Magnavox DVD VCR Combo MWD2206 User Manual

Owner’s Manual  
Please read before using this unit.  
DVD/CD Player with Video Cassette Recorder  
INSTRUCCIONES EN  
ESPAÑOL INCLUIDAS.  
MWD2206  
Supplied Accessories  
Remote control (NB179UD) RF cable  
with two AA batteries  
(WPZ0901TM002)  
Audio/Video cables  
(WPZ0102TM015 /  
WPZ0102LTE01)  
Owner’s Manual  
(1VMN2209ꢀ)  
If you need additional operating assistance  
after reading this owner’s manual, please call  
TOLL FREE : 1-800-605-8610  
or visit our web site at  
Owner's Manual  
Table of Contents  
Precautions  
Recording................................................................................. 12  
Recording & OTR (One Touch Recording) ............................... 12  
Timer Recording........................................................................ 12  
Hints for OTR and Timer Recording.......................................... 1ꢀ  
Copying a Video Tape............................................................... 14  
Laser Safety................................................................................ 2  
Important Safeguards................................................................ 3  
Location and Handling ................................................................ 4  
Avoid the Hazards of Electrical Shock and Fire.......................... 4  
Moisture Condensation Warning................................................. 4  
About Copyright .......................................................................... 4  
Symbols Used in This Manual..................................................... 4  
Maintenance................................................................................ 4  
About the Video Cassettes and Discs ..................................... 5  
Playable Video Cassettes ........................................................... 5  
Playable Discs............................................................................. 5  
Unplayable Discs ........................................................................ 5  
DVD Functions  
Playback ................................................................................... 15  
On-Screen Display................................................................... 16  
Search Functions..................................................................... 17  
Using Track Search................................................................... 17  
Using Title / Chapter Search..................................................... 17  
Using Time Search.................................................................... 17  
Marker Setup............................................................................. 17  
Repeat / Random / Programmed Playback............................ 18  
Repeat Playback / Repeat A-B Playback  
Random Playback / Programmed Playback.............................. 18  
Special Settings....................................................................... 19  
Subtitle Language / Audio Language / Camera Angle  
Black Level Setting / Stereo Sound Mode / Virtual Surround.... 19  
DVD Setup ................................................................................ 20  
LANGUAGE Setting.................................................................. 20  
DISPLAY Setting....................................................................... 21  
AUDIO Setting........................................................................... 21  
PARENTAL Setting................................................................... 22  
OTHERS Setting....................................................................... 22  
Reset to the Default Setting (Except for PARENTAL Setting) .. 2ꢀ  
Setup  
Connections............................................................................... 6  
RF Output Channel ..................................................................... 6  
Hint for Cable Box or Satellite Box.............................................. 6  
Connection to an Audio System.................................................. 6  
Connection to a TV ..................................................................... 7  
Preparation for Use ................................................................... 8  
Turn On the Unit for the First Time ............................................. 8  
To Add or Delete Channels......................................................... 8  
Clock Setup................................................................................. 8  
Function Overview..................................................................... 9  
Front Panel Indicator................................................................... 9  
VCR / DVD Switching.................................................................. 9  
Front & Rear Terminals............................................................... 9  
Remote Control......................................................................... 10  
Installing the Batteries for the Remote Control ......................... 10  
Information  
Troubleshooting Guide ........................................................... 23  
Specifications .......................................................................... 24  
Language Code List ................................................................ 24  
Limited Warranty ..................................................................... 24  
Español..................................................................................... 25  
Quick Use Guide...................................................................... 27  
VCR Functions  
Playback ................................................................................... 11  
Other Operations ..................................................................... 11  
Index Search............................................................................. 11  
Time Search.............................................................................. 11  
Auto Repeat .............................................................................. 12  
Basic TV Connection  
Antenna  
or  
Cable TV Antenna  
signal  
or  
Cable TV  
signal  
(Back of DVD/VCR)  
(Back of TV)  
4
AC  
outlets  
(Back of TV)  
Plug in  
ANT-IN  
2
ANT-OUT  
Disconnect  
3
Connect  
Connect  
From DVD/VCR  
From TV  
RF cable (supplied)  
Please refer to “Connections” on page 6.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFEGUARDS  
1. Read Instructions - All the safety and operating instruc-  
tions should be read before the appliance is operated.  
2. Retain Instructions- The safety and operating instructions  
should be retained for future reference.  
ꢀ. Heed Warnings - All warnings on the appliance and in the  
operating instructions should be adhered to.  
4. Follow Instructions - All operating and use instructions  
should be followed.  
5. Cleaning - Unplug this video product from the wall outlet  
before cleaning. Do not use liquid cleaners or aerosol  
cleaners. Use a damp cloth for cleaning.  
grounding of the mast and supporting structure, grounding  
of the lead-in wire to an antenna discharge unit, size of  
grounding conductors, location of antenna-discharge unit,  
connection to grounding electrodes, and requirements for  
the grounding electrode. (Fig. A)  
FIGURE A  
ANTENNA  
LEAD  
WIRE  
EXAMPLE OF ANTENNA GROUNDING  
AS PER NATIONAL ELECTRICAL CODE  
GROUND  
CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
EXCEPTION: A product that is meant for uninterrupted  
service and, that for some specific reason, such as the  
possibility of the loss of an authorization code for a CATV  
converter, is not intended to be unplugged by the user for  
cleaning or any other purpose, may exclude the reference  
to unplugging the appliance in the cleaning description  
otherwise required in item 5.  
ELECTRIC  
SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMP  
NEC – NATIONAL ELECTRICAL CODE  
S2898A  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
6. Attachments - Do not use attachments not recommended  
by the video product manufacturer as they may cause  
hazards.  
7. Water and Moisture- Do not use this video product near  
water, for example, near a bath tub, wash bowl, kitchen  
sink, or laundry tub, in a wet basement, or near a  
swimming pool, and the like.  
14. Lightning - For added protection for this video product  
during a lightning storm, or when it is left unattended and  
unused for long periods of time, unplug it from the wall  
outlet and disconnect the antenna or cable system. This  
will prevent damage to the video product due to lightning  
and power-line surges.  
15. Power Lines - An outside antenna system should not be  
located in the vicinity of overhead power lines or other  
electric light or power circuits, or where it can fall into  
such power lines or circuits. When installing an outside  
antenna system, extreme care should be taken to keep  
from touching such power lines or circuits as contact with  
them might be fatal.  
16. Overloading - Do not overload wall outlets and extension  
cords as this can result in a risk of fire or electric shock.  
17. Object and Liquid Entry - Never push objects of any kind  
into this video product through any openings as they may  
touch dangerous voltage points or short-out parts that  
could result in a fire or electric shock. Never spill liquid of  
any kind on the video product.  
18. Servicing - Do not attempt to service this video product  
yourself as opening or removing covers may expose you  
to dangerous voltage or other hazards. Refer all servicing  
to qualified service personnel.  
8. Accessories - Do not place this video product on an  
unstable cart, stand, tripod, bracket, or table. The video  
product may fall, causing serious injury to a child or adult,  
and serious damage to the appliance. Use only with a  
cart, stand, tripod, bracket, or table recommended by the  
manufacturer, or sold with the video product. Any mount-  
ing of the appliance should follow the  
manufacturer's instructions and should  
use a mounting accessory recommended  
by the manufacturer. An appliance and  
cart combination should be moved with  
care. Quick stops, excessive force, and  
uneven surfaces may cause the appli-  
ance and cart combination to overturn.  
9. Ventilation - Slots and openings in the cabinet are pro-  
vided for ventilation and to ensure reliable operation of  
the video product and to protect it from overheating, and  
these openings must not be blocked or covered. The  
openings should never be blocked by placing the video  
product on a bed, sofa, rug, or other similar surface. This  
video product should not be placed in a built-in installa-  
tion such as a bookcase or rack unless proper ventilation  
is provided or the manufacturer's instructions have been  
adhered to.  
19. Damage Requiring Service - Unplug this video product  
from the wall outlet and refer servicing to qualified service  
personnel under the following conditions:  
a. When the power-supply cord or plug is damaged.  
b. If liquid has been spilled, or objects have fallen into the  
video product.  
10. Power Sources - This video product should be operated  
only from the type of power source indicated on the  
marking label. If you are not sure of the type of power  
supply to your home, consult your appliance dealer or  
local power company. For products intended to operate  
from battery power, or other sources, refer to the  
operating instructions.  
c. If the video product has been exposed to rain or water.  
d. If the video product does not operate normally by  
following the operating instructions. Adjust only those  
controls that are covered by the operating instructions  
as an improper adjustment of other controls may result  
in damage and will often require extensive work by a  
qualified technician to restore the video product to its  
normal operation.  
11. Grounding or Polarization - This video product is  
equipped with a polarized alternating-current line plug (a  
plug having one blade wider than the other). This plug  
will fit into the power outlet only one way. This is a safety  
feature. If you are unable to insert the plug fully into the  
outlet, try reversing the plug. If the plug should still fail to  
fit, contact your electrician to replace your obsolete outlet.  
Do not defeat the safety purpose of the polarized plug.  
12. Power Cord Protection - Power supply cords should  
be routed so that they are not likely to be walked on or  
pinched by items placed upon or against them, paying  
particular attention to cords at plugs, convenience recep-  
tacles, and the point where they exit from the appliance.  
