Owner's Manual
MDR533H
MDR535H
MDR537H
HDD & DVD RecoRDeR
witH Digital tuneR
Thank you for choosing Magnavox.
need help fasT?
ReaD youR Quick guiDe anD/oR owneR's Manual fiRst foR Quick tips tHat Make using
youR MagnaVox pRoDuct MoRe enjoyable.
if you HaVe ReaD youR instRuctions anD still neeD assistance,
you May access ouR online Help at www.Magnavox.coM/supporT
oR call 1-800-605-8610 wHile witH youR pRoDuct.
The model and serial numbers of this unit may be found on the cabinet.
You should record and retain those numbers for future reference.
Model No.:
Serial No.:
Please refer to the back cover of the manual for more Limited Warranty information.
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
© 2013 Funai Electric Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INFORMATION
To Avoid the Hazards of Electrical Shock and Fire
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it from an AC outlet. Grasp it by the plug.
• Do not put your fingers or objects into the unit.
Location and Handling
• Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.
• Avoid a place with drastic temperature changes.
• This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is
provided. Make sure to leave a space of 3.9 inches (10cm) or more around this apparatus.
Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.
• Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.
Dew Condensation Warning
• Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few
hours until its inside gets dry.
- The unit is moved from a cold place to a warm place.
- Under conditions of high humidity.
- After heating a cold room.
Note about Recycling
• This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local
regulations concerning chemical wastes.
• For product recycling information, please visit - www.magnavox.com
Notice for Progressive Scan Output
• Consumers should note that not all high definition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In case of picture problems with 480 progressive scan output, it
is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions
regarding your TV set compatibility with this 480p DVD recorder, please contact our customer service center.
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INFORMATION
Cleaning the cabinet
• Wipe the front panel and other exterior surfaces of the
• Never use a solvent, thinner, benzene or alcohol to clean
the unit. Do not spray insecticide liquid near the unit.
Such chemicals may discolor the surface or damage the
unit.
Supplied Accessories
Remote Control (NC003UD / NC003UH)
with AA (1.5 V) battery x2
Cleaning discs
• When a disc becomes dirty, clean it with a cleaning
cloth. Wipe the disc from the center to out. Do not
wipe in a circular motion.
RF coaxial cable
• Do not use solvents such as benzine, thinner,
commercially available cleaners, detergent, abrasive
cleaning agents or antistatic spray intended for analog
records.
Cleaning the disc lens
• If this unit still does not perform properly
although you refer to the relevant sections and to
“TROUBLESHOOTING” in this owner's manual, the laser
optical pickup unit may be dirty. Consult your dealer
or an Authorized Service Center for inspection and
cleaning of the laser optical pickup unit.
RCA audio/video cables
Disc handling
• Handle the discs so that fingerprints and dust do not
• Always store the disc in its protective case when it is
HDD handling
• HDD is a precision apparatus that is susceptible
to vibration, strong impact or dirt. Depending on
the installation environment or handling, the unit
may become partially damaged or in the worst
case, recording or replaying may not be available.
Especially while the HDD is in motion, do not subject
it to vibration or strong impact or pull out the power
plug. And if a power failure occurs, the content of the
recording/replaying program may be lost.
Owner’s Manual
Quick Start Guide
• HDD rotates at high speed when in operation. Be sure
that rotation has stopped and then move the unit
without subjecting it to strong impact or vibration.
IR signal check
If the remote control does not work properly, you can test
if the remote control sends out the infrared signal with
a digital camera. (With a digital camera or cellular phone
including built-in camera.)
Maintenance
Servicing
1 Turn on the digital camera.
2 Direct a digital camera to remote control,
then press and hold a button on the remote
control.
• Please refer to relevant topics on “TROUBLESHOOTING”
on pages 116-120 before returning the product.
• If this unit becomes inoperative, do not try to correct
the problem by yourself. There are no user-serviceable
parts inside. Turn the unit to the standby mode, unplug
the power plug and please call our help line mentioned
on the front page to locate an Authorized Service
Center.
If infrared light appears through digital
camera, the remote control is working.
Note
• Cannot guarantee about 3rd party’s remote controls.
Please contact the remote manufacturer if you have
any problem with it.
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INFORMATION
Trademark Information
Kodak and KODAK Picture CD Compatible
are trademarks of Kodak used under license.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
Dolby® Digital Stereo Creator
“Dolby® Digital Stereo Creator enables consumers to
create stereo DVD-Videos with stunning Dolby Digital
sound tracks at home. The technology, when utilized
instead of PCM recording, also saves recordable disc
space, allowing for higher video resolution or extended
recording time on each DVD. DVDs mastered using
Dolby Digital Stereo Creator will play back on all DVD-
Video players.”
Note: This is true when the players are compatible with
actual recordable DVD discs.
MAGNAVOX is a registered trademark of Philips Electronics North America Corporation and is used by Funai Electric
Co., Ltd. and Funai Corporation, Inc. under license from Philips Electronics North America.
© 2013 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed,
downloaded or stored in any storage medium, in any form or for any purpose without the express prior written
consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is
strictly prohibited.
Information in this document is subject to change without notice. Funai reserves the right to change the content
herein without the obligation to notify any person or organization of such changes.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
SAFETY INFORMATION . . . . . . . . . . . .2
INFORMATION ON RECORDING . . 41
BEFORE RECORDING . . . . . . . . . . . . 43
Safety Instructions
2
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Make Recording Compatible . . . . . . . . . . . . . . . . . . 43
Setting for Auto Chapter. . . . . . . . . . . . . . . . . . . . . . . 43
Recording the DTV Closed Caption . . . . . . . . . . . . 43
Recording from a Cable Box or Satellite . . . . . . . . 43
Trademark Information
5
FEATURES . . . . . . . . . . . . . . . . . . . . . . . .8
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
BASIC RECORDING & ONE-TOUCH
TIMER RECORDING. . . . . . . . . . . . . 44
AUTOSTART RECORDING . . . . . . . . 46
Symbols Used in this Owner’s Manual
9
FUNCTIONAL OVERVIEW . . . . . . . . 10
Front Panel
Rear Panel
10
11
12
Remote Control
Front Panel Display. . . . . . . . . . . . . . . . . . . . . . . . . . . .
TIMER RECORDING. . . . . . . . . . . . . . 47
Hints for Timer Recording . . . . . . . . . . . . . . . . . . . . . 51
SPECIAL RECORDING . . . . . . . . . . . . 52
Overwriting from the Beginning of the Title
Overwriting in the Middle of the Title
52
52
CONNECTION . . . . . . . . . . . . . . . . . . . 15
Antenna Connection (Required) . . . . . . . . . . . . . . . 15
Overview
15
Connecting to a TV Using Audio/Video jacks 16
Connecting to a TV Using the S-Video Out jack 16
Connecting to a TV
DUBBING. . . . . . . . . . . . . . . . . . . . . . . 54
Information on Dubbing
54
55
57
Setting for an External Device
Recording from an External Device
Using Component Video Out jacks
Connecting to a TV
with an HDMI Compatible Port
Connecting to a Cable/Satellite Box
Connecting to a TV
17
17
19
DVC to HDD/DVD Dubbing
Selected Title Dubbing
59
61
PROTECTING A DISC . . . . . . . . . . . . 64
PLAYING THE DISCS
without Audio/Video jacks
20
Digital Audio Connection. . . . . . . . . . . . . . . . . . . . . . 21
ON OTHER DVD PLAYERS. . . . . . . 65
BEFORE YOU START . . . . . . . . . . . . . 22
Finding the Viewing Channel on your TV
22
Auto Finalizing
66
Guide to On-Screen Display/Menu
Main Menu
Switching HDD/DVD Mode
How to Insert a Disc
25
27
27
INITIAL SETTING . . . . . . . . . . . . . . . . 28
CHANNEL SETTING. . . . . . . . . . . . . . 29
Auto Channel Scan
Adding/Deleting Channels
29
30
SETTING THE CLOCK . . . . . . . . . . . . 32
Auto Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Manual Clock Setting
Daylight Saving Time
34
34
TUNER SETTINGS . . . . . . . . . . . . . . . 35
Switching Analog Mode/Digital Mode
Channel Selection
35
Selecting TV Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
DTV Closed Caption . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Closed Caption Style . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Continued on the next page.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
INFORMATION ON PLAYBACK . . . 67
BASIC PLAYBACK . . . . . . . . . . . . . . . 69
INFORMATION ON EDITING. . . . . . 83
Guide to a Title List
How to Access the Edit Menu . . . . . . . . . . . . . . . . . 84
83
Direct Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Playback from the Title List . . . . . . . . . . . . . . . . . . . . 70
Playing Audio Discs and Picture Discs . . . . . . . . . . 72
Using the Title/Disc Menu. . . . . . . . . . . . . . . . . . . . . 73
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
EDITING . . . . . . . . . . . . . . . . . . . . . . . . 85
Deleting a Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Deleting Selected Titles. . . . . . . . . . . . . . . . . . . . . . . . 87
Putting Names on Titles
88
SPECIAL PLAYBACK . . . . . . . . . . . . . 74
Chapter Marks (Add). . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Chapter Marks (Delete) . . . . . . . . . . . . . . . . . . . . . . . . 90
Chapter Marks (Delete All) . . . . . . . . . . . . . . . . . . . . .
Dividing a Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Deleting a Scene of a Title . . . . . . . . . . . . . . . . . . . . . 93
Protecting a Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Hiding Chapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Setting an Index Picture . . . . . . . . . . . . . . . . . . . . . . . 97
Putting Name on Disc
Erasing Disc
Making Edits Compatible
Deleting All Titles in HDD
74
Fast Forward/Fast Reverse Playback
Variable Skip/Variable Replay
Rapid Playback
74
74
74
75
Step by Step Playback
Slow Forward/Slow Reverse Playback . . . . . . . . . 75
Chasing Playback during Recording. . . . . . . . . . . . 75
98
99
100
101
Zoom
Marker Setting
76
76
77
Random Playback
Slide Show
Program Playback
Playing Back the Autostart Recording
77
77
78
78
LIST OF SETTINGS. . . . . . . . . . . . . . 102
SETUPS. . . . . . . . . . . . . . . . . . . . . . . . 105
SEARCH . . . . . . . . . . . . . . . . . . . . . . . . 79
Title/Chapter Search
79
Playback
105
Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Video
HDMI
112
114
SELECTING THE FORMAT OF
AUDIO AND VIDEO. . . . . . . . . . . . . 81
TROUBLESHOOTING . . . . . . . . . . . 116
Switching Audio Soundtrack
Switching Camera Angles
Reducing Block Noise
81
82
82
Error Message
120
LANGUAGE CODE . . . . . . . . . . . . . . 121
GLOSSARY . . . . . . . . . . . . . . . . . . . . 122
SPECIFICATIONS . . . . . . . . . . . . . . . 123
ESPAÑOL. . . . . . . . . . . . . . . . . . . . . . 124
Discos Reproducibles. . . . . . . . . . . . . . . . . . . . . . . . . 124
Códigos de Región
Disco no Grabable 124
124
Conexión Básica. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Conexión a un Televisor con un
Puerto Compatible con HDMI
Configuración Inicial
Reproducción Directa
Grabación Básica
125
126
127
128
Copiado Básica
LIMITED WARRANTY . . . . Back cover
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Features
This unit not only plays back the contents on internal HDD, DVD, or CD, but also offers features for you to record on
HDD or DVD and edit them after that. The following features are offered with this unit.
Recording
Automatic title finalizing (DVD+R/DVD-RW/-R only):
You can finalize discs automatically after finishing all
timer recordings or at the end of the disc space if you set
this in the main menu.
This unit allows you to record on the HDD, a DVD+RW/-
RW (rewritable) and a DVD+R/-R (one-time write). You can
choose any one for your convenience. Even if you choose
DVD-RW/-R, these discs will automatically be recorded in
the DVD+VR mode.
Alternate recording:
In the following cases, the unit will detect it and
automatically record to the HDD even when DVD is
selected as the recording media.
Up to 36 program recording:
You can program the unit to record up to 36 programs
within a one-month period. Daily or weekly program
recordings are also available.
- If there is no recordable disc in the unit
- If the disc does not have enough space to complete the
recording
- If the material is “copy-once” program and prohibited to
be recorded on a DVD
- If the disc is not available because the repairing process
is cancelled halfway
This feature is available only for timer recording. Not
available for one-touch timer recording.
All high definition (HD) pictures will be converted
down to Standard Definition, when recording on the
HDD or DVD.
One-touch timer recording (OTR):
You can easily set a recording time as you prefer. Every
time [REC] is pressed during recording, the recording
time will be increased by 30 minutes up to 6 hours. The
recording automatically stops when the recording time
you set is reached or the disc is full.
Automatic chapter mark setting:
Chapter marks will be put on recordings as you set before
attempting to record.
Automatic title list making:
The unit makes a title list with the index automatically.
Left channel stereo recording:
This unit can record the sound of the left channel
monaural input as left and right channels automatically
(the input from the L2 jacks only).
320 GB hard disk(MDR533H):
This unit is equipped with a 320GB hard disk which allows
you to record up to 371 hours (with SLP mode). You
can record for 12 hours maximum at a time with timer
recording. (6 hours when one-touch recording)
500 GB hard disk(MDR535H):
Dubbing
This unit is equipped with a 500GB hard disk which allows
you to record up to 604 hours (with SLP mode). You
can record for 12 hours maximum at a time with timer
recording. (6 hours when one-touch recording)
With this unit, you can enjoy bi-directional dubbing
High speed dubbing (HDD ➔ DVD only):
If you dub a title recorded in SLP mode to DVD+R/-R,
dubbing speed will be 24 times at the maximum.
1 TB hard disk(MDR537H):
This unit is equipped with a 1TB hard disk which allows
you to record up to 1252 hours (with SLP mode). You
can record for 12 hours maximum at a time with timer
recording. (6 hours when one-touch recording)
Auto recording mode dubbing:
When dubbing, if you set the recording mode to “Auto”,
the recording mode will automatically be adjusted so the
titles will fit nicely in the remaining space of the disc.
Autostart recording:
Every time you turn on this unit, this unit automatically
records the channel currently viewed and temporarily
stores the recorded content to the HDD. By using this
function, you can pause or go back to the TV program you
are currently watching, and you can also start recording the
whole TV program even at the middle of the TV program.
DV dubbing:
This function helps you to easily dub the contents of the
DVC (digital video camcorder) to HDD/DVD.
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Playback
Compatibility
Theater surround sound in your home:
When connecting the unit to an amplifier or a decoder
which is compatible with Dolby Digital, you can
experience the theater surround sound from discs with
surround sound system.
Quick search for what you want to watch:
You can easily find the part you want to watch using the
search functions. You can search for a desired point by
title, chapter or time.
Recorded DVDs are able to play in other DVD Players:
Recorded discs can be played back on regular DVD
players, including computer DVD drives compatible
with DVD-video playback. Although DVD+R are playable
on other units without finalization in most cases, it
is recommended to finalize in order to stabilize the
performance. For DVD-RW/-R, you need to finalize the
recorded discs to play back on other DVD players.
Variable skip:
Others
You can skip forward a certain time, which is specified
in “Playback” menu in advance, with one-touch while
playback.
Progressive scan system:
Unlike conventional interlace scanning, the progressive
scan system provides less flickering and images in higher
resolution than that of traditional television signals.
Variable replay:
You can skip back a certain time, which is specified in
“Playback” menu in advance, with one-touch while
HDMI (High-Definition Multimedia Interface)
playback.
You can enjoy clearer audio/video output when
connecting this unit to a display device with an HDMI-
compatible port.
Chasing playback during recording and simultaneous
playback and recording:
You can play back the already recorded part of the current
recording or another title during recording.
Symbols Used in this Owner’s Manual
To specify for which media type each function is, we put
the following symbols at the beginning of each item to
operate.
* DVD-RW/-R recorded in VR mode or non compatible
recording format are not playable.
* DVD-RW recorded in the mode other than +VR is not
recordable on this unit unless you erase all contents in
the disc (refer to page 99).
* DVD-R recorded in the mode other than +VR is not
recordable on this unit.
Playing back JPEG/KODAK Picture CD files:
You can enjoy JPEG files which are recorded on
DVD+RW/+R, DVD-RW/-R and CD-RW/-R, and KODAK
Picture CD files which are recorded on CD-RW/-R.
Editing
Available for a disc that is not finalized or DVD+RW.
Deleting a title:
Symbol Description
You may delete a recorded title.
Putting names on titles:
For Recording, Playing Back, and Editing
You can put your favorite names on titles.
Description refers to HDD
Setting / clearing chapter marks:
You can set/clear chapter marks on titles.
Dividing titles:
Description refers to DVD+RW
You can divide a title into 2 or more.
Description refers to DVD+R
Description refers to DVD-RW
Deleting a scene of a title:
You can delete a scene from a title as you like.
Description refers to DVD-R
Hiding chapters:
To keep others from playing back some chapters without
permission, you can hide chapters.
For Playback only
Description refers to DVD-video
Setting an index pictures:
Description refers to audio CD
You may set a specific scene of a recorded title for your
opening Title Menu picture.
Description refers to video CD with PBC function
Putting name on disc:
This feature allows you to set a specific Name for any
recorded disc, that you may record.
Description refers to video CD without PBC
function
Description refers to discs with JPEG files
(KODAK Picture CD files included)
If you do not find any of the symbols listed above under the
function heading, the operation is applicable to all media.
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Front Panel
1
2
3*
4
5
6
7 8* 9 10
15
14 13 12 11
( ) The unit can also be turned on by pressing these buttons.
1. ySTANDBY/ON button
10.CHANNEL
/
buttons
Press to turn on the unit, or to turn the unit to the
standby mode. (To completely shut down the unit,
you must unplug the AC power cord)
2. Disc tray
Press to change the Channel up and down.
11.DV-IN jack (L3)
Use to connect the DV output of External device with
a DV cable.
Place a Disc after opening the disc tray.
3. AOPEN/CLOSE button*
12.AUDIO input jacks (L2)
Use to connect External device with an RCA audio
cable.
Press to Open or Close the disc tray.
4. Display
13.VIDEO input jack (L2)
Refer to “Front Panel Display” on page 14.
5. HDD button
Use to connect External device with an RCA video
cable.
Press to select the HDD mode.
6. DVD button
Press to select the DVD mode.
7. CSTOP button
Press to stop Playback or Recording.
8. B
Press to Start or Resume playback.
9. IRECORD button
14.S-VIDEO input jack (L2)
Use to connect the S-Video output of External device
with an S-Video cable.
15.Infrared sensor window
Receive signals from your Remote control so that you
can control the unit from a distance.
Press once to start a Recording. Press repeatedly to
start One-Touch Timer Recording.
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Rear Panel
4
1 2
3
5
VIDEO VIDEO
IN
OUT
Y
L
L
R
R
IN
OUT
COAXIAL
AUDIO IN
ANTENNA
S-VIDEO AUDIO OUT
S-VIDEO
(
)
L1
12 11 10 9
8
7
6
AC plug
1. ANTENNA IN jack
8. COMPONENT VIDEO OUTPUT jacks
Use to connect an Antenna / Cable Box / Satellite
Receiver for RF Pass Through only.
2. VIDEO IN jack (L1)
Use to connect a TV monitor with component video
inputs with a component video cable.
9. AUDIO OUT jacks
Use to connect External device with an RCA video
cable.
3. VIDEO OUT jack
Use to connect a TV monitor, AV receiver or other
device with an RCA video cable.
4. HDMI OUT jack
Use an HDMI cable to connect to a display with an
HDMI compatible port.
5. AC Power Cord
• Connect to a standard AC outlet to supply power to
this unit.
Use to connect a TV monitor, AV Receiver or other
devices with a set of RCA audio cables.
10.S-VIDEO IN jack (L1)
Use to connect an External device, by an S-Video
cable.
11.AUDIO IN jacks (L1)
Use to connect an External device with a set of RCA
audio cables.
12.ANTENNA OUT jack
Use to connect an RF coaxial cable to pass the signal
from the ANTENNA IN to your TV.
• Unplug this cord from the AC outlet to completely
shut down the unit.
6. DIGITAL AUDIO OUTPUT (COAXIAL) jack
Use to connect an AV receiver, Dolby Digital decoder
or other device with a digital audio coaxial input jack
with a digital audio coaxial cable.
7. S-VIDEO OUT jack
Use to connect the S-Video input of a TV monitor, AV
receiver or other device with an S-Video cable.
Note
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
• This unit does not have the RF modulator.
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Remote Control
Installing the Batteries in the Remote Control
Using a Remote Control
Install the 2 AA (1.5 V) batteries by matching the symbols
as displayed in the Remote Control.
Keep in mind the following when using the remote
control:
Make sure that there are no obstacles between the remote
control and the infrared sensor window on the unit.
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the infrared
sensor window of the unit.
• Remote controls for different devices can interfere
with each other. Avoid using remote controls for other
devices located close to the unit.
•
Open the cover.
2
1
• Replace the batteries when you notice a fall off in the
operating range of the remote control.
• The maximum operable ranges from the unit are as
follows.
- Line of sight: approx. 23 feet (7m)
- Either side of the center:
approx. 16 feet (5m) within 30°
- Above: approx. 16 feet (5m) within 15°
- Below: approx. 10 feet (3m) within 30°
30˚
30˚
the marks indicated in the battery compartment.
16feet (5m)
23feet (7m)
16feet (5m)
18
1
2
3
Close the cover.
19*
21
20
1
4
2
5
6
8
22
23
25
7
24
Note
Incorrect use of batteries can result in hazards such as
leakage and bursting. Please observe the following:
26
9
• Lithium or ni-cad and ni-mh rechargeable batteries
are not recommended to use for remote control.
• Do not mix different types of batteries such as
alkaline and standard (carbon-zinc).
10
27
28
29
11
• Do not mix new and old batteries together.
• Do not use different kinds of batteries together.
Although they may look similar, different batteries
may have different voltages.
• Make sure that the + and - ends of each battery
match the indications in the battery compartment.
12
14
16
30
31
32
13*
15
• Remove batteries from battery compartment that is
not going to be used for a month or more.
• When disposing of used batteries, please comply
with governmental regulations or environmental
public instruction’s rules that apply in your country
or area.
17
33
34
• Do not recharge, short-circuit, heat, burn or
disassemble batteries.
Instructions continue on the next page.
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
( ) The unit can also be turned on by pressing these buttons.
1. DTV/TV button
• Press to switch between Digital TV (DTV) mode and
Analog TV (TV) mode.
19.OPEN/CLOSE A button*
• Press to Open or Close the Disc tray.
20.REPEAT button
2. STANDBY/ON y
• Press to display the Repeat menu.
21.HDMI button
• Press to set the HDMI Display mode-Only when
using the HDMI connection.
22.CLEAR button
• Press to turn On the unit, or to turn the unit to the
Standby mode. (To completely shut down the unit,
you must unplug the AC power cord)
• Press to switch the Audio language for digital TV.
• Press to display the Audio menu during playback.
4. Number/Character buttons
• Press to clear the information once entered, to clear
the marker settings, or to cancel the programming
for CD, etc.
• Press to select Channel numbers.
• Press to select a title/chapter/track/file on display.
• Press to enter values for the settings in the Main
menu.
23.TIMER PROG. button
• Press to display the Timer Programming list.
24.DVD button
• Press to select the DVD mode.
25.TITLE button
5. Decimal ( • ) button
Digital mode:
• Press to display the Title list.
2 6.OK button
• Press to confirm the major/minor channel selection
made by [the Number buttons]
6. DISPLAY button
• Press to turn the Display Menu on or off.
7. HDD button
• Press to select the HDD mode.
8. DISC MENU button
• Press to display the Disc Menu.
9. Cursor K/ L/ {/ B buttons
• Press to select items or settings.
10.MENU button
• Press to Confirm or Select Menu items.
27.RETURN button
• Press to return to the previously displayed menu
screen.
28.SKIP
button
• Skips by the amount of Time Set in Advance.
29.REPLAY button
• Replays by the amount of Time Set in Advance.
30.FFW D button
During playback, press to Fast Forward the playback.
• When playback is in pause, press to Slow Forward
the playback.
• Press to display the Main Menu.
• During playback, press and hold for more than 3
seconds to switch the Progressive Scanning mode
to the Interlace mode.
31.NEXT G button
• During playback, press to Skip to the next chapter,
track or file.
• When playback is in pause, press repeatedly to
Forward the playback step by step.
32.RAPID PLAY button
11.CHANNEL
/
buttons
• Press to change the Channel Up and Down.
12.REW E button
• During playback, press to Fast Reverse the playback.
• When playback is in pause, press to Slow Reverse
the playback.
• During playback, press to Play Back in a slightly
Slower-0.8x/Faster-1.3x/Normal mode while
Keeping the Sound output.
13.PLAY B button*
• Press to start Playback or Resume playback.
14.PREV H button
33.DUBBING button
• During playback, press to start Dubbing right away.
• In stop mode, press to display “Dubbing” menu.
34.REC MODE button
• During playback, press to return to the Beginning of
the current chapter, track or file.
• When playback is in Pause, press repeatedly to
Reverse the playback step by step.
15.STOP C button
• Press to stop Playback or Recording.
• Press to exit from the Title list.
16.PAUSE F button
• Press repeatedly to switch the Recording mode.
Note
• If using a universal remote, please check for any
additional remote code or contact the manufacturer
for additional assistances.
• Press to pause Playback or Recording.
17.REC button
• Cannot guarantee about 3rd party’s remote controls.
Please contact the remote manufacturer if you have
any problem with it.
• Press once to start a Recording.
• Press repeatedly to start the One-Touch Timer
Recording.
18.SOURCE button
• Press to select the appropriate Input.
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Front Panel Display
2
3
DTV BS CS
DR
CD
VCR
1
PM
4
DB HDD
DVD
5
1.
4. Current status of the unit
5. Displays the following
: Appears in the afternoon
with the clock display.
(Nothing appears in the
morning.)
• Elapsed playback time
• Current title/chapter/track /file
number
• Recording time/remaining time
• Clock
• Channel number
• Remaining time for one-touch
timer recording
• Selected HDMI output
: Appears when playback is
paused.
PM
: Appears when playing back
an HDD or disc.
2.
: Appears when the timer
programming or OTR has
been set and is proceeding.
: Appears when the channel
is in DTV mode.
3. Title/track/file and chapter mark
Entire Display:
Flashes when timer
programming was not executed
: Appears when indicating a
title/track/file number.
: Appears when indicating a
chapter number.
: Appears during recording
process.
Entire Display:
Flashes when a recording
pauses.
: Appears when a disc is in
this unit.
: Appears during dubbing.
DB
: Appears when the unit is in
HDD mode.
HDD
: Appears when the unit is in
DVD mode.
DVD
Display Message
Appears when the disc tray is
opening.
Appears when HDMI output
(480p) is selected.
Appears when HDMI output
(720p) is selected.
Appears when the disc tray is
closing.
Appears when a disc is loaded
on the disc tray.
Appears when HDMI output
(1080i) is selected.
Appears when data is being
recorded on a disc.
Appears when HDMI output
(1080p) is selected.
Appears when the PBC function
is activated. (Video CD playback
only. Refer to page 68.)
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION
Read this first:
1) Disconnect the AC power cords of the devices from the AC outlet.
2)
3) A fter making all the connections, connect the AC power cords of the devices.
•
Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR, pictures may be
distorted due to the copy protection system.
When “Progressive Scan” is set to “ON”, no video signal will be output from the VIDEO OUT or S-VIDEO OUT jack.
Antenna Connection (Required)
rear of this unit
RF coaxial
cable
VIDEO VIDEO
Y
IN
OUT
L
L
R
R
IN
OUT
COAXIAL
AUDIO IN
(L1)
ANTENNA
S-VIDEO AUDIO OUT
S-VIDEO
ANT. IN
This connection is for
TV pass through only
VHF / UHF
antenna
or
ANTENNA
RF coaxial
cable
cable TV
company
Choose one of the following connections
depending on the jacks on your TV.
Note
• For your safety and to avoid damage to the device, please unplug the RF coaxial cable from the ANTENNA IN jack before
moving the unit.
• If you use an antenna to receive analog TV, it should also work for DTV reception. Outdoor or attic antennas will be
more effective than set-top versions.
• ANTENNA OUT jack is for tuner pass through only. HDD/DVD playback through the RF is not possible.
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
Please purchase the rest of the necessary cables at your local store.
