Owner’s Manual
Please read before using this unit.
DVD/CD Player with Video Cassette Recorder
INSTRUCCIONES EN
ESPAÑOL INCLUIDAS.
MWD2206A
Supplied Accessories
Remote control (NB179UD) RF cable
with two AA batteries
(WPZ0901TM002)
Audio/Video cables
(WPZ0102TM015 /
WPZ0102LTE01)
Owner’s Manual
(1VMN2256ꢀ)
If you need additional operating assistance
after reading this owner’s manual, please call
TOLL FREE : 1-800-605-8610
or visit our web site at
Owner's Manual
Table of Contents
Precautions
■ Recording................................................................................. 12
Recording & OTR (One Touch Recording) ............................... 12
Timer Recording........................................................................ 12
Hints for OTR and Timer Recording.......................................... 1ꢀ
Copying a Video Tape............................................................... 14
Laser Safety................................................................................ 2
■ Important Safeguards................................................................ 3
Location and Handling ................................................................ 4
Avoid the Hazards of Electrical Shock and Fire.......................... 4
Moisture Condensation Warning................................................. 4
About Copyright .......................................................................... 4
Symbols Used in This Manual..................................................... 4
Maintenance................................................................................ 4
■ About the Video Cassettes and Discs ..................................... 5
Playable Video Cassettes ........................................................... 5
Playable Discs............................................................................. 5
Unplayable Discs ........................................................................ 5
DVD Functions
■ Playback ................................................................................... 15
■ On-Screen Display................................................................... 16
■ Search Functions..................................................................... 17
Using Track Search................................................................... 17
Using Title / Chapter Search..................................................... 17
Using Time Search.................................................................... 17
Marker Setup............................................................................. 17
■ Repeat / Random / Programmed Playback............................ 18
Repeat Playback / Repeat A-B Playback
Random Playback / Programmed Playback.............................. 18
■ Special Settings....................................................................... 19
Subtitle Language / Audio Language / Camera Angle
Black Level Setting / Stereo Sound Mode / Virtual Surround.... 19
■ DVD Setup ................................................................................ 20
LANGUAGE Setting.................................................................. 20
DISPLAY Setting....................................................................... 21
AUDIO Setting........................................................................... 21
PARENTAL Setting................................................................... 22
OTHERS Setting....................................................................... 22
Reset to the Default Setting (Except for PARENTAL Setting) .. 2ꢀ
Setup
■ Connections............................................................................... 6
RF Output Channel ..................................................................... 6
Hint for Cable Box or Satellite Box.............................................. 6
Connection to an Audio System.................................................. 6
Connection to a TV ..................................................................... 7
■ Preparation for Use ................................................................... 8
Turn On the Unit for the First Time ............................................. 8
To Add or Delete Channels......................................................... 8
Clock Setup................................................................................. 8
■ Function Overview..................................................................... 9
Front Panel Indicator................................................................... 9
VCR / DVD Switching.................................................................. 9
Front & Rear Terminals............................................................... 9
Remote Control......................................................................... 10
Installing the Batteries for the Remote Control ......................... 10
Information
■ Troubleshooting Guide ........................................................... 23
■ Specifications .......................................................................... 24
■ Language Code List ................................................................ 24
■ Limited Warranty ..................................................................... 24
■ Español..................................................................................... 25
■ Quick Use Guide...................................................................... 27
VCR Functions
■ Playback ................................................................................... 11
■ Other Operations ..................................................................... 11
Index Search............................................................................. 11
Time Search.............................................................................. 11
Auto Repeat .............................................................................. 12
Basic TV Connection
Antenna
or
Cable TV Antenna
signal
or
Cable TV
signal
(Back of DVD/VCR)
(Back of TV)
4
AC
outlets
(Back of TV)
Plug in
ANT-IN
2
ANT-OUT
Disconnect
3
Connect
Connect
From DVD/VCR
From TV
RF cable (supplied)
Please refer to “Connections” on page 6.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFEGUARDS
1. Read Instructions - All the safety and operating instruc-
tions should be read before the appliance is operated.
2. Retain Instructions- The safety and operating instructions
should be retained for future reference.
ꢀ. Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions
should be followed.
5. Cleaning - Unplug this video product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna-discharge unit,
connection to grounding electrodes, and requirements for
the grounding electrode. (Fig. A)
FIGURE A
ANTENNA
LEAD
WIRE
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
EXCEPTION: A product that is meant for uninterrupted
service and, that for some specific reason, such as the
possibility of the loss of an authorization code for a CATV
converter, is not intended to be unplugged by the user for
cleaning or any other purpose, may exclude the reference
to unplugging the appliance in the cleaning description
otherwise required in item 5.
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMP
NEC – NATIONAL ELECTRICAL CODE
S2898A
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
6. Attachments - Do not use attachments not recommended
by the video product manufacturer as they may cause
hazards.
7. Water and Moisture- Do not use this video product near
water, for example, near a bath tub, wash bowl, kitchen
sink, or laundry tub, in a wet basement, or near a
swimming pool, and the like.
14. Lightning - For added protection for this video product
during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This
will prevent damage to the video product due to lightning
and power-line surges.
15. Power Lines - An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact with
them might be fatal.
16. Overloading - Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
17. Object and Liquid Entry - Never push objects of any kind
into this video product through any openings as they may
touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill liquid of
any kind on the video product.
18. Servicing - Do not attempt to service this video product
yourself as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all servicing
to qualified service personnel.
8. Accessories - Do not place this video product on an
unstable cart, stand, tripod, bracket, or table. The video
product may fall, causing serious injury to a child or adult,
and serious damage to the appliance. Use only with a
cart, stand, tripod, bracket, or table recommended by the
manufacturer, or sold with the video product. Any mount-
ing of the appliance should follow the
manufacturer's instructions and should
use a mounting accessory recommended
by the manufacturer. An appliance and
cart combination should be moved with
care. Quick stops, excessive force, and
uneven surfaces may cause the appli-
ance and cart combination to overturn.
9. Ventilation - Slots and openings in the cabinet are pro-
vided for ventilation and to ensure reliable operation of
the video product and to protect it from overheating, and
these openings must not be blocked or covered. The
openings should never be blocked by placing the video
product on a bed, sofa, rug, or other similar surface. This
video product should not be placed in a built-in installa-
tion such as a bookcase or rack unless proper ventilation
is provided or the manufacturer's instructions have been
adhered to.
19. Damage Requiring Service - Unplug this video product
from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the
video product.
10. Power Sources - This video product should be operated
only from the type of power source indicated on the
marking label. If you are not sure of the type of power
supply to your home, consult your appliance dealer or
local power company. For products intended to operate
from battery power, or other sources, refer to the
operating instructions.
c. If the video product has been exposed to rain or water.
d. If the video product does not operate normally by
following the operating instructions. Adjust only those
controls that are covered by the operating instructions
as an improper adjustment of other controls may result
in damage and will often require extensive work by a
qualified technician to restore the video product to its
normal operation.
11. Grounding or Polarization - This video product is
equipped with a polarized alternating-current line plug (a
plug having one blade wider than the other). This plug
will fit into the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should still fail to
fit, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
12. Power Cord Protection - Power supply cords should
be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience recep-
tacles, and the point where they exit from the appliance.
1ꢀ. Outdoor Antenna Grounding - If an outside antenna or
cable system is connected to the video product, be sure
the antenna or cable system is grounded so as to provide
some protection against voltage surges and built-up static
charges. Article 810 of the National Electrical Code, ANSI/
NFPA No. 70, provides information with regard to proper
e. If the video product has been dropped or damaged in
any way.
f. When the video product exhibits a distinct change in
performance this indicates a need for service.
20. Replacement Parts - When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer or have
the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other
hazards.
21. Safety Check - Upon completion of any service or repairs
to this video product, ask the service technician to per-
form safety checks to determine that the video product is
in proper operating condition.
22. Heat - This video product should be situated away from
heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
–
–
ꢀ
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Location and Handling
Symbols Used in This Manual
•
Do not stand this unit up vertically. Install this unit in a hori-
zontal and stable position. Do not place anything directly on
top of this unit. Do not place this unit directly on top of the TV.
The following symbols appear in some headings in this
manual.
: Description refers to playback or recording of
video cassette tapes.
• Depending on the TV, noise or disturbance of the picture
and/or sound may be generated if this unit is placed too
close to your TV. In this case, please ensure enough space
between your TV and this unit.
:
Description refers to playback of DVD-Video discs.
• Do not cover or place this unit in enclosed spaces to prevent
excessive temperature build up.
: Description refers to playback of Audio CDs.
•
Do not place this unit in direct sunlight, or near heat sources.
• Depending on the environment, the temperature of this unit
may increase slightly. This is not a malfunction.
• Keep this unit away from strong magnetic objects.
• Do not place any object containing water or other liquids on
this unit. In the event that liquid should enter the cabinet,
unplug this unit immediately and contact the retailer or an
Authorized Service Center immediately.
• Do not remove this unit cabinet. Touching parts inside the
cabinet could result in electric shock and/or damage to this
unit. For service and adjustment inside the cabinet, call a
qualified dealer or an Authorized Service Center.
• Be sure to remove disc and video tape and unplug the AC
power cord from the output before carrying this unit.
Maintenance
SERVICING
• Please refer to relevant topics on the “Troubleshooting
Guide” on page 2ꢀ before returning the product.
• If this unit becomes inoperative, do not try to correct the
problem by yourself. There are no user-serviceable parts
inside. Turn off, unplug the power plug, and please call
our help line mentioned on the front page to locate an
Authorized Service Center.
CLEANING THE CABINET
• Use a soft cloth slightly moistened with a mild detergent
solution. Do not use a solution containing alcohol, spirits,
ammonia or abrasive.
Avoid the Hazards of Electrical Shock and Fire
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it from
AC wall outlet. Grasp it by the plug.
CLEANING DISCS
• When a disc becomes dirty, clean it with a cleaning cloth.
Wipe the disc from the center to out. Do not wipe in a circu-
lar motion.
• If, by accident, water is spilled on this unit, unplug the power
cord immediately and take the unit to our Authorized Service
Center for servicing.
•
Do not use solvents such as benzine, thinner, commercially avail-
able cleaners, detergent, abrasive cleaning agents or antistatic
spray intended for analog records.
•
Do not put your fingers or objects into the unit cassette holder.
Moisture Condensation Warning
CLEANING THE DISC LENS
Moisture may form inside this unit under the following condi-
tions:
• Immediately after a heater is turned on.
• In a steamy or humid room.
• When this unit is suddenly moved from a cold to warm envi-
ronment.
• If this unit still does not perform properly although you refer
to the relevant sections and to “Troubleshooting Guide” in
this Owner’s Manual, the laser optical pickup unit may be
dirty. Consult your dealer or an Authorized Service Center
for inspection and cleaning of the laser optical pickup unit.
If moisture forms inside this unit, it may not operate
properly or damage the video tape. In such case, turn on
the power and wait for more than 2 hours for the moisture to
evaporate.
DISC HANDLING
• When you handle a disc, hold it by its edge and try not to
touch the surface of the disc.
• Always store the disc in its protective case when it is not
used.
About Copyright
AUTO HEAD CLEANING
• Automatically cleans video heads as you insert or remove a
cassette, so you can see a clear picture.
Unauthorized copying, broadcasting, public performance and
lending of discs are prohibited.
This product incorporates copyright protection technology that
is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be
authorized by Macrovision, and is intended for home and
other limited viewing uses only unless otherwise authorized by
Macrovision. Reverse engineering or disassembly is
prohibited.
• Playback picture may become blurred or interrupted while
the TV program reception is clear. Dirt accumulated on the
video heads after a long period of use, or the usage of rental
or worn tapes can cause this problem. If a streaky or snowy
picture appears during playback, the video heads in your
unit may need to be cleaned.
1. Please visit your local Audio/Video store and purchase a
good quality VHS Video Head Cleaner.
2. If a Video Head Cleaner does not solve the problem,
please call our help line mentioned on the front page to
locate an Authorized Service Center.
Note to CATV system installer
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in
particular, specifies that the cable ground should be
connected to the grounding system of the building,
as close to the point of cable entry as practical.
Hint
•
Remember to read the instructions along with the video head cleaner before use.
• Clean video heads only when problems occur.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
–
–
4
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
About the Video Cassettes and Discs
Playable Video Cassettes
Use only cassettes marked
with this unit.
Playable Discs
Playable
Mark (logo)
discs
Recorded
signals
Region code
Disc size
Disc types
DVD-Video
*1, 2, ꢀ, 5, 9
or
DVD-RW
DVD-R
*1, ꢀ, 4, 5, 6,
8, 9, 10
Example
12 cm
or
8 cm
Title 1
Title 2
Digital video
(MPEG2)
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1
Chapter 2
DVD+RW
DVD+R
*1, ꢀ, 4, 5, 7,
8, 9, 10
Audio CD
*ꢀ, 5, 9
Example
12 cm
or
Digital audio
Track 1
Track 2
Track 5
Track 6
Track 3
Track 4
CD-RW
CD-R
8 cm
*ꢀ, 4, 5, 8, 9
is a trademark of DVD Format/Logo Licensing Corporation.
If you cannot play back a disc which bears one of the marks above, check the following notes.
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back.
*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc’s producers.
*ꢀ: Scratched or stained discs may not be played back.
*4: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or spe-
cial properties of discs.
