locations:
l
The steering wheel hub (driver air bag)
The front passenger dashboard (front passenger air bag)
The outboard sides of the front seatbacks (side air bags)
The front and rear window pillars, and the roof edge along both sides (curtain air bags)
l
l
l
These systems operate independently depending on the type of accident encountered; The
side and curtain air bags are not likely to deploy on both sides in the same accident because
a vehicle is not often hit from both sides. The side and curtain air bags and the frontal air
bag system will not normally deploy during the same type of accident unless a combination
of frontal and side impacts occur.
The air bag supplemental restraint systems are designed to provide supplemental protection
only in the front seats in certain situations and the rear outside passenger positions only in
same-side collisions, so seat belts are always important in the following ways:
Without seat belt usage, the air bags cannot provide adequate protection during an accident.
Seat belt usage is necessary to:
l
Keep the occupant from being thrown into an inflating air bag.
Reduce the possibility of injuries during an accident that is not designed for air bag
l
inflation, such as roll-over or rear impact.
Reduce the possibility of injuries in frontal or side collisions that are not severe enough
l
to activate the air bags.
Reduce the possibility of being thrown from your vehicle.
Reduce the possibility of injuries to lower body and legs during an accident because the
l
l
air bags provide no protection to these parts of the body.
Hold the driver in a position which allows better control of the vehicle.
l
Children should be protected by a child-restraint system as stipulated by law in every state
and province. In certain states and provinces, laws vary on the size a child must be to use a
child-restraint system (page 2-25).
Carefully consider which child-restraint system is necessary for your child and follow the
installation directions in this Owner's Manual as well as the child-restraint system
manufacturer's instructions.
2-38
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page51
Wednesday, July 8 2009 11:26 AM
Black plate (51,1)
Essential Safety Equipment
SRS Air Bags
WARNING
Seat belts must be worn in air bag equipped vehicles:
Depending only on the air bags for protection during an accident is dangerous.
Alone, air bags may not prevent serious injuries. The appropriate air bags can be
expected to inflate only in the first collision with frontal, near frontal or side forces
that are at least moderate. Vehicle occupants should always wear seat belts.
Children should not ride in the front passenger seat:
Placing a child, 12 years or under, in the front seat is dangerous. The child could be
hit by a deploying air bag and be seriously injured or even killed. A sleeping child is
more likely to lean against the door and be hit by the side air bag in a moderate,
right-side collision. Whenever possible, always secure a child 12 years and under on
the rear seats with an appropriate child-restraint system for the child's age and size.
Never use a rear-facing child-restraint system in the front seat with an air bag that
could deploy:
Rear-facing child-restraint systems on the front seat are particularly dangerous even
though you may feel assured that a front passenger air bag will not deploy based on
the fact that the front passenger air bag deactivation indicator light illuminates. The
child-restraint system can be hit by a deploying air bag and moved violently
backward resulting in serious injury or death to the child.
Do not sit too close to the driver and front passenger air bags:
Sitting too close to the driver and front passenger air bag modules or placing hands
or feet on them is extremely dangerous. The driver and front passenger air bags
inflate with great force and speed. Serious injuries could occur if someone is too
close. The driver should always hold onto only the rim of the steering wheel. The
front seat passenger should keep both feet on the floor. Front seat occupants should
adjust their seats as far back as possible and always sit upright against the
seatbacks with seat belts worn properly.
2-39
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page52
Wednesday, July 8 2009 11:26 AM
Black plate (52,1)
Essential Safety Equipment
SRS Air Bags
Sit in the center of the seat and wear seat belts properly:
Sitting too close to the side air bag modules or placing hands on them is extremely
dangerous. The side air bags inflate with great force and speed directly out of the
outboard side of the front seat and expand along the front door on the side the car is
hit. Serious injury could occur if someone is sitting too close to the door or leaning
against a window, or if rear seat occupants grab the sides of the front seatbacks.
Furthermore, sleeping up against the door or hanging out the windows in the vehicle
could block the side and curtain air bags and eliminate the advantages of
supplemental protection. Give the side and curtain air bags room to work by sitting
in the center of the seat while the vehicle is moving with seat belts worn properly.
Do not attach objects on or around the area where driver and front passenger air
bags deploy:
Attaching an object to the driver and front passenger air bag modules or placing
something in front of them is dangerous. In an accident, an object could interfere
with air bag inflation and injure the occupants.
Do not attach objects on or around the area where a side air bag deploys:
Attaching objects to a front seat in such a way as to cover the outboard side of the
seat in any way is dangerous. In an accident the object could interfere with the side
air bag, which inflates from the outboard side of the front seats, impeding the added
protection of the side air bag system or redirecting the air bag in a way that is
dangerous. Furthermore, the bag could be cut open releasing the gas.
Do not hang net bags, map pouches or backpacks with side straps on the front
seats. Never use seat covers on the front seats. Always keep the side air bag modules
in your front seats free to deploy in the event of a side collision.
Do not attach objects on or around the area where a curtain air bag deploys:
Attaching objects to the areas where the curtain air bag deploys such as on the
windshield glass, side door glass, front and rear window pillars, and along the roof
edge and assist grips is dangerous. In an accident the object could interfere with the
curtain air bag, which inflates from the front and rear window pillars and along the
roof edge, impeding the added protection of the curtain air bag system or redirecting
the air bag in a way that is dangerous. Furthermore, the bag could be cut open
spewing exhaust.
Do not place hangers or any other objects on the assist grips. When hanging clothes,
hang them on the coat hook directly. Always keep the curtain air bag modules free
to deploy in the event of a side collision.
Do not touch the components of the supplemental restraint system after the air bags
have inflated:
Touching the components of the supplemental restraint system after the air bags
have inflated is dangerous. Immediately after inflation, they are very hot. You could
get burned.
2-40
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page53
Wednesday, July 8 2009 11:26 AM
Black plate (53,1)
Essential Safety Equipment
SRS Air Bags
Never install any front-end equipment to your vehicle:
Installation of front-end equipment, such as frontal protection bar (kangaroo bar,
bull bar, push bar, or other similar devices.), snowplow, or winches is dangerous. The
air bag crash sensor system could be affected. This could cause air bags to inflate
unexpectedly, or it could prevent the air bags from inflating during an accident.
Front occupants could be seriously injured.
Do not modify the suspension:
Modifying the vehicle suspension is dangerous. If the vehicle's height or the
suspension is modified, the vehicle will be unable to accurately detect a collision
resulting in incorrect or unexpected air bag deployment and the possibility of serious
injuries.
Do not modify the supplemental restraint system:
Modifying the components or wiring of the supplemental restraint system is
dangerous. You could accidentally activate it or make it inoperable. Do not make
any modifications to the supplemental restraint system. This includes installing trim,
badges, or anything else over the air bag modules. It also includes installing extra
electrical equipment on or near system components or wiring. An Authorized Mazda
Dealer can provide the special care needed in the removal and installation of front
seats. It is important to protect the side and curtain air bag wiring and connections
to assure that the bags do not accidentally deploy and that the seats retain an
undamaged air bag connection.
Do not place luggage or other objects under the front seats:
Placing luggage or other objects under the front seats is dangerous. The components
essential to the supplemental restraint system could be damaged, and in the event of
a side collision, the appropriate air bags may not deploy, which could result in death
or serious injury. To prevent damage to the components essential to the
supplemental restraint system, do not place luggage or other objects under the front
seats.
NOTE
l
When an air bag deploys, a loud inflation noise can be heard and some smoke will be released.
Neither is likely to cause injury, however, the texture of the air bags may cause light skin injuries
on body parts not covered with clothing through friction.
l
Should you sell your Mazda, we urge you to tell the new owner of its air bag systems and that
familiarization with all instructions about them, from the Owner's Manual, is important.
2-41
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page54
Wednesday, July 8 2009 11:26 AM
Black plate (54,1)
Essential Safety Equipment
SRS Air Bags
Supplemental Restraint System Components
The supplemental restraint systems (SRS) have two basic subsystems:
l
The air bag system with inflators and air bags.
The electrical system with crash sensors and diagnostic module.
l
The air bags are mounted in the following locations:
l
The steering wheel hub
The front passenger dashboard
The outboard sides of the front seatbacks
The front and rear window pillars, and the roof edge along both sides
l
l
l
The air bags are out of sight until activated.
Driver/Front passenger inflators and air bags
Crash sensors, and diagnostic module (SAS unit)
Front seat belt pretensioners (page 2-20)
Front air bag sensor
Side crash sensors
Air bag/front seat belt pretensioner system warning light
Side and curtain inflators and air bags
Front passenger air bag deactivation indicator light (page 2-44)
Front passenger seat weight sensors (page 2-44)
Front passenger seat weight sensor control module
2-42
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page55
Wednesday, July 8 2009 11:26 AM
Black plate (55,1)
Essential Safety Equipment
SRS Air Bags
Driver and front passenger seat belt buckle switches (page 2-44)
Driver seat slide position sensor
Front seats
2-43
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page56
Wednesday, July 8 2009 11:26 AM
Black plate (56,1)
Essential Safety Equipment
SRS Air Bags
How the Air Bags Work
qHow the Front Air Bags Work
When air bag crash sensors detect a frontal impact of greater than moderate force, an
electrical current is sent to the inflators.
Gases are produced to inflate the front air bags and after the inflation, the front air bags
quickly deflate.
The front air bags will function only once. After that, the front air bags will not work
again and must be replaced.
Only an Authorized Mazda Dealer can replace the system components.
The front, dual stage air bags control air bag inflation in two energy stages. During an
impact of moderate severity the front air bags deploy with lesser energy, whereas during
more severe impacts, they deploy with more energy. Deployment of the front air bags may
differ between the driver and the front passenger depending on the driver seat position,
front passenger weight and front seat belt usage, all of which provide data from each sensor
to the air bag system.
The front air bags will deploy only
in a frontal or frontal offset impact.
Driver seat slide position sensor
Your vehicle is equipped with a driver seat slide position sensor as a part of the
supplemental restraint system. The sensor is located under the driver seat. The sensor
determines whether the driver seat is fore or aft of a reference position and sends the seat
position to the diagnostic module (SAS unit). The SAS unit is also designed to control the
deployment of the driver air bag depending on how close the driver seat is to the steering
wheel.
The air bag/front seat belt pretensioner system warning light flashes if the sensor has a
possible malfunction (page 2-53).
2-44
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page57
Wednesday, July 8 2009 11:26 AM
Black plate (57,1)
Essential Safety Equipment
SRS Air Bags
Front passenger seat weight sensors
Your vehicle is equipped with a front passenger seat weight sensors as a part of the
front passenger seat rails. These sensors determine the total seated weight on the front
passenger seat. The SAS unit is designed to prevent the front passenger front and side air
bags and seat belt pretensioner system from deploying if the total seated weight is less than
approximately 30 kg (66 lbs).
To reduce the chance of injuries caused by deployment of the front passenger air bag, the
system deactivates the front passenger front and side air bags and also the seat belt
pretensioner system when:
l
There is no passenger in the front passenger seat. (The front passenger air bag
deactivation indicator light does not illuminate.)
The total seated weight on the front passenger seat is less than approximately 30 kg (66
l
lbs). (The front passenger air bag deactivation indicator light illuminates.)
This system shuts off the front passenger front and side air bags and seat belt pretensioner
system, so make sure the front passenger air bag deactivation indicator light illuminates
according to the following table.
The air bag/front seat belt pretensioner system warning light flashes and the front
passenger air bag deactivation indicator light illuminates if the sensors have a possible
malfunction. If this happens, the front passenger front and side air bags and seat belt
pretensioner system will not deploy.
Front passenger air bag deactivation indicator light
This indicator light illuminates to remind you that the front passenger front and side air
bags and seat belt pretensioner will not deploy during a collision.
2-45
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page58
Wednesday, July 8 2009 11:26 AM
Black plate (58,1)
Essential Safety Equipment
SRS Air Bags
If the front passenger weight sensors are working properly, the indicator light illuminates
when the ignition switch is turned to the ON position. After a specified period of time it
goes out.
The front passenger air bag deactivation indicator light illuminates or is off under the following conditions:
Front passenger seat
Total seated weight on the Front passenger air bag Front passenger front and
belt pretensioner
front passenger seat
deactivation indicator light
side air bags
Deactivated
Deactivated
system
Empty (Not occupied)*
OFF
ON
Deactivated
Less than approx. 30 kg
(66 lbs)
Deactivated
Ready
Approx. 42 kg (93 lbs) or
more
OFF
Ready
* If the front passenger seat belt is buckled, the front passenger air bag deactivation indicator light illuminates,
however this does not indicate a malfunction.
The curtain air bag is always ready to inflate and is not deactivated like the front passenger front and side air bags
and seat belt pretensioner systems.
If the front passenger air bag deactivation indicator light does not illuminate when the
ignition switch is turned to the ON position and does not illuminate as indicated in the
above chart, do not allow a child to sit in the front passenger seat; contact the Authorized
Mazda Dealer as soon as possible. The system may not work properly in an accident.
2-46
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page59
Wednesday, July 8 2009 11:26 AM
Black plate (59,1)
Essential Safety Equipment
SRS Air Bags
WARNING
Do not decrease the total seated weight on the front passenger seat:
When an adult or large child sits on the front passenger seat, decreasing the total
seated weight on the front passenger seat from the total seated weight of
approximately 42 kg (93 lbs) required for air bag deployment is dangerous. The front
passenger seat weight sensors will detect the reduced total seated weight condition
and the front passenger front and side air bags and seat belt pretensioner system
will not deploy during an accident. The front passenger will not have the
supplementary protection of the air bag, which could result in serious injury.
Decreasing the total seated weight on the front passenger seat from the total seated
weight of approximately 42 kg (93 lbs) could result in an air bag not deploying under
the following conditions, for example:
Ø A rear passenger pushes up on the front passenger seat with their feet.
Ø Luggage or other items placed under the front passenger seat or between the
front passenger seat and driver seat that push up the front passenger seat
bottom.
Ø The front passenger seat occupant sits in a manner that does not place the entire
weight of the occupant on the seat such as by sitting too close to the door,
grasping the assist grip or the rim of the moonroof and sitting with the seatback
reclined too far.
Ø Any accessories which might decrease the total seated weight on the front
passenger seat are attached to the front passenger seat.
The front passenger front and side air bags and seat belt pretensioner systems will
deactivate if the total seated weight on the front passenger seat is close to 30 kg (66
lbs) and they will reactivate before the weight exceeds 42 kg (93 lbs).
2-47
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page60
Wednesday, July 8 2009 11:26 AM
Black plate (60,1)
Essential Safety Equipment
SRS Air Bags
Do not increase the total seated weight on the front passenger seat:
When an infant or small child sits on the front passenger seat, increasing the total
seated weight on the front passenger seat from the total seated weight of
approximately 30 kg (66 lbs) is dangerous. The front passenger seat weight sensors
will detect the increased total seated weight, which could result in the unexpected
deployment of the front passenger front and side air bags and seat belt pretensioner
system in an accident and may cause serious injury. Increasing the total seated
weight on the front passenger seat beyond the total seated weight of approximately
30 kg (66 lbs) could result in the front passenger front and side air bags and seat
belt pretensioner system deployment in an accident under the following conditions,
for example:
Ø Luggage or other items are placed on the seat with the child in the child-restraint
system.
Ø A rear passenger or luggage push or pull down on the front passenger seatback.
Ø A rear passenger steps on the front passenger seat rails with their feet.
Ø Luggage or other items are placed on the seatback or hung on the head restraint
or armrest.
Ø The seat is washed.
Ø Liquids are spilled on the seat.
Ø The front passenger seat is moved backward, pushing into luggage or other items
placed behind it.
Ø The front passenger seatback contacts the second-row seat.
Ø Luggage or other items are placed between the front passenger seat and driver
seat.
Ø Any accessories which might increase the total seated weight on the front
passenger seat are attached to the front passenger seat.
The front passenger front and side air bags and seat belt pretensioner systems will
deactivate if the total seated weight on the front passenger seat is less than
approximately 30 kg (66 lbs) and they will reactivate when the weight exceeds
approximately 42 kg (93 lbs).
CAUTION
Ø To assure proper deployment of the front air bag and to prevent damage to the
sensors in the front seat bottoms:
Ø
Do not place sharp objects on the front seat bottoms or leave heavy luggage on
them.
Ø
Do not spill any liquids on the front seats or under the front seats.
Ø To allow the sensors to function properly, always perform the following:
Ø
Adjust the front seats as far back as possible and always sit upright against the
seatbacks with seat belts worn properly.
If you place your child on the front passenger seat, secure the child-restraint
system properly and slide the front passenger seat as far back as possible (page
Ø
2-48
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page61
Wednesday, July 8 2009 11:26 AM
Black plate (61,1)
Essential Safety Equipment
SRS Air Bags
NOTE
l
The system requires about 10 seconds to alternate between turning the front passenger front and
side air bags and seat belt pretensioner system on or off.
l
The front passenger air bag deactivation indicator light may illuminate repeatedly if luggage or
other items are put on the front passenger seat, or if the temperature of the vehicle's interior
changes suddenly.
l
l
The front passenger air bag deactivation indicator light may illuminate for 10 seconds if the total
seated weight on the front passenger seat changes.
If the front passenger air bag deactivation indicator light does not illuminate after installing a
child-restraint system on the front passenger seat, install the child-restraint system on the rear
seat and consult an Authorized Mazda Dealer as soon as possible.
Driver and front passenger buckle switches
The buckle switches on the front seat belts detect whether or not the front seat belts are
securely fastened and further control the deployment of the air bags.
qHow the Side and Curtain Air Bags Work
When air bag crash sensors detect a side impact of greater than moderate force, an
electrical current is sent to the inflators.
Gases are produced to inflate the side and curtain air bags and after the inflation, the side
and curtain air bags quickly deflate. However, the side air bag system for the front
passenger is designed to only deploy in accordance with the total seated weight on the front
passenger seat, however the curtains are not deactivated.
The side and curtain air bags will function only once. After that, the side and curtain air
bags will not work again and must be replaced. Only an Authorized Mazda Dealer can
replace the systems.
The side and curtain air bags will deploy only on the side the
vehicle receives the force of the impact.
2-49
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page62
Wednesday, July 8 2009 11:26 AM
Black plate (62,1)
Essential Safety Equipment
SRS Air Bags
qAir Bag Activation/Deactivation
NOTE
If the front passenger seat weight sensors detect a total seated weight on the front passenger seat is
less than approximately 42 kg (93 lb), the front passenger front and side air bags and seat belt
l
Front air bag activation
Frontal impact within about a 30
degree range from head-on to the
vehicle.
The front air bags will inflate if the
severity of impact is above the designed
threshold level.
l
Hitting a solid wall straight on at
greater than about 22 km/h (14 mph).
l
Driving into a big hole or hitting the far
side of a hole.
l
Hitting a curb, pavement edge or hard
object.
Limitations to front air bag activation
Depending on the severity of impact, the
front air bags may not inflate in the
following cases:
l
Landing hard or the vehicle falling.
l
Impacts involving trees or poles cause
severe cosmetic damage but may not
have enough stopping force to activate
the air bag.
2-50
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page63
Wednesday, July 8 2009 11:26 AM
Black plate (63,1)
Essential Safety Equipment
SRS Air Bags
l
l
Frontal offset impact to the vehicle
may not provide the stopping force
necessary for air bag deployment.
Vehicle roll-over, may deploy the side
and curtain air bags but not the front air
bags.
l
Rear-ending or running under a truck's
Side and curtain air bag activation
tail gate may not provide the stopping
force necessary for air bag deployment.
The severity of impact above the designed
threshold level to one side of the vehicle
(driver or passenger side areas) will cause
the side and curtain air bags on that side
to inflate, but it will not normally deploy
the front air bags.
Non-activation of front air bags
Front air bags will not normally inflate in
the following cases:
l
Collision from the rear.
Limitations to side and curtain air bag
activation
Depending on the severity of impact, the
side and curtain air bags may not inflate in
the following cases:
l
Frontal offset impact may not provide
enough side impact to deploy the side
and curtain air bags.
l
Impact to the side, but it may deploy
the side and curtain air bags.
2-51
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page64
Wednesday, July 8 2009 11:26 AM
Black plate (64,1)
Essential Safety Equipment
SRS Air Bags
l
Side impacts involving trees or poles
Non-activation of side and curtain air
bag
can cause severe cosmetic damage but
may not have enough impact force to
activate the side and curtain air bags.
The side and curtain air bags will not
normally inflate in the following cases:
l
Collision from the rear.
l
Vehicle roll-over may not provide
enough side force to deploy the side
and curtain air bags.
l
Collision from the front, but it may
deploy the front air bags.
l
Side impacts with two-wheeled
qConstant Monitoring
vehicles may not provide enough force
to deploy the side and curtain air bags.
The following components of the air bag
systems are monitored by a diagnostic
system:
l
SAS unit
Front air bag sensor
Air bag modules
Side crash sensors
l
l
l
l
Air bag/Front seat belt pretensioner
system warning light
Front seat belt pretensioners
Front passenger air bag deactivation
l
l
indicator light
Driver seat slide position sensor
Front passenger seat weight sensors
Related wiring
l
l
l
2-52
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page65
Wednesday, July 8 2009 11:26 AM
Black plate (65,1)
Essential Safety Equipment
SRS Air Bags
The diagnostic module continuously
monitors the system's readiness. This
begins when the ignition switch is turned
to the ON position and continues while
the vehicle is being driven.
qMaintenance
The air bag systems do not require regular
maintenance. But if any of the following
occurs, take your vehicle to an Authorized
Mazda Dealer as soon as possible:
l
The air bag system warning light
q
Air Bag/Front Seat Belt
Pretensioner System Warning Light
flashes.
l
The air bag system warning light
remains illuminated.
The air bag system warning light does
l
not illuminate when the ignition switch
is turned to the ON position.
The air bags have deployed.
l
l
Front passenger air bag deactivation
indicator light does not illuminate
when the ignition switch is turned to
the ON position or does not illuminate
as indicated in the chart. For more
details about this indicator light and
this chart, refer to “Front passenger
If the air bag/front seat belt pretensioner
system is working properly, the warning
light illuminates when the ignition switch
is turned to the ON position or after the
engine is cranked. The warning light turns
off after a specified period of time.
A system malfunction is indicated if the
warning light constantly flashes,
constantly illuminates or does not
illuminate at all when the ignition switch
is turned to the ON position. If any of
these occur, consult an Authorized Mazda
Dealer as soon as possible. The system
may not work in an accident.
WARNING
Never tamper with the air bag/
pretensioner systems and always have
an Authorized Mazda Dealer perform
all servicing and repairs:
Self-servicing or tampering with the
systems is dangerous. An air bag/
pretensioner could accidentally
activate or become disabled causing
serious injury or death.
2-53
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page66
Wednesday, July 8 2009 11:26 AM
Black plate (66,1)
Essential Safety Equipment
SRS Air Bags
NOTE
WARNING
If it becomes necessary to have the components
or wiring system for the supplementary
restraint system modified to accommodate a
person with certain medical conditions in
accordance with a certified physician, contact
an Authorized Mazda Dealer, refer to
Do not operate a vehicle with damaged
air bag/seat belt pretensioner system
components:
Expended or damaged air bag/seat
belt pretensioner system components
must be replaced after any collision
which caused them to deploy or
damage them. Only a trained
Authorized Mazda Dealer can fully
evaluate these systems to see that
they will work in any subsequent
accident. Driving with an expended
or damaged air bag or pretensioner
unit will not afford you the necessary
protection in the event of any
subsequent accident which could
result in serious injury or death.
Do not remove interior air bag parts:
Removing any components such as
the front seats, front dashboard, the
steering wheel or parts on the front
and rear window pillars and along
the roof edge, containing air bag
parts or sensors is dangerous. These
parts contain essential air bag
components. The air bag could
accidentally activate and cause
serious injuries. Always have an
Authorized Mazda Dealer remove
these parts.
Dispose of the air bag properly:
Improper disposal of an air bag or a
vehicle with live air bags in it can be
extremely dangerous. Unless all
safety procedures are followed, injury
can result. Ask an Authorized Mazda
Dealer how to safely dispose of an air
bag or how to scrap an air bag
equipped vehicle.
2-54
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page67
Wednesday, July 8 2009 11:26 AM
Black plate (67,1)
Knowing Your Mazda
3
Explanation of basic operations and controls; opening/closing and adjustment
of various parts.
íSome models.
3-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page68
Wednesday, July 8 2009 11:26 AM
Black plate (68,1)
Knowing Your Mazda
Doors and Locks
A code number is stamped on the plate
attached to the key set; detach this plate
and store it in a safe place (not in the
vehicle) for use if you need to make a
replacement key.
Keys
WARNING
Do not leave the key in your vehicle
with children and keep them in a place
where your children will not find or
play with them:
NOTE
l
Write down the code number and keep it in
a separate, safe and convenient place, but
not in the vehicle.
If your key is lost, consult your Authorized
Mazda Dealer and have your code number
ready.
Leaving children in a vehicle with the
key is dangerous. This could result in
someone being badly injured or even
killed. Children may find these new
kinds of keys to be an interesting toy
to play with and could cause the
power windows or other controls to
operate, or even make the vehicle
move.
l
Some types of key chains cannot be
attached to the retractable type key. In this
case, use the key ring provided with the
transmitter which has the key code number
plate attached.
NOTE
l
information regarding keys and engine
starting.
l
(With theft-deterrent system)
Refer to Theft-Deterrent System (page 3-24)
for information regarding keys and the
prevention of vehicle and vehicle contents
theft.
Key ring
The keys operate all locks.
Retractable
type key
Key code number plate
3-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page69
Wednesday, July 8 2009 11:26 AM
Black plate (69,1)
Knowing Your Mazda
Doors and Locks
Key extend/retract method (Retractable
type key)
Keyless Entry System
This system remotely locks and unlocks
the doors and the liftgate.
It can also help you signal for attention.
Press the buttons slowly and carefully.
To extend the key, press the release
button.
CAUTION
To avoid damage to the transmitter,
do not:
Ø Drop the transmitter.
Ø Get the transmitter wet.
Ø Disassemble the transmitter.
Ø Expose the transmitter to any kind
of magnetic field.
Ø Expose the transmitter to high
temperatures on places such as
the dashboard or hood, under
direct sunlight.
To retract the key, rotate it into the holder
while pressing the release button.
NOTE
l
The keyless entry system is designed to
operate up to about 2.5 m (8 ft) from the
center of the vehicle, but this may vary due
to local conditions.
l
The system does not operate when the key is
in the ignition switch.
l
Doors and the liftgate can be locked by
pressing the lock button while any other
door or the liftgate is open. However, the
hazard warning lights will not flash and the
horn will not sound.
l
If the transmitter does not operate when
pressing a button or the operation range
becomes too small, the battery may be
dead. To install a new battery, refer to
Maintenance (page 3-6).
l
Additional transmitters can be obtained at
an Authorized Mazda Dealer. Up to 3
transmitters can be used with the keyless
entry system per vehicle. Bring all
transmitters to an Authorized Mazda
Dealer when additional transmitters are
required.
3-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page70
Wednesday, July 8 2009 11:26 AM
Black plate (70,1)
Knowing Your Mazda
Doors and Locks
NOTE
l
qTransmitter
Pressing the transmitter lock button to lock
the doors while any door is open does not
sound the horn.
(Without theft-deterrent system)
The hazard warning lights will flash once
to indicate that all doors and the liftgate
are locked.
Lock button
Unlock button
l
(With theft-deterrent system)
The hazard warning lights only flash when
the theft deterrent system is armed.
The hazard warning lights do not flash if all
the doors and the liftgate are locked before
the theft-deterrent system is properly
armed.
Operation
indicator light
Panic button
NOTE
l
(U.S.A.)
Refer to the theft-deterrent system on page
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference, and (2)
this device must accept any interference
received, including interference that may
cause undesired operation.
NOTE
l
All doors and the liftgate cannot be locked
when the key is in the ignition switch.
Confirm that all doors and the liftgate are
locked visually or audibly by use of the
double click.
l
l
(CANADA)
This device complies with RSS-210 of
Industry CANADA. Operation is subject to
the following two conditions: (1) this device
may not cause interference, and (2) this
device must accept any interference,
including interference that may cause
undesired operation of the device.
Unlock button
To unlock the driver's door, press the
unlock button and the hazard warning
lights will flash twice.
To unlock all doors and the liftgate, press
the unlock button again within 5 seconds
and the hazard warning lights will flash
twice.
The operation indicator light flashes when
the buttons are pressed.
Lock button
To lock the doors and the liftgate, press
the lock button and the hazard warning
lights will flash once.
To confirm that all doors and the liftgate
have been locked, press the lock button
again within 5 seconds. If they are closed
and locked, the horn will sound and the
hazard warning lights will flash once.
3-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page71
Wednesday, July 8 2009 11:26 AM
Black plate (71,1)
Knowing Your Mazda
Doors and Locks
NOTE
(Without theft-deterrent system)
The hazard warning lights will flash twice to
indicate that all doors and the liftgate are
unlocked.
(With theft-deterrent system)
The hazard warning lights only flash when the
theft deterrent system is turned off.
The hazard warning lights do not flash unless
the theft deterrent system has been properly
turned off.
Refer to the theft-deterrent system on page
NOTE
Auto re-lock function
After unlocking with the transmitter, all doors
and the liftgate will automatically lock if one
of the doors or the liftgate is not opened within
about 30 seconds.
Panic button
If you witness from a distance someone
attempting to break into or damage your
vehicle, pressing the panic button will
activate the vehicle's alarm.
NOTE
The panic button will work whether any door
or the liftgate is open or closed.
Turning on the alarm
Pressing the panic button for 1 second or
more will trigger the alarm for about 2
minutes and 30 seconds, and the
following will occur:
l
The horn sounds intermittently.
The hazard warning lights flash.
l
Turning off the alarm
Press any button on the transmitter.
3-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page72
Wednesday, July 8 2009 11:26 AM
Black plate (72,1)
Knowing Your Mazda
Doors and Locks
2. Insert a screwdriver into the slot and
push the tab to remove the key from
the transmitter.
qTransmitter Maintenance
If the buttons on the transmitter are
inoperable and the operation indicator
light does not flash, the battery may be
dead.
Tab
Replace with a new battery before the
transmitter becomes unusable.
CAUTION
Ø Install the battery with the positive
pole ( ) facing down. Battery
leakage could occur if it is not
installed correctly.
Ø When replacing the battery, be
careful not to bend the electrical
terminals or get oil on them. Also
be careful not to get dirt in the
transmitter as it could be
damaged.
3. Insert a screwdriver into the slot and
gently pry open the transmitter.
Ø There is the danger of explosion if
the battery is not correctly
replaced.
Ø Replace only with the same type
battery (CR1620 or equivalent).
Ø Dispose of used batteries
according to the following
instructions.
Ø
Insulate the plus and minus
terminals of the battery using
cellophane or equivalent tape.
Never disassemble.
Never throw the battery into
fire and/or water.
Never deform or crush.
4. Remove the battery.
Ø
Ø
Ø
Replacing the transmitter battery
1. Unfold the key (page 3-2).
3-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page73
Wednesday, July 8 2009 11:26 AM
Black plate (73,1)
Knowing Your Mazda
Doors and Locks
5. Put in the new battery (CR1620 or
equivalent) with the positive pole (
facing down.
qService
)
If you have a problem with the keyless
entry system, consult an Authorized
Mazda Dealer.
If your transmitter is lost or stolen, bring
all remaining transmitters to an
Authorized Mazda Dealer as soon as
possible for a replacement and to make
the lost or stolen transmitter inoperative.
CAUTION
Radio equipment like this is governed
by laws in the United States.
Changes or modifications not
expressly approved by the party
responsible for compliance could void
the user's authority to operate the
equipment.
6. Align the front and back covers and
snap the transmitter shut.
7. Align the key with the transmitter as
shown in the figure, and insert the key
until a click sound is heard.
CAUTION
Insert the key into the transmitter
securely until a click sound is heard.
If it is not inserted securely, it could
detach from the transmitter.
3-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page74
Wednesday, July 8 2009 11:26 AM
Black plate (74,1)
Knowing Your Mazda
Doors and Locks
qLocking, Unlocking with Key
Door Locks
The driver's door can be locked/unlocked
with the key.
Turn the key toward the front to unlock,
toward the back to lock.
WARNING
Always take all children and pets with
you or leave a responsible person with
them:
Leaving a child or a pet unattended
in a parked vehicle is dangerous. In
hot weather, temperatures inside a
vehicle can become high enough to
cause brain damage or even death.
Do not leave the key in your vehicle
with children and keep them in a place
where your children will not find or
play with them:
Unlock
Lock
Leaving children in a vehicle with the
key is dangerous. This could result in
someone being badly injured or even
killed.
q
Locking, Unlocking with Transmitter
The doors can be locked/unlocked by
operating the keyless entry system
transmitter, refer to Keyless Entry System
(page 3-3).
Keep all doors locked when driving:
Unlocked doors in a moving vehicle
are dangerous. Passengers can fall
out if a door is accidentally opened
and can more easily be thrown out in
an accident.
qLocking, Unlocking with Door-
Lock Knob
Always close all the windows and the
moonroof, lock the doors and take the
key with you when leaving your vehicle
unattended:
Front doors
To lock either front door from the inside,
push the door-lock knob.
To unlock, pull it out.
Leaving your vehicle unlocked is
dangerous as children could lock
themselves in a hot vehicle, which
could result in death. Also, a vehicle
left unlocked becomes an easy target
for thieves and intruders.
Lock
Unlock
3-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page75
Wednesday, July 8 2009 11:26 AM
Black plate (75,1)
Knowing Your Mazda
Doors and Locks
To lock either front door with the door-
lock knob from the outside, push the
door-lock knob to the lock position and
close the door (pulling the door handle is
not required).
To lock a sliding door with the door-lock
knob from the outside, slide the door-lock
knob toward the front to the lock position
and close the door (pulling the door
handle is not required).
Door-lock knob
Door-lock
knob
NOTE
qPower Door Locks
When locking the doors using the door-lock
knob from the outside, be careful not to leave
the key inside the vehicle.
Vehicle lock-out prevention
The vehicle lock-out prevention feature
prevents you from locking yourself out of
the vehicle. With the key in the ignition
switch, all doors and the liftgate will
automatically unlock if they are locked
using the power door locks with any door
or the liftgate open.
Sliding doors
To lock a sliding door from the inside,
slide the door-lock knob toward the front.
To unlock, slide it toward the back.
Lock
Unlock
Door-lock knob
3-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page76
Wednesday, July 8 2009 11:26 AM
Black plate (76,1)
Knowing Your Mazda
Doors and Locks
Locking, unlocking with key
Locking, unlocking with door-lock
switch
All doors and the liftgate lock
automatically when the driver's door is
locked with the key.
All doors and the liftgate unlock when the
driver's door is unlocked and the key is
held in the unlock position for one second
or longer.
All doors and the liftgate lock
automatically when LOCK is pressed.
They all unlock when the unmarked part
of the door-lock switch is pressed.
Unlock
Lock
Unlock
Lock
Locking, unlocking with transmitter
All doors and the liftgate can be locked/
unlocked by operating the keyless entry
system transmitter, refer to Keyless Entry
System (page 3-3).
NOTE
Holding the key in the unlocked position in the
driver's door lock for about a second unlocks
all doors and the liftgate. To unlock only the
driver's door, insert the key into the driver's
door lock and turn the key briefly to the unlock
position and then immediately return it to the
center position.
qSliding Door Open/Close
WARNING
After closing the sliding doors, always
verify that they are securely closed:
Sliding doors not securely closed are
dangerous, if the vehicle is driven
with a sliding door not securely
closed, the door could open
unexpectedly resulting in an accident.
3-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page77
Wednesday, July 8 2009 11:26 AM
Black plate (77,1)
Knowing Your Mazda
Doors and Locks
Opening/closing from inside
CAUTION
To open, pull the inner door handle
toward the back.
To close, push the inner door handle
toward the front.
When opening/closing a sliding door,
follow the cautions below. If the
cautions are not heeded, hands, feet,
or even a head may be caught in a
door resulting in an injury.
Ø Use the door handle.
Close
Ø Keep your hands, feet, and head
away from the sliding door
openings.
Ø Make sure that there is nothing
behind the sliding doors.
Open
Ø Keep your hands and feet away
from the sliding door rails, arms
and pillars.
Pillar
Opening/closing from outside
Pull the outer door handle and slide the
door.
Door handle
Arm
Rail
NOTE
When you leave the vehicle, stop the engine
and lock the doors. And do not put valuables
in your vehicle to prevent theft.
NOTE
The right sliding door cannot fully open when
the fuel-filler lid is open. Close the fuel filler
lid before opening the sliding door.
3-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page78
Wednesday, July 8 2009 11:26 AM
Black plate (78,1)
Knowing Your Mazda
Doors and Locks
qEasy Closureí
NOTE
When closing the sliding door from the fully-
opened position and from outside the vehicle,
pull the outside door handle outward to
release the latch, and slide the door toward the
front.
The Easy Closure system automatically
closes the doors completely from the near-
shut position.
WARNING
When closing a sliding door, always
keep hands and fingers away from the
door:
Placing hands or fingers around a
sliding door is dangerous because the
door closes automatically from the
near-shut position, which could
cause hands and fingers to be
pinched and injured.
NOTE
If a door handle is pulled while the easy
closure function is operating, the easy closure
function can be stopped.
qRear Door Child Safety Locks
These locks are intended to help prevent
children from accidentally opening the
sliding doors. Use them both whenever a
child rides in the vehicle.
If you slide the child safety lock to the
lock position before closing that door, the
door cannot be opened from the inside.
The door can be opened only by pulling
the outside handle.
Unlock
Lock
3-12
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page79
Wednesday, July 8 2009 11:26 AM
Black plate (79,1)
Knowing Your Mazda
Doors and Locks
qLocking, Unlocking with Door-
Liftgate
Lock Switch
WARNING
Never allow a person to ride in the
luggage compartment:
The liftgate can be locked/unlocked by
operating the door-lock switch, refer to
Power Door Locks (page 3-9).
Allowing a person to ride in the
luggage compartment is dangerous.
The person in the luggage
compartment could be seriously
injured or killed during sudden
braking or a collision.
qOpening and Closing the Liftgate
Opening the liftgate
Pull up on the handle.
Do not drive with the liftgate open:
Exhaust gas in the cabin of a vehicle
is dangerous. An open liftgate in a
moving vehicle will cause exhaust
gas to be drawn into the cabin. This
gas contains CO (carbon monoxide),
which is colorless, odorless, and
highly poisonous, and it can cause
loss of consciousness and death.
Moreover, an open liftgate could
cause occupants to fall out in an
accident.
NOTE
The liftgate opens to a position ( ) slightly
lower than the fully open position. To fully
open the liftgate ( ), push it up around the
area indicated by the arrow. Do not apply
excessive force when pushing it up.
qLocking, Unlocking with Key
The liftgate can be locked/unlocked by
inserting the key into the driver's door key
slot, refer to Power Door Locks (page
q
Locking, Unlocking with Transmitter
The liftgate can be locked/unlocked by
operating the keyless entry system
transmitter, refer to Keyless Entry System
(page 3-3).
3-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page80
Wednesday, July 8 2009 11:26 AM
Black plate (80,1)
Knowing Your Mazda
Doors and Locks
NOTE
Closing the liftgate
If the vehicle battery is dead or there is a
malfunction in the electrical system and the
liftgate cannot be unlocked, perform the
following procedure as an emergency measure
to unlock it:
Use both hands to push the liftgate down
until the lock snaps shut. Do not slam it.
Pull up on the liftgate to make sure it is
securely latched.
1. Remove the cover on the interior surface of
the liftgate.
Cover
2. Turn the lever to the right to unlock the
liftgate.
Lever
After performing this emergency measure,
have the vehicle inspected at an Authorized
Mazda Dealer as soon as possible.
3-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page81
Wednesday, July 8 2009 11:26 AM
Black plate (81,1)
Knowing Your Mazda
Doors and Locks
qOperating the Driver's Side
Power Windows
Power Window
The ignition switch must be in the ON
position for the power windows to
operate.
Manual opening/closing
To open the window to the desired
position, lightly hold down the switch.
To close the window to the desired
position, pull up the switch.
WARNING
Make sure the opening is clear before
closing a window:
Closing power windows are
dangerous. A person's hands, head,
or even neck could be caught by the
window and result in serious injury
or even death.
Driver's window
Close
Open
This warning applies especially to
children.
Always lock all passenger power
windows with the power window lock
switch on the driver's side while
children are in the vehicle, and never
allow children to play with power
window switches:
Auto-opening
To fully open the window automatically,
press the switch completely down.
Leaving the power window switches
unlocked while children are in the
vehicle is dangerous. Power window
switches that are not locked with the
power window lock switch would
allow children to operate power
windows unintentionally which could
result in serious injury if a child's
hands, head or neck becomes caught
by the window.
To stop the window partway, lightly pull
up the switch and then release it.
CAUTION
To prevent burning out the fuse and
damaging the power window system,
do not open or close more than three
windows at once.
3-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page82
Wednesday, July 8 2009 11:26 AM
Black plate (82,1)
Knowing Your Mazda
Doors and Locks
qOperating the Passenger Power
qPower Window Lock Switch
Windows
With the lock switch in the unlocked
position (button not depressed), all power
windows on each door can be operated.
The power windows may be operated
when the power window lock switch on
the driver's door is in the unlocked
position.
With the lock switch in the locked
position (button depressed), only the
driver's side power window can be
operated.
The passenger windows may be opened or
closed by the power window master
control switches on the driver's door.
Locked position
Left rear window
Unlocked position
Front passenger's
window
Right rear window
Power window lock switch
WARNING
To open the window to the desired
position, hold down the switch.
To close the window to the desired
position, pull up the switch.
Unless a passenger needs to operate a
power window, keep the power window
lock switch in the locked position:
Unintentional power window
operation is dangerous. A person's
hands, head, or neck could be caught
by the window and result in serious
injury.
Close
Open
3-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page83
Wednesday, July 8 2009 11:26 AM
Black plate (83,1)
Knowing Your Mazda
Doors and Locks
qFuel-Filler Lid
Fuel-Filler Lid and Cap
To open, pull up the remote fuel-filler lid
release.
WARNING
When removing the fuel-filler cap,
loosen the cap slightly and wait for any
hissing to stop. Then remove it:
Fuel spray is dangerous. Fuel can
burn skin and eyes and cause illness
if ingested. Fuel spray is released
when there is pressure in the fuel
tank and the fuel-filler cap is
Remote fuel-filler
lid release
removed too quickly.
Before refueling, stop the engine, and
always keep sparks and flames away
from the filler neck:
NOTE
Fuel vapor is dangerous. It could be
ignited by sparks or flames causing
serious burns and injuries.
Additionally, use of the incorrect fuel-
filler cap or not using a fuel-filler cap
may result in fuel leak, which could
result in serious burns or death in an
accident.
The fuel-filler lid cannot be opened when the
right-side sliding door is open. Close the
sliding door to open the fuel-filler lid.
qFuel-Filler Cap
To remove the fuel-filler cap, turn it
counterclockwise.
To close the fuel-filler cap, turn it
clockwise until two or more clicks are
heard.
CAUTION
Always use only a genuine Mazda
fuel-filler cap or an approved
equivalent, available at an
Authorized Mazda Dealer. The wrong
cap can result in a serious
malfunction of the fuel and emission
control systems. It may also cause
the check engine light in the
Close
Open
instrument cluster to illuminate.
3-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page84
Wednesday, July 8 2009 11:26 AM
Black plate (84,1)
Knowing Your Mazda
Doors and Locks
Hood
WARNING
Always check that the hood is closed
and securely locked:
CAUTION
Make sure the fuel-filler cap is
tightened securely. The check engine
light may illuminate when the cap is
not tightened securely. If the light
remains on (even after you have
tightened the cap securely, driven,
and restarted the engine several
times), it may indicate a different
problem. Contact an Authorized
Mazda Dealer as soon as possible.
A hood that is not closed and
securely locked is dangerous as it
could fly open while the vehicle is
moving and block the driver's vision
which could result in a serious
accident.
qOpening the Hood
1. With the vehicle parked, pull the
release handle to unlock the hood.
2. Insert your hand into the hood opening
and slide the hood latch to the right and
lift the hood.
3-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page85
Wednesday, July 8 2009 11:26 AM
Black plate (85,1)
Knowing Your Mazda
Doors and Locks
3. Grasp the support rod in the padded
area indicated by the arrow.
qClosing the Hood
WARNING
Do not leave items in the engine
compartment:
Clip
Pad
After you have finished checking or
doing servicing in the engine
compartment, do not forget and
leave items such as tools or rags in
the engine compartment.
Tools or other items left in the engine
compartment could cause engine
damage or a fire leading to an
unexpected accident.
Support rod
4. Secure the support rod in the stay hole
indicated by the arrow to hold the hood
open.
1. Check under the hood area to make
certain all filler caps are in place and
all loose items (e.g. tools, oil
containers, etc.) have been removed.
2. Insert the support rod in its clip while
holding up the hood. Verify that the
support rod is secured in the clip before
closing the hood.
3. Close the hood so that it locks securely.
Clip
Support rod
3-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page86
Wednesday, July 8 2009 11:26 AM
Black plate (86,1)
Knowing Your Mazda
Doors and Locks
NOTE
Moonroofí
Before washing your Mazda, make sure the
moonroof is completely closed so that water
does not get inside the cabin area. After
washing your Mazda or after it rains, wipe the
water off the moonroof before operating it to
avoid water penetration which could cause
rust and water damage to your headliner.
The moonroof can be opened or closed
electrically only when the ignition switch
is in the ON position.
Slide switch
qTilt Operation
The rear of the moonroof can be tilted
open to provide more ventilation.
To fully tilt automatically, momentarily
press the rear of the tilt switch.
To stop tilting partway, press any part of
the tilt or slide switch.
Tilt switch
WARNING
To close to the desired position, press the
front of the tilt or slide switch.
Do not let passengers stand up or
extend part of their body through the
open moonroof while the vehicle is
moving:
Extending the head, arms, or other
parts of the body through the
moonroof is dangerous. The head or
arms could hit something while the
vehicle is moving. This could cause
serious injury or death.
Tilt up
Make sure the opening is clear before
closing the moonroof:
Close
Close
A closing moonroof is dangerous. The
hands, head, or even neck of a
person ―especially a child― could
be caught in it as it closes, causing
serious injury or even death.
qSlide Operation
To fully open automatically, momentarily
press the rear of the slide switch.
To stop sliding partway, press any part of
the tilt or slide switch.
3-20
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page87
Wednesday, July 8 2009 11:26 AM
Black plate (87,1)
Knowing Your Mazda
Doors and Locks
To close to the desired position, press the
front of the tilt or slide switch.
qSunshade
The sunshade can be opened and closed
by hand.
The sunshade opens automatically when
the moonroof is opened, but must be
closed by hand.
Open
Sunshade
Close
Close
q
Power Moonroof Re-set Procedure
If the battery is disconnected, the
moonroof may not operate correctly. The
moonroof will not operate correctly until
it is re-set. Carry out the following
procedure to re-set the moonroof and
resume operation:
CAUTION
Ø The sunshade does not tilt. To
avoid damaging the sunshade, do
not push up on it.
1. Turn the ignition switch to the ON
position.
Ø Do not close the sunshade while
the moonroof is opening. Trying to
force the sunshade closed could
damage it.
2. Press and hold the front of the SLIDE
switch with the moonroof closed
completely. The moonroof lowers
slightly and returns to its original
position when the re-setting is finished.
NOTE
Re-set cannot be performed with the moonroof
open. Close the moonroof completely before
re-setting.
3-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page88
Wednesday, July 8 2009 11:26 AM
Black plate (88,1)
Knowing Your Mazda
Security System
Immobilizer System
CAUTION
When starting the engine do not
allow the following, as the engine
may not start due to the electronic
signal from the ignition key not being
transmitted correctly.
The immobilizer system allows the engine
to start only with a key the system
recognizes.
If someone attempts to start the engine
with an unrecognized key, the engine will
not start, thereby helping to prevent the
theft of your vehicle.
Ø A key ring rests on the key grip.
If you have a problem with the
immobilizer system or the key, consult an
Authorized Mazda Dealer.
CAUTION
Ø Radio equipment like this is
governed by laws in the United
States.
Ø Metal parts of other keys or metal
objects touch the key grip.
Changes or modifications not
expressly approved by the party
responsible for compliance could
void the user's authority to
operate the equipment.
Ø To avoid damage to the key, do
not:
Ø Spare keys or keys for other
vehicles equipped with an
immobilizer system touch or come
near the key grip.
Ø
Ø
Ø
Drop the key.
Get the key wet.
Expose the key to any kind of
magnetic field.
Ø
Expose the key to high
temperatures on places such as
the dashboard or hood, under
direct sunlight.
Ø Devices for electronic purchases, or
security passage which touch or
come near the key.
3-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page89
Wednesday, July 8 2009 11:26 AM
Black plate (89,1)
Knowing Your Mazda
Security System
NOTE
qOperation
l
(U.S.A.)
Arming
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference, and (2)
this device must accept any interference
received, including interference that may
cause undesired operation.
The system is armed when the ignition
switch is turned from the ON to the ACC
or LOCK position.
The security indicator light in the
instrument cluster flashes every two
seconds until the system is disarmed.
l
(CANADA)
This device complies with RSS-210 of
Industry CANADA. Operation is subject to
the following two conditions: (1) this device
may not cause interference, and (2) this
device must accept any interference,
including interference that may cause
undesired operation of the device.
Disarming
l
The keys carry a unique electronic code.
The system is disarmed when the ignition
switch is turned to the ON position with
the correct ignition key.
The security indicator light illuminates for
about three seconds and goes out.
For this reason, and to assure your safety,
obtaining a replacement key requires some
waiting time. They are only available
through an Authorized Mazda Dealer.
l
Always keep a spare key, in case one is lost.
If a key is lost, contact an Authorized
Mazda Dealer as soon as possible.
If you lose a key, an Authorized Mazda
Dealer will reset the electronic codes of
your remaining keys and immobilizer
system. Bring all the remaining keys to an
Authorized Mazda Dealer to reset.
Starting the vehicle with a key that has not
been reset is not possible.