Overview
Refer to
If Your TV has
Higher
Quality
HDMI IN
page
17
If you are using
cable / satellite box
page
19
page
17
COMPONENT VIDEO IN
S-VIDEO IN
If your device has
only an ANT. IN jack
page
16
page
20
page
16
ANT. IN
Standard
Quality
R
L
AUDIO IN VIDEO IN
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION
Connecting to a TV Using Audio / Video jacks
VIDEO IN
RCA video cable
VIDEO
OUT
AUDIO IN
L
L
RCA audio cable
R
R
AUDIO OUT
rear of this unit
VIDEO VIDEO
IN OUT
Y
L
L
R
R
IN
OUT
COAXIAL
AUDIO IN
ANTENNA
S-VIDEO AUDIO OUT
S-VIDEO
(
)
L1
ANT. IN
This connection is for
TV pass through only
RF coaxial
cable
VHF / UHF
antenna
or
RF coaxial
cable
ANTENNA
cable TV
company
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Connecting to a TV Using the S-Video Out jack
AUDIO IN
VIDEO
OUT
L
RCA audio cable
L
R
S-VIDEO IN
S-Video cable
R
OUT
AUDIO OUT
S-VIDEO
ANT. IN
This connection is for
TV pass through only
VHF / UHF
antenna
RF coaxial
cable
rear of this unit
VIDEO VIDEO
IN OUT
Y
RF coaxial
cable
L
L
R
R
IN
OUT
COAXIAL
AUDIO IN
ANTENNA
S-VIDEO AUDIO OUT
S-VIDEO
(
)
L1
or
cable TV
company
ANTENNA
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION
Connecting to a TV Using Component Video Out jacks
AUDIO IN
L
RCA audio cable
R
COMPONENT
VIDEO IN
(Green)
(Blue)
(Green)
(Blue)
(Red)
Y
VIDEO
OUT
Y
RCA component
video cable
L
PB
/CB
(Red)
PR
/CR
R
COMPONENT
AUDIO OUT
VIDEO OUTPUT
rear of this unit
ANT. IN
This connection is for
TV pass through only
RF coaxial
cable
VIDEO VIDEO
IN OUT
Y
L
L
VHF / UHF
antenna
R
R
IN
OUT
COAXIAL
AUDIO IN
ANTENNA
S-VIDEO AUDIO OUT
S-VIDEO
(
)
L1
RF coaxial
cable
or
cable TV
company
ANTENNA
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
Connecting to a TV with an HDMI Compatible Port
• HDMI outputs the video/audio signals without converting to analog signals.
• No audio connection is required.
• High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for better compatibility.
• Use an HDMI cable with the HDMI logo (a certified HDMI cable) for this connection.
HDMI IN
HDMI cable
HDMI OUT
rear of this unit
VIDEO VIDEO
Y
IN
OUT
L
L
R
R
IN
OUT
COAXIAL
AUDIO IN
ANTENNA
S-VIDEO AUDIO OUT
S-VIDEO
(
)
L1
ANT. IN
This connection is for
TV pass through only
VHF / UHF
antenna
Do not tilt the connector when inserting it into the HDMI jack, and make sure the
shapes of the jack and the connector are matched.
or
RF coaxial
cable
RF coaxial
cable
cable TV
company
ANTENNA
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
Please purchase the rest of the necessary cables at your local store.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION
HDMI Mode and Actual Output Signals
Press [HDMI] to select the HDMI output mode. The output mode changes as follows every time [HDMI] is pressed.
HDMI connection makes this unit automatically output the most suitable resolution for your TV.
Front Panel Display Video Output Signal
480 Progressive
Press [HDMI]
720 Progressive
Press [HDMI]
Press [HDMI]
1080 Progressive
Press [HDMI]
• The HDMI mode that is not supported by the display device will be skipped.
*HDMI: High Definition Multimedia Interface
Note
• Some devices with an HDMI input may not operate properly with this unit.
• When using an HDCP-incompatible display device, the image will not be viewed properly.
• Among the devices that support HDMI, some devices can control other devices via the HDMI connector; this unit can be controlled
by another device via the HDMI connector.
• The audio signals from the HDMI connector (including the sampling frequency, the number of channels and bit length) may be
limited by the device that is connected.
• Among the monitors that support HDMI, some do not support audio output (for example, projectors). In connections with device
such as this unit, audio signals are not output from the HDMI output connector.
• When this unit’s HDMI connector is connected to a DVI-D compatible monitor (HDCP compatible) with an HDMI-DVI converter cable,
the signals are output in digital RGB.
• When a power failure occurs, or when you unplug the unit, some problems with the HDMI setting might occur. Please check and set
the HDMI setting again.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION
Connecting to a Cable / Satellite Box
RCA video cable
RCA audio cable
VIDEO IN
RCA video cable
VIDEO VIDEO
IN
OUT
R
L
AUDIO OUT VIDEO OUT
AUDIO IN
L
L
RCA audio
cable
L
cable/satellite box
R
R
R
IN
AUDIO IN
S-VIDEO AUDIO OUT
(
)
L1
rear of this unit
ANT.OUT ANT. IN
ANT. IN
satellite
dish
VIDEO VIDEO
Y
IN
OUT
L
L
This connection is for
TV pass through only
R
R
RF coaxial cable
IN
S-VIDEO AUDIO OUT
OUT
S-VIDEO
COAXIAL
AUDIO IN
ANTENNA
(
)
L1
or
RF coaxial
cable
cable TV
company
RF coaxial
cable
ANTENNA
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
• Required cables and connecting methods differ depending on the cable/satellite box.
For more information, please contact your cable/satellite provider.
• Instead of using VIDEO OUT jack on this unit, you can also use S-VIDEO OUT jack, COMPONENT VIDEO OUTPUT
jack or HDMI OUT jack for connecting to your TV.
With this setup:
• You can record any unscrambled non-copy protected program by selecting the channel on the cable/satellite box.
Be sure that the cable/satellite box is turned on.
• You cannot record one channel while watching another channel.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION
Connecting to a TV without Audio / Video jacks
VHF / UHF
antenna
rear of this unit
VIDEO VIDEO
Y
IN
OUT
L
L
R
R
IN
OUT
COAXIAL
AUDIO IN
ANTENNA
S-VIDEO AUDIO OUT
S-VIDEO
(
)
L1
RF coaxial
cable
VIDEO
OUT
RCA video
cable
or
L
cable TV
company
ANTENNA
R
AUDIO OUT
RCA audio cable
ANT. IN
rear of your RF modulator
(not supplied)
RF coaxial cable
RF coaxial cable
Set channel 3 or 4
3
4
R
L
ANT. IN CHANNEL
AUDIO IN VIDEO IN TO TV
Set channel 3 or 4
No Antenna (RF) Output!
If your TV only has an Antenna input
ANT. IN
(no A/V inputs), you will need a
No A/V
Inputs
RF modulator (NOT INCLUDED) to
connect this player.
TV
RF modulator
3
4
L
R
TO TV ANT. IN
CHANNEL VIDEO IN
AUDIO IN
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
• RF modulator is not supplied with this unit. You need to purchase it at your local store.
• The quality of picture may become poor if this unit is connected to an RF modulator.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION
Digital Audio Connection
Dolby Digital decoder
rear of this unit
COAXIAL
VIDEO VIDEO
Y
IN
OUT
digital audio
coaxial cable
L
L
R
R
IN
OUT
COAXIAL
AUDIO IN
ANTENNA
S-VIDEO AUDIO OUT
S-VIDEO
(
)
L1
COAXIAL
digital audio
coaxial input jack
HDMI Audio Connection
AV receiver / amplifier with an HDMI input jack
rear of this unit
VIDEO VIDEO
IN OUT
Y
L
L
HDMI IN
R
R
HDMI cable
IN
S-VIDEO AUDIO OUT
OUT
COAXIAL
AUDIO IN
ANTENNA
S-VIDEO
(
)
L1
HDMI OUT
To set up “HDMI Audio” refer to pages 104 and 114.
To set up “Dolby Digital” refer to pages 102 and 107.
Dolby Digital
Audio format (disc)
HDMI
Digital Output
Setting of this unit
PCM
2 channel PCM
Dolby Digital
2 channel PCM
Dolby Digital
Dolby Digital
Stream
PCM
2 channel PCM
LPCM
Stream
Actual Output
Cables not included.
Please purchase the necessary cables at your local store.
• The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound
by an MD or DAT deck.
• By connecting this unit to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi channel
surround sound as in movie theaters.
• Playing back a DVD using incorrect digital audio settings may generate noise distortion and also damage speakers.
2 Channel Analog Audio Connection
stereo system
VIDEO
OUT
analog audio
rear of this unit
input jacks
L
VIDEO VIDEO
IN OUT
Y
AUDIO IN
L
L
R
L
R
R
IN
OUT
COAXIAL
AUDIO IN
ANTENNA
S-VIDEO AUDIO OUT
S-VIDEO
(
)
L1
R
AUDIO OUT
RCA audio cable
Supplied cables used in these connections are as follows:
• RCA audio cable (L/R) x 1
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 21
BEFORE YOU START
Finding the Viewing Channel on your TV
After you have completed all the connections, you must find the viewing channel (external input channel) on your TV.
After you have made all the
necessary connections, press
[STANDBY/ON y] to turn on the unit.
Turn on your TV.
• If connected to your VCR make sure it is
switched Off or in Standby mode before
proceeding.
Locate the Video/Input button on the
external Input Channel. Press until
you see the “Initial Setup” menu on
Initial Setup
Language
English
Français
Español
You may try to access the Video/Input mode by:
-Locate the input button on the Front/Top/Side
of the TV
-Locate the Input Mode in the TV’s Setup Menu.
If you cannot locate the Video/Input button on
the TV’s remote control, refer to the TV’s user
Manual or “Input Mode Names for Common TV
Brands (Example)”.
If more than 10 minutes has passed, you may
see the MAGNAVOX screen saver.
Proceed to step 2 in “INITIAL
SETTING” on page 28.
Input Mode Names for Common TV Brands (Example)
Admiral AUX
Panasonic TV/VIDEO
RCA INPUT, TV/VCR,
Curtis
LINE1, LINE2,
00, 90, 91, 92, 93
Mathis
00, 90, 91, 92, 93
GE
INPUT, TV/VCR, Samsung TV/VIDEO
00, 90, 91, 92, 93
Hitachi
JVC
INPUT, AUX
VIDEO, VIDEO 1, Sharp
VIDEO 2, VIDEO 3
Sanyo
VIDEO
00
• Video input selection varies for different brand’s
models of TVs.
Sony
VIDEO1, VIDEO2,
VIDEO3
• Consult your TV manufacturer if none of the above is
successful.
LXI-Series 00
Magnavox AUX CHANNEL
Toshiba
Zenith
TV/GAME
00
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU START
Guide to On-Screen Display / Menu
This unit uses the following on-screen displays and menus to guide you to the easy operations.
The on-screen displays give you the information on the loaded disc or the disc/file in playback, or the HDMI status, etc.
The menus allow you to change the various kinds of settings for playing back, recording, or editing to suit your preference.
The on-screen display changes in the following order
Autostart Recording Information
as you press [DISPLAY].
7
OFF
2:59:44 / 3:31:31
DTV Program Guide (only in DTV mode)
CH 10
Autostart Recording Information
(only in HDD mode when no titles are playing back)
5
6
HDD / DVD Information/Menu
7:10AM
10:42AM
41
4
10:10AM
42 43
Title Name Information
(only when DVD+RW/DVD+R/DVD-RW/DVD-R, or HDD
is in playback)
1. Starting time of the autostart recording
2. Status of the time autostart recording
Live: Indicates when watching live TV
: Indicates when playing back the autostart recording.
3. The time that the picture currently displayed on the
screen is broadcasted
or
File Name Information
(only when a disc with JPEG/KODAK Picture CD files
is in playback)
B
HDMI Information
(only for the images output through the HDMI output)
4. Current time
5. The progress of the autostart recording
6. Current point of the playback of the autostart recording
7. Elapsed time of the playback of the autostart
recording/total time of the autostart recording
DTV Program Guide
1
2
3
4
6
7
8
9
A Day of Memories
Multilingual Caption TV-PG
DTV 11.1
KABC
A
quarter-century ago, which may now qualify
as the good old days of newspapering,
run-of-paper sales accounted for 80 percent
of the industry's advertising revenues.
Signal
Bad
Good
5
1. Program Title(1 line displayed)
2. Audio Information (Indicates that the program being
broadcasted is available in multi-languages.)
3. Closed Caption (Indicates that the program being
broadcasted is available with closed captioning.)
4. Program Guide (Max. 4 lines displayed)
5. Signal strength (Indicates the signal strength of the
current channel.)
6. Program Rating
7. Aspect Ratio of the selected program
8. Channel number
9. Broadcast station
• When the program guide is displayed in more than 4
lines, use [K/ L] to scroll.
• No description is displayed when the program guide
data is not provided.
• In some cases, DTV closed caption function of the
unit may not work even when the closed caption
icon is shown. In such case, check the closed caption
setting of your TV (Only if the unit is connected to a
TV with the RCA Video Cable).
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU START
HDD / DVD Information / Menu
6
Title / File Name Information
7
Title Name
My Title
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
CH 10
5
1
2
File Name
My File
DVD SP(2Hr)
1h53m
4
3
HDMI Information
Displayed items may vary depending on the disc you
insert.
1. Indicates the file type or a disc type and format mode.
(DVD mode only)
2. Indicates a channel number or selected external input
channel.
*
*
1
2
Video Info.
Audio Info.
:
:
480p
/
YCbCr
Bitstream
3. Indicates the component in use, a recording mode and
possible recording time left.
*
3
The on-screen indication of the possible recording time
left on HDD/DVD may differ from the actual recordable
time as this unit employs the variable bit rate encoding
system which varies the recording (storage) amount of
data in conformity with the amount of information on
the video.
4
4. Indicates an operation status.
5. Icons Used:
1. Indicates the resolution of the HDMI output image.
2. Indicates the HDMI video format.
3. Indicates the HDMI audio format.
4. Indicates current disc status.
“- - -” will be displayed, when it does not have any
information.
: for title / chapter search, track search and time
search. (Refer to pages 79-80)
Audio: to switch audio soundtracks. (Refer to page 81.)
Subtitle: to switch subtitles. (Refer to page 81.)
Angle: to switch camera angles. (Refer to page 82.)
Repeat: to repeat playback. (Refer to page 77.)
Marker: to add markers to a title. (Refer to page 76.)
Noise Reduction: to reduce noise in the playback
picture. (Refer to page 82.)
: to zoom screen. (Refer to page 76.)
6. Indicates the current title number/total number of
titles, the current chapter number/total number of
chapters, and time lapse of the current title playback/
total duration of the title.
7. Indicates the currently active unit.
: HDD
: DVD
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU START
Main Menu
Press [MENU] to display the main menu. Then use
[K/L] to select a menu and press [OK] to display the
menu. These menus provides entries to all main settings.
1. General Setting:
To go to general setting menu.
2. Timer Programming:
To program a timer recording.
3. Title List:
To call up the title list.
4. Disc Edit:
To set up the DVD setting.
5. HDD Menu:
To set up the HDD setting.
6. Dubbing:
Menu
General Setting
1
Timer Programming
2
Title List
3
Disc Edit
5
46
47
HDD Menu
Dubbing
DISC Playback Mode
• To dub the content of the HDD to DVD or vice versa.
• “Dubbing” is available only when a recordable disc is
loaded.
7. DISC Playback Mode:
To set up the disc playback setting.
• “DISC Playback Mode” is available only when, an audio
CD, a video CD and a disc with JPEG/KODAK Picture
CD files is inserted into the unit.
General Setting Menu
1. Playback:
General Setting
1
To set up the unit to play back discs as you prefer.
2. Display:
2
Playback
Display
Video
Recording
Clock
Channel
HDMI
Parental Lock
Disc Audio
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
3
To set up the screen as you prefer.
4
5
26
To set up the video setting. (Refer to page 113 for TV
Aspect setting.)
Still Mode
Variable Skip / Replay
37
4. Recording:
To set up the unit to record to discs as you prefer.
To set up the clock of the unit as you need.
To adjust the channel setting on the unit as you prefer.
To set up the HDMI connection setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 25
BEFORE YOU START
Disc Edit / HDD Menu / Dubbing / DISC Playback Mode
1. Edit Disc Name:
<Disc Edit menu (DVD+RW)>
Allows you to rename the disc.
Disc Edit
2. Erase Disc: (DVD+RW/DVD-RW only)
Allows you to erase all contents in the disc and format it.
3. Make Edits Compatible: (DVD+RW only)
Allows you to memorize the editing status on the
disc if you have added or deleted chapters, or made
chapters hidden on this unit, and to show the effects
when playing back on the other unit.
Finalize: (DVD+R/DVD-RW/-R only)
Allows you to finalize a disc containing recorded titles.
4. Disc Protect :
Allows you to protect a disc from accidental editing or
recording.
5. Random Play:
Allows you to activate the random playback feature.
6. Program Play: (audio CD/video CD only)
Allows you to activate the program playback feature.
7. PBC (Video CD only):
1
Edit Disc Name
Erase Disc
Make Edits Compatible
Disc Protect OFF
2
3
4
ON
<Disc Edit menu (DVD-RW)>
Disc Edit
1
Edit Disc Name
Erase Disc
Finalize
Disc Protect OFF
2
3
ON
4
<Disc Edit menu (DVD+R/DVD-R)>
Disc Edit
1
Edit Disc Name
Finalize
Disc Protect OFF
23
ON
34
<DISC Playback Mode menu (audio CD/VCD)>
Allows you to select images or information on the
menu screen by activating PBC (playback control)
function.
DISC Playback Mode
15
Random Play
Program Play
PBC (Video CD only)
26
37
4
8. Slide Show: (JPEG/KODAK Picture CD files only)
Allows you to select the display time of the slide show
mode.
DISC Playback Mode
9. Delete All Unprotected Titles:
Allows you to delete all unprotected titles in the HDD
title list.
Photo
Random Play
Slide Show
25
28
10.Delete All Titles:
Allows you to delete all titles, including the protected
titles, in the HDD title list.
11.HDD DVD:
Allows you to dub from HDD to DVD.
12.DVD HDD:
HDD Menu
1
9
Delete All Unprotected Titles
Delete All Titles
10
2
Allows you to dub from DVD to HDD.
<Dubbing menu>
Dubbing
11
1
HDD
DVD
DVD
HDD
12
2
• Disc edit is available for a disc which is not finalized
or DVD+RW.
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU START
Switching HDD / DVD Mode
Press [HDD] to activate the HDD mode.
Press [DVD] to activate the DVD mode.
DVD button
HDD button
DVD button
HDD button
How to Insert a Disc
1) Press [OPEN/CLOSE A] to open the disc tray.
2) Place the disc on the disc tray with its label side facing up.
Align the disc to
the disc tray guide.
3) Press [OPEN/CLOSE A] to close the disc tray.
It may take a while to load the disc
data after the disc tray closes.
To eject the disc:
Press [OPEN/CLOSE A] to open the disc tray, then remove the disc before turning the unit to the standby mode.
• When inserting a brand-new DVD+RW/DVD-RW, the unit automatically starts to format.
• If titles have been recorded on the disc, the title list is displayed. Press [STOP C] to exit the title list.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 27
INITIAL SETTING
You need to follow these steps when you turn on this unit for the first time.
Follow the procedure in “Finding the
Viewing Channel on Your TV” on
page 22 to display “Initial Setup”
menu.
Use [K/ L] to select your desired
language, then press [OK].
Initial Setup
Language
English
Français
Español
Use [K/ L] to select the type of
broadcasting signal, then press [OK].
Initial Setup
Channel Preset
Make sure the antenna is
connected to “ANTENNA IN” jack.
Antenna
Cable (Analog)
Cable (Analog / Digital)
Auto Preset will scan all terrestrial channels.
This may take a while to complete.
The unit will start getting channels available in
your area.
Antenna:
(When using an Antenna)
The channels broadcasted in Analog TV and
Digital TV are automatically scanned and
memorized. Only the receivable channels in the
area will be memorized.
Cable (Analog):
(When using basic cable)
The channels broadcasted in Analog Cable TV
are automatically scanned and memorized.
Cable (Analog / Digital):
(When using basic cable)
The channels broadcasted in Analog Cable TV
and Digital Cable TV are automatically scanned
and memorized.
CH
1
Auto Presetting Now
If a PBS (public broadcasting station) is available
in your area, clock setting may automatically be
performed and the correct clock will be displayed
following the channel preset procedure.
Initial setting is then complete.
Press [RETURN] to exit.
If a PBS (public broadcasting station) is not
available in your area, press [OK]. Then proceed
to step 5 in “Manual Clock Setting” on page 34.
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANNEL SETTING
Auto Channel Scan
If you have changed antenna connection, we recommend that you program available channels in your area with the
following procedures.
Press [MENU] and use [K/ L] to select
“General Setting”, then press [OK].
“General Setting” menu will appear.
Use [K/ L] to select “Channel”, then
press [OK].
“Channel” menu will appear.
Use [K/ L] to select “Auto Channel
Preset”, then press [OK].
Use [K/ L] to select the type of
broadcasting signal, then press [OK].
Auto Channel Preset
Antenna
Cable (Analog)
Cable (Analog / Digital)
The unit will start getting channels available in
your area.
• When using Antenna, Cable Box, or Satellite
Receiver with the RF Coaxial cable, you would
scan with the “Antenna”.
• When connected to Cable TV, select “Cable
(Analog)” or “Cable (Analog/Digital)”.
To cancel the auto channel preset during
scanning:
Press [RETURN] to go the previous screen or
[MENU]
When scanning is over, press [MENU]
• If Auto Scan is cancelled during the scanning, some
channels will not be programmed.
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANNEL SETTING
Adding / Deleting Channels
This feature allows you to manually Add or Delete Channels for any adjustments to your Channel Lineup.
Make sure:
• You perform the “Auto Channel Scan” before adding or deleting the channels.
Press [DTV/TV] to select the mode
(DTV or TV) to/from which you want
to add/delete channels.
Press [MENU] and use [K/ L] to select
“General Setting”, then press [OK].
“General Setting” menu will appear.
Use [K/ L] to select “Channel”, then
press [OK].
“Channel” menu will appear.
Use [K/ L] to select “Manual Channel
Preset”, then press [OK].
Auto Channel Preset
Manual Channel Preset
TV Audio Select
• If you are adding or deleting Analog TV/Cable
ANALOG
channels, go to
to continue.
• If you are adding or deleting Digital TV/Cable
DIGITAL
channels, go to
Instructions continue on the next page.
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANNEL SETTING
ANALOG
Select the channel number to add or
Select the channel number to add or
delete.
[CHANNEL
/
] to cycle through only
• Only the major channel is displayed in “Manual
Channel Preset” menu. (The channel number
displayed in the parenthesis is a virtual channel
number)
• Use [{/ B] to cycle through all the channels
including the ones not memorized.
• Use [the Number buttons] to select a channel
directly.
• When a memorized channel is selected, “Add”
is checked and highlighted as a default.
• When an unmemorized channel is selected
“Delete” is checked and highlighted as a
default.
• Use [CHANNEL
/
] to cycle through only
the memorized channels.
• You cannot use [{/ B] for the digital TV
channel selection.
• Use [the Number buttons] to select a channel
directly.
• When a memorized channel is selected, “Add”
is checked and highlighted as a default.
• When an unmemorized channel is selected
“Delete” is checked and highlighted as a
default.
Use [K/ L] to select “Add” or
“Delete”, then press [OK].
Manual Channel Preset
Use [KL] to select “Add” or
“Delete”, then press [OK]. Then select
CH
2
Add
Delete
• If the setting is complete, press [RETURN] to
Manual Channel Preset
Your setting will be activated and it will
automatically switch to the next channel so that
you can continue adding or deleting channels.
DTV
2
(CH - - - )
Add
Delete
Press [MENU] to exit.
Your setting will be activated.
Press [MENU] to exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 31
SETTING THE CLOCK
Auto Clock Setting
This unit can set the time and date automatically by referring to a channel that carries a clock information. If a PBS
(public broadcasting station) is available in your area, follow “Auto Clock Setting” below. If not, follow “Manual Clock
Setting” on page 34.
Make sure
• The cable TV connections are correct.
• Channels are set. (Refer to page 29.)
Analog Auto Clock Setting
Press [MENU] and use [K/ L] to select
“General Setting”, then press [OK].
“General Setting” menu will appear.
Use [K/ L] to select “Clock”, then
press [OK].
“Clock” menu will appear.
Use [K/ L] to select “Auto Clock
Setting”, then press [OK].
Use [K/ L] to select “Auto”, then
press [OK].
Auto Clock Setting
OFF
Auto
Manual
Press [MENU] to exit.
Press [STANDBY/ON y] to turn the
unit to the standby mode.
This unit will search for the time only when the
power is in the standby mode. Initially leave it in
standby mode for at least 15 minutes to give this
unit time to set the clock. Once the clock is set, the
unit receives the clock data at 12:00 am & 12:00 pm
when unit is in standby mode. Check the time after
the Auto Clock was set, if it is incorrect time then set
the “Auto Clock Setting“ to “OFF” in step 4 above.
Then try “Manual Clock Setting“ on page 34.
• The clock may set itself automatically after you
connect the Antenna/Cable signal and plug in the AC
Power cord.
• For Analog auto clock setting, incorrect time may be
obtained depending on the broadcast information. If
this occurs, set the “Auto Clock Setting” to “OFF” at
step 4 above and try “Manual Clock Setting” on page
34.
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE CLOCK
Manual Auto Clock Setting
If the unit chooses an incorrect PBS channel on Cable
TV, set the PBS channel manually by following the steps
below.
Use [KL] to select the desired time
zone, then press [OK].
Time Zone
Atlantic
Eastern
Central
Mountain
Pacific
Select “Manual” at step 4 in “Analog
Auto Clock Setting” on page 32, then
press [OK].
Alaska
Hawaii
Use [the Number buttons] or [K/ L]
to enter your Cable TV Analog PBS
channel number, then press [OK].
Press [MENU] to exit and turn the
unit to the standby mode.
This unit will search for the time only when the
power is in the standby mode. Initially leave it in
standby mode for at least 15 minutes to give this
unit time to set the clock. Once the clock is set, the
unit receives the clock data at 12:00 am & 12:00 pm
when unit is in standby mode. Check the time after
the Auto Clock was set, if it is incorrect time then set
the “Auto Clock Setting“ to “OFF” in step 4 above.
Then try “Manual Clock Setting“ on page 34.
Set Channel No.
CH
1
Press [MENU] to exit and turn the
unit to the standby mode.
Digital Auto Clock Setting
Note for auto clock setting
• The clock may set itself automatically after this unit
receives the antenna/cable signal and plug in the
power cord.
• If the clock is not set correctly, timer recording does
not work properly.
• Analog off the air broadcasts have ended. Analog
auto clock setting will no longer be available except
via Cable TV. Try digital auto clock setting in this
case.
Press [MENU] and use [K/ L] to select
“General Setting”, then press [OK].
“General Setting” menu will appear.
Use [K/ L] to select “Clock”, then
press [OK].
“Clock” menu will appear.
Use [K/ L] to select “Auto Clock
Setting”, then press [OK].
• For Digital auto clock setting, incorrect time may be
obtained depending on the broadcast information.
If this occurs, set the “Auto Clock Setting“ to “OFF” at
step 4 and try “Manual Clock Setting“ on page 34
Use [K/ L] to select “Manual”, then
press [OK].
Time adjustment for each time zone
Auto Clock Setting
Atlantic
Central
GMT (Greenwich Mean Time ) - 4 hours
GMT (Greenwich Mean Time ) - 5 hours
GMT (Greenwich Mean Time ) - 6 hours
OFF
Auto
Manual
Enable Manual operation to select the DTV
Channel for receiving the Clock Data and
selecting your Time Zone below.
Mountain GMT (Greenwich Mean Time ) - 7 hours
Pacific
Hawaii
GMT (Greenwich Mean Time ) - 8 hours
GMT (Greenwich Mean Time ) - 9 hours
GMT (Greenwich Mean Time ) - 10 hours
Press [{ ] to highlight “CH”. Press
[K/ L] to select “DTV”, then press
[ B] .
Set Channel No.
DTV
1
Use [the Number buttons] or [KL]
to enter the desired major channel
number to receive the Clock Data,
then press [OK].
