Magnavox Projection Television 55P916 User Manual

Projection Television

55P916

60P916

64P916

Instructions for use

Download from Www.Somanuals.com. All Manuals Search And Download.

SAFETY INSTRUCTIONS - Read before operating equipment

This product was designed and manufactured to meet strict quality and

safety standards. There are, however, some installation and operation

precautions which you should be particularly aware of.

11. Power-Cord Protection - Power supply cords should be routed so

that they are not likely to be walked on or pinched by items placed

upon or against them, paying particular attention to cords and

plugs, convenience receptacles, and the point where they exit from

the appliance.

1. Read Instructions - All the safety and operating instructions should

be read before the appliance is operated.

12. Cleaning - The appliance should be cleaned only as recommended

2. Retain Instructions - The safety and operating instructions should

by the manufacturer.

be retained for future reference.

13. Power Lines - An outdoor antenna should be located away from

3. Heed Warnings - All warnings on the appliance and in the operating

power lines.

instructions should be adhered to.

14. Outdoor Antenna Grounding - If an outside antenna is connected to

the receiver, be sure the antenna system is grounded so as to

provide some protection against voltage surges and built up static

charges.

4. Follow Instructions - All operating and use instructions should be

followed.

5. Water and Moisture - The appliance should not be used near water

- for example, near a bathtub, washbowl, kitchen sink, laundry tub,

in a wet basement or near a swimming pool, etc.

Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984,

provides information with respect to proper grounding of the mats

and supporting structure grounding of the lead-in wire to an

antenna discharge unit, size of grounding connectors, location of

antenna-discharge unit, connection to grounding electrodes and

requirements for the grounding electrode. See Fig. below.

6. Carts and Stands - The appliance should be used only with a cart or

stand that is recommended by the manufacturer.

6A.

An appliance and cart combination should be moved

with care. Quick stops, excessive force, and uneven

surfaces may cause the appliance and cart combination

to overturn.

15. Non-use Periods - The power cord of the appliance should be

unplugged from the outlet when left unused for a long period of

time.

16. Object and Liquid Entry - Care should be taken so that objects do

not fall and liquids are not spilled into the enclosure through

openings.

6B. Tilt/Stability - All televisions must comply with recommended

international global safety standards for tilt and stability properties

of its cabinet design.

•

Do not compromise these design standards by applying exces-

sive pull force to the front, or top, of the cabinet which could

ultimately overturn the product.

Also, do not endanger yourself, or children, by placing elec-

tronic equipment/toys on the top of the cabinet. Such items

could unsuspectingly fall from the top of the set and cause

product damage and/or personal injury.

17. Damage Requiring Service - The appliance should be serviced by

qualified service personnel when:

•

A. The power supply cord or the plug has been damaged; or

B. Objects have fallen, or liquid has been spilled into the

appliance; or

C. The appliance has been exposed to rain; or

D. The appliance does not appear to operate normally or exhibits

a marked change in performance; or

7. Wall or Ceiling Mounting - The appliance should be mounted to a

wall or ceiling only as recommended by the manufacturer.

E. The appliance has been dropped, or the enclosure damaged.

8. Ventilation - The appliance should be situated so that its location or

position does not interfere with its proper ventilation. For example,

the appliance should not be situated on a bed, sofa, rug, or similar

surface that may block the ventilation openings; or, placed in a

built-in installation, such as a bookcase or cabinet that may impede

the flow of air through the ventilation openings.

18. Servicing - The user should not attempt to service the appliance

beyond that described in the operating instructions. All other

servicing should be referred to qualified service personnel.

9. Heat - The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances

(including amplifiers) that produce heat.

10. Power Sources - The appliance should be connected to a power

supply only of the type described in the operating instructions or as

marked on the appliance.

Note to the CATV system installer: This reminder is provided to call the

CATV system installer's attention to Article 820-40 of the NEC that

provides guidelines for proper grounding and, in particular, specifies that

the cable ground shall be connected to the grounding system of the

building, as close to the point of cable entry as practical.

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE (NEC)

Example of Antenna Grounding

as per NEC - National Electric Code

GROUND CLAMP

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT ^{(NEC SECTION 810-20)}

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)

ELECTRIC SERVICE EQUIPMENT

Download from Www.Somanuals.com. All Manuals Search And Download.

TABLE OF CONTENTS

Remote Control Operation

Getting Started

Setting the Auto Picture Control ...........38-39

Using the Auto Sound Control....................40

Using the Auto Surf Control....................................41

Welcome/Product Registration ...................2

Safety/Precautions .....................................................3

Table of Contents.......................................................4

Features, Model and Cabinet Information .................5

Setting the TV Remote to Work Optional Accessory

Devices:

Direct Entry/Code Number Method ..............42-43

Search and Identify Method ................................44

Remote Control Direct Entry Code Lists ......45-46

On-Screen Features

PICTURE MENU

✧Adjusting Color, Brightness, Sharpness,

Using the Remote's VCR buttons ............................47

Tint, and Picture Controls...................................6

✧Using the Clearview Control...............................7

✧Adjusting the TV's Convergence Control ...........8

✧Using the Flesh Correction Control ....................9

FEATURES MENU

Picture-In-Picture (PIP)

How to Use PIP (Connections).............48-49

How to Use PIP with the TV Remote......................50

Selecting the Picture Source for PIP........................51

Adjusting Picture-in-Picture Color and Tint............52

More PIP Connections (Cable Converter)...............53

✧Selecting a Picture Source ................................10

✧Setting the TV for Closed Captioning...............11

✧Setting the TV for Cable or Antenna Signals....12

✧Adding Channels in Memory (Automatically) .13

✧Adding Channels in Memory (Manually).........14

✧Setting the TV Clock.........................................15

✧Alarm Timer......................................................16

✧Using the Sleep Timer Control .........................17

✧Adjusting the Channel Display Control............18

✧Using the Time/Channel Reminder Control......18

General Information

TV Help Menu ...........................................54

Tips if Something Isn’t Working.............................55

Glossary of TV Terms .............................................56

Index ........................................................................57

Warranty ..................................................................58

✧Using Parental Control/Content Advisory:

• Code Setup/Blocking Channels...............19-20

• Content Advisory - Movie Ratings .........21-22

• Parental Guidelines.......................................23

• Blocking Options/Review Settings...............24

SET-UP AND QUICK USE GUIDE

Use the simple Set-Up Guide (supplied with

your TV information packet) for details on:

ET-UP AND

UICK

SE UIDE

• Antenna Hook-ups

TABLE OF CONTENTS

Getting Started

•

For details on product registration, warranty,

and service refer to the other literature included

with your TV information packet.

Projection

Television and

Remote Control

Warning/Precautions..................................1

✧Using the Channel Label Control......................25

✧Using the Language Selection Control..............26

SOUND MENU

Hooking Up our TV.................................1

Please retain all these materials and keep them

handy for future reference.

How to Use the First Time Set-Up Control ..............2

Basic TV and Remote Control Operation .................3

How to Use the On-Screen Menu Controls...............4

NOTE: This owner's manual is used with several different

television models. Not all features (and drawings) dis-

cussed in this manual will necessarily match those found

with your television set. This is normal and does not

require you contacting your dealer or requesting service.

ARNING: TO PREVENT FIRE OR SHOCK

HAZARD DO NOT EXPOSE THIS UNIT TO

RAIN OR EXCESSIVE MOISTURE.

• First Time Set-Up

(Automatic Settings)

ANTENNA OR

CABLE TV

BEGIN

SMART

Connect your Antenna or

Connect the twin Output

plugs on the Signal Splitter to

the ANT

on the rear of the TV

round connector end of the RF

Coaxial Cable onto the

ANT(enna) plug and screw it

down tight (if using threaded

cables).

HELP

Remember,

be sure to set the

TV for the type sig-

nal you've connect-

ed (see "SETUP"

typical ANT(enna)

connection (using

common signal source and an

optional Signal Splitter):

Cable TV signal to the single

75 ohm input plug on the two-

way Signal Splitter (optional).

and

ANT(ENNA)

INPUTS

and ANT

inputs

our TV has two sepa-

Yrate ANT(enna)/Cable

inputs on the rear of the

set. These two signal

inputs offer convenient

hook-up options for both

normal TV program view-

ing and Picture-In-Picture

(PIP) features.

Push the

If your Antenna or Cable TV

round cable con-

Then connect two lengths of RF

Coaxial Cable to the two Output

plugs on the two-way Signal

Splitter (F-type connector on

both ends).

signal has

nector (75 ohm) on the end,

then you're ready to connect it

to the 75ohm Signal Splitter.

If your antenna has flat twin-

lead wire (300 ohm), you first

need to attach the antenna wires

on page

Guide.)

of this

Your TV can set

TOP

itself to select only

the channel numbers

on your Cable sys-

tem (see “Setup"

to the screws on 300 to 75

ohm adapter before connecting

to the 75ohm Signal Splitter.

Back of TV

The ANT(enna)

input is

Combination VHF/UHF Antenna

page 2). If you use

Cable Converter box,

set the TV to the

same channel as the

converter's CH 3/4

switch (on the rear of

the converter.)

intended for use and view-

ing on the TV’s main

300 to 75Ω Adapter

(483521827003)

screen. Your home’s pri-

mary Antenna, or Cable

TV signal, should be con-

nected to this input for

normal TV setup, use and

feature operation.

• Basic TV and Remote

Control Operation

win Lead

Wire

Outdoor or Indoor Antenna

To order any

✧Adjusting Bass, Treble, and Balance Sound

Controls.............................................................27

receives normal broadcast channels

2-13 (VHF) and 14-69 (UHF).

optional accessory

contact your dealer

or call the toll-free

accessory ordering

The ANT(enna)

second, or auxiliary sig-

nal source, designed to

input is

Round Cable

75Ω Ohm

–

SUBWOOFER

S-VIDEO

VIDEO

AUDIO

AUDIO OUT

AUX

BLE

INPUTS

A/CA

B/C

ANT

⍀

UHF/VHF

• On-Screen Menu Use

✧Setting the Bass Boost Control ........................27

✧Setting the TV for Stereo and SAP Programs ..28

✧Using the Incredible Stereo Control .................29

✧Using the Volume Display Control...................30

NOTE: This owner's manual is used with several

different television models. Not all features (and

drawings) discussed in this manual will necessarily

match those found with your television set. This is

normal and does not require you contacting your dealer

or requesting service.

✧Using the TV Speaker On/Off Control with

the Audio Output jacks .....................................31

✧Surround Sound Speaker Connections and

Variable Audio Output Control ........................32

Because of continuous product improvements, the

information mentioned in the documents accompanying

your product are subject to change without notice.

✧Using the TV's Audio/Video Input and

Output Jacks ...............................................33-37

Download from Www.Somanuals.com. All Manuals Search And Download.

FEATURES

Digital Ready - Projection Television capable of

connecting to both the current analog television

signals of today as well as interfacing with new

upcoming digital source playback products and

First Time Set Up - automatically sets the TV for

local channels, the correct picture signal (antenna or

cable), and assists in the setting of TV’s Guide Plus+

feature.

devices. This TV includes multiple signal connectors

(Component Video, S-Video, Composite Video)

which give you a variety of equipment playback

options for digital set top boxes, satellite receivers,

cable boxes, and other digital devices.

Infrared Remote Control - operates your TV set and

a variety of wireless remote control VCRs, Cable TV

Converters, and other accessory equipment.

Standard TV broadcast (VHF/UHF) or Cable TV

(CATV) channel capability.

While there may exist some digital devices with

connections not available on this television, you

should be adequately prepared for the vast majority of

products coming onto the digital consumer

electronics’ market. Note: You should always use the

connection output on digital devices that gives the

highest level of picture quality possible. As listed

above the Component Video (or Y P^BPR) input

delivers the best color and picture reproduction;

followed by S-Video; and then Composite Video. In

addition to the above listed inputs, your television also

includes the standard 75ohm cable signal connector

for use with antennas or analog cable boxes.

Closed Captioning - allows the viewer to read TV

program dialogue or voice conversations as on-screen

text.

Automatic Programming of channels - for quick and

easy selection of favorite stations available in your

area.

Picture-In-Picture (PIP) - can show a TV program

and the direct video output from an accessory (VCR,

etc.) onto the TV screen at the same time.

Parental Control for “Censoring” - this feature can

block out channels to keep children from watching

undesirable programming. Parental Guideline and

Movie Rating settings can also be used as part of the

new Content Advisory Data system available with TV

programming.

As you unpack your TV please note that the

following items have been included with your set:

•

Owner's Manual

Stereo-TV - with a built-in audio amplifier and a twin

speaker system, reception of TV programs in both

broadcast stereo sound or (SAP) bilingual broadcast

are available.

Safety Tip Information

Factory Service Center Locations

•

Warranty Registration Card

Remote Control Transmitter

Batteries for Remote Control Use

Twin Antenna (A/B) Inputs - for easy displaying of

two separate signal sources on the TV. An A/B button

on the remote control switches the TV’s Main screen

between the two Antenna (A & B) Input options.

Please take a few minutes to complete your

registration card. The serial number for the TV is

on the back of the set.

Audio/Video Jacks - for direct connections with

VCRs (and other accessories) for quality TV picture

and sound playback.Component Video Input

connectors are also available for high fidelity color

and picture resolution when using digital video source

material, such as DVD.

Refer to the back of this manual for instructions

on the cleaning and care of the TV.

End-of-Life disposal

Surround Sound - this TV set contains external;

audio speaker connections for a more dynamic sound

effect.

Your new projection television and its packaging

contain materials that can be recycled and reused.

Specialized companies can recycle your product

to increase the amount of reusable materials and

minimize the amounts which need to be properly

disposed.

Sleep-Timer - automatically turns the TV OFF at

preset time intervals.

Auto Button - for the control of TV Sound and the

Picture levels. Use the Auto Button on the remote to

quickly adjust Auto Sound (to select various audio

modes matched to specific types of TV programming);

Auto Picture (for programmed video level adjustments

on a variety of program sources); and Auto Surf (for

quick one button channel selection of up to 10 of your

favorite channels).

Your product also uses batteries which should not

be thrown away when depleted, but should be

handed in and disposed of as small chemical

waste.

Please find out about the local regulations on how

to dispose of your old television, batteries, and

packaging materials whenever you replace

existing equipment.

Download from Www.Somanuals.com. All Manuals Search And Download.

PICTURE MENU CONTROL ADJUSTMENTS

COLOR, BRIGHTNESS,

SHARPNESS, TINT, PICTURE

o adjust your TV color and

Tpicture controls, select a TV

channel and follow the steps shown

below:

BEGIN

MAIN MENU

PICTURE

Select BRIGHTNESS,

PICTURE, COLOR, TINT, or

SHARPNESS picture control.

SOUND

HELP

FEATURES

PICTURE MENU

COLOR

With the PICTURE MENU on

screen, move the RED highlight

with the outer MENU ring

buttons. Then press the center

MENU button to select the feature.

EXIT

1 ST TIME SETUP

TINT

BRIGHT

SHARP

EXIT

PICTURE

CLEARVIEW

MORE...

POWER

OF 2

INFO

GUIDE

Press the outer MENU ring

buttons to adjust the selected

control.

ACC

VCR

PIP CH

SWAP

SOURCE FREEZE

AUTO

SLEEP

Press the STATUS button to

clear the screen.

MENU/

SELECT

STATUS/

EXIT

STOP

COLOR

HELP

VOL

MIN

MAX

MUTE

SMART HELP

EXIT

NEXT...

Remember. When the bar

scale is centered, control

settings are at normal mid-range

levels.

Select and then press

MENU (M) button to

view an explanation of

the selected feature.

Select and then press MENU

(M) button to view additional

controls grouped under same

feature heading. For

Example: Tint, Brightness,

Picture, etc.

100+

SURF

POSITION

PIP

BRIGHTNESS Press (-) or (+) until

dark parts of the picture show good

detail.

PICTURE Press (-) or (+) until

whitest parts of the picture are as

bright as you prefer.

COLOR Press (-) or (+) to add or

eliminate color.

TINT Press (-) or (+) to obtain

natural skin tones. (Also see Flesh

Correction on page 9 for more

information).

SHARPNESS Press (-) or (+) to

improve detail in the picture.

Download from Www.Somanuals.com. All Manuals Search And Download.

PICTURE MENU CONTROLS (CONTINUED)

CLEARVIEW

learview is a sharpness feature

Cwhich smoothes out

background snow (or picture noise)

without losing picture image detail

or crispness.

BEGIN

MAIN MENU

PICTURE

SOUND

HELP

Select CLEARVIEW control.

With the PICTURE MENU on

screen, move the RED highlight

with the outer MENU ring

FEATURES

PICTURE MENU

COLOR

1 ST TIME SETUP

EXIT

TINT

BRIGHT

SHARP

EXIT

PICTURE

buttons. Then press the center

MENU button to select the feature.

CLEARVIEW

MORE...

Press the outer MENU ring

buttons to move the RED highlight.

Press the center MENU button to

select (

) the ENHANCED mode.

POWER

OF 2

INFO

GUIDE

ACC

VCR

PIP CH

DN UP

SWAP

SOURCE FREEZE

Press the STATUS button to

clear the screen.

AUTO

SLEEP

CLEARVIEW

NORMAL

MENU/

SELECT

STATUS/

EXIT

STOP

ENHANCED

HELP

VOL

MUTE

EXIT

NEXT...

100+

SURF

POSITION

PIP

Download from Www.Somanuals.com. All Manuals Search And Download.

PICTURE MENU CONTROLS (CONTINUED)

RED/BLUE CONVERGENCE

onvergence is the correct

Clining up of the red and blue

light paths on the TV screen.

NOTE: If no color fringing (see

Smart Help) shows, then no

Convergence adjustments are

necessary for your TV.

MAIN MENU

PICTURE

SOUND

HELP

PICTURE MENU

COLOR

FEATURES

TINT

1 ST TIME SETUP

EXIT

BEGIN

BRIGHT

SHARP

EXIT

PICTURE

Select CONVERGENCE

CLEARVIEW

MORE...

control.

POWER

With PICTURE MENU (2 of 2) on

screen, move the RED highlight

with the outer MENU ring

OF 2

INFO

GUIDE

buttons. Then press the center

MENU button to select the feature.

ACC

VCR

SWAP

PIP CH

SOURCE FREEZE

AUTO

SLEEP

PICTURE MENU

If there is RED or BLUE color

fringing on the White cross, press

the center MENU button to

continue.

CONVERGENCE

MENU/

SELECT

STATUS/

EXIT

FLESH CORRECTION

VOL

MUTE

MORE...

OF 2

EXIT

Press the MENU ring

buttons to move the red or blue

cross directly over the white cross

on the TV screen.

If there is RED or BLUE

fringe on the W HITE cross,

use this adjustment to

improve the picture.

100+

The red or blue cross is properly

adjusted when it is completely

merged with the white cross. (No

color appears around the edge of

the white cross).

SURF

POSITION

PIP

Press the STATUS button to

clear the screen when convergence

adjustments are complete.

Press "M" to Continue

- or -

Press " " to Return

STOP

SMART HELP

Remember. Convergence

has been set at the factory for

best viewing, but if one or more of

the (red or blue) colors appear

around the edges of objects (color

fringing) follow the steps given in

this section.

Us e the

RED fringe into the W HITE

cros s . Pres s "M" to Continue.

keys to m erge the

NOTE: Adjustments for “Multi-Point” on-

screen color fringing can also be made as part

of the TV’s Convergence control system.

Follow the TV’s on-screen menu directions to

select individual screen areas that can be

readjusted and set for varying red/blue color

fringing conditions. These multi-point settings

can then be “Saved” to memory for the

specific areas of the TV screen (or Factory

Settings for convergence can be recalled and

put back into place for use).

MULTI-POINT CONVERGENCE

Use the

keys to adjust

Press "M" to Save

Press " " to Undo

Press "M" to Adjust or

Press "STATUS" to Continue

Press

" " to

recall Factory Settings

Download from Www.Somanuals.com. All Manuals Search And Download.

PICTURE MENU CONTROLS (CONTINUED)

FLESH CORRECTION

se the Flesh Correction

Ucontrol to keep skin tone hues

(or facial tint) from varying from

TV channel to TV channel.

BEGIN

Select FLESH

CORRECTION control.

MAIN MENU

PICTURE

SOUND

HELP

With PICTURE MENU (2 of 2) on

screen, move the RED highlight

with the outer MENU ring

PICTURE MENU

COLOR

FEATURES

TINT

1 ST TIME SETUP

EXIT

BRIGHT

SHARP

EXIT

PICTURE

buttons. Then press the center

MENU button to select the feature.

CLEARVIEW

MORE...

Press the MENU ring

POWER

buttons to move the RED

OF 2

INFO

GUIDE

highlight. Press the center MENU

button to turn (

) the FLESH

CORRECTION control ON.

