Magnavox CRT Television 14MS2331 17 20MS2331 17 20MS2331 37R User Manual

USER MANUAL  
Color Television  
14MS2331/17 20MS2331/17 20MS2331/37R  
Thank you for choosing Magnavox.  
Need help fast?  
Read your User Manual first for quick tips that make  
using your Magnavox product more enjoyable. If you  
have read your instructions and still need assistance  
you may access our online help at  
or  
call 1-800-705-2000  
while with your product.  
IB8483E002  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
Read before operating equipment  
1. Read these instructions.  
ommended international global safety standards for tilt  
2. Keep these instructions.  
and stability properties of its cabinet design.  
• Do not compromise these design standards by apply-  
ing excessive pull force to the front, or top, of the cabi-  
net which could ultimately overturn the product.  
• Also, do not endanger yourself, or children, by plac-  
ing electronic equipment/toys on the top of the cabinet.  
Such items could unsuspectingly fall from the top of  
the set and cause product damage and/or personal  
injury.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with a dry cloth.  
7. Do not block any of the ventilation openings. Install in  
accordance with the manufacturers instructions.  
8. Do not install near any heat sources such as radiators,  
heat registers, stoves, or other apparatus (including  
amplifiers) that produce heat.  
18. Wall or Ceiling Mounting - The appliance should be  
mounted to a wall or ceiling only as recommended by  
the manufacturer.  
19. Power Lines - An outdoor antenna should be located  
away from power lines.  
20. Outdoor Antenna Grounding - If an outside antenna  
is connected to the receiver, be sure the antenna sys-  
tem is grounded so as to provide some protection  
against voltage surges and built up static charges.  
Section 810 of the National Electric Code,  
ANSI/NFPA No. 70-1984, provides information with  
respect to proper grounding of the mast and supporting  
structure, grounding of the lead-in wire to an antenna  
discharge unit, size of grounding connectors, location  
of antenna-discharge unit, connection to grounding  
electrodes, and requirements for the grounding elec-  
trode. See Figure below.  
9. Do not defeat the safety purpose of the polarized or  
grounding-type plug. A polarized plug has two blades  
with one wider than the other. A grounding type plug  
has two blades and third grounding prong. The wide  
blade or third prong are provided for your safety. Of  
the provided plug does not fit into your outlet, consult  
an electrician for replacement of the obsolete outlet.  
10. Protect the power cord from being walked on or  
pinched particularly at plugs, convenience receptacles,  
and the point where they exit from the apparatus.  
11. Only use attachments/accessories specified by the  
manufacturer.  
12.  
Use only with a cart, stand, tripod, bracket  
or table specified by the manufacturer,  
owith the apparatus. When a cart is used, use  
caution when moving the cart/apparatus combination  
to avoid injury from tip-over.  
21. Object and Liquid Entry - Care should be taken so  
that objects do not fall and liquids are not spilled into  
the enclosure through openings.  
13. Unplug this apparatus during lightning storms or when  
unused for long periods of time.  
14. Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has been  
damaged in any way, such as power-supply cord or  
plug is damaged, liquid has been spilled or objects  
have fallen into apparatus, the apparatus has been  
exposed to rain or moisture, does not operate normally,  
or has been dropped.  
a) Warning: To reduce the risk of fire or electric shock,  
this apparatus should not be exposed to rain or mois-  
ture and objects filled with liquids, such as vases,  
should not be placed on this apparatus.  
22. Battery Usage CAUTION - To prevent battery leak-  
age that may result in bodily injury, property damage,  
or damage to the unit:  
15. This product may contain lead and mercury. Disposal  
of these materials may be regulated due to environ-  
mental considerations. For disposal or recycling infor-  
mation, please contact your local authorities or the  
16. Damage Requiring Service - The appliance should be  
serviced by qualified service personnel when:  
A. The power supply cord or the plug has been damaged;  
or  
• Install all batteries correctly, with + and - aligned as  
marked on the unit.  
• Do not mix batteries (old and new or carbon and  
alkaline, etc.).  
• Remove batteries when the unit is not used for a long  
time.  
B. Objects have fallen, or liquid has been spilled into the  
appliance; or  
Example of Antenna Grounding as per  
NEC - National Electric Code  
C. The appliance has been exposed to rain; or  
D. The appliance does not appear to operate normally or  
exhibits a marked change in performance; or  
E. The appliance has been dropped, or the enclosure dam-  
aged.  
GROUND CLAMP  
ANTENNA LEAD  
IN WIRE  
17. Tilt/Stability - All televisions must comply with rec-  
ANTENNA  
DISCHARGE  
UNIT  
Note to the CATV system installer: This  
reminder is provided to call the CATV system  
installer's attention to Article 820-40 of the NEC that  
provides guidelines for proper grounding and, in partic-  
ular, specifies that the cable ground shall be connected  
to the grounding system of the building, as close to the  
point of cable entry as practical.  
(NEC SECTION 810-20)  
GROUNDING  
CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMPS  
POWER SERVICE GROUNDING  
ELECTRIC SERVICE EQUIPMENT  
ELECTRODE SYSTEM (NEC ART 250, PART H)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PANEL LAYOUT  
Panel  
Sequence  
and  
MODEL  
REGISTRATION  
INFORMATION  
PA1NEL PA2NEL  
SAFETY  
INFO  
COVER  
Panel Index  
Side 1  
PA3NEL PA4NEL PA5NEL PA6NEL PA7NEL PA8NEL  
PANEL PANEL PANEL PANEL PANEL  
PA9NEL 10 11 12 13 14  
PANEL PANEL  
PANEL PANEL PANEL PANEL  
Side 2  
19 20  
15 16 17 18  
PANEL PANEL PANEL PANEL PANEL PANEL  
21 22 23 24 25 26  
PANEL PANEL PANEL PANEL PANEL PANEL  
27 28 29 30 31 32  
PANEL INDEX  
Subject  
Panel No. Subject  
Panel No.  
Alternate Channel . . . . . . . . . . . . . . . . . .26 Picture Menu Controls . . . . . . . . . . . . . .11  
Antenna Basic Connection . . . . . . . . . . . .1 Remote Batteries . . . . . . . . . . . . . . . . . . . .4  
Front Audio/Video Input Jacks . . . . . . . . .3 Remote Control Button Descriptions .5-6  
Automatically Program TV . . . . . . . . . . . .9 Sleeptimer . . . . . . . . . . . . . . . . . . . . . . . .22  
Basic Cable Connection . . . . . . . . . . . . . .1 SmartLock™ Controls  
Basic Remote Operation . . . . . . . . . . . . . .4  
Basic Television Operation . . . . . . . . . . . .4  
Cable Box Connection . . . . . . . . . . . . .1-2  
Cable TV Control (Tuner Mode) . . . . . . .8  
Care and Cleaning . . . . . . . . . . . . . . . . . .28  
Channel Edit . . . . . . . . . . . . . . . . . . . . . .10  
Closed Caption Control . . . . . . . . . . . . .21  
Access Code . . . . . . . . . . . . . . . . . . . . .15  
Block Channels . . . . . . . . . . . . . . . . . . .16  
Blocking/Clearing All Channels . . . . . . .17  
Movie Ratings . . . . . . . . . . . . . . . . . . . .18  
Other Blocking Options . . . . . . . . . . . .20  
TV Ratings . . . . . . . . . . . . . . . . . . . . . . .19  
Understanding SmartLock™ . . . . . . . .14  
Format Control . . . . . . . . . . . . . . . . . . . .13 SmartPicture™ Control . . . . . . . . . . . . .23  
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . .29 SmartSound™ Control . . . . . . . . . . . . . .24  
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 SmartSurf . . . . . . . . . . . . . . . . . . . . . . . .25  
Language Control . . . . . . . . . . . . . . . . . . .7 Troubleshooting . . . . . . . . . . . . . . . . . . .27  
Limited Warranty . . . . . . . . . . . . . . . . . .32  
TM  
TM  
TM  
SmartPicture , SmartSound , and SmartLock are regis-  
tered trademarks of Philips Consumer Electronics North  
America. Copyright © 2003 Magnavox. All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Antenna Connection  
1
combination antenna receives normal  
Abroadcast channels (VHF 2-13 and  
UHF 14-69). Your connection is easy  
since there is only one 75(ohm)  
antenna plug on the back of your TV -  
and that’s where the antenna goes.  
