MA6.8Q
High power amplifier
features
Q
Uncompromised sound quality
Integrated CAT-5 based monitoring and
control system
Q
Q
Q
Q
Q
Q
Patented Class TD Topology
Regulated Switch Mode PSU
Voltage and Current Limiters
Over-Temperature and Fuse Protection
Four Discrete Channels
technical specifications
MAX OUTPUT POWER
16Ω PER CHANNEL
8Ω PER CHANNEL
4Ω PER CHANNEL
Hi-Z: 70/100V
Four Channels
650 W
1200 W
1700 W
1600 W
applications
Q
Q
Q
Q
Q
Q
Churches
Theatres
Clubs
Theme Parks
Arenas
MAX OUTPUT VOLTAGE
PER CHANNEL
DISTORTION
THD 20Hz – 20kHz FOR 1W
THD AT 1kHz AND –1dB BELOW CLIP 0.05%
SIGNAL TO NOISE RATIO
CHANNEL SEPARATION @ 1kHz
FREQUENCY RESPONSE +0/-3dB
INPUTS
100 Vrms
0.1%
112dBA
70dB
6.8Hz – 34kHz
Stadiums
GAIN SELECTABLE (dB)
DEFAULT GAIN
FRONT PANEL
23, 26, 29, 32, 35, 38, 41, 44
35dB
Housed in a convenient 2U package, the MA6.8Q 4-channel amplifier
allows for the adjustment of maximum voltage peak, gain adjustment
and has on-board network capability for monitoring and control. With
these features it is now possible to specify identical amplifiers in an
installation and then adjust each output to the very specific requirements
of the speaker system. A typical large-scale system is a combination of
high-powered speakers, full range in-fill speakers, 70/100V ceiling
speakers, with an active speaker management system. With switchable
outputs and on-board network capabilities, the MA6.8Q can be
designed into a complete value engineered system handling all
amplification tasks.
GAIN CONTROLS
21 position detent
INDICATORS: (common)
NomadLink® Network connected
Power Average Limiter
Power On
Option Card (on)
FRONT PANEL INDICATORS: (per channel)
Signal present / Hi impedance warning
-10dB and –4dB output signal present
Voltage Peak Limiter (VPL) clipping
Current Peak Limiter (CPL) active
Very High Frequency (VHF) warning
High Temperature warning
Fault warning
Blue LED
Red LED
Green LED
Yellow LED
Green/Red LED
2 x Green LED
Red LED
Orange LED
Yellow LED
Yellow LED
2 x Yellow LED
2 x Yellow LED
overall dimensions
Mute
REAR PANEL
INPUT CONNECTORS
OUTPUT CONNECTORS
POWER
3-pin Phoenix, electronically balanced
Barrier strip 2-pole screw terminals
OPERATION VOLTAGE
MINIMUM POWER-UP VOLTAGE 230V / 115V
POWER AVERAGE LIMITER
SOFT START / INRUSH CURRENT DRAW
DIMENSIONS
130-265 V / 65-135 V
171V / 85V
Yes
Yes / max 5A
WIDTH
HEIGHT
DEPTH
WEIGHT
483mm (19ins)
88mm (3.5ins) 2U
343mm (13.5ins)
12kg (26.4lbs)
Century Point, Halifax Road, Cressex Business Park,
High Wycombe, Buckinghamshire HP12 3SL, England.
Telephone: +44 (0)1494 535312 Facsimile: +44 (0)1494 438669
E-mail: [email protected]
All information is Copyright © 2007 Martin Audio Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
|