1ꢀ. Outdoor Antenna Grounding - If an outside antenna or  
cable system is connected to the video product, be sure  
the antenna or cable system is grounded so as to provide  
some protection against voltage surges and built-up static  
charges. Article 810 of the National Electrical Code, ANSI/  
NFPA No. 70, provides information with regard to proper  
e. If the video product has been dropped or damaged in  
any way.  
f. When the video product exhibits a distinct change in  
performance this indicates a need for service.  
20. Replacement Parts - When replacement parts are  
required, be sure the service technician has used  
replacement parts specified by the manufacturer or have  
the same characteristics as the original part. Unauthorized  
substitutions may result in fire, electric shock or other  
hazards.  
21. Safety Check - Upon completion of any service or repairs  
to this video product, ask the service technician to per-  
form safety checks to determine that the video product is  
in proper operating condition.  
22. Heat - This video product should be situated away from  
heat sources such as radiators, heat registers, stoves, or  
other products (including amplifiers) that produce heat.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Location and Handling  
Symbols Used in This Manual  
Do not stand this unit up vertically. Install this unit in a hori-  
zontal and stable position. Do not place anything directly on  
top of this unit. Do not place this unit directly on top of the TV.  
The following symbols appear in some headings in this  
manual.  
: Description refers to playback or recording of  
video cassette tapes.  
• Depending on the TV, noise or disturbance of the picture  
and/or sound may be generated if this unit is placed too  
close to your TV. In this case, please ensure enough space  
between your TV and this unit.  
:
Description refers to playback of DVD-Video discs.  
• Do not cover or place this unit in enclosed spaces to prevent  
excessive temperature build up.  
: Description refers to playback of Audio CDs.  
Do not place this unit in direct sunlight, or near heat sources.  
• Depending on the environment, the temperature of this unit  
may increase slightly. This is not a malfunction.  
• Keep this unit away from strong magnetic objects.  
• Do not place any object containing water or other liquids on  
this unit. In the event that liquid should enter the cabinet,  
unplug this unit immediately and contact the retailer or an  
Authorized Service Center immediately.  
• Do not remove this unit cabinet. Touching parts inside the  
cabinet could result in electric shock and/or damage to this  
unit. For service and adjustment inside the cabinet, call a  
qualified dealer or an Authorized Service Center.  
• Be sure to remove disc and video tape and unplug the AC  
power cord from the output before carrying this unit.  
Maintenance  
SERVICING  
• Please refer to relevant topics on the “Troubleshooting  
Guide” on page 2ꢀ before returning the product.  
• If this unit becomes inoperative, do not try to correct the  
problem by yourself. There are no user-serviceable parts  
inside. Turn off, unplug the power plug, and please call  
our help line mentioned on the front page to locate an  
Authorized Service Center.  
CLEANING THE CABINET  
• Use a soft cloth slightly moistened with a mild detergent  
solution. Do not use a solution containing alcohol, spirits,  
ammonia or abrasive.  
Avoid the Hazards of Electrical Shock and Fire  
• Do not handle the power cord with wet hands.  
• Do not pull on the power cord when disconnecting it from  
AC wall outlet. Grasp it by the plug.  
CLEANING DISCS  
• When a disc becomes dirty, clean it with a cleaning cloth.  
Wipe the disc from the center to out. Do not wipe in a circu-  
lar motion.  
• If, by accident, water is spilled on this unit, unplug the power  
cord immediately and take the unit to our Authorized Service  
Center for servicing.  
Do not use solvents such as benzine, thinner, commercially avail-  
able cleaners, detergent, abrasive cleaning agents or antistatic  
spray intended for analog records.  
Do not put your fingers or objects into the unit cassette holder.  
Moisture Condensation Warning  
CLEANING THE DISC LENS  
Moisture may form inside this unit under the following condi-  
tions:  
• Immediately after a heater is turned on.  
• In a steamy or humid room.  
• When this unit is suddenly moved from a cold to warm envi-  
ronment.  
• If this unit still does not perform properly although you refer  
to the relevant sections and to “Troubleshooting Guide” in  
this Owner’s Manual, the laser optical pickup unit may be  
dirty. Consult your dealer or an Authorized Service Center  
for inspection and cleaning of the laser optical pickup unit.  
If moisture forms inside this unit, it may not operate  
properly or damage the video tape. In such case, turn on  
the power and wait for more than 2 hours for the moisture to  
evaporate.  
DISC HANDLING  
• When you handle a disc, hold it by its edge and try not to  
touch the surface of the disc.  
• Always store the disc in its protective case when it is not  
used.  
About Copyright  
AUTO HEAD CLEANING  
• Automatically cleans video heads as you insert or remove a  
cassette, so you can see a clear picture.  
Unauthorized copying, broadcasting, public performance and  
lending of discs are prohibited.  
This product incorporates copyright protection technology that  
is protected by U.S. patents and other intellectual property  
rights. Use of this copyright protection technology must be  
authorized by Macrovision, and is intended for home and  
other limited viewing uses only unless otherwise authorized by  
Macrovision. Reverse engineering or disassembly is  
prohibited.  
• Playback picture may become blurred or interrupted while  
the TV program reception is clear. Dirt accumulated on the  
video heads after a long period of use, or the usage of rental  
or worn tapes can cause this problem. If a streaky or snowy  
picture appears during playback, the video heads in your  
unit may need to be cleaned.  
1. Please visit your local Audio/Video store and purchase a  
good quality VHS Video Head Cleaner.  
2. If a Video Head Cleaner does not solve the problem,  
please call our help line mentioned on the front page to  
locate an Authorized Service Center.  
Note to CATV system installer  
This reminder is provided to call the CATV system  
installer’s attention to Article 820-40 of the NEC that  
provides guidelines for proper grounding and, in  
particular, specifies that the cable ground should be  
connected to the grounding system of the building,  
as close to the point of cable entry as practical.  
Hint  
Remember to read the instructions along with the video head cleaner before use.  
• Clean video heads only when problems occur.  
Manufactured under license from Dolby Laboratories.  
“Dolby” and the double-D symbol are trademarks of  
Dolby Laboratories.  
4
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About the Video Cassettes and Discs  
Playable Video Cassettes  
Use only cassettes marked  
with this unit.  
Playable Discs  
Playable  
Mark (logo)  
discs  
Recorded  
signals  
Region code  
Disc size  
Disc types  
DVD-Video  
*1, 2, ꢀ, 5, 9  
or  
DVD-RW  
DVD-R  
*1, ꢀ, 4, 5, 6,  
8, 9, 10  
Example  
12 cm  
or  
8 cm  
Title 1  
Title 2  
Digital video  
(MPEG2)  
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1  
Chapter 2  
DVD+RW  
DVD+R  
*1, ꢀ, 4, 5, 7,  
8, 9, 10  
Audio CD  
*ꢀ, 5, 9  
Audio CD  
Example  
12 cm  
or  
Digital audio  
Track 1  
Track 2  
Track 5  
Track 6  
Track 3  
Track 4  
CD-RW  
CD-R  
8 cm  
*ꢀ, 4, 5, 8, 9  
is a trademark of DVD Format/Logo Licensing Corporation.  
If you cannot play back a disc which bears one of the marks above, check the following notes.  
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back.  
*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc’s producers.  
*ꢀ: Scratched or stained discs may not be played back.  
*4: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or spe-  
cial properties of discs.  
*5: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not play them  
back. Even if they are played back, the sound or video quality will be compromised.  
*6: You may play back the unfinalized DVD-R/RW disc recorded in the video format on our brand’s DVD recorder. However,  
depending on the recording status of a disc, the disc may not be played back at all or normally (the picture or sound may  
not be smooth, etc.). In this case, you need to finalize the disc with the DVD recorder. Refer to the manual accompanying  
the DVD recorder.  
*7: Only the discs recorded in the video format and finalized can be played back.  
Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be played back at  
all the picture or sound may not be smooth, etc.  
*8: If the recorded portion of the disc is too small (less than 2 ꢀ/16 inches (55 mm) across), it may not play back properly.  
*9: Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it correctly.  
*10: Discs Recorded in the VR (Video Recording) format cannot be played back.  
Unplayable Discs  
NEVER play back the following discs. Otherwise, malfunction may result!  
DVD-RAM / DVD-Audio / CD-i / Photo CD / Video CD / DVD with region codes other than 1 or ALL / DVD-ROM for personal  
computers / CD-ROM for personal computers  
On the following disc, the sound MAY NOT be heard.  
Super Audio CD  
NOTE: Only the sound recorded on the normal CD layer can be delivered.The sound recorded on the high density Super Audio  
CD layer cannot be delivered.  
Any other discs without compatibility indications  
5
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
Connections  
Please refer to “Basic TV Connection” on the front page before you use this unit.  
RF Output Channel  
If channel 3 has been already occupied  
for broadcasting,  
5) After a few seconds, press and hold  
[PLAY B] on the unit for ꢀ seconds.  
• The RF output channel will change to  
channel 4 from channel ꢀ and you will  
see a playback picture.  
• When a picture does not appear on the  
TV screen, repeat step 4.  
Hint  
• The RF output channel may not  
change when you adjust tracking dur-  
ing playback. In this case, stop the  
playback, and start the playback again.  
