WDR-516S
Installation Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Notice
1. Do not place heavy objects on the top of the WDR-516S.
2. WDR-516S is not weatherproof. In case of outdoor use, equip a weatherproof case to protect WDR-
516S from water, moisture, or temperature (higher or lower than specifications). To clean the WDR-516S,
gently wipe the outside with a clean dry cloth.
3. Be sure to use a DC adapter that is provided by DENTEC Corp. Connecting WDR-516S directly to an
AC current will cause electric damages to WDR-516S.
4. Be careful not to drop the WDR-516S. Physical shocks may harm the product. In addition, be sure the
WDR-516S is secured after installation.
5. If WDR-516S does not operate properly, please contact the closest DENTEC distributor for after sales
service. Tampering or disassembling the product will void the warranty.
6. Security surveillance laws may differ for each country. Therefore, please contact the local region first
to avoid any surveillance law violations.
Download from Www.Somanuals.com. All Manuals Search And Download.
OVERVIEW.................................................................................................................................. 7
1. What is WDR-516S?............................................................................................................ 7
2. Supplied Accessories......................................................................................................... 8
3. Description & Function ...................................................................................................... 9
INSTALLATION AND CONNECTION ....................................................................................... 11
4. Connecting & Running WDR-516S.................................................................................. 11
4.1. Connecting camera.......................................................................................................11
4.2. Connecting Monitor...................................................................................................... 12
4.3. Connecting Audio ........................................................................................................ 12
4.4. Supplying Power.......................................................................................................... 13
5. Running OSD menu.......................................................................................................... 14
5.1. Using menu.................................................................................................................. 14
5.2. Dialogue Box to Edit a Word........................................................................................ 15
6. Setting remote controller ................................................................................................. 16
6.1. Setting remote control DIP switch................................................................................ 16
6.2. Set ID of WDR-516S................................................................................................... 16
6.3. Selecting WDR-516S................................................................................................... 17
6.4. Operable range of remote controller............................................................................ 18
6.5. Loading the batteries into remote controller................................................................. 18
7. WDR-516S Configuration ................................................................................................. 19
7.1. Basic Configuration...................................................................................................... 19
7.2. Advanced Configuration .............................................................................................. 19
7.3. External Storage & Backup Configuration ................................................................... 20
7.4. Internet/Intranet Configuration..................................................................................... 20
8. WDR-516S Basic Setting.................................................................................................. 21
8.1. Viewing Image ............................................................................................................. 21
8.2. Setting Date & Time..................................................................................................... 22
8.2.1.
Time Zone............................................................................................................. 22
4
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
8.2.2.
8.2.3.
8.2.4.
8.2.5.
8.2.6.
Daylight Saving..................................................................................................... 22
Time Format ......................................................................................................... 23
Date...................................................................................................................... 23
Time...................................................................................................................... 23
Apply Date/Time ................................................................................................... 23
8.3. Setting Recording Condition........................................................................................ 24
8.3.1.
8.3.2.
8.3.3.
8.3.4.
8.3.5.
8.3.6.
8.3.7.
Configuration Status............................................................................................. 25
Channel Status..................................................................................................... 25
Recording Speed/Quality...................................................................................... 25
Speed(ips) ............................................................................................................ 25
Quality .................................................................................................................. 26
Audio Recording................................................................................................... 26
Apply..................................................................................................................... 26
9. Connecting and Configuring Sensor .............................................................................. 27
9.1. Connecting Sensor Input ............................................................................................. 27
9.2. Setting Sensor at OSD menu ...................................................................................... 28
10.
10.1.
10.2.
Connecting & Configuring Relay Out.......................................................................... 29
Connecting Relay Out.............................................................................................. 29
Configuring Relay Out.............................................................................................. 30
Connecting External Device with Serial Port.............................................................. 31
11.
11.1.
Connecting Text Input Device (ATM / POS / Access Control) .................................. 31
12.
Connecting & Configuring Serial Ports for Pan/Tilt/Zoom ........................................ 32
12.1.
Connecting Serial Port ............................................................................................. 32
Connecting RS232............................................................................................ 32
Connecting RS485............................................................................................ 32
Connecting RS422............................................................................................ 32
12.1.1.
12.1.2.
12.1.3.
12.2.
Configuring Serial Port............................................................................................. 33
13.
14.
Connecting USB Device ............................................................................................... 34
Connecting External Storage....................................................................................... 36
14.1.
14.2.
IEEE1394 Bay.......................................................................................................... 36
Connecting IEEE1394 Device.................................................................................. 36
5
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
14.3.
14.4.
Available HDD.......................................................................................................... 36
Registering & Formatting HDD................................................................................. 37
15.
15.1.
15.2.
16.
16.1.