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE CLOCK
Manual Clock Setting
Daylight Saving Time
When “Daylight Saving Time” is “ON”, the unit clock will
automatically adjust the time in order to fit the daylight
saving time period.
Press [MENU] and use [K/ L] to select
“General Setting”, then press [OK].
“General Setting” menu will appear.
“ON (MAR - NOV)” has been selected as the default.
Use [K/ L] to select “Clock”, then
press [OK].
“Clock” menu will appear.
Press [MENU] and use [K/ L] to select
“General Setting”, then press [OK].
“General Setting” menu will appear.
Use [K/ L] to select “Clock Setting”,
then press [OK].
Use [K/ L] to select “Clock”, then
press [OK].
“Clock” menu will appear.
Use [KL] to select calendar or time,
then press [OK].
Use [K/ L] to select “Daylight Saving
Time”, then press [OK].
Clock Setting
JAN / 06 / 2012 ( FRI )
12 : 00 AM
Use [K/ L] to select “ON (MAR -
NOV)”, “ON (APR - OCT)” or “OFF”,
Use [{/ B] to select an item to set,
and use [K/ L] to select the contents
to suit your preference, then press
[OK] when you finish setting all the
then press [OK].
Daylight Saving Time
ON (MAR - NOV)
ON (APR - OCT)
OFF
ON (MAR - NOV):
Clock Setting
Move forward one hour on the second Sunday in
March and move back one hour on the first
Sunday in November.
JAN / 06 / 2012 ( FRI )
12 : 00 AM
ON (APR - OCT):
Your setting will be activated.
Move forward one hour on the first Sunday in
April and move back one hour on the last
Sunday in October.
The clock starts counting when you press [OK]
Press [MENU] to exit.
Press [MENU] to exit.
Note
• Your setting will be cancelled if you press [MENU]
before pressing [OK] at step 5.
• Your clock setting will be lost if either there is a power
failure or this unit has been unplugged for more than
1 hour when you set the clock manually.
• Though it appears in the OSD, “APR - OCT” daylight
saving time is no longer in use as of 2007 in the U.S.
• For setting the day, year, hour, and minute,
[the Number buttons] can also be used.
• You can set the built-in calendar from the year 2012
up to 2061.
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SETTINGS
About digital TV broadcasting:
With its high definition broadcast, digital broadcasting far
Switching Analog Mode / Digital Mode
surpasses analog broadcasting in both its picture and
sound quality.
You can easily switch the analog TV (NTSC) and digital TV
(ATSC) with the remote control.
What is the minor channel?
Press [DTV/TV] on the remote control.
• The Analog mode and Digital mode switch alternately.
By using high compression technology, digital
broadcasting offers a service that enables multiple signals
to send simultaneously.
Therefore, you can select more than one program per
major channel since digital broadcasting technology
distinguishes between multiple channels broadcast by a
single network.
Channel Selection
Select channels by using [CHANNEL
[the Number buttons] found on remote control.
/
] or
[Air Time]
NTSC (analog mode)
ATSC (digital mode)
[CHANNEL
/
]
18:00
18:30
19:00
19:30
20:00
smallest smallest
CH4-1
Use [CHANNEL
/
] to change the channel.
CH
CH
[the Number buttons]
Press the channel number with [the Number buttons] to
select a channel you want to watch.
CH4-1 CH4-2 CH4-3
CH4
smallest
CH
CH4-1
CH4-3
<Analog TV Channels>
Enter the channel number with [the Number buttons]
select a channel you want to watch.
For 1-digit number
smallest
CH
CH4-1 CH4-2
e.g.) 2 ch:
[0] + [2] [2] + [•] or
minor channel
major channel
[2]
For 2-digit number
e.g.) 12ch:
: change automatically
: change manually by using [CHANNEL
[the Number buttons]
[1] + [2]
/
] or
<Digital TV Channels>
Enter the major and minor channel number with
[the Number buttons] to select a channel you want to
watch.
For 1-digit number
e.g.) 2.1 ch:
major channel
minor channel
[0] + [2] or [2] + [•]
[0] + [1] [1] + [•] or
[1] + leave it for 2 seconds.
For 2-digit number
If 2 channel numbers are pressed consecutively, that
number will become the major channel.
e.g.) 35.1ch:
major channel
minor channel
[3] + [5] + [•]
[1]
• If you enter 1 or 2 digit for major channel and leave it for
2 seconds, the number will be taken as the major
channel and lowest minor channel of the major channel
will be displayed.
• It may take up to 5 to 7 seconds to switch the digital
TV channels.
• In digital TV broadcasting, 2 or more channels, called
minor channels, are simultaneously broadcast on one
main channel, called major channel.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 35
TUNER SETTINGS
Selecting TV Audio
This section describes how to switch the TV audio. When you record a TV program, only the audio selected here will be
recorded.
Digital TV
Press [AUDIO] to cycle through
available audio languages.
English
• When you press [AUDIO], selected language
will be displayed on the TV screen.
• Every time you press [AUDIO], the language
will be switched.
e.g.) English ➔ Spanish ➔ Unknown
• Available languages differ depending on the
broadcast.
• The language information display will
automatically disappear.
• When you record digital TV broadcasting, the
audio language you have selected will be
recorded.
• You cannot change the audio language for the
recording of digital TV broadcasting.
• Pressing [AUDIO] does not control external device
audio.
• When there is only one audio channel on the
broadcast, pressing [AUDIO] does not display
anything.
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SETTINGS
Analog TV
Press [MENU] and use [K/ L] to select
“General Setting”, then press [OK].
“General Setting” menu will appear.
Use [K/ L] to select “Channel”, then
press [OK].
“Channel” menu will appear.
Use [K/ L] to select “TV Audio
Select”, then press [OK].
Use [K/ L] to select “Stereo” or
“SAP”, then press [OK].
TV Audio Select
Stereo
SAP
Stereo:
Outputs main-audio.
SAP (secondary audio program):
Outputs sub-audio.
Press [MENU] to exit.
Note on recording analog TV audio
• When you record an analog TV program available in
second audio or stereo, you have to select either
“Stereo” or “SAP” in “General Setting” menu
beforehand. Refer to the following table to check an
appropriate setting.
Selected
audio
Broadcast
audio
Disc
Audio
recording
output
Stereo
SAP
STEREO+SAP
STEREO
STEREO
STEREO
MONO
MONO
SAP
STEREO
STEREO
MONO
MONO
SAP
MONO+SAP
MONO
STEREO+SAP
STEREO
STEREO
SAP
STEREO
SAP
MONO+SAP
MONO
MONO
MONO
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 37
TUNER SETTINGS
DTV Closed Caption
Digital TV
Digital TV has its own closed captions called DTV CC. Use this menu to change the settings for DTV CC.
Press [MENU] and use [K/ L] to select
“General Setting”, then press [OK].
“General Setting” menu will appear.
Use [KL] to select “Display”, then
press [OK].
Use [KL] to select “DTV CC”, then
press [OK].
Language
Screen Saver
FL Dimmer
DTV CC
CC Style
V-Chip
Use [K/L] to select “Caption Service”,
then press [OK].
DTV CC
Caption Service
Recording
Use [KL] to the desired DTV closed
caption, then press [OK].
Caption Service
OFF
Service1
Service2
Service3
Service4
Service5
Service6
OFF:
Select if you do not want DTV CC. This is the
default.
Service 1 to Service 6:
Select one of these before changing any other
item in the closed caption menu. Choose
Press [MENU] to exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SETTINGS
Closed Caption Style
Digital TV
Digital TV can also change the style of its closed caption such as font, color or size, etc.
Press [MENU] and use [K/ L] to select
“General Setting”, then press [OK].
“General Setting” menu will appear.
Use [KL] to select “Display”, then
press [OK].
Use [KL] to select “CC Style”, then
press [OK].
Language
Screen Saver
FL Dimmer
DTV CC
CC Style
V-Chip
Use [K/ L] to select “User Setting”,
then press [OK].
CC Style
User Setting
Font Size
Font Style
Font Opacity
Font Color
Edge Type
Edge Color
Back Opacity
Back Color
Use [KL] to select “ON”, then press
[OK].
User Setting
ON
OFF
Instructions continue on the next page.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 39
TUNER SETTINGS
<Edge Type>
Edge type of the displayed caption can be
switched as below.
Use [KL] to select the item and
switch the setting for each item you
want to set, then press [OK].
Edge Type
• When “User Setting” is set to “ON”, you can set
the following items. CC style set by “User
Setting” will be displayed.
None
Raised
Depressed
Uniform
L.Shadow
R.Shadow
• The setting description for each item is shown
below.
<Font Size>
<Edge Color>
Font size of the displayed caption can be
switched as below.
Edge color of the displayed caption can be
switched as below.
Font Size
Edge Color
Large
Middle
Small
White
Black
Red
Green
Blue
Yellow
Magenta
Cyan
<Font Style>
Font style of the displayed caption can be
switched as below.
Font Style
<Back Opacity>
Background transparency (Opacity) of the
displayed caption can be switched as below.
Style1
Style2
Style3
Style4
Style5
Style6
Style7
Style8
Back Opacity
Solid
Transparent
Translucent
Flash
<Font Opacity>
Font transparency (Opacity) of the displayed
<Back Color>
Background color of the displayed caption can
caption can be switched as below.
Font Opacity
Back Color
Solid
Transparent
Translucent
Flash
White
Black
Red
Green
Blue
Yellow
Magenta
Cyan
<Font Color>
Font color of the displayed caption can be
switched as below.
Font Color
White
Black
Red
Press [MENU] to exit.
Green
Blue
Yellow
Magenta
Cyan
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON RECORDING
Before you make a recording, read the following information.
This unit can record to DVD+RW, DVD+R, DVD-RW and
DVD-R.
DVD+R/DVD-R can only be recorded to once. DVD+RW/
DVD-RW can be recorded to and erased many times.
DVD-RW/-R will be recorded in the DVD+VR mode
automatically in this unit.
• DVD-RW recorded in the mode other than +VR is not
recordable on this unit unless you erase all contents in
the disc (refer to page 99).
• DVD-R recorded in the mode other than +VR is not
recordable on this unit.
Logos
Attributes
Maximum recordable numbers of title / chapters
HDD :
99 chapters per title
8cm/12cm, single-sided,
single layer disc
Approx. max. recording time
(SLP mode):
DVD :
49 titles per disc
254 chapters per disc
99 chapters per title
DVD+RW
DVD+R
360 minutes (4.7GB) (for 12cm)
108 minutes (1.4GB) (for 8cm)
DVD-RW
DVD-R
• The following discs are recommended for good
recording quality and are proven to be compatible with
this unit. However, depending on the media condition
the unit may not read the disc properly.
Verbatim
DVD+R 8x,
DVD-R 8x,
DVD-RW 4x
DVD+RW 4x,
DVD-RW 2x
JVC
Maxell
SONY
TDK
DVD+R 4x/8x/16x, DVD-R 8x/16x
DVD+R 4x/8x/16x, DVD+RW 4x
DVD+R 4x/8x/16x
Performance of any other discs are not guaranteed.
• You can play back DVD+RW on most DVD players
without finalizing. However, if you have added or
deleted chapters, or made chapters hidden, you
must perform “Make Edits Compatible” before being
able to see those effects on other units. (Refer to
page 100 for more details.) To play back discs other
than DVD+RW on other DVD players, you will need
to finalize. (Refer to page 65.)
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON RECORDING
Recording Mode
You can select a recording mode among 6 options, and
the recording time will depend on the recording mode
you select as follows.
• This unit cannot record to CD-RW or CD-R.
• All high definition pictures will be down
converted to the standard definition pictures
when they are recorded on this unit.
• DVD+RW/+R, DVD-RW/-R and CD-RW/-R recorded on
a personal computer or a DVD or CD recorder may
not be played back if the disc is damaged or dirty or
if there is condensation on the player’s lens.
• If you record a disc using a personal computer, even
if it is recorded in a compatible format it may not be
played back because of the settings of the
application software used to create the disc. (Check
with the software publisher for more detailed
information.)
• Since the recording is made by the VBR (variable bit
rate) method, depending on the picture you are
recording, the actual remaining time for recording
may be a little shorter than the remaining time
displayed on the TV screen.
Recording Recording Video/sound
Disc size
quality
mode
time
(best)
HQ
18 min
SP
SPP
LP
36 min
45 min
54 min
72 min
108 min
60 min
120 min
150 min
180 min
240 min
360 min
61 hrs
8cm Disc
EP
(good)
(best)
SLP
HQ
SP
SPP
LP
12cm Disc
EP
(good)
(best)
SLP
HQ
SP
123 hrs
154 hrs
185 hrs
247 hrs
371 hrs
You cannot record a copy-protected program
using this unit. (Copy-protected signal is included
in DVD-video, some satellite and cable
broadcasts.) Please contact your programming
provider for type of copy protection applied to
program.
SPP
LP
MDR533H
(320 GB)
EP
(good)
(best)
SLP
HQ
SP
100 hrs
201 hrs
251 hrs
302 hrs
403 hrs
604 hrs
208 hrs
417 hrs
521 hrs
626 hrs
835 hrs
1252 hrs
• You cannot record “copy-once only” program’s on
DVD.
SPP
LP
MDR535H
(500 GB)
HDD
(Internal)
EP
(good)
(best)
SLP
HQ
SP
About HDD
HDD is a special device which has high recording density
and is suited for long-time recording or high-speed
cueing but by contrast, has many factors which can cause
breakage. Use HDD on the assumption that you should
dub the recorded programs to a DVD to protect your
precious videos.
SPP
LP
MDR537H
(1 TB)
EP
(good)
SLP
• The recording time is only an estimate. The actual
recording time may differ.
• The audio and video quality gets poorer as the recording
time becomes longer.
• Each time [REC MODE] is pressed, recording mode and
its allowed recording time will be displayed. (Refer to
page 24.)
HDD is a temporary storage location:
HDD is not a permanent storage location of the recorded
contents. Be sure to use it as a temporary storage location
until you watch the programs once, edit them, or dub
them to a DVD.
Be sure to dub (back up) data promptly if you find
abnormalities in HDD:
If there is mechanical trouble with the HDD, grinding or
other sounds may be heard or blocky noise may appear
on the image. If you continue to use as it is, deterioration
may continue and eventually the HDD may not be usable
at all. If you notice these symptoms of a failing HDD,
promptly dub the data to a DVD. When an HDD fails,
recovery of recorded content (data) may be impossible.
About the remaining capacity of HDD recording time:
The on-screen indication of the possible recording time
left on HDD/DVD may differ from the actual recordable
time as this unit employs the variable bit rate encoding
system which varies the recording (storage) amount of
data in conformity with the amount of information on the
video.
Before recording to the HDD, ensure there is sufficient
space on the HDD by deleting unnecessary titles in
advance.
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE RECORDING
Make Recording Compatible
Recording the DTV Closed Caption
You can record the DTV Closed Caption as the part of the
image for the recording program and see the recorded
closed caption even with the TV that is not closed caption
compliant.
Use this feature to make unfinalized +VR mode discs
recorded on another unit recordable on this unit. When
you make an additional recording on this unit with “Make
Recording Compatible” set to “ON”, the title menu is
automatically converted to our style.
1) Press [MENU] and use [K/ L] to select “General
Setting”, then press [OK].
1) Press [MENU] and use [K/ L] to select “General
2) Use [K/ L] to select “Display”, then press [OK].
Setting”, then press [OK].
3) Use [K/L] to select “DTV CC”, then press [OK].
“General Setting” menu will appear.
2) Use [K/ L] to select “Recording”, then press [OK].
“Recording” menu will appear.
3) Use [K/ L] to select “Make Recording Compatible”,
then press [OK].
4) Use [K/L] to select “Recording”, then press [OK].
• If “Caption Service” is set to “OFF”, you cannot select
“Recording”.
5) Use [K/ L] to select “ON”, then press [OK].
4) Use [K/ L] to select “ON” or “OFF”, then press [OK].
Recording
Make Recording Compatible
ON
OFF
ON
OFF
6) Press [MENU] to exit.
ON:
Title list will be replaced when you make
additional recordings to the discs recorded by
other units.
Note
OFF: Prohibiting additional recording to the disc
• If “Caption Service” is set to “OFF”, the caption will
not be recorded.
that has a title list created by other units.
5) Press [MENU] to exit.
Setting for Auto Chapter
Recording from a Cable Box or Satellite
When recording from an external tuner like cable/satellite
box, the box will need to be turned on and set to the
channel you wish to record. You will not be able to watch
another program from the box as the recorder will be
recording the channel the cable/satellite box is set to.
You can set a specified time for chapter marks.
1) Press [MENU] and use [K/ L] to select “General
Setting”, then press [OK].
“General Setting” menu will appear.
2) Use [K/ L] to select “Recording”, then press [OK].
“Recording” menu will appear.
3) Use [K/L] to select “Auto Chapter”, then press [OK].
4) Use [K/ L] to select a desired time option, then
press [OK].
Auto Chapter
OFF
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
5) Press [MENU] to exit.
Note
• The interval for auto chapter may be up to two
minutes different from the time option you set.
• A blank chapter may be created depending on the
remaining time of the disc.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC RECORDING & ONE-TOUCH TIMER RECORDING
Follow the steps to record TV programs.
Insert a recordable disc (refer to page
27 on how to insert a disc).
Align the disc to
the disc tray guide.
* Make sure the disc is compatible with this unit.
(Refer to page 41 for the list of compatible discs.)
It may take a while to load
the disc data after the disc tray closes.
• When inserting a brand-new DVD+RW/DVD-
RW, the unit automatically starts to format.
(Except when HDD is recording, or when there
is a timer program which starts in 15 minutes.)
• If titles have been recorded on the disc, the
title list is displayed. Press [STOP C] to exit the
title list.
Press [REC MODE] repeatedly to
select a recording mode.
Refer to “Recording Mode” on page 42.
DVDꢀSP(2Hr)
0h58m
Select the appropriate external input
channel by pressing [SOURCE] or
[CHANNEL
Press [DTV/TV] to select Analog TV or
Digital TV, then use [CHANNEL
/
].
/
]
or [the Number buttons] and [ • ] (for
Digital TV channels) to select a
desired channel to record.
Refer to “Switching Analog Mode/Digital Mode”
and “Channel Selection“ on page 35.
CH 12
• When playback of a recorded program is blocked by
the V-chip setting, “PROTECTED PROGRAM by **”
appears (** may vary depending on the rating). In
such case, check the V-chip setting. (Please refer to
page 110 for more details.)
Instructions continue on the next page.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC RECORDING & ONE-TOUCH TIMER RECORDING
Press [STOP C] to stop recording.
Press [REC] to start recording.
I HDD” or “I DVD” will be displayed for 4 seconds.
e.g.) DVD
As for DVD recording, the title list will appear
automatically after writing to a disc complete.
(Refer to “Guide to a Title List” on page 83.)
e.g.) DVD+R
I
DVD
SP(2Hr)
2h00m
Press [PAUSE F] to pause recording.
Press [PAUSE F]] or [REC] again to restart
recording.
Please finalize the disc when the writing is
completed before playing back on other DVD
players.
To set one-touch timer recording (OTR)...
This is a simple way to set the recording time in blocks
of 30 minutes.
Writing to Disc
90%
Press [REC] repeatedly until the desired recording time
(30 minutes to 6 hours) appears on the TV screen.
One-touch timer recording will start.
1
SP(2Hr)
NOV/25/12 11:00AM CH12 SP
SUN NOV/25/12 0:20:44
I
0h30m
2
0h30m
1h00m
EMPTY SPACE
1:41:17 SP (2Hr)
(normal recording)
6h00m
5h30m
To change the recording length during the one-
touch timer recording:
Press [REC] repeatedly until the desired length appear.
• Press [STOP C] to exit the title list.
To cancel the one-touch timer recording within the
specified time:
Press [STOP C]
When the recording is completed, the unit will ask
you whether to turn the unit to the standby mode
except under conditions listed below.
- If a timer recording is programmed to start in 5 minutes.
- During playback of HDD or DVD.
- While displaying menus or information on the screen.
• The unit will be turned to the standby mode automatically if
you select “Yes” or if you do not reply in 1 minute.
Note
• When you press [REC] recording starts immediately and continues until the HDD or disc is full, record 12 hours to
HDD or you stop recording.
• This unit cannot record images with an aspect ratio of 16:9. The 16:9 images will be recorded as 4:3.
• When the unit clock has not been set, the space for a date and time of title names will be blank.
• When you record a TV program, you have to select the TV channel audio beforehand. Only the selected channel
audio will be recorded. Refer to “Selecting TV Audio” on pages 36-37 for more details.
• This unit cannot record in both stereo and SAP (secondary audio program) at the same time.
• You cannot change the recording mode during the recording pause mode.
• You can change a channel to be recorded during the recording pause mode.
• You can play back a title on one component while making a recording on other. To do so, simply select the
component (HDD or DVD) you like to use for the playback by pressing [HDD] or [DVD] during HDD/DVD
recording. And then follow the normal playback procedure.
• If playback and recording are in progress at the same time, select the appropriate component by pressing [HDD]
or [DVD] before you press [PAUSE F] or [STOP C] to pause or stop the operation.
Note for one-touch timer recording
• The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press
[DISPLAY] to see it on the TV screen.
• Unlike the timer recording, you can perform the following operations during one-touch timer recording.
- Turning the power to the standby mode to stop one-touch timer recording.
- Using [REC] or [STOP C] on the remote control.
• You cannot use the pause function during one-touch timer recording.
Download from Www.Somanuals.com. All Manuals Search And Download.
AUTOSTART RECORDING
Every time you turn on this unit, this unit automatically records the channel currently viewed and temporarily stores
the recorded content to the HDD (Autostart recording). By using this function, you can pause or go back the TV
program you are currently watching, and you can also start recording the whole TV program even at the middle of the
TV program. The temporary recording can be made up to 6 hours of time range. If the recording exceeds 6 hours, the
earliest recording will be overwritten.
Recording the Contents of the Autostart Recording
For how to playback the autostart recording, refer to “Playing Back the Autostart Recording” on page 78.
When watching TV programs
through this unit’s tuner, use [H],
[E] or [REPLAY ] to locate your
desired point to start recording.
• The autostart recording information will
appear. Refer to page 23.
2:59:44 / 3:31:31
7:10AM
10:42AM
10:10AM
Press [REC] to start recording.
100/100
1/
1
0:00:34 / 0:32:34
2
I
HDD
HDD SP
1h53m
From the selected point, the contents of the
autostart recording become a recording title in
the HDD while the unit continues to record the
current content of the channel.
Press [STOP C] twice to stop
recording.
The recording stops and new autostart recording
begins.
Note
• If you press [STOP C] once, the image on the
TV screen goes back to current content of the
channel while the recording continues.
• In the autostart recording, when you display the DTV
program information, the information will be
recorded as the part of the picture.
• If there is not enough recordable space on HDD to
record from the selected point to current point, you
cannot record the content of autostart recording.
• When you record the content of the autostart
recording, the recording mode will be SP.
• When you are recording the contents of the autostart
recording, if you record the part that is copy-protected,
“Copy guard detected.” appears and you are not able to
watch that part.
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING
You can program the unit to record up to 36 programs within a month in advance. Daily or weekly program recordings
are also available.
Before recording, make sure
• Set the clock before setting a timer programming.
• If you are recording to a disc, insert a recordable disc with enough recordable space.
Press [TIMER PROG.].
Use [K / L] to select “New Program”,
then press [OK].
Timer Programming
THU FEB/09 11:30AM
Skip Date
Start
End
CH
New Program
1/1
• If there are 6 or more programs, use
[H / G] to change pages.
Use [K L] to enter the date, then
press [B].
Skip
OFF
Date
FEB/10
REC To
HDD
Start
- - : - -
Mode
SP
End
- - : - -
CH
DTV 69.1
SP
2h00m
JAN/01
Daily
When pressing [L] at
the current date, the
date will change as
follows.
MON-SAT
MON-FRI
SAT
e.g.) January 1st
FRI
Guide to Timer Programming Display
SUN
3
1
2
JAN/31
Timer Programming
FEB/10/12 10:30 AM 69.1 SP
SP (1:00)
Use [K / L / s / B] or
[the Number buttons] to enter the
start and end time, then press [B].
THU FEB/09 11:30AM
Skip
Date
Start
End
CH
FEB/10
10:30AM 11:30AM DTV69. 1
New Program
6
Skip
OFF
Date
FEB/10
REC To
HDD
Start
10 : 30AM
Mode
End
- - : - -
CH
DTV 69.1
1/1
SP
SP
2h00m
4
5
• You cannot make a Timer Recording program
1 Title of a timer program (Contains date, time, channel,
recording mode of the program)
3 Recording mode, and length of the recording
4 Timer program list
5 Total number of pages and current page (6 pages
maximum)
6 Recording media (“ ” (HDD) or “ ” (DVD))
Instructions continue on the next page.
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING
Use [K L / s B] to select Analog
Auto Recording mode select...
(“- - -”) / Digital (“DTV”) mode or
External input (L1 / L2), then press
[B].
When “Auto” is selected as a Recording mode, the unit
calculates how much time is available on the disc and
selects the Best Recording mode available
automatically to complete Recording the program.
e.g.) external input mode
Skip
OFF
CH
Date
FEB/10
REC To
HDD
Start
10 : 30AM
Mode
End
11 : 30AM
Skip
OFF
Date
FEB/10
REC To
DVD
Start
10 : 30AM
Mode
End
11 : 30AM
CH
DTV 69.1
L1
SP
Auto
Auto
SP
1h00m
1h00m
• “Auto” is only available for One program in the Timer
Program list.
satellite box), select L1 or L2.
Use [K / L] or [the Number buttons] to select
the Channel Number to Record, then press
[B].
For Digital mode, select both Major and
Minor Channels. Refer to “How to Select a
Channel Number for the Timer Recording” on
page 49 for more details.
Alternate recording (DVD only)...
In the following cases, the unit will detect it and
automatically record to the HDD even when DVD is
selected as the recording media.
- If there is no recordable disc in the unit
- If the disc does not have enough space to complete the
recording
- If the material is “copy-once” program and prohibited to
be recorded on a DVD
- If the disc is not available because the repairing process is
cancelled halfway
This feature is available only for Timer Recording. Not
available for One-Touch Timer Recording.
e.g.) analog mode
Skip
OFF
Date
FEB/10
REC To
HDD
Start
10 : 30AM
Mode
End
11 : 30AM
CH
- - - 10
SP
SP
1h00m
Skip
OFF
Date
FEB/10
REC To
HDD
Start
10 : 30AM
Mode
End
11 : 30AM
CH
DTV 69.1
Press [OK] when all items are
SP
SP
1h00m
will appear on the front panel display.
Timer Programming
Use [K / L] to select the Recording
media (“HDD” or “DVD”), then press
[B].
FEB/10/12 10:30 AM 69.01 SP
SP (1:00)
THU FEB/09 11:30AM
Skip
Date
FEB/10
Start
End CH
10:30AM 11:30AM DTV69. 1
New Program
e.g.) recording to DVD
Skip
OFF
Date
FEB/10
REC To
DVD
Start
10 : 30AM
Mode
End
11 : 30AM
CH
DTV 69.1
1/1
SP
SP
1h00m
Your program setting is now stored.
• To set another program, repeat steps 2 to 8.
• To exit, press [TIMER PROG.] or [MENU]
Use [K /L] to select a Recording mode.
• When 2 or more programs are overlapped,
“Timer program overlapped” appears, and the
overlapped program will be displayed in blue.
Skip
Date
FEB/10
REC To
DVD
Start
10 : 30AM
Mode
End
OFF
11 : 30AM
CH
DTV 69.1
SP
SP
1h00m
• To correct the timer program refer to
“Checking, cancelling, or correcting the Timer
Programming information” on page 49.
• You can check the remaining recordable space
of the disc when you select the Recording
Note
• If you have not set the clock yet:
Skip
OFF
Date
FEB/10
REC To
DVD
Start
10 : 30AM
Mode
End
11 : 30AM
Entry screen for the clock setting will appear instead
of the Timer Programming list at step 1. Continue
with the step 5 in “Manual Clock Setting” on page 34
before setting a Timer Programming.
CH
DTV 69.1
SP
SP
1h00m
• Use [s / B] to move the cursor to the left and the
right in the entry screen for the Timer Programming
• You cannot make a Timer Recording program that
exceeds 12 hours.
