Makita Impact Driver BTW072 User Manual

Cordless Impact  
Wrench  
Equipped with Electric Brake  
MODEL BTW072  
001278  
I N S T R U C T I O N M A N U A L  
WARNING:  
For your personal safety, READ and UNDERSTAND before using.  
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Keep bystanders, children, and visitors  
away while operating a power tool. Distrac-  
tions can cause you to lose control.  
Tool Use and Care  
12. Use clamps or other practical way to  
secure and support the workpiece to a  
stable platform. Holding the work by hand or  
against your body is unstable and may lead  
to loss of control.  
Electrical Safety  
4. A battery operated tool with integral bat-  
teries or a separate battery pack must be  
recharged only with the specified charger  
for the battery. A charger that may be suit-  
able for one type of battery may create a risk  
of fire when used with another battery.  
13. Do not force tool. Use the correct tool for  
your application. The correct tool will do the  
job better and safer at the rate for which it is  
designed.  
5. Use battery operated tool only with specif-  
ically designated battery pack. Use of any  
other batteries may create a risk of fire.  
14. Do not use tool if switch does not turn it  
on or off. A tool that cannot be controlled  
with the switch is dangerous and must be  
repaired.  
Personal Safety  
15. Disconnect battery pack from tool or  
place the switch in the locked or off posi-  
tion before making any adjustments,  
changing accessories, or storing the tool.  
Such preventive safety measures reduce the  
risk of starting the tool accidentally.  
6. Stay alert, watch what you are doing, and  
use common sense when operating a  
power tool. Do not use tool while tired or  
under the influence of drugs, alcohol, or  
medication. A moment of inattention while  
operating power tools may result in serious  
personal injury.  
16. Store idle tools out of reach of children  
and other untrained persons. Tools are  
dangerous in the hands of untrained users.  
7. Dress properly. Do not wear loose cloth-  
ing or jewelry. Contain long hair. Keep  
your hair, clothing, and gloves away from  
moving parts. Loose clothes, jewelry, or long  
hair can be caught in moving parts.  
17. When battery pack is not in use, keep it  
away from other metal objects like: paper  
clips, coins, keys, nails, screws, or other  
small metal objects that can make a con-  
nection from one terminal to another.  
Shorting the battery terminals together may  
cause sparks, burns, or a fire.  
8. Avoid accidental starting. Be sure switch  
is in the locked or off position before  
inserting battery pack. Carrying tools with  
your finger on the switch or inserting the bat-  
tery pack into a tool with the switch on invites  
accidents.  
18. Maintain tools with care. Keep cutting  
tools sharp and clean. Properly maintained  
tools with sharp cutting edge are less likely to  
bind and are easier to control.  
9. Remove adjusting keys or wrenches  
before turning the tool on. A wrench or a  
key that is left attached to a rotating part of  
the tool may result in personal injury.  
19. Check for misalignment or binding of  
moving parts, breakage of parts, and any  
other condition that may affect the tool’s  
operation. If damaged, have the tool ser-  
viced before using. Many accidents are  
caused by poorly maintained tools.  
10. Do not overreach. Keep proper footing  
and balance at all times. Proper footing and  
balance enable better control of the tool in  
unexpected situations.  
20. Use only accessories that are recom-  
mended by the manufacturer for your  
model. Accessories that may be suitable for  
one tool may create a risk of injury when  
used on another tool.  
11. Use safety equipment. Always wear eye  
protection. Dust mask, non-skid safety  
shoes, hard hat, or hearing protection must  
be used for appropriate conditions.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
22. When servicing a tool, use only identical  
replacement parts. Follow instructions in  
the Maintenance section of this manual.  
Use of unauthorized parts or failure to follow  
Maintenance instructions may create a risk of  
shock or injury.  
SERVICE  
21. Tool service must be performed only by  
qualified repair personnel. Service or main-  
tenance performed by unqualified personnel  
may result in a risk of injury.  
SPECIFIC SAFETY RULES  
USB025-2  
DO NOT let comfort or familiarity with product (gained from  
repeated use) replace strict adherence to cordless impact  
wrench safety rules. If you use this tool unsafely or incorrectly,  
you can suffer serious personal injury.  
1. Hold tool by insulated gripping surfaces  
when performing an operation where the  
cutting tool may contact hidden wiring.  
Contact with a “live” wire will also make  
exposed metal parts of the tool “live” and  
shock the operator.  