If the engine does not start with the
correct ignition key, and the security
indicator light keeps illuminating or
flashing, the system may have a
malfunction. Consult an Authorized
Mazda Dealer.
l
3-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page90
Wednesday, July 8 2009 11:26 AM
Black plate (90,1)
Knowing Your Mazda
Security System
NOTE
Theft-Deterrent Systemí
l
If the security indicator light illuminates
and stays on or flashes when the ignition
switch is turned to the ON position, the
engine will not start.
If the theft deterrent system detects an
inappropriate entry into the vehicle, which
could result in the vehicle or its contents
being stolen, the alarm alerts the
surrounding area of an abnormality by
sounding the horn and flashing the hazard
warning lights.
l
Signals from a TVor radio station, or from
a transceiver or a mobile telephone, could
interfere with your immobilizer system. If
you are using the proper key and your
engine fails to start, check the security
indicator light. If it is flashing, remove the
ignition key and wait 2 seconds or more,
then reinsert it and try starting the engine
again. If it does not start after 3 or more
tries, contact an Authorized Mazda Dealer.
Refer to Operation on page 3-24.
NOTE
l
The theft-deterrent system operates with the
key or the keyless entry system transmitter.
l
The system will not function unless it is
properly armed. To properly secure the
vehicle, always make sure all windows are
completely closed and all doors and the
liftgate are locked before leaving the
vehicle. Remember to take your key and
transmitter.
l
If the security indicator light flashes
continuously while you are driving, do not
shut off the engine. Go to an Authorized
Mazda Dealer and have it checked. If you
shut off the engine while the light is
flashing you will not be able to restart it.
l
Since the electronic codes are reset when
qOperation
repairing the immobilizer system, the keys
are needed. Bring all the existing keys to an
Authorized Mazda Dealer.
System triggering conditions
The horn sounds intermittently and the
hazard warning lights flash for about 30
seconds when the system is triggered by
any one of the following:
qModification and Add-On
Equipment
l
Mazda cannot guarantee the immobilizer
system's operation if the system has been
modified or if any add-on equipment has
been installed.
Forcing open a door, the hood or the
liftgate.
l
Unlocking a door with the door lock
switch.
l
Unlocking a door with the inside door-
lock knob (other than front passenger
side).
Opening a door by operating an inside
door-lock knob.
Opening the hood by operating the
CAUTION
To avoid damage to your vehicle, do
not modify the system or install any
add-on equipment to the immobilizer
system or the vehicle.
l
l
hood release handle.
If the system is triggered again, the lights
and horn will activate until a door or the
liftgate is unlocked with the key or with
the transmitter.
3-24
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page91
Wednesday, July 8 2009 11:26 AM
Black plate (91,1)
Knowing Your Mazda
Security System
NOTE
qTo Turn off an Armed System
If the battery goes dead while the theft-
deterrent system is armed, the horn will
activate and the hazard warning lights will
flash when the battery is charged or replaced.
An armed system can be turned off by any
one of the following methods:
l
Unlock a door with the key.
Press the unlock button on the keyless
l
entry system transmitter.
Insert the key into the ignition switch
qHow to Arm the System
l
and turn it to the ON position.
1. Remove the key from the ignition
switch.
The hazard warning lights will flash twice
to indicate that the system is turned off.
2. Make sure the hood is closed. Close
and lock all doors and the liftgate from
the outside using the key or press the
lock button on your keyless entry
system transmitter.
qTo Stop an Alarm
A triggered alarm can be turned off by
any one of the following methods:
The hazard warning lights will flash
once to indicate that the system is
armed.
l
Unlock a door with the key.
Press the unlock button on the keyless
l
The following method will also arm the
theft-deterrent system:
Close the hood and the liftgate. Press
the area on the door-lock switch
marked “LOCK” once. Close all doors.
entry system transmitter.
NOTE
If you have any problem with the theft-
deterrent system, consult an Authorized Mazda
Dealer.
The theft deterrent system can also be
armed by activating the auto re-lock
function with all the doors, the liftgate and
the hood closed.
qModification and Add-On
Equipment
Mazda cannot guarantee the theft-
deterrent system's operation if the system
has been modified or if any add-on
equipment has been installed.
NOTE
Locking the doors with the inside door-lock
knob will not arm the system.
NOTE
Auto re-lock function
CAUTION
To avoid damage to your vehicle, do
not modify the system or install any
add-on equipment to the theft-
deterrent system or the vehicle.
After unlocking with the transmitter, all doors
and the liftgate will automatically lock if one
of the doors or the liftgate is not opened within
about 30 seconds.
3-25
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page92
Wednesday, July 8 2009 11:27 AM
Black plate (92,1)
Knowing Your Mazda
Security System
qTheft-Deterrent Labels
A label indicating that your vehicle is
equipped with a Theft-Deterrent System is
in the glove compartment.
Mazda recommends that you affix it to the
lower rear corner of a front door window.
3-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page93
Wednesday, July 8 2009 11:27 AM
Black plate (93,1)
Knowing Your Mazda
Steering Wheel and Mirrors
Steering Wheel
Mirrors
qOutside Mirrors
WARNING
Never adjust the steering wheel while
the vehicle is moving:
Check the mirror angles before driving.
Mirror type
Adjusting the steering wheel while
the vehicle is moving is dangerous.
Moving it can very easily cause the
driver to abruptly turn to the left or
right. This can lead to loss of control
or an accident.
Flat type (driver's side)
Flat surface mirror.
Convex type (front passenger side)
The mirror has single curvature on its
surface.
WARNING
qSteering Wheel Adjustment
Be sure to look over your shoulder
before changing lanes:
To change the angle or length of the
steering wheel:
Changing lanes without taking into
account the actual distance of the
vehicle in the convex mirror is
dangerous. You could have a serious
accident. What you see in the convex
mirror is closer than it appears.
1. Stop the vehicle, pull up the lock
release lever under the steering
column.
Power mirror
The ignition switch must be in the ACC
or ON position.
Lock release lever
To adjust:
1. Press the left or right side of the
selector switch to choose the left or
right side mirror.
2. Tilt the steering wheel and/or adjust the
steering column length to the desired
positions, push the lever down to lock
the column.
3. Push the wheel up and down to be
certain it's locked before driving.
3-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page94
Wednesday, July 8 2009 11:27 AM
Black plate (94,1)
Knowing Your Mazda
Steering Wheel and Mirrors
2. Depress the mirror switch in the
appropriate direction.
qRearview Mirror
Rearview mirror adjustment
Selector switch
Mirror switch
Before driving, adjust the rearview mirror
to center on the scene through the rear
window.
After adjusting the mirror, lock the control
by placing the selector switch in the
middle position.
Folding the mirror
Reducing glare from headlights
Fold the outside mirror rearward until it is
flush with the vehicle.
Adjust the mirror with the day/night lever
in the day position.
Push the lever forward for day driving.
Pull it back to reduce glare from
headlights.
Day/Night lever
Day
WARNING
Night
Always return the outside mirrors to
the driving position before you start
driving:
Driving with the outside mirrors
folded in is dangerous. Your rear view
will be restricted, and you could have
an accident.
3-28
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page95
Wednesday, July 8 2009 11:27 AM
Black plate (95,1)
Knowing Your Mazda
Steering Wheel and Mirrors
WARNING
Do not stack cargo or objects higher
than the seatbacks:
Cargo stacked higher than the
seatbacks is dangerous. It can block
your view in the rearview mirror,
which might cause you to hit another
car when changing lanes.
3-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page96
Wednesday, July 8 2009 11:27 AM
Black plate (96,1)
3-30
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page97
Wednesday, July 8 2009 11:27 AM
Black plate (97,1)
Before Driving Your Mazda
4
Important information about driving your Mazda.
Towing ......................................................................................... 4-12
4-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page98
Wednesday, July 8 2009 11:27 AM
Black plate (98,1)
Before Driving Your Mazda
Fuel and Engine Exhaust Precautions
Fuel Requirements
Vehicles with catalytic converters or oxygen sensors must use ONLY UNLEADED FUEL,
which will reduce exhaust emissions and keep spark plug fouling to a minimum.
Your Mazda will perform best with fuel listed in the table.
Fuel
Octane Rating*(Anti-knock index)
Regular unleaded fuel
87 [ (R+M)/2 method] or above (91 RON or above)
* U.S. federal law requires that octane ratings be posted on gasoline station pumps.
Fuel with a rating lower than 87 octane (91 RON) could cause the emission control system
to lose effectiveness. It could also cause engine knocking and serious engine damage.
CAUTION
Ø USE ONLY UNLEADED FUEL.
Leaded fuel is harmful to the catalytic converter and oxygen sensors and will lead
to deterioration of the emission control system and or failures.
Ø Your vehicle can only use oxygenated fuels containing no more than 10 % ethanol
by volume. Damage to your vehicle may occur when ethanol exceeds this
recommendation, or if the gasoline contains any methanol. Stop using gasohol of
any kind if your vehicle engine is performing poorly.
Ø Never add fuel system additives. Never add cleaning agents other than those
specified by Mazda. Other cleaning agents and additives may damage the system.
Consult an Authorized Mazda Dealer.
Gasoline blended with oxygenates such as alcohol or ether compounds are generally
referred to as oxygenated fuels. The common gasoline blend that can be used with your
vehicle is ethanol blended at no more than 10%. Gasoline containing alcohol, such as
ethanol or methanol, may be marketed under the name “Gasohol”.
Vehicle damage and drivability problems resulting from the use of the following may not
be covered by the Mazda warranty.
l
Gasohol containing more than 10% ethanol.
Gasoline or gasohol containing methanol.
Leaded fuel or leaded gasohol.
l
l
4-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page99
Wednesday, July 8 2009 11:27 AM
Black plate (99,1)
Before Driving Your Mazda
Fuel and Engine Exhaust Precautions
Emission Control System
Your vehicle is equipped with an emission control system (the catalytic converter is part of
this system) that enables your vehicle to comply with existing exhaust emissions
requirements.
WARNING
Never park over or near anything flammable:
Parking over or near anything flammable, such as dry grass, is dangerous. Even with
the engine turned off, the exhaust system remains very hot after normal use and
could ignite anything flammable. A resulting fire could cause serious injury or death.
CAUTION
Ignoring the following precautions could cause lead to accumulate on the catalyst
inside the converter or cause the converter to get very hot. Either condition will
damage the converter and cause poor performance.
Ø USE ONLY UNLEADED FUEL.
Ø Do not drive your Mazda with any sign of engine malfunction.
Ø Do not coast with the ignition switch turned off.
Ø Do not descend steep grades in gear with the ignition switch turned off.
Ø Do not operate the engine at high idle for more than 2 minutes.
Ø Do not tamper with the emission control system. All inspections and adjustments
must be made by a qualified technician.
Ø Do not push-start or pull-start your vehicle.
NOTE
Under U.S. federal law, any modification to the original-equipment emission control system before
the first sale and registration of a vehicle is subject to penalties. In some states, such modification
made on a used vehicle is also subject to penalties.
NOTE
While the engine is off, the sound of a valve opening and closing can be heard at the middle rear of
the vehicle, however this does not indicate an abnormality. Your vehicle has a self-checking device
and it operates while the engine is off.
4-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page100
Wednesday, July 8 2009 11:27 AM
Black plate (100,1)
Before Driving Your Mazda
Fuel and Engine Exhaust Precautions
Engine Exhaust (Carbon Monoxide)
WARNING
Do not drive your vehicle if you smell exhaust gas inside the vehicle:
Engine exhaust gas is dangerous. This gas contains carbon monoxide (CO), which is
colorless, odorless, and poisonous. When inhaled, it can cause loss of consciousness
and death. If you smell exhaust gas inside your vehicle, keep all windows fully open
and contact an Authorized Mazda Dealer immediately.
Do not run the engine when inside an enclosed area:
Running the engine inside an enclosed area, such as a garage, is dangerous. Exhaust
gas, which contains poisonous carbon monoxide, could easily enter the cabin. Loss
of consciousness or even death could occur.
Open the windows or adjust the heating or cooling system to draw fresh air when
idling the engine:
Exhaust gas is dangerous. When your vehicle is stopped with the windows closed
and the engine running for a long time even in an open area, exhaust gas, which
contains poisonous carbon monoxide, could enter the cabin. Loss of consciousness or
even death could occur.
Clear snow from underneath and around your vehicle, particularly the tail pipe,
before starting the engine:
Running the engine when a vehicle is stopped in deep snow is dangerous. The
exhaust pipe could be blocked by the snow, allowing exhaust gas to enter the cabin.
Because exhaust gas contains poisonous carbon monoxide, it could cause loss of
consciousness or even death to occupants in the cabin.
4-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page101
Wednesday, July 8 2009 11:27 AM
Black plate (101,1)
Before Driving Your Mazda
Before Starting the Engine
Before Getting In
After Getting In
l
l
l
l
Be sure the windows, outside mirrors,
and outside lights are clean.
Inspect inflation pressures and
condition of tires.
Look under the vehicle for any sign of
fluid leaks.
If you plan to back up, make sure
nothing is in your way.
Are all doors closed and locked?
Is the seat adjusted properly?
Are the inside and outside mirrors
adjusted?
Is the steering wheel adjusted properly?
Is everyone's seat belt fastened?
Check all gauges.
Check all warning lights when the
ignition switch is turned to the ON
position.
Release the parking brake and make
sure the brake warning light goes off.
l
l
l
l
l
l
l
NOTE
Engine oil, engine coolant, brake/clutch fluid,
washer fluid, and other fluid levels should be
inspected. See Maintenance, Section 8.
l
Always be thoroughly familiar with your
Mazda.
4-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page102
Wednesday, July 8 2009 11:27 AM
Black plate (102,1)
Before Driving Your Mazda
Driving Tips
Break-In Period
Money-Saving Suggestions
No special break-in is necessary, but a few
precautions in the first 1,000 km (600
miles) may add to the performance,
economy, and life of your Mazda.
How you operate your Mazda determines
how far it will travel on a tank of fuel. Use
these suggestions to help save money on
fuel and repairs.
l
l
Do not race the engine.
Do not maintain one constant speed,
Avoid long warm-ups. Once the engine
l
runs smoothly, begin driving.
Avoid fast starts.
Keep the engine tuned. Follow the
l
either slow or fast, for a long period of
time.
Do not drive constantly at full-throttle
l
l
have an Authorized Mazda Dealer
perform inspections and servicing.
or high engine rpm for extended
periods of time.
Avoid unnecessary hard stops.
l
l
Use the air conditioner only when
l
Avoid full-throttle starts.
necessary.
Slow down on rough roads.
Keep the tires properly inflated.
Do not carry unnecessary weight.
l
l
l
l
Do not rest your foot on the brake
pedal while driving.
Keep the wheels in correct alignment.
Keep windows closed at high speeds.
Slow down when driving in crosswinds
l
l
l
and headwinds.
WARNING
Never stop the engine when going
down a hill:
Stopping the engine when going
down a hill is dangerous. This causes
the loss of power steering and power
brake control, and may cause
damage to the drivetrain. Any loss of
steering or braking control could
cause an accident.
4-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page103
Wednesday, July 8 2009 11:27 AM
Black plate (103,1)
Before Driving Your Mazda
Driving Tips
Hazardous Driving
Floor Mat
WARNING
WARNING
Be extremely careful if it is necessary to
downshift on slippery surfaces:
Downshifting into lower gear while
driving on slippery surfaces is
Make sure the floor mats are hooked
on the retention pins to prevent them
from bunching up under the foot
pedals:
dangerous. The sudden change in tire
speed could cause the tires to skid.
This could lead to loss of vehicle
control and an accident.
Using a floor mat that is not secured
is dangerous as it will interfere with
the accelerator and brake pedal
operation, which could result in an
accident.
Do not rely on ABS as a substitute for
safe driving:
Do not install two floor mats, one on
top of the other, on the driver's side:
Installing two floor mats, one on top
of the other, on the driver's side is
dangerous as the retention pins can
only keep one floor mat from sliding
forward.
The ABS cannot compensate for
unsafe and reckless driving, excessive
speed, tailgating (following another
vehicle too closely), driving on ice and
snow, and hydroplaning (reduced tire
friction and road contact because of
water on the road surface). You can
still have an accident.
In using a heavy duty floor mat for
winter use always remove the
original floor mat.
Loose floor mat(s) will interfere with
the foot pedal and could result in an
accident.
When driving on ice or in water, snow,
mud, sand, or similar hazards:
l
Be cautious and allow extra distance
for braking.
Avoid sudden braking and sudden
l
maneuvering.
Do not pump the brakes. Continue to
l
press down on the brake pedal.
Refer to Anti-Lock Brake System
(ABS) on page 5-8.
l
If you get stuck, select a lower gear and
accelerate slowly. Do not spin the front
wheels.
For more traction in starting on
l
slippery surfaces such as ice or packed
snow, use sand, rock salt, chains,
carpeting, or other nonslip material
under the front wheels.
When setting a floor mat, position the
floor mat so that its eyelets are inserted
over the pointed end of the retention
posts.
NOTE
Use snow chains only on the front wheels.
4-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page104
Wednesday, July 8 2009 11:27 AM
Black plate (104,1)
Before Driving Your Mazda
Driving Tips
Rocking the Vehicle
Winter Driving
l
Carry emergency gear, including tire
chains, window scraper, flares, a small
shovel, jumper cables, and a small bag
of sand or salt.
WARNING
Do not spin the wheels at more than 56
km/h (35 mph), and do not allow
anyone to stand behind a wheel when
pushing the vehicle:
Ask an Authorized Mazda Dealer to
perform the following precautions:
When the vehicle is stuck, spinning
the wheels at high speed is
dangerous. The spinning tire could
overheat and explode. This could
cause serious injuries.
l
Have the proper ratio of antifreeze in
the radiator.
Refer to Engine Coolant on page 8-20.
Inspect the battery and its cables. Cold
l
reduces battery capacity.
Inspect the ignition system for damage
l
and loose connections.
Use washer fluid made with
antifreeze―but do not use engine
coolant antifreeze for washer fluid
(page 8-24).
CAUTION
Too much rocking may cause engine
overheating, transaxle failure, and
tire damage.
l
l
Do not use the parking brake in
If you must rock the vehicle to free it from
snow, sand or mud, depress the
accelerator slightly and slowly move the
shift lever from 1 (D) to R.
freezing weather as it may freeze.
Instead, shift to P with an automatic
transaxle and to 1 or R with a manual
transaxle. Block the rear wheels.
l
Do not apply excessive force to a
window scraper when removing ice or
frozen snow on the mirror glass and
windshield.
l
Never use warm or hot water for
removing snow or ice from windows
and mirrors as it could result in the
glass cracking.
4-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page105
Wednesday, July 8 2009 11:27 AM
Black plate (105,1)
Before Driving Your Mazda
Driving Tips
qSnow Tires
qTire Chains
Use snow tires on all four wheels
Check local regulations before using tire
chains.
Do not go faster than 120 km/h (75 mph)
while driving with snow tires. Inflate
snow tires 30 kPa (0.3 kgf/cm2, 4.3 psi)
more than recommended on the tire
pressure label (driver's door frame), but
never more than the maximum cold-tire
pressure shown on the tires.
Your vehicle is originally equipped with
all season radials designed to be used all
year around. In some extreme climates
you may find it necessary to replace them
with snow tires during the winter months
to further improve traction on snow and
ice covered roads.
CAUTION
Ø Chains may affect handling.
Ø Do not go faster than 50 km/h (30
mph) or the chain manufacturer's
recommended limit, whichever is
lower.
Ø Drive carefully and avoid bumps,
holes, and sharp turns.
Ø Avoid locked-wheel braking.
Ø Do not use chains on a temporary
spare tire; it may result in damage
to the vehicle and to the tire.
Ø Do not use chains on roads that
are free of snow or ice. The tires
and chains could be damaged.
Ø Chains may scratch or chip
aluminum wheels.
WARNING
Use only the same size and type tires
(snow, radial, or non-radial) on all four
wheels:
Using tires different in size or type is
dangerous. Your vehicle's handling
could be greatly affected and result
in an accident.
NOTE
If your vehicle is equipped with the tire
pressure monitoring system, the system may
not function correctly when using tire chains.
CAUTION
Check local regulations before using
studded tires.
Install the chains on the front tires.
Do not use chains on the rear tires.
Use only genuine Mazda tire chains.
Please consult an Authorized Mazda
Dealer.
NOTE
If your vehicle is equipped with the tire
pressure monitoring system, the system may
not function correctly when using tires with
steel wire reinforcement in the sidewalls (page
Installing the chains
1. Remove the wheel covers, or the chain
bands will scratch them.
2. Secure the chains on the front tires as
tightly as possible. Always follow the
chain manufacturer's instructions.
3. Retighten the chains after driving 1/2
―1 km (1/4―1/2 mile).
4-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page106
Wednesday, July 8 2009 11:27 AM
Black plate (106,1)
Before Driving Your Mazda
Driving Tips
Driving In Flooded Area
Overloading
WARNING
WARNING
Dry wet brakes by driving very slowly
and applying the brakes lightly until
brake performance returns to normal:
Driving with wet brakes is
Be careful not to overload your vehicle:
The gross axle weight rating (GAWR)
and the gross vehicle weight rating
(GVWR) of your vehicle are on the
Motor Vehicle Safety Standard Label
on the driver's door frame. Exceeding
these ratings can cause an accident
or vehicle damage. You can estimate
the weight of your load by weighing
the items (or people) before putting
them in the vehicle.
dangerous. Increased stopping
distance or the vehicle pulling to one
side when braking could result in a
serious accident. Light braking will
indicate whether the brakes have
been affected.
CAUTION
Do not drive the vehicle on flooded
roads as it could cause short
circuiting of electrical/electronic
parts, or engine damage or stalling
from water absorption. If the vehicle
has been immersed in water, consult
an Authorized Mazda Dealer.
4-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page107
Wednesday, July 8 2009 11:27 AM
Black plate (107,1)
Before Driving Your Mazda
Driving Tips
Driving on Uneven Road
Your vehicle's suspension and underbody can be damaged if driven on rough/uneven roads
or over speed bumps at excessive speeds. Use care and reduce speed when traveling on
rough/uneven roads or over speed bumps.
Use care not to damage the vehicle's underbody, bumpers or muffler(s) when driving under
the following conditions:
l
Ascending or descending a slope with a sharp transition angle
Ascending or descending a driveway or trailer ramp with a sharp transition angle
l
Your vehicle is equipped with low profile tires allowing class-leading performance and
handling. As a result, the sidewall of the tires are very thin and the tires and wheels can be
damaged if driven through potholes or on rough/uneven roads at excessive speeds. Use
care and reduce speed when traveling on rough/uneven roads or through potholes.
4-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page108
Wednesday, July 8 2009 11:27 AM
Black plate (108,1)
Before Driving Your Mazda
Towing
Trailer Towing
The Mazda5 is not designed for towing.
Never tow a trailer with your Mazda5.
4-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page110
Wednesday, July 8 2009 11:27 AM
Black plate (110,1)
Driving Your Mazda
Starting and Driving
Automatic transaxle
Ignition Switch
To turn the key from the ACC to the
LOCK position, the shift lever must be in
the P position.
qIgnition Switch Positions
Shift lever
engaged in
P (park)
LOCK
The steering wheel locks to protect
against theft. Only in this position can the
key be removed.
Manual transaxle
To turn the key from the ACC to the
LOCK position, push the button when the
key is at the ACC position, then turn the
key to the LOCK position.
Button
5-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page111
Wednesday, July 8 2009 11:27 AM
Black plate (111,1)
Driving Your Mazda
Starting and Driving
ON
WARNING
This is the normal running position after
the engine is started. Some indicator
lights/warning lights should be inspected
before the engine is started (page 5-37).
Remove the key only when the vehicle
is parked:
Removing the key from the ignition
switch while the vehicle is moving is
dangerous. Removing the key allows
the steering wheel to lock. You will
lose steering control and a serious
accident could occur.
NOTE
When the ignition switch is turned to the ON
position, the sound of the fuel pump motor
operating near the fuel tank can be heard. This
does not indicate an abnormality.
Before leaving the driver's seat, always
put the key to LOCK position, set the
parking brake and make sure the shift
lever is in P with an automatic
transaxle or in 1 or R with a manual
transaxle:
START
The engine is started in this position. It
will crank until you release the key. It
then returns to the ON position.
It is important to place the key in the
LOCK position even if you are not
removing the key from the ignition or
leaving the vehicle. Leaving the key
in other positions will disable some of
the vehicle security systems and run
the battery down.
qIgnition Key Reminder
If the ignition switch is in the LOCK or
ACC position with the key inserted, a
continuous beep sound will be heard
when the driver's door is opened.
Leaving the driver's seat without
putting the ignition switch in LOCK
position, setting the parking brake
and shifting the shift lever to P with
an automatic transaxle, or to 1 or R
with a manual transaxle is
dangerous. Unexpected vehicle
movement could occur. This could
cause an accident.
NOTE
If turning the key is difficult, jiggle the steering
wheel from side to side.
Leaving the key in any position but LOCK
position also disables some of the security
features and may run the battery down.
ACC (Accessory)
The steering wheel unlocks and some
electrical accessories will operate.
5-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page112
Wednesday, July 8 2009 11:27 AM
Black plate (112,1)
Driving Your Mazda
Starting and Driving
6. After starting the engine, let it idle for
about 10 seconds.
Starting the Engine
NOTE
NOTE
Engine-starting is controlled by the spark
ignition system.
This system meets all Canadian Interference-
Causing Equipment Standard requirements
regulating the impulse electrical field strength
of radio noise.
l
In extremely cold weather or after the
vehicle has not been driven in several days,
let the engine warm up without operating
the accelerator.
l
Whether the engine is cold or warm, it
should be started without use of the
accelerator.
1. Occupants should fasten their seat
belts.
l
If the engine does not start the first time,
refer to Starting a Flooded Engine under
Emergency Starting. If the engine still does
not start, have your vehicle inspected by an
Authorized Mazda Dealer (page 7-15).
2. Make sure the parking brake is on.
3. Depress the brake pedal.
4. (Manual transaxle)
Depress the clutch pedal all the way
and shift into neutral.
Keep the clutch pedal depressed while
cranking the engine.
(Automatic transaxle)
Put the vehicle in park (P). If you must
restart the engine while the vehicle is
moving, shift into neutral (N).
NOTE
(Manual transaxle)
The starter will not operate unless the clutch is
depressed sufficiently.
(Automatic transaxle)
The starter will not operate if the shift lever is
not in P or N.
5. Turn the ignition switch to the START
position and hold (up to 10 seconds at
a time) until the engine starts.
CAUTION
Do not try the starter for more than
10 seconds at a time. If the engine
stalls or fails to start, wait 10 seconds
before trying again. Otherwise, you
may damage the starter and drain
the battery.
5-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page113
Wednesday, July 8 2009 11:27 AM
Black plate (113,1)
Driving Your Mazda
Starting and Driving
Turning Off the Engine
Brake System
1. Stop the vehicle completely.
qFoot Brake
2. (Manual transaxle)
Shift into neutral.
Your Mazda has power-assisted brakes
that adjust automatically through normal
use.
(Automatic transaxle)
Shift the shift lever to the P position.
Should power-assist fail, you can stop by
applying greater force than normal to the
brake pedal. But the distance required to
stop will be greater than usual.
3. Turn the ignition switch from the ON
position to the LOCK position.
CAUTION
When leaving the vehicle, make sure
the ignition switch is turned to the
LOCK position.
5-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page114
Wednesday, July 8 2009 11:27 AM
Black plate (114,1)
Driving Your Mazda
Starting and Driving
qParking Brake
WARNING
Do not coast with the engine stalled or
turned off, find a safe place to stop:
Coasting with the engine stalled or
turned off is dangerous. Braking will
require more effort, and the brake's
power-assist could be depleted if you
pump the brake. This will cause
longer stopping distances or even an
accident.
WARNING
Before leaving the driver's seat, always
put the key to LOCK position, set the
parking brake and make sure the shift
lever is in P with an automatic
transaxle or in 1 or R with a manual
transaxle:
It is important to place the key in the
LOCK position even if you are not
removing the key from the ignition or
leaving the vehicle. Leaving the key
in other positions will disable some of
the vehicle security systems and run
the battery down.
Leaving the driver's seat without
putting the ignition switch in LOCK
position, setting the parking brake
and shifting the shift lever to P with
an automatic transaxle, or to 1 or R
with a manual transaxle is
Shift to a lower gear when going down
steep hills:
Driving with your foot continuously
on the brake pedal or steadily
applying the brakes for long
distances is dangerous. This causes
overheated brakes, resulting in
longer stopping distances or even
total brake failure. This could cause
loss of vehicle control and a serious
accident. Avoid continuous
dangerous. Unexpected vehicle
movement could occur. This could
cause an accident.
application of the brakes.
Dry brakes that have become wet by
driving very slowly and applying the
brakes lightly until brake performance
is normal:
CAUTION
Driving with the parking brake on
will cause excessive wear of the brake
linings or pads.
Driving with wet brakes is
dangerous. Increased stopping
distance or the vehicle pulling to one
side when braking could result in a
serious accident. Light braking will
indicate whether the brakes have
been affected.
NOTE
For parking in snow, refer to Winter Driving
5-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page115
Wednesday, July 8 2009 11:27 AM
Black plate (115,1)
Driving Your Mazda
Starting and Driving
Setting the parking brake
qBrake System Warning Light
Depress the brake pedal and then firmly
pull the parking brake lever fully upwards
with sufficient force to hold the vehicle in
a stationary position.
This warning has the following functions:
Parking brake warning
The light illuminates when the parking
brake is applied with the ignition switch
in the START or ON position. It turns off
when the parking brake is fully released.
Low brake fluid level warning
If the light stays on after the parking brake
is fully released, you may have a brake
problem.
Releasing the parking brake
Depress the brake pedal and pull the
parking brake lever upwards, then press
the release button. While holding the
button, lower the parking brake lever all
the way down to the released position.
Drive to the side of the road and park off
the right-of-way.
You may notice that the pedal is harder to
depress or that it may go closer to the
floor. In either case, it will take longer to
stop the vehicle.
1. With the engine stopped, open the
hood and check the brake fluid level
immediately, and then add fluid if
required (page 8-22).
2. After adding fluid, check the light
again.
If the warning light remains on, or if the
brakes do not operate properly, do not
drive the vehicle. Have it towed to an
Authorized Mazda Dealer.
Even if the light turns off have your brake
system inspected as soon as possible by
an Authorized Mazda Dealer.
5-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page116
Wednesday, July 8 2009 11:27 AM
Black plate (116,1)
Driving Your Mazda
Starting and Driving
NOTE
WARNING
Do not rely on ABS as a substitute for
safe driving:
Having to add brake fluid is sometimes an
indicator of leakage. Consult an Authorized
Mazda Dealer as soon as possible even if the
brake light is no longer illuminated.
The ABS cannot compensate for
unsafe and reckless driving, excessive
speed, tailgating (following another
vehicle too closely), driving on ice and
snow, and hydroplaning (reduced tire
friction and road contact because of
water on the road surface). You can
still have an accident.
WARNING
Do not drive with the brake system
warning light illuminated. Contact an
Authorized Mazda Dealer to have the
brakes inspected as soon as possible:
Driving with the brake system
warning light illuminated is
NOTE
dangerous. It indicates that your
brakes may not work at all or that
they could completely fail at any
time. If this light remains
l
Braking distances may be longer on loose
surfaces (snow or gravel, for example)
which usually have a hard foundation. A
vehicle with a normal braking system may
require less distance to stop under these
conditions because the tires will build up a
wedge of surface layer when the wheels
skid.
illuminated, after checking that the
parking brake is fully released, have
the brakes inspected immediately.
l
qAnti-Lock Brake System (ABS)
The sound of the ABS operating may be
heard when starting the engine or
immediately after starting the vehicle.
However, it does not indicate a malfunction.
The ABS control unit continuously
monitors the speed of each wheel. If one
is about to lock up, the ABS responds by
automatically releasing and reapplying
that wheel's brake.
qABS Warning Light
The driver will feel a slight vibration in
the brake pedal and may hear a chattering
noise from the brake system. This is
normal when the ABS operates. Continue
to depress the brake pedal without
pumping the brakes.
The warning light stays on for a few
seconds when the ignition switch is turned
to the ON position.
5-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page117
Wednesday, July 8 2009 11:27 AM
Black plate (117,1)
Driving Your Mazda
Starting and Driving
If the ABS warning light stays on while
you're driving, the ABS control unit has
detected a system malfunction. If this
occurs, your brakes will function normally
as if the vehicle had no ABS.
WARNING
Do not drive with both the ABS warning
light and brake warning light
illuminated. Have the vehicle towed to
an Authorized Mazda Dealer to have
the brakes inspected as soon as
possible:
Should this happen, consult an Authorized
Mazda Dealer as soon as possible.
NOTE
Driving when the brake system
warning light and ABS warning light
are illuminated simultaneously is
dangerous.
When both lights are illuminated, the
rear wheels could lock more quickly
in an emergency stop than under
normal circumstances.
When the engine is jump-started to charge the
battery, uneven rpm occurs and the ABS
warning light may illuminate. If this occurs, it
is the result of the weak battery and does not
indicate an ABS malfunction.
Recharge the battery.
qElectronic Brake Force
Distribution System Warning
qBrake Assist
During emergency braking situations
when it is necessary to depress the brake
pedal with greater force, the brake assist
system provides braking assistance, thus
enhancing braking performance.
When the brake pedal is depressed hard or
depressed more quickly, the brakes apply
more firmly.
If the electronic brake force distribution
control unit determines that some
components are operating incorrectly, the
control unit may illuminate the brake
system warning light and the ABS
warning light on simultaneously. The
problem is likely to be the electronic
brake force distribution system.
NOTE
l
When the brake pedal is depressed hard or
depressed more quickly, the pedal will feel
softer but the brakes will apply more firmly.
This is a normal effect of the brake assist
operation and does not indicate an
abnormality.
l
When the brake pedal is depressed hard or
depressed more quickly, a clicking noise
from the brake booster may be heard. This
is a normal effect of the brake assist and
does not indicate an abnormality.
l
The brake assist equipment does not
supersede the functionality of the vehicle's
main braking system.
5-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page118
Wednesday, July 8 2009 11:27 AM
Black plate (118,1)
Driving Your Mazda
Starting and Driving
Manual Transaxle Operation
WARNING
Do not use sudden engine braking on
slippery road surfaces or at high
speeds:
qManual Transaxle Shift Pattern
Shifting down while driving on wet,
snowy, or frozen roads, or while
driving at high speeds causes sudden
engine braking, which is dangerous.
The sudden change in tire speed
could cause the tires to skid. This
could lead to loss of vehicle control
and an accident.
Neutral position
Be sure to leave the shift lever in 1 or R
position and set the parking brake
when leaving the vehicle unattended:
Otherwise the vehicle could move
and cause an accident.
The shift pattern of the transaxle is
conventional, as shown.
Depress the clutch pedal all the way down
while shifting; then release it slowly.
CAUTION
Ø Keep your foot off the clutch pedal
except when shifting gears. Also,
do not use the clutch to hold the
vehicle on an upgrade. Riding the
clutch will cause needless clutch
wear and damage.
A safety feature prevents accidental
shifting from 5 to R (reverse). The shift
lever must be put in neutral before being
shifted to R.
Ø Do not apply any excessive lateral
force to the gear lever when
changing from 5th to 4th gear.
This could lead to the accidental
selection of 2nd gear, which can
result in damage to the transaxle.
Ø Make sure the vehicle comes to a
complete stop before shifting to R.
Shifting to R while the vehicle is
still moving may damage the
transaxle.
NOTE
If shifting to R is difficult, shift back into
neutral, release the clutch pedal, and try
again.
5-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page119
Wednesday, July 8 2009 11:27 AM
Black plate (119,1)
Driving Your Mazda
Starting and Driving
qRecommendations for Shifting
Upshifting
For normal acceleration, we recommend
these shift points.
Gear
Vehicle speed
21 km/h (13 mph)
1 to 2
2 to 3
3 to 4
4 to 5
39 km/h (24 mph)
55 km/h (34 mph)
78 km/h (49 mph)
For cruising
Gear
1 to 2
Vehicle speed
18 km/h (11 mph)
29 km/h (18 mph)
47 km/h (29 mph)
68 km/h (42 mph)
2 to 3
3 to 4
4 to 5
Downshifting
When you must slow down in heavy
traffic or on a steep upgrade, downshift
before the engine starts to overwork. This
reduces the chance of stalling and gives
better acceleration when you need more
speed.
On a steep downgrade, downshifting
helps maintain safe speed and prolongs
brake life.
5-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page120
Wednesday, July 8 2009 11:27 AM
Black plate (120,1)
Driving Your Mazda
Starting and Driving
Automatic Transaxle Controls
Various Lockouts:
Indicates that you must depress the brake pedal to shift (The ignition
switch must be in the ON position).
Indicates the shift lever can be shifted freely into any position.
NOTE
The Sport AT has an option that is not included in the traditional automatic transaxle giving the
driver the option of selecting each gear instead of leaving it to the transaxle to shift gears. Even if
you intend to use the automatic transaxle functions as a traditional automatic, you should also be
aware that you can inadvertently shift into manual shift mode and an inappropriate gear may be
retained as the vehicle speed increases. If you notice the engine speed going higher or hear the
engine racing, confirm you have not accidentally slipped into manual shift mode (page 5-14).
5-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page121
Wednesday, July 8 2009 11:27 AM
Black plate (121,1)
Driving Your Mazda
Starting and Driving
qTransaxle Ranges
WARNING
If the engine is running faster than idle,
do not shift from N or P into a driving
gear:
The shift lever must be in P or N to
operate the starter.
P (Park)
It's dangerous to shift from N or P
into a driving gear when the engine
is running faster than idle. If this is
done, the vehicle could move
suddenly, causing an accident or
serious injury.
P locks the transaxle and prevents the
front wheels from rotating.
WARNING
Always set the shift lever to P and set
the parking brake:
Do not shift into N when driving the
vehicle:
Only setting the shift lever to the P
position without using the parking
brake to hold the vehicle is
dangerous. If P fails to hold, the
vehicle could move and cause an
accident.
Shifting into N while driving is
dangerous. Engine braking cannot be
applied when decelerating which
could lead to an accident or serious
injury.
CAUTION
Ø Shifting into P, N or R while the
vehicle is moving can damage
your transaxle.
Ø Shifting into a driving gear or
reverse when the engine is running
faster than idle can damage the
transaxle.
CAUTION
Do not shift into N when driving the
vehicle. Doing so can cause transaxle
damage.
NOTE
Apply the parking brake or depress the brake
pedal before moving the shift lever from N to
prevent the vehicle from moving unexpectedly.
R (Reverse)
In position R, the vehicle moves only
backward. You must be at a complete stop
before shifting to or from R, except under
rare circumstances as explained in
D (Drive)
D is the normal driving position. From a
stop, the transaxle will automatically shift
through a 5-gear sequence.
M (Manual)
N (Neutral)
M is the manual shift mode position.
Gears can be shifted up or down by
operating the shift lever.
In N, the wheels and transaxle are not
locked. The vehicle will roll freely even
on the slightest incline unless the parking
brake or brakes are on.
Refer to Manual Shift Mode (page 5-14).
5-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page122
Wednesday, July 8 2009 11:27 AM
Black plate (122,1)
Driving Your Mazda
Starting and Driving
4. Take the vehicle to an Authorized
Mazda Dealer to have the system
checked.
qShift-Lock System
The shift-lock system prevents shifting
out of P unless the brake pedal is
depressed.
qManual Shift Mode
To shift from P:
This mode gives you the feel of driving a
manual transaxle vehicle by operating the
shift lever and allows you to control
engine rpm and torque to the front wheels
much like a manual transaxle when more
control is desired.
1. Depress and hold the brake pedal.
2. Start the engine.
3. Move the shift lever.
NOTE
l
To change to manual shift mode, shift the
lever from D to M.
When the ignition switch is in the LOCK
position, the shift lever cannot be shifted
from P.
NOTE
l
To be sure the vehicle is in park, the
ignition key cannot be removed unless the
shift lever is in P.
Changing to manual mode can be done while
driving the vehicle with no damage occurring
to the transaxle.
qShift-Lock Override
If the shift lever will not move from P
using the proper shift procedure, continue
to hold down the pedal.
1. Remove the shift-lock override cover
using a cloth-wrapped flat head
screwdriver.
2. Insert a screwdriver and push it down.
To return to automatic shift mode, shift
the lever from M to D.
Cover
NOTE
l
If you change to manual shift mode when
the vehicle is stopped, the gear will shift to
M1.
l
If you change to manual shift mode without
depressing the accelerator pedal when
driving in D range, 5th gear, the gear will
shift to M4.
3. Move the shift lever.
5-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page123
Wednesday, July 8 2009 11:27 AM
Black plate (123,1)
Driving Your Mazda
Starting and Driving
Indicators
Shifting
Shift position indicator
Manually Shifting up
In manual shift mode, the “M” of the shift
position indicator in the instrument panel
illuminates.
(M1→M2→M3→M4→M5)
To shift up to a higher gear, tap the shift
lever back ( ) once.
Gear position indicator
The numeral for the selected gear
illuminates.
Shift position indicator
NOTE
l
When driving slowly, the gears may not
Gear position indicator
shift up depending on vehicle speed.
l
In manual shift mode, gears do not shift up
automatically. Do not run the engine with
the tachometer needle in the RED ZONE. If
the tachometer needle enters the RED
ZONE, you may feel engine-braking
because the fuel delivery will be stopped to
protect the engine. However, this does not
indicate an abnormality.
When depressing the accelerator fully, the
transaxle will shift to a lower gear,
depending on vehicle speed.
NOTE
l
If the gears cannot be shifted down when
driving at higher speeds, the gear position
indicator will flash twice to signal that the
gears cannot be shifted down.
l
If the automatic transaxle fluid (ATF)
temperature becomes too high, there is the
possibility that the transaxle will switch to
automatic shift mode, canceling manual
shift mode and turning off the gear position
indicator illumination. This is a normal
function to protect the AT. After the ATF
temperature has decreased, the gear
position indicator illumination turns back
on and driving in manual shift mode is
restored.
l
5-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page124
Wednesday, July 8 2009 11:27 AM
Black plate (124,1)
Driving Your Mazda
Starting and Driving
Manually Shifting down
Second gear fixed mode
When the shift lever is tapped back (
(M5→M4→M3→M2→M1)
To shift down to a lower gear, tap the shift
lever forward ( ) once.
)
while the vehicle is stopped or driven at
20 km/h (12 mph) or less, the transaxle is
set in the second gear fixed mode. The
gear is fixed in second while in this mode
for easier starting and driving on slippery
roads. If the shift lever is tapped back (
or forward ( ) while in the second gear
fixed mode, the mode will be canceled.
)
Shifting specification
Shifting up
If the vehicle speed is lower than the
speed specified for each gear, the gear
cannot be shifted up to a higher gear.
Gear
Vehicle speed
WARNING
You can shift up to M2 whether the
vehicle is stopped or moving.
Do not use engine braking on slippery
road surfaces or at high speeds:
Shifting down while driving on wet,
snowy, or frozen roads, or while
driving at high speeds causes sudden
engine braking, which is dangerous.
The sudden change in tire speed
could cause the tires to skid. This
could lead to loss of vehicle control
and an accident.
M1→M2
M2→M3
M3→M4
M4→M5
20 km/h (12 mph)
33 km/h (20 mph)
34 km/h (21 mph)
Shifting down
If the vehicle speed is higher than the
speed specified for each gear, the gear
cannot be shifted to a lower gear so as to
protect the transaxle.
NOTE
Gear
M5→M4
Vehicle speed
203 km/h (126 mph)
137 km/h (85 mph)
89 km/h (55 mph)
44 km/h (27 mph)
l
When driving at high speeds, the gear may
not shift down depending on vehicle speed.
M4→M3
M3→M2
M2→M1
l
During deceleration, the gear may
automatically shift down depending on
vehicle speed.
During deceleration, the gears shift down
automatically when speed is reduced to
the following:
l
When depressing the accelerator fully, the
transaxle will shift to a lower gear,
depending on vehicle speed.
Gear
Vehicle speed
30 km/h (19 mph)
10 km/h (6 mph)
M5 or M4→M3
M3 or M2→M1
5-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page125
Wednesday, July 8 2009 11:27 AM
Black plate (125,1)
Driving Your Mazda
Starting and Driving
NOTE
Passing
The gear does not shift down to M1
automatically while in the second gear fixed
mode.
For extra power when passing another
vehicle or climbing steep grades, depress
the accelerator fully. The transaxle will
shift to a lower gear, depending on vehicle
speed.
Recommendations for shifting
Upshifting
Climbing steep grades from a stop
For normal acceleration and cruising, we
recommend these shift points.
To climb a steep grade from a stopped
position:
Gear
M1 to M2
M2 to M3
M3 to M4
M4 to M5
Vehicle speed
24 km/h (15 mph)
1. Depress the brake pedal.
40 km/h (25 mph)
65 km/h (40 mph)
73 km/h (45 mph)
2. Shift to D or M1, depending on the
load weight and grade steepness.
3. Release the brake pedal while
gradually accelerating.
Downshifting
When you must slow down in heavy
traffic or on a steep upgrade, downshift
before the engine starts to overwork. This
gives better acceleration when you need
more speed.
Descending steep grades
When descending a steep grade, shift to
lower gears, depending on load weight
and grade steepness. Descend slowly,
using the brakes only occasionally to
prevent them from overheating.
On a steep downgrade, downshifting
helps maintain safe speed and prolongs
brake life.
qDriving Tips
WARNING
Do not allow the vehicle to move in
reverse on an up-slope while the
selector lever is in a forward gear
position, or move forward on a down-
slope while the selector lever is in the
reverse position.
Otherwise, the engine will stop,
causing the loss of the power brake
and power steering functions, and
make it difficult to control the vehicle
which could result in an accident.
5-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page126
Wednesday, July 8 2009 11:27 AM
Black plate (126,1)
Driving Your Mazda
Starting and Driving
If the light remains illuminated after the
engine is started, or illuminates while
driving, turn off the engine after parking
in a safe place, and then start the engine
again.
If the light does not illuminate after
restarting the engine, this indicates that
the power steering is restored and normal
steering is possible.
Power Steering
Power steering is only operable when the
engine is running. If the engine is off or if
the power steering system is inoperable,
you can still steer, but it requires more
physical effort.
If the steering feels stiffer than usual
during normal driving, consult an
Authorized Mazda Dealer.
If the light remains illuminated, the power
steering is still inoperable. Consult an
Authorized Mazda Dealer.
CAUTION
NOTE
l
The power steering system is inoperable
Never hold the steering wheel to the
extreme left or right for more than 5
seconds with the engine running.
This could damage the power
steering system.
when the power steering malfunction
indicator light illuminates. Steering is
possible, but requires more physical effort.
l
Repeatedly jerking the steering wheel left
and right while the vehicle is stopped or
moving extremely slowly will cause the
power steering system to go into protective
mode which will make the steering feel
heavy, but this does not indicate a
qPower Steering Malfunction
Indicator Light
malfunction. If this occurs, park the vehicle
safely and wait a few minutes for the system
to return to normal.
This indicator light illuminates when the
ignition switch is turned to the ON
position, and turns off when the engine is
started.
5-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page127
Wednesday, July 8 2009 11:27 AM
Black plate (127,1)
Driving Your Mazda
Starting and Driving
qActivation/Deactivation
Cruise Controlí
To activate the system, press the ON/OFF
switch.
The cruise main indicator light
illuminates.
With cruise control, you can set and
automatically maintain any speed of more
than about 30 km/h (19 mph).
WARNING
Do not use the cruise control under the
following conditions:
To deactivate the system, press the switch
again.
The cruise main indicator light turns off.
Using the cruise control under the
following conditions is dangerous
and could result in loss of vehicle
control.
Ø Hilly terrain
Ø Steep inclines
Ø Heavy or unsteady traffic
Ø Slippery or winding roads
Ø Similar restrictions that require
inconsistent speed
qCruise Main Indicator Light
(Amber)/Cruise Set Indicator
Light (Green)
WARNING
Keep the ON/OFF switch off when
cruise control is not in use:
Leaving the ON/OFF switch on when
not using the cruise control is
dangerous as you may hit one of the
other buttons and put the vehicle in
cruise control unexpectedly. This
could result in loss of vehicle control.
The indicator light has two colors.
Cruise Main Indicator Light (Amber)
qTo Set Speed
The indicator light illuminates amber
when the ON/OFF switch is pressed and
the cruise control system is activated.
1. Activate the cruise control system by
pressing the ON/OFF switch.
2. Accelerate to the desired speed, which
must be more than 30 km/h (19 mph).
Cruise Set Indicator Light (Green)
The indicator light illuminates green when
a cruising speed has been set.
íSome models.
5-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page128
Wednesday, July 8 2009 11:27 AM
Black plate (128,1)
Driving Your Mazda
Starting and Driving
3. Press the SET/- switch and release it at
the speed you want. Release the
accelerator simultaneously.
qTo Increase Cruising Speed
Follow either of these procedures.
To increase speed using cruise control
switch
Press the RES/+ switch and hold it. Your
vehicle will accelerate.
Release the switch at the speed you want.
Do not continue to hold in the button.
Until you release it, speed will continue to
drop (unless you continue to accelerate)
and you'll miss the desired speed.
NOTE
l
The SET function cannot be activated until
about 2 seconds after the ON/OFF switch
has been engaged.
On a steep grade, the vehicle may
momentarily slow down while ascending,
or speed up while descending.
Your vehicle has a tap-up feature that
allows you to increase your current speed
in increments of 1.6 km/h (1 mph) by a
momentary tap of the RES/+ switch.
Multiple taps will increase your vehicle
speed 1.6 km/h (1 mph) for each tap.
l
l
Cruise control will turn off if vehicle speed
drops below 30 km/h (19 mph) when cruise
is activated, such as when climbing a steep
grade.
5-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page129
Wednesday, July 8 2009 11:27 AM
Black plate (129,1)
Driving Your Mazda
Starting and Driving
To increase speed using accelerator
pedal
Your vehicle has a tap-down feature that
allows you to decrease your current speed
in decrements of 1.6 km/h (1 mph) by a
momentary tap of the SET/- switch.
Multiple taps will decrease your vehicle
speed 1.6 km/h (1 mph) for each tap.
Depress the accelerator pedal to accelerate
to the desired speed.
Press the SET/- switch and release it
immediately.
qTo Resume Cruising Speed at
More Than 30 km/h (19 mph)
If some other method besides the ON/
OFF switch was used to cancel cruising
speed (such as applying the brake pedal)
and the system is still activated, the most
recent set speed will automatically resume
when the RES/+ switch is pressed.