Instructions continue on the next page.
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING
How to Select a Channel Number for the Timer Recording
Analog TV
For channel number 2-6 press, press [B] or [ • ] to decide the channels. For other channels (7-69),
the channel will be decided as soon as you enter the channel number.
Analog Cable
For channel number 1-12 press, press [B] or [ • ] to decide the channels. For other channels (13-
125), the channel will be decided as soon as you enter the channel number.
Digital TV
For channel number 1-9 press, press [B] or [ • ] to decide the channels. For other channels (10-99),
the channel will be decided as soon as you enter the channel number.
Digital Cable TV
For channel number 1-13 press, press [B] or [ • ] to decide the channels. For other channels (14-
135), the channel will be decided as soon as you enter the channel number.
For channel number 1-9 press, press [B] or [ • ] to decide the channels. For other channels (10-99),
the channel will be decided as soon as you enter the channel number.
• You can decide the 1-digit channel number by pressing 0 first , then enter desired 1-digit channel number.
e.g.) “5”: [0]+[5]
• For selecting the channels with [K / L] you need to press [B] or [ • ] to decide the channel number.
• For selecting the minor channels with [K / L], please make sure the minor channel you are selecting exists.
[K / L] does not skip the non-existing minor channels.
To stop the Timer Recording in progress
Skip the Timer Recording Period
You can deactivate the Timer Recording Period (Daily,
MON-SAT, MON-FRI or Weekly) temporarily.
1) In Stop mode, press [TIMER PROG.].
2) Select the Periodical Timer Recording program you
want to skip using [K / L], then press [OK].
3) Select “Program Change” using [K / L], then press
[OK].
4) Move the cursor to the “Skip” field using [{ /B],
then select “ON” using [K / L] and then press [OK] to
activate the setting.
1) Press [STOP C] on the Remote control.
2) Confirmation message will appear. Select “Yes”, then
press [OK].
• To Stop the Timer Recording immediately, press
[C STOP ] on the unit.
Checking, cancelling, or correcting the Timer
Programming information
1) Press [TIMER PROG.].
2) Check the information.
• “ ” will be displayed on the left side of the timer
program.
Timer Programming
• The setting will go back to “OFF” after the program
is skipped once.
FEB/10/12 10:30 AM 69.01 SP
SP (1:00)
THU FEB/09 11:30AM
Skip
Date
Start
End CH
FEB/10
10:30AM 11:30AM DTV69. 1
New Program
Putting Names on Timer Programs
1) In Stop mode, press [TIMER PROG.].
2) Use [K / L] to select the Program that you want to
edit the timer program name, then press [OK].
3) Use [K / L] to select “Edit Title Name”, then press
[OK].
3-A) To Delete the Timer program:
1 Use [K / L] to select the program you want to
delete, then press [OK].
2 Use [K / L] to select “Delete”, then press [OK].
Confirmation window will appear.
3 Use [K / L] to select “Yes”, then press [OK].
Program Change
Delete
Edit Title Name
3-B) To Correct the Timer program:
A window for entering a title name will appear.
1 Use [K / L] to select the Program you want to
correct, then press [OK].
2 Use [K / L] to select “Program Change”, then
press [OK].
3 Correct the Timer program by using
[K /L /{ /B], then press [OK].
Timer Programming
FEB/10/12 10:30 AM 69.01 SP
SP (1:00)
THU FEB/09 11:30AM
Skip
Date
FEB/10
Start
10:30AM 11:30AM DTV69. 1
End CH
A
B
C
a
b
2
!
c
3
?
1
@
4) Press [TIMER PROG.] to exit.
1/1
4) To enter a Title Name, follow the steps of “Guide to
Edit Title Name” on page 88
Press [TIMER PROG.] to check the Timer Recording in
progress.
5) After entering a Title Name, press [OK].
6) Use [K / L] to select “Yes”, then press [OK]
•
As to the Timer Recording in progress (which is shown in red
in the timer program list), you only can edit the end time.
The changes made during recording will be recognized as
only specific to that recording in progress and it will not
affect the daily or the weekly recording setting.
The program name is now updated.
Instructions continue on the next page.
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING
If the Timer Program did not complete correctly,
the Error number appears in the Timer
Programming list.
Timer Programming
THU FEB/09 11:30AM
Skip
E41
Date
Start
End
CH
FEB/10
10:30AM 11:30AM DTV69. 1
New Program
Each error number means:
E1-22 Recording error other E44
E37-39 than below
Already 254 chapters
recorded
E24
Unrecordable disc
E45
Copy prohibited
program
E25-26 Copy prohibited
program
E46
It is impossible to
record additionally
on a disc recorded
by other units
when setting
“Make Recording
Compatible” to “OFF”.
E29
E30
E35
E36
Disc protected
Disc full
PCA full *1
Already finalized
video format disc
E47
E49
Already 999 titles
recorded on the HDD
E40
Some portion has
not been recorded
because of program
overlapping.
Recording did not
start at the start time.
There was no disc
space on the HDD
at the starting time
for the HDD timer
recording.
E41
E42
Power failed
E50
HDD recording is
cancelled due to the
insufficient disc space
on the HDD.
No disc when
recording
E43
Already 49 titles
recorded
*1 PCA is a disc's space reserved for recording test.
• E23, E27, E28, E31, E32, E33 and E34 are not displayed.
• A program with the error number is grayed in the timer
programming list.
• Timer program with an error number will be cleared
once the entry screen for the program is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING
Hints for Timer Recording
• If there is a power failure or this unit has been unplugged for more than 1 hour, the clock setting and all timer
programming will be lost.
• When recording to a DVD, if a disc is not inserted, the unit will perform the alternate recording to the HDD (refer to
page 48).
• When a timer recording is completed, the unit will ask you whether to turn the unit to the standby mode if there is no
timer recording which starts within 5 minutes, except under conditions listed below.
- During playback of HDD or DVD.
- While displaying menus or information on the screen.
• The unit will be turned to the standby mode automatically if you select “Yes” or if you do not reply in 1 minute.
• When the programmed starting and ending time are earlier than the current time, the setting will not be accepted
and be cleared for redoing.
• If the starting time is earlier and the ending time is later than the current time, the recording will start right after you
press [OK] at step 8 on page 48.
• You cannot change the audio language for the timer recording of digital TV broadcasting.
• Timer recording whose recording time exceeds 12 hours cannot be made.
• It is prohibited to turn the unit to the standby mode from 4 minutes before the programmed starting time.
• It is prohibited to change channel from 15 seconds before the programmed starting time.
• [REC] does not work from 2 minutes before the programmed starting time. If it comes to 2 minutes before the
starting time during regular or one-touch timer recording, the recording in progress will be stopped.
• Playback of DVD/CD is prohibited from 2 minutes before the programmed starting time when the recording media is
DVD. If it comes to 2 minutes before the programmed starting time during DVD playback, the playback will be
stopped.
The Priority of Overlapped Settings
• Timer program which has the earlier start time will be placed first in the timer program list, and be given priority over
the programs with the later start time when timer programs overlap.
• When timer programs overlap, the first 2 minutes (at the longest) of the later recording will be cut off.
• When 2 or more timer programs have the same start time, the program set first will be given priority.
• A timer recording of lower priority will be cancelled or start from the middle.
• Check the overlapped timer programmings and change the priority if necessary.
When the starting time is the same:
A program set previously (PROG. A) has priority.
PROG. A
PROG. B
actual
recording
PROG. A
PROG. B
The first 2 minutes (at the longest) will be cut off.
Note for DVD recording
When the end time of the programming
currently being recorded and the start time
of the subsequent program are same:
The beginning of the PROG. B may be cut off.
• When the recording time of 2 programs are overlapped, or
the end time of a program and the start time of another
program is the same, the first 2 minutes (at the longest) of
the subsequent program will be cut off.
• If the cut-off portion comes up to 3 minute or more, this
program will be displayed with error number E40 in the
timer programming list.
PROG. A
PROG. B
actual
recording
PROG. A
PROG. B
The first 2 minutes (at the longest) will be cut off.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 51
SPECIAL RECORDING
Overwriting from the Beginning of the Title
Overwriting in the Middle of the Title
You can overwrite the existing title from the beginning.
1) Press [STANDBY/ON y].
Make sure that the TV input is set on the unit.
You can overwrite the existing title from the selected
position.
1) Follow the steps 1, 2 and 4 on the left.
2) Load the disc that includes a title to be overwritten.
2) Use [K / L] to select “Play”, then press [OK].
Playback will start.
It takes a while to display
the title list.
Title list will appear.
If the title list does not appear, press [TITLE]
3) Press [PAUSE F] at the point from which you want
to start overwriting.
3) Press [REC MODE] repeatedly to select a recording
mode.
4) Press [REC].
F I DVD”, display menu, channel, and the time lapse
will be displayed as illustrated on the left.
Refer to “Recording Mode” on page 42.
4) Use [K / L] to select a title to be overwritten, then
press [OK].
5) Select the channel you want to record.
(Refer to page 35 on how to select a channel.)
1
SP(2Hr)
NOV/25/12 11:00AM CH12 SP
SUN NOV/25/12 0:20:44
6) Press [REC] again.
Overwriting recording starts.
2
NOV/26/12 11:35AM CH13 EP
MON NOV/26/12 0:10:33
3
7) Press [STOP C] to stop recording.
EMPTY SPACE
1:37:52 SP (2Hr)
This operation may take a
while to be completed.
5) Use [K / L] to select “Overwrite”, then press [OK]
1
SP(2Hr)
Play
Edit
Overwrite
NOV/25/12 11:00AM CH12 SP
SUN NOV/25/12 0:20:44
• Recording mode of the overwriting title is the same
as that of the original (overwritten) title when
overwriting in the middle of the title.
2
6) Select the channel you want to record.
(Refer to page 35 on how to select a channel.)
• Title name will not be overwritten.
e.g.) DVD+RW
selected title number
to be overwritten
1
1
0:00:00
+RW
CH 12
DVD SP(2Hr)
2h00m
DVD
F
I
7) Press [REC].
Overwriting recording starts.
The elapsed-time counter starts running.
8) Press [STOP C] to stop recording.
Title name is also overwritten.
This operation may take a
while to be completed.
Note
• The remaining recording time is displayed on the
bottom right corner of the TV screen during
overwriting.
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL RECORDING
Hints for Overwriting
When you overwrite on the unnecessary title, there were various circumstances such as follows. Please note that
following cases only describe the overwriting without any recording mode discrepancy. To avoid accidental deletion
please check if there is no important title after the overwriting point.
When overwriting title is shorter than the existing title:
(overwriting from the beginning of the title)
overwrite
30 - 180 seconds will be cut off.
recording : A
after
overwriting
existing title : B
title name : B
title name : A
When overwriting title is longer than the existing title:
(overwriting from the beginning of the title)
overwrite
recording : A
after
overwriting
existing title : B
title name : A
overwrite
recording : A
30 - 180 seconds will be cut off.
after
overwriting
existing title : B
existing title : C
title name : A
title name : C
When overwriting in the middle of the title:
overwrite
30 - 180 seconds will be cut off.
recording : A
after
overwriting
existing title : B
title name : B*
title name : B
Overwritten section and the rest of the sections will
have the same title name as the original existing
title (B).
*
Note
• When a title name is overwritten, its index picture is also overwritten.
• “Auto Chapter” interval time is reset at the overwriting start point.
• A chapter mark is put at the beginning of the overwrite title when overwriting in the middle of the title.
Download from Www.Somanuals.com. All Manuals Search And Download.
DUBBING
Information on Dubbing
You can dub the contents of the HDD to DVD or vice versa. Before you start dubbing, refer to pages 41-43 to see the
recording compatibility.
Guide to Dubbing Menu Display
Recording Mode for Dubbing
“High”
This unit is compatible with the high speed dubbing from
HDD to DVD.
If you dub a title recorded in SLP mode to DVD+R/-R,
dubbing speed will be 24 times at the maximum. To
perform the high speed dubbing, set the recording mode
to “High”. Dubbing speed will vary depending on original
recording mode.
• Duration of high speed dubbing will vary depending on
the recording mode or the title amount.
HDD
DVD
1
2
ABCDE
HQ (1Hr) (0:30:00) JAN/ 9/2012
Dubbing List
1.ABCDE
3000 MB
4
5
6
Add
2.JAN/ 9/12 1:00AM CH22
3.JAN/12/12 11:00AM CH96
Delete All
Dubbing Start
3
1/1
1 Dubbing direction
2 Selected title information
3 Dubbing menu
4 Remaining recordable space
5 Dubbing list
• High speed dubbing is not available when;
- recording mode is set to other than “High”.
- dubbing from a DVD to the HDD.
- there is not enough space in the disc.
6 Current page number/total number of pages
• During dubbing (except for high speed dubbing), you can
[C STOP] on the front panel or press and hold [STOP C]
for 2 seconds on the remote control, and any other buttons
“Auto”
When “Auto” is selected as a recording mode, the unit
calculates how much time is available on the disc and
selects the best recording mode available automatically.
• The recording may be cut short when the available
recording space of the disc is too limited.
Note on dubbing
• During normal dubbing, you can watch the playback
picture of the title being dubbed (the audio cannot
be changed). During high speed dubbing, however,
the playback picture will not appear.
• Dubbing of a “copy-once only” program is not
possible with this unit.
• If you stop the dubbing halfway, the contents will be
dubbed up to the point where you stop the dubbing
(except for the high speed dubbing). With high
speed dubbing, nothing will be dubbed if you stop it
halfway.
• To stop the dubbing in progress, press [C STOP] on
the front panel or press and hold [STOP C] for 2
To dub from a finalized DVD to HDD, please refer
to “One-touch Dubbing...” on page 62.
Other modes
Refer to page 42 for the information on other modes.
Download from Www.Somanuals.com. All Manuals Search And Download.
DUBBING
Setting for an External Device
Connect the external device properly to the unit by using either L2 and L3 (Front) or L1 (Rear) input jacks.
When connecting an external device of monaural output to this unit, use AUDIO L jack of L2 (Front) or L1 (Rear).
Use S-Video or the RCA audio/video cables for this connection.
When connecting a DVC (digital video camcorder), use DV-IN jack of L3 (Front).
RCA audio cable
Connecting to an External Device
Using the RCA cables
RCA video cable
L2
front of this unit
VIDEO
OUT
AUDIO OUT
S-VIDEO
OUT
R
L
or
external device
(camcorder, VCR etc.)
VIDEO VIDEO
IN OUT
Y
L
L
R
R
IN
OUT
COAXIAL
AUDIO IN
(L1)
ANTENNA
S-VIDEO AUDIO OUT
S-VIDEO
L1
rear of this unit
VIDEO
IN
RCA video cable
L
RCA audio cable
R
AUDIO IN
(
)
L1
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
RCA audio cable
S-Video cable
Connecting to an External Device
Using an S-Video cable
L2
front of this unit
VIDEO
OUT
AUDIO OUT
S-VIDEO
OUT
R
L
or
external device
(camcorder, VCR etc.)
VIDEO VIDEO
Y
IN
OUT
L
L
R
R
IN
OUT
COAXIAL
AUDIO IN
(L1)
ANTENNA
S-VIDEO AUDIO OUT
S-VIDEO
rear of this unit
L1
VIDEO
IN
L
RCA audio cable
R
IN
AUDIO IN
S-VIDEO
(
)
L1
S-Video cable
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
Download from Www.Somanuals.com. All Manuals Search And Download.
DUBBING
DV cable (4-pin)
Connecting to an External Device
Using a DV cable
RCA audio cable
L3
external device
front of this unit
(camcorder, VCR etc.)
S-VIDEO
OUT
VIDEO
OUT
AUDIO OUT
DV-OUT
L
R
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
Use [K / L] to select the input jack
type to connect, then press [OK].
If you want to use VIDEO IN, select “Video In”.
If you want to use S-VIDEO IN, select
“S-Video In”.
L1 (Rear)
Video In
S-Video In
Press [MENU] to exit.
Press [MENU] and use [K / L] to select
• Please contact the external device manufacturer if
you have any problem with it.
“General Setting”, then press [OK].
“General Setting” menu will appear.
Use [K / L] to select “Video”, then
press [OK].
Submenu will appear.
Use [K / L] to select “Video Input”,
then press [OK].
Use [K / L] to select desired external
input, then press [OK].
Video Input
L1 (Rear)
L2 (Front)
Download from Www.Somanuals.com. All Manuals Search And Download.
56 EN
DUBBING
Recording from an External Device
Before recording from an external device, refer to the instructions for the connection on page 55.
Insert a recordable disc (refer to page
27 on how to insert a disc).
It may take a while to load the disc
data after the disc tray closes.
Select the appropriate external input
channel (L1, L2 or L3) by pressing
[SOURCE] or [CHANNEL
].
• If the external device is connected to the rear
of this unit, select L1.
• If the external device is connected to the front
of this unit, select L2 or L3.
• If you are connecting the digital video
camcorder to the DV-IN input of this unit, refer
to pages 58-60.
• You can also select L1 or L2 channel by using
[the Number buttons]
e.g.) For L1, press [0] [0] [1]
For L2, press [0] [0] [2].
For L3, press [0] [0] [3]
Press [REC MODE] repeatedly to
select a recording mode.
Refer to “Recording Mode” on page 42.
Press [I RECORD] on the unit to start
recording.
Start playback on the external device
to record from.
Press [C STOP] on the unit to stop
recording.
This operation may take a
while to be completed.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 57
DUBBING
Information on DV Dubbing
Guide to DV and On-Screen Display
This function helps you to easily dub the contents of the DVC (Digital Video Camcorder) to HDD or DVD.
You can control basic operations of the DVC from the remote control of this unit such as playback, fast forward or
reverse and stop all operations if the DVC is in video mode. Use the DV cable that has 4-pin input jack and is
compliance with the IEEE1394 standards. When you connect to DV-IN jack on the front of this unit, select “L3(DV-IN)”
position by using [SOURCE] or [CHANNEL
information for the operation of your DVC.
/
] on the remote control and press [DISPLAY] to show the DV dubbing
When the DVC is
in video mode...
When the DVC is not
in camera mode...
1
1/
1
1/
1
1/
1
1/
1
+RW
+RW
Control
DV Audio
Start Rec
DVD
Stereo1
L3 (DV-IN)
AB-1234
0:12:34
L3 (DV-IN)
AB-1234
0:12:34
5
2
what mode of DVC.
Switch the mode on the DVC to
playback mode for the dubbing
information.
DVD SP(2Hr)
1h00m
DVD SP(2Hr)
1h00m
3
4
7
6
1. DV icon
6. Product name of your DVC
2. Indicator of active device
• If the unit cannot recognize the
input signal from the DVC or the
unknown product, “No Device” or
“****” will appear instead.
7. Status of the current operation
and the time counter
• When “Control” is highlighted,
press [OK] to display the item
selection. Use [K / L] to select the
device you wish to operate, then
press [OK] to activate.
• Select “HDD”/“DVD” to control
Each icon means (Available icons may vary depending on the DVC):
this unit.
DVC is in stop mode.
DVC is in playback mode.
DVC is in pause mode.
DVC is fast forwarding.
(in stop mode)
DVC is fast reversing.
(in stop mode)
DVC is fast reversing.
(standard speed)
• Select “DV Input” to control your
DVC.
3. Recording audio mode
• With DVC in stop mode while
other sources are available, then
“DV Audio” can be selected. Press
[OK] to display the item selection
and then use [K / L] to select the
audio you wish to output. Press
[OK] again to activate.
• Select “Stereo1” to dub the stereo
sound.
• Select “Stereo2” to dub the sound
with after recording sound.
• Select “Mix” to dub the stereo1
and stereo2.
DVC is fast reversing.
(faster than above)
DVC is fast reversing.
(faster than above)
DVC is in slow reverse
playback.
DVC is recording.
DVC is fast forwarding.
(standard speed)
DVC is fast forwarding.
(faster than above)
DVC is fast forwarding.
(faster than above)
DVC is slow forwarding.
(standard speed)
DVC is in recording pause
mode.
DVC is slow forwarding.
(faster than above)
4. Indicator of dubbing function
• When the unit is ready for
dubbing, “Start Rec” will appear.
DVC is slow forwarding.
(faster than above)
• When the unit is dubbing, “Pause
Rec” will appear.
5. Channel position
• When you select “L3(DV-IN)” by
using [SOURCE] or
[CHANNEL
will appear.
/
], “L3(DV-IN)”
Download from Www.Somanuals.com. All Manuals Search And Download.
DUBBING
DVC to HDD / DVD Dubbing
Before recording from DVC, see page 55 for connection instructions.
Use [SOURCE] or [CHANNEL
select “L3(DV-IN)”.
/
] to
L3 (DV-IN)
AB-1234
0:00:00
Press [REC MODE] repeatedly to
select a recording mode.
(Refer to page 42.)
Press [DISPLAY].
Press [OK] to display the item
selection. Use [K / L] to select
“DV Input”, then press [OK].
1/
1
1/
1
+
RW
DVD
DV Input
L3 (DV-IN)
AB-1234
0:12:34
DVD HQ(1Hr)
1h00m
Press [PLAY B] to find where you
wish to start dubbing. Then, press
[STOP C] where you wish to start
dubbing.
Instructions continue on the next page.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 59
DUBBING
Use [K / L] to select “Start Rec”, then
press [OK].
The dubbing will start.
To stop dubbing;
A) Press [C STOP] on the unit. or
B) Use [K / L] to select “Control”,
then press [OK].
Use [K / L] to select “HDD” /
“DVD”, then press [OK].
Then press [STOP C].
Note for DV dubbing
• If you press [PAUSE F] at step 5, the tape will rewind to the point a few seconds preceding the paused point.
When you press [OK] at step 6, then, it will start dubbing when it comes to the paused point.
• The unit does not send out the output signal to DVC.
• For the proper operation, connect DVC to the unit directly. Do not connect this unit and DVC via any other unit.
• Do not connect more than 1 DVC.
• The unit can only accept DVC. Other DV device such as cable/satellite box or D-VHS VCR cannot be recognized.
• If no video signal is detected from the DVC during DVC to HDD or DVD dubbing, the recording will be paused and
I” will flash on the TV screen. The recording will resume when the unit detects the video signal again.
• When the DVC is in camera mode, refer to “Guide to DV and On-Screen Display” on page 58.
• Date/time and cassette memory data will not be recorded.
• Pictures with a copy-guard signal cannot be recorded.
• A DV terminal is a terminal that can use the transmission mode conforming to the IEEE 1394 standards called “Fire
Wire”. It serves as the interface that connects the PC and peripheral device such as “i.LINK” (registered trademark
of SONY). It enables digital dubbing between DV devices with little degradation.
• You cannot dub from DVC to both HDD and DVD at the same time.
• Please contact the DVC manufacturer if you have any problem with it.
Download from Www.Somanuals.com. All Manuals Search And Download.
DUBBING
Selected Title Dubbing
Press [MENU] in stop mode.
Use [K / L] to select “Dubbing”, then
press [OK].
Menu
General Setting
Timer Programming
Title List
Disc Edit
HDD Menu
Dubbing
Use [K / L] to select “HDD DVD”,
then press [OK].
Use [K L] to select “DVD HDD”,
then press [OK].
e.g.) HDD ➔ DVD
Dubbing
HDD
DVD
DVD
HDD
Use [K L] to select “Add”, then press
[OK].
HDD
DVD
3000 MB
Dubbing List
Add
Delete All
Dubbing Start
1/1
• If you have registered any dubbing before,
they will be listed in the dubbing list.
Use [K L s B] to select a desired
title, then press [OK].
At the upper left of each title, the number will
appear in the order of selection
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 61
DUBBING
Repeat step 5 until you register all
the titles to be dubbed, then press
[DUBBING].
e.g.) HDD
Use [s B] to select a desired
recording mode, then press [OK].
e.g.) HDD ➡ DVD
HDD
DVD
Title List
ABCDE
Please select REC MODE.
SP SPP LP EP
12:00AM (10:00:00) FRI JAN/ 6/12 CH10 SP
High HQ
SLP Auto
1
1
2
3
3
6
Dubbing Titles
500 MB
3000 MB
2
4
5
5
4
1 / 6
Press ‘DUBBING’ to confirm.
Confirmation message will appear.
• Depending on the dubbing direction, the
available recording mode varies.
• When dubbing from HDD to DVD, you can
select “High” to perform the high speed
dubbing (refer to “Recording Mode for
Dubbing” on page 54 for more details).
The titles are now registered in the dubbing list.
When you go back to the title list to add another
title, titles already registered are shown with a
check mark.
To delete a title:
1 Go to the Dubbing List, then use [K / L] to
select a title. Then press [OK]
2 Use [K / L] to select “Delete”, then press
[OK]
Use [K / L] to select “Yes”, then press
[OK].
Start Dubbing?
3 Use [K / L] to select “Yes”, then press [OK]
Yes
No
To move a title:
1 Go to the Dubbing List, then use [K / L] to
select a title. Then press [OK]
2 Use [K / L] to select “Move”, then press [OK]
3 Use [K / L] to select a desired insert point,
then press [OK]
Dubbing will start.
• It may take awhile to prepare for the dubbing.
To stop the dubbing in progress:
Press [C STOP] on the front panel.
Press and hold [STOP C] for 2 seconds on the
remote control.
When you are dubbing from HDD to DVD, the
confirmation message will appear, then select
“Yes”.
To erase all the titles in the dubbing title list:
1 Use [K / L] to select “Delete All” in the
Dubbing Menu, then press [OK]
Use [K / L] to select “Yes”, then press [OK]
• To go back and forth between dubbing menu
and dubbing list, use [s / B]
One-touch Dubbing...
With one-touch dubbing, you can start dubbing right
away with just one touch.
To dub the contents in a DVD which is finalized on
other unit, use this function.
During playback of the title you want to dub, press
[DUBBING].
If you are playing back a DVD, DVD to HDD dubbing will
start right away.
If you are playing back HDD, HDD to DVD dubbing will
start right away.
After adding all the titles you want,
use [K L] to select “Dubbing Start”
in the Dubbing Menu, then press
[OK].
• The dubbing will start from the beginning of the title
being played back.
• The unit will dub only the title being played back.
• When dubbing from HDD to DVD, recording mode will
automatically be set to “High” whenever the conditions
are met (refer to page 54). Otherwise, the last selected
recording mode will automatically be applied.
To stop the dubbing in progress:
[C STOP] on the front panel.
Press and hold [STOP C] for 2 seconds on the remote
control.
When you are dubbing from HDD to DVD, the
confirmation message will appear, then select “Yes”.
Download from Www.Somanuals.com. All Manuals Search And Download.
DUBBING
One Title Dubbing (HDD to DVD only)
This function lets you select one specific title from the title list for dubbing.
Press [HDD] first.
Press [TITLE].
Use [K / L / s / B] to select a desired
title to dub, then press [OK].
Use [K / L] to select “Dubbing”, then
press [OK].
Resume Playback
Play From Start
Edit
Title Delete
Delete Multiple Titles
Dubbing
Use [K / L] to select “Yes”, then press
[OK].
Start Dubbing?
Yes
No
Dubbing of the selected title will start.
To stop the dubbing in progress:
Press [C STOP] on the front panel.
Press and hold [STOP C] for 2 seconds on the
Download from Www.Somanuals.com. All Manuals Search And Download.
PROTECTING A DISC
To prevent accidental recording, editing or erasing of the titles, you can protect them from the “Disc Edit” menu.
Press [MENU].
Use [K L] to select “Disc Edit”, then
press [OK].
Use [K L] to select “Disc Protect OFF
ON”, then press [OK].
e.g.) DVD+RW
Disc Edit
Edit Disc Name
Erase Disc
Make Edits Compatible
Disc Protect OFF
ON
Use [K L] to select “Yes”, then press
[OK].
Protect this disc?
Yes
No
The disc is now protected.
This operation may take a
while to be completed.
Note
To cancel the disc protection:
• When you insert a disc protected with this unit,
“Disc Protect ON OFF” will appear instead of “OFF
ON” at step 3.
Disc Edit
Edit Disc Name
Erase Disc
Make Edits Compatible
Disc Protect ON
OFF
To release the protection for the disc, select “Disc
Protect ON OFF” at step 3, then follow rest of the
procedures.
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING THE DISCS ON OTHER DVD PLAYERS
Finalizing a Disc
You will need to finalize DVD+R, DVD-RW or DVD-R to play them back on other DVD players.
