10
Switch Settings, Adjustments and Indicators
Marshall Electronics
1910 East Maple Ave.
El Segundo, CA 90245
Tel.: 800-800-6608 • 310-333-0606
Fax: 310-333-0688
Email: [email protected]
Tally Lights
V-R10411DP-TE // V-R100442DP-TE
User’s Guide
Power
Brightness, Color,
and Contrast controls
RATIO: Each push of the button switches
between 4:3 and 16:9 modes
RATIO Settings
MARK (16:9 mode only):
Each push of the button switches
between 16:9 standard, 4:3 marker
(shaded), and 4:3 marker (cropped)
4:3 Mode
16:9 Mode
Product Overview
Features
1
2
MARK Settings (16:9 Mode Only)
Standard Accessories
Optional Accessories
Electrical Specifications
Mechanical Specifications
Faceplate Cleaning
Operational Setup
3
4
5
6
Standard
4:3 Marker (Shaded)
4:3 Marker (Cropped)
11
Warranty
7
8
9
10
11
Marshall Electronics warranties to the first consumer, that this V-R1041DP-TE / V-R1042DP-TE portable monitor will, under normal use,
be free from defects in workmanship and materials, when received in its original container, for a period of one year from the purchase date.
This warranty is extended to the first consumer only and proof of purchase is necessary to honor the warranty. If there is no proof of pur-
chase provided with a warranty claim, Marshall Electronics reserves the right, not to honor the warranty set forth above. Therefore, labor and
parts may be charged to you.
This warranty does not apply to product exterior and cosmetics. Misuse, abnormal service or handling, improper alterations or modifications
in design or construction, voids this warranty. No sales personnel of the seller, nor any other person is authorized to make any warranties
other than those described above, or to extend the duration of any warranties on behalf of Marshall Electronics, beyond the time period
described above.
Input Connectors
Switch Settings, Adjustments and Indicators
Warranty
Due to constant effort to improve products and product features, specifications may change without notice.
12/14/2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Accessories (continued)
Uses 2 Sony DVCam/HDV FP-Type batteries.
When used with monitor power supply, can charge batteries
plus operate monitor
V-DV-PWR1
Battery Adapter
2-channel sequential charger with a built-in 60W power sup-
ply. Charges 2 ENDURA E series batteries in fewer than 5
hours. One 10’ XLR cable included. Weighs only 2 lbs
IDX-VL-2Plus
Sequential 2 channel charger
Economically charges 4 ENDURA E series batteries in
under 6 hours using Full Power Charge (FPC) method
IDX-VL-4
Sequential 4 channel charger
IDX-VL-4S
Charges 4 ENDURA E series batteries in 2.5 hours or less
V-Mount battery pack with 3 LED power Indicator
Simultaneous 4 channel charger
55 W Lithium Battery
IDX-E7S
IDX-E7
55 W Lithium Battery
with Power Link
V-Mount Battery Pack with PowerLink includes accurate
Power Status Display and supports Digi-View
82 W Lithium Battery
IDX-E10S
V-Mount battery pack with 3 LED power Indicator
82 W Lithium Battery
with Power Link
V-Mount Battery Pack with PowerLink includes accurate
Power Status Display and supports Digi-View
IDX-E10
Analog to Digital Converter
BC-0909-AD
Converts composite, Y/C, or YPbPr signals to HDSDI
Fits all single screen 7.0", 8.4", 10.4" and V-R65P-HD
monitors. Mounting plate can be installed to any side of
monitor enclosure. Compatible with most 1/4-20 threaded
mounting devices.
Set of 3 Tripod Mount Brackets
with screws
V-LCD70TMB-02
Package of 10 non-toxic, antistatic, alcohol and ammonia
free cleaning wipes.