If your antenna has a round  
cable (75 ohm) on the end, then  
1
Combination  
VHF/UHF Antenna  
(Outdoor or Indoor)  
75  
you're ready to connect it to the  
TV. Go to step 2.  
Rear of TV  
If your antenna has flat twin-  
lead wire (300 ohm), you first  
need to attach the antenna wires  
to the screws on a 300 to 75  
ohm adapter (not supplied with  
TV).  
Twin Lead  
Wire  
Push the round end of the  
adapter or antenna cable onto  
2
75  
the 75jack on the rear of the  
TV. If the round end of the  
antenna cable is threaded, screw  
it down tight.  
Round Cable 75  
Basic CableTV Connection  
f Cable TV signal into your home is a  
Isingle cable (75 ohm) the connection  
to the TV is easy.  
Connect the Cable TV cable  
directly to the 75jack on the  
1
TV.  
75  
Rear of TV  
Cable TV Signal  
Helpful Hints  
If no Video Signal is present, the TV  
will shut itself off in about 10 min-  
utes. If the TV is tuned to the AV  
channel and there is no Video Signal  
present, the screen will remain black  
and the TV will shut itself off in about  
10 minutes.  
Use Auto Program as described on  
panel 9 to set up channels that are  
available in your area. Use the CH +/–  
buttons to scan available channels.  
RF Coaxial  
Cable 75Ω  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cable Box Connections  
2
f you cable signal uses a cable box or  
Idecoder, follow the easy steps below to  
complete the connection.  
Cable Signal IN  
from the Cable  
Company  
Cable Box (w/RF In/Outputs):  
This connection will be mono.  
Connect the Cable Company  
2 1  
VIDEO  
IN OUT  
AUDIO IN  
SPDIF  
R
L
S-VIDEO  
CABLE  
IN  
IR  
DVD-D OUT  
supplied cable to the signal  
IN(put) plug on the back of the  
TO  
TV/VCR  
1
Y
Pb  
Pr  
AUDIO OUT  
OPTICAL  
SPDIF  
USB  
TV  
PASSCARD  
Cable Box.  
Jack Panel Back of Cable Box  
Using a separate round coaxial  
cable, connect one end to the  
2
3
OUT(put) (TO TV) plug on  
the back of the Cable Box.  
3
Connect the other end of the  
round coaxial cable to the 75Ω  
75  
75  
input on the back of the television.  
Round 75  
Coaxial Cable  
Screw it down finger tight.  
Jack Panel Back of TV  
NOTE: If applicable, set the OUTPUT  
CHANNEL SWITCH on the back of the  
cable box to CH 3 or 4. Tune the TV to  
the same channel and change channels  
at the cable box. In some cases, the  
cable box will automatically tune to  
either channel 3 or 4, change channels  
until the picture appears.  
Helpful Hints  
If no Video Signal is present, the TV  
will shut itself off in about 10 minutes.  
If the TV is tuned to the AV channel  
and there is no Video Signal present,  
the screen will remain black and the  
TV will shut itself off in about 10 min-  
utes.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front AV (Audio/Video) Input Connections  
3
Stereo Devices:  
udio and Video Front Inputs are avail-  
Aable for a quick connection of a VCR,  
to playback video from a camera, or  
attach a gaming device. Use the AV but-  
ton on the remote control to tune these  
inputs.  
MENU  
Connect the video (yellow)  
cable from the Video output on  
VOLUME +  
CHANNEL  
POWER  
Front Jack panel of TV  
1
the Camera (or accessory device)  
to the Video (yellow) Input locat-  
ed on the FRONT of the TV.  
3
1
2
For Mono Devices: Connect  
one end of the audio cable from  
2
Red and White  
Audio cables  
Yellow  
Video  
cable  
the Audio Out jack on the device  
to the Audio In (white) jack on  
the FRONT of the television.  
ANTENNA  
IN  
OUT  
OUT  
VIDEO  
R
AUDIO  
L
ANTENNA  
OUT  
VCR,  
3
5
Camcorder,  
DVD  
IN  
IN  
For Stereo Devices: Connect  
one end of the audio cables from  
the Audio Out jacks on the  
device to the Audio In (red and  
white) jacks on the FRONT of  
the television.  
Player, etc.  
with  
Audio and  
Video Out jacks  
Turn the TV and the accessory  
device ON.  
3
Press the CH+ or CH- but-  
ton on the remote control to  
tune the TV to the front input  
jacks. “AV” will appear on the TV  
screen.  
4
Press the PLAY button on  
the accessory device to view  
5
playback, or to access the acces-  
sory device (camera, gaming unit,  
etc.).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BasicTV and Remote Control Illustrations  
Television  
4
Press POWER to turn on the  
Connect  
headphones  
(not sup-  
plied) to the  
; jack.  
TV.  
1
2
Press VOLUME + to increase  
the sound level. Press VOLUME  
to lower the sound level.  
MENU  
VIDEO  
AUDIO  
VOLUME  
+
CHANNEL  
POWER  
Press both buttons at the  
same time to display the TV’s  
on-screen menu. Once in the  
menu, use these buttons to make  
menu adjustments or selections.  
Press CHANNEL ;8 or 9 to  
select TV channels.  
Stereo models  
(red and white  
AUDIO IN jacks)  
3
4
Remote  
Sensors  
(point  
remote  
here)  
Connect an acces-  
sory device to the  
AUDIO/VIDEO IN  
jacks.  
Remote Control  
Point the remote control toward  
the remote sensor on the front of  
the TV when operating the TV.  
Remote sensor on  
remote control  
Battery Installation  
To load the supplied batteries into  
the remote:  
R
E
W
O
P
3
5
+
H
C
2
6
8
1
H
C
9
0
4
+
L
O
V
C
C
7
L
O
V
H
/C  
A
S
U
T
A
T
E
T
S
MEN
U
M
IT  
X
E
Remove the battery compart-  
P
E
T
R
A
E
L
S
M
S
F
R
U
S
ment lid on the back of the  
PICTURE  
SOUND  
1
2
remote.  
Place the batteries (two AA)  
in the remote. Be sure the (+)  
and (-) ends of the batteries line up  
correctly (as marked inside the  
remote).  
Battery Installation  
Reattach the battery lid.  
3
Helpful Hints  
The current channel number will  
appear briefly when you first turn on  
the TV or when you change channels.  
Press STATUS/EXIT to see the cur-  
rent channel number.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of Remote Control Buttons  
5
NUMBER Buttons  
POWER  
CH  
1
4
2
5
8
0
3
6
Press the Number buttons to select TV  
channels or to enter values in the menu.  
For single-digit channels, press the  
Number button for the channel you  
want. The TV will pause briefly before  
going to the chosen channel.  
CH  
7
9
A/CH Button  
A/CH  
CC  
VOL  
VOL  
(Alternate Channel)  
Press to switch between the last channel  
and the present channel.  
Details are on panel 26.  
STATUS  
EXIT  
STATUS/EXIT Button  
Press to see the current channel number.  
Press to remove a menu.  
MENU  
CC Button  
SLEEP  
MUTE  
Press to activate Closed Captioning.  
Details are on panel 21.  
SURF  
SMART  
SLEEP Button  
Press to set the TV to turn itself off with-  
in a certain time. Details are on panel 22.  
PICTURE SOUND  
SmartSurf  
If your TV model has SmartSurf, press this  
button to move through the channels you  
have set. Details are on panel 25.  
MAGNAVOX  
Continued on Next Panel  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(Cont’d)  
Description of Remote Control Buttons  
6
POWER button  
Press to turn the TV on or off.  
POWER  
1
4
2
5
8
0
3
6
CH  
CH(annel) +/– Buttons  
Press to scan memorized channels.  
CH  
7
9
VOL(ume) +/– Buttons  
Press to increase or decrease the  
sound.  
A/CH  
CC  
VOL  
VOL  
STATUS  
EXIT  
MENU Button  
Press to see the menu. Press  
repeatedly to return to previous  
menus or remove the menus.  
MENU  
Arrow 2 3 5 Buttons  
Press to select or adjust items in  
the menu.  
SLEEP  
MUTE  
MUTE Button  
SURF  
SMART  
Press to eliminate or restore the TV  
sound. MUTE will appear on the TV  
when the sound is muted.  
PICTURE SOUND  
SMART SOUND Button  
Press to choose a sound setting.  
Details are on panel 24.  
SMART PICTURE Button  
Press to choose a picture setting.  