After that, press and hold [PLAY B]  
on the unit for ꢀ seconds again.  
1) Set your TV to channel 4.  
2) Insert a pre-recorded tape into this unit.  
ꢀ) Press [SOURCE] on the unit so that the  
VCR OUTPUT light is lit.  
If noise appears on the TV screen, press  
[VCR/TV] on the remote control.  
6) Press [STOP C] to stop playback.  
4) Press [PLAY B] once.  
Hint for Cable Box or Satellite Box  
To select channels of the cable box or satellite box  
1) Turn on the unit by pressing [STANDBY-ON], then press  
[VCR/TV]. The POWER ON indicator on the front panel  
(Back of DVD/VCR)  
(Cable box or  
Satellite box)  
ANT-IN  
Satellite or  
Cable TV  
signal  
IN  
O
U
T
G
K
H
L
ANT-OUT  
will light, then press [SKIP/CH.  
/
,
/
] to select  
RF cable  
(supplied)  
channel ꢀ or 4 (the same channel as the output channel of  
the cable box or satellite box).  
• If you use the channel 4, you need to change the unit’s  
RF output to channel 4. Refer to “RF Output Channel”.  
2) At the TV, select channel ꢀ or 4 (the same channel as you  
have selected at step 1).  
(Back of TV)  
Select this connection when you want to view or record a  
scrambled channel. With this connection, channels cannot be  
changed on the unit. You can view or record ONLY  
the channels you have selected on the cable box or the  
satellite box.  
ꢀ) On the cable box or satellite box, select the channel you  
want to view or record.  
While you are recording, only the recorded channel can be viewed.  
Connection to an Audio System  
Method 1  
Method 2  
Dolby Digital decoder,  
MD deck or DAT deck  
Stereo system  
Audio  
COAXIAL  
L
R
Digital audio  
input jack  
Analog audio  
input jacks  
Audio Coaxial  
Digital cable  
(commercially  
Audio cable  
(supplied)  
available)  
DVD  
AUDIO S-VIDEO  
OUT OUT  
DVD/VCR  
AUDIO OUT  
VCR  
COMPONENT  
DIGITAL  
VIDEO OUT  
AUDIO OUT  
L
AUDIO OUT  
(Analog)  
R
COAXIAL  
DIGITAL  
AUDIO OUT  
DVD/VCR  
or  
DVD  
SETUP > QUICK>  
DOLBY DIGITAL  
Setting  
COMPONENT  
VIDEO OUT  
DIGITAL  
AUDIO S-VIDEO  
OUT OUT  
AUDIO OUT  
Connection  
L
Connecting to a Dolby Digital decod-  
er for Dolby Digital audio output.  
R
BITSTREAM  
(DVD mode only)  
Connecting to the other equipment  
(an MD deck or DAT deck etc.) with-  
out Dolby Digital decoder.  
PCM  
Hint  
• Playing a DVD using incorrect settings may generate noise distortion and may  
also damage the speaker.  
* To complete these settings, refer to pages 20-21.  
Hint  
• The audio source on a disc in a Dolby Digital Multi channel surround format  
cannot be recorded as digital sound by an MD or DAT deck.  
• By hooking this unit up to a Multi channel Dolby Digital decoder, you can enjoy  
high-quality Dolby Digital Multi channel surround sound as heard in the movie  
theaters.  
• Playing a DVD using incorrect settings may generate noise distortion and may  
also damage the speakers.  
6
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connection to a TV  
Basic Audio  
Method 1  
Method 2  
Method 3  
TV  
AUDIO IN  
L
R
Better picture  
Good picture  
Best picture  
COMPONENT  
VIDEO IN  
Y
S-VIDEO IN  
VIDEO IN  
CB  
Audio cable  
(supplied)  
C
R
S-Video cable  
(commercially  
available)  
Video cable  
(supplied)  
DVD/VCR  
DVD/VCR  
AUDIO OUT  
VCR  
Component Video cable  
(commercially available)  
L
DVD  
DVD/VCR  
AUDIO OUT  
VCR  
COMPONENT  
VIDEO OUT  
DIGITAL  
AUDIO S-VIDEO  
AUDIO OUT  
OUT  
OUT  
I
Y
L
AUDIO IN  
VIDEO IN  
L
R
C
B
R
R
COAXIAL  
VIDEO OUT  
R
C
DVD  
AUDIO S-VIDEO  
OUT OUT  
DVD/VCR  
VCR  
DVD  
AUDIO S-VIDEO  
OUT OUT  
COMPONENT  
COMPONENT  
VIDEO OUT  
VIDEO OUT  
A
or  
Y
DVD  
AUDIO S-VIDEO  
OUT OUT  
E  
DIGITAL  
AUDIO OUT  
C
C
B
R
VIDEO OUT  
L
R
AUDIO OUT  
(Analog)  
VIDEO OUT  
S-VIDEO OUT  
COMPONENT VIDEO OUT  
Hint  
• Connect this unit directly to the TV. If the Audio/Video cables are connected to a VCR, pictures may be distorted due to the copy protection system.  
• The COAXIAL, DVD AUDIO OUT, S-VIDEO OUT and COMPONENT VIDEO OUT jacks are only useful in DVD mode.  
After you have completed connections  
Press the input selector button (usually TV/VIDEO, INPUT or AUX) on your TV to switch an appropriate external input channel  
(usually near channel 0) for viewing the picture from this unit. If the picture does not appear, also refer to the manual accompa-  
nying your TV.  
INPUT MODES FOR COMMON TV BRANDS  
Listed below are inputs for common brand name TV’s.  
Admiral:  
Curtis Mathis:  
GE:  
AUX  
Panasonic:  
RCA:  
Samsung:  
Sanyo:  
Sharp:  
Sony:  
Toshiba:  
Zenith:  
TV/VIDEO  
LINE1, LINE2, 00, 90, 91, 92, 9ꢀ  
INPUT, TV/VCR, 00, 90, 91, 92, 9ꢀ  
INPUT, TV/VCR, 00, 90, 91, 92, 9ꢀ  
TV/VIDEO  
Hitachi:  
INPUT, AUX  
VIDEO  
JVC:  
VIDEO, VIDEO1, VIDEO2, VIDEOꢀ  
00  
Kenwood:  
LXI-Series:  
Magnavox:  
AUX  
00  
AUX CHANNEL  
VIDEO1, VIDEO2, VIDEOꢀ  
TV/GAME  
00  
7
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation for Use  
To Preset the Channel Again  
1) Press [MENU] until the main menu appears.  
2) Select “CHANNEL SET UP” by using [K//L], then press [B]  
ꢀ) Select “AUTO SET UP” by using [K//L], then press [B]. After  
Turn On the Unit for the First Time  
VCR  
Operation described in this manual are  
mainly based on the remote control.  
.
Turn on the TV and set it to channel ꢀ.  
• If channel ꢀ has been already occupied for broadcasting,  
see “RF Output Channel” section on page 6.  
scanning, the tuner stops on the lowest memorized channel.  
1
2
To Change the On-Screen Language  
1) Press [MENU] until the main menu appears.  
2) Select “LANGUAGE SELECT” by using [K/L], then  
press [B].  
ꢀ) Select ENGLISH” , “FRANCAISor ESPAÑOLby  
using [K/L] then press [CLEAR/C.RESET].  
Select your language in the first time you turn on this unit.  
LANGUAGE SELECT  
Then press [B] to go to next step.  
B ENGLISH  
FRANCAIS  
ESPAÑOL  
[ON]  
STANDBY-ON  
or  
Hint  
CH 01  
Press [B] to start Auto Set Up.  
3
• If you accidentally select Spanish or French and need English: Press [MENU]  
and choose SELEC. IDIOMA or SELECTION LANGUE. Press [B] and select  
ENGLISH. Finally, press [CLEAR/C.RESET].  
• To add or delete channels in this unit, [SKIP/CH. G/K, H/L] button works  
on the channel number memorized in this unit, [K/L] works on all.  
AUTO SET UP  
Do you connect the cable from the cable box or the satellite box to the unit’s  
ANT-IN jack?  
Clock Setup  
YES  
NO  
VCR  
Yes Press [MENU] to exit.  
• Refer to “Hint for Cable Box or Satellite Box” section on page 6.  
Press [MENU] and select “CLOCK SET”.  
Then press [B] to go to next step.  
1
- M E N U -  
No Please wait for a few minutes. After scanning...  
TIMER PROGRAMMING  
AUTO REPEAT  
CHANNEL SET UP  
B CLOCK SET  
[OFF]  
• The tuner stops on the lowest memorized channel.  
MENU  
• You can select only the channels memorized in this unit by using  
[SKIP/CH. G//K, H//L] (or [CHANNEL K///L]).  
LANGUAGE SELECT  
or  
• If “AUTO SET UP” appears on the TV screen again, check the cable  
• If the clock is not set, the CLOCK SET screen appears when you press  
connections. Then, press [B] once again.  
[MENU]. In this case, go to step 2.  
Hint  
CLOCK SET  
Select the current month.  
Then press [B] to go to next step.  
• Repeat these steps only if either there was a power failure or this unit has been  
unplugged for more than ꢀ0 seconds.  
2
3
MONTH DAY  
1 0 – –  
YEAR  
– – – –  
/
HOUR MINUTE AM/PM  
– –  
:
– –  
– –  
To Select a Channel  
or  
You can select a channel by using the Number buttons or  
[
SKIP/CH.  
