Leica Lino
L360, L2P5, L2+, L2, P5, P3
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
Insert the batteries observing the correct polarity
Use alkaline batteries or rechargeable batteries only
Remove the batteries if the instrument is not to
be used for a long period of time (to prevent
corrosion)
de
en
F
User Manual
Version 757665g
English
I
Congratulations on your purchase of the Leica Lino.
The safety instructions follow the
E
P
section on how to operate the
instrument. Before starting up the
NL
DK
S
L2, P3, P5
instrument for the first time, please
read through the entire User Manual paying special
N
FIN
J
Operation.............................................................3
Technical data...................................................12
Safety instructions ...........................................14
CN
ROK
PL
HR
H
Start up
L2P5, L2+
RUS
CZ
GR
LT
Inserting / replacing batteries
Slide the locking button forwards to unlock the
battery compartment. Open the battery compart-
ment cover and insert the batteries, observing the
correct polarity. Then press the battery compartment
cover back down until it engages.
The battery symbol 9 lights up when the battery
voltage is too low. Replace the batteries as soon as
possible.
LV
EST
SLO
SK
m
Leica Lino 757665g en
1
Start up
Download from Www.Somanuals.com. All Manuals Search And Download.
TR
de
en
F
Charging / first-time use
•
The battery must be charged prior to first use
because it is delivered with as low an energy
content as possible.
The permissible temperature range for charging is
between 0°C and +40°C/+32°F and +104°F. For
optimal charging we recommend charging the
batteries at a low ambient temperature of +10°C
to +20°C/+50°F to +68°F if possible.
It is normal for the battery to become warm
during charging.
I
•
E
P
NL
DK
S
•
N
FIN
J
L360
Lino L360
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
1
LV
EST
SLO
SK
m
7h
1 Jack for battery charger
Leica Lino 757665g en
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Start up
TR
de
en
F
Operation
6
4
7
Keypad and control elements
1 LASER key
I
Lino L360
2 PULSE/POWER SAVE MODE key
3 Lock switch
E
7
5
8
10
P
Lino L2P5
6
1
NL
DK
S
11
2
9
Display
4 Laser crossline
5
1
9
2
8
5 Horizontal laser line
6 Vertical laser line
7 Locked
8 Pulse/Power save mode ON
9 Battery voltage too low
AT Plumbing and crossline intersection point
AK Plumbing point
N
FIN
J
CN
ROK
PL
HR
H
7
5
6
1
+
Lino L2
8
AL Laser switched on
2
9
Lino L360
RUS
CZ
GR
LT
Leica Lino L2
7
8
9
6
5
4
Leica Lino P3
9
12
1
2
1
LV
EST
SLO
SK
m
3
Leica Lino 757665g en
3
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
TR
de
en
F
Switching on/off
Lino L360, L2P5, L2+, and L2:
Lino P3 and Lino P5:
•
ON: Briefly press the LASER key 1.
•
ON: Move the Lock switch 3 to the right.
•
OFF: Press and hold down the LASER key 1.
•
OFF: Move the Lock switch 3 to the left.
I
E
Laser functions
P
Pressing the LASER key 1 activates the following laser functions:
NL
DK
S
L360
L360
L2P5
L2P5
Action
L2
L2+
P3
P5
not in Lock
mode
not in Lock
mode
in Lock mode
in Lock mode
N
FIN
J
horizontal and
vertical
only
horizontal and
vertical
only
horizontal and horizontal and
1x
2x
all 3 points
all 5 points
horizontal
horizontal
vertical
vertical
CN
ROK
PL
HR
H
only
horizontal
all lines and
points
only
horizontal
only
horizontal
only plumbing only plumbing
only vertical
again as 1x
only vertical
again as 1x
points
points
plumbing
point and
right/left
3x
only vertical
all points
only vertical
only vertical
again as 1x
RUS
CZ
GR
LT
only plumbing
point
4x
5x
again as 1x
-
-
-
-
-
again as 1x
-
again as 1x
-
-
-
again as 1x
-
again as 1x
LV
EST
SLO
SK
m
Leica Lino 757665g en
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Operation
TR
de
en
F
Self-levelling and Lock functions
Pulse/Power save mode
The instrument automatically levels itself within the
specified grade range (Refer to "Technical data") .
Press the Lock switch 3 in order to transport or tilt
the instrument beyond the self-levelling range. When
locked, the pendulum is fixed and the self-levelling
function is deactivated.