Details are on panel 23.  
MAGNAVOX  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to Use the Language Control  
7
or our Spanish speaking TV owners  
Fan on-screen LANGUAGE option is  
present. With the LANGUAGE control  
you can set the TV’s on-screen menu to  
be shown in either English or Spanish.  
Main  
Picture  
Sound  
Features  
Install  
Brightness  
Color  
Picture  
Sharpness  
Tint  
Main  
Picture  
Sound  
Features  
Install  
Language  
Tuner Mode  
Auto Program  
Channel Edit  
Press the MENU button on  
the remote to show the on-  
More...  
1
screen menu.  
Press the CURSOR UP ▲  
POWER  
CH  
1
4
2
5
8
0
3
6
9
or DOWN buttons to  
2
scroll through the on-screen  
menu until the word  
INSTALL is highlighted.  
Press the CURSOR RIGHT  
button to display the  
INSTALL menu features.  
Install  
Language  
Tuner Mode  
Auto Program  
Channel Edit  
English  
CH  
7
A/CH  
CC  
VOL  
VOL  
6
STATUS  
EXIT  
1
3
4
MENU  
SLEEP  
OR  
MUTE  
Press CURSOR UP or  
DOWN buttons to scroll  
3
5
SURF  
SMART  
Instalar  
Idioma  
Sintonia  
Auto Programa  
Editar Canal  
the Install features until the  
word LANGUAGE is high-  
lighted.  
Press the CURSOR RIGHT  
button repeatedly to  
PICTURE SOUND  
2
4
5
MAGNAVOX  
select ENGLISH or  
ESPAÑOL (Spanish).  
When finished, press the  
STATUS /EXIT button to  
remove the menu from the  
TV’s screen.  
6
HELPFUL HINT  
The Language control only makes  
the TV’s on-screen MENU items  
appear in English or Spanish text.  
It does not change the other on-  
screen text features such as Closed  
Caption (CC) TV shows.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO USE THE TUNER MODE CONTROL  
8
he TUNER MODE control allows you  
Tto change the TV’s signal input to  
either ANTENNA, CABLE, or AUTO  
mode. It’s important for the TV to know  
what type of signal that is connected.  
(From a Cable TV signal or a normal  
Antenna signal.) In the AUTO mode,  
when the AUTO PROGRAM feature is  
activated, the TV will automatically  
choose the correct mode.  
Main  
Picture  
Sound  
Features  
Install  
Brightness  
Color  
Picture  
Sharpness  
Tint  
Main  
Picture  
Sound  
Features  
Install  
Language  
Tuner Mode  
Auto Program  
Channel Edit  
More...  
POWER  
1
4
2
5
8
0
3
CH  
Press the MENU button on  
6
Install  
Language  
Tuner Mode  
Auto Program  
Channel Edit  
English  
Antenna  
the remote to show the on-  
screen menu.  
Press the CURSOR UP or  
DOWN buttons to scroll  
through the on-screen menu until  
the word INSTALL is highlight-  
ed.  
CH  
7
9
1
2
A/CH  
CC  
VOL  
VOL  
6
STATUS  
EXIT  
1
MENU  
SLEEP  
OR  
MUTE  
3
5
SURF  
SMART  
Install  
Language  
Tuner Mode  
Auto Program  
Channel Edit  
Press the CURSOR RIGHT  
PICTURE SOUND  
English  
Cable  
2
4
button to display the  
3
4
INSTALL menu features.  
Press CURSOR UP or  
DOWN buttons to scroll  
the Install features until the  
words TUNER MODE is high-  
lighted.  
MAGNAVOX  
OR  
Install  
Language  
English  
Auto  
Press the CURSOR RIGHT  
Tuner Mode  
Auto Program  
Channel Edit  
button to select either  
5
ANTENNA, CABLE, or  
AUTO mode.  
When finished, press the  
STATUS /EXIT button to  
6
remove the on-screen menu  
from the TV’s screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO AUTOMATICALLY PROGRAM TV  
9
our TV can automatically set itself  
Yfor local area (or Cable TV) chan-  
nels. This makes it easy for you to  
select only the TV stations in your  
area when the CHANNEL (+) or (–)  
buttons are pressed.  
Main  
Picture  
Sound  
Features  
Install  
Brightness  
Color  
Picture  
Sharpness  
Tint  
Main  
Picture  
Sound  
Features  
Install  
Language  
Tuner Mode  
Auto Program  
Channel Edit  
More...  
Note: Make sure the antenna or  
cable signal connection has been  
completed before AUTO PROGRAM  
is activated.  
POWER  
1
4
2
5
8
0
3
Press the MENU button  
CH  
6
Install  
Language  
Tuner Mode  
Auto Program  
Channel Edit  
on the remote to show the  
on-screen menu.  
Press the CURSOR UP ▲  
or DOWN buttons to  
scroll through the on-screen  
menu until the word  
INSTALL is highlighted.  
2
4
1
2
CH  
7
9
A/CH  
CC  
VOL  
VOL  
6
STATUS  
EXIT  
1
MENU  
SLEEP  
MUTE  
Auto Program  
Channel  
3
5
SURF  
Press the CURSOR  
SMART  
12  
13  
RIGHT button to dis-  
PICTURE SOUND  
2
4
3
play the INSTALL menu  
features.  
Press CURSOR UP or  
DOWN buttons to  
scroll the Install features until  
the words AUTO PRO-  
GRAM are highlighted.  
Auto Program  
Channel  
4
MAGNAVOX  
Auto Program  
Channel  
14  
Press the CURSOR  
RIGHT button to start  
the Auto Program scanning  
of channels. Auto  
Programming will store all  
available channels in the TV’s  
memory then tune to the  
lowest available channel  
when done.  
5
HELPFUL  
HINT  
When CABLE is selected, channels  
1-125 are available.  
When ANTENNA is selected,  
When finished, press the  
channels 2-69 are available.  
STATUS/EXIT button to  
6
When AUTO is selected, the TV  
will automatically set itself to the  
correct mode based on the type of  
signal it detects when the AUTO  
PROGRAM feature is activated.  
remove the menu from the  
TV’s screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO ADD OR DELETE CHANNELS  
10  
hannel Edit makes it easy for you to ADD  
Cor DELETE channels from the list of chan-  
Main  
Picture  
Sound  
Features  
Install  
nels stored in the TV’s memory.  
Brightness  
Color  
Picture  
Sharpness  
Tint  
Press the MENU button on the  
Main  
Picture  
Sound  
Features  
Install  
Language  
remote to show the on-screen menu.  
Tuner Mode  
Auto Program  
Channel Edit  
1
More...  
Press the CURSOR UP or  
DOWN buttons to scroll  
2through the on-screen menu until the  
6
8
word INSTALL is highlighted.  
POWER  
1
4
2
5
8
0
3
6
9
2
4
2
4
7
Press the CURSOR RIGHT 3  
CH  
6
Install  
Language  
Tuner Mode  
Auto Program  
Channel Edit  
button to display the INSTALL menu  
Channel No.  
Skipped  
CH  
7
9
3features.  
A/CH  
CC  
VOL  
VOL  
Press the CURSOR UP or  
STATUS  
EXI
DOWN buttons to scroll the  
1
MENU  
4Install features until the words  
CHANNEL EDIT are highlighted.  
SLEEP  
MUTE  
Press the CURSOR RIGHT 3  
Channel Edit  
Channel No.  
Skipped  
3
5
8
SURF  
SMART  
12  
button to display the CHANNEL  
PICTURE SOUND  
5EDIT options.  
With the CHANNEL EDIT  
options displayed, and CHANNEL  
6NO. highlighted; you can use the cur-  
MAGNAVOX  
sor buttons to scroll through all avail-  
able channels that you wish to add  
(Skipped OFF), or delete (Skipped  
ON) from the TV’s memory. You can  
also use the NUMBERED buttons  
to go directly to a specific num-  
bered channel that you wish to  
add or skip. Or, you can also use the  
CH + or CH - to quickly scan the  
channels that have not been skipped.  
Channel Edit  
Channel No.  
Skipped  
On  
Off  
Channel Edit  
Channel No.  
Skipped  
Using the CURSOR DOWN ▼  
button, scroll the menu to highlight  
7the word SKIPPED.  