G/K  
,
H
/
L].  
CLOCK SET  
Select the current day.  
Then press [B] to go to next step.  
MONTH DAY  
1 0 0 2  
YEAR  
– – – –  
Notes for using the Number buttons:  
/
• When selecting cable channels which are higher than 99,  
enter channel numbers as a three-digit number. (for exam-  
ple: 117, press [1], [1], [7])  
• You must precede single-digit channel numbers with a zero.  
(for example: 02, 0ꢀ, 04 and so on)  
HOUR MINUTE AM/PM  
– –  
:
– –  
– –  
or  
CLOCK SET  
Select the current year.  
Then press [B] to go to next step.  
4
5
MONTH DAY  
1 0 0 2  
YEAR  
2 0 0 6  
/
HOUR MINUTE AM/PM  
– –  
:
– –  
– –  
or  
To Add or Delete Channels  
Press [MENU] to select “CHANNEL SET UP”.  
Select the current hour.  
Then press [B] to go to next step.  
CLOCK SET  
1
- M E N U -  
Then press [B] to go to next step.  
TIMER PROGRAMMING  
MONTH DAY  
1 0  
YEAR  
/
0 2 MON 2 0 0 6  
AUTO REPEAT  
B CHANNEL SET UP  
CLOCK SET  
[OFF]  
HOUR MINUTE AM/PM  
MENU  
0 5  
:
– –  
– –  
or  
LANGUAGE SELECT  
or  
CLOCK SET  
• If the clock is not set, the “CLOCK SET” screen appears when you press  
Select the current minute.  
Then press [B] to go to next step.  
6
7
8
MONTH DAY  
1 0  
YEAR  
[MENU]. In this case, press [MENU] again.  
/
0 2 MON 2 0 0 6  
HOUR MINUTE AM/PM  
CHANNEL SET UP  
Select “MANUAL SET UP”.  
0 5  
:
4 0  
– –  
2
3
4
5
or  
AUTO SET UP  
Then press [B] to go to next step.  
B MANUAL SET UP  
or  
CLOCK SET  
Select “AM” or “PM”.  
MONTH DAY  
1 0  
YEAR  
/
0 2 MON 2 0 0 6  
MANUAL SET UP  
or  
HOUR MINUTE AM/PM  
Select the channel to be added or deleted.  
0 5  
:
4 0  
P M AM  
B PM  
CHANNEL ꢀ0 (CATV)  
ADD  
or  
or  
or  
To exit the CLOCK SET screen  
MANUAL SET UP  
Select “ADD” or “DELETE”.  
CHANNEL ꢀ0 (CATV)  
DELETE  
or  
Hint  
• To go back one step, press [s] (during steps 2 to 7).  
• Your clock setting will be lost if either there is a power failure or this unit has  
been unplugged for more than ꢀ0 seconds.  
CLEAR/  
C. RESET  
To exit the menu  
8
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function Overview  
Front Panel Indicator  
Lights up when the disc is inserted.  
Lights up when this unit  
Lights up when the inserted  
disc is being played back.  
Blinks when an unacceptable  
disc is inserted.  
Lights up during a recording.  
Blinks when a recording is paused.  
is in the DVD mode.  
STANDBY-ON  
OPEN/CLOSE  
POWER ON  
REC  
F.FWD STOP/EJECT PLAY  
TIMER REC  
RECORD  
VCR  
DVD  
DISC IN PLAY  
STOP PLAY NEXT  
REW  
CHANNEL  
SOURCE  
PREV  
VIDEO  
AUDIO  
IR  
Lights up when this unit is in the VCR mode.  
Lights up when power is on.  
Lights up when the Timer Recording  
or an OTR recording has been set.  
VCR / DVD Switching  
You must select which component you wish to operate with  
[SOURCE] at first, as this product is a combination of a VCR  
and a DVD player.  
OPEN/CLOSE  
/EJECT  
OPEN/CLOSE  
STANDBY-ON  
SPEED  
AUDIO  
VCR  
DVD  
DISC IN PLAY  
STOP PLAY NEXT  
1
4
7
2
5
8
3
6
9
CHANNEL  
SOURCE  
REV  
SKIP/CH.  
VCR/TV  
SLOW  
VCR MODE  
Press [VCR] on the remote control.  
(Verify that the VCR OUTPUT light is lit.)  
0
VCR  
+10  
DVD  
VCR button  
DVD button  
DISPLAY  
PAUSE  
PLAY  
STOP  
DVD MODE  
RECORD  
MENU  
Press [DVD] on the remote control.  
VCR  
DVD  
ENTER  
(Verify that the DVD OUTPUT light is lit.)  
DVD OUTPUT  
light  
SETUP TOP MENU  
RETURN  
SOURCE  
SEARCH  
MODE  
CLEAR/  
C. RESET  
MODE  
ZOOM  
SUBTITLE  
T-SET  
Hint  
ANGLE  
REPEAT  
A-B  
SOURCE button  
• Pressing only [SOURCE] on the front panel DOES NOT switch the mode of the  
remote control. You MUST select the correct mode on the remote control.  
VCR OUTPUT light  
Front & Rear Terminals  
POWER ON  
2
3
DVD/VCR  
VCR  
REC  
TIMER REC  
DVD  
ANT-IN  
COMPONENT  
VIDEO OUT  
AUDIO OUT  
DIGITAL  
AUDIO S-VIDEO  
VCR  
REW  
F.FWD STOP/EJECT PLAY  
RECORD  
VIDEO  
AUDIO  
OUT  
OUT  
AUDIO OUT  
ANT-IN  
Y
L
4
O IN  
AUDIO IN  
VIDEO IN  
L
IDEO IN  
ANT-OUT  
R
1
10  
9
C
B
R
ANT-OUT  
COAXIAL  
VIDEO OUT  
R
C
6
3
[Front Panel]  
[Rear Panel]  
8 7  
6
5
6: VIDEO IN jack  
1: DVD AUDIO OUT (analog) jacks  
Connect a cable coming from the video out jack of a camcorder, another VCR or  
an audio-visual source (laser disc player, video disc player, etc.) here.  
Connect the supplied audio cable here through the audio in jacks of a television  
or other audio equipment. (DVD only)  
7: DVD/VCR VIDEO OUT jack  
2: DVD/VCR AUDIO OUT jacks  
Connect the supplied video cable here through the TV’s video in jack.  
8: COMPONENT VIDEO OUT jacks  
Connect optional COMPONENT VIDEO cables here through the COMPONENT  
VIDEO in jacks of a television. (DVD only)  
9: S-VIDEO OUT jack  
Connect the supplied audio cable here through the audio in jacks of a television  
or other audio equipment.  
3: AUDIO IN jack  
Connect audio cable coming from the audio out jack of a camcorder, another  
VCR or an audio source here.  
4: ANT-IN jack  
Connect your antenna or cable box here.  
Connect an optional S-VIDEO cable here through the S-VIDEO in jack of a tel-  
evision. (DVD only)  
10: DIGITAL AUDIO OUT COAXIAL jack  
5: ANT-OUT jack  
Connect an optional coaxial digital audio cable here through the coaxial digital  
audio in jack of a decoder or audio receiver. (DVD only)  
Connect the supplied RF cable to the antenna input jack on your TV.  
9
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
DVD mode  
VCR mode  
Disc/Tape  
OPEN/CLOSE  
/EJECT  
Button  
STANDBY-ON  
SPEED  
AUDIO  
(Alphabetical order)  
1
4
7
2
5
8
0
3
6
To select channel.  
The +10 button has no  
effect in VCR mode.  
1
4
7
2
5
8
3
6
9
To select chapter or title  
To select track directly.  
SKIP/CH.  
9
directly.  
+10  
VCR/TV  
SLOW  
To search forward/backward  
through a disc.  
To begin slow forward/reverse through a disc.  
playback in the pause mode.  
To search forward/backward  
0
VCR  
+10  
DVD  
To forward/backward a tape.  
DISPLAY  
PAUSE  
A-B  
To repeat between your  
chosen point A and B.  
To repeat between your cho-  
sen point A and B.  
PLAY  
ANGLE  
AUDIO  
STOP  
To select camera angles on  
a disc.  
RECORD  
MENU  
To select audio languages  
on a disc.  
To select STEREO,  
L-ch or R-ch.  
ENTER  
SETUP TOP MENU  
RETURN  
To clear the markers.  
To clear the markers.  
To clear the numbers  
entered incorrectly.  
To cancel the point for A-B  
repeat.  
To remove status number in  
program input.  
To clear the numbers  
entered incorrectly.  
To cancel the point for A-B  
repeat.  
SEARCH  
MODE  
CLEAR/  
MODE  
ZOOM  
C. RESET  
CLEAR/  
C. RESET  
To exit the VCR Menu.  
SUBTITLE  
T-SET  
ANGLE  
REPEAT  
A-B  
To reset the tape counter.  
DISPLAY  
To display the current disc  
mode.  
To display the current disc  
mode.  
To display the current time,  
tape counter, and channel.  
To select the DVD output mode.  
To select the DVD output mode.  
DVD  
To activate the remote  
control in DVD mode.  
To activate the remote  
control in DVD mode.  