Finalizing may take several minutes up to an hour.
A shorter recording period on the disc will require a longer time period for finalization. Do not unplug the power cord
during finalization.
Press [MENU].
Use [K / L] to select “Disc Edit”, then
press [OK].
“Disc Edit” menu will appear.
Use [K / L] to select “Finalize”, then
press [OK].
Use [K /L] to select “Yes”, then press
[OK].
Finalize disc?
Yes
No
Finalizing will start.
Finalizing
90%
To cancel finalizing...
(DVD-RW only)
• To cancel finalizing at step 4, press [STOP C], select
“Yes” with [K /L], then press [OK]. Finalizing is
cancelled and the unit will be in stop mode.
Do you want to cancel ?
Yes
No
• Once you started finalization, no controls are
available. You cannot cancel or stop the finalizing
mode. Please wait until it finishes the finalization
process.
Finalizing
5%
• If
appears when pressing [STOP C], you cannot
cancel finalizing because the finalizing has been in
certain progress.
• When selecting “No” and pressing [OK] or [RETURN]
finalizing will be continued.
• There is no need to finalize DVD+RW.
• When you insert a DVD-RW finalized with this unit,
“Undo Finalize” will appear instead of “Finalize”.
Disc Edit
Edit Disc Name
Erase Disc
Undo Finalize
• You cannot cancel finalizing a DVD+R/DVD-R disc
once it has started.
Disc Protect ON
OFF
This operation may take a
while to be completed.
To release the finalizing for the disc, select “Undo
Finalize” at step 3.
* DO NOT turn the power off or place unit in standby
mode during finalization, this will result in a
malfunction.
Finalizing is completed.
Press [STOP C] to exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 65
PLAYING THE DISCS ON OTHER DVD PLAYERS
Auto Finalizing
You can finalize discs automatically using this function. You can use this function to finalize discs after finishing timer
recordings and at the end of the disc space.
Press [MENU] and use [K / L] to select
“General Setting”, then press [OK].
“General Setting” menu will appear.
Use [K / L] to select “Recording”,
then press [OK].
“Recording” menu will appear.
Use [K L] to select “Auto Finalize”,
then press [OK].
Use [K L] to select “Disc Full” or
“End of Timer Rec”, then press [OK].
Auto Finalize
Disc Full
End of Timer Rec
Use [K / L] to select “ON”, then press
[OK].
e.g.) “Disc Full”
Disc Full
ON
OFF
Your setting will be activated.
Press [MENU] to exit.
• This function is not available after finishing a daily or
weekly Program Recording.
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON PLAYBACK
Before you play back a DVD, read the following information.
Playable Discs and Files
Unplayable Discs
This unit is compatible to play back the following discs.
To play back a DVD, make sure that it meets the
requirements for region codes and color systems as
described below. You can play back discs that have the
following logos. Other disc types are not guaranteed to
play back.
The following discs will not play back on this unit.
• CD-ROM
• DVD-RAM
• DVD-ROM
• Compact Disc-Interactive (CD-I)
• Video Single Disc (VSD)
• DVD-audio
• Unfinalized disc
•
• DVD-R or DVD-RW recorded in VR mode or non
compatible recording format
Playable discs
Logos
• Blu-ray Disc
• Super Video CD
On the following disc, the sound may not be heard.
• Super Audio CD - Only the sound on the CD layer can be
heard. The sound on the high-density super audio CD
layer cannot be heard.
• HD DVD
DVD-video
DVD+RW
DVD+R
Color Systems
DVD is recorded in different color systems throughout
the world. The most common color system is NTSC
(which is used primarily in the United States and Canada).
This unit uses NTSC, so a DVD you play back must be
recorded in the NTSC system. You cannot play back a
DVD recorded in other color systems.
DVD-RW
(Finalized video mode discs only)
DVD-R
(Finalized video mode discs only)
Region Codes
This unit has been designed to play back a DVD
with region 1. A DVD must be labeled for ALL
regions or for region 1 in order to play back on
the unit. You cannot play back DVDs that are
labeled for other regions. Look for the symbols
on the right on your DVD. If these region
symbols do not appear on your DVD, you cannot
play back the DVD in this unit.
CD-DA (audio CD)
video CD
The number inside the globe refers to region of the
world.
A DVD labeled for a specific region can only play back on
the unit with the same region code.
CD-RW
CD-R
KODAK Picture CD
Playable files
Media
DVD+RW/+R
DVD-RW/-R
CD-RW/-R
JPEG
is a trademark of DVD Format/Logo Licensing Corporation.
• This unit may not be able to play back discs recorded
on PC’s or other recorders.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 67
INFORMATION ON PLAYBACK
PBC (playback control) for Video CD
Hint for HDD / DVD Playback
The contents of HDD/DVD are generally divided into
titles. Titles may be further subdivided into chapters.
You can select images or information on the menu
screen by activating the PBC (playback control) function
of the video CD.
This unit conforms to ver.1.1 and ver. 2.0 of video CD
standard with PBC function.
Ver.1.1 (without PBC function): You can enjoy playback
picture as well as music CD.
HDD/DVD
title 1
title 2
chapter 1 chapter 2 chapter 1 chapter 2 chapter 3
Ver.2.0 (with PBC function): While using a video CD with
PBC function, “PBC” appears on the TV screen.
track 1
track 2
track 3
track 4
track 5
file 5
• PBC setting turns to “ON” when loading video CD
with PBC function, thus, even after setting PBC to
“OFF” and ejecting the video CD then reloading the
video CD, this setting turns to “ON” automatically.
JPEG
file 3
• Some operations cannot be performed while PBC
function is on. Cancel PBC function temporarily to
perform those operations by following the
instruction below.
folder 1
file 1
folder 2
file 4
file 2
1) Press [MENU].
2) Use [K / L] to select “DISC Playback Mode”, then
press [OK].
“DISC Playback Mode” menu will appear.
3) Use [K / L] to select “PBC (Video CD only)”, then
press [OK].
4) Use [K /L] to select “ON” or “OFF”, then press [OK].
Your setting will be activated.
You can play back interactive software using menu
screens. Refer to instructions in the video CD.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Direct Playback
Insert a disc (refer to page 27 on how
to insert a disc).
Align the disc to
the disc tray guide.
* Make sure the disc is compatible with this unit.
(Refer to page 67 for the list of compatible discs.)
It may take a while to load the disc data
after the disc tray closes.
Press [PLAY B] to start playback.
If you are playing back a DVD-video or video CD
with PBC function, a menu may appear.
Refer to “Using the Title/Disc Menu” on page 73.
Press [STOP C] once to stop playback
temporarily.
• Refer to “Resume Playback” on page 74.
Note
• Some discs may start playback automatically.
• You can select images or information on the menu
screen by activating PBC (playback control) function
(page 68).
• If you insert a disc when the unit is in HDD mode,
playback will start automatically when you press
[DVD].
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 69
BASIC PLAYBACK
Playback from the Title List
Insert a disc (refer to page 27 on how
to insert a disc).
* Make sure the disc is compatible with this unit.
(Refer to page 67 for the list of compatible discs.)
It may take a while to load the disc data
after the disc tray closes.
For HDD, press [TITLE] to call up the
title list. For DVD, the title list will
automatically appear when you
insert a disc. Otherwise, press [TITLE]
or [DISC MENU].
• To exit the title list, press [STOP C]
• To resume the title list, press [TITLE]
Use [K / L // s / B] to select a desired
title, then press [OK].
<HDD title list>
Title List
JAN/ 9/12 12:00AM CH10 SP
12:00AM (1:00:00) MON JAN/ 9/12 CH10 SP
1
2
3
6
4
5
1 / 6
<DVD title list>
1
SP(2Hr)
NOV/25/12 11:00AM CH12 SP
SUN NOV/25/12 0:20:44
2
NOV/26/12 11:35AM CH13 EP
MON NOV/26/12 0:10:33
3
EMPTY SPACE
1:37:52 SP (2Hr)
• For video CD, when “PBC (Video CD only)” in
the “DISC playback Mode” menu is set to “ON”,
the video CD main menu will appear when
inserting a disc. In such case, select a
numbered menu with [the Number buttons]
• Press [G] (for HDD)/[B] (for DVD) to display
the next page, and press [H] (for HDD)/[{]
(for DVD ) to display the previous page.
Note
• Some discs may start playback automatically.
• You can also start playback by pressing [PLAY B]
instead of [OK] at step 3.
Instructions continue on the next page.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Use [K L] to select “Play” (for DVD),
or select “Resume Playback” or “Play
from Start” (for HDD), then press [OK].
e.g.) DVD
1
SP(2Hr)
Play
Edit
Overwrite
NOV/25/12 11:00AM CH12 SP
SUN NOV/25/12 0:20:44
2
NOV/26/12 11:35AM CH13 EP
MON NOV/26/12 0:10:33
3
EMPTY SPACE
1:37:52 SP (2Hr)
Playback will start.
Press [STOP C] once to stop playback
temporarily.
• Refer to “Resume Playback” on page 74.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Playing Audio Discs and Picture Discs
Press [DVD] first.
Insert a playable disc (refer to page 27
on how to insert a disc).
* Make sure the disc is compatible with this unit.
(Refer to page 67 for the list of compatible discs.)
It may take a while to load the disc data
after the disc tray closes.
When an audio CD is inserted, the track list will
appear.
When a disc with JPEG files is inserted, the file
list will appear.
• To exit the track/file list, press [STOP C]
• To resume the track/file list, press [TITLE]
Use [K L] to select a desired folder
or track/file, then press [OK].
e.g.) File list
File List
DISC NAME
Folder1
Folder2
JPEG file1
JPEG file2
JPEG file3
JPEG file4
JPEG file5
JPEG file6
1/ 2
When selecting track/file:
Playback will start.
When selecting the folder (Not available for audio CD):
The files in the folder will appear.
Use [K / L] to select the file or folder you want to play
back, then press [OK]
• Press [PLAY B] [OK] or [B] to move to any lower
• Press [s] or [RETURN] to move back to the previous
hierarchy.
Hints for audio CD tracks and JPEG files:
• Folders are shown by
• Audio CD tracks are shown by
• JPEG files are shown by
• The system can recognize up to 255 folders, up to 99
tracks/999 files.
• Letters of a file/folder name overflowing the given space
will be displayed as “...”. Unrecognizable characters will
be replaced with asterisks.
• If there are no files in the folder, “No Files” will be displayed.
It is recommended that files to be played back in this
unit are recorded under the following specifications:
<JPEG>
• Upper limit
• Lower limit
: 6,300 x 5,100 dots.
: 32 x 32 dots.
• File size of image maximum : 12 MB.
• Files whose extension is other than “.jpg/.jpeg(JPEG)”
will not be listed.
• Some unplayable folders or files may be listed due to
the recording status.
• High-resolution JPEG files take longer to be displayed.
• Progressive JPEG files (JPEG files saved in progressive
format) cannot be played back on this unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
KODAK Picture CD
Using the Title / Disc Menu
The Picture CD is a service to convert photographs taken
by a conventional film camera into digital data and write
the data on a CD. You can enjoy picture images on the TV
set by playing back the Picture CDs.
For details of KODAK Picture CD, contact a shop that
provides developing service of Kodak Inc.
DVD or video CD with PBC function may contain a title
list, which describes the contents of the disc, or a disc
menu, which guides you through the available functions
in the disc.
1)Press [TITLE].
Press [DVD] first.
Picture CD
Image 1
1)Insert a disc (refer to page 27 on how to insert a disc).
* Make sure the disc is compatible with this unit. (Refer
to page 67 for the list of compatible discs.)
1
4
2
5
3
6
It may take a while to load the disc
data after the disc tray closes.
2)Press [TITLE] or [DISC MENU] to call up the title list
or disc menu.
1 / 2
• To exit the Picture CD thumbnail List, press [RETURN]
or [STOP C].
Arrow icons mean the title list includes a next or
previous page. Use [{ / B] in the direction of the
icon you wish to follow. You can also quick review the
six thumbnails at once between the first and last
pages by pressing [H] / [G]
3)Use [K / L / { / B] to make a selection, and then
press [OK] to enable your selection.
4)Press [STOP C] to exit.
Note
• You can select a numbered menu with
[the Number buttons] also.
2)Use [K / L / { / B] to select a desired track to be
played back, then press [PLAY B] or [OK].
An image will be played back from the selected track
and go to the next one in turn.
• Menus vary among discs. Refer to the information
accompanying the disc for details.
[TITLE] or [DISC MENU] will not always be active
with all DVD.
• For video CD, when “PBC (Video CD only)” in “DISC
Playback Mode” menu is “ON”, the video CD main
menu will appear when inserting a disc.
3)Press [STOP C] to stop playback.
• Press [TITLE] to display the thumbnail again.
Pause
• After track is displayed for 5 seconds or 10 seconds
(set in “Slide Show” on page 77) the display moves to
1)During playback, press [PAUSE F].
Playback will be paused.
During JPEG or KODAK Picture CD playback, press
[B] or [{] to rotate a picture 90 degrees clockwise
or counterclockwise respectively.
(Not available when the display menu appears.)
F
2)Press [PLAY B] to return to the normal playback.
Note
• On DVD, set “Still Mode” to “Field” in “Playback”
menu if pictures in pause mode are blurred. (Refer to
page 108.)
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Resume Playback
Note
• Forward/reverse speed will be indicated with icons
as follows.
You can play back from where you last stopped the disc.
forward (approx. speed)
2x:
1)During playback, press [STOP C].
The resume message will appear.
20x:
40x:
Resume ON
reverse (approx. speed)
20x:
40x:
2)Press [PLAY B].
In a few seconds, playback will resume from the point
at which it stopped last. You can resume playback at
the same point even if you turn the unit to the standby
mode (HDD/DVD only).
To cancel the resume playback and start playing back
the disc from the beginning, press [STOP C] again
while the playback is stopped.
Variable Skip / Variable Replay
During playback, you can skip forward or backward by
the amount of time you set in “Playback” menu. To set
For HDD:
You can set a resume point per every title.
For DVD+RW/+R, DVD-RW/-R, Video CD, Audio CD
and JPEG files:
the time amount, refer to “
page 108.
Variable Skip/Replay” on
During playback, press [SKIP
] if you want to skip
You can set only one resume point per disc.
forward. Press [REPLAY ] if you want to skip
• For JPEG files, playback will resume from the
beginning of the file at which playback was stopped.
Rapid Playback
• Resume Playback is available when you play back the
video CD without PBC function.
• Some video CD with the PBC function resume
playback from the beginning of the track.
Rapid playback function is available only during
playback.
This function is available only on discs recorded in the
Dolby Digital format, and plays back in a slightly faster/
slower speed while keeping the sound output.
Fast Forward / Fast Reverse Playback
1)During playback, press [RAPID PLAY].
Press [RAPID PLAY] once during playback.
Plays back approximately at 0.8 times of normal
playback.
B
B1.3x:
B
1)During playback, press [D] or [E].
Every time you press [D] or [E], approximate speed
will be changed as follows.
Fast forward or fast reverse playback across titles (for
HDD/DVD) is not possible.
Press [RAPID PLAY] twice during playback.
Plays back approximately at 1.3 times of normal
playback.
normal
speed
Press [RAPID PLAY] 3rd time to play back in
normal speed.
No effects.
40x
20x
5x
2x
20x
40x
playback
For video CD, approximate forward/reverse speeds are
2x, 8x, 16x.
2)Press [PLAY B] to return to the normal playback.
For audio CD, approximate speed is fixed at 8x with
sound (indicated with
/
).
2)Press [PLAY B] to return to the normal playback.
• Audio (language) setting cannot be changed while
using this mode.
• This feature may not work at some point in a disc.
• Audio is PCM during rapid playback mode except
when using digital audio connection.
• When using digital audio connection (COAXIAL), the
LPCM sound (2 channel) will be output.
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Step by Step Playback
Chasing Playback during Recording
You can play back a title being recorded from the
beginning while recording continues.
F].
Playback will be paused and sound will be muted.
2)Press [G] repeatedly.
Playback will advance one frame (or step) at a time
when you press [G] with the sound muted.
1)During recording, press [PLAY B].
Playback of the title you are recording will start from
the beginning.
• Elapsed playback time will be displayed in the front
panel display.
To play back step by step backward:
Press [H] repeatedly.
Every time you press the button, the playback will go
backward by one frame.
• Press and hold [H] / [G] to reverse/advance
continuously.
2)Press [STOP C] once to stop the playback, .
The front panel display will switch back to show the
elapsed recording time.
If you press [STOP C] twice, it will stop the recording.
Note
3)Press [PLAY B] to return to the normal playback.
• You can also use the special playback functions such
as [E] [D] etc. during chasing playback mode.
[REC] is invalid during chasing playback.
• You can no longer fast forward the playback when it
comes to a few seconds before the current recording
point.
Note
• Only step by step forward playback is available for
playing back video CD.
Slow Forward / Slow Reverse Playback
Simultaneous Playback and Recording
1)During playback, press [PAUSE F]. Then press
With regard to HDD, you can continue recording a
program while playing back another title.
To do so, press [TITLE] during recording and select a title
you like to play back, and then press [PLAY B]
[ D] or [ E].
Every time you press [D] or [E], approximate speed
will be changed as follows. (The sound will remain
muted.)
(You can also start the playback from the title list menu.)
To playback a title being recorded while continuing to
record, refer to “Chasing Playback during Recording”
above (available only with HDD).
pause
1/4x
1/8x
1/16x
1/16x
1/8x
1/3x
2)Press [PLAY B] to return to the normal playback.
• Video CD, audio CD, JPEG files recorded on a disc can
also be played back during HDD recording.
• Forward/reverse speed will be indicated with icons
as follows.
forward (approx. speed)
1/16x:
1/8x:
1/3x:
reverse (approx. speed)
1/16x:
1/8x:
1/4x:
• Only slow forward is available when playing back
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Zoom
Marker Setting
This feature allows you to assign a specific point on a title
to be called back later.
1)During playback, press [DISPLAY].
2)Use [{/ B] to select
1)During playback, press [DISPLAY] to bring up the
display menu.
If the display menu is already shown, skip to step 2.
menu.
e.g.) DVD-video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
2)Use [{/ B] to select
to display the marker list.
e.g.) DVD-video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
3)Use [K/ L] to select a desired zoom factor to zoom,
then press [OK].
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
3)Use [K/ L] to select a desired marker number.
When it reaches the desired point, press [OK].
× 1.2
× 1.5
× 2.0
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
1
2
3
4
5
6
Zoom menu will appear.
There are four options
(x1.0, x1.2, x1.5 and x2.0), these are displayed
excluding the current zoom rate.
Zoom area will be displayed.
The title (track) number and the time will be displayed.
4)Use [K/ L/ {/ B] to select a desired zoom position,
then press [OK].
4)To return to the marker later:
Use [K/ L] to select the desired marker number
then press [OK].
• To clear a marker, select the marker number to be
cleared, then press [CLEAR]
• All markers will be erased when you operate these
operations listed below.
– opening the disc tray (DVD/CD only)
– turning the unit to the standby mode (DVD/ CD only)
– make additional recording on the disc (DVD only)
– editing any title (DVD only)
– dividing the title (HDD only)
– deleting a scene of the title (HDD only)
• You can mark up to 6 points.
Zoom playback will start.
• When selecting a smaller factor than the current one,
the zoom area will not be displayed.
• To exit the zoom menu, press [RETURN] repeatedly
at step 3.
• To cancel the zoom function, select “x1.0” using
[K/ L], then press [OK] at step 3.
• Marker setting is not available when you play back
the video CD with PBC function.
• When you zoom a picture during a slide show, the
slide show will be put in the pause mode. Press
[PLAY B] to resume the slide show and the zoom
function will be turned off.
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Repeat Playback
• Point B for the repeat A-B playback should be set
within the same title or track as point A.
• To cancel the repeat playback, select “OFF” at step 3.
The repeat setting will also be cancelled when you
stop playback.
Available repeat function may vary depending on discs.
1)During playback press [DISPLAY], then proceed to
step 2), or press [REPEAT] then proceed to step 3).
• If the display menu is already shown, skip to step 2.
• You cannot select “Group” during the random
playback.
2)Use [{/ B] to select
menu.
to display the selection
• Repeat playback is not available when you play back
the Video CD with PBC function.
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
K/ L] to select a desired repeat type, then
press [OK].
e.g.) HDD/DVD
Random Playback
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
You can play back a disc randomly instead of playing
back in the original order.
OFF
Title
Chapter
A – B
1)Press [MENU].
2)Use [K/L] to select “DISC Playback Mode”, then
press [OK].
e.g.) audio CD, video CD
“DISC Playback Mode” menu will appear.
1/
5
0:00:15 / 0:05:00
CD
For JPEG, use [K/L] to select “Photo”, then press [OK]
OFF
Track
All
3)Use [K/L] to select “Random Play”, then press [OK].
A – B
Random playback will start.
e.g.) JPEG files
Note
1/
5
0:00:05
JPEG
• To cancel random playback, press [STOP C] twice
during random playback. “OFF” appears on the TV
screen.
OFF
Track
All
Group
• For Video CD with PBC function, the PBC setting will
be switched to the standby mode automatically
when you start random playback.
The selected repeat playback will start.
1/
5
1/
5
0:01:00 / 1:23:45
+RW
Repeat
Title
Slide Show
Title (HDD/DVD only):
You can select the display time between 5 seconds and
10 seconds.
The current title will be played back repeatedly.
Chapter (HDD/DVD only):
The current chapter will be played back repeatedly.
All (DVD/Audio CD/Video CD without PBC function/
1)Follow steps 1 and 2 in “Random Playback” on page
77.
disc with JPEG):
All titles in the media will be played back repeatedly.
A-B (HDD/DVD/Audio CD/Video CD without PBC
2)Use [K/L] to select “Slide Show”, then press [OK].
3)Use [K/L] to select the display time, then press [OK].
4)Press [MENU] to exit.
function only):
Desired section can be played back repeatedly.
1) Use [K/ L] to select “A-B”, then press [OK]
2) Press [OK] at the desired starting point A.
3) Press [OK] at the desired ending point B.
Track (Audio CD/Video CD without PBC function/
JPEG files only):
The current track or file will be played back repeatedly.
Group (JPEG files only):
The current folder will be played back repeatedly.
• Large-size JPEG files take a few moments to be
displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Program Playback
Playing Back the Autostart Recording
By playing back the autostart recording, you can pause
or go back the TV program you are currently watching.
For the autostart recording refer to “AUTOSTART
RECORDING” on page 46.
You can program the disc to play back in your desired
order.
1)Press [MENU].
To pause and resume the TV program:
1)When watching TV program through this unit’s
tuner, press [PAUSE F].
2)Use [K/L] to select “DISC Playback Mode”, then
press [OK].
“DISC Playback Mode” menu will appear.
TV program will be paused and sound will be muted.
2)Press [PLAY B] to resume the TV program you were
watching from where you have paused.
3)Use [K/ L] to select “Program Play”, then press
[OK].
To rewind or fast forward the TV program:
4)Use [K/ L] to select a desired track, then press [OK]
When watching TV program through this unit’s
or [B].
tuner, press [H], [E], [REPLAY ], [G], [D] or
[SKIP
].
DISC Playback Mode
Program Play
• While playing back the autostart recording, pressing
[H] or [G] skips playback point 5 minutes
backward or forward.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
To go back to the specific time:
1)When watching a TV program through this unit’s
tuner, press [DISPLAY], then press [OK].
Total 0:00:00
2)Use [K/ L/ {/ B] or [the Number buttons] to enter
a desired time, then press [OK].
Repeat this step until you program all the desired
tracks.
• While playing back the autostart recording, press
[STOP C] to cancel the playback.
5)Press [PLAY B].
• When watching TV program or while playing back the
autostart recording, press [DISPLAY] once to display
the autostart recording information. Refer to
DISC Playback Mode
Program Play
09 04 10 06 --
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
“Autostart Recording Information” on page 23.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
• Noise reduction and zoom functions are available
while playing back the autostart recording.
Total 0:31:07
Note
Program playback will start.
• While playing back the autostart recording, you
cannot change the channels.
• While playing back the autostart recording, you
cannot change the DTV audio language.
• If you change to DVD mode or if the timer recording
starts while playing back the autostart recording, the
playback will be stopped.
• When this unit turns on for the timer recordings, the
autostart recording will not be performed.
• For the contents of the autostart recording, you
cannot change the TV audio.
• To erase tracks you selected, press [CLEAR] at step 4.
• You can program up to 50 tracks.
• To cancel program playback, press [STOP C] twice
during program playback. “OFF” appears on the TV
• Program information will be retained until you turn
the unit to the standby mode or open the disc tray.
• You may also select a desired track using
[the Number buttons] at step 4.
• For video CD with PBC function, the PBC setting will
be switched to the standby mode automatically
when you start program playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
SEARCH
Title / Chapter Search
Track Search
Using [H] / [G]
Using [H] / [G]
1)During playback, press [G] to skip the current
track/file and move to the next.
1)During playback, press [G] to skip the current title
or chapter and move to the next.
The track/file will move forward one at a time.
To go back to the beginning of the current track/file,
press [H]
The title or chapter will move forward one at a time.
• If there is no chapter in one title, the current title will
be skipped.
Press it repeatedly to go to the previous track/file. The
To go back to the beginning of the current title or
chapter, press [H].
Press it repeatedly to go to the previous title or chapter.
The title or chapter will move backward one at a time.
track/file will move backward one at a time.
For JPEG files, press it once to go to the previous file.
Using [DISPLAY]
1)During playback, press [DISPLAY] to bring up the
display menu.
If the display menu is already shown, skip to step 2.
• With regard to HDD, chapter search using
[H] /[G] is available only within the same title.
2)Use [{/ B] to select
e.g.) audio CD
Using [DISPLAY]
1/
5
0:00:15 / 0:05:00
1)During playback, press [DISPLAY].
CD
2)Use [{/ B] to select
e.g.) DVD-video
The number next to
will be highlighted.
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
3)Use [K/ L] or [the Number buttons] to enter a
desired track/file number to search, then press [OK].
After the search, playback will start automatically.
The number next to
3)Title:
will be highlighted.
Use [K/ L] or [the Number buttons] to enter a
desired title number to search, then press [OK].
Title search will start.
Chapter:
Note
Press [B] to move to the number next to
chapter.
Use [K/ L] or [the Number buttons] to enter a
desired chapter number to search, then press [OK].
for
• During CD playback you can enter a track number
directly using [the Number buttons] for track search
without displaying the menu.
• Track search using [DISPLAY] is not available when
you play back the video CD with PBC function.
After the search, playback will start automatically.
• In search mode display, total numbers of each search
contents (title/chapter/time) are shown as a
denominator.
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
total number
of titles
total number
of chapters
Download from Www.Somanuals.com. All Manuals Search And Download.
SEARCH
Time Search
1)During playback, press [DISPLAY] to bring up the
display menu.
If the display menu is already shown, skip to step 2.
2)Use [{/ B] to select
e.g.) DVD-video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
e.g.) audio CD
1/
5
0:00:15 / 0:05:00
CD
The number next to
will be highlighted.
To move to the number next to
, press [B].
When time search is not available,
counter are not displayed.
and time
3)Use [K/ L/ {/ B] or [the Number buttons] to enter
a desired time to search, then press [OK].
After the search, playback will start automatically.
• Time search is available only in the same track, file or
title.
• Time search is not available when you play back the
video CD with PBC function.
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING THE FORMAT OF AUDIO AND VIDEO
You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back.
Switching Subtitles
Switching Audio Soundtrack
DVD-video may have subtitles in 1 or more languages.
Available subtitle languages can be found on the disc
case. You can switch subtitle languages anytime during
playback.
When playing back a DVD-video recorded with 2 or more
soundtracks (these are often in different languages), you
can switch them during playback.
When playing back video CD, audio CD you can switch
“L/R”(stereo), “L”(left) or “R”(right).
1)During playback, press [DISPLAY].
1)During playback press [DISPLAY], then proceed to
step 2), or press [AUDIO] then proceed to step 3).
• If the display menu is already shown, skip to step 2.
2)Use [{/ B] to select
to display the selection
menu.
e.g.) DVD-video
2)Use [{/ B] to select
menu.
to display the selection
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
3)Use [K/ L] to select a desired audio soundtrack or
audio channel, then press [OK].
For DVD-video
• Audio soundtrack will switch.