Now use the CURSOR RIGHT 3  
button to toggle between ON or  
8OFIfFO. N is selected the channel is  
HELPFUL HINT  
skipped when scrolling channels  
with the CH + or – buttons. If  
OFF is selected the channel is not  
skipped when scrolling channels  
with the CH + or – buttons.  
An “X” appearing in front of any channel  
will indicate that channel has skip on. When  
the CH + or CH - buttons are used, those  
channels will be skipped.  
In order to get to the external input chan-  
nel AV, you must use the CURSOR Right 3  
or CURSOR LEFT 2buttons.  
When finished, press the STA-  
TUS /EXIT button to remove the  
9menu from the TV’s screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11 HOW TO USE THE PICTURE ADJUSTMENT CONTROLS  
o adjust your TV picture controls, select a  
Tchannel and use the Picture Menu Controls  
listed below:  
Picture  
Brightness  
Color  
Picture  
Sharpness  
Tint  
Brightness: Press the CURSOR  
50  
RIGHT 3or LEFT 2 buttons  
until the darkest parts of the picture  
are as bright as you prefer.  
1
Color: Press the CURSOR  
RIGHT 3 or LEFT 2 buttons  
to add or eliminate color.  
2
3
Color Temp.  
Picture: Press the CURSOR  
RIGHT 3or LEFT 2 buttons  
until lightest parts of the picture  
show good detail.  
Brightness  
65  
50  
50  
50  
Sharpness: Press the CURSOR  
RIGHT 3or LEFT 2 buttons to  
improve detail in the picture.  
4
5
6
Color  
Tint: Press the CURSOR RIGHT  
3or LEFT 2 buttons to obtain  
natural skin tones.  
Picture  
Color Temp: Press the CURSOR  
RIGHT 3or LEFT 2 buttons  
to select NORMAL, COOL, or  
WARM picture preferences. (NOR-  
MAL will keep the whites, white;  
COOL will make the whites, bluish;  
and WARM will make the whites,  
reddish.)  
Sharpness  
Tint  
0
Color Temp.  
Normal  
Contrast +: Press the CURSOR  
RIGHT 3or LEFT 2 buttons to  
toggle the control On or OFF. The  
Contrast + control helps to “sharp-  
en” the picture quality. The black  
portions of the picture become rich-  
er in darkness and the whites  
Warm  
7
or  
Cool  
On  
Off  
Contrast +  
become brighter.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO USE THE SOUND CONTROLS  
o adjust your TV sound, select and use the  
12  
TSound Menu Controls listed below.  
Treble Boost: Press the or ᮤ  
Sound  
Treble Boost  
Bass Boost  
Balance  
AVL  
buttons to turn the control On or  
1
On  
Off. When On, the control will  
enhance the high frequency sounds.  
Bass Boost: Press the or ᮤ  
buttons to turn the control On or  
2
Sound  
Off. When On, the control will  
enhance the low frequency sounds.  
Balance: Press the or but-  
tons to adjust the level of sound com-  
3
4
ing from the left and right speakers.  
AVL: (Auto Volume Leveler) Press  
the or buttons to turn the  
control On or Off. When On, AVL  
will level out the sound being heard  
when sudden changes in volume  
occur during commercial breaks or  
channel changes.  
Treble Boost  
On  
or Off  
On  
Bass Boost  
Balance  
AVL  
or Off  
R
L
Sound: Press the or buttons  
to select between Stereo or Mono  
5
settings. Note: If Stereo is not pres-  
ent on a selected show and the TV is  
placed in the Stereo mode, the  
sound coming from the TV will  
remain in the Mono mode.  
On  
or Off  
Sound  
Mono  
or Stereo  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO USE THE FORMAT CONTROL (EXPAND 4:3)  
13  
any times while watching movies from  
Ma DVD player the image is shown in  
“letter box” format. This is the format that is  
shown in movie theaters. When shown on a  
TV screen, the image will have areas of  
black on top and bottom of the screen.  
Main  
Picture  
Sound  
Features  
Install  
Brightness  
Color  
Picture  
Sharpness  
Tint  
Main  
Picture  
Sound  
Features  
Install  
SmartLock  
Format  
More...  
Press the MENU button on the  
remote to display the on-screen  
1
menu.  
Press the CURSOR DOWN ▼  
POWER  
1
4
2
5
8
0
3
Features  
SmartLock  
Format  
button until the word FEA-  
2
CH  
6
4:3  
TURES is highlighted.  
CH  
9
7
Press the CURSOR RIGHT ᮣ  
A/CH  
CC  
VOL  
VOL  
button to display the FEATURES  
3
6
5
STATUS  
EXIT  
menu options (SmartLock or  
1
Format).  
MENU  
OR  
Press the CURSOR DOWN ▼  
SLEEP  
MUTE  
button until the word FORMAT  
4
5
Features  
SmartLock  
Format  
3
5
is highlighted.  
SURF  
SMART  
Expand 4:3  
PICTURE SOUND  
2
4
Press the CURSOR RIGHT ᮣ  
or CURSOR LEFT buttons  
to select one of the two options 4:3  
or Expand 4:3.  
4:3 - Standard format for the TV.  
Expand 4:3 - Enlarges the picture  
to fill out the entire screen area,  
eliminating the “letter box” effect.  
MAGNAVOX  
When finished, press the STA-  
TUS/EXIT button to remove the  
6
menu from the TV’s screen.  
Note: The Expand 4:3 format can also  
be activated using the CURSOR UP ▲  
or DOWN buttons when the  
onscreen menu is not being displayed.  
Pressing these buttons will toggle the  
standard 4:3 format and the Expand 4:3  
format.  
4:3  
Expand 4:3  
Some models refer to SmartLock as  
AutoLock in the on-screen menu.  
These features are the same.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UNDERSTANDING THE SMARTLOCK™ CONTROLS  
14  
he SmartLock™ feature is an integrated cir- MOVIE RATINGS Continued  
Tcuit that receives and processes data sent by  
R: Restricted - This is programming is specifi-  
broadcasters, or other program providers, that  
contain program content advisories. When pro-  
grammed by the viewer, a TV with SmartLock™  
can respond to the content advisories and block  
program content that may be found objection-  
able (such as offensive language, violence, sexual  
situations, etc.). This is a great feature to censor  
the type of viewing children may watch.  
cally designed for adults. Anyone under the  
age of 17 should only view this programming  
with an accompanying parent or adult guardian.  
NC-17: No one under the age of 17 will  
be admitted. - This type of programming  
should be viewed by adults only.  
X: Adults Only - This type of programming  
contains one or more of the following: very  
graphic violence, very graphic and explicit or  
indecent sexual acts, very coarse and intensely  
suggestive language.  
SmartLock™ offers various BLOCK-  
ING controls from which to choose:  
Access Code - An Access Code must be  
set to prevent children from unblocking  
questionable or censored programming set  
by their parents.  
TV RATINGS  
TV-Y -- Designed for a very young audience,  
including children ages 2-6.  
Channel Block - After an access code has  
been programmed, you can block individual  
channels including the A/V inputs.  
TV-Y7 -- It may be appropriate for children  
age 7 and above who have acquired the devel-  
opment skills needed to distinguish between  
make-believe and reality.  
TV-G -- Suitable for most audiences, this type  
of programming contains little or no violence,  
no strong language, and little or no sexual dia-  
logue or situations.  
TV-PG -- This program contains material  
that parents may find unsuitable for younger  
children. Could contain Moderate violence (V),  
some sexual situations (S), infrequent coarse  
language (L), or some suggestive dialogue (D).  
Clear All - Allows you clear all channels  
being blocked from your viewing set with  
the Channel Block Control.  
Block All - Allows you to block ALL chan-  
nels and A/V inputs at one time.  
Movie Ratings - Certain blocking options  
exist which will block programming based on  
ratings patterned by the Motion Pictures  
Association of America.  
TV Ratings - Just like the Movie Ratings,  
programs can be blocked from viewing using  
standard TV ratings set by TV broadcasters.  
TV-14 -- This program contains some materi-  
al that many parents would find unsuitable for  
children under 14 years of age. This type of  
programming contains one or more of the fol-  
lowing: intense violence (V), intense sexual sit-  
uations (S), strong coarse language (L), or  
intensely suggestive dialogue (D).  
MOVIE RATINGS  
G: General Audience - All ages admitted.  
Most parents would find this program suit-  
able for all ages.  
PG: Parental Guidance Suggested - This  
programming contains material that parents  
may find unsuitable for younger children.  