4. Check the socket carefully for wear,  
cracks or damage before installation.  
5. Hold the tool firmly.  
6. Always be sure you have a firm footing.  
7. Be sure no one is below when using the  
2. Be aware that this tool is always in an  
operating condition, because it does not  
have to be plugged into an electrical out-  
let.  
tool in high locations.  
8. The proper fastening torque may differ  
depending upon the kind or size of the  
bolt. Check the torque with  
wrench.  
a
torque  
3. Wear ear protectors.  
SAVE THESE INSTRUCTIONS  
WARNING:  
MISUSE or failure to follow the safety rules stated in this  
instruction manual may cause serious personal injury.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
SYMBOLS  
USD302-1  
The followings show the symbols used for tool.  
V .......................volts  
.../min................revolutions or reciprocation per  
minute  
...................direct current  
................number of blow  
...................no load speed  
n
˚
IMPORTANT SAFETY INSTRUCTIONS FOR  
CHARGER & BATTERY CARTRIDGE  
USC002-3  
1. SAVE THESE INSTRUCTIONS- This man-  
ual contains important safety and operat-  
ing instructions for battery charger.  
6. To reduce risk of damage to electric plug  
and cord, pull by plug rather than cord  
when disconnecting charger.  
2. Before using battery charger, read all  
instructions and cautionary markings on  
(1) battery charger, (2) battery, and (3)  
product using battery.  
7. Make sure cord is located so that it will  
not be stepped on, tripped over, or other-  
wise subjected to damage or stress.  
8. An extension cord should not be used  
unless absolutely necessary. Use of  
improper extension cord could result in a  
risk of fire and electric shock. If extension  
cord must be used, make sure:  
3. CAUTION - To reduce risk of injury, charge  
only MAKITA rechargeable batteries  
marked on the charger label. Other types  
of batteries may burst causing personal  
injury and damage.  
a. That pins on plug of extension cord  
are the same number, size, and shape  
as those of plug on charger;  
4. Do not expose charger to rain or snow.  
5. Use of an attachment not recommended  
or sold by the battery charger manufac-  
turer may result in a risk of fire, electric  
shock, or injury to persons.  
b. That extension cord is properly wired  
and in good electrical condition; and  
c. That wire size is at least as large as  
the one specified in the table below.  
Table 1: RECOMMENDED MINIMUM AWG SIZE FOR EXTENSION CORDS FOR BATTERY CHARGERS  
Length of Cord (Feet)  
AWG Size of Cord  
25  
18  
50  
18  
100  
18  
150  
16  
9. Do not operate charger with damaged  
10. Do not operate charger if it has received a  
sharp blow, been dropped, or otherwise  
damaged in any way; take it to a qualified  
serviceman.  
cord or plug - replace them immediately.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
11. Do not disassemble charger or battery  
cartridge; take it to a qualified serviceman  
when service or repair is required. Incor-  
rect reassembly may result in a risk of  
electric shock or fire.  
14. Young children should be supervised to  
ensure that they do not play with the bat-  
tery charger.  
15. If operating time has become excessively  
shorter, stop operating immediately. It  
may result in a risk of overheating, possi-  
ble burns and even an explosion.  
12. To reduce risk of electric shock, unplug  
charger from outlet before attempting any  
maintenance or cleaning. Turning off con-  
trols will not reduce this risk.  
16. If electrolyte gets into your eyes, rinse  
them out with clear water and seek medi-  
cal attention right away. It may result in  
loss of your eyesight.  
13. The battery charger is not intended for  
use by young children or infirm persons  
without supervision.  
ADDITIONAL SAFETY RULES FOR CHARGER &  
BATTERY CARTRIDGE  
1. Do not charge Battery Cartridge when  
temperature is BELOW 10°C (50°F) or  
ABOVE 40°C (104°F).  
(3) Do not expose battery cartridge to  
water or rain.  
A battery short can cause a large current  
flow, overheating, possible burns and  
even a breakdown.  
2. Do not attempt to use a step-up trans-  
former, an engine generator or DC power  
receptacle.  
5. Do not store the tool and Battery Car-  
tridge in locations where the temperature  
may reach or exceed 50°C (122°F).  
3. Do not allow anything to cover or clog the  
charger vents.  
4. Do not short the battery cartridge:  
6. Do not incinerate the Battery Cartridge  
even if it is severely damaged or is com-  
pletely worn out. The battery cartridge can  
explode in a fire.  