*5: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not play them
back. Even if they are played back, the sound or video quality will be compromised.
*6: You may play back the unfinalized DVD-R/RW disc recorded in the video format on our brand’s DVD recorder. However,
depending on the recording status of a disc, the disc may not be played back at all or normally (the picture or sound may
not be smooth, etc.). In this case, you need to finalize the disc with the DVD recorder. Refer to the manual accompanying
the DVD recorder.
*7: Only the discs recorded in the video format and finalized can be played back.
Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be played back at
all the picture or sound may not be smooth, etc.
*8: If the recorded portion of the disc is too small (less than 2 ꢀ/16 inches (55 mm) across), it may not play back properly.
*9: Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it correctly.
*10: Discs Recorded in the VR (Video Recording) format cannot be played back.
Unplayable Discs
NEVER play back the following discs. Otherwise, malfunction may result!
DVD-RAM / DVD-Audio / CD-i / Photo CD / Video CD / DVD with region codes other than 1 or ALL / DVD-ROM for personal
computers / CD-ROM for personal computers
On the following disc, the sound MAY NOT be heard.
Super Audio CD
NOTE: Only the sound recorded on the normal CD layer can be delivered.The sound recorded on the high density Super Audio
CD layer cannot be delivered.
Any other discs without compatibility indications
–
–
5
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
Connections
Please refer to “Basic TV Connection” on the front page before you use this unit.
RF Output Channel
If channel 3 has been already occupied
for broadcasting,
5) After a few seconds, press and hold
[PLAY B] on the unit for ꢀ seconds.
• The RF output channel will change to
channel 4 from channel ꢀ and you will
see a playback picture.
• When a picture does not appear on the
TV screen, repeat step 4.
Hint
• The RF output channel does not
change when you adjust tracking
during playback. In this case, stop the
playback, and start the playback again.
After that, press and hold [PLAY B]
on the unit for ꢀ seconds again.
1) Set your TV to channel 4.
2) Insert a pre-recorded tape into this unit.
ꢀ) Press [SOURCE] on the unit so that the
VCR OUTPUT light is lit.
•
If noise appears on the TV screen, press
[VCR/TV] on the remote control.
6) Press [STOP C] to stop playback.
4) Press [PLAY B] once.
Hint for Cable Box or Satellite Box
To select channels of the cable box or satellite box
1) Turn on the unit by pressing [STANDBY-ON], then press
[VCR/TV]. The POWER ON indicator on the front panel
(Back of DVD/VCR)
(Cable box or
Satellite box)
ANT-IN
Satellite or
Cable TV
signal
IN
O
U
T
G
K
H
L
ANT-OUT
will light, then press [SKIP/CH.
/
,
/
] to select
RF cable
(supplied)
channel ꢀ or 4 (the same channel as the output channel of
the cable box or satellite box).
• If you use the channel 4, you need to change the unit’s
RF output to channel 4. Refer to “RF Output Channel”.
2) At the TV, select channel ꢀ or 4 (the same channel as you
have selected at step 1).
(Back of TV)
Select this connection when you want to view or record a
scrambled channel. With this connection, channels cannot be
changed on the unit. You can view or record ONLY
the channels you have selected on the cable box or the
satellite box.
ꢀ) On the cable box or satellite box, select the channel you
want to view or record.
•
While you are recording, only the recorded channel can be viewed.
Connection to an Audio System
Method 1
Method 2
Dolby Digital decoder,
MD deck or DAT deck
Stereo system
Audio
COAXIAL
L
R
Digital audio
input jack
Analog audio
input jacks
Audio Coaxial
Digital cable
(commercially
Audio cable
(supplied)
available)
DVD
AUDIO S-VIDEO
OUT OUT
DVD/VCR
AUDIO OUT
VCR
COMPONENT
DIGITAL
VIDEO OUT
AUDIO OUT
L
AUDIO OUT
(Analog)
R
COAXIAL
DIGITAL
AUDIO OUT
DVD/VCR
or
DVD
SETUP > QUICK>
DOLBY DIGITAL
Setting
COMPONENT
VIDEO OUT
DIGITAL
AUDIO S-VIDEO
OUT OUT
AUDIO OUT
Connection
L
Connecting to a Dolby Digital decod-
er for Dolby Digital audio output.
R
BITSTREAM
(DVD mode only)
Connecting to the other equipment
(an MD deck or DAT deck etc.) with-
out Dolby Digital decoder.
PCM
Hint
• Playing a DVD using incorrect settings may generate noise distortion and may
also damage the speaker.
* To complete these settings, refer to pages 20-21.
Hint
• The audio source on a disc in a Dolby Digital 5.1 channel surround format can-
not be recorded as digital sound by an MD or DAT deck.
• By hooking this unit up to a 5.1 channel Dolby Digital decoder, you can enjoy
high-quality Dolby Digital 5.1 channel surround sound as heard in the movie
theaters.
• Playing a DVD using incorrect settings may generate noise distortion and may
also damage the speakers.
–
–
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to a TV
Basic Audio
Method 1
Method 2
Method 3
TV
AUDIO IN
L
R
Better picture
Good picture
Best picture
COMPONENT
VIDEO IN
Y
S-VIDEO IN
VIDEO IN
CB
Audio cable
(supplied)
C
R
S-Video cable
(commercially
available)
Video cable
(supplied)
DVD/VCR
DVD/VCR
AUDIO OUT
VCR
Component Video cable
(commercially available)
L
DVD
DVD/VCR
AUDIO OUT
VCR
COMPONENT
VIDEO OUT
DIGITAL
AUDIO S-VIDEO
AUDIO OUT
OUT
OUT
Y
L
AUDIO IN
VIDEO IN
L
R
C
B
R
R
COAXIAL
VIDEO OUT
R
C
DVD
AUDIO S-VIDEO
OUT OUT
DVD/VCR
VCR
DVD
AUDIO S-VIDEO
OUT OUT
COMPONENT
COMPONENT
VIDEO OUT
VIDEO OUT
or
Y
DVD
AUDIO S-VIDEO
OUT OUT
CE
DIGITAL
AUDIO OUT
C
B
R
VIDEO OUT
L
C
R
AUDIO OUT
(Analog)
VIDEO OUT
S-VIDEO OUT
COMPONENT VIDEO OUT
Hint
• Connect this unit directly to the TV. If the Audio/Video cables are connected to a VCR, pictures may be distorted due to the copy protection system.
• The COAXIAL, DVD AUDIO OUT, S-VIDEO OUT and COMPONENT VIDEO OUT jacks are only useful in DVD mode.
After you have completed connections
Press the input selector button (usually TV/VIDEO, INPUT or AUX) on your TV to switch an appropriate external input channel
(usually near channel 0) for viewing the picture from this unit. If the picture does not appear, also refer to the manual accompa-
nying your TV.
INPUT MODES FOR COMMON TV BRANDS
Listed below are inputs for common brand name TV’s.
Admiral:
Curtis Mathis:
GE:
AUX
Panasonic:
RCA:
Samsung:
Sanyo:
Sharp:
Sony:
Toshiba:
Zenith:
TV/VIDEO
LINE1, LINE2, 00, 90, 91, 92, 9ꢀ
INPUT, TV/VCR, 00, 90, 91, 92, 9ꢀ
INPUT, TV/VCR, 00, 90, 91, 92, 9ꢀ
TV/VIDEO
Hitachi:
INPUT, AUX
VIDEO
JVC:
VIDEO, VIDEO1, VIDEO2, VIDEOꢀ
00
Kenwood:
LXI-Series:
Magnavox:
AUX
00
AUX CHANNEL
VIDEO1, VIDEO2, VIDEOꢀ
TV/GAME
00
–
–
7
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation for Use
To Preset the Channel Again
1) Press [MENU] until the main menu appears.
2) Select “CHANNEL SET UP” by using [K//L], then press [B]
ꢀ) Select “AUTO SET UP” by using [K//L], then press [B]. After
Turn On the Unit for the First Time
VCR
Operation described in this manual are
mainly based on the remote control.
.
Turn on the TV and set it to channel ꢀ.
• If channel ꢀ has been already occupied for broadcasting,
see “RF Output Channel” section on page 6.
scanning, the tuner stops on the lowest memorized channel.
1
2
To Change the On-Screen Language
1) Press [MENU] until the main menu appears.
2) Select “LANGUAGE SELECT” by using [K/L], then
press [B].
ꢀ) Select “ENGLISH” , “FRANCAIS” or “ESPAÑOL” by
using [K/L] then press [CLEAR/C.RESET].
Select your language in the first time you turn on this unit.
LANGUAGE SELECT
Then press [B] to go to next step.
B ENGLISH
FRANCAIS
ESPAÑOL
[ON]
STANDBY-ON
or
Hint
CH 01
Press [B] to start Auto Set Up.
3
• If you accidentally select Spanish or French and need English: Press [MENU]
and choose SELEC. IDIOMA or SELECTION LANGUE. Press [B] and select
ENGLISH. Finally, press [CLEAR/C.RESET].
AUTO SET UP
Do you connect the cable from the cable box or the satellite box to the unit’s
ANT-IN jack?
Clock Setup
VCR
YES
NO
Yes Press [MENU] to exit.
Press [MENU] and select “CLOCK SET”.
Then press [B] to go to next step.
• Refer to “Hint for Cable Box or Satellite Box” section on page 6.
1
- M E N U -
TIMER PROGRAMMING
AUTO REPEAT
CHANNEL SET UP
B CLOCK SET
[OFF]
No Please wait for a few minutes. After scanning...
MENU
• The tuner stops on the lowest memorized channel.
LANGUAGE SELECT
or
• You can select only the channels memorized in this unit by using
[SKIP/CH. G//K, H//L] (or [CHANNEL K///L]).
• If “AUTO SET UP” appears on the TV screen again, check the cable
connections. Then, press [B] once again.
• If the clock is not set, the CLOCK SET screen appears when you press
[MENU]. In this case, go to step 2.
CLOCK SET
Select the current month.
Then press [B] to go to next step.
Hint
2
3
MONTH DAY
1 0 – –
YEAR
– – – –
/
• Repeat these steps only if either there was a power failure or this unit has been
unplugged for more than ꢀ0 seconds.
HOUR MINUTE AM/PM
– –
:
– –
– –
or
To Select a Channel
You can select a channel by using the Number buttons or
CLOCK SET
Select the current day.
Then press [B] to go to next step.
[
SKIP/CH.
G
/
K
,
H/L].
MONTH DAY
1 0 0 2
YEAR
– – – –
/
Notes for using the Number buttons:
• When selecting cable channels which are higher than 99,
enter channel numbers as a three-digit number. (for exam-
ple: 117, press [1], [1], [7])
HOUR MINUTE AM/PM
– –
:
– –
– –
or
• You must precede single-digit channel numbers with a zero.
(for example: 02, 0ꢀ, 04 and so on)
CLOCK SET
Select the current year.
Then press [B] to go to next step.
4
5
MONTH DAY
1 0 0 2
YEAR
/
2 0 0 6
HOUR MINUTE AM/PM
To Add or Delete Channels
– –
:
– –
– –
or
VCR
Select the current hour.
Then press [B] to go to next step.
CLOCK SET
MONTH DAY
1 0
YEAR
Press [MENU] to select “CHANNEL SET UP”.
Then press [B] to go to next step.
/
0 2 MON 2 0 0 6
1
- M E N U -
HOUR MINUTE AM/PM
TIMER PROGRAMMING
0 5
:
– –
– –
or
AUTO REPEAT
B CHANNEL SET UP
CLOCK SET
[OFF]
MENU
LANGUAGE SELECT
or
CLOCK SET
Select the current minute.
Then press [B] to go to next step.
6
7
8
MONTH DAY
1 0
YEAR
/
0 2 MON 2 0 0 6
• If the clock is not set, the “CLOCK SET” screen appears when you press
[MENU]. In this case, press [MENU] again.
HOUR MINUTE AM/PM
0 5
:
4 0
– –
or
CHANNEL SET UP
Select “MANUAL SET UP”.
Then press [B] to go to next step.
2
3
4
5
AUTO SET UP
B MANUAL SET UP
CLOCK SET
Select “AM” or “PM”.
MONTH DAY
1 0
YEAR
or
/
0 2 MON 2 0 0 6
or
HOUR MINUTE AM/PM
0 5
:
4 0
P M AM
B PM
MANUAL SET UP
Select the channel to be added or deleted.
CHANNEL ꢀ0 (CATV)
ADD
To exit the CLOCK SET screen
or
MANUAL SET UP
Select “ADD” or “DELETE”.
CHANNEL ꢀ0 (CATV)
Hint
DELETE
or
• To go back one step, press [s] (during steps 2 to 7).
• Your clock setting will be lost if either there is a power failure or this unit has
been unplugged for more than ꢀ0 seconds.
CLEAR/
C. RESET
To exit the menu
–
–
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Function Overview
Front Panel Indicator
Lights up when the disc is inserted.
Lights up when this unit
Lights up when the inserted
disc is being played back.
Blinks when an unacceptable
disc is inserted.
Lights up during a recording.
Blinks when a recording is paused.
is in the DVD mode.
STANDBY-ON
OPEN/CLOSE
POWER ON
REC
F.FWD STOP/EJECT PLAY
TIMER REC
RECORD
VCR
DVD
DISC IN PLAY
STOP PLAY NEXT
REW
CHANNEL
SOURCE
PREV
VIDEO
AUDIO
IR
Lights up when this unit is in the VCR mode.