Network Monitoring & Managing ................................................................................. 38
Connecting Ethernet ................................................................................................ 38
Configuring WDR-516S’s Network Information........................................................ 39
Using WDR Manager..................................................................................................... 40
PC System Requirements for running WDR Manager............................................. 40
Installing WDR Manager................................................................................... 40
Uninstalling WDR Manager............................................................................... 42
16.1.1.
16.1.2.
16.2.
Configstation ............................................................................................................ 42
Monitor ..................................................................................................................... 43
Playback................................................................................................................... 43
16.3.
16.4.
APPENDIX ............................................................................................................................... 44
Appendix #1 Installing and Replacing internal HDD.......................................................... 45
Appendix #2 Video Input ...................................................................................................... 50
Appendix #3 Using CD-ROM ................................................................................................ 51
Appendix #4 Specification.................................................................................................... 52
6
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
OVERVIEW
1. What is WDR-516S?
The WDR-516S is a 4-Analog, 12-IP channel network digital video recorder. The WDR-516S can record
and display 4 analog video channels and 12 IP video channels simultaneously. Video, Audio, and Text
Event-Logs are digitized and stored on two internal hard-drives.
Key features
□ Expandable up to 16 channels (4 analog video channels + 12 IP video channels)
□ 1 channel audio recording & playback
□ Total 120 ips recording speed (Analogue video 60ips + IP video 60ips)
□ Total 120 ips display speed (Max 60ips over Network)
□ Built-in software multiplexer for all 16 live monitoring channels (1 / 4 / 9 / 13 / 16Ch Mode on
CCTV Monitor as well as PC)
□ Maximum 4TB storage capacity (IEEE 1394 for external HDD)
□ ATM/POS transaction information text recording and search with corresponding video
□ 4 pairs of sensor inputs and alarm outputs
□ Built-in hardware motion detection with search function (64-division comparison)
□ Various efficient back-up methods (IEEE 1394(FiWi), USB (V 1.1), Ethernet)
□ PTZ Control (Preset support) via RS 232 and RS 485/RS422
□ User-friendly 32bit True-colored Graphic OSD Menu
□ Dynamic IP (DHCP, Floating IP) support (when xDSL and Cable Modem are used)
□ IR remote controller (User controls PTZ with remote controller)
□ Remote Management Software (WDR Manager)
7
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Supplied Accessories
Unpack and check all the items as below.
1. WDR-516S (1)
2. DC Power Supply (1)
(110V~220V)
3. AC Power Cord (1)
4. CD-ROM (Including WDR Manager) (1)
5. Remote Controller (1)
6. Guide (2)
7. Plug Bracket (1)
8. HDD Fixing Screw (8)
8
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Description & Function
WDR-516S Front
1
3
6
4
2
5
(1) LED
(2) IEEE1394 connecter
(3) Remote controller receiver
(4) USB connecter
(5) Function buttons
(6) Bracket fixing hole for rack mount
9
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
WDR-516S Rear
10
11
9
7
8
12
13
14
15
19
20
18
17
16
(7) Power switch
(8) Ethernet connector
(9) BNC connector for Video input
(10) Audio input / output connector
(11) RS232 connecter (9Pin D-Sub)
(12) Terminal block for RS232 & 422/485
(13) Terminal block for Sensor input
(14) Terminal block for Relay output
(15) Video output for MONITOR or VCR
(16) Video input type/impedance select & remote controller switch
(17) IEEE1394 connecter
(18) USB connecter
(19) Power connector (DC12V)
(20) GND
10
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION AND CONNECTION
4. Connecting & Running WDR-516S
4.1. Connecting camera
(1) Connect CCTV camera to WDR-516S with BNC cable as shown below.
(2) Set video type (NTSC/PAL) by rear panel’s switch.
<Note>
The video type for all channels should be either NTSC or PAL. NTSC is the standard used in North
America.
(3) Set the impedance control switch for each channel as needed.
<Note>
It may be necessary to configure impedance of video input differently for each channel. For more
detailed information, please refer to “Video type / impedance setup switch” in Appendix #2.
CAMERA
REMOTE
CONTROL
N
ON
Hi-Z
1
2
3
4
P OFF
11
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2. Connecting Monitor
(1) Connect CCTV monitor to WDR-516S with BNC cable as shown below.
<Note>
WDR-516S has two video output ports ; for Monitor and VCR. The output signals from the two ports
are same and either port may be used.
4.3. Connecting Audio
(1) Connect audio signal to WDR-516S.
12
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
4.4. Supplying Power
(1) Connect power cable to WDR-516S.
(2) Turn on the power switch located on the WDR-516S rear panel.
<Note>
Use the plug bracket to secure the power cable if needed.
<Note>
To connect EARTH, refer to the following picture.
13
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Running OSD menu
5.1. Using menu
Press the [MENU] button to open the OSD Configuration Menu.