(1) Do not touch the terminals with any  
conductive material.  
(2) Avoid storing battery cartridge in a  
container with other metal objects  
such as nails, coins, etc.  
7. Be careful not to drop, shake or strike bat-  
tery.  
SAVE THESE INSTRUCTIONS  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
SYMBOLS  
The following show the symbols used for the charger. Be sure that you understand their  
meaning before use.  
.......... Ready to charge  
.............Charging  
...........Delay charge (Cooling)  
........Defective battery  
....Conditioning  
.............Charging complete  
...........Cooling abnormality  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
FUNCTIONAL  
DESCRIPTION  
CAUTION:  
Always be sure that the tool is switched off and the  
battery cartridge is removed before adjusting or  
checking function on the tool.  
001251  
Installing or removing battery cartridge  
To remove the battery cartridge, withdraw it from the tool  
while pressing the buttons on both sides of the cartridge.  
To insert the battery cartridge, align the tongue on the  
battery cartridge with the groove in the housing and slip  
it into place. Always insert it all the way until it locks in  
place with a little click. If not, it may accidentally fall out  
of the tool, causing injury to you or someone around you.  
1
2
1. Battery cartridge  
2. Button  
Do not use force when inserting the battery cartridge. If  
the cartridge does not slide in easily, it is not being  
inserted correctly.  
001253  
Charging  
1. Plug the battery charger into the proper AC voltage  
source. Two charging lights will flash in green color  
repeatedly.  
1
2
3
4
2. Insert the battery cartridge into charger until it stops  
adjusting to the guide of charger. Terminal cover of  
charger can be opened with inserting and closed with  
pulling out the battery cartridge.  
1. Battery cartridge  
2. Terminal cover  
3. Charging lights  
4. Battery charger  
3. When the battery cartridge is inserted, the charging light  
color will change from green to red and charging will  
begin. The charging light will keep lighting up lit steadily  
during charging. One red charging light indicates  
charged condition in 0 - 80% and two red ones indicates  
80 - 100%.  
4. With finish of charge, the charging lights will change  
from two red ones to two green ones.  
5. If you leave the battery cartridge in the charger after the  
charging cycle is complete, the charger will switch into  
its trickle charge (maintenance charge)mode which  
will last approximately 24 hours.  
6. After charging, unplug the charger from the power  
source.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE:  
The battery charger is for charging Makita battery  
cartridge. Never use it for other purposes or for other  
manufacturers batteries.  
When you charge a new battery cartridge or a battery  
cartridge which has not been used for a long period of  
time, it may not accept a full charge. This is a normal  
condition and does not indicate a problem. You can  
recharge the battery cartridge fully after discharging it  
completely and recharging a couple of times.  
If you charge a battery cartridge from a just operated tool  
or battery cartridge which has been left in a location  
exposed to direct sunlight for a long time, the charging  
light may flash in red color. If this occurs, wait for a while.  
Charging will begin after the battery cartridge is cooled  
by the cooling fan installed in the charger. When the  
temperature on battery is more than approx. 70°C, two  
charging lights may flash in red color, and when approx.  
50°C - 70°C, one charging light in red color.  
If the charging light flashes alternately in green and red  
color, charging is not possible. The terminals on the  
charger or battery cartridge are clogged with dust or the  
battery cartridge is worn out or damaged.  
Any of the following conditions indicates damage to the  
charger and/or battery cartridge. Ask your Makita  
Authorized or Factory Service Center to check them.  
(1) The charging light does not flash (green) when the  
battery charger is plugged into a power source.  
(2) The charging light does not light up or flash (red)  
when the battery is inserted in the charger port.  
(3) Charging is not completed at even more than two  
hours after red light comes ON at start of charging.  
Conditioning charge  
Conditioning charge can extend the life of battery by auto-  
matically searching the optimum charging condition for the  
batteries in every situations.  
The battery employed in the following conditions repeatedly,  
will be worn out shortly, and yellow warning light may flash.  
1. Recharge of battery with its high temperature  
2. Recharge of battery with its low temperature  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Recharge of full charged battery  
4. Over-discharge of battery (continue to discharge battery  
in spite of down of power.)  
5. Recharge under broken cooling system  
The charging time of such battery is longer than usual.  
Trickle charge (Maintenance charge)  
If you leave the battery cartridge in the charger to prevent  
spontaneous discharging after full charge, the charger will  
switch into its trickle charge (maintenance charge)mode  
and keep the battery cartridge fresh and fully charged.  