PG-13: Parents Strongly Cautioned - This  
programming contains material that parents  
may find unsuitable for children under the age  
of 13.  
TV-MA -- This program is specifically  
designed to be viewed by adults and therefore  
may be unsuitable for children under 17. This  
type of programming contains one or more of  
the following: graphic violence (V), explicit sex-  
ual situations (S), or crude indecent language  
(L).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTING UP A SMARTLOCK™ ACCESS CODE  
15  
ver the next few panels you’ll learn how  
Oto block channels and get a better  
understanding of the rating terms for certain  
programming.  
Main  
Picture  
Sound  
Features  
Install  
Features  
SmartLock  
Format  
Timer  
SmartLock  
Format  
Start Time  
Stop Time  
Channel  
Activate  
Display  
First, let’s start by learning how to set a per-  
sonal access code:  
Press the MENU button on the  
remote to show the on-screen  
menu.  
1
Features  
SmartLock  
Format  
Features  
SmartLock  
Format  
Access Code  
- - - -  
Access Code  
XXXX  
Press the CURSOR UP  
5
or  
DOWN  
buttons until the word  
2
3
4
5
6
FEATURES is highlighted.  
Press the CURSOR RIGHT 3  
button to display the FEATURES  
menu options.  
Features  
SmartLock  
Format  
Features  
SmartLock  
Format  
Access Code  
XXXX  
Incorrect  
New Code  
- - - -  
Press the CURSOR UP  
5
or  
DOWN  
buttons until the  
words SmartLock™ are highlighted.  
Press the CURSOR RIGHT 3  
button. The screen will read,  
“ACCESS CODE - - - - .”  
Using the NUMBERED buttons,  
enter 0, 7, 1, 1. “XXXX”  
appears on the Access Code screen  
as you press the numbered buttons.  
“INCORRECT CODE” will  
appear on the screen, and you will  
need to enter 0, 7, 1, 1 again.  
The screen will ask you to enter a  
“New Code.” Enter a “new” 4  
digit code using the NUM-  
BERED buttons. The screen will  
then ask you to CONFIRM the code  
you just entered. Enter your new  
code again. “XXXX” will appear  
when you enter your new code and  
then display the SmartLock™ menu  
options.  
Features  
SmartLock  
Format  
SmartLock  
Block Channel  
Setup Code  
Clear All  
Block All  
Movie Rating  
TV Rating  
Confirm Code  
XXXX  
OffStop Time  
Channel  
Activate  
Display  
PO
1
4
2
5
8
0
3
6
CH  
2
6
7
7
CH  
7
9
A/CH  
CC  
VO
4
STATUS  
EXIT  
VOL  
1
MENU  
SLEEP  
MUTE  
3
5
SURF  
SMART  
PICTURE SOUND  
Proceed to the next panel to learn more...  
2
4
Some models refer to SmartLock as  
AutoLock in the on-screen menu.  
These features are the same.  
MAGNAVOX  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO BLOCK CHANNELS  
16  
fter your personal access code has been  
Aset (see previous page), you are now  
ready to select the channels or the A/V  
Inputs you want to block out or censor.  
Once you’ve entered your access code and  
the SmartLock™ features are displayed on  
the screen:  
SmartLock  
Block Channel OffStop Time  
Setup Code  
Clear All  
Block All  
Channel  
Activate  
Display  
Movie Rating  
TV Rating  
Press the CURSOR UP 5or  
DOWN buttons until the  
1
words BLOCK CHANNELS are  
highlighted.  
Block Channel On  
Press the CURSOR RIGHT 3  
button to turn blocking ON or  
2
OFF for that channel. When ON is  
selected the channel will be  
blocked.  
Enter your  
Access Code to  
view a tuned  
channel that is  
blocked with  
Block Channel.  
Channel 12  
Blocked By SmartLock  
Channel Blocking  
Access Code  
- - - -  
Press the CH + or CH – button  
to select other channels you wish  
to block. Repeat step 2 to block  
the new channel.  
3
POWER  
1
4
2
5
8
0
3
6
When finished, press the STA-  
CH  
TUS/EXIT button to remove the  
menu from the screen.  
4
CH  
9
H  
CC  
VOL  
VOL  
1
NOTE: If you ever forget your code,  
the 0, 7, 1, 1 code is the factory default  
and can be used to enter and create a  
new access code.  
STATUS  
3
2
EXIT  
MENU  
4
SLEEP  
MUTE  
SURF  
SMART  
1
PICTURE SOUND  
Some models refer to SmartLock as  
AutoLock in the on-screen menu.  
These features are the same.  
MAGNAVOX  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BLOCKING OR CLEARING ALL CHANNELS AT THE SAME TIME  
17  
fter blocking specific channels there  
Amay come a time when you want to  
block or clear all the channels at the same  
time.  
Once you’ve entered your access code and  
the SmartLock™ features are displayed on  
the screen:  
SmartLock  
Block Channel  
Setup Code  
Clear All  
Block All  
Movie Rating  
TV Rating  
Clear ?Stop Time  
Channel  
Activate  
Display  
Press the CURSOR UP 5or  
DOWN buttons to select  
1
Cleared  
Clear All  
either CLEAR ALL or BLOCK ALL.  
If CLEAR ALL is selected,  
SmartLock  
Block Channel  
Setup Code  
Clear All  
press the CURSOR RIGHT 3  
2
button to clear all blocked chan-  
nels. All channels will be viewable.  
Block All  
Movie Rating  
TV Rating  
Off  
If BLOCK ALL is selected,  
press the CURSOR RIGHT 3  
button to turn the control ON or  
OFF. When ON is selected, ALL  
available channels will be blocked  
from viewing.  
Block All  
On  
When finished, press the STA-  
TUS/EXIT button to remove the  
menu from the screen.  
POWER  
1
4
2
5
8
0
3
6
3
CH  
7
9
A/CH  
CC  
1
NOTE: If you ever forget your code,  
the 0, 7, 1, 1 code is the factory default  
and can be used to enter and create a  
new access code.  
VOL  
STATUS  
EXIT  
3
MENU  
SLEEP  
MUTE  
2
SURF  
SMART  
1
PICTURE SOUND  
Some models refer to SmartLock as  
AutoLock in the on-screen menu.  
These features are the same.  
MAGNAVOX  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BLOCKING PROGRAMS BASED ON MOVIE RATINGS  
18  
he SmartLock™ feature can block pro-  
Tgramming based on the Movie Industry rat-  
ings.  
SmartLock  
Block Channel  
Setup Code  
Clear All  
Once you’ve entered your access code and the  
SmartLock™ features are displayed on the  
screen:  
G
PG  
PG-13  
R
Block All  
Movie Rating  
TV Rating  
NC-17  
X
Press the CURSOR UP 5or  
DOWN buttons to highlight the  
1
words MOVIE RATING.  
Press the CURSOR RIGHT 3  
button to display the MOVIE RAT-  
2
Movie Rating  
ING options (G, PG, PG-13, R,  
NC17, or X).  
G
Off  
PG  
PG-13  
R
NC-17  
X
Press the CURSOR UP 5or  
DOWN buttons to highlight any  
3
of the Movie Rating options. When  
highlighted, all these options can be  
turned ON (which will allow blocking)  
or OFF (which will allow viewing).  
G
On  
Use the CURSOR RIGHT 3 but-  
ton on the remote to turn the rating  
4
option ON or OFF.  
POWER  
1
4
2
5
8
0
3
CH  
CH  
6
When a rating level is chosen to be  
blocked, any higher level rating will also be  
blocked from viewing. (i.e.: If “R” is select-  
ed to be blocked, NC-17 and X will auto-  
matically be blocked.)  
1
7
9
A/CH  
CC  
VO
3
VOL  
STATUS  
EXIT  
MENU  
SLEEP  
MUTE  
NOTE: If you ever forget your code, the  
0, 7, 1, 1 code is the factory default and  
can be used to enter and create a new  
access code.  
2
4
SURF  
SMART  
1
3
PICTURE SOUND  
Some models refer to SmartLock as  
AutoLock in the on-screen menu.  
These features are the same.  
MAGNAVOX  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BLOCKING PROGRAMS BASED ON TV RATINGS  
19  
he SmartLock™ feature can block pro-  
Tgramming based on the TV Industry rat-  
TV Rating  
TV-Y  
TV-Y7  
TV-G  
TV-PG  
TV-14  
TV-MA  
ings.  