ACC

VCR

PIP CH

SWAP

SOURCE FREEZE

PICTURE MENU

AUTO

SLEEP

Press the STATUS button to

clear the screen.

CONVERGENCE

MENU/

SELECT

STATUS/

EXIT

FLESH CORRECTION

STOP

VOL

MORE...

OF 2

EXIT

MUTE

100+

SURF

POSITION

PIP

FLESH CORRECTION

OFF

EXIT

HELP

Download from Www.Somanuals.com. All Manuals Search And Download.

FEATURE MENU CONTROL ADJUSTMENTS

PICTURE SOURCE

he picture for the TV can come

Tthrough either the ANTENNA

plug or the AUDIO/VIDEO INput

jacks (on the rear of the TV). The

Picture Source control simply tells

the TV which one of these picture

sources it is to show on the TV

screen.

MAIN MENU

PICTURE

BEGIN

SOUND

HELP

Select PICTURE SOURCE

FEATURE MENU

PICTURE

SELECT control.

FEATURES

With the FEATURES MENU on

screen, move the RED highlight

with the outer MENU ring

CABLE

TUNING

1 ST TIME SETUP

EXIT

SOURCE

CLOSED

CHANNEL

MEMORY

buttons. Then press the center

MENU button to select the feature.

CAPTIONS

POWER

MORE...

OF 5

EXIT

Press the MENU ring

buttons to move the RED

highlight. Press the center MENU

button to turn the desired

PICTURE SOURCE control ON

(

INFO

GUIDE

ACC

VCR

PIP CH

SWAP

SOURCE FREEZE

PICTURE SOURCE SELECT

AUTO

SLEEP

ANT A

ANT B

AUX 1 VIDEO

AUX 1 Y P

AUX 2 VIDEO

SIDE VIDEO

ANT A or B- for a picture signal

coming from either the ANT(enna)

A or B Input plugs on the TV.

MENU/

SELECT

STATUS/

EXIT

AUX 1 (or 2) VIDEO- for a

picture signal coming from the

AUX 1 (or 2) Video Input jacks on

the rear of the TV.

VOL

MUTE

EXIT

HELP

AUX 1 Y PB PR- for picture

signals coming from the AUX 1

component (Y P^BPR) luminance

and color input jacks on the rear of

the TV.

Note: A “S-VIDEO 1 (or 2)” Input

control will appear as a PICTURE

SOURCE SELECT(ion) in place of

the AUX 1 (or 2) VIDEO position

when the S-VIDEO plugs (on the rear

of the TV) are connected. See page 35

for operating details on S-VIDEO.

100+

SURF

POSITION

PIP

SIDE VIDEO- for a picture signal

coming from the Video Input jack

on the right side panel of the TV.

Press the STATUS button to

clear the screen.

STOP

SMART HELP

Remember, the Auxiliary

Input modes (AUX 1 VIDEO,

AUX 1 Y PB PR, etc.) must have a

compatible video signal source

properly connected (to the INPUT

plug on the rear of the TV), or the

TV screen will be blank.

Download from Www.Somanuals.com. All Manuals Search And Download.

FEATURE MENU CONTROLS (CONTINUED)

CLOSED CAPTION

losed Captioning (CC) allows

Cyou to read the voice content of

television programs on the TV

screen. Designed to help the hearing

impaired this feature uses on-screen

"text boxes" to show dialogue and

conversations while the TV program

is in progress.

NOTE: Not all TV programs and product commercials are made for broadcast

with Closed Caption (CC) information included. Neither are all Closed Caption

modes (CAPTION 1-4; or TEXT 1-4) necessarily being used by a broadcast station

during the transmission of a closed caption program. Usually "CAPTION 1" is the

most used mode to view captioned material. Refer to your area's TV program

listings for the stations and times of Closed Caption shows.

BEGIN

Select CLOSED

CAPTIONING control.

With the FEATURES MENU on

screen, move the RED highlight

with the outer MENU ring

buttons. Then press the center

MENU button to select the feature.

FEATURE MENU

MAIN MENU

PICTURE

SOURCE

CABLE

TUNING

PICTURE

SOUND

HELP

CLOSED

CAPTIONS

CHANNEL

MEMORY

FEATURES

Press the MENU ring

buttons to move the RED highlight.

Press the center MENU button to

select (

) the desired Closed

Caption mode - For Example:

"ALWAYS ON" and "CAPTION

1".

1 ST TIME SETUP

EXIT

MORE...

OF 5

EXIT

NOTE: The ON DURING

MUTE ONLY control can be

used to set the TV to turn the

Closed Caption mode "ON"

whenever the MUTE button

on the remote is pressed.

POWER

INFO

GUIDE

CLOSED CAPTION

CAPTION 1, 2, 3, 4:

ALW AYS ON

ALW AYS OFF

ON DURING MUTE ONLY

dialogue (and descriptions)

for the action on the captioned

TV program shows on-screen.

(See Important Note on this

page.)

ACC

VCR

SWAP

PIP CH

SOURCE FREEZE

CAPTION 1

CAPTION 2

CAPTION 3

CAPTION 4

TEXT 1

TEXT 2

TEXT 3

TEXT 4

AUTO

SLEEP

MENU/

SELECT

STATUS/

EXIT

HELP

TEXT 1, 2, 3, 4:

often used for channel guide,

schedules, or bulletin board

information for CC programs.

VOL

MUTE

After making your Caption mode

selection, press the STATUS button

to clear the TV screen. The selected

Closed Caption mode will be active.

100+

SURF

POSITION

PIP

To cancel, set the Closed Captioned

JOHN: Why did they move the

meeting up to this week?

MARSHA: I don't know, but they

are pushing to close the deal.

feature to OFF when finished.

CAPTION 1 mode

Example Screen Display

STOP

CLOSE CAPTION PROGRAMS ON WXYZ

SMART HELP

ALL ITEMS ARE EASTERN STANDARD TIME (EST)

CHECK LOCAL LISTINGS

FOR TIMES IN YOUR AREA

Remember. Broadcast

stations will often use

6:00 TOP OF THE MORNING

10:00 THE BEST LITTLE CALL-IN SHOW EVER

12:00 NOONDAY NEWS

Closed Caption information will usually appear

in black and white (although some broadcasters

or networks may occasionally use color to

highlight or draw attention to certain areas.)

spelling abbreviations, symbols,

dropouts and other grammatical

shortcuts in order to keep pace

with the on-screen action. These

type factors vary upon the source

of the captioned text material and

do not indicate a need for service

on the part of the TV.

1:30 AS YOUR LIFE TURNS MY WORLD AROUND

6:00 WORLD NEWS FOR TODAY

9:00 PLAYHOUSE MOVIE OF THE WEEK

FULL SCREEN TEXT

will block TV screen from viewing

Download from Www.Somanuals.com. All Manuals Search And Download.

FEATURE MENU CONTROLS (CONTINUED)

CABLE TUNING

ou need to make sure the TV is

Yset to pick up either Cable TV

or Antenna signals. In other words,

the TV needs to know if you

connected a Cable TV signal or a

normal antenna to its ANTENNA

plug.

MAIN MENU

PICTURE

SOUND

HELP

NOTE: If you went through First

Time Setup (in your Quick Use

Guide), this task has already been

completed for you.

FEATURES

1 ST TIME SETUP

EXIT

FEATURE MENU

PICTURE

CABLE

TUNING

BEGIN

Select CABLE CHANNEL

TUNING control.

SOURCE

CLOSED

CAPTIONS

CHANNEL

MEMORY

POWER

INFO

GUIDE

With the FEATURES MENU on

screen, move the RED highlight

with the outer MENU ring

buttons. Then press the center

MENU button to select the feature.

MORE...

OF 5

EXIT

ACC

VCR

PIP CH

SWAP

SOURCE FREEZE

AUTO

SLEEP

Press the MENU ring

MENU/

SELECT

STATUS/

EXIT

buttons to move the RED

CABLE TUNING

highlight. Press the center MENU

button to select (

) the desired

mode - For Example: CABLE.

CABLE ANT A

VOL

NORMAL ANT A

CABLE ANT B

MUTE

NORMAL ANT B

CABLE-

If you DO have

Cable TV connected

to the TV. Channels

1-125 available.

EXIT

HELP

100+

SURF

Note: Both ANT(enna) A and ANT B inputs

on the rear of the TV can be set for the correct

connected signal (either an Antenna or Cable

TV source).

POSITION

PIP

NORMAL- If you have an

Antenna connected

to the TV. Channels

2-69 available.

Press the STATUS button to

clear the screen.

STOP

Download from Www.Somanuals.com. All Manuals Search And Download.

FEATURE MENU CONTROLS (CONTINUED)

CHANNEL MEMORY

AUTO-PROGRAMMING

our TV can automatically set itself

Yfor local area (or Cable TV)

channels. This makes it easy for you

to select only the TV stations in your

area when the CHANNEL ▲▼

buttons are pressed.

MAIN MENU

PICTURE

SOUND

HELP

NOTE: If you went through First

Time Setup (in your Quick Use

Guide), this task has already been

completed for you.

FEATURES

FEATURE MENU

PICTURE

CABLE

1 ST TIME SETUP

EXIT

SOURCE

TUNING

BEGIN

CLOSED

CAPTIONS

CHANNEL

MEMORY

Select CHANNEL MEMORY

(START AUTO-PROGRAMMING)

control.

POWER

MORE...

OF 5

EXIT

INFO

GUIDE

With the FEATURES MENU on

screen, move the RED highlight with

ACC

VCR

PIP CH

SWAP

SOURCE FREEZE

the outer MENU ring

buttons.

AUTO

SLEEP

Then press the center MENU button

to select the feature.

CHANNEL MEMORY

MENU/

SELECT

STATUS/

EXIT

ADD/ DELETE

CHANNELS

Press the center MENU button to

turn AUTO-PROGRAMMING ON .

START

AUTO-PROGRAMMING

VOL

The TV shows which channel

numbers are "SAVED" (

) as they

are added into memory.

MUTE

EXIT

HELP

"Auto-programming CHANNEL

MEMORY is finished" shows when

the TV is through adding channels.

100+

SURF

AUTO-PROGRAMMING CHANNEL

MEMORY FOR ANT A

POSITION

PIP

Press the STATUS or Menu

button to clear the screen.

1 O

1 1

1 2

1 3

1 7

2 1

1 4

1 8

2 2

1 5

1 9

2 3

1 6

2 0

2 4

Channel Numbers are

Saved in Memory

STOP

Pres s "M" to

Stop Auto-Program

SMART HELP

Try it out. Press the

CHANNEL▲▼ buttons

and see which channels you can

select.

Remember, an Antenna or Cable

TV signal must first be connected

to your TV so that channels can be

saved.

If you want to delete any

unwanted channels from the TV's

memory, see "ADD/DELETE

CHANNELS" on the next page.

Download from Www.Somanuals.com. All Manuals Search And Download.

FEATURE MENU CONTROLS (CONTINUED)

ADD/DELETE CHANNELS

uto-Programming (see

Aprevious page) adds all the

channels it can find (on your

Antenna or Cable TV system) into

the TV's memory. Add/Delete

Channels makes it easy for you to

add other channels, or drop

unwanted channels, from the list of

channels in the TV's memory.

MAIN MENU

PICTURE

BEGIN

SOUND

HELP

Select CHANNEL MEMORY

(ADD/DELETE CHANNELS)

control.

FEATURES

FEATURE MENU

PICTURE

CABLE

TUNING

1 ST TIME SETUP

EXIT

With the FEATURES MENU on

screen, move the RED highlight

with the outer MENU ring

buttons. Then press the center

MENU button to select the feature.

SOURCE

CLOSED

CAPTIONS

CHANNEL

MEMORY

POWER

MORE...

OF 5

EXIT

INFO

GUIDE

Press the CHANNEL ▲▼ or

number buttons to select the

channel you want to add or delete.

ACC

VCR

PIP CH

SWAP

SOURCE FREEZE

AUTO

SLEEP

Press the outer MENU

ring button (on the Right) to

ADD the channel into the TV's

memory.

CHANNEL MEMORY

MENU/

SELECT

STATUS/

EXIT

ADD/ DELETE

CHANNELS

START

AUTO-PROGRAMMING

VOL

Press the outer MENU ring button

(on the Left) to DELETE the

channel from memory.

MUTE

EXIT

HELP

Repeat steps 2 and 3 for each

channel you wish to add or delete.

100+

SURF

Press the STATUS or MENU

button to clear the screen when

POSITION

PIP

ADD/ DELETE CHANNEL

through.

Channel 1 9 Added

for ANT A

STOP

SELECT CHANNEL

to DELETE CHANNEL

for ANT B

SMART HELP

when FINISHED

Remember. You can also

add the Auxiliary modes

NOTE: A separate ADD/DELETE CHANNEL memory

may also be created for the ANT(enna) B Input on the

rear of the set (if an Antenna or Cable TV signal has been

connected). Press the “AV” button on the remote, while

in the ADD/DELETE CHANNEL mode, to switch

between the ANT A and ANT B channel memory lists.

Then follow steps 2 and 3 as shown to the left to add or

delete the desired channels.

(AUX 1 VIDEO, AUX 1 Y PB PR,

etc.) just like a channel. Then by

pressing the CHANNEL ▲▼

buttons the AUX(iliary) mode can

quickly be selected to use the

desired set of Input jacks (see

page 33).

Note: AUX(iliary) VIDEO modes

are located between the lowest

and highest channel numbers

within the ADD/DELETE

CHANNEL control screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

FEATURE MENU CONTROLS (CONTINUED)

SET CLOCK

our TV comes with an on-

Yscreen clock. During normal

operation the clock appears on the

screen with every channel change

(and when the STATUS button is

pressed).

BEGIN

FEATURE MENU

PICTURE

Select SET CLOCK control.

MAIN MENU

PICTURE

CABLE

TUNING

With the FEATURES MENU (2 of

5) on screen, move the RED

highlight with the outer MENU

ring buttons. Then press the center

MENU button to select the feature.

SOURCE

SOUND

HELP

CLOSED

CAPTIONS

CHANNEL

MEMORY

FEATURES

1 ST TIME SETUP

EXIT

MORE...

OF 5

EXIT

Press the remote's number

buttons to set the time clock.

POWER

FEATURE MENU

Press the STATUS button to

set the clock in operation and clear

the screen.

SET CLOCK &

ALARM TIMER

SLEEP

TIMER

INFO

GUIDE

HALF HOUR

REMINDER

CHANNEL

DISPLAY

ACC

VCR

PIP CH

SWAP

SOURCE FREEZE

STOP

MORE...

OF 5

EXIT

AUTO

SLEEP

MENU/

SELECT

STATUS/

EXIT

SMART HELP

Remember, be sure to

press "0" first and then the

hour number for single digit

entries.

SET CLOCK/ ALARM TIMER

SET CLOCK

VOL

MUTE

SET ALARM TIMER

EXIT

The remote's MENU ring

buttons can also be used to set the

hours, minutes and AM/PM

portions of the clock.

100+

SURF

POSITION

PIP

TV Clock settings may be lost

when the TV is unplugged (or AC

power to the set is interrupted).

SET CLOCK

: 1 9 AM

PLEASE ENTER THE

CURRENT HOUR

Download from Www.Somanuals.com. All Manuals Search And Download.

FEATURE MENU CONTROLS (CONTINUED)

SET ALARM TIMER

ust like an alarm clock you can

Jset the TV to turn itself on at the

same time everyday.

BEGIN

FEATURE MENU

PICTURE

MAIN MENU

PICTURE

Select SET ALARM TIMER

control.

CABLE

TUNING

SOURCE

SOUND

HELP

CLOSED

CAPTIONS

CHANNEL

MEMORY

FEATURES

With the FEATURES MENU (2 of

5) on screen, move the RED

highlight with the outer MENU

ring buttons. Then press the center

MENU button to select the feature.

EXIT

1 ST TIME SETUP

MORE...

OF 5

EXIT

Press the outer MENU ring

and center MENU buttons to

highlight and select "ON" (

POWER

INFO

GUIDE

FEATURE MENU

SET CLOCK &

ALARM TIMER

SLEEP

TIMER

ACC

VCR

Press the outer MENU ring

and center MENU buttons to

select "SET ALARM TIME".

SWAP

PIP CH

SOURCE FREEZE

HALF HOUR

REMINDER

CHANNEL

DISPLAY

AUTO

SLEEP

MORE...

OF 5

EXIT

MENU/

SELECT

STATUS/

EXIT

Press the remote's number

buttons to set the "TURN ON"

time for the TV. (Press the MENU

ring buttons for the AM or PM

settings.)

VOL

MUTE

SET CLOCK/ ALARM TIMER

SET CLOCK

Press the STATUS button to

set the "ALARM TIME" and clear

the screen.

100+

SURF

SET ALARM TIMER

EXIT

POSITION

PIP

STOP

SET ALARM TIMER

OFF

SET ALARM TIME

EXIT

HELP

SET ALARM TIME

: 3 0 AM

PLEASE ENTER THE

HOUR TO TURN ON

Download from Www.Somanuals.com. All Manuals Search And Download.

FEATURE MENU CONTROLS (CONTINUED)

SLEEP TIMER

ave you ever fallen asleep in

Hfront of the TV only to have it

wake you up at two in the morning

with a test pattern screeching in

your ears? Well, your TV can save

you all that trouble by

FEATURE MENU

PICTURE

automatically turning itself off.

BEGIN

MAIN MENU

PICTURE

CABLE

SOURCE

TUNING

SOUND

HELP

Press the SLEEP button on the

remote control.

CLOSED

CAPTIONS

CHANNEL

MEMORY

FEATURES

Note: you can also select the

EXIT

1 ST TIME SETUP

MORE...

OF 5

EXIT

SLEEP control with the TV’s on-

screen FEATURES MENU (2 of 5).

Move the RED highlight with the

POWER

outer MENU ring

buttons.

Then press the center MENU button

to select the feature.

INFO

GUIDE

FEATURE MENU

ACC

VCR

PIP CH

SET CLOCK &

ALARM TIMER

SLEEP

TIMER

Press the SLEEP button

SWAP

SOURCE FREEZE

repeatedly to pick the amount of

time (15 minutes to 2 hours ahead)

before the TV will turn itself off.

AUTO

SLEEP

HALF HOUR

REMINDER

CHANNEL

DISPLAY

MENU/

SELECT

STATUS/

EXIT

MORE...

OF 5

EXIT

The Menu ring buttons can also be

used to set the amount of time.

VOL

MUTE

Press the STATUS or MENU

button to clear the screen after you

have set the time for the TV to turn

off.

SET SLEEP TIMER

: 1 5

STOP

100+

SURF

POSITION

PIP

SMART HELP

to CHANGE

when FINISHED

Remember, to see how

many minutes are left before

the TV shuts itself off, reselect the

SLEEP TIMER control screen.

To stop a SLEEP TIMER setting,

reset the timer back to OFF.

(Turning the TV off and on, or

pressing a button during the last

minute of a timer setting, will also

cancel a setting.)

A few seconds before the TV is to

shut off a message will come on the

screen telling you GOOD NIGHT.

Download from Www.Somanuals.com. All Manuals Search And Download.

FEATURE MENU CONTROLS (CONTINUED)

CHANNEL DISPLAY

SMART

HELP

ith the Channel Display

Wcontrol you can change the

size and location of the on screen

channel and clock information.

BEGIN

Try it out.

Press the

FEATURE MENU

PICTURE

MAIN MENU

PICTURE

CABLE

TUNING

SOURCE

CHANNEL ▲▼

buttons and you

should see the

Display Size you

selected.

SOUND

HELP

CLOSED

CAPTION

CHANNEL

MEMORY

FEATURES

Select CHANNEL DISPLAY

control.

EXIT

1 ST TIME SETUP

MORE...

OF 5

EXIT

With the FEATURES MENU (2

of 5) on screen, move the RED

highlight with the outer MENU

ring buttons. Then press the center

MENU button to select the

feature.

Remember. The

SMALL SIZE

display shows only

the channel number,

not the time (or

clock).

POWER

INFO

GUIDE

FEATURE MENU

ACC

VCR

PIP CH

SLEEP

TIMER

SET CLOCK &

ALARM TIMER

SWAP

SOURCE FREEZE

AUTO

SLEEP

HALF HOUR

REMINDER

CHANNEL

DISPLAY

Press the MENU ring and

center MENU buttons to

highlight and select (

) the

LARGE or SMALL display

control.

MENU/

STATUS/

EXIT

SELECT

MORE...

OF 5

EXIT

VOL

MUTE

Press the STATUS button to

clear the screen.

CHANNEL DISPLAY

LARGE

100+

SURF

POSITION

PIP

STOP

SMALL - Channel/ Label

EXIT

HELP

SMART

HELP

HALF HOUR REMINDER

ith the Half Hour Reminder

Wcontrol the TV automatically

shows you the current time and

channel every thirty minutes.

Remember.