(only Lino L360, L2P5, L2+, and L2)
The instrument is fitted with a Power save mode. If
particularly good visibility of the laser line is not
necessary and you wish to save energy, you can
switch the Pulse mode on and off by pressing the
PULSE/POWER SAVE MODE key 2.
I
E
P
To be able to detect the laser lines over long
distances (> 15 m) or in unfavourable lighting condi-
tions, a laser detector can be used. The detector is
able to locate the laser beam in Pulse mode, even
over long distances.
NL
DK
S
N
(Laser detector refer to accessories)
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
m
Leica Lino 757665g en
5
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
TR
de
en
F
Applications
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
m
Leica Lino 757665g en
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Operation
TR
How to use the wall mount bracket:
de
en
F
Lino L360
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
m
Leica Lino 757665g en
7
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
TR
de
en
F
Checking the accuracy of the Leica
Lino
Check the accuracy of your Leica Lino regu-
)
I
larly and particularly before important measuring
E
tasks.
A1
A2
P
B1
B2
Checking the accuracy of the levelling
NL
DK
S
5 m
Then place the instrument at the same elevation as
close as possible to wall A and again mark the hori-
zontal laser line or the laser dot on wall A (-> A2) .
Rotate the instrument by 180° again and mark the
laser on wall B (-> B2). Measure the distances of the
marked points A1-A2 and B1-B2. Calculate the differ-
ence of the two measurements. If the difference
does not exceed 2 mm, then the Leica Lino is within
tolerance.
N
FIN
J
B1
A1
CN
ROK
PL
HR
H
2.5 m
2.5 m
Set the instrument on a tripod half-way between two
walls (A+B) that are approx. 5 m apart.
| (A1 - A2) - (B1 - B2) | ≤ 2 mm
Place the Lock switch 3 in the "Unlocked" (
)
RUS
CZ
GR
LT
position.
Direct the instrument at wall A and switch on the
instrument. Activate the horizontal laser line or laser
dot and mark the position of the line or the dot on
wall A (-> A1).
Rotate the instrument by 180° and mark the hori-
zontal laser line or the laser dot in exactly the same
way on wall B (-> B1).
LV
EST
SLO
SK
m
Leica Lino 757665g en
8
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
TR
Checking the accuracy of the horizontal line Checking the accuracy of the vertical line:
de
en
F
(only Lino L360, L2P5, L2+, and L2)
(only Lino L360, L2P5, L2+, and L2)
I
E
max.
2 mm
P
max.
3 mm
NL
DK
S
5 m
1.5 m
N
FIN
J
Place the Lock switch 3 in the "Unlocked" (
)
Place the Lock switch 3 in the "Unlocked" (
)
position.
position.
CN
ROK
PL
HR
H
Position the instrument approx. 5 m away from the
wall. Direct the instrument at the wall and switch on
with the LASER key 1. Activate the laser line with the
LASER key 1 and mark the intersection point of laser
crosshairs on the wall.
Swivel the instrument to the right and then to the
left. Observe the vertical deviation of the horizontal
line from the marking. If the difference does not
As reference, use a plumb-bob and attach it as close
as possible to an approx. 3 m high wall.
Position the instrument at a distance of approx.
1.5 m from the wall at an elevation of approx. 1.5 m.
Direct the instrument at the wall and switch on with
the LASER key 1. Activate the laser line with the
LASER key 1. Rotate the instrument and align it with
the bottom of the plumb line. Now read off the
RUS
CZ
GR
LT
exceed 3 mm, then the Leica Lino is within tolerance. maximum deviation of the laser line from the top of
the plumb line. If the difference does not exceed
2 mm, then the Leica Lino is within tolerance.
LV
EST
SLO
SK
m
Leica Lino 757665g en
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Operation
TR
Rotate the instrument by 180° so that it points in the
opposite direction 2 to direction 1. Adjust the instru-
ment so that the laser beam hits point A1 exactly. If
point B2 is no further than 2 mm away from point B1,
then the Leica Lino is within tolerance.
Checking the accuracy of the vertical
plumbing:
(only Lino P3, Lino P5 and Lino L2P5)
Place the Lock switch 3 in the "Unlocked" (
position.
de
en
F
)
I
Should your Leica Lino be outside of the spec-
ified tolerance, please contact an authorised dealer-
ship or Leica Geosystems.
E
Checking the upper plumbing point:
)
P
B1
B2 max. 2 mm
NL
DK
S
Display notices
1.5 m
Falling below or exceeding the permissible
temperature range:
N
The laser switches off and all symbols flash.
