Model DV4400 User Guide
DVD Player
CLASS 1
LASER PRODUCT
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
READ BEFORE OPERATING EQUIPMENT
17. Power Lines – An outside antenna system should not be located in the vicinity
of overhead power lines or other electric light or power circuits, or where it
can fall into such power lines or circuits. When installing an outside antenna
system, extreme care should be taken to keep from touching such power lines
or circuits as contact with them might be fatal.
18. Overloading – Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or electric shock.
19. Object and Liquid Entry – Never push objects of any kind into this product
through openings as they may touch dangerous voltage points or short-out
parts that could result in a fire or electric shock.
This product was designed and manufactured to meet strict quality and
safety standards. There are, however, some installation and operation
precautions which you should be particularly aware of.
1. Read Instructions – All the safety and operating instructions should be read
before the product is operated.
2. Retain Instructions – The safety and operating instructions should be retained
for future reference.
3. Heed Warnings – All warnings on the product and in the operating instructions
should be adhered to.
4. Follow Instructions – All operating and use instructions should be followed.
Never spill liquid of any kind on the product.
5. Cleaning – Unplug this product from the wall outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
20. Servicing – Do not attempt to service this product yourself as opening
or removing covers may expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
21. Damage Requiring Service – Unplug this product from the wall outlet and
refer servicing to qualified service personnel under the following conditions:
a. When the power-supply cord or plug is damaged.
6. Attachments – Do not use attachments not recommended by the product
manufacturer as they may cause hazards.
7. Water and Moisture – Do not u se this product near water-for example, near
a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near
a swimming pool, and the like.
8. Accessories – Do not place this product on an unstable cart, stand, tripod,
bracket, or table. The product may fall, causing serious injury to a child or
adult, and serious damage to the product. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer, or sold with the product.
Any mounting of the product should follow the manufacturer’s instructions,
and should use a mounting accessory recommended by the manufacturer.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as
an improper adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore the product to its
normal operation.
e. If the product has been dropped or damaged in any way, and
9. CART – A product and cart combination should be
moved with care. Quick stops, excessive force, and
f.
When the product exhibits a distinct change in performance – this indicates
a need for service.
uneven surfaces may cause the product and cart
22. Replacement Parts - When replacement parts are required, be sure the
service technician has used replacement parts specified by the manufacturer
or have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
23. Safety Check – Upon completion of any service or repairs to this product,
ask the service technician to perform safety checks to determine that the
product is in proper operating condition.
combination to overturn.
10. Ventilation – Slots and openings in the cabinet are
provided for ventilation and to ensure reliable
operation of the product and toprotect it from overheating,
andthese openings must not beblocked or covered. The openings should never
be blocked byplacing the product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in installation such asa bookcase
or rack unless proper ventilation is provided or themanufacturer’s instructions
have been adhered to.
24. Wall or Ceiling Mounting – The product should be mounted to a wall or
ceiling only as recommended by the manufacturer.
11. Power Sources – This product should be operated only from the type of power
source indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your product dealer or local power company. For
products intended to operate from battery power, or other sources, refer to the
operating instructions.
25. Heat – The product should be situated away from heat sources such as
radiators, heat registers, stoves, or other products (including amplifiers)
that produce heat.
12. Grounding or Polarization – This
product may be equipped with a
polarized alternating-current line
FIGURE 1
AC POLARIZED PLUG
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE, ANSI/NFPA 70
plug (a plug having one blade
wider than the other). This plug will fit into the power outlet only one way. This
is a safety feature. If you are unable to insert theplug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the safety purpose of the polarized
plug.
ANTENNA
LEAD IN
WIRE
13. Power-Cord Protection – Power-supply cords should be routed so that they are
not likely to be walked on or pinched by items placed upon or against them,
paying particular attention to cords at plugs, convenience receptacles, and the
point where they exit from the product.
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
Protective Attachment Plug – The product is equipped with an attachment plug
having overload protection. This is a safety feature. See Instruction Manual for
replacement or resetting of protective device. If replacement of the plug is
required, be sure the service technician has used a replacement plug specified by
the manufacturer that has the same overload protection as the original plug.
14.
ELECTRIC
SERVICE
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
EQUIPMENT
GROUND CLAMPS
POWER SERVICE GROUNDING
Outdoor Antenna Grounding – If an outside antenna or cable system is connected
to the product, be sure the antenna or cable systemm is grounded so as to provide
some protection against voltage surges and built-up static charges. Article 810 of
the National Electrical Code, ANSI/NFPA 70, provides information with regard to
proper grounding of the mast and supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of grounding conductors, location of
antenna-discharge unit, connection to grounding electrodes, and requirements
for the grounding electrode. See Figure 1.
15.
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC - NATIONAL ELECTRICAL CODE
16. Power-Cord Protection – Power-supply cords should be routed so that they are
not likely to be walked on or pinched by items placed upon or against them,
paying particular attention to cords at plugs, convenience receptacles, and the
point where they exit from the product.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la Classe B est conforme à la norme
NMB-003 du Canada.
EN
–
–
3
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
■
■
■
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Laser Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . 3
DVD SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Language Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Display Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Audio Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Parental Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
PARENTAL LEVEL. . . . . . . . . . . . . . . . . . . . . . . . . . 24
IF YOU FORGET THE PASSWORD . . . . . . . . . . . . . 24
CONTROL LEVELS. . . . . . . . . . . . . . . . . . . . . . . . . 24
INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
About Copyright. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Symbols Used in this Manual. . . . . . . . . . . . . . . . . . . . . 5
■
ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Playable Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Disc Types. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
■
■
■
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
TROUBLESHOOTING GUIDE. . . . . . . . . . . . . . . . . . . 26
SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
■
■
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . 8
FRONT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . 8
Tour of the remote control . . . . . . . . . . . . . . . . . . . . . . . 9
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Displays During Operation . . . . . . . . . . . . . . . . . . . . . . 11
Using the remote control . . . . . . . . . . . . . . . . . . . . . . . 11
Loading the Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . 11
■
■
HOOK UPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Description - rear panel . . . . . . . . . . . . . . . . . . . . . . . . 12
Connection to an audio system . . . . . . . . . . . . . . . . . . 13
Connection to a TV (for video) . . . . . . . . . . . . . . . . . . . 14
PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Basic Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
CANCELLING AND CALLING BACK
PBC FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
General Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
FL OFF Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Disc Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
CALLING UP A MENU SCREEN DURING
PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Step by Step Playback. . . . . . . . . . . . . . . . . . . . . . . . . 16
Resume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Fast Forward / Reverse Search . . . . . . . . . . . . . . . . . . 16
Slow Forward / Slow Reverse . . . . . . . . . . . . . . . . . . . 16
Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Title / Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . 17
Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
REPEAT TITLE / CHAPTER. . . . . . . . . . . . . . . . . . . 17
REPEAT TRACK . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
A-B REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Program (CD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Random Playback (CD) . . . . . . . . . . . . . . . . . . . . . . . . 18
MP3 / JPEG / WMA Playback . . . . . . . . . . . . . . . . . . . 18
Slide Show Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
On-Screen Information. . . . . . . . . . . . . . . . . . . . . . . . . 20
Track Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Random Playback (MP3/JPEG/WMA) . . . . . . . . . . . . . 20
Program (MP3/JPEG/WMA). . . . . . . . . . . . . . . . . . . . . 20
Audio Language or Sound Mode . . . . . . . . . . . . . . . . . 21
Stereo Sound Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Subtitle Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Camera Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Changing the On-Screen Display . . . . . . . . . . . . . . . . . 22
Marker Setup Screen. . . . . . . . . . . . . . . . . . . . . . . . . . 22
Black Level Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Virtual Surround . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
EN
–
–
4
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
The serial number of this product may be found on the back of the DVD player. No others have the
same serial number as yours. You should record the number and other vital information here and
retain this book as a permanent record of your purchase to aid identification in case of theft. Serial
numbers are not kept on file.
Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
About Copyright
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.
This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineer-
ing or disassembly is prohibited.
Apparatus Claimas of U. S. Patent Nos, 4,631,603, 4,577,216, 4,819,098, and 4,907,093 licensed for limited
viewing uses only.
Supplied Accessories
Please check to make sure the following items are included with the main unit in the carton.
Remote
• • • • • • • •
control
Operating
Instruction
Warranty Card
Audio
• • • • • • • • •
cable
Video
• • • • • • • • •
cable
“AA” (R6P)
• • • • • •
batteries
• • • •
• • • • • •
1
1
for USA
Warranty Card
• • •
1
1
1
2
for Canada
1
Symbols Used in this Manual
The following symbols appear below in some headings and notes in this manual, with the following meanings.
:
Description refers to playback of DVD-Video discs.
Description refers to playback of Audio CDs.
DVD-V
CD
:
:
:
:
:
Description refers to playback of discs formatted with MP3.
Description refers to playback of Video CDs.
MP3
VCD
JPEG
WMA
Description refers to viewing of JPEG discs.
Description refers to playback of discs formatted with WMA.
Description refers to the items to be set in the QUICK mode.
:
QUICK
EN
–
–
5
Download from Www.Somanuals.com. All Manuals Search And Download.
ABOUT THE DISCS
Playable Discs
The following discs can be played back on this
DVD player.
Disc Types
]
[
DVD-Video
Data on a DVD is divided into sections called "titles," and
then into subsections called "chapters," each of which is
given a title or chapter number. Playback conditions are
preset on some DVD-Video discs, and these playback
conditions take priority over user operations on this player.
