XT4861
14 INCH
COLOR MONITOR
USER'S
MANUAL
Features:
• 1024 x 768, Non-Interlaced
• .28 mm Dot Pitch
• 72 Hz Refresh Rate (VGA/SVGA)
• Power Saving Operation (VESA DPMS)
• Full Screen Display
• Easy Access Front Controls
• Unlimited Palette of Colors
• Plug and Play
Part #MAN098 Rev 1.0
AX14PNP
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 1 - General Information
Congratulations on purchasing the 14 inch Color Monitor. The monitor
uses one of the finest CRTs available in the industry. The .28 mm dot pitch
non-glare tube and a crisp, vivid color display with an 80 MHz video
bandwidth, make it the perfect monitor for applications ranging from
business presentations to desktop publishing.
The monitor is capable of video resolutions including VGA, Super VGA,
and XGA.
The monitor is compatible with display adapters using VGA, SVGA, and
XGA. It operates at resolutions ranging from 640 x 350 to 1024 x 768 with
unlimited colors. The monitor is PnP (Plug and Play) compliant to simplify
setup and configuration in Windows 95 or other PNP operating systems.
1.1 Precautions When Using the Monitor
When setting up and using your monitor, pay special attention to the
following:
• To eliminate eye fatigue, do not use your monitor against a bright
background or where sunlight or other light sources will shine directly
on the monitor.
• Your monitor should be placed just below eye level for optimum
viewing.
• Allow adequate ventilation around the monitor so that heat from the
monitor can properly dissipate.
• Neither the monitor itself nor any other heavy object should rest on the
power cord. Damage to a power cord can cause fire or electrical
shock.
• Keep the monitor away from high capacity transformers, electric
motors and other strong magnetic fields.
• Do not use your monitor in a damp, dusty or dirty area.
• Handle the monitor with care when transporting.
• Unplug the monitor during electrical storms
1.2 Power Saving Modes
VESA Display Power Management Signaling (DPMS) defines a method
for a computer to signal the monitor to reduce its power consumption when
idle. DPMS features must be supported by both the computer and the
monitor. The monitor supports DPMS “STANDBY” and “OFF” modes.
Computer support of DPMS requires the use of a DPMS compliant video
card driver.
The monitor enters DPMS STANDBY mode when the computer turns off
the Horizontal Synchronization signal. This power-saving mode reduces
the monitor’s power consumption to 15W. When the synchronization
2
Download from Www.Somanuals.com. All Manuals Search And Download.
signal is re-enabled the monitor returns to normal operation.
The monitor enters DPMS OFF mode when the computer turns off both the
Horizontal and Vertical Synchronization signals. This mode reduces the
monitor’s power consumption to 3W. When the synchronization signals
are re-enabled the monitor returns to normal operation.
Section 2 - Installation
2.1 Attaching the Base
Figure 2-1 Connecting the Base
• Carefully place the monitor on
its side or top.
• Insert the hooks on the swivel
base into the slots in the bot-
tomofthemonitor. Pushdown
and forward on the base until
the it snaps into place.
• Place the display upright in an
appropriate location.
2.2 Connecting the Cable
· Plug the 15-pin male connector on the video cable into the output
Figure 2-2 Monitor Connections
Expansionboards
COM1
COM2
LPT1
VIDEO
3
Download from Www.Somanuals.com. All Manuals Search And Download.
connector on the rear of your computer system. The video output
connector on your computer may be either in a location similar to
Figure 2-2 or on an expansion board. Secure the cable to the
computer using the thumbscrews on the 15-pin connector.
· Attach the power cord to the monitor and plug it into an AC outlet.
· The monitor is now ready for use.
Section 3 - Monitor Controls and LEDs
Figure 3-1 Controls and LEDs
A
B
1
2
3
4
5
6
7
8
9
10
1. Power Indicators: LEDs A and B indicate the state of the Monitor.
•
•
•
LED A On (green) Normal operations.
LED A flashing DPMS “STAND-BY” mode.
LED B On (orange) DPMS “OFF” mode.
2. Power Switch:Push to turn the monitor ON, push again to turn the
monitor OFF.