(1) Main Menu
(2) Sub-menu
(3) Setting Page
(4) Help message
(1) Main Menu Tabs: The selected tab is shown in blue and the related sub-menus will be shown below
the tab. To move to the previous/next Main Menu Tab, use the [◄ or ►] arrow buttons. To move to a
sub-menu, press the [ENTER] or [▼] buttons.
(2) Sub-menu: The selected sub-menu is shown in blue and the related setting page will be shown to the
right of the sub-menu. Use the [▲/▼] arrow buttons to move within the sub-menu list. To move to the
setting page press the [ENTER] button. To exit the setting page, press the [EXIT] button.
(3) Setting Page: The selected item is shown in gray. To move within each page, use the [◄ or ►] or
[▲/▼] arrow buttons. Press the [ENTER] button to change the value of a setting. When the setting value
is a word, a dialogue box to edit the word will open. When setting value is a number, it should be set with
using the [◄ or ►] or [▲/▼] arrow buttons. After the value is set, press the [EXIT] button. To exit the
Setting Page, press the [EXIT] button.
(4) Help message: Related information for each menu/setting will be displayed here.
14
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
5.2. Dialogue Box to Edit a Word
There are two methods to set word.
(1) Using number button
Enter the related numbers in order of horizontal/vertical. (For example, in order to select “ C ” , press
[3] and [2] buttons.)
(2) Using arrow button
Select a value using the [◄ or ►] or [▲/▼] buttons. The intersection of the horizontal and vertical bar is
selected value. Press the [►] button to confirm the selected value.
(3) Function word
The following symbols are for executing specific functions:
9
: Enter
: Back Space & delete
: Space
◄
►
: Move to left
: Move to right
: Previous Code Page
: Next Code Page
15
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Setting remote controller
6.1. Setting remote control DIP switch
Set the remote control DIP switch to “ON.”
REMOTE
CONTROL
N
ON
Hi-Z
3 4 P OFF
2
1
6.2. Set ID of WDR-516S
When controlling several WDR-516S with one remote controller, set Remote Control ID as follows.
(1) Press [MENU] button.
(2) Select “System” with using [►] button and press the [ENETR] or [▼] button.
16
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
(3) Select “Miscellaneous” from the sub-menu list using the [▼] button and press the [ENETR] button.
(4) Select “Remote Control ID,” and press the [ENETR] button.
(5) Select a value using the [◄ or ►] buttons and press the [EXIT] button.
(6) Press the [EXIT] button to exit the Settings Page and return to Monitor mode.
<Note> Remote Control ID
Up to 16 WDRs can be controlled with a single remote controller.
6.3. Selecting WDR-516S
If several WDRs are set with unique ID numbers, they can be controlled with one remote controller. To
select a specific WDR-516S, press the ID button of remote controller until the 8 LEDs on the front of the
WDR-516S light up and a buzzer sounds.
REC
A3
PLAY
A4
PWR
A1
NET
A2
Press repeatedly
till to select WDR
What you want
Unselected
Selected
REC
A3
PLAY
A4
PWR
A1
NET
A2
Remote Controller
All LED Blink One Time
<Note>
Because remote controller ID is sixteen, WDR will correspond.
17
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
6.4. Operable range of remote controller
WDR
6.5. Loading the batteries into remote controller
Remote controller requires two AAA-type batteries.
2. Taking care that the poles(+/-)
1. Remove the battery cover.
3. Replace the battery cover.
are correctly positioned.
18
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
7. WDR-516S Configuration
7.1. Basic Configuration
7.2. Advanced Configuration
19
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
7.3. External Storage & Backup Configuration
7.4. Internet/Intranet Configuration
WDR
20
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
8. WDR-516S Basic Setting
8.1. Viewing Image
After initial start-up, images from Ch.1~4 are displayed in a quad-split screen.
<Note>
If user password is set, a prompt for entering the password will appear.
21
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
8.2. Setting Date & Time
(1) Press [MENU] button, and select “Quick Setup” tab.
(2) Select “Date/Time” and enter the Settings Page by pressing [ENTER].
8.2.1. Time Zone
(1) Select “Time Zone” and press [ENETR] button to configure.
(2) Select a value using the [◄ or ►] button and press the [EXIT] button when finished.
8.2.2. Daylight Saving
(1) “Daylight Saving Time” is only activated for time zones that use Daylight Savings. If activated, press
[ENTER] to enter a new value.
(2) Select “On/Off” using the [◄ or ►] button and press the [EXIT] button when finished.
22
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
8.2.3. Time Format
(1) Select “Time Format” using the [◄ or ►] or the [▲/▼] buttons and press [ENTER].
(2) Two Time Formats are available; ‘MM/DD/YYYY’ and ‘YYYY/MM/DD’. Select a value using [▲/
▼] buttons, and press the [EXIT] button when finished. (Default value is ‘MM/DD/YYYY’.)
8.2.4. Date
(1) Select “Date” using the [◄ or ►] or the [▲/▼] buttons and press [ENTER].