If a function you selected does not run as desired, refer to
Usable
discs
Recorded
signals
Mark (logo)
Disc Size
DVD-Video
(NOTE 1)
12 cm
the manual accompanying the disc
.
Digital video
(MPEG2)
Example
Title 1
Title 2
DVD-R
DVD-RW
(NOTE 2)
8 cm
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2
Digital audio
MP3
WMA (NOTE 4)
Digital picture
(JPEG)
12 cm
CD
CD-R
CD-RW
(NOTE 3)
8 cm
[
]
Audio CD, Video CD
Data on an Audio CD, or a Video CD is divided into sections
called “tracks,” each of which is given a track number.
12 cm
Sound
and
Pictures
Video
CD
DIGITAL VIDEO
Example
8 cm
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
(Singles)
Picture CD
JPEG
12 cm
ABOUT THE PBC FUNCTION OF VIDEO CD
This unit conforms to ver.1.1 and ver.2.0 of Video CD stan-
dard, with PBC function.
Ver.1.1 (without PBC function): You can enjoy playback picture
as well as music CD.
Ver.2.0 (with PBC function): While using a Video CD with PBC
function, “PBC” appears on the screen and the display.
NOTE 1: Some DVD-Video discs do not operate as described in this
manual due to the intentions of the discs’ producers.
NOTE 2: Playing DVD-R and DVD-RW discs
DVD-R and DVD-RW discs on a DVD recorder can be played.
Discs that have not be finalized cannot be played.
Depending on the disc’s recording status, the disc may not be
accepted or may not be played normally (the picture or sound
may be not be smooth, etc.).
NOTE 3: Some of CD-R/CD-RW discs may be incompartible because
of “scratch and stain of disc”, “Recording condition”, and
“Characteristic of Recorder”.
What is PBC? “PBC” stands for the Playback Control.You
can play interactive software using menu screens. Refer to
instructions in the Video CD.
NOTE 4:
Windows Media and the Windows logo are
trademarks or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
NOTE:
When playing Video CDs with PBC function, some operations
(e.g., select and repeat tracks) cannot be performed unless the
function is cancelled temporarily (refer to page 15).
This player conforms to the NTSC color system. You
cannot play discs recorded in other color systems such
as PAL.
[
]
MP3, JPEG, WMA
Data on a MP3 is divided into sections called "groups," and
then into subsections called "tracks," each of which is given an
album or track number.
¡Some discs include region codes as shown below.
Example
Group 1
Group 2
Track 1
Track 2
Track 3
Track 4
Track 1
Track 2
¡The number inside the symbol refers to a region of
the world, and a disc encoded in a specific region for-
mat can only be played back on DVD players with the
same region code.
The following discs cannot be played back on this
DVD player.
CAUTION:
¡DVD with region codes other than 1 or ALL.
¡DVD-ROM
¡
Use caution not to pinch your finger in the disc slot.
¡Be sure to remove a disc and unplug the AC power cord
¡DVD-RAM (Never play back, otherwise malfunc-
tion may result.)
from the outlet before carrying the DVD player.
¡CD-ROM
¡VSD
¡CDV (Only plays back the audio part.)
¡CD-G (Only plays back the sound.)
¡CD-R/CD-RW (Only plays back the discs which
Audio CD/MP3/JPEG/WMA is recorded.)
¡CD-I (Never play back, otherwise malfunction may
result.)
¡Photo CD (Never play back, otherwise malfunc-
tion may result.)
¡Super Audio CD
¡DVD-Audio
Any other discs without compatibility indications.
EN
–
–
6
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
¡Dolby Digital Sound
¡Search
By hooking this player up to a Multi-Channel Dolby
Digital decoder, you can enjoy high-quality 5.1ch
Dolby Digital surround sound as heard in the movie
theaters.
Group search: Search for the group designated by
user is possible.
Chapter search:Search for the chapter designated by
user is possible.
Title search: Search for the title designated by user
is possible.
¡DTS(Digital Theater System)
When this player is connected to the DTS decorder,
you can enjoy 5.1 channel surround system which
reproduces the original sound as trutyfully as possi-
ble. 5.1 channel surround system is developed by the
Digital Theater System, Inc.
Track search: Search for the track designated by
user is possible.
Time search: Search for the time designated by
user is possible.
¡Repeat
Chapter:
¡Progressive Scan system
Repeated playback of the chapter of
the disc being played is possible.
Repeated playback of the title of the
disc being played is possible.
Repeated playback of the track of the
disc being played is possible.
Repeated playback is possible.
(exclude DVD-Video)
The part between A and B designated
by user is possible.
Repeated playback of the folder of
the MP3/JPEG/WMA disc being
played is possible.
Unlike conventional interlace scanning, the progres-
sive scan system provides less flickering and images
in higher resolution than that of traditional television
signals.
Title:
Track:
ALL:
¡Still/fast/slow/step playback
Various playback modes are available including still
pictures, fast forward/reverse, slow motion and step
frames.
A-B:
¡Random playback for Audio CD, MP3, JPEG, and
WMA
This player can shuffle the order of tracks to play
them in random order.
Group:
¡Program playback for Audio CD, MP3, JPEG, and
WMA
¡Zoom
You can program the order of tracks to play them in
any desired order.
2-time or 4-time magnified screen can be displayed.
¡Marker
¡DVD menus in a desired language
You can display DVD menus in a desired language, if
available on a DVD.
¡Auto standby
When the screen saver program is activated for 35
minutes, the power is automatically turned off.
¡Subtitles in a desired language
You can select a desired language for the display
subtitles, if that language is available on a disc.
¡Selecting a camera angle
You can select the desired camera angle, if a disc
contains sequences recorded from different angles.
¡Choices for audio language and sound mode
You can select the desired audio language and
sound mode, if different languages and modes are
available on a disc.
¡Parental lock
You can set the control level to limit playback of discs
which may not be suitable for children.
The part designated by user can be called back.
¡Resume Play
User can resume to playback from the part at which
the play was stopped even if the power turn off.
¡Component Video Out Jacks
Jacks located on the back of the DVD Player which
are used to send high-quality video to a TV via
Component Video In Jacks.
¡Bit rate indication
¡DRC (Dynamic range control)
You can control the range of sound volume.
¡Displaying a JPEG picture
Kodak Picture CDs can be played. Still images stored
in JPEG format on CD-R/RW can also be played.
¡Reproducing WMA data
You can enjoy WMA files which are recorded on
CD-R/RW.
¡Automatic detection of discs
This player automatically detects if a loaded disc is
DVD-Video, Audio CD, MP3, JPEG, or WMA.
¡Playing an MP3 disc
You can enjoy MP3 files which are recorded on CD-
R/RW.
¡Direct Search
You can search the desired title, chapter, and track
with numeric button during playback or in stop mode.
¡On-screen display
Information about the current operation can be dis-
played on a TV screen, allowing you to confirm the
currently active functions (such as program play-
back), on the TV screen using the remote control.
“Kodak Picture CD COMPATIBLE” is trademark of
Eastman Kodak Company.
¡FL OFF Mode
You can turn off the display.
“WMA” (Windows Media Audio) is a new audio
codec developed by Microsoft® in the United
States of America.
EN
–
–
7
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
FRONT PANEL
3
1
2
5
6 7
4
/
11
13
14
31
30
10 8
12
REMOTE CONTROL
1. POWER Button [page 15]
2. Disc loading tray
3. PLAY Button [page 15]
4. STOP Button [page 15]
5. PAUSE Button [page 15]
6. Cursor Buttons [page 15]
Use when making settings while watching the display on
a TV screen.
7. MENU Button [page 15]
21
26
12
1
27
24
19
16
15
8. ENTER Button [page 15]
9. SETUP Button [page 23]
28
10
10. G (SKIP UP/FWD) Button [page 17]
Plays back from the beginning of the next chapter or
track. Hold down to fast forward playback.
11. H (SKIP DOWN/REV) Button [page 17]
Plays back from the beginning of the current chapter or
track. Hold down to fast reverse playback.
12. OPEN/CLOSE Button [page 15]
13. FL OFF Button [page 15]
18
5
22
3
11
23
4
14. Display, Remote Sensor Window
15. A-B REPEAT Button [page 18]
16. REPEAT Button [page 17]
7
9
29
6
17. ZOOM Button [page 16]
18. CLEAR Button [page 17]
19. ANGLE Button [page 21]
Press to change the camera angle to see the sequence
being played back from a different angle.
20. RETURN Button [page 15]
17
25
20
8
21. SEARCH MODE Button [page 17]
22. h (FR SEARCH) Button [page 16]
23. g (FF SEARCH) Button [page 16]
24. SUBTITLE Button [page 21]
Press to select a desired subtitle language.
25. TOP MENU Button [page 15]
26. DISPLAY Button [page 20]
27. AUDIO Button [page 21]
Press to select a desired audio language or sound mode.
28. Numeric Buttons [page 17]
29. MODE Button [page 18]
30. FL OFF Indicator
The buttons with circled numbers can only be
operated with the remote control.
This indicator lights when the FL OFF button is ON.
31. STANDBY Indicator
This indicator lights when the DVD player turns off.
EN
–
–
8
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Tour of the remote control
Buttons on remote control work in different ways for DVD, VCD, and CD :
Refer to the following table for correct use.
DVD
VCD
CD
POWER
• Press this to switch the power • Press this to switch the power • Press this to switch the power
between on and standby.
between on and standby.
between on and standby.