Tips for maintaining maximum battery life  
1. Charge the battery cartridge before completely dis-  
charged.  
Always stop tool operation and charge the battery car-  
tridge when you notice less tool power.  
2. Never recharge a fully charged battery cartridge.  
Overcharging shortens the battery service life.  
3. Charge the battery cartridge with room temperature at  
10°C - 40°C (50°F - 104°F).  
Let a hot battery cartridge cool down before charging it.  
4. Charge the Nickel Metal Hydride battery cartridge when  
you do not use it for more than six months.  
Refresh charging  
Refreshing adapter (optional accessory) can refresh an inac-  
tive battery cartridge.  
Refresh charging should be done once a week.  
When you charge a new battery cartridge or a battery  
cartridge that has not been used for a long time, it may  
not accept a full charge. In this case, refresh charging  
must be done. The battery cartridge my decrease the  
tool performance, because the chemical substance of  
the battery cartridge is inactive.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
001254  
Checking the remaining battery capacity  
When charging  
Indicating lamp  
E
Capacity  
F
(C)  
When the charging begins, the first (far left) indicating lamp  
begins to flicker. Then, as charging proceeds, the other  
lamps light, one after the other, to indicate the battery capac-  
ity.  
80% - 100%  
60% - 80%  
40% - 60%  
10% - 40%  
0% - 10%  
orange  
When using  
Indicating lamp  
When the tool is switched on, the lamps will light to indicate  
the remaining battery capacity. When the tool is switched off,  
the light goes out after approx. 5 seconds. If the battery has  
not been used for a long time, or is needed refresh charging,  
the orange lamp begins to flicker. Use Makita refreshing  
adapter to refresh the battery.  
Capacity  
F
E
80% - 100%  
60% - 80%  
40% - 60%  
10% - 40%  
0% - 10%  
orange  
CAUTION:  
A battery cartridge extracted from the charger that has  
been unplugged with the battery cartridge inserted does  
not work even if it is inserted in the tool. At this time,  
recharge it for about five seconds before use.  
001255  
Switch action  
CAUTION:  
Before inserting the battery cartridge into the tool,  
1
always check to see that the switch trigger actuates  
properly and returns to the OFFposition when  
released.  
To start the tool, simply pull the switch trigger. Tool speed is  
increased by increasing pressure on the switch trigger.  
Release the switch trigger to stop.  
1. Switch trigger  
001257  
Reversing switch action  
This tool has a reversing switch to change the direction of  
rotation. Depress the reversing switch lever from the A side  
for clockwise rotation or from the B side for counterclockwise  
rotation.  
1
A
B
When the reversing switch lever is in the neutral position, the  
switch trigger cannot be pulled.  
1. Reversing switch lever  
CAUTION:  
Always check the direction of rotation before operation.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use the reversing switch only after the tool comes to a  
complete stop. Changing the direction of rotation before  
the tool stops may damage the tool.  
When not operating the tool, always set the reversing  
switch lever to the neutral position.  
001258  
The remaining Battery capacity  
Auto-stop mechanism  
(C)  
E
E
F
The tool stops automatically (Red color lamp lights on) after  
the battery capacity reaches under 20% to prevent the lack  
of fastening torque. Charge the battery or use a new fully  
charged one.  
F
Auto-stop setting for number of impacts  
This tool has a convenient auto-stop mechanism that allows  
you to preset the desired number of impacts in terms of the  
application. The tool then stops automatically after reaching  
the preset number of impacts.  
001259  
1. Pulling the trigger, insert the battery cartridge. Keep on  
pulling the trigger after inserting the battery cartridge.  
(The indicating lamp on the back of the tool will flash  
about 10 times, then the lamp will keep lighting up lit.)  
1
ON  
2
3
1. Indicating lamp  
2. Switch trigger  
3. Battery cartridge  
001260  
2. Hit the tool housing around the grip once with a screw-  
driver etc. (The indicating lamp will go out.)  
1
2
1. Tool housing  
2. Screwdriver  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
001261  
3. Release the trigger. (The indicating lamp will keep light-  
ing up lit for 0.5 seconds, then the lamp will go out.)  
OFF  
4. Hit the tool housing preset number of first digit except 0.  
(The indicating lamp will light up in green color. Then,  
the light goes out.)  
Example:  
When the preset number is 12, hit the tool  
housing once.  
