Marantz Flat Panel Television MAR0076 User Manual

AV1

MAINS INLET

CVBS

Y/ C

S-VHS

AUDIO IN

AUDIO OUT

CVBS

AV3

AV4

AUDIO

AV2

AUDIO IN

VGA IN

VGA OUT

CABLE

OUT

VGA MONITOR

EXTERNAL 1

EXTERNAL 2

EXTERNAL 3

NO FUNCTION

MAINS INLET

CONSTANT LEVEL OUT

NO FUNCTION

SURROUND SOUND CENTER IN

AUDIO IN

NO FUNCTION

OUT

VGA MONITOR

ANTENNA

Download from Www.Somanuals.com. All Manuals Search And Download.

Your rem ote con trol

Rem ote con trol icon

Device m en u

Press and hold for 3

seconds to go to setup

Open a component’s

control panels

Sen din g eye

Direct access button s

(IR tranmitter)

Send commands

to devices

Sound mute

Channel up (+) / down (-)

Volume up (+) / down (-)

MUTE

Hom e

Scroll button s

Easy access to

all components

to display previous

and next control panel

CHANNEL

Con trast dial

Macro m en u

Mode m en u

Customize the remote

control

VOLUME

Execute stored lists

of command

Left an d righ t button s

Blackligh t button

Activate the commands

shown immediately

above the buttons

press button to

activate blacklight

Keypad

Learn in g eye

Sub +

Sub -

Con trol pan el

for learning commands

from other remote

controls

Tab buttons to send

commands to

components

Serial port

Con trol m en u

to link the remote

to a computer

Tab button to select

menu item

Modes

Normal use controlling components

Learn commands from other remote controls. When a macro panel

is displayed, this button changes to “REC” for recording macros.

Assign letters ans symbols to buttons ans commands.

Add a new component or group macros.

Delete a button, component, or macro group.

Change the order of commands in a menu.

1-2 Preparation

Download from Www.Somanuals.com. All Manuals Search And Download.

Preparation

& Place the receiver box wherever you want, but leave at least 5 cm space

free all around the box for ventilation and do not cover the ventilation

openings, (e.g. on the ground, in a cupboard, behind a wall, in another

room....). To prevent any unsafe situations, do not place any objects on

top of the monitor or the receiver. No naked flame sources, such as

lighted candles, shoud be placed on or in the vicinity. Avoid heat,

direct sunlight and exposure to rain or water. The equipment shall

not be exposed to dripping or splashing and no objects filled with

liquids, such as vases, shall be placed on it.

é Connect the supplied aerial cable 1 and the VGA cable 2 as shown

in the inside frontcover of this handbook. Make sure all screws of the

cable 2 are tightened well. Connect audio cinch connectors to the

“constant level out” on the receiver box 3 and to your audio amplifier

or receiver. See also page 20.

“ To connect your computer, see p. 22.

To connect other peripherals, see p. 20.

In order to obtain the best result, please use only the supplied antenna

cables between the receiver box and videorecorder, and between

videorecorder and antenna connector.

‘ Insert the mains cord supplied 4 (with filter) into the MAINS INLET at

the back of the monitor and the mains cord 5 at the back of the

receiver. Put both in the wall sockets.

Please, on ly use th e m ain s cord 4 (with filter) supplied with th e

m on itor, for th e m on itor an d th e m ain s cord 5 supplied with th e

receiver, on ly for th e receiver.

( Rem ote con trol:

Slide the battery door off the back of the Remote Control.

Remove the plastic AA battery tray from the battery compartment

Insert the battery pack (included with the recharging dock)

as indicated on the side of the battery pack.

Slide the battery door back on.

After a few seconds, the Remote Control starts up automatically and

beeps twice to indicate that it has finished starting up.

Plug the power adapter into a wallet outlet and connect it to the

recharging dock.

Place the Remote Control on the recharging dock.

Recharging starts automatically. The light on the front of the

recharging dock indicates charging takes place. When the battery

pack is fully charged, the light goes off.

§ Switch th e TV on : Press the power button A at the front of the

monitor and the one on the front of the receiver box.

A green indicator lights up and the screen comes on.

ch an n el +/ -

If the indicator is red, press the

control.

key on the remote

The green indicator blinks every time you press a key on the remote

control. When you switch on your set for the first time, the menu

LANGUAGE automatically appears on the screen. The explanation

appears in different languages one at a time.

Preparation

1-3

Download from Www.Somanuals.com. All Manuals Search And Download.

TV Text

Dual screen

Cursor

In stallation

MUTE

CHANNEL

INSTALLATION

Select th e

m en u

Adjustments

Keypad

VOLUME

Picture

Power

& Touch the control menu on the remote (TV mode).

Installation

é Select “settings” and press the “installation” key

Switch to...

Settings

Sub +

Sub -

7/9

To use th e m en us

& Touch the control menu and select “cursor”

é Use the cursor in the up/down, left/right directions to select a menu

item.

TV Text

Dual screen

Cursor

MUTE

“ Press the OK key to activate.

CHANNEL

Adjustments

Keypad

‘ Press one of the colour menu keys of the remote control to return or to

VOLUME

switch menu off.

Power

I NSTALLATI ON

Me nu La ngua ge

Count r y

Aut oma t i c I ns t a l l a t i on

Ma nua l I ns t a l l a t i on

Gi ve Na me

I NSTALLATI ON

Me nu La ngua ge

Count r y

Aut oma t i c I ns t a l l a t i on

Ma nua l I ns t a l l a t i on

Gi ve Na me

Switch to...

Settings

Cursor

Sub +

Sub -

6/9

Re s huf f l e

Fa vour i t e Pr ogr a mme s

De c ode r / De s c r a mbl e r

Se t up

Fa vour i t e Pr ogr a mme s

De c ode r / De s c r a mbl e r

Se t up

Green; sound menu

Yellow; features menu

Red;

picture menu

Store TV ch an n els

Select th e m en u lan guage an d coun try

Blue; program list

Main menu

Select / Adjustments

Activate

First, select your language and country.

& Select Men u Lan guage in the INSTALLATION menu and press the OK key.

é Use the cursor left/right to select your language and press the OK key.

“ Select Coun try and press the OK key.

Me nu La ngua ge

Count r y

Aut oma t i c I ns t a l l a t i on

Ma nua l I ns t a l l a t i on

I NSTALLATI ON

‘ Select the country where you are now located and press the OK key.