MAIN MENU

PICTURE

The Time and

Channel Reminders

will show on the

hour and the half-

hour for about five

seconds.

FEATURE MENU

SOUND

HELP

PICTURE

SOURCE

CABLE

TUNING

FEATURES

BEGIN

CLOSED

CAPTIONS

CHANNEL

MEMORY

EXIT

1 ST TIME SETUP

Select HALF HOUR

REMINDER control.

MORE...

OF 5

EXIT

With the FEATURES MENU (2

of 5) on screen, move the RED

highlight with the outer MENU

ring buttons. Then press the center

MENU button to select the

feature.

POWER

INFO

GUIDE

FEATURE MENU

ACC

VCR

PIP CH

SWAP

SOURCE FREEZE

SET CLOCK &

ALARM TIMER

SLEEP

TIMER

AUTO

SLEEP

HALF HOUR

REMINDER

CHANNEL

DISPLAY

MENU/

SELECT

STATUS/

EXIT

Press the MENU ring and

center MENU buttons to

highlight and select (

) the

EVERY HALF HOUR item.

MORE...

OF 5

EXIT

VOL

MUTE

Press the STATUS button to

clear the screen.

HALF HOUR REMINDER

OFF

100+

SURF

POSITION

PIP

STOP

EVERY HALF HOUR

EXIT

HELP

Download from Www.Somanuals.com. All Manuals Search And Download.

FEATURE MENU CONTROLS (CONTINUED)

PARENTAL CONTROL

NOTE:Your TV left the factory with the Parental Code set to "0000". If you are using

your TV and the Parental Control for the first time, and don't want to SETUP a new

Access code number, you can use the "0000" number to block channels - see next page.

The "0711" Parental Code (shown on this page) is given as a default or way to reset the

Code when the current Access number is not known.

SETUP CODE NUMBER

arental Control allows parents

Pto block out, or "censor", any

channels they think children should

not watch. A channel placed under

Parental Control cannot be viewed

until a correct access code is used to

unlock the channel for viewing.

FEATURE MENU

PICTURE

FEATURE MENU

First let's set your Parental Code:

BEGIN

SET CLOCK &

ALARM TIMER

CABLE

TUNING

SLEEP

TIMER

MAIN MENU

PICTURE

SOURCE

SOUND

HELP

Select the PARENTAL

CONTROL.

CLOSED

CAPTIONS

HALF HOUR

REMINDER

CHANNEL

MEMORY

CHANNEL

DISPLAY

FEATURES

MORE...

OF 5

MORE...

OF 5

EXIT

With the FEATURES MENU (3 of

5) on screen, move the RED

EXIT

1 ST TIME SETUP

highlight with the outer MENU

ring buttons. Then press the center

MENU button to select the feature.

POWER

PARENTAL CONTROL

INFO

GUIDE

FEATURE MENU

"CHANNEL BLOCKING" and

"SETUP CODE" show on screen.

SETUP

CODE

CONTENT

ADVISORY

CHANNEL

LABELS

PARENTAL

CONTROL

ACC

VCR

PIP CH

DN UP

SWAP

SOURCE FREEZE

CHANNEL

BLOCKING

LANGUAGE

SELECTION

Press the MENU ring and center

MENU buttons to highlight and

select the SETUP CODE item.

AUTO

SLEEP

EXIT

MORE...

EXIT

HELP

MENU/

SELECT

STATUS/

EXIT

OF 5

Press 0, 7, 1, 1 on the remote.

VOL

MUTE

"XXXX" shows on the ACCESS

CODE SETUP screen as you press

the number buttons.

ACCESS CODE SETUP

"INCORRECT ACCESS CODE -

TRY AGAIN" will also show on the

screen.

INCORRECT ACCESS CODE

100+

SURF

Firs t Enter Your

Current Acces s Code.

TRY AGAIN. If You've

Forgotten Your Acces s

Code go to SETUP CODE

and s ee Owner's Manual.

POSITION

PIP

to EXIT

Press 0, 7, 1, 1 on the remote

again.

"Next Enter Your New Access

Code" shows on the screen.

Enter a new four digit number

code using the remote.

ACCESS CODE SETUP

"Access Code Changed" shows on

the screen to let you know the new

code has been set.

Acces s Code Changed.

for CHANNEL BLOCKING

Next Enter Your New

Acces s Code.

for CONTENT ADVISORY

to EXIT

Continue to the next page to find

out how to "BLOCK" channels from

viewing.

• Press outer MENU ring button (on

the Right) to go on and start to

"block" channels.

• Press outer MENU ring button (on

the Left) to go to "Content Advisory"

(or TV and Movie Ratings system of

channel blocking).

SMART HELP

• Press the center MENU button to

return to the Parental Control Menu

screen.

Parents - it isn't possible

to unlock or defeat your

Censor Code without changing to

a new code number. So if your

Code number changes, and you

didn't change it yourself, then you

will know that someone has

• Press STATUS to clear the screen.

altered the code and the blanked

out channel has been viewed.

Download from Www.Somanuals.com. All Manuals Search And Download.

FEATURE MENU CONTROLS (CONTINUED)

PARENTAL CONTROL

CHANNEL BLOCKING

fter your personal Parental

ACode number has been set (see

previous page), you are now ready

to select the channels you want to

block out or censor.

BEGIN

Select the BLOCK

CHANNELS control.

FEATURE MENU

PICTURE

FEATURE MENU

SET CLOCK &

ALARM TIMER

CABLE

TUNING

SLEEP

TIMER

MAIN MENU

PICTURE

SOURCE

With the FEATURES MENU (3 of

5) on screen, move the RED

highlight with the outer MENU

ring buttons. Then press the center

MENU button to select the feature.

SOUND

HELP

HALF HOUR

REMINDER

CLOSED

CAPTIONS

CHANNEL

MEMORY

CHANNEL

DISPLAY

FEATURES

MORE...

OF 5

MORE...

OF 5

EXIT

1 ST TIME SETUP

Press the MENU ring and

center MENU buttons to highlight

and select the CHANNEL

BLOCKING item.

POWER

PARENTAL CONTROL

INFO

GUIDE

FEATURE MENU

SETUP

CODE

CONTENT

ADVISORY

CHANNEL

LABELS

PARENTAL

CONTROL

ACC

SOURCE FREEZE

VCR

PIP CH

SWAP

Enter the correct Parental

Code number.

CHANNEL

BLOCKING

LANGUAGE

SELECTION

AUTO

SLEEP

EXIT

MORE...

EXIT

HELP

MENU/

SELECT

STATUS/

EXIT

OF 5

Press Channel ▲▼ or Channel

Number buttons to select the

channel you want to block.

VOL

MUTE

Press the outer MENU ring

button (on the right) to "BLOCK

VIEWING" on the selected

channel.

CHANNEL BLOCKING MEMORY

Channel 1 9 blocked

100+

SURF

To Block or Un-Block

channels Firs t Enter

your Acces s Code.

CHOOSE CHANNEL

to ALLOW VIEW ING

POSITION

PIP

Press the outer MENU ring

button (on the left) to "ALLOW

VIEWING" on a blocked channel.

to EXIT

Repeat steps 3 and 4 for any other

channels you wish to block out.

Note: You can also block out the

use of the Audio/Video Input jacks

on the TV. This stops the viewing of

VCR programs which can be shown

through the A/V IN jacks. Just select

AUX 1 VIDEO, AUX 2 VIDEO,

etc. (located between the lowest and

highest channel numbers) on the

Channel Blocking screen and select

"blocked".

CHANNEL 1 9

CHANNEL BLOCKING ACTIVE

STOP

Pleas e enter Acces s Code

-OR-

Select another Channel

for viewing.

SMART HELP

Remember, once set

Parental Control blocks out

BLOCKED CHANNEL SCREEN MESSAGE

(Appears when an attempt to select a blocked

channel is made and Parental Control is ON.)

the selected channel number on

both the ANT A and ANT B

channel rings. Also, to make TV

viewing easier all channels (for

both ANT A/B and Audio/Video

Input jacks) will be unblocked,

once the correct Parental Code

number has been entered.

When the TV is turned OFF and

then back ON again, is when

Parental Control is back in place

for all blocked out channels.

Download from Www.Somanuals.com. All Manuals Search And Download.

FEATURE MENU CONTROLS (CONTINUED)

PARENTAL CONTROL

CONTENT ADVISORY

nother new area available to

Aparents for the censoring of

program material is through the

TV Guidelines and Movie Ratings

system. Program Content Advisory

data will soon be contained within

the broadcast signals of received

TV programs. When setup by the

parent or viewer, the TV can

respond to transmitted advisory

data by blocking out or denying

access to TV shows (based on

whether the program meets or

exceeds the limitations you select

as viewable). The TV program can

then only be viewed by entering the

correct and current Parental Code

Access number.

Note: Please remember that a vailid and current Access Code number will be

required in the setup and use of the TV’s “Content Advisory” system. Review the

previous SETUP CODE section on how to obtain a valid Parental Access Code

number before attempting to make adjustments within the Movie Ratings and

Parental Guidelines system.

PARENTAL CONTROL

DISABLED

CONTENT ADVISORY

SETUP

CODE

CONTENT

ADVISORY

TV PARENTAL

GUIDELINES

BLOCKED

TV-Y

TV-Y7 FV

TV-G

MOVIE

RATINGS

BLOCKED

PG-1 3

CHANNEL

BLOCKING

TV-PG DLSV

TV-1 4 DLSV

TV-MA LSV

NC-1 7

EXIT

HELP

to ENTER ACCESS CODE

to EXIT

POWER

INFO

GUIDE

The Content Advisory system uses

both “Movie Ratings” and a

“Parental Guidelines” form of

censoring. Refer to the following

page sections for explanations on

the different Rating system levels

and their uses.

ACC

VCR

PIP CH

SWAP

SOURCE FREEZE

CONTENT ADVISORY ACCESS

AUTO

SLEEP

MENU/

SELECT

STATUS/

EXIT

To Block or Un-Block

Program s , Firs t Enter

your Acces s Code.

BEGIN

to EXIT

VOL

Select the CONTENT

ADVISORY Menu option

MUTE

With PARENTAL CONTROL

Menu on screen, move the RED

highlight with the outer MENU

ring buttons. Then press the center

MENU button to select the feature.

CONTENT ADVISORY

PARENTAL

GUIDELINES

MOVIE

RATINGS

100+

SURF

REVIEW

SETTINGS

BLOCKING

OPTIONS

POSITION

PIP

A Parental Guideline/Movie Rating

status screen will appear with a

review of currently BLOCKED

Content Advisory categories.

EXIT

HELP

Press the outer MENU ring

button (on the right) to select the

ENTER ACCESS CODE Menu

item.

Enter the correct Parental

Code number (see note at the top

of this page).

NOTE: In normal Content Advisory system operation

the TV screen will display a message when

programming is blocked by a Movie Rating, Parental

Guideline, or Blocking Option control feature.

Entering the correct ACCESS CODE number will

unblock all the blocked Content Advisory Rated

channels until the TV is turned Off. The blocked

Advisory Ratings will be back in place when the TV

is turned back On again.

CHANNEL 8

BLOCKED BY CONTENT ADVISORY

TV GUIDELINES TV-1 4

“CONTENT ADVISORY” Menu

screen appears. Parental

Guidelines, Movie Ratings and

other blocking control items are

ready for selection and use.

Pleas e enter Acces s Code

-OR-

Select another Channel

for viewing.

STOP

Download from Www.Somanuals.com. All Manuals Search And Download.

FEATURE MENU CONTROLS (CONTINUED)

CONTENT ADVISORY

MOVIE RATINGS

ovie Ratings set viewing

Maccess levels for TV

programming according to current

Motion Picture Association of

America (MPAA) ratings. These

ratings are similar to the

categories used with the rated

movies appearing in cinema

theaters and with video rental

material.

CONTENT ADVISORY

PARENTAL

GUIDELINES

MOVIE

RATINGS

MOVIE BLOCKING

REVIEW

SETTINGS

BLOCKING

OPTIONS

PG-1 3

NC-1 7

EXIT

HELP

BEGIN

EXIT

HELP

Select the MOVIE RATINGS

Menu option.

POWER

With CONTENT ADVISORY

Menu on screen, move the RED

highlight with the outer MENU

ring buttons. Then press the center

MENU button to select the feature.

INFO

GUIDE

• G - General Audience: Most parents would find this

program suitable for all ages. This type of programming

contains little or no violence, no strong language, and

little or no sexual dialogue or situations.

• PG - Parental Guidance: This programming contains

material that parents may find unsuitable for younger

children. It may contain one or more of the following:

Moderate violence, some sexual situations, infrequent

coarse language, or some suggestive dialogue.

• PG-13: This programming contains material that parents

may find unsuitable for children under the age of 13. It

contains one or more of the following: violence, sexual

situations, coarse language, or suggestive dialogue.

• R - Restricted: This programming is specifically

designed for adults. Anyone under the age of 17 should

only view this programming with an accompanying parent

or adult guardian. It contains one or more of the following:

intense violence, intense sexual situations, strong coarse

language, or intensely suggestive dialogue.

• NC-17 - No one under 17 admitted: This type of pro-

gramming should be viewed by adults only. It contains

graphic violence, explicit sex, or crude indecent language.

• X - Mature audience only: This type of programming

contains one or more of the following: very graphic

violence, very graphic and explicit or indecent sexual acts,

very coarse and intensely suggestive language.

ACC

VCR

PIP CH

SWAP

SOURCE FREEZE

AUTO

SLEEP

Press the MENU ring and

center MENU buttons to

highlight and select (

) the

desired MOVIE BLOCKING

level.

MENU/

SELECT

STATUS/

EXIT

VOL

MUTE

When in operation a “Blocked -

Movie Rating” TV screen appears

when movies are received which

include the same selected rating as

the Movie Blocking setting(s).

Only the correct Access Code

number, entered by the viewer,

will unblock or allow the viewing

of a block rated program.

100+

SURF

POSITION

PIP

STOP

SMART HELP

Note: When a Movie

Rating is selected (

) all

higher level ratings are

automatically blocked (although

each individual Movie Rating can

be manually selected and turned

On or Off as desired). Programs

with lower than the selected rating

level are allowed for viewing or

unblocked.

Download from Www.Somanuals.com. All Manuals Search And Download.

FEATURE MENU CONTROLS (CONTINUED)

CONTENT ADVISORY

PARENTAL GUIDELINES

arental Guidelines can be

Peven more defined and specific

in the degree and extent of

material parents may allow for TV

program viewing. Sub-settings for

Language, Violence, and other

blocking factors can be manually

switched On or Off for use within

the major Parental Guideline

categories (TV-Y7, TV-PG, etc.).

BEGIN

CONTENT ADVISORY

PARENTAL

GUIDELINES

MOVIE

RATINGS

PARENTAL GUIDELINES

To Select Rating

TV TV TV TV TV TV

PG 1 4 MA

REVIEW

SETTINGS

BLOCKING

OPTIONS

To Select Blocking

NOT BLOCKED

ALW AYS BLOCKED

(FV) FANTASY VIOLENCE

EXIT

HELP

Select the PARENTAL

GUIDELINES Menu option.

EXIT

HELP

PARENTAL GUIDELINES

POWER

To Select Rating

TV TV TV TV TV TV

With CONTENT ADVISORY

Menu on screen, move the RED

highlight with the outer MENU

ring buttons. Then press the center

MENU button to select the feature.

INFO

GUIDE

PG 1 4 MA

To Select Blocking

NOT BLOCKED

ALW AYS BLOCKED

(L) LANGUAGE

(V) VIOLENCE

(S) SEXUAL CONTENT

(D) SUGGESTIVE DIALOG

ACC

VCR

PIP CH

SWAP

SOURCE FREEZE

AUTO

SLEEP

Press the MENU ring (Left

and Right side) buttons to

highlight and select the desired

PARENTAL GUIDELINE rating

level (TV-Y, TV-Y7, etc.).

MENU/

SELECT

STATUS/

EXIT

HELP

• TV-Y - Appropriate for all children: Designed for a

very young audience, including children ages 2-6. This type of

programming is not expected to frighten younger children.

• TV-Y7 -Appropriate for children seven and older: It

may be more appropriate for children who have acquired the

development skills needed to distinguish between make-believe

and reality. This programming may include mild fantasy and

comic violence (FV).

• TV-G - General Audience: This type of programming

contains little or no violence, no strong language, and little or

no sexual dialogue or situations.

• TV-PG - Parental Guidance suggested: This type of

programming contains one or more of the following: Moderate

violence (V), some sexual situations (S), infrequent coarse

language (L), or some suggestive dialogue (D).

• TV-14 - Unsuitable for children under 14: This type of

programming contains one or more of the following: intense

violence (V), intense sexual situations (S), strong coarse

language (L), or intensely suggestive dialogue (D).

• TV-MA - Mature audence only: This type of

programming contains one or more of the following: graphic

violence (V), explicit sexual situations (S), or crude indecent

language (L).

VOL

MUTE

Press the MENU ring and

center MENU buttons to Block

(

) the selected Parental

Guideline category (or to set other

individual blocking feature items

available within that Guideline

category (L, V. S, D, etc.) as

desired).

100+

SURF

POSITION

PIP

Note: Selecting “ALWAYS

BLOCKED” (or individually

adjusting the L, V, S, D settings)

for any one rating will set all other

higher level ratings to be

automatically blocked as well.

STOP

SMART HELP

• (V) - Violence

• (S) - Sexual situations

• (L) - Language

• (D) - Inappropriate dialogue

• (FV) - Fantasy Violence may frighten children under

seven. Some cartoons may have this rating. Available in

the TV-Y7 category only.

The TV-Y7; TV-PG;

TV-14; and TV-MA

guidelines also include

customized settings for various

additional items such as V

(violence), S (sexual situations), L

(coarse language), D (suggestive

dialogue), and FV (fantasy

violence). These additional

settings are category specific and

can be individually selected for

use as desired.

Download from Www.Somanuals.com. All Manuals Search And Download.

FEATURE MENU CONTROLS (CONTINUED)

CONTENT ADVISORY

BLOCKING OPTIONS

he Content Advisory system

Talso has “Blocking

CONTENT ADVISORY

PARENTAL

GUIDELINES

MOVIE

RATINGS

BLOCKING OPTIONS

Blocking Sys tem :

Option”controls which can be

used to deny viewing access for

channel programs and movies

even when they are “unrated”, or

contain “no rating” information

as broadcasted.

DISABLED

ENABLED

REVIEW

SETTINGS

BLOCKING

OPTIONS

Set

To Block On:

CHANNEL CHANGE

UNRATED PROGRAMMING

NO RATING INFORMATION

EXIT

HELP

BEGIN

EXIT

HELP

POWER

Select the BLOCKING

OPTIONS Menu control.

INFO

GUIDE

Note: Remember that Content Advisory data or encoded

information is not available with all received TV

programming (this also includes commercials, and other

program spot announcements). Broadcaster’s can decide

not to encode any kind of content advisory ratings with

their programming, or they can actually choose to encode

programs to be “unrated.”

With CONTENT ADVISORY

Menu on screen, move the RED

highlight with the outer MENU

ring buttons. Then press the center

MENU button to select the feature.

ACC

VCR

PIP CH

DN UP

SWAP

SOURCE FREEZE

AUTO

SLEEP

MENU/

SELECT

STATUS/

EXIT

The TV Blocking Options allow the viewer to block any

program without content advisory data with the use of its

“NO RATING INFORMATION” control. And to block

programs that are encoded as “unrated” with its

“UNRATED PROGRAMMING” control option.

Press the MENU ring and

center MENU buttons to turn the

Blocking System On (highlight

and select

ENABLED). Then

use the remote Menu buttons to

select the desired programming

and information blocking options.

VOL

MUTE

Since the reception of Content Advisory data can take a

few seconds, you may want to use the “CHANNEL

CHANGE” option to be sure no viewing is allowed during

blocked program channel changes. This can eliminate the

display of a few seconds of undesirable video on the TV,

or receiving scenes from a Ratings blocked channel

source.

100+

SURF

POSITION

PIP

Please refer to Note shown with

this page section for details on

“unrated” and “no rating” program

control options.

STOP

CONTENT ADVISORY

REVIEW SETTINGS

CONTENT ADVISORY

se the Review Settings control

Uto quickly check the status for

Content Advisory system Parental

Guidelines and Movie Rating

“Blocked” program levels.

BEGIN

PARENTAL

GUIDELINES

MOVIE

RATINGS

ENABLED

CONTENT ADVISORY

TV PARENTAL

GUIDELINES

BLOCKED

TV-Y

TV-Y7 FV

TV-G

TV-PG DLSV

TV-1 4 DLSV

TV-MA LSV

MOVIE

RATINGS

BLOCKED

PG-1 3

REVIEW

SETTINGS

BLOCKING

OPTIONS

NC-1 7

EXIT

HELP

Select the REVIEW

SETTINGS Menu option.

to EXIT

POWER

With CONTENT ADVISORY

Menu on screen, move the RED

highlight with the outer MENU

ring buttons. Then press the center

MENU button to select the feature.