3)Use [K/ L] to select a desired subtitle language,
then press [OK].
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
1.Dolby Digital 5.1ch English
2.Dolby Digital 2ch English
OFF
1.English
• If the title contains both main and sub audio, you can
further select “L” (main), “R” (sub), or “L/R” (mixed of
main and sub).
For audio CD, video CD
Audio channel will switch.
e.g.) audio CD
Subtitle will be displayed in the selected language.
When selecting “OFF”, subtitle will disappear.
• Some discs will only allow you to change the subtitle
from the disc menu. Press [TITLE] or [DISC MENU] to
display the disc menu.
1/
5
0:00:15 / 0:05:00
CD
1. L/R
2. L
3. R
• If a 4-digit language code appears in the subtitle
menu, refer to “LANGUAGE CODE” on page 121.
Note
• Some discs will only allow you to change the
soundtrack from the disc menu. Press [TITLE] or
[DISC MENU] to display the disc menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 81
SELECTING THE FORMAT OF AUDIO AND VIDEO
Switching Camera Angles
Reducing Block Noise
Some DVD-videos have scenes shot from 2 or more
angles. Angle information should be on the disc case if
the disc contains multi-angle scenes.
This function reduces noise in the playback picture.
1)During playback, press [DISPLAY].
1)During playback, press [DISPLAY].
2)Use [{/ B] to select
menu.
to display the selection
2)Use [{/ B] to select
, then press [OK].
e.g.) DVD-video
e.g.) DVD-video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
3)Use [K/ L] to select a desired option, then press
[OK].
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
OFF
Type 1
Type 2
Angle icon appears when a switching camera angle is
available.
Angle will switch each time you press [OK].
Your setting will be activated.
OFF
: When playing back titles with a very small
amount of noise such as DVD-video.
Type 1 : For the titles recorded in compressed video
Note
• Angle icon does not appear on the TV screen in case
you set “Angle Icon” to “OFF” in the “Playback” menu.
Refer to page 108.
Type 2 : Same as type 1, only more effective.
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON EDITING
Guide to a Title List
Title list allows you to check the titles recorded on the HDD or the disc easily. You can choose a title to play back from
this list and easily edit the titles as you prefer.
Press [HDD], then press [TITLE].
Press [DVD], then press [TITLE].
HDD mode
DVD mode
6
Title List
1
SP(2Hr)
JAN/ 9/12 12:00AM CH10 SP
12:00AM (1:00:00) MON JAN/ 9/12 CH10 SP
NOV/25/12 11:00AM CH12 SP
SUN NOV/25/12 0:20:44
1
2
3
6
2
Play
Edit
Overwrite
NOV/26/12 11:35AM CH13 EP
MON NOV/26/12 0:10:33
4
5
3
EMPTY SPACE
1:37:52 SP (2Hr)
1 / 6
3 4
1
11
e.g.) DVD
Edit
Title Delete
2
Edit Title Name
Chapter Mark
Hide Chapter
Index Picture
Title Dividing
NOV/26/12 11:35AM CH13 EP
1 : 05 : 00
16 15 14
13
12
1. Title name (editable): Recording date, time, channel
and the recording mode will be assigned
9. Recording mode: Currently selected recording mode
is displayed here.
automatically as the title name until you edit it.
10. Capacity indicator: Indicating the position and the
amount of each title in the disc. The portion for the
selected title is highlighted.
2. Title information: Time at which the recording of
the title was started, duration of the title, date
recorded, channel recorded, and the recording mode
in which the title was recorded.
3. Title List: List of titles recorded on the HDD. Each
title is indicated by its index picture. Following icons
may be displayed on the index picture.
• It may not indicate the precise capacity of the disc.
• If the duration of a title is too short, it may not be
reflected in the capacity indicator.
11. Index pictures: A cut from the recorded content is
displayed here.
Indicating the title has never been played back.
: Indicating the title is protected.
: Indicating the title is a copy-protected title.
12. Submenu: Submenus for the selected menu are
displayed here.
13. Title name (editable): If you do not name the title,
the recorded date, time, channel, and the recording
mode are displayed here.
I
: I f you call up the title list while recording, “I”
will be displayed on the index picture of the
title currently being recorded.
14. Progress bar: Indicating the progress of the
4. Arrow: Indicating there is a previous/next page.
playback.
5. Title list page number: Current page/total pages.
Preview of the selected title is
displayed here.
6. Title list: List of the titles recorded on the disc, and
their information.
16. Playback status: Indicating the current playback
status of the selected title.
7. Arrow: Indicating there is a previous/next page.
8. Title information: On the first line, title name
(editable) is displayed. On the second line, the date
recorded and length of the title are displayed.
EMPTY SPACE: The portion of the disc where there
are no recordings made. As for the EMPTY SPACE,
available recording time by the selected recording
mode is displayed on the second line.
Press [STOP C] to exit the title list.
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON EDITING
Edit Menu
HDD
DVD
Putting names on titles
Deleting a title
✔
✔
✔
✔
✔
✔
✔
Deleting selected titles
Deleting a scene of a title
Adding / deleting chapter marks
Hiding chapters
✔
✔
Protecting a title
✔
✔
✔ 1
✔
Dividing a title
Setting an index picture
Finalizing a disc
Note
✔
• Once you have finalized a DVD+R/ DVD-R, you
cannot edit or record anything on that disc.
✔ *2
✔
Making edits compatible
Putting name on disc
Setting or Releasing disc protect
• While recording a title to an HDD or a DVD, only
deleting HDD titles is available.
✔
✔
: Available
: Not available
*1 : -RW/+RW discs only
2 : +RW discs only
How to Access the Edit Menu
HDD
DVD
Press [HDD] first.
Press [DVD] first.
1)Press [TITLE].
1)Press [TITLE].
2)Use [K/ L/ {/ B] to select a desired title, then
press [OK].
2)Use [K/ L] to select a desired title, then press [OK].
SP(2Hr)
1
Title List
NOV/25/12 11:00AM CH12 SP
SUN NOV/25/12 0:20:44
JAN/ 9/12 12:00AM CH10 SP
12:00AM (1:00:00) MON JAN/ 9/12 CH10 SP
2
1
2
3
6
NOV/26/12 11:35AM CH13 EP
MON NOV/26/12 0:10:33
3
4
5
EMPTY SPACE
1:37:52 SP (2Hr)
1 / 6
3)Use [K/ L] to select “Edit”, then press [OK].
3)Use [K/ L] to select “Edit”, then press [OK].
SP(2Hr)
1
Play
Resume Playback
Play From Start
Edit
Edit
Overwrite
NOV/25/12 11:00AM CH12 SP
SUN NOV/25/12 0:20:44
2
NOV/26/12 11:35AM CH13 EP
MON NOV/26/12 0:10:33
Title Delete
Delete Multiple Titles
Dubbing
3
EMPTY SPACE
1:37:52 SP (2Hr)
Edit
Edit
Scene Delete
1
Edit Title Name
Chapter Mark
Title Dividing
Protect
Title Delete
1
Edit Title Name
Chapter Mark
Hide Chapter
Index Picture
Title Dividing
JAN/ 9/12 12:00AM CH10 SP
1 : 05 : 00
NOV/25/12 11:00AM CH12 SP
1 : 05 : 00
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
Deleting a Title
You can delete a title which you do not need anymore.
Please be advised that the title once deleted cannot be brought back.
Press [TITLE].
Use [K/ L/ {/ B] to select a desired
title to delete, then press [OK].
If you are editing the titles on HDD, proceed to step 4.
If you are editing the titles on DVD, proceed to step 3.
HDD mode
Title List
Title 1
12:00AM (1:00:00) MON JAN/ 9/12 CH10 SP
1
2
3
6
4
5
1 / 1
DVD mode
SP(2Hr)
1
NOV/25/12 11:00AM CH12 SP
SUN NOV/25/12 0:20:44
2
NOV/26/12 11:35AM CH13 EP
MON NOV/26/12 0:10:33
3
EMPTY SPACE
1:37:52 SP (2Hr)
Use [K/ L] to select “Edit”, then press
[OK].
SP(2Hr)
1
Play
Edit
Overwrite
NOV/25/12 11:00AM CH12 SP
SUN NOV/25/12 0:20:44
2
NOV/26/12 11:35AM CH13 EP
MON NOV/26/12 0:10:33
3
EMPTY SPACE
1:37:52 SP (2Hr)
• For DVD+RW/DVD-RW, the available disc space will
increase only when the last recorded title in the title
list is deleted. For DVD+R/DVD-R, the disc space will
• Deleted part of the titles in the capacity indicator
changes in color.
• As for DVD+RW/DVD-RW if you delete the title, deleted
title will be displayed as “EMPTY SPACE”.
• For DVD, it may take a while to write the data to the
disc after you press [OK] at step 5.
Instructions continue on the next page.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 85
EDITING
Use [K/ L] to select “Title Delete”,
then press [OK].
HDD mode
Use [K/ L] to select “Yes”, then press
[OK].
The title is now deleted.
Resume Playback
Play From Start
Edit
Title Delete
Delete Multiple Titles
Dubbing
Title List
Title 2
12:00AM (1:00:00) MON JAN/ 9/12 CH10 SP
1
2
3
4
5
DVD mode
Edit
1 / 1
Title Delete
1
Edit Title Name
Chapter Mark
Hide Chapter
Index Picture
Title Dividing
SP(2Hr)
1
EMPTY SPACE
0:21:14 SP (2Hr)
2
NOV/26/12 11:35AM CH13 EP
MON NOV/26/12 0:10:33
NOV/25/12 11:00AM CH12 SP
1 : 05 : 00
3
EMPTY SPACE
1:37:52 SP (2Hr)
Confirmation message will appear.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
Deleting Selected Titles
You can delete titles which you do not need anymore.
Please be advised that the titles once deleted cannot be brought back.
Use [K/ L/ {/ B] to select the title
you want to delete, then press [OK].
Title List
Title 1
12:00AM (1:00:00) MON JAN/ 9/12 CH10 SP
1
4
2
5
3
6
Press ‘CLEAR’ to confirm.
1 / 1
Trash mark will appear indicating the title is
marked for deletion.
Repeat step 4 until you select all the
titles you want to delete.
Title List
Title 2
12:00AM (1:00:00) MON JAN/ 9/12 CH10 SP
1
4
2
5
3
6
Press ‘CLEAR’ to confirm.
1 / 1
Press [HDD], then press [TITLE].
Press [CLEAR].
Confirmation message will appear.
Use [K/ L/ {B] to select any title,
then press [OK].
Use [K/ L] to select “Yes”, then press
[OK].
Titles are now deleted.
Title List
Title 1
Title List
12:00AM (1:00:00) MON JAN/ 9/12 CH10 SP
Title 1
1
4
2
5
3
6
12:00AM (1:00:00) MON JAN/ 9/12 CH10 SP
1
2
3
4
1 / 1
1 / 1
Use [K/ L] to select “Delete Multiple
To remove the trash mark from the title:
Titles”, then press [OK].
Select the title with the trash mark, then press
[OK]
Resume Playback
Play From Start
Edit
Title Delete
Delete Multiple Titles
Dubbing
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 87
EDITING
Putting Names on Titles
You can put title names on the titles and change the names from this menu.
Use [K/L] to select “Yes”, then press
[OK].
Edit - Edit Title Name
Yes
No
1
MY FAVORITE
1 : 05 : 00
The title name is now updated.
Press [RETURN] once or repeatedly to
go back to the title list.
For DVD, the data will be written onto the disc
momentarily.
This operation may take a
while to be completed.
G uide to Edit Title Name
1)Use [K/ L] to select a desired character set, then
press [OK].
2)Follow the list below, use [the Number buttons]
repeatedly until the desired letter appears.
When you finish entering a title name, press [OK].
Follow steps in “How to Access the
Edit Menu” on page 84 to display
Select
ABC
abc
123
@ ! ?
Press
Use [K/ L] to select “Edit Title
Name”, then press [OK].
e.g.) DVD
<space>
<space>
<space>
0
! ”# $ % & ’( )
+ , - . / : ; < = >
*
(*1)
(*1)
1
? @ [ ] ^ _ { | }
Edit
ABC
DEF
abc
def
2
3
4
5
6
7
8
9
Title Delete
1
Edit Title Name
Chapter Mark
Hide Chapter
Index Picture
Title Dividing
GHI
ghi
JKL
jkl
MNO
PQRS
TUV
WXYZ
mno
pqrs
tuv
NOV/25/12 11:00AM CH12 SP
1 : 05 : 00
wxyz
To enter a title name, follow the
steps of “Guide to Edit Title Name”
on page 88.
*1 Press
, character set will be changed to “ @!? ”
to to go back to
mode automatically. Press
the previous character set.
Edit - Edit Title Name
• To delete letters, press [CLEAR] repeatedly.
Holding [CLEAR] will delete all letters.
• Use [s/ B] to move the cursor to the left and right.
• You can enter up to 30 letters.
A
a
B
b
2
!
C
c
3
?
1
1
@
• Undefined letters in a title name are shown by “*”. If
you delete them, adjoining letters may change to “*”
or other character.
• Press the corresponding number key repeatedly to
choose the available letters.
M
1 : 05 : 00
area for entering title names
e.g.) Press [2]
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
Chapter Marks (Add)
You can put chapter marks in each title. Once a chapter is marked, you can use it for the chapter search feature.
To add a chapter mark:
Follow steps in “How to Access the
Edit Menu” on page 84 to display
Use [K/ L] to select “Chapter Mark”,
then press [OK].
Submenu will appear.
Play back the title up to the point
where you want to set a new chapter
When it comes to the desired point, press
[PAUSE F]
Use [KL] to select “Add”, then press
[OK].
e.g.) DVD
Edit - Chapter Mark
Add
1
Delete
Delete All
Chapter
2/
3
NOV/25/12 11:00AM CH12 SP
1 : 05 : 00
Use [KL] to select “Yes”, then press
[OK].
Edit - Chapter Mark - Add
Yes
1
No
Chapter
2/
3
F
NOV/25/12 11:00AM CH12 SP
1 : 05 : 00
Note for adding or deleting chapter marks
• Maximum number of chapter marks in a title is 99
(for HDD/DVD) and the maximum number of chapter
marks in total is no limit (for HDD)/254 (for DVD).
If the number of the chapter marks exceed the limit,
you cannot add any more chapter marks.
• Only with regard to DVD editing, you may not be
able to add chapter marks depending on the
duration of the title or the number of chapters.
• Only with regard to DVD editing, remaining time of
the disc may decrease when adding chapter marks or
increase when clearing chapter marks depending on
the recording time or edited contents.
• When you search for a point at step 3, you can also
use the special playback functions such as [G]
[D] etc.
A new chapter mark is now added.
To add more chapter marks, repeat steps 3 to 5.
Press [RETURN] once or repeatedly to
go back to the title list.
For DVD, the data will be written onto the disc
momentarily.
This operation may take a
while to be completed.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 89
EDITING
Chapter Marks (Delete)
To delete a chapter mark:
Follow steps in “How to Access the
Edit Menu” on page 84 to display
“Edit” menu.
Use [K/ L] to select “Chapter Mark”,
then press [OK].
Submenu will appear.
Use [H] / [G] to go to the chapter
with the chapter mark number you
want to delete, then press [PAUSE F].
Chapter mark number is displayed on the
preview screen.
e.g.) DVD
Edit - Chapter Mark
Add
1
Delete
Delete All
Chapter
2/
3
NOV/25/12 11:00AM CH12 SP
1 : 05 : 00
Use [K/ L] to select “Delete”, then
press [OK].
Use [K/L] to select “Yes”, then press
[OK].
Edit - Chapter Mark - Delete
Yes
1
No
Chapter
1/
2
F
NOV/25/12 11:00AM CH12 SP
1 : 05 : 00
The selected chapter mark is now deleted.
To delete more chapter marks, repeat steps 3 to
5.
Press [RETURN] once or repeatedly to
go back to the title list.
For DVD, the data will be written onto the disc
momentarily.
This operation may take a
while to be completed.
• You cannot delete the first chapter mark.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
Chapter Marks (Delete All)
To delete all chapter marks:
Follow steps in “How to Access the
Edit Menu” on page 84 to display
“Edit” menu.
Use [K/ L] to select “Chapter Mark”,
then press [OK].
Submenu will appear.
Use [K/ L] to select “Delete All”, then
press [OK].
Use [KL] to select “Yes”, then press
[OK].
Edit - Chapter Mark - Delete All
Yes
1
No
Chapter
2/
3
F
NOV/25/12 11:00AM CH12 SP
1 : 05 : 00
All chapter marks are now deleted.
Edit - Chapter Mark
Add
1
Delete
Delete All
Chapter
1/
1
NOV/25/12 11:00AM CH12 SP
1 : 05 : 00
Press [RETURN] once or repeatedly to
go back to the title list.
Data will be written onto the disc momentarily.
This operation may take a
while to be completed.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 91
EDITING
Dividing a Title
You can divide one title into 2 new titles.
Follow steps in “How to Access the
Edit Menu” on page 84 to display
Play back the title up to the point
where you want to divide the title.
When it comes to the desired point, press
[PAUSE F]
Use [K/ L] to select “Title Dividing”,
then press [OK].
Use [KL] to select “Yes”, then press
[OK].
The title is now divided into 2 new titles, and it
will go back to the title list automatically. Title
name’s of the divided titles are identical, and
index pictures are reset to the first scene at this
point.
• Once a title has been split up, it is not possible to
merge them back.
• If an internal HDD or a DVD contains the maximum
number of titles (HDD: 999, DVD+RW/-RW: 49), you
cannot divide any titles.
• With DVD+RW/-RW, you cannot divide the titles if the
total number of chapters has already reached 254.
• When you search for a point at step 2, you can also
use the special playback functions such as [G]
[D] etc.
• For DVD, it may start writing data to the disc as you
complete the editing procedure.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
Deleting a Scene of a Title
You can delete a specific part of a title.
Follow steps in “How to Access the
Edit Menu” on page 84 to display
Use [KL] to select “Scene Delete”,
then press [OK].
Edit
Scene Delete
1
Edit Title Name
Chapter Mark
Title Dividing
Protect
JAN/ 9/12 12:00AM CH10 LP
1 : 05 : 00
Play back the title up to the point
where you want to set a start point
for the scene to be deleted, then
press [OK].
To set a start point at the beginning of the title,
press [E], then press [OK]
Edit - Scene Delete
Start
1
End
Preview
Delete
JAN/ 9/12 12:00AM CH10 LP
1 : 20 : 00
Start point is now set, and the highlight
automatically moves to “End”.
Play back the title up to the point
where you want to set an end point,
then press [OK].
To set an end point at the end of the title, press
[D], then press [OK].
At the end of a title, playback will be in pause
mode. Press [PLAY B] to resume playback from
the beginning of the title.
Edit - Scene Delete
Start
1
End
Preview
Delete
JAN/ 9/12 12:00AM CH10 LP
1 : 30 : 00
End point is now set, and the highlight
automatically moves to “Preview”.
The portion for deletion is indicated in red in the
progress bar at the bottom of the screen.
• When you search for the start/end point at step 3/4,
you can also use the special playback functions such
as [G] [D] etc.
Instructions continue on the next page.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
With “Preview” highlighted, press
Use [K/ L] to select “Yes” then press
[OK].
[OK] to preview the result.
Every time [OK] is pressed, the deleted scene
will be shown including scene material 5
seconds before and after the deleted scene.
• If you are not satisfied with the result, use
[K/ L] to go back to “Start” or “End”, and try
setting them again.
• If you are satisfied with the result, proceed to
step 6.
Edit - Scene Delete
Yes
1
No
JAN/ 9/12 12:00AM CH10 LP
1 : 30 : 00
start point end point
The selected scene is now deleted.
Before
editing
Press [RETURN] once or repeatedly to
go back to the title list.
Edited
Use [KL] to select “Delete” then
press [OK].
Edit - Scene Delete
Start
1
End
Preview
Delete
JAN/ 9/12 12:00AM CH10 LP
1 : 30 : 00
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
Protecting a Title
To prevent the accidental editing, or erasing of the titles, you can protect them using the “Edit” menu.
Follow steps in “How to Access the
Edit Menu” on page 84 to display
Use [K/ L] to select “Protect”, then
press [OK].
Edit
Scene Delete
1
Edit Title Name
Chapter Mark
Title Dividing
Protect
JAN/ 6/12 12:00AM CH10 LP
1 : 30 : 00
With “OFF ON” selected, press
[OK].
Edit - Protect
OFF
ON
1
JAN/ 6/12 12:00AM CH10 LP
1 : 30 : 00
The title is now protected.
• If the title is already protected, “ON OFF” will
appear instead. Press [OK], to release the title
from protection.
• The protected title will be marked with
icon.
Press [RETURN] once or repeatedly to
go back to the title list.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 95
EDITING
Hiding Chapters
You can hide chapters from the title list. Hidden chapters are skipped during playback.
Follow steps in “How to Access the
Edit Menu” on page 84 to display
Use [K/ L] to select “Hide Chapter”,
then press [OK].
Submenu will appear.
Use [H] / [G] to go to the chapter
you want to hide, then press
[PAUSE F].
Use [K/ L] to select “Hidden”, then
press [OK].
Edit - Hide Chapter
Visible
1
Hidden
Chapter
2/
3
Visible
NOV/25/12 11:00AM CH12 SP
1 : 05 : 00
The chapter is now hidden.
Press [RETURN] once or repeatedly to
go back to the title list.
Data will be written onto the disc momentarily.
This operation may take a
while to be completed.
If you want hidden chapters to be “Visible”,
select the chapter to be shown. Then use
[K/ L] to select “Visible” at step 4 on page 96.
Data will be written onto the disc momentarily.
After the data is written, the title list is displayed.
Note
• ”Hidden” will be displayed in the preview window
while previewing the hidden chapter.
• When you make all chapters in the title “Hidden”,
“Hidden” is displayed on an index picture of the title
list.
SP(2Hr)
1
Hidden
NOV/25/12 11:00AM CH12 SP
SUN NOV/25/12 0:20:44
2
NOV/26/12 11:35AM CH13 EP
MON NOV/26/12 0:10:33
3
EMPTY SPACE
1:37:52 SP (2Hr)
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
Setting an Index Picture
You can set your desired scene as an index picture for each title.
Follow steps in “How to Access the
Edit Menu” on page 84 to display
Play back the title to find the scene
you want to use as an index picture.
When it comes to the desired point,
press [PAUSE F].
Use [KL] to select “Index Picture”,
then press [OK].
Use [K/ L] to select “Yes”, then press
[OK].
Edit - Index Picture
Yes
1
No
F
NOV/25/12 11:00AM CH12 SP
1 : 05 : 00
A new index picture is now set.
Press [RETURN] once or repeatedly to
go back to the title list.
Data will be written onto the disc momentarily.
This operation may take a
while to be completed.
Note
• If the selected picture for an index picture is
overwritten, the index picture is reset to the first
scene of the title.
• When you search for the point at step 2, you can also
use the special playback functions such as [G]
[D] etc.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 97
EDITING
Putting Name on Disc
You can put a name on the disc and change it from this menu.
Press [MENU].
Use [K/ L] to select “Disc Edit”, then
press [OK].
Use [K/ L] to select “Edit Disc Name”,
then press [OK].
e.g.) DVD+RW
Disc Edit
Edit Disc Name
Erase Disc
Make Edits Compatible
Disc Protect OFF
ON
A window for entering a title name will appear.
Edit Disc Name
A
a
B
b
2
!
C
c
3
?
No Disc Name
1
Disc
DVD+RW
3
@
Total Titles
Disc Space Used
Disc Protect
0:30:48
OFF
Make Edits Compatible
Needed
To enter a disc name, follow the steps
of “Guide to Edit Title Name” on page
When you finish entering a title name, press
[OK]
Use [K/ L] to select “Yes”, then press
[OK].
Data will be written onto the disc momentarily.
This operation may take a
while to be completed.
The disc name is now updated.
• You cannot select “Disc Edit” when finalized DVD+R
or DVD-R is inserted.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
Erasing Disc
You can erase all titles on a disc.
Press [MENU].
Use [K/ L] to select “Disc Edit”, then
press [OK].
Use [K/ L] to select “Erase Disc”,
then press [OK].
e.g.) DVD+RW
Disc Edit
Edit Disc Name
Erase Disc
Make Edits Compatible
Disc Protect OFF
ON
Use [KL] to select “Yes”, then press
[OK].
When you press “Yes”, all the
contents in the disc will be erased.
Are you sure to erase the disc?
Yes
No
momentarily.
This operation may take a
while to be completed.
• When you select “Yes” at step 4, all contents of the
disc will be erased.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
Making Edits Compatible
If you have added or deleted chapters, or made chapters hidden, you must perform “Make Edits Compatible” to see
those effects on another unit.
Press [MENU].
Use [K/ L] to select “Disc Edit”, then
press [OK].
Use [K/ L] to select “Make Edits
Compatible”, then press [OK].
Disc Edit
Edit Disc Name
Erase Disc
Make Edits Compatible
Disc Protect OFF
ON
Use [K/ L] to select “Yes”, then press
[OK].
Activate the Make Edits Compatible?
Yes
No
Data will be written onto the disc momentarily.
This operation may take a
while to be completed.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
Deleting All Titles in HDD
Press [MENU].
Use [KL] to select “HDD Menu”,
then press [OK].
Use [K/ L] to select the desired type
of deletion, then press [OK].
Select “Delete All Unprotected Titles” to delete
only unprotected titles.
Select “Delete All Titles” to delete all titles
including protected titles.
HDD Menu
Delete All Unprotected Titles
Delete All Titles
Use [KL] to select “Yes”, then press
[OK].
Delete entire titles?
Yes
No
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 101
LIST OF SETTINGS
The following table is the contents which you can set and the default setting. Refer to the following table for useful operation.
Menu
Items (highlight is the default)
Contents
Playback
pages 105-108
Parental Lock
Set the parental level for DVD playback.
OFF
level 8 [Adult] to 1 [Kid Safe]
Disc Audio
Dynamic Range
Control
Compressing the range of sound volume.
ON
OFF
PCM
Set whether the sound recorded in 96kHz will
be down sampled in 48kHz.
48kHz
96kHz
Dolby Digital
PCM
Stream
Set the type of sound signal which outputs
from the digital audio output jack.
Disc Menu Language
Set the language for disc menu language.
English
French
Spanish
Other
Audio Language
Set the language for audio.
Original
English
French
Spanish
Other
Subtitle Language
Set the language for subtitles.
OFF
English
French
Spanish
Other
Angle Icon
Still Mode
Set whether or not to display the angle icon.
ON
OFF
Set the type of still image when pausing
playback.
Auto
Field
Frame
Variable Skip/Replay
Variable Skip
5 seconds
Set the amount of skip time when you press
[SKIP
]
15 seconds
30 seconds
1 minute
5 minutes
Variable Replay
Set the amount of rewind time when you
press [REPLAY
5 seconds
]
15 seconds
30 seconds
1 minute
5 minutes
Display
pages 109-111
Language
Set the language for OSD (on-screen display).
English
Français
Español
Screen Saver
OFF
1 minute
5 minutes
Set the idling time before the screen saver
starts.
10 minutes
15 minutes
FL Dimmer
Auto
Bright
Dark
Set the brightness of the front panel display.
Set the type of the DTV closed caption.
DTV CC
Caption Service
page 38
OFF
Service1
Service2
Service3
Service4
Service5
Service6
Recording
ON
OFF
Set whether to record the DTV closed caption
or not.
page 43
CC Style
pages 39-40
User Setting
ON
OFF
Set the CC style setting whether or not it is
effective.
Font Size
Large
Middle
Small
Set font size of the displayed caption.
Instructions continue on the next page.
Download from Www.Somanuals.com. All Manuals Search And Download.
LIST OF SETTINGS
Menu
Display
pages 109-111
Items (highlight is the default)
CC Style Font Style
pages 39-40
Contents
Set font style of the displayed caption.
Style1
Style2
Style3
Style4
Style5
Style6
Style7
Style8
Font Opacity
Font Color
Set the font transparency (Opacity) of the
displayed caption.
Solid
Transparent
Translucent
Flash
Set the font color of the displayed caption.
White
Black
Red
Green
Blue
Yellow
Magenta
Cyan
Edge Type
Edge Color
Set edge type of the displayed caption.
Set edge color of the displayed caption.