Select Oth er when none of the countries applies.

Engl i s h

• • •

. . .

• • •

. . .

• • •

LANGUAGE

Remark: If the language displayed on screen does not correspond with a

language you recognise or you want, act as follows:

& Press one of the colour menu keys (R,G,Y, or B) in the “cursor” control

panel, on the remote to switch menu off.

• • •

COUNTRY

• • •

é Press the “installation” key in the “settings” control panel on the remote.

Now the INSTALLATION menu is displayed, but is still in the language you

do not recognise or you do not want.

Ot he r

“ Press the cursor right in the “cursor” control panel

‘ Now you can select your language with the cursor left/right.

You can now search for and store the TV channels in two different

ways: using autom atic in stallation or m an ual in stallation (tuning-in

channel by channel). Select your choice and press the OK key.

1-4 In stallation

Download from Www.Somanuals.com. All Manuals Search And Download.

Autom atic in stallation

& In the Automatic installation menu select On with the cursor left/right

and press the OK key to activate the searching. All TV channels are

searched for and stored automatically.

AUTOMATI C

Aut oma t i c I ns t a l l a t i on

I NSTALLATI ON

Wait until the message Ready is displayed at the bottom of the screen.

Se a r c hi ng

O%. . . . . . . . . . . . . . . . . . . . . 100%

If a cable system or a TV channel which broadcasts ACI (Automatic

Channel Installation) or a TV channel transmitting a teletext page with

the frequencies and programme names of all the TV channels which

can be received, is detected, the search is stopped and the programme

list appears. The programme list is automatically filled with all the

programme numbers and names of the TV channels transmitted.

10 . . .

11 . . .

12 . . .

13 . . .

BBC1

BBC2

I TV

. . .

. .

. . .

It is possible that the cable company or the TV channel displays a

broadcast selection menu. Layout and items are defined by the cable

company or the TV channel. Make your choice with the cursor and press

the OK key.

. . .

AUTOMATI C

Aut omat i c I ns t al l at i on

Of f

I NSTALLATI ON

é Press one of the colour menu keys (R,G,Y or B)on the door of the

remote control to return to the INSTALLATION menu.

Man ual in stallation

Searching for and storing TV channels is done channel by channel.

You must go through every step of the Manual Installation menu.

Selection Mode is only present and lights up if the country selected also

offers the channel option (C-channels for aerial channels, S-channels for

cable channels). You can choose either channel or frequency mode.

. . .

& Select the TV system

Select the country or part of the world from where you want to receive

the TV channel. If you are connected to a cable system, select your

country or part of the world where you are now located.

( Sel ect i on Mode)

Sys t em

Sear ch

Pr ogr amme No

St or e

MANUAL

I NSTALLATI ON

é Search for a TV channel

The frequency or the channel number increases until a TV channel is

found. In case of poor reception, you can improve the reception by

adjusting the frequency with the ch an n el +/ - keys.

Direct selection of a TV ch an n el

If you know the frequency, the C- or S-channel number, enter the 3

digits of the frequency directly with the digit keys 0 to 9 (e.g. 048).

“ Enter the programme number.

‘ To store your TV channel, select Store and press the OK key.

Repeat steps & to ‘ to store another TV channel.

( To exit from the menu press one of the colour menu keys (R,G,Y, or B)

on the remote control.

After the new or extra TV channel has been stored, the TV automatically transfers the TV channel(s) to the video recorder

provided with the EasyLink function. The message: Ea syLink : Downloa ding Pr esets ... appears at the bottom of the

screen. The programme list of the video recorder is now equal to the one of the TV.

In stallation

1-5

Download from Www.Somanuals.com. All Manuals Search And Download.

Give n am e

It is possible to change the name stored in the memory or to assign a

Me nu La ngua ge

Count r y

Aut oma t i c I ns t a l l a t i on

Ma nua l I ns t a l l a t i on

Gi ve Na me

I NSTALLATI ON

name to a TV channel for which a name has not yet been entered. A

name with up to 5 letters or numbers can be given to the programme

numbers 0 to 99. For example SUPER, BBC1,...

Between 99 and 0, in the column in the middle, you can also name any

peripherals that are connected to a euroconnector.

Re s huf f l e

Fa vour i t e Pr ogr a mme s

De c ode r / De s c r a mbl e r

Se t up

& Select Give Nam e in the INSTALLATION menu and press the OK key.

é Select the programme number.

“ Press the OK key.

EXT1

EXT2

EXT3

FRONT

GI VE NAME

BBC1

BBC2

. . . .

‘ Select the character with the cursor up/down.

( Select the following position with the cursor right.

§ Select the following character.

. . . . . . .

è Press the OK key when finished.

Press one of the colour menu keys (R,G,Y, or B) to return to the INSTALLATION

menu. Spaces, numbers, language dependent characters and so on are

located between Z and A.

Resh uffle th e program m e list

According to your preference you can change the order of the stored

TV channels.

10 . . .

11 . . .

12 . . .

13 . . .

14 . . .

15 . . .

. . . . . .

RESHUFFLE

BBC1

BBC2

. . . .

& Select Resh uffle in the INSTALLATION menu and press the OK key.

é Select the programme number you want to change.

Use the cursor left/right to select another column of the programme list.

“ Press the OK key.

. . . . . .

‘ Select the new number you want to exchange it with.

( Press the OK key.

Repeat the operation until all TV channels are allocated as you like.

Press one of the colour menu keys (R,G,Y, or B) to return to the INSTALLATION menu.

Select Favourite TV ch an n els

After leaving the installation you can browse through the TV channels

and externals by pressing the ch an n el +/ - keys. Only those TV channels

and externals which are in the favourite list will be displayed. Non-favourite

TV channels and externals can still be selected with the digit keys.

You can also do this for a programme number reserved for the

programmes you receive from your decoder.

EXT1

EXT2

EXT3

FRONT

. . .

10 . . .

11 . . .

12 . . .

13 . . .

14 . . .

15 . . .

. . . . . .

& Select Favourite Program m es in the INSTALLATION menu and press

the OK key.

é Select your programme number.

“ Select Favourite with the cursor up/down.

‘ Select Yes or No with the cursor left/right.

. . . . .

FAVOURI TE

PROGRAMMES

Pr ogr a mme Numbe r

Fa vour i t e

( Repeat é to ‘ for every TV channel or extenral you want to make

a favourite or a non-favourite TV channel or external.