INFO

GUIDE

ACC

VCR

PIP CH

SWAP

SOURCE FREEZE

AUTO

SLEEP

The TV screen will display the

current Parental Guideline and

Movie Ratings Blocked program

settings. Content Advisory system

status will also be shown (Enabled

-On, or Disabled - Off).

MENU/

SELECT

STATUS/

EXIT

VOL

MUTE

STOP

Download from Www.Somanuals.com. All Manuals Search And Download.

FEATURE MENU CONTROLS (CONTINUED)

CHANNEL LABELS

o you ever have trouble

Dremembering on which

channel a particular station or

network is located? The Channel

Labels Control is a quick way to

view and select channels from a

list of Labeled channels.

FEATURE MENU

PARENTAL

CONTROL

CHANNEL

LABELS

LANGUAGE

SELECTION

A Label is a four letter callout you

can set to appear with the on

screen channel number. Example

Label: WXYZ - for a TV station's

call letters.

EXIT

MORE...

OF 5

CHANNEL LABELS

Create Your Own

Choos e From Lis t

MANUAL

To select channels from the

Channel Labels Control:

POWER

PRESETS

EXIT

INFO

GUIDE

BEGIN

ACC

VCR

PIP CH

SWAP

SOURCE FREEZE

With the FEATURE MENU (3

of 5) on the TV screen, move the

RED highlight with the outer

AUTO

SLEEP

MENU/

SELECT

STATUS/

EXIT

ring buttons. Then

press the center MENU button to

select CHANNEL LABELS.

VOL

MUTE

Press the MENU ring and

center MENU buttons to

highlight and select either:

BRV

CBN

CBS

CHANNEL GUIDE LABEL

C H B S

Channel

"MANUAL" to create your own

label for a channel.

CNBC

CMT

100+

SURF

ANTENNA A LABELS

to SELECT

CHOOSE ANTENNA A CHANNEL

to SELECT LABEL

"PRESETS" to choose from a list

of prewritten channel labels.

POSITION

PIP

to CHANGE

when FINISHED

to EXIT

(See instruction details on this

page.)

MANUAL- To create your

own Channel Label:

PRESETS -To pick a Label

from the "LABEL" list:

Press the STATUS button to

clear the screen.

Press the Channel ▲▼ or

Number buttons to select

desired station.

Press the Channel ▲▼ or

Number buttons to select

desired station.

STOP

A red highlight shows the

active letter space for the

channel label.

Press the outer MENU

ring (top or bottom)

buttons to move up and

down the Channel Label

list.

Press the outer MENU

ring (top or bottom)

buttons on the remote to

pick any of the letters or

symbols that are given for

your use.

Just stop on any label you

might want to use.

The selected label

automatically appears with

channel changes and when

the STATUS button is

pressed.

Press the outer MENU

ring (Left and Right)

buttons on the remote to

move the red highlight to

the other letter spaces and

repeat.

Press the STATUS button

to clear the screen when

finished.

Press the STATUS button

to clear the screen when

finished.

Download from Www.Somanuals.com. All Manuals Search And Download.

FEATURE MENU CONTROLS (CONTINUED)

LANGUAGE

ote: If you went through First

NTime Setup, This task has

already been completed for you.

For our Spanish and French

speaking TV owners an on-screen

LANGUAGE option is present.

With the LANGUAGE control you

can set the TV’s on-screen features

to be shown in either English,

Spanish or French.

FEATURE MENU

PICTURE

MAIN MENU

PICTURE

CABLE

TUNING

SOURCE

SOUND

HELP

CLOSED

CAPTIONS

CHANNEL

MEMORY

FEATURES

BEGIN

EXIT

1 ST TIME SETUP

MORE...

OF 5

EXIT

Select the LANGUAGE

DISPLAY control.

With FEATURES MENU (3 of 5)

on screen, move the RED

POWER

highlight with the outer MENU

ring buttons. Then press the center

MENU button to select the feature.

FEATURE MENU

INFO

GUIDE

SET CLOCK &

ALARM TIMER

SLEEP

TIMER

ACC

VCR

PIP CH

HALF HOUR

REMINDER

Press the MENU ring and

center MENU buttons to

highlight and select (

) English,

Español, or Francais on the display

control.

SWAP

SOURCE FREEZE

CHANNEL

DISPLAY

AUTO

SLEEP

MORE...

OF 5

EXIT

MENU/

SELECT

STATUS/

EXIT

Text for the on-screen Menu will

change to the selected language.

VOL

MUTE

FEATURE MENU

Press the STATUS button to

clear the screen.

CHANNEL

LABELS

PARENTAL

CONTROL

STOP

LANGUAGE

SELECTION

100+

SURF

EXIT

SMART HELP

POSITION

PIP

OF 5

Remember, the

Language control only

makes the TV’s on-screen

(MENU) items appear in English,

Spanish, or French text. It does not

change the other on-screen text

features such as Closed Captioned

(CC) TV shows.

LANGUAGE SELECTION

ENGLISH

ESPANOL

FRANCAIS

EXIT

HELP

Download from Www.Somanuals.com. All Manuals Search And Download.

SOUND MENU CONTROL ADJUSTMENTS

BASS, TREBLE, BALANCE

our TV also has individual

Ysound adjustment controls. The

BASS (low frequency), TREBLE

(high frequency) , and Speaker

BALANCE may all be used to

adjust the sound playback of TV

programs.

MAIN MENU

PICTURE

SOUND

HELP

FEATURES

SOUND MENU

BASS

TREBLE

EXIT

1 ST TIME SETUP

BALANCE

BASS BOOST

INCREDIBLE STEREO

BEGIN

POWER

MORE...

EXIT

Select BASS, or TREBLE, or

BALANCE sound control.

OF 3

INFO

GUIDE

With the SOUND MENU on the

screen, move the RED highlight

ACC

VCR

PIP CH

DN UP

SWAP

SOURCE FREEZE

AUTO

SLEEP

with the outer MENU

ring

buttons. Then press the center

MENU button to select the feature.

MENU/

SELECT

STATUS/

EXIT

BASS

VOL

Press the outer MENU ring

(Left and Right) buttons to adjust

the sound control to levels you

prefer.

MUTE

MIN

MAX

EXIT

NEXT...

HELP

Select and then press MENU

(M) button to view additional

controls grouped under same

feature heading. For

100+

SURF

Press the STATUS button to

clear the screen.

POSITION

PIP

Example: Treble, Balance,

Bass Boost, Stereo, etc.

STOP

BASS BOOST

he BASS BOOST control

Tincreases the low frequency

audio range of the TV. This creates

a deeper, fuller playback sound

which can be heard through the

TV's speakers.

MAIN MENU

PICTURE

SOUND

HELP

FEATURES

SOUND MENU

1 ST TIME SETUP

EXIT

BASS

TREBLE

BEGIN

BALANCE

BASS BOOST

Select BASS BOOST sound

INCREDIBLE STEREO

EXIT

control.

POWER

MORE...

With the SOUND MENU on the

screen, move the RED highlight

OF 3

INFO

GUIDE

with the outer MENU

buttons. Then press the center

ring

ACC

VCR

PIP CH

DN UP

SWAP

SOURCE FREEZE

MENU button to select the feature.

AUTO

SLEEP

Press the MENU ring and

center MENU buttons to

highlight and turn ON (

) the

BASS BOOST control.

MENU/

STATUS/

EXIT

SELECT

BASS BOOST

VOL

OFF

MUTE

EXIT

NEXT...

HELP

Press the STATUS button to

clear the screen.

100+

SURF

STOP

POSITION

PIP

Download from Www.Somanuals.com. All Manuals Search And Download.

SOUND MENU CONTROLS (CONTINUED)

SMART

HELP

STEREO

our TV is able to receive

Remember.

Ybroadcast stereo TV programs.

The TV is equipped with an

amplifier and twin speaker system

through which the stereo sound

can be heard.

Note: STEREO will appear on the

TV’s channel status screen to

indicate when a stereo broadcast

signal is available and received.

If a stereo signal is

not available and

the TV is placed in

the STEREO mode,

sound coming from

the TV will remain

MAIN MENU

PICTURE

SOUND

HELP

FEATURES

SOUND MENU

monaural (mono).

EXIT

1 ST TIME SETUP

BASS

TREBLE

BALANCE

BASS BOOST

BEGIN

INCREDIBLE STEREO

EXIT

POWER

Select STEREO sound control.

MORE...

OF 3

With the SOUND MENU on the

screen, move the RED highlight

INFO

GUIDE

with the outer MENU

buttons. Then press the center

MENU button to select the feature.

ring

ACC

VCR

PIP CH

SWAP

SOURCE FREEZE

AUTO

SLEEP

SOUND MENU

TV SPEAKERS

Press the MENU ring and

center MENU buttons to

highlight and turn ON (

) the

STEREO mode.

MENU/

SELECT

STATUS/

EXIT

STEREO

DISPLAY VOLUME

VOL

SECOND AUDIO PROGRAM

MUTE

Press the STATUS button to

clear the screen.

MORE...

OF 3

EXIT

STOP

100+

SURF

POSITION

PIP

STEREO

MONO AT ALL TIMES

STEREO IF AVAILABLE

SECOND AUDIO PROGRAM

EXIT

HELP

Second Audio Program (SAP) is

part of the stereo broadcast

system. Sent as a additional

audio channel SAP can be heard

apart from the current TV

program sound. TV stations are

free to use SAP for any number

of purposes, but many experts

believe it will be used for foreign

language translations of TV

shows (or for weather and news

bulletins.)

SOUND MENU

TV SPEAKERS

STEREO

SECOND PROGRAM SOUND CAN

ONLY BE SELECTED (

) WHEN

SAP INFORMATION IS PRESENT

ON CURRENT CHANNEL.

DISPLAY VOLUME

SECOND AUDIO PROGRAM

MORE...

OF 3

EXIT

SECOND AUDIO PROGRAM

NORMAL SOUND

NOTE: If a SAP signal is not

present with a selected program,

the SAP option can not be

selected. "This program does not

contain SAP information" will

show on the TV screen.

SECOND PROGRAM SOUND

EXIT

HELP

Download from Www.Somanuals.com. All Manuals Search And Download.

SOUND MENU CONTROLS (CONTINUED)

INCREDIBLE STERE0

he Incredible Stereo control can

Tbe used to add greater depth

and dimension to both monaural

(MONO) and STEREO TV sound.

BEGIN

Select the INCREDIBLE

STEREO control.

MAIN MENU

PICTURE

With the SOUND MENU on the

screen, move the RED highlight

SOUND

HELP

with the outer MENU

ring

FEATURES

SOUND MENU

BASS

buttons. Then press the center

MENU button to select the feature.

1 ST TIME SETUP

EXIT

TREBLE

BALANCE

BASS BOOST

Press the MENU ring and

center MENU buttons to highlight

and turn ON (

) the INCREDIBLE

STEREO mode.

INCREDIBLE STEREO

EXIT

POWER

MORE...

OF 3

INFO

GUIDE

For Example: “MAXIMUM”

spreads the Incredible Stereo effect

as wide as possible.

ACC

VCR

PIP CH

SWAP

SOURCE FREEZE

AUTO

SLEEP

Press the STATUS button to

clear the screen.

MENU/

SELECT

STATUS/

EXIT

INCREDIBLE STEREO

MINIMUM

MAXIMUM

STOP

VOL

MUTE

NO EXPANSION

EXIT

NEXT...

HELP

100+

SURF

POSITION

PIP

Download from Www.Somanuals.com. All Manuals Search And Download.

SOUND MENU CONTROLS (CONTINUED)

DISPLAY VOLUME

se the DISPLAY VOLUME

Ucontrol to see the TV's volume

level settings on the TV screen.

Once set the Volume Display will

be seen each time the VOLUME

buttons (on the TV or remote) are

pressed.

MAIN MENU

PICTURE

BEGIN

SOUND

HELP

SOUND MENU

BASS

Select DISPLAY VOLUME

control.

TREBLE

FEATURES

BALANCE

BASS BOOST

With SOUND MENU (2 of 3) on

screen, move the RED highlight

1 ST TIME SETUP

EXIT

INCREDIBLE STEREO

with the outer MENU

ring

MORE...

EXIT

buttons. Then press the center

OF 3

MENU button to select the feature.

POWER

INFO

GUIDE

Press the MENU ring and

center MENU buttons to highlight

and turn ON (

) the DURING

ADJUSTMENT Display Volume

control.

ACC

VCR

PIP CH

SWAP

SOURCE FREEZE

SOUND MENU

TV SPEAKERS

STEREO

AUTO

SLEEP

DISPLAY VOLUME

MENU/

STATUS/

EXIT

SELECT

Press the STATUS button to

clear the screen.

SECOND AUDIO PROGRAM

MORE...

OF 3

EXIT

VOL

STOP

MUTE

SMART HELP

Remember, "DURING

ADJUSTMENT" means the

volume level will be on screen

whenever the Volume buttons are

pressed.

100+

SURF

DISPLAY VOLUME

NEVER

POSITION

PIP

DURING ADJ USTMENT

EXIT

HELP

Download from Www.Somanuals.com. All Manuals Search And Download.

SOUND MENU CONTROLS (CONTINUED)

TV SPEAKERS

ould you like to hear TV

Wprograms through your audio

hi-fi system? The TV's Variable

Audio Output jacks and TV

Speaker On/Off control work

together to offer you this TV sound

BACK OF TV

FIXED

VAR

VIDEO

VIDEO OUT

IR BLASTER

SOUND MENU

TV SPEAKERS

AUDIO

STEREO

PIP

AUX

AUDIO OUT

DISPLAY VOLUME

INPUTS

option.

PIP

ANT A/CABLE

BEGIN

ANT B/CABLE

75 UHF/VHF

⍀

UHF/VHF

SECOND AUDIO PROGRAM

⍀

Connect the R(ight) and L(eft)

VARIABLE AUDIO OUT jacks

on the TV to the R and L Audio

Input jacks on your amplifier or

sound system.

MORE...

EXIT

TV SPEAKERS

OF 3

VARIABLE

AUDIO

OUTPUT JACKS

NORMAL

TV SPEAKERS OFF

POWER

EXIT

HELP

INFO

GUIDE

Set the audio system's volume to

normal listening level.

AUDIO IN

(RED/WHITE)

ACC

VCR

SWAP

PIP CH

SOURCE FREEZE

Turn the TV and audio system

ON. You can now adjust the sound

level coming from the audio

system with the Volume ▲▼

buttons on the TV or remote.

AUTO

SLEEP

AUX/TV INPUT

MENU/

SELECT

STATUS/

EXIT

PHONO INPUT

VOL

To hear the TV sound from only

the audio system speakers, select

TV SPEAKERS control.

MUTE

With SOUND MENU (2 of 3) on

screen, move the RED highlight

100+

SURF

with the outer MENU

ring

POSITION

PIP

buttons. Then press the center

MENU button to select the feature.

AUDIO SYSTEM

Press the MENU ring and

center MENU buttons to

highlight and turn OFF (

) the TV

SPEAKERS control.

You should now only hear TV

sound coming from the audio

system speakers.

Press the STATUS button to

clear the screen.

NOTE: The TV’s FIXED

AUDIO OUTPUT jacks can

also be used for the playback

of TV program sound with an

external audio amplifier, or

home theater hi-fi system,

Connection of the FIXED

AUDIO OUT(puts) is similar

to the Variable Audio Outputs

(as shown above). However,

specific sound level

adjustments will be made with

the controls at the external

amplifier or home sound

STOP

SMART HELP

FIXED

VAR

PIP

system (instead of through the

TV’s audio level controls.)

VIDEO OUT

IR BLASTER

Remember, the audio

system may have to be in

AUX(iliary) mode to play sound

from the TV (Outputs).

AUDIO OUT

NOTE: The TV’s PIP

the ANT A and ANT B Input

sources are connected for

use), the PIP AUDIO

OUTPUTs will switch from

stereo to monaural (mono)

sound. Stereo sound will only

be available with the TV’s

AUDIO OUTPUT jacks can

also be used for additional

stereo playback options such

as wireless transmitter

headphone hook-up, or as an

external amplifier connection

Note: When the TV SPEAKER

control is set to "NORMAL" (for

TV speaker operation) make sure

the VARIABLE AUDIO OUTPUT

control (see next page) is also set

to "STEREO" in order for the TV's

AUDIO OUTPUT jacks to work

properly.

ANT A/CABLE

75 ⍀ UHF/VHF

source. However, with normal Main screen (or ANT A

PIP feature operations (when supplied signal) at that time.

Download from Www.Somanuals.com. All Manuals Search And Download.

SOUND MENU CONTROLS (CONTINUED)

SMART

HELP

SURROUND SOUND

REAR SURROUND SOUND

SPEAKER TERMINALS

y adding optional external

Bspeakers to the TV's sound

system, you can create the feeling

of reflected sound that surrounds

you at a movie theater or concert

Remember,

REAR SURROUND SPEAKERS

Surround Sound

will not work with

only one speaker

connected; or with

monaural audio

material (unless

Variable Audio

Surround control is

turned ON - see

section below).

BACK OF TV

–

hall.

BEGIN

SUBWOOFER

–

SUBWOOFER

S-VIDEO

Connect both external

speakers to the speaker wire

terminals on the TV.

SUBWOOFER OUTPUT

Use the Subwoofer Output (RCA

plug connector) to send the

subwoofer audio channel signal (at

line level) to an optional external

powered Subwoofer speaker. The

Subwoofer audio signal is for the

playback of only the lowest

FIXED

VIDEO

VIDEO OUT

VAR

AUDIO

PIP

AUDIO OUT

AUX

INPUTS

ANT A/CABLE

75 UHF/VHF

PIP

ANT B/CABLE

⍀

UHF/VHF

Recommended speakers: 8ohm, 15

watt minimum. Be sure the (+) and

(-) speaker wires are connected to

the correct R(ight) and L(eft)

frequency notes (under 100 Hz).

speaker terminals on the TV.

Place the speakers so the

viewing area is between the TV

and the rear surround speakers.

(See overhead view drawing.)

Turn TV ON and place the

STEREO control to the "STEREO

IF AVAILABLE" (

) position.

SUBWOOFER

REAR SURROUND SOUND SPEAKERS

After setup whenever a stereo

signal is received the audio will be

heard in Surround Sound.

Note: The rear Surround Sound speakers will not

be heard at the same volume level as the front TV

speakers. It is intended for the rear speakers to

give a background noise effect which requires a

lower volume level than the TV's front speakers.

REAR SPEAKER

STOP

PRIMARY VIEWING AREA

VARIABLE AUDIO OUTPUT

he TV's Variable Audio Output

Tjacks can also be used for

Surround Sound. Once they are

connected to an external hi-fi

system its speakers can be used for

the playback of Surround Sound.

BEGIN

BACK OF TV

SOUND MENU

FIXED

VAR

VIDEO

VIDEO OUT

IR BLASTER

VARIABLE AUDIO OUTPUT

AUDIO

PIP

AUX

AUDIO OUT

INPUTS

PIP

ANT A/CABLE

ANT B/CABLE

75 UHF/VHF

⍀

UHF/VHF

⍀

MORE...

EXIT

VARIABLE AUDIO OUTPUT

STEREO

VARIABLE AUDIO

OUTPUT JACKS

SURROUND

Connect the R(ight) and L(eft)

VARIABLE AUDIO OUT jacks

on the TV to the R and L Audio

Input jacks on your amplifier or

sound system.

POWER

EXIT

HELP

INFO

GUIDE

AUDIO

INPUT JACKS

ACC

VCR

PIP CH

SWAP

SOURCE FREEZE

AUTO

SLEEP

AUX/TV INPUT

PHONO INPUT

MENU/

SELECT

STATUS/

EXIT

Turn TV ON and place the

VARIABLE AUDIO OUTPUT on

screen control to the SURROUND

(

) position. (Sound Menu 3 of 3).

VOL

MUTE

Note:This will change the

Left/Right channel audio line level

signal at the Audio Output jacks to

the same signal found at the TV's

Surround Sound Speaker terminals.

100+

SURF

POSITION

PIP

AUDIO SYSTEM SPEAKERS USED AS REAR

SURROUND SOUND SPEAKERS

STOP

Download from Www.Somanuals.com. All Manuals Search And Download.

USING THE AUDIO/VIDEO INPUT JACKS

AUX 1 VIDEO INPUTS

NOTE: Connections and use of the

TV's rear AUX 2 VIDEO Input jacks

are the same as for the AUX 1 jacks

(except "AUX 2" is selected as the

Picture Source in step 3).

he TV's Audio/Video Input

Tjacks are for direct picture and

sound connections between the TV

and a VCR (or Video Disc Player,

etc.) that has Audio/Video Output

jacks.