(2) Select ‘MM’/‘DD’/‘YYYY’ using the [◄ or ►] buttons, and select the value using the [▲/▼]
buttons.
(3) Press the [EXIT] button when finished.
8.2.5. Time
(1) Select “Time” using the [◄ or ►] or the [▲/▼] buttons and press [ENTER].
(2) Select ‘HH’/‘MM’ using the [◄ or ►] buttons, and select the value using the [▲/▼] buttons.
(3) Press the [EXIT] button when finished.
8.2.6. Apply Date/Time
Most setting values are applied automatically, when exiting from the related menu page. But “Date”
& “Time” settings are not applied automatically because they may critically affect the file system of
the recorded HDD. To apply Date/Time settings confirm settings with [Apply Date/Time] button.
(1) Select “Apply Date/time” using the [◄ or ►] or the [▲/▼] buttons and press [ENTER]. A warning
message will appear.
(2) Select “OK” using the [◄ or ►] or the [▲/▼] buttons and press [ENTER]. To cancel, press the
[EXIT] button.
23
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
8.3. Setting Recording Condition
Recording conditions under the “Quick Setup” menu tab apply the same values to all analog channels 1~4.
All settings are applied for 24 hours/day regardless of the values set for “Time Schedule” or “Alarm Rec.”
24
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
(1) Press [MENU] button, and select “Quick Setup.”
(2) Move to sub-menu by pressing [ENTER] or the [▼] button.
(3) Select “Recording” using the [▲/▼] buttons and press the [ENTER] button.
8.3.1. Configuration Status
Displays the recording configuration status. When setting up through the “Quick Setup” menu, “Quick
Setup” will be shown. When setting up through “Normal Rec.” or “Alarm Rec.,” “Custom Setup” will be
shown.
<Note>
Only when all the 16 channels' normal recording conditions are set through 'Macro Setup' and
maintained, it is marked as 'Macro Setup'. Otherwise, it will be marked as 'Custom Setup'.
8.3.2. Channel Status
(1) Select “Channel Status” using [▲/▼] buttons and press the [ENTER] button.
(2) Select a value using the [◄ or ►] button. Press the [EXIT] button when finished.
8.3.3. Recording Speed/Quality
(1) Select “Recording Speed/Quality” using [▲/▼] buttons and press the [ENTER] button.
(2) Select a value using the [◄ or ►] button. Press the [EXIT] button when finished.
<Note> Recording Speed/Quality means
-
-
-
-
Low : Speed=1ips and Quality=Q5
Std. : Speed=5ips and Quality=Q5
High : Speed=15ips and Quality=Q5
Custom : Manually defined by User.
8.3.4. Speed(ips)
When “Recording Speed/Quality” is set as “Custom,” values can be set manually.
(1) Select “Speed” using [▲/▼] buttons and press the [ENTER] button.
(2) Select a value using the [◄ or ►] button. Press the [EXIT] button when finished.
25
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
8.3.5. Quality
When “Recording Speed/Quality” is set as “Custom,” values can be set manually.
(1) Select “Quality” using [▲/▼] buttons and press the [ENTER] button.
(2) Select a value using the [◄ or ►] button. Press the [EXIT] button when finished.
8.3.6. Audio Recording
(1) Select “Audio Recording” using [▲/▼] buttons and press the [ENTER] button.
(2) Select a value using the [◄ or ►] button. Press the [EXIT] button when finished.
8.3.7. Apply
(1) Select “Apply” using [▲/▼] buttons and press the [ENTER] button.
(2) Setting values are applied and the previous menu will be displayed.
26
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Connecting and Configuring Sensor
9.1. Connecting Sensor Input
To connect a sensor to S1, fix the wire to “S1” and “G“.
S1
G
<Note>
Devices connected to the sensor input should have “Dry contact.” The following diagram is of an
electric circuit with approximately 12mA flows.
27
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
9.2. Setting Sensor at OSD menu
After a sensor is connected, it can be activated through the OSD Configuration menu.
Select the sensor number (S1, S2, etc.) and press the [Enter] button to configure. Use the [◄ or ►]
buttons to select “On” or “Off.” Press [EXIT] when finished.
<NOTE>
When activated, the “Pre / Post Alarm” function will cause the WDR-516S to record images at the
specified Speed and Quality for a length of time before and/or after the sensor is triggered.
28
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
10.Connecting & Configuring Relay Out
10.1.Connecting Relay Out
WDR-516S has total four ports of Relay Out.
To connect a device to “R1,” connect the wires to two “R1”s.
R1
R1
<Note>
The rated voltage and current of Relay Out are as follows. Do not exceed the rated values.