A-B REPEAT Button
REPEAT Button
•
Marks a segment to repeat
between A and B.
• Marks a segment to repeat
between A and B.
• Marks a segment to repeat
between A and B.
• Allows you to repeat play a
• Allows you to repeat play a
• Allows you to repeat play a
Title, or Chapter.
Track or Disc.
Track or Disc.
•
•
To set black level on/off.
To activate the 3D sound (Virtual
surround system).
• To set black level on/off.
•
•
Allows you to program a specific order
or random playback.
To activate the 3D sound
(virtual surround system).
MODE Button
•
To activate the 3D sound
(virtual surround system).
ZOOM Button
ANGLE Button
• To magnify part of picture
(x2).
• To magnify part of picture
(x2/x4).
•
Accesses various camera angles
on a disc.
SUBTITLE Button
AUDIO Button
• Accesses various subtitles on
a disc.
•
To select STEREO, L-CH or R-CH.
•
Accesses various audio functions
on a disc.
•
•
To select STEREO, L-CH or R-CH.
Displays the current disc mode.
DISPLAY Button
• Displays the current disc
mode.
• Displays the current disc mode.
SEARCH MODE Button
• To search track or time.
• To rapidly return to a location
of disc.
• To search chapter, title, or time.
• To rapidly return to a location
of disc.
• To search track or time.
• To rapidly return to a location
of disc.
OPEN/CLOSE Button
NUMERIC Buttons
• To open or close the disc tray.
• To open or close the disc tray.
• To open or close the disc tray.
• To select track directly.
• To select chapter directly.
• To select track directly.
CLEAR Button
• Clear the markers.
• Removes status No. in
program input.
• Clear the markers.
• Clear the markers.
EN
–
–
9
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Tour of the remote control
DVD
• Brings up the Menu on a disc.
VCD
CD
MENU Button
TOP MENU Button
•
Brings up the Top Menu on a disc.
ENTER, CURSOR Buttons
•
Moves the cursor and determines
its position.
•
Moves the cursor and determines
its position.
•
Moves the cursor and determines
its position.
RETURN Button
• Returns to a previous menu.
• Returns to a previous menu.
SETUP Button
SKIP Buttons
•
Brings up the DVD player's Setup menu.
•
Brings up the DVD player's Setup menu.
•
Brings up the DVD player's Setup menu.
• To skip Chapters
• To skip Tracks.
• To skip Tracks.
SEARCH Buttons
• Allows you to search forward/backward
through a disc (x2. x8. x30).
•
Allows you to search forward/backward
through a disc (x2. x8. x50. x100).
•
Allows you to search forward/backward
through a disc (x16).
STOP Button
PLAY Button
PAUSE Button
• To stop playback.
• To stop playback.
• To stop playback.
• Begin disc play.
• Pause disc play.
• Begin disc play.
• Begin disc play.
•
•
Pause disc play.
Advances playback one frame at a time.
•
•
Pause disc play.
Advances playback one frame at a time.
EN
–
–
10
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Display
Stays on when repeat chapter function is on.
Stays on when repeat track function is on.
Stays on when repeat
title function is on.
Stays on when
the repeat function is on.
Lights up when a DVD is
inserted into the tray.
Stays on when
the A-B repeat
function is on.
CD:
Lights up when a CD is inserted
into the tray.
VCD:
Lights up when a Video CD is
inserted into the tray.
Stays on when the inserted
disc is being played back.
Lights up when a
playback control
is activated.
Lights up when the
inserted disc comes
to a pause.
Displays how long a current title or track has been
played back. When a chapter or track has switched,
the number of a new title, chapter or track is displayed.
Displays During Operation
Power on
Loading the Batteries
1. Open the battery compartment cover.
No disc inserted
Tray open
2. Insert two “AA” (R6P) batteries, with each
one oriented correctly.
Tray closed
3. Close the cover.
Loading the Disc
Power off
NOTES
• Do not mix alkaline and manganese batteries.
• Do not mix old and new batteries.
Using the remote control
Cautions On Batteries
• Use “AA” (R6P) batteries in this remote control unit.
• Replace the batteries with new ones approximately
once a year, though this depends on the frequency
with which the remote control unit is used.
• If the remote control unit does not operate from
close to the main unit, replace the batteries with
new ones, even if less then a year has passed.
• The included battery is only for verifying operation.
Replace it with a new battery as soon as possible.
• When inserting the batteries, be careful to do so in
Keep in mind the following when using the remote
control:
• Make sure that there is no obstacle between the
remote and the remote sensor on the unit.
• Use within the operating range and angle, as shown.
/
the proper direction, following the
and
marks
in the remote control unit’s battery compartment.
• To prevent damage or battery fluid leakage:
• Do not use a new battery with an old one.
• Do not use two different types of batteries.
• Do not short-circuit, disassemble, heat or dispose
of batteries in flames.
• Remove the batteries when not planning to use the
remote control unit for a long period of time.
• If the batteries should leak, carefully wipe off the
fluid from the inside of the battery compartment,
then insert new batteries.
EN
–
–
11
Download from Www.Somanuals.com. All Manuals Search And Download.
HOOK UPS
Description - rear panel
2
1
3
4
5
6
1. DIGITAL OUT JACKS
Use either an optical or coaxial digital cable to connect to an AV amplifier with a built-in decoder (AV control center).
2. 2ch AUDIO OUT JACKS
Connect to the Audio input jacks of A/V-compatible TV or wide screen TV, Stereo system.
3. VIDEO OUT JACK
Use a video cable to connect one of the jack to Video input on your A/V-compatible TV or wide screen TV, Stereo system.
4. COMPONENT VIDEO OUT JACKS
B
B
R
R
Use these jacks if you have a TV with Component Video in jacks. These jacks provide C /P , C /P and Y video. Along
with S-Video, Component Video provides the best picture quality.
5. S-VIDEO OUT JACK
Use the S-Video cable to connect this jack to the S-Video jack on your A/V-compatible TV or wide screen TV for a higher
quality picture.
6. PROGRESSIVE switch
Selecting Progressive Scan (480p or Interlaced 480i) Playback
¡If your TV is compatible with progressive scanning (480p), connect the TV to the Component Video Output jacks of the DVD
player and set the Progressive switch on the back of the DVD player to “PROGRESSIVE”. Next, set your TV to the progres-
sive scan mode.
If your TV is not compatible with progressive scan, keep the Progressive switch to “INTERLACE”.
¡Use a commercially available adaptor if the video input jacks of your TVs or monitors are the BNC type.
What is Progressive Scanning?
¡Unlike conventional interlace scanning, the progressive scan system provides less flickering and images in higher resolution
than that of traditional (480i) television signals.
NOTE
• When the Progressive switch is set to "PROGRESSIVE", no video signal will be output from the VIDEO OUT or S-VIDEO
OUT jack.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks
of Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
EN
–
–
12
Download from Www.Somanuals.com. All Manuals Search And Download.
HOOK UPS
The following show examples of connections commonly used to connect the DVD player either TV and other
components.
If using this DVD player to playback a DVD in a 5.1 channel Dolby Digital surround or DTS surround format, the
DVD player outputs a Dolby Digital or DTS data stream from its OPTICAL or COAXIAL DIGITAL AUDIO OUT
jacks. By hooking the player up to a Dolby Digital or DTS decoder, you can enjoy a more convincing, realistic
ambience with powerful and high-quality surround sound of a professional standard, which can be heard in
movie theaters. Use an audio coaxial or optical digital cable (not included) for the audio connections. Use audio
cables (commercially available ) for the 5.1 CH audio connection.
Notes
¡Be sure to turn off the power to all components in the system before connecting another component.
¡Refer to the Instruction Manuals for your TV, stereo system and any other components to be connected to the
DVD player.
Connection to an audio system
Method 1
Method 2
Dolby Digital decoder
or
Stereo system
DTS decoder
Digital Audio Input
Jacks
Audio Input Jacks
AUDIO
Analog Audio Out
Digital Audio Out
DVD
• Method 1 DVD Player + Stereo system
• Method 2 DVD Player + Dolby Digital decoder or DTS decoder
NOTES
• If output Dolby Digital audio, connect to a Dolby Digital decoder, and set Dolby Digital to ON for audio output in the setup
mode. (See page 24)
• If output DTS audio, connect to a DTS decoder, and set DTS to “ON” for audio output in the setup mode. (See page 24)
•
Unless connected to a Dolby Digital decoder or a DTS decoder, set Dolby Digital or DTS to “OFF” for audio output in the setup
mode. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers. (See page 24)
• The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or
DAT deck.
•
Set Dolby Digital and DTS to “OFF” for audio output in the setup mode for method 1 only. Playing a DVD using incorrect set-
tings may generate noise distortion, and may also damage the speakers. (Refer to page 24 to set “ON” Dolby Digital and DTS)
Optical cable (not supplied)
• Optical cable (not supplied) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with a diame-
ter of 15 cm or more when storing them.
• Use a cable which is 3m or shorter.
• Insert cable plugs firmly into the connectors when making connections.
• If a plug has minor scratches or is dirty, clean it with a soft cloth before inserting it into a connector.
EN
–
–
13
Download from Www.Somanuals.com. All Manuals Search And Download.