To view the playback of a VCR

tape by using the Audio/Video

Input jacks on the TV:

PICTURE AND SOUND FROM

PLAYBACK OF VCR TAPE

BACK OF TV

FIXED

VAR

VIDEO

VIDEO OUT

IR BLASTER

FEATURE MENU

AUDIO

PIP

PICTURE

SOURCE

CABLE

TUNING

PICTURE SOURCE SELECT

AUX

AUDIO OUT

INPUTS

ANT A

BEGIN

PIP

CLOSED

CAPTIONS

ANT A/CABLE

CHANNEL

ANT B

ANT B/CABLE

75 UHF/VHF

⍀

UHF/VHF

⍀

MEMORY

AUX 1 VIDEO

Connect the VIDEO OUT jack

from the VCR to the AUX 1

VIDEO IN jack on the TV.

AUX 1 Y P

AUX 2 VIDEO

SIDE VIDEO

OF 3

MORE...

EXIT

VIDEO IN

(YELLOW)

AUDIO IN

(RED/WHITE)

EXIT

HELP

Connect the AUDIO OUT

jacks R(ight) and L(eft) from the

VCR to the AUX 1 AUDIO IN

jacks on the TV.

POWER

INFO

GUIDE

OUT

ANTENNA

OUT

AUDIO/VIDEO

OUTPUT JACKS

ON VCR

ACC

VCR

PIP CH

DN UP

VIDEO

SWAP

SOURCE FREEZE

AUDIO

Select the "AUX 1 VIDEO"

PICTURE SOURCE SELECT

control on the TV.

AUTO

SLEEP

MENU/

SELECT

STATUS/

EXIT

With the FEATURES MENU on

screen, move the RED highlight

VOL

MUTE

with the outer MENU

ring

buttons. Then press the center

MENU button to select the feature.

VCR

If you have a single (monaural)

Press the MENU ring and

center MENU buttons to

highlight and select (

) the AUX

1 VIDEO mode.

Audio Output VCR, "Y" connectors

are available to complete your

connection. Contact your dealer, or

our Parts Information Center (1-800-

851-8885) to order any optional

accessories.

100+

SURF

POSITION

PIP

Turn the VCR ON and press

PLAY to view the tape on the TV.

STOP

SMART HELP

Remember, after it is

connected an easy way to

select the AUX 1 VIDEO mode is

to press the AV button on the

remote. Other Auxiliary modes

(AUX 2 VIDEO, AUX 1 Y PB PR,

etc.);ANT A/B, and the last

channel viewed can also be

selected by pressing the AV

button.

Also, if you have added AUX 1

VIDEO to the TV's channel

memory (see page 14), you can

just press the CHANNEL ▲▼

buttons to select the AUX 1 mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

USING THE AUDIO/VIDEO INPUT JACKS (CONTINUED)

SIDE VIDEO INPUTS

or more convenient Direct

Fplayback connections the TV's

Side Video Input panel can be

used. Located on the TV's right

side panel (angled toward the front

for easy access) these Audio/Video

Input jacks allow for quick

connections, particularly for the

playback of Camcorder tape

recordings.

PICTURE AND SOUND FROM PLAYBACK

OF CAMCORDER TAPE

PICTURE SOURCE SELECT

FEATURE MENU

PICTURE

ANT A

ANT B

AUX 1 VIDEO

CABLE

TUNING

SOURCE

AUX 1 Y P

AUX 2 VIDEO

SIDE VIDEO

CLOSED

CAPTIONS

CHANNEL

MEMORY

To view the playback of a

Camcorder recording using the

Audio/Video Input jacks on the

side of the TV:

MORE...

OF 4

EXIT

HELP

BEGIN

SIDE PANEL AUDIO/VIDEO

INPUT JACKS

(S-VIDEO Input plug also provided

for possible S-VHS tape playback

material.)

POWER

Connect the VIDEO OUT jack

from the Camcorder to the VIDEO

IN jack on the side of the TV.

S-VIDEO

INFO

GUIDE

VIDEO

ACC

VCR

PIP CH

SWAP

SOURCE FREEZE

AUDIO

Connect the AUDIO OUT

jacks R(ight) and L(eft) from the

Camcorder to the AUDIO IN jacks

on the side of the TV.

AUTO

SLEEP

MENU/

SELECT

STATUS/

EXIT

AUDIO IN

(RED/WHITE)

VIDEO IN

(YELLOW)

Select the "SIDE VIDEO"

PICTURE SOURCE SELECT

control on the TV.

VOL

MUTE

With the FEATURES MENU on

screen, move the RED highlight

with the outer MENU

ring

100+

SURF

buttons. Then press the center

POSITION

PIP

MENU button to select the feature.

Press the MENU ring and

center MENU buttons to highlight

and select (

) the SIDE VIDEO

mode.

AUDIO/VIDEO

OUTPUT JACKS

ON CAMCORDER

CAMCORDER

If you have a single (monaural)

Turn the Camcorder ON and

press PLAY to view the tape on

Audio Output Camcorder, "Y"

connectors are available to complete

your connection. Contact your

dealer, or our Parts Information

Center (1-800-851-8885) to order

any optional accessories.

the TV.

STOP

SMART HELP

Remember, an easy way

to select the SIDE VIDEO

mode is to press the AV button on

the remote. Other Auiliary modes,

ANT A/B, and the last channel

viewed can also be selected in this

way.

Also, if you have added SIDE

VIDEO to the TV's channel

memory (see page 14), you can just

press the CHANNEL ▲▼ buttons

to select the SIDE VIDEO mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

USING THE AUDIO/VIDEO INPUT JACKS (CONTINUED)

AUX1 - S-VIDEO INPUTS

he S(uper)-Video connection on

Tthe rear of the TV can give you

better picture detail and clarity, for

the playback of S-VHS VCR tapes or

Video Discs, than the normal

NOTE: Connections and use of the TV's

AUX 2 S-VIDEO Input jacks are the same as

for the AUX 1 S-VIDEO jacks (except

“AUX 2” S-VIDEO is selected as the Picture

Source in step 3).

PICTURE AND SOUND FROM

PLAYBACK OF S-VHS VCR TAPE

BACK OF TV

antenna picture connections.

S-VIDEO

Note: The VCR (or Video Disc

Player) must have a S-VIDEO

OUT(put) jack in order for you to

complete the connections shown on

this page.

FIXED

VAR

VIDEO

FEATURE MENU

VIDEO OUT

AUDIO

PICTURE

SOURCE

CABLE

TUNING

PIP

IR BLASTER

AUX

AUDIO OUT

INPUTS

CLOSED

CAPTIONS

PICTU

ANSO

URCE SELECT

PIP

ANT A/CABLE

ANT B/CABLE

75 UHF/VHF

⍀

UHF/VHF

MEMORY

⍀

BEGIN

ANT A

ANT B

MORE...

EXIT

Connect the S-VIDEO (S-

VHS) OUT jack from the VCR to

the S-VIDEO AUX 1 IN(put) jack

on the TV.

AUX 1 S-VIDEO

S-VIDEO

CABLE

OF 3

AUX 1 Y P

AUX 2 VIDEO

SIDE VIDEO

AUDIO OUT

(RED/WHITE)

S-VIDEO OUT

POWER

The S-VIDEO connecting cable

will be supplied with the S-VHS

VCR (or Video Disc Player).

EXIT

HELP

INFO

GUIDE

OUT

ACC

VCR

PIP CH

S-VIDEO

ANTENNA

VIDEO

AUDIO

SWAP

SOURCE FREEZE

Connect the AUDIO OUT

jacks R(ight) and L(eft) from the

VCR to the AUDIO AUX 1IN(put)

jacks on the TV.

AUTO

SLEEP

MENU/

SELECT

STATUS/

EXIT

VOL

Select the "AUX 1 S-VIDEO"

PICTURE SOURCE control.

MUTE

S-VHS VCR

With the FEATURES MENU on

screen, move the RED highlight

NOTE: A CD-i (Compact Disc Interactive)

player, Video Game, or other S-VIDEO

accessory can be hooked up to the TV using

this type of connection. Please be aware that

such video sources, which show a constant

non-moving pattern on the TV screen, can

cause picture tube damage. When not in use

turn your video accessories OFF. Also,

regularly alternate the use of video sources

with normal TV viewing.

with the outer MENU

ring

100+

SURF

buttons. Then press the center

POSITION

PIP

MENU button to select the feature.

The "AUX 1 S VIDEO" picture

source option appears only when a

S-VIDEO cable has been connected

to the TV’s AUX 1 IN(puts).

Turn the VCR ON and place it

in the S-VIDEO (or S-VHS)

playback mode. Insert S-VHS

cassette tape and playback in a

normal manner.

STOP

SMART HELP

Remember, after it is

connected an easy way to

select the AUX 1 S-VIDEO mode

is to press the AV button on the

remote.)

Also, if you have added AUX 1 to

the TV's channel memory, you can

just press the CHANNEL ▲▼

buttons to select the S-VIDEO

mode (when active).

Download from Www.Somanuals.com. All Manuals Search And Download.

USING THE AUDIO/VIDEO INPUT JACKS (CONTINUED)

COMPONENT VIDEO INPUTS

omponent Video Inputs

Cprovide for the highest

possible color and picture

resolution in the playback of

digital signal source material such

as with DVD players. The color

difference signals (PB, PR) and the

luminance (Y) signal are

PICTURE AND SOUND FROM PLAYBACK

OF DVD SOURCE MATERIAL

BACK OF TV

S-VIDEO

FIXED

VIDEO

FEATURE MENU

VIDEO OUT

IR BLASTER

VAR

PIP

AUDIO

PICTURE

SOURCE

CABLE

TUNING

connected and received separately

which permits for improved color

bandwidth information (not

possible when using composite

video or S-Video connections).

AUX

AUDIO OUT

INPUTS

CLOSED

CAPTIONS

CHANNEL

MEMORY

PICTURE SOURCE SELECT

PIP

ANT A/CABLE

ANT B/CABLE

75 UHF/VHF

⍀

UHF/VHF

⍀

ANT A

MORE...

ANT B

EXIT

AUX 1 VIDEO

OF 3

AUX 1 Y P

AUX 2 VIDEO

SIDE VIDEO

BEGIN

Connect the Component (Y PB

PR) VIDEO OUT jacks from the

DVD player to the (Y PB PR)

VIDEO IN(put) jacks on the TV.

POWER

EXIT

HELP

INFO

GUIDE

AUDIO OUT (L/R)

(RED/WHITE)

VIDEO OUT

S-VIDEO

OUT

VIDEO 1

AUDIO

OUT

COMPONENT

VIDEO OUTPUTS

ACC

VCR

PIP CH

OUT

SWAP

SOURCE FREEZE

Connect the AUDIO OUT

jacks R(ight) and L(eft) from the

DVD player to the AUX 1 AUDIO

IN jacks on the TV.

VIDEO 2

AUTO

SLEEP

MENU/

SELECT

STATUS/

EXIT

Select the "AUX 1 Y PB PR"

PICTURE SOURCE control on

the TV.

VOL

MUTE

DVD PLAYER

(equipped with Component Color

& Luminance Outputs)

With the FEATURES MENU on

screen, move the RED highlight

Optional Video/Audio Cables (with standard

RCA plug connectors) are available to

complete your Component Input Jack

connections. Contact your dealer, or our Parts

Information Center (1-800-851-8885) to order

any optional accessories.

100+

SURF

with the outer MENU

ring

buttons. Then press the center

MENU button to select the feature.

POSITION

PIP

Press the MENU ring and

center MENU buttons to highlight

and select (

) the AUX 1 Y PB PR

mode.

Turn the DVD player ON and

press PLAY to view the source

material playback on the TV.

STOP

SMART HELP

The description for the

component video connectors

may differ depending on the DVD

player or accessory digital source

equipment used (e.g. Y PB PR; R-Y/B-

Y/Y; Cr/Cb/Y, etc.). Although

abbreviations and terms may vary, the

letters “B” and “R” stand for the blue

and red color component signal

connectors and “Y” indicates the

luminance signal. Refer to your DVD

or digital accessory Owner’s Manual

for definitions and connection details.

Download from Www.Somanuals.com. All Manuals Search And Download.

USING THE AUDIO/VIDEO OUTPUT JACKS (CONTINUED)

AUDIO/VIDEO OUTPUTS

he Audio/Video Output jacks

Ton the TV can be used to

PICTURE AND SOUND BEING

record TV programs on VCRs

which have Audio/Video Input

jacks.

RECORDED ON VCR.

BACK OF TV

FIXED

VAR

VIDEO

FEATURE MENU

PICTURE

To record TV programs by using

the Audio/Video jacks on the TV:

VIDEO OUT

AUDIO

CABLE

PIP

PICTURE SOURCE SELECT

TUNING

IR BLASTER

SOURCE

AUX

AUDIO OUT

INPUTS

BEGIN

ANT A

CLOSED

CAPTIONS

CHANNEL

ANT B

PIP

ANT A/CABLE

MEMORY

AUX 1 VIDEO

ANT B/CABLE

⍀

UHF/VHF

⍀

UHF/VHF

Connect the VIDEO OUT jack

from the TV to the VIDEO IN jack

on the VCR.

AUX 1 Y P

AUX 2 VIDEO

EXIT

SIDE VIDEO

OF 3

VIDEO OUT

(YELLOW)

AUDIO

OUT

(RED/

EXIT

HELP

Connect the AUDIO OUT

jacks R(ight) and L(eft) from the

TV to the AUDIO IN jacks on the

VCR.

WHITE)

POWER

INFO

GUIDE

AUDIO/VIDEO INPUT

JACKS ON VCR

OUT

ANTENNA

OUT

ACC

VCR

PIP CH

VIDEO

AUDIO

SWAP

SOURCE FREEZE

Select the "ANTENNA A"

PICTURE SOURCE control on

the TV.

AUTO

SLEEP

MENU/

SELECT

STATUS/

EXIT

With the FEATURES MENU on

screen, move the RED highlight

VOL

MUTE

with the outer MENU

ring

buttons. Then press the center

MENU button to select the feature.

VCR

Select the channel on the TV that

you want to record.

100+

SURF

POSITION

PIP

Turn the VCR ON. Put a

cassette tape in the unit and place

the VCR in the RECORD mode.

STOP

SMART HELP

Remember, If the VCR

has an INPUT SELECTOR

switch, place it in the LINE or

CAMERA position.

Unattended Timer Recordings

with a VCR are possible, but not

recommended with this

connection since the TV must be

left ON for the VCR to record.

Download from Www.Somanuals.com. All Manuals Search And Download.

REMOTE CONTROL OPERATION

AUTO PICTURE

ith Auto Picture you can set a

Wnumber of video and audio

controls to your own personal

Note: For select models the AUTO PICTURE,

AUTO SOUND, and AUTO SURF features

may appear within the TV’s onscreen Menu as

Smart Picture, Smart Sound, and Smart Surf.

Use and operation of these functions will still

be the same as described within the following

sections.

preference. Once the individual

controls have been adjusted to the

levels you desire, use the list of Auto

Picture feature category titles to

quickly reselect these “personalized”

settings contained within the memory

of the TV. (See the next page for

more details on the labeling options

and use of Auto Picture.)

AUTO MENU

SMART

SOUND

AUTO

PICTURE

AUTO

SURF

AUTO PICTURE

EXIT

BEGIN

Press the AUTO button on the

remote.

SPORTS

MOVIES

W EAK SIGNAL

CARTOONS

CUSTOM

FACTORY SETTINGS

POWER

Press the center MENU button to

select the Auto Picture feature

(highlighted in RED).

to SELECT

INFO

GUIDE

EXIT

ACC

VCR

PIP CH

SWAP

SOURCE FREEZE

Press the outer MENU ring (top

and bottom) buttons to highlight the

category list for Auto Picture. Press

the center MENU button to select

(

) the desired title.

AUTO

SLEEP

MENU/

SELECT

STATUS/

EXIT

AUTO PICTURE MENU

CHANGE LABEL

COLOR

TINT

PICTURE SOURCE

BRIGHT

VOL

Press the MENU ring

buttons

MUTE

PICTURE

to choose any of the individual

controls you wish to adjust for the

Auto Picture selected title. Then

press the center Menu button to

select the highlighted control.

MORE...

OF 3

EXIT

100+

SURF

POSITION

PIP

Press the Menu ring

center Menu buttons to adjust the

selected control.

and

AUTO PICTURE MENU

SHARP

CLEARVIEW

SAP

FLESH CORRECTION

BASS

Press the STATUS button on the

remote to clear the screen after you

have finished with all of your Auto

Picture feature control adjustments.

TREBLE

MORE...

EXIT

OF 3

STOP

SMART HELP

AUTO PICTURE MENU

BALANCE

BASS BOOST

Note: Select the

“FACTORY SETTINGS”

STEREO

category to automatically return the

TV to the video and audio control

levels preset at the factory prior to

product shipment.

INCREDIBLE SURROUND

MORE...

OF 3

EXIT

Download from Www.Somanuals.com. All Manuals Search And Download.

REMOTE CONTROL OPERATION (CONTINUED)

AUTO PICTURE

ollowing your initial setup

Fadjustments (see previous page),

just select the desired Auto Picture

category in order to place the TV to

the personalized set of audio and

video control settings for that title.

AUTO MENU

AUTO

SMART

SOUND

PICTURE

AUTO

SURF

SMART PICTURE

BEGIN

Press the AUTO button on the

remote.

EXIT

SPORTS

MOVIES

W EAK SIGNAL

CARTOONS

CUSTOM

Then press the MENU button to

select the AUTO PICTURE control

feature.

FACTORY SETTINGS

POWER

to SELECT

INFO

GUIDE

EXIT

ACC

VCR

PIP CH

Press the outer MENU ring

(top and bottom) buttons with the list

of “AUTO PICTURE” categories on

the TV screen to highlight the

desired category. Then press the

center Menu button to select the

audio and video control settings for

that particular title.

SWAP

SOURCE FREEZE

AUTO

SLEEP

MENU/

SELECT

STATUS/

EXIT

VOL

MUTE

Press the STATUS button on the

remote to clear the screen.

STOP

100+

SURF

POSITION

PIP

CHANGE LABEL

he "CHANGE LABEL" control

Tcan be used to change the title of

a AUTO PICTURE setting into a

name or label that may be easier for

you to remember.

AUTO PICTURE MENU

CHANGE LABEL

COLOR

TINT

PICTURE SOURCE

BRIGHT

BEGIN

PICTURE

With the AUTO PICTURE

AUTO PICTURE LABEL

MORE...

OF 3

EXIT

“CHANGE LABEL" control on the

screen, press the outer MENU ring

(top and bottom) buttons to spell

out a new label or title for the

selected AUTO PICTURE category.

M Y O W

to SELECT

to CHANGE

POWER

INFO

GUIDE

when FINISHED

Press the outer MENU ring (left

and right) buttons to move the red

highlight to each letter space.

ACC

VCR

PIP CH

SWAP

SOURCE FREEZE

AUTO

SLEEP

MENU/

SELECT

STATUS/

EXIT

Press the STATUS button to clear

the screen when the new label is

finished.

VOL

MUTE

STOP

Download from Www.Somanuals.com. All Manuals Search And Download.

REMOTE CONTROL OPERATION (CONTINUED)

AUTO SOUND

re you tired of the sound of

Acommercials following you

throughout the house? Auto Sound

allows you to preset a desired

volume level that the TV sound will

not go above. This makes for an

even, more consistent sound by

reducing the “peaks” and “valleys”

that can occur during commercials.

Note: For select models the AUTO PICTURE,

AUTO SOUND, and AUTO SURF features

may appear within the TV’s onscreen Menu as

Smart Picture, Smart Sound, and Smart Surf.

Use and operation of these functions will still

be the same as described within the following

sections.

AUTO PICTURE

AUTO

SOUND

BEGIN

Press the AUTO button on the

remote.

PICTURE

AUTO

SURF

EXIT

With the AUTO Menu on

screen, move the RED highlight

with the outer MENU

ring

buttons. Then press the center

MENU button to select the

highlighted Auto Sound control.

POWER

AUTO SOUND

✓

INFO

GUIDE

OFF

Press the Menu ring and the

center Menu buttons to turn the

Auto Sound control ON (or OFF.)

ACC

VCR

PIP CH

DN UP

EXIT

HELP

SWAP

SOURCE FREEZE

AUTO

SLEEP

Press the STATUS button to

clear the screen when completed.

MENU/

SELECT

STATUS/

EXIT

STOP

VOL

MUTE

SMART HELP

Remember, Auto Sound

works for sound levels

100+

SURF

coming from either the

POSITION

PIP

Antenna/Cable input on the rear of

the TV (RF audio); or the

Auxiliary (VCR/AUX IN) audio

inputs.

When using a Cable Converter

Box with the Auto Sound Control

ON, the TV’s volume level may

take up to ten seconds to gradually

increase to normal listening levels

(when the TV’s first turned on).

This is considered NORMAL with

various Cable Converter Box use.