To select an item  
on the VCR Menu.  
To advance to the  
next VCR Menu.  
To go back one  
step during clock  
and timer setting.  
ENTER  
To move the cursor and  
determine its position.  
To move the cursor and  
determine its position.  
Installing the Batteries for  
the Remote Control  
MENU  
Install two AA batteries (supplied)  
matching the polarity indicated inside  
battery compartment of the remote  
control.  
To call up the Menu on a disc.  
To call up the VCR Menu.  
To set black level on/off.  
To set virtual surround  
on/off.  
To arrange the playing order  
or play randomly.  
MODE  
To set virtual surround on/off.  
OPEN/CLOSE  
/EJECT  
To open or close the disc  
tray.  
To open or close the disc  
tray.  
To eject the video  
cassette from the VCR.  
1
2
3
To pause tape playback or  
recording.  
To advance playback one  
frame at a time.  
To pause disc playback.  
To advance playback one  
frame at a time.  
PAUSE  
To pause disc playback.  
To begin disc playback.  
To begin disc playback.  
To begin tape playback.  
PLAY  
RECORD  
To start a recording or One  
Touch Recording.  
Keep in mind the following when using  
the remote control:  
REPEAT  
To play a chapter or title  
repeatedly.  
To play a track or disc  
repeatedly.  
Make sure that there is no obstacle  
between the remote control and the  
remote sensor on the unit.  
RETURN  
To return to the previous  
operation in menu.  
To return to the previous  
operation in menu.  
SEARCH  
MODE  
To search chapter, title or  
time.  
To search track.  
To search time.  
• The maximum operable ranges from  
the unit are as follows.  
- Line of sight: approx. 2ꢀ feet (7m)  
- Either side of center:  
approx. 16 feet (5m) within ꢀ0°  
- Above: approx. 16 feet (5m) within 15°  
- Below: approx. 10 feet (ꢀm) within ꢀ0°  
To call up the index or time  
search menu.  
To set or search the markers.  
To set or search the markers.  
SETUP  
To call up the DVD setup  
menu.  
To call up the DVD setup  
menu.  
To change channels.  
To adjust the tracking  
manually during playback.  
SKIP/CH.  
SKIP/CH.  
To skip chapters or titles.  
To skip tracks.  
SLOW  
• To view the tape in slow  
motion.  
SPEED  
To select the recording  
speed.  
STANDBY-ON  
To turn the unit on/off.  
To turn the unit on/off.  
To stop playback.  
To turn the unit on/off.  
To stop playback or  
recording.  
STOP  
To stop playback.  
SUBTITLE  
T-SET  
To put the VCR into standby  
mode for a Timer Recording.  
To select subtitles on a disc.  
Hint  
TOP MENU  
To call up the Top Menu on  
a disc.  
• Do not mix alkaline and manganese bat-  
teries.  
• Do not mix old and new batteries.  
To select the VCR output mode.  
VCR  
To activate the remote  
control in VCR mode.  
VCR/TV  
To select DVD position or  
TV position.  
To select CD position or TV To select VCR position or  
position. TV position.  
ZOOM  
To magnify part of a picture.  
(x2/x4)  
10  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR Functions  
Playback  
Before:  
Turn on the TV and set it to channel ꢀ.  
• If channel ꢀ has been already occupied for broadcasting, see “RF Output Channel” section on page 6.  
VCR  
Hint  
4
1
• When a tape with-  
out record tab is  
inserted, the unit  
will start playback  
automatically.  
1 Insert a video cas-  
2
4
To start playback  
OPEN/CLOSE  
/EJECT  
STANDBY-ON  
SPEED  
AUDIO  
sette into this unit.  
STANDBY-ON  
POWER ON  
1
4
7
2
5
8
3
6
9
PLAY  
SKIP/CH.  
• Tracking will be  
automatically  
REC  
TIMER REC  
RECORD  
VCR/TV  
SLOW  
REW  
F.FWD STOP/EJECT PLAY  
VIDEO  
AUDIO  
IR  
adjusted upon play-  
back. To adjust the  
tracking manually,  
press [SKIP/CH.  
G/K, H/L] (or  
0
VCR  
+10  
DVD  
DISPLAY  
PAUSE  
3
To stop playback  
To eject the cassette  
OPEN/CLOSE  
/EJECT  
STOP  
PLAY  
3 2  
4
2
STOP  
[
CHANNEL  
K/L]).  
3
Other Operations  
To cue or review picture during playback (Picture Search)  
Counter Reset  
Press [CLEAR/C.RESET].  
To play back in slow motion (Slow mode)  
Press [SLOW] during playback or the still mode.  
• If the noise bars appear on the TV screen, you can reduce it  
Use [g] or [h ]([F.FWD g] or [REW h]).  
• Press it again and the unit will search in super high speed.  
(in the SLP mode only)  
To freeze the picture on TV screen during playback (Still mode)  
Press [PAUSE F]. Each time you press the button, the pic-  
ture will be forwarded by one frame.  
by using [SKIP/CH. G/K, H/L] (or [CHANNEL  
K/L]).  
Auto Rewind  
If the picture begins to vibrate vertically in the still mode,  
stabilize the picture by using [SKIP/CH. G/K, H/L] (or  
When a tape reaches its end during playback, fast-forward  
or recording (except Timer Recording and One Touch  
Recording), the tape will automatically rewind to the beginning.  
After rewinding finishes, the unit will eject the tape.  
[
CHANNEL  
K/L]).  
• If the picture is distorted or rolling vertically, adjust the verti-  
cal hold control on your TV if equipped.  
Hint  
• Still/Slow mode will be automatically cancelled after 5 minutes to prevent damage to the tape and the video head.  
• To return to playback from the Picture Search/Still/Slow mode, press [PLAY B].  
Index Search  
Time Search  
You can skip the program backward and forward by the Index  
Mark.  
You can search backward and forward a specific length of  
time on a tape.  
VCR  
VCR  
• Insert a tape into this unit.  
• Insert a tape into this unit.  
Press [SEARCH MODE] once.  
Press [SEARCH MODE] twice.  
1
1
SEARCH  
SEARCH  
MODE  
MODE  
TIME SEARCH  
INDEX SEARCH  
– : – –  
– –  
Select the desired length of time for fast forwarding or  
To select Index Mark  
2
2
rewinding.  
INDEX SEARCH  
0 ꢀ  
TIME SEARCH  
2 : 5 0  
or  
01 ~ 20  
or  
CURRENT PROGRAM  
0:01~ 9:59  
Beginning  
of the tape  
End of  
the tape  
(1 minute~9 hours and 59 minutes)  
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5  
02  
01  
01  
02  
03  
To rewind  
3
INDEX MARK  
ss  
To rewind  
3
4
ss  
To fast forward  
BB  
To fast forward  
BB  
After searching, it automatically starts playback.  
4
PLAYB  
After searching, it automatically  
starts playback.  
PLAYB  
Hint for Index Search & Time Search  
• These functions are not available during recording.  
• Press [STOP C] to stop the search.  
• If a tape ends during a search, your search will be cancelled and the tape will  
rewind to the beginning.  
Hint  
• The Index Mark will be made automatically at the beginning of each recording.  
• The time gap between Index Marks should be greater then 1 minute for SP  
mode, 2 minutes for LP mode and ꢀ minutes for SLP mode.  
11  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Repeat  
This function will playback a tape repeatedly from the beginning when the tape reaches the end.  
VCR  
Press [B] for  
“AUTO REPEAT”, “ON” or “OFF”.  
- M E N U -  
- M E N U -  
Press [MENU], and choose  
“AUTO REPEAT” during playback.  
2
1
TIMER PROGRAMMING  
TIMER PROGRAMMING  
B AUTO REPEAT  
CHANNEL SET UP  
CLOCK SET  
[OFF]  
B AUTO REPEAT  
[ON]  
CHANNEL SET UP  
CLOCK SET  
MENU  
LANGUAGE SELECT  
LANGUAGE SELECT  
or  
Hint  
• To cancel Auto Repeat, follow step 1 above. Then, press [B] so that “OFF” appears beside “AUTO REPEAT”. Press [CLEAR/C.RESET] to exit.  
• If menu remains on the TV screen after step 2, press [CLEAR/C.RESET] to exit.  
• The Auto Repeat playback will start automatically if you select “AUTO REPEAT” to “ON” in the stop mode.  
Recording  
Recording & OTR (One Touch Recording)  
Before: Turn on the TV and set it to channel ꢀ.  
• If channel ꢀ has been already occupied for broadcasting,  
see “RF Output Channel” section on page 6.  
3
6
1
2
OPEN/CLOSE  
/EJECT  
STANDBY-ON  
POWER ON  
OPEN/CLOSE  
STANDBY-ON  
SPEED  
AUDIO  
VCR  
1
4
7
2
5
8
3
6
9
REC  
F.FWD STOP/EJECT PLAY  
TIMER REC  
RECORD  
VCR  
DVD  
DISC  
STOP  
SKIP/CH.  
REW  
CHANNEL  
SOURCE  
PREV  
VIDEO  
AUDIO  
IR  
1
3
Insert a cassette with 2 Select the channel  
tab into this unit. to record.  