If vehicle speed is below 30 km/h (19
mph), increase the vehicle speed up to 30
km/h (19 mph) or more and press the
RES/+ switch.
NOTE
Accelerate if you want to speed up temporarily
when the cruise control is on. Greater speed
will not interfere with or change the set speed.
Take your foot off the accelerator to return to
the set speed.
qTo Decrease Cruising Speed
Press the SET/- switch and hold it. The
vehicle will gradually slow.
Release the switch at the speed you want.
qTo Cancel
To cancel the system, use one of these
methods:
l
Press the ON/OFF switch.
Slightly depress the brake pedal.
Depress the clutch pedal (Manual
l
l
transaxle only).
5-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page130
Wednesday, July 8 2009 11:27 AM
Black plate (130,1)
Driving Your Mazda
Starting and Driving
l
Press the CANCEL switch.
Traction Control System
(TCS)í
The Traction Control System (TCS)
enhances traction and safety by
controlling engine torque and braking.
When the TCS detects driving wheel
slippage, it lowers engine torque and
operates the brakes to prevent loss of
traction.
This means that on a slick surface, the
engine adjusts automatically to provide
optimum power to the drive wheels,
limiting wheel spin and loss of traction.
The system turns off when the ignition is
off.
NOTE
Cruise control will cancel at about 15 km/h (9
mph) below the preset speed (such as may
happen when climbing a long, steep grade) or
below 30 km/h (19 mph).
WARNING
Do not rely on the traction control
system as a substitute for safe driving:
The traction control system (TCS)
cannot compensate for unsafe and
reckless driving, excessive speed,
tailgating (following another vehicle
too closely), and hydroplaning
(reduced tire friction and road
contact because of water on the road
surface). You can still have an
accident.
Use snow tires or tire chains and drive
at reduced speeds when roads are
covered with ice and/or snow:
Driving without proper traction
devices on snow and/or ice-covered
roads is dangerous. The traction
control system (TCS) alone cannot
provide adequate traction and you
could still have an accident.
NOTE
To turn off the TCS, press the DSC OFF switch
(page 5-24).
5-22
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page131
Wednesday, July 8 2009 11:27 AM
Black plate (131,1)
Driving Your Mazda
Starting and Driving
qTCS/DSC Indicator Light
Dynamic Stability Control
(DSC)í
The Dynamic Stability Control (DSC)
automatically controls braking and engine
torque in conjunction with systems such
as ABS and TCS to help control side slip
when driving on slippery surfaces, or
during sudden or evasive maneuvering,
enhancing vehicle safety.
This indicator light stays on for a few
seconds when the ignition switch is turned
to the ON position. If the TCS or DSC is
operating, the indicator light flashes.
If the light stays on, the TCS or DSC may
have a malfunction and they may not
operate correctly. Take your vehicle to an
Authorized Mazda Dealer.
DSC operation is possible at speeds
greater than 20 km/h (12 mph).
WARNING
NOTE
Do not rely on the dynamic stability
control as a substitute for safe driving:
The dynamic stability control (DSC)
cannot compensate for unsafe and
reckless driving, excessive speed,
tailgating (following another vehicle
too closely), and hydroplaning
(reduced tire friction and road
contact because of water on the road
surface). You can still have an
accident.
l
In addition to the indicator light flashing, a
slight lugging sound will come from the
engine. This indicates that the TCS is
operating properly.
l
On slippery surfaces, such as fresh snow, it
will be impossible to achieve high rpm
when the TCS is on.
íSome models.
5-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page132
Wednesday, July 8 2009 11:27 AM
Black plate (132,1)
Driving Your Mazda
Starting and Driving
qDSC OFF Indicator Light
CAUTION
Ø The DSC may not operate correctly
unless the following are observed:
Ø
Ø
Ø
Use tires of the correct size
specified for your Mazda on all
four wheels.
Use tires of the same
manufacturer, brand and tread
pattern on all four wheels.
Do not mix worn tires.
This indicator light stays on for a few
seconds when the ignition switch is turned
to the ON position.
It also illuminates when the DSC OFF
switch is pressed and TCS/DSC is
switched off (page 5-24).
Ø The DSC may not operate correctly
when tire chains are used or a
temporary spare tire is installed
because the tire diameter changes.
If the light stays on when the TCS/DSC is
not switched off, take your vehicle to an
Authorized Mazda Dealer. The dynamic
stability control may have a malfunction.
NOTE
After turning the ignition switch to the ON
position, a clicking sound may be heard behind
the dashboard. This sound is the result of the
DSC system self-check operation and does not
indicate an abnormality.
qDSC OFF Switch
To turn off the TCS/DSC, press and hold
the DSC OFF switch until the DSC OFF
indicator light illuminates.
qTCS/DSC Indicator Light
This indicator light stays on for a few
seconds when the ignition switch is turned
to the ON position. If the TCS or DSC is
operating, the indicator light flashes.
If the light stays on, the TCS or DSC may
have a malfunction and they may not
operate correctly. Take your vehicle to an
Authorized Mazda Dealer.
Press the switch again to turn the TCS/
DSC back on. The DSC OFF indicator
light will go out.
5-24
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page133
Wednesday, July 8 2009 11:27 AM
Black plate (133,1)
Driving Your Mazda
Starting and Driving
NOTE
l
When DSC is on and you attempt to free the
vehicle when it is stuck, or drive it out of
freshly fallen snow, the TCS (part of the
DSC system) will activate. Depressing the
accelerator will not increase engine power
and freeing the vehicle may be difficult.
When this happens, turn off the TCS/DSC.
l
If the TCS/DSC is off when the engine is
turned off, it automatically activates when
the ignition switch is turned on.
l
Leaving the TCS/DSC on will provide the
best stability.
5-25
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page134
Wednesday, July 8 2009 11:27 AM
Black plate (134,1)
Driving Your Mazda
Starting and Driving
Tire Pressure Monitoring Systemí
The tire pressure monitoring system (TPMS) monitors the pressure for each tire.
If tire pressure is too low in one or more tires, the system will inform the driver via the
warning light in the instrument panel and by the warning beep sound.
The tire pressure sensors installed on each wheel send tire pressure data by radio signal to
the receiver unit in the vehicle.
Tire pressure sensors
NOTE
When the ambient temperature is low due to seasonal changes, tire temperatures are also lower.
When the tire temperature decreases, the air pressure decreases as well. The TPMS warning light
may illuminate more frequently. Visually inspect the tires daily before driving, and check tire
pressures monthly with a tire pressure gauge. When checking tire pressures, use of a digital tire
pressure gauge is recommended.
TPMS does not alleviate your need to check the pressure and condition of all four tires
regularly.
5-26
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page135
Wednesday, July 8 2009 11:27 AM
Black plate (135,1)
Driving Your Mazda
Starting and Driving
CAUTION
Ø Each tire, including the spare (if provided), should be checked monthly when cold
and inflated to the inflation pressure recommended by the vehicle manufacturer
on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a
different size than the size indicated on the vehicle placard or tire inflation
pressure label, you should determine the proper tire inflation pressure for those
tires.)
As an added safety feature, your vehicle has been equipped with a tire pressure
monitoring system (TPMS) that illuminates a low tire pressure telltale when one
or more of your tires is significantly under-inflated. Accordingly, when the low tire
pressure telltale illuminates, you should stop and check your tires as soon as
possible, and inflate them to the proper pressure. Driving on a significantly under-
inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation
also reduces fuel efficiency and tire tread life, and may affect the vehicle's
handling and stopping ability.
Please note that the TPMS is not a substitute for proper tire maintenance, and it
is the driver's responsibility to maintain correct tire pressure, even if under-
inflation has not reached the level to trigger illumination of the TPMS low tire
pressure telltale.
Ø Your vehicle has also been equipped with a TPMS malfunction indicator to
indicate when the system is not operating properly.
The TPMS malfunction indicator is combined with the low tire pressure telltale.
When the system detects a malfunction, the telltale will flash for approximately
one minute and then remain continuously illuminated. This sequence will
continue upon subsequent vehicle start-ups as long as the malfunction exists.
When the malfunction indicator is illuminated, the system may not be able to
detect or signal low tire pressure as intended. TPMS malfunctions may occur for a
variety of reasons, including the installation of replacement or alternate tires or
wheels on the vehicle that prevent the TPMS from functioning properly. Always
check the TPMS malfunction telltale after replacing one or more tires or wheels on
your vehicle to ensure that the replacement or alternate tires and wheels allow
the TPMS to continue to function properly.
Ø To avoid false readings, the system samples for a little while before indicating a
problem. As a result it will not instantaneously register a rapid tire deflation or
blow out.
NOTE
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
5-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page136
Wednesday, July 8 2009 11:27 AM
Black plate (136,1)
Driving Your Mazda
Starting and Driving
qTire Pressure Monitoring System
WARNING
Warning Light
If the tire pressure monitoring system
warning light illuminates or flashes, or
the tire pressure warning beep sound is
heard, decrease vehicle speed
immediately and avoid sudden
maneuvering and braking:
If the tire pressure monitoring system
warning light illuminates or flashes,
or the tire pressure warning beep
sound is heard, it is dangerous to
drive the vehicle at high speeds, or
perform sudden maneuvering or
braking. Vehicle drivability could
worsen and result in an accident.
To determine if you have a slow leak
or a flat, pull over to a safe position
where you can check the visual
condition of the tire and determine if
you have enough air to proceed to a
place where air may be added and
the system monitored again by an
Authorized Mazda Dealer or a tire
repair station.
This warning light illuminates for a few
seconds when the ignition switch is turned
to the ON position.
Thereafter, the warning light illuminates
and a beep is heard when tire pressure is
too low in one or more tires, and flashes
when there is a system malfunction.
Do not ignore the TPMS Warning Light:
Ignoring the TPMS warning light is
dangerous, even if you know why it is
illuminated. Have the problem taken
care of as soon as possible before it
develops into a more serious
situation that could lead to tire
failure and a dangerous accident.
Warning light illuminates/Warning
beep sounds
When the warning light illuminates, and
the warning beep sound is heard (about 3
seconds), tire pressure is too low in one or
more tires.
5-28
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page137
Wednesday, July 8 2009 11:27 AM
Black plate (137,1)
Driving Your Mazda
Starting and Driving
Adjust the tire pressure to the correct tire
pressure. Refer to the specification charts
(page 10-6).
NOTE
l
Perform tire pressure adjustment when the
tires are cold. Tire pressure will vary
according to the tire temperature, therefore
let the vehicle stand for 1 hour or only drive
it 1.6 km (1 mile) or less before adjusting
the tire pressures. When pressure is
adjusted on hot tires to the cold inflation
pressure, the TPMS warning light/beep may
turn on after the tires cool and pressure
drops below specification.
CAUTION
When replacing/repairing the tires or
wheels or both, have the work done
by an Authorized Mazda Dealer, or
the tire pressure sensors may be
damaged.
Also, an illuminated TPMS warning light,
resulting from the tire air pressure dropping
due to cold ambient temperature, may turn
off if the ambient temperature rises. In this
case, it will also be necessary to adjust the
tire air pressures. If the TPMS warning
light illuminates due to a drop in tire air
pressure, make sure to check and adjust the
tire air pressures.
l
After adjusting the tire air pressures, it may
require some time for the TPMS warning
light to turn off. If the TPMS warning light
remains illuminated, drive the vehicle at a
speed of at least 25 km/h (16 mph) for 10
minutes, and then verify that it turns off.
Tires lose air naturally over time and the
TPMS cannot tell if the tires are getting too
soft over time or you have a flat. However,
when you find one low tire in a set of four-
that is an indication of trouble; you should
have someone drive the vehicle slowly
forward so you can inspect any low tire for
cuts and any metal objects sticking through
tread or sidewall. Put a few drops of water
in the valve stem to see if it bubbles
l
indicating a bad valve. Leaks need to be
addressed by more than simply refilling the
trouble tire as leaks are dangerous - take it
to an Authorized Mazda Dealer which has
all the equipment to fix tires, TPMS systems
and order the best replacement tire for your
vehicle.
5-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page138
Wednesday, July 8 2009 11:27 AM
Black plate (138,1)
Driving Your Mazda
Starting and Driving
l
l
l
l
If the warning light illuminates again even
after the tire pressures are adjusted, there
may be a tire puncture. Replace the
punctured tire with the temporary spare
tire (page 7-7).
When the tire pressure sensor batteries
are exhausted.
When using a wheel with no tire
pressure sensor installed.
When using tires with steel wire
reinforcement in the side walls.
When using tire chains.
NOTE
A tire pressure sensor is not installed to the
temporary spare tire. The warning light will
flash continuously while the temporary spare
tire is being used.
qTires and Wheels
CAUTION
Warning light flashes
When inspecting or adjusting the tire
air pressures, do not apply excessive
force to the stem part of the wheel
unit. The stem part could be
damaged.
When the warning light flashes, there may
be a system malfunction. Consult an
Authorized Mazda Dealer.
qSystem Error Activation
Changing tires and wheels
When the warning light flashes, there may
be a system malfunction. Consult an
Authorized Mazda Dealer.
The following procedure allows the
TPMS to recognize a tire pressure sensor's
unique ID signal code whenever tires or
wheels are changed, such as changing to
and from winter tires.
A system error activation may occur in
the following cases:
l
When there is equipment or a device
NOTE
near the vehicle using the same radio
frequency as that of the tire pressure
sensors.
When a large metallic object (e.g. a
large electric household appliance or a
desk-top computer) is placed on the
right side of the rear seat, which may
block radio signals from the tire
Each tire pressure sensor has a unique ID
signal code. The signal code must be
registered with the TPMS before it can work.
The easiest way to do it is to have an
Authorized Mazda Dealer change your tire and
complete ID signal code registration.
l
When having tires changed at an
Authorized Mazda Dealer
pressure sensor to the receiver unit.
When using the following devices in
the vehicle that may cause radio
interference with the receiver unit.
l
When an Authorized Mazda Dealer
changes your vehicle's tires, they will
complete the tire pressure sensor ID signal
code registration.
l
A digital device such as a personal
computer.
A current converter device such as a
l
DC-AC converter.
l
When excess snow or ice adheres to
the vehicle, especially around the
wheels.
5-30
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page139
Wednesday, July 8 2009 11:27 AM
Black plate (139,1)
Driving Your Mazda
Starting and Driving
When changing tires yourself
Be sure to have the tire pressure sensors
installed whenever tires or wheels are
replaced.
If you or someone else changes tires, you
or someone else can also undertake the
steps for the TPMS to complete the ID
signal code registration.
When having a tire or wheel or both
replaced, the following types of tire
pressure sensor installations are possible.
l
1. After tires have been changed, turn the
ignition switch to the ON position, then
turn it back to the ACC or LOCK
position.
The tire pressure sensor is removed
from the old wheel and installed to the
new one.
The same tire pressure sensor is used
l
with the same wheel. Only the tire is
replaced.
A new tire pressure sensor is installed
2. Wait for about 15 minutes.
l
3. After about 15 minutes, drive the
vehicle at a speed of at least 25 km/h
(16 mph) for 10 minutes and the tire
pressure sensor ID signal code will be
registered automatically.
to a new wheel.
NOTE
l
The tire pressure sensor ID signal code
must be registered when a new tire pressure
sensor is purchased. For purchase of a tire
pressure sensor and registration of the tire
pressure sensor ID signal code, consult an
Authorized Mazda Dealer.
NOTE
If the vehicle is driven within about 15 minutes
of changing tires, the tire pressure monitoring
system warning light will flash because the
sensor ID signal code would not have been
registered. If this happens, park the vehicle for
about 15 minutes, after which the sensor ID
signal code will register upon driving the
vehicle for 10 minutes.
l
When reinstalling a previously removed tire
pressure sensor to a wheel, replace the
grommet (seal between valve body/sensor
and wheel) for the tire pressure sensor.
Replacing tires and wheels
CAUTION
Ø When replacing/repairing the tires
or wheels or both, have the work
done by an Authorized Mazda
Dealer, or the tire pressure sensors
may be damaged.
Ø The wheels equipped on your
Mazda are specially designed for
installation of the tire pressure
sensors. Do not use non-genuine
wheels, otherwise it may not be
possible to install the tire pressure
sensors.
5-31
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page141
Wednesday, July 8 2009 11:27 AM
Black plate (141,1)
Driving Your Mazda
Instrument Cluster and Indicators
qSpeedometer
The speedometer indicates the speed of
the vehicle.
qOdometer, Trip Meter and Trip
Odometer
Meter Selector
The display mode can be changed
between trip meter A and trip meter B by
pressing the selector while one of them is
displayed. The selected mode will be
displayed.
Trip meter A
Press the selector
Odometer
Trip meter B
Odometer
Press the selector
Trip meter
Selector
NOTE
When the ignition switch is in the ACC or
LOCK position, the odometer or trip meters
cannot be displayed, however, pressing the
selector button can inadvertently switch the
trip meters or reset them during an
approximate ten-minute period in the following
cases:
l
After the ignition switch is turned to the
ACC or LOCK position from the ON
position.
l
After the driver's door is opened.
Odometer
The odometer records the total distance
the vehicle has been driven.
Trip meter
The trip meter can record the total
distance of two trips. One is recorded in
trip meter A, and the other is recorded in
trip meter B.
5-33
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page142
Wednesday, July 8 2009 11:27 AM
Black plate (142,1)
Driving Your Mazda
Instrument Cluster and Indicators
For instance, trip meter A can record the
distance from the point of origin, and trip
meter B can record the distance from
where the fuel tank is filled.
qTachometer
The tachometer shows engine speed in
thousands of revolutions per minute
(rpm).
When trip meter A is selected, pressing
the selector again within one second will
change to trip meter B mode.
Red zone
When trip meter A is selected, TRIP A
will be displayed. When trip meter B is
selected, TRIP B will be displayed.
The trip meter records the total distance
the vehicle is driven until the meter is
again reset. Return it to “0.0” by holding
the selector depressed for 1 second or
more. Use this meter to measure trip
distances and to compute fuel
CAUTION
Do not run the engine with the
tachometer needle in the RED ZONE.
This may cause severe engine
damage.
consumption.
NOTE
l
Only the trip meters record tenths of
kilometers (miles).
l
The trip record will be erased when:
q
Engine Coolant Temperature Gauge
l
The power supply is interrupted (blown
fuse or the battery is disconnected).
The vehicle is driven over 999.9 km
(mile).
The engine coolant temperature gauge
shows the temperature of the engine
coolant.
l
If the needle is near H, it indicates
overheating.
5-34
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page143
Wednesday, July 8 2009 11:27 AM
Black plate (143,1)
Driving Your Mazda
Instrument Cluster and Indicators
qDashboard Illumination
CAUTION
Driving with an overheated engine
can cause serious engine damage
(page 7-13).
Rotate the knob to adjust the brightness of
the instrument cluster and other
illuminations in the dashboard.
NOTE
l
The brightness of dashboard illuminations
can be adjusted when the headlight switch
qFuel Gauge
The fuel gauge shows approximately how
much fuel is remaining in the tank when
the ignition switch is in the ON position.
We recommend keeping the tank over 1/4
full. When the low fuel warning light
illuminates or when the needle is near E,
refuel as soon as possible.
is in the
or
position.
l
l
When the dashboard illumination
brightness cannot be adjusted any more, a
beep sound will be heard.
The brightness of the instrument cluster
illumination can be adjusted when the
headlight switch is in any position.
Dim
Low fuel
warning light
Bright
Full
Approx. 1/4 Full
NOTE
Canceling the illumination dimmer
l
After refueling, it may require some time for
the needle to stabilize. In addition, the
needle may deviate while driving on a slope
or curve since the fuel moves in the tank.
When the headlight switch is in the or
position, the illumination of the
instrument cluster and the information
display dims.
l
The direction of the arrow (
) shows next
to the low fuel warning light indicates that
the fuel-filler lid is on the right side of the
vehicle.
When driving on snowy or foggy roads,
or in other situations when the instrument
cluster or information display's visibility
is reduced due to glare from surrounding
brightness, cancel the illumination
dimmer and increase the illumination
intensity.
5-35
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page144
Wednesday, July 8 2009 11:27 AM
Black plate (144,1)
Driving Your Mazda
Instrument Cluster and Indicators
To cancel the illumination dimmer, rotate
the knob clockwise fully. You will hear a
beep sound and the illumination dimmer
will be canceled.
NOTE
l
This symbol ( ) indicates the knob to
adjust the brightness of the dashboard
illumination.
l
If the dashboard illumination knob is kept
at the illumination dimmer cancel position,
the instrument cluster and the information
display will not dim when the headlight
switch is turned to the
again.
or
position
5-36
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page145
Wednesday, July 8 2009 11:27 AM
Black plate (145,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
Warning/Indicator Lights
Warning/Indicator lights will appear in any of the highlighted areas
Signal
Warning/Indicator Lights
Brake System Warning Light
Page
Charging System Warning Light
Engine Oil Pressure Warning Light
Check Engine Light
ABS Warning Light
Air Bag/Front Seat Belt Pretensioner System Warning Light
Low Fuel Warning Light
5-37
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page146
Wednesday, July 8 2009 11:27 AM
Black plate (146,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
Signal
Warning/Indicator Lights
Seat Belt Warning Light/Beep
Page
Door-Ajar Warning Light
Low Washer Fluid Level Warning Light
Automatic Transaxle Warning Light
Tire Pressure Monitoring System Warning Light
Security Indicator Light
Headlight High-Beam Indicator Light
Shift Position Indicator Light
TCS/DSC Indicator Light
DSC OFF Indicator Light
Cruise Main Indicator Light (Amber)/Cruise Set Indicator Light (Green)
Lights-On Indicator Light
Power Steering Malfunction Indicator Light
Turn Signal/Hazard Warning Indicator Lights
5-38
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page147
Wednesday, July 8 2009 11:27 AM
Black plate (147,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
NOTE
qBrake System Warning Light
Having to add brake fluid is sometimes an
indicator of leakage. Consult an Authorized
Mazda Dealer as soon as possible even if the
brake light is no longer illuminated.
WARNING
Do not drive with the brake system
warning light illuminated. Contact an
Authorized Mazda Dealer to have the
brakes inspected as soon as possible:
Driving with the brake system
This warning has the following functions:
Parking brake warning
The light illuminates when the parking
brake is applied with the ignition switch
in the START or ON position. It turns off
when the parking brake is fully released.
warning light illuminated is
dangerous. It indicates that your
brakes may not work at all or that
they could completely fail at any
time. If this light remains
Low brake fluid level warning
If the light stays on after the parking brake
is fully released, you may have a brake
problem.
illuminated, after checking that the
parking brake is fully released, have
the brakes inspected immediately.
Drive to the side of the road and park off
the right-of-way.
qABS Warning Light
You may notice that the pedal is harder to
depress or that it may go closer to the
floor. In either case, it will take longer to
stop the vehicle.
1. With the engine stopped, open the
hood and check the brake fluid level
immediately, and then add fluid if
required (page 8-22).
The warning light stays on for a few
seconds when the ignition switch is turned
to the ON position.
2. After adding fluid, check the light
again.
If the ABS warning light stays on while
you're driving, the ABS control unit has
detected a system malfunction. If this
occurs, your brakes will function normally
as if the vehicle had no ABS.
If the warning light remains on, or if the
brakes do not operate properly, do not
drive the vehicle. Have it towed to an
Authorized Mazda Dealer.
Should this happen, consult an Authorized
Mazda Dealer as soon as possible.
Even if the light turns off have your brake
system inspected as soon as possible by
an Authorized Mazda Dealer.
5-39
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page148
Wednesday, July 8 2009 11:27 AM
Black plate (148,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
NOTE
qCharging System Warning Light
When the engine is jump-started to charge the
battery, uneven rpm occurs and the ABS
warning light may illuminate. If this occurs, it
is the result of the weak battery and does not
indicate an ABS malfunction.
Recharge the battery.
qElectronic Brake Force
This warning light illuminates when the
ignition switch is turned to the ON
position and turns off when the engine is
started.
Distribution System Warning
If the warning light illuminates while
driving, it indicates a malfunction of the
alternator or of the charging system.
Drive to the side of the road and park off
the right-of-way. Consult an Authorized
Mazda Dealer.
If the electronic brake force distribution
control unit determines that some
components are operating incorrectly, the
control unit may illuminate the brake
system warning light and the ABS
warning light on simultaneously. The
problem is likely to be the electronic
brake force distribution system.
CAUTION
Do not continue driving when the
charging system warning light is
illuminated because the engine could
stop unexpectedly.
WARNING
q
Engine Oil Pressure Warning Light
Do not drive with both the ABS warning
light and brake warning light
illuminated. Have the vehicle towed to
an Authorized Mazda Dealer to have
the brakes inspected as soon as
possible:
Driving when the brake system
warning light and ABS warning light
are illuminated simultaneously is
dangerous.
When both lights are illuminated, the
rear wheels could lock more quickly
in an emergency stop than under
normal circumstances.
This warning light illuminates when the
ignition switch is turned to the ON
position and turns off when the engine is
started.
This warning light indicates low engine
oil pressure.
5-40
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page149
Wednesday, July 8 2009 11:27 AM
Black plate (149,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
If the light illuminates while driving:
The check engine light may illuminate in
the following cases:
1. Drive to the side of the road and park
off the right-of-way on level ground.
l
The fuel tank level being very low or
approaching empty.
The engine's electrical system has a
l
2. Turn off the engine and wait 5 minutes
for the oil to drain back into the oil
pan.
problem.
The emission control system has a
l
problem.
The fuel-filler cap is missing or not
3. Inspect the engine oil level (page 8-19).
If it's low, add the appropriate amount
of engine oil while being careful not to
overfill.
l
tightened securely.
If the check engine light remains on or
flashes continuously, do not drive at high
speeds and consult an Authorized Mazda
Dealer as soon as possible.
4. Start the engine and check the warning
light.
If the light remains illuminated even after
you add oil, stop the engine immediately
and have your vehicle towed to an
Authorized Mazda Dealer.
q
Air Bag/Front Seat Belt
Pretensioner System Warning Light
CAUTION
Do not run the engine if the oil
pressure is low. It could result in
extensive engine damage.
qCheck Engine Light
If the air bag/front seat belt pretensioner
system is working properly, the warning
light illuminates when the ignition switch
is turned to the ON position or after the
engine is cranked. The warning light turns
off after a specified period of time.
A system malfunction is indicated if the
warning light constantly illuminates or
does not illuminate at all when the
ignition switch is turned to the ON
position. If any of these occur, consult an
Authorized Mazda Dealer as soon as
possible. The system may not work in an
accident.
This indicator light illuminates when the
ignition switch is turned to the ON
position and turns off when the engine is
started.
If this light illuminates while driving, the
vehicle may have a problem. It is
important to note the driving conditions
when the light illuminated and consult an
Authorized Mazda Dealer.
5-41
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page150
Wednesday, July 8 2009 11:27 AM
Black plate (150,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
Conditions of operation
WARNING
Condition
Result
Never tamper with the air bag/
pretensioner systems and always have
an Authorized Mazda Dealer perform
all servicing and repairs:
The driver's seat belt is not The warning light
fastened when the ignition flashes and a beep
switch is turned to the ON sound will be heard
position.
for about 6 seconds.
Self-servicing or tampering with the
systems is dangerous. An air bag/
pretensioner could accidentally
activate or become disabled causing
serious injury or death.
The driver's seat belt is
fastened while the warning
light and the beep sound are
activated.
The warning light
turns off and the beep
sound stops.
The driver's seat belt is
fastened before the ignition not illuminate and the
switch is turned to the ON beep sound will not be
The warning light will
position.
heard.
qLow Fuel Warning Light
Belt minder
NOTE
Low fuel
The belt minder can be deactivated. Consult an
Authorized Mazda Dealer to deactivate or
restore the seat belt minder.
warning light
Driver seated/Front passenger not
seated
This warning light in the fuel gauge
signals that the fuel tank will soon be
empty.
The belt minder is a supplemental
warning to the seat belt warning function.
If the driver's seat belt is not fastened
when the ignition switch is turned to the
ON position, the warning light/beep
operates to give you further reminders
according to the chart below.
Refuel as soon as possible.
qSeat Belt Warning Light/Beep
Vehicle speed
Between 0 ― 20
km/h
(0 ― 12 mph)
20 km/h
(12 mph) or
more
Condition
Seat belt
The seat belt warning light illuminates
and a beep sound will be heard if the
driver's seat belt is not fastened when the
ignition switch is turned to the ON
position.
Indicator
Beep
: Fastened
: Unfastened
: Illuminated
: Flashing
: Beep
5-42
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page151
Wednesday, July 8 2009 11:27 AM
Black plate (151,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
Once the beep sound is heard, it continues
NOTE
l
sounding even if the vehicle speed lowers
to 20 km/h (12 mph) or less until the
seatbelt is fastened or the beep sound
period has passed.
Driver seated/Front passenger seated
The seat belt warning function reminds
the front passenger to fasten the seat belt
according to the chart below.
To allow the front passenger seat weight
sensor to function properly, do not place
and sit on an additional seat cushion on the
front passenger seat. The sensor may not
function properly because the additional
seat cushion could cause sensor
interference.
l
When a small child sits on the front
passenger seat, it is possible that neither
the warning light nor the warning beep
operate.
Vehicle speed
Between 0 ― 20
km/h
(0 ― 12 mph)
20 km/h
(12 mph) or
more
Condition
Seat belt
(Driver)
qDoor-Ajar Warning Light
Seat belt
(Passenger)
Indicator
Beep
: Fastened
: Unfastened
: Illuminated
: Flashing
: Beep
This warning light illuminates when any
door or liftgate is not securely closed.
Close the door or liftgate securely before
driving the vehicle.
Placing heavy items on the front
passenger seat may cause the front
passenger seat belt warning function to
operate depending on the weight of the
item.
qLow Washer Fluid Level
Warning Lightí
Once the beep sound is heard, it continues
sounding even if the vehicle speed lowers
to 20 km/h (12 mph) or less until the
seatbelt is fastened or the beep sound
period has passed.
This warning light indicates that little
washer fluid remains. Add fluid (page
íSome models.
5-43
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page152
Wednesday, July 8 2009 11:27 AM
Black plate (152,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
q
Automatic Transaxle Warning Light
WARNING
If the tire pressure monitoring system
warning light illuminates or flashes, or
the tire pressure warning beep sound is
heard, decrease vehicle speed
immediately and avoid sudden
maneuvering and braking:
If the tire pressure monitoring system
warning light illuminates or flashes,
or the tire pressure warning beep
sound is heard, it is dangerous to
drive the vehicle at high speeds, or
perform sudden maneuvering or
braking. Vehicle drivability could
worsen and result in an accident.
To determine if you have a slow leak
or a flat, pull over to a safe position
where you can check the visual
condition of the tire and determine if
you have enough air to proceed to a
place where air may be added and
the system monitored again by an
Authorized Mazda Dealer or a tire
repair station.
This warning light stays on for a few
seconds when the ignition switch is turned
to the ON position.
The light illuminates when the transaxle
has a problem.
CAUTION
If the automatic transaxle warning
light illuminates, the transaxle has
an electrical problem. Continuing to
drive your Mazda in this condition
could cause damage to your
transaxle. Consult an Authorized
Mazda Dealer as soon as possible.
qTire Pressure Monitoring System
(TPMS) Warning Lightí
Do not ignore the TPMS Warning Light:
Ignoring the TPMS warning light is
dangerous, even if you know why it is
illuminated. Have the problem taken
care of as soon as possible before it
develops into a more serious
situation that could lead to tire
failure and a dangerous accident.
This warning light illuminates for a few
seconds when the ignition switch is turned
to the ON position.
Warning light illuminates/Warning
beep sounds
When the warning light illuminates, and
the warning beep sound is heard (about 3
seconds), tire pressure is too low in one or
more tires.
Thereafter, the warning light illuminates
and a beep is heard when tire pressure is
too low in one or more tires, and flashes
when there is a system malfunction.
5-44
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page153
Wednesday, July 8 2009 11:27 AM
Black plate (153,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
Adjust the tire pressure to the correct tire
pressure. Refer to the specification charts
(page 10-6).
NOTE
l
Perform tire pressure adjustment when the
tires are cold. Tire pressure will vary
according to the tire temperature, therefore
let the vehicle stand for 1 hour or only drive
it 1.6 km (1 mile) or less before adjusting
the tire pressures. When pressure is
adjusted on hot tires to the cold inflation
pressure, the TPMS warning light/beep may
turn on after the tires cool and pressure
drops below specification.
CAUTION
When replacing/repairing the tires or
wheels or both, have the work done
by an Authorized Mazda Dealer, or
the tire pressure sensors may be
damaged.
Also, an illuminated TPMS warning light,
resulting from the tire air pressure dropping
due to cold ambient temperature, may turn
off if the ambient temperature rises. In this
case, it will also be necessary to adjust the
tire air pressures. If the TPMS warning
light illuminates due to a drop in tire air
pressure, make sure to check and adjust the
tire air pressures.
l
After adjusting the tire air pressures, it may
require some time for the TPMS warning
light to turn off. If the TPMS warning light
remains illuminated, drive the vehicle at a
speed of at least 25 km/h (16 mph) for 10
minutes, and then verify that it turns off.
Tires lose air naturally over time and the
TPMS cannot tell if the tires are getting too
soft over time or you have a flat. However,
when you find one low tire in a set of four-
that is an indication of trouble; you should
have someone drive the vehicle slowly
forward so you can inspect any low tire for
cuts and any metal objects sticking through
tread or sidewall. Put a few drops of water
in the valve stem to see if it bubbles
l
indicating a bad valve. Leaks need to be
addressed by more than simply refilling the
trouble tire as leaks are dangerous - take it
to an Authorized Mazda Dealer which has
all the equipment to fix tires, TPMS systems
and order the best replacement tire for your
vehicle.
5-45
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page154
Wednesday, July 8 2009 11:27 AM
Black plate (154,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
If the warning light illuminates again even
after the tire pressures are adjusted, there
may be a tire puncture. Replace the
punctured tire with the temporary spare
tire (page 7-7).
qHeadlight High-Beam Indicator
Light
NOTE
A tire pressure sensor is not installed to the
temporary spare tire. The warning light will
flash continuously while the temporary spare
tire is being used.
This light indicates one of two things:
l
The high-beam headlights are on.
Warning light flashes
l
The turn signal lever is in the flash-to-
When the warning light flashes, there may
be a system malfunction. Consult an
Authorized Mazda Dealer.
pass position.
qShift Position Indicator Light
(Automatic Transaxle)
qSecurity Indicator Light
This indicates the selected shift position
when the ignition switch is in the ON
position.
This indicator light starts flashing every 2
seconds when the ignition switch is turned
from the ON to the ACC position and the
immobilizer system is armed.
The light stops flashing when the ignition
switch is turned to the ON position with
the correct ignition key.
At this time, the immobilizer system is
disarmed and the light illuminates for
about 3 seconds and then turns off.
If the engine does not start with the
correct ignition key, and the security
indicator light keeps illuminating or
flashing, the system may have a
malfunction. Consult an Authorized
Mazda Dealer.
D range/gear position indicator
5-46
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page155
Wednesday, July 8 2009 11:27 AM
Black plate (155,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
In manual mode, the “M” of the shift
qCruise Main Indicator Light
(Amber)/Cruise Set Indicator
Light (Green)í
position indicator illuminates and the
numeral for the selected gear displays in
the gear position indicator.
qTCS/DSC Indicator Lightí
The indicator light has two colors.
Cruise Main Indicator Light (Amber)
This indicator light stays on for a few
seconds when the ignition switch is turned
to the ON position. If the TCS or DSC is
operating, the indicator light flashes.
The indicator light illuminates amber
when the ON/OFF switch is pressed and
the cruise control system is activated.
Cruise Set Indicator Light (Green)
The indicator light illuminates green when
a cruising speed has been set.
If the light stays on, the TCS or DSC may
have a malfunction and they may not
operate correctly. Take your vehicle to an
Authorized Mazda Dealer.
qLights-On Indicator Light
qDSC OFF Indicator Lightí
This indicator light illuminates when the
exterior lights and dashboard illumination
are on.
This indicator light stays on for a few
seconds when the ignition switch is turned
to the ON position.
It also illuminates when the DSC OFF
switch is pressed and TCS/DSC is
switched off (page 5-24).
If the light stays on when the TCS/DSC is
not switched off, take your vehicle to an
Authorized Mazda Dealer. The dynamic
stability control may have a malfunction.
íSome models.
5-47
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page156
Wednesday, July 8 2009 11:27 AM
Black plate (156,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
qPower Steering Malfunction
qTurn-Signal/Hazard Warning
Indicator Light
Indicator Lights
This indicator light illuminates when the
ignition switch is turned to the ON
position, and turns off when the engine is
started.
When operating the turn signal lights, the
left or right turn signal indicator light
flashes to indicate which turn signal light
is operating (page 5-53).
If the light remains illuminated after the
engine is started, or illuminates while
driving, turn off the engine after parking
in a safe place, and then start the engine
again.
If the light does not illuminate after
restarting the engine, this indicates that
the power steering is restored and normal
steering is possible.
When operating the hazard warning
lights, both turn signal indicator lights
flash (page 5-60).
NOTE
If an indicator light remains illuminated (does
not flash) or if it flashes abnormally, one of the
turn signal bulbs may be burned out.
If the light remains illuminated, the power
steering is still inoperable. Consult an
Authorized Mazda Dealer.
NOTE
l
The power steering system is inoperable
when the power steering malfunction
indicator light illuminates. Steering is
possible, but requires more physical effort.
l
Repeatedly jerking the steering wheel left
and right while the vehicle is stopped or
moving extremely slowly will cause the
power steering system to go into protective
mode which will make the steering feel
heavy, but this does not indicate a
malfunction. If this occurs, park the vehicle
safely and wait a few minutes for the system
to return to normal.
5-48
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page157
Wednesday, July 8 2009 11:27 AM
Black plate (157,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
Beep Sounds
qSeat Belt Warning Beep
If the driver's seat belt is not fastened
when the ignition switch is turned to the
ON position, a beep sound will be heard
for about 6 seconds.
If the driver's seat belt is not fastened and
the vehicle is driven at a speed faster than
about 20 km/h (12 mph), a beep sound
will be heard again for a specified period
of time.
Refer to Seat Belt Warning Light/Beep on
page 5-42.
qIgnition Key Reminder
If the ignition switch is in the LOCK or
ACC position with the key inserted, a
continuous beep sound will be heard
when the driver's door is opened.
qLights-On Reminder
If lights are on and the key is removed
from the ignition switch, a continuous
beep sound will be heard when the
driver's door is opened.
qTire Inflation Pressure Warning
Beepí
The warning beep sound will be heard for
about 3 seconds when there is any
abnormality in tire inflation pressures
(page 5-26).
íSome models.
5-49
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page158
Wednesday, July 8 2009 11:27 AM
Black plate (158,1)
Driving Your Mazda
Switches and Controls
Type B (With AUTO position)
Lighting Control
qHeadlights
Type A (Without AUTO position)
Turn the headlight switch to turn the
headlights, other exterior lights and
dashboard illumination on or off.
Switch Position
Turn the headlight switch to turn the
headlights, other exterior lights and
dashboard illumination on or off.
Headlights
Off
Off
Off
On
On
On
Taillights
Parking lights
License lights
Side-marker
lights
Dashboard
illumination
Switch Position
Auto
Headlights
Off
Off
Off
On
On
On
Taillights
Parking lights
License lights
Side-marker lights
Dashboard illumination
NOTE
To prevent discharging the battery, do not
leave the lights on while the engine is off
unless safety requires them.
NOTE
To prevent discharging the battery, do not
leave the lights on while the engine is off
unless safety requires them.
AUTO (Auto-light control)
When the headlight switch is in the
AUTO position and the ignition switch is
in the ON position, the light sensor senses
the surrounding lightness or darkness and
automatically turns on or off the
headlights, other exterior lights and
dashboard illumination (see chart above).
5-50
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page159
Wednesday, July 8 2009 11:27 AM
Black plate (159,1)
Driving Your Mazda
Switches and Controls
NOTE
l
CAUTION
The headlights, other exterior lights and
dashboard illumination may not turn off
immediately even if the surrounding area
becomes well-lit because the light sensor
determines that it is nighttime if the
surrounding area is continuously dark for
several minutes such as inside long tunnels,
traffic jams inside tunnels, or in indoor
parking lots.
Ø Do not shade the light sensor by
adhering a sticker or a label on
the windshield. Otherwise the light
sensor will not operate correctly.
Light sensor
In this case, the light turns off if the light
switch is turned to the OFF position.
When the headlight switch is in the AUTO
position and the ignition switch is turned to
the ACC or LOCK position, the headlights,
other exterior lights and dashboard
illumination will turn off.
l
l
The timing for turning on the headlights,
other exterior lights and dashboard
illumination can be delayed by adjusting
the sensitivity of the light sensor. Consult an
Authorized Mazda Dealer regarding sensor
adjustment.
Ø The light sensor also works as a
rain sensor for the auto-wiper
control. Keep hands and scrapers
clear of the windshield when the
wiper lever is in the AUTO position
and the ignition switch is in the
ON position as fingers could be
pinched or the wipers and wiper
blades damaged when the wipers
activate automatically. If you are
going to clean the windshield, be
sure the wipers are turned off
completely - this is particularly
important when clearing ice and
snow - when it is particularly
tempting to leave the engine
running.
l
The sensitivity of the AUTO lights may be
changed by an Authorized Mazda Dealer.
Xenon fusion headlight bulbsí
The low-beam bulbs of the headlights
have xenon fusion bulbs that produce a
bright white beam over a wide area.
WARNING
Do not replace the xenon fusion bulbs
yourself:
Replacing the xenon fusion bulbs
yourself is dangerous. Because the
xenon fusion bulbs require high
voltage, you could receive an electric
shock if the bulbs are handled
incorrectly. Consult an Authorized
Mazda Dealer when the replacement
is necessary.
íSome models.
5-51
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page160
Wednesday, July 8 2009 11:27 AM
Black plate (160,1)
Driving Your Mazda
Switches and Controls
NOTE
qFlashing the Headlights
If the headlights flicker, or the brightness
weakens, the bulb-life may be depleted and a
replacement is necessary. Consult an
Authorized Mazda Dealer.
To flash the headlights, pull the lever fully
toward you. The headlight switch does
not need to be on, and the lever will return
to the normal position when released.
qLights-On Reminder
If lights are on and the key is removed
from the ignition switch, a continuous
beep sound will be heard when the
driver's door is opened.
OFF
Flashing
qHeadlight High-Low Beam
Push the lever forward for high beam.
Pull back to original position for low
beam.
qHeadlight Levelingí
The number of passengers and weight of
cargo in the luggage compartment change
the angle of the headlights.
The headlight leveling switch adjusts this
angle.
High beam
Low beam
5-52
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page161
Wednesday, July 8 2009 11:27 AM
Black plate (161,1)
Driving Your Mazda
Switches and Controls
Select the proper setting from the following chart.
Turn and Lane-Change
Signals
Front seat
Rear
seat
Switch
Load
Position
Driver Passenger
×
×
×
×
×
―
×
―
―
×
―
―
―
×
0
0
1
2
3
qTurn Signal
×
Move the signal lever down (for a left
turn) or up (for a right turn) to the stop
position. The signal will self-cancel after
the turn is completed.
×
×
―
―
×
×: Yes
―: No
If the indicator light continues to flash
after a turn, manually return the lever to
its original position.
q
Daytime Running Lights (Canada)
In Canada, vehicles must be driven with
the headlights on during daytime
operation.
Right turn
Right lane change
OFF
For that reason, the daytime running lights
automatically turn on when the ignition
switch is turned to the ON position.
NOTE
Left lane change
Left turn
The Daytime Running Lights turn off when the
parking brake is applied.
Green indicators on the dashboard show
which signal is working.
Lane-change signals
Move the lever slightly toward the
direction of the change ―until the
indicator flashes― and hold it there. It
will return to the off position when
released.
NOTE
If an indicator light stays on without flashing
or if it flashes abnormally, one of the turn
signal bulbs may be burned out.
5-53
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page162
Wednesday, July 8 2009 11:27 AM
Black plate (162,1)
Driving Your Mazda
Switches and Controls
Fog Lightsí
Windshield Wipers and
Washer
The fog lights help you to see as well as
to be seen.
The ignition switch must be in the ON
position.
The headlights must be turned on to turn
on the fog lights.
WARNING
Use only windshield washer fluid or
plain water in the reservoir:
To turn the fog lights on, rotate the fog
light switch to the
position.
Using radiator antifreeze as washer
fluid is dangerous. If sprayed on the
windshield, it will dirty the
windshield, affect your visibility, and
could result in an accident.
Only use windshield washer fluid
mixed with anti-freeze protection in
freezing weather conditions:
Using windshield washer fluid
without anti-freeze protection in
freezing weather conditions is
dangerous as it could freeze on the
windshield and block your vision
which could cause an accident.
In addition, make sure the
Fog light switch
To turn the fog lights off, rotate the fog
light switch to the OFF position or turn
the headlights off.
windshield is sufficiently warmed
using the defroster before spraying
the washer fluid.
NOTE
l
The fog lights will turn off when the
headlights are set at high beam.
l
(With auto-light control)
If the headlight switch is in the AUTO
position, the fog lights can be turned on
when the headlights, the exterior lights and
dashboard illumination are on.
5-54
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page163
Wednesday, July 8 2009 11:27 AM
Black plate (163,1)
Driving Your Mazda
Switches and Controls
NOTE
Variable-speed intermittent wipers
Because heavy ice and snow can jam the wiper
blades, the wiper motor is protected from
motor breakdown, overheating and possible
fire by a circuit breaker. This mechanism will
automatically stop operation of the blades, but
only for about 5 minutes.
Set the lever to INT and choose the
interval timing by rotating the ring.
If this happens, turn off the wiper switch and
park off the right-of-way, and remove the snow
and ice.
After 5 minutes, turn on the switch and the
blades should operate normally. If they do not
resume functioning, consult an Authorized
Mazda Dealer as soon as possible. Drive to
the side of the road and park off the right-of-
way. Wait until the weather clears before trying
to drive with the wipers inoperative.
INT ring
Type B (With AUTO position)
qWindshield Wipers
Type A (With INT position)
Turn the wipers on by pulling the lever
down.
AUTO ― Auto control
LO ― Low speed
HI ― High speed
Turn the wipers on by pulling the lever
down.
INT ― Intermittent
LO ― Low speed
HI ― High speed
For a single wiping cycle, press the lever
up to MIST.
MIST ― Mist
For a single wiping cycle, press the lever
up to MIST.
MIST ― Mist
5-55
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page164
Wednesday, July 8 2009 11:27 AM
Black plate (164,1)
Driving Your Mazda
Switches and Controls
AUTO (Auto-wiper control)
When the wiper lever is in the AUTO
position, the rain sensor senses the
amount of rainfall on the windshield and
turns the wiper on or off automatically
(off―intermittent―low speed―high
speed).
CAUTION
Ø Do not shade the rain sensor by
adhering a sticker or a label on
the windshield. Otherwise the rain
sensor will not operate correctly.
The sensitivity of the rain sensor can be
adjusted by turning the switch on the
wiper lever.
Rain sensor
From the center position (normal), turn
the switch towards (+) for higher
sensitivity (faster response) or turn the
_
switch towards ( ) for less sensitivity
(slower response).
Less sensitivity
Switch
Center
position
Higher sensitivity
5-56
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page165
Wednesday, July 8 2009 11:27 AM
Black plate (165,1)
Driving Your Mazda
Switches and Controls
Ø When the wiper lever is in the
AUTO position and the ignition
switch is in the ON position, the
wipers may move automatically in
the following cases:
NOTE
l
Switching the auto-wiper lever from the
OFF to the AUTO position while driving at
a vehicle speed of 4 km/h (2 mph) or higher
(or after driving the vehicle) activates the
windshield wipers once, after which they
operate according to the rainfall amount.
The auto-wiper control may not operate
when the rain sensor temperature is about
Ø
Ø
Ø
Ø
If the windshield above the rain
sensor is touched.
If the windshield above the rain
sensor is wiped with a cloth.
If the windshield is struck with
a hand or other object.
If the rain sensor is struck with
a hand or other object from
inside the vehicle.
l
l
_
10 °C (14 °F) or lower, or about 85 °C
(185 °F) or higher.
If the windshield is coated with water
repellent, the rain sensor may not be able to
sense the amount of rainfall correctly and
auto-wiper control may not operate
properly.
Keep hands and scrapers clear of
the windshield when the wiper
lever is in the AUTO position and
the ignition switch is in the ON
position as fingers could be
pinched or the wipers and wiper
blades damaged when the wipers
activate automatically.
If you are going to clean the
windshield, be sure the wipers are
turned off completely - this is
particularly important when
clearing ice and snow - when it is
particularly tempting to leave the
engine running.
l
If dirt or foreign matter (e.g. ice or matter
containing salt water) adheres to the
windshield above the rain sensor or if the
windshield is iced, it could cause the wipers
to move automatically. However, if the
wipers cannot remove this ice, dirt or
foreign matter, the auto-wiper control will
stop operation. In this case, pull the wiper
lever to the low speed or high speed
position for manual operation, or remove
the ice, dirt or foreign matter by hand to
restore the auto-wiper operation.
5-57
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page166
Wednesday, July 8 2009 11:27 AM
Black plate (166,1)
Driving Your Mazda
Switches and Controls
qWindshield Washer
Rear Window Wiper and
Washer
Pull the lever toward you and hold it to
spray washer fluid.
The ignition switch must be in the ON
position.
OFF
qRear Window Wiper
Washer
NOTE
With the wiper lever in the OFF or INT (Type
A)/AUTO (Type B) position, the wipers will
operate continuously until the lever is
released.
Turn the wiper on by turning the rear
wiper/washer switch.
ON ― Normal
If the washer does not work, inspect the
consult an Authorized Mazda Dealer.
INT ― Intermittent
qRear Window Washer
To spray washer fluid, turn the rear wiper/
washer switch to the
position. After
the switch is released, the washer will
stop.
If the washer does not work, inspect the
the washer still does not work, consult an
Authorized Mazda Dealer.
5-58
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page167
Wednesday, July 8 2009 11:27 AM
Black plate (167,1)
Driving Your Mazda
Switches and Controls
With fully automatic type air
conditioner
Rear Window Defroster
The rear window defroster clears frost,
fog, and thin ice from the rear window.
Indicator light
The ignition switch must be in the ON
position.