HOOK UPS
Connection to a TV (for video)
Method 1
Method 2
Method 3
Basic Audio
Good picture
Better picture
Best picture
COMPONENT
VIDEO IN
R
L
VIDEO IN
S-VIDEO IN
CR
Y
CB
TV
PR
Y
PB
Audio cable
Video cable
S-Video
cable
Component Video
Cable
DVD
Analog Audio out
Video out
S-Video out
Component Video out
• Method 1 DVD Player + TV with Video Input Jack
• Method 2 DVD Player + TV with S-Video Input Jack
• Method 3 DVD Player + TV with Component Video Jacks
NOTES
• If your TV is compatible with progressive scanning (480p), connect the TV to the Component Video Output jacks of the DVD
player. Refer to page 12.
• Connect the DVD player directly to a TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the
copy protection system.
• S-Video output connector
The video signals are divided into color (C) and brightness (Y) signals, achieving a clearer picture.
If the TV is equipped with a S-Video input connector, we recommend connecting it to the this product’s S-Video output con-
nector using a commercially available S-Video connection cord.
HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS
If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD
player to your TV’s 75-ohm coaxial antenna terminal using an optional Stereo Audio/Video RF Modulator, not includ-
ed. Connect the audio and video outputs of the DVD player to the audio and video inputs on the RF Modulator, and
then connect the coaxial output of the RF Modulator (usually marked “TO TV”) to the 75 ohm coaxial antenna termi-
nal on your TV. Follow the instruction supplied with the RF Modulator for more details.
If your TV’s 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that
cable from your TV’s antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator
(usually marked “ANT IN”), then connect the RF modulator to your TV’s antenna
terminal as described above.
NOTE
• The picture quality from DVD discs will not be as good if the DVD player is connected to the TV’s antenna terminal
through an RF Modulator.
EN
–
–
14
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING A DISC
Basic Playback
NOTES:
• In SETUP menu, the FL OFF mode is not available.
• The FL OFF mode will be released when you press the
buttons listed below.
DVD-V VCD
CD
Getting started
OPEN/CLOSE button (on both the remote and the front
panel), SETUP, POWER or DISPLAY button (on the
remote), ON/STANDBY or FL OFF button (on the front
panel).
•
•
Turn on the power of the TV, amplifier and any other com-
ponents which are connected to the DVD.
Make sure the TV and audio receiver (commercially avail-
able) are set to the correct channel.
• To call back the setting in SETUP menu, turn off
(STANDBY) the DVD player first and turn it on again.
1
2
3
Press the POWER button.
• “P-ON” will appear briefly on the display panel.
Press the OPEN/CLOSE button to open disc load-
ing tray.
Pause
Place the disc in the tray, with the
label facing up.
DVD-V VCD
CD
MP3 WMA
1
2
During playback, press the
F
PAUSE button.
• Playback will pause and sound
will be muted.
To continue playback, press the
PLAY button.
4
Press the PLAY button.
• The tray will close automatically, and playback will then
start from the first chapter or track of the disc. If the
playback does not start automatically, press the PLAY
button.
• When you playback the DVD with a title menu, it may
appear on the screen. In this case, refer to “TITLE
MENU”.
Disc Menus
5
Press the STOP button to stop playback.
DVD-V
NOTES:
1
• A “prohibited icon” may appear at
Press the MENU button.
the top-right on the TV screen
• The DVD main menu will appear.
If the feature is not available,
appear on the TV screen.
If disc menu is available on the disc, audio lan-
guage, subtitle options, chapters for the title and
other options will appear for selection.
Press the cursor buttons ( L / K / B / s ) to select
an item, and the ENTER button to confirm selec-
tion.
during operation, warning that a
2
3
symbol may
prohibited operation has been
encountered by the DVD player or
the disc.
• With DVDs that use some titles
for playback program signals, playback may start from
the second title, or it may skip these titles.
• During the playback of two layered disc, pictures may
stop for a moment. This happens when the 1st layer
switches to the 2nd layer. This is not a malfunction.
• The operation may vary when you playback DVDs with
disc menu or Video CDs with PBC. Refer to the manual
accompanying the disc for details.
4
Title Menu
DVD-V
Press the TOP MENU button.
CANCELLING AND CALLING BACK PBC FUNCTION
1
• The title menu will appear.
If the feature is not available,
appear on the TV screen.
Press the cursor buttons ( L / K / B / s ) to select
an item, and the ENTER button to confirm selec-
tion.
VCD
2
3
symbol may
1
2
3
Insert a Video CD.
Press the STOP button.
Press the numeric buttons to enter the desired
Track number.
• PBC function is now cancelled and the playback of the
Video CD will start.
• Playback will begin at the selected Title.
4
To call back PBC function, press the STOP button
twice, and then press the PLAY button.
• Title menu will appear on the display.
VCD
1
2
When playing a Video CD with PBC func-
tion, the title menu will appear automatically.
Press the numeric buttons to select the desired
title.
General Features
• Playback will begin at the selected title.
Press the RETURN button to go back to the title
menu.
3
DVD may contain menus to navigate the disc and access spe-
cial features. Press the appropriate numerical key or use the
cursor buttons ( L / K / B / s ) to highlight your selection in
the DVD main menu and press the ENTER button to confirm.
NOTE:
CALLING UP A MENU SCREEN DURING PLAYBACK
• Unless stated, all operations described are based on
remote control use. Some operations can be carried
out using the menu bar on the TV screen.
DVD-V
•
•
Press the MENU button to call up the DVD main menu.
Press the TOP MENU button to call up the title menu.
FL OFF Mode
NOTE:
1
Press the FL OFF button on the front panel to turn
• Contents of menus and corresponding menu opera-
tions may vary between discs. Refer to the manual
accompanying the disc for details.
off the display.
•
The FL OFF indicator will light up.
EN
–
–
15
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING A DISC
Step by Step Playback
Slow Forward / Slow Reverse
DVD-V VCD
DVD-V VCD
1
2
During playback, press the
PAUSE button.
1
During playback, press the
PAUSE button.
• Playback will pause and sound
will be muted.
F
Press the g or h button.
•
Slow motion playback will begin
and sound will be muted.
D
Button
1/16
1/8
3
Press the g or h button
repeatedly to select the
required speed: 1/16, 1/8, 1/2
2
3
The disc advances by one frame each time the
PAUSE button is pressed.
To exit step by step playback, press the PLAY but-
ton.
of the normal playback.
• If you are using D/G or
H/E button on the front
panel, press and hold it for more
than 1.5 sec (the longer you
hold it, the faster the speed will
be). When you reach the
1/2
Resume
desired speed, release the button.
4
To return to normal playback, press the PLAY button.
DVD-V
CD
VCD
NOTE:
• Only Slow Forward is available when playing Video CD.
Forward speed can be selected from 1/16, 1/8, or 1/2.
1
2
During playback, press the
Resume ON
STOP button.
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
• Resume message will appear on
the TV screen.
Zoom
DVD-V VCD
The Zoom function allows you to enlarge
Press the PLAY button, playback will resume from
the point at which playback was stopped.
the video image and to pan through the enlarged image.
1
Press the ZOOM button during playback.
• To cancel resume, press the STOP button twice.
• Playback will continue.
NOTES:
2
• The resume playback takes a little longer to take place
Press the ZOOM button repeatedly to select the
required zoom factor: x2, x4 or OFF.
• Only x2 zoom is available on Video CDs.
compared to the normal playback.
• Some Video CDs with PBC function resume playback
from the beginning of the track.
• The resume information stays on even when the power
is switched off.
x2
x4
Fast Forward / Reverse Search
DVD-V VCD
CD
MP3 WMA
1
During playback, press the g or h button
repeatedly to select the required forward or reverse
speed: x2, x8, x50, x100.
3
Use the cursor buttons ( L / K / B / s ) to move
the zoomed picture across the screen.
• If you are using D/G or H/E button on the front
panel, press and hold it for more than 1.5 sec (the
longer you hold it, the faster the speed will be). When
you reach the desired speed, release the button.
2
8
50
100
• For Video CDs, the playback speed is x2, x8 or x30.
• For Audio CDs, the speed is fixed at x16.
• For MP3 and WMA the speed is fixed at x8.
To return to normal playback, press the PLAY but-
ton.
2
4
To exit zoom mode, press the ZOOM button to
OFF.
NOTES:
• Zooming function does not work while disc menu is
shown.
• x4 zoom is not available on some discs.
EN
–
–
16
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING A DISC
Track
CD
Time Search
DVD-V
CD
VCD
VCD
MP3 WMA
There are three ways to begin playback on an Audio CD,
Video CD, MP3 or WMA disc at a specific Track.
1
2
During playback, press the SEARCH MODE button
three times (CD, VCD: twice) to display the Time
Search on the TV screen.
By using the Numeric buttons
Within 30 seconds, enter a
TOTAL
1 : 23 : 45
:
:
1
Press the numeric buttons to enter the desired
Track number.
• Playback will start at the selected track.
• For single digit tracks (1-9), press a single number (eg.
track 3, press 3).
desired disc time with the
numeric buttons.
• Playback will start at the specified
time.
3
Press the CLEAR button to
•
To play track 26, press +10, 2, 6 on the numerical button.
erase the incorrect input.
By using the SEARCH MODE button
(Audio CD/Video CD)
Repeat
The REPEAT button is available only during playback.
1
Press the SEARCH MODE button.
__/ 15
• The track search display appears.
REPEAT TITLE / CHAPTER
DVD-V
To activate the repeat function, press the
REPEAT button during playback.