Download from Www.Somanuals.com. All Manuals Search And Download.

REMOTE CONTROL OPERATION (CONTINUED)

2-CHANNEL SURF/AUTO SURF

SMART

HELP

“list” or series of previously

Aviewed channels can be selected

with the SURF button on your remote

control. With this feature you can

easily switch between different TV

programs that currently interest you.

The Auto Surf control allows you to

set up to 10 channels in its quick

viewing “list”.

To Use 2-

Channel Surf:

AUTO PICTURE

AUTO

SOUND

PICTURE

With the 2-Channel

Surf control ON,

select the two desired

channels for viewing

with the number

buttons on the remote

control. Then press the

SURF button on the

remote to "toggle"

between the two

AUTO

SURF

EXIT

POWER

AUTO SURF

BEGIN

AU TO S U R F

✓

INFO

GUIDE

Press the AUTO button on the

remote.

2 -C H AN N EL S U R F

ACC

VCR

PIP CH

DN UP

EXIT

HELP

SWAP

SOURCE FREEZE

AUTO

With the AUTO Menu on

screen, move the RED highlight

SLEEP

selected channels.

2 CHANNEL SURF- Current and

MENU/

SELECT

STATUS/

EXIT

one previous channel in the ring.

with the outer MENU

ring

AUTO SURF - Current and up to

nine additional channels available in

the ring. Note: The Channel Surf

ring can be used with fewer than ten

channels. In this way, the number of

Surf channels can match or fit your

present viewing interests.

buttons. Then press the center

MENU button to select the

highlighted Auto Surf control.

VOL

MUTE

Press the Menu ring then the

center Menu button to select either

Auto Surf or 2-Channel Surf. (See

explanation of Surf options with the

illustration on this page.)

100+

SURF

POSITION

PIP

Press STATUS button on the

remote control to clear the screen.

STOP

SURF

HOW TO USE AUTO SURF

1 0

1 4

1 8

BEGIN

With the Auto Surf control ON

(see above), select a desired

channel for viewing. You can use

the number buttons on the remote (or

the Channel ▲▼ buttons).

to ADD

SURF

to Lis t

Note: To Delete a channel from

the Surf list just press the SURF

button to select the desired

channel. Then press the Menu

button and the channel will be

immediately dropped from the

on-screen Surf list.

1 0

1 4

1 8

POWER

Press the SURF button on the

remote. (Some channel numbers

may already appear within the Surf

channel list.)

INFO

GUIDE

to DELETE

to Lis t

ACC

VCR

SWAP

PIP CH

SOURCE FREEZE

AUTO

SLEEP

SURF

1 0

1 4

1 8

MENU/

SELECT

STATUS/

EXIT

Press the center Menu button to

"ADD" the selected channel to the

Surf list.

VOL

SURF

MUTE

Select the next desired channel and

repeat steps 2 and 3. Continue until

all desired channels are on the Surf

list.

1 0

to DELETE

1 4

1 8

to Lis t

SURF

1 0

1 4

100+

SURF

POSITION

PIP

to DELETE

to Lis t

1 8

Press the SURF button on the

remote to quickly review current

action on channels contained within

to DELETE

1 0 to Lis t

the Surf list.

STOP

Download from Www.Somanuals.com. All Manuals Search And Download.

SETTING THE TV REMOTE TO WORK ACCESSORY DEVICES

our remote control is set to

TV REMOTE

VCR/ACCESSORY

SYSTEM BUTTONS

Ywork your TV and many

infrared remote (IR) control

VCRs, Cable TV Converter

Boxes, DVD players, Home

Satellite receivers, etc.

However, an easy one-time step

may be necessary before the

remote will work with your

accessory device.

ACC

VCR

PIP CH

SWAP

SOURCE FREEZE

SMART

SLEEP

To begin, try this initial check to

see if going on to the following

section is necessary.

BEGIN

VCR

Press the VCR or

ACC(essory) System button on

the TV remote for the desired

accessory device category.

Note: The ACC(essory) system

button contains product codes

for Cable TV Converters, DVD

players, and Satellite receivers.

POWER

Point the TV remote toward

the desired accessory device and

press the POWER button.

INFO

GUIDE

SATELLITE

RECEIVER

ACC

FREEZE

VCR

SOURCE

PIP CH

SWAP

AUTO

SLEEP

Does the remote turn the

accessory device ON?

MENU/

SELECT

STATUS/

EXIT

STOP

IF YES,

and try other

CABLE CONVERTER

VOL

MUTE

function buttons on the TV

remote. If they also work the

accessory device, then the

remote is ready and no further

steps are needed.

SURF

100+

PIP

POSITION

If NO, continue...

First look up a THREE-DIGIT

remote code number for your

brand of Accessory Device before

going through the simple Direct

Access Method steps shown on

the following page.

Find your Three Digit Code

Number on pages 45-46.

SMART HELP

Remember, if more than

one number is listed, you

may have to try more than the first

three-digit code given in order to

locate your device's correct code.

Download from Www.Somanuals.com. All Manuals Search And Download.

SETTING THE TV REMOTE TO WORK ACCESSORY DEVICES

DIRECT ACCESS METHOD

ow that you have looked up

Nthe three-digit Remote

Code Number for your brand of

accessory device (see page 45-

46), you are ready to follow the

simple steps shown below.

Please read through all the

steps before beginning.

BEGIN

SATELLITE RECEIVER

POWER

Press and release the correct

VCR or ACC(essory) System

button.

INFO

GUIDE

CABLE TV CONVERTER

ACC

VCR

SWAP

PIP CH

SOURCE FREEZE

Press and release the center

DVD

Menu button.

AUTO

SLEEP

Within thirty seconds after

releasing the center Menu

button, ENTER THE THREE

DIGIT CODE NUMBER for

the desired device. The remote

is now ready to send commands

to the accessory.

MENU/

SELECT

STATUS/

EXIT

VCR

VOL

MUTE

POWER

INFO

GUIDE

Point the remote at the

accessory device. Press the

POWER button on the remote to

turn the device ON.

ACC

VCR

SOURCE FREEZE

PIP CH

SWAP

AUTO

SLEEP

MENU/

SELECT

STATUS/

EXIT

100+

SURF

VOL

MUTE

POSITION

STOP

PIP

SURF

100+

PIP

POSITION

SMART HELP

Remember, if this does

not work the first time,

repeat steps using the same remote

code number.

If after a second try the remote

does not operate your accessory

device, and there are more code

numbers listed for your brand, use

the next listed code number.

Note: For TV remote’s equipped

with a backlight option, the unit may

“blink” or flash as the three-digit

Direct Access code numbers are

entered on the keypad. (Two blinks

indicate a valid code number entry

has been accepted; one long blink

indicates an invalid code number or

the thirty second time interval for

entering code numbers has expired.)

If after repeated attempts the code

number method does not work

your accessory device, try the

"SEARCH METHOD" shown on

the following page.

Download from Www.Somanuals.com. All Manuals Search And Download.

SETTING THE REMOTE TO WORK OTHER DEVICES - SEARCH

SEARCH METHOD

our TV remote can be set to

Ywork various accessory

devices (VCRs, Cable Converters,

Satellite Receivers) by what is

called the SEARCH method.

Note: The Search Method only

works with devices equipped with

Channel Display Indicators or

capability. If the "Direct Access"

code number method (shown in

the previous section) did not set

your remote to work your

SATELLITE RECEIVER

CABLE TV

CONVERTER

⁰⁷08

VCR

⁰⁷08

accessory device, then follow the

easy steps listed below.

BEGIN

Turn ON the desired device.

Press the correct VCR or ACC

system button on the remote.

Don't let the Accessory Device

scan up more than five channels

(in Search mode).

Six Feet

(minimum)

Stand at least six feet away

from the front of the accessory

device. Point the remote toward

the unit. HOLD DOWN the

SURF and the desired System

(VCR or ACC) buttons at the

same time. KEEP HOLDING

BUTTONS DOWN.

POWER

INFO

GUIDE

ACC

VCR

PIP CH

DN UP

SWAP

SOURCE FREEZE

Watch the Channel Indicator

on the unit. Channel Numbers will

SCAN UP when the unit has been

identified. This may take up to

two minutes.

AUTO

SLEEP

MENU/

SELECT

STATUS/

EXIT

VOL

Release the SURF and System

(VCR or ACC) buttons as soon

as channel numbers start to scan

up. The code has been identified

and the remote is ready to operate

with the accessory device.

MUTE

100+

SURF

POSITION

PIP

STOP

SMART HELP

Remember, a minute or two

can seem very long, but the

code should be located within two

minutes.

Don't let the accessory device scan up

more than five channels. The remote

may pass up the right code and another

two minute search cycle will have to

be repeated.

Note: For TV remote’s equipped

with a backlight option, the unit may

“blink” or flash as the remote moves

through its product code list. Once a

product code has been identified and

the buttons on the remote are

released, the unit will blink twice.

If no channel change happens within

two minutes, repeat steps 1-4. Should

a channel change still not occur, the

remote will not work with the desired

unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

REMOTE CONTROL DIRECT ENTRY CODES FOR ACCESSORY DEVICES

VCR BRAND REMOTE CODE NO.

Admiral. . . . . . . . . . . . . . . . . . . . . . 075

Adventura . . . . . . . . . . . . . . . . . . . . 027

Aiko . . . . . . . . . . . . . . . . . . . . . . . . . 305

Aiwa. . . . . . . . . . . . . 334, 495, 027, 064

Akai . 133, 080, 076, 088, 183, 269, 068

American High . . . . . . . . . . . . . . . . 062

Asha. . . . . . . . . . . . . . . . . . . . . . . . . 267

Audiovox . . . . . . . . . . . . . . . . . . . . . 064

Beaumark. . . . . . . . . . . . . . . . . . . . . 267

Bell & Howell . . . . . . . . . . . . . . . . . 131

Broksonic . . . . 211, 148, 388, 029, 236,

. . . . . . . . . . . . . . . . . . . . . 238, 322, 506

CCE . . . . . . . . . . . . . . . . . . . . . 099, 305

Calix. . . . . . . . . . . . . . . . . . . . . . . . . 064

Canon. . . . . . . . . . . . . . . . 194, 062, 129

Capehart. . . . . . . . . . . . . . . . . . . . . . 047

Carver . . . . . . . . . . . . . . . . . . . . . . . 108

Cineral . . . . . . . . . . . . . . . . . . . . . . . 305

Citizen . . . . . . . . . . . . . . . . . . . 305, 064

Colt . . . . . . . . . . . . . . . . . . . . . . . . . 099

Craig . . . . . . . . 064, 074, 099, 267, 298

Curtis Mathes . . . . . 062, 068, 087, 189

Cybernex . . . . . . . . . . . . . . . . . 078, 267

Daewoo. . . . . . . . . . 305, 588, 047, 072

Daytron . . . . . . . . . . . . . . . . . . . . . . 047

Denon . . . . . . . . . . . . . . . . . . . . . . . 069

Dynatech . . . . . . . . . . . . . . . . . . . . . 027

Electrohome. . . . . . . . . . . . . . . . . . . 064

Electrophonic. . . . . . . . . . . . . . . . . . 064

Emerex. . . . . . . . . . . . . . . . . . . . . . . 059

Emerson . 211, 029, 148, 236, 063, 238,

. . . . 305, 321, 115, 235, 506, 088, 239,

. 588, 095, 322, 388, 537, 027, 064, 070

Fisher . . . . . . . . . . . 074, 131, 081, 093

Fuji . . . . . . . . . . . . . . . . . . . . . 060, 062

Funai . . . . . . . . . . . . . . . . . . . . . . . . 027

GE . . . . . . 062, 087, 092, 229, 075, 267

Garrard. . . . . . . . . . . . . . . . . . . . . . . 027

Go Video . . . . . . . . . 306, 259, 459, 553

GoldStar. . . . . . 064, 045, 065, 498, 507

Gradiente . . . . . . . . . . . . . 035, 027, 435

Grundig . . . . . . . . . . . . . . . . . . . . . . 222

HI-Q. . . . . . . . . . . . . . . . . . . . . . . . . 074

Harley Davidson . . . . . . . . . . . . . . . 027

Harman/Kardon . . . . . . . . 108, 065, 102

Harwood . . . . . . . . . . . . . . . . . 095, 099

Headquarter . . . . . . . . . . . . . . . . . . . 073

Hitachi. . . 069, 193, 132, 092, 423, 027,

. . . . . . . . . . . . . . . . . . . . . . . . . 068, 109

JVC . . . . . 094, 035, 233, 234, 068, 411

Jensen. . . . . . . . . . . . . . . . . . . . 068, 102

KEC . . . . . . . . . . . . . . . . . . . . 064, 305

KLH. . . . . . . . . . . . . . . . . . . . . . . . . 099

Kenwood . . . . . 411, 068, 094, 065, 073

Kodak. . . . . . . . . . . . . . . . . . . . 062, 064

LXI. . . . . . . . . . . . . . . . . . . . . . . . . . 064

VCR BRAND REMOTE CODE NO.

Lloyd's . . . . . . . . . . . . . . . . . . 027, 235

Logik . . . . . . . . . . . . . . . . . . . . . . . . 099

MEI . . . . . . . . . . . . . . . . . . . . . . . . . 062

MGA . . . . . . . . . . . . . . . . 070, 088, 267

MGN Technology . . . . . . . . . . . . . . 267

MTC . . . . . . . . . . . . . . . . . . . . 027, 267

Magnasonic . . . . . . . . . . . . . . . . . . . 305

Magnavox . . . . 062, 108, 137, 130, 027,

. . . . . . . . . . . . . . . . . . . . . . . . . 066, 176

Magnin. . . . . . . . . . . . . . . . . . . . . . . 267

Marantz . . . . . . . . . . . . . . 108, 065, 062

Marta . . . . . . . . . . . . . . . . . . . . . . . . 064

Matsushita . . . . . . . . . . . 062, 481, 189

Memorex. 131, 074, 027, 064, 062, 075,

. . . . . . . . . 267, 334, 073, 066, 828, 829

Minolta . . . . . . . . . . . . . . . . . . 132, 069

Mitsubishi . . . 070, 088, 200, 241, 102,

. . . . . . . . . . . . . . . . . 269, 094, 470, 075

Motorola . . . . . . . . . . . . . . . . . 062, 075

Multitech . . . . . . . . . . . . . . . . . 027, 099

NAD. . . . . . . . . . . . . . . . . . . . . . . . . 085

NAP . . . . 060, 061, 062, 064, 066, 069,

. . . . . . . . . . . . . . . . . . . . . . . . . 093, 132

NEC 065, 067, 068, 077, 094, 109, 131

Nikko . . . . . . . . . . . . . . . . . . . . . . . . 064

Nikon . . . . . . . . . . . . . . . . . . . . 061, 280

Noblex . . . . . . . . . . . . . . . . . . . . . . . 267

Olympus . . . . . . . . . . . . . . . . . 062, 253

Optimus. . . . . . 827, 828, 085, 829, 075,

. . . . . . . . . . . . . 064, 459, 131, 189, 481

Optonica . . . . . . . . . . . . . . . . . . . . . 089

Orion . . . . . . . . . . . . 506, 322, 029, 211

Panasonic . . . . 062, 828, 253, 104, 189,

. . . . . . . . . 405, 129, 252, 254, 273, 481

Penney 062, 267, 064, 065, 069, 067, 081

Pentax . . . . . . . . . . . . . . . 092, 069, 132

Philco. . . . . . . . . . . . . . . . 062, 506, 236

Philips . . . 108, 062, 089, 137, 803, 804

Pilot . . . . . . . . . . . . . . . . . . . . . . . . . 064

Pioneer. . . . . . . . . . . . . . . 085, 195, 094

Portland . . . . . . . . . . . . . . . . . . . . . . 047

Profitronic . . . . . . . . . . . . . . . . . . . . 267

Proscan. . . . . . . . . . . . . . . . . . . 087, 229

Protec . . . . . . . . . . . . . . . . . . . . . . . 099

Pulsar . . . . . . . . . . . . . . . . . . . . 066, 078

Quarter. . . . . . . . . . . . . . . . . . . . . . . 073

Quartz . . . . . . . . . . . . . . . . . . . . . . . 073

Quasar . . . . . . . 062, 189, 104, 481, 828

RCA . . . . 087, 176, 229, 069, 132, 092,

. . . . . . . . . 104, 133, 304, 062, 075, 267

Radio Shack . . . . . . . . . . . . . . . . . . 027

Radix . . . . . . . . . . . . . . . . . . . . . . . . 064

Randex. . . . . . . . . . . . . . . . . . . . . . . 064

Realistic . 074, 027, 131, 075, 064, 062,

. . . . . . . . . . . . . . . . . . . . . 089, 073, 093

Ricoh . . . . . . . . . . . . . . . . . . . . 061, 280

VCR BRAND REMOTE CODE NO.

Runco. . . . . . . . . . . . . . . . . . . . . . . . 066

STS . . . . . . . . . . . . . . . . . . . . . . . . . 069

Salora. . . . . . . . . . . . . . . . . . . . . . . . 102

Samsung. . . . . . . . . . 267, 072, 080, 078

Sanky . . . . . . . . . . . . . . . . . . . . 066, 075

Sansui. . . . 506, 068, 109, 298, 027, 094

Sanyo . . . . . . . . . . . . 073, 074, 131, 267

Scott. 211, 148, 238, 072, 237, 239, 070

Sears . . . . 069, 132, 081, 073, 064, 074,

. . . . . . . . . . . . . . . . . 131, 027, 062, 093

Semp . . . . . . . . . . . . . . . . . . . . . . . . 072

Sharp . . . . . . . . . . . . . . . . . . . . 075, 089

Shintom . . . . . . . . . . . . . . . . . . . . . . 099

Shogun. . . . . . . . . . . . . . . . . . . 078, 267

Signature . . . . . . . . . . . . . . . . . . . . . 062

Singer. . . . . . . . . . . . . . . . . . . . . . . . 099

Sony. 060, 061, 059, 280, 038, 062, 027

Sunpak . . . . . . . . . . . . . . . . . . . . . . . 280

Sylvania . 062, 108, 027, 130, 137, 070

Symphonic. . . . . . . . . . . . . . . . . . . . 027

TMK . . . . . . . . . . . . . . . . 063, 235, 267

Tatung . . . . . . . . . . . . . . . . . . . . . . . 068

Teac . . . . . . . . . . . . . . . . . . . . . 027, 068

Technics 062, 189, 273, 066, 087, 229, 254

Teknika . . . . . . . . . . 027, 062, 079, 064

Thomas . . . . . . . . . . . . . . . . . . . . . . 027

Toshiba . . 072, 239, 237, 093, 393, 070

Totevision . . . . . . . . . . . . . . . . 064, 267

Unitech. . . . . . . . . . . . . . . . . . . . . . . 267

Vector . . . . . . . . . . . . . . . . . . . . . . . 072

Vector Research. . . . . . . . . . . . 065, 067

Video Concepts . . . . 067, 088, 248, 072

Videosonic. . . . . . . . . . . . . . . . . . . . 267

Wards . . . 062, 075, 089, 027, 087, 074,

. . . . . 072, 267, 239, 069, 099, 176, 108

White Westinghouse . . . . . . . . . . . . 305

XR-1000 . . . . . . . . . . . . . 099, 027, 062

Yamaha . . . . . . . . . . . . . . . . . . 065, 068

Zenith. . . . . . . . 066, 060, 061, 027, 506

Continued on Next Page

Download from Www.Somanuals.com. All Manuals Search And Download.

REMOTE CONTROL DIRECT ENTRY CODES FOR ACCESSORY DEVICES

SATELLITE RECEIVER REMOTE CODE NO.

Philips . . . . . . . . . . . . . . . . .227, 749, 751

Pico . . . . . . . . . . . . . . . . . . . . . . . . . . .102

President . . . . . . . . . . . . . . . . . . . . . . .101

Primestar . . . . . . . . . . . . . . . . . .654, 388

Proscan . . . . . . . . . . . . . . . . . . . . . . . .593

RCA . . . . . . . . . . . . . . . . . .593, 170, 882

Radio Shack . . . . . . . . . . . . . . . . . . . .593

Ramsey . . . . . . . . . . . . . . . . . . . . . . . .102

Realistic . . . . . . . . . . . . . . . . . . . . . . . .079

STS . . . . . . . . . . . . . . . . . . . . . . .237, 068

Sony . . . . . . . . . . . . . . . . . . . . . . . . . .666

Star Choice . . . . . . . . . . . . . . . . . . . . .896

Star Trak . . . . . . . . . . . . . . . . . . . . . . .207

Toshiba . . . . . . . . . . . . . . . .109, 817, 088

Uniden .265, 397, 079, 101, 751, 103, 749

Zenith . . . . . . . . . . . . . 091, 088, 883, 272

CABLE CONVERTER REMOTE CODE NO.