Press the switch to turn on the rear
window defroster. The rear window
defroster operates for about 15 minutes
and turns off automatically.
The indicator light illuminates during
operation.
CAUTION
To turn off the rear window defroster
before the 15 minutes has elapsed, press
the switch again.
Do not use sharp instruments or
window cleaners with abrasives to
clean the inside of the rear window
surface. They may damage the
defroster grid inside the window.
With manual type air conditioner
Indicator light
NOTE
This defroster is not designed for melting snow.
If there is an accumulation of snow on the rear
window, remove it before using the defroster.
qMirror Defrosterí
To turn on the mirror defrosters, turn the
ignition switch to the ON position and
press the rear window defroster switch
(page 5-59).
íSome models.
5-59
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page168
Wednesday, July 8 2009 11:27 AM
Black plate (168,1)
Driving Your Mazda
Switches and Controls
Horn
Hazard Warning Flasher
To sound the horn, press the
the steering wheel.
mark on
The hazard warning lights should always
be used when you stop on or near a
roadway in an emergency.
The hazard warning lights warn other
drivers that your vehicle is a traffic hazard
and that they must take extreme caution
when near it.
Depress the hazard warning flasher and all
the turn signals will flash.
NOTE
l
The turn signals do not work when the
hazard warning lights are on.
l
Check local regulations about the use of
hazard warning lights while the vehicle is
being towed to verify that it is not in
violation of the law.
5-60
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page170
Wednesday, July 8 2009 11:27 AM
Black plate (170,1)
Interior Comfort
Climate Control System
qNot Using for a Long Period
Operating Tips
Run the air conditioner about 10 minutes
at least once a month to keep internal
parts lubricated.
qOperating the Climate Control
System
Operate the climate control system with
the engine running.
qCheck the Refrigerant before the
Weather Gets Hot
NOTE
Have the air conditioner checked before
the weather gets hot. Lack of refrigerant
may make the air conditioner less
efficient. Consult an Authorized Mazda
Dealer for refrigerant inspection.
To prevent the battery from being discharged,
do not leave the fan control dial on for a long
period of time with the ignition switch in the
ON position when the engine is not running.
qClearing the Air Inlet
The air conditioner is filled with
HFC134a (R134a), a refrigerant that will
not damage the ozone layer.
If the air conditioner is low on refrigerant
or has a malfunction, consult an
Authorized Mazda Dealer.
Clear all obstructions such as leaves,
snow and ice from the hood and the air
inlet in the cowl grille to improve the
system efficiency.
qFoggy Windows
q
Replacement of the Cabin Air Filter
The windows may fog up easily in humid
weather. Use the climate control system to
defog the windows.
If your vehicle is equipped with an air
filter for the air conditioner, it is necessary
to change the filter periodically as
indicated in scheduled maintenance (page
8-3). Consult an Authorized Mazda
Dealer for replacement of the cabin air
filter.
To help defog the windows, operate the
air conditioner to dehumidify the air.
NOTE
The air conditioner may be used along with the
heater to dehumidify the air.
qParking in Direct Sunlight
If the vehicle has been parked in direct
sunlight during hot weather, open the
windows to let warm air escape, then run
the climate control system.
6-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page171
Wednesday, July 8 2009 11:27 AM
Black plate (171,1)
Interior Comfort
Climate Control System
Vent Operation
Knob
Close
Open
qAdjusting the Vents
Directing airflow
You can direct air flow by moving the adjustment knob.
Horizontal air flow can be adjusted by pressing the vent left or right.
Opening/closing vents
These vents can be opened and closed with wheel.
NOTE
When using the air conditioner, mist may come out from the vents. This is not a sign of trouble but a
result of humid air being suddenly cooled.
6-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page172
Wednesday, July 8 2009 11:28 AM
Black plate (172,1)
Interior Comfort
Climate Control System
qSelecting the Airflow Mode
Dashboard Vents
Defroster and Floor Vents
Dashboard and Floor Vents
Defroster Vents
Floor Vents
6-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page173
Wednesday, July 8 2009 11:28 AM
Black plate (173,1)
Interior Comfort
Climate Control System
Types of the Climate Control System
Manual type and fully automatic type climate control systems are explained separately.
Check your vehicle's climate control type and read the appropriate pages.
6-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page174
Wednesday, July 8 2009 11:28 AM
Black plate (174,1)
Interior Comfort
Climate Control System
Manual Typeí
Temperature control dial
Fan control dial
Mode selector dial
A/C switch
Rear window defroster switch
Air intake selector
Some models.
NOTE
(U.S.A., Canada)
When the mode is set to
qControl Switches
Temperature control dial
or
with the fan
control dial in a position other than 0 and the
temperature control dial in the maximum cold
position, the air intake selector switches to the
recirculated air mode and the A/C turns on
automatically.
If A/C is not desired, press the A/C switch to
turn it off.
Cold
Hot
Fan control dial
This dial controls temperature. Turn it
clockwise for hot and counterclockwise
for cold.
6-6
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page175
Wednesday, July 8 2009 11:28 AM
Black plate (175,1)
Interior Comfort
Climate Control System
This dial allows variable fan speeds.
0―Fan off
Press the switch once again to turn the air
conditioner off.
1―Low speed
NOTE
2―Medium low speed
3―Medium high speed
4―High speed
The air conditioner may not function when the
outside temperature approaches 0 °C (32 °F).
Air intake selector
Mode selector dial
This switch controls the source of air
entering the vehicle.
Turn the mode selector dial to select
airflow mode (page 6-4).
NOTE
Press the
switch to alternate
l
The mode selector dial can be set at the
between the outside air and recirculated
air modes.
intermediate positions ( ) between each
mode. Set the dial to an intermediate
position if you want to slightly adjust the
airflow amount.
It is recommended that under normal
conditions the switch be kept in the
outside air mode.
l
For example, when the mode selector dial is
at the
position between the
and
Outside air mode (indicator light
turned off)
positions, airflow from the floor vent is less
than that of the
position.
Outside air is taken into the vehicle. Use
this mode for normal ventilation and
heating.
í
A/C switch
Recirculated air mode (indicator light
illuminated)
Outside air is shut off. Air within the
vehicle is recirculated.
This mode can be used when driving on a
dusty road or in similar conditions. It also
helps to provide quicker cooling of the
interior.
Press the A/C switch to turn the air
conditioner on. The indicator light on the
switch will illuminate when the fan
control dial is set at position 1, 2, 3, or 4.
íSome models.
6-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page176
Wednesday, July 8 2009 11:28 AM
Black plate (176,1)
Interior Comfort
Climate Control System
qCooling (With Air Conditioner)í
WARNING
Do not use the recirculated air mode in
cold or rainy weather:
1. Set the mode selector dial to the
position.
Using the recirculated air mode in
cold or rainy weather is dangerous as
it will cause the windows to fog up.
Your vision will be hampered, which
could lead to a serious accident.
2. Set the temperature control dial to the
cold position.
3. Set the fan control dial to the desired
speed.
4. Turn on the air conditioner by pressing
the A/C switch.
qHeating
1. Set the mode selector dial to the
position.
5. Adjust the fan control dial and
temperature control dial to maintain
maximum comfort.
2. Set the temperature control dial to the
hot position.
CAUTION
When using the air conditioner while
driving up long hills or in heavy
traffic, closely monitor the
The air conditioner may cause engine
overheating. If the gauge indicates
overheating, turn the air conditioner
off (page 7-13).
3. Set the fan control dial to the desired
speed.
NOTE
l
If the windshield fogs up easily, set the
mode selector dial to the
position.
If cooler air is desired at face level, set the
mode selector dial at the position and
adjust the temperature control dial to
maintain maximum comfort.
The air to the floor is warmer than air to
the face (except when the temperature
control dial is set at the extreme hot or cold
position).
l
l
l
NOTE
l
When maximum cooling is desired, set the
temperature control dial to the extreme cold
position and set the air intake selector to
the recirculated air mode, then set the fan
control dial to position 4.
In the
,
, or
position, the air
conditioner is automatically turned on
(however, the indicator light does not
illuminate) and the outside air mode is
automatically selected to defrost the
windshield.
l
If warmer air is desired at floor level, set
the mode selector dial at the
position
and adjust the temperature control dial to
maintain maximum comfort.
l
The air to the floor is warmer than air to
the face (except when the temperature
control dial is set at the extreme hot or cold
position).
In the
or
position, the outside air
mode cannot be changed to the recirculated
air mode.
6-8
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page177
Wednesday, July 8 2009 11:28 AM
Black plate (177,1)
Interior Comfort
Climate Control System
NOTE
l
qVentilation
For maximum defrosting, set the
temperature control dial to the extreme hot
position and the fan control dial to position
4.
1. Set the mode selector dial to the
position.
2. Set the air intake selector to the outside
air mode.
l
l
If warm air is desired at the floor, set the
mode selector dial to the
position.
3. Set the temperature control dial to the
desired position.
In the , or position, the air
,
conditioner is automatically turned on
(however, the indicator light does not
illuminate) and the outside air mode is
automatically selected to defrost the
windshield.
4. Set the fan control dial to the desired
speed.
q
Windshield Defrosting and Defogging
In the
or
position, the outside air
1. Set the mode selector dial to the
position.
mode cannot be changed to the recirculated
air mode.
2. Set the temperature control dial to the
desired position.
qDehumidifying (With Air
Conditioner)í
3. Set the fan control dial to the desired
speed.
Operate the air conditioner in cool or cold
weather to help defog the windshield and
side windows.
WARNING
Do not defog the windshield using the
position with the temperature
1. Set the mode selector dial to the
desired position.
control set to the cold position:
2. Set the air intake selector to the outside
air mode.
Using the
position with the
temperature control set to the cold
position is dangerous as it will cause
the outside of the windshield to fog
up. Your vision will be hampered,
which could lead to a serious
3. Set the temperature control dial to the
desired position.
4. Set the fan control dial to the desired
speed.
accident. Set the temperature control
to the hot or warm position when
5. Turn on the air conditioner by pressing
the A/C switch.
using the
position.
NOTE
One of the functions of the air conditioner is
dehumidifying the air and, to use this function,
the temperature does not have to be set to cold.
Therefore, set the temperature control dial to
the desired position (hot or cold) and turn on
the air conditioner when you want to
dehumidify the cabin air.
íSome models.
6-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page178
Wednesday, July 8 2009 11:28 AM
Black plate (178,1)
Interior Comfort
Climate Control System
Fully Automatic Typeí
Climate control information is displayed on the information display.
Without rear ventilation system
Temperature control dial
Windshield defroster switch
Mode selector switch
Fan control dial
OFF switch
Auto switch
Ambient Temperature switch
Air intake selector
A/C switch
Rear window defroster switch
With rear ventilation system
Auto switch
Temperature control dial Mode selector switch
Windshield defroster switch
Fan control dial
A/C switch
OFF switch
Ambient Temperature switch
Rear ventilation control switch
Air intake selector
Rear window defroster switch
6-10
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page179
Wednesday, July 8 2009 11:28 AM
Black plate (179,1)
Interior Comfort
Climate Control System
NOTE
AUTO switch indicator light
qControl Switches
AUTO switch
l
When on, it indicates AUTO operation, and
Without rear ventilation system
the system will function automatically.
If any of the following dials or switches are
l
operated while in AUTO control, the AUTO
switch indicator turns off.
l
Mode selector switch
Fan control dial
A/C switch
Windshield defroster switch
l
l
l
The functions for dials and switches other
than those operated in the above continue
to operate in AUTO control.
With rear ventilation system
OFF switch
Without rear ventilation system
With rear ventilation system
By pressing the AUTO switch the
following functions will be automatically
controlled in accordance with the selected
set temperature:
l
Airflow temperature
Amount of airflow
Selection of airflow mode
Outside/Recirculated air selection
l
l
l
l
Air conditioner operation
Pressing the OFF switch shuts off the
climate control system.
6-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page180
Wednesday, July 8 2009 11:28 AM
Black plate (180,1)
Interior Comfort
Climate Control System
Temperature control dial
With rear ventilation system
Without rear ventilation system
Cold
Hot
Slow
Fast
With rear ventilation system
The fan has seven speeds. The selected
speed will be displayed.
Mode selector switch
Cold
Hot
This dial controls temperature.Turn it
clockwise for hot and counterclockwise
for cold.
The desired airflow mode can be selected
(page 6-4).
Fan control dial
NOTE
l
With the airflow mode set to
position
Without rear ventilation system
and the temperature control dial set at a
medium temperature, heated air is directed
to the feet and a comparably lower air
temperature will flow through the central,
left and right vents.
l
To set the air vent to
windshield defroster switch.
, press the
Slow
Fast
6-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page181
Wednesday, July 8 2009 11:28 AM
Black plate (181,1)
Interior Comfort
Climate Control System
A/C switch
Air intake selector
Without rear ventilation system
Outside or recirculated air positions can
be selected. Press the switch to select
outside/recirculated air positions.
With rear ventilation system
Recirculated air position (indicator
light illuminated)
Use this position when going through
tunnels, driving in congested traffic (high
engine exhaust areas) or when quick
cooling is desired.
Outside air position (indicator light
turned off)
Use this position for normal conditions
and defogging.
Pressing the A/C switch while the AUTO
switch is turned on will turn off the air
conditioning (cooling/dehumidifying
functions). The air conditioning can be
turned on and off by pressing the A/C
switch while the fan control dial is on.
WARNING
Do not use the
rainy weather:
Using the
position in cold or
position in cold or
rainy weather is dangerous as it will
cause the windows to fog up. Your
vision will be hampered, which could
lead to a serious accident.
NOTE
The air conditioner may not function when the
outside temperature approaches 0 °C (32 °F).
(Indicator remains on even when system is off.)
AMB (Ambient Temperature) switch
6-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page182
Wednesday, July 8 2009 11:28 AM
Black plate (182,1)
Interior Comfort
Climate Control System
Press the AMB switch to display the
ambient temperature.
With rear ventilation system
NOTE
l
The displayed ambient temperature may
vary from the actual ambient temperature
depending on the surrounding area and
vehicle conditions.
l
Press the AMB switch 2 seconds or more to
switch the display from Fahrenheit to
Centigrade or vice versa.
l
Press the AMB switch again to switch the
display from ambient temperature to the
temperature set for the air conditioner.
2. Use the temperature control dial to
select a desired temperature.
Windshield defroster switch
Without rear ventilation system
Cold
Hot
Press the switch to defrost the windshield
and front door windows.
With rear ventilation system
qOperation of Automatic Air
Conditioning
1. Press the AUTO switch. Selection of
the airflow mode, air intake selector
and amount of airflow will be
automatically controlled.
Cold
Hot
Without rear ventilation system
To turn off the system, press the OFF
switch.
6-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page183
Wednesday, July 8 2009 11:28 AM
Black plate (183,1)
Interior Comfort
Climate Control System
NOTE
NOTE
l
Setting the temperature to maximum high
or low will not provide the desired
temperature at a faster rate.
Use the temperature control dial to increase
the air flow temperature and defog the
windshield more quickly.
l
When selecting heat, the system will restrict
airflow until it has warmed to prevent cold
air from blowing out of the vents.
qSunlight/Temperature Sensor
The fully automatic air conditioner
function measures inside and outside
temperatures, and sunlight. It then sets
temperatures inside the passenger
compartment accordingly.
q
Windshield Defrosting and Defogging
CAUTION
Do not obstruct either sensor,
otherwise the automatic air
conditioner will not operate properly.
Sunlight sensor
Press the windshield defroster switch.
In this position, the outside air position is
automatically selected, and the air
conditioner automatically turns on. The
air conditioner will directly dehumidify
the air to the front windshield and side
be increased.
WARNING
Set the temperature control to the hot
or warm position when defogging (
position):
Using the
position with the
temperature control set to the cold
position is dangerous as it will cause
the outside of the windshield to fog
up. Your vision will be hampered,
which could lead to a serious
accident.
Interior temperature sensor
6-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page184
Wednesday, July 8 2009 11:28 AM
Black plate (184,1)
Interior Comfort
Climate Control System
Rear vent buttons
Rear Ventilation Systemí
The rear ventilation system only blows
cool air through the rear vents while the
front climate control system is on. It does
not blow air when the front climate
control is off. The rear vents blow either
outside air or recirculated air, depending
on the position in which the air intake
selector switch is set.
The rear vent switches adjust the airflow
volume flowing from the rear vent.
OFF: Fan off
Front climate control is given priority
over the rear ventilation control.
LO: Low speed
HI: High speed
Knob
NOTE
Only cool or cold air (no heat) blows through
the rear vents while the front climate control is
on. Heat for the rear passengers comes from
under the front seats when the front heater is
on and set to floor mode.
When pressing the rear ventilation control
switch on the front control panel (with climate
control system on), the rear ventilation system
operates at low speed only. To change to high
speed, press the HI rear vent button.
qControl Switches
Rear ventilation control switch
To get air flowing through the rear vents,
first operate the fan control dial or turn on
the AUTO switch on the front climate
control operation panel. Then, switch on
the rear ventilation control switch on the
front climate control panel, or switch on
either the low or high rear vent button on
the rear console.
6-16
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page185
Wednesday, July 8 2009 11:28 AM
Black plate (185,1)
Interior Comfort
Audio System
Antenna
Operating Tips for Audio
System
qDetachable Type
To remove the antenna, turn it
counterclockwise.
To install the antenna, turn it clockwise.
Make sure the antenna is securely
installed.
WARNING
Do not adjust the audio control
switches while driving the vehicle:
Adjusting the audio while driving the
vehicle is dangerous as it could
distract your attention from the
vehicle operation which could lead to
a serious accident. Always adjust the
audio while the vehicle is stopped.
Even if the audio control switches are
equipped on the steering wheel, learn
to use the switches without looking
down at them so that you can keep
your maximum attention on the road
while driving the vehicle.
Install
Remove
CAUTION
CAUTION
For the purposes of safe driving,
adjust the audio volume to a level
that allows you to hear sounds
outside of the vehicle including car
horns and particularly emergency
vehicle sirens.
Ø To prevent damage to the
antenna, remove it before entering
a car wash facility or passing
beneath a low overhead clearance.
Ø Be careful around the antenna
when removing snow from the
roof. Otherwise the antenna could
be damaged.
NOTE
l
To prevent the battery from being
discharged, do not leave the audio system
on for a long period of time when the
engine is not running.
NOTE
When leaving your vehicle unattended, we
recommend that you remove the antenna and
store it inside the vehicle.
l
If a cellular phone or CB radio is used in
or near the vehicle, it could cause noise to
occur from the audio system, however, this
does not indicate that the system has been
damaged.
6-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page186
Wednesday, July 8 2009 11:28 AM
Black plate (186,1)
Interior Comfort
Audio System
Signals from an FM transmitter are similar
to beams of light because they do not
bend around corners, but they do reflect.
Unlike AM signals, FM signals cannot
travel beyond the horizon. Therefore, FM
stations cannot be received at the great
distances possible with AM reception.
qRadio Reception
AM characteristics
AM signals bend around such things as
buildings or mountains and bounce off the
ionosphere. Therefore, they can reach
longer distances than FM signals. Because
of this, two stations may sometimes be
picked up on the same frequency at the
same time.
Ionosphere
FM wave
AM wave
Ionosphere
FM wave
100—200 km (60—120 miles)
Atmospheric conditions can also affect
FM reception. High humidity will cause
poor reception. However, cloudy days
may provide better reception than clear
days.
Station 1
Station 2
FM characteristics
An FM broadcast range is usually about
40―50 km (25―30 miles) from the
source. Because of extra coding needed to
break the sound into two channels, stereo
FM has even less range than monaural
(non-stereo) FM.
Multipath noise
Since FM signals can be reflected by
obstructions, it is possible to receive both
the direct signal and the reflected signal at
the same time. This causes a slight delay
in reception and may be heard as a broken
sound or a distortion. This problem may
also be encountered when in close
FM Station
proximity to the transmitter.
40—50km
(25—30 miles)
Reflected wave
Direct
6-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page187
Wednesday, July 8 2009 11:28 AM
Black plate (187,1)
Interior Comfort
Audio System
Flutter/Skip noise
Strong signal noise
Signals from an FM transmitter move in
straight lines and become weak in valleys
between tall buildings, mountains, and
other obstacles. When a vehicle passes
through such an area, the reception
conditions may change suddenly, resulting
in annoying noise.
This occurs very close to a transmitter
tower. The broadcast signals are
extremely strong, so the result is noise and
sound breakup at the radio receiver.
Station drift noise
When a vehicle reaches the area of two
strong stations broadcasting at similar
frequencies, the original station may be
temporarily lost and the second station
picked up. At this time there will be some
noise from this disturbance.
Weak signal noise
In suburban areas, broadcast signals
become weak because of distance from
the transmitter. Reception in such fringe
areas is characterized by sound breakup.
Station 2
Station 1
88.1 MHz
88.3 MHz
6-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page188
Wednesday, July 8 2009 11:28 AM
Black plate (188,1)
Interior Comfort
Audio System
l
The CD revolves at high speed within
the unit. Defective (cracked or badly
bent) CDs should never be used.
qOperating Tips for CD Player/In-
Dash CD Changer
Condensation phenomenon
Immediately after turning on the heater
when the vehicle is cold, the CD or
optical components (prism and lens) in the
CD player/In-dash CD changer may
become clouded with condensation. At
this time, the CD will eject immediately
when placed in the unit. A clouded CD
can be corrected simply by wiping it with
a soft cloth. Clouded optical components
will clear naturally in about an hour. Wait
for normal operation to return before
attempting to use the unit.
l
Do not use non-conventional discs
such as heart-shaped, octagonal discs,
etc. The disc may not eject resulting in
a malfunction.
Handling the CD player/In-dash CD
changer
The following precautions should be
observed.
l
Do not spill any liquid on the audio
system.
l
If the memory portion of the CD is
transparent or translucent, do not use
the disc.
l
Do not insert any objects, other than
CDs, into the slot.
Transparent
6-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page189
Wednesday, July 8 2009 11:28 AM
Black plate (189,1)
Interior Comfort
Audio System
l
A new CD may have rough edges on
CD Player
its inner and outer perimeters. If a disc
with rough edges is used, proper
setting will not be possible and the CD
player/In-dash CD changer will not
play the CD. In addition, the disc may
not eject resulting in a malfunction.
Remove the rough edges in advance by
using a ball-point pen or pencil as
shown below. To remove the rough
edges, rub the side of the pen or pencil
against the inner and outer perimeter of
the CD.
In-dash CD changer
l
Use discs that have been legitimately
produced. If illegally-copied discs such
as pirated discs are used, the system
may not operate properly.
Be sure never to touch the signal
surface when handling the CDs. Pick
up a CD by grasping the outer edge or
the edge of the hole and the outer edge.
l
When driving over uneven surfaces,
the sound may jump.
l
l
The CD player/In-dash CD changer has
been designed to play CDs bearing the
identification logo as shown below. No
other discs can be played.
l
Do not stick paper or tape on the CD.
Avoid scratching the reverse side (the
side without a label). The disc may not
eject resulting in a malfunction.
6-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page190
Wednesday, July 8 2009 11:28 AM
Black plate (190,1)
Interior Comfort
Audio System
l
l
Dust, finger smudges, and dirt can
This unit may not be able to play
certain discs made using a computer
due to the application (writing
software) setting used. (For details,
consult the store where the application
was purchased.)
It is possible that certain text data, such
as titles, recorded on a CD-R/CD-RW
may not be displayed when musical
data (CD-DA) is playing.
The period from when a CD-RW is
inserted to when it begins playing is
longer than a normal CD or CD-R.
Completely read the instruction manual
and cautions for CD-R/CD-RWs.
Do not use discs with cellophane tape
adhering, partially peeled off labels, or
adhesive material exuding from the
edges of the CD label. Also, do not use
discs with a commercially-available
CD-R label affixed. The disc may not
eject resulting in a malfunction.
decrease the amount of light reflected
from the signal surface, thus affecting
sound quality. If the CD should
become soiled, gently wipe it with a
soft cloth from the center of the CD to
the edge.
l
l
l
Do not use record sprays, antistatic
agents, or household spray cleaners.
Volatile chemicals such as benzine and
thinner can also damage the surface of
the CD and must not be used. Anything
that can damage, warp, or fog plastic
should never be used to clean CDs.
Insert discs one by one. If two discs are
inserted at the same time, the system
may not operate properly.
l
l
l
l
The CD player/In-dash CD changer
ejects the CD if the CD is inserted
upside down. Also dirty and/or
defective CDs may be ejected.
l
Do not insert cleaning discs in the CD
player/In-dash CD changer.
Do not insert any disc with a peel-off
l
seal affixed to it.
Handling the In-dash CD changer
l
This unit may not be able to play
certain CD-R/CD-RWs made using a
computer or music CD recorder due to
disc characteristics, scratches,
smudges, dirt, etc., or due to dust or
condensation on the lens inside the
unit.
l
Storing CDs in the vehicle exposed to
direct sunlight or high temperature may
damage the CD-R/CD-RWs, and make
them unplayable.
l
CD-R/CD-RW exceeding 700 MB
cannot be played.
6-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page191
Wednesday, July 8 2009 11:28 AM
Black plate (191,1)
Interior Comfort
Audio System
Audio Set
Audio information is displayed on the information display.
CD Player (non-MP3 compatible)
In-Dash CD Changer (non-MP3 compatible)
Illustration is of a representative audio unit.
Power/Volume/Sound Controls .............................................................................. page 6-24
6-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page192
Wednesday, July 8 2009 11:28 AM
Black plate (192,1)
Interior Comfort
Audio System
qPower/Volume/Sound Controls
Power/Volume dial
Audio control dial
Power ON/OFF
Audio sound adjustment
Turn the ignition switch to the ACC or
ON position.
1. Press the audio control dial to select the
function. The selected function will be
indicated.
Press the power/volume dial to turn the
audio system on.
Press the power/volume dial again to turn
the audio system off.
*
NOTE
To prevent the battery from being discharged,
do not leave the audio system on for a long
period of time when the engine is not running.
*
Volume adjustment
*
Depending on the mode selected, the
indication changes.
To adjust the volume, turn the power/
volume dial.
Turn the power/volume dial to the right to
increase volume, to the left to decrease it.
6-24
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page193
Wednesday, July 8 2009 11:28 AM
Black plate (193,1)
Interior Comfort
Audio System
2. Turn the audio control dial to adjust the
selected functions as follows:
Turn the audio control dial to select ALC
OFF or ALC LEVEL1―3 modes. The
selected mode will be indicated.
Indication
Turn Left Turn Right
Select mode
Decrease
bass
Increase
bass
Decrease
treble
Increase
treble
Shift the
Shift the
sound to the sound to the
front
rear
Shift the
Shift the
sound to the sound to the
left
right
OFF
ON
In-Dash CD Changer type
Select the desired ALC mode.
NOTE
Mode
Volume change
About 5 seconds after selecting any mode, the
volume function will be automatically selected.
To reset bass, treble, fade, and balance, press
the audio control dial for 2 seconds. The unit
will beep and “CLEAR” will be displayed.
No change
Minimum
Automatic Level Control (ALC)
The automatic level control (ALC) is a
feature that automatically adjusts audio
volume and sound quality according to
the vehicle speed.
Medium
The volume increases in accordance with
the increase in vehicle speed, and
decreases as vehicle speed decreases.
Maximum
CD Player type
Select the desired ALC mode.
Mode
Volume change
No change
Minimum
Medium
Maximum
6-25
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page194
Wednesday, July 8 2009 11:28 AM
Black plate (194,1)
Interior Comfort
Audio System
Turn the audio control dial to select ALC
OFF or ALC LEVEL1―7 modes. The
selected mode will be indicated.
BEEP setting
The beep-sound when operating the audio
system can be set on or off.
6-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page195
Wednesday, July 8 2009 11:28 AM
Black plate (195,1)
MEMO
6-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page196
Wednesday, July 8 2009 11:28 AM
Black plate (196,1)
Interior Comfort
Audio System
qOperating the Radio
Band selector button
Electronic serial number button
Satellite button
Channel
preset
buttons
Auto
memory/Instant
replay button
Scan button
Seek tuning/Category buttons
Manual tuning dial
Radio ON
Tuning
Press a band selector button (
turn the radio on.
) to
The radio has the following tuning
methods: Manual, Seek, Scan, Preset
channel, and Auto memory tuning. The
easiest way to tune stations is to set them
on preset channels.
Band selection
Successively pressing the band selector
button ( ) switches the bands as
follows: FM1→FM2→AM.
NOTE
If the power supply is interrupted (fuse blows
or the battery is disconnected), the preset
channels will be erased.
The selected mode will be indicated. If
FM stereo is being received, “ST” will be
displayed.
Manual tuning
NOTE
Turning the manual tuning dial will
change the frequency higher or lower.
If the FM broadcast signal becomes weak,
reception automatically changes from
STEREO to MONO for reduced noise, and the
“ST” indicator will go out.
Seek tuning
Pressing the seek tuning/category button
(
,
) will cause the tuner to seek a
higher or lower frequency automatically.
6-28
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page197
Wednesday, July 8 2009 11:28 AM
Black plate (197,1)
Interior Comfort
Audio System
NOTE
Press and hold the auto memory/instant
If you continue to press and hold the button,
the frequency will continue changing without
stopping.
replay button (
) for about 2
seconds until a beep sound is heard; the
system will automatically scan and
temporarily store up to 6 stations with the
strongest frequencies in each selected
band in that area.
Scan tuning
Press the scan button (
) to
automatically sample strong stations.
Scanning stops at each station for about 5
seconds. To hold a station, press the scan
After scanning is completed, the station
with the strongest frequency will be tuned
and its frequency displayed.
button (
) again during this interval.
Press and release the auto memory/instant
Preset channel tuning
replay button (
) to recall stations
from the auto-stored stations. One stored
station will be selected each time; its
frequency and channel number will be
displayed.
The 6 preset channels can be used to store
6 AM and 12 FM stations.
1. To set a channel first select AM, FM1,
or FM2. Tune to the desired station.
NOTE
2. Depress a channel preset button for
about 2 seconds until a beep sound is
heard. The preset channel number and
station frequency will be displayed.
The station is now held in the memory.
If no stations can be tuned after scanning
operations, “A” will be displayed.
SATELLITE RADIO (SAT)
Vehicles equipped with the separately
purchased SIRIUS digital satellite radio
unit have the ability to receive channels of
digital quality programming coast to coast
via satellite. For information on use, read
the Satellite Radio Kit manual
accompanying the SIRIUS digital satellite
radio unit. A subscription to SIRIUS
digital satellite radio service is required
(available in the U.S. - Except Alaska and
Hawaii) to enable this feature once the
separately purchased SIRIUS digital
satellite radio unit has been installed. For
subscription and channel information, or
for digital satellite radio technical issues,
contact SIRIUS directly at:
3. Repeat this operation for the other
stations and bands you want to store.
To tune one in the memory, select AM,
FM1, or FM2 and then press its
channel preset button. The station
frequency and the channel number will
be displayed.
NOTE
If the power supply is interrupted (fuse blows
or the battery is disconnected), the preset
channels will be erased.
Auto memory tuning
This is especially useful when driving in
an area where the local stations are not
known. Additional AM/FM stations can
be stored without disturbing the
- Web: www.siriusradio.com
- Phone (24 hrs/day, 7 days/week): 888-
539-SIRI (7474)
previously set channels.
- E-mail: customercare@sirius-radio.com
6-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page198
Wednesday, July 8 2009 11:28 AM
Black plate (198,1)
Interior Comfort
Audio System
- Mailing Address: Sirius Satellite Radio
1221 Avenue Of The Americas
New York, NY 10020
Attention: Customer Care
Include your Sirius Radio ESN
(Electronic Serial Number) when
subscribing or requesting technical
assistance. See the Satellite Radio Kit
manual accompanying the SIRIUS unit
for complete satellite radio activation
procedures and information on how to
display the ESN#.
6-30
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page199
Wednesday, July 8 2009 11:28 AM
Black plate (199,1)
MEMO
6-31
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page200
Wednesday, July 8 2009 11:28 AM
Black plate (200,1)
Interior Comfort
Audio System
qOperating the Compact Disc (CD) Player
Load button CD slot
CD play button
CD eject button
Repeat button
Fast-forward/Track up
button
Reverse/Track down
button
Scan button
Random button
Type
Playable data
· Music data (CD-DA)
Playback
Music CD player
(non-MP3 compatible)
Press the CD play button ( ) to start
play when a CD is in the unit.
If a CD is not in the unit when the CD
play button ( ) is pressed, “NO DISC”
will flash on and off.
Inserting the CD
Insert the CD into the slot, label-side up.
The auto-loading mechanism will set the
CD and begin play.
NOTE
When the load button (
CD will load and play even if the CD eject
button ( ) had been previously pressed.
) is pressed, the
NOTE
There will be a short lapse before play begins
while the player reads the digital signals on
the CD.
Fast-forward/Reverse
Press and hold the fast-forward button
Ejecting the CD
(
) to advance through a track at high
Press the CD eject button ( ) to eject the
CD.
speed.
Press and hold the reverse button ( ) to
reverse through a track at high speed.
6-32
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page201
Wednesday, July 8 2009 11:28 AM
Black plate (201,1)
Interior Comfort
Audio System
Track search
Message display
Press the track up button ( ) once to skip
forward to the beginning of the next track.
Press the track down button ( ) once to
skip back to the beginning of the current
track.
If “CHECK CD” is displayed, it means
that there is some CD malfunction. Check
the CD for damage, dirt, or smudges, and
then properly reinsert. If the message
appears again, take the unit to an
Authorized Mazda Dealer for service.
Music scan
This function scans the titles on a CD and
plays 10 seconds of each song to aid you
in finding a song you want to listen to.
Press the scan button (
) during
playback to start the scan play operation
(the track number will flash).
Press the scan button (
cancel scan playback.
) again to
NOTE
If the unit is left in scan, normal playback will
resume where scan was selected.
Repeat playback
This feature makes it possible to listen to
a selection repeatedly.
Press the repeat button (
) during
playback. The current selection will be
repeated (“RPT” will be displayed).
Press the repeat button (
to cancel repeat playback.
) once again
Random playback
This feature allows the CD player to
randomly select the order of the songs.
Press the random button (
) during
playback. The next selection will be
randomly selected (“RDM” will be
displayed).
Press the random button (
) once
again to cancel random playback.
6-33
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page202
Wednesday, July 8 2009 11:28 AM
Black plate (202,1)
Interior Comfort
Audio System
qOperating the In-Dash CD Changer
Repeat button
Load button
CD slot
CD play button
CD eject button
Channel
preset
buttons
Fast-
forward/Track
up button
Disc down
button
Reverse/Track
down button
Disc up
button
Scan button
Random button
Type
Playable data
2. When “IN” is displayed, insert the CD.
Music CD player
(non-MP3 compatible)
· Music data (CD-DA)
Inserting CDs into desired tray number
1. Press and hold the load button (
)
Inserting the CD
for about 2 seconds until a beep sound
is heard.
The CD must be label-side up when
inserting. The auto-loading mechanism
will set the CD and begin play.
2. Press the channel preset button for the
desired tray number while “WAIT” is
displayed.
NOTE
The CD will begin playback automatically
after insertion.
3. When “IN” is displayed, insert the CD.
A CD cannot be inserted while the display
reads “WAIT”. A beeping sound can be heard
during this waiting time.
There will be a short lapse before play begins
while the player reads the digital signals on
the CD.
NOTE
The CD cannot be inserted to the desired tray
number if the number is already occupied.
Multiple insertion
1. Press and hold the load button (
)
for about 2 seconds until a beep sound
is heard.
Normal insertion
1. Press the load button (
).
6-34
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page203
Wednesday, July 8 2009 11:28 AM
Black plate (203,1)
Interior Comfort
Audio System
2. When “IN” is displayed, insert the CD.
Multiple ejection
1. Press and hold the CD eject button (
3. When “IN” is displayed again, insert
)
the next CD.
for about 2 seconds until a beep sound
is heard.
The “DISC OUT” display flashes.
NOTE
The first-inserted CD will be played
automatically when:
2. Press the CD eject button ( ) again
for less than 5 seconds after the beep
sound is heard.
l
No other CD is inserted within 15 seconds
after “IN” is displayed.
l
The CD trays are full.
NOTE
If the button is not pressed and about 5
seconds have elapsed while “DISC OUT” is
flashing, CDs are automatically ejected.
Displaying the CD-inserted tray
number
When you want to know the number for a
CD-inserted tray, press the display button
3. Pull out the CD, then the next CD will
be ejected.
(
). The tray number will be displayed
for 5 seconds.
NOTE
Ejecting the CD
Normal ejection
l
CDs will be ejected starting with the one
with the lowest number.
l
All CDs in the tray will be ejected
1. Press the CD eject button ( ). The
disc number and “DISC OUT” will be
displayed.
continuously.
l
CDs can be ejected when the ignition
switch is off. Press and hold the CD eject
button ( ) for about 2 seconds and all
CDs will eject.
2. Pull out the CD.
NOTE
Playback
When the CD is ejected during play, the next
CD will be played automatically.
Press the CD play button ( ) to start
play when a CD is in the unit.
If a CD is not in the unit when the CD
play button ( ) is pressed, “NO DISC”
will flash on and off.
Ejecting CDs from desired tray number
1. Press and hold the CD eject button (
for about 2 seconds until a beep sound
is heard.
)
Fast-forward/Reverse
The “DISC OUT” display flashes.
Press and hold the fast-forward button
2. Press the channel preset button for the
desired CD number for less than 5
seconds after the beep sound is heard.
(
) to advance through a track at high
speed.
Press and hold the reverse button ( ) to
reverse through a track at high speed.
3. Pull out the CD.
Track search
Press the track up button ( ) once to skip
forward to the beginning of the next track.
6-35
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page204
Wednesday, July 8 2009 11:28 AM
Black plate (204,1)
Interior Comfort
Audio System
Press the track down button ( ) once to
skip back to the beginning of the current
track.
Message display
If “CHECK CD” is displayed, it means
that there is some CD malfunction. Check
the CD for damage, dirt, or smudges, and
then properly reinsert. If the message
appears again, take the unit to an
Disc search
To change the disc, press the DISC button
(
or
) during playback.
Authorized Mazda Dealer for service.
Music scan
qOperating the Auxiliary jack
This feature helps to find a program by
playing about the first 10 seconds of each
track.
You can connect portable audio units or
similar products on the market to the
auxiliary jack to listen to music or audio
over the vehicle's speakers, refer to
Auxiliary Input (page 6-40).
Press the scan button (
) during
playback to start the scan play operation
(the track number will flash).
Press the scan button (
cancel scan playback.
) again to
NOTE
If the unit is left in scan, normal playback will
resume where scan was selected.
Repeat playback
1. Press the repeat button (
) during
playback to play the current track
repeatedly. “RPT” is displayed.
2. Press the button again to cancel the
repeat playback.
Random playback
Tracks are randomly selected and played.
1. Press the random button (
) during
playback to play the tracks in the CD
randomly. “RDM” is displayed.
2. Press the button again to cancel the
random playback.
6-36
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page205
Wednesday, July 8 2009 11:28 AM
Black plate (205,1)
Interior Comfort
Audio System
qError Indications
If you see an error indication on the display, find the cause in the chart. If you cannot clear
the error indication, take the vehicle to an Authorized Mazda Dealer.
Indication
Cause
Solution
Insert the CD properly. If the error indication continues
to display, consult an Authorized Mazda Dealer.
CD is inserted upside down
CHECK CD
Insert another CD properly. If the error indication
continues to display, consult an Authorized Mazda
Dealer.
CD is defective
6-37
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page206
Wednesday, July 8 2009 11:28 AM
Black plate (206,1)
Interior Comfort
Audio System
With Bluetooth Hands-Free
Audio Control Switch
Operation (Steering Wheel)í
When the audio unit is turned on,
operation of the audio unit from the
steering wheel is possible.
For navigation system equipped vehicles,
refer to the separate manual
“NAVIGATION SYSTEM Owner's
Manual”.
Voice recognition/hands
free switch
-
NOTE
Because the audio unit will be turned off under
the following conditions, the switches will be
inoperable.
NOTE
l
The Voice recognition/hands-free switch is
operable with the audio unit turned off.
Mazda has installed this system to prevent
distraction while driving the vehicle and
using audio controls on the dashboard.
l
When the ignition switch is turned to the
LOCK position.
l
l
When the power button on the audio unit is
pressed and the audio unit is turned off.
l
When the CD being played is ejected and
Always make safe driving your first priority.
the audio unit is turned off.
qAdjusting the Volume
Without Bluetooth Hands-Free
To increase the volume, press the volume
button ( ).
To decrease the volume, press the volume
button ( ).
6-38
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page207
Wednesday, July 8 2009 11:28 AM
Black plate (207,1)
Interior Comfort
Audio System
qChanging the Source
qSeek Switch
Press the mode switch (
) to change
the audio source (FM1 radio → FM2
radio → AM radio → CD player or CD
changer → SIRIUS1 → SIRIUS2 →
SIRIUS3 → AUX → cyclical).
When listening to the radio or SIRIUS
digital satellite radio
Press the seek switch (
,
), the radio
switches to the next/previous stored
station in the order that it was stored
(1―6).
NOTE
CD, CD changer, and SIRIUS digital satellite
radio modes cannot be selected in the
following cases:
· CD, CD changer, or SIRIUS digital satellite
radio unit is not equipped on the audio
system.
Press the seek switch (
,
) for about 2
seconds until a beep sound is heard to
seek all usable stations at a higher or
lower frequency whether programmed or
not.
· CD has not been inserted.
When playing a CD
The AUX mode is locked out unless you
connect a commercially available portable
audio unit to the auxiliary jack. Connect a
portable audio unit or similar product on the
market to the auxiliary jack to listen to music
or audio over the vehicle's speakers. Change
the audio source to AUX mode (page 6-40).
Press the seek switch ( ) to skip to the
next track.
Press the seek switch ( ) to repeat the
current track.
Press the seek switch ( ) for about 2
seconds until a beep sound is heard to
advance through a track at high speed.
Press the seek switch ( ) for about 2
seconds until a beep sound is heard to
reverse through a track at high speed.
6-39
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page208
Wednesday, July 8 2009 11:28 AM
Black plate (208,1)
Interior Comfort
Audio System
qMute Switch
AUX Mode (Auxiliary input)
Press the mute switch ( ) once to mute
audio, press it again to resume audio
output.
You can connect portable audio units or
similar products on the market to the
auxiliary jack to listen to music or audio
over the vehicle's speakers.
NOTE
If the ignition switch is turned to the LOCK
position with the audio muted, the mute will be
canceled.
To use the auxiliary jack, pull up its cover.
Type A
Therefore, when the engine is restarted, the
audio is not muted. To mute the audio again,
press the mute switch ( ).
Type B
6-40
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page209
Wednesday, July 8 2009 11:28 AM
Black plate (209,1)
Interior Comfort
Audio System
NOTE
l
WARNING
Before using the auxiliary jack, read the
manufacturer's instructions for the product
being connected.
Use a commercially-available, non-
impedance (3.5 ) stereo mini plug for
connecting the portable audio unit to the
auxiliary jack. Before using the auxiliary
jack, read the manufacture's instructions
for connecting a portable audio unit to the
auxiliary jack.
To prevent discharging of the battery, do
not use the auxiliary input for long periods
with the engine off or idling.
Noise may occur depending on the product
connected to the auxiliary jack.
With regard to connecting a portable audio
or similar device to a power source, use the
battery for the device, not the accessory
socket.
Do not adjust the portable audio unit
or a similar product while driving the
vehicle:
l
Adjusting the portable audio unit or
a similar product while driving the
vehicle is dangerous as it could
distract your attention from the
vehicle operation which could lead to
a serious accident. Always adjust the
portable audio unit or a similar
product while the vehicle is stopped.
l
Do not allow the connection plug cord
to get tangled with the parking brake
or the shift lever:
l
l
Allowing the plug cord to become
tangled with the parking brake or
the shift lever is dangerous as it
could interfere with driving, resulting
in an accident.
l
l
l
Insert the plug to the auxiliary jack
securely.
Insert or remove the plug with the plug
perpendicular to the auxiliary jack hole.
Insert or remove the plug by holding its
base.
CAUTION
Ø Close the cover when the auxiliary
jack is not in use to prevent
foreign objects and liquids from
penetrating the auxiliary jack.
Ø Do not place objects or apply force
to the auxiliary jack with the plug
connected.
Ø Noise may occur during playback
if the accessory socket equipped
on the vehicle is used. (If noise
occurs, do not use the accessory
socket.)
To listen to a portable audio unit
1. Turn the ignition switch to the ACC or
ON position.
2. Insert the connection plug into the
auxiliary jack.
3. Press the power/volume dial to turn the
audio system on.
6-41
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page210
Wednesday, July 8 2009 11:28 AM
Black plate (210,1)
Interior Comfort
Audio System
4. Press the source change button
(
) of the audio unit or the mode
) of the audio control
switch (
switches on the steering wheel to
change to the AUX mode.
Audio Unit
Audio Control
Switches
NOTE
l
Set the volume of the portable audio unit to
the maximum within the range that the
sound does not become distorted, then
adjust the volume using the power/volume
dial of the audio unit or the volume button
(
,
) of the audio control switch.
l
l
Use your portable audio unit for operations
other than volume adjustment.
If the connection plug is pulled out from the
auxiliary jack while in AUX mode, noise
may occur.
6-42
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page211
Wednesday, July 8 2009 11:28 AM
Black plate (211,1)
Interior Comfort
Audio System
Safety Certification
This CD player is made and tested to meet exacting safety standards. It meets FCC
requirements and complies with safety performance standards of the U.S. Department of
Health and Human Services.
CAUTION
Ø This CD player should not be adjusted or repaired by anyone except qualified
service personnel.
If servicing is required, contact an Authorized Mazda Dealer.
Ø Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous laser exposure. Never operate the CD
player with the top case of the unit removed.
Ø Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
NOTE
For CD player section:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
6-43
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page212
Wednesday, July 8 2009 11:28 AM
Black plate (212,1)
Interior Comfort
Bluetooth Hands-Free
Bluetooth Hands-Freeí
CAUTION
The types of mobile phones which
can be connected to the hands-free
unit are limited. Therefore, before
purchasing or changing your mobile
phone model, consult Mazda
Bluetooth Hands-Free Customer
Service or visit www.MazdaUSA.com/
bluetooth for a complete list of
compatible phones.
Mobile phones which can be
connected to the hands-free system
need to be compliant with Bluetooth
specifications and the appropriate
profile. However, even among these
Bluetooth phones are some which
will not connect with your Mazda or
will have limited function. Therefore,
consult Mazda Bluetooth Hands-Free
Customer Service for information
regarding mobile phone
qWhat is Bluetooth Hands-Free?
Bluetooth Hands-Free Outline
By connecting a Bluetooth equipped
mobile telephone to the hands-free unit
equipped on the vehicle, making and
receiving calls are possible using the
voice recognition/hands-free switch
located on the steering wheel, and saying
the voice commands.
WARNING
Perform phonebook registration related
operations while the vehicle is parked:
Performing phonebook registration
while driving the vehicle could be a
distraction to your driving and result
in an unexpected accident. In
addition, a mistake in performing the
phonebook operation could result in
the loss of important data.
compatibility:
Phone: 800-430-0153
Web: www.MazdaUSA.com/
bluetooth
Bluetooth equipped mobile telephone
A Bluetooth equipped mobile telephone
communicates with the hands-free unit
equipped on the vehicle using radio
transmission (Bluetooth).
For example, if the mobile telephone is
placed in a coat pocket, the phone calls
can be made through your mobile service
without taking out and handling the
mobile telephone.
Applicable Bluetooth specification
Ver. 1.1 or higher
Response profile
l
HFP (Hands Free Profile) Ver. 1.0
DUN (Dial-up Networking Profile)
Ver. 1.1
l
Bluetooth is the registered trademark of
Bluetooth SIG. Inc.
6-44
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page213
Wednesday, July 8 2009 11:28 AM
Black plate (213,1)
Interior Comfort
Bluetooth Hands-Free
NOTE
Voice Recognition/Hands-Free switch
operations
l
The Bluetooth Hands-Free system is
operable several seconds after turning the
ignition switch to the ACC or ON position
(requires less than 15 seconds).
If the ignition switch is turned off during a
hands-free call, the line is transferred to the
mobile telephone automatically.
A short press or a long press of the voice
recognition/hands-free switch is used to
operate the system as follows:
l
l
Short press (Press the button less than
0.7 sec.)
l
Long press (Press the button 0.7 sec. or
l
If the mobile telephone is in a location
more.)
where radio reception is difficult such as a
metal container or in the trunk, the call may
not be connected using Bluetooth. If
communication is not possible, change the
location of the mobile telephone.
Information display
When available, the information display
shows telephone numbers, Bluetooth
Hands-Free messages, and operation
status.
qComponent parts
Bluetooth Hands-Free consists of the
following items:
l
Voice Recognition/Hands-Free switch
Information display
Microphone
Audio unit/Navigation system
l
l
l
Bluetooth phone connected
Voice Recognition/Hands-Free switch
Basic functions of Bluetooth Hands-Free
can be used for such things as making
calls or hanging up using the voice
recognition/hands-free switch on the
steering wheel.
Microphone
The microphone is used for speaking
voice commands or exchanging
conversation.
Microphone
Voice recognition/hands
-
free switch (Phone button)
6-45
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page214
Wednesday, July 8 2009 11:28 AM
Black plate (214,1)
Interior Comfort
Bluetooth Hands-Free
l
Audio unit/Navigation system
Close the windows and/or the
moonroof to reduce loud noises from
outside the vehicle, or turn down the
airflow of the climate control system
while Bluetooth Hands-Free is being
used. Voice recognition may not
function correctly or voice quality may
deteriorate under the following
conditions.
The audio unit or navigation system is
used for adjusting the volume.
If Bluetooth Hands-Free is operated,
information such as mobile phone signal
strength of Bluetooth Hands-Free are
displayed on the screen. (With navigation
system)
l
A passenger is speaking.
l
Driving with the window and/or the
moonroof open.
Driving on bumpy roads.
Noise outside of the vehicle is loud.
l
l
(Construction sites, inside tunnels,
excess oncoming traffic, or heavy
rain.)
l
Operation noise from turn signals,
wipers, or the horn is heard.
A/C airflow is strong or wind is
l
Bluetooth Hands-Free information
blowing on the microphone.