Outside of the self-levelling range:
The laser switches off and the symbol of the function
used starts to flash.
1
2
FIN
J
A1
CN
ROK
PL
HR
H
Checking the lower plumbing point:
Pendulum locked:
A1
(only Lino L360, L2P5, L2+, and L2)
The laser beam is not levelled and the Lock symbol 7
lights up.
1
2
RUS
CZ
GR
LT
1.5 m
max. 2 mm
B2
B1
Set up the laser on its tripod or wall mount bracket
near point A1 at a minimum distance of 1.5 m from
point B1. The horizontal laser is aligned in direction 1.
Mark the laser dots A1 and B1 with a pin.
LV
EST
SLO
SK
m
Leica Lino 757665g en
10
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
TR
de
en
F
Care and advice on operation
Warranty
Do not immerse the instrument in water. Wipe off dirt
with a damp soft cloth. Do not use aggressive
cleaning agents or solvents. Treat the instrument
with the same care that you would apply to binocu-
lars or a camera.
This product comes with a three* year warranty from
Leica Geosystems.
More detailed information can be found at:
I
E
Dropping or violent shaking of the instrument may
damage it. Check the instrument for any damage
before using it. Check the levelling accuracy of the
instrument regularly.
P
All rights reserved for changes (drawings, descrip-
tions and technical specifications).
NL
DK
S
*) To receive the three year warranty, the product
must be registered on our website
within eight weeks of the purchase date. If the
product is not registered, a two year warranty
applies.
Transport
N
To safely transport the instrument, set the Lock
FIN
J
switch 3 to "Locked" (
).
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
m
Leica Lino 757665g en
11
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
TR
de
en
F
Technical data
L360
L2P5
> 30 m
L2
L2+
P3
P5
Range
Range with detector
Levelling accuracy @ 5 m
Self-levelling range
up to 15 m*
-
I
1.5 mm
1 mm
1.5 mm
E
3.5° 0.5°
-
4° 0.5°
P
Accuracy of plumbing point @ 5 m
Accuracy of horizontal line @ 5 m
1.5 mm
1.5 mm
-
-
1.5 mm
-
NL
DK
S
Vertical accuracy @ 3 m
0.75 mm
-
line length
360°
Beam divergence
<180° <120°
<180°
-
-
(horizontal)
N
Number of laser dots
Number of laser lines
-
4
3
5
2
-
FIN
J
vertical,
up, down,
forward,
right, left
vertical,
horizontal,
up, down,
right, left
up, down,
forward
Beam direction
vertical, horizontal
horizontal
CN
ROK
PL
HR
H
Laser type
Batteries
635 nm, laser class II
NiMH battery
pack
Type AA
4 x 1.5 V
Type AA
3 x 1.5 V
Type AA
4 x 1.5 V
Type AA
3 x 1.5 V
(rechargeable)
Protection class spray water / dust
Operating temperature
Storage temperature
IP65
IP54
-10°C to 40°C
-25°C to 70°C
RUS
CZ
GR
LT
117.8 x
130.7 x
75.4 mm
117.8 x
131.7 x 145 x
96.2 mm
96 x 91 x
54 mm
Dimensions (H x D x W)
130.7 x
99.1 x 108.1 x 59.3 mm
75.4 mm
1009 g
(with batte-
ries)
Weight without batteries
370 g
321 g
437.2 g
310 g
320 g
LV
EST
SLO
SK
m
Tripod thread
* depending on lighting conditions
All rights reserved for changes (on drawings, descriptions and technical data).
1/4"
Leica Lino 757665g en
12
Technical data
Download from Www.Somanuals.com. All Manuals Search And Download.