2
•
The repeat mode changes as described below every time
you press the button.
Within 30 seconds, select a desired track number using
the numeric buttons. For single digits press “0” first.
• Playback will start at the selected track.
OFF
CHAPTER
TITLE
(repeat off)
(current chapter repeat) (current title repeat)
By using the SKIP buttons
H
G
During playback, press the
G button to move to the next
SKIP
NOTES:
track. Press it repeatedly to skip subsequent tracks. Press the
H button to go back to the beginning of the current track.
•
•
Repeat Title/Chapter is not available with some scenes.
SKIP
Press it repeatedly to go to the previous tracks
.
The REPEAT setting will be cleared when moving to other
title or chapter.
•
Track number will appear briefly on the DVD display panel.
• If any SKIP button is pressed while the playback is
paused, the playback will be paused again after skip-
ping to the next track.
REPEAT TRACK
CD
VCD
NOTE:
To activate the repeat function, press the REPEAT button during
• The SKIP
H
G buttons are not available when play-
playback.
back is stopped.
•
The repeat mode changes as described below every time
you press the button.
Title / Chapter Search
OFF
(repeat off)
TRACK
(current track repeat)
ALL
DVD-V
(entire disc repeat)
By using the SEARCH MODE buttons
1
Press the SEARCH MODE button
once for the Chapter search,
twice for the Title search during
playback.
/2
NOTES:
•
•
•
The REPEAT setting will be cleared when moving to other track.
Repeat playback does not function during A-B repeat playback.
Repeat playback is not available when playing the Video CD
with PBC function.
MP3 JPEG WMA
2
Enter the desired chapter/title
number with the numeric buttons.
OFF
TRACK
GROUP
ALL
(repeat off)
(current track
repeat)
(current folder
repeat)
(entire disc
repeat)
By using the SKIP buttons
H
G
During playback, press the
G button to move to the next
SKIP
chapter. Press it repeatedly to skip subsequent chapters. Press
the H button to go back to the beginning of the current
SKIP
chapter. Press it repeatedly to go to the previous chapter
.
EN
–
–
17
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING A DISC
A-B REPEAT
Random Playback
DVD-V
Press the A-B REPEAT button
at your
CD
VCD
CD
1
This shuffles the playing order of tracks instead of playback
A -
in the original sequence.
1
2
In stop mode, press the MODE
RANDOM
CD [AUDIO]
chosen starting point.
TOTAL 0:45:55
button twice.
•
•
A- appears briefly on the TV
•
RANDOM screen appears
.
RANDOM PROGRAM
--no indication--
screen.
PLAY
2
3
A - B
Press the A-B REPEAT button
again at your chosen end point.
A-B appears briefly on the TV
screen, and the repeat sequence
begins.
Press the PLAY button to start
random playback.
NOTES:
•
If you wish to repeat the current track in the random selec-
tion, press the REPEAT button repeatedly until
TRACK
appears during playback. If you wish to repeat the entire ran-
dom selection press the REPEAT button repeatedly until
ALL appears during playback.
OFF
To exit the sequence, press the
A-B REPEAT button.
•
Refer to page 20 for random playback of MP3, WMA, and
JPEG.
MP3 / JPEG / WMA Playback
MP3 JPEG WMA
NOTES:
•
The A-B repeat section can only be set within the current
title (for DVDs), or current track (for Audio CDs).
A-B Repeat is not available with some scenes in DVD.
To cancel the A point which was set, press the CLEAR button.
A-B Repeat playback does not function during title, chap-
ter, track or all repeat playback.
This DVD player can reproduce images and sounds from
data recorded in MP3, JPEG and WMA formats on CD-R
and CD-RW discs.
•
•
•
The DVD player can also run JPEG files stored on Kodak
picture CD.
The user can enjoy picture images on the television set by
reproducing picture CDs.
* Picture CD is a service to convert a photograph taken by
conventional film camera into digital data and write the data
on a CD.
Program
CD
For details of Picture CD, contact a shop that deals with
developing service of Kodak Inc.
You may determine the order in which tracks will play.
1
In stop mode, press the MODE button.
• The PROGRAM screen will appear.
Information on MP3, JPEG and WMA discs
2
Press the cursor buttons
(▲ or ▼) to select a track, then
PROGRAM
TOTAL
• A file with an extension of “.mp3 (MP3)” is called an “MP3 file”.
• A file with an extension of “.jpg (JPG)” or “.jpeg (JPEG)” is
called a “JPEG file”.
The DVD player can run an image file conforming to the
Exif* specification.
* This is a file format, Exchangeable Image File format
established by Japanese Electronic Industry Development
Association (JEIDA).
• A file with an extension of “.wma (WMA)” is called a
“WMA file”.
• Files whose extension is other than “.mp3 (MP3)”, “.jpg
(JPG)”, “.jpeg (JPEG)” and “.wma (WMA)” will not be list-
ed in the MP3, JPEG, or WMA menu.
• If the file is not recorded in MP3, JPEG or WMA format, noise
may be produced even if the file extension is either of “.mp3
(MP3)”, “.jpg (JPG)”, “.jpeg (JPEG)” and “.wma (WMA)”.
press the ENTER button.
• Press the CLEAR button to erase
the most recently entered pro-
gram.
ENTER
PLAY
CLEAR
3
Press the PLAY button to play
the programmed tracks.
NOTES:
•
While the program is being played back, the STOP button works as
follows.
•
Press the STOP button once and then the PLAY button again,
playback will restart from the point where the STOP button
was pressed. (Program continued)
•
Press the STOP button twice and then the PLAY button again,
playback will restart from the track in the usual way. (Program
cleared)
•
•
Up to 99 programs can be entered.
If you wish to repeat the current track in the program, press
the REPEAT button repeatedly until
TRACK appears
during playback. If you wish to repeat the entire program
press the REPEAT button repeatedly until
ALL
appears during playback.
•
Refer to page 20 for program playback of MP3, WMA, and
JPEG.
EN
–
–
18
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING A DISC
When a disc with MP3,JPEG or WMA files is inserted in the
DVD player, the track menu will appear on the TV screen,
and number of tracks is displayed on the front panel.
For discs of JPEG or Kodak picture CD:
• A JPEG or Kodak Picture CD menu appears.
• If all menu items cannot be displayed in the screen scope,
a prompt symbol “G” appears at the right bottom of the
screen, indicating that the user can view remaining items
on the next page. If another prompt symbol “H” appears,
it indicates that the user can view other items on the previ-
ous page. The track number of the currently highlighted
item and the total tracks are shown at the center bottom of
the screen.
• If a prompt symbol “G” is shown at the right bottom, use
the SKIP G button to view the next page. If another
prompt symbol “H” is shown at the left bottom, use the
SKIP H button to view the previous page.
1
Place the disc in the tray with the label facing up.
For discs on which MP3, JPEG or WMA tracks are
recorded:
• An MP3, JPEG or WMA track menu screen appears.
• A symbol of “ ” is shown on the top of the group name.
• A symbol of “ ” is shown on the top of MP3 files.
• A symbol of “ ” is shown on the top of JPEG files.
• A symbol of “ ” is shown on the top of WMA files.
• If the picture extends beyond the scope of screen, a down
arrow “L” appears, indicating that the user can view anoth-
er part of the picture on the next page. If an up arrow “K”
appears, it indicates that the user can view another part
on the previous page. The current page number and the
number of total pages are shown on the right of the down
arrow “L”.
• The system can recognize up to 255 groups (or folders)
and up to 256 tracks. (This applies to the case where
mixed MP3, JPEG and WMA files are recorded.)
• If no MP3, JPEG or WMA files are found in the group, the
group is not displayed.
• It may take some time until all menu items are displayed
on the menu screen.
1
For JPEG, press the cursor buttons (K/L), or for
Kodak Picture CD, press the cursor buttons (s /
B / K / L), select a desired group or track to be
played, then press the PLAY or ENTER button.
• If an MP3 or WMA file is selected, reproduction will start
from the selected track and go to the next one in turn.
• If a JPEG or Kodak picture CD file is selected, an image
will be reproduced from the selected track and go to the
next one in turn.
A track is displayed for five seconds and then the next
track is displayed.
Every press on the cursor button B will turn the image
clockwise by 90 degrees when an image is displayed.
A press on the cursor button s will turn the image coun-
terclockwise by 90 degrees.
• The DVD player can reproduce data recorded as per ISO
9660 Level 1, Level 2 or Joliet on the disc.
• It can also run a disk on which data is recorded in a multi-
session.
• For more details of recording systems, see the instruction
manual for the CD-R / CD-RW drive or the writing software.
• If a group is selected, press the cursor button K/L to
select a desired group, then press the B, PLAY or ENTER
button to select a track.
If you press the PLAY or ENTER button, reproduction of
the picture will start.
Applicable MP3 file
Remarks
• It is prohibited to record
MP3 sound on a digital
device when connection is
made digitally.
• MP3 files recorded at fixed
bit rate of 112 kbps or high-
er are recommended.
Sampling fre- 44.1kHz
quency
48kHz
Notes on MP3, JPEG and WMA:
MPEG1
audio layer 3
• Select “FIRST PLAY” and press the PLAY button, playback
Type
from the top of the disc in the order of tracks and groups.
• The ninth and deeper hierarchies cannot be played.
• The name of group and track can be displayed in up to 25
characters. Unrecognizable characters will be replaced
with asterisks.