Off  
Once you’ve entered your access code and the  
SmartLock™ features are displayed on the  
screen:  
Press the CURSOR UP 5or  
DOWN buttons to highlight the  
1
words TV RATING.  
Press the CURSOR RIGHT 3  
button to display the TV RATING  
2
options (TV-Y, TV-Y7, TV-G, TV-  
PG, TV-14, or TV-MA).  
On  
TV-Y  
Press the CURSOR UP 5or  
Block All, FV  
TV-Y7  
TV-G  
DOWN buttons to highlight any  
3
of the TV Rating options. When high-  
lighted, all these options can be turned  
ON (which will allow blocking) or OFF  
(which will allow viewing).  
Off  
Block All, V, S, L, D  
TV-PG  
TV-14  
NOTE: Some TV RATING options also  
have sub-ratings. The ratings of TV-Y7, TV-  
PG, TV-14, TV-MA can be customized to  
block V (violence), FV (fantasy violence), S  
(sexual situations), L (coarse language), or D  
(suggestive dialogue).  
Block All, V, S, L, D  
Block All, V, S, L  
TV-MA  
1
1
4
2
5
8
0
3
6
Press the CURSOR RIGHT 3  
button on the remote to turn the TV-  
4
3
Y or TV-G rating ON or OFF. Or,  
7
9
press the CURSOR RIGHT 3  
button to enter the sub-menus for the  
TV-Y7, TV-PG, TV-14 or TV-MA rat-  
ings.  
1
3
5
A/CH  
CC  
5
VOL  
STATUS  
EXIT  
MENU  
2
If the TV-Y7, TV-PG, TV-14 or TV-MA  
sub-menu is accessed, press the  
EEP  
MUTE  
5
CURSOR UP 5or DOWN ▼  
4
SURF  
SMART  
buttons to select one of the options  
(Block All, V, S, L, D, or FV).  
PICTURE SOUND  
6
Press the CURSOR RIGHT 3  
button on the remote to turn the  
6
option ON or OFF.  
Some models refer to SmartLock as  
AutoLock in the on-screen menu.  
These features are the same.  
MAGNAVOX  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER SMARTLOCK™ BLOCKING OPTIONS  
20  
martLock™ offers the viewer other  
Sblocking features as well. With these  
Blocking Options, the censoring can be  
turned ON or OFF.  
Once you’ve entered your access code and  
the SmartLock™ features are displayed on  
the screen:  
SmartLock  
Setup Code  
Clear All  
Block All  
Movie Rating  
TV Rating  
Block Options  
Press the CURSOR UP 5or  
DOWN buttons until the  
1
words BLOCKING OPTIONS  
are highlighted.  
Press the CURSOR RIGHT 3  
button to display the Blocking  
2
On  
On  
On  
Blocking  
Options (BLOCKING, UNRAT-  
ED, or NO RATING) menu.  
Unrated  
BLOCKING: Might be called the “mas-  
ter switch” for SmartLock™. When ON,  
ALL blocking/censoring will take place.  
When OFF, ALL blocking is disabled.  
No Rating  
UNRATED: ALL unrated programs  
based on the Movie Ratings or Parental  
(TV) Guidelines can be blocked if this fea-  
ture is set to ON and the BLOCKING  
feature is set to OFF.  
POWER  
1
2
5
8
0
3
6
CH  
CH  
4
1
7
9
NO RATING: ALL programming with  
NO content advisory data can be  
blocked if set to ON and the BLOCK-  
ING feature is set to OFF.  
A/CH  
CC  
VO
3
VOL  
STATUS  
EXIT  
4
MENU  
Press the CURSOR UP 5or  
SLEEP  
MUTE  
DOWN buttons to highlight  
3
2
4
the desired feature.  
SURF  
SMART  
1
3
PICTURE SOUND  
When highlighted, each feature can  
be turned ON or OFF using the  
4
CURSOR RIGHT 3or LEFT  
2 buttons on the remote.  
Some models refer to SmartLock as  
AutoLock in the on-screen menu.  
These features are the same.  
MAGNAVOX  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO USE THE CLOSED CAPTION CONTROLS  
21  
losed Captioning (CC) allows you to  
Cread the voice content of television pro-  
grams on the TV screen. Designed to help  
the hearing impaired, this feature uses on-  
screen “text boxes” to show dialogue and  
conversations while the TV program is in  
progress.  
Press the CC button on the  
remote to display the current Closed  
CC Off  
1
2
Caption setting.  
Press the CC button repeatedly  
to choose from the four Closed  
Caption options (CC Off, CC1,  
CC2, or CC Mute). CC Mute will  
activate Closed Captioning when the  
MUTE button is pressed.  
CC Off  
CC1  
POWER  
CH  
1
4
2
5
8
0
3
6
When finished, press the STA-  
CH  
7
9
TUS /EXIT button to remove the  
3
A/CH  
CC  
VOL  
VOL  
CC2  
menu from the TV’s screen.  
3
STATUS  
EXIT  
CC Mute  
MENU  
1
2
SLEEP  
MUTE  
SURF  
SMART  
PICTURE SOUND  
HELPFUL HINT  
MAGNAVOX  
Not all TV programs and prod-  
uct commercials are made with  
Closed Caption (CC) information  
included. Neither are all Closed  
Caption modes (CC1, or CC2) nec-  
essarily being used during the trans-  
mission of a closed caption program.  
Refer to your area's TV program list-  
ings for the stations and times of  
Closed Caption shows.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTING THE SLEEPTIMER CONTROL  
22  
our TV can be set to automatically turn  
Yitself off at a given amount of time.  
Press the SLEEP button on the  
remote control and the SLEEP  
1
timer display will appear on the  
screen.  
Sleep 15  
Press the SLEEP button repeat-  
edly to pick the amount of time  
2
(15, 30, 45, 60, 90, 120, 180, or 240  
minutes) before the TV will turn  
itself off.  
Sleep 15  
Sleep 30  
Sleep 45  
Sleep 60  
Sleep 90  
Sleep 120  
Sleep 180  
Sleep 240  
Sleep off  
NOTE: An on-screen count down will  
appear during the last minute before the  
TV shuts itself off. If any button is  
pressed during the last minute of the  
countdown, the Sleeptimer setting will  
be cancelled.  
POWER  
1
4
2
5
8
0
3
CH  
6
CH  
7
9
A/CH  
CC  
VOL  
VOL  
STATUS  
EXIT  
1
2
MENU  
SLEEP  
MUTE  
SURF  
SMART  
PICTURE SOUND  
During the last 10  
seconds of a  
Sleeptimer setting,  
an on-screen dis-  
play will read  
During the last minute  
of a Sleeptimer setting,  
an on-screen count  
down will be displayed.  
Pressing any button dur-  
ing the last minute will  
cancel the Sleeptimer.  
MAGNAVOX  
GOOD BYE.  
Good Bye  
9 Sec  
45 Sec  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE SMARTPICTURE™ CONTROL  
23  
hether you’re watching a movie or a  
Wsporting event, your TV has automat-  
ic video control settings matched for your  
current program source or content.  
Press the SMART PICTURE  
button on the remote control. The  
current Smart Picture setting will be  
displayed on the screen.  
1
Personal  
Press the SMART PICTURE  
button repeatedly to select either  
2
PERSONAL, MOVIES, SPORTS,  
WEAK SIGNAL, or MULTIMEDIA  
picture settings.  
POWER  
1
4
2
5
8
0
3
6
Movies  
Sports  
CH  
NOTE: The way you choose to set the  
Picture Menu Controls will become your  
PERSONAL setting.  
CH  
7
9
A/CH  
CC  
VOL  
VOL  
Weak Signal  
Multimedia  
STATUS  
EXIT  
MENU  
1
2
SLEEP  
MUTE  
SURF  
SMART  
PICTURE SOUND  
MAGNAVOX  
MOVIES - Preset picture  
options for watching  
Video Tapes, or DVDs.  
SPORTS - Preset pic-  
ture options for watching  
sporting events.  
WEAK SIGNAL -  
Preset picture options for  
watching programs where  
the reception is not at its  
best.  
MULTIMEDIA - Preset  
picture options for use  
with video gaming.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE SMARTSOUND™ CONTROL  
24  
he Smart Sound feature allows the lis-  
Ttener to select between four different  
factory set sound options.  