Lights up when power is on.
Lights up when the Timer Recording
or an OTR recording has been set.
VCR / DVD Switching
You must select which component you wish to operate with
[SOURCE] at first, as this product is a combination of a VCR
and a DVD player.
OPEN/CLOSE
/EJECT
OPEN/CLOSE
STANDBY-ON
SPEED
AUDIO
VCR
DVD
DISC IN PLAY
STOP PLAY NEXT
1
4
7
2
5
8
3
6
9
CHANNEL
SOURCE
REV
SKIP/CH.
VCR/TV
SLOW
VCR MODE
Press [VCR] on the remote control.
(Verify that the VCR OUTPUT light is lit.)
0
VCR
+10
DVD
VCR button
DVD button
DISPLAY
PAUSE
PLAY
STOP
DVD MODE
RECORD
MENU
Press [DVD] on the remote control.
VCR
DVD
ENTER
(Verify that the DVD OUTPUT light is lit.)
DVD OUTPUT
light
SETUP TOP MENU
RETURN
SOURCE
SEARCH
MODE
CLEAR/
C. RESET
MODE
ZOOM
SUBTITLE
T-SET
Hint
ANGLE
REPEAT
A-B
SOURCE button
• Pressing only [SOURCE] on the front panel DOES NOT switch the mode of the
remote control. You MUST select the correct mode on the remote control.
VCR OUTPUT light
Front & Rear Terminals
POWER ON
2
3
DVD/VCR
VCR
REC
TIMER REC
DVD
ANT-IN
COMPONENT
VIDEO OUT
AUDIO OUT
DIGITAL
AUDIO S-VIDEO
I
VCR
REW
F.FWD STOP/EJECT PLAY
RECORD
VIDEO
AUDIO
OUT
OUT
AUDIO OUT
ANT-IN
Y
L
4
IN
AUDIO IN
VIDEO IN
L
I
DEO IN
ANT-OUT
R
1
10
9
C
B
R
ANT-OUT
COAXIAL
VIDEO OUT
R
C
6
3
[Front Panel]
[Rear Panel]
8 7
6
5
6: VIDEO IN jack
1: DVD AUDIO OUT (analog) jacks
Connect a cable coming from the video out jack of a camcorder, another VCR or
an audio-visual source (laser disc player, video disc player, etc.) here.
Connect the supplied audio cable here through the audio in jacks of a television
or other audio equipment. (DVD only)
7: DVD/VCR VIDEO OUT jack
2: DVD/VCR AUDIO OUT jacks
Connect the supplied video cable here through the video in jack of a television.
8: COMPONENT VIDEO OUT jacks
Connect optional COMPONENT VIDEO cables here through the COMPONENT
VIDEO in jacks of a television. (DVD only)
9: S-VIDEO OUT jack
Connect the supplied audio cable here through the audio in jacks of a television
or other audio equipment.
3: AUDIO IN jack
Connect audio cable coming from the audio out jack of a camcorder, another
VCR or an audio source here.
4: ANT-IN jack
Connect your antenna or cable box here.
Connect an optional S-VIDEO cable here through the S-VIDEO in jack of a tel-
evision. (DVD only)
10: DIGITAL AUDIO OUT COAXIAL jack
5: ANT-OUT jack
Connect an optional coaxial digital audio cable here through the coaxial digital
audio in jack of a decoder or audio receiver. (DVD only)
Connect the supplied RF cable to the antenna input jack of a television.
–
–
9
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
DVD mode
VCR mode
Disc/Tape
OPEN/CLOSE
/EJECT
Button
STANDBY-ON
SPEED
AUDIO
(Alphabetical order)
1
4
7
2
5
8
0
3
6
•To select channel.
•The +10 button has no
effect in VCR mode.
1
4
7
2
5
8
3
6
9
•To select chapter or title
•To select track directly.
SKIP/CH.
9
directly.
+10
VCR/TV
SLOW
•
•
To search forward/backward
through a disc.
To begin slow forward/reverse through a disc.
playback in the pause mode.
•To search forward/backward
0
VCR
+10
DVD
•To forward/backward a tape.
DISPLAY
PAUSE
A-B
•To repeat between your
chosen point A and B.
•
To repeat between your cho-
sen point A and B.
PLAY
ANGLE
AUDIO
STOP
•To select camera angles on
a disc.
RECORD
MENU
•To select audio languages
on a disc.
•To select STEREO,
L-ch or R-ch.
ENTER
SETUP TOP MENU
RETURN
•
To clear the markers.
•To clear the markers.
•To clear the numbers
entered incorrectly.
•To cancel the point for A-B
repeat.
•To remove status number in
program input.
•To clear the numbers
entered incorrectly.
•To cancel the point for A-B
repeat.
SEARCH
MODE
CLEAR/
MODE
ZOOM
C. RESET
CLEAR/
C. RESET
•To exit the VCR Menu.
SUBTITLE
T-SET
ANGLE
REPEAT
A-B
•To reset the tape counter.
DISPLAY
•To display the current disc
mode.
•To display the current disc
mode.
•To display the current time,
tape counter, and channel.
•
To select the DVD output mode.
•
To select the DVD output mode.
DVD
•To activate the remote
control in DVD mode.
•To activate the remote
control in DVD mode.
•
•
•
To select an item
on the VCR Menu.
To advance to the
next VCR Menu.
To go back one
step during clock
and timer setting.
ENTER
•To move the cursor and
determine its position.
•To move the cursor and
determine its position.
Installing the Batteries for
the Remote Control
MENU
Install two AA batteries (supplied)
matching the polarity indicated inside
battery compartment of the remote
control.
•
To call up the Menu on a disc.
•To call up the VCR Menu.
•To set black level on/off.
•To set virtual surround
on/off.
•To arrange the playing order
or play randomly.
MODE
•
To set virtual surround on/off.
OPEN/CLOSE
/EJECT
•To open or close the disc
tray.
•To open or close the disc
tray.
•To eject the video
cassette from the VCR.
1
2
3
•To pause tape playback or
recording.
•To advance playback one
frame at a time.
•To pause disc playback.
•To advance playback one
frame at a time.
PAUSE
•To pause disc playback.
•To begin disc playback.
•To begin disc playback.
•To begin tape playback.
PLAY
RECORD
•To start a recording or One
Touch Recording.
Keep in mind the following when using
the remote control:
REPEAT
•To play a chapter or title
repeatedly.
•To play a track or disc
repeatedly.
•
Make sure that there is no obstacle
between the remote control and the
remote sensor on the unit.
RETURN
•To return to the previous
operation in menu.
•To return to the previous
operation in menu.
SEARCH
MODE
•To search chapter, title or
time.
•To search track.
•To search time.
• The maximum operable ranges from
the unit are as follows.
- Line of sight: approx. 2ꢀ feet (7m)
- Either side of center:
approx. 16 feet (5m) within ꢀ0°
- Above: approx. 16 feet (5m) within 15°
- Below: approx. 10 feet (ꢀm) within ꢀ0°
•To call up the index or time
search menu.
•
To set or search the markers.
•
To set or search the markers.
SETUP
•To call up the DVD setup
menu.
•To call up the DVD setup
menu.
•To change channels.
•To adjust the tracking
manually during playback.
SKIP/CH.
SKIP/CH.
•To skip chapters or titles.
•To skip tracks.
SLOW
• To view the tape in slow
motion.
SPEED
•To select the recording
speed.
STANDBY-ON
•To turn the unit on/off.
•To turn the unit on/off.
•To stop playback.
•To turn the unit on/off.
•To stop playback or
recording.
STOP
•To stop playback.
SUBTITLE
T-SET
•
To put the VCR into standby
mode for a Timer Recording.
•To select subtitles on a disc.
Hint
TOP MENU
•To call up the Top Menu on
a disc.
• Do not mix alkaline and manganese bat-
teries.
• Do not mix old and new batteries.
•
To select the VCR output mode.
VCR
•To activate the remote
control in VCR mode.
VCR/TV
•To select DVD position or
TV position.
•To select CD position or TV •To select VCR position or
position. TV position.
ZOOM
•To magnify part of a picture.
(x2/x4)
–
–
Download from Www.Somanuals.com1. 0All Manuals Search And Download.
EN
VCR Functions
Playback
Before:
Turn on the TV and set it to channel ꢀ.
• If channel ꢀ has been already occupied for broadcasting, see “RF Output Channel” section on page 6.
VCR
Hint
4
1
• When a tape with-
out record tab is
inserted, the unit
will start playback
automatically.
1 Insert a video cas-
2
4
To start playback
OPEN/CLOSE
/EJECT
STANDBY-ON
SPEED
AUDIO
sette into this unit.
STANDBY-ON
POWER ON
1
4
7
2
5
8
3
6
9
PLAY
SKIP/CH.
• Tracking will be
automatically
REC
TIMER REC
RECORD
VCR/TV
SLOW
REW
F.FWD STOP/EJECT PLAY
VIDEO
AUDIO
IR
adjusted upon play-
back. To adjust the
tracking manually,
press [SKIP/CH.
G/K, H/L] (or
0
VCR
+10
DVD
DISPLAY
PAUSE
3
To stop playback
To eject the cassette
OPEN/CLOSE
/EJECT
STOP
PLAY
3 2
4
2
STOP
[
CHANNEL
K/L]).
3
Other Operations
To cue or review picture during playback (Picture Search)
Counter Reset
Press [CLEAR/C.RESET].
To play back in slow motion (Slow mode)
Press [SLOW] during playback or the still mode.
• If the noise bars appear on the TV screen, you can reduce it
Use [g] or [h ]([F.FWD g] or [REW h]).
• Press it again and the unit will search in super high speed.
(in the SLP mode only)
To freeze the picture on TV screen during playback (Still mode)
Press [PAUSE F]. Each time you press the button, the pic-
ture will be forwarded by one frame.
by using [SKIP/CH. G/K, H/L] (or [CHANNEL
K/L]).
Auto Rewind
•
If the picture begins to vibrate vertically in the still mode,
stabilize the picture by using [SKIP/CH. G/K, H/L] (or
When a tape reaches its end during playback, fast-forward
or recording (except Timer Recording and One Touch
Recording), the tape will automatically rewind to the beginning.
After rewinding finishes, the unit will eject the tape.
[
CHANNEL
K/L]).
• If the picture is distorted or rolling vertically, adjust the verti-
cal hold control on your TV if equipped.
Hint
• Still/Slow mode will be automatically cancelled after 5 minutes to prevent damage to the tape and the video head.
• To return to playback from the Picture Search/Still/Slow mode, press [PLAY B].
Index Search
Time Search
You can skip the program backward and forward by the Index
Mark.
You can search backward and forward a specific length of
time on a tape.
VCR
VCR
• Insert a tape into this unit.
• Insert a tape into this unit.
Press [SEARCH MODE] once.
Press [SEARCH MODE] twice.
1
1
SEARCH
SEARCH
MODE
MODE
TIME SEARCH
INDEX SEARCH
– : – –
– –
Select the desired length of time for fast forwarding or
To select Index Mark
2
2
rewinding.
INDEX SEARCH
0 ꢀ
TIME SEARCH
2 : 5 0
or
01 ~ 20
or
CURRENT PROGRAM
0:01~ 9:59
Beginning
of the tape
End of
the tape
(1 minute~9 hours and 59 minutes)
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5
02
01
01
02
03
To rewind
3
INDEX MARK
ss
To rewind
3
4
ss
To fast forward
BB
To fast forward
BB
After searching, it automatically starts playback.
4
PLAYB
After searching, it automatically
starts playback.
PLAYB
Hint for Index Search & Time Search
• These functions are not available during recording.
• Press [STOP C] to stop the search.
• If a tape ends during a search, your search will be cancelled and the tape will
rewind to the beginning.
Hint
• The Index Mark will be made automatically at the beginning of each recording.
• The time gap between Index Marks should be greater then 1 minute for SP
mode, 2 minutes for LP mode and ꢀ minutes for SLP mode.
–
–
11
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Repeat
This function will playback a tape repeatedly from the beginning when the tape reaches the end.
VCR
Press [B] to set
“AUTO REPEAT”, “ON” or “OFF”.
- M E N U -
- M E N U -
Press [MENU], and choose
“AUTO REPEAT” during playback.
2
1
TIMER PROGRAMMING
TIMER PROGRAMMING
B AUTO REPEAT
CHANNEL SET UP
CLOCK SET
[OFF]
B AUTO REPEAT
[ON]
CHANNEL SET UP
CLOCK SET
MENU
LANGUAGE SELECT
LANGUAGE SELECT
or
Hint
• To cancel Auto Repeat, follow step 1 above. Then, press [B] so that “OFF” appears beside “AUTO REPEAT”. Press [CLEAR/C.RESET] to exit.
• If menu remains on the TV screen after step 2, press [CLEAR/C.RESET] to exit.
• The Auto Repeat playback will start automatically if you select “AUTO REPEAT” to “ON” in the stop mode.
Recording
Recording & OTR (One Touch Recording)
Before: Turn on the TV and set it to channel ꢀ.
• If channel ꢀ has been already occupied for broadcasting,
see “RF Output Channel” section on page 6.
3
6
1
2
OPEN/CLOSE
/EJECT
STANDBY-ON
POWER ON
OPEN/CLOSE
STANDBY-ON
SPEED
AUDIO
VCR
1
4
7
2
5
8
3
6
9
REC
F.FWD STOP/EJECT PLAY
TIMER REC
RECORD
VCR
DVD
DISC
STOP
SKIP/CH.