None
Raised
Depressed
Uniform
L.Shadow
R.Shadow
White
Black
Red
Green
Blue
Yellow
Magenta
Cyan
Back Opacity
Back Color
Set background transparency (Opacity) of the
displayed captioning box.
Solid
Transparent
Translucent
Flash
White
Black
Set background color of the displayed caption
box.
Red
Green
Blue
Yellow
Magenta
Cyan
V-Chip
MPAA Rating
TV Rating
X
Set the viewing limitation according to US
movie ratings.
NC-17
R
PG-13
PG
G
NR
TV-MA
TV-14
TV-PG
TV-G
TV-Y7
TV-Y
None
Set the viewing limitation according to US TV
program ratings.
Canadian
English Rating
18+
14+
PG
G
Set the viewing limitation according to
Canadian English language ratings.
C8+
C
E
Canadian French 18ans+
Set the viewing limitation according to
Canadian French language ratings.
16ans+
13ans+
8ans+
G
Rating
E
Instructions continue on the next page.
Download from Www.Somanuals.com. All Manuals Search And Download.
LIST OF SETTINGS
Menu
Items (highlight is the default)
Contents
Display
pages 109-111
V-Chip
Downloadable Region Rating Table
To set the rating.
Clear the downloadable rating information
and its setting.
Rating
Clear Rating Table
Change
Password
Change the password.
Video
pages 112-113
Progressive Scan
TV Aspect
ON
To set the progressive scan mode (set to "ON")
or the interlace scan mode (set to "OFF").
OFF
Set a picture size according to aspect ratio of
your TV.
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
Video Input
page 56
L1(Rear)
Set the video input type for the external input
jack.
Video In
S-Video In
Video In
L2(Front)
S-Video In
Recording
Auto Chapter
page 43
OFF
5 minutes
10 minutes
Insert chapter marks at a preset time
interval’s.
15 minutes
30 minutes
60 minutes
Auto Finalize
page 66
Disc Full
ON
OFF
Set the unit to finalize the disc automatically.
End of Timer Rec ON
OFF
Make Recording Compatible
page 43
ON
OFF
Set to prohibit additional recording (OFF) or
to replace the title list after recording (ON).
Clock
pages 32-34
Clock Setting
Auto Clock Setting
Set the clock.
Set the clock automatically.
OFF
Auto
Manual
Daylight Saving Time
Auto Channel Preset
Manual Channel Preset
Set the clock for the daylight saving time.
Tune the channels automatically.
Tune the channels manually.
ON(MAR-NOV)
ON(APR-OCT)
OFF
Channel
pages 29-31
Antenna
Cable (Analog)
Cable (Analog/Digital)
TV Audio Select
page 37
Set the analog TV audio type for output and
recording.
Stereo
SAP
HDMI
pages 114-115
Format
Set the color space for the HDMI output.
RGB
YCbCr
HDMI Audio
Set to output the HDMI audio signal.
Set to “OFF” to not output the HDMI audio
signal.
ON
OFF
RGB Range
Set the black-white contrast level for HDMI
RGB output.
Normal
Enhanced
fun-Link (HDMI CEC)
ON
OFF
Set to utilize fun-Link (HDMI CEC).
• Your change to each setting stays on even when the power is off.
• An item which is not currently available is grayed in the on-screen settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Playback
Press [MENU] and use [KL] to select
“General Setting”, then press [OK].
“General Setting” menu will appear.
Use [KL] to select “Playback”, then
press [OK].
General Setting
Playback
Display
Video
Recording
Clock
Channel
HDMI
Use [K/ L] to select a desired item,
then press [OK].
Parental Lock
1
2
3
4
5
6
7
8
Disc Audio
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still Mode
Variable Skip / Replay
Refer to
to
on pages 106-108
When you finish with the setting,
press [MENU] to exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 105
SETUPS
Some DVD-videos feature a parental lock level. Playback
will stop if the ratings exceed the levels you set, it will
require you to enter a password before the disc will
playback. This feature prevents your children from
viewing inappropriate material.
Use [K/ L] to select “Yes”. Use [the Number buttons]
to enter a new password except for 4737, then press
[OK].
Change Password?
Password Input
Yes
No
Use [K/ L] to select the desired level, then press [OK].
Yes
Parental Lock
Your setting will be activated.
OFF
8 [Adult]
7 [NC 17]
6 [R]
5 [PG R]
4 [PG 13]
3 [PG]
• Use [the Number buttons] to enter the current
password.
Password Input
2 [G]
1 [Kid Safe]
If a password has not been set yet, proceed to
If a password has been set already, proceed to
Your setting will be activated.
• If you want to change password, use [K/ L] to select
“Yes”. Use [the Number buttons] to enter a new
password except for 4737, then press [OK].
• Parental lock function may not be available to some
discs.
<change the password>
• With some DVDs, it may be difficult to find if they are
compatible with parental lock. Be sure to check if the
parental lock function operates in the way that you
have set.
Change Password?
Password Input
Yes
No
Yes
Your setting will be activated.
• Record the password just in case you forget it.
• If there is a DVD in the unit when you set up the
parental lock, press [OPEN/CLOSE A] to activate the
parental lock level.
Note
• Press [CLEAR] to erase numbers entered incorrectly.
• When you forget the password or you want to clear
all settings in the “Parental Lock” menu, enter 4737
using [the Number buttons] in the password input
window. Password will be cleared and parental levels
will be set to “OFF”.
Instructions continue on the next page.
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Choose the appropriate audio setting for your external
device.
Use [K/ L] to select a setting, then press [OK].
Dolby Digital
It will only affect disc playback.
PCM
Stream
Use [
K
/
L
] to select desired item, then press [OK]
Your setting will be activated.
Disc Audio
A
PCM
: Converts the Dolby Digital into PCM (2 channel).
When your amplifier/decoder is NOT
Dynamic Range Control
PCM
Dolby Digital
B
compatible with Dolby Digital, set to “PCM”.
C
Stream : Outputs Dolby Digital signals
When your amplifier/decoder is compatible
with Dolby Digital, set to “Stream”.
Set to “ON” to compress the range between soft and loud
sounds.
Use [K/ L] to select a setting, then press [OK].
• With regard to DVD playback, if the audio source is in
Dolby Digital format, set “Dolby Digital” to “PCM” so that
you can switch to main audio (L), sub audio (R), or a
combination of both (L/R) using your
Dynamic Range Control
amplifier/decoder.
ON
OFF
Set the disc menu language.
Note
Use [K/ L] to select a setting, then press [OK].
• Dynamic range control function is available only with
the titles which are recorded in the Dolby Digital
format.
Disc Menu Language
English
French
Spanish
Other
Your setting will be activated.
Use [K/ L] to select a setting, then press [OK].
PCM
48kHz
96kHz
Set the audio language.
Use [K/ L] to select a setting, then press [OK].
Audio Language
48kHz : If your amplifier/decoder is NOT compatible
with 96kHz PCM, select “48kHz”. 96kHz sound
will be output in 48kHz.
96kHz : If your amplifier/decoder is compatible with
96kHz PCM, select “96kHz”. 96kHz sound will
be output.
Original
English
French
Spanish
Other
Your setting will be activated.
• When “Original” is selected, the audio language will be
in the disc’s default language.
When playing back a disc with copyright protection
• Even if you select “96kHz”, the sound will be down
sampled at 48kHz.
Instructions continue on the next page.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 107
SETUPS
Set the subtitle language.
Select “Auto” usually.
Use [K/ L] to select a setting, then press [OK].
Use [K/ L] to select a setting, then press [OK].
Still Mode
Subtitle Language
Auto
OFF
Field
Frame
English
French
Spanish
Other
Your setting will be activated.
Auto
: Optimum resolution setting (“Field” or
“Frame”) will be selected.
Your setting will be activated.
Field
: Images in the still mode will be stabilized.
Frame : Images in the still mode will be highly defined.
Note
Code Input
Frame is 1 completed video image made up of 2
fields (There are 30 frames per second of NTSC video).
-
-
-
-
to the language code table on page 121.
Assign [SKIP
] or [REPLAY ] to skip or rewind by a
certain amount of time when they are pressed.
• Only the languages supported by the disc can be
selected.
Use [K/ L] to select a desired item, then press [OK].
• Audio language setting may not be available to
some discs.
• You can change or switch off the subtitles on a DVD
also from the disc menu if it is available.
Variable Skip
Variable Replay
A
B
Refer to the explanations below and set the selected item.
• Press [CLEAR] or [s] to erase numbers entered
incorrectly.
Sets the amount of skip time for [SKIP
]
Variable Skip
5 seconds
15 seconds
30 seconds
1 minute
Set to “ON” to show the angle icon during the playback.
Use [K/ L] to select a setting, then press [OK].
5 minutes
Angle Icon
ON
OFF
Sets the amount of rewind time for [REPLAY
]
Variable Replay
5 seconds
15 seconds
30 seconds
1 minute
5 minutes
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Display
Press [MENU] and use [K/ L] to select
“General Setting”, then press [OK].
Use [K/ L] to select “Display”, then
press [OK].
Use [KL] to select a desired item,
then press [OK].
Language
Screen Saver
FL Dimmer
DTV CC
CC Style
V-Chip
1
2
3
4
5
6
Selection menu will appear.
Refer to to on pages 109-111 and
set the selected item.
• For
and
refer to pages 38-40.
When you finish with the setting,
press [MENU] to exit.
Set the language for the on-screen display.
Use [K/ L] to select a setting, then press [OK].
Language
English
Français
Español
Set the time to activate the screen saver function on the
Use [K/ L] to select a setting, then press [OK].
Screen Saver
OFF
1 minute
5 minutes
10 minutes
15 minutes
Your setting will be activated.
Instructions continue on the next page.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 109
SETUPS
Set the front panel display brightness.
Use [K/ L] to select a setting, then press [OK].
FL Dimmer
Auto
Bright
Dark
You can set the viewing limitation according to MPAA
rating (US movie ratings), TV Rating (US TV program
ratings), Canadian English Rating (Canadian English
language Ratings), Canadian French Rating (Canadian
French language Ratings).
If “Auto” is selected, the display gets dark when the
power is in the standby mode.
V-Chip
1) Use [K/ L] to select the desired rating, then press
[OK] repeatedly to switch between view and block.
When it is blocked a key icon will appear.
With the V-chip system in this unit, you can set the
viewing limitation for the analog/digital TV programs
received from the tuner or recorded on DVDs to prevent
your children from watching inappropriate programs. If
the unit detects a blocked program, a restriction message
appears and you are not allowed to view the program.
1) Use [the Number buttons] to enter the access
password.
If you have not set the password, first, use
[the Number buttons] to set the access password,
then press [OK]. The number you entered will be stored
as the access password.
e.g.) MPAA rating
MPAA Rating
X
NC-17
R
PG-13
PG
G
NR
[MPAA Rating]
Rating
Category
Mature audience only
Password Input
X
higher
NC-17
No one under 17 admitted
Restricted; under 17 requires
accompanying parent or adult guardian
2) Use [K/ L] to select a desired item, then press [OK].
R
V-Chip
PG-13
PG
Unsuitable for children under 13
Parental guidance suggested
General audience
A
MPAA Rating
TV Rating
Canadian English Rating
Canadian French Rating
Downloadable Rating
Change Password
B
C
D
E
G
lower
NR
No rating
F
[TV Rating]
Rating
TV-MA
TV-14
TV-PG
TV-G
Category
Mature audience only
higher
Unsuitable for children under 14
Parental guidance suggested
General audience
TV-Y7
TV-Y
Appropriate for all children 7 and older
Appropriate for all children
No rating
lower
None
[Canadian English Rating]
Rating
Category
18+
14+
PG
G
Adult audience only
higher
Unsuitable for ages under 14
Parental guidance suggested
General audience
C8+
C
For children over 8
For all children
lower
E
Exempt program
Instructions continue on the next page.
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
[Canadian French Rating]
Rating
Category
Set the rating system via digital broadcasting, or clear the
downloaded ratings.
If the broadcasting signal does not have the
downloadable rating information, the message below
will appear.
18ans+
16ans+
13ans+
8ans+
G
Adult audience only
higher
Unsuitable for ages under 16
Unsuitable for ages under 13
Unsuitable for ages under 8
General audience
lower
Downloadable Rating is currently not available.
E
Exempt program
This message will also appear when you try to access
“Downloadable Rating” after you have cleared the
downloadable rating information, and the new information has
not been downloaded since.
As for TV Rating’s TV-MA, TV-14, TV-PG, or TV-Y7, you
can further set the sub ratings to block specific
elements of programming. Press [K/L/ {/B] to select
the desired rating or sub rating, then press [OK]
repeatedly to switch between view and block. Sub
rating status will appear on the side of the main rating.
To set the rating:
1) Use [K/ L] to select a desired rating to set, then
press [OK] to show the levels for the rating.
TV Rating
2) Use [K/ L] to select a level, then press [OK] to
switch between view or block.
FV
V
S
L
D
TV-MA
TV-14
TV-PG
TV-G
If you set one level to block, a key icon will appear and
all the higher levels will be blocked automatically.
To clear the downloadable rating information and its
setting:
TV-Y7
TV-Y
1) Use [K/ L] to select “Clear Rating Table”, then
press [OK]
None
2) Use [{/B] to select “Yes”,then press [OK].
Sub Rating
Category
Fantasy Violence
Rating
TV-Y7
FV
V
Violence
TV-PG
TV-14
TV-MA
Change the current password.
S
Sexual Situation
Coarse Language
Suggestive Dialogue
Use [the Number Buttons] to enter new access
password.
L
D
TV-PG, TV-14
Note
When you forget the access password at step 1) on
page 110, enter 4737 using [the Number buttons] in
the password input window. Password will be cleared.
• Changing the main rating to block or view
automatically changes all its sub ratings to the same
(block or view).
• Depending on the type of rating system, you may set
the levels individually.
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Video
Press [MENU] and use [KL] to select
“General Setting”, then press [OK].
Use [KL] to select “Video”, then
press [OK].
Use [K/ L] to select a desired item,
then press [OK].
1
2
3
Progressive Scan
TV Aspect
Video Input
Submenu will appear.
Refer to
the selected item.
to
on page 113 and set
• For
refer to page 56.
When you finish with setting, press
[MENU] to exit.
Instructions continue on the next page.
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Use this feature to adjust the aspect ratio of the video
source which is different from your TV’s ratio to fit your TV
monitor without distorting the picture.
This unit is compatible with the progressive scan system.
The feature provides you with higher definition images
than the traditional output system does. To utilize this
feature, you must set progressive scan mode to “ON”.
Use [K/ L] to select a setting, then press [OK].
1) Use [K/ L] to select “ON“, then press [OK].
TV Aspect
Progressive Scan
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
ON
OFF
Aspect ratio of the video source
{/ B] to select “Yes“, then press [OK].
4:3
16:9
Activating progressive scan:
Check your TV has progressive scan
and connect with component video cable.
Setting of TV Aspect
NOTE :
If there is no picture or picture is
distorted after selecting “Yes”,
Wait about 15 seconds for auto recovery.
Activate?
Yes
No
4:3 Pan & Scan
3) Use [K/ L] to select “Yes“ within 15 seconds, then
press [OK].
Your setting will be activated.
16:9 Wide
• If your TV is compatible with progressive scan (480p),
you are recommended to use the HDMI or
If you have a standard TV:
Select “4:3 Letter Box”, so that black bars appear on the
top and bottom of the TV screen when playing back a
wide-screen picture. Select “4:3 Pan & Scan” for a full
height picture with both sides trimmed when playing
back wide-screen picture.
If you have a widescreen TV:
Select “16:9 Wide”.
component video cable (commercially available) to
connectthisunittotheTV. (Refertopages17-18.)Ifnot,
use the RCA video cable and set the progressive scan
to “OFF” or press and hold [MENU] for more than 3
seconds during HDD/DVD playback.
• When selecting “No” or not pressing any buttons on the
unit or remote control within 15 seconds at step 3),
progressive scan remains to be “OFF” (interlace scan).
• Please contact TV manufacturer if you have any
problem with it.
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
HDMI
Press [MENU] in stop mode and use
[KL] to select “General Setting”,
then press [OK].
Use [K/ L] to select “HDMI”, then
press [OK].
Playback
Display
Video
Recording
Clock
Channel
HDMI
Use [K/ L] to select a desired item,
then press [OK].
Format
HDMI Audio
RGB Range
fun-Link (HDMI CEC)
1
2
3
4
When you finish with the setting,
press [MENU] to exit.
You can select the color space for HDMI output.
Set the appropriate color space for your display device.
Use [K/ L] to select a setting, then press [OK].
• When the connected device is not compatible with the Y/
Cb/Cr, HDMI signal is output as RGB regardless of the setting.
Format
RGB
YCbCr
If you do not want to output the audio through HDMI
(Such as when you digitally output the audio through the
COAXIAL DIGITAL AUDIO OUTPUT jack to your audio
system, etc.), you can set the HDMI audio output off.
Use [K/ L] to select a setting, then press [OK].
• Set to “OFF” when the HDMI sound is not output.
HDMI Audio
ON
OFF
Your setting will be activated.
Instructions continue on the next page.
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
You can adjust the RGB range to make the dark areas of
the HDMI images brighter.
Use [K/ L] to select a setting, then press [OK].
• Select “Enhanced“ if the black-white contrast is not clear.
• This setting is effective only for HDMI RGB output.
RGB Range
Normal
Enhanced
Your setting will be activated.
fun-Link (HDMI CEC)
ON
OFF
over HDMI and is part of the HDMI standard.
When “fun-Link (HDMI CEC)” setting is set to “ON”,
functions listed below will be available.
One Touch Play
When this unit is turned on, the TV also is turned on and
the appropriate external input channel will be selected
automatically. The appropriate external input channel
can also be selected on your TV automatically, when you
press [PLAY B], [G], [H], [DISC MENU],
[TIMER PROG.], [DTV/TV], [MENU], [CHANNEL
/
],
[the Number buttons] or [DUBBING] when the unit’s
power is on.
Standby
When you press and hold [STANDBY/ON y] for 2
seconds, it turns off the power to the standby mode of
the TV first and then turns the power off on this unit
also.
System Information
Get & Set Menu Language
This unit recognizes the language set for the TV and
automatically sets the same language on the player
menu language for this unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing.
Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.
Symptom
Remedy
The power does not turn on.
• Check that the AC power cord is connected securely.
• Remote Control batteries may be weak, replace them with new ones.
Leave the unit unplugged for 20-30 min, plug the unit back in. If the unit
does not power on please contact our customer service center for service
on the model.
The unit turns on automatically
without any operation.
• The unit turns on automatically 2 seconds before the timer recording.
”Language” menu appears every time • The unit may not have been turned off correctly. Finish up the language setting
the power turns on.
procedure by selecting a language in Languagemenu. Press [OK] to activate the
setting, then press [STANDBY/ON y] to turn the unit to the standby mode.
Do not disconnect the AC power cord before placing the unit in the standby mode.
The unit does not response.
• “ ” or error message appears if the operation is prohibited.
• Remote Control batteries may be weak, replace them with new ones.
Leave the unit unplugged for 20-30 min, plug the unit back in. If the unit
does not power on please contact our customer service center for service
on the model.
No picture, sound or menu appears on • Depending on the Source/Connection, confirm the following:
the screen.
-For Antenna/Basic Cable, redo an Auto Scan on the model.
-For Satellite Receiver/Cable Box, check the connections to make sure
they are securely connected.
-For RF Coaxial Cable, redo an Auto Scan on the model.
-For RCA Audio/Video, check the connections to make sure they are
securely connected.
• Check if the connections are made securely and correctly.
• Check if the cables are damaged.
Check if a correct external input channel is selected on your TV. (Refer to page 22.)
• Check if you have completed the channel setting. (Refer to pages 29-31.)
• While the setup menu or timer programming display is shown, or while the
screen saver is active, the audio is muted.
Clock setting and channel setting
cannot be performed.
• If a recording is in progress, these operations cannot be performed.
Time jumps/Auto Clock set’s incorrect • Set the “Auto Clock Setting” to “OFF” on page 104 and try “Manual Clock
time.
Setting” on page 34.
The unit does not operate properly.
Moisture has condensed inside the unit. Remove the disc and leave the unit
turned on for about 2 hours until the moisture evaporates. (Refer to page 3.)
“Repairing” appears on the TV screen.
• If there is a power failure or unplugging during recording, finalizing,
formatting or editing (even after “Repairing” disappears), a repairing
process will begin automatically just after turning the unit on again.
It may take several minutes up to several hours.
Repairing
In case you intend to cancel the
repairing process.
• If you intend to cancel the repairing process, press [AOPEN/CLOSE]
on the front panel, then select “Yes” and press [OK]. After that, press
[OPEN/CLOSE A] to take out the disc. The disc cancelled during the
repairing process MAY NOT work.
Do you want to cancel a repairing
process? When selecting “Yes”,
the disc may not be usable.
Yes
No
Repairing
The clock display does not appear in
the front panel display.
• Check that the AC power cord is connected securely.
• (In case of power failure) Check the breaker and clock setting.
When you forget the password for
parental lock.
• Please cancel the password and the set level. (Refer to page 106.)
No analog TV closed captions are
output.
• If you are using HDMI connection to watch the TV programs through
this unit, analog TV closed caption cannot be output. Try using another
output connection to the TV.
Instructions continue on the next page.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Symptom
Remedy
DV signal cannot be input.
• Before connection, turn on the power supplies for both this unit and the
DVC, and make sure that these units have stopped.
• Only a “DVC-SD” signal can be input from the DVC to this unit. Other
types of signals are not supported.
• Do not connect any device other than the DVC. Even if a recorder or PC
with another DV terminal is connected, the DV function will not operate.
• If the DVC is not recognized after connection, turn off the power supply
The DVC cannot be operated with this • Signal input or DVC operation from this unit may be disabled
unit.
depending on the type of DVC.
• If a DVC signal cannot be input, use an external input (L1/L2) for analog
connection via audio/video cables.
• DVC control may be disabled depending on the type of DVC, even in a
mode other than camera mode. In this case, switch to HDD/DVD control
and execute the normal recording procedure while operating the DVC.
Certain functions of the DVC cannot
operate.
• Some functions may not operate depending on the type of DVC. For
example, if the DVC does not support slow playback mode, the slow
playback function is disabled.
• With L3(DV-IN), the disc display menu does not appear unless disc
playback is executed.
DV audio signal cannot be switched.
No image from HDMI connection.
• For recording with the DVC, the recording audio signal can be set to 12
bits or 16 bits. However, when 16-bit recording mode is selected, audio
signal cannot be switched. To record an audio signal, set it to 12 bits.
• Check the HDMI connection. (Check the status of the HDMI related
indications.)
• Check whether the connected monitor device or other device supports
HDCP. (This unit will not output a video signal unless the other device
supports HDCP.)
• Check the setting of HDMI.
• Check whether the output format of this unit (HDMI FORMAT) matches
the supported input format of other connected device.
• If above remedies do not work, unplug the HDMI cable and the AC
power cords, then plug them back in the order of 1: HDMI cable, 2: AC
power cord.
Setup menu cannot be called up.
TV channels cannot be changed.
• Setup menus cannot be called up during DVD recording.
• Press [STOP C] on the remote control, and then press [MENU]
• Check if the connections are made securely and correctly.
• Check if the cables are damaged.
• Try channel setting by following the steps on pages 29-31
Only specific channels do not appear. • The channels may be set to be skipped. (Refer to pages 30-31.)
The external input channels (such as
L1, L2 or L3) cannot be skipped.
• This unit does not skip the external input channels. This is not a
malfunction.
The unit is not picking up my channels • Check the Connections. Confirm the main source from the Antenna/
from the Auto Scan.
Basic Cable/Cable Box/Satellite Receiver is connected to the ANTENNA
IN by an “RF Coaxial” Cable. If not using the “RF Coaxial” cable and using
an S-Video or RCA Audio/Video cable, the unit will need to be set on L1
or L2.
The image from the external device • Try pressing [SOURCE] repeatedly.
cannot be displayed or recorded.
• Turn on all connected devices.
• Check if the connections are made securely and correctly.
Instructions continue on the next page.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Symptom
Unable to Record.
Remedy
• It is prohibited to make a recording from 2 minutes before the
programmed start time of a timer recording.
• This unit cannot record programs that contain copy protection signal.
This is not a malfunction.
• The space of the recording media may be used up. Try deleting
unnecessary titles, or exchange it with the recordable media.
• The maximum number of titles or chapters has exceeded. Delete the
unnecessary titles to make enough space or insert a new recordable media.
• Check if the connections are made securely and correctly.
Timer recording cannot be
performed.
• The internal clock of the unit may have been stopped due to a power
outage. Reset the Clock Setting (Refer to pages 32-34.)
•
If using a Cable Box or Satellite receiver it may have been turned off at
the time of the recording. Please check, if there are any Timing options
for the Cable Box or Satellite receiver to turn On, if none please make sure
the receiver is turned On and set to the channel you wish to record.
Check the Timer Recording menu for any Recording errors, if there is an
error look at the Recording Error Code Listing (refer to page 50).
•
The picture of the autostart
recording disappears.
• The contents of the autostart recording will be cleared in some cases
(Changing input channel etc.). Refer to page 46.
When playing back the title
recorded from the autostart
recording, the DTV program
information is displayed and it
cannot be removed.
• In the autostart recording, when you display the DTV program
information, the information will be recorded as the part of the picture.
Unable to Record.
• Check to see if the disc is format to this unit. If used in a PC or any other
device, it may not allow any recordings.
• For DVD+RW/DVD-RW, try “Erase Disc” for reformatting (Refer to page 99).
• Copy-once programs cannot be recorded on DVD. This is not a
malfunction.
• Check if the disc is protected or finalized. Undo the protection or the
finalization. (Refer to page 64 and 65.)
• DVD-RW once formatted on another unit cannot be recorded on this
unit unless all the contents in the disc are erased.
• Check if the connections are made securely and correctly.
Writing to Disc
100%
The indication
• “
may remain on screen for the maximum
Writing to Disc
100%
“
of 20 seconds even after it reached 100%. This is not a malfunction.
does not disappear.
TV aspect ratio does not match
your TV screen.
• Check the TV aspect ratio. (Refer to page 113.)
• A different aspect ratio will be used when the aspect ratio specified by
the disc is not supported by this unit.
Playback picture is distorted.
Color of the picture is abnormal.
• During fast forward or fast reverse, playback picture may be distorted.
This is not a malfunction.
• Connect to TV directly. When you connect this unit with the television
via VCR or other devices, the picture may be distorted due to the copy-
protection signal.
• Check if the cables are damaged.
• Keep the equipment which may cause electrical disturbances, such as a
cellular phone, away from the unit.
• Check if the external input channel is set correctly.
• Check if the connections are made securely and correctly.
• If using the HDMI connection, sound is not output when “HDMI Audio”
• Check the RCA audio cable connection. If you are using HDMI-DVI
conversion cable, you must connect the RCA audio cable, too.
• If using the HDMI connection, check whether the output format of this
unit (HDMI FORMAT) matches the supported input format of the other
Instructions continue on the next page.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Symptom
Playback does not start from the
beginning.
Remedy
• Resume function may be activated. Refer to page 74 to cancel the resume
point.
HDD playback suddenly stops.
Playback cannot be performed.
• When DVD recording finishes during HDD playback, the unit will stop the
HDD playback and start writing data to the DVD. This is not a malfunction.
• Check if the playable disc is inserted.
• Check if the disc is loaded correctly with the labeled side facing up.
• Discs made on other devices or on personal computers cannot be
played back on this unit unless it is finalized on the device.
Even if it is finalized, the performance of those discs are not guaranteed
on this unit.
• The disc may be dirty or flawed. Clean the disc.
• Check if all the connections are made correctly.
• Check the parental lock setting. (Refer to page 106.)
• Playback of DVD is prohibited from 2 minutes before the programmed
start time of a timer recording when the recording media is DVD.
There is no sound or no subtitle.
• Check if “Disc Audio” is set correctly. (Refer to page 107.)
• There is a possibility that the selected subtitle language is not
supported by the disc.
Digital audio setting cannot be
changed to main audio (L), sub
audio (R) or combination of both.
• If the audio source is in the Dolby Digital format, set the Dolby Digital
Setting to “PCM” in “Playback” menu. (available only for DVD) (Refer to
page 107.)
Audio language or the subtitle
language of the DVD cannot be
changed.
• Multilingual subtitles are not supported by the disc.