ABC . . . . . .030, 035, 038, 040, 028, 034,

. . . . . . . . . . . . . . . . . . . . . . . . . . .041, 044

Allegro . . . . . . . . . . . . . . . . . . . .180, 342

Antronix . . . . . . . . . . . . . . . . . . .049, 234

Archer . . . . . . . . . . . . .049, 180, 234, 824

BBT . . . . . . . . . . . . . . . . . . . . . . . . . .294

Belcor . . . . . . . . . . . . . . . . . . . . . . . . .083

Bell & Howell . . . . . . . . . . . . . . . . . .041

Cable Star . . . . . . . . . . . . . . . . . . . . . . 083

Cabletenna . . . . . . . . . . . . . . . . . . . . .049

Cableview . . . . . . . . . . . . . . . . . . . . . .049

Century . . . . . . . . . . . . . . . . . . . . . . . .180

Citizen . . . . . . . . . . . . . . . . . . . .180, 342

Colour Voice . . . . . . . . . . . . . . . .052, 058

Comtronics . . . . . . . . . . . . . . . . . . . . .067

Contec . . . . . . . . . . . . . . . . . . . . . . . . 046

Digi . . . . . . . . . . . . . . . . . . . . . . . . . . .664

Eastern . . . . . . . . . . . . . . . . . . . . . . . . 029

Emerson . . . . . . . . . . . . . . . . . . . . . . .824

Everquest . . . . . . . . . . . . . . . . . .042, 067

Focus . . . . . . . . . . . . . . . . . . . . . . . . .427

GC Electronics . . . . . . . . . . . . . .083, 234

Garrard . . . . . . . . . . . . . . . . . . . . . . . .180

Gemini . . . . . . . . . . . . . . . . . . . . . . . . .042

General Instrument . . .303, 503, 038, 837

GoldStar . . . . . . . . . . . . . . . . . . 067, 171

Goodmind . . . . . . . . . . . . . . . . . . . . . .824

Hamlin . . . . . . . . . . . . .047, 036, 286, 061

Hitachi . . . . . . . . . . . . . . . . . . . . . . . . 038

Hytex . . . . . . . . . . . . . . . . . . . . . . . . . 034

Jasco . . . . . . . . . . . . . . . . . .042, 180, 342

Jerrold . . . . .030, 039, 303, 038, 041, 042,

. . . . . . . . . . . . . . . . . . . . . . .051, 503, 837

Linsay . . . . . . . . . . . . . . . . . . . . . . . . .467

Magnavox . . . . . . . . . . . . . . . . . .054, 041

Memorex . . . . . . . . . . . . . . . . . . . . . . 027

Movie Time . . . . . . . . . . . . . . . . .090, 183

NAP . . . . . . . . . . . . . . . . . . . . . . . . . .034

NSC . . . . . . . . . . . . . . . . . . . . . . .183, 090

Novaplex . . . . . . . . . . . . . . . . . . . . . . .645

Oak . . . . . . . . . . . . . . . . . . . . . . .046, 034

Optimus . . . . . . . . . . . . . . . . . . . . . . . 048

Panasonic . . . . . . . . . . . . . . 048, 134, 027

Panther . . . . . . . . . . . . . . . . . . . . . . . .664

Paragon . . . . . . . . . . . . . . . . . . . . . . . .027

Philips . . . . . . . . . . . . 052, 058, 054, 180

Pioneer . . . . . . . . . . . . . . . .171, 050, 560

Popular Mechanics . . . . . . . . . . . . . . .427

Proscan . . . . . . . . . . . . . . . . . . . . . . . .048

Pulsar . . . . . . . . . . . . . . . . . . . . . . . . .027

Quasar . . . . . . . . . . . . . . . . . . . . . . . . .027

RCA . . . . . . . . . . . . . . . . . . . . . . . . . .048

Radio Shack . . . . . . . .824, 042, 342, 847

Realistic . . . . . . . . . . . . . . . . . . . . . . . .234

Recoton . . . . . . . . . . . . . . . . . . . . . . . .427

Regal . . . . . . . . . . . . . . . . . . . . . .286, 047

Regency . . . . . . . . . . . . . . . . . . . . . . . .029

Rembrandt . . . . . . . . . . . . . . . . . . . . . .038

Runco . . . . . . . . . . . . . . . . . . . . . . . . .027

CABLE CONVERTER REMOTE CODE NO.

SL Marx . . . . . . . . . . . . . . . . . . . . . . . 067

Samsung . . . . . . . . . . . . . . . . . . . 067, 171

Scientific Atlanta . . . . . . . .035, 044, 504

Seam . . . . . . . . . . . . . . . . . . . . . . . . . .537

Signal . . . . . . . . . . . . . . . . . . . . . 042, 067

Signature . . . . . . . . . . . . . . . . . . . . . .038

Sprucer . . . . . . . . . . . . . . . . . . . . . . . .048

Starcom . . . . . . . . . . . . . . . . . . .030, 042

Stargate . . . . . . . . . . . . . . . 067, 042, 824

Starquest . . . . . . . . . . . . . . . . . . . . . . . 042

Sylvania . . . . . . . . . . . . . . . . . . . . . . . 028

TFC . . . . . . . . . . . . . . . . . . . . . . . . . . .337

TV86 . . . . . . . . . . . . . . . . . . . . . . . . . 090

Tandy . . . . . . . . . . . . . . . . . . . . . . . . .285

TeleCaption . . . . . . . . . . . . . . . . . . . .248

Teleview . . . . . . . . . . . . . . . . . . . . . . . 067

Texscan . . . . . . . . . . . . . . . . . . . . . . . 028

Timeless . . . . . . . . . . . . . . . . . . . . . . .445

Tocom . . . . . . . . . . . . . . . . . . . . .039, 040

Toshiba . . . . . . . . . . . . . . . . . . . . . . . . 027

Tusa . . . . . . . . . . . . . . . . . . . . . . . . . . .042

Unika . . . . . . . . . . . . . . . . . 234, 180, 049

United Artists . . . . . . . . . . . . . . . . . . . 034

Universal . . . . . . .234, 049, 083, 218, 180

Viewstar . . . . . . . . . . . . . . .285, 054, 090

Zenith . . . . 027, 552, 081, 035, 042, 234

Zentek . . . . . . . . . . . . . . . . . . . . . . . . . 427

DVD BRAND REMOTE CODE NO.

Harman/Kardon. . . . . . . . . . . . . . . . . . 871

JVC . . . . . . . . . . . . . . . . . . . . . . . . . . . 868

Kenwood . . . . . . . . . . . . . . . . . . . . . . . 865

Magnavox . . . . . . . . . . . . . . . . . . . . . . 860

Mitsubishi . . . . . . . . . . . . . . . . . . . . . . 861

Onkyo . . . . . . . . . . . . . . . . . . . . . . . . . 860

Optimus. . . . . . . . . . . . . . . . . . . . . . . . 863

Panasonic . . . . . . . . . . . . . . . . . . . . . . 859

Philips . . . . . . . . . . . . . . . . . . . . . 866, 860

Pioneer . . . . . . . . . . . . . . . . . . . . 863, 869

Proscan . . . . . . . . . . . . . . . . . . . . . . . . 862

RCA . . . . . . . . . . . . . . . . . . . . . . . . . . 862

Samsung . . . . . . . . . . . . . . . . . . . . . . . 870

Sony . . . . . . . . . . . . . . . . . . . . . . . . . . 864

Technics . . . . . . . . . . . . . . . . . . . . . . . 859

Toshiba . . . . . . . . . . . . . . . . . . . . . . . . 860

Yamaha . . . . . . . . . . . . . . . . . . . . 867, 859

Zenith . . . . . . . . . . . . . . . . . . . . . 872, 860

SATELLITE RECEIVER REMOTE CODE NO.

AlphaStar . . . . . . . . . . . . . . . . . . . . . .799

Amplica . . . . . . . . . . . . . . . . . . . . . . . 099

Amway . . . . . . . . . . . . . . . . . . . . . . . .102

Astro Industries . . . . . . . . . . . . . . . . . .122

BSR . . . . . . . . . . . . . . . . . . . . . . . . . . .122

Capetronic . . . . . . . . . . . . . . . . . . . . . .122

Channel Maste . . . . . . . . . . . . . . 045, 239

Chaparral . . . . . . . . . . . . . . 080, 236, 243

Curtis Mathes . . . . . . . . . . . . . . . 088, 099

DX Antenna . . . . . . . . . . . . . . . . . . . . 068

Drake . . . . . . . . . . . . . 091, 272, 045, 176

Echostar . . . . . . . .307, 802, 175, 186, 296

Expressvu . . . . . . . . . . . . . . . . . . . . . .802

General Instrument . . . . . . .388, 896, 654

HTS . . . . . . . . . . . . . . . . . . . . . . . . . . .802

Hitachi . . . . . . . . . . . . . . . . . . . . . . . . 846

Homecable . . . . . . . . . . . . . . . . . . . . .265

Hughes Network Systems . . . . . . . . . .776

Hytek . . . . . . . . . . . . . . . . . . . . . . . . . .122

IQ . . . . . . . . . . . . . . . . . . . . . . . . . . . .237

IQ Prism . . . . . . . . . . . . . . . . . . . . . . .237

JVC . . . . . . . . . . . . . . . . . . . . . . . . . . .802

Janeil . . . . . . . . . . . . . . . . . . . . . . . . . .179

Jerrold . . . . . . . . . . . . . . . . . . . . .388, 654

Legend . . . . . . . . . . . . . . . . . . . . . . . .296

Macom . . . . . . . . . . . . . . . . . . . .088, 045

Magnavox . . . . . . . . . . . . . . . . . .749, 751

Memorex . . . . . . . . . . . . . . . . . .296, 751

Next Level . . . . . . . . . . . . . . . . . . . . . .896

Panasonic . . . . . . . . . . . . . . . . . .179, 728

LASER DISC REMOTE CODE NO.

Aiwa . . . . . . . . . . . . . . . . . . . . . . . . . .855

Carver . . . . . . . . . . . . . . . . .853, 850, 858

Denon . . . . . . . . . . . . . . . . . . . . . 851, 849

Disco Vision . . . . . . . . . . . . . . . . . . . .848

Funai . . . . . . . . . . . . . . . . . . . . . . . . . .855

Harman/Kardon . . . . . . . . . . . . . . . . . .853

Hitachi . . . . . . . . . . . . . . . . . . . . . . . . .848

Magnavox . . . . . . . . . . . . . . . . . .853, 857

Marantz . . . . . . . . . . . . . . . . . . . .853, 850

Mitsubishi . . . . . . . . . . . . . . . . . . . . . .849

NAD . . . . . . . . . . . . . . . . . . . . . . . . . .849

Panasonic . . . . . . . . . . . . . . . . . . . . . .856

Philips . . . . . . . . . . . . . . . . . . . . . 853, 850

Pioneer . . . . . . . . . . . . . . . . . . . .849, 848

Quasar . . . . . . . . . . . . . . . . . . . . . . . . .856

Realistic . . . . . . . . . . . . . . . . . . . . . . . .855

Sam . . . . . . . . . . . . . . . . . . . . . . . . . . . 848

Sony . . . . . . . . . . . . . . . . . . . . . . 854, 852

Technics . . . . . . . . . . . . . . . . . . . . . . . 856

Theta Digital . . . . . . . . . . . . . . . . . . . 853

Yamaha . . . . . . . . . . . . . . . . . . . . . . .857

Download from Www.Somanuals.com. All Manuals Search And Download.

USING THE REMOTE'S VCR BUTTONS

hen using the TV remote

Wwith a VCR, first make

certain it is set to control your

VCR ( by the REMOTE CODE or

SEARCH method - see earlier

sections).

BEGIN

Press the VCR System

button on the remote.

POWER

Power Button

Press to turn the VCR ON and OFF.

Point the top of the remote

toward the front of the VCR

(remote sensor window) when

pressing buttons.

INFO

GUIDE

VCR System Button

Press to send remote commands to

the VCR.

ACC

VCR

PIP CH

DN UP

STOP

SWAP

SOURCE FREEZE

Channel Scan Buttons

Press to scan up or down through

VCR channel numbers.

AUTO

SLEEP

TV-VCR (AV) Button

Press to the VCR position ("VCR"

indicator on the VCR will light) to

view the playback of a tape. Press

again to place in the TV position

("VCR" indicator on the VCR will go

OFF) to view one program while

recording another program.

When used with the television the AV

button works as a source button. Each

press cycles the TV between the

AUX(iliary) Input modes, ANT A/B

inputs, and the the last view channel. It

is a quick one-button way to select

these channels and modes (without

directly entering the TV's Menu

system.)

Number Buttons

Press buttons for direct VCR channel

selections.

STATUS/

EXIT

MENU/

SELECT

Play Button

Press to playback a tape. Hold down

after pressing the RECORD button to

start a recording.

VOL

MUTE

Pause Button

Press to temporarily stop the tape dur-

ing a playback, or recording. Press

again to release Pause.

Stop Button

Press to stop the tape.

Status/Exit Button

Press to clear the screen of menu

controls or display a feature operation

status screen.

Fast Forward Button

100+

SURF

Press to rapidly advance the tape. For

some VCRs you may need to press

STOP first then FF. In Playback

mode hold button down to view the

picture moving rapidly in the forward

direction.

VCR

PLUS+

REC

RESET

CLEAR

Record/VCR Plus+ Button

Press the RECORD button to start a

recording (with some VCR models

you may also need to press the PLAY

button on the remote to begin

recording). Also use this button to set

timer recordings with the VCR Plus+

programming system.

SMART HELP

Clear Button

Press to erase incorrect entries or data

when programming VCR functions.

Remember, the VCR

buttons on the remote will

not operate your VCR if those

features are not already found on

your VCR remote control.

Open the remote control VCR button

compartment with the pull tabs located

on both sides of the hinged door or lid.

Rewind Button

Press to rewind tapes. For some VCRs

you may need to press STOP button

first then REWIND. In playback

mode, hold button down to view

picture moving rapidly in reverse.

Note: All VCR functions

(particularly Search, Rewind, Fast

Forward, etc.) will operate the

same as with the original VCR

remote control provided with the

VCR.

Download from Www.Somanuals.com. All Manuals Search And Download.

HOW TO USE THE PICTURE-IN-PICTURE (PIP) FEATURE

icture-in-Picture (PIP) is the

Pshowing of two pictures on the

TV screen at the same time. (One

main screen picture and one small

inset picture - or PIP). For your

ease and convenience this TV has

two separate inputs (ANTenna A

and ANTenna B) for your home’s

Antenna and/or Cable TV system

signal.

- PIP WINDOW -

Display signal supplied

primarily through ANT

B Input on rear of TV.

- MAIN SCREEN -

Display signal supplied

primarily through

ANT A Input on rear

of TV.

The ANT A input is primarily for

the TV’s main screen picture.

The ANT B input is provided as a

second, dedicated source option

for the TV’s PIP “window” and

its feature operations. The signal

connected to the ANT B input can

be either a Split Signal Input (as

described in the section on this

page), or another type of external

signal source (such as a satellite

dish system, additional home

antenna, video accessory, etc.).

VOL

Combination VHF/UHF Antenna

300 to 75Ω Adapter

(483521827003)

BACK OF TV

Twin Lead

Wire

- Outdoor or Indoor Antenna -

receives normal broadcast channels

2-13 (VHF) and 14-69 (UHF).

See the following steps on how

channels connected to the

Round Cable

75Ω Ohm

–

SUBWOOFER

S-VIDEO

FIXED

VIDEO

VIDEO OUT

VAR

AUDIO

PIP

AUDIO OUT

AUX

INPUTS

ANT A/CABLE

75 UHF/VHF

PIP

ANT B/CABLE

75 UHF/VHF

⍀

ANT(enna) B Input can be shown

and used within the PIP window:

FIXED

VAR

VIDEO

VIDEO OUT

IR BLASTER

BEGIN

ANT(enna) A

Input

AUDIO

PIP

AUX

AUDIO OUT

Connect your Antenna or

Cable TV signal to the single 75

ohm INPUT plug on a two-way

Signal Splitter (not supplied).

INPUTS

PIP

ANT A/CABLE

75 UHF/VHF

ANT B/CABLE

⍀

UHF/VHF

ANT(enna) B

Input

OPTIONAL TWO-WAY

SIGNAL SPLITTER

Connect two lengths of RF

Coaxial Cable (F-type connectors

on both ends) to the two OUTPUT

plugs on the two-way Signal

Splitter.

(single 75ohm Input to twin 75 ohm Outputs -

optional RF Coaxial connecting cables also

required)

Note: The purpose of the ANT B input is to

provide an easily connected, dedicated picture

source for PIP feature use. Other signal source

options (such as a satellite dish system, additional

external antenna, VCR, or Video Game) could also

be connected and displayed on the TV’s PIP screen

window through the use of the ANT B input.

Connect the twin OUTPUT

plugs on the Signal Splitter to the

ANT A and ANT B Inputs on the

rear of the TV.

Cable TV Signal

O U T

I N

Round Cable

75Ω Ohm

Cable TV

Company

continue to next page

SMART HELP

See the Set-Up Guide also provided with

your TV set for further Cable TV connection

options and accessories.

For other possible PIP

connections see page 53 for

the "More PIP Connections"

section.

If you need any accessories or

parts to complete the described

PIP connections, contact your

dealer, or our Parts Information

Center at (1-800-851-8885) for

details.

Download from Www.Somanuals.com. All Manuals Search And Download.

ow that you have completed

Nthe required connections on

the previous page you are ready to

follow the simple steps shown

below.

- PIP WINDOW -

- MAIN SCREEN -

PIP SOURCE SELECT SET TO "ANT B"

PIP SOURCE SELECT

Turn the TV ON.

ANT A

ANT B

Place the TV's PIP SOURCE

SELECT control to "ANT B"-

AUX 1 VIDEO

AUX 2 VIDEO

SIDE VIDEO

•

Press the PIP Source button on

the remote to select “ANT B”

as the PIP source, (or use the

FEATURES MENU 4 of 5

control screen to select the PIP

Source Select item as ANT B.

EXIT

HELP

POWER

INFO

GUIDE

ACC

FREEZE

VCR

SOURCE

Also place the TV's Main

PIP CH

AUTO

SWAP

MENU/

SELECT

SLEEP

screen PICTURE SOURCE

SELECT control to "ANT A"-

PICTURE SOURCE SELECT

STATUS/

EXIT

ANT A

ANT B

AUX 1 VIDEO

MUTE

VOL

•

See the Picture Source option

FEATURES MENU (1 of 5).

AUX 1 Y P

SURF

AUX 2 VIDEO

SIDE VIDEO

100+

PIP

Press the STATUS button to

clear the screen when the above

Menu items have been set.

POSITION

EXIT

HELP

Press the PIP ON/OFF button

on the remote.

MAIN PICTURE SOURCE SELECT SET

TO "ANT A"

The PIP window should show in

one of the corners of the TV

screen.

BLACK frame around the PIP window appears

when the ANT A Input is on the Main screen.

WHITE frame around the PIP window appears

when the ANT B Input is on the Main screen.

Press the SWAP buttons on

the remote to move the ANT B

and ANT A Input pictures

between the PIP window and

Main screen.

PRESS

SWAP

WXY Z

PIP: 8

A NT B

PIP: 5

button on the

remote to switch

programs shown

on the Main

screen and in the

PIP window.

Use the PIP CH(annel) Up and

Down buttons to select desired

programs for viewing in the PIP

window. Program Sound occurs

with the channels displayed on the

Main screen.

STEREO

12:34

•

Main Screen is CH 5 from ANT A input.

PIP is CH 8 from ANT B input

•

Main Screen shows CH 8 from ANT B input.

PIP is CH 5 from ANT A input.

SMART HELP

Remember, if you see the

same picture on the main

FIXED

VAR

PIP

PIP AUDIO

OUTPUT will

be monaural

VIDEO OUT

NOTE: Sound for TV programs

displayed in the PIP window can also

be heard through the use of PIP

AUDIO OUT jacks on the rear of the

TV. Just connect the TV’s Left/Right

PIP AUDIO OUTPUTs to the correct

AUX(iliary) Inputs on an external

stereo sound system (through which

the PIP audio will be played).

screen and in the PIP window,

check to be sure the TV's PIP

Source Select and Main screen

Picture Source select are set for

ANT B and ANT A respectively.

IR BLASTER

AUDIO OUT

ANT A/CABLE

75 UHF/VHF

⍀

(mono) when

both ANT A and

ANT B are being

used for normal

PIP operation.

See page 31 for

details on other

stereo sound

REAR OF TV

AUX/TV INPUT

PHONO INPUT

See the following page on how to

operate other PIP features with the

TV’s remote control.

uses for the PIP

Audio Output

jacks.

Download from Www.Somanuals.com. All Manuals Search And Download.

USING PIP WITH THE REMOTE CONTROL

SMART

HELP

y using the PIP buttons on the

Bremote the PIP picture can be

moved and swapped with the main

screen. The main screen picture

can also be frozen in the PIP

window.