Applicable JPEG file
Remarks
• A JPEG image that extends
Upper limit:
Size of
image
6300x5100 dots beyond the screen is
Lower limit:
32x32 dots
reduced so that it will be
displayed within the screen.
• Un-reproducible groups or tracks may be displayed
depending on the recording conditions.
Applicable WMA file
Remarks
• If the TOP MENU button is pressed when a file list is dis-
played, “FIRST PLAY” will be highlighted.
• Those frequencies are
applicable to WMA version
8 only, not to WMA version
9.
Sampling fre- 44.1kHz
quency
48kHz
2
Press the STOP button, to stop playback.
Notes on Kodak picture CD:
• Ensure that the copyright
function is set to off when
preparing a WMA disc.
• A prohibition “disable” sym-
bol will appear if the user
Bit rate
48–192kbps
• A press on the STOP button will highlight the previously
displayed track on the menu screen.
Press the STOP button again or press the TOP MENU
button, and the menu screen displays Tracks 1 to 6, where
Track 1 is highlighted.
Type
WMA version 8 attempts to run a non-repro-
ducible file such as copy-
right-protected.
EN
–
–
19
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING A DISC
Slide Show Mode
Random Playback
JPEG
MP3 JPEG WMA
You can switch to the slide show mode during playback.
1
2
Press the MODE button twice
1
Press the MODE button during playback.
RANDOM
CD [DATA]
while playback is stopped.
• The slide show mode screen will appear.
• The slide show mode cannot be switched when it is
stopped, or from the file list screen or the Picture CD
menu screen.
RANDOM PROGRAM
--no indication --
PLAY
2
3
Press the ENTER button.
Press the PLAY button to play the tracks in random
order.
• Random play starts.
• For a disc containing mixed MP3, JPEG and WMA
files, random play of those files will be performed.
• The slide show mode will change.
1 The entire image appears in one time.
2 The image appears gradually and then disappears.
Press the MODE button to exit.
Program
On-Screen Information
MP3 JPEG WMA
MP3 JPEG WMA
This feature allows you to program a MP3 disc to play in a
desired sequence.
You can check each file during playback.
1
Press the DISPLAY button.
• The name of the file currently in
play will be displayed.
TRACK 01
1
2
3
Press the MODE button while
playback is stopped.
• The PROGRAM screen will
appear.
PROGRAM
MP3 COLECTION
-
FOLDER
MP3
WMA
JPEG
ALBUM01
ALBUM02
ALBUM03
ALBUM04
ALBUM05
ALBUM06
ALBUM07
1/3
1/1
ENTER
PLAY
CLEAR
ALBUM01
<Example: MP3>
2
Press the DISPLAY button again to show the track
number, the elapsed time, the repeat status, and
the playback status at the top of the screen.
Press the K or L button to
select a group, then press the
ENTER button.
PROGRAM
ALBUM01
FOLDER
MP3
WMA
JPEG
TRACK08
TRACK09
TRACK10
TRACK11
TRACK12
TRACK13
TRACK14
TRACK11
•
will be displayed when the
repeat play has been selected.
T- indicates Track repeat
G - indicates Group (folder)
repeat
1/36 0:01:15
• A track selection screen appears.
2/3
1/1
ENTER
TRACK11
PLAY
CLEAR
Press the K or L button to
select a track, then press the
ENTER, button to save it in a
program.
• Press the CLEAR button to
erase the incorrect input.
A - indicates Disc repeat
3
Press the DISPLAY button
PROGRAM
FOLDER
ALBUM05
again to exit.
MP3
WMA
JPEG
TRACK48
TRACK49
TRACK50
TRACK51
TRACK52
TRACK53
TRACK54
TRACK11
TRACK81
TRACK31
TRACK22
TRACK03
• During program or random playback, each playback
status will be displayed when you press the DISPLAY
button. Then press the DISPLAY button again to exit.
TRACK53
TRACK25
2/3
2/3
ENTER
PLAY
CLEAR
TRACK51
• The programmed track is dis-
played in the right-hand screen.
• If the entire program cannot be displayed at once on
the screen, “L” appears to go to the next page.
Track Selection
• Pressing the s button will show a list of folders that
belong to the one-level upper hierarchy than the cur-
rently selected folder.
MP3 JPEG WMA
Press the SEARCH MODE button during playback.
• The FILE LIST will appear.
1
2
4
Press the PLAY button to start programmed play-
back.
Select a desired track using the cursor buttons
• Programmed play starts.
(L/K/B/s).
NOTES:
• Press the
B
button when you want to go to the next
• Press the CLEAR button, and the last-programmed
hierarchy.
entry will be deleted.
• Press the
s
button when you want to go back to the
• Press the RETURN button, and the STOP screen will
show up with the program contents in memory.
• Press the STOP button, and then press the PLAY but-
ton. Playback will restart from the beginning of the track
being played previously.(Program cleared)
• The program setting will be cancelled when the power
is turned off or the disc tray is opened.
• Up to 99 tracks can be set in a program.
• If a disc in inserted that contains mixed MP3, JPEG
and WMA files, program setting allows 99 tracks for
combination of MP3, JPEG and WMA files.
• If eight or more tracks have been set in a program, the
user can switch the right part of the screen with the
SKIP button H or G.
previous hierarchy.
3
Press the PLAY button to start playing
NOTES:
•
•
Press the SEARCH MODE button to exit.
Some selections may require additional time to be recog-
nized.
•
•
During play, a desired track can be directly searched. Just
type in the TRACK number with the numeric buttons.
If the typed TRACK number is not available, the “disable”
symbol appears and the direct search mode is cancelled.
Playback cannot be started from a desired time count.
Pressing the SKIP button G or H will play the next or
previous file.
•
•
•
The SEARCH button is not effective for Picture CD.
EN
–
–
20
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING A DISC
Audio Language or Sound Mode
Subtitle Language
DVD-V
DVD-V
The DVD player allows you to select
The DVD player allows you to select
a language for subtitle during DVD disc (if available) playback.
a language during DVD disc (if multi language available)
playback.
1
2
Press the SUBTITLE button during playback.
Press the SUBTITLE button repeatedly to select
your desired subtitle language.
1
2
Press the AUDIO button during playback.
Press the AUDIO button repeatedly to select your
desired language.
• The selected language will be displayed on the display
bar at the top of the screen.
To turn off subtitles, press the SUBTITLE button
repeatedly until OFF appears.
1. ENG
DolbyD 5.1ch 48k/3
3
1.ENG/6
Subtitle 1
2. FRE
DolbyD 5.1ch 48k/3
2.FRE/6
Subtitle 2
3. JPN
DolbyD 5.1ch 48k/3
OFF
OFF
Bon jour
NOTES:
HELLO
•
•
•
Some discs allow audio language setting/subtitle language
setting on the disc menu. (Operation varies between discs,
so refer to the manual accompanying the disc.)
If the desired language is not shown after pressing the
SUBTITLE button several times, the disc does not have subtitles
in that language.
If you choose a Language that has a 3-letter language
code, the code will be displayed every time you change the
Subtitle language setting. If you choose any other lan-
guages, ‘---’ will be displayed instead. (Refer to page 25.)
NOTES:
• The sound mode cannot be changed during playback
of discs not recorded in double sound.
• Pressing the AUDIO button may not work on some
DVDs with multiple audio languages (e.g. DVDs which
allow audio language setting on the disc menu).
Camera Angle
Stereo Sound Mode
DVD-V
CD
VCD
Some DVD discs contain scenes which have been shot simulta-
neously from various angles. You can change the camera angle
1
Press the AUDIO button repeatedly during play-
back to select between STEREO, L-CH or R-CH.
STEREO - both right and left channels are active (stereo)
when the (
) mark appears on the screen.
1
Press the ANGLE button during playback.
L-CH - only left channel is active
R-CH - only right channel is active
• The selected angle will be displayed on the display bar
at the top of the screen.
2
Press the ANGLE button repeatedly to select your
STEREO
Both right and left channels
are active (stereo).
desired angle
.
1 / 8
L-CH
Angle 1
Angle 2
Only the left channel
is active.
2 / 8
R-CH
Only the right channel
is active.
NOTES:
8 / 8
•
If the Virtual Surround setting is ON, the sound mode will
be fixed to STEREO, and can not be changed.
Stereo sound mode will not be changed when playing DTS
CD.
Angle 8
•
EN
–
–
21
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING A DISC
Changing the On-Screen Display
4
To return to the Marker later, press the SEARCH
MODE button four times (CD, VCD: three times)
during playback and the s or B button to choose
the desired marker, then press the ENTER button.
DVD-V
You can check information about the current disc by pressing
the DISPLAY button on the remote control.
1
Press the DISPLAY button during
9/49
0:00:00 -0:00:00
NOTES:
playback to show current Chapter
.
• Opening the disc tray or turning off the power or select
• The elapsed and remaining play-
ing time of the current chapter
will be displayed.
Press the DISPLAY button again
to show current Title.
2
AC at step
all Markers.
and press the ENTER button will erase
• To clear a marker, using the s or B button, position
the cursor on to the marker number to be cleared and
press the CLEAR button.
2
3
• You can mark up to 10 points.
• The elapsed and remaining playing time of the current
5
Press the SEARCH MODE or RETURN button to
exit.
title will be displayed.
Press the DISPLAY button the
third time.
T
IIII
Black Level Setting
DVD-V VCD
• The BIT RATE and the current
repeat setting will be displayed.