24V DC, 1.25A, 30W
Maximum Switching Capacity
125V DC, 0.24A, 30W
125V AC, 0.5A, 62.5VA
29
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
10.2.Configuring Relay Out
Each relay can be synchronized with a sensor input or with motion detection for each of the four time sch
edules (Weekday (Day), Weekday (Night), Weekend (Day), Weekend (Night)). Relays can also be control
led locally by pressing the [SEARCH/RELAY] button followed by the relay number (1-
4). Relays can also be controlled remotely through the “WDR Manager S/W.”
30
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
11.Connecting External Device with Serial Port
11.1.Connecting Text Input Device (ATM / POS / Access Control)
In addition to images, the WDR-516S can record text data received from POS/ATM through the RS232
serial port.
Connect RS232 to 9pin D-sub of WDR-516S, and configure the “Text” sub-menu under the “System” tab.
Set “Serial Setup” under the “System” menu tab to “RS232” and “Device” to “Text.” The baud rate may d
iffer for each device; consult the device manual for more information.
<Note>
Before installing any external device, consult with the local DENTEC distributor. Some external
devices may not be compatible with the WDR-516S.
31
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
12.Connecting & Configuring Serial Ports for Pan/Tilt/Zoom
12.1.Connecting Serial Port
The WDR-516S has most major PTZ protocols already pre-programmed. Makes and models not
supported can still be controlled using the Transparent Protocol. For a list of supported protocols, refer to
the list on the OSD Configuration menu.
12.1.1. Connecting RS232
Fix the wire to 1~3 pins (RX, TX, GND).
GN
TXD
RXD
12.1.2. Connecting RS485
Fix the wire to 4~5 pins and 8 pin (R+, R-,GND).
GND
R+ R-
12.1.3. Connecting RS422
Fix the wire to 4~8 pins (R+, R-, T+, T-, GND).
GND
T-
T+
R-
R+
32
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
12.2.Configuring Serial Port
Configure PTZ serial ports and available modes at “System / Serial Setup”.
After completing serial setup, configure base address and port for each channel under the “Camera” menu
tab. When connecting PTZ devices to several cameras, be sure the base address matches the address for
the camera.
33
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
<Note> Wire Handling
Trimming Wire
When connecting a wire to a terminal block, follow the instructions below. Note the different types of
wire that can be used.
Stranded Wire: Peel off the wiring cover
8~10mm and solder it. Wire gage should be
AWG 22 ~ 26.
Solid Wire: Peel off the wiring cover 8~10mm
and solder it. Wire gage should be AWG 20 ~
26.
Inserting & removing wire
To insert the wire, use a screwdriver as
shown in the diagram to the right.
13.Connecting USB Device
USB port can be used to copy up to 1 minute of images to a USB Flash memory disk. When connecting
USB device, do not exceed the rated values of USB device.
USB Spec.
Ver 1.1 (Max 12M bps)
USB Memory Stick,
Available Device
Output Voltage/Current
Max. 200mA per DC 5V / Port
<Note>
The disk should be formatted with FAT32 type.
34
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
If properly connected, the disk is recognized automatically as in the following picture. To copy images,
the process is as follows: Set copy range (up to 1 minute) Æ Select drive Æ Copy (press “Start”).
<Note>
USB Flash products that require a Windows program to operate may not be recognized by the WDR-
516S.
35
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
14.Connecting External Storage
14.1.IEEE1394 Bay
WDR-516S has three IEEE1394 ports for external storage device interface. With them, WDR-516S can
expand storage capacity up to 4TB.
<Note>
Some IEEE1394 Bay may not be recognized by the WDR-516S. Before purchasing, consult the local
DENTEC distributor.
14.2.Connecting IEEE1394 Device
When using FireWire supported external HDD, hard drive bays can be connected to 1 port in the front
panel or 2 ports in the rear panel. The WDR-516S does not supply power to the hard drive bay; therefore
only bays that use external power can be used.
14.3.Available HDD
It is recommended to use the following HDD models with the WDR-516S. If a non-recommended HDD
is used, DENTEC Corp. will not guarantee the warranty.
Manufacturer : MAXTOR
Series
Model No.
6Y060L0
Size
Series
Model No.
4R060L0
4R080L0
4R120L0
4R160L0
Size
60GB
60GB
80GB
120GB
160GB
6Y080L(P)0
6Y120L(P)0
6Y160L(P)0
6Y200P0
80GB
DiamondMax
Plus 9
DiamondMax
16
120GB
160GB
200GB
250GB
(7200rpm)
(5400rpm)
6Y250P0
<Note>
Buffer for DiamondMax Plus 9’s model “L” is 2MB; for model “P” the buffer is 8MB.
36
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
14.4.Registering & Formatting HDD
“Disk Manager” will automatically run on start-up after installing a HDD.
If “Disk Manager” does not automatically run on start-up, make sure the HDD is properly installed.
(1) Press [ENTER] button at “Select Disk”.
(2) Select new added HDD (indicated as “[F]”) using [▲/▼] button and press [EXIT] button
(3) Select “Action” using [▲/▼] button and press [EXIT] button.