There is noise coming from cargo
loaded in the vehicle.
l
qVoice
l
Voice commands may not be
To prevent the deterioration in voice
recognition rate and voice quality, the
following points must be observed:
recognized depending on the voice. If
the voice commands are not recognized
correctly, repeat the commands in a
louder voice, at a natural pace, as if
speaking to another person.
Dialects or different wording other than
hands-free prompts cannot be
recognized by voice recognition. Speak
in the wording specified by the voice
commands.
l
It is not necessary to face the
microphone or approach it. Speak the
voice commands while maintaining a
safe driving position.
l
NOTE
If the voice recognition performance is not
satisfactory, refer to “Voice Recognition
Learning Function (Speaker Enrollment)”
(page 6-61).
Please be aware that the voice recognition
may error despite following the above
points.
6-46
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page215
Wednesday, July 8 2009 11:28 AM
Black plate (215,1)
Interior Comfort
Bluetooth Hands-Free
NOTE
qFunction restrictions while using
For vehicles with the navigation system, you
can also press the voice recognition/hands-free
switch with a short press and say: [Beep]
“Telephone” or “Phone”.
Bluetooth Hands-Free
Some functions are limited while
Bluetooth Hands-Free is being used. They
include:
l
Beep sound and voice guidance related
to the audio unit and navigation system
are not heard.
Beep sound related to the A/C
operation is not heard.
The navigation system's voice
recognition command does not
function.
The hands-free system is activated.
Functions of the hands-free telephone,
such as making and receiving calls, can be
used after the activation. (For details on
the telephone functions, refer to “Basic
Bluetooth Hands-Free Operation” or
“Convenient Use of the Hands-Free
System”.)
l
l
NOTE
qHow to use this section
For vehicles with a navigation system, the
system operates by speaking the voice
recognition command of the navigation system
after pressing the voice recognition/hands-free
switch with a short press. For voice
recognition details with the navigation system,
refer to the separate “NAVIGATION SYSTEM
MANUAL”.
Descriptions in the text are as follows:
Say: Voice commands to be spoken by
you.
Prompt: Voice guidance output from the
speaker.
NOTE
Say voice commands after the beep sound
[Beep] is heard.
Example)
Say: [Beep] “Dial”
Prompt: “Number, please”
Say: [Beep] “XXXXXXXXXXX (Ex.
“555-1234”) (Telephone number)”
Bluetooth Hands-Free Activation
Method
1. Program the mobile telephone (Pairing)
Refer to Bluetooth Hands-Free
preparation on page 6-48.
2. Press the voice recognition/hands-free
switch with a short press (without
navigation system) or a long press
(with navigation system).
6-47
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page216
Wednesday, July 8 2009 11:28 AM
Black plate (216,1)
Interior Comfort
Bluetooth Hands-Free
4. Say: [Beep] “Language”
Basic Bluetooth Hands-
Free Operation
5. Prompt: “Select a language: English,
French, or Spanish.”
q
Bluetooth Hands-Free preparation
6. Say: [Beep] “French” (Speak the
desired language: “English”, “French”
or “Spanish”)
Language setting
The available languages are English,
Spanish, and Canadian French. If the
language setting is changed, all of the
voice guidance and voice input
commands are done in the selected
language.
NOTE
Other language settings can also be made
while in the current setting by saying the name
of the language in the native pronunciation.
7. Prompt: “French (Desired language)
NOTE
selected. Is this correct?”
l
If the language setting is changed, phone
8. Say: [Beep] “Yes”
registration is maintained.
Phonebook records are not cleared, but
each language has a separate phonebook.
Therefore, entries created in one language
will need to be re-entered in the phonebook
of the new language.
9. Prompt: “French (Desired language)
selected, returning to main menu”
(Spoken in the newly selected
language).
Method 2
l
Do these steps before you start driving.
These less used functions are too
distracting to undertake while driving until
you are fully familiar with the system.
1. Press the voice recognition/hands-free
switch with a short press (without
navigation system) or a long press
(with navigation system).
Method 1
NOTE
1. Press the voice recognition/hands-free
switch with a short press (without
navigation system) or a long press
(with navigation system).
For vehicles with the navigation system, you
can also press the voice recognition/hands-free
switch with a short press and say: [Beep]
“Telephone” or “Phone”.
NOTE
2. Say: [Beep] “French” (Say the desired
language: “English”, “French”, or
“Spanish”.)
For vehicles with the navigation system, you
can also press the voice recognition/hands-free
switch with a short press and say: [Beep]
“Telephone” or “Phone”.
NOTE
Other language settings can also be made
while in the current setting by saying the name
of the language in the native pronunciation.
2. Say: [Beep] “Setup”
3. Prompt: “Select one of the following:
Pairing options, confirmation prompts,
select phone, language, or passcode, or
say “cancel” to return to the main
menu.”
3. Prompt: “Would you like to change
the language to French (Desired
language)?”
6-48
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page217
Wednesday, July 8 2009 11:28 AM
Black plate (217,1)
Interior Comfort
Bluetooth Hands-Free
4. Say: [Beep] “Yes”
4. Prompt: “Select one of the following:
Pairing options, confirmation prompts,
select phone, language, or passcode, or
say “cancel” to return to the main
menu.”
5. Prompt: “Please wait. Switching to
French phone book. French selected,
returning to main menu” (Spoken in
the newly selected language).
5. Say: [Beep] “Pairing options”
Mobile telephone programming
(Pairing)
6. Prompt: “Do you want to pair a
phone, delete a phone, or list paired
phones?”
To use Bluetooth Hands-Free, a mobile
phone equipped with Bluetooth has to be
programmed to the hands-free unit using
the following procedure.
Up to seven Bluetooth equipped mobile
telephones can be programmed to the
vehicle.
7. Say: [Beep] “Pair a phone”
8. Prompt: “Please say a 4-digit pairing
code.”
9. Say: [Beep] “XXXX” (Speak an
arbitrary 4-digit pairing code. This can
be any combination of 4 numbers.)
NOTE
l
A mobile telephone can be programmed
only when the vehicle is parked. If the
vehicle starts to move, the pairing
NOTE
l
Some devices accept only a particular
procedure will end. Programming is
dangerous while driving - pair up your
device before you start driving. Park the
car in a safe place before programming.
Since the communication range of a
Bluetooth equipped mobile telephone is
about 10 meters (32 ft), if a mobile
pairing code (Usually, “0000” or “1234”).
If pairing cannot be completed, refer to the
owner's manual of your mobile device, and
try those numbers if necessary.
Record the code as it will be used to
program your phone in Step 16.
l
l
telephone is placed within a 10-meter (32
ft) radius of the vehicle, it may be detected/
programmed unintentionally while another
telephone is being programmed.
10. Prompt: “Pairing code XXXX (4-
digit number). Is this correct?”
11. Say: [Beep] “Yes” or “No”
12. If “Yes”, go to Step 13.
1. Activate the Bluetooth application of
the mobile telephone.
If “No”, the procedure returns to Step
8.
NOTE
13. Prompt: “Start pairing procedure on
phone. See phone's manual for
instructions.”
For the operation of the mobile telephone,
refer to its instruction manual.
2. Press the voice recognition/hands-free
switch with a short press.
14. Using the mobile telephone, perform
a search for the Bluetooth device
(Peripheral device).
3. Say: [Beep] “Setup”
6-49
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page218
Wednesday, July 8 2009 11:28 AM
Black plate (218,1)
Interior Comfort
Bluetooth Hands-Free
NOTE
23. Prompt: “XXXXXX - - - (Ex.
“Stan's phone”) (Phone tag) set to
priority X (Priority number). Is this
correct?”
For the operation of the mobile telephone,
refer to its instruction manual.
15. Select “Mazda” from the device list
24. Say: [Beep] “Yes”
searched by the mobile phone.
25. Prompt: “Pairing complete”
16. Input the 4-digit pairing code set in
Step 9 to the mobile telephone.
After a mobile telephone is registered, the
system automatically identifies the phone.
By pressing the voice recognition/hands-
free switch again, or by pressing the voice
recognition/hands-free switch first after
turning the ignition switch from the
LOCK to the ACC position, the system
reads out a voice guidance, “XXXXXX -
- - (Ex. “Stan's phone”) (Phone tag) is
connected”. If two or more telephones are
registered, the one with the highest
priority is selected.
17. Prompt: “Please say the name of the
phone after the beep.”
18. Say: [Beep] “XXXX - - -” (Speak a
“phone tag”, an arbitrary name for the
phone.)
Example: “Stan's phone.”
NOTE
Speak a programmed “phone tag” within 10
seconds.
If more than two mobile telephones are to be
programmed, they cannot be programmed with
the same or similar “phone tag”.
NOTE
Depending on the device, the registration
status may be lost after a certain period of
time. If this occurs, repeat the entire process
from Step 1.
19. Prompt: “Adding XXXXXX - - -
(Ex. “Stan's phone”) (Phone tag). Is
this correct?”
20. Say: [Beep] “Yes”
qMaking a call using a telephone
number
21. Prompt: “Assign a priority for this
phone between 1 and 7, where 1 is
the phone used most often.”
NOTE
Practice this while parked until you are
confident you can do it while driving in a non-
taxing road situation. If you are not completely
comfortable, make all calls from a safe
parking position, and move out only when fully
under control and you can devote your eyes
and mind to driving.
22. Say: [Beep] “1” (Speak a number of
the desired priority from 1 to 7.)
NOTE
l
Normally, “1” is to be input (Highest
priority).
l
If more than two mobile telephones are
registered, input the priority order from 1 to
7.
6-50
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page219
Wednesday, July 8 2009 11:28 AM
Black plate (219,1)
Interior Comfort
Bluetooth Hands-Free
1. Press the voice recognition/hands-free
switch with a short press (without
navigation system) or a long press
(with navigation system).
qReceiving an incoming call
1. Prompt: “Incoming call, press the
phone button to answer”.
2. To accept the call, press the voice
recognition/hands-free switch with a
short press.
NOTE
For vehicles with the navigation system, you
can also press the voice recognition/hands-free
switch with a short press and say: [Beep]
“Telephone” or “Phone”.
To reject the call, press the voice
recognition/hands-free switch with a
long press.
2. Say: [Beep] “Dial”
3. Prompt: “Number, please”
4. Say: [Beep] “XXXXXXXXXXX (Ex.
“555-1234”) (Telephone number)”
5. Prompt: “Dialing XXXXXXXXXXX
(Ex. “555-1234”) (Telephone number)
is this correct?”
6. Say: [Beep] “Yes” or “No”.
Voice recognition/hands
-
free switch (Phone button)
7. When “Yes” is spoken, the call is
made.
When “No” is spoken, the procedure
returns to Step 3.
qHanging up a call
Press the voice recognition/hands-free
switch during the call with a long press.
A beep sound will confirm that call is
ended.
NOTE
The “Dial” command and a telephone number
can be combined.
Ex. In Step 2, say, “Dial 123-4567”, then,
Steps 3 and 4 can be skipped.
6-51
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page220
Wednesday, July 8 2009 11:28 AM
Black plate (220,1)
Interior Comfort
Bluetooth Hands-Free
qVolume adjustment
Convenient Use of the
Hands-Free System
The power/volume dial of the audio unit
or navigation system is used to adjust the
volume. Turn the dial to the right to
qPhone book usage
increase volume, to the left to decrease it.
Phone book registration
Audio unit
Navigation system
Phone numbers can be registered to the
Bluetooth Hands-Free phone book.
NOTE
Do this function only when parked. It is too
distracting to attempt while driving and you
may make too many errors to be effective.
1. Press the voice recognition/hands-free
switch with a short press (without
navigation system) or a long press
(with navigation system).
NOTE
NOTE
l
The volume can also be adjusted using the
volume button on the steering wheel.
For vehicles with the navigation system, you
can also press the voice recognition/hands-free
switch with a short press and say: [Beep]
“Telephone” or “Phone”.
l
The music volume of the audio unit and the
navigation system cannot be adjusted while
Bluetooth Hands-Free is being used.
2. Say: [Beep] “Phone book”
qHelp function use
3. Prompt: “Select one of the following:
new entry, edit, list names, delete or
erase all..., or say “cancel” to return to
main menu.”
The help function informs the user of all
the available voice commands under the
current conditions.
1. Press the voice recognition/hands-free
switch with a short press.
4. Say: [Beep] “New entry”
5. Prompt: “Name please.”
2. Say: [Beep] “Help”
6. Say: [Beep] “XXXXX... (Ex. “Mary's
phone”)” (Say a voice tag for the name
registered.)
3. Follow the prompts to receive the
appropriate voice guidance
instructions.
7. Prompt: “Adding XXXXX... (Ex.
“Mary's phone”) (Registered voice
tag). Is this correct?”
8. Say: [Beep] “Yes”
9. Prompt: “Home, Work, Mobile, or
Pager?”
6-52
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page221
Wednesday, July 8 2009 11:28 AM
Black plate (221,1)
Interior Comfort
Bluetooth Hands-Free
10. Say: [Beep] “Mobile” (Say “Home”,
“Work”, “Mobile”, or “Pager”, for the
desired location to be registered.)
NOTE
For vehicles with the navigation system, you
can also press the voice recognition/hands-free
switch with a short press and say: [Beep]
“Telephone” or “Phone”.
11. Prompt: “Mobile (Location to be
registered). Is this correct?”
2. Say: [Beep] “Call”
12. Say: [Beep] “Yes”
3. Prompt: “Name please.”
13. Prompt: “Number, please.”
4. Say: [Beep] “XXXXX... (Ex. “John's
phone”)” (Say a voice tag registered in
the phone book.)
14. Say: [Beep] “XXXXXXXXXXX
(Ex. “555-1234”)” (Say the phone
number to be registered.)
5. Prompt: “Calling XXXXX... (Ex.
“John's phone”) XXXX (Ex. “at
home”). Is this correct?” (Voice tag and
phone number location registered in
phone book).
15. Prompt: “XXXXXXXXXXX (Ex.
“555-1234”) (Phone number
registration). Is this correct? ”
16. Say: [Beep] “Yes”
17. Prompt: “Number saved. Would you
like to add another number for this
entry?”
6. Say: [Beep] “Yes”
7. Prompt: “Dialing”
NOTE
18. Say: [Beep] “Yes” or “No”.
The “Call” command and the voice tag can be
19. If “Yes”, an additional phone number
registration can be made for the same
entry.
combined.
Ex. In Step 2, say, “Call John's phone”, then,
Steps 3 and 4 can be skipped.
If “No”, the procedure proceeds to
Step 20.
qRedialing function
20. Prompt: “Returning to main menu.”
Redialing the number of the person
previously dialed using the phone is
possible.
Making calls using the phone book
Telephone calls can be made by saying
the name of a person (voice tag) whose
phone number has been registered in
Bluetooth Hands-Free in advance.
For the phone book setting method, refer
to (page 6-55).
1. Press the voice recognition/hands-free
switch with a short press (without
navigation system) or a long press
(with navigation system).
NOTE
For vehicles with the navigation system, you
can also press the voice recognition/hands-free
switch with a short press and say: [Beep]
“Telephone” or “Phone”.
1. Press the voice recognition/hands-free
switch with a short press (without
navigation system) or a long press
(with navigation system).
2. Say: [Beep] “Redial”
6-53
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page222
Wednesday, July 8 2009 11:28 AM
Black plate (222,1)
Interior Comfort
Bluetooth Hands-Free
3. Prompt: “Dialing”
2. Say: [Beep] “Mute off”
3. Prompt: “Microphone unmuted”
qEmergency calls
qTransferring a call
A call can be made to the emergency
phone number (911) using the voice input
command.
Transferring a call from Hands-Free to
a mobile phone
1. Press the voice recognition/hands-free
switch with a short press (without
navigation system) or a long press
(with navigation system).
Communication between the hands-free
unit and a mobile phone is canceled, and
the line can be switched to a standard call
using a mobile phone.
NOTE
1. Press the voice recognition/hands-free
switch with a short press.
For vehicles with the navigation system, you
can also press the voice recognition/hands-free
switch with a short press and say: [Beep]
“Telephone” or “Phone”.
2. Say: [Beep] “Transfer call”
3. Prompt: “Transferred call to phone”
2. Say: [Beep] “Emergency”
Transferring a call from a mobile
phone to Hands-Free
3. Prompt: “Calling “911”, is this
correct?”
Communication between mobile phones
can be switched to the Bluetooth Hands-
Free system.
4. Say: [Beep] “Yes”
5. Prompt: “Dialing”
1. Press the voice recognition/hands-free
switch with a short press.
qRefusing an incoming call
2. Say: [Beep] “Transfer call”
For incoming call refusal, refer to
3. Prompt: “Transferred call to Hands
Free system”
qMute
Call waiting
The microphone can be muted during a
call.
A call can be interrupted to receive an
incoming call from a third party.
1. Press the voice recognition/hands-free
switch with a short press.
Call interrupt
A call can be switched to a new incoming
call.
Press the voice recognition/hands-free
switch with a short press.
2. Say: [Beep] “Mute”
3. Prompt: “Microphone muted”
Canceling mute
1. Press the voice recognition/hands-free
switch with a short press.
6-54
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page223
Wednesday, July 8 2009 11:28 AM
Black plate (223,1)
Interior Comfort
Bluetooth Hands-Free
NOTE
NOTE
l
To refuse an incoming call, press the voice
For vehicles with the navigation system, you
can also press the voice recognition/hands-free
switch with a short press and say: [Beep]
“Telephone” or “Phone”.
recognition/hands-free switch with a long
press.
After receiving a new incoming call, the
l
previous call is placed on hold.
2. Say: [Beep] “Phone book”
Switching calls
3. Prompt: “Select one of the following:
new entry, edit, list names, delete or
erase all..., or say “cancel” to return to
main menu.”
Switching back to the previous call can
also be done.
Press the voice recognition/hands-free
switch with a short press.
4. Say: [Beep] “Edit”
Ending the current call
5. Prompt: “Please say the name of the
entry you would like to edit, or say
“List names”..., or say “cancel” to
return to main menu.”
Press the voice recognition/hands-free
switch during the call with a long press.
q
Voice guidance interrupt operation
6. Say: [Beep] “XXXXX... (Ex. “Mary's
phone”)” (Say the voice tag for the
registered name to be edited in the
phone book.)
Voice guidance can be stopped by
pressing the voice recognition/hands-free
switch with a short press while it is being
heard. A new voice input command can
then be spoken by the user.
7. Prompt: “Home, Work, Mobile, or
Pager?”
· Press the voice recognition/hands-free
switch with a short press.
8. Say: [Beep] “Home” (Say the
registered location to be edited:
“Home”, “Work”, “Mobile”, or
“Pager”).
qPhone book settings
Editing phone book
9. Prompt: “XXXXX... (Ex. “Mary's
phone”) (Registered voice tag) XXXX
(Ex. “Home”) (Registered location). Is
this correct?”
The data registered to the Bluetooth
Hands-Free phone book can be edited.
NOTE
Do this function only when parked. It is too
distracting to attempt while driving and you
may make too many errors to be effective.
10. Say: [Beep] “Yes”
11. Prompt: “The current number is
XXXXXXXXXXX (Ex. “555-1234”)
(Currently registered number). New
number, please.”
1. Press the voice recognition/hands-free
switch with a short press (without
navigation system) or a long press
(with navigation system).
NOTE
If there was no previous phone number
registered to a location (Ex. “Work”), the
prompt will only read out “Number, please”.
6-55
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page224
Wednesday, July 8 2009 11:28 AM
Black plate (224,1)
Interior Comfort
Bluetooth Hands-Free
12. Say: [Beep] “XXXXXXXXXXX
(Ex. “666-1234”)” (Say the new
phone number to be registered.)
5. Prompt: “Please say the name of the
entry you would like to delete, or say
“List names”..., or say “cancel” to
return to main menu.”
13. Prompt: “XXXXXXXXXXX (Ex.
“666-1234”) (The new phone number
to be registered). Is this correct?”
6. Say: [Beep] “XXXXX... (Ex. “John's
phone”)” (Say the registered voice tag
to be deleted from the phone book.)
14. Say: [Beep] “Yes”
7. Prompt: “Deleting XXXXX... (Ex.
“John's phone”) (Registered voice tag)
Home (Registered location). Is this
correct?”
15. Prompt: “Number changed. Would
you like to call this number, edit
another entry..., or say “cancel” to
return to main menu.”
8. Say: [Beep] “Yes”
Phone book data deletion
9. Prompt: “XXXXX... (Ex. “John's
phone”) (Registered voice tag) Home
(Registered location) deleted, returning
to main menu.”
Erasing individual phone book data
Individual data registered to the Bluetooth
Hands-Free phone book can be cleared.
NOTE
Complete deletion of the phone book
data
Do this function only when parked. It is too
distracting to attempt while driving and you
may make too many errors to be effective.
All data registered to the Bluetooth
Hands-Free phone book can be erased.
1. Press the voice recognition/hands-free
switch with a short press (without
navigation system) or a long press
(with navigation system).
NOTE
Do this function only when parked. It is too
distracting to attempt while driving and you
may make too many errors to be effective.
NOTE
1. Press the voice recognition/hands-free
switch with a short press (without
navigation system) or a long press
(with navigation system).
For vehicles with the navigation system, you
can also press the voice recognition/hands-free
switch with a short press and say: [Beep]
“Telephone” or “Phone”.
NOTE
2. Say: [Beep] “Phone book”
For vehicles with the navigation system, you
can also press the voice recognition/hands-free
switch with a short press and say: [Beep]
“Telephone” or “Phone”.
3. Prompt: “Select one of the following:
new entry, edit, list names, delete or
erase all..., or say “cancel” to return to
main menu.”
2. Say: [Beep] “Phone book”
4. Say: [Beep] “Delete”
3. Prompt: “Select one of the following:
new entry, edit, list names, delete or
erase all..., or say “cancel” to return to
main menu.”
6-56
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page225
Wednesday, July 8 2009 11:28 AM
Black plate (225,1)
Interior Comfort
Bluetooth Hands-Free
4. Say: [Beep] “Erase all”
5. Prompt: “XXXXX..., XXXXX...,
XXXXX... (Ex. “John's phone”, Mary's
phone, Bill's phone)” (Voice guidance
reads out the voice tags registered to
the phone book.)
5. Prompt: “Are you sure you want to
erase everything from your Hands Free
system phone book?”
6. Say: [Beep] “Yes”
Press the voice recognition/hands-free
switch during the read-out at the desired
name, and then say one of the following
voice commands to execute it.
7. Prompt: “You are about to delete
everything from your Hands Free
system phone book. Do you want to
continue?”
l
“Continue”: Continues the voice
guidance.
“Call”: Calls the registered phone
8. Say: [Beep] “Yes”
l
number.
9. Prompt: “Please wait, erasing the
l
“Edit”: Edits the registered phone
number.
“Delete”: Deletes the registered phone
number.
Hands Free system phone book.”
10. Prompt: “Hands-Free system phone
book erased, returning to main
menu.”
l
l
“Previous”: Returns to the previous
phone number.
“Cancel”: Returns to main menu.
Read-out of names registered to the
Bluetooth Hands-Free phone book
l
6. Prompt: “End of list, would you like
The Bluetooth Hands-Free system can
read out the list of names registered to its
phone book.
to start from the beginning?”
7. Say: [Beep] “No”
1. Press the voice recognition/hands-free
switch with a short press (without
navigation system) or a long press
(with navigation system).
8. Prompt: “Returning to main menu.”
NOTE
For vehicles with the navigation system, you
can also press the voice recognition/hands-free
switch with a short press and say: [Beep]
“Telephone” or “Phone”.
2. Say: [Beep] “Phone book”
3. Prompt: “Select one of the following:
new entry, edit, list names, delete or
erase all..., or say “cancel” to return to
main menu.”
4. Say: [Beep] “List names”
6-57
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page226
Wednesday, July 8 2009 11:28 AM
Black plate (226,1)
Interior Comfort
Bluetooth Hands-Free
7. Prompt: “XXXXX..., XXXXX...,
XXXXX... (Ex. Phone A, phone B,
phone C)” (The voice guidance reads
out the phone tags registered to the
hands-free system.)
Hands-Free Telephone Setting
qMobile phone
Mobile phone registration
For the registration of a Bluetooth
equipped mobile telephone to Bluetooth
Hands-Free, refer to “Bluetooth Hands-
Press the voice recognition/hands-free
switch during the read-out at the desired
phone, and then say one of the following
voice commands to execute it.
l
“Select”: Programmed the mobile
Registered mobile phone read-out
phone when the voice recognition/
hands-free switch was pressed.
“Continue”: Continues the voice
Bluetooth Hands-Free can read-out the
mobile phones registered to its system.
l
guidance.
NOTE
l
“Delete”: Deletes the registered mobile
phone.
“Previous”: Returns to the previous
mobile phone.
Do this function only when parked. It is too
distracting to attempt while driving and you
may make too many errors to be effective.
l
1. Press the voice recognition/hands-free
switch with a short press (without
navigation system) or a long press
(with navigation system).
8. Prompt: “End of list, would you like
to start from the beginning?”
9. Say: [Beep] “No”
NOTE
10. Prompt: “Returning to main menu.”
Mobile phone selection
For vehicles with the navigation system, you
can also press the voice recognition/hands-free
switch with a short press and say: [Beep]
“Telephone” or “Phone”.
This function is for switching to a
different mobile phone which has been
registered beforehand. The selected
mobile phone will remain in effect until
the ignition switch is turned off.
2. Say: [Beep] “Setup”
3. Prompt: “Select one of the following:
pairing options, confirmation prompts,
select phone, language, or passcode...,
or say “cancel” to return to main
menu.”
1. Press the voice recognition/hands-free
switch with a short press (without
navigation system) or a long press
(with navigation system).
4. Say: [Beep] “Pairing options”
NOTE
For vehicles with the navigation system, you
can also press the voice recognition/hands-free
switch with a short press and say: [Beep]
“Telephone” or “Phone”.
5. Prompt: “Do you want to pair a
phone, delete a phone, or list paired
phones?”
6. Say: [Beep] “List phones”
2. Say: [Beep] “Setup”
6-58
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page227
Wednesday, July 8 2009 11:28 AM
Black plate (227,1)
Interior Comfort
Bluetooth Hands-Free
3. Prompt: “Select one of the following:
pairing options, confirmation prompts,
select phone, language, or passcode...,
or say “cancel” to return to main
menu.”
3. Prompt: “Select one of the following:
pairing options, confirmation prompts,
select phone, language, or passcode...,
or say “cancel” to return to main
menu.”
4. Say: [Beep] “Select phone”
4. Say: [Beep] “Pairing options”
5. Prompt: “Please say 1 (priority 1) for
XXXXX... (Ex. phone A), 2 (priority
2) for XXXXX... (Ex. phone B...)”
5. Prompt: “Do you want to pair a
phone, delete a phone, or list paired
phones?”
6. Say: [Beep] “2” (Say the priority
number for the mobile phone to be
used as first priority.)
NOTE
A registered mobile phone can be deleted
using the registration list.
7. Prompt: “XXXXX... (Ex. phone B...)
(Registered phone tag) selected, is this
correct?”
6. Say: [Beep] “Delete phone”
7. Prompt: “Please say 1 (priority 1) for
XXXXX... (Ex. phone A), 2 (priority
2) for XXXXX... (Ex. phone B...)”
(The voice guidance reads out each
phone in the order of priority and the
phone tag).
8. Say: [Beep] “Yes”
9. Prompt: “XXXXX... (Ex. phone B...)
(Phone tag) will temporarily override
phone priorities, returning to main
menu.”
8. Say: [Beep] “2” (Say the order of
priority of the mobile phone to be
deleted.)
Registered mobile phone deletion
Registered mobile phones can be deleted
individually or collectively.
NOTE
Say “All” to delete all mobile phones.
NOTE
Do this function only when parked. It is too
distracting to attempt while driving and you
may make too many errors to be effective.
9. Prompt: “Removing XXXXX... (Ex.
phone B...) (Registered phone tag). Is
this correct?”
10. Say: [Beep] “Yes”
1. Press the voice recognition/hands-free
switch with a short press (without
navigation system) or a long press
(with navigation system).
11. Prompt: “Deleted”
qSecurity setting
NOTE
If a passcode is set, the system cannot be
activated unless the passcode is input.
For vehicles with the navigation system, you
can also press the voice recognition/hands-free
switch with a short press and say: [Beep]
“Telephone” or “Phone”.
NOTE
Do this function only when parked. It is too
distracting to attempt while driving and you
may make too many errors to be effective.
2. Say: [Beep] “Setup”
6-59
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page228
Wednesday, July 8 2009 11:28 AM
Black plate (228,1)
Interior Comfort
Bluetooth Hands-Free
Passcode setting
NOTE
For vehicles with the navigation system, you
can also press the voice recognition/hands-free
switch with a short press and say: [Beep]
“Telephone” or “Phone”.
1. Press the voice recognition/hands-free
switch with a short press (without
navigation system) or a long press
(with navigation system).
2. Prompt:“Hands-Free system is locked.
NOTE
State the passcode to continue.”
For vehicles with the navigation system, you
can also press the voice recognition/hands-free
switch with a short press and say: [Beep]
“Telephone” or “Phone”.
3. Say: [Beep] “XXXX” (Say the set
passcode “PCode”.)
4. If the correct passcode is input, voice
guidance “XXXXXX... (Ex. “Mary's
phone”) (Phone tag) is connected” is
announced.
2. Say: [Beep] “Setup”
3. Prompt:“Select one of the following:
pairing options, confirmation prompts,
select phone, language, or passcode...,
or say “cancel” to return to main
menu.”
If the passcode is incorrect, voice
guidance “XXXX (4-digit passcode,
Pcode) incorrect passcode, please try
again” is announced.
4. Say: [Beep] “Passcode”
Canceling the passcode
5. Prompt: “Passcode is disabled. Would
NOTE
you like to enable it?”
Do this function only when parked. It is too
distracting to attempt while driving and you
may make too many errors to be effective.
6. Say: [Beep] “Yes”
7. Prompt:“Please say a 4-digit passcode.
Remember this passcode. It will be
required to use this system.”
1. Press the voice recognition/hands-free
switch with a short press (without
navigation system) or a long press
(with navigation system).
8. Say: [Beep] “XXXX” (Say a desired 4-
digit passcode, “PCode”.)
NOTE
9. Prompt:“Passcode XXXX (Passcode,
For vehicles with the navigation system, you
can also press the voice recognition/hands-free
switch with a short press and say: [Beep]
“Telephone” or “Phone”.
PCode). Is this correct?”
10. Say: [Beep] “Yes”
11. Prompt:“Passcode is enabled,
returning to main menu.”
2. Say: [Beep] “Setup”
Using Bluetooth Hands-Free with a
passcode
3. Prompt: “Select one of the following:
pairing options, confirmation prompts,
select phone, language, or passcode...,
or say “cancel” to return to main
menu.”
1. Press the voice recognition/hands-free
switch with a short press (without
navigation system) or a long press
(with navigation system).
4. Say: [Beep] “Passcode”
6-60
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page229
Wednesday, July 8 2009 11:28 AM
Black plate (229,1)
Interior Comfort
Bluetooth Hands-Free
5. Prompt:“Passcode is enabled. Would
3. Prompt:“Select one of the following:
pairing options, confirmation prompts,
select phone, language, or passcode...,
or say “cancel” to return to main
menu.”
you like to disable it?”
6. Say: [Beep] “Yes”
7. Prompt:“Passcode is disabled,
returning to main menu.”
4. Say: [Beep] “Confirmation prompts”
Confirmation Prompts
5. Prompt:“Confirmation prompts are
on/off. Would you like to turn
The confirmation prompt confirms the
command content to the user before
advancing to the operation requested by
the user. When this function is turned on,
the system reads out the voice input
command previously received and
confirms whether the command is correct
before advancing to the command
execution.
When the confirmation prompt function is
turned on:
(Ex. “Calling John's phone. Is this
correct?”)
confirmation prompts off/on?”
6. Say: [Beep] “Yes”
7. Prompt:“Confirmation prompts are
off/on, returning to main menu.”
qVoice recognition learning
function (Speaker enrollment)
The voice recognition learning function
enables voice recognition appropriate to
the characteristics of the user's voice.
If the recognition of the voice input
commands to the system is not adequate,
this function can largely improve the
system's voice recognition of the user. If
your voice can be recognized sufficiently
without using this function, you may not
realize the added benefit of the function.
To register your voice, the voice input
command list must be read out. Read out
the list when the vehicle is parked.
Perform the registration in as quiet a place
as possible (page 6-46).
When the confirmation prompt function is
turned off:
(Ex. “Calling John's phone.”)
NOTE
If the confirmation prompt function is turned
off when making an emergency call, the system
reads out and confirms the command before
executing it.
1. Press the voice recognition/hands-free
switch with a short press (without
navigation system) or a long press
(with navigation system).
The registration must be performed
completely. The required time is a few
minutes. The user needs to be seated in
the driver's seat with the voice input
command list for voice recognition
learning open to the page indicated below.
NOTE
For vehicles with the navigation system, you
can also press the voice recognition/hands-free
switch with a short press and say: [Beep]
“Telephone” or “Phone”.
1. Press the voice recognition/hands-free
switch with a short press (without
navigation system) or a long press
(with navigation system).
2. Say: [Beep] “Setup”
6-61
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page230
Wednesday, July 8 2009 11:28 AM
Black plate (230,1)
Interior Comfort
Bluetooth Hands-Free
NOTE
“ (888) 555-1212” must be spoken “Eight,
eight, eight, five, five, five, one, two, one,
two.”
For vehicles with the navigation system, you
can also press the voice recognition/hands-free
switch with a short press and say: [Beep]
“Telephone” or “Phone”.
Phrase
Command
0123456789
1
2
3
4
5
6
7
8
(888) 555-1212
Call
2. Say: [Beep] “Voice training”
3. Prompt: “This operation must be
performed in a quiet environment while
the vehicle is stopped. See the owner's
manual for the list of required training
phrases. Press and release the phone
button when you are ready to begin.
Press and hold the phone button to
cancel at any time.”
Dial
Setup
Cancel
Continue
Help
NOTE
After user voice registration is completed,
voice guidance “Speaker enrollment is
complete, returning to main menu” is
announced.
4. Press the voice recognition/hands-free
switch with a short press.
5. The voice guidance reads out the voice
input command number (refer to the
voice input command list for voice
recognition learning). (Ex. “Please read
phrase 1”)
qDTMF (dual tone multi-
frequency signal) transmission
This function is used when transmitting
DTMF via the user's voice. The receiver
of a DTMF transmission is generally a
home telephone answering machine or a
company's automated guidance call center
(When you send tone signals back
according to the voice guidance
recording).
6. Say: [Beep] “0123456789” (Say the
voice input command for voice
recognition learning (1 to 8) according
to the voice guidance.)
7. Prompt: “Speaker enrollment is
complete, returning to main menu.”
1. Press the voice recognition/hands-free
switch with a short press.
Voice input command list for voice
recognition learning
2. Say: [Beep] “XXXX... send” (Say
When reading out, the following points
must be observed:
DTMF code)
l
Read out the numbers one at a time
3. Prompt: “Sending XXXX... (DTMF
correctly and naturally.
(For example, “1234” must be read out
“one, two, three, four”, not “twelve, thirty
four”.)
code)”
l
Do not read out parentheses. “ (” and
hyphens “-” are used for separating
numbers in a phone number.
Ex.
6-62
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page231
Wednesday, July 8 2009 11:28 AM
Black plate (231,1)
Interior Comfort
Bluetooth Hands-Free
Safety Certification
When Bluetooth Hands-
Free cannot be used
FCC ID: CB2MBLUEC07 IC:279B-
MBLUEC07
This device complies with Part 15 of the
FCC Rules and with RSS-210 of Industry
Canada. Operation is subject to the
following two conditions:
(1) This device may not cause harmful
interference, and
(2) This device must accept any
interference received, including
interference that may cause undesired
operation.
Bluetooth Hands-Free cannot be used
under the following conditions:
l
The mobile telephone is outside of the
communication area.
The mobile telephone has a
l
malfunction.
The mobile telephone is not connected
l
to the hands-free unit equipped on the
vehicle.
The mobile telephone battery is weak.
The mobile telephone is turned off.
The mobile telephone is placed where
l
l
l
WARNING
radio reception is difficult.
Changes or modifications not
expressively approved by the party
responsible for compliance could void
the user's authority to operate the
equipment.
The term “IC: ” before the radio
certification number only signifies that
Industry Canada technical specifications
were met.
The antenna used for this transmitter must
not be co-located or operating in
conjunction with any other antenna or
transmitter. End-users and installers must
be provided with installation instructions
and transmitter operating conditions for
satisfying RF exposure compliance.
6-63
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page232
Wednesday, July 8 2009 11:28 AM
Black plate (232,1)
Interior Comfort
Bluetooth Hands-Free
Mazda Bluetooth Hands-
Free Customer Service
For toll-free Bluetooth Hands-Free
customer service call 800-430-0153 or go
to www.MazdaUSA.com/bluetooth for
assistance.
6-64
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page233
Wednesday, July 8 2009 11:28 AM
Black plate (233,1)
Interior Comfort
Interior Equipment
Sunvisors
Interior Lights
When you need a sunvisor, lower it for
use in front or swing it to the side.
qIlluminated Entry System
When the illuminated entry system
operates, the overhead light (switch is in
the DOOR position) turns on for:
Sunvisor
l
About 30 seconds after the driver's
door is unlocked and the ignition
switch is in the LOCK position (with
the ignition key removed).
l
About 15 seconds after all doors are
closed.
l
About 15 seconds after the ignition
switch is in the LOCK position (with
the ignition key removed) with all
doors closed.
qVanity Mirrors
The light also turns off when:
To use the vanity mirror, lower the
sunvisor.
l
The ignition switch is turned to the ON
position and all doors are closed.
The driver's door is locked.
l
NOTE
Battery saver
If any door is left opened, the light turns off
after about 30 minutes to save the battery.
The light turns on again when the ignition
switch is turned to the ON position, or when
any door is opened after all doors have been
closed.
6-65
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page234
Wednesday, July 8 2009 11:28 AM
Black plate (234,1)
Interior Comfort
Interior Equipment
qOverhead Lights
qMap Lights
Front
The map lights are switched on or off by
pressing the switches.
Switches
Switch Position
Front Overhead Lights
Light off
qLuggage Compartment Light
l
Light is on when any door is
open
l
Light is on or off when the
illuminated entry system is
on
Rear
Switch
Luggage Compartment Light
Position
Light off
Light on when the liftgate is open
Switch Position
Rear Overhead Lights
Light off
l
Light is on when any door is
open
l
Light is on or off when the
illuminated entry system is
on
Light on
6-66
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page235
Wednesday, July 8 2009 11:28 AM
Black plate (235,1)
Interior Comfort
Interior Equipment
Information Display
Climate control display/
Ambient temperature display
Clock
Audio display
qInformation Display Functions
The information display has the following functions:
l
Clock
l
Ambient Temperature Display (Outside Temperature Display, Fully Automatic Type Air
Conditioning System)
Climate Control Display (Fully Automatic Type Air Conditioning System)
Audio Display
l
l
6-67
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page236
Wednesday, July 8 2009 11:28 AM
Black plate (236,1)
Interior Comfort
Interior Equipment
Switching between 12 and 24-hour
clock time
qClock
1. Turn the ignition switch to the ACC or
ON position.
2. Press both time setting buttons (
simultaneously for 1.5 seconds or
more.
,
)
3. “12h” or “24h” is displayed.
4. The selected clock time will be
displayed within three seconds.
qAmbient Temperature Display
Time setting
(Fully Automatic Type)
1. Turn the ignition switch to the ACC or
ON position.
When the ignition switch is in the ON
position, press the AMB switch (page
6-10) to display the ambient temperature.
2. Adjust the time using the time setting
buttons (
,
).
The hours advance while the time
setting button ( ) is pressed.
The minutes advance while the time
setting button ( ) is pressed.
Time resetting
1. Turn the ignition switch to the ACC or
ON position.
2. Press and hold the :00 button for 1.5
seconds or more. The displayed time
flashes.
3. When the button is released, the time
will be reset as follows:
(Example)
12:01―12:29→12:00
12:30―12:59→1:00
NOTE
When the :00 button is released, the seconds
will start at “00”.
6-68
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page237
Wednesday, July 8 2009 11:29 AM
Black plate (237,1)
Interior Comfort
Interior Equipment
NOTE
Cup Holder
l
Under the following conditions, the ambient
temperature display may differ from the
actual ambient temperature depending on
the surroundings and vehicle conditions:
WARNING
Never use a cup holder to hold hot
liquids while the vehicle is moving:
Using a cup holder to hold hot liquids
while the vehicle is moving is
l
Significantly cold or hot temperatures.
Sudden changes in ambient temperature.
The vehicle is parked.
The vehicle is driven at low speeds.
l
l
l
dangerous. If the contents spill, you
could be scalded.
l
Press the AMB switch for a few seconds or
more to switch the display from Fahrenheit
to Centigrade or vice versa.
Press the AMB switch again to switch the
display from ambient temperature to the
temperature set for the air conditioner.
Do not put anything other than cups or
drink cans in cup holders:
l
Putting objects other than cups or
drink cans in a cup holder is
dangerous.
During sudden braking or
maneuvering, occupants could be hit
and injured, or objects could be
thrown around the vehicle, causing
interference with the driver and the
possibility of an accident. Only use a
cup holder for cups or drink cans.
qClimate Control Display (Fully
Automatic Type)
The climate control system status is
displayed. To operate the climate control
system, refer to “Climate Control System”
(page 6-2).
CAUTION
qAudio Display
To reduce the possibility of injury in
an accident or a sudden stop, keep
cup holders closed when not in use.
The audio system status is displayed. To
operate the audio system, refer to
6-69
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page238
Wednesday, July 8 2009 11:29 AM
Black plate (238,1)
Interior Comfort
Interior Equipment
qFront
qRear
Type A
Second-row Seat
To use, open the cover.
Storage box (Second-row right-side
seat)í
To use, pull out the storage box (page
Type B
Top of the center console (Type A)
6-70
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page239
Wednesday, July 8 2009 11:29 AM
Black plate (239,1)
Interior Comfort
Interior Equipment
Inside of the center console (Type A)
To use the cup holder, open the cover.
Bottle Holder
Bottle holders are on the inside of the
doors.
Third-row seat
Bottle holder
Two cup holders are in the side-trim on
both the left and right sides.
CAUTION
Do not use the bottle holders for
containers without caps. The
contents may spill when the door is
opened or closed.
6-71
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page240
Wednesday, July 8 2009 11:29 AM
Black plate (240,1)
Interior Comfort
Interior Equipment
qCenter Console
Storage Compartments
To open, pull the left release latch.
WARNING
Type A
Keep storage boxes closed when
driving:
Driving with the storage boxes open
is dangerous. To reduce the
possibility of injury in an accident or
a sudden stop, keep the storage
boxes closed when driving.
CAUTION
Do not leave lighters or eyeglasses in
the storage boxes while parked under
the sun. A lighter could explode or
the plastic material in eyeglasses
could deform and crack from high
temperature.
Type B
qGlove Box
To open the glove box, pull the latch
toward you.
Insert the key and turn it clockwise to
lock, counterclockwise to unlock.
Unlock
Small items can be placed in the tray of
the center console lid.
To open it, pull the right release latch.
Lock
6-72
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page241
Wednesday, July 8 2009 11:29 AM
Black plate (241,1)
Interior Comfort
Interior Equipment
qUnderseat Storage
CAUTION
If your vehicle has a right second-row
storage box, small items can be stored
under the both bottoms of the second-row
seats.
Do not store items above the marked
line indicated in the illustration
below. If the items are stored above
the marked line, the seat bottom will
not lock and could cause serious
injury.
Marked line
To use the under seat storage
Pull the strap and lift the seat bottom up
and forward.
To return the seat bottom
Carefully lower the seat bottom backward
until it locks in place. Attempt to lift the
seat bottom to make sure it is firmly
locked down.
6-73
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page242
Wednesday, July 8 2009 11:29 AM
Black plate (242,1)
Interior Comfort
Interior Equipment
To use the storage box
CAUTION
1. Pull the strap and lift the seat bottom
up and forward.
When returning the seat-bottom to
its upright position, make sure there
is no object lodged between the
seatback and the seat belt buckle. If
the seat-bottom is returned to its
upright position in this condition it
could damage the seat belt buckle. If
the seat belt buckle does not return
to its position after removing the
obstruction, move the buckle
rearward with your hand and then
lower the seat-bottom.
NOTE
If it is hard to lift the seat bottom, raise the
reclining lever and lean back slightly.
2. Pull out the storage box.
Buckle
qStorage Boxí
The storage box is stowed under the
bottom of the right second-row seat.
Small items can be stored in this box.
6-74
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page243
Wednesday, July 8 2009 11:29 AM
Black plate (243,1)
Interior Comfort
Interior Equipment
3. More items can be stowed if the cover
is removed.
CAUTION
When returning the seat-bottom to
its upright position, make sure there
is no object lodged between the
seatback and the seat belt buckle. If
the seat-bottom is returned to its
upright position in this condition it
could damage the seat belt buckle. If
the seat belt buckle does not return
to its position after removing the
obstruction, move the buckle
rearward with your hand and then
lower the seat-bottom.
NOTE
The cover can be kept in the seatback pocket of
the driver's seat.
4. Carefully lower the seat bottom
backward until it locks in place.
Attempt to lift the seat bottom to make
sure it is firmly locked down.
To stow the storage box
Buckle
1. Clean out the inside of the storage box,
and then attach the cover to it.
2. Pull the strap and lift the seat bottom
up and forward.
qCargo Securing Loops
WARNING
Make sure luggage and cargo is
secured before driving:
3. Make sure the underseat storage area is
empty before storing it.
4. Carefully lower the seat bottom
backward until it locks in place.
Attempt to lift the seat bottom to make
sure it is firmly locked down.
Not securing cargo while driving is
dangerous as it could move or be
crushed during sudden braking or a
collision and cause injury.
When folding the seatback of the right
second-row seat, make sure the storage
box is stowed. If the storage box is not
stowed, it could be damaged.
6-75
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page244
Wednesday, July 8 2009 11:29 AM
Black plate (244,1)
Interior Comfort
Interior Equipment
Use the loops in the luggage compartment
to secure cargo with a rope or net. The
tensile strength of the loops is 196 N (20
kgf, 44 lbf). Do not apply excessive force
to the loops as it will damage them.
qRear Coat Hooks
WARNING
Never hang heavy or sharp objects on
the assist grips and coat hooks:
Hanging heavy or sharp-ended
objects such as a coat hanger from
the assist grips or coat hooks is
dangerous as they can fly off and hit
an occupant in the cabin if a curtain
air bag was to deploy, which could
result in serious injury or death.
Always hang clothes on the coat hooks
and the assist grips without hangers.
Third-row seat
qCargo Sub-Compartment
Lift the cover.
Coat hook
Trunk board
Cargo sub-
compartment
6-76
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page245
Wednesday, July 8 2009 11:29 AM
Black plate (245,1)
Interior Comfort
Interior Equipment
qLuggage Compartment
Accessory Sockets
A golf bag can be carried in the luggage
compartment.
To place a golf bag in the luggage
compartment, use the following
procedure:
The ignition switch must be in the ACC
or ON position
Only use genuine Mazda accessories or
the equivalent requiring no greater than
120 W (DC 12 V, 10 A).
1. Remove the cover for the side storage
space.
Front (Type A)
Front (Type B)
2. Insert the top of the golf bag into the
side storage space.
Side storage space
NOTE
l
Some golf bags cannot fit depending on
their size.
l
Golf bags up to nine inches in diameter can
be carried.
6-77
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page246
Wednesday, July 8 2009 11:29 AM
Black plate (246,1)
Interior Comfort
Interior Equipment
Rear
CAUTION
To prevent accessory socket damage
or electrical failure, pay attention to
the following:
Ø Do not use accessories that require
more than 120 W (DC 12 V, 10 A).
Ø Do not use accessories that are not
genuine Mazda accessories or the
equivalent.
Ø Close the cover when the accessory
socket is not in use to prevent
foreign objects and liquids from
getting into the accessory socket.
Ø Correctly insert the plug into the
accessory socket.
Noise may occur on the audio
playback or TV reception depending
on the device connected to the
accessory socket.
NOTE
To prevent discharging of the battery, do not
use the socket for long periods with the engine
off or idling.
6-78
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page247
Wednesday, July 8 2009 11:29 AM
Black plate (247,1)
In Case of an Emergency
7
Helpful information on what to do in an emergency.
Flat Tire ......................................................................................... 7-3
7-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page248
Wednesday, July 8 2009 11:29 AM
Black plate (248,1)
In Case of an Emergency
Parking in an Emergency
Parking in an Emergency
The hazard warning lights should always
be used when you stop on or near a
roadway in an emergency.
The hazard warning lights warn other
drivers that your vehicle is a traffic hazard
and that they must take extreme caution
when near it.
Depress the hazard warning flasher and all
the turn signals will flash.
NOTE
l
The turn signals do not work when the
hazard warning lights are on.
l
Check local regulations about the use of
hazard warning lights while the vehicle is
being towed to verify that it is not in
violation of the law.
7-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page249
Wednesday, July 8 2009 11:29 AM
Black plate (249,1)
In Case of an Emergency
Flat Tire
Spare Tire and Tool Storage
Spare tire and tools are stored in the locations illustrated in the diagram.
Jack lever
Tiedown eyelet
Lug wrench
Flat tire belt storage bag
Spare tire
Jack
7-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page250
Wednesday, July 8 2009 11:29 AM
Black plate (250,1)
In Case of an Emergency
Flat Tire
To secure the jack
qJack
1. Insert the wing bolt into the jack with
the jack screw pointing down and turn
the wing bolt clockwise to temporarily
tighten it.
To remove the jack
1. Remove the cover.
2. Turn the jack screw in the direction
shown in the figure.
2. Turn the wing bolt and jack screw
counterclockwise.
Wing bolt
Jack screw
3. Turn the wing bolt completely to
secure the jack.
NOTE
If the jack is not completely secured, it could
rattle while driving. Make sure the jack screw
is sufficiently tightened.
Maintenance
Wing bolt
Jack screw
l
Always keep the jack clean.
l
Make sure the moving parts are kept
free from dirt or rust.
Make sure the screw thread is
l
adequately lubricated.
7-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page251
Wednesday, July 8 2009 11:29 AM
Black plate (251,1)
In Case of an Emergency
Flat Tire
qSpare Tire
CAUTION
The temporary spare tire is lighter and
smaller than a conventional tire, and is
designed only for emergency use and
should be used only for VERY short
periods. Temporary spare tires should
NEVER be used for long drives or
extended periods.