TR
L360
L2P5
> 100 ft
L2
L2+
P3
P5
de
en
F
Range
Range with detector
up to 50 ft*
-
Levelling accuracy @ 16 ft
Self-levelling range
Accuracy of plumbing point @ 16 ft
Accuracy of horizontal line @ 16 ft
1/16 “
0.04 in
1/16 “
3.5° 0.5°
-
4° 0.5°
I
1/16 “
1/16 “
-
-
1/16 “
-
E
P
Vertical accuracy @ 10 ft
1/32 “
-
-
line length
NL
DK
S
360°
Beam divergence
<180°
4
<120°
<180°
(horizontal)
Number of laser dots
Number of laser lines
-
3
5
2
-
N
vertical,
horizontal,
up, down,
right, left
FIN
J
up, down,
forward,
right, left
vertical,
up, down,
forward
Beam direction
Laser type
vertical, horizontal
horizontal
CN
ROK
PL
HR
H
635 nm, laser class II
NiMH battery
pack
Type AA
4 x 1.5 V
Type AA
3 x 1.5 V
Type AA
4 x 1.5 V
Batteries Type
Type AA, 3 x 1.5 V
(recharge-
able)
Protection class spray water / dust
Operating temperature
Storage temperature
IP65
IP54
14°F to +104°F
-13°F to +158°F
RUS
CZ
GR
LT
5.19 x 5.71 x
3.79 in
14.6 x
3.8 x 3.6 x
14.6 x
Dimensions (H x D x W)
3.9 x 4.25 x 2.3 in
5.1 x 2.95 in
2.1 in
5.1 x 2.95 in
35.6 oz
Weight without batteries
(with
13.1 oz
11.3 oz
15.4 oz
10.9 oz
11.3 oz
batteries)
LV
EST
SLO
SK
m
Tripod thread
* depending on lighting conditions
1/4"
All rights reserved for changes (on drawings, descriptions and technical data).
Leica Lino 757665g en
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Technical data
TR
de
en
F
NiMH battery pack L360
(rechargeable, Art.No.: 790532)
Permitted use
•
Projection of horizontal and vertical laser lines
and laser dots
Input voltage
Input current
Charging time
7.5 V
1 A
I
Prohibited use
E
•
•
•
Using the product without instruction
Using outside the stated limits
P
7 h
NL
DK
S
Deactivation of safety systems and removal of
explanatory and hazard labels
Safety instructions
The person responsible for the instrument must
ensure that all users understand these directions and
adhere to them.
•
Opening of the equipment by using tools (screw-
drivers, etc.), as far as not specifically permitted
for certain cases
N
FIN
J
•
•
•
Carrying out modification or conversion of the
product
Deliberate dazzling of third parties; also in the
dark
Symbols used
CN
ROK
PL
HR
H
The symbols used have the following meanings
WARNING:
Indicates a potentially hazardous situation or
an unintended use which, if not avoided, will result in
death or serious injury.
ƽ
Inadequate safeguards at the surveying site.
Limits of use
CAUTION:
Refer to section "Technical data".
RUS
CZ
GR
LT
ƽ
)
Indicates a potentially hazardous situation or
The Leica Lino is designed for use in areas perma-
an unintended use which,if not avoided, may result in
minor injury and/or appreciable material, financial
and environmental damage.
nently habitable by humans. Do not use the product
in explosion hazardous areas or in aggressive envi-
ronments.
Important paragraphs which must be adhered
to in practice as they enable the product to be used
in a technically correct and efficient manner.
LV
EST
SLO
SK
m
)
Leica Lino 757665g en
14
Safety instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
TR
WARNING:
Flat batteries must not be disposed of with
household waste. Care for the environment and take
them to the collection points provided in accordance
with national or local regulations.
de
en
F
ƽ
Areas of responsibility
Responsibilities of the manufacturer of the original
equipment Leica Geosystems AG, CH-9435 Heerbrugg
(for short Leica Geosystems):
I
Leica Geosystems is responsible for supplying the
product, including the User Manual in a completely
safe condition.
Leica Geosystems is not responsible for third
party accessories.
The product must not be disposed of with
the household waste.
Dispose of the product appropriately
in accordance with the national regulations
in force in your country.
E
P
NL
DK
S
Responsibilities of the person in charge of the
instrument:
The person in charge of the instrument has the
following duties:
Always prevent access to the product by
unauthorised personnel.
N
Product specific treatment and waste management
information can be downloaded from the Leica
Geosystems home page at
received from the Leica Geosystems dealer.
FIN
J
•
•
To understand the safety instructions on the
product and the instructions in the User Manual.
To be familiar with local safety regulations
relating to accident prevention.
CN
ROK
PL
HR
H
WARNING
ƽ
Hazards in use
Using a battery charger not recommended by
Leica Geosystems can destroy the batteries. This can
cause fire or explosions.
CAUTION:
ƽ
Watch out for erroneous measurements if the
RUS
CZ
GR
LT
instrument is defective or if it has been dropped or
has been misused or modified.
Precautions:
Only use chargers recommended by Leica Geosys-
tems to charge the batteries.