(4) Select “Add” using [◄ or ►] button and press [EXIT] button.
(5) Select “Apply” using [▲/▼] button and press [EXIT] button. The HDD status is changed to “[*]”.
(6) Select “Action” using [▲/▼] button and press [EXIT] button.
(7) Select “Format” using [◄ or ►] button and press [EXIT] button.
37
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
(8) Select “Apply” using [▲/▼] button and press [EXIT] button. The HDD status is changed to “[R]”
after formatting.
(9) Shut down “Disk Manager” by pressing [EXIT] button.
15.Network Monitoring & Managing
WDR-516S can be accessed, controlled, and managed from remote site via Internet/Intranet.
15.1.Connecting Ethernet
1) Turn off WDR-516S’s power switch.
2) Connect WDR-516S to hub with Ethernet cable.
3) Turn on WDR-516S’s power switch.
<Note>
1. Supply power to WDR-516S after connecting Ethernet cable to protect against electrical damage to
WDR-516S.
2. Check cable connection status.
3. Check LED on WDR-516S’s rear panel after supplying power.
38
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
15.2.Configuring WDR-516S’s Network Information
The following description is on based on Ethernet connection. For more detailed information on the
Network Settings Page, please refer to “WDR-516S OSD User’s Guide”.
(1) Press [MENU] button.
(2) Select “System” using the [◄ or ►] buttons and press [ENTER].
(3) Select “Network” using the [▲/▼] buttons and press [ENTER].
(4) Select “IP Addr” using the [▲/▼] buttons and press [ENTER].
(5) Press [EXIT] button after entering IP address in the dialogue box.
(6) Select “Net Mask” using the [▲/▼] buttons and press [ENTER].
(7) Press [EXIT] button after entering Net Mask in the dialogue box.
(8) Select “Gateway” using the [▲/▼] buttons and press [ENTER].
(9) Press [EXIT] button after entering Gateway in the dialogue box.
(10) Select “DNS” using the [▲/▼] buttons and press [ENTER].
(11) Press [EXIT] button after entering DNS in the dialogue box.
(12) Press [EXIT] button to exit the page.
39
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
16.Using WDR Manager
16.1.PC System Requirements for running WDR Manager
Minimal Requirements
P-Ⅲ 600MHz or above
128 MB or above
Recommended Requirements
CPU
P-Ⅲ 1GHz or above
256 MB or above
RAM
VGA
16 MB or above
32 MB or above
OS
Windows 2000/XP
Windows 2000/XP
Resolution
Network
1024 X 768 pixels or above
100 Base TX Fast Ethernet
1024 X 768 pixels or above
100 Base TX Fast Ethernet
16.1.1. Installing WDR Manager
(1) Insert Setup CD-ROM into CD-ROM drive of administrator’s PC
(2) Doubleclick the WDR Manager setup file. Install Shield Wizard will be automatically installed.
(3) Click the “I Agree” button to accept the license agreement
40
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
(4) Select which components to install and press the “Next” button.
(5) Browse and choose a directory if the default directory is not preferred. Click the “Install” button, after
selecting a directory to install.
(6) Click the “Close” button after WDR Manager program is installed successfully
41
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
16.1.2. Uninstalling WDR Manager
(1) Click Windows “Start” Button.
(2) Select and Click ‘Uninstall’ icon to run Uninstall Shield.
(3) WDR Manager program will be automatically deleted.
16.2.Configstation
Click icon on desktop to run “WDR Manager Configstation” program.
42
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
16.3.Monitor
Click the related icon and run the “WDR Manager Monitor” program.
16.4.Playback
Click the related icon and run the “WDR Manager Playback” program.
43
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
APPENDIX
44
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix #1 Installing and Replacing internal HDD
Compatible HDD
It is recommended to use the following HDD models with the WDR-516S. If a non-recommended
HDD is used, DENTEC Corp. will not guarantee the warranty.
Manufacturer : MAXTOR
Series
Model No.
6Y060L0
Size
Series
Model No.
4R060L0
4R080L0
4R120L0
4R160L0
Size
60GB
60GB
80GB
120GB
160GB
6Y080L(P)0
6Y120L(P)0
6Y160L(P)0
6Y200P0
80GB
DiamondMax
Plus 9
DiamondMax
16
120GB
160GB
200GB
250GB
(7200rpm)
(5400rpm)
6Y250P0
<Note>
L series of DiamondMax Plus 9 has 2MB buffer memory, while P model has 8MB
Installing & Replacing
Adding or replacing HDD should follow below process
(1) Turn off the power of WDR-516S.
(2) Check whether the dip switches are set as illustrated below
45
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
<Note>
The dip switch should be set at ‘MASTER’ position for the first installed or built-in HDD.
Additional HDD should be set as ‘SLAVE.’ Identical dip switch setting may cause system conflict
or mal-function.