Press one of the colour menu keys (R,G,Y, or B) to return to the INSTALLATION menu.

1-6 In stallation

Download from Www.Somanuals.com. All Manuals Search And Download.

Defin e Decoder/ Descram bler program m e n um bers

If a decoder or a descrambler is connected, see p. 20, you can define

one or more programme numbers as decoder programme numbers.

& Select Decoder/ Descram bler in the INSTALLATION menu and press the

Pr ogr a mme

De c ode r St a t us

OK key.

DECODER/

DESCRAMBLER

é Select the programme number with the cursor up/down. Select the

programme number under which you have stored the programme

coming from your decoder with the digit keys

“ Select Decoder Status with the cursor up/down.

• Press the cursor left/right to select the input used to connect your

decoder: TV, EXT1 or EXT2.

• Select TV if you do not want the selected programme number being

activated as a decoder programme number.

‘ Use the menu key R (red) to return or switch menu off.

If the TV is connected to a video recorder with the EasyLink function, the

message Ea syLink: Downloa ding Pr esets.... appears at the bottom of

the screen. The programme list of the video recorder is equal again to the

one of the TV.

In stallation

1-7

Download from Www.Somanuals.com. All Manuals Search And Download.

In stall TV Setup

Me nu La ngua ge

Count r y

I NSTALLATI ON

The Setup menu allows you to adjust initial settings, i.e. those which are

not related to the installation of the TV channels.

The Setup menu contains items that control the settings of the TV’s

functions, features, services and peripherals you may have connected.

Aut oma t i c I ns t a l l a t i on

Ma nua l I ns t a l l a t i on

Gi ve Na me

Re s huf f l e

Fa vour i t e Pr ogr a mme s

De c ode r / De s c r a mbl e r

Se t up

& Select Setup in the INSTALLATION menu and press the OK key.

é Use the menu key R (red) to return or switch menu off.

Ext2 Output

See Record with your video recorder, p. 24.

Ext 2 Out put

SETUP

I nf or ma t i on Li ne

Pi c t ur e Mut e

Aut o For ma t

In for m ation Lin e

Press the cursor left/right to select On .

After the selection of a TV programme or after pressing the i key in

the “keypad” control panel on the remote control, a TV channel which

broadcasts teletext may transmit the name of the TV channel or the

programme name or another message which appears briefly in the

information line at the bottom of the screen.

When selected Off, the information line will only appear after pressing

the i key, and not after the selection of a TV channel.

Picture Mute

Press the cursor left/right to select a Blue or Black screen when there is

no picture or information. In VGA mode always black mute is used.

Auto For m at

When Yes is selected with the cursor left/right, Auto format is part of the

picture formats that are selectable with the q key in the “keypad” control

panel. With the picture format Auto for m at, the picture will fill the screen

as much as possible. See p. 9.

1-8 In stallation

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation

Picture form at

0/ 9 digit keys

Use of th e rem ote con trol

Press this key repeatedly to

select an other picture form at:

4:3, Movie Expand 14:9, Movie

Expand 16:9, with or without

subtitles, SuperWide,

To select a TV channel

For a two digit program number,

enter the second digit within 2

seconds.

WideScreen or AutoForm at.

Previous program

(When AutoFormat is set to Yes

in the Setup menu) AutoFormat

makes to picture fill the screen as

much as possible. Super Wide

removes the black bars on the side

of 4:3 program without causing

apparent distortion.

The previously selected TV

channel is displayed.

Con trol m en u

When this button in touched

the control menu appears.

The menu options shown can be

selected and will open the

specific commands related to the

mentioned funtionality.

When in Movie Expand 14:9 or

16:9 picture format, you can make

subtitles visible with the cursor

up/down in the “Cursor”

MUTE

control panel on the remote control.

When selecting the “Power” a

special control panel appears.

When selecting the “power off”

option the option the set is

switched off and the red indicater

lights up in front of the receiver

and the screen.

CHANNEL

Sometimes also video recorders

programs carry special signals

which automatically switch the TV

into the correct format.

VOLUME

Note: in VGA mode press this key

to switch between a 4:3, a 16:9 or

Wide VGA picture format. In

Dualscreen mode press this

key to switch between a full or a

squeezed picture format.

To switch the TV on agian press

either the “Power on” key, the

Channel up (+) / down (-) or the

digit keys in the “Keypad” control

panel.

Keypad

Bilin gual ch oice an d soun d

m ode selection

Sub +

Sub -

1/9

TV Text

MUTE

Dual screen

CHANNEL

• press this key to switch from

Stereo to Mon o sound, in case of

stereo transmission or from

Digital Soun d to Digital Soun d

Available in case of digital

transmission.

Cursor

VOLUME

Power on

Adjustments

Power off

Settings

Power

Sub +

Sub -

9/9

Switch to...

Keypad

• To choose between language I

(Dual I) or language II (Dual II), in

case of bilingual transmission.

The setting is separately stored for

each TV channel.

Select your com puter or oth er

periph erals

Perm an en t program n um ber

screen in form ation

MUTE

Press this key opens a special control

panel to select EXT1, EXT2, EXT3,

VGA or TV Ch an n els according to

where you connected your pripherals

(see p. 25)

CHANNEL

VOLUME

Press for 3 seconds to activate/de-

activate the continuos display of the

program number. Press briefly to

display the information about the

selected channel or external, it’s

name, the sound mode, picture

format setting, the selected DNR

setting and remaining time set with

the sleeptimer.

VGA

Front

Scan

Go back

Remark: in VGA mode only some

keys are valid (see VGA menu p.25)

Sub +

Sub -

8/9

Use of th e rem ote con trol 1-9

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation

DNR Digital Noise Reduction

Multi screen

MUTE

To reduce the image noise and

improve the picture quality when

receiving weak signals.

Press this key to select DNR min,

DNR med, (optimal picture

quality for normal strength

signal), DNR max (for poor

picture quality) or DNR off.

A menu line Mosaic appears.

Select the desired function with

the cursor left or right keys and

press the OK key.

CHANNEL

Scan : The TV channel played in

the favourite list appear

subsequently. Press the channel

up (+) key to select a next series

of 12 channels. After the

DNR

VOLUME

Freeze

selection is finished, press the

key to make the main picture

in the centre of the screen equal

to the active small picture.