5. Pull the trigger, then release it.  
6. Hit the tool housing preset number of second digit  
except 0. (The indicating lamp will light up in red color.  
Then, the light goes out.)  
Example:  
When the preset number is 12, hit the tool  
housing two times.  
7. Pull the trigger, then release the trigger. (The indicating  
lamp will light up.)  
8. Remove the battery cartridge. (Presetting has finished.)  
(The indicating lamp will go out.)  
CAUTION:  
When you change the presetting, do the same  
procedure as above 1 - 8.  
Confirming the presetting  
Switch off the tool and insert the battery cartridge. The indi-  
cating lamp will indicate the presetting number. Green lamp  
shows the first digit. Red lamp shows the second digit.  
Example:  
presetting number is 12.  
1. Green color lamp flashes once.  
2. Red color lamp flashes two times.  
3. The lamp goes out.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Relation between presetting number and action  
003612  
Clockwise rotation  
Counterclockwise rotation  
Auto-stop setting does not work.  
Presetting number  
00  
Auto-stop setting does not work.  
01 - 99  
After impacting [number of impacts Auto-stop setting does not work.  
(presetting number x 2) x 0.02]  
seconds.  
Indication lamp goes out.  
Green color lamp lights on.  
Switch off before impacting [number  
of impacts (presetting number x 2) x  
0.02] seconds.  
Red color lamp lights on.  
Then, the lamp goes out.  
Indicating lamp  
After impacting preset numbers, the indicating lamp  
lights in green color.  
The red color light will light on if the trigger is pulled  
before the presetting number of impacts is achieved. It  
indicates that the operation is incomplete.  
ASSEMBLY  
CAUTION:  
Always be sure that the tool is switched off and the  
battery cartridge is removed before carrying out any  
work on the tool.  
Selecting correct socket  
Always use the correct size socket for bolts and nuts. An  
incorrect size socket will result in inaccurate and inconsistent  
fastening torque and/or damage to the bolt or nut.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
001265  
Installing or removing socket  
1
To install the socket, push it onto the anvil of the tool until it  
locks into place.  
To remove the socket, simply pull it off.  
2
1. Socket  
2. Anvil  
[*1] Presetting number of impacts is impossible for more than  
200 impacts (4 seconds).  
OPERATION  
[*2] Fastening time includes when you pull the trigger com-  
pletely.  
CAUTION:  
Hold the tool firmly and place the socket over the bolt or  
nut. Turn the tool on and fasten for the proper fastening  
time and number of impacts (presetting number).  
If the tool is operated continuously until the battery  
cartridge has discharged, allow the tool to rest for 15  
minutes before proceeding with a fresh battery.  
001274  
The proper fastening torque may differ depending upon the  
kind or size of the bolt, the material of the workpiece to be  
fastened, etc. The relation between fastening torque and fas-  
tening time is shown in the figures.  
N·m  
(ft·lbs)  
40  
Standard  
bolt  
M10 (3/8)  
(29)  
30  
(21)  
(M10)  
M8 (5/16)  
20  
(14)  
(M8)  
(M6)  
10  
(7)  
M6 (1/4)  
NOTE:  
0
(S)  
0.5  
1.0  
50  
When fastening screw M8 (5/16) or smaller, carefully  
adjust pressure on the switch trigger so that the screw is  
not damaged.  
*1 Number of impacts  
*2 Dial setting  
25  
(13)  
*1  
(*2)  
(25)  
001275  
M10 (3/8)  
(M10)  
N·m (ft·lbs)  
Hold the tool pointed straight at the bolt or nut without  
applying excessive pressure on the tool.  
60  
High tensile  
bolt  
(43)  
50  
(36)  
M8 (5/16)  
40  
(29)  
Excessive fastening torque may damage the bolt/nut or  
socket. Before starting your job, always perform a test  
operation to determine the proper fastening time for your  
bolt or nut. Especially for the bolt smaller than M8  
(5/16), perform the above test operation to prevent the  
trouble on socket or bolt, etc.  
30  
(21)  
(M8)  
(M6)  
20  
(14)  
M6 (1/4)  
10  
(7)  
0
1.0  
2.0  
3.0  
(S)  
*1 Number of impacts  
*2 Dial setting  
50  
(25)  
100  
(50)  
150  
(75)  
*1  
(*2)  
The fastening torque is affected by a wide variety of factors  
including the following. After fastening, always check the  
torque with a torque wrench.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. When the battery cartridge is discharged almost com-  
pletely, voltage will drop and the fastening torque will be  
reduced.  