REW
CHANNEL
SOURCE
PREV
VIDEO
AUDIO
IR
1
3
Insert a cassette with 2 Select the channel
tab into this unit. to record.
VCR/TV
SLOW
2
1
4
7
2
5
8
0
3
6
9
0
VCR
+10
DVD
DISPLAY
PAUSE
SKIP/CH.
or
5 6 4
Accidental erasure prevention
To prevent accidental recording on a recorded
cassette, remove its record tab. To record on
it later, cover the hole with adhesive tape.
PLAY
STOP
5
4
RECORD
MENU
Press [SPEED] to select the desired tape speed.
ENTER
SPEED
SETUP TOP MENU
RETURN
Record tab
Tape Speed
Type of tape
SP mode
Recording/Playback Time
T60
T120
2hours
6hours
T160
1hour
3hours
2-2/3hours
8hours
SP
You CAN NOT dub a DVD to a videotape.
SLP mode
To stop recording temporarily (Pause mode)
Press [PAUSE F].
4 Press [RECORD] repeatedly to select the
desired recording length.
• During the rec-pause mode, five
C
marks appear on the TV screen. Each
C
RECORD
mark represents one minute.
• Press it again to resume recording.
REC
OTR(0:30)
OTR(1:00).....
(Normal recording)
REC
OTR(8:00)
OTR(7:30)
• Pause mode will be automatically cancelled after 5 minutes to prevent damage
to the tape and the video head.
5 To stop recording
6 To eject the
Hint
recorded cassette
OPEN/CLOSE
/EJECT
• If you want to watch one channel while recording another...
1) Press [VCR/TV] to put the unit in TV position.
STOP
2) Select a channel you want to watch with the cable box or the satellite box.
Timer Recording
VCR
Select the desired date.
Then press [B] to go to next step.
•
Insert a tape with its record tab into the unit.
4
5
Press [MENU], then select “TIMER PROGRAMMING”.
ONE TIME PROGRAM
PROGRAM NUMBER
1
or
- M E N U -
TIMER PROGRAMMING
1
DATE
1 0 / 2 ꢀ MON
B TIMER PROGRAMMING
PROG
DATE
START TIME
END TIME
CHANNEL
REC SPEED
12ꢀ45678
MENU
START TIME – – : – – – –
END TIME – – : – – – –
AUTO REPEAT
CHANNEL SET UP
CLOCK SET
[OFF]
CHANNEL
– –
LANGUAGE SELECT
REC SPEED – –
or
Available program number flashes.
• You can set a program one year in advance.
Select an empty program number.
Then press [B] to go to next step.
PROGRAM NUMBER
DATE – – / – –
1
2
3
Select the desired start time (hour).
Then press [B] to go to next step.
START TIME – – : – – – –
END TIME – – : – – – –
CHANNEL
– –
REC SPEED – –
or
ONE TIME PROGRAM
PROGRAM NUMBER
or
1
DATE
1 0 / 2 ꢀ MON
START TIME 0 7 : ꢀ 0 – –
END TIME – – : – – – –
Select “ONCE”, “DAILY” (Mon-Fri), or “WEEKLY”.
CHANNEL
– –
PROGRAM NUMBER
1
Then press [B] to go to next step.
REC SPEED – –
B
ONCE
DAILY
WEEKLY
or
or
–
–
Download from Www.Somanuals.com1. 2All Manuals Search And Download.
EN
Select “AM” or “PM”.
Then press [B] to go to next step.
Press [SUBTITLE/T-SET] to set timer standby mode.
6
10
SUBTITLE
ONE TIME PROGRAM
PROGRAM NUMBER
T-SET
1
DATE
1 0 / 2 ꢀ MON
START TIME 0 7 : ꢀ 0 PM
END TIME – – : – – – –
or
CHANNEL
– –
• TIMER REC indicator on the front panel lights up. The unit will change
to the DVD mode.
REC SPEED – –
AM
B PM
Hint
Repeat the procedure in steps 5 and 6 to set the end time.
• To go back one step, press [s] during steps ꢀ to 9.
7
8
To Check, Correct or Cancel a Timer Program
1) Press [SUBTITLE/T-SET] then, [VCR] on the remote
Select the desired channel.
Then press [B] to go to next step.
ONE TIME PROGRAM
control.
PROGRAM NUMBER
1
2) Select main menu by pressing [MENU]
ꢀ) Select “TIMER PROGRAMMING” by using [K/L], then
press [B].
.
DATE 1 0 / 2 ꢀ MON
START TIME 0 7 : ꢀ 0 PM
END TIME 0 8 : ꢀ 0 PM
or
CHANNEL
1 6
REC SPEED – –
4) Select the program number which you want to check by
using [K/L]. The details of the program you selected will
appear on the TV screen.
• If you have connected the unit to a cable box or satel-
lite box as the connection on page 6, select the VCR to
channel 3 or 4 (the RF output channel of the VCR). Then,
select the desired channel at the cable box or satellite box.
Leave the cable box or satellite box on for Timer Recording.
• Go to the digit you want to change by using [s/B].
Then, enter correct numbers by using [K/L].
• You may cancel the entire program by pressing [s]
while the program number blinks.
Select the desired recording speed, then press
9
5) Press [CLEAR/C.RESET] to exit.
[CLEAR/C.RESET].
ONE TIME PROGRAM
6) Press [SUBTITLE/T-SET] to return to timer standby
mode.
PROGRAM NUMBER
DATE
1
CLEAR/
C. RESET
1 0 / 2 ꢀ MON
START TIME 0 7 : ꢀ 0 PM
END TIME 0 8 : ꢀ 0 PM
or
CHANNEL
1 6
REC SPEED SP
To cancel a Timer Recording in progress
B SP
SLP
Press [STOP/EJECT
C
A] on the unit.
• To set another program after step 9, press [
B].
Then, continue with step 2.
Hints for OTR and Timer Recording
• Press [VCR] on the remote control before you set Timer Recording. Make sure the remote control is in the VCR
mode, then press [SUBTITLE/T-SET].
• If a tape is not in the unit or does not have the record tab, TIMER REC indicator on the front panel blinks and Timer
Recording cannot be performed. Please insert a recordable tape.
• When Timer Recordings are set, TIMER REC indicator on the front panel lights up. To use the VCR as usual until the time
for the recording, press [SUBTITLE/T-SET] so that TIMER REC indicator lights off. Press [VCR/TV] to choose the VCR
position. Select either VCR or DVD mode, then continue with the other features as described in this manual.
After an OTR or a Timer Recording has been set, this unit operates as follows:
• If a tape runs out before an OTR or a Timer Recording is finished, the unit ejects the tape, and switches to the DVD mode
automatically. If the DVD power is off, the unit does not switch to the DVD mode but goes into the timer standby mode.
Press [SUBTITLE/T-SET] on the remote control or [STOP/EJECT
C
A] on the unit, then press [VCR] to activate the VCR
function again.
• Once the unit turns to the timer standby mode, no VCR functions are available until [SUBTITLE/T-SET] is pressed.
([SOURCE] on the front panel and [VCR] on the remote control will not function.)
• To cancel the timer standby mode, press [SUBTITLE/T-SET] on the remote control or [STOP/EJECT
C
A] on the unit, then
press [VCR] to activate the VCR function again.
• The mode of the unit and the remote control may differ (VCR mode or DVD mode) when you set Timer Recording or after
you cancelled Timer Recording. Press [VCR] or [DVD] on the remote control to select your desired mode before you
operate.
When an OTR or a Timer Recording is completed...
• If Auto Power Off for DVD has been activated and there are Timer Recordings on standby, the unit turns off automatically,
and TIMER REC indicator on the front panel lights to indicate the unit is in the timer standby mode.
• TIMER REC indicator on the front panel flashes if there are no more Timer Recordings on standby.
• If Auto Power Off for DVD has NOT been activated, the unit switches to the DVD mode and all the VCR functions will be
unavailable. All the DVD functions are available during OTR, timer standby mode and Timer Recording.
If you want to use the DVD player during a Timer Recording or while TIMER REC indicator on the front panel is on or blinking.
• Press [STANDBY-ON] to turn on the unit. Press [DVD] on the remote control to choose DVD mode, then continue with the
other DVD features as described in this manual.
NOTE (for Timer Recording) :
• If there is a power failure or the unit is unplugged for more than ꢀ0 seconds, clock and all timer settings will be lost.
–
–
1ꢀ
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying a Video Tape
Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws.
(Back of TV)
(Back of another source)
(Back of DVD/VCR*)
DVD/VCR
AUDIO OUT
VCR
2
AUDIO OUT
1
or
ANT-IN
L
Connect
AUDIO IN
VIDEO IN
Connect
R
VIDEO OUT
VIDEO OUT
ANT-OUT
RF cable
(supplied)
*Front input jacks are also available
Audio/Video cables
(commercially available)
7) To stop recording, press [STOP/EJECT
C
A] on the
1) Insert a pre-recorded tape into another VCR for playing.
recording unit, then stop playback of the tape in another
source.
2) Insert a tape with its record tab into this unit for recording.
ꢀ) Press [SPEED] on the remote control of the recording
unit to select the desired recording speed (SP/SLP).
4) Select the “L1” or “L2” position on the recording unit.
Hint
• For best results during dubbing, use the front panel controls whenever pos-
sible. The remote control might affect another source’s operation.
• To use the input jacks on the back of this unit, select
“L1” position by pressing [0], [0], [1] on the remote
• Always use video-quality shielded cables with RCA-type connectors. Standard
audio cables are not recommended.
control or [CHANNEL
K
/
L]
on this unit.
• To use the input jacks on the front of this unit, select
• You can use a video disc player, satellite receiver or other audio/video
component with Audio / Video outputs.
• “L1” or “L2” is found before the lowest memorized channel. (Example: CH02)
• “L2” input jacks are on the front of this unit.
“L2” position by pressing [0], [0], [2] on the remote
control or [CHANNEL
K/L] on this unit.
5) Press [RECORD] on the recording unit.
6) Begin playback of the tape in another source.
–
–
Download from Www.Somanuals.com1. 4All Manuals Search And Download.
EN
DVD Functions
Playback
Before: Turn on the TV, amplifier and
any other components which are
connected to this unit. Make sure the
TV and audio receiver (commercially
available) are set to the correct channel.
DVD
2
OPEN/CLOSE
STANDBY-ON
/EJECT
SPEED
AUDIO
1
1
1
4
7
2
5
8
3
6
9
STANDBY-ON
POWER ON
OPEN/CLOSE
SKIP/CH.
VCR/TV
SLOW
REC
F.FWD STOP/EJECT PLAY
TIMER REC
RECORD
VCR
DVD
DISC IN PLAY
STOP PLAY NEXT
REW
CHANNEL
SOURCE
PREV
VIDEO
AUDIO
IR
0
VCR
+10
DVD
DISPLAY
PAUSE
Insert a disc with
1
3
2
4
label facing up.
3
4
PLAY
OPEN/CLOSE
/EJECT
STANDBY-ON
STOP
1
1
4 3
Hint
• A “prohibited icon” may appear at the top-right on the TV screen when the operation is prohibited
by the disc or this unit.
To start
playback
To stop
playback
• Some DVDs may be played from title 2 or ꢀ due to specific programs.
• During the playback of a two-layered disc, pictures may stop for a moment. This happens while the 1st
layer is being switched to the 2nd layer. This is not a malfunction.
STOP
PLAY
TIP:
You can change the on-screen language for DVD function in “PLAYER MENU” setting. (Refer to page 20.)
DVD menu
Fast Forward / Reverse Search
DVD
Some discs contain menus which allow you to customize
DVD playback. Press [K / L / s / B ] to select an item, then
press [ENTER] (or [PLAY B]).
E
1
Press [h] or [g] repeatedly during playback
to select the required forward or reverse speed.
To continue playback, press [PLAY B].
Calling up a Menu Screen during Playback
• Press [MENU] to call up the DVD menu.
• Press [TOP MENU] to call up the title menu.
To use [PREV j ], [i NEXT] on this unit
Press and hold to change forward or reverse playback speed.
To continue playback, press [PLAY B].
Hint
Hint
• Menu operations may vary depending on the disc. Refer to the manual
accompanying the disc for details.
• For DVDs, fast forward or reverse search speed is different depending on the
disc. Approximate speed is 1(x2), 2(x8), ꢀ(x20), 4(x50), 5(x100).
• For Audio CDs, approximate speed is 1(x2), 2(x8), ꢀ(xꢀ0).
Resume
DVD
Slow Forward / Reverse
DVD
1
Press [STOP C] during playback.
Press [h] or [g] repeatedly in the pause mode
to select the required forward or reverse speed.
To continue playback, press [PLAY B].
Resume message will appear on
Resume ON
the TV screen.
Press [PLAY B], playback will
resume from the point at which
playback was stopped.
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
To use [PREV j ], [i NEXT] on this unit
Press and hold in the pause mode to change forward or
reverse playback speed.
To continue playback, press [PLAY B].
Hint
• To cancel resume, press [STOP C] one more time in the stop mode.
Hint
• The resume information stays on even when the power is turned off.
• Slow forward or reverse speed is different depending on the disc. Approximate
speed is 1(1/16), 2(1/8), ꢀ(1/2).