Cleaning Wipes
V-HWP-K
Marshall Electronics
3
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Electrical Specifications
Display (Viewing Area)
Screen Aspect
Resolution (RGB Dots)
Viewing Angles
Contrast Ratio
Dot Pitch
10.4 Inch diagonal (211.2mm W x 158.4mm H)
Native 4:3, Switchable to 16:9
1024HxRGx768V (2.4 Million Pixels)
170°H x 170°V
400:1
0.206mm square pixel
Pixel Response
Brightness
13ms rise /12ms fall
400 cd/m²
Backlight
Field Replaceable CCFL (50,000 hour half life)
Anti Reflection, Anti Glare, Hard Coat
Screen Treatments
Protective Screen
0.118” (3mm) thick Optical Grade Polycarbonate with Anti-Glare and Anti-Abrasion
coatings. (600 Cheesecloth mil-M-13508C)
Estimated MTBF
Inputs
5 years of 24/7 operation
1 SDI/HDSDI input per screen; SMPTE 259M-C, 292M / ITU-R BT.601; female BNC;
1080i/60,59.95,50; 1080psF/24,23.98; 1035i/60,59.94; 720p/60,59.94,50,30,29.97,25
Active Outputs
1 SDI/HDSDI output per screen; SMPTE 259M-C, 292M / ITU-R BT.601; female BNC
2 LEDs (Green, Red) per monitor; female HD-15 connector
D65 (6500° Kelvin)
Tally
Color temperature
Color Gamut
SMPTE-C/EBU
Luma Linearity
Typical +/- 3% with 5 ire increments (0 to 10 ire)
10.4 to 16.8 VDC
Power Required
Power Consumption
Operating Temperature
Storage Temperature
Compliance
18 watt nominal for V-R1041DP-TE, 36 watt nominal for V-R1042DP-TE
32°F to 120°F (0°C to 50°C)
-4°F to 120°F (-20°C to 50°C)
₠, FCC-Class A, ANSI-63.4 (Certificates on file)
Do not dispose. Return to Manufacturer or Authorized Recycle Facility
14-10 VDC (Universal Voltage 5.0Amps max - UL Class 2 supply included)
RoHS WEEE/Environmental
V-PS12-5V-1 Power Supply
6 Mechanical Specification
V-R1041DP-TE
10.25” x 8.56” x 1.60”
3.95 lbs
V-R1042DP-TE
18.69” x 8.56” x 1.60”
6.95 lbs
V-PS12-5V-1 Power Supply
4.13” x 2.50” x 1.25”
0.65 lbs
Dimensions (W x H x D)
(Main body only)
Approx. Weight
7 Faceplate Cleaning
Faceplate Cleaning
When cleaning the faceplate it is very important to use non-abrasive and ammonia free cleaning agents and a clean micro fiber
cloth. Do not use paper towels. Paper towel fibers are coarse and may scratch the surface of the Polycarbonate faceplate.
Paper towels may also leave streaks on the surface. Antistatic and fingerprint resistant cleaning agents are recommended.
Wash protective cover with a solution of mild soap or detergent and lukewarm water. Use a clean soft cloth, applying only light pres-
sure. Rinse with clean water and dry by blotting with a damp cloth or chamois. Grease, oil or tar may be removed with a good grade
of hexane, aliphatic naphtha, or kerosene. These solvents may be obtained at a paint or hardware store and should be used in ac-
cordance with manufacturer’s recommendations.
DO NOT USE: window cleaning sprays, kitchen scouring compounds or solvents such as acetone, gasoline, benzene,
alcohol, carbon tetrachloride, or lacquer thinner. These can scratch the sheet’s surface and/or weaken the sheet causing
small surface cracks called “crazing.”
Faceplate Dusting
Dust with a soft, damp cloth or chamois. Dry or gritty cloths may cause surface scratches and create a static electric charge on the
surface. Neutralizing static electricity effects by using recommended cleaning and polishing practice.
Faceplate Polishing
Protect and maintain surface gloss by occasional polishing with a good plastic cleaner and polish. Apply a thin, even coat with a soft
clean cloth and polish lightly with cotton flannel. Then wipe with a damp cloth to help eliminate electrostatic charges that can attract
dust particles.
Marking on the Faceplate
Use SHARPEE or equivalent marker. Clean as per instructions with an ammonia free cleaning agent.
V-R1041DP-TE / V-R1042DP-TE User’s Guide
4
Download from Www.Somanuals.com. All Manuals Search And Download.
|