The active TV channels or

external, indicated by a red

border, can be selected

When pressed, the displayed

picture is frozen. Press again to

de-activate the frozen picture.

In dual Screen both pictures are

frozen.

Adjustments

Sub +

Sub -

5/9

immediately with the OK key.

Multiscreen is left then.

Ph oto fin ish : The main picture is

displayed in successive frozen

pictures. Press the OK key again

to have a new sequence of frozen

pictures.

Strobe: The picture is

reproduced picture by picture.

Press the OK key again to have a

faster speed. Press the OK key again

to return to a normal picture

reproduction. Press the Multiscreen

button to switch of the mosaic

screen.

MUTE

Sm art Keys

To select predefined picture and

sound settings.

CHANNEL

Person al Preferen ces

Picture

VOLUME

Picture

Restore settings, stored with

Headphone PP store in the

Features menu (see P. 15).

Each time is pressed, a different

picture setting is selected,

Installation

corresponding with a specific

predefined setting of Colour,

Brightness, Contrast, Sharpness,

Tint, DNR, Colour Temperature

and Dynamic Contrast.

In stallation

See P.5

Settings

The smart picture setting is set to

Personal when one of the picture

settings is changed.

Sub +

Sub -

7/9

Remark:The moment you are in

predefined picture setting and

you modify a setting in the picture

menu, all values of the menu will

overwrite the previously made

personal setting.

^1-10Use of th e rem ote con trol

Download from Www.Somanuals.com. All Manuals Search And Download.

TV Text Color keys

0/ 9 digit keys

MUTE

The specific function of these color

buttons is shown on screen in the

To select a TV Text page

number.

TV Text mode

R=Red

CHANNEL

G=Green

Y=Yellow

B=Blue

Select the previously selected txt

page.

VOLUME

TV Text on / off

Pan el Down

See P. 18

To go to the second TV Text

control panel.

TV Text

Sub +

Sub -

2/9

TV Text on / off

For the buttons not explained on

this page see P.19

Tim e display

Pan el up

MUTE

The time, downloaded from the TV

channel (with TV Text) stored on

program number 1 or the lowest

favourite program number greater

than 1, is displayed in the upper left

corner of the screen.

To go the first TV Text control

panel.

CHANNEL

Con tin uous subtitles

TV channels with TV text often

transmit certain programs with

subtitling. Switch on TV Text and

select the proper subtitle page from

the index.

This function is not available when

Continuous Subtitles is switched on.

VOLUME

Sub pages scrollin g

When a selected TV Text page

consists of different subpages, select

with the left or right button the next

(Sub +) of previous (Sub -) subpage.

Press this button to store the

subtitle page. Switch off TV Text.

Everytime a program of the

selected TV channel is subtitled,

the subtitling will be available for

that channel.

TV Text

Sub +

Sub -

3/9

Press this button to switch subtitles

on or off. When switched on and the

symbolof TV Text on/off button

appears, there are no subtitles

available for that program.

Use of th e rem ote con trol 1-11

Download from Www.Somanuals.com. All Manuals Search And Download.

Use of th e m en us

TV Text

Dual screen

Cursor

MUTE

& Select “cursor” in the control menu on the remote control (TV mode)

CHANNEL

é Press the red, green or yellow colour key to display/cancel the PICTURE,

Adjustments

Settings

VOLUME

SOUND or FEATURES menu.

“ Use the cursor in the up/down directions to select a menu item.

‘ Use the OK key to activate.

Power

Cursor

Switch to...

Keypad

( Press the same menu key again to return or to switch the menu off.

Sub +

Sub -

6/9

Picture m en u

Con trast

This control allows you to adjust the contrast levels of the picture.

Brigh tn ess

Green; sound menu

This control allows you to adjust the brightness levels of the picture.

Yellow; features menu

Red; picture menu

Blue; program list

Main menu

Colour

This control allows you to adjust the colour saturation of the picture.

Sh arpn ess

Select / Adjustments

Activate

This control allows you to adjust the edge definiton of a picture.

Tin t (only with NTSC signals)

This control allows you to adjust the colour mix (hue) of a picture.

Colour Tem perature

This control allows you to select the colour temperature of the picture.

Select Nor m al, Cool or War m with the cursor left/right.

Sl e e pt i me r

Chi l d Loc k

He a dphone PP s t or e

Me s s a ge

FEATURES

PI CTURE

Ti me r s

Dyn am ic Con trast

To make the contrast in the darker and the brighter picture areas more

noticeable, it is preferred to select Med or Max.

In certain circumstances it may be preferred to select Min or Off.

Cont r a s t

Br i ght ne s s

Col our

Sha r pne s s

( Ti nt )

Col our Te mpe r a t ur e Nor ma l / Cool / Wa r m

Dyna mi c Cont r a s t

Natural Motion

Natural Motion On reproduces smooth movement which makes it more

natural.

After selecting a new TV channel or external, Natural Motion will

automatically be set to On.

Na t ur a l Mot i on

Sound Mode

He a dphone

SOUND

Soun d m en u

Store the modified adjustments for the headphone Volume and Balance

for all TV channels with h eadph on e PP store in the FEATURES menu.

Soun d m ode

Your TV will choose between stereo or digital sound depending on the

sound the TV channel transmits, unless you make a sound choice.

In case of weak stereo or digital sound signals, due to the transmission,

select analogue or mono.

1-12 Use of th e m en us

Download from Www.Somanuals.com. All Manuals Search And Download.

Headph on e

Vol ume

Ba l a nc e

Sour c e

HEADPHONE

See Connect peripheral equipment, p. 21, for the connection of the

headphone.

• Select the source you want to listen to with your headphone:

Autom atic, TV, EXT1, EXT2 or EXT3 (or the names entered in the Give

Name menu). Select Autom atic if you want to listen to the sound of

the picture you are watching on the screen.

Note: in the Dual Screen picture, you will hear the sound of the left

picture through your headphone, except if a picture from a connected

peripheral has been selected in the right picture. Then you will hear the

sound from the right picture.

• Select TV when you want to listen to the sound of a TV channel.

• In all other cases select the source where you connected your

equipment. The equipment should be switched on, but you don’t need

to watch it.

Use of th e m en us 1-13

Download from Www.Somanuals.com. All Manuals Search And Download.