Ø When using the temporary spare
tire, driving stability may decrease
compared to when using only the
conventional tire.
Drive carefully.
Ø To avoid damage to the temporary
spare tire or to the vehicle, observe
the following precautions:
WARNING
Ø
Do not exceed 80 km/h (50
mph).
Do not install the temporary spare tire
on the front wheels (driving wheels):
Driving with the temporary spare tire
on one of the front driving wheels is
dangerous. Handling will be affected.
You could lose control of the vehicle,
especially on ice or snow bound
roads, and have an accident. Move a
regular tire to the front wheel and
install the temporary spare tire to the
rear.
Ø
Avoid driving over obstacles.
Also, do not drive through an
automatic car wash. This tire's
diameter is smaller than a
conventional tire, so the ground
clearance is reduced about
25 mm (1 in).
Ø
Ø
Do not use a tire chain on this
tire because it won't fit
properly.
Do not use your temporary
spare tire on any other vehicle;
it has been designed only for
your Mazda.
Use only one temporary spare
tire on your vehicle at the same
time.
Ø
NOTE
(With Tire Pressure Monitoring System)
A tire pressure sensor is not installed to the
temporary spare tire. The warning light will
flash continuously while the temporary spare
tire is being used (page 5-28).
To remove the spare tire
1. Fold the third-row seat forward (page
7-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page252
Wednesday, July 8 2009 11:29 AM
Black plate (252,1)
In Case of an Emergency
Flat Tire
2. Open and fold back the trunk board
over the third-row seatback.
To secure the spare tire
Perform the removal procedure in reverse.
Trunk board
Cargo sub-
compartment
3. Remove the cargo sub-compartment.
4. Turn the tire hold-down bolt
counterclockwise with the lug wrench.
7-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page253
Wednesday, July 8 2009 11:29 AM
Black plate (253,1)
In Case of an Emergency
Flat Tire
NOTE
Changing a Flat Tire
l
Make sure the jack is well lubricated before
using it.
NOTE
(With Tire Pressure Monitoring System)
If the following occurs while driving, it could
indicate a flat tire.
l
Be sure to register the tire pressure sensor
ID signal code whenever tires or wheels are
changed (page 5-30).
l
Steering becomes difficult.
The vehicle begins to vibrate excessively.
l
l
The vehicle pulls in one direction.
1. Park on a level surface off the right-of-
way and firmly set the parking brake.
If you have a flat tire, drive slowly to a
level spot that is well off the road and out
of the way of traffic to change the tire.
Stopping in traffic or on the shoulder of a
busy road is dangerous.
2. Put a vehicle with an automatic
transaxle in Park (P), a manual
transaxle in Reverse (R) or 1, and turn
off the engine.
3. Turn on the hazard warning flasher.
WARNING
Be sure to follow the directions for
changing a tire, and never get under a
vehicle that is supported only by a jack:
Changing a tire is dangerous if not
done properly. The vehicle can slip off
the jack and seriously injure
4. Have everyone get out of the vehicle
and away from the vehicle and traffic.
5. Remove the jack, tool, and spare tire
(page 7-3).
6. Block the wheel diagonally opposite
the flat tire. When blocking a wheel,
place a tire block both in front and
behind the tire.
someone.
Never allow anyone inside a vehicle
supported by a jack:
Allowing someone to remain in a
vehicle supported by a jack is
dangerous. The occupant could cause
the vehicle to fall resulting in serious
injury.
CAUTION
(With Tire Pressure Monitoring
System)
The wheels equipped on your Mazda
are specially designed for installation
of the tire pressure sensors. Do not
use non-genuine wheels, otherwise it
may not be possible to install the tire
pressure sensors.
NOTE
When blocking a tire, use rocks or wood blocks
of sufficient size if possible to hold the tire in
place.
7-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page254
Wednesday, July 8 2009 11:29 AM
Black plate (254,1)
In Case of an Emergency
Flat Tire
qRemoving a Flat Tire
WARNING
1. Loosen the lug nuts by turning them
counterclockwise one turn each, but do
not remove any lug nuts until the tire
has been raised off the ground.
Use only the front and rear jacking
positions recommended in this manual:
Attempting to jack the vehicle in
positions other than those
recommended in this manual is
dangerous. The vehicle could slip off
the jack and seriously injure or even
kill someone.
Use only the jack provided with your
Mazda:
Using a jack that is not designed for
your Mazda is dangerous. The vehicle
could slip off the jack and seriously
injure someone.
Never place objects under the jack:
Jacking the vehicle with an object
under the jack is dangerous. The jack
could slip and someone could be
seriously injured by the jack or the
falling vehicle.
2. Place the jack under the jacking
position closest to the tire being
changed.
3. Insert the jack lever and attach the lug
wrench to tire jack.
Jacking position
7-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page255
Wednesday, July 8 2009 11:29 AM
Black plate (255,1)
In Case of an Emergency
Flat Tire
qLocking Lug Nutsí
4. Turn the lug wrench clockwise and
raise the vehicle high enough so that
the spare tire can be installed. Before
removing the lug nuts, make sure your
Mazda is firmly in position and that it
cannot slip or move.
If your vehicle has optional antitheft
wheel lug nuts, one on each wheel will
lock the tires and you must use a special
key to unlock them. This key is attached
to the lug wrench and is stored with the
spare tire. Register them with the lock
manufacturer by filling out the card
provided in the glove box and mailing it
in the accompanying envelope. If you lose
this key, consult an Authorized Mazda
Dealer or use the lock manufacturer's
order form, which is with the registration
card.
Antitheft lug nut
Special key
5. Remove the lug nuts by turning them
counterclockwise; then remove the
wheel.
To remove an antitheft lug nut
1. Obtain the key for the antitheft lug nut.
2. Place the key on top of the nut, and be
sure to hold the key square to it. If you
hold the key at an angle, you may
damage both key and nut. Don't use a
power impact wrench.
3. Place the lug wrench on top of the key
and apply pressure. Turn the wrench
counterclockwise.
íSome models.
7-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page256
Wednesday, July 8 2009 11:29 AM
Black plate (256,1)
In Case of an Emergency
Flat Tire
To install the nut
3. Install the lug nuts with the beveled
edge inward; tighten them by hand.
1. Place the key on top of the nut, and be
sure to hold the key square to it. If you
hold the key at an angle, you may
damage both key and nut. Don't use a
power impact wrench.
2. Place the lug wrench on top of the key,
apply pressure, and turn it clockwise.
qMounting the Spare Tire
1. Remove dirt and grime from the
mounting surfaces of the wheel and
hub, including the hub bolts, with a
cloth.
WARNING
Do not apply oil or grease to lug nuts
and bolts and do not tighten the lug
nuts beyond the recommended
tightening torque:
Applying oil or grease to lug nuts and
bolts is dangerous. The lug nuts
could loosen while driving and cause
the tire to come off, resulting in an
accident. In addition, lug nuts and
bolts could be damaged if tightened
more than necessary.
4. Turn the lug wrench counterclockwise
and lower the vehicle. Use the lug
wrench to tighten the nuts in the order
shown.
WARNING
Make sure the mounting surfaces of
the wheel, hub and lug nuts are clean
before changing or replacing tires:
When changing or replacing a tire,
not removing dirt and grime from the
mounting surfaces of the wheel, hub
and hub bolts is dangerous. The lug
nuts could loosen while driving and
cause the tire to come off, resulting in
an accident.
2. Mount the spare tire.
7-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page257
Wednesday, July 8 2009 11:29 AM
Black plate (257,1)
In Case of an Emergency
Flat Tire
If you are unsure of how tight the nuts
should be, have them inspected at an
Authorized Mazda Dealer.
8. Return the third-row seatback to its
original position.
Refer to Fold the Third-Row Seat on
page 2-10.
Nut tightening torque
N·m (kgf·m, ft·lbf)
88―118 (9―12, 65―87)
9. Place the flat tire in the cargo sub-
compartment.
WARNING
Always securely and correctly tighten
the lug nuts:
Improperly or loosely tightened lug
nuts are dangerous. The wheel could
wobble or come off. This could result
in loss of vehicle control and cause a
serious accident.
Be sure to reinstall the same nuts you
removed or replace them with metric
nuts of the same configuration:
Because the wheel studs and lug nuts
on your Mazda have metric threads,
using a non-metric nut is dangerous.
On a metric stud, it would not secure
the wheel and would damage the
stud, which could cause the wheel to
slip off and cause an accident.
10. Thread the belt through the wheel as
shown in the figure, then attach the
belt clips to the cargo securing loops
on the back of the third-row seat.
5. Replace the cargo sub-compartment.
6. Remove the lid by pressing the two
latches on the cargo sub-compartment.
7. Remove the belt for securing the flat
tire.
7-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page258
Wednesday, July 8 2009 11:29 AM
Black plate (258,1)
In Case of an Emergency
Flat Tire
NOTE
(With Tire Pressure Monitoring System)
A tire pressure sensor is not installed to the
temporary spare tire. The warning light will
flash continuously while the temporary spare
tire is being used (page 5-28).
NOTE
To prevent the jack and tool from rattling, store
them properly.
11. Pull the belt end to secure the flat tire.
12. Remove the tire blocks and store the
tools and jack.
13. Check the tire inflation pressure.
Refer to the specification charts on
page 10-6.
14. Have the flat tire repaired or replaced
as soon as possible.
WARNING
Do not drive with any tires that have
incorrect air pressure:
Driving on tires with incorrect air
pressure is dangerous. Tires with
incorrect pressure could affect
handling and result in an accident.
When you check the regular tires' air
pressure, check the spare tire, too.
7-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page259
Wednesday, July 8 2009 11:29 AM
Black plate (259,1)
In Case of an Emergency
Overheating
2. Put a vehicle with an automatic
Overheating
transaxle in park (P), a manual
transaxle in neutral.
If the temperature gauge indicates
overheating, the vehicle loses power, or
you hear a loud knocking or pinging
noise, the engine is probably too hot.
3. Apply the parking brake.
4. Turn off the air conditioner.
5. Check whether coolant or steam is
escaping from under the hood or from
the engine compartment.
WARNING
If steam is coming from the engine
compartment:
Do not go near the front of the vehicle.
Stop the engine.
Wait until the steam dissipates, then
open the hood and start the engine.
Turn off the ignition switch and
make sure the fan is not running before
attempting to work near the cooling
fan:
Working near the cooling fan when it
is running is dangerous. The fan
could continue running indefinitely
even if the engine has stopped and
the engine compartment temperature
is high. You could be hit by the fan
and seriously injured.
If neither coolant nor steam is
escaping:
Open the hood and idle the engine until
it cools.
CAUTION
If the cooling fan does not operate
while the engine is running, the
engine temperature will increase.
Stop the engine and call an
Do not remove either cooling
system caps when the engine and
radiator are hot:
When the engine and radiator are
hot, scalding coolant and steam may
shoot out under pressure and cause
serious injury.
Authorized Mazda Dealer.
6. Make sure the cooling fan is operating,
then turn off the engine after the
temperature has decreased.
Open the hood ONLY after steam is no
longer escaping from the engine:
Steam from an overheated engine is
dangerous. The escaping steam could
seriously burn you.
7. When cool, check the coolant reservoir
level.
If it's low, look for coolant leaks from
the radiator and hoses.
If the temperature gauge indicates
overheating:
1. Drive safely to the side of the road and
park off the right-of-way.
7-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page260
Wednesday, July 8 2009 11:29 AM
Black plate (260,1)
In Case of an Emergency
Overheating
If you find a leak or other damage, or if
coolant is still leaking:
Stop the engine and call an Authorized
Mazda Dealer.
Coolant reservoir
Cooling system cap
Cooling fan
If you find no problems, the engine is
cool, and no leaks are obvious:
Carefully add coolant as required (page
CAUTION
If the engine continues to overheat or
frequently overheats, have the
cooling system inspected. The engine
could be seriously damaged unless
repairs are made. Consult an
Authorized Mazda Dealer.
7-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page261
Wednesday, July 8 2009 11:29 AM
Black plate (261,1)
In Case of an Emergency
Emergency Starting
Starting a Flooded Engine
If the engine fails to start, it may be
flooded (excessive fuel in the engine).
Follow this procedure:
1. If the engine does not start within five
seconds on the first try, turn the key to
the LOCK position, wait ten seconds
and try again.
2. Depress the accelerator all the way and
hold it there.
3. Turn the ignition switch to the START
position and hold it there―for up to
ten seconds. If the engine starts, release
the key and accelerator immediately
because the engine will suddenly rev
up.
4. If the engine fails to start, crank it
without depressing the accelerator―for
up to ten seconds.
If the engine still does not start using the
above procedure, have your vehicle
inspected by an Authorized Mazda
Dealer.
7-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page262
Wednesday, July 8 2009 11:29 AM
Black plate (262,1)
In Case of an Emergency
Emergency Starting
Jump-Starting
Jump-starting is dangerous if done incorrectly. So follow the procedure carefully. If you
feel unsure about jump-starting, we strongly recommend that you have a competent service
technician do the work.
WARNING
Follow These Precautions Carefully:
To ensure safe and correct handling of the battery, read the following precautions
carefully before using the battery or inspecting it.
Always wear eye protection when working near the battery:
Working without eye protection is dangerous. Battery fluid contains SULFURIC ACID
which could cause blindness if splashed into your eyes. Also, hydrogen gas produced
during normal battery operation, could ignite and cause the battery to explode.
Wear eye protection and protective gloves to prevent contact with battery
fluid:
Spilled battery fluid is dangerous.
Battery fluid contains SULFURIC ACID which could cause serious injuries if it gets in
eyes, skin or clothing. If this happens, immediately flush your eyes with water for 15
minutes or wash your skin thoroughly and get medical attention.
Always keep batteries out of the reach of children:
Allowing children to play near batteries is dangerous. Battery fluid could cause
serious injuries if it gets in the eyes or on the skin.
Do not allow the positive ( ) terminal to contact any other metal object that
could cause sparks:
Flames and sparks near open battery cells are dangerous. Hydrogen gas, produced
during normal battery operation, could ignite and cause the battery to explode. An
exploding battery can cause serious burns and injuries. When working near a
battery, do not allow metal tools to contact the positive ( ) or negative (
terminal of the battery.
)
7-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page263
Wednesday, July 8 2009 11:29 AM
Black plate (263,1)
In Case of an Emergency
Emergency Starting
Keep all flames, including cigarettes, and sparks away from open battery cells:
Flames and sparks near open battery cells are dangerous. Hydrogen gas, produced
during normal battery operation, could ignite and cause the battery to explode. An
exploding battery can cause serious burns and injuries.
Do not jump-start a frozen battery or one with a low fluid level:
Jump-starting a frozen battery or one with a low fluid level is dangerous. It may
rupture or explode, causing serious injury.
Connect the negative cable to a good ground point away from the battery:
Connecting the end of the second jumper cable to the negative ( ) terminal of the
discharged battery is dangerous.
A spark could cause the gas around the battery to explode and injure someone.
Route the jumper cables away from parts that will be moving:
Connecting a jumper cable near or to moving parts (cooling fans, belts) is dangerous.
The cable could get caught when the engine starts and cause serious injury.
CAUTION
Use only a 12 V booster system. You can damage a 12 V starter, ignition system, and
other electrical parts beyond repair with a 24 V power supply (two 12 V batteries in
series or a 24 V motor generator set).
Connect cables in numerical order and disconnect in reverse order.
Discharged
Jumper cables
battery
Booster battery
7-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page264
Wednesday, July 8 2009 11:29 AM
Black plate (264,1)
In Case of an Emergency
Emergency Starting
1. For vehicles equipped with an engine
cover, remove the engine cover.
CAUTION
Ø Do not use a tool which applies
excessive force such as a
screwdriver or pliers.
Ø If excessive force is applied to the
clips, they could be damaged.
Battery cover
Clip
2. Remove the battery cover from its front
side.
3. Make sure the booster battery is 12 V
and that its negative terminal is
grounded.
4. If the booster battery is in another
vehicle, don't allow both vehicles to
touch. Turn off the engine of the
vehicle with the booster battery and all
unnecessary electrical loads in both
vehicles.
5. Connect the jumper cables in the exact
sequence as in the illustration.
l
Connect one end of a cable to the
positive terminal on the discharged
battery (1).
Attach the other end to the positive
l
terminal on the booster battery (2).
Connect one end of the other cable
l
to the negative terminal of the
booster battery (3).
Connect the other end to the ground
l
point indicated in the illustration
away from the discharged battery
(4).
7-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page265
Wednesday, July 8 2009 11:29 AM
Black plate (265,1)
In Case of an Emergency
Emergency Starting
6. Start the engine of the booster vehicle
and run it a few minutes. Then start the
engine of the other vehicle.
Push-Starting
Do not push-start your Mazda.
7. When finished, carefully disconnect the
cables in the reverse order described in
the illustration.
WARNING
Never tow a vehicle to start it:
Towing a vehicle to start it is
dangerous. The vehicle being towed
could surge forward when its engine
starts, causing the two vehicles to
collide. The occupants could be
injured.
8. If the engine cover and the battery
cover have been removed, install them
as they were previously installed.
NOTE
Verify that the covers are securely installed.
CAUTION
Do not push-start a vehicle that has
a manual transaxle. It can damage
the emission control system.
NOTE
You can't start a vehicle with an automatic
transaxle by pushing it.
7-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page266
Wednesday, July 8 2009 11:29 AM
Black plate (266,1)
In Case of an Emergency
Emergency Towing
Towing Description
CAUTION
Do not tow the vehicle pointed
backward with driving wheels on the
ground. This may cause internal
damage to the transaxle.
We recommend that towing be done only
by an Authorized Mazda Dealer or a
commercial tow-truck service.
Proper lifting and towing are necessary to
prevent damage to the vehicle.
Government and local laws must be
followed.
A towed vehicle usually should have its
drive wheels (front wheels) off the
ground. If excessive damage or other
conditions prevent this, use wheel dollies.
CAUTION
Do not tow with sling-type
equipment. This could damage your
vehicle. Use wheel-lift or flatbed
equipment.
Wheel dollies
When towing with the rear wheels on the
ground, release the parking brake.
If towing service is not available in an
emergency, the vehicle may be towed
with all four wheels on the ground using
the towing hook at the front of the
vehicle.
Only tow the vehicle on paved surfaces
for short distances at low speeds.
7-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page267
Wednesday, July 8 2009 11:29 AM
Black plate (267,1)
In Case of an Emergency
Emergency Towing
Tiedown Hooks
CAUTION
Follow these instructions when
towing the vehicle with all wheels on
the ground.
CAUTION
Do not use the front and rear
tiedown eyelets for towing the
vehicle.
They have been designed only for
securing the vehicle to a transport
vessel during shipping.
Using the eyelets for any other
purpose could result in the vehicle
being damaged.
1. Shift to neutral (MT), or the N
position (AT).
2. Turn the ignition switch to the ACC
position to prevent the steering
from locking up.
3. Release the parking brake.
Remember that power assist for the
brakes and steering will not be
available when the engine is not
running.
qTiedown Hook-Front
1. Remove the tiedown eyelet, lug
wrench, and jack lever from the trunk
(page 7-3).
2. Wrap the jack lever with a soft cloth to
prevent damage to the bumper and
open the cap located on the front
bumper.
CAUTION
The cap cannot be completely
removed. Do not use excessive force
as it may damage the cap or scratch
the painted bumper surface.
7-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page268
Wednesday, July 8 2009 11:29 AM
Black plate (268,1)
In Case of an Emergency
Emergency Towing
3. Securely install the tiedown eyelet
using the lug wrench.
qTiedown Hooks-Rear
Lug wrench
CAUTION
4. Hook the tying rope to the tiedown
eyelet.
The rear tiedown hook is designed
only for lashing the vehicle during
overseas transport. Do not use the
rear tiedown hook for any other use
such as transporting the vehicle on
trucks or railway.
CAUTION
If the tiedown eyelet is not securely
tightened, it may loosen or disengage
from the bumper when tying down
the vehicle. Make sure that the
tiedown eyelet is securely tightened
to the bumper.
7-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page269
Wednesday, July 8 2009 11:29 AM
Black plate (269,1)
In Case of an Emergency
Emergency Towing
Recreational Towing
An example of “recreational towing” is
towing your vehicle behind a motorhome.
The transaxle is not designed for towing
this vehicle on all 4 wheels.
When doing recreational towing refer to
carefully follow the instructions.
7-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page270
Wednesday, July 8 2009 11:29 AM
Black plate (270,1)
7-24
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page272
Wednesday, July 8 2009 11:29 AM
Black plate (272,1)
Maintenance and Care
Introduction
Introduction
Be extremely careful and prevent injury to yourself and others or damage to your vehicle
when using this manual for inspection and maintenance.
If you are unsure about any procedure it describes, we strongly urge you to have a reliable
and qualified service shop perform the work, preferably an Authorized Mazda Dealer.
Factory-trained Mazda technicians and genuine Mazda parts are best for your vehicle.
Without this expertise and the parts that have been designed and made especially for your
Mazda, inadequate, incomplete, and insufficient servicing may result in problems. This
could lead to vehicle damage or an accident and injuries.
For expert advice and quality service, consult an Authorized Mazda Dealer.
The owner should retain evidence that proper maintenance has been performed as
prescribed.
Claims against the warranty resulting from lack of maintenance, as opposed to defective
materials or authorized Mazda workmanship, will not be honored.
Any auto repair shop using parts equivalent to your Mazda's original equipment may
perform maintenance. But we recommend that it always be done by an Authorized
Mazda Dealer using genuine Mazda parts.
8-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page273
Wednesday, July 8 2009 11:29 AM
Black plate (273,1)
Maintenance and Care
Scheduled Maintenance
Scheduled Maintenance (USA, Canada, and Puerto Rico)
Follow Schedule 1 if the vehicle is operated mainly where none of the following conditions
apply.
l
Repeated short-distance driving
Driving in dusty conditions
Driving with extended use of brakes
Driving in areas where salt or other corrosive materials are used
Driving on rough or muddy roads
Extended periods of idling or low-speed operation
Driving for long periods in cold temperatures or extremely humid climates
Driving in extremely hot conditions
l
l
l
l
l
l
l
l
Driving in mountainous conditions continually
If any do apply, follow Schedule 2 (Canada and Puerto Rico residents follow Schedule 2).
NOTE
After the prescribed period, continue to follow the described maintenance at the recommended
intervals.
8-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page274
Wednesday, July 8 2009 11:29 AM
Black plate (274,1)
Maintenance and Care
Scheduled Maintenance
qSchedule 1
Number of months or kilometers (miles), whichever comes first
Months
×1000 km
×1000 miles
6
12
24
15
18
36
24
48
30
30
60
36
72
45
42
84
48
96
60
Maintenance Interval
12
7.5
22.5
37.5
52.5
ENGINE
Audibly inspect every 120,000 km (75,000 miles), if noisy,
adjust
Engine valve clearance
Drive belts
I
Engine oil
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Engine oil filter
COOLING SYSTEM
Replace at first 192,000 km (120,000 miles) or 10 years; after
that, every 96,000 km (60,000 miles) or 5 years
FL22 type*1
Others
Engine coolant
Replace at first 96,000 km (60,000 miles) or 4 years; after that,
every 2 years
FUEL SYSTEM
Air filter
R
Fuel lines and hoses*2
Hoses and tubes for emission*2
IGNITION SYSTEM
Spark plugs
I
I
I
Replace every 120,000 km (75,000 miles)
I
CHASSIS and BODY
Brake lines, hoses and connections
Disc brakes
I
I
I
I
I
Tire (Rotation)
Rotate every 12,000 km (7,500 miles)
I
Steering operation and linkages
I
I
Front and rear suspension, ball joints and wheel
bearing axial play
I
Driveshaft dust boots
I
I
Bolts and nuts on chassis and body
Exhaust system and heat shields
All locks and hinges
T
T
Inspect every 72,000 km (45,000 miles) or 5 years
L
L
L
L
L
L
L
L
8-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page275
Wednesday, July 8 2009 11:29 AM
Black plate (275,1)
Maintenance and Care
Scheduled Maintenance
Number of months or kilometers (miles), whichever comes first
Months
6
12
24
15
18
36
24
48
30
30
60
36
72
45
42
84
48
96
60
Maintenance Interval
×1000 km
12
7.5
×1000 miles
22.5
37.5
52.5
AIR CONDITIONER SYSTEM
Cabin air filter
Replace every 40,000 km (25,000 miles) or 2 years
Chart symbols:
I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.
R: Replace
L: Lubricate
T: Tighten
Remarks:
*1 Use FL22 type coolant in vehicles with the inscription “FL22” on the radiator cap itself or the surrounding
area. Use FL22 when replacing the coolant.
*2 According to state/provincial and federal regulations, failure to perform maintenance on these items will not
void your emissions warranties. However, Mazda recommends that all maintenance services be performed at
the recommended time or mileage/kilometer period to ensure long-term reliability.
8-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page276
Wednesday, July 8 2009 11:29 AM
Black plate (276,1)
Maintenance and Care
Scheduled Maintenance
qSchedule 2
Number of months or kilometers (miles), whichever comes first
Months
×1000 km
×1000 miles
4
8
5
8
12 16 20 24 28 32 36 40 44 48
Maintenance Interval
16 24 32 40 48 56 64 72 80 88 96
10 15 20 25 30 35 40 45 50 55 60
ENGINE
Audibly inspect every 120,000 km (75,000 miles), if noisy,
adjust
Engine valve clearance
Drive belts
I
Puerto Rico
Others
Replace every 5,000 km (3,000 miles) or 3 months
Engine oil
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Engine oil filter
COOLING SYSTEM
Replace at first 192,000 km (120,000 miles) or 10 years; after
that, every 96,000 km (60,000 miles) or 5 years
FL22 type*1
Others
Engine coolant
Replace at first 96,000 km (60,000 miles) or 4 years; after that,
every 2 years
Engine coolant level
I
I
I
I
I
I
I
I
I
I
I
I
FUEL SYSTEM
Puerto Rico
Others
R
R
Air filter
R
Fuel lines and hoses*2
Hoses and tubes for emission*2
IGNITION SYSTEM
Spark plugs
I
I
I
Replace every 120,000 km (75,000 miles)
ELECTRICAL SYSTEM
Function of all lights
CHASSIS and BODY
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Brake lines, hoses and connections
Brake fluid level
I
I
I
I
I
I
I
I
I
I
Disc brakes
Tire (Rotation)
Rotate every 8,000 km (5,000 miles)
Tire inflation pressure and tire wear
Steering operation and linkages
Power steering fluid level
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Front and rear suspension, ball joints and wheel
bearing axial play
I
I
Driveshaft dust boots
I
I
Bolts and nuts on chassis and body
Exhaust system and heat shields
All locks and hinges
T
T
Inspect every 72,000 km (45,000 miles) or 5 years
L
I
L
I
L
I
L
I
L
I
L
I
L
I
L
I
L
I
L
I
L
I
L
I
Washer fluid level
8-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page277
Wednesday, July 8 2009 11:29 AM
Black plate (277,1)
Maintenance and Care
Scheduled Maintenance
Number of months or kilometers (miles), whichever comes first
Months
4
8
5
8
12 16 20 24 28 32 36 40 44 48
Maintenance Interval
×1000 km
16 24 32 40 48 56 64 72 80 88 96
10 15 20 25 30 35 40 45 50 55 60
×1000 miles
AIR CONDITIONER SYSTEM
Cabin air filter
Replace every 40,000 km (25,000 miles) or 2 years
Chart symbols:
I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.
R: Replace
L: Lubricate
T: Tighten
Remarks:
*1 Use FL22 type coolant in vehicles with the inscription “FL22” on the radiator cap itself or the surrounding
area. Use FL22 when replacing the coolant.
*2 According to state/provincial and federal regulations, failure to perform maintenance on these items will not
void your emissions warranties. However, Mazda recommends that all maintenance services be performed at
the recommended time or mileage/kilometer period to ensure long-term reliability.
8-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page278
Wednesday, July 8 2009 11:29 AM
Black plate (278,1)
Maintenance and Care
Scheduled Maintenance
Scheduled Maintenance (Mexico)
Follow Schedule 1 if the vehicle is operated mainly where none of the following conditions
apply.
l
Repeated short-distance driving
Driving in dusty conditions
Driving with extended use of brakes
Driving in areas where salt or other corrosive materials are used
Driving on rough or muddy roads
Extended periods of idling or low-speed operation
Driving for long periods in cold temperatures or extremely humid climates
Driving in extremely hot conditions
l
l
l
l
l
l
l
l
Driving in mountainous conditions continually
If any do apply, follow Schedule 2.
NOTE
After the prescribed period, continue to follow the described maintenance at the recommended
intervals.
8-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page279
Wednesday, July 8 2009 11:29 AM
Black plate (279,1)
Maintenance and Care
Scheduled Maintenance
qSchedule 1
Number of months or kilometers, whichever comes first
Maintenance Interval
Months
6
12 18 24 30 36 42 48 54 60 66 72
×1000 km
10 20 30 40 50 60 70 80 90 100 110 120
ENGINE
Engine valve clearance
Drive belts
Audibly inspect every 120,000 km, if noisy, adjust
I
I
I
Engine oil
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Engine oil filter
COOLING SYSTEM
Cooling system
I
I
I
Replace at first 190,000 km or 10 years; after that, every
60,000 km or 3 years
FL22 type*1
Others
Engine coolant
R
R
R
FUEL SYSTEM
Air filter
R
R
I*2
I*2
R
R
R
I*2
I*2
R
R
R
I
Fuel lines and hoses
Hoses and tubes for emission
Fuel filter
I
R
IGNITION SYSTEM
Spark plugs
Replace every 60,000 km
CHASSIS and BODY
Brake lines, hoses and connections
Brake fluid level
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Brake fluid
R
I
R
I
R
I
Disc brakes
I
I
I
Tire (Rotation)
Rotate every 10,000 km
Tire inflation pressure and tire wear
Steering operation and linkages
Power steering fluid level
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Front and rear suspension, ball joints and wheel
bearing axial play
I
I
I
I
I
I
Driveshaft dust boots
I
T
I
I
T
I
I
T
I
I
T
I
I
T
I
I
T
I
Bolts and nuts on chassis and body
Exhaust system and heat shields
All locks and hinges
L
I
L
I
L
I
L
I
L
I
L
I
L
I
L
I
L
I
L
I
L
I
L
I
Washer fluid level
8-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page280
Wednesday, July 8 2009 11:29 AM
Black plate (280,1)
Maintenance and Care
Scheduled Maintenance
Number of months or kilometers, whichever comes first
Maintenance Interval
Months
6
12 18 24 30 36 42 48 54 60 66 72
×1000 km
10 20 30 40 50 60 70 80 90 100 110 120
AIR CONDITIONER SYSTEM
Cabin air filter
R
R
R
Chart symbols:
I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.
R: Replace
L: Lubricate
T: Tighten
Remarks:
*1 Use FL22 type coolant in vehicles with the inscription “FL22” on the radiator cap itself or the surrounding
area. Use FL22 when replacing the coolant.
*2 According to state/provincial and federal regulations, failure to perform maintenance on these items will not
void your emissions warranties. However, Mazda recommends that all maintenance services be performed at
the recommended time or kilometer period to ensure long-term reliability.
8-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page281
Wednesday, July 8 2009 11:29 AM
Black plate (281,1)
Maintenance and Care
Scheduled Maintenance
qSchedule 2
Number of months or kilometers, whichever comes first
Maintenance Interval
Months
3
5
6
9
12 15 18 21 24 27 30 33 36
×1000 km
10 15 20 25 30 35 40 45 50 55 60
ENGINE
Engine valve clearance
Drive belts
Audibly inspect every 120,000 km, if noisy, adjust
I
Engine oil
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Engine oil filter
COOLING SYSTEM
Cooling system
I
Replace at first 190,000 km or 10 years; after that, every
60,000 km or 3 years
FL22 type*1
Others
Engine coolant
R
Engine coolant level
FUEL SYSTEM
Air filter
I
I
I
I
I
I
I
I
I
I
I
I
C
R
C
R
I*2
I*2
R
C
R
Fuel lines and hoses
Hoses and tubes for emission
Fuel filter
IGNITION SYSTEM
Spark plugs
Replace every 60,000 km
ELECTRICAL SYSTEM
Function of all lights
CHASSIS and BODY
I
I
I
I
I
I
I
I
I
I
I
I
I
Brake lines, hoses and connections
Brake fluid level
I
I
I
I
I
I
I
I
I
I
Brake fluid
R
I
Disc brakes
I
I
Tire (Rotation)
Rotate every 10,000 km
Tire inflation pressure and tire wear
Steering operation and linkages
Power steering fluid level
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Front and rear suspension, ball joints and wheel
bearing axial play
I
I
I
Driveshaft dust boots
I
T
I
I
T
I
I
T
I
Bolts and nuts on chassis and body
Exhaust system and heat shields
All locks and hinges
L
I
L
I
L
I
L
I
L
I
L
I
Washer fluid level
8-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page282
Wednesday, July 8 2009 11:29 AM
Black plate (282,1)
Maintenance and Care
Scheduled Maintenance
Number of months or kilometers, whichever comes first
Maintenance Interval
Months
3
5
6
9
12 15 18 21 24 27 30 33 36
×1000 km
10 15 20 25 30 35 40 45 50 55 60
AIR CONDITIONER SYSTEM
Cabin air filter
R
R
R
Chart symbols:
I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.
R: Replace
L: Lubricate
C: Clean
T: Tighten
Remarks:
*1 Use FL22 type coolant in vehicles with the inscription “FL22” on the radiator cap itself or the surrounding
area. Use FL22 when replacing the coolant.
*2 According to state/provincial and federal regulations, failure to perform maintenance on these items will not
void your emissions warranties. However, Mazda recommends that all maintenance services be performed at
the recommended time or kilometer period to ensure long-term reliability.
8-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page283
Wednesday, July 8 2009 11:29 AM
Black plate (283,1)
Maintenance and Care
Scheduled Maintenance
(Cont.)
Number of months or kilometers, whichever comes first
39 42 45 48 51 54 57 60 63 66 69 72
Maintenance Interval
ENGINE
Months
×1000 km
65 70 75 80 85 90 95 100 105 110 115 120
Engine valve clearance
Drive belts
Audibly inspect every 120,000 km, if noisy, adjust
I
I
Engine oil
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Engine oil filter
COOLING SYSTEM
Cooling system
I
I
Replace at first 190,000 km or 10 years; after that, every
60,000 km or 3 years
FL22 type*1
Others
Engine coolant
R
R
I
Engine coolant level
FUEL SYSTEM
Air filter
I
I
I
I
I
I
I
I
I
I
I
C
R
I*2
I*2
R
C
R
C
R
I
Fuel lines and hoses
Hoses and tubes for emission
Fuel filter
I
R
IGNITION SYSTEM
Spark plugs
Replace every 60,000 km
ELECTRICAL SYSTEM
Function of all lights
CHASSIS and BODY
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Brake lines, hoses and connections
Brake fluid level
I
I
I
I
I
I
I
I
Brake fluid
R
I
R
I
Disc brakes
I
Tire (Rotation)
Rotate every 10,000 km
Tire inflation pressure and tire wear
Steering operation and linkages
Power steering fluid level
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Front and rear suspension, ball joints and wheel
bearing axial play
I
I
I
Driveshaft dust boots
I
T
I
I
T
I
I
T
I
Bolts and nuts on chassis and body
Exhaust system and heat shields
All locks and hinges
L
I
L
I
L
I
L
I
L
I
L
I
Washer fluid level
8-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page284
Wednesday, July 8 2009 11:29 AM
Black plate (284,1)
Maintenance and Care
Scheduled Maintenance
Number of months or kilometers, whichever comes first
Maintenance Interval
Months
×1000 km
39 42 45 48 51 54 57 60 63 66 69 72
65 70 75 80 85 90 95 100 105 110 115 120
AIR CONDITIONER SYSTEM
Cabin air filter
R
R
R
Chart symbols:
I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.
R: Replace
L: Lubricate
C: Clean
T: Tighten
Remarks:
*1 Use FL22 type coolant in vehicles with the inscription “FL22” on the radiator cap itself or the surrounding
area. Use FL22 when replacing the coolant.
*2 According to state/provincial and federal regulations, failure to perform maintenance on these items will not
void your emissions warranties. However, Mazda recommends that all maintenance services be performed at
the recommended time or kilometer period to ensure long-term reliability.
8-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page285
Wednesday, July 8 2009 11:29 AM
Black plate (285,1)
Maintenance and Care
Owner Maintenance
Owner Maintenance Schedule
The owner or a qualified service technician should make these vehicle inspections at the
indicated intervals to ensure safe and dependable operation.
Bring any problem to the attention of an Authorized Mazda Dealer or qualified service
technician as soon as possible.
qWhen Refueling
l
Brake and clutch fluid level (page 8-22)
Engine coolant level (page 8-20)
Engine oil level (page 8-19)
Washer fluid level (page 8-24)
l
l
l
qAt Least Monthly
Tire inflation pressures (page 8-31)
qAt Least Twice a Year (For Example, Every Spring and Fall)
l
Automatic transaxle fluid level (page 8-23)
Power steering fluid level (page 8-23)
l
You can do the following scheduled maintenance items if you have some mechanical
ability and a few basic tools and if you closely follow the directions in this manual.
l
Engine coolant (page 8-20)
Engine oil (page 8-18)
l
8-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page286
Wednesday, July 8 2009 11:29 AM
Black plate (286,1)
Maintenance and Care
Owner Maintenance
Owner Maintenance Precautions
Improper or incomplete service may result in problems. This section gives instructions only
for items that are easy to perform.
qualified service technician with special tools.
Improper owner maintenance during the warranty period may affect warranty coverage.
For details, read the separate Mazda Warranty statement provided with the vehicle. If
you're unsure about any servicing or maintenance procedure, have it done by an
Authorized Mazda Dealer.
There are strict environmental laws regarding the disposal of waste oil and fluids. Please
dispose of your waste properly and with due regard to the environment.
We recommend that you entrust the oil and fluid changes of your vehicle to an Authorized
Mazda Dealer.
WARNING
Do not perform maintenance work if you lack sufficient knowledge and experience or
the proper tools and equipment to do the work. Have maintenance work done by a
qualified technician:
Performing maintenance work on a vehicle is dangerous if not done properly. You
can be seriously injured while performing some maintenance procedures.
If you must run the engine while working under the hood, make certain that you
remove all jewelry (especially rings, bracelets, watches, and necklaces) and all
neckties, scarves, and similar loose clothing before getting near the engine or cooling
fan which may turn on unexpectedly:
Working under the hood with the engine running is dangerous. It becomes even
more dangerous when you wear jewelry or loose clothing.
Either can become entangled in moving parts and result in injury.
Turn off the ignition switch and make sure the fan is not running before attempting
to work near the cooling fan:
Working near the cooling fan when it is running is dangerous. The fan could
continue running indefinitely even if the engine has stopped and the engine
compartment temperature is high. You could be hit by the fan and seriously injured.
Do not leave items in the engine compartment:
After you have finished checking or doing servicing in the engine compartment, do
not forget and leave items such as tools or rags in the engine compartment.
Tools or other items left in the engine compartment could cause engine damage or a
fire leading to an unexpected accident.
8-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page287
Wednesday, July 8 2009 11:29 AM
Black plate (287,1)
Maintenance and Care
Owner Maintenance
Engine Compartment Overview
Automatic transaxle fluid-level
dipstick (only for automatic transaxle)
Engine coolant reservoir
Power steering
fluid reservoir
Brake/Clutch fluid
reservoir
Engine oil-filler cap
Battery
Windshield
washer fluid
reservoir
Fuse block
Cooling System Cap
Engine oil dipstick
8-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page288
Wednesday, July 8 2009 11:29 AM
Black plate (288,1)
Maintenance and Care
Owner Maintenance
Only use oils “Certified For Gasoline
Engines” by the American Petroleum
Institute (API). An oil with this trademark
symbol conforms to the current engine
and emission system protection standards
and fuel economy requirements of the
International Lubricant Standardization
and Approval Committee (ILSAC),
comprised of U.S. and Japanese
Engine Oil
NOTE
Changing the engine oil should be done by an
Authorized Mazda Dealer.
qRecommended Oil
Use SAE 5W-20 engine oil.
Oil container labels provide important
information.
automobile manufacturers.
A chief contribution this type of oil makes
to fuel economy is reducing the amount of
fuel necessary to overcome engine
friction.
–30
–10
10
30
20
40 50
–20
0
–20
80
100
120
0
20 40
60
U.S.A. and CANADA
5W-20
Except U.S.A. and CANADA
(ILSAC)
(ILSAC)
Mexico
Use SAE 5W-20 engine oil. If SAE 5W-20
engine oil is not available in your market. Use
SAE 5W-30 engine oil.
8-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page289
Wednesday, July 8 2009 11:29 AM
Black plate (289,1)
Maintenance and Care
Owner Maintenance
The quality designation SM, or ILSAC
must be on the label.
CAUTION
Do not add engine oil over Full. This
may cause engine damage.
–10
10
30
–30
20
40 50
–20
0
6. Make sure the O-ring on the dipstick is
positioned properly before reinserting
the dipstick.
–20
80
100
120
0
20 40
60
The distance between Low and Full on the
dipstick represents the following:
Oil capacity
5W-20
L (US qt, Imp qt)
0.75 (0.79, 0.66)
qInspecting Engine Oil Level
1. Be sure the vehicle is on a level
surface.
2. Warm up the engine to normal
operating temperature.
3. Turn it off and wait at least 5 minutes
for the oil to return to the oil pan.
4. Pull out the dipstick, wipe it clean, and
reinsert it fully.
Full
OK
Low
5. Pull it out again and examine the level.
The level is normal if it is between
Low and Full.
If it is near or below Low, add enough
oil to bring the level to Full.
8-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page290
Wednesday, July 8 2009 11:29 AM
Black plate (290,1)
Maintenance and Care
Owner Maintenance
Inspect the antifreeze protection and
coolant level in the coolant reservoir at
least once a year―at the beginning of the
winter season―and before traveling
where temperatures may drop below
freezing.
Engine Coolant
qInspecting Coolant Level
WARNING
Do not use a match or live flame in the
engine compartment. DO NOT ADD
COOLANT WHEN THE ENGINE IS HOT:
A hot engine is dangerous. If the
engine has been running, parts of the
engine compartment can become
very hot. You could be burned.
Carefully inspect the engine coolant
in the coolant reservoir, but do not
open it.
Inspect the condition and connections of
all cooling system and heater hoses.
Replace any that are swollen or
deteriorated.
The coolant should be at full in the
radiator and between the F and L marks
on the coolant reservoir when the engine
is cool.
Turn off the ignition switch and
make sure the fan is not running before
attempting to work near the cooling
fan:
Working near the cooling fan when it
is running is dangerous. The fan
could continue running indefinitely
even if the engine has stopped and
the engine compartment temperature
is high. You could be hit by the fan
and seriously injured.
If it's at or near L, add enough coolant to
the coolant reservoir to provide freezing
and corrosion protection and to bring the
level to F.
Do not remove either cooling
system cap when the engine and
radiator are hot:
When the engine and radiator are
hot, scalding coolant and steam may
shoot out under pressure and cause
serious injury.
NOTE
Changing the coolant should be done by an
Authorized Mazda Dealer.
8-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page291
Wednesday, July 8 2009 11:29 AM
Black plate (291,1)
Maintenance and Care
Owner Maintenance
NOTE
CAUTION
If the “FL22” mark is shown on or near the
cooling system cap, it is recommended to use
Mazda Genuine FL22 engine coolant (page
Ø Radiator coolant will damage
paint.
Rinse it off quickly if spilled.
Ø Use only soft (demineralized)
water in the coolant mixture.
Water that contains minerals will
cut down on the coolant's
effectiveness.
Ø Don't add only water. Always add
a proper coolant mixture.
Ø The engine has aluminum parts
and must be protected by an
ethylene-glycol-based coolant to
prevent corrosion and freezing.
Ø DO NOT USE coolants Containing
Alcohol, methanol, Borate or
Silicate.
If the coolant reservoir is empty or new
coolant is required frequently, consult an
Authorized Mazda Dealer.
These coolants could damage the
cooling system.
Ø DO NOT MIX alcohol or methanol
with the coolant. This could
damage the cooling system.
Ø Don't use a solution that contains
more than 60% antifreeze.
This would reduce effectiveness.
8-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page292
Wednesday, July 8 2009 11:29 AM
Black plate (292,1)
Maintenance and Care
Owner Maintenance
qAdding Brake/Clutch Fluid
Brake/Clutch Fluid
WARNING
Be careful not to spill brake fluid on
yourself or on the engine:
q
Inspecting Brake/Clutch Fluid Level
The brakes and clutch draw fluid from the
same reservoir.
Inspect the fluid level in the reservoir
regularly. It should be kept at MAX.
The level normally drops with
accumulated distance, a condition
associated with wear of brake and clutch
linings. If it is excessively low, have the
brake/clutch system inspected by an
Authorized Mazda Dealer.
Spilled brake fluid is dangerous. If it
gets in your eyes, they could be
seriously injured. If this happens,
immediately flush your eyes with
water and get medical attention.
Brake fluid spilled on a hot engine
could cause a fire.
If the brake/clutch fluid level is low,
have the brakes and clutch inspected:
Low brake/clutch fluid levels are
dangerous. Low levels could signal
brake lining wear or a brake system
leak. Your brakes could fail and
cause an accident.
If the fluid level is low, add fluid until it
reaches MAX.
Before adding fluid, thoroughly clean the
area around the cap.
CAUTION
Ø Brake and clutch fluid will
damage painted surfaces. If brake
or clutch fluid does get on a
painted surface, wash it off with
water immediately.
Ø Using nonspecified brake and
damage the systems. Mixing
different fluids will also damage
them.
If the brake/clutch system
frequently requires new fluid,
consult an Authorized Mazda
Dealer.
8-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page293
Wednesday, July 8 2009 11:29 AM
Black plate (293,1)
Maintenance and Care
Owner Maintenance
Power Steering Fluid
Automatic transaxle Fluid
(ATF)
qInspecting Power Steering Fluid
Level
qInspecting Automatic transaxle
Fluid Level
CAUTION
The automatic transaxle fluid level should
be inspected regularly. Measure it as
described below.
To avoid damage to the power
steering pump, don't operate the
vehicle for long periods when the
power steering fluid level is low.
CAUTION
NOTE
Ø Always check the automatic
transaxle fluid level according to
the following procedure. If the
procedure is not done correctly,
the automatic transaxle fluid level
cannot be measured accurately
which could lead to automatic
transaxle damage.
Use specified power steering fluid (page 10-4).
Inspect the fluid level in the reservoir at
each engine oil change with the engine off
and cold. Add fluid if necessary; it does
not require periodic changing.
Ø A low fluid level can cause
transaxle slippage. Overfilling can
cause foaming, loss of fluid, and
transaxle malfunction.
Ø It is recommended to use Mazda
Genuine automatic transaxle fluid
1. Park on a level surface and set the
parking brake firmly.
2. Make sure there is no ATF leakage
from the ATF hose or the housing.
The level must be kept between MIN and
MAX.
3. Shift the shift lever to the park position
(P), start the engine and warm it up.
Visually examine the lines and hoses for
leaks and damage.
CAUTION
If new fluid is required frequently, consult
an Authorized Mazda Dealer.
Do not shift the shift lever while the
engine is warming up. If the ATF level
is extremely low, the automatic
transaxle could be damaged.
8-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page294
Wednesday, July 8 2009 11:29 AM
Black plate (294,1)
Maintenance and Care
Owner Maintenance
4. While the engine is still idling, pull out
the dipstick and wipe it clean, and then
put it back.
Washer Fluid
qInspecting Washer Fluid Level
5. Check the ATF level. If there is no ATF
adhering 5 mm from the end of the
dipstick, add ATF.
WARNING
Use only windshield washer fluid or
plain water in the reservoir:
CAUTION
Using radiator antifreeze as washer
fluid is dangerous. If sprayed on the
windshield, it will dirty the
windshield, affect your visibility, and
could result in an accident.
If there is no ATF adhering to the
dipstick even after the engine has
been warmed up, do not drive the
vehicle. Otherwise, the automatic
transaxle could be damaged.
Using Washer Fluid Without Anti-freeze
Protection in Cold Weather:
6. Shift the shift lever to each range and
position, and make sure there is no
abnormality.
Operating your vehicle in
temperatures below 4 degrees C (40
degrees F) using washer fluid without
anti-freeze protection is dangerous
as it could cause impaired windshield
vision and result in an accident. In
cold weather, always use washer
fluid with anti-freeze protection.
7. Drive the vehicle on city roads for
5 km (3.1 mile) or more.
8. Park on a level surface and set the
parking brake firmly.
9. Shift the shift lever to the park position
(P), check the ATF level while the
engine is idling, and make sure that the
ATF level is within the proper level. If
the ATF level is not within the proper
level, add ATF.
NOTE
State or local regulations may restrict the use
of volatile organic compounds (VOCs), which
are commonly used as anti-freeze agents in
washer fluid. A washer fluid with limited VOC
content should be used only if it provides
adequate freeze resistance for all regions and
climates in which the vehicle will be operated.
The proper fluid level is marked on the
dipstick as follows.
Full
OK
Low
8-24
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page295
Wednesday, July 8 2009 11:29 AM
Black plate (295,1)
Maintenance and Care
Owner Maintenance
Inspect fluid level in the washer fluid
reservoir; add fluid if necessary.
Body Lubrication
All moving points of the body, such as
door and hood hinges and locks, should
be lubricated each time the engine oil is
changed. Use a nonfreezing lubricant on
locks during cold weather.
Make sure the hood's secondary latch
keeps the hood from opening when the
primary latch is released.
To inspect the washer fluid level in the
front reservoir, pull off the cap. Then,
holding your thumb over the hole in the
center of the cap, lift it straight up. The
fluid level can be seen from the fluid
column in the pipe. Add fluid if necessary.
Use plain water if washer fluid is
unavailable. But use only washer fluid in
cold weather to prevent it from freezing.
NOTE
Front and rear washer fluid is supplied from
the same reservoir.
8-25
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page296
Wednesday, July 8 2009 11:29 AM
Black plate (296,1)
Maintenance and Care
Owner Maintenance
q
Replacing Windshield Wiper Blades
Wiper Blades
When the wipers no longer clean well, the
blades are probably worn or cracked.