Remember,

if the TV’s Main

screen picture is

being supplied by

an AUX VIDEO

connected VCR (or

other external

BEGIN

Press the PIP ON/OFF button

to show the PIP picture.

accessory source);

and then both the

TV and VCR are

turned OFF, a blank

screen will appear

when the TV is

turned back ON

again.

If this happens, just

press the CH(annel)

▲ or ▼ buttons to

select a TV station

for normal viewing.

PIP appears in a corner of TV

screen. Press PIP ON/OFF again to

remove PIP from the main screen.

1. PIP ON / OFF

Press the PIP POSITION

button to move the PIP picture

(from corner-to-corner on the TV

screen.)

2. PIP POSITION

This feature allows you to move

PIP and avoid blocking off any

main screen action.

With PIP on the TV screen,

press the SWAP button to swap

the main screen picture with the

PIP picture. See "Smart Help"

note on this page.

3. PIP SWAP

Press FREEZE to hold the

current MAIN screen picture in

the PIP window (Main picture is

still active).

PIP SOURCE SELECT

ANT

AUX

VIDEO

AUX

SIDE VIDEO

4. PIP FREEZE

If PIP is currently OFF, the PIP

window will automatically appear.

POWER

Press FRZ repeatedly to update

the frozen PIP with current

pictures from the Main screen.

GUIDE

INFO

LIGHT

ACC

VCR

PIP CH

5. PIP SOURCE & PIP CH UP/DN

SWAP

SOURCE FREEZE

You cannot reposition a frozen

PIP picture.

AUTO

SLEEP

MENU/

SELECT

STATUS/

EXIT

Press the PIP ON/OFF button to

drop the frozen PIP picture from

the screen.

VOL

MUTE

Press the PIP SOURCE

button to change the signal input

source (ANT B, etc.) for the PIP

window shown on the TV screen.

100+

SURF

POSITION

PIP

Press the PIP CH(annel) Up and

Down (DN) buttons to select

channels shown within the PIP

window (when an antenna/cable

signal source is connected for use

with PIP).

STOP

Download from Www.Somanuals.com. All Manuals Search And Download.

SELECTING THE PICTURE SOURCE FOR PIP

PIP SOURCE

he picture for the PIP window

Tcan come through either the

ANT(enna) A / B Inputs or the AUX

Video Inputs (on the rear and side

of the TV). PIP Picture Source

simply tells the TV which one of

these sources it is to show in the

PIP window.

FEATURE MENU

PICTURE

CABLE

TUNING

SOURCE

MAIN MENU

PICTURE

CLOSED

CAPTIONS

CHANNEL

MEMORY

SOUND

HELP

MORE...

OF 5

EXIT

BEGIN

FEATURES

Select PIP SOURCE control.

1 ST TIME SETUP

EXIT

With FEATURES MENU (4 of 5)

on screen, move the RED highlight

with the outer MENU

buttons. Then press the center

ring

FEATURE MENU

SET CLOCK &

ALARM TIMER

POWER

MENU button to select the feature.

SLEEP

TIMER

Note: The remote control’s PIP

SOURCE button can also be used

to quickly select picture source

inputs on the rear of the TV for the

PIP window.

INFO

GUIDE

HALF HOUR

REMINDER

CHANNEL

DISPLAY

ACC

VCR

PIP CH

MORE...

OF 5

EXIT

SWAP

SOURCE FREEZE

AUTO

SLEEP

Press the MENU ring and

center MENU buttons to highlight

and select the desired (

) PIP

Picture Source.

MENU/

SELECT

STATUS/

EXIT

FEATURE MENU

VOL

MUTE

PARENTAL

CONTROL

ANT A or B- for a picture signal

coming from either the ANT(enna)

A or B Input plug on the TV.

CHANNEL

LABELS

LANGUAGE

SELECTION

AUX 1 (or 2) VIDEO - for a

picture signal coming from the

AUX 1 (or 2) VIDEO IN jack on

the rear of the TV.

EXIT

MORE...

100+

SURF

OF 5

POSITION

PIP

SIDE VIDEO- for a picture signal

coming from the SIDE VIDEO

Input jack on the right side of the

TV cabinet.

FEATURE MENU

PIP

Press the STATUS button to

clear the screen.

SIZE

SOURCE

PIP

POSITION

STOP

EXIT

MORE...

OF 5

SMART HELP

Remember, the PIP

window will be blank unless

a signal is connected to the

selected PIP Picture Source (ANT

B, AUX VIDEO, SIDE VIDEO,

etc.) on the set.

PIP SOURCE SELECT

ANT A

ANT B

AUX 1 VIDEO

AUX 2 VIDEO

SIDE VIDEO

If you see the same picture on the

main screen and in the PIP

EXIT

HELP

window, you may have the Main

Screen and PIP window set to the

same video input source.

Download from Www.Somanuals.com. All Manuals Search And Download.

ADJUSTING PICTURE-IN-PICTURE COLOR AND TINT

PIP COLOR / PIP TINT

he Picture-In-Picture (PIP)

TColor and Tint controls are

used to make fine tune adjustments

to the color settings for PIP (when

it is shown on the TV screen).

BEGIN

FEATURE MENU

PICTURE

CABLE

SOURCE

TUNING

Select PIP COLOR (or PIP

TINT) control.

MAIN MENU

PICTURE

CLOSED

CAPTIONS

CHANNEL

MEMORY

SOUND

HELP

With FEATURES MENU (5 of 5)

on screen, move the RED highlight

FEATURES

FEATURE MENU

MORE...

OF 5

EXIT

with the outer MENU

ring

SET CLOCK &

ALARM TIMER

1 ST TIME SETUP

EXIT

SLEEP

TIMER

buttons. Then press the center

MENU button to select the feature.

HALF HOUR

REMINDER

CHANNEL

DISPLAY

Press the outer MENU ring

buttons to move the RED

MORE...

OF 5

EXIT

POWER

highlight. Press the MENU button

to turn (

) the PIP COLOR or

TINT control ON.

INFO

GUIDE

FEATURE MENU

ACC

VCR

PIP CH

SWAP

SOURCE FREEZE

PARENTAL

CONTROL

CHANNEL

LABELS

The PIP automatically comes on to

show the PIP window on the TV

screen.

AUTO

SLEEP

ACCESSORY

RF SW ITCH

MENU/

SELECT

STATUS/

EXIT

FEATURE MENU

EXIT

MORE...

Press the outer Menu ring

(Left and Right) buttons to adjust

the PIP for Color (or Tint) levels

you prefer.

OF 5

PIP

SIZE

PIP

SOURCE

VOL

MUTE

PIP

POSITION

EXIT

MORE...

Press the STATUS button to

clear the screen.

OF 5

100+

SURF

STOP

POSITION

PIP

FEATURE MENU

PIP

SMART HELP

COLOR

PIP

TINT

Remember. Although

there are separate COLOR

and TINT controls for PIP, the

adjustment levels for these

EXIT

MORE...

OF 5

controls depend on the TV's main

picture. For example: If the main

screen is showing a black and

white picture, PIP would also be

in black and white (even though

its source is in color).

PIP COLOR

MIN

MAX

EXIT

HELP

PIP TINT

RED

GRN

EXIT

HELP

Download from Www.Somanuals.com. All Manuals Search And Download.

MORE PIP CONNECTIONS

SMART

HELP

he following example is for an

Talternative PIP connection

hookup using an external Cable

Converter Box and a VCR (as the

picture source for the PIP

window).

Remember

to use the Cable TV

Converter Box to

select channels for

PIP, the VCR must

be set to the same

channel as the

BEGIN

First use an optional signal

splitter and connect the original

cable TV signal to both the

CABLE IN on the Cable Converter

and the ANTENNA A plug on the

rear of the TV.

REAR OF TV

FIXED

VIDEO

channel selection

switch on the rear of

the Cable Converter

(either channel 3 or

VIDEO OUT

VAR

AUDIO

PIP

IR BLASTER

AUX 1

AUX 2

AUDIO OUT

INPUTS

4).

PIP

ANT B/CABLE

75 ⍀ UHF/VHF

ANT A/CABLE

75 ⍀ UHF/VHF

–

SUBWOOFER

S-VIDEO

FIXED

VIDEO

Connect the CABLE OUT on

the Converter to the ANT. IN on

the VCR.

VIDEO OUT

VAR

AUDIO

PIP

AUDIO OUT

AUX

INPUTS

PIP

ANT B/CABLE

ANT A/CABLE

75 UHF/VHF

⍀

UHF/VHF

Connect the VIDEO OUT jack

on the VCR to the VIDEO IN

jack on the TV.

The ANTENNA A signal input supplies the TV’s

Main screen picture, and the AUX 1 VIDEO Input

connection from the VCR serves as the picture

source for PIP. Be sure to set the TV’s PIP

SOURCE SELECT control to the “AUX 1

VIDEO” mode in order to display the Audio/Video

Input signals within the PIP window.

Also connect the AUDIO OUT (R

and L) jacks from the VCR to the

AUDIO IN jacks on the TV.

STOP

AUDIO VIDEO CABLES

(RCA Plug Cables - optional)

OUT

VIDEO

OUT

ANTENNA

OUT

AUDIO

SIGNAL

SPLITTER

ANTENNA

Contact the Parts Information

Center 1 800 851-8885

to order any optional accessories

VCR

CABLE OUT

CABLE IN

CABLE TV CONVERTER

Download from Www.Somanuals.com. All Manuals Search And Download.

TV HELP MENU

he on screen HELP menu

Toffers both Operating Tips and

a list of Glossary definitions for

different features on your TV.

These items are given to provide

you with more information and

details on a select group of feature

operations.

MAIN MENU

HELP MENU

OPERATING TIPS

GLOSSARY

BEGIN

PICTURE

SOUND

HELP

For Problem s

Select "HELP" on the TV's

Main Menu.

FEATURES

Of TV Features

1 ST TIME SETUP

EXIT

Press the outer Menu

ring

buttons to move UP/DOWN and

from SIDE-TO-SIDE within the

list of on-screen features.

EXIT

Press the center MENU button to

select the highlighted "HELP"

item.

POWER

INFO

GUIDE

OPERATING TIPS

USING OPERATING TIPS

ACC

Press the MENU ring and then

the center MENU buttons to

select either the OPERATING

TIPS or GLOSSARY item.

VCR

PIP CH

•

Us e the ᮡ and

ᮢ

keys on

SWAP

SOURCE FREEZE

your remote to s croll

through the different

help items .

AUTO

SLEEP

• Us e the "M" key on

your remote will go back

to the help menu.

MENU/

SELECT

STATUS/

EXIT

STOP

VOL

MUTE

FOLLOW THE ON SCREEN

DIRECTIONS TO VIEW

OPERATING TIPS

100+

SURF

POSITION

PIP

Download from Www.Somanuals.com. All Manuals Search And Download.

TIPS IF SOMETHING ISN'T WORKING

CAUTION: A video source (such as a video game, Compact Disc Interactive - CDI, or

TV information channel) which shows a constant non-moving pattern on the TV screen,

can cause picture tube damage. When your TV is continuously used with such a source

the pattern of the non-moving portion of the game (CDI, etc.) could leave an image

permanently on the picture tube. When not in use, turn the video source OFF. Regularly

alternate the use of such video sources with normal TV viewing.

lease make these simple

Pchecks before calling for

service. These tips can save you

time and money since charges for

TV installation and adjustment of

customer controls are not

covered under your warranty.

• Check the TV power cord. Unplug the TV, wait 1 minute, then reinsert plug into outlet

and push POWER button again.

No Power

• Check to be sure outlet is not on a wall switch.

• Check antenna connections on the rear of the TV. Are they properly secured to the

antenna plug on the TV?

• Check the CABLE TUNING control for correct position.

• Check PICTURE SOURCE control for correct position ANT A or B; AUX 1/2

VIDEO; AUX Y PB PR; or SIDE VIDEO position without a signal source will

result in a blank screen.

No Picture

• Check the CLOSED CAPTIONS control. Some TEXT modes could block the screen.

• Check the VOLUME and MUTE buttons on the TV and remote.

• Check the TV SPEAKER NORMAL/OFF sound control for the correct position.

• If attempting auxiliary equipment hook-ups, check audio jack connections and that the

auxiliary equipment is on and in the proper operating modes.

No Sound

• Check VCR-ACC-TV “System” buttons on the remote. Press the remote’s TV System

button to send commands to the TV; VCR System to sent to VCR; etc.

• Check batteries. Replace with AA Heavy Duty (Zinc Chloride) or Alkaline batteries

if necessary.

Remote Does Not

Work

• Clean the remote and the remote sensor window on the TV.

TV Displays Wrong

Channel or No

Channels Above 13

• Repeat channel selection.

• Add desired channel numbers (ADD/DELETE CHANNELS control) into TV memory.

• Check CABLE TUNING control for correct position.

This TV is equipped with protective circuitry that shuts the TV off in case of moderate power surges. Should this occur turn the

TV back on by pressing the POWER button once or twice, or unplug and then replug the power cord at the AC outlet.

This feature is NOT designed to prevent damage due to high power surges such as those caused by lightning, which is not covered

by your warranty.

Cleaning and Care

• To avoid possible shock hazard be sure the TV is unplugged from the electrical outlet before cleaning.

• When cleaning the TV screen take care not to scratch or damage the screen surface (avoid wearing jewelry or using

anything abrasive- do not use household cleaners). Wipe the front screen with a clean cloth dampened with water. Use

even, easy, vertical strokes when cleaning.

• Specially designed screen cleaning kits are also available which contain anti-static cleaners and cloths designed to get

into the ridges of the TV screen. If interested, ask your dealer about an optional Projection TV Screen Cleaning Kit or

call our toll-free Accessory Parts ordering number 1-800-851-8885.

• Gently wipe the cabinet surfaces with a clean cloth or sponge dampened in a solution of cool clear water and a mild soap

or detergent. Use a clean dry cloth to dry the wiped surfaces.

• Occasionally vacuum the ventilation holes or slots in the cabinet back.

• Never use thinners, insecticide sprays, or other chemicals on or near the cabinet, as they might cause permanent marring

of the cabinet finish.

Download from Www.Somanuals.com. All Manuals Search And Download.

GLOSSARY TO TELEVISION TERMS

Audio/Video Inputs * Located on the rear of the TV these

PTV * Projection Television (Rear and/or Front projection design

connectors (RCA phono type plug) are used for the input of audio

and video signals. Designed for use with VCRs (or other

accessories) in order to receive higher picture resolution and offer

sound connection options.

systems are available.)

Remote Sensor Window * A window or opening found on the TV

control panel through which infrared remote control command

signals are received.

Coaxial Cable * A single solid antenna wire normally matched

with a metal plug (F-type) end connector that screws (or pushes)

directly onto a 75 Ohm input found on the Television or VCR.

RF * Radio Frequency or modulated signal design used as the

carrier for television broadcasts.

Second Audio Program (SAP) * Another or additional audio

channel provided for in the Multichannel Television Sound (MTS)

broadcast standard. A monaural soundtrack included within the

recorded or video signal (usually containing a second language

translation for the displayed programming.)

Display * An on screen message or graphics that help the user

operate and adjust TV feature controls. See On Screen Displays

(OSD).

Identify* Method by which a remote control searches and finds an

operating code for another product (such as a VCR or Cable

Converter). Once the code has been "identified" then the TV

remote can operate and send commands to the other product.

Status * Allows the user to quickly confirm what channel number

is currently being viewed. Status can also be used to clear the TV

of on-screen displays or information (rather than waiting for the

displays to “time out” or automatically disappear from the screen).

LED * Light Emitting Diode or indicator.

Menu * An on-screen listing of feature controls shown on the TV

Subwoofer * A speaker designed for audio playback of only the

screen that are made available for user adjustments.

lowest-frequency notes (under 100 Hz.)

Multichannel Television Sound (MTS) * The broadcast standard

that allows for stereo sound to be transmitted with the TV picture.

S-Video Input * Allows direct connection of high-resolution video

sources, such as a Super VHS videocassette recorder, Laser Disc

player, etc. Provides improved picture resolution, sharpness, and

clarity.

On Screen Displays (OSD) * Refers to the wording or messages

generated by the TV to help the user with specific feature controls

(color adjustment, programming, etc.).

Twin Lead Wire * The more commonly used name for the two

strand 300 Ohm antenna wire used with many indoor and outdoor

antenna systems. In many cases this type of antenna wire requires

an additional adapter (or balun) in order to connect to the 75 Ohm

Input terminals designed into the more recent Televisions and

VCRs.

Picture -In-Picture (PIP) * Term used when two pictures are

shown on the TV screen at the same time. The smaller PIP picture

is supplied by a VCR (or other tuner/video playback source). The

PIP picture can also be moved and swapped with the TV's main

screen picture.

Variable Audio Output * An adjustable audio output which

allows for volume variations at the source.

Pre-Amplifier * The control center of a hi-fi system. Not only

amplifies source inputs, but also allows for source selection,

volume, tone, balance and all other controls that affect the sound.

Programming * The procedure of adding or deleting channel

numbers into the TV’s memory circuits. In this way the TV

“remembers’’ only the locally available or desired channel

numbers and skips over any unwanted channel numbers.

Download from Www.Somanuals.com. All Manuals Search And Download.

INDEX

Accessories/Optional.............................. 31-37, 48, 53, *Q/U-1

Minus(-)/Plus (+) Buttons...........................................*Q/U-3, 4

Movie Ratings.........................................................................21

Parental Control.................................................................19-24

Parental Guidelines.................................................................23

Picture-In-Picture (PIP).......................................48-53, *Q/U-2

PIP Audio Output jacks ....................................................31, 49

Picture Source Control......................................................10, 51

Precautions/Safety............................................2, 3, 55, *Q/U-1

Programming Channels ............................................13, *Q/U-2

Remote Control.....................................38-47, 50, *Q/U-2, 3, 4

Remote with VCRs............................................................42-47

Requesting Service............................................... 55, 58-59, 60

RF Coaxial Cable ...............................................48, 53, *Q/U-1

Reminder/Time and Channel..................................................18

Safety/Precautions............................................2, 3, 55, *Q/U-1

Second Audio Program (SAP)................................................28

Sensor Remote................................................................*Q/U-3

Sleep Timer.............................................................................17

Surround Sound ......................................................................32

Speaker Terminals ..................................................................32

Time/Channel Display..............................................18, *Q/U-3

Timer (Turn On) .....................................................................16

Variable Audio Output ...........................................................32

VCR Button........................................................33, 47, *Q/U-3

VCR/TV Connections.............................33-37, 48, 53, *Q/U-1

Tips for Service ...........................................................55, 58-59

TV Speaker Control................................................................31

Volume Display......................................................................30

Warranty .................................................................................58

Add/Delete Channels ..........................................13-14, *Q/U-2

Audio Controls ..................................................................27-32

Audio/Video Input ..................................33-37, 48, 53, *Q/U-2

Automatic Programming ..........................................13, *Q/U-2

Auto Picture.......................................................................38-39

Auto Sound.............................................................................40

Auto Surf ................................................................................41

Battery Installation .........................................................*Q/U-3

Blocking Channels ............................................................19-20

Cable TV Connections/Settings ................12, 48, 53 *Q/U-1, 2

Channel/Time Display..................................15, 16, 18, *Q/U-3

Channel Label.........................................................................25

Channel Memory.................................................13-14, *Q/U-2

Channel/Time Reminder.........................................................18

Clock Setting ..........................................................................15

Clock Timer............................................................................16

Closed Captioning ..................................................................11

Color Controls .............................................................6,*Q/U-4

Content Advisory ..............................................................19-24

Convergence .............................................................................8

Controls/TV............................................................*Q/U-2, 3, 4

Controls/Remote ...................................38-47, 50, *Q/U-2, 3, 4

Exit .................................................................................*Q/U-4

Features.....................................................................................5

First Time Set Up ...........................................................*Q/U-2

Help Menu............................................................54, *Q/U-2, 4

Inputs/Audio and Video ........................................33-36, 48, 53

Language.................................................................................26

Menu...........................................................................*Q/U-2, 4

* Q/U indicates page number reference in the separate Quick Use Guide

Download from Www.Somanuals.com. All Manuals Search And Download.

RENEWED

90 DAY

LIMITED WARRANTY

Download from Www.Somanuals.com. All Manuals Search And Download.

Krups Blender ZX7000 User Manual
LG Electronics Refrigerator LFX21980 User Manual
Lightolier Indoor Furnishings 1001FRD User Manual
Linear Home Security System TMD 90 User Manual
Linksys Network Card WAPPOE User Manual
Linksys Network Card WPC54G User Manual
Lochinvar Boiler EBS SUB 02 User Manual
Logitech Mouse m187 User Manual
Makita Cordless Drill 5007S User Manual
Maxxsonics Stereo Amplifier SS10001D User Manual