• Some audio languages or the subtitle languages can be changed only
from the disc menu. Please refer to the disc’s manual.
Camera angles cannot be changed. • Even though the multi-angle feature is supported by the disc, that does
not mean all the scenes are shot from multi-angles. Changing angles are
available only for those scenes shot from the multi-angle.
The disc cannot be played back on • Some DVD players do not play back the disc made on another recorder.
another player even though it is
finalized properly.
Refer to the manual of the unit.
Dubbing cannot be executed.
• When the number of the titles or the chapters exceeds the maximum
recordable number, the dubbing will not be executed.
• Dubbing of a “copy-once only” program is not possible with this
unit. ”This program is not allowed to be recorded.” appears when the
program is copyrighted for one-time recording only.
Dubbing cannot be executed.
• Check if the disc is compatible for recording (refer to page 41).
Titles cannot be edited or deleted. • The titles or the disc itself may be protected. Cancel the protection by
following the steps on page 95 for title protection and page 64 for disc
protection.
Titles cannot be edited or deleted. • Check to see if the disc may have been finalized. The titles in the
DVD+R/-R cannot be edited or deleted if they are finalized. If using a
DVD-RW disc, try the “Undo Finalize” option. (Refer to page 65.)
The capacity of the disc doesn’t
increase even if the recorded
program is deleted.
• With DVD+RW/-RW, the disc space will increase only when the last title
is deleted. With DVD-R/+R, deleting a title will not increase the disc
space.
• No batteries in the remote or the batteries may be weak. Replace the batteries.
• Try getting closer to the unit. (Refer to page 12.)
The remote control does not function.
• Please check IR signal. (Refer to page 4.)
• Cannot guarantee about 3rd party’s remote controls. Please contact the
remote manufacturer if you have any problem with it.
• If above solutions do not solve the problem, please call our customer support
at 1-800-605-8610 or visit www.magnavox.com/support for additional
assistant.
Instructions continue on the next page.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Error Message
Error message
Cause
Solution
Disc Error
• Unplayable disc is inserted in the unit.
• The disc is upside down.
• Insert a standardized playable disc
which bear the Logos on page 67.
• Insert the disc with the labeled side
facing up.
— Please eject the disc. —
Playback feature may not be available on
this Disc.
Region Error
— Please eject the disc. —
Playback is not authorized in your region.
• Playback is not authorized in the region
of the DVD-video which you inserted in
the unit.
• Insert the DVD-video with region codes
1 or ALL.
Parental Lock On
The current selected parental level
prohibits playback.
• The current selected parental level
prohibits playback.
• Check “Parental Lock” setting in
“Playback” menu (page 106).
Recording Error
This program is not allowed to be
recorded.
• The recording function encountered a
copy protection program.
Copy-righted programs cannot be
recorded on this unit at any time. The
unit will stop recording at any point and
will display the message. Please contact
your programming provider for type of
copy protection applied to program.
Recording Error
This program is not recordable in +VR
mode.
• You are trying to record the copy-once
program.
• You cannot record the copy-once
program.
Recording Error
Cannot record on this disc.
• You are trying to record onto the disc
which is unrecordable or the disc status
is unable to record.
• Insert the recordable disc and ensure
the disc status satisfies the recording
requirements (page 41).
• Clean the disc with a cleaning cloth.
• Replace the disc.
• The disc is dirty.
• The disc is damaged.
Recording Error
This disc is protected and not recordable.
You are trying to record on to the protected
disc which is set in “Disc Edit” menu.
• Release the disc protect setting in “Disc
Edit” menu (page 64).
Recording Error
• You are trying to record onto the disc
which has no space for recording.
• Insert a recordable disc with enough
recording space.
Disc is full.
(No area for new recording)
Recording Error
• You are trying to record onto the disc
on which the number of recording titles
comes up to the maximum (49).
• Delete unnecessary titles (pages 85-86).
You cannot record more than 49 titles on
one disc.
(The maximum is 49)
Recording Error
• You are trying to record onto the
DVD+RW or DVD-RW on which the
number of recording chapters comes
up to the maximum (254).
• Delete unnecessary chapter marks
(pages 90-91).
You cannot record more than 254 chapters
on one disc.
(The maximum is 254)
Recording Error
You cannot record on this disc as
Power Calibration Area is full.
• When recordings are performed
repeatedly onto an unstable disc, this
area may become full.
Every time you insert a disc for recording,
the disc’s working area will be taken up.
And if you repeat this frequently, it will
be used up sooner and you may not be
able to record the full 49 titles.
• Insert a new disc.
• If using a DVD+RW/DVD-RW try to
format the disc by “Erasing Disc” (Refer
to page 99).
Recording Error
This disc is already finalized.
• You are trying to record onto the disc
already finalized.
• Release the finalizing for this disc
(page 65).
Recording Error
• You are trying to record onto the
disc that had been recorded by other
recorders.
• Set “Make Recording Compatible” to
“ON” to rewrite the menu, after that you
will record to disc (page 43).
The disc has no recording compatibility.
Set “Make Recording Compatible” to
“ON” to convert the disc.
Recording Error
You cannot record more than 999 titles
on HDD. (The maximum is 999).
• You are trying to record onto the HDD
when total title number is already at its
limit.
• Delete unnecessary titles (pages 85-87).
Recording Error
Cannot record on this HDD.
• The internal HDD is dirty or damaged.
• There is not enough space on the
internal HDD.
• Contact the customer service center.
• Delete unnecessary titles (pages 85-87).
* If you are still having trouble with the unit after checking “TROUBLESHOOTING”, write down the error code and the
error description for calling our help line mentioned on the front page to locate an Authorized Service Center.
Download from Www.Somanuals.com. All Manuals Search And Download.
LANGUAGE CODE
Language
Abkhazian
Afar
Afrikaans
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Code
4748
4752
4759
4764
5471
4765
4772
4847
5167
4860
5072
4854
4864
4853
5971
4851
5759
4947
4961
5464
4965
5047
5160
5161
5166
5261
5256
5255
5264
5271
5358
5747
5051
5758
5360
5367
5447
5569
5455
Language
Hungarian
Icelandic
Indonesian
Interlingua
Interlingue
Inupiak
Code
5467
5565
5560
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
5761
5767
5861
5847
5868
5860
5957
5953
5965
5958
5955
5964
5961
5960
6047
6051
6061
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
Language
Russian
Samoan
Sangho
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Shona
Code
6467
6559
6553
5350
6564
6554
6566
6560
6550
6555
6565
6557
6558
6561
5165
6567
6569
6568
6658
6653
6666
6651
6654
4861
6661
6665
6664
6657
6669
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Korean
Kurdish
Laothian
Latin
Latvian; Lettish
Lingala
Macedonian
Malagasy
Malay
Malayalam
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Occitan
Oriya
Oromo (Afan)
Panjabi
Pashto; Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance
Romanian
Sindhi
Singhalese
Siswat
Slovak
Slovenian
Somali
Spanish
Sundanese
Swahili
Swedish
Tagalog
Tajik
Basque
Bengali;Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Corsican
Croatian
Czech
Danish
English
Esperanto
Estonian
Faroese
Fiji
Finnish
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish
Turkmen
Ukrainian
Urdu
Frisian
Uzbek
Galician
Georgian
German
Greenlandic
Guarani
Gujarati
Hausa
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Hebrew
Hindi
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 121
GLOSSARY
Analog Audio
PCM (pulse code modulation)
An electrical signal that directly represents sound.
The most common system of encoding digital audio,
found on CD and DAT. Excellent quality, but requires a
Compare this to digital audio which can be an electrical
signal, but is an indirect representation of sound. See also lot of data compared to formats such as Dolby Digital
“Digital Audio”.
and MPEG audio. For compatibility with digital audio
recorders (CD, MD and DAT) and AV amplifiers with
digital inputs, this unit can convert Dolby Digital and
MPEG audio to PCM. See also “Digital Audio”.
Aspect Ratio
The width of a TV screen relative to its height.
Conventional TVs are 4:3 (in other words, the TV screen
is almost square); widescreen models are 16:9 (the TV
screen is almost twice as wide as it is high).
Progressive Scan (480p)
A type of display that does not split each frame into
fields, and instead scans directly through all the scan lines
of each frame in order. Progressive scan provides less
flickering and higher image resolution than traditional
(480i) TV signals. Refer to page 113 for instructions on
selective progressive scan mode.
Block Noise
A distortion of digital images in the shape of blocks
caused by the application of data compression.
Chapter (HDD/DVD)
Just as a book is split up into several chapters, a title on
HDD/DVD is usually divided into chapters. See also “Title”.
Region Code
Regions associate discs and players with particular areas
of the world. This unit will only play back discs that have
compatible region codes. You can find the region code
of your unit by looking on the rear panel. Some discs are
compatible with more than one region (or all regions).
Component Video Output
Each signal of luminance (Y) and component (PB/CB, PR/
CR) is independent to output so that you can experience
picture color as it is.
Also, due to compatibility with progressive video (480p),
you can experience higher-density picture than that in
interlace (480i).
Sampling Frequency
The rate which sound is measured by a specified interval
to turn into digital audio data. The numbers of sampling
in one second defines as sampling frequency. The higher
the rate, the better the sound quality.
Digital Audio
An indirect representation of sound by numbers. During
recording, the sound is measured at discrete intervals
(44,100 times a second for CD audio) by an analog-
to-digital converter, generating a stream of numbers.
On playback, a digital-to-analog converter generates
an analog signal based on these numbers. See also
“Sampling Frequency” and “Analog Audio”.
SAP (secondary audio program)
Sub-audio channel which is delivered separately from
main-audio channel. This audio channel is used as an
alternate in bilingual broadcasting.
S-Video Output
It delivers independently each signal of color(C) and
luminance(Y) to TV as video signals, so that higher-quality
picture will be gained.
Dolby Digital
The system to compress digital sound developed by
Dolby Laboratories. It offers you sound of stereo(2ch) or
multi channel audio.
Title (HDD/DVD)
A collection of chapters on HDD/DVD. See also “Chapter”.
Finalize
To make DVD, which have been recorded on, possible to
play back in DVD players. With this unit, it is possible to
finalize DVD+R, DVD-RW, and DVD-R
Audio CD use tracks to divide up the content of a
disc. The DVD equivalent is called a chapter. See also
“Chapter”.
HDMI (high definition multimedia interface)
A digital interface between audio and video source. It can
transmit component video, audio, and control signal with
Video CD
A digital format for store video data in compact disc.
+VR Mode
JPEG (joint photographic experts group)
JPEG is a method of compressing still image files. You can
copy JPEG files from your personal computer to a disc,
and play them back on this unit.
+VR Mode is a recording format for DVD+RW/DVD+R/
DVD-RW/DVD-R discs.
This format allows disc editing feature to be available in
our recorder.
PBC (playback control) (video CD only)
This function enables you to play back interactive
software using a menu screen. See also “Video CD”.
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
General
HDD
MDR533H: 320 GB
MDR535H: 500 GB
MDR537H: 1 TB
Power requirements
Power consumption
Dimensions (width x height x depth)
120V AC +/- 10%, 60Hz +/- 5%
33W (standby: 5.7W)
16.6 x 2.5 x 11.5 inches (420 x 61.2 x 290mm)
MDR533H: 6.62 lbs. ( 3.00kg )
MDR537H: 7.28 lbs. ( 3.30kg )
MDR535H: 6.62 lbs. ( 3.00kg )
Weight
Operating temperature
Operating humidity
TV system
41°F (5°C) to 104°F (40°C)
Less than 80% (no condensation)
ATSC/NTSC-M TV standard
Recording
Recording format
+VR (video recording) format
DVD+Rewritable, DVD+Recordable
DVD-Rewritable, DVD-Recordable (+VR mode only)
Recording discs
Video recording format
Sampling frequency
Compression format
13.5 MHz
MPEG 2
Audio recording format
Sampling frequency
Compression format
48 kHz
Dolby Digital
Tuner
Tuning system
Channel frequency synthesized tuning system
Channel coverage (ATSC / NTSC)
Terrestrial
Cable
VHF 2~13, UHF 14~69
2~13, A~W, W+1~W+94 (analog W+1~W+84), A-5~A1, 5A
Terminals
Audio input
RCA jack x 2
2V rms (input impedance: more than 22kΩ)
1Vp-p (75Ω)
Video input
RCA jack x 1
S-Video input
Mini DIN 4-pin x 1
DV input
Y: 1Vp-p (75Ω)
IEEE 1394
C: 286mVp-p (75Ω)
DV input jack (4 pin)
VHF/UHF/Cable TV input and output
F-type
75Ω unbalanced
Audio input
RCA jack x 2
2V rms (input impedance: more than 22kΩ)
2V rms (output impedance: more than 1kΩ)
1Vp-p (75Ω)
Audio output
RCA jack x 2
Video input
RCA jack x 1
Video output
RCA jack x 1
1Vp-p (75Ω)
S-Video input
Mini DIN 4-pin x 1
S-Video output
Mini DIN 4-pin x 1
Component video output
RCA jack x 3
Y: 1Vp-p (75Ω)
Y: 1Vp-p (75Ω)
Y: 1Vp-p (75Ω)
500mVp-p (75Ω)
C: 286mVp-p (75Ω)
C: 286mVp-p (75Ω)
PB/CB: 700mVp-p (75Ω)
PR/CR: 700mVp-p (75Ω)
Coaxial digital audio output
RCA jack x 1
HDMI output
HDMI jack x 1
Note
• The specifications and design of this product are subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
Discos Reproducibles
Disco Grabable
Este aparato es compatible con la reproducción de los
siguientes discos y archivos.
Este aparato puede grabar a DVD+RW, DVD+R, DVD-RW y
Los discos DVD+R/DVD-R pueden ser grabados sólo una
vez. Los discos DVD+RW/DVD-RW pueden ser grabados y
En este aparato los discos DVD-RW/-R serán grabados
Discos reproducibles
DVD-video
Logotipos
Logotipos
Atributos
DVD+RW
DVD+R
Disco de 8 cm / 12 cm, un solo lado,
una sola capa
Tiempo de grabación máx. aprox.
(modo SLP):
DVD+RW
DVD+R
360 minutos (4,7 GB) (para 12 cm)
108 minutos (1,4 GB) (para 8 cm)
DVD-RW
(Sólo discos en modo de video finalizados)
DVD-RW
DVD-R
DVD-R
(Sólo discos en modo de video finalizados)
• Los siguientes discos se recomiendan para obtener una
buena calidad de grabación y han sido comprobados
como compatibles con este aparato. Sin embargo, según
sea la condición del medio el equipo podría no leer el
disco correctamente.
CD-DA (CD de audio)
CD de video
Verbatim
DVD+R 8x,
DVD-R 8x,
DVD-RW 4x
DVD+RW 4x,
DVD-RW 2x
JVC
Maxell
SONY
TDK
DVD+R 4x/8x/16x, DVD-R 8x/16x
DVD+R 4x/8x/16x, DVD+RW 4x
DVD+R 4x/8x/16x
El comportamiento de cualquier otro disco no está
garantizado.
CD-RW
• Usted puede reproducir discos DVD+RW en la
mayoría de los reproductores de DVD sin finalizarlos.
Sin embargo, si usted ha añadido o eliminado
capítulos, u ocultado capítulos, debe ejecutar
“Compatibilizar edic.” antes de poder ver dichos
efectosenotrosequipos.(Consultelapágina100.)Para
reproducir discos que no sean DVD+RW en otros
reproductores de DVD, usted necesitará finalizarlos.
(Consulte la página 65.)
CD-R
KODAK Picture CD
Disco no Grabable
• Un DVD-RW grabado en un modo distinto de +VR no
será grabable en este aparato a menos que usted borre
todo el contenido del disco. (Consulte la página 99.)
• Un DVD-R grabado en un modo distinto de +VR no será
grabable en este aparato.
Archivos reproducibles
Soportes
DVD+RW/+R
DVD-RW/-R
CD-RW/-R
JPEG
es una marca registrada de
DVD Format/Logo Licensing Corporation.
Códigos de Región
El número presente en el interior
el globo se refiere a una región
del mundo.Este aparato puede
reproducir discos DVD que estén
rotulados para ALL las regiones o
para la región 1.
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
Conexión Básica
cable RCA de vídeo
cable RCA de audio
VIDEO IN
VIDEO
OUT
AUDIO IN
L
L
R
R
AUDIO OUT
parte trasera de la unidad
VIDEO VIDEO
IN OUT
Y
L
L
R
R
IN
OUT
COAXIAL
AUDIO IN
(L1)
ANTENNA
S-VIDEO AUDIO OUT
S-VIDEO
ANT. IN
Esta conexión es de Pasar a
través de la televisión solamente
antena de
VHF / UHF
cable
coaxial de RF
o
cable
ANTENNA
coaxial
empresa de
TV por cable
de RF
Cables suministrados:
• cable coaxial de RF x 1
• cable RCA de audio (L/R) x 1
• cable RCA de vídeo x 1
Por favor, compre el resto de los cables necesarios en su tienda local.
Conexión a un Televisor con un Puerto Compatible con HDMI
• HDMI emite las señales de video/audio sin convertirlas en señales analógicas.
• No es necesaria una conexión de audio.
HDMI IN
cable HDMI
HDMI OUT
parte trasera de la unidad
VIDEO VIDEO
Y
IN
OUT
L
L
R
R
IN
OUT
COAXIAL
AUDIO IN
ANTENNA
S-VIDEO AUDIO OUT
S-VIDEO
(
)
L1
ANT. IN
Esta conexión es
de Pasar a través
de la televisión
solamente
antena de
VHF / UHF
cable
coaxial
de RF
No incline el conector para introducirlo en la toma HDMI y compruebe que el tipo
de toma corresponde con el tipo de conector.
o
cable coaxial
de RF
empresa de
TV por cable
ANTENNA
Cables suministrados:
• cable coaxial de RF x 1
Por favor, compre el resto de los cables necesarios en su tienda local.
Download from Www.Somanuals.com. All Manuals Search And Download.
ES 125
ESPAÑOL
Modo HDMI y señales efectivas de salida
Presione [HDMI] para seleccionar el modo de salida HDMI. Cada vez que se presiona [HDMI] el modo de salida varía
como sigue.
La conexión HDMI hace que esta unidad transmita automáticamente la resolución más adecuada para su TV.
Pantalla del
panel frontal
Señal de salida
de video
Progresivo de 480
Progresivo de 720
1080 entrelazado
Progresivo de 1080
Presione [HDMI]
Presione [HDMI]
Presione [HDMI]
Presione [HDMI]
• El modo HDMI que no esté admitido por el
dispositivo de exhibición será pasado por alto.
Configuración Inicial
Cuando usted encienda este aparato por primera vez necesita seguir estos pasos.
Presione [STANDBY/ON y].
Utilice [KL] para seleccionar el tipo de
señal de emisión, y luego presione [OK].
la cual está conectado el aparato.
Ajuste inicial
Ajuste de Canal
Utilice [KL] para seleccionar su
idioma deseado, y luego presione
[OK] para establecerlo.
Verificar que la antena esté
conectada a la toma "ANTENNA IN".
Antena
Cable (Analógico)
Cable (Analógico/Digital)
Initial Setup
Ajuste Auto escaneará los canales terrrestres.
Esto tarda unos momentos en finalizar.
Language
English
Français
Español
El equipo comenzará a obtener los canales
disponibles en su región.
Utilice [{B] para seleccionar un
Elija idioma de preparación.
elemento a configurar, y utilice [K/ L
para seleccionar el contenido de su
preferencia, y luego presione [OK].
]
Ajste Manual de Reloj
ENE / 06 / 2012 ( VIE )
12 : 00 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
Reproducción Directa
Si usted está reproduciendo los títulos de una unidad de disco rígido, presione primero [HDD] y luego continúe al paso 2.
Si usted está reproduciendo los títulos de un DVD, presione primero [DVD].
Presione [OPEN/CLOSE A]
para abrir la bandeja de
discos e insertar su disco
con el rótulo aupntando
hacia arriba. Apuntando
de nuevo [OPEN/CLOSE A] para
cerrar la bandeja de discos.
Para iniciar una reproducción
presione [PLAY B].
2
3
Para detener momentáneamente la
reproducción presione [STOP C]
una vez.
• Consulte “Resume Playback” en la página 74.
* Asegúrese de que el disco sea compatible con
este aparato. (Para obtener la lista de discos
compatibles consulte la página 124.)
Grabación Básica
Si usted está reproduciendo los títulos de una unidad de disco rígido, presione primero [HDD] y luego continúe al paso 2.
Si usted está reproduciendo los títulos de un DVD, presione primero [DVD]
Presione [OPEN/CLOSE A]
para abrir la bandeja de
discos e insertar su disco
con el rótulo aupntando
hacia arriba. Apuntando
de nuevo [OPEN/CLOSE A]
para cerrar la bandeja de discos.
Presione [REC] para iniciar la
grabación.
Para configurar la grabación a un toque
con temporizador (OTR)...
Esta es una manera sencilla de configurar el tiempo de
grabación en bloques de 30 minutos.
Presione [REC] repetidamente hasta que aparezca en la
pantalla del televisor la longitud deseada de grabación
(30 minutos a 6 horas).
* Asegúrese de que el disco sea compatible con
este aparato. (Para obtener la lista de discos
compatibles consulte la página 124.)
Para seleccionar un modo de grabación
presione repetidamente [REC MODE].
Comenzará la grabación a un toque con temporizador.
I
0h30m
Calidad del video
y el sonido
Modo de
grabación
Tiempo de grabación
0h30m
1h00m
Disco de 8 cm Disco de 12 cm
(grabación normal)
6h00m
18 min
36 min
45 min
54 min
72 min
108 min
60 min
120 min
150 min
180 min
240 min
360 min
HQ
SP
SPP
LP
EP
SLP
Mejor
5h30m
Para cambiar la duración de la grabación durante la
grabación a un toque con temporizador:
Presione [REC] repetidamente hasta que aparezca la
duración deseada.
Buena
Calidad del video
y el sonido
Modo de
grabación
Tiempo de grabación
HDD (interno)
MDR533H MDR535H MDR537H
Para cancelar la grabación a un toque con
temporizador dentro del tiempo especificado:
61 hrs
123 hrs
154 hrs
185 hrs
247 hrs
371 hrs
100 hrs
201 hrs
251 hrs
302 hrs
403 hrs
604 hrs
208 hrs
417 hrs
521 hrs
626 hrs
835 hrs
1252 hrs
HQ
SP
SPP
LP
EP
SLP
Mejor
Presione [STOP C]
Para de tener la grabación presione
[STOP C].
Buena
Seleccione un canal externo de
entrada adecuado presionando
[SOURCE] o [CHANNEL
/
].
Presione [DTV/TV] para seleccionar TV
analógica o TV digital, luego y utilice
[CHANNEL
/
] o [los botones
numéricos] y [ • ] (para canales de TV
digital) para seleccionar un canal que
se desee grabar.
Consulte “Switching Analog Mode/Digital Mode”
y “Channel Selection” en la página 35.
Download from Www.Somanuals.com. All Manuals Search And Download.
ES 127
ESPAÑOL
Copiado Básica
Utilice [s/ B] para seleccionar un
modo de grabación deseado, y luego
presione [OK].
Utilice [K/ L] para seleccionar “Sí”, y
luego presione [OK].
El copiado comenzará.
Para detener el copiado en curso:
Presione [CSTOP] en el panel frontal.
Presione [STOP C] en el control remoto durante
2 segundos.
Presione [MENU] en el modo de
detención.
1
Utilice [K/ L] para seleccionar
“Doblaje”, y luego presione [OK].
A la hora de realizar una copia del HDD al DVD
aparecerá un mensaje de confirmación;
seleccione “Sí”.
Utilice [K/ L] para seleccionar
Copiado a un toque......
Con el copiado a un toque, usted puede comenzar a
copiar de inmediato con sólo un toque.
Para copiar el contenido de un DVD que está finalizado
en otro equipo, utilice esta función.
Durante la reproducción del título que desea
copiar, presione [DUBBING].
Si usted está reproduciendo un DVD, el copiado del DVD
a la unidad de disco rígido comenzará de inmediato.
Si usted está reproduciendo una unidad de disco rígido,
el copiado de la unidad de disco rígido al DVD
comenzará de inmediato.
• El copiado comenzará desde el comienzo del título que
está siendo reproducido.
• El aparato sólo copiará el título que está siendo
reproducido.
• Cuando se copia de una unidad de disco rígido a un
DVD, el modo de grabación será configurado
automáticamente a “Alto” cada vez que se satisfagan las
condiciones (consulte la página 54). De lo contrario, será
aplicado automáticamente el último modo de
grabación seleccionado.
“HDD DVD”, y luego presione [OK].
Utilice [KL] para seleccionar
“DVD HDD”, y luego presione [OK].
Utilice [K/ L] para seleccionar
“Añadir”, y luego presione [OK].
HDD
DVD
3000 MB
Lista doblaje
Añadir
Borrar todo
Inic de doblaje
Utilice [KLsB] para seleccionar
un título deseado, y luego presione
[OK].
En la esquina superior de cada título aparece el
número en el orden de selección.
Repita el paso 5 hasta que haya
registrado todos los títulos que
desea copiar; a continuación,
presione [DUBBING].
Para detener el copiado en curso:
[CSTOP] en el panel frontal.
Presione [STOP C] en el control remoto durante 2 segundos.
A la hora de realizar una copia del HDD al DVD aparecerá un
mensaje de confirmación; seleccione “Sí”.
Lista de Títulos
ABCDE
12:00AM (10:00:00) VIE ENE/ 6/12 CH10 SP
1
4
1
5
2
5
3
4
3
6
2
Plus. ‘DUBBING’ y confirme.
1 / 6
Luego de añadir todos los títulos que
desea, utilice [K/ L] para seleccionar
“Inic de doblaje” en el menú de
copiado, y luego presione [OK].
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
ES 131
LIMITED
FUNAI CORill repair this product, free of charge in the USA in the event of defect in materials or
workmanship as follows:
PFUNAI CORwill provide parts to replace defective parts without charge for one (1) year from the
FUNAI CORwill provide the labor without charge for a period of ninety (90) days from the date of
Note:Any product sold and identified as refurbished or renewed carries a ninety (90) days labor
and parts limited warranty.
LIMITS AND EXCLUSIONS:
THIY TIL PURCHASER.A PURCHASE RECEIPT
WILL BE REQUIREDOGETHE
HIS
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered replaced defaced missing
rThis limited warranty does not apply to any
product not purchased and used in the United States.
products not supplied by FUNAI COR. or damage, which results from accident, misuse abuse, mishandling,
misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or
office use of this product or damage which results from fire flood lightning or other acts of God.
THIARRANTY DOES NOT COVER PACKING MATERIALS AN
CONTROL),ANY COSMETIC PARTSCOMPLETEASSEMBRTSDEMO OR FLOOR MODELS.
AAGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL,
INDIRECT OR CONSEQUENTIAL DAMAGESRISING OUT OF OR OCCASIONED BHE USE OF OR
THE INABILITO USETHISARRANTIES,
EXPRESS OR IMPLIED AND OFWARRANTIES
INCLUDINGARRANTY OF MERCHANTABILITYND FITNESS FORP
HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTTT
ALN
THISY VTHE UNIT IS CARRIED-INON
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OFT.
TACHED,THE
COSTSW
THIS LIMITEDAVE OTHER RIGHT
NTIME DURINGARRANTY PERIOD,YOU ARE UNABLET
NITH
HE RIGHTTO MODIFAFT
obtain warranty service,you must take the productr deliver the product freight prepaid in either its original
o any
locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please
e
2200 Spiegel Drive, Groveport, OH 43125
E2S05UD / E2S07UD / E2S08UD / E2S05UH / E2S07UH / E2S08UH
1VMN32933A ★★★★
Printed in China
*
1
V
M
N
3
2
9
3
3
A
*
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Krups Espresso Maker XP 4050 User Manual
Lenovo Computer Drive 40Y8626 User Manual
Makita Power Hammer HR2420 User Manual
Mamiya Digital Camera 645 AFD III User Manual
Manitowoc Ice Air Compressor J 0600 User Manual
Marantz Music Pedal RC2001 User Manual
Maxtor Computer Drive 3000DV User Manual
Maytag Clothes Dryer W10562334A User Manual
Meade Telescope 102ED User Manual
Melissa Vacuum Cleaner 640 045 User Manual