TV Text

Dual screen

Cursor

MUTE

Features m en u

CHANNEL

& Select “cursor” in the control panel menu on the remote control (TV

Adjustments

Settings

VOLUME

mode)

é Press the yellow key to display/cancel the FEATURES menu.

“ Press the cursor up/down to select a menu item.

‘ Press the OK key to activate.

Power

Cursor

Switch to...

Keypad

Sub +

Sub -

Sleeptim er

With the sleeptimer you can set a time period after which the TV should

switch itself to standby.

The counter runs from Off up to 180 m in .

One minute before the TV is set to go to standby, the remaining

seconds and the message Good Nigh t appear on screen. You can always

switch off your set earlier or change the set time.

Note: when a VGA source is selected, the TV will not go to standby when

the sleeptimer expires.

Select / Adjustments

Activate

Ch ild lock

If the child lock is on, the TV can only be switched on with the remote

control. The PROGRAM - and + keys and VOLUME - or + keys behind the

front door of the receiver cannot be used. In this way you can prevent

unauthorised use of your TV. Also no automatic switching to connected

equipment will occur.

If the message Ch ild lock On appears, the child lock must be switched

off before you can use the PROGRAM - and + keys and the VOLUME - or

+ keys on the receiver.

Sl e e pt i me r

Chi l d Loc k

FEATURES

He a dphone PP s t or e

Me s s a ge

Ti me r s

Headph on e PP store

The Volume and Balance in the headphone menu can be stored in

memory for all TV channels.

Message

With this function you can enter a personal message on 2 lines which

will be displayed automatically when the set is switched on.

For example: I’ll be late this evening. Don’t wait for dinner.

Me s s a ge

. . . . . . . . . . . . . . . . . . . . . . . . . . .

Cha nge

Cl e a r

Type

MESSAGE

Change

Press the OK key to start entering the message.

Select with the cursor up/down the letter or number you want to enter.

Select with the cursor right the next position.

Press the OK key when you have entered the complete message.

Run

Clear

Press the OK key to remove a previous message.

Type

Press the cursor left/right to select the way the message will be

displayed: Wipe, Slide, Fall or Fade.

The Fade display is a randomly selection of the three other display

types.

Run

Press the cursor left/right to select the display frequency: Con tin uous,

On ce or No.

1-14 Use of th e m en us

Download from Www.Somanuals.com. All Manuals Search And Download.

Display message

Switch the TV to standby.

The message appears on the screen when the TV is switched on again.

If you selected On ce, the message will disappear from the screen after

about 45 seconds.

If you selected Con tin uous, the message will appear on the screen

until the Run menu item in the Message menu is switched to No or

until the receiver is powered off.

The message does NOT appear when Continuous subtitles have been

switched On. See p. 11.

Tim ers

Ac t ua l Ti me

Pr ogr a mme

St a r t Ti me

Ca nc e l Ti me r

With the Timers menu you can make your TV automatically switch to a

specific programme number from standby or switch over to a different

programme number at a specific time.

TI MERS

Actual time

If you have installed a TV channel which also broadcasts teletext on

programme number 1 or under the lowest favourite programme number

greater than 1, the time is downloaded from that TV channel. If this is

not the case you have to set the time manually with the digit keys. The

time, (entered manually) is updated every minute and remains until the TV

is switched off with the power off key in the “Power” control panel on the

remote control.

Note: If you entered an incorrect digit, complete the actual time with

arbitrary numbers, then start again. Use 24 hour, or military time.

Programme

Enter with the digit keys the programme number of the TV channel you

want your TV to switch over to. Use 24 hour, or military time.

Start time

Enter with the digit keys the start time of the selected TV programme

number you want your TV to switch over to.

Cancel timer

Select Can cel Tim er and press OK to reset the Start time to --:--

Keys in fron t of th e receiver box

Should your remote be lost or broken you can still browse through the

TV channels and externals or change some of the basic picture and

sound settings with the keys in front of the receiver box.

The PROGRAM - and + keys enable you to select the TV channels or

externals.

Note: If the message Child Lock ON appears, the child lock must be

switched off (with a remote control) before you can use the ^PROGRAM-

and + or the ^VOLUME- or + keys on the receiver. See p. 15.

Press the LOCAL MENU key behind the door at the front of the receiver

repeatedly to select Brigh tn ess, Colour or Con trast.

Press the VOLUME - or + key to adjust the chosen selection.

The selected adjustment automatically switches off when after 10 sec. no

action has been executed.

LO CAL PRO GRAM

MEN U

VO LUME

Im portan t: although “volume” is stated on the front panel it has no

influence on the sound level

Use of th e m en us 1-15

Download from Www.Somanuals.com. All Manuals Search And Download.

Dual screen

TV Text

Dual screen

Keypad

MUTE

& Press the b key to switch on Dual Screen.

The TV screen will be divided in 2 different pictures.

The picture on the left side is the selected TV channel or external.

The picture on the right side is the picture from the TV channel in the

favourite programme list following or preceding the selected TV

channel.

CHANNEL

Adjustments

Settings

VOLUME

P+

P-

Power

If the b key was selected before, the last selected right picture is

displayed again.

Dual screen

Switch to...

Cursor

Sub +

Sub -

é Press the q key to select a vertical squeezed or a non vertical

squeezed picture size.

Select left an d righ t pictures

& Press ch an n el +/ - to run through the favourite TV channels and

externals in the left picture.

é Press the dual screen P - or P + keys to select the favourite TV channels

or an external in the right picture.

Pressing the dual screen P - or P + keys for 3 seconds, starts auto scan

down or up of the TV channels and externals in the right picture.

Press again to stop the auto scan.

Remarks

• Programmes via a decoder/descrambler can only be displayed in the

left picture.

• Programmes in the subpicture via a peripheral (e.g. videorecorder)

can be heard via the headphone.

• VGA can not be displayed in Dual screen mode.

• On screen sound information of the left main picture appears in the

right upper corner.

Switch screen s

Press the c key to swap the right and left picture. The sound is

swapped as well.

Select still picture

Press the S key to freeze the programmes on the left and the right

picture.

Press the S key again to de-activate the still pictures. The screen

remains in dual screen mode.

Press the d key to freeze only the programme in the right picture.

If the screen was not in Dual Screen mode, the Dual Screen mode is

entered, and the displayed picture on the left is re-displayed on the right

side in a frozen way.

BBC 1

EXT 2

EXT2

BBC 2

EXT 2

BBC 1

EXT1

Press the d key again to de-activate the still picture. The screen

remains in dual screen mode.