2. Socket  
Failure to use the correct size socket will cause a  
reduction in the fastening torque.  
A worn socket (wear on the hex end or square end)  
will cause a reduction in the fastening torque.  
3. Bolt  
Even though the torque coefficient and the class of  
bolt are the same, the proper fastening torque will  
differ according to the diameter of bolt.  
Even though the diameters of bolts are the same, the  
proper fastening torque will differ according to the  
torque coefficient, the class of bolt and the bolt  
length.  
4. The use of the universal joint or the extension bar some-  
what reduces the fastening force of the impact wrench.  
Compensate by fastening for a longer period of time.  
5. Type of materials to be fastened, the manner of holding  
the tool and the tool speed will affect the torque.  
MAINTENANCE  
CAUTION:  
Always be sure that the tool is switched off and the  
battery cartridge is removed before attempting to  
perform inspection or maintenance.  
001145  
Replacing carbon brushes  
Remove and check the carbon brushes regularly. Replace  
when they wear down to the limit mark. Keep the carbon  
brushes clean and free to slip in the holders. Both carbon  
brushes should be replaced at the same time. Use only iden-  
tical carbon brushes.  
1
1. Limit mark  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
001268  
Use a screwdriver to remove the brush holder caps. Take out  
the worn carbon brushes, insert the new ones and secure  
the brush holder caps.  
1
To maintain product SAFETY and RELIABILITY, repairs, any  
other maintenance or adjustment should be performed by  
Makita Authorized or Factory Service Centers, always using  
Makita replacement parts.  
2
1. Brush holder cap  
2. Screwdriver  
ACCESSORIES  
CAUTION:  
These accessories or attachments are recommended for  
use with your Makita tool specified in this manual. The  
use of any other accessories or attachments might  
present a risk of injury to persons. Only use accessory  
or attachment for its stated purpose.  
If you need any assistance for more details regarding these  
accessories, ask your local Makita service center.  
Protector(clear,red,blue)  
Automatic refreshing adapter  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Memo  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Memo  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAKITA LIMITED ONE YEAR WARRANTY  
Warranty Policy  
Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from  
workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during  
this one year period, return the COMPLETE tool, freight prepaid, to one of Makitas Factory or Authorized Service Centres.  
If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at our option, replace)  
without charge.  
This Warranty does not apply:  
where normal maintenance is required,  
repairs have been made or attempted by others,  
the tool has been abused, misused or improperly maintained,  
alterations have been made to the tool.  
IN NO EVENT SHALL MAKITA BE LIABLE FOR ANY INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES FROM  
THE SALE OR USE OF THE PRODUCT. THIS DISCLAIMER APPLIES BOTH DURING AND AFTER THE TERM OF THIS  
WARRANTY.  
The Makita Warranty is the only and the entire written warranty given by Makita for the Makita tools. No dealer or his agent  
or employee is authorized to extend or enlarge upon this warranty by any verbal or written statement or advertisement.”  
MAKITA DISCLAIMS LIABILITY FOR ANY IMPLIED WARRANTIES INCLUDING IMPLIED WARRANTIES OF  
MERCHANTABILITYAND FITNESS FOR A SPECIFIC PURPOSE,AFTER THE ONE YEAR TERM OF THIS WARRANTY.  
This Warranty gives you specific rights. The provisions contained in this warranty are not intended to limit, modify, take away  
from, disclaim or exclude any warranties set forth in any provincial legislation. To the extent required by law, the provisions in  
any provincial or federal legislation with respect to warranties take precedence over the provisions in this warranty.”  
Makita Corporation  
3-11-8, Sumiyoshi-cho,  
Anjo, Aichi 446-8502 Japan  
884399B237  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Lantronix Network Hardware 900 598 User Manual
Lenovo Laptop 10AC0011US User Manual
Link electronic Portable Generator 1199 User Manual
Magnavox CD Player AZ6834 User Manual
Manhattan Computer Products Satellite TV System ST 250 User Manual
Marshall electronic Car Video System V R171X IMD HDSDI User Manual
Maytag Microwave Oven W10315181A User Manual
Melissa Microwave Oven 653 123 User Manual
Meridian America DJ Equipment Meridian 518 User Manual
Metra Electronics Automobile Accessories 70 6522 User Manual