Paused and Step-by-Step Playback
• Set “STILL MODE” to “FIELD” in the DISPLAY menu if pictures in the slow
playback mode are blurred. (Refer to pages 20-21.)
DVD
Zoom
Press [PAUSE F] during playback.
DVD
To continue playback, press [PLAY B].
DVD
1) Press [ZOOM] during playback.
2) Press [ZOOM] repeatedly to select the required zoom
factor: x2, x4 or OFF.
The disc goes forward by one frame each time [PAUSE F] is
pressed in the pause mode.
x2
x4
To continue playback, press [PLAY B].
Hint
ꢀ) Press [K / L / s / B] to slide the zoomed picture across
the screen.
• On DVDs, set “STILL MODE” to “FIELD” in the DISPLAY menu if pictures in the
pause mode are blurred. (Refer to pages 20-21.)
4) To exit zoom mode, press [ZOOM] to select OFF.
To use [PREV j ], [i NEXT] on this unit
Press once to skip a chapter or track to a desired point.
Hint
• Zooming function does not work while the disc menu is showing up.
• x4 zoom is not available on some discs.
• The picture may be distorted when you press [PAUSE k] or [h] repeatedly
in the zoom mode.
• It may take several seconds to slide the zoomed picture
.
–
–
15
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display
You can check the information about the current disc by pressing [DISPLAY] on the remote control.
DVD
DVD
Angle icon appears only in a case
multi-angel is available on the DVD.
DISPLAY
DISPLAY
Current playback status
Current playback status
4/12 0:03:21 - 0:02:15
T
11/16 0:00:00 - 0:03:30
1
2
3
1
2
Remaining time of the current track
Elapsed time of the current track
Remaining time of the current chapter
Elapsed time of the current chapter
TR(Track):
CH(Chapter):
Current chapter number / Total chapters
Current track number / Total tracks
DISPLAY
DISPLAY
ALL:
Current track number / Total tracks
4/12 0:13:45 - 0:45:40
T
1/3 0:00:00 - 1:23:45
Current repeat setting appears only
when the repeat setting is active.
T: Track repeat
Remaining time of the current title
Elapsed time of the current title
A: All Tracks repeat
B: A-B repeat
TT(Title):
Current title number / Total titles
A
DISPLAY
Remaining time of the entire disc
Elapsed time of the entire disc
Layer numbers, appears only when
playing a two-layered disc.
L0: Layer 0 is playing
DISPLAY
T
L1
L1: Layer 1 is playing
3
Current repeat setting appears only
when the repeat setting is active.
C: Chapter repeat
Hint
T: Title repeat
• When you are playing a disc in PROGRAM or RANDOM mode,
A
B: A-B repeat
2
PROGRAM (or RANDOM) will be displayed instead of
.
BIT RATE: The amount of audio and
video data currently being read
DISPLAY
4
–
–
Download from Www.Somanuals.com1. 6All Manuals Search And Download.
EN
Search Functions
SEARCH MODE does not work during Programmed or Random Playback.
Using Track Search
Using Time Search
DVD
DVD
Press [SEARCH MODE].
Press [SEARCH MODE] repeatedly until the Time Search
1
1
2
display appears.
SEARCH
MODE
SEARCH
MODE
/29
TOTAL 1:29:00
PLAY
Select a desired disc time by using the Number buttons within ꢀ0
Select track number by using the Number buttons within ꢀ0 seconds.
2
seconds.
1
4
7
2
5
8
0
3
6
9
1
4
7
2
5
8
0
3
6
TOTAL 1:29:00
/29
9
+10
• For the disc with less than 10 tracks, press the track number directly.
Hint
• For discs with more than 10 but less than 99 tracks, to play single-digit track,
press [0] first, then the track number (e.g. for track ꢀ, press [0], [3]). To play a
double-digit track, press the track number.
• For discs with more than 100 tracks, to play a single or a double-digit track,
press [0] first, then the track number (e.g. for track ꢀ, press [0], [0], [3], and for
track 26, press [0], [2], [6]). To play a triple-digit track, press the track number.
• When there is no need to enter a number, “0” appears automatically.
For example, “0: 0_: _ _” appears in the Time Search display if the total time of
the title or track is less than 10 minutes.
• Press [CLEAR/C.RESET] to erase the incorrect input at step 2.
Marker Setup
Using [SKIP/CH. G/o, H/p]
DVD
Press [SKIP/CH. G/o, H/p] during playback.
1
Current Track
(TR)
This feature allows you to assign a specific point on a disc to be
called back later.
SKIP/CH.
TR 1 TR 2 TR ꢀ TR 4
PLAY
To set a marker
SKIP
SKIP
Press [SEARCH MODE] repeatedly until the marker display
appears.
1
Hint
• [+10] can also bring the Track search display, except for the disc with less than
10 tracks. For such a disc, track search can be done by just pressing the track
number.
SEARCH
MODE
PLAY
Select a marker.
2
Using Title / Chapter Search
or
DVD
Press [ENTER].
3
Press [SEARCH MODE] once for the Chapter Search.
Press [SEARCH MODE] twice for the Title Search.
1
ENTER
SEARCH
MODE
/12
PLAY
To return to the marker later
Press [SEARCH MODE] repeatedly until the marker display
1
appears.
SEARCH
MODE
Select title/chapter number by using the Number buttons
within ꢀ0 seconds.
2
1
4
7
2
5
8
0
3
6
/12
Select the marker.
9
2
or
+10
Using [SKIP/CH. G/o, H/p]
Press [ENTER] at the desired marker.
3
ENTER
Press [SKIP/CH. G/o, H/p] during playback.
1
Current Chapter
(CH)
CH 1 CH 2 CH ꢀ CH 4
SKIP/CH.
To exit the marker screen
PLAY
SKIP
SKIP
or
RETURN
Press [RETURN ].
1
Current Title
(TT)
TT 1 TT2 TTꢀ TT4
Hint
SKIP
SKIP
• The Marker display will disappear in about ꢀ0 seconds when there is no output.
(If the disc has no chapters)
• To clear a marker, select the marker to be cleared at step 2 in the section
“To set a marker” or “To return to the marker later” and then press
[CLEAR/C.RESET].
Hint
• Depending on the disc being played, this function can also be performed by
directly entering the desired chapter number with the Number buttons. Refer
to the manual accompanying the disc.
• Opening the disc tray or turning off the power will erase all markers.
• Selecting “AC” at step 2 in the section “To set a marker” or “To return to the
marker later” will also erase all markers.
–
–
17
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat / Random / Programmed Playback
Repeat Playback
Random Playback
DVD
DVD
Repeat function is available only during playback.
This function shuffles the playing order of tracks instead
of playback in the sequence.
Press [REPEAT] during playbck.
1
Press [MODE] twice.
RANDOM
1
CD-DA
TOTAL 0:45:55
REPEAT
MODE
RANDOM PROGRAM
--no indication--
PLAY
STOP
PLAY
<Example : DVD>
Each time you press [REPEAT] repeat function changes as
example below.
Press [PLAY B] to start Random Playback.
2
(repeat off)
OFF
PLAY
(current chapter repeat)
(current title repeat)
(repeat off)
CHAPTER
TITLE
OFF
Hint
• To repeat the current track in the random selections, press [REPEAT] repeat-
edly until “ TRACK” appears during playback.
• To repeat the entire random selections, press [REPEAT] repeatedly until
ALL” appears during playback.
“
• During random playback, you cannot go back to the previous track.
(current track repeat)
(entire disc repeat)
TRACK
ALL
Programmed Playback
DVD
Hint
• Repeat setting will be cleared when moving to another title, chapter or track.
• Repeat playback are not available with some discs or during repeat A-B playback.
You may determine the order in which tracks will play.
Press [MODE] once.
1
CD-DA
TOTAL 0:00:00
MODE
STOP
Repeat A-B Playback
DVD
Using [K/L] to select desired track.
Press [ENTER].
2
3
Repeat function is available only during playback.
CD-DA
TOTAL 1:03:30
1
5
3:30
5:10
ENTER
10 4:20
11 3:00
12 3:20
17 4:10
22 2:50
2/3
Press [A-B] at your desired starting point (A).
1
or
A-
A-B
PLAY
• Up to 99 tracks can be ordered.
•
If eight or more tracks were in a program, use [SKIP/CH. G///K , H //L]
to see all the tracks.
Press [A-B] at your desired ending point (B).
Press [PLAY B] to start Programmed Playback.
2
A-B
A-B
PLAY
• Point B should be in the same title or track as point A.
Hint
Hint
• Press [CLEAR/C.RESET] at step 2 to erase the most recently entered track.
• To erase all programmed tracks at once, select “ALL CLEAR’’ and press
[ENTER] at step 2.
• To exit the sequence, press [A-B] so that “OFF” appears.
• To cancel point A, press [CLEAR/C.RESET] at step 1.
• This function does not work in the other repeat modes.
• While a program is being played back, [STOP C] works as follows;
⇒
Press [STOP C] and [PLAY B] next, so that the programmed playback
restarts. Playback restarts from the current point.
⇒
Press [STOP C] twice and [PLAY B] next, so that playback restarts from
the first track in the original order. However, your programmed playback can
be restarted when you follow the above steps. (Your programs are still stored
until either the disc tray is open or power is turned off.)
• To repeat the current track in the program, press [REPEAT] repeatedly until
appears during playback.
“
TRACK’’
• To repeat the entire program, press [REPEAT] repeatedly until “
appears during playback.
ALL’’
–
–
Download from Www.Somanuals.com1. 8All Manuals Search And Download.
EN
Special Settings
Subtitle Language
Camera Angle
DVD
DVD
This unit allows you to select a subtitle language (if available)
during DVD playback.
Some DVD discs may contain scenes which have
been shot simultaneously from various angles.
You can change the camera angle if the angle
icon appears on the screen. If the “ANGLE ICON”
setting is “OFF” in the OTHERS menu, the angle icon will not
appear. (Refer to pages 20-22.)
Press [SUBTITLE/T-SET] during playback.
1
SUBTITLE
1.ENG/6
T-SET
PLAY
Press [ANGLE] during playback.
1 / 8
1
Each time you press [SUBTITLE/T-SET], subtitle language
changes as example below.
ANGLE
PLAY
OFF
ENG
FRE
(no subtitles)
Black Level Setting
(English subtitles)
(French subtitles)
DVD
Adjust the Black Level Setting to make
the dark areas of the TV picture brighter.
Press [MODE] during playback.
1
ON
MODE
To set subtitle ON/OFF
PLAY
Press [SUBTITLE/T-SET] during playback.
1
ENTER
Press [ENTER] to
adjust the black level.
SUBTITLE
T-SET
OFF
2
3
1.ENG/6
PLAY
ON: Makes the dark areas brighter.
OFF: Shows the original picture as recorded.
Press [B] to select subtitle ON or OFF.
2
Press [RETURN
] to exit.
RETURN
OFF
Stereo Sound Mode
Hint
• If your language is not shown after pressing [SUBTITLE/T-SET] several times,
the disc may not have that language. However, some discs allow subtitle lan-
guage setting on the disc menu. (Operation varies depending on the discs, so
refer to the manual along with the disc.)
DVD
This unit allows you to select a sound
mode during CD playback.
Press [AUDIO] during CD playback.
• When “NOT AVAILABLE” appears on the TV screen, it means no subtitle is
recorded on the scene.
• If you choose a language that has a three- letter-language code, the code will
be displayed every time you change the subtitle language setting. If you choose
any other languages, ‘---’ will be displayed instead. (Refer to page 24.)
1
STEREO
AUDIO
PLAY
• Some discs will only allow you to change the subtitle from the disc menu. Refer
to the manual accompanying the discs for details.
Each time you press [AUDIO], sound mode changes as example below.
STEREO
(right and left channels are active)
Audio Language
L-ch
(left channel is active)
DVD
R-ch
(right channel is active)
This unit allows you to select an audio language (if multiple
languages are available) during DVD playback.
Virtual Surround
Press [AUDIO] to change audio language.
1
DVD
AUDIO
1.ENG Dolby D 3/2.1ch 48k/3
PLAY
You can enjoy stereophonic virtual world on your existing 2
channel stereo system.
Each time you press [AUDIO], audio language changes as
example below.
Press [MODE] twice (once for CD) during playback.
1
ENG
SPA
FRE
(English audio)
(Spanish audio)
(French audio)
OFF
MODE
PLAY
Press [ENTER] for the desired effect.
2
ENTER
1
1: Natural effect
2: Emphasized effect
OFF: No effects (original sound)
Hint
RETURN
Press [RETURN
] to exit.
• Some discs will only allow you to change the audio setting from the disc menu.
Refer to the manual accompanying the discs for details.
3
• When “OFF” appears on the TV screen, it means audio language is not
available.
Hint
• If your language is not shown after pressing [AUDIO] several times, the disc
may not have that language. However, some discs allow audio language set-
ting on the disc menu. (Operation varies depending on the disc, so refer to the
manual along with the disc.)
For CD play back only
• Virtual Surround will not be effective if the sound mode is set to something
other than STEREO. Refer to “Stereo Sound Mode”.
–
–
19
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
DVD Setup
QUICK SETUP Menu
You can select the “PLAYER MENU”, “TV ASPECT” or “DOLBY DIGITAL” from the QUICK SETUP menu quickly.
1
Press [SETUP] in the stop mode.
2
Select the desired item.