3. Trapezoid: Adjusts the angle of the sides of the display to make the
display rectangular.
4. Pincushion Adjusts the curvature of the sides of the display to make
the sides straight.
5. Vertical-Position: Adjusts the vertical position
6. Vertical-Size: Adjusts the display height
7. Horizontal-Position :Adjusts the horizontal position
8. Horizontal-Size: Adjusts the display width.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Brightness Control: Adjusts the display brightness. Turn clockwise
to increase the brightness.
10. Contrast Control: Adjusts the contrast. Turn clockwise to increase
the contrast.
Section 4 - Troubleshooting
No picture, power indicators A, and B off
• Check AC cord is plugged into outlet and monitor.
• Turn on the power switch.
No picture, power indicator A on.
• Check that video cable is connected completely.
• Adjust brightness and contrast controls.
• Turn the computer on.
No picture, power indicator A flashing.
• Monitor is in DPMS “STAND-BY” mode. Press a key or move the
mouse.
No picture, power indicator B on.
• Monitor is in DPMS “OFF” mode. Press a key or move the mouse.
Image is not centered
• Adjust Vertical Position and Horizontal Position controls.
Appendix A - Specifications
Picture Tube
Size
Dot pitch
14-inch diagonal
0.28mm
Bandwidth
Data Area
80 MHz
9.84 in. x 7.28 in.
Display modes
Mode
Resolution
V. Frequency H. Frequency
VGA
VGA
VGA
VGA
SVGA
SVGA
SVGA
640 x 350
640 x 400
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
70 Hz
70 Hz
60 Hz
72Hz
56 Hz
60 Hz
72 Hz
31.47KHz
31.47 KHz
31.47 KHz
37.86 KHz
35.16 KHz
38.00KHz
48.08 KHz
5
Download from Www.Somanuals.com. All Manuals Search And Download.
8514A
Ultra VGA
1024 x 768
1024 x 768
87 Hz
60 Hz
35.52 KHz
48.36 KHz
Front controls
Power, Brightness, Contrast, Horizontal-Size, Hori-
zontal-Position, Vertical-Size, Vertical-Position,
Pincushion, Trapezoid
Power saving
Display Power Management Signaling (DPMS)
STAND-BY mode 15W (Max.)
OFF mode
3W (Max.)
Plug and Play
Input voltage
DDC1, DDC2B
110~240VAC, 50/60 Hz
Operating
Environment
Temperature
Humidity
0°~35°C
30~80%
Connector
15 Pin D-Sub
Dimensions
13.78 in. W x 14.25 in. H x 14.64 in. D
Specifications subject to change without notice.
Appendix B - Video Cable Pinout
Figure B-1 Pin
Layout and Pin
AssignmentChart
PIN SIGNAL
PIN SIGNAL
No Pin
1
2
3
4
5
6
7
8
Red
9
Green
10 Ground
Blue
11 Ground
No Pin
12 SDA
Ground
Red Return
Green Return
Blue Return
13 Hor. Synch.
14 Vert. Synch
15 Data Clock (SCL)
Appendix C - Three Year Warranty
MAXTECH warrants to the original buyer of this product against defects
in material and workmanship for three years from the date of purchase.
Except as specified below, this warranty covers all defects in material or
workmanship in this product. The following are not covered by the
6
Download from Www.Somanuals.com. All Manuals Search And Download.
warranty:
1.Any product which is not distributed in North America by MAXTECH
or which is not purchased in North America from an authorized
MAXTECH Dealer.
2.Any product on which the serial number has been defaced, modified
or removed.
3.Damage, deterioration or malfunction resulting from:
a.Accident, misuse, abuse, neglect, fire, water, lightning or other acts
of nature, commercial or industrial use, unauthorized product
modification, or failure to follow instructions supplied with the
product.
b.Repair or attempted repair by anyone not authorized by MAXTECH.
c. Any shipment of the product (claims must be presented to the
carrier).
d.Removal or installation of the product.
e. Any other cause which does not relate to a product defect.
4.Cartons, carrying cases, batteries, external cabinets, magnetic tapes
or any accessories used in connection with the product.