Press the SMART SOUND but-  
ton on the remote control. The cur-  
rent Smart Sound setting will appear  
in the middle of the screen.  
1
Personal  
Press the SMART SOUND but-  
ton repeatedly to toggle between  
the four settings. (PERSONAL,  
VOICE, MUSIC, or THEATRE)  
2
POWER  
CH  
1
4
2
5
8
0
3
6
Theatre  
Music  
Voice  
NOTE: The way you choose to set the  
Sound Menu Controls will become your  
PERSONAL setting.  
CH  
7
9
A/CH  
CC  
VOL  
VOL  
STATUS  
EXIT  
MENU  
1
2
SLEEP  
MUTE  
SURF  
SMART  
PICTURE SOUND  
MAGNAVOX  
THEATRE - Preset  
sound options for watch-  
ing movies.  
MUSIC - Preset sound  
options for musical pro-  
gramming where there is  
little or no dialogue.  
VOICE - Preset sound  
options for programming  
where heavy dialogue is  
present.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE SMARTSURF™ CONTROL  
25  
martSurf lets you set up to eight chan-  
Snels in a quick viewing list. Then, you  
can use the SURF button on the remote  
control to switch between different TV pro-  
grams that currently interest you.  
10  
Surf  
10  
Add  
Press CH +/– or the Number  
buttons to select a channel to add  
to the SURF list.  
1
Surf List Empty  
10  
Surf  
10  
Delete  
Press SURF while the channel  
number appears.  
POWER  
CH  
1
4
2
5
8
0
3
6
2
3
CH  
7
9
Press 3 or 2 to add the chan-  
nel to the SURF list or delete  
A/CH  
CC  
VOL  
VOL  
STATUS  
EXIT  
it from the list. An on-screen  
message will indicate whether you  
are adding or deleting the channel.  
Repeat steps 1 through 3 to add  
additional channels (up to eight) to  
the SURF list.  
MENU  
12  
SLEEP  
MUTE  
SURF  
SMART  
12  
Surf  
PICTURE SOUND  
10  
12  
4
Add  
MAGNAVOX  
12  
Surf  
10  
12  
4
Delete  
Press SURF repeatedly  
during TV viewing to scan  
through the channels in  
the SURF list.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ALTERNATE CHANNEL  
26  
our remote control has an Alternate  
YChannel button that allows you to toggle  
between the current and previous channel.  
For instance, if you are watching two games  
on TV, you can enter the channel numbers  
once and flip between the two channels  
with the touch of only one button.  
After entering the two channels numbers,  
so that one is the last viewed channel and  
the other is the current channel, follow the  
step below.  
POWER  
CH  
1
4
2
5
8
0
3
6
CH  
7
9
A/CH  
CC  
VOL  
VOL  
Press the A/CH button on the  
STATUS  
EXIT  
remote control. The channels will  
toggle between the current channel  
and the last viewed channel.  
1
MENU  
SLEEP  
MUTE  
SURF  
SMART  
PICTURE SOUND  
MAGNAVOX  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
27  
No Power  
Remote Does Not Work  
•Check the TV power cord. Unplug the TV,  
wait 10 seconds, then reinsert the plug into  
the outlet and push the POWER button  
again.  
•Check that the outlet is not on a wall  
switch.  
•Check the batteries. If necessary, replace  
them with 2 AA Heavy Duty (Zinc  
Chloride) or Alkaline batteries.  
•Clean the remote control and the remote  
control sensor window on the TV.  
•Check the TV power cord. Unplug the  
TV, wait 10 seconds, then reinsert the  
plug into the outlet and push the POWER  
button again.  
•Be sure the fuse is not blown on the AC  
power strip, if one is being used.  
No Picture  
•Be sure the fuse is not blown on the AC  
power strip, if one is being used.  
•Check to be sure the TV outlet is not on  
a wall switch.  
TV Displays Wrong Channel or No  
Channels Above 13  
•Repeat channel selection.  
•Check antenna connections. Are they  
properly secured to the TV's ANT 75Ω  
plug?  
•Check the TUNER MODE control for the  
correct tuner setting.  
•Try running the Auto Program feature to  
find all available channels.  
•Press the CH+ or CH- buttons on the  
remote to make sure the correct signal  
source is selected (FRONT or Current  
Channel).  
•Add the desired channel numbers (using  
the CHANNEL EDIT control) into the  
TV’s memory.  
•Check to be sure the TUNER MODES are  
set to the CABLE option and run the Auto  
Program feature to find all available chan-  
nels.  
Sound  
No  
•Check the VOLUME buttons.  
•Check the MUTE button on the remote  
control.  
•If you’re attempting to hook up auxiliary  
equipment, check the audio jack connec-  
tions located on the front of the TV.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CARE AND CLEANING  
28  
WARNING Concerning Stationary  
Images on the TV Screen:  
PLACEMENT OF THE TV  
• To avoid cabinet warping, cabinet color  
changes, and increased chance of set  
failure, do not place the TV where tem-  
peratures can become excessively hot;  
for example, in direct sunlight or near a  
heating appliance.  
Do not leave stationary or letterbox  
images on screen for extended peri-  
ods of time. This can cause uneven  
picture-tube aging.  
Normal use of the TV should involve the  
showing of pictures that contain constantly  
moving and changing images that fill the  
screen. Be careful not to leave nonmoving  
images on screen for extended periods of  
time, or to display the same images on  
screen too frequently, because subtle  
ghost images can be left on the picture  
tubes. Sources of stationary images may  
be DVD disks, laser disks, video games,  
CD-i disks, videotapes, digital television  
boxes, broadcast channels, cable channels,  
satellite channels, and others. Here are  
some examples of stationary images  
(this is not an all-inclusive list; you  
may encounter others in your view-  
ing):  
• Be sure to allow a free flow of air to  
and from the perforated back cover of  
the set.  
CLEANING  
• To avoid possible shock hazard, be sure  
the TV is unplugged from the electrical  
outlet before cleaning.  
• Regularly dust the TV with a dry, non-  
scratching duster to keep the TV clean.  
• When cleaning the TV, take care not to  
scratch or damage the screen surface.  
Avoid wearing jewelry or using anything  
abrasive. Do not use household clean-  
ers. Wipe the front screen with a clean  
cloth dampened with water. Use even,  
easy, vertical strokes when cleaning.  
• Gently wipe the cabinet surfaces with a  
clean cloth or sponge dampened in a  
solution of cool, clear water and a mild  
soap or detergent. Use a clean, dry  
cloth to dry the wiped surfaces.  
DVD menus—listings of DVD disk  
content  
Letterbox black bars—shown at the  
top and bottom of the TV screen when  
a wide screen (16:9) movie is viewed  
on a TV with standard (4:3) aspect  
ratio.  
• Occasionally vacuum the ventilation  
holes or slots in the back cover of the  
set.  
Video-game images and score-  
boards  
Television station logos—present a  
problem if they are bright and station-  
ary; moving or low-contrast graphics  
are less likely to cause uneven aging of  
the picture tube  
• Never use thinners, insecticide sprays,  
or other chemicals on or near the cabi-  
net, as they might cause permanent  
marring of the cabinet finish.  
Stock-market tickers—presented at  
the bottom of the TV screen  
Shopping channel logos and pric-  
ing displays—bright and shown con-  
stantly or repeatedly in the same loca-  
tion on the TV screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GLOSSARY  
29  
Auto Programming • The procedure of  
adding or deleting channel numbers into  
the Television’s memory circuits. In this  
format the Television “remembers’’ only  
the locally available or desired channel  
numbers and skips over any unwanted  
channel numbers.  
Remote Sensor Window • A window  
or opening found on the Television con-  
trol panel through which infrared remote  
control command signals are received.  
Status/Exit • Allows the user to quickly  
confirm what channel number is currently  
being viewed. Status can also be used to  
clear the Television of on screen displays  
or information (rather than waiting for the  
displays to “time out” or automatically dis-  
appear from the screen).  
Coaxial Cable • A single solid antenna  
wire normally matched with a metal plug  
(F-type) end connector that screws (or  
pushes) directly onto a 75 Ohm input  
found on the Television or VCR.  
Surf • The action of scanning specific  
channel in a limited channel list.  
Closed Caption • Broadcast standard  
which allows you to read the voice con-  
tent of television programs on the TV  
screen. Designed to help the hearing  
impaired this feature uses on-screen "text  
boxes" to show dialogue and conversa-  
tions while the TV program is in progress.  