VCR/TV  
SLOW  
2
1
4
7
2
5
8
0
3
6
9
0
VCR  
+10  
DVD  
DISPLAY  
PAUSE  
SKIP/CH.  
or  
5 6 4  
Accidental erasure prevention  
To prevent accidental recording on a recorded  
cassette, remove its record tab. To record on  
it later, cover the hole with adhesive tape.  
PLAY  
STOP  
5
4
RECORD  
MENU  
Press [SPEED] to select the desired tape speed.  
ENTER  
SPEED  
SETUP TOP MENU  
RETURN  
Record tab  
Tape Speed  
Type of tape  
SP mode  
Recording/Playback Time  
T60  
T120  
2hours  
6hours  
T160  
1hour  
3hours  
2-2/3hours  
8hours  
SP  
You CAN NOT dub a DVD to a videotape.  
SLP mode  
To stop recording temporarily (Pause mode)  
Press [PAUSE F].  
4 Press [RECORD] repeatedly to select the  
desired recording length.  
• During the rec-pause mode, five  
C
marks appear on the TV screen. Each  
C
RECORD  
mark represents one minute.  
• Press it again to resume recording.  
REC  
OTR(0:30)  
OTR(1:00).....  
(Normal recording)  
REC  
OTR(8:00)  
OTR(7:30)  
• Pause mode will be automatically cancelled after 5 minutes to prevent damage  
to the tape and the video head.  
5 To stop recording  
6 To eject the  
Hint  
recorded cassette  
OPEN/CLOSE  
/EJECT  
• If you want to watch one channel while recording another...  
1) Press [VCR/TV] to put the unit in TV position.  
STOP  
2) Select a channel you want to watch with the cable box or the satellite box.  
Timer Recording  
VCR  
Select the desired date.  
Then press [B] to go to next step.  
Insert a tape with its record tab into the unit.  
4
5
Press [MENU], then select “TIMER PROGRAMMING”.  
ONE TIME PROGRAM  
PROGRAM NUMBER  
1
or  
- M E N U -  
TIMER PROGRAMMING  
1
DATE  
1 0 / 2 ꢀ MON  
B TIMER PROGRAMMING  
PROG  
DATE  
START TIME  
END TIME  
CHANNEL  
REC SPEED  
12ꢀ45678  
MENU  
START TIME – – : – – – –  
END TIME – – : – – – –  
AUTO REPEAT  
CHANNEL SET UP  
CLOCK SET  
[OFF]  
CHANNEL  
– –  
LANGUAGE SELECT  
REC SPEED – –  
or  
Available program number flashes.  
• You can set a program one year in advance.  
Select an empty program number.  
Then press [B] to go to next step.  
PROGRAM NUMBER  
DATE – – / – –  
1
2
3
Select the desired start time (hour).  
Then press [B] to go to next step.  
START TIME – – : – – – –  
END TIME – – : – – – –  
CHANNEL  
– –  
REC SPEED – –  
or  
ONE TIME PROGRAM  
PROGRAM NUMBER  
or  
1
DATE  
1 0 / 2 ꢀ MON  
START TIME 0 7 : ꢀ 0 – –  
END TIME – – : – – – –  
Select “ONCE”, “DAILY” (Mon-Fri), or “WEEKLY”.  
CHANNEL  
– –  
PROGRAM NUMBER  
1
Then press [B] to go to next step.  
REC SPEED – –  
B
ONCE  
DAILY  
WEEKLY  
or  
or  
12  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Select “AM” or “PM”.  
Then press [B] to go to next step.  
Press [SUBTITLE/T-SET] to set timer standby mode.  
6
10  
SUBTITLE  
ONE TIME PROGRAM  
PROGRAM NUMBER  
T-SET  
1
DATE  
1 0 / 2 ꢀ MON  
START TIME 0 7 : ꢀ 0 PM  
END TIME – – : – – – –  
or  
CHANNEL  
– –  
• TIMER REC indicator on the front panel lights up. The unit will change  
to the DVD mode.  
REC SPEED – –  
AM  
B PM  
Hint  
Repeat the procedure in steps 5 and 6 to set the end time.  
• To go back one step, press [s] during steps ꢀ to 9.  
7
8
To Check, Correct or Cancel a Timer Program  
1) Press [SUBTITLE/T-SET] then, [VCR] on the remote  
Select the desired channel.  
Then press [B] to go to next step.  
ONE TIME PROGRAM  
control.  
PROGRAM NUMBER  
1
2) Select main menu by pressing [MENU]  
ꢀ) Select “TIMER PROGRAMMING” by using [K/L], then  
press [B].  
.
DATE 1 0 / 2 ꢀ MON  
START TIME 0 7 : ꢀ 0 PM  
END TIME 0 8 : ꢀ 0 PM  
or  
CHANNEL  
1 6  
REC SPEED – –  
4) Select the program number which you want to check by  
using [K/L]. The details of the program you selected will  
appear on the TV screen.  
If you have connected the unit to a cable box or satel-  
lite box as the connection on page 6, select the VCR to  
channel 3 or 4 (the RF output channel of the VCR). Then,  
select the desired channel at the cable box or satellite box.  
Leave the cable box or satellite box on for Timer Recording.  
Go to the digit you want to change by using [s/B].  
Then, enter correct numbers by using [K/L].  
You may cancel the entire program by pressing [s]  
while the program number blinks.  
Select the desired recording speed, then press  
9
5) Press [CLEAR/C.RESET] to exit.  
6) Press [SUBTITLE/T-SET] to return to timer standby  
mode.  
[CLEAR/C.RESET].  
ONE TIME PROGRAM  
PROGRAM NUMBER  
DATE  
1
CLEAR/  
C. RESET  
1 0 / 2 ꢀ MON  
START TIME 0 7 : ꢀ 0 PM  
END TIME 0 8 : ꢀ 0 PM  
or  
CHANNEL  
1 6  
REC SPEED SP  
To cancel a Timer Recording in progress  
B SP  
SLP  
Press [STOP/EJECT  
C
A] on the unit.  
• To set another program after step 9, press [  
B].  
Then, continue with step 2.  
Hints for OTR and Timer Recording  
Press [VCR] on the remote control before you set Timer Recording. Make sure the remote control is in the VCR  
mode, then press [SUBTITLE/T-SET].  
• If a tape is not in the unit or does not have the record tab, TIMER REC indicator on the front panel blinks and Timer  
Recording cannot be performed. Please insert a recordable tape.  
• When Timer Recordings are set, TIMER REC indicator on the front panel lights up. To use the VCR as usual until the time  
for the recording, press [SUBTITLE/T-SET] so that TIMER REC indicator lights off. Press [VCR/TV] to choose the VCR  
position. Select either VCR or DVD mode, then continue with the other features as described in this manual.  
After an OTR or a Timer Recording has been set, this unit operates as follows:  
• If a tape runs out before an OTR or a Timer Recording is finished, the unit ejects the tape. Press [SUBTITLE/T-SET] on the  
remote control or [STOP/EJECT  
C
A] on the unit, then press [VCR] to activate the VCR function again.  
• Once the unit turns to the timer standby mode, no VCR functions are available until [SUBTITLE/T-SET] is pressed.  
• To cancel the timer standby mode, press [SUBTITLE/T-SET] on the remote control or [STOP/EJECT  
C
A] on the unit, then  
press [VCR] to activate the VCR function again.  
• The mode of the unit and the remote control may differ (VCR mode or DVD mode) when you set Timer Recording or after  
you cancelled Timer Recording. Press [VCR] or [DVD] on the remote control to select your desired mode before you  
operate.  
When an OTR or a Timer Recording is completed...  
• If Auto Power Off for DVD has been activated and there are Timer Recordings on standby, the unit turns off automatically,  
and TIMER REC indicator on the front panel lights to indicate the unit is in the timer standby mode.  
• TIMER REC indicator on the front panel flashes if there are no more Timer Recordings on standby.  
• If Auto Power Off for DVD has NOT been activated, the unit switches to the DVD mode and all the VCR functions will be  
unavailable. All the DVD functions are available during OTR, timer standby mode and Timer Recording.  
Press [STOP/EJECT  
C
A] on the front panel or [SUBTITLE/T-SET] on the remote control to use the VCR when the unit is  
on.  
• Press [OUTPUT] on the front panel or [VCR] on the remote control to use the VCR when the unit is off. In case Timer  
Recording is in standby mode, press [STOP/EJECT A] on the front panel or [SUBTITLE/T-SET] on the remote control,  
C
and then press [OUTPUT] on the front panel or [VCR] on the remote control.  
If you want to use the DVD player during a Timer Recording or while TIMER REC indicator on the front panel is on or blinking.  
• Press [STANDBY-ON] to turn on the unit. Press [DVD] on the remote control to choose DVD mode, then continue with the  
other DVD features as described in this manual.  
NOTE (for Timer Recording) :  
• If there is a power failure or the unit is unplugged for more than ꢀ0 seconds, clock and all timer settings will be lost.  
1ꢀ  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Copying a Video Tape  
Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws.  
(Back of TV)  
(Back of another source)  
(Back of DVD/VCR*)  
DVD/VCR  
AUDIO OUT  
VCR  
2
AUDIO OUT  
1
or  
ANT-IN  
L
Connect  
AUDIO IN  
VIDEO IN  
Connect  
R
VIDEO OUT
I
VIDEO OUT  
ANT-OUT  
RF cable  
(supplied)  
*Front input jacks are also available  
Audio/Video cables  
(commercially available)  
7) To stop recording, press [STOP/EJECT  
C
A] on the  
1) Insert a pre-recorded tape into another VCR for playing.  
recording unit, then stop playback of the tape in another  
source.  