• If you are playing a dual layered
disc, the layer number will also
be displayed ( L0: Layer 0 is playing. L1: Layer 1 is
playing).
Press the DISPLAY button the fourth time to remove
the display.
Adjust the Black Level Settings to make
the black parts of the picture as bright as you preferred.
1
2
Press the MODE button during playback.
4
Press the ENTER button to switch ON/OFF
.
ON (Default) : Makes the dark
parts brighter.
OFF : Shows the original pic-
ON
CD
VCD
ture as recorded.
1
2
3
Press the DISPLAY button during playback, the
current Track will be displayed on the TV screen.
• The elapsed and remaining playing time of the current
3
Press the MODE or RETURN
button to exit.
track will be displayed.
Press the DISPLAY button again to show the Total
Tracks.
• The elapsed and remaining playing time of the disc will
Virtual Surround
be displayed.
DVD-V VCD
Press the DISPLAY button for the third time to
remove the display.
You can enjoy stereophonic visual space on your existing 2
channel stereo system.
1
Press the MODE button twice
during playback
Hints for the On-Screen Display
.
•
•
•
•
C - indicates Chapter repeat
T
- indicates Title or Track repeat
G - indicates Group (folder) repeat
A - indicates Disc repeat
• A B- indicates A-B repeat
2
3
Press the ENTER button to set it 1(Natural effect),
2(Emphasized effect) or OFF.
Press the RETURN button to exit.
Marker Setup Screen
CD
MP3 WMA
DVD-V
CD
VCD
Use markers to memorise
your favourite places on a disc.
1
2
Press the MODE button during playback
Press the ENTER button to set 1(Natural effect),
2(Emphasized effect) or OFF.
.
1
Press the SEARCH MODE
button four times (CD, VCD:
three times) during playback.
• The display screen and Markers
will appear on the TV screen.
3
Press the RETURN button to exit.
NOTE:
• Select Virtual Surround OFF or adjust the volume down
if the sound is distorted.
2
3
Press the s or B button to select 1, 2, 3, 4, 5, 6,
7, 8, 9, or 10 and ensure that “- : - - : - -” appears
in the display.
When reaches the desired point, press the ENTER
button.
• The Title or Track and elapsed playing time will appear
in the TV screen.
EN
–
–
22
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD SETUP
In Setup menu, QUICK mode and CUSTOM mode are availale. QUICK mode consists of the set-
ting menus often needed, and you can make all settings required in CUSTOM mode.
You can make the settings of the items with QUICK mark in QUICK mode.
Language Setting
Display Setting
You can change certain aspects of the DVD display screens, on-screen
messages and the display panel on the front of the DVD player.
Language options are not available with some discs.
1
2
Press the SETUP button in STOP mode.
Press the B button to select CUSTOM, then press the
ENTER button.
1
2
Press the SETUP button in STOP mode.
Press the B button to select CUSTOM, then press
the ENTER button.
• CUSTOM mode will appear.
•
CUSTOM mode will appear.
3
Press the s or B button to se-
3
Press the s or B button to se-
lect DISPLAY, then the ENTER
button to confirm.
lect LANGUAGE, then the EN-
TER button to confirm.
LANGUAGE
AUDIO
ENGLISH
ENGLISH
ENGLISH
ENGLISH
DISPLAY
SUBTITLE
DISC MENU
PLAYER MENU
TV ASPECT
PANEL DISPLAY
ANGLE ICON
16:9 WIDE
BRIGHT
ON
AUTO POWER OFF
ON
4
Press the K or L button to select the below items,
4
Press the K or L button to select the below items, then
press the ENTER button.
then press the ENTER button.
(Default : ENGLISH)
AUDIO
• Sets the audio language.
(Default : 16:9 WIDE)
TV ASPECT
QUICK
LANGUAGE
AUDIO
ORIGINAL
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
DISPLAY
TV ASPECT
• Press the K or L button for an
item selection, then press the
ENTER button.
Select 4:3 LETTER BOX for a
black bars appears on top and
bottom of the screen.
SWEDISH
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
(Default : ENGLISH)
SUBTITLE
•
• Sets the subtitle language.
LANGUAGE
SUBTITLE
OFF
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SWEDISH
•
•
Select 4:3 PAN & SCAN for a full height picture with both
sides trimmed.
Select 16:9 WIDE if a wide-screen TV is connected to the
DVD player.
(Default : ENGLISH)
DISC MENU
(Default : BRIGHT)
PANEL DISPLAY
• Sets the language for DVD Menu.
LANGUAGE
DISC MENU
• Press the K or L button for an
item select BRIGHT, DIMMER
and AUTO, then press the ENTER
button.
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
DISPLAY
PANEL DISPLAY
BRIGHT
DIMMER
AUTO
SWEDISH
DUTCH
• This adjust the brightness of the
display panel with the factory de-
fault BRIGHT.
PLAYER MENU
(Default : ENGLISH)
QUICK
LANGUAGE
PLAYER MENU
• Sets the language for the On-
Screen display.
•
When AUTO is selected, the display dims only during playback.
ENGLISH
FRANCAIS
ESPANOL
(Default : ON)
ANGLE ICON
• Press the ENTER button repeat-
edly to turn Angle mark ON or
OFF.
DISPLAY
TV ASPECT
PANEL DISPLAY
ANGLE ICON
16:9 WIDE
BRIGHT
ON
AUTO POWER OFF
ON
5
Press the K or L button to select a setting, then
press the ENTER button.
•
If OTHER is selected in the AUDIO, SUBTITLE or DISC
MENU screen, press four-digit number to enter the code for
the desired language. (Refer to the language code list on
page 25).
(Default :ON)
AUTO POWER OFF
• Press the ENTER button repeat-
edly to turn Auto Power ON or
OFF.
DISPLAY
•
Only the languages supported by the disc can be selected.
TV ASPECT
PANEL DISPLAY
ANGLE ICON
16:9 WIDE
BRIGHT
ON
• It will turn the DVD player to off au-
tomatically after 35 minutes of no
use.
Press the SETUP button to ex-
it.
6
Press the SETUP button to exit.
AUTO POWER OFF
ON
NOTE:
•
Language Setting for Dialog and Subtitle is not available
with some discs. Then use the AUDIO and SUBTITLE but-
tons.
5
NOTE:
Details are on page 21.
•
Be sure to press the SETUP button, or the setting will not work.
EN
–
–
23
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD SETUP
PARENTAL LEVEL
Audio Setting
Rating Level allows you to set the rating level of your DVD discs.
Playback will stop if the disc’s ratings exceed the level you set.
Choose the appropriate Audio settings for your equipment as it
only affect during the playback of DVD discs of the DVD player.
1
Press the SETUP button in STOP mode.
Press the B button to select CUSTOM, then press
the ENTER button.
1
2
Press the SETUP button in STOP mode.
2
Press the B button to select CUSTOM, then press
the ENTER button.
• CUSTOM mode will appear.
3
4
Press the s or B button to select PARENTAL, then
press the ENTER button.
Enter your four-digit password then press the EN-
TER button.
3
Press the s or B button to
select AUDIO, then the ENTER
button to confirm.
AUDIO
DRC
DOLBY DIGITAL
DTS
OFF
ON
OFF
DOWN SAMPLING ON
5
Press the K or L button to se-
lect PARENTAL LEVEL, then
4
Press the K or L button to select the below items,
press the ENTER button.
PARENTAL
then press the ENTER button.
Please enter
a
4-digit password.
DRC (Dynamic Range Control)
(Default : OFF)
AUDIO
• To compress the range of sound
DRC
DOLBY DIGITAL
DTS
OFF
ON
OFF
6
7
Press the K or L button to se-
lect the desired level, then
press the ENTER button.
volume.
DOWN SAMPLING ON
PARENTAL
PARENTAL LEVEL ALL
CHANGE
(Default : ON)
DOLBY DIGITAL
QUICK
AUDIO
Set to ON when the player is con-
nected to Dolby Digital Decoder.
Press the SETUP button to ex-
DRC
DOLBY DIGITAL
DTS
OFF
ON
OFF
it.
DOWN SAMPLING ON
NOTES:
ON : Output by Dolby Digital
OFF : Convert the Dolby Digital to
PCM
•
•
•
When doing this for the first time, en-
PARENTAL
PARENTAL LEVEL
ter any 4 digits.(except for 4737)That
number will be used as the password
from the second time onward.
ALL
8
7[NC-17]
6[R]
5
DTS (Default : ON)
ON : Output by DTS sound
Set to DTS when the unit is
connected to DTS Decoder.
OFF : No DTS sound will be out-
put.
4[PG13]
3[PG]
To change the password, press the K or
AUDIO
L button to select CHANGE at step
5
,
then press the ENTER button. Enter the four-digit password, then
press the ENTER button.
DRC
DOLBY DIGITAL
DTS
OFF
ON
OFF
DOWN SAMPLING ON
With some DVDs, it may be difficult to find if they are com-
patible with parental lock.Be sure to check if the parental lock
function operates in the way that you have set.
Record the password in case you forget it.
The parental lock level is equivalent to the following USA movie
ratings.
(Default : ON)
DOWN SAMPLING
•
•
• Set to ON when outputting in
48kHz.
AUDIO
DRC
DOLBY DIGITAL
DTS
OFF
ON
OFF
LEVEL 7: NC-17
LEVEL 6: R
DOWN SAMPLING ON
LEVEL 4: PG13
LEVEL 3: PG
LEVEL 1: G
The parental lock levels for “CANADA” are included for future use.