Twin Lead Wire • The more commonly  
used name for the two strand 300 Ohm  
antenna wire used with many indoor and  
outdoor antenna systems. In many cases  
this type of antenna wire requires an addi-  
tional adapter (or balun) in order to con-  
nect to the 75 Ohm Input terminals  
designed into the more recent Televisions  
and VCRs.  
Side Audio/Video Inputs • Located on  
the side of the TV these connectors  
(phono type plug) are used for the input  
of audio and video signals. Designed for  
easy use with VCRs or cameras.  
Tuner Mode • Feature control settings  
made by the TV. Designed for first time  
set up and use. Settings for signal connec-  
On Screen Displays (OSD) • Refers to  
the wording or messages generated by the tions (antenna or cable TV), plus channel  
television (or VCR) to help the user with program memory are held in the TV's  
specific feature controls (color adjustment, memory (even if the set is unplugged and  
programming, etc.).  
moved to a new location.)  
Menu • An on-screen listing of feature  
controls shown on the Television screen  
that are made available for user adjust-  
ments.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INDEX  
30  
Alternate Channel . . . . . . . . . . . . . . . . . .26  
Antenna Basic Connection . . . . . . . . . . . .1  
Automatically Program TV . . . . . . . . . . . .9  
AVL . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12  
Balance . . . . . . . . . . . . . . . . . . . . . . . . . . .12  
Basic Cable Connection . . . . . . . . . . . . . .1  
Basic Remote Operation . . . . . . . . . . . . . .4  
Basic Television Operation . . . . . . . . . . . .4  
Bass Boost . . . . . . . . . . . . . . . . . . . . . . . .12  
Brightness . . . . . . . . . . . . . . . . . . . . . . . .11  
Cable Box Connection . . . . . . . . . . . . .1-2  
Cable TV Control (Tuner Mode) . . . . . . .8  
Care and Cleaning . . . . . . . . . . . . . . . . . .28  
Channel Edit . . . . . . . . . . . . . . . . . . . . . .10  
Closed Caption Control . . . . . . . . . . . . .21  
Color . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
Contrast . . . . . . . . . . . . . . . . . . . . . . . . . .11  
Format Control . . . . . . . . . . . . . . . . . . . .13  
Front Audio/Video Input Jacks . . . . . . . . .3  
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . .29  
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . .30  
Language Control . . . . . . . . . . . . . . . . . . .7  
Limited Warranty . . . . . . . . . . . . . . . . . .32  
Picture Menu Controls . . . . . . . . . . . . . .11  
Remote Batteries . . . . . . . . . . . . . . . . . . . .4  
Remote Control Button Descriptions .5-6  
Sharpness . . . . . . . . . . . . . . . . . . . . . . . . .12  
Sleeptimer . . . . . . . . . . . . . . . . . . . . . . . .22  
SmartLock™ Controls  
Access Code . . . . . . . . . . . . . . . . . . . . .15  
Block Channels . . . . . . . . . . . . . . . . . . .16  
Blocking/Clearing All Channels . . . . . . .17  
Movie Ratings . . . . . . . . . . . . . . . . . . . .18  
Other Blocking Options . . . . . . . . . . . .20  
TV Ratings . . . . . . . . . . . . . . . . . . . . . . .19  
Understanding SmartLock™ . . . . . . . .14  
SmartPicture™ Control . . . . . . . . . . . . .23  
SmartSound™ Control . . . . . . . . . . . . . .24  
SmartSurf . . . . . . . . . . . . . . . . . . . . . . . .25  
Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . .12  
Tint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
Treble Boost . . . . . . . . . . . . . . . . . . . . . .12  
Troubleshooting . . . . . . . . . . . . . . . . . . .27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTES  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAGNAVOX LIMITED WARRANTY  
Ninety (90) Days Labor & One (1) Year Parts & One (1) Year Display  
MAGNAVOX warrants this product against  
defect in material or workmanship, subject to  
any conditions set forth as follows:  
A product that requires modification or  
adaptation to enable it to operate in any  
country other than the country for which  
it was designed, manufactured, approved  
and/or authorized, or repair of products  
damaged by these modifications.  
PROOF OF PURCHASE:  
You must have proof of the date of purchase  
to receive warranted repair on the product.  
A sales receipt or other document showing  
the product and the date that you purchased  
the product as well as the authorized retailer  
included, is considered such proof.  
Damage occurring to product during ship-  
ping when improperly packaged or cost of  
associated packaging.  
Product lost in shipment and no signature  
verification of receipt can be provided.  
A product used for commercial or institu-  
tional purposes (including but not limited  
to rental purposes).  
COVERAGE:  
(If this product is determined to be defective)  
LABOR: For a period of ninety (90) days  
from the date of purchase, Magnavox will  
repair or replace the product, at its option, at  
no charge, or pay the labor charges to any  
Magnavox authorized service center. After  
the period of ninety (90) days, Magnavox will  
no longer be responsible for charges  
incurred.  
Products sold AS IS or RENEWED.  
TO OBTAIN WARRANTY SERVICE  
IN THE U.S.A., PUERTO RICO, OR  
U.S. VIRGIN ISLANDS…  
Contact Magnavox Customer Care Center  
at:  
PARTS: For a period of one (1) year,  
Magnavox will supply, at no charge, new or  
rebuilt replacement parts in exchange for  
defective parts. Magnavox authorized service  
centers will provide removal and installation  
of the parts under the specified labor warran-  
ty.  
1-800-705-2000  
TO OBTAIN WARRANTY SERVICE  
IN CANADA…  
1-800-661-6162 (French Speaking)  
1-800-705-2000 (English or Spanish  
Speaking)  
REPAIR OR REPLACEMENT AS PROVIDED  
UNDER THIS WARRANTY IS THE EXCLU-  
DISPLAY: For a period of one (1) year from  
the date of purchase, Magnavox will supply, at SIVE REMEDY FOR THE CONSUMER.  
no charge, a new or rebuilt active display  
device in exchange for the defective display.  
Magnavox authorized service centers will  
provide removal and installation of the parts  
under the specified labor warranty. (PTV  
screens carry a thirty (30) day replacement  
warranty.)  
MAGNAVOX SHALL NOT BE LIABLE FOR  
ANY INCIDENTAL OR CONSEQUENTIAL  
DAMAGES FOR BREACH OF ANY  
EXPRESS OR IMPLIED WARRANTY ON  
THIS PRODUCT. EXCEPT TO THE  
EXTENT PROHIBITED BY APPLICABLE  
LAW, ANY IMPLIED WARRANTY OF  
MERCHANTABILITY OR FITNESS FOR A  
PARTICULAR PURPOSE ON THIS PROD-  
UCT IS LIMITED IN DURATION TO THE  
DURATION OF THIS WARRANTY.  
EXCLUDED FROM WARRANTY  
COVERAGE  
Your warranty does not cover:  
Labor charges for installation or setup of  
the product, adjustment of customer con-  
trols on the product, and installation or  
repair of antenna systems outside of the  
product.  
Some states do not allow the exclusions or  
limitation of incidental or consequential dam-  
ages, or allow limitations on how long an  
implied warranty lasts, so the above limita-  
tions or exclusions may not apply to you. In  
addition, if you enter into a service contract  
agreement with the MAGNAVOX partner-  
ship within ninety (90) days of the date of  
sale, the limitation on how long an implied  
warranty lasts does not apply.  
Product repair and/or part replacement  
because of improper installation, connec-  
tions to improper voltage supply, abuse,  
neglect, misuse, accident, unauthorized  
repair or other cause not within the con-  
trol of Magnavox.  
This warranty gives you specific legal rights. You may have other rights which vary from state/province to  
state/province.  
Magnavox, P.O. Box 671539, Marietta, GA. 30006-0026  
(Warranty: 4835 710 28125)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Lantronix Network Router 2100E User Manual
Lego Games 79011 User Manual
LG Electronics Car Video System W1946S User Manual
LG Electronics Flat Panel Television 0910 REV04 User Manual
LG Electronics Washer Dryer DLE1101W User Manual
Life Fitness Home Gym SU75 User Manual
Marley Engineered Products Air Conditioner SRA DS User Manual
Marshall Amplification Musical Instrument Amplifier MG15MSII User Manual
Maytag Cooktop ELECTRIC COOKSTOP User Manual
Mercury Automobile 2009 Mariner User Manual