Replace them.
CAUTION
Ø Hot waxes applied by automatic
car washers have been known to
affect the wiper's ability to clean
windows.
Ø To prevent damage to the wiper
blades, don't use gasoline,
CAUTION
To prevent damage to the wiper arms
and other components, don't try to
sweep the wiper arm by hand.
kerosene, paint thinner, or other
solvents on or near them.
Ø When the wiper lever is in the
AUTO position and the ignition
switch is in the ON position, the
wipers may move automatically in
the following cases:
NOTE
To prevent damage to the wiper arm blades
when raising both the driver and passenger
side wiper arms, raise the driver side wiper
arm first. Conversely, when setting down the
wiper arms, set the passenger side wiper arm
down first.
Ø
Ø
Ø
Ø
If the windshield above the rain
sensor is touched.
If the windshield above the rain
sensor is wiped with a cloth.
If the windshield is struck with
a hand or other object.
If the rain sensor is struck with
a hand or other object from
inside the vehicle.
1. Raise the wiper arm and turn the blade
assembly to expose the plastic locking
clip.
Compress the clip and slide the
assembly downward; then lift it off the
arm.
Be careful not to pinch hands or
fingers as it may cause injury, or
damage the wipers. When
washing or servicing your Mazda,
make sure the wiper lever is in the
OFF position.
Contamination of either the windshield or
the blades with foreign matter can reduce
wiper effectiveness. Common sources are
insects, tree sap, and hot wax treatments
used by some commercial car washes.
Plastic locking clip
CAUTION
If the blades are not wiping properly,
clean the window and blades with a good
cleaner or mild detergent; then rinse
thoroughly with clean water. Repeat if
necessary.
To prevent damage to the windshield
let the wiper arm down easily, don't
let it slap down on the windshield.
8-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page297
Wednesday, July 8 2009 11:30 AM
Black plate (297,1)
Maintenance and Care
Owner Maintenance
2. Hold the end of the rubber and pull
until the tabs are free of the metal
support.
CAUTION
Ø Don't bend or discard the
stiffeners. You need to use them
again.
Ø If the metal stiffeners are
switched, the blade's wiping
efficiency could be reduced.
So don't use the driver's side metal
stiffeners on the passenger's side,
or vice versa.
Ø Be sure to reinstall the metal
stiffeners in the new blade rubber
so that the curve is the same as it
was in the old blade rubber.
Metal support
Tab
3. Remove the metal stiffeners from each
blade rubber and install them in the
new blade.
4. Carefully insert the new blade rubber.
Then install the blade assembly in the
reverse order of removal.
NOTE
Install the blade so that the tabs are toward the
bottom of the wiper arm.
qReplacing Rear Window Wiper
Blade
When the wiper no longer cleans well, the
blade is probably worn or cracked.
Replace it.
8-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page298
Wednesday, July 8 2009 11:30 AM
Black plate (298,1)
Maintenance and Care
Owner Maintenance
3. Remove the metal stiffeners from each
blade rubber and install them in the
new blade.
CAUTION
To prevent damage to the wiper arm
and other components, don't try to
sweep the wiper arm by hand.
1. Raise the wiper arm and rotate the
wiper blade to the right until it unlocks,
then remove the blade.
CAUTION
Don't bend or discard the stiffeners.
You need to use them again.
4. Carefully insert the new blade rubber.
Then install the blade assembly in the
reverse order of removal.
CAUTION
To prevent damage to the rear
window let the wiper arm down
easily, don't let it slap down on the
rear window.
2. Pull down the blade rubber and slide it
out of the blade holder.
8-28
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page299
Wednesday, July 8 2009 11:30 AM
Black plate (299,1)
Maintenance and Care
Owner Maintenance
Battery
WARNING
Read the following precautions carefully before using the battery or inspecting
to ensure safe and correct handling:
Always wear eye protection when working near the battery:
Working without eye protection is dangerous. Battery fluid contains SULFURIC ACID
which could cause blindness if splashed into your eyes. Also, hydrogen gas produced
during normal battery operation, could ignite and cause the battery to explode.
Wear eye protection and protective gloves to prevent contact with battery
fluid:
Spilled battery fluid is dangerous.
Battery fluid contains SULFURIC ACID which could cause serious injuries if it gets in
eyes, or on the skin or clothing. If this happens, immediately flush your eyes with
water for 15 minutes or wash your skin thoroughly and get medical attention.
Always keep batteries out of the reach of children:
Allowing children to play near batteries is dangerous. Battery fluid could cause
serious injuries if it gets in the eyes or on the skin.
Keep flames and sparks away from open battery cells and do not allow metal
tools to contact the positive ( ) or negative ( ) terminal of the battery when
working near a battery. Do not allow the positive ( ) terminal to contact the vehicle
body:
Flames and sparks near open battery cells are dangerous. Hydrogen gas, produced
during normal battery operation, could ignite and cause the battery to explode. An
exploding battery can cause serious burns and injuries. Keep all flames including
cigarettes and sparks away from open battery cells.
Keep all flames, including cigarettes, and sparks away from open battery cells:
Flames and sparks near open battery cells are dangerous. Hydrogen gas, produced
during normal battery operation, could ignite and cause the battery to explode. An
exploding battery can cause serious burns and injuries.
8-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page300
Wednesday, July 8 2009 11:30 AM
Black plate (300,1)
Maintenance and Care
Owner Maintenance
NOTE
qBattery Maintenance
Remove the battery cover before performing
battery maintenance.
To get the best service from a battery:
l
Keep it securely mounted.
Keep the top clean and dry.
Keep terminals and connections clean,
l
CAUTION
l
Ø Do not use a tool which applies
excessive force such as a
tight, and coated with petroleum jelly
or terminal grease.
Rinse off spilled electrolyte
l
screwdriver or pliers.
Ø If excessive force is applied to the
clips, they could be damaged.
immediately with a solution of water
and baking soda.
If the vehicle will not be used for an
l
extended time, disconnect the battery
cables and charge the battery every six
weeks.
qInspecting Electrolyte Level
Battery cover
A low level of electrolyte fluid will cause
the battery to discharge quickly.
Clip
Upper level
Lower level
8-30
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page301
Wednesday, July 8 2009 11:30 AM
Black plate (301,1)
Maintenance and Care
Owner Maintenance
Inspect the electrolyte level at least once a
week. If it's low, remove the caps and add
enough distilled water to bring the level
between the upper and lower level
(illustration).
Tires
For reasons of proper performance, safety,
and better fuel economy, always maintain
recommended tire inflation pressures and
stay within the recommended load limits
and weight distribution.
Don't overfill.
Examine the specific gravity of the
electrolyte with a hydrometer, especially
during cold weather. If it's low, recharge
the battery.
WARNING
Using Different Tire Types:
Driving your vehicle with different
types of tires is dangerous. It could
cause poor handling and poor
braking; leading to loss of control.
Except for the limited use of the
temporary spare tire, use only the
same type tires (radial, bias-belted,
bias-type) on all four wheels.
Using Wrong-Sized Tires:
Using any other tire size than what is
specified for your Mazda (page 10-6)
is dangerous. It could seriously affect
ride, handling, ground clearance, tire
clearance, and speedometer
calibration. This could cause you to
have an accident. Use only tires that
are the correct size specified for your
Mazda.
qTire Inflation Pressure
WARNING
Always inflate the tires to the correct
pressure:
Overinflation or underinflation of
tires is dangerous. Adverse handling
or unexpected tire failure could result
in a serious accident.
Refer to specification charts on page
8-31
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page302
Wednesday, July 8 2009 11:30 AM
Black plate (302,1)
Maintenance and Care
Owner Maintenance
The Tire Pressure Monitoring Systemí
does not alleviate the need to check the
tire condition every day, including
whether the tires all look inflated properly.
Inspect all tire pressure monthly
(including the spare) when the tires are
cold. Maintain recommended pressures
for the best ride, handling, and minimum
tire wear.
NOTE
l
Always check tire pressure when tires are
cold.
l
l
Warm tires normally exceed recommended
pressures. Don't release air from warm tires
to adjust the pressure.
Underinflation can cause reduced fuel
economy, uneven and accelerated tire wear,
and poor sealing of the tire bead, which
will deform the wheel and cause separation
of tire from rim.
When checking the tire pressures, use of a
digital tire pressure gauge is
recommended.
l
Overinflation can produce a harsh ride,
uneven and accelerated tire wear, and a
greater possibility of damage from road
hazards.
Keep your tire pressure at the correct
levels. If one frequently needs inflating,
have it inspected.
qTire Rotation
To equalize tread wear, rotate the tires if
irregular wear develops. According to the
scheduled maintenance charts.Refer to
Scheduled Maintenance on page 8-3.
During rotation, inspect them for correct
balance.
Refer to the specification charts (page
Forward
Do not include (TEMPORARY USE ONLY)
spare tire in rotation.
Also, inspect them for uneven wear and
damage. Abnormal wear is usually caused
by one or a combination of the following:
l
Incorrect tire pressure
8-32
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page303
Wednesday, July 8 2009 11:30 AM
Black plate (303,1)
Maintenance and Care
Owner Maintenance
l
Improper wheel alignment
Out-of-balance wheel
Severe braking
NOTE
l
(With Tire Pressure Monitoring System)
l
l
When tires with steel wire reinforcement in
the sidewalls are used, the system may not
function correctly even with a genuine
wheel.
Refer to System Error Activation on page
After rotation, inflate all tire pressures to
lug nuts for tightness.
l
Be sure to install the tire pressure sensors
whenever tires or wheels are replaced.
Refer to Tires and Wheels on page 5-30.
CAUTION
Rotate unidirectional tires and radial
tires that have an asymmetrical tread
pattern or studs only from front to
rear, not from side to side. Tire
performance will be reduced if
rotated from side to side.
If a tire wears evenly, a wear indicator
will appear as a solid band across the
tread.
Replace the tire when this happens.
qReplacing a Tire
Tread wear indicator
WARNING
Always use tires that are in good
condition:
Driving with worn tires is dangerous.
Reduced braking, steering, and
traction could result in an accident.
New tread
Worn tread
CAUTION
(With Tire Pressure Monitoring
System)
When replacing/repairing the tires or
wheels or both, have the work done
by an Authorized Mazda Dealer, or
the tire pressure sensors may be
damaged.
You should replace it before the band is
across the entire tread.
NOTE
Tires degrade over time, even when they are
not being used on the road. It is recommended
that tires generally be replaced when they are
6 years or older. Heat caused by hot climates
or frequent high loading conditions can
accelerate the aging process. You should
replace the spare tire when you replace the
other road tires due to the aging of the spare
tire. Regarding the manufacturing week and
year is indicated with 4 digit.
Refer to The tire labeling on page 9-23.
8-33
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page304
Wednesday, July 8 2009 11:30 AM
Black plate (304,1)
Maintenance and Care
Owner Maintenance
NOTE
qTemporary Spare Tire
Tires degrade over time, even when they are
not being used on the road. It is recommended
that tires generally be replaced when they are
6 years or older. Heat caused by hot climates
or frequent high loading conditions can
accelerate the aging process. You should
replace the spare tire when you replace the
other road tires due to the aging of the spare
tire. Regarding the manufacturing week and
year is indicated with 4 digit.
Inspect the temporary spare tire at least
monthly to make sure it's properly inflated
and stored.
NOTE
The temporary spare tire condition gradually
deteriorates even if it has not been used.
The temporary spare tire is easier to
handle because of its construction which
is lighter and smaller than a conventional
tire. This tire should be used only for an
emergency and only for a short distance.
Refer to The tire labeling on page 9-23.
qReplacing a Wheel
Use the temporary spare tire only until the
conventional tire is repaired, which should
be as soon as possible.
WARNING
Always use wheels of the correct size
on your vehicle:
Using a wrong-sized wheel is
dangerous. Braking and handling
could be affected, leading to loss of
control and an accident.
Maintain its pressure at 420 kPa (4.2
kgf/cm2 or bar, 60 psi).
CAUTION
Ø Do not use your temporary spare
tire rim with a snow tire or a
conventional tire. Neither will
properly fit and could damage
both tire and rim.
Ø The temporary spare tire has a
tread life of less than 5,000 km
(3,000 miles). The tread life may
be shorter depending on driving
conditions.
Ø The temporary spare tire is for
limited use, however, if the tread
wear solid-band indicator
appears, replace the tire with the
same type of temporary spare
(page 8-33).
8-34
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page305
Wednesday, July 8 2009 11:30 AM
Black plate (305,1)
Maintenance and Care
Owner Maintenance
CAUTION
Ø A wrong-sized wheel may
adversely affect:
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Tire fit
Wheel and bearing life
Ground clearance
Snow-chain clearance
Speedometer calibration
Headlight aim
Bumper height
Tire Pressure Monitoring
System
Ø (With Tire Pressure Monitoring
System)
Ø
When replacing/repairing the
tires or wheels or both, have the
work done by an Authorized
Mazda Dealer, or the tire
pressure sensors may be
damaged.
Ø
The wheels equipped on your
Mazda are specially designed
for installation of the tire
pressure sensors. Do not use
non-genuine wheels, otherwise
it may not be possible to install
the tire pressure sensors.
NOTE
Be sure to install the tire pressure sensors
whenever tires or wheels are replaced. Refer to
Tires and Wheels on page 5-30.
When replacing a wheel, make sure the
new one is the same as the original factory
wheel in diameter, rim width, and offset.
Proper tire balancing provides the best
riding comfort and helps reduce tread
wear. Out-of-balance tires can cause
vibration and uneven wear, such as
cupping and flat spots.
8-35
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page306
Wednesday, July 8 2009 11:30 AM
Black plate (306,1)
Maintenance and Care
Owner Maintenance
Light Bulbs
LED type
High-mount brake light
Bulb type
Rear turn signal lights
Brake
lights/
Rear turn signal lights
Overhead light (Rear)
Taillights
Reverse
lights
Brake lights/Taillights
(Rear side-marker lights)
Rear side-marker lights
Luggage compartment light
License plate lights
Reverse lights
Overhead light/Map lights (Front)
Headlights (Low beam)
Headlights (High beam)
Parking lights/Front turn signal lights/Front side-marker
lights
Fog lights
Some models.
8-36
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page307
Wednesday, July 8 2009 11:30 AM
Black plate (307,1)
Maintenance and Care
Owner Maintenance
3. Perform the following procedure when
replacing the left headlight bulb. Turn
the screws counterclockwise and
remove them and the cover.
WARNING
Do not replace the xenon fusion bulbs
yourself:
Replacing the xenon fusion bulbs
yourself is dangerous. Because the
xenon fusion bulbs require high
voltage, you could receive an electric
shock if the bulbs are handled
incorrectly. Consult an Authorized
Mazda Dealer when the replacement
is necessary.
Battery cover
Never touch the glass portion of a
halogen bulb with your bare hands and
always wear eye protection when
handling or working around the bulbs:
When a halogen bulb breaks, it is
dangerous. These bulbs contain
pressurized gas. If one is broken, it
will explode and serious injuries
could be caused by the flying glass.
If the glass portion is touched with
bare hands, body oil could cause the
bulb to overheat and explode when
lit.
Battery duct
4. Find the high and low beam bulbs in
the rear of the headlight unit.
The outboard bulb is the LOW beam,
and the inboard one is the HIGH beam
(page 8-36).
High-beam bulb
1. Turn the socket and bulb assembly
counterclockwise, and carefully pull it
backward.
Always keep halogen bulbs out of the
reach of children:
2. Disconnect the socket and bulb
assembly from the electrical connector
by pressing the tab on the connector
with your finger and pulling it.
Playing with a halogen bulb is
dangerous. Serious injuries could be
caused by dropping a halogen bulb
or breaking it some other way.
qReplacing Exterior Light Bulbs
Headlight bulbs
1. Make sure the ignition is switched off
and the headlight switch is off.
2. Lift the hood.
8-37
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page308
Wednesday, July 8 2009 11:30 AM
Black plate (308,1)
Maintenance and Care
Owner Maintenance
3. Install the new socket and bulb
assembly in the reverse order of
removal.
3. Unhook the bulb retaining spring.
NOTE
l
If the halogen bulb is accidentally touched,
it should be cleaned with rubbing alcohol
before being used.
l
Use the protective cover and carton for the
replacement bulb to dispose of the old bulb
promptly and out of the reach of children.
Low-beam bulb
(Xenon fusion bulb)
4. Swing the retaining spring out and
away to free the headlight bulb.
You cannot replace the low beam bulbs by
yourself.
The bulbs must be replaced at an
Authorized Mazda Dealer.
5. Carefully remove the socket and bulb
assembly by pulling it straight back.
6. Remove the headlight bulb from the
socket.
(Halogen bulb)
1. Disconnect the electrical connector
from the bulb by pulling it to the rear.
7. Install the new socket and bulb
assembly in the reverse order of
removal.
2. Pull off the sealing cover.
8-38
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page309
Wednesday, July 8 2009 11:30 AM
Black plate (309,1)
Maintenance and Care
Owner Maintenance
NOTE
4. Disconnect the socket and bulb
l
If the halogen bulb is accidentally touched,
it should be cleaned with rubbing alcohol
before being used.
assembly from the electrical connector
by pressing the tab on the connector
with your finger and pulling it.
l
Use the protective cover and carton for the
replacement bulb to dispose of the old bulb
promptly and out of the reach of children.
l
When reinstalling the sealing cover, make
sure
faces up.
Fog light bulbsí
1. Make sure the ignition is switched off
and the headlight switch is off.
2. Remove the three screws under the
mudguard by turning them
counterclockwise, and partially open
the mudguard.
5. Install the new socket and bulb
assembly in the reverse order of
removal.
NOTE
l
If the halogen bulb is accidentally touched,
it should be cleaned with rubbing alcohol
before being used.
l
Use the protective cover and carton for the
replacement bulb to dispose of the old bulb
promptly and out of the reach of children.
Parking lights/Front turn signal lights/
Front side-marker lights
3. Turn the socket and bulb assembly
counterclockwise, and carefully pull it
rearward.
1. Make sure the ignition is switched off
and the headlight switch is off.
íSome models.
8-39
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page310
Wednesday, July 8 2009 11:30 AM
Black plate (310,1)
Maintenance and Care
Owner Maintenance
2. Turn the center section of the plastic
retainers counterclockwise and remove
them, then partially peel back the
mudguard.
2. Wrap a flathead screwdriver with a soft
cloth to prevent damage to the rear
combination component and gently
insert it in the cover as shown in the
figure, and then remove the cover.
Removal
Installation
3. Turn the socket and bulb assembly
counterclockwise and remove it.
3. Turn the screws counterclockwise and
remove them.
4. Remove the bulb by pushing it in
slightly and turning it
4. Turn the socket and bulb assembly
counterclockwise and remove it.
counterclockwise.
5. Disconnect the bulb from the socket.
Bulb type
Rear turn signal
lights
Reverse lights
Brake lights/Tail
lights (Rear side-
marker lights)
5. Install the new bulb in the reverse order
of removal.
Brake lights/Taillights (Rear side-
marker lights), Rear turn signal lights,
Reverse lights
1. Make sure the ignition is switched off
and the headlight switch is off.
8-40
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page311
Wednesday, July 8 2009 11:30 AM
Black plate (311,1)
Maintenance and Care
Owner Maintenance
3. Pull the socket and bulb assembly and
remove it.
LED type
Rear turn signal
lights
4. Disconnect the bulb from the socket.
Reverse lights
NOTE
The LED-type bulbs for the brake lights/
Taillights (Rear side-marker lights) cannot be
replaced by the customer. For bulb
replacement, consult an Authorized Mazda
Dealer.
5. Install the new bulb in the reverse order
of removal.
qReplacing Interior Light Bulbs
6. Install the new bulb in the reverse order
of removal.
Overhead light/Map lights (Front)
High-mount brake light
1. Wrap a flathead screwdriver with a soft
cloth to prevent damage to the trim and
gently insert it in the overhead light as
shown in the figure, and then remove
the overhead light unit.
Due to the complexity and difficulty of
the procedure, the LED bulbs should be
replaced by an Authorized Mazda Dealer.
License plate lights
1. Make sure the ignition is switched off
and the headlight switch is off.
2. Remove the liftgate cover.
2. Turn the socket and bulb assembly
counterclockwise and remove it.
8-41
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page312
Wednesday, July 8 2009 11:30 AM
Black plate (312,1)
Maintenance and Care
Owner Maintenance
3. Disconnect the bulb from the socket.
Luggage compartment light
1. Wrap a flathead screwdriver with a soft
cloth to prevent damage to the trim and
gently insert it in the luggage
compartment light as shown in the
figure, and then remove the luggage
compartment light unit.
2. Disconnect the bulb by pulling it out.
4. Install the new bulb in the reverse order
of removal.
Overhead light (Rear)
1. Wrap a small flathead screwdriver with
a soft cloth to prevent damage to the
lens and remove the lens by carefully
prying on the edge of the lens with the
flathead screwdriver.
3. Install the new bulb in the reverse order
of removal.
2. Disconnect the bulb by pulling it out.
3. Install the new bulb in the reverse order
of removal.
8-42
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page313
Wednesday, July 8 2009 11:30 AM
Black plate (313,1)
Maintenance and Care
Owner Maintenance
3. Locate the position of the suspected
fuse by using the chart inside the fuse
block cover.
Fuses
Your vehicle's electrical system is
protected by fuses.
4. Pull the fuse straight out with the fuse
puller provided on the inside of the
engine compartment fuse block cover.
If any lights, accessories, or controls don't
work, inspect the appropriate circuit
protector. If a fuse has blown, the inside
element will be melted.
If the same fuse blows again, avoid using
that system and consult an Authorized
Mazda Dealer as soon as possible.
qFuse Replacement
Replacing the fuses on the passenger's
side
If the electrical system does not work,
first inspect the fuses on the passenger's
side.
5. Inspect the fuse and replace it if it's
blown.
1. Turn off the ignition switch and other
switches.
2. Remove the cover.
Blown
Normal
6. Insert a new fuse of the same amperage
rating, and make sure it fits tightly. If it
does not fit tightly, have an expert
install it. We recommend an
Authorized Mazda Dealer.
If you have no spare fuses, borrow one
of the same rating from a circuit not
essential to vehicle operation, such as
the MIRROR or CIGAR circuit.
CAUTION
Pulling the cover off sideways may
break the retaining tabs off.
8-43
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page314
Wednesday, July 8 2009 11:30 AM
Black plate (314,1)
Maintenance and Care
Owner Maintenance
WARNING
CAUTION
Do not replace the main fuse by
yourself. Have an Authorized Mazda
Dealer perform the replacement:
Replacing the fuse by yourself is
dangerous because the MAIN fuse is
a high current fuse. Incorrect
replacement could cause an electrical
shock or a short circuit resulting in a
fire.
Always replace a fuse with one of the
same rating. Otherwise you may
damage the electric system.
Replacing the fuses under the hood
If the headlights or other electrical
components do not work and the fuses in
the cabin are normal, inspect the fuse
block under the hood. If a fuse is blown, it
must be replaced. Follow these steps:
1. Turn off the ignition switch and all
other switches.
2. Remove the fuse block cover.
Main fuse
3. If any fuse but the MAIN fuse is
blown, replace it with a new one of the
same amperage rating.
Normal
Blown
8-44
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page315
Wednesday, July 8 2009 11:30 AM
Black plate (315,1)
Maintenance and Care
Owner Maintenance
qFuse Panel Description
Fuse block (Engine compartment)
FUSE
DESCRIPTION
PROTECTED COMPONENT
RATING
1
2
FAN
FAN
30 A
30 A
40 A
30 A
30 A
20 A
20 A
30 A
20 A
40 A
20 A
40 A
20 A
40 A
20 A
60 A
40 A
Cooling fan
Cooling fan
P.WIND*1
Power windows
3
4
R.BLOWER*2
IG KEY1 INJ*1
IG KEY2*2
ABS-V
Rear blower motor
For protection of various circuits
―
5
6
ABS
ABS
ABS-P
IG KEY2*1
IG KEY1*2
HEATER DEICER TCM
BLOWER*1
F.BLOWER*2
GLOW IG KEY1*1
F.BLOWER*2
BTN
―
7
8
9
For protection of various circuits
―
Blower motor
Front blower motor
For protection of various circuits
Front blower motor
10
11
12
For protection of various circuits
IG KEY2
―
8-45
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page316
Wednesday, July 8 2009 11:30 AM
Black plate (316,1)
Maintenance and Care
Owner Maintenance
FUSE
DESCRIPTION
PROTECTED COMPONENT
RATING
13
14
15
16
17
18
19
20
21
22
23
24
CLOSER P.SLIDE LH
CLOSER P.SLIDE RH
EHPAS
20 A
20 A
80 A
15 A
20 A
20 A
10 A
25 A
10 A
10 A
20 A
10 A
Easy closerí
Easy closerí
Electro-Hydraulic Power Assist Steering
Fog lightsí
FOG
D.LOCK
Power door lock
P.WIND H/CLEAN
ETC
Power windows
Accelerator position sensor
Rear window defroster
PCM
DEFOG
ENG+B
STOP
Brake lights
FUEL
Fuel pump
HAZARD
Turn signals, Hazard warning flashers
Overhead lights, Map lights, Luggage compartment light, For
protection of various circuits
25
ROOM
15 A
26
27
―
―
―
MAG
10 A
7.5 A
―
Magnet clutch
GLOW SIG*1
*2
―
―
28
―
29
30
31
32
HEAD HR
HEAD HL
10 A
10 A
15 A
20 A
7.5 A
―
Headlight high beam (RH)
Headlight high beam (LH)
HORN
Horn
Moonroofí
Theft-Deterrent Systemí
SUN ROOF
MIRROR BURGLAR*1
*2
―
33
―
Headlight low beam (RH), Manual headlight levelingí
Headlight low beam (LH)
O2 heater
34
35
36
37
38
39
HEAD LR
HEAD LL
ENG BAR2
ENG BAR
INJ ENG BA
ILLUMI
15 A
15 A
15 A
15 A
20 A
10 A
Air flow sensor, Engine control system
Injector
Illumination
Taillights, Parking lights, License plate lights, For protection of
various circuits
40
TAIL
10 A
*1 Without rear ventilation system
*2 With rear ventilation system
8-46
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page317
Wednesday, July 8 2009 11:30 AM
Black plate (317,1)
Maintenance and Care
Owner Maintenance
Fuse block (Passenger's side)
FUSE
DESCRIPTION
PROTECTED COMPONENT
RATING
7.5 A
―
1
2
M.DEF
―
Mirror defrosterí
―
3
ENG3
20 A
15 A
5 A
Ignition switch
Accessory Socket
AT shiftí
4
P.OUTLET
SHIFT/L
CIGAR
MIRROR
A/C
5
6
15 A
7.5 A
10 A
25 A
15 A
5 A
Lighter
7
Power control mirror, Audio systemí
8
Air conditioner
9
F.WIP
R.WIP
ENG
Windshield wipers and washer
Rear window wiper and washer
Main relay
10
11
12
13
14
15
16
17
18
19
METER
SAS
10 A
10 A
15 A
5 A
Instrument cluster
Supplemental restraint systems
Seat warmerí
S.WARM
ABS/DSC
EHPAS
ENG2
ABS
5 A
Electro-Hydraulic Power Assist Steering
―
15 A
30 A
―
P/W
Power windows
P/W
―
íSome models.
8-47
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page318
Wednesday, July 8 2009 11:30 AM
Black plate (318,1)
Maintenance and Care
Appearance Care
qDamage Caused by Bird
How to Minimize
Environmental Paint Damage
Dropping, Insects, or Tree Sap
Occurrence
The paintwork on your Mazda represents
the latest technical developments in
composition and methods of application.
Bird droppings contain acids. If these
aren't removed they can eat away the clear
and color base coat of the vehicle's
paintwork.
Environmental hazards, however, can
harm the paint's protective properties, if
proper care is not taken.
When insects stick to the paint surface
and decompose, corrosive compounds
form. These can erode the clear and color
base coat of the vehicle's paintwork if
they are not removed.
Here are some examples of possible
damage, with tips on how to prevent
them.
Tree sap will harden and adhere
qEtching Caused by Acid Rain or
permanently to the paint finish. If you
scratch the sap off while it is hard, some
vehicle paint could come off with it.
Industrial Fallout
Occurrence
Prevention
Industrial pollutants and vehicle emissions
drift into the air and mix with rain or dew
to form acids. These acids can settle on a
vehicle's finish. As the water evaporates,
the acid becomes concentrated and can
damage the finish.
It is necessary to have your Mazda
washed and waxed to preserve its finish
according to the instructions in this
section. This should be done as soon as
possible.
And the longer the acid remains on the
surface, the greater the chance is for
damage.
Bird droppings can be removed with a
soft sponge and water. If you are traveling
and these are not available, a moistened
tissue may also take care of the problem.
The cleaned area should be waxed
according to the instructions in this
section.
Insects and tree sap are best removed with
a soft sponge and water or a commercially
available chemical cleaner.
Prevention
It is necessary to wash and wax your
vehicle to preserve its finish according to
the instructions in this section. These
steps should be taken immediately after
you suspect that acid rain has settled on
your vehicle's finish.
Another method is to cover the affected
area with dampened newspaper for one to
two hours. After removing the newspaper,
rinse off the loosened debris with water.
8-48
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page319
Wednesday, July 8 2009 11:30 AM
Black plate (319,1)
Maintenance and Care
Appearance Care
NOTE
l
qWater Marks
The paint chipping zone varies with the
speed of the vehicle. For example, when
traveling at 90 km/h (56 mph), the paint
chipping zone is 50 m (164 ft).
In low temperatures a vehicle's finish
hardens. This increases the chance of paint
chipping.
Chipped paint can lead to rust forming on
your Mazda. Before this happens, repair the
damage by using Mazda touch-up paint
according to the instructions in this section.
Failure to repair the affected area could
lead to serious rusting and expensive
repairs.
Occurrence
Rain, fog, dew, and even tap water can
contain harmful minerals such as salt and
lime. If moisture containing these
minerals settles on the vehicle and
evaporates, the minerals will concentrate
and harden to form white rings. The rings
can damage your vehicle's finish.
l
l
Prevention
It is necessary to wash and wax your
vehicle to preserve its finish according to
the instructions in this section. These
steps should be taken immediately after
you find water marks on your vehicle's
finish.
qPaint Chipping
Occurrence
Paint chipping occurs when gravel thrown
in the air by another vehicle's tires hits
your vehicle.
How to avoid paint chipping
Keeping a safe distance between you and
the vehicle ahead reduces the chances of
having your paint chipped by flying
gravel.
8-49
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page320
Wednesday, July 8 2009 11:30 AM
Black plate (320,1)
Maintenance and Care
Appearance Care
Scratches occur on the paint surface
when:
Exterior Care
l
The vehicle is washed without first
Follow all label and container directions
when using a chemical cleaner or polish.
Read all warnings and cautions.
rinsing off dirt and other foreign
matter.
The vehicle is washed with a rough,
l
dry, or dirty cloth.
The vehicle is washed at a car wash
that uses brushes that are dirty or too
stiff.
Cleansers or wax containing abrasives
qMaintaining the Finish
l
Washing
l
CAUTION
are used.
When the wiper lever is in the AUTO
position and the ignition switch is in
the ON position, the wipers may
move automatically in the following
cases:
NOTE
l
Mazda is not responsible for scratches
caused by automatic car washes or
improper washing.
Ø If the windshield above the rain
sensor is touched.
l
Scratches are more noticeable on vehicles
with darker paint finishes.
Ø If the windshield above the rain
sensor is wiped with a cloth.
Ø If the windshield is struck with a
hand or other object.
Ø If the rain sensor is struck with a
hand or other object from inside
the vehicle.
To minimize scratches on the vehicle's
paint finish:
l
Rinse off any dirt or other foreign
matter using lukewarm or cold water
before washing.
Use plenty of lukewarm or cold water
l
and a soft cloth when washing the
vehicle. Do not use a nylon cloth.
Rub gently when washing or drying the
Be careful not to pinch hands or
fingers as it may cause injury, or
damage the wipers. When washing
or servicing your Mazda, make sure
the wiper lever is in the OFF position.
l
vehicle.
l
Take your vehicle only to a car wash
that keeps its brushes well maintained.
Do not use abrasive cleansers or wax
that contain abrasives.
To help protect the finish from rust and
deterioration, wash your Mazda
thoroughly and frequently, at least once a
month, with lukewarm or cold water.
l
If the vehicle is washed improperly, the
paint surface could be scratched. Here are
some examples of how scratching could
occur.
8-50
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page321
Wednesday, July 8 2009 11:30 AM
Black plate (321,1)
Maintenance and Care
Appearance Care
WARNING
CAUTION
Dry wet brakes by driving very slowly
and applying the brakes lightly until
brake performance is normal:
Driving with wet brakes is
Ø Do not use steel wool, abrasive
cleaners, or strong detergents
containing highly alkaline or
caustic agents on chrome-plated
or anodized aluminum parts. This
may damage the protective
coating; also, cleaners and
dangerous. Increased stopping
distance or the vehicle pulling to one
side when braking could result in a
serious accident. Light braking will
indicate whether the brakes have
been affected.
detergents may discolor or
deteriorate the paint.
Ø To prevent damaging the antenna,
remove it before entering a car
wash facility or passing beneath a
low overhead clearance.
When using a high water pressure car
wash
High water temperature and high water
pressure car washers are available
depending on the type of car wash
machine. If the car washer nozzle is put
too close to the vehicle, the force of the
spray could damage or deform the
Pay special attention to removing salt,
dirt, mud, and other foreign material from
the underside of the fenders, and make
sure the drain holes in the lower edges of
the doors and rocker panels are clean.
molding, affect the sealability of parts,
and allow water to penetrate the interior.
Keep a sufficient space (30 cm or more)
between the nozzle and the vehicle. In
addition, do not spend too much time
spraying the same area of the vehicle, and
be very careful when spraying between
gaps in doors and around windows.
Insects, tar, tree sap, bird droppings,
industrial fallout, and similar deposits can
damage the finish if not removed
immediately. When prompt washing with
plain water is ineffective, use a mild soap
made for use on vehicles.
Thoroughly rinse off all soap with
lukewarm or cold water. Do not allow
soap to dry on the finish.
Waxing
Your vehicle needs to be waxed when
water no longer beads on the finish.
Always wash and dry the vehicle before
waxing it. In addition to the vehicle body,
wax the metal trim to maintain its luster.
After washing the vehicle, dry it with a
clean chamois to prevent water spots from
forming.
1. Use wax which contains no abrasives.
Waxes containing abrasive will remove
paint and could damage bright metal
parts.
2. Use a good grade of natural wax for
metallic, mica, and solid colors.
8-51
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page322
Wednesday, July 8 2009 11:30 AM
Black plate (322,1)
Maintenance and Care
Appearance Care
3. When waxing, coat evenly with the
sponge supplied or a soft cloth.
CAUTION
Don't use steel wool, abrasive
cleaners, or strong detergents
containing highly alkaline or caustic
agents on chrome-plated or anodized
aluminum parts. This may result in
damage to the protective coating and
cause discoloration or paint
4. Wipe off the wax with a soft cloth.
NOTE
A spot remover to remove oil, tar, and similar
materials will usually also take off the wax.
Rewax these areas even if the rest of the
vehicle does not need it.
deterioration.
qRepairing Damage to the Finish
qUnderbody Maintenance
Deep scratches or chips on the finish
should be repaired promptly. Exposed
metal quickly rusts and can lead to major
repairs.
Road chemicals and salt used for ice and
snow removal and solvents used for dust
control may collect on the underbody. If
not removed, they will speed up rusting
and deterioration of such underbody parts
as fuel lines, frame, floor pan, and exhaust
system, even though these parts may be
coated with anti-corrosive material.
CAUTION
If your Mazda is damaged and needs
metal parts repaired or replaced,
make sure the body shop applies
anti-corrosion materials to all parts,
both repaired and new. This will
prevent them from rusting.
Thoroughly flush the underbody and
wheel housings with lukewarm or cold
water at the end of each winter. Try also
to do this every month.
qBright-Metal Maintenance
Pay special attention to these areas
because they easily hide mud and dirt. It
will do more harm than good to wet
down the road grime without removing
it.
l
Use tar remover to remove road tar and
insects. Never do this with a knife or
similar tool.
To prevent corrosion on bright-metal
surfaces, apply wax or chrome
l
preservative and rub it to a high luster.
During cold weather or in coastal areas,
The lower edges of doors, rocker panels,
and frame members have drain holes that
should not be clogged. Water trapped
there will cause rusting.
l
cover bright-metal parts with a coating
of wax or preservative heavier than
usual. It would also help to coat them
with noncorrosive petroleum jelly or
some other protective compound.
8-52
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page323
Wednesday, July 8 2009 11:30 AM
Black plate (323,1)
Maintenance and Care
Appearance Care
qPlastic Part Maintenance
WARNING
When cleaning the plastic lenses of the
lights, do not use gasoline, kerosene,
rectified spirit, paint, thinner, highly
acidic detergents, or strongly alkaline
detergents. Otherwise, these chemical
agents can discolor or damage the
surfaces resulting in a significant loss in
functionality. If plastic parts become
inadvertently exposed to any of these
chemical agents, flush with water
immediately.
Dry wet brakes by driving very slowly
and applying the brakes lightly until
brake performance is normal:
Driving with wet brakes is
dangerous. Increased stopping
distance or the vehicle pulling to one
side when braking could result in a
serious accident. Light braking will
indicate whether the brakes have
been affected.
qAluminum Wheel Maintenance
A protective coating is provided over the
aluminum wheels. Special care is needed
to protect this coating.
NOTE
l
Do not use a wire brush or any abrasive
cleaner, polishing compound, or solvent on
aluminum wheels. They may damage the
coating.
l
Only use a mild soap or neutral detergent
and always use a sponge or soft cloth to
clean the wheels.
Rinse thoroughly with lukewarm or cold
water. Also, be sure to clean the wheels
after driving on dusty or salted roads. This
helps prevent corrosion.
l
Avoid washing your vehicle in an automatic
car wash that uses high-speed or hard
brushes.
l
If your aluminum wheels lose luster, wax
the wheels.
(With Tire Pressure Monitoring System)
Check special requirements for Tire Pressure
Monitoring System.
Refer to Tires and Wheels on page 5-30.
8-53
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page324
Wednesday, July 8 2009 11:30 AM
Black plate (324,1)
Maintenance and Care
Appearance Care
To keep the fabric looking clean and
fresh, take care of it. Otherwise its color
will be affected, it can be stained easily,
and its fire-resistance may be reduced.
Interior Care
qDashboard Precautions
Prevent caustic solutions such as perfume
and cosmetic oils from contacting the
dashboard. They'll damage and discolor it.
If these solutions get on the dashboard,
wipe them off immediately.
CAUTION
Use only recommended cleaners and
procedures. Others may affect
appearance and fire-resistance.
Piano black panelí
CAUTION
Do not use glazing agents.
The following parts are fitted with panels
that have been treated with a special
coating that resists scratching.
Glazing agents contain ingredients
which may cause discoloration,
wrinkling, cracks and peeling.
Center panel
When the panel needs to be cleaned, use a
soft cloth to wipe off dirt from the surface.
qCleaning the Upholstery and
Interior Trim
NOTE
Scratches or nicks on the panels resulting from
the use of a hard brush or cloth may not be
repairable.
Vinyl
Remove dust and loose dirt from vinyl
with a whisk broom or vacuum cleaner.
Clean vinyl with a leather-and-vinyl
cleaner.
qCleaning the Lap/Shoulder Belt
Webbing
Leatherí
Clean the webbing with a mild soap
solution recommended for upholstery or
carpets. Follow instructions. Don't bleach
or dye the webbing; this may weaken it.
Real leather is not uniform and may have
scars, scratches, and wrinkles. Clean it
with a leather cleaner or mild soap.
Wipe it with a damp soft cloth; then dry
and buff it with a dry soft cloth.
After cleaning the belts, thoroughly dry
the belt webbing and make sure there is
no remaining moisture before retracting
them.
Fabric
Remove dust and loose dirt from fabric
with a whisk broom or vacuum cleaner.
Clean it with a mild soap solution good
for upholstery and carpets. Remove fresh
spots immediately with a fabric spot
cleaner.
WARNING
Have an Authorized Mazda Dealer
replace damaged seat belts
immediately:
Using damaged seat belts is
dangerous. In a collision, damaged
belts cannot provide adequate
protection.
8-54
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page325
Wednesday, July 8 2009 11:30 AM
Black plate (325,1)
Maintenance and Care
Appearance Care
qCleaning the Window Interiors
If the windows become covered with an
oily, greasy, or waxy film, clean them
with glass cleaner. Follow the directions
on the container.
CAUTION
Don't scrape or scratch the inside of
the rear window. You may damage
the rear window defroster grid.
8-55
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page326
Wednesday, July 8 2009 11:30 AM
Black plate (326,1)
8-56
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page328
Wednesday, July 8 2009 11:30 AM
Black plate (328,1)
Customer Information
Customer Assistance
Customer Assistance (U.S.A.)
Your complete and permanent satisfaction is our business. We are here to serve you. All
Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle
in top condition.
If you have any questions or recommendations for improvement regarding the service of
your Mazda vehicle or servicing by Mazda Dealer personnel, we recommend that you take
the following steps:
NOTE
If it becomes necessary to have the components or wiring system for the supplementary restraint
system modified to accommodate a person with certain medical conditions in accordance with a
certified physician, contact an Authorized Mazda Dealer.
qSTEP 1: Contact Your Mazda Dealer
Discuss the matter with an Authorized Mazda Dealer. This is the quickest and best way to
address the issue.
l
If your concern has not been resolved by the CUSTOMER RELATIONS, SALES,
SERVICE, or PARTS MANAGER, then please contact the GENERAL MANAGER of
the dealership or the OWNER.
If it becomes necessary to have the components or wiring system for the supplementary
l
restraint system modified to accommodate a person with certain medical conditions in
accordance with a certified physician, go to STEP2.
qSTEP 2: Contact Mazda North American Operations
If for any reason you feel the need for further assistance after contacting your dealership
management and it becomes necessary to have the components or wiring system for the
supplementary restraint system modified to accommodate a person with certain medical
conditions in accordance with a certified physician, you can reach Mazda North American
Operations by one of the following ways.
Log on: at www.mazdaUSA.com
Answers to many questions, including how to locate or contact a local Mazda dealership in
the U.S., can be found here.
E-mail: click on “Contact Us” located on the “Inside Mazda” tab, or at the bottom of the
page at www.mazdaUSA.com
By phone at: 1 (800) 222-5500
9-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page329
Wednesday, July 8 2009 11:30 AM
Black plate (329,1)
Customer Information
Customer Assistance
By letter at:
Attn: Customer Assistance
Mazda North American Operations
7755 Irvine Center Drive
Irvine, CA 92618-2922
P.O. Box 19734
Irvine, CA 92623-9734
In order to serve you efficiently and effectively, please help us by providing the following
information:
1. Your name, address, and telephone number
2. Year and model of vehicle
3. Vehicle Identification Number (17 digits, noted on your registration or title or located on
the upper driver's side corner of the dash)
4. Purchase date and current mileage
5. Your dealer's name and location
6. Your question(s)
If you live outside the U.S.A., please contact your nearest Mazda Distributor.
qSTEP 3: Contact Better Business Bureau (BBB)
Mazda North American Operations realizes that mutual agreement on some issues may not
be possible. As a final step to ensure that your concerns are being fairly considered, Mazda
North American Operations has agreed to participate in a dispute settlement program
administered by the Better Business Bureau (BBB) system, at no cost to you the consumer.
BBB AUTO LINE works with consumers and the manufacturer in an attempt to reach a
mutually acceptable resolution of any warranty related concerns. If the BBB is not able to
facilitate a settlement they will provide an informal hearing before an arbitrator.
You are required to resort to BBB AUTO LINE before exercising rights or seeking
remedies under the Federal Magnuson-Moss Warranty Act, 15 U.S.C. § 2301 et seq. To the
extent permitted by the applicable state “Lemon Law”, you are also required to resort to
BBB AUTO LINE before exercising any rights or seeking remedies under the “Lemon
Law”. If you choose to seek remedies that are not created by the Magnuson-Moss Warranty
Act or the applicable state “Lemon Law”, you are not required to first use BBB AUTO
LINE.
9-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page330
Wednesday, July 8 2009 11:30 AM
Black plate (330,1)
Customer Information
Customer Assistance
The whole process normally takes 40 days or less. The arbitration decision is not binding
on you or Mazda else you accept the decision. For more information about BBB AUTO
LINE, including current eligibility standards, please call 1-800-955-5100 or visit the BBB
website at www.lemonlaw.bbb.org.
Being truly committed to customer satisfaction is more than a phrase with Mazda. We hope
to satisfy every customer directly, but if there is ever a question about our decision, Mazda
believes in providing a fast, fair and free method such as the BBB AUTO LINE to ensure
Mazda delivers on our commitment to do the right thing for our customers!
qCalifornia Customers
1. Mazda North American Operations participates in BBB AUTO LINE, a mediation/
arbitration program administered by the Council of Better Business Bureaus [4200
Wilson Boulevard, Arlington, Virginia 22203] through local Better Business Bureaus.
BBB AUTO LINE and Mazda have been certified by the Arbitration Certification
Program of the California Department of Consumer Affairs.
2. If you have a problem arising under a Mazda written warranty, we encourage you to
bring it to our attention. If we are unable to resolve it, you may file a claim with BBB
AUTO LINE. Claims must be filed with BBB AUTO LINE within six (6) months after
the expiration of the warranty.
3. To file a claim with BBB AUTO LINE, call 1-800-955-5100. There is no charge for the
call.
4. In order to file a claim with BBB AUTO LINE, you will have to provide your name and
address, the brand name and vehicle identification number (VIN) of your vehicle, and a
statement of the nature of your problem or complaint. You will also be asked to provide:
the approximate date of your acquisition of the vehicle, the vehicle's current mileage, the
approximate date and mileage at the time any problem(s) were first brought to the
attention of Mazda or one of our dealers, and a statement of the relief you are seeking.
5. BBB AUTO LINE staff may try to help resolve your dispute through mediation. If
mediation is not successful, or if you do not wish to participate in mediation, claims
within the program's jurisdiction may be presented to an arbitrator at an informal
hearing. The arbitrator's decision should ordinarily be issued within 40 days from the
time your complaint is filed; there may be a delay of 7 days if you did not first contact
Mazda about your problem, or a delay of up to 30 days if the arbitrator requests an
inspection/report by an impartial technical expert or further investigation and report by
BBB AUTO LINE.
9-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page331
Wednesday, July 8 2009 11:30 AM
Black plate (331,1)
Customer Information
Customer Assistance
6. You are required to use BBB AUTO LINE before asserting in court any rights or
remedies conferred by California Civil Code Section 1793.22. You are also required to
use BBB AUTO LINE before exercising rights or seeking remedies created by Title I of
the Magnuson-Moss Warranty Act, 15 U.S.C. sec. 2301 et seq. If you choose to seek
redress by pursuing rights and remedies not created by California Civil Code Section
1793.22 or Title I of the Magnuson-Moss Warranty Act, resort to BBB AUTO LINE is
not required by those statutes.
7. California Civil Code Section 1793.2 (d) requires that, if Mazda or its representative is
unable to repair a new motor vehicle to conform to the vehicle's applicable express
warranty after a reasonable number of attempts, Mazda may be required to replace or
repurchase the vehicle. California Civil Code Section 1793.22 (b) creates a presumption
that Mazda has had a reasonable number of attempts to conform the vehicle to its
applicable express warranties if, within 18 months from delivery to the buyer or 18,000
miles on the vehicle's odometer, whichever occurs first, one or more of the following
occurs:
l
The same nonconformity [a failure to conform to the written warranty that
substantially impairs the use, value or safety of the vehicle] results in a condition that
is likely to cause death or serious bodily injury if the vehicle is driven AND the
nonconformity has been subject to repair two or more times by Mazda or its agents
AND the buyer or lessee has directly notified Mazda of the need for the repair of the
nonconformity; OR
l
The same nonconformity has been subject to repair 4 or more times by Mazda or its
agents AND the buyer has notified Mazda of the need for the repair of the
nonconformity; OR
l
The vehicle is out of service by reason of repair of nonconformities by Mazda or its
agents for a cumulative total of more than 30 calendar days after delivery of the
vehicle to the buyer.
NOTICE TO Mazda AS REQUIRED ABOVE SHALL BE SENT TO THE
FOLLOWING ADDRESS:
Mazda North American Operations
7755 Irvine Center Drive
Irvine, CA 92618
ATTN: Customer Mediation
8. The following remedies may be sought in BBB AUTO LINE: repairs, reimbursement
for money paid to repair a vehicle or other expenses incurred as result of a vehicle
nonconformity, repurchase or replacement of your vehicle, and compensation for
damages and remedies available under Mazda's written warranty or applicable law.
9. The following remedies may not be sought in BBB AUTO LINE: punitive or multiple
damages, attorneys' fees, or consequential damages other than as provided in California
Civil Code Section 1794 (a) and (b).
9-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page332
Wednesday, July 8 2009 11:30 AM
Black plate (332,1)
Customer Information
Customer Assistance
10. You may reject the decision issued by a BBB AUTO LINE arbitrator. If you reject the
decision, you will be free to pursue further legal action. The arbitrator's decision and
any findings will be admissible in a court action.
11. If you accept the arbitrator's decision, Mazda will be bound by the decision, and will
comply with the decision within a reasonable time not to exceed 30 days after we
receive notice of your acceptance of the decision.
12. Please call BBB AUTO LINE at 1-800-955-5100 for further details about the program.
9-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page333
Wednesday, July 8 2009 11:30 AM
Black plate (333,1)
Customer Information
Customer Assistance
Customer Assistance (Canada)
qSatisfaction Review Process
Your complete and permanent satisfaction is of primary concern to Mazda. All Authorized
Mazda Dealers have both the knowledge and tools to keep your Mazda in top condition. In
our experience, any questions, problems, or complaints regarding the operation of your
Mazda or any other general service transactions are most effectively resolved by your
dealer. If the cause of your dissatisfaction cannot adequately be addressed by normal
dealership procedures, we recommend that you take the following steps:
qSTEP 1: Contact the Mazda Dealer
Discuss the matter with a member of dealership management. If the Service Manager has
already reviewed your concerns, contact the owner of the dealership or its General
Manager.
qSTEP 2: Contact the Mazda Regional Office
If you feel that you still require assistance, ask the dealer Service Manager to arrange for
you to meet the local Mazda Service Representative. If more expedient, contact Mazda
Canada Inc.Regional Office nearest you for such arrangements. Regional Office address
and phone numbers are shown (page 9-9).
qSTEP 3: Contact the Mazda Customer Relations Department
If still not substantially satisfied, contact the Customer Relations Department, Mazda
Canada Inc., 55 Vogell Road, Richmond Hill, Ontario, L4B 3K5 Canada TEL: 1 (800)
263-4680.