(3) Remove the 6 screws as illustrated below and pull up the cover from the rear part to open
SCREW
6EA
TOP
COVER
(4) Take out power and data cable of HDD from Main PCB ASS’Y. Remove 4 HDD Bracket screws and
take out HDD ASS’Y.
HDD POWER
CABLE
SCREW
4EA
MAIN PCB
ASS’Y
HDD CABLE
46
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
(5) Fix the HDD with provided screws. Connect power and data cables to HDD
MASTER HDD
SLAVE HDD
HDD POWER
CONNECTOR
HDD FIXING
SCREW 4EA
HDD FIXING
SCREW 4EA
HDD POWER
CONNECTOR
Installing single HDD
Installing 2 HDDs
<Note> Caution for HDD Management
1. Replacing ‘SLAVE’ HDD of internal 2 HDDs causes permanent data loss in the SLAVE HDD.
2. MASTER HDD has all the index of stored data including ‘SLAVE’ HDD. Corruption on ‘MASTER’
HDD may cause total data loss. Be careful when handling the main HDD.
3. It is strongly recommended that MASTER HDD should be backed up before replacing
(6) Connect HDD power cable to main PCB ASS’Y. Secure the HDD with screws.
HDD POWER
CONNECTOR
MAIN PCB
ASS’Y
ASSEMBLED
HDD
(7) Connect HDD cable’s connector to HDD as in the following picture.
47
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
HDD
CABLE
(8) Assemble the top cover.
Registering & Formatting HDD
“Disk Manager” will automatically run on start-up after installing a HDD. If “Disk Manager” does not
automatically run on start-up, make sure the HDD is properly installed.
(9) Press [ENTER] button at “Select Disk”.
(10) Select new added HDD (indicated as “[F]”) using [▲/▼] button and press [EXIT] button
48
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
(11) Select “Action” using [▲/▼] button and press [EXIT] button.
(12) Select “Add” using [◄ or ►] button and press [EXIT] button.
(13) Select “Apply” using [▲/▼] button and press [EXIT] button. The HDD status is changed to “[*]”.
(14) Select “Action” using [▲/▼] button and press [EXIT] button.
(15) Select “Format” using [◄ or ►] button and press [EXIT] button.
(16) Select “Apply” using [▲/▼] button and press [EXIT] button. The HDD status is changed to “[R]”
after formatting.
(17) Shut down “Disk Manager” by pressing [EXIT] button.
<Note> HDD Type at Disk Manager
1. Available of recording
2. [V] Connected and formatted as WDR-516S’s file system
If using ‘Add used’ command, it will be changed to [R]. There is no need to reformat.
3. [F] Connected but not available file system. After using ‘Add’, need to format for making as [R].
4. [*] Connected and added using the ‘ADD’ command. If formatting, it will be [R].
5. [X] HDD cable is not
<Note> HDD Managing Command
1. Format : Format as WDR-516S’s file system. Not available to PC file system.
2. Add : Add HDD for recording. Need to format.
3. Add Used : Add a HDD that has been used and formatted. There is no need to reformat
4. Remove : Remove current HDD. HDD can be reused without data loss by the ‘Add Used’
command.
5. Confirm Removed : Used when a removed HDD is still listed. ALL DATA WILL BE LOST!
<Note> How to format current HDD?
WDR-516S doesn’t need additional format command. Just do it; ‘Remove’ Æ ‘Add’ Æ ‘Format’.
49
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix #2 Video Input
Video type / impedance setup switch
It’s possible to set up Impedance of Video input line.
When one Video output is connected to several Input as below, the impedance of one input should be 75
ohm.
REMOTE
CONTROL
N
ON
Hi-Z
2 3 4 P OFF
1
50
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix #3 Using CD-ROM
Components of CD- ROM disc
Installation Guide
User’s Guide
: WDR-516S Installation Guide
: WDR-516S User’s Guide
: WDR Manager User’s Guide
WDR Manager
( WDR-516S Remote Management Program)
Preparation
To read manual of CD-ROM disc, Adobe Acrobat 5.0 should be installed in client’s PC.
Reading manual of CD-ROM
Follow the steps to read user’s guide.