Carry out periodic test measurements.
Particularly after the instrument has been subject to
abnormal use, and before, during and after important
measurements.
)
LV
EST
SLO
SK
m
Refer to section "Checking the accuracy of the Leica
Lino".
Leica Lino 757665g en
15
Safety instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
TR
de
en
F
Electromagnetic Compatibility
(EMC)
FCC statement (applic. in U.S.)
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful inter-
ference in a residential installation.
WARNING:
ƽ
I
The Leica Lino conforms to the most stringent
E
requirements of the relevant standards and regula-
tions. Yet, the possibility of it causing interference in
other devices cannot be totally excluded.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation.
P
NL
DK
S
N
If this equipment does cause harmful interference to
radio or television reception, which can be deter-
mined by turning the equipment off and on, the user
is encouraged to try to correct the interference by
one or more of the following measures:
FIN
J
CN
ROK
PL
HR
H
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
•
•
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help
RUS
CZ
GR
LT
WARNING:
ƽ
Changes or modifications not expressly
LV
EST
SLO
SK
m
approved by Leica Geosystems for compliance could
void the user’s authority to operate the equipment.
Leica Lino 757665g en
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Safety instructions
TR
de
en
F
Laser classification
The Leica Lino produces visible laser beams, which are emitted from the instrument:
I
E
P
NL
DK
S
Lino L360
N
FIN
J
CN
ROK
PL
HR
H
It is a Class 2 laser product in accordance with:
WARNING:
ƽ
Looking directly into the beam with optical aids
•
IEC60825-1 : 2007 "Radiation safety of laser
products"
RUS
CZ
GR
LT
(e.g. binoculars, telescopes) can be hazardous.
CAUTION:
Laser Class 2 products:
ƽ
Looking into the laser beam may be hazardous
Do not stare into the laser beam or direct it towards
other people unnecessarily. Eye protection is
normally afforded by aversion responses including
the blink reflex.
to the eyes.
LV
EST
SLO
SK
m
Leica Lino 757665g en
17
Safety instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
TR
de
en
F
Labelling
L2P5
Laser Radiation
Laser Radiation
Do not stare into the beam
Do not stare into the beam
I
Laser class 2
Laser class 2
in acc. with IEC 60825-1:2007
in acc. with IEC 60825-1:2007
E
Maximum radiation power: <1.0mW c.w.
Maximum radiation power: <1.0mW c.w.
Emitted wavelength:
Beam divergence
620-690nm
180°
Emitted wavelength:
Beam divergence
620-690nm
<1.5 mrad
P
<
NL
DK
S
L2
Laser Radiation
Do not stare into the beam
Laser class 2
N
in acc. with IEC 60825-1:2007
Maximum radiation power: <1.0mW c.w.
FIN
J
Emitted wavelength:
Beam divergence
620-690nm
<120°
CN
ROK
PL
HR
H
L2+
L360
Laser Radiation
Laser Radiation
Do not stare into the beam
Do not stare into the beam
Laser class 2
Laser class 2
in acc. with IEC 60825-1:2007
in acc. with IEC 60825-1:2007
Maximum radiation power: <1.0mW c.w.
Maximum radiation power: <1.0mW c.w.
Emitted wavelength:
Beam divergence
620-690nm
Emitted wavelength:
Beam divergence
620-690nm
<
180°
<360°
RUS
CZ
GR
LT
P3/P5
Laser Radiation
Do not stare into the beam
Laser class 2
in acc. with IEC 60825-1:2007
Maximum radiation power: <1.0mW c.w.
LV
EST
SLO
SK
m
Emitted wavelength:
Beam divergence
620-690nm
<1.5 mrad
Leica Lino 757665g en
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Safety instructions
TR
Position of label:
de
en
F
Lino L360
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
m
Leica Lino 757665g en
19
Safety instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
TR
Leica Geosystems AG, Heerbrugg, Switzerland has been certified as being equipped with a
quality system which meets the International Standards of Quality Management and Quality
Systems (ISO standard 9001) and Environmental Management Systems (ISO standard 14001).
Total Quality Management - Our commitment to total customer satisfaction. Ask your local
Leica Geosystems agent for more information about our TQM program.
Copyright Leica Geosystems AG, Heerbrugg,
Switzerland 2012
Original text (757665g EN)
Leica Geosystems AG
CH-9435 Heerbrugg
(Switzerland)
Download from Www.Somanuals.com. All Manuals Search And Download.
|