SETUP
or
STOP
SETUP
QUICK
ENGLISH
<SETUP MENU>
ENTER
P20
P21
P21
Step 5
Step 5
Step 5
A
B
C
Confirm that “QUICK” is selected.
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
4:3 LETTER BOX
BITSTREAM
SETUP
QUICK
CUSTOM
INITIALIZE
ENTER
•
Refer to the sections “PLAYER MENU”, “TV ASPECT”
or “DOLBY DIGITAL” section on page 20 or 21.
CUSTOM Menu
You can change the settings of the unit.
QUICK
on pages 20-21 indicates DVD Setup menus also accessible from the QUICK SETUP menu.
•
1
Press [SETUP] in the stop mode.
2
Select “CUSTOM”.
3
Select the desired item.
SETUP
ENTER
STOP
or
or
<SETUP MENU>
ENTER
SETUP
CUSTOM
SETUP
SETUP
LANGUAGE
DISPLAY
AUDIO
PARENTAL
OTHERS
QUICK
CUSTOM
INITIALIZE
QUICK
CUSTOM
INITIALIZE
LANGUAGE menu
OTHERS menu
DISPLAY menu
AUDIO menu
PARENTAL menu
SETUP
LANGUAGE
SETUP
DISPLAY
SETUP
PARENTAL
SETUP
OTHERS
SETUP
AUDIO
PASSWORD
AUDIO
ORIGINAL
OFF
ENGLISH
ENGLISH
TV ASPECT
STILL MODE
4:3 LETTER BOX
AUTO
ANGLE ICON
AUTO POWER OFF ON
ON
DRC
ON
Please enter a 4-digit password.
SUBTITLE
DISC MENU
PLAYER MENU
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
page 20
page 21
page 21
page 22
page 22
A
B
C
D
E
LANGUAGE Setting
Follow steps 1 to ꢀ in the “CUSTOM Menu” section on above.
A
5
Select the desired language.
4
Select the desired item.
6
To exit the menu
ENTER
ENTER
SETUP
or
or
AUDIO: *1 *2
Hint
AUDIO
(Default: ORIGINAL)
Sets the audio language.
ORIGINAL
ENGLISH
FRENCH
*1
• Language options are not available with
some discs.
• If OTHER is selected on the AUDIO,
SUBTITLE or DISC MENU screen, press
four-digit number to enter the code for the
desired language. (Refer to the language
code list on page 24.)
• Only the languages supported by the disc
can be selected.
*2
LANGUAGE menu
SUBTITLE: *1 *2
(Default: OFF)
Sets the subtitle language.
SUBTITLE
OFF
ENGLISH
FRENCH
SETUP
LANGUAGE
AUDIO
ORIGINAL
SUBTITLE
DISC MENU
PLAYER MENU
OFF
ENGLISH
ENGLISH
DISC MENU: *1
(Default: ENGLISH)
Sets the language for DVD
menu.
DISC MENU
ENGLISH
FRENCH
SPANISH
• Language Setting for Audio and Subtitle are
not available with some discs. Then use
[AUDIO] and [SUBTITLE/T-SET]. Details
are on page 19.
QUICK
PLAYER MENU:
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
(Default: ENGLISH)
Sets the language for the
On-screen display.
–
–
Download from Www.Somanuals.com2. 0All Manuals Search And Download.
EN
DISPLAY Setting
B
You can change the display functions. Follow steps 1 to ꢀ in the “CUSTOM Menu” section on page 20.
4
Select the desired item.
5
6 To exit the menu
QUICK
TV ASPECT:
SETUP
(Default: 4:3 LETTER BOX)
See Hint on the right.
Select the
desired
setting.
or
TV ASPECT
ENTER
TV ASPECT
STILL MODE
4:3 LETTER BOX
AUTO
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
Hint
ENTER
or
TV ASPECT:
• Select “4:ꢀ LETTER BOX”, so
that black bars may appear on
the top and bottom of the screen.
• Select “4:ꢀ PAN & SCAN” for a
full height picture with both sides
adjusted.
• Select “16:9 WIDE” if a wide-
screen TV is connected to this
unit.
DISPLAY menu
SETUP
DISPLAY
STILL MODE:
(Default: AUTO)
See Hint on the right.
TV ASPECT
STILL MODE
4:3 LETTER BOX
AUTO
Select the
desired
setting.
STILL MODE
ENTER
TV ASPECT
STILL MODE
4:3 LETTER BOX
AUTO
AUTO
FIELD
FRAME
ENTER
or
STILL MODE:
• Select “AUTO” usually.
• If you select “AUTO”, automati-
cally select the best resolution
setting (FRAME or FIELD) based
on the data characteristics of the
pictures. (default)
• If you select “FIELD”, the picture
in the still mode will be stabi-
lized.
• If you select “FRAME”, the
picture in the still mode will be
highly defined.
• An individual picture on TV
screen is called a “frame”, which
consists of two separate images
called as “field”.
• Some pictures may be blurred
if you select “AUTO” in the still
mode due to their date charac-
teristics.
AUDIO Setting
C
Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow steps 1 to ꢀ
in the “CUSTOM Menu” section on page 20.
5
6 To exit the menu
4
Select the desired item.
DRC (Dynamic Range Control):
(Default: ON)
SETUP
Set to “ON” to compress the range between soft and loud sounds.
or
DRC
ON
OFF
DOWN SAMPLING ON
ON
DOLBY DIGITAL
BITSTREAM
BITSTREAM
Hint
ENTER
DRC:
AUDIO menu
• This function is available only on
the discs which are recorded in
the Dolby Digital format.
SETUP
AUDIO
DOWN SAMPLING:
(Default: ON)
Set to “ON” when outputting in 48kHz.
DOWN SAMPLING:
DRC
ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
• When playing back a 96kHz disc
with the copyright protection,
or when Virtual Surround is set
to “1” or “2”, the sound will be
down sampled at 48kHz and
output as digital audio even if
the “DOWN SAMPLING” is set
to “OFF”.
Set to “OFF” when outputting the original sound.
DRC
ON
ON
OFF
BITSTREAM
DOWN SAMPLING ON
DOLBY DIGITAL
BITSTREAM
ENTER
• This function is available only
on digital outputting of a disc
recorded in 96kHz.
QUICK
DOLBY DIGITAL:
(Default: BITSTREAM)
Set to “BITSTREAM” when the unit is connected to a Dolby Digital decoder.
• BITSTREAM: outputs a Dolby Digital Signals.
• PCM: converts the Dolby Digital into PCM (2 channel).
DRC
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
ON
ON
ON
PCM
ENTER
–
–
21
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
PARENTAL Setting
D
Parental Control limits the disc viewing that exceed your settings. (An incorrect password will not be acceptable.)
This feature prevents your children from viewing inappropriate materials.
Parental Levels
Parental Level allows you to set the rating levels of your DVD discs. Playback will stop if the ratings exceed the levels you set.
Follow steps 1 to ꢀ in the “CUSTOM Menu” section on page 20.
4
Enter your desired four-digit
password.
5
Select “PARENTAL
LEVEL”.
6
Select the desired
level.
7
To exit the menu
SETUP
1
4
7
2
5
8
0
3
6
9
or
or
ENTER
ENTER
ENTER
PARENTAL LEVEL
PARENTAL LEVEL
PASSWORD CHANGE
ALL
ALL
8
7 [NC-17]
6 [R]
PARENTAL menu
CONTROL LEVELS
SETUP
PARENTAL
• ALL:
All parental locks are cancelled.
DVD softwares of any grades (adult/general/children) can be played back.
Only DVD softwares intended for general use and children can be played back.
PASSWORD
• Level 8:
• Levels 7 to 2:
Please enter a 4-digit password.
• Level 1:
Only DVD softwares intended for children can be played back, with those intend-
ed for adult and general use prohibited.
TIPS FOR LEVELS
• 7 [NC-17]:
• 6 [R]:
• 4 [PG1ꢀ]:
• ꢀ [PG]:
• 1 [G]:
No one under 17 admitted
or
Restricted; under 17 requires accompanying parent or adult guardian
Unsuitable for children under 1ꢀ
Parental Guidance suggested
If you have set a password
already, enter the current
four-digit password.
General Audience
SETUP
PARENTAL
PASSWORD
Enter current password.
Hint
• DVD-Video discs may not respond to the parental lock settings. Make sure this function works with
your DVD-Video discs.
To Change the Password for Parental Controls
You can change your password for parental controls. Follow steps 1 to ꢀ in the “CUSTOM Menu” section on page 20.
4
Enter current four-digit
password.
5
Select “PASSWORD
CHANGE”.
6
Enter your new
four-digit password
(except for 47ꢀ7).
7
To exit the menu
SETUP
1
4
7
2
5
8
0
3
6
9
1
4
7
2
5
8
0
3
6
9
or
ENTER
ENTER
PARENTAL LEVEL
PASSWORD CHANGE
ALL
Hint
• Record the password
in case you forget it.
PARENTAL menu
SETUP
PASSWORD
Please enter a 4-digit password.
PARENTAL
• If you forget the
password, press [4],
[7], [3], [7] at step 4,
then enter your new
password.Password
will be cleared and
parental levels will be
set to “ALL”.
SETUP
PARENTAL
PASSWORD
Enter current password.
OTHERS Setting
E
You can change the other functions. Follow steps 1 to ꢀ in the “CUSTOM Menu” section on page 20.
4
Select the desired item.
5
6
To exit the menu
ANGLE ICON:
(Default: ON)
SETUP
Set to “ON” to show the angle icon when multiple camera angles are
available during DVD playback.
or
OFF
ON
ANGLE ICON
AUTO POWER OFF ON
ON
ENTER
OTHERS menu
SETUP
OTHERS
AUTO POWER OFF:
(Default: ON)
ANGLE ICON
AUTO POWER OFF
ON
ON
Set to “ON” to turn this unit off automatically after ꢀ0 minutes of no use.
ANGLE ICON
ON
ON
AUTO POWER OFF ON
OFF
ENTER
–
–
Download from Www.Somanuals.com2. 2All Manuals Search And Download.
EN
Reset to the Default Setting (Except for PARENTAL Setting)
To exit the
menu
1
Press [SETUP] in the
2
Select “INITIALIZE”.
3
Select “YES”.
4
stop mode.
SETUP
SETUP
STOP
or
or
ENTER
ENTER
<SETUP MENU>
Press
twice.
SETUP
SETUP
INITIALIZE
SETUP
Hint
• When you cancel
to initialize at step
ꢀ, select “NO”.
QUICK
CUSTOM
INITIALIZE
Initialize?
NO
YES
QUICK
CUSTOM
INITIALIZE
Information
Troubleshooting Guide
If this unit does not perform properly when operated as instructed in this Owner's Manual, check this unit consulting the following checklist.
PROBLEM CORRECTIVE ACTION
No power.
• Make sure the power plug is connected to an AC outlet.
• Make sure the power is turned on.
This unit does not
respond to the remote
control.
• Check if the power plug is connected to an AC outlet.
• Check the batteries in the remote control.
• Aim the remote control directly at the remote sensor. If necessary, remove all the obstacles between the sensor and the remote control.
• You have to be within 2ꢀ feet (7m) of this unit.
• Check if the right mode is selected. If it’s not in the right mode, press [DVD] or [VCR], whichever you need, on the remote control.
• Check if a cassette tape is in this unit.
• Tune your radio to an empty AM station so that you hear a lot of noises. Turn the volume up, then if you hear some signal sound from the radio
in response to your pressing buttons on the remote control, the remote control is working.
Poor picture or noise.
• Interference signal may be received. Change the position and orientation of the unit.
Timer recording is impos-
sible.
• Make sure the Timer Recording is set correctly.
• Make sure TIMER REC indicator on the front panel lights up. If not, press [SUBTITLE/T-SET].
• Make sure the VCR clock is set correctly.
Cannot go into record
mode.
• Make sure the tape has a record tab. If needed, cover the hole with adhesive tape.
• Activate this unit in VCR mode. Press [VCR] on the remote control so that the VCR OUTPUT light is lit.
Playback picture is partially
noisy.
• Adjust tracking control for a better picture by pressing [CHANNELL/K]] on the unit or [SKIP/CH. G/K, H/L] on the remote control.
Cannot view a tape but
the audio is OK.
• Head cleaning may be necessary. Refer to “AUTO HEAD CLEANING”.
• Make sure the VCR is not in the Menu mode.
No or poor, playback
picture.
• Change the RF output channel to CH4. Then select the same channel on the TV.
• Fine tune your TV.
TV programs cannot be
seen normally.
• Re-check the ANT-IN and ANT-OUT connections. See the front page and page 6.
• Press [VCR].
• Press [VCR] on the remote control to activate it in the VCR mode. Check if the VCR OUTPUT light is lit, then set it to the TV position by press-
ing [VCR].
Video or color fades in
and out when making a
copy of a video tape.
• You cannot copy a copyrighted video tape. You are experiencing copy guard protection.
Cannot remove the tape.
No picture.
• Check if this unit is in the VCR mode. If not, press [VCR] on the remote control to switch the mode.
• Connect the video cable firmly.
• Insert a correct video disc that plays on this unit.
• Press [DVD] on the remote control. Check if the DVD OUTPUT light is lit. Then try other DVD features.
Disc cannot be played.
• Insert the disc.
• Clean the disc.
• Place the disc correctly with the label side up.
• Cancel the parental lock or change the control levels.
• Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its surface.
No sound.
• Connect the audio cables firmly.
• Turn the power of the audio component on.
• Correct the audio output settings.
• Correct the input settings on the audio component.
Distorted picture.
• Connect this unit directly to the TV.
• There are some cases where pictures may be slightly distorted, and those are not a sign of a malfunction.
• Although pictures may stop for a moment, this is not a malfunction.
Audio or subtitle language
does not match the setup.
• The selected language is not available for audio or subtitles on the DVD.
-This is not a malfunction.
The camera angle cannot
be changed.
• The DVD does not contain sequences recorded from different camera angles.
-This is not a malfunction.
Audio or subtitle language
cannot be changed.
• The DVD does not contain audio source or subtitles in the selected language.
-This is not a malfunction.
“Prohibited icon” appears
on the screen, prohibiting
an operation.
• That operation is prohibited by this unit or the disc.
-This is not a malfunction.
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s Manual for details on correct operations.
• Playback from a desired track and random playback are not available during program playback.
• Some functions are prohibited on some discs.
–
–
2ꢀ
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Video Heads :
Four Heads
Output signal format :
NTSC color
Power source :
120 V AC +/- 10%, 60 Hz +/- 0.5%
Power consumption :
21 W (standby: ꢀ.8W)
• Designs and specifications are subject
to change without notice.
• If there is a discrepancy between lan-
guages, the default language will be
English.
Operating temperature :
41°F (5°C) to 104°F (40°C)
Dimensions :
W : 17 ꢀ/16”
H : ꢀ ꢀ/4”
(4ꢀ5mm)
(94mm)
D : 9 ꢀ/16”
(2ꢀꢀmm)
Weight :
Approx 6.0lbs (2.7kg)
Language Code List
Language
Code
Language
French [FRE]
Frisian
Code
Language
Macedonian
Malagasy
Malay
Code
Language
Siswat
Slovak
Slovenian
Somali
Code
A-B
5264
5271
5ꢀ58
5747
5051
5158
5758
5ꢀ60
5ꢀ67
5447
5569
5455
5467
5957
595ꢀ
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
6565
6557
6558
6561
5165
6567
6569
6568
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
4748
4747
4752
656ꢀ
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
485ꢀ
5971
4851
Galician
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Malayalam
Maltese
Maori
Spanish [SPA]
Sundanese
Swahili
Marathi
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Moldavian
Mongolian
Nauru
Swedish [SWE]
T
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
6658
665ꢀ
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
Nepali
Norwegian [NOR]
Hindi
Hungarian [HUN]
Basque
O-R
Bengali;Bangla
Bhutani
Bihari
I-K
Occitan
Oriya
Oromo(Afan)
Panjabi
Pashto;Pushto
Persian
Polish
Portuguese [POR]
Quechua
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
S
Samoan
Sangho
Sanskrit
6149
6164
6159
6247
6265
5247
6258
6266
6ꢀ67
6459
6461
6467
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
5565
5560
5547
5551
5557
5ꢀ47
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
Bislama
Breton
Bulgarian
Burmese
Byelorussian
Irish [IRI]
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
C-E
Cambodian
Catalan
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
U-Z
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
Chinese [CHI]
Corsican
Croatian
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean [KOR]
Kurdish
6559
655ꢀ
6547
5ꢀ50
6564
6554
6566
6660
6560
6550
6555
Czech
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
L-N
Laothian
Latin
Latvian;Lettish
Lingala
Lithuanian
5861
5847
5868
5860
5866
F-H
Setswana
Shona
Sindhi
Faroese
Fiji
Finnish [FIN]
5261
5256
5255
Singhalese
If you choose a Language that has a ꢀ letter language code, the code will be displayed every time you change the Audio or Subtitle language setting on page 19. If you
choose any other languages, ‘---’ will be displayed instead. (ꢀ letter language code is written in bracket.)
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in the event
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO
EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL
DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE
INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU
OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL
OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES
INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FITNESS
of defect in materials or workmanship as follows:
DURATION:
PARTS: FUNAI CORP. will provide parts to replace defective parts without
charge for one (1) year from the date of original retail purchase.
Certain parts are excluded from this warranty.
LABOR: FUNAI CORP. will provide the labor without charge for a period of
FOR
A
PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY
ninety (90) days from the date of original retail purchase.
FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES. ALL
WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY
AN AUTHORIZED SERVICE CENTER. THIS WARRANTY IS VALID WHEN
THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.
LIMITS AND EXCLUSIONS:
This warranty is extended only to the original retail purchaser. A purchase
receipt or other proof of original retail purchase will be required together with
the product to obtain service under this warranty.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU
MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. IF,
AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO
OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE
CONTACT FUNAI CORP.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are
altered, replaced, defaced, missing or if service was attempted by an unau-
thorized service center. This limited warranty does not apply to any product
not purchased and used in the United States.
ATTENTION:
This product is produced for home use and this warranty only covers failures
due to defects in material or workmanship which occurs during normal use. It
does not cover damage which occurs in shipment, or failures which are caused
by repairs, alterations or product not supplied by FUNAI CORP., or damage
which results from accident, misuse, abuse, mishandling, misapplication, altera-
tion, faulty installation, improper maintenance, commercial use such as hotel,
rental or office use of this product or damage which results from fire, flood,
lightning or other acts of God.
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF
THIS PRODUCT WITHOUT PRIOR NOTICE.
To locate your nearest AUTHORIZED SERVICE CENTER or for general
service inquiries, please contact us at:
FUNAI CORPORATION
Customer Service
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY
ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS,
COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
Tel :1-800-605-8610
19900 Van Ness Avenue, Torrance, CA 90501
–
–
Download from Www.Somanuals.com2. 4All Manuals Search And Download.
EN
Español
Conexiones
Consulte la “Basic TV Connection” en la página delantera
antes de utilizar esta unidad.
Pulse [B] para AJUSTE AUTO.
CA 01
3
1
AJUSTE AUTO
Canal de salida RF
Si el canal 3 se está utilizando para una transmisión,
1) Programe su televisor al canal 4.
Conecta el cable de la caja de canales de cable o la caja de satélite en la
toma ANT-IN de la unidad?
2) Inserte una cinta pregrabada en esta unidad.
ꢀ) Pulse [SOURCE] en la unidad para que se encienda la
luz VCR OUTPUT.
• Si aparece ruido en la pantalla de TV, presione [VCR/TV]
en el mando a distancia.
4) Pulse una vez [PLAY B].
5) Después de unos segundos, pulse [PLAY B] en la uni-
dad durante ꢀ segundos.
• El canal de salida RF cambiará del canal ꢀ al canal 4 y
podrá ver una imagen reproducida.
• Cuando no aparezca una imagen en la pantalla del televi-
sor, repita el paso 4.
SI
NO
Si Pulse [MENU] para salir.
No Espere unos minutos.
Después del escaneo
• El sintonizador se detiene en el canal memorizado más bajo.
• Puede seleccionar sólo los canales memorizados en esta unidad con
[SKIP/CH. G//K, H//L] (o [CHANNEL K // L]).
• Si aparece nuevamente “AJUSTE AUTO” en la pantalla de TV, verifique las
conexiones de cable. Presione nuevamente [B].
Ajuste del reloj
6) Pulse [STOP C] para parar la reproducción.
5
VCR
Instalación de las pilas del control remo-
2
to
- M E N U -
MENU
1
PROGRAMAR
o
AUTOREPETIR
AJUSTE CANAL
[OFF]
1
2
3
B AJUSTE DE RELOJ
SELEC. IDIOMA
• Si no se ha ajustado el reloj, aparece la
pantalla AJUSTE DE RELOJ cuando pulse
[MENU]. En este caso, vaya al paso 2.
Seleccione el mes actual.
AJUSTE DE RELOJ
2
3
4
5
6
7
8
MES
1 0
DIA
– –
AÑO
– – – –
/
Conmutación VCR/DVD
3
HORA MINUTO AM/PM
– – – – – –
o
:
OPEN/CLOSE
/EJECT
OPEN/CLOSE
STANDBY-ON
SPEED
AUDIO
VCR
DVD
DISC IN PLAY
STOP PLAY NEXT
1
4
7
2
5
8
3
6
9
CHANNEL
SOURCE
PREV
SKIP/CH.
Seleccione el dia actual.
AJUSTE DE RELOJ
VCR/TV
SLOW
MES
1 0
DIA
0 2
AÑO
– – – –
/
0
VCR
+10
DVD
Botón VCR
Botón DVD
DISPLAY
PAUSE
HORA MINUTO AM/PM
– – – – – –
o
:
PLAY
STOP
RECORD
MENU
VCR
DVD
ENTER
Luz
DVD OUTPUT
SETUP TOP MENU
RETURN
Seleccione el año actual.
SOURCE
AJUSTE DE RELOJ
SEARCH
MODE
CLEAR/
C. RESET
MODE
ZOOM
MES
1 0
DIA
0 2
AÑO
2 0 0 6
SUBTITLE
T
-SET
ANGLE
REPEAT
A-B
/
Botón SOURCE
HORA MINUTO AM/PM
– – – – – –
o
:
Luz
VCR OUTPUT
Seleccione la hora actual.
AJUSTE DE RELOJ
MODO VCR
MES
1 0
DIA
AÑO
/
0 2 LUN 2 0 0 6
Pulse [VCR] en el control remoto. (Compruebe que está encen-
HORA MINUTO AM/PM
0 5 – – – –
o
dida la luz VCR OUTPUT.)
:
MODO DVD
Pulse [DVD] en el control remoto. (Compruebe que está encen-
dida la luz DVD OUTPUT.)
Seleccione los minutos actuales.
AJUSTE DE RELOJ
MES
1 0
DIA
AÑO
/
0 2 LUN 2 0 0 6
Consejo
HORA MINUTO AM/PM
0 5 4 0 – –
o
:
• Si pulsa sólo [SOURCE] en el panel frontal NO cambía el modo del control
remoto. DEBE seleccionar también el modo correcto en el control remoto.
Seleccione “AM” o “PM”.
AJUSTE DE RELOJ
Activación de la unidad por primera vez
MES
1 0
DIA
AÑO
4
/
0 2 LUN 2 0 0 6
VCR
HORA MINUTO AM/PM
o
0 5
:
4 0
P M AM
BPM
1
2
Encienda el televisor y sintonice al canal ꢀ.
Para salir de la pantalla AJUSTE DE RELOJ
• Si el canal ꢀ se está utilizando para una transmisión, vea la
sección “RF Output Channel”.
LANGUAGE SELECT
STANDBY-ON
B ENGLISH
FRANCAIS
ESPAÑOL
[ON]
o
–
–
25
ES
Download from Www.Somanuals.com. All Manuals Search And Download.
Español
Modo DVD
Mode de grabadora de video
Reproducción de la
6
Disco/cinta
Botón
grabadora de vídeo
(Orden alfavético)
1
4
7
2
5
8
0
3
6
•Para seleccionar el canal.
Antes: Encienda el televisor
y cambie al canal ꢀ.
• Si el canal ꢀ se está utilizando para
una transmisión, vea la sección
“RF Output Channel”.
•Para seleccionar directamente •Para seleccionar directamente •El botón +10 no tiene efecto
el capítulo o el título.
la canción.
en el modo de grabadora de
vídeo.
9
+10
•Para buscar en avance/
retroceso en un disco.
•Para buscar en avance/retro- •Para el avance/retroceso de
ceso en un disco.
•Para empezar la reproducción
en avance/retroceso lento
durante el modo de pausa.
una cinta.
VCR
A-B
•Para repetir entre los puntos A •Para repetir entre los puntos A
y B elegidos.
y B elegidos.
Para empezar la
reproducción
1
3
2
4
ANGLE
AUDIO
•
Para seleccionar los ángulos
de la cámara en un disco.
•Para seleccionar el idioma de
audio en un disco.
•
•
Para seleccionar ESTÉREO,
L-ch o R-ch.
PLAY
Para borrar los marcadores.
•Para borrar los marcadores.
•Para borrar los números
entrados incorrectamente.
•Para borrar el punto para la
repetición A-B.
•Para retirar el Nº de estado en
la entrada de programa.
•Para borrar los números
entrados incorrectamente.
•Para borrar el punto para la
repetición A-B.
•Para salir del menú de la
grabadora de vídeo.
•Para reponer el contador de
cinta.
CLEAR/
C. RESET
Para parar la
reproducción
Para expulsar
OPEN/CLOSE
/EJECT
STOP
DISPLAY
•Para indicar el modo de disco •Para indicar el modo de disco •Para indicar la hora actual,
actual.
actual.
contador de cinta y canal.
•Para seleccionar el modo de
salida de DVD.
•Para activar el mando a dis-
tancia en el modo DVD.
•Para seleccionar el modo de
salida de DVD.
•Para activar el mando a dis-
tancia en el modo DVD.
DVD
Reproducción de DVD/
CD
7
•
•
•
Para seleccionar un
ítem en el menú de la
grabadora de vídeo.
Para avanzar al
siguiente menú de la
grabadora de vídeo.
Para volver un paso
durante el ajuste del
reloj y temporizador.
ENTER
•Para mover el cursor y deter- •Para mover el cursor y deter-
Antes: Encienda el televisor, amplificador y
otros equipos que puedan estar conectados a
esta unidad. Asegúrese que el televisor y el
sintoamplificador de audio (de venta en los
comercios) están en el canal correcto.
minar su posición.
minar su posición.