2) Insert a tape with its record tab into this unit for recording.  
ꢀ) Press [SPEED] on the remote control of the recording  
unit to select the desired recording speed (SP/SLP).  
4) Select the “L1” or “L2” position on the recording unit.  
Hint  
• For best results during dubbing, use the front panel controls whenever pos-  
sible. The remote control might affect another source’s operation.  
• To use the input jacks on the back of this unit, select  
“L1” position by pressing [0], [0], [1] on the remote  
• Always use video-quality shielded cables with RCA-type connectors. Standard  
audio cables are not recommended.  
control or [CHANNEL  
K
/
L]  
on this unit.  
• To use the input jacks on the front of this unit, select  
• You can use a video disc player, satellite receiver or other audio/video  
component with Audio / Video outputs.  
• “L1” or “L2” is found before the lowest memorized channel. (Example: CH02)  
• “L2” input jacks are on the front of this unit.  
“L2” position by pressing [0], [0], [2] on the remote  
control or [CHANNEL  
K/L] on this unit.  
5) Press [RECORD] on the recording unit.  
6) Begin playback of the tape in another source.  
14  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Functions  
Playback  
Before: Turn on the TV, amplifier and  
any other components which are  
connected to this unit. Make sure the  
TV and audio receiver (commercially  
available) are set to the correct channel.  
DVD  
2
OPEN/CLOSE  
STANDBY-ON  
/EJECT  
SPEED  
AUDIO  
1
1
1
4
7
2
5
8
3
6
9
STANDBY-ON  
POWER ON  
OPEN/CLOSE  
SKIP/CH.  
VCR/TV  
SLOW  
REC  
F.FWD STOP/EJECT PLAY  
TIMER REC  
RECORD  
VCR  
DVD  
DISC IN PLAY  
STOP PLAY NEXT  
REW  
CHANNEL  
SOURCE  
PREV  
VIDEO  
AUDIO  
IR  
0
VCR  
+10  
DVD  
DISPLAY  
PAUSE  
Insert a disc with  
1
3
2
4
label facing up.  
3
4
PLAY  
OPEN/CLOSE  
/EJECT  
STANDBY-ON  
STOP  
1
1
4 3  
Hint  
• A “prohibited icon” may appear at the top-right on the TV screen when the operation is prohibited  
by the disc or this unit.  
To start  
playback  
To stop  
playback  
• Some DVDs may be played from title 2 or ꢀ due to specific programs.  
During the playback of a two-layered disc, pictures may stop for a moment. This happens while the 1st  
layer is being switched to the 2nd layer. This is not a malfunction.  
STOP  
PLAY  
TIP:  
You can change the on-screen language for DVD function in “PLAYER MENU” setting. (Refer to page 20.)  
DVD menu  
Fast Forward / Reverse Search  
DVD  
Some discs contain menus which allow you to customize  
DVD playback. Press [K / L / s / B ] to select an item, then  
press [ENTER] (or [PLAY B]).  
E
1
Press [h] or [g] repeatedly during playback  
to select the required forward or reverse speed.  
To continue playback, press [PLAY B].  
Calling up a Menu Screen during Playback  
• Press [MENU] to call up the DVD menu.  
• Press [TOP MENU] to call up the title menu.  
Hint  
• For DVDs, fast forward or reverse search speed is different depending on the  
disc. Approximate speed is 1(x2), 2(x8), ꢀ(x20), 4(x50), 5(x100).  
Hint  
• For Audio CDs, approximate speed is 1(x2), 2(x8), ꢀ(xꢀ0).  
• Menu operations may vary depending on the disc. Refer to the manual  
accompanying the disc for details.  
Slow Forward / Reverse  
Resume  
DVD  
DVD  
1
Press [h] or [g] repeatedly in the pause  
mode to select the required forward or reverse  
speed.  
Press [STOP C] during playback.  
Resume message will appear on  
Resume ON  
the TV screen.  
Press [PLAY B], playback will  
resume from the point at which  
playback was stopped.  
To continue playback, press [PLAY B].  
Press 'PLAY' to play from here.  
To play the beginning,  
press 'STOP' first and then 'PLAY'.  
Hint  
• Slow forward or reverse speed is different depending on the disc. Approximate  
speed is 1(1/16), 2(1/8), ꢀ(1/2).  
Hint  
• Set “STILL MODE” to “FIELD” in the Display menu if pictures in the slow  
playback mode are blurred. (Refer to pages 20-21.)  
• To cancel resume, press [STOP C] one more time in the stop mode.  
• The resume information stays on even when the power is turned off.  
Zoom  
Paused and Step-by-Step Playback  
DVD  
DVD  
Press [PAUSE F] during playback.  
1) Press [ZOOM] during playback.  
2) Press [ZOOM] repeatedly to select the required zoom  
factor: x2, x4 or OFF.  
To continue playback, press [PLAY B].  
DVD  
x2  
x4  
The disc goes forward by one frame each time [PAUSE F] is  
pressed in the pause mode.  
To continue playback, press [PLAY B].  
ꢀ) Press [K / L / s / B] to slide the zoomed picture across  
the screen.  
4) To exit zoom mode, press [ZOOM] to select OFF.  
Hint  
• On DVDs, set “STILL MODE” to “FIELD” in the Display menu if pictures in the  
pause mode are blurred. (Refer to pages 20-21.)  
Hint  
To use [PREV j ], [i NEXT] on this unit  
• Zooming function does not work while the disc menu is showing up.  
• x4 zoom is not available on some discs.  
DVD  
• The picture may be distorted when you press [PAUSE k] or [h] repeatedly  
Press once to skip chapters or tracks to a desired point.  
Press and hold to change forward or reverse playback  
speed.  
in the zoom mode.  
In the zoom mode, it automatically changes  
x2(x4) to the zoomed position guide.  
15  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On-Screen Display  
You can check the information about the current disc by pressing [DISPLAY] on the remote control.  
DVD  
DVD  
Angle icon appears only in a case  
multi-angel is available on the DVD.  
DISPLAY  
DISPLAY  
Current playback status  
Current playback status  
4/12 0:03:21 - 0:02:15  
T
11/16 0:00:00 - 0:03:30  
1
2
3
1
2
Remaining time of the current track  
Elapsed time of the current track  
Remaining time of the current chapter  
Elapsed time of the current chapter  
TR(Track):  
CH(Chapter):  
Current chapter number / Total chapters  
Current track number / Total tracks  
DISPLAY  
DISPLAY  
ALL:  
Current track number / Total tracks  
4/12 0:13:45 - 0:45:40  
T
1/3 0:00:00 - 1:23:45  
Current repeat setting appears only  
when the repeat setting is active.  
T: Track repeat  
Remaining time of the current title  
Elapsed time of the current title  
A: All Tracks repeat  
B: A-B repeat  
TT(Title):  
Current title number / Total titles  
A
DISPLAY  
Remaining time of the entire disc  
Elapsed time of the entire disc  
Layer numbers, appears only when  
playing a two-layered Disc.  
L0: Layer 0 is playing  
DISPLAY  
T
L1  
L1: Layer 1 is playing  
3
Current repeat setting appears only  
when the repeat setting is active.  
C: Chapter repeat  
Hint  
T: Title repeat  
• When you are playing a disc in PROGRAM or RANDOM mode,  
A
B: A-B repeat  
2
PROGRAM (or RANDOM) will be displayed instead of  
.
BIT RATE: The amount of audio and  
video data currently being read  
DISPLAY  
4
16  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Search Functions  
SEARCH MODE does not work during Programmed or Random Playback.  
Using Track Search  
Using Time Search  
DVD  
DVD  
Press [SEARCH MODE].  
Press [SEARCH MODE] repeatedly until the Time Search  
1
1
2
display appears.  
SEARCH  
MODE  
SEARCH  
MODE  
/29  
TOTAL 1:29:00  
PLAY  
Select a desired disc time by using the Number buttons within ꢀ0  
Select track number by using the Number buttons within ꢀ0 seconds.  
2
seconds.  
1
4
7
2
5
8
0
3
6
9
1
4
7
2
5
8
0
3
6
TOTAL 1:29:00  
/29  
9
+10  
• For the disc with less than 10 tracks, press the track number directly.  
Hint  
• For discs with more than 10 but less than 99 tracks, to play single-digit track,  
press [0] first, then the track number (e.g. for track ꢀ, press [0], [3]). To play a  
double-digit track, press the track number.  
• For discs with more than 100 tracks, to play a single or a double-digit track,  
press [0] first, then the track number (e.g. for track ꢀ, press [0], [0], [3], and for  
track 26, press [0], [2], [6]). To play a triple-digit track, press the track number.  
• When there is no need to enter a number, “0” appears automatically.  
For example, “0: 0_: _ _” appears in the Time Search display if the total time of  
the title or track is less than 10 minutes.  
• Press [CLEAR/C.RESET] to erase the incorrect input at step 2.  
Marker Setup  
Using [SKIP/CH. G/o, H/p]  
DVD  
Press [SKIP/CH. G/o, H/p] during playback.  