Check the appropriate parental lock level when you buy a DVD
video disc equipped with the parental lock feature in the future.
When playing disc with copyright Protection
• Even If you select OFF, copyright protection will be acti-
vated and sound will be down sampled at 48kHz.
5
Press the SETUP button to exit.
IF YOU FORGET THE PASSWORD
1
Press 4, 7, 3, 7 at step 4.
Parental Control
•
Password will be cleared and rating level will be set to ALL.
2
Repeat steps 5-7 to re-establish the parental lock.
Ratings Control limits playback of discs with unsuitable audience
ratings. A four digit code established by the user will unlock the
parental lock.
This feature allows you to prevent discs with objectionable
scenes from being played by your children.
CONTROL LEVELS
•
ALL
Parental lock is cancelled.
Level 8
•
•
•
DVD software of any grade (adult/general/children) can
be played back.
Levels 7 to 2
Only DVD software intended for general use and chil-
dren can be played back.
Level 1
Only DVD software intended for children can be played back,
with those intended for adult and general use prohibited.
EN
–
–
24
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD SETUP
Language
A-B
Abkhazian
Afar
Code
Language
Frisian
Code
Language
Malay
Code
Language
Code
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
Somali
Spanish [SPA]
Sundanese
Swahili
Swedish [SWE]
T
6561
5165
6567
6569
6568
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
Galician
Malayalam
Maltese
Maori
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian [HUN]
I-K
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
Irish [IRI]
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Afrikaans
Albanian
Amharic
Marathi
Moldavian
Mongolian
Nauru
Arabic
Tagalog
Tajik
Tamil
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
Armenian
Assamese
Aymara
Nepali
Norwegian [NOR]
O-R
Occitan
Tatar
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Telugu
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
6467
Thai
Oriya
Oromo(Afan)
Panjabi
Pashto;Pushto
Persian
Polish
Portuguese [POR]
Quechua
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
S
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Tibetan
Tigrinya
Tonga
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
Tsonga
Turkish [TUR]
Turkmen
Twi
Bislama
Breton
Bulgarian
Burmese
Byelorussian
C-E
Cambodian
Catalan
Chinese [CHI]
Corsican
Croatian
Czech
U-Z
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
6565
6557
6558
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
F-H
Korean [KOR]
Kurdish
L-N
Laothian
Latin
Latvian;Lettish
Lingala
Lithuanian
Macedonian
Malagasy
5861
5847
5868
5860
5866
5957
5953
Faroese
5261
5256
5255
5264
Singhalese
Siswat
Slovak
Fiji
Finnish [FIN]
French [FRE]
Slovenian
If you choose a Language that has a 3-letter language code, the code will be displayed every time you change the Audio or Subtitle language
setting on page 21. If you choose any other languages, ‘---’ will be displayed instead. (3-letter language code is written in bracket.)
MAINTENANCE
Cleaning the Cabinet
• Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits,
ammonia or abrasives.
Cleaning Discs
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out. Do not wipe in a circular
motion.
• Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, adrasive cleaning agents or
antistatic spray intended for analogue records.
Cleaning the disc lens
• If the player still does not perform properly when it is operated while referring to the relevant sections and to “TROU-
BLESHOOTING GUIDE” in this Operating Instruction, the laser optical pickup unit may be dirty. Consult your dealer or
an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.
Disc Handling
• Use discs which have the following logos on them.
(Optical audio digital discs.)
• Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.
• Always store the disc in its protective case when it is not used.
•
Note that discs with special shapes (heart-shaped discs, octagonal discs, etc.) cannot be
played on the this product. Do not attempt to play such discs, as they may damage the player.
DIGITAL VIDEO
Make your contribution to the environment!!!
• Used up batteries do not belong in the dust bin.
•
You can dispose of them at a collection point for used up batteries or special waste. Contact your council for details.
EN
–
–
25
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING GUIDE
If the DVD player does not perform properly when operated as instructed in this Operating Instruction, check the player, con-
sulting the following checklist.
Problem
No power
Solution
–Check if the AC power cord is properly connected.
–Unplug the outlet once, and wait for 5-10seconds and then plug it in
again
No sound or picture
–Check if the TV is switched on.
–Check the video connection
–Check the VIDEO/AUDIO cable connections to the TV
(See Connecting to a TV)
–Check if the progressive switch is set correctly according to your TV.
If your TV is not compatible with progressive scan, keep the
Progressive switch to “INTERLACE.”
Distorted picture
–Sometimes a small amount of picture distortion may appear.
This is not a malfunction.
–Connect the player directly to the TV.
–Connect DVD player directly to the TV.
–Make sure the disc is compatible with the DVD player.
–Adjust the volume.
Completely distorted picture or
black/white picture with DVD
No sound or distorted sound
–Check that the speakers are connected correctly.
–Check the digital connections.
No audio at digital output
–Check if the audio format of the selected audio language matches
your receiver capabilities.
Picture freezes momentarily
during playback
–Check the disc for fingerprints/scratches and
clean with a soft cloth wiping from center to edge.
–Clean the disc
Disc can’t be played
–Clean the disc
–Ensure the disc label is facing up.
–Check if the disc is defective by trying another disc.
–Cancel the parental lock or change the control level.
–Insert a correct disc that plays on this player.
–Reset the player by switching the player off, then on again.
No return to start-up screen when
disc is removed
The player does not respond to
the remote control
–Aim the remote control directly at the sensor on the front of the player.
–Reduce the distance to the player.
–Replace the batteries in the remote control.
–Re-insert the batteries with their polarities (+/– signs) as indicated.
–To completely reset the player, unplug the AC
cord from the AC outlet for 5-10 seconds.
Buttons do not work or player stops
responding
Player does not respond to some
operating commands during playback
DVD player cannot read
CDs/DVDs
–Operations may not be permitted by the disc.
Refer to the instructions of the disc.
–Use a commonly available cleaning CD/DVD to
clean the lens before sending the DVD player for repair.
–The angle cannot be switched for DVDs which do not contain
multiple angles. In some cases multiple angles are only recorded
for specific scenes.
Angle does not switch
Playback does not start when the title is selected –Check the “PARENTAL” setting.
The password for rating level has been forgotten –Enter the default password “4737”, then your forgotten password
will be cleared
NOTES:
Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Operating
Instruction for details on correct operations.
•
Playback from a desired track and random playback are not available during program playback.
EN
–
–
26
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
SIGNAL SYSTEM
DIGITAL AUDIO OUTPUT
NTSC color
Optical digital output: Optical connector, 1 set
Coaxial digital output: Pin jack, 1 set
APPLICABLE DISCS
(1) DVD-Video Discs
POWER SUPPLY
1-layer 12cm single-sided discs, 2-layer 12cm single-sided
discs, 2-layer 12cm double-sided discs (1 layer per side)
1-layer 8cm single-sided discs, 2-layer 8cm single-sided
discs, 2-layer 8cm double-sided discs (1 layer per side)
(2) DVD-R/DVD-RW
(3) Compact discs (Audio CD, Video CD)
12cm discs, 8cm discs
(4) CD-R/CD-RW
AC 120V, 60Hz
POWER CONSUMPTION
11W (Standby: 0.4W)
MAXIMUM EXTERNAL DIMENSIONS
440 (width) x 75 (height) x 211 (depth) mm
(17-5/16” x 2-61/64” x 8-5/16”) (including protruding parts)
S-VIDEO OUTPUT
Y output level: 1Vp-p (75Ω/ohms)
C output level: 0.286Vp-p
Output connectors: S connectors, 1 set
MASS
2.1Kg (4.6lbs)
REMOTE CONTROL UNIT
RC6400DV
Infrared pulse type
VIDEO OUTPUT
Output level: 1Vp-p (75Ω/ohms)
Output connector: Pin jacks, 1 set
Supply: DC 3V, 2 R6P/AA batteries
COMPONENT OUTPUT
Y output level: 1Vp-p (75Ω/ohms)
CB/PB output level: 0.7Vp-p (75Ω/ohms)
CR/PR output level: 0.7Vp-p (75Ω/ohms)
Output connector: Pin jacks, 1 set
AUDIO OUTPUT
Output level: 2Vrms
2 channel (L, R) output connector: Pin jack, 1 set
AUDIO OUTPUT PROPERTIES
(1) Frequency response
1 DVDs (linear PCM) : 4Hz to 22kHz (48 kHz sampling)
: 4Hz to 44kHz (96 kHz sampling)
2 CDs
(2) S/N ratio
: 4Hz to 20kHz
: 115dB
(3) Total harmonic distortion : 1kHz CD: 0.003%
(4) Dynamic range
: DVD: 100dB
CD: 98dB
EN
–
–
27
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
You can find your nearest authorized distributor or dealer on our website.
JAPAN
U.S.A
Marantz Japan, Inc.
Marantz America, Inc.
Marantz Europe B.V.
35-1 Sagami Ohno 7-Chome, Sagamihara-shi, kanagawa 228-8505, Japan
1100 Maplewood Drive, Itasca, IL 60143, U.S.A.
EUROPE
P.O. Box 8744, 5605 LS Eindhoven, The Netherlands
is a registered trademark.
2003/10
MITi
44AW851250
Printed in China
0VMN03859
★★★★★
E57M0UD
Download from Www.Somanuals.com. All Manuals Search And Download.
|