MENU
•Para llamar el menu en un
disco.
•Para llamar el menú de la
grabadora de vídeo.
•Para activar/desactivar el nivel
del negro.
•Para activar/desactivar el
envolvente virtual.
•
Para disponer el orden de repro-
ducción o la reproducción aleatoria.
MODE
DVD
•Para activar/desactivar el
envolvente virtual.
OPEN/CLOSE
/EJECT
•Para abrir o cerrar la bandeja •Para abrir o cerrar la bandeja
•
•
Para expulsar el videocasete
de la grabadora de vídeo.
1
2
del disco.
del disco.
OPEN/CLOSE
/EJECT
•Para hacer una pausa de
reproducción del disco.
•Para avanzar la reproducción
un cuadro a la vez.
Para hacer una pausa de la repro-
ducción o grabación de la cinta.
•Para avanzar la reproducción
un cuadro a la vez.
STANDBY-ON
PAUSE
•Para hacer una pausa en la
reproducción del disco.
Ponga un disco con la
etiqueta hacia arriba.
•Para empezar la reproducción •Para empezar la reproducción •Para empezar la reproducción
PLAY
del disco.
del disco.
de la cinta.
RECORD
•
Para empezar una grabaciòn
una grabaciòn de un toque.
o
Para parar la
reproducción
Para empezar
la reproducción
3
4
REPEAT
•
Para reproducir repetidamente
un capítulo o título.
•
Para reproducir repetidamente
una canción o disco.
STOP
PLAY
RETURN
•Para volver a la operación
previa en el menú.
•Para volver a la operación
previa en el menú.
•Para buscar un capítulo, título •Para buscar una canción.
u hora. •Para buscar la hora.
SEARCH
MODE
•Para llamar el menú de
búsqueda de índice u hora.
•Para colocar o buscar los mar- •Para colocar o buscar los
Control remoto
cadores.
marcadores.
8
SETUP
•Para llamar el menú de
programación de DVD.
•Para llamar el menú de
programación de DVD.
OPEN/CLOSE
STANDBY-ON
/EJECT
SPEED
AUDIO
SKIP/CH.
SKIP/CH.
•Para cambiar de canal.
•Para saltar capítulos o titulo.
•Para saltar canciones.
•
Para ajustar manualmente elseg-
uimiento durante la reproducción.
1
4
7
2
5
8
3
6
9
SKIP/CH.
SLOW
•Para ver la cinta en cámara
lenta.
VCR/TV
SLOW
SPEED
•Para seleccionar la velocidad
de grabación.
0
VCR
+10
DVD
DISPLAY
PAUSE
STANDBY-ON
•Para encender o apagar la
unidad.
•Para encender o apagar la
unidad.
•Para encender o apagar la
unidad.
PLAY
STOP
RECORD
MENU
STOP
•Para parar la reproducción o
grabación.
•Para parar la reproducción.
•Para parar la reproducción.
ENTER
SUBTITLE
T-SET
SETUP TOP MENU
RETURN
•
Para poner la grabadora de vídeo
en el modo de espera para una
grabación con temporizador.
•Para seleccionar subtítulos en
un disco.
SEARCH
MODE
CLEAR/
C. RESET
MODE
ZOOM
SUBTITLE
T-SET
ANGLE
REPEAT
A-B
TOP MENU
•Para llamar el menú superior
en un disco.
•
•
Para seleccionar el modo de salida
de la grabadora de vídeo.
Para activar el mando a distancia en
el modo de la grabadora de vídeo.
VCR
VCR/TV
•
Para seleccionar la posición de
DVD o posición del elevisor.
•
Para seleccionar la posición de CD
o la posición del televisor.
•
Para seleccionar la posición de la graba-
dora de vídeo o posición del televisor.
ZOOM
•Para ampliar parte de la
imagen. (x2/x4)
–
–
Download from Www.Somanuals.com2. 6All Manuals Search And Download.
ES
Quick Use Guide
Connections
Please refer to “Basic TV Connection” on the front page
Press [B] to start Auto Set Up.
1
CH 01
3
AUTO SET UP
before you use this unit.
RF Output Channel
If channel 3 has been already occupied for broadcasting,
1) Set your TV to channel 4.
Do you connect the cable from the cable box or the satellite box to the unit’s
ANT-IN jack?
2) Insert a pre-recorded tape into this unit.
ꢀ) Press [SOURCE] on the unit so that the VCR OUTPUT
light is lit.
YES
NO
Yes Press [MENU] to exit.
•
If noise appears on the TV screen, press [VCR/TV] on the
No Please wait for a few minutes.
After scanning...
• The tuner stops on the lowest memorized channel.
• You can select only the channels memorized in this unit by using
remote control.
4) Press [PLAY B] once.
5) After a few seconds, press and hold [PLAY B] on the
unit for ꢀ seconds.
• The RF output channel will change to channel 4 from
channel ꢀ and you will see a playback picture.
• When a picture does not appear on the TV screen,
repeat step 4.
[SKIP/CH. G/K, H/L] (or [CHANNEL K/L]).
• If “AUTO SET UP” appears on the TV screen again, check the cable
connections. Then, press [B] once again.
6) Press [STOP C] to stop playback.
Clock Set Up
5
VCR
Installing the Batteries for the Remote
Control
2
Press [MENU] and select “CLOCK SET“.
Then press [B] to go to next step.
- M E N U -
TIMER PROGRAMMING
1
1
AUTO REPEAT
CHANNEL SET UP
B CLOCK SET
[OFF]
2
3
MENU
LANGUAGE SELECT
or
• If the clock is not set, the CLOCK SET screen appears when you press
[MENU]. In this case, go to step 2.
VCR/DVD Switching
CLOCK SET
3
Select the current month.
Then press [B] to go to next step.
2
3
MONTH DAY
1 0 – –
YEAR
– – – –
/
OPEN/CLOSE
/EJECT
OPEN/CLOSE
STANDBY-ON
SPEED
AUDIO
HOUR MINUTE AM/PM
– –
:
– –
– –
or
VCR
DVD
DISC IN PLAY
STOP PLAY NEXT
1
4
7
2
5
8
3
6
9
CHANNEL
SOURCE
PREV
SKIP/CH.
VCR/TV
SLOW
0
VCR
+10
DVD
CLOCK SET
Select the current day.
Then press [B] to go to next step.
VCR button
DISPLAY
PAUSE
MONTH DAY
1 0 0 2
YEAR
– – – –
DVD button
PLAY
/
STOP
RECORD
MENU
HOUR MINUTE AM/PM
– –
:
– –
– –
VCR
DVD
or
ENTER
DVD OUTPUT
light
SETUP TOP MENU
RETURN
SOURCE
SEARCH
MODE
CLEAR/
C. RESET
MODE
ZOOM
SUBTITLE
T
-SET
ANGLE
REPEAT
A-B
CLOCK SET
SOURCE button
Select the current year.
Then press [B] to go to next step.
4
5
MONTH DAY
1 0 0 2
YEAR
VCR OUTPUT light
/
2 0 0 6
HOUR MINUTE AM/PM
– –
:
– –
– –
or
VCR MODE
Select the current hour.
Then press [B] to go to next step.
CLOCK SET
Press [VCR] on the remote control.(Verify that the VCR OUTPUT
MONTH DAY
1 0
YEAR
light is lit.)
/
0 2 MON 2 0 0 6
DVD MODE
Press [DVD] on the remote control.(Verify that the DVD OUTPUT
light is lit.)
HOUR MINUTE AM/PM
or
0 5
:
– –
– –
CLOCK SET
Select the current minute.
Then press [B] to go to next step.
Hint
6
7
8
MONTH DAY
1 0
YEAR
/
0 2 MON 2 0 0 6
• Pressing only [SOURCE] on the front panel DOES NOT switch the
mode of the remote control. You MUST select the correct mode on
the remote control.
HOUR MINUTE AM/PM
0 5
:
4 0
– –
or
CLOCK SET
Select “AM” or “PM”.
Turn On the Unit for the First Time
MONTH DAY
1 0
YEAR
4
/
0 2 MON 2 0 0 6
VCR
HOUR MINUTE AM/PM
or
0 5
:
4 0
P M AM
B PM
Turn on the TV and set it to channel ꢀ.
• If channel ꢀ has been already occupied for broadcasting,
1
To exit the CLOCK SET screen
see “RF Output Channel” section.
Select your language in the first time you turn on this unit.
2
LANGUAGE SELECT
Then press [B] to go to next step.
B ENGLISH
FRANCAIS
ESPAÑOL
[ON]
STANDBY-ON
or
–
–
27
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Use Guide
DVD mode
VCR mode
VCR Playback
6
Disc/Tape
Button
(Alphabetical order)
Before: Turn on the TV and
set it to channel ꢀ.
• If channel ꢀ has been already
occupied for broadcasting, see “RF
Output Channel” section.
1
4
7
2
5
8
0
3
6
•To select channel.
•The +10 button has no
effect in VCR mode.
•To select chapter or title
•To select track directly.
9
directly.
+10
•
•
To search forward/backward
through a disc.
To begin slow forward/reverse through a disc.
playback in the pause mode.
VCR
•To search forward/backward
•To forward/backward a tape.
A-B
Insert a video
To start
playback
2
4
•To repeat between your
chosen point A and B.
•
To repeat between your cho-
sen point A and B.
1
3
cassette into this unit.
ANGLE
AUDIO
•To select camera angles on
a disc.
PLAY
•To select audio languages
on a disc.
•To select STEREO,
L-ch or R-ch.
•
To clear the markers.
To stop
playback
To eject the
cassette
•To clear the markers.
•To clear the numbers
entered incorrectly.
•To cancel the point for A-B
repeat.
•To remove status number in
program input.
CLEAR/
C. RESET
•To exit the VCR Menu.
•To reset the tape counter.
OPEN/CLOSE
/EJECT
•To clear the numbers
entered incorrectly.
•To cancel the point for A-B
repeat.
STOP
DISPLAY
•To display the current disc
mode.
•To display the current disc
mode.
•To display the current time,
tape counter, and channel.
DVD/CD Playback
•
To select the DVD output mode.
•
To select the DVD output mode.
DVD
7
•To activate the remote
control in DVD mode.
•To activate the remote
control in DVD mode.
Before: Turn on the TV, amplifier and any other
components which are connected to this unit.
Make sure the TV and audio receiver (commer-
cially available) are set to the correct channel.
•
•
•
To select an item
on the VCR Menu.
To advance to the
next VCR Menu.
To go back one
step during clock
and timer setting.
ENTER
•To move the cursor and
determine its position.
•To move the cursor and
determine its position.
DVD
MENU
•
To call up the Menu on a disc.
•To call up the VCR Menu.
1
3
2
•To set black level on/off.
•To set virtual surround
on/off.
•To arrange the playing order
or play randomly.
MODE
OPEN/CLOSE
/EJECT
STANDBY-ON
•
To set virtual surround on/off.
OPEN/CLOSE
/EJECT
•To open or close the disc
tray.
•To open or close the disc
tray.
•To eject the video
cassette from the VCR.
Insert a disc with
label facing up.
•To pause tape playback or
recording.
•To advance playback one
frame at a time.
•To pause disc playback.
•To advance playback one
frame at a time.
PAUSE
•To pause disc playback.
•To begin disc playback.
To stop
playback
To start
4
playback
•To begin disc playback.
•To begin tape playback.
PLAY
STOP
PLAY
RECORD
•To start a recording or One
Touch Recording.
REPEAT
•To play a chapter or title
repeatedly.
•To play a track or disc
repeatedly.
Remote Control
8
RETURN
•To return to the previous
operation in menu.
•To return to the previous
operation in menu.
SEARCH
MODE
OPEN/CLOSE
/EJECT
•To search chapter, title or
time.
•To search track.
•To search time.
STANDBY-ON
•To call up the index or time
search menu.
SPEED
AUDIO
•
To set or search the markers.
•
To set or search the markers.
1
4
7
2
5
8
3
6
9
SETUP
•To call up the DVD setup
menu.
•To call up the DVD setup
menu.
SKIP/CH.
VCR/TV
SLOW
•To change channels.
•To adjust the tracking
manually during playback.
SKIP/CH.
SKIP/CH.
•To skip chapters or titles.
•To skip tracks.
0
VCR
+10
DVD
DISPLAY
PAUSE
SLOW
• To view the tape in slow
motion.
PLAY
SPEED
•To select the recording
speed.
STOP
RECORD
MENU
STANDBY-ON
ENTER
•To turn the unit on/off.
•To turn the unit on/off.
•To stop playback.
•To turn the unit on/off.
SETUP TOP MENU
RETURN
SEARCH
MODE
CLEAR/
C. RESET
MODE
ZOOM
•To stop playback or
recording.
STOP
•To stop playback.
SUBTITLE
T-SET
ANGLE
REPEAT
A-B
SUBTITLE
T-SET
•
To put the VCR into standby
mode for a Timer Recording.
•To select subtitles on a disc.
TOP MENU
•To call up the Top Menu on
a disc.
•
To select the VCR output mode.
VCR
•To activate the remote
control in VCR mode.
VCR/TV
•To select DVD position or
TV position.
•To select CD position or TV •To select VCR position or
position.
TV position.
ZOOM
•To magnify part of a picture.
(x2/x4)
1VMN2256ꢀ / H986NUD★★★★★
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|