1. Insert the supplied CD-ROM into CD-ROM drive of PC.
2. Open the user’s guide, PDF file.
51
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix #4 Specification
General
CPU
32bit RISC Processor (200MIPS)
Flash Memory
Main Memory
OS
8MB
64MB
Embedded LINUX
Video Channel
Storage Device
4 Analog Channel & 12 IP Video Channel (NTSC or PAL)
Internal 3.5” IDE HDD 2EA
External 3EA for IEEE1394 Interface
Support Max. 4Tbytes
Intelligent File System
Data-loss protection against power failure
Image Compression
Technology
Differential Wavelet
Average File Size
1~5KB (Standard Quality)
Image Quality Level
Image Compression Rate
Recording Speed
5 Level
20:1~500:1
Max. 120ips in total at NTSC (Analog Ch 60ips + IP Video Ch
60ips)
Network
Browser
WDR Manager
Protocol
TCP/IP, ARP, ICMP, DHCP, PPPoE
10/100Mbps Ethernet (RJ-45)
Firmware upgrade via Network
Monitoring : Max. 5 Users
Connector
S/W Upgrade
Simultaneous Users
Playback : Max. 5 Users
Security
Password (User or Administrator Authentication)
Watermarking (Against image forging)
52
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
Display
Monitoring
Max. 120ips (Analog Video 60ips)
(IP Video 60ips)
Viewer
1ch, 4ch, 9ch, 13ch, 16ch, Auto Sequential
Max. 60ips
Playback Performance
Playback Speed
Function
1x, 2x, 4x, 8x, 16x (Forward & Reverse Play)
Step-Forward, Step-Reverse
Environment
Operation Temperature
Storage Temperature
Operation Humidity
Storage Humidity
5~45 Cº
-10~55 Cº
30~80%, free of condensation
93% below, free of condensation
Data Backup/Expansion/Copy
HDD Expandable Data Backup
Analogue VCR
IEEE1394
VHS Video output for VCR
Daily / Weekly / Monthly
USB Flash memory disk
Backup Reminder
Data Copy
Input/Output
Video
1 Monitor output via BNC
1 Video output via BNC
Audio
1 Input : Line-in, 1 Vpp
1 Output : Line-out, 1Vpp
Level : -7~8(16 Step) Recording level
AMP : 20dB amplifier for low level audio
Monitoring : Local and remote
4 Relay outputs (Max DC 30W, AC 62.5VA)
Daily : Day / Night
Digital Output
Digital Output Schedule
Weekly : Weekdays / Weekends
Conditions : MD, Sensor inputs
4 Sensor inputs (Support Dry contact)
Sensor Input
53
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
PTZ Control
Serial Port
RS232(1), RS485/422(1), RS232(1)
Front panel button & IR remote controller
(control IP video channel as well)
On-the-screen PTZ control on PC
16 points preset per channel
Control Method (Local)
Control Method (Remote)
Preset Mode
Others
Digital Zoom
2x (Live & PlayBack Mode)
Motion Detection or Sensor input
Alarm triggered Video Data Preservation
Log search
Alarm Trigger
Alarm Data Preservation
Alarm Log
Log monitoring via OSD & Network
Pre : 1~10 seconds
Pre/Post Alarm
Post : 1~60 seconds
Schedule Recording
Daily : Day / Night
Weekly : Weekdays / Weekends
Conditions : Normal / Event
POS/ATM transaction information archived along with
corresponding video data
Text Data Recording
Electricity
Power (Applied Adaptor)
DC 12V
Consumption Current
Consumption Voltage
Max 4.5A (Internal 2 HDD)
Typical 2.9A (Internal 2 HDD)
Max. 54W
Typical 35W
55
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
Mechanical
Dimension (WⅹDⅹH)
350ⅹ298ⅹ66(mm)
Weight
3.5Kg (With one HDD)
RS-232
POWER
AUDIO
IN
VIDEO
VIDEO
INPUT
ETHERNET
10/100
OUTPUT
CH1
CH2
MON
REMOTE
COMM.
CONTROL
DC12V
RELAY OUT
SENSOR IN
N
ON
IEEE 1394
Hi-Z
T
X
R
X
T
T
+
R
R
1
2
3
4
R1 R2 R3 R4
OUT
_
_
+
VCR
CH3
CH4
1
2
USB1
USB2
1
2
3
4
P
OFF
RS232 RS422/485
Network Matrix DVR
PWR
A1
NET
A2
REC
A3
PLAY
A4
SEARCH
RELAY
/
SEQ
7
MULTI SELECT
ZOOM
0
MENU
HELP
PAUSE
USB
IEEE1394
9
1
2
3
4
5
6
8
10+
ENTER
STOP
WDR- 516S
55
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
Model：
WDR-516S
Warranty：
Full 1 year as of invoice shipping date
Manufacture ：DENTEC CORP.
Email:
Address：
8/F, No. 116 Hou-Kang St. Shih-Lin Dist,
Taipei, Taiwan
56
WDR-516S Installation Guide
Rev 1.0(93/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Kyocera Cell Phone K132 User Manual
Kyocera Printer DP 3600 User Manual
Magnavox CRT Television TS 2775 User Manual
Makita Cordless Saw JR14ODWA User Manual
Makita Drill 6304L User Manual
Manitowoc Ice Ice Maker K058 User Manual
Marmitek Universal Remote 22328 User Manual
McCulloch Chainsaw 41BY44NQ077 User Manual
Memorex TV VCR Combo MVT2197 User Manual
Middleby Cooking Systems Group Oven UB E4T User Manual