Possible Dual Screen com bin ation s

TV channel/TV channel

See Select left and right pictures.

TV channel/Peripheral

See Select left and right pictures.

Peripheral/TV channel

See Select left and right pictures.

Peripheral/Peripheral

See Select left and right pictures.

1-16 Dual screen

Download from Www.Somanuals.com. All Manuals Search And Download.

Teletext

TV Text

Keypad

MUTE

Most TV channels broadcast information via teletext.

CHANNEL

Cursor

Each channel which broadcasts teletext transmits a page with

information on how to use its teletext system. Look for the teletext page

with the main index (usually p. 100).

Depending on the TV channel, teletext is transmitted in different

systems: WST, FLOF or TOP.

Adjustments

Settings

Power

VOLUME

The colours used in the options lines at the bottom right of the screen

correspond with the colour keys of your remote control.

TV Text

Switch to...

Dual screen

Sub +

Sub -

2/9

About Easy Text

Easy Text considerably reduces the waiting time (on condition that the

teletext broadcast of the particular TV channel is received for at least

half a minute) by :

•

a direct selection of previous and following pages which are in

transmission and of the pages referred to in the options lines

a habit watcher list: frequently used pages are put automatically in a

list of preferred pages, so that they are immediately available

the precapturing of the page numbers referred to in the displayed

page

the precapturing of all the subpages.

Switch Teletext on an d off

Press b to switch the teletext on or off.

The main index page appears on the screen.

Note: Dual Screen is disabled in Teletext mode.

Select a Teletext page

p 100

With th e digit keys

t x t

Enter the desired page number with the digit keys.

The page counter seeks the page or the page appears immediately when

the page number has been stored in the memory.

A message appears when you have entered a non existent or incorrect

page number. Page numbers beginning with 0 or 9 do not exist. Choose

another number.

News

Sports

Weather

TV-Guide

With th e option lin es

Select with the colour keys, corresponding to the coloured options at

the bottom right of the screen, the desired subject.

Quickly run th rough th e teletext pages

Press the cursor left/right or the ch an n el +/ - key to run through the

previous or the following pages.

Select th e previously selected txt page

Press the 0 key.

Teletext 1-17

Download from Www.Somanuals.com. All Manuals Search And Download.

MUTE

Select th e in dex teletext page

Press the k key to display the main index (usually p.100).

CHANNEL

On ly for T.O.P teletext broadcasts :

T.O.P orders the pages in categories and adds other possibilities of

enhancing ease of use.

VOLUME

Press i. A T.O.P. overview of the teletext subjects available is

displayed. Not all TV channels broadcast T.O.P. teletext. When the

teletext system is not T.O.P. teletext, a message appears at the top right

of the screen. In the “cursor” control panel select with the cursor

up/down, left/right the desired subject and press the OK key.

TV Text

Select subpages

Sub +

Sub -

3/9

When a selected teletext page consists of different subpages, one of the

subpages appears on the screen.

The coloured number in the vertical bar at the right of the screen refers

to the displayed subpage.

The other subpages can be selected in 3 ways :

With th e cursor up/ down

The other subpage numbers appear in white as soon as the transmission

has found them. They are stored in the memory so that they are

available while the teletext page is on screen. Select with the cursor

up/down the previous or the following subpage.

With th e left an d th e righ t button s

Select with the left button on the remote control for the following page

and press the right button for the previous page.

By addin g a subcode

Press U. Enter the desired subpage with the digit keys : e.g. 3 for the

third page of seven subpages.

The TV searches for the selected subpage.

Automatically rotating subpages:

Press U again to cancel the subcode.

Now the subpages rotate automatically.

Press U again. A vertical bar with the available subpages reappears

again. Select the subpages with the cursor up/down.

Special teletext fun ction s

In terrupt

Press e and the TV programme appears.

The display b indicates that you are still in the teletext mode.

You can select a page number.

Press e again to display the teletext page.

Mix

Press c to overlay the teletext page on the TV programme.

Press c again to display only the teletext page.

En large

Press h repeatedly to display the upper part, the lower part and then

to return to the normal page size.

Reveal

Press f to reveal/conceal the hidden information, such as solutions to

riddles and puzzles.

1-18 Teletext

Download from Www.Somanuals.com. All Manuals Search And Download.

Connect Peripheral Equipment

There is a wide range of audio and video equipment that can be

connected to your receiver. The following connection diagrams show

you how to connect them to the back or the front side of the receiver.

CONSTANT LEVEL OUT

Note: in case of the monitor in a stand alone situation without the

receiver box connected, see the instructions with the monitor.

Am plifier / receiver

Connect the audio cable to the amplifier or receiver and to

CONSTANT LEVEL OUT L and R at the back of your receiver box 1.

If you want to connect more equipment to your receiver, consult your

dealer.

Video recorder

Note: Do not place your video recorder too close to the screen as some

video recorders may be susceptible for signals out of the display. Keep a

minimum distance of 0.5 m to the screen.

CABLE

EXTERN AL

Connect the supplied aerial cables 1, 2 and, to obtain a better

picture quality, a eurocable 3 as shown opposite.

If your video recorder is provided with the EasyLink function, the

eurocable supplied with it, should be connected to EXTERNAL 2 to benefit

of the EasyLink function.

Only if you do not connect the eurocable 3, you have to do the

VCR 1

DECODER

following :

Search for an d store th e test sign al of th e video recorder

& Unplug the aerial cable 1 from the aerial socket x of your video

recorder.

é Switch on your TV and put the video recorder on the test signal.

(See the handbook for your video recorder.)

“ Search for the test signal of your video recorder in the same way as you

searched for and stored the TV signals. See Installation, Searching for

and storing TV channels, Manual Installation, p. 6.

‘ Store the test signal under programme number 0 or between 90 and 99.

( Replace the aerial cable in the aerial socket x of your video recorder

after you have stored the test signal.

Decoder an d video recorder

Connect a eurocable 4 to your decoder and to the special

euroconnector of your video recorder. See also the video recorder

handbook. See Define Decoder/Descrambler prog. numbers, p. 8.

You can also connect your decoder directly to EXTERNAL 1 or 2 with a

eurocable.

Con n ect Periph eral equipm en t 1-19

Download from Www.Somanuals.com. All Manuals Search And Download.