Provide the Department with the following information:
1. Your name, address and telephone number
2. Year and model of vehicle
3. Vehicle Identification Number (VIN). Refer to the “Vehicle Identification Labels” page
of section 10 of this manual for the location of the VIN.
4. Purchase date
5. Present odometer reading
6. Your dealer's name and location
7. The nature of your problem and/or cause of dissatisfaction
The Department, in cooperation with the local Mazda Service Representative, will review
the case to determine if everything possible has been done to ensure your satisfaction.
9-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page334
Wednesday, July 8 2009 11:30 AM
Black plate (334,1)
Customer Information
Customer Assistance
Please recognize that the resolution of service problems in most cases requires the use of
your Mazda dealer's service facilities, personnel and equipment. We urge you to follow the
above three steps in sequence for most effective results.
qMediation/Arbitration Program
Occasionally a customer concern cannot be resolved through Mazda's Customer
Satisfaction Program. If after exhausting the procedures in this manual your concern is still
not resolved, you have another option.
Mazda Canada Inc. participates in an arbitration program administered by the
Canadian Motor Vehicle Arbitration Plan (CAMVAP). CAMVAP will advise you about
how your concern may be reviewed and resolved by an independent third party through
binding arbitration.
Your complete satisfaction is the goal of Mazda Canada Inc. and our dealers.
Mazda's participation in CAMVAP makes a valuable contribution to our achieving that
goal. There is no charge for using CAMVAP. CAMVAP results are fast, fair and final as the
award is binding on both you and Mazda Canada Inc.
qCanadian Motor Vehicle Arbitration Plan (CAMVAP)
If a specific item of concern arises, where a solution cannot be reached between an owner,
Mazda, and/or one of it's dealers (that all parties cannot agree upon), the owner may wish
to use the services offered by the Canadian Motor Vehicle Arbitration Plan (CAMVAP).
CAMVAP uses the services of Provincial Administrators to assist consumers in scheduling
and preparing for their arbitration hearings. However, before you can proceed with
CAMVAP you must follow your Mazda dispute resolution process as outlined previously.
9-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page335
Wednesday, July 8 2009 11:30 AM
Black plate (335,1)
Customer Information
Customer Assistance
CAMVAP is fully implemented in all provinces and territories.
Consumers wishing to obtain further information about the Program should contact the
Provincial Administrator at 1 (800) 207-0685, or by contacting the
Canadian Motor Vehicle Arbitration Plan Office at:
Canadian Motor Vehicle Arbitration Plan
235 Yorkland Boulevard, suite 300
North York, Ontario
M2J 4Y8
http://camvap.ca
Provincial Administrators may be reached locally as listed below:
Province/Territory
British Columbia & Yukon Territories
Alberta & Northwest Territories
Saskatchewan
CAMVAP Number
1 (800) 207-0685
1 (800) 207-0685
1 (800) 207-0685
1 (800) 207-0685
1 (800) 207-0685
1 (800) 207-0685
1 (800) 207-0685
Manitoba
Ontario
Atlantic Canada
Quebec
qRegional Offices
REGIONAL OFFICES
AREAS COVERED
MAZDA CANADA INC.
WESTERN REGION
8171 ACKROYD ROAD
SUITE 2000
ALBERTA,
BRITISH COLUMBIA,
MANITOBA,
RICHMOND B.C.
V6X 3K1
SASKATCHEWAN,
YUKON
(604) 303-5670
MAZDA CANADA INC.
CENTRAL/ATLANTIC REGION
55 VOGELL ROAD,
ONTARIO
RICHMOND HILL,
ONTARIO, L4B 3K5
(905) 787-7000
MAZDA CANADA INC.
QUEBEC REGION
6111 ROUTE TRANS
CANADIENNE
QUEBEC,
NEW BRUNSWICK,
NOVA SCOTIA,
POINTE CLAIRE, QUEBEC
H9R 5A5
PRINCE EDWARD ISLAND,
NEWFOUNDLAND
(514) 694-6390
9-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page336
Wednesday, July 8 2009 11:30 AM
Black plate (336,1)
Customer Information
Customer Assistance
Customer Assistance (Puerto Rico)
Your complete and permanent satisfaction is our business. That is why all Authorized
Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top
condition.
If you have any questions or recommendations for improvement regarding the service of
your Mazda vehicle or servicing by Mazda Dealer personnel, we recommend that you take
the following steps:
qSTEP 1
Discuss the matter with an Authorized Mazda Dealer. This is the quickest and best way to
address the issue. If your concern has not been resolved by the CUSTOMER RELATIONS,
SALES, SERVICE, or PARTS MANAGER, then please contact the GENERAL
MANAGER of the dealership or the OWNER.
qSTEP 2
If, after following STEP 1, you feel the need for further assistance, please contact your
area's Mazda representative (Indicated on the next page).
Please help us by providing the following information:
1. Your name, address, and telephone number
2. Year and model of vehicle
3. Vehicle Identification Number (17 digits, noted on your registration or title or located on
the upper driver's side corner of the dash)
4. Purchase date and current mileage
5. Your dealer's name and location
6. Your question(s)
9-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page337
Wednesday, July 8 2009 11:30 AM
Black plate (337,1)
Customer Information
Customer Assistance
Customer Assistance (Mexico)
Your complete and permanent satisfaction is our business. We are here to serve you. All
Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle
in top condition.
If you have any questions or recommendations for improvement regarding the service of
your Mazda vehicle or servicing by Mazda Dealer personnel, we recommend that you take
the following steps:
qSTEP 1: Contact Your Mazda Dealer
Discuss the matter with an Authorized Mazda Dealer. This is the quickest and best way to
address the issue.
l
If your concern has not been resolved by the CUSTOMER RELATIONS, SALES,
SERVICE, or PARTS MANAGER, then please contact the GENERAL MANAGER of
the dealership or the OWNER.
If it becomes necessary to have the components or wiring system for the supplementary
l
restraint system modified to accommodate a person with certain medical conditions in
accordance with a certified physician, go to STEP2.
qSTEP 2: Contact Mazda Motor de Mexico
If for any reason you feel the need for further assistance after contacting your dealership
management and it becomes necessary to have the components or wiring system for the
supplementary restraint system modified to accommodate a person with certain medical
conditions in accordance with a certified physician, you can reach Mazda Motor de Mexico
by one of the following ways.
Log on: at www.MazdaMexico.com.mx
Answers to many questions, including how to locate or contact a local Mazda dealership in
Mexico, can be found here.
E-mail: click on “Contactanos” at the top of the page at www.MazdaMexico.com.mx
By phone at: 1 (866) 315 0220
By letter at:
Attn: Customer Assistance
Mazda North American Operations
7755 Irvine Center Drive
Irvine, CA 92618-2922
P.O. Box 19734
Irvine, CA 92623-9734
9-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page338
Wednesday, July 8 2009 11:30 AM
Black plate (338,1)
Customer Information
Customer Assistance
In order to serve you efficiently and effectively, please help us by providing the following
information:
1. Your name, address, and telephone number
2. Year and model of vehicle
3. Vehicle Identification Number (17 digits, noted on your registration or title or located on
the upper driver's side corner of the dash)
4. Purchase date and current mileage
5. Your dealer's name and location
6. Your question(s)
9-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page339
Wednesday, July 8 2009 11:30 AM
Black plate (339,1)
Customer Information
Mazda Importer/Distributors
Importer/Distributor
Distributor in Each Area
qU.S.A.
qCANADA
Mazda North American Operations
7755 Irvine Center Drive
Mazda Canada Inc.
55 Vogell Road, Richmond Hill,
Irvine, CA 92618-2922 U.S.A.
P.O. Box 19734
Irvine, CA 92623-9734 U.S.A.
TEL: 1 (800) 222-5500 (in U.S.A.)
(949) 727-1990 (outside U.S.A.)
Ontario, L4B 3K5 Canada
TEL: 1 (800) 263-4680 (in Canada)
(905) 787-7000 (outside Canada)
q
PUERTO RICO/U.S. Virgin Island
Plaza Motors Corp. (Mazda de Puerto
Rico)
P.O. Box 362722, San Juan, Puerto Rico
00936-2722
TEL: (787) 641-9300
qMEXICO
Mazda Motor de Mexico
Circuito Guillermo Gonzalez Camarena N
1500 Col. Centro de Ciudad Santa Fe.
01210, Mexico, D.F.
TEL: Center of Attention to Clients:
01 (800) 016 2932. in Mexico
qGUAM
Triple J Motors
157 South Marine Drive, Tamuning,
GUAM 96911 USA
P.O. Box 6066 Tamuning, Guam 96931
TEL: (671) 649-6555
qSAIPAN
Pacific International Marianas, Inc.
(d.b.a. Midway Motors)
P.O. Box 887 Saipan, MP 96950
TEL: (670) 234-7524
9-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page340
Wednesday, July 8 2009 11:30 AM
Black plate (340,1)
Customer Information
Mazda Importer/Distributors
Triple J Saipan, Inc.
(d.b.a. Triple J Motors)
P.O. Box 500487 Saipan, MP 96950-0487
TEL: (670) 234-7133/3051
qAMERICAN SAMOA
Polynesia Motors, Inc.
P.O. Box 1120, Pago Pago, American
Samoa 96799
TEL: (684) 699-9347
9-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page341
Wednesday, July 8 2009 11:30 AM
Black plate (341,1)
Customer Information
Warranty
Warranties for Your Mazda
l
l
l
l
l
New Vehicle Limited Warranty
Distributor Major Component Limited Warranty (Canada only)
Safety Restraint System Limited Warranty
Anti-perforation Limited Warranty
Federal Emission Control Warranty (U.S.A. only)
l
Emission Defect Warranty
Emission Performance Warranty
l
l
l
l
l
California Emission Control Warranty (U.S.A. only)
Emission Control Warranty (Canada only)
Replacement Parts and Accessories Limited Warranty
Tire Warranty
NOTE
Detailed warranty information is provided with your Mazda.
9-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page342
Wednesday, July 8 2009 11:30 AM
Black plate (342,1)
Customer Information
Warranty
Outside the United States
Government regulations in the United States require that automobiles meet specific
emission regulations and safety standards. Therefore, vehicles built for use in the United
States may differ from those sold in other countries.
The differences may make it difficult or even impossible for your vehicle to receive
satisfactory servicing in other countries. We strongly recommend that you NOT take your
Mazda outside the United States. However, in the event that you are moving to Canada
permanently, Mazda vehicles built for use in the United States could be eligible for
exportation to Canada with specific vehicle modifications to comply with the Canadian
Motor Vehicle Safety requirements (CMVSS).
NOTE
The above is applicable for a permanent import/export situation and not related to travelers on
vacation.
You may have the following problems if you do take your vehicle outside of the United
States:
l
Recommended fuel may be unavailable. Any kind of leaded fuel or low-octane fuel will
affect vehicle performance and damage the emission controls and engine.
Proper repair facilities, tools, testing equipment, and replacement parts may not be
l
available.
Please refer to your Manufacturer's Warranty Booklet for more information.
9-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page343
Wednesday, July 8 2009 11:30 AM
Black plate (343,1)
Customer Information
Warranty
Outside Canada
Government regulations in Canada require that automobiles meet specific emission
regulations and safety regulations. Therefore, vehicles built for use in Canada may differ
from those sold in other countries.
The differences may make it difficult or even impossible for your vehicle to receive
satisfactory servicing in other countries. We strongly recommend that you NOT take your
Mazda outside Canada. However, in the event that you are moving to the United States
permanently, Mazda vehicles built for use in Canada could be eligible for exportation to the
United States with specific vehicle modifications to comply with the United States Federal
Motor Vehicle Safety Standards (FMVSS).
NOTE
The above is applicable for a permanent import/export situation and not related to travelers on
vacation.
You may have the following problems if you do take your vehicle outside of Canada:
l
Recommended fuel may be unavailable. Any kind of leaded fuel or low-octane fuel will
affect vehicle performance and damage the emission controls and engine.
Proper repair facilities, tools, testing equipment, and replacement parts may not be
l
available.
Please refer to your Manufacturer's Warranty Booklet for more information.
9-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page344
Wednesday, July 8 2009 11:30 AM
Black plate (344,1)
Customer Information
Warranty
Registering Your Vehicle in A Foreign Country (Except
United States and Canada)
Government regulations in your country could require that automobiles meet specific
emission and safety standards.
Vehicles built for your country may differ from those built for other countries. In addition
to registration problems, satisfactory service may be difficult or even impossible in another
country.
The fuel specified for your vehicle may be unavailable.
Parts, servicing techniques, and tools necessary to maintain and repair your vehicle may be
unavailable.
There might not be an Authorized Mazda Dealer in the country you plan to take your
vehicle.
The Mazda warranty is valid only in certain countries.
9-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page345
Wednesday, July 8 2009 11:30 AM
Black plate (345,1)
Customer Information
Warranty
Add-On Non-Genuine Parts and Accessories
Non-genuine parts and accessories for Mazda vehicles can be found in stores.
These may fit your vehicle, but they are not approved by Mazda for use with Mazda
vehicles. When you install non-genuine parts or accessories, they could affect your
vehicle's performance or safety systems; the Mazda warranty doesn't cover this. Before you
install any non-genuine parts or accessories, consult an Authorized Mazda Dealer.
WARNING
Always consult an Authorized Mazda Dealer before you install non-genuine parts or
accessories:
Installation of non-genuine parts or accessories is dangerous. Improperly designed
parts or accessories could seriously affect your vehicle's performance or safety
systems. This could cause you to have an accident or increase your chances of
injuries in an accident.
Be very careful in choosing and installing add-on electrical equipment, such as
mobile telephones, two-way radios, stereo systems, and car alarm systems:
Incorrectly choosing or installing improper add-on equipment or choosing an
improper installer is dangerous. Essential systems could be damaged, causing engine
stalling, air-bag (SRS) activation, ABS inactivation, or a fire in the vehicle.
Mazda assumes no responsibility for death, injury, or expenses that may result from the
installation of add-on non-genuine parts or accessories.
9-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page346
Wednesday, July 8 2009 11:30 AM
Black plate (346,1)
Customer Information
Cell Phones
Cell Phones Warning
WARNING
Please comply with the legal regulations concerning the use of communication
equipment in vehicles in your State or Province:
Use of any electrical devices such as cell phones, computers, portable radios, vehicle
navigation or other devices by the driver while the vehicle is moving is dangerous.
Dialing a number on a cell phone while driving also ties-up the driver's hands. Use of
these devices will cause the driver to be distracted and could lead to a serious
accident. If a passenger is unable to use the device, pull off the right-of-way to a safe
area before use. If use of a cell phone is necessary despite this warning, use a hands-
free system to at least leave the hands free to drive the vehicle. Never use a cell
phone or other electrical devices while the vehicle is moving and, instead,
concentrate on the full-time job of driving.
9-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page347
Wednesday, July 8 2009 11:30 AM
Black plate (347,1)
Customer Information
Uniform Tire Quality Grading System (UTQGS)
Uniform Tire Quality Grading System (UTQGS)
This information relates to the tire grading system developed by the U.S. National
Highway Traffic Safety Administration for grading tires by tread wear, traction, and
temperature performance.
qTread Wear
The tread wear grade is a comparative rating based on the wear rate of the tire when tested
under controlled conditions on a specified government test course.
For example, a tire graded 150 would wear one-and-a-half times as well on the government
course as a tire graded 100.
The relative performance of tires depends upon the actual conditions of their use, however,
and may depart significantly from the norm because of variations in driving habits, service
practices and differences in road characteristics and climate.
qTraction-AA, A, B, C
The traction grades, from highest to lowest, are AA, A, B, and C. These grades represent
the tire's ability to stop on wet pavement as measured under controlled conditions on
specified government test surfaces of asphalt and concrete. A tire marked C may have poor
traction performance.
WARNING
The traction grade assigned to this tire is based on braking (straight ahead) traction
tests and does not include acceleration cornering (turning), hydroplaning, or peak
traction characteristics.
qTemperature-A, B, C
The temperature grades A (the highest), B, and C, represent the tire's resistance to the
generation of heat and its ability to dissipate heat when tested under controlled conditions
on a specified indoor laboratory test wheel.
Sustained high temperature can cause the material of the tire to degenerate and reduce tire
life, and excessive temperatures can lead to sudden tire failure.
Grade C corresponds to a level of performance which all passenger vehicle tires must meet
under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A represent
higher levels of performance on the laboratory test wheel than the minimum required by
law.
9-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page348
Wednesday, July 8 2009 11:30 AM
Black plate (348,1)
Customer Information
Uniform Tire Quality Grading System (UTQGS)
WARNING
Keep your vehicle's tires properly inflated and not overloaded:
Driving with improperly inflated or overloaded tires is dangerous. Excessive speed,
underinflation, or excessive loading, either separately or in combination, can cause
heat buildup and possible tire failure. The temperature grade for this tire is
established for a tire that is properly inflated and not overloaded.
These grades will be added to the sidewalls of passenger vehicle tires over the next several
years according to a schedule established by the NHTSA and the tire manufacturers.
The grade of tires available as standard or optional equipment on Mazda vehicles may vary
with respect to grade.
ALL PASSENGER VEHICLE TIRES MUST CONFORM TO THESE GRADES AND
TO ALL OTHER FEDERAL TIRE-SAFETY REQUIREMENTS.
qUniform Tire Quality Grading
Quality grades can be found where applicable on the tire sidewall between tread shoulder
and maximum section width.
For example:
Treadwear 200 Traction AA Temperature A
UTQGS MARK (example)
TREADWEAR 200 TRACTION AA
TEMPERATURE A
9-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page349
Wednesday, July 8 2009 11:30 AM
Black plate (349,1)
Customer Information
Tire Information (U.S.A.)
Tire Labeling
Federal law requires tire manufacturers to place standardized information on the sidewall of
all tires. This information identifies and describes the fundamental characteristics of the tire
and also provides a tire identification number for safety standard certification and in case of
a recall.
qInformation on Passenger Vehicle Tires
Please refer to the diagram below.
1. TIN: U.S. DOT tire identification number
2. Passenger car tire
3. Nominal width of tire in millimeters
4. Ratio of height to width (aspect ratio)
5. Radial
6. Rim diameter code
7. Load index & speed symbol
8. Severe snow conditions
9. Tire ply composition and materials used
10. Max. load rating
9-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page350
Wednesday, July 8 2009 11:30 AM
Black plate (350,1)
Customer Information
Tire Information (U.S.A.)
11. Tread wear, traction and temperature grades
12. Max. permissible inflation pressure
13. SAFETY WARNING
P215/65R15 95H is an example of a tire size and load index rating. Here is an explanation
of the various components of that tire size and load index rating. Note that the tire size and
load index rating may be different from the example.
P
Indicates a tire that may be installed on cars, SUVs, minivans and light trucks as designated
by the Tire and Rim Association (T&RA).
NOTE
If your tire size does not begin with a letter this may mean it is designated by either ETRTO
(European Tire and Rim Technical Organization) or JATMA (Japan Tire Manufacturing Association).
215
“215” is the nominal width of the tire in millimeters. This three-digit number gives the
width in millimeters of the tire from sidewall edge to sidewall edge. In general, the larger
the number, the wider the tire.
65
“65” is the aspect ratio. This two-digit number indicates the tire's ratio of height to width.
R
“R” is the tire construction symbol. R indicates “Radial ply construction”.
15
“15” is the wheel rim diameter in inches.
95
“95” is the Load Index. This two-or three-digit number indicates how much weight each
tire can support.
9-24
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page351
Wednesday, July 8 2009 11:30 AM
Black plate (351,1)
Customer Information
Tire Information (U.S.A.)
H
“H” is the speed rating. The speed rating denotes the maximum speed for which the use of
the tire is rated.
Letter Rating
Speed Rating
99 mph
Q
R
S
106 mph
112 mph
118 mph
124 mph
130 mph
149 mph
168* mph
186* mph
T
U
H
V
W
Y
* For tires with a maximum speed capability over 149 mph, tire manufacturers sometimes use the letters ZR. For
tires with a maximum speed capability over 186 mph, tire manufacturers always use the letters ZR.
M+S or M/S: Mud and Snow
AT: All Terrain.
AS: All Season. The “M+S” or “M/S” indicates that the tire has some functional use in
mud and snow.
U.S. DOT Tire Identification Number (TIN)
This begins with the letters “DOT” which indicates the tire meets all federal standards. The
next two numbers or letters are the plant code where it was manufactured, and the last four
numbers represent the week and year the tire was manufactured. For example, the numbers
457 means the 45st week of 1997. After 2000 the numbers go to four digits. For example,
the number 2102 means the 21th week of 2002. The other numbers are marketing codes
used at the manufacturer's discretion. This information is used to contact consumers if a tire
defect requires a recall.
Tire Ply Composition and Materials Used
The number of plies indicates the number of layers of rubber-coated fabric in the tire. In
general, the greater the number of plies, the more weight a tire can support. Tire
manufacturers also must indicate the tire materials, which include steel, nylon, polyester,
and other.
Maximum Load Rating
This number indicates the maximum load in kilograms and pounds that can be carried by
the tire.
Maximum Permissible Inflation Pressure
This number is the greatest amount of air pressure that should ever be put in the tire under
normal driving conditions.
9-25
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page352
Wednesday, July 8 2009 11:30 AM
Black plate (352,1)
Customer Information
Tire Information (U.S.A.)
Tread Wear, Traction and Temperature Grades
Tread wear: The tread wear grade is a comparative rating based on the wear rate of the tire
when tested under controlled conditions on a specified government test course. For
example, a tire graded 150 would wear one and one-half (1 1/2) times as well on the
government course as a tire graded 100.
Traction: The traction grades, from highest to lowest are AA, A, B, and C. The grades
represent the tire's ability to stop on wet pavement as measured under controlled conditions
on specified government test surfaces of asphalt and concrete. A tire marked C may have
poor traction performance.
Temperature: The temperature grades are A (the highest), B and C, representing the tire's
resistance to the generation of heat and its ability to dissipate heat when tested under
controlled conditions on a specified indoor laboratory test wheel.
Snow Tires
In some heavy snow areas, local governments may require true snow tires, those with very
deeply cut tread. These tires should only be used in pairs or placed on all four wheels.
Make sure you purchase snow tires that are the same size and construction type as the other
tires on your vehicle.
SAFETY WARNING
The following safety warning appears on the tire's sidewall.
SERIOUS INJURY MAY RESULT FROM:
l
EXPLOSION OF TIRE/RIM ASSEMBLY DUE TO IMPROPER MOUNTING-
MATCH TIRE DIAMETER TO RIM DIAMETER; NEVER EXCEED 40 psi (275 kPa)
TO SEAT BEADS-ONLY SPECIALLY TRAINED PERSONS SHOULD MOUNT
TIRES.
l
TIRE FAILURE DUE TO UNDER-INFLATION/OVERLOADING/DAMAGE-
FOLLOW OWNER'S MANUAL AND PLACARD IN VEHICLE-FREQUENTLY
CHECK INFLATION PRESSURE AND INSPECT FOR DAMAGE.
9-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page353
Wednesday, July 8 2009 11:30 AM
Black plate (353,1)
Customer Information
Tire Information (U.S.A.)
qInformation on Temporary Tires
Please refer to the diagram below.
1. Temporary tires
2. Nominal width of tire in millimeters
3. Ratio of height to width (aspect ratio)
4. Diagonal
5. Rim diameter code
6. Load index&speed symbol
T115/70D 16 90M is an example of a tire size and load index rating. Here is an explanation
of the various components of that tire size and load index rating. Note that the tire size and
load index rating may be different from the example.
T
Indicates a tire that may be installed on cars, SUVs, minivans and light trucks as designated
by the Tire and Rim Association (T&RA).
115
“115” is the nominal width of the tire in millimeters. This three-digit number gives the
width in millimeters of the tire from sidewall edge to sidewall edge. In general, the larger
the number, the wider the tire.
9-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page354
Wednesday, July 8 2009 11:30 AM
Black plate (354,1)
Customer Information
Tire Information (U.S.A.)
70
“70” is the aspect ratio. This two-digit number indicates the tire's ratio of height to width.
D
“D” is the tire construction symbol. D indicates “diagonal ply construction”.
16
“16” is the wheel rim diameter in inches.
90
“90” is the Load Index. This two-or three-digit number indicates how much weight each
tire can support.
M
“M” is the speed rating. The speed rating denotes the maximum speed for which the use of
the tire is rated.
Letter Rating
Speed Rating
M
81 mph
9-28
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page355
Wednesday, July 8 2009 11:30 AM
Black plate (355,1)
Customer Information
Tire Information (U.S.A.)
Location of the Tire Label (Placard)
You will find the tire label containing tire inflation pressure by tire size and other important
information on the driver's side B-pillar or on the edge of the driver's door frame.
SAMPLE
qRecommended Tire Inflation Pressure
On the tire label you will find the recommended tire inflation pressure in both kPa and psi
for the tires installed as original equipment on the vehicle. It is very important that the
inflation pressure of the tires on your vehicle is maintained at the recommended pressure.
You should check the tire pressure regularly to insure that the proper inflation pressure is
maintained.
Refer to Tires on page 10-6.
NOTE
Tire pressures listed on the vehicle placard or tire information label indicate the recommended cold
tire inflation pressure, measured when the tires are cold, after the vehicle has been parked for at least
3 hours. As you drive, the temperature in the tire warms up, increasing the tire pressure.
9-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page356
Wednesday, July 8 2009 11:30 AM
Black plate (356,1)
Customer Information
Tire Information (U.S.A.)
WARNING
Always check the tire inflation pressures on a regular basis according to the
recommended tire inflation pressure on the tire label and in conjunction with the
information in this owner's manual:
Driving your vehicle with under-inflated tires is dangerous.
Under-inflation is the most common cause of failures in any kind of tire and may
result in severe cracking, tread separation or “blowout”, with unexpected loss of
vehicle control and increased risk of injury. Under-inflation increases sidewall flexing
and rolling resistance, resulting in heat buildup and internal damage to the tire. It
results in unnecessary tire stress, irregular wear, loss of control and accidents. A tire
can lose up to half of its air pressure and not appear to be flat!
It is impossible to determine whether or not tires are properly inflated just by looking
at them.
qChecking Tire Pressure
1. When you check the air pressure, make sure the tires are cold ―meaning they are not
hot from driving even a mile.
2. Remove the cap from the valve on one tire.
3. Firmly press a tire gauge onto the valve.
4. Add air to achieve recommended air pressure.
5. If you overfill the tire, release air by pushing on the metal stem in the center of the
valve. Then recheck the pressure with your tire gauge.
6. Replace the valve cap.
7. Repeat with each tire, including the spare.
NOTE
Some spare tires require higher inflation pressure.
8. Visually inspect the tires to make sure there are no nails or other objects embedded that
could poke a hole in the tire and cause an air leak.
9. Check the sidewalls to make sure there are no gouges, cuts, bulges, cracks or other
irregularities.
NOTE
Warm tires normally exceed recommended pressures. Don't release air from warm tires to adjust the
pressure.
Under-inflation can cause serious failures and accidents.
Over-inflation can produce a harsh ride and the greater possibility of damage from road hazards.
9-30
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page357
Wednesday, July 8 2009 11:30 AM
Black plate (357,1)
Customer Information
Tire Information (U.S.A.)
qGlossary of Terms
Tire Placard: A label indicating the OE tire sizes, recommended inflation pressure, and
the maximum weight the vehicle can carry.
Tire Identification Number (TIN): A number on the sidewall of each tire providing
information about the tire brand and manufacturing plant, tire size, and date of
manufacture.
Inflation Pressure: A measure of the amount of air in a tire.
kPa: Kilopascal, the metric unit for air pressure.
psi: Pounds per square inch, the English unit for air pressure.
B-pillar: The structural member at the side of the vehicle behind the front door.
Original Equipment (OE): Describes components originally equipped on the vehicle.
Vehicle Load Limit: The maximum value of the combination weight of occupants and
cargo.
Bead Area of the Tire: Area of the tire next to the rim.
Sidewall Area of the Tire: Area between the bead area and the tread.
Tread Area of the Tire: Area on the perimeter of the tire that contacts the road when it's
mounted on the vehicle.
Seating capacity means the total allowable number of vehicle occupants. Seating capacity
is described on the tire label.
Production options weight is the combination weight of installed regular production
options weighing over 2.3 kilograms in excess of the standard items which they replace,
and not previously considered in the curb weight or accessory weight, including heavy
duty brakes, ride levelers, roof rack, heavy duty battery, and special trim.
Rim is the metal support (wheel) for a tire or a tire and tube assembly upon which the tire
beads are seated.
9-31
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page358
Wednesday, July 8 2009 11:30 AM
Black plate (358,1)
Customer Information
Tire Information (U.S.A.)
Tire Maintenance
Improper or inadequate vehicle maintenance can cause tires to wear abnormally. Here are
some important maintenance points:
qTire Inflation Pressure
Inspect all tire pressure monthly (including the spare) when the tires are cold. Maintain
recommended pressures for the best ride, top handling, and minimum tire wear. Use the
pressures specified on the vehicle tire information placard or tire label for optimum service.
qTire Rotation
To equalize tread wear, rotate the tires every 12,000 km (7,500 miles) or sooner if irregular
wear develops. During rotation, inspect them for correct balance.
Forward
Do not include (TEMPORARY USE ONLY)
spare tire in rotation.
Inspect the tires for uneven wear and damage. Abnormal wear is usually caused by one or a
combination of the following:
l
Incorrect tire pressure
Improper wheel alignment
Out-of-balance wheel
Severe braking
l
l
l
for tightness.
9-32
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page359
Wednesday, July 8 2009 11:30 AM
Black plate (359,1)
Customer Information
Tire Information (U.S.A.)
CAUTION
Rotate unidirectional tires and radial tires that have an asymmetrical tread pattern
or studs only from front to rear, not from side to side. Tire performance will be
weakened if rotated from side to side.
(With limited-slip differential)
Don't use the following:
Ø Tires not of the designated size
Ø Tires of different sizes or types at the same time
Ø Tires not sufficiently inflated
If these instructions aren't followed, the rotation of the left and right wheels will be
different and will thus apply a constant load on the limited-slip differential.
This will cause a malfunction.
qReplacing a Tire
WARNING
Always use tires that are in good condition:
Driving with worn tires is dangerous. Reduced braking, steering, and traction could
result in an accident.
If a tire wears evenly, a wear indicator will appear as a solid band across the tread. Replace
the tire when this happens.
Tread wear indicator
New tread
Worn tread
You should replace it before the band is across the entire tread.
NOTE
Tires degrade over time, even when they are not being used on the road. It is recommended that tires
generally be replaced when they are 6 years or older. Heat caused by hot climates or frequent high
loading conditions can accelerate the aging process. You should replace the spare tire when you
replace the other road tires due to the aging of the spare tire. Regarding the manufacturing week and
year is indicated with 4 digit. Refer to The tire labeling on page 9-23.
9-33
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page360
Wednesday, July 8 2009 11:30 AM
Black plate (360,1)
Customer Information
Tire Information (U.S.A.)
qSafety Practices
The way you drive has a great deal to do with your tire mileage and safety. So cultivate
good driving habits for your own benefit.
l
Observe posted speed limits
Avoid fast starts, stops and turns
Avoid potholes and objects on the road
Do no run over curbs or hit the tire against the curb when parking
l
l
l
CAUTION
If you feel a sudden vibration or ride disturbance while driving or you suspect your
tire or vehicle has been damaged, immediately reduce your speed. Drive with caution
until you can safely pull off the road. Stop and inspect the tire for damage. If the tire
is under-inflated or damaged, deflate it, remove the tire and rim and replace it with
your spare tire. If you cannot detect a cause, have the vehicle towed to the nearest
vehicle or tire dealer to have the vehicle inspected.
9-34
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page361
Wednesday, July 8 2009 11:30 AM
Black plate (361,1)
Customer Information
Tire Information (U.S.A.)
Vehicle Loading
WARNING
Do not tow a trailer with this vehicle:
Towing a trailer with this vehicle is dangerous because it has not been designed to
tow a trailer and doing so will affect the drive system which could result in vehicle
damage.
This section will guide you in the proper loading of your vehicle, to keep your loaded
vehicle weight within its design rating capability. Properly loading your vehicle will
provide maximum return of vehicle design performance. Before loading your vehicle,
familiarize yourself with the following terms for determining your vehicle's weight ratings,
from the vehicle's Safety Certification Label and Tire and Load Information Label:
WARNING
Overloaded Vehicle:
Overloading a vehicle is dangerous. The results of overloading can have serious
consequences in terms of passenger safety. Too much weight on a vehicle's
suspension system can cause spring or shock absorber failure, brake failure,
handling or steering problems, irregular tire wear, tire failure or other damage.
Overloading makes a vehicle harder to drive and control. It also increases the
distance required for stopping. In cases of serious overloading, brakes can fail
completely, particularly on steep grades. The load a tire will carry safely is a
combination of the size of the tire, its load range, and corresponding inflation
pressure.
Never overload the vehicle and always observe the vehicle's weight ratings from the
vehicle's Safety Certification and Tire and Load Information labels.
9-35
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page362
Wednesday, July 8 2009 11:30 AM
Black plate (362,1)
Customer Information
Tire Information (U.S.A.)
Base Curb Weight is the weight of the vehicle including a full tank of fuel and all
standard equipment. It does not include passengers, cargo, or optional equipment.
Vehicle Curb Weight is the weight of your new vehicle when you picked it up from your
dealer plus any aftermarket equipment.
PAYLOAD
Payload is the combination weight of cargo and passengers that the vehicle is designed to
carry. The maximum payload for your vehicle can be found on the Tire and Load
Information label on the driver's door frame or door pillar. Look for “THE
COMBINATION WEIGHT OF OCCUPANTS AND CARGO SHOULD NEVER
EXCEED XXX kg or XXX lbs” for your maximum payload. The payload listed on the tire
label is the maximum payload for the vehicle as built by the assembly plant. If any
aftermarket or dealer installed equipment has been installed on the vehicle, the weight of
the equipment must be subtracted from the payload listed on the tire label in order to be
accurate.
9-36
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page363
Wednesday, July 8 2009 11:30 AM
Black plate (363,1)
Customer Information
Tire Information (U.S.A.)
SAMPLE
CARGO
Cargo Weight includes all weight added to the Base Curb Weight, including cargo and
optional equipment.
The cargo weight limit decreases depending on the number of vehicle occupants. The cargo
weight limit can be calculated by subtracting the total weight of the vehicle occupants from
the “combination weight of occupants and cargo should never exceed” value on the tire
label.
9-37
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page364
Wednesday, July 8 2009 11:30 AM
Black plate (364,1)
Customer Information
Tire Information (U.S.A.)
Examples: Based on a single occupant weight of 68 kg (150 lbs), and a value of 385 kg
(849 lbs) for the “combination weight of occupants and cargo should never exceed”:
_
The cargo weight limit with one occupant is 385 kg (849 lbs) 68 kg (150 lbs) = 317 kg
(699 lbs)
_
The cargo weight limit with two occupants is 385 kg (849 lbs) (68 × 2) kg ( (150 × 2)
lbs) = 249 kg (549 lbs)
If the weight of the occupant increases, the cargo weight limit decreases by that much.
GAW (Gross Axle Weight) is the total weight placed on each axle (front and rear) -
including vehicle curb weight and all payload.
GAWR (Gross Axle Weight Rating) is the maximum allowable weight that can be carried
by a single axle (front or rear). These numbers are shown on the Safety Compliance
Certification Label located on the driver's door frame or door pillar. The total load on
each axle must never exceed its GAWR.
GVW
GVW (Gross Vehicle Weight) is the Vehicle Curb Weight
cargo
passengers.
GVWR (Gross Vehicle Weight Rating) is the maximum allowable weight of the fully
loaded vehicle (including all options, equipment, passengers and cargo). The GVWR is
shown on the Safety Compliance Certification Label located on the driver's door
frame or door pillar. The GVW must never exceed the GVWR.
9-38
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page365
Wednesday, July 8 2009 11:30 AM
Black plate (365,1)
Customer Information
Tire Information (U.S.A.)
SAMPLE
WARNING
Exceeding Axle Weight Rating Limits:
Exceeding the Safety Certification Label axle weight rating limits is dangerous and
could result in death or serious injury as a result of substandard vehicle handling,
performance, engine, transmission and/or structural damage, serious damage to the
vehicle, or loss of control.
Always keep the vehicle within the axle weight rating limits.
Do not tow a trailer with this vehicle:
Towing a trailer with this vehicle is dangerous because it has not been designed to
tow a trailer and doing so will affect the drive system which could result in vehicle
damage.
9-39
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page366
Wednesday, July 8 2009 11:30 AM
Black plate (366,1)
Customer Information
Tire Information (U.S.A.)
GCW
GCW (Gross Combination Weight) is the weight of the loaded vehicle (GVW).
GCWR (Gross Combination Weight Rating) is the maximum allowable weight of the
vehicle - including all cargo and passengers - that the vehicle can handle without risking
damage. The GCW must never exceed the GCWR.
WARNING
Exceeding GVWR or GAWR Specifications:
Exceeding the GVWR or the GAWR specified on the certification label is dangerous.
Exceeding any vehicle rating limitation could result in a serious accident, injury, or
damage to the vehicle.
Do not use replacement tires with lower load carrying capacities than the originals
because they may lower the vehicle's GVWR and GAWR limitations. Replacement
tires with a higher limit than the originals do not increase the GVWR and GAWR
limitations.
Never exceed the GVWR or the GAWR specified on the certification label.
9-40
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page367
Wednesday, July 8 2009 11:30 AM
Black plate (367,1)
Customer Information
Tire Information (U.S.A.)
Steps for Determining the Correct Load Limit:
Steps for Determining Correct Load Limit:
(1) Locate the statement “The combined weight of occupants and cargo should
never exceed XXX kg or XXX lbs” on your vehicle's placard.
(2) Determine the combined weight of the driver and passengers that will be
riding in your vehicle.
(3) Subtract the combined weight of the driver and passengers from XXX kg
or XXX lbs.
(4) The resulting figure equals the available amount of cargo and luggage load
capacity. For example, if the “XXX” amount equals 1400 lbs. and there
will be five 150 lb passengers in your vehicle, the amount of available
_
cargo and luggage load capacity is 650 lbs. (1400 750 (5 × 150) = 650
lbs.)
(5) Determine the combined weight of luggage and cargo being loaded on the
vehicle. That weight may not safely exceed the available cargo and luggage
load capacity calculated in Step 4.
9-41
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page368
Wednesday, July 8 2009 11:30 AM
Black plate (368,1)
Customer Information
Reporting Safety Defects
Reporting Safety Defects (U.S.A.)
If you believe that your vehicle has a defect which could cause a crash or could
cause injury or death, you should immediately inform the National Highway
Traffic Safety Administration (NHTSA) in addition to notifying Mazda Motor
Corporation (Your Mazda Importer/Distributor).
If NHTSA receives similar complaints, it may open an investigation, and if it
finds that a safety defect exists in a group of vehicles, it may order a recall and
remedy campaign. However, NHTSA cannot become involved in individual
problems between you, your dealer, or Mazda Motor Corporation (Your Mazda
Importer/Distributor).
To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-
327-4236 (TTY:1-800-424-9153) ; go to http://www.safercar.gov; or write to:
Administrator, NHTSA, 1200 New Jersey Avenue, SE., Washington, DC,
20590. You can also obtain other information about motor vehicle safety from
http://www.safercar.gov.
NOTE
If you live in the U.S.A., all correspondence to Mazda Motor Corporation should be forwarded to:
Mazda North American Operations
7755 Irvine Center Drive
Irvine, California 92618-2922
or
P.O. Box 19734
Irvine, CA 92623-9734
Customer Assistance Center or toll free at 1 (800) 222-5500
If you live outside of the U.S.A., please contact the nearest Mazda Distributor shown (page 9-13) in
this booklet.
9-42
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page369
Wednesday, July 8 2009 11:30 AM
Black plate (369,1)
Customer Information
Reporting Safety Defects
Reporting Safety Defects (Canada)
Canadian customers who wish to report a safety-related defect to Transport Canada, Defect
Investigations and Recalls, may telephone the toll free hotline 1-800-333-0510, or contact
Transport Canada by mail at: Transport Canada, ASFAD, Place de Ville Tower C, 330
Sparks Street, Ottawa ON K1A 0N5.
For additional road safety information, please visit the Road Safety website at:
http://www.tc.gc.ca/roadsafety/menu.htm
9-43
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page370
Wednesday, July 8 2009 11:30 AM
Black plate (370,1)
Customer Information
Service Publications
Service Publications
Factory-authorized Mazda service publications are available for owners who wish to do
some of their own maintenance and repair.
When requesting any of our publications through an Authorized Mazda Dealer, refer to the
chart below.
If they do not have what you need in stock, they can order it for you.
PUBLICATION ORDER NUMBER
9999-95-012B-10
PUBLICATION DESCRIPTION
2010 WORKSHOP MANUAL (English)
2010 WORKSHOP MANUAL (Spanish)
2010 WIRING DIAGRAM (English)
2010 WIRING DIAGRAM (Spanish)
2010 OWNER'S MANUAL
9999-MX-012B-10
9999-95-074G-10
9999-MX-074G-10
9999-95-005C-10 (U.S.A. only)
9999-EC-005C-10 (Canada only)
9999-MX-005C-10 (Puerto Rico, Mexico only)
9999-95-MODL-10
2010 OWNER'S MANUAL
2010 OWNER'S MANUAL
2010 SERVICE HIGHLIGHTS
9999-95-NAV1-10R (U.S.A. only)
9999-EC-NAV1-10R (Canada only)
9999-PR-NAV1-10R (Puerto Rico, Mexico only)
2010 NAVIGATION SYSTEM OWNER'S MANUAL
2010 NAVIGATION SYSTEM OWNER'S MANUAL
2010 NAVIGATION SYSTEM OWNER'S MANUAL
qWORKSHOP MANUAL:
Covers recommended maintenance and repair procedures of the drive train, body and
chassis.
qWIRING DIAGRAM:
Provides electrical schematics as well as component location for the entire electrical
system.
qOWNER'S MANUAL:
This booklet contains information regarding the proper care and operation of your vehicle.
This is not a technician's manual.
qSERVICE HIGHLIGHTS:
Provides description and operation of the many systems of your Mazda.
9-44
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page371
Wednesday, July 8 2009 11:30 AM
Black plate (371,1)
Customer Information
Service Publications
qNAVIGATION SYSTEM OWNER'S MANUAL:
This booklet contains information regarding the proper operation and use of the navigation
system. This is not a technician's manual.
9-45
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page372
Wednesday, July 8 2009 11:30 AM
Black plate (372,1)
9-46
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page374
Wednesday, July 8 2009 11:30 AM
Black plate (374,1)
Identification Numbers
qChassis Number
Vehicle Information Labels
qVehicle Identification Number
The vehicle identification number legally
identifies your vehicle. The number is on
a plate attached to the cowl panel located
on the left corner of the dashboard. This
plate can easily be seen through the
windshield.
qVehicle Emission Control
Information Label
q
Motor Vehicle Safety Standard Label
qTire Pressure Label
10-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page375
Wednesday, July 8 2009 11:30 AM
Black plate (375,1)
Identification Numbers
qEngine Number
Forward
10-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page376
Wednesday, July 8 2009 11:31 AM
Black plate (376,1)
Specifications
Specifications
qEngine
Item
Type
Specification
DOHC-16V in-line, 4-cylinder
87.5 × 94.0 mm (3.44 × 3.70 in)
2,261 ml (2,261 cc, 138.0 cu in)
9.7
Bore × Stroke
Displacement
Compression ratio
qElectrical System
Item
Classification
Battery
12V-48AH/5HR, 12V-52AH/5HR
Spark-plug number
Spark-plug gap
LFG1 18110*1, L3Y2 18 110
1.25―1.35 mm (0.049―0.053 in)
*1 ex factory
CAUTION
When cleaning the iridium plugs, do not use a wire brush. The fine particulate
coating on the iridium alloy and platinum tips could be damaged.
qLubricant Quality
Lubricant
Classification
Engine oil
Refer to the recommended SAE viscosity numbers on page 8-18.
API Service
SAE
GL-4
Manual transaxle oil
75W-80
Automatic transaxle fluid
Power steering fluid
Brake/Clutch fluid
Mazda Genuine ATF M-V
Mazda Genuine ATF M-III or equivalent (e.g. Dexron® II)
SAE J1703 or FMVSS116 DOT-3
qCapacities
(Approximate Quantities)
Item
With oil filter replacement
Without oil filter replacement
Capacity
4.3 L (4.5 US qt, 3.8 Imp qt)
Engine oil
3.9 L (4.1 US qt, 3.4 Imp qt)
7.5 L (7.9 US qt, 6.6 Imp qt)
Coolant
Manual transaxle oil
Automatic transaxle fluid
Fuel tank
2.77 L (2.93 US qt, 2.44 Imp qt)
8.14 L (8.60 US qt, 7.16 Imp qt)
60.0 L (15.9 US gal, 13.2 Imp gal)
Check oil and fluid levels with dipsticks or reservoir gauges.
10-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page377
Wednesday, July 8 2009 11:31 AM
Black plate (377,1)
Specifications
qDimensions
Item
Overall length
Overall width
Vehicle specification
4,620 mm (181.9 in)
1,745 mm (68.7 in)
1,630 mm (64.2 in)
1,530 mm (60.2 in)
1,515 mm (59.6 in)
2,750 mm (108.3 in)
Overall height
Front tread
Rear tread
Wheelbase
qWeights
(Manual transaxle)
Item
Weight
GVWR (Gross Vehicle Weight Rating)
2,090 kg (4,608 lb)
1,015 kg (2,238 lb)
1,090 kg (2,403 lb)
Front
Rear
GAWR (Gross Axle Weight Rating)
(Automatic transaxle)
Item
Weight
GVWR (Gross Vehicle Weight Rating)
2,116 kg (4,665 lb)
1,046 kg (2,306 lb)
1,085 kg (2,392 lb)
Front
Rear
GAWR (Gross Axle Weight Rating)
qAir Conditioner
Item
Classification
Refrigerant Type
HFC134a (R-134a)
10-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page378
Wednesday, July 8 2009 11:31 AM
Black plate (378,1)
Specifications
qLight Bulbs
Exterior light
Category
Light bulb
Wattage
60
ECE R (SAE)
HB3 (HB3)
H7 (H7)
High beam
Headlights
Low beam
Halogen
55
Xenon fusion
35
D2S (D2S)
Front turn signal lights/Parking lights (Front side-marker lights)
27/8
55
― (#1157NA)
H11 (H11)
Fog lightsí
High-mount brake light
Reverse lights
LED*1
― (―)
18
W16W (#921)
WY21W (32CP)
W21/5W (#7443)
― (―)
Rear turn signal lights
21
Rear combination
lights
Bulb type
LED type
21/5
LED*1
5
Brake lights/Taillights
(Rear side-marker lights)
License plate lights
W5W (4CP)
*1 LED is the abbreviation for Light Emitting Diode.
Interior light
Category
Light bulb
Wattage
ECE R
―
Luggage compartment light
Overhead light/Map lights (Front)
Overhead light (Rear)
8
5
W5W
―
10
qTires
NOTE
The tires have been optimally matched with the chassis of your vehicle.
When replacing tires, Mazda recommends that you replace tires of the same type originally fitted to
your vehicle. For details, contact an Authorized Mazda Dealer.
Check the tire pressure label for tire size and inflation pressure.
Refer to Tire Inflation Pressure on page 8-31.
Standard tire
Inflation pressure
Tire size
Front
Rear
P205/55R16 89H
205/50R17 89V
P205/50R17 88V
230 kPa (34 psi)
230 kPa (34 psi)
240 kPa (35 psi)
230 kPa (34 psi)
230 kPa (34 psi)
240 kPa (35 psi)
10-6
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page379
Wednesday, July 8 2009 11:31 AM
Black plate (379,1)
Specifications
Temporary tire
Tire size
Inflation pressure
420 kPa (60 psi)
T125/70D16 96M
qFuses
Refer to the fuse rating on page 8-43.
10-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page380
Wednesday, July 8 2009 11:31 AM
Black plate (380,1)
10-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page382
Wednesday, July 8 2009 11:31 AM
Black plate (382,1)
Index
A
B
Brake/Clutch
Automatic Transaxle
Brakes
B
C
Battery
Child Restraint
Beep Sounds
11-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page383
Wednesday, July 8 2009 11:31 AM
Black plate (383,1)
Index
C
E
Engine
Engine Coolant
D
Defroster
F
Flasher
Fluids
E
11-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page384
Wednesday, July 8 2009 11:31 AM
Black plate (384,1)
Index
F
I
Fuel
G
H
Headlights
J
K
I
Ignition
L
Light Bulbs
11-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page385
Wednesday, July 8 2009 11:31 AM
Black plate (385,1)
Index
L
P
M
R
Maintenance
Mirrors
S
Seat Belt System
Seats
O
P
Security System
11-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page386
Wednesday, July 8 2009 11:31 AM
Black plate (386,1)
Index
S
T
SRS Air Bags
Tires
Towing
T
Tiedown
U
V
11-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page387
Wednesday, July 8 2009 11:31 AM
Black plate (387,1)
Index
W
Windows
11-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
Mazda5_8AU7-EA-09H_Edition1 Page388
Wednesday, July 8 2009 11:31 AM
Black plate (388,1)
11-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8AU7-EA-09H
|
La Crosse Technology Clock Radio WS 8054U User Manual
Leica Projector L2 User Manual
Life Fitness Exercise Bike M051 00K39 A167 User Manual
Linksys Network Card Compact USB 20 User Manual
Lowrance electronic GPS Receiver GlobalMap 3300C User Manual
Makita Network Card FP2 Series User Manual
Master Bilt Refrigerator TLG 27HD User Manual
Melissa Food Warmer 750 026 User Manual
Mellerware Slow Cooker 27560 User Manual
Mercedes Benz Stereo Receiver A 002 584 34 71 User Manual