MAXTECH will pay all labor and material expenses for covered items, but
we will not pay for the following:
1.Removal or installation charges.
2.Costs of initial technical adjustments (set-up), including adjustment
of user controls.
3.Payment of shipping charges.
HOW TO OBTAIN WARRANTY SERVICE
In the event the product requires service, call the MaxTech Service Center
at (562) 921-4438 between 9:00 a.m. and 6:00 p.m. (PST Monday through
Friday). When you are instructed by the Technical Support Representative
to return the product to MaxTech for repair, you will be given an RMA
(Return Merchandise Authorization) number. You must have an RMA
Number to return the product for service. Use the following procedure
to return the product to MaxTech:
1. Return the product in its original package and packing (if possible).
2. Be sure to include your name, address, day-time telephone num-
ber, RMA number, and a brief description of the problem (also
enclose a check for out-of-warranty repair).
3. After wrapping the package securely for shipping, print your name,
return address and the RMA # clearly on the outside of your
package.
4. Ship the unit prepaid via UPS or the U.S. Postal Service to the
address provided by the technician when you call. We recommend
that the unit be insured.
This warranty is valid for products sold in North America only. Contact your
local authorized distributor or dealer for the warranty offered in other
areas.
All warranty services must be performed by Authorized Service Centers.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
There are no user serviceable parts inside the unit. Do not remove any
components or attempt to service the unit by any unauthorized service
center. This warranty is voided if the product has been abused, misused,
modified, or repaired by an unauthorized service center.
LIMITATION OF IMPLIED WARRANTIES
All implied warranties, including warranties of merchantability and fitness
for a particular purpose, are limited in duration to the length of this
warranty.
EXCLUSION OF DAMAGES
MAXTECH'S liability for any defective product is limited to the repair or
replacement of the product, at our option. MAXTECH shall not be liable for:
1. Damage to other property caused by any defects in this product,
damages based upon inconvenience, loss of use of the product, loss
of time, commercial loss; or
2. Any other damages, whether incidental, consequential or otherwise.
Some states do not allow limitations on how long an implied warranty lasts
and/or do not allow the exclusion or limitation of incidental or consequen-
tial damages, so the above limitations and exclusions may not apply to
you.
HOW STATE LAW RELATES TO THE WARRANTY
This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
Appendix D - Notices
FCC Class B Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment generates, uses and can
radiate radio frequency energy, and if not installed and used in accordance
with the instructions, may cause harmful interference to radio communi-
cations. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected
• Consult the dealer or an experienced radio / TV technician for help
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Notice: Shielded cables, if any, must be used in order to comply with the
emission limits. Any change or modification not expressly approved by the
Grantee of the equipment authorization could void the user’s authority to
operate the equipment.
Canadian DOC Compliance Statement
This equipment does not exceed Class B limits for radio noise emissions
for a digital apparatus, set out in the Radio Interference Regulations of the
Canadian Department of Communications. Operation in a residential area
may cause unacceptable interference to radio and TV reception requiring
the owner or operator to take whatever steps necessary to correct the
interference.
Cet équipement ne dépasse pas les limits de Class B d'émission de bruits
radioélectriques pour les appareils numériques, telles que prescrites par
le Règlement sur le brouillage radioélectrique établi par le ministère des
Communications du Canada. L'exploitation faite en milieu résidentiel peut
entraîner le propriétaire ou l'opérateur à prendre dispositions nécessaires
pour en éliminer les causes.
Disclaimer, Copyright, And Other Notices
The information contained in this manual has been validated at the time
of this manual's production. The manufacturer reserves the right to make
any changes and improvements in the product described in this manual
at any time and without notice. Consequently, the manufacturer assumes
no liability for damages incurred directly or indirectly from errors, omis-
sions or discrepancies between the product and the manual.
All registered trademarks are the property of their respective owners.
Copyright © 1997 MAXTECH. All rights reserved. No reproduction of this
documentinanyformisallowedwithoutwrittenpermissionfromMAXTECH.
First Edition
GZ/DR - Version 1.0
9
Download from Www.Somanuals.com. All Manuals Search And Download.
|