Video recorder an d oth er periph erals

& Connect the aerial cables 1, 2 and 3 as shown opposite. Better

picture quality can be obtained if you also connect eurocable 5 to

EXTERNAL 2 and a eurocable 4 to EXTERNAL 1 or 3.

EXTERN AL

CABLE

1 2

é Look for the test signal of your peripheral in the same way as you do for

a video recorder.

When a video recorder is connected to EXTERNAL 1 you can only record a

programme from your TV.

Only when a video recorder is connected to EXTERNAL 2 it is possible to

record a programme from your TV as well as from other connected

equipment. See Record with your video recorder, p. 26.

Note: EXTERNAL 1 can handle CVBS and RGB, EXTERNAL 2 CVBS, Y/C and

RGB, EXTERNAL 3 only CVBS.

VCR 1

Cam era & cam corder

& Connect your camera or camcorder at the front side of your receiver.

é Connect the equipment to VIDEO 2 and AUDIO L 1 for mono

equipment.

“ For stereo equipment also connect AUDIO R 1.

S-VHS quality with an S-VHS camcorder is obtained by connecting the

S-VHS cables with the S-VHS input 3 and AUDIO inputs 1.

Headph on e

Insert the plug into the headphone socket L at the front side of the

receiver.

The headphone impedance must be between 8 and 2000 Ohm.

The headphone socket has a 3.5 mm jack.

In the SOUND menu select Headph on e to adjust the headphone volume

and balance and to select the audio source for your headphone sound.

See p. 14.

1-20 Con n ect Periph eral equipm en t

Download from Www.Somanuals.com. All Manuals Search And Download.

Con n ect your com puter

& Connect one end of a VGA cable supplied to the video card of the

computer and the other end to the VGA MONITOR IN connector at the

rear side of the receiver box or at the VGA IN connector 1 at the back

of the monitor in case you have no receiver box connected to the

monitor.

See the instructions with the monitor.

é Fix the connectors firmly with the screws on the plug.

MAINS INLET

Con n ect your Apple Macin tosh * com puter

AUDIO IN

AUDIO OUT

VGA OUT

VGA IN

Attention: Macintosh computers with separate H and V synchronisation

signals can be used together with a switchable adaptor. Macintosh

computers with Composite Sync and Sync on Green signals may need

another special adaptor or cable. Contact your dealer.

& Connect a switchable adaptor for Apple video connectors to one end of

a VGA cable.

é Put the DIP switches on the adaptor in the following positions :

off

“ Connect the end of the VGA cable with the adaptor to the video card of

the computer and the other end to the VGA MONITOR IN connector on

the back of the receiver box or at the VGA IN connector on the back of

the monitor in case you have no receiver box connected.

‘ Screw the connectors down firmly.

15-pin D sub

(2-row)

15-pin mini D sub

(3-row)

To reproduce computer screen information and/or programmes,

see p. 25.

Note:The adaptor shown is not supplied with this set. Please contact your

dealer for more information.

Apple Macintosh is a registered trademark of Apple Computer, Inc.

Con n ect your com puter 1-21

Download from Www.Somanuals.com. All Manuals Search And Download.

Daisy ch ain in g

The Active Loop Through facility makes it possible to make a daisy

chain. Connect the monitors (max. 2) before in sertin g th e m ain s plug

in th e wall socket.

Connect another VGA cable to the VGA OUT connector 1 at the back of

the monitor and to the VGA IN connector of a second VGA monitor.

MAINS INLET

AUDIO IN

AUDIO OUT

VGA OUT

VGA IN

Computer Display modes

VGA

MAC II

SVGA

XGA

640x480

640x400

640x350

856x480

800x450

640x480

800x600

1024x768

31.468 kHz

31.490 kHz

35.000 kHz

35.156 kHz

37.880 kHz

45.000 kHz

48.360 kHz

60 Hz

70 Hz

60 Hz

65 Hz

67 Hz

56 Hz

60 Hz

56 Hz

60 Hz

When a VGA computer is connected, the selection is made

automatically.

A message is displayed when the monitor does not support one of the

above mentioned VGA modes.

Switch your computer to a correct display mode.

1-22 Con n ect your com puter

Download from Www.Somanuals.com. All Manuals Search And Download.

To select con n ected equipm en t

If the monitor is connected to a video recorder with the EasyLink

function, in some cases the monitor will be switched on, even when it

was in standby. (E.g. playback tape,...)

MUTE

CHANNEL

This is not possible when Child lock On is selected.

Equipm en t con n ected with an aerial cable on ly :

Select the programme number under which you have stored the test

signal with the digit keys.

VOLUME

Equipm en t con n ected to a eurocon n ector, to th e VGA MONITOR IN

con n ector or to th e fron t side of th e receiver box

Press the w key to select EXT1, EXT2, EXT3, FRONT or VGA, according

to where you connected your equipment at the back or the front side

of your receiver.

Keypad

Sub +

Sub -

1/9

Remark : Most equipment (decoder, video recorder) carries out the

switching itself.

If you wan t to ch an ge to TV ch an n els?

Enter the programme number of the TV channel which you want to

watch with the digit keys.

MUTE

VGA m en u

CHANNEL

& Press the w key in the “keypad” control panel and select VGA.

VOLUME

é Select in the control menu “cursor”

VGA

“ Press the red (picture menu), green (sound menu) or yellow (features

menu) key on the door of the remote control to switch on the VGA

Front

Scan

(or press the MENU key on the simplified remote control).

Go back

‘ Select one of the PC symbols with the cursor up/down:

Sub +

Sub -

8/9

for contrast,

for brightness,

for colour temperature,

for horizontal picture position,

for vertical picture position,

( Press the cursor left/right to alter the selected adjustment.

§ Press one of the coloured keys again (or the MENU key on the simplified

remote control) to switch off the VGA menu.

Con n ect periph eral equipm en t 1-23

Download from Www.Somanuals.com. All Manuals Search And Download.

Record with your video recorder

Ext2 Output

To record S-VHS quality, connect an S-VHS peripheral directly to the

video recorder.

In this case go on as follows:

& Select Setup in the INSTALLATION menu and press the OK key

(“settings” control panel on the remote control).

é Select Ext 2 Output with the cursor up/down (“cursor” control panel on

the remote control).

“ Select S-VHS Quality with the cursor left/right.

In all other cases, whether you record with a VHS or a S-VHS video

recorder, select VHS Quality.

‘ Press one of the colour menu keys in the “cursor” controle panel on the

remote control repeatedly to switch the menu off.

Record a TV program m e

& Select the programme number on your video recorder.

é Set your video recorder to record.

See the handbook for your video recorder.

Switching programme numbers on your TV does not disturb recording !

Record a program m e on your video recorder con n ected to

EXTERNAL 2 from Audio/ Video equipm en t con n ected to

EXTERNAL 1, EXTERNAL 3 or to sockets on th e fron t side of th e

receiver

& Switch on the equipment.

é Select the correct external on your video recorder.

“ Set your video recorder to record.

You record what you are watching on the screen.

Do not switch programme numbers or do not switch off your TV when

you are recording !

1-24 Recordin g

Download from Www.Somanuals.com. All Manuals Search And Download.

Tips

Poor Picture

• In case of weak or bad signal, consult

your dealer.

En d of life directives

We are paying a lot of attention to using

environmentally-friendly production

• Have you selected the correct TV system?

• Is your monitor or house aerial located

too close to loudspeakers, non-earthed

audio equipment or neon lights, etc. ?

• Mountains or high buildings can cause

double pictures or ghost images.

Sometimes you can improve the picture

quality by changing the direction of the

outside aerial.

• Check if you have entered the correct

frequency. See Installation, p. 6.

• Are brightness and contrast out of

adjustment ? Adjust the picture settings,

see p. 13.

Con trol of periph eral equipm en t

The infrared signals of the screen may

influence the reception sensibility of other

peripherals. Solution: replace the batteries

of the remote control or change position of

other equipment. E.g. keep away a wireless

headphone from within a radius of 1.5 m.

methods. Your new flat colour television

contains materials which can be recycled

and reused. At the end of life specialised

companies can dismantle the discarded

flat colour television to concentrate the

reusable materials and to minimise the

amount of materials to be disposed of.

Please ensure you dispose of your old

flat colour television according to local

regulations.

Rem ote con trol

• If your monitor no longer responds to

the remote control, the batteries may be

exhausted.

• Sometimes poor picture quality is

possible when having activated a S-VHS

camera or camcorder connected to the

front side of your receiver and another

peripheral is connected to EXT1 or

EXT2 at the same time. In this case

switch off one of the other peripherals.

• You can still use the keys at the front

of your receiver.

Miscellan eous

. Ambient temperature: + 5~ + 45°C

. Maximum operating altitude: 2000 m

. Mains: AC 100-240V

. Power consumption: around 350W

. Standby consumption: 2 W

. Weight (excl. packaging)

Display: 47.5 kg

Men u

Have you selected the wrong menu ?

Press the same key again to exit from the

menu.

No picture

No stable or n ot syn ch ron ised VGA

picture

Check if you have selected the correct

VGA mode in your PC (640x480, 640x400,

640x350, 856x480, 800x450, MAC II,

SVGA, XGA).

Receiver: 6.4 kg

. Dimensions (wxhxd):

Display: 107 x 67 x 14.6 cm

Receiver: 43.5 x 16.7 x 33.8 cm

. Wall mounting bracket included

. Flour stand optional

• Are the supplied cables connected

properly? (The aerial cable to the

monitor, the other aerial to your VCR,

the VGA cables to the display, the

power cables.)

• Has the child lock (p. 15) been

switched off ?

• Is your PC switched on?

• Do you see a black screen and the

indicator in front of the monitor lights

up green, this means that the display

mode is not supported. Switch your

VGA-source to a correct mode.

If your problem is n ot solved:

Switch both your monitor and your

receiver off and then on again.

Never attem pt to repair a defective

m on itor or receiver yourself.

Check with your dealer or call a TV

technician.

In dex

auto format,

automatic installation,

ACI,

favourite programmes,

freeze, 10

reshuffle,

search for TV channels,

select your computer, 24

setup,

frequency,

give name,

audio 19

bilingual broadcast,

camcorder, 20

child lock, 14

clock, 11

headphone, 20

headphone PP store 12

info on screen, 10

sleeptimer, 14

smart controls, 10

sound mode, 12

store TV channels,

information line,

language,

colour temperature, 12

computer, 21

subpages teletext, 18

subtitles, 11

m manual installation,

country,

menu language,

S-VHS, 24

daisy chaining, 22

decoder/descrambler,

message, 14

switch TV on,

teletext, 17

timers, 15

tint, 12

VGA, 23

video recorder, 19

peripheral equipment, 19

permanent programme number,

picture adjustments, 12

picture format, 10

picture mute,

programme list, 10

digital,

DNR, 10

dual screen, 16

dynamic contrast, 12

easy text, 17

eurocable, 19

recording, 24

Tips & In dex 1-25

Download from Www.Somanuals.com. All Manuals Search And Download.

Glossary

100 Hz

Digital Video

NTSC

100 Hertz provides a superior solution

to the problem of picture flicker which

is particularly noticeable with larger

screen sizes.

Description applied to any equipment

that uses digital techniques to

reproduce pictures.

The broadcasting system used in the

USA, Japan and parts of South America

and Southeast-Asia.

DNR

In a conventional TV, the picture area

is scanned 50 times a second (50 Hertz)

– a frequency which is still detectable

by the human eye in the form of a

flickering picture. In 100 Hertz sets, the

picture area is scanned at a rate of 100

times per second (100 Hertz). At this

frequency, the eye cannot detect flicker,

resulting in a clearer picture which is

more relaxing to the eye.

Dynamic Noise Reduction.

By encoding signals digitally in 100 Hz

sets with Digital Scan it is possible to

clean up picture noise. This is

especially beneficial in poor signal

areas and when viewing poor quality

video tapes.

Picture Freeze

TV mode which allows you to “freeze”

a certain image in order to study a

specific detail at ease, e.g. to make

notes of certain programme information

like phone numbers.

Sleeptimer

Easy Lin k

Function with which you can set a time

period after which the TV should

switch itself to standby.

Digital ‘intelligent’ ESI bus-system

between audio components in HiFi

systems and between TV and VCR.

(Scart connection required). Turns

source selection and control into a

one-button operation.

Automatic Channel Installation (ACI)

Automatically installs all TV channels in

the same order as offered by your

cable company, provided of course that

the data is transmitted. It also

automatically includes programme

number and programme name.

With ACI, channel installation is fully

automatic, simple and fast.

Teletext