1
Current Track  
(TR)  
This feature allows you to assign a specific point on a disc to be  
called back later.  
SKIP/CH.  
TR 1 TR 2 TR ꢀ TR 4  
PLAY  
To set a marker  
SKIP  
SKIP  
Press [SEARCH MODE] repeatedly until the marker display  
appears.  
1
Hint  
[+10] can also bring the Track search display, except for the disc with less than  
10 tracks. For such a disc, track search can be done by just pressing the track  
number.  
SEARCH  
MODE  
PLAY  
Select a marker.  
2
Using Title / Chapter Search  
or  
DVD  
Press [ENTER].  
3
Press [SEARCH MODE] once for the Chapter Search.  
Press [SEARCH MODE] twice for the Title Search.  
1
ENTER  
SEARCH  
MODE  
/12  
PLAY  
To return to the marker later  
Press [SEARCH MODE] repeatedly until the marker display  
1
appears.  
SEARCH  
MODE  
Select title/chapter number by using the Number buttons  
within ꢀ0 seconds.  
2
1
4
7
2
5
8
0
3
6
/12  
Select the marker.  
9
2
or  
+10  
Using [SKIP/CH. G/o, H/p]  
Press [ENTER] at the desired marker.  
3
ENTER  
Press [SKIP/CH. G/o, H/p] during playback.  
1
Current Chapter  
(CH)  
CH 1 CH 2 CH ꢀ CH 4  
SKIP/CH.  
To exit the marker screen  
PLAY  
SKIP  
SKIP  
or  
RETURN  
Press [RETURN ].  
1
Current Title  
(TT)  
TT 1 TT2 TTꢀ TT4  
Hint  
SKIP  
SKIP  
• The Marker display will disappear in about ꢀ0 seconds when there is no output.  
(If the disc has no chapters)  
• To clear a marker, select the marker to be cleared at step 2 in the section  
“To set a marker” or “To return to the marker later” and then press  
[CLEAR/C.RESET].  
Hint  
• Depending on the disc being played, this function can also be performed by  
directly entering the desired chapter number with the Number buttons. Refer  
to the manual accompanying the disc.  
• Opening the disc tray or turning off the power will erase all markers.  
• Selecting “AC” at step 2 in the section “To set a marker” or “To return to the  
marker later” will also erase all markers.  
17  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Repeat / Random / Programmed Playback  
Repeat Playback  
Random Playback  
DVD  
DVD  
Repeat function is available only during playback.  
This function shuffles the playing order of tracks instead of  
playback in the sequence.  
Press [REPEAT] during playbck.  
1
Press [MODE] twice.  
RANDOM  
1
CD-DA  
TOTAL 0:45:55  
REPEAT  
MODE  
RANDOM PROGRAM  
--no indication--  
PLAY  
STOP  
PLAY  
<Example : DVD>  
Each time you press [REPEAT] repeat function changes as  
example below.  
Press [PLAY B] to start Random Playback.  
2
(repeat off)  
OFF  
PLAY  
(current chapter repeat)  
(current title repeat)  
(repeat off)  
CHAPTER  
TITLE  
OFF  
Hint  
• To repeat the current track in the random selections, press [REPEAT] repeat-  
edly until “ TRACK” appears during playback.  
• To repeat the entire random selections, press [REPEAT] repeatedly until  
ALL” appears during playback.  
• During random playback, you cannot go back to the previous track.  
(current track repeat)  
(entire disc repeat)  
TRACK  
ALL  
Programmed Playback  
DVD  
Hint  
• Repeat setting will be cleared when moving to another title, chapter or track.  
• Repeat playback are not available with all discs or during repeat A-B playback.  
You may determine the order in which tracks will play.  
Press [MODE] once.  
1
CD-DA  
TOTAL 0:00:00  
MODE  
STOP  
Repeat A-B Playback  
DVD  
Using [K/L] to select desired track.  
Press [ENTER].  
2
3
Repeat function is available only during playback.  
CD-DA  
TOTAL 1:03:30  
1
5
3:30  
5:10  
ENTER  
10 4:20  
11 3:00  
12 3:20  
17 4:10  
22 2:50  
2/3  
Press [A-B] at your desired starting point (A).  
1
or  
A-  
A-B  
PLAY  
• Up to 99 tracks can be ordered.  
If eight or more tracks were in a program, use [SKIP/CH. H///K , G//L]  
to see all the tracks.  
Press [A-B] at your desired ending point (B).  
Press [PLAY B] to start Programmed Playback.  
2
A-B  
A-B  
PLAY  
• Point B should be in the same title or track as point A.  
Hint  
Hint  
• Press [CLEAR/C.RESET] at step 2 to erase the most recently entered track.  
• To erase all programmed tracks at once, select “ALL CLEAR’’ and press  
[ENTER] at step 2.  
• To exit the sequence, press [A-B] so that “OFF” appears.  
• To cancel point A, press [CLEAR/C.RESET] at step 1.  
• This function does not work in the other repeat modes.  
• While a program is being played back, [STOP C] works as follows;  
Press [STOP C] and [PLAY B] next, so that the programmed playback  
restarts. (CD playback restarts from the current point.  
Press [STOP C] twice and [PLAY B] next, so that playback restarts from  
the first track in the original order. However, your programmed playback  
can be restarted when you follow the above steps. (Your programs are still  
stored until either the disc tray is open or power is turned off.)  
• To repeat the current track in the program, press [REPEAT] repeatedly until  
appears during playback.  
TRACK’’  
• To repeat the entire program, press [REPEAT] repeatedly until “  
appears during playback.  
ALL’’  
18  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Special Settings  
Subtitle Language  
Camera Angle  
DVD  
DVD  
This unit allows you to select a subtitle language (if available)  
during DVD playback.  
Some DVD discs may contain scenes which have  
been shot simultaneously from various angles.  
You can change the camera angle if the angle  
icon appears on the screen. If the “ANGLE ICON”  
setting is “OFF” in the OTHERS menu, the angle icon will not  
appear. (Refer to pages 20-22.)  
Press [SUBTITLE/T-SET] during playback.  
1
SUBTITLE  
1.ENG/6  
T-SET  
PLAY  
Press [ANGLE] during playback.  
1 / 8  
1
Each time you press [SUBTITLE/T-SET], subtitle language  
changes as example below.  
ANGLE  
PLAY  
OFF  
ENG  
FRE  
(no subtitles)  
Black Level Setting  
(English subtitles)  
(French subtitles)  
DVD  
Adjust the Black Level Setting to make  
the dark areas of the TV picture brighter.  
Press [MODE] during playback.  
1
ON  
MODE  
To set subtitle ON/OFF  
PLAY  
Press [SUBTITLE/T-SET] during playback.  
1
ENTER  
Press [ENTER] to  
adjust the black level.  
SUBTITLE  
T-SET  
OFF  
2
1.ENG/6  
PLAY  
ON: Makes the dark areas brighter.  
OFF: Shows the original picture as recorded.  
Press [B] to select subtitle ON or OFF.  
2
Press [RETURN  
] to exit.  
RETURN  
3
OFF  
Stereo Sound Mode  
Hint  
DVD  
• If your language is not shown after pressing [SUBTITLE/T-SET] several times,  
the disc may not have that language. However, some discs allow subtitle lan-  
guage setting on the disc menu. (Operation varies depending on the discs, so  
refer to the manual along with the disc.)  
This unit allows you to select a sound  
mode during CD playback.  
Press [AUDIO] during CD playback.  
1
• When “NOT AVAILABLE” appears on the TV screen, it means no subtitle is  
recorded on the scene.  
• If you choose a language that has a three- letter-language code, the code will  
be displayed every time you change the subtitle language setting. If you choose  
any other languages, ‘---’ will be displayed instead. (Refer to page 24.)  
• Some discs will only allow you to change the subtitle from the disc menu. Refer  
to the manual accompanying the discs for details.  
STEREO  
AUDIO  
PLAY  
Each time you press [AUDIO], sound mode changes as example below.  
STEREO  
(right and left channels are active)  
L-ch  
(left channel is active)  
Audio Language  
DVD  
R-ch  
(right channel is active)  
This unit allows you to select an audio language (if multiple  
languages are available) during DVD playback.  
Virtual Surround  
DVD  
Press [AUDIO] to change audio language.  
1
AUDIO  
1.ENG Dolby D 3/2.1ch 48k/3  
You can enjoy stereophonic virtual world on your existing 2  
channel stereo system.  
PLAY  
Press [MODE] twice (once for CD) during playback.  
1
Each time you press [AUDIO], audio language changes as  
example below.  
OFF  
MODE  
PLAY  
ENG  
SPA  
FRE  
(English audio)  
(Spanish audio)  
(French audio)  
Press [ENTER] for the desired effect.  
2
ENTER  
1
1: Natural effect  
2: Emphasized effect  
OFF: No effects (original sound)  
RETURN  
Press [RETURN  
] to exit.  
3
Hint  
• Some discs will only allow you to change the audio setting from the disc menu.  
Refer to the manual accompanying the discs for details.  
• When “OFF” appears on the TV screen, it means audio language is not  
available.  
Hint  
For CD play back only  
• Virtual Surround will not be effective if the sound mode is set to something  
• If your language is not shown after pressing [AUDIO] several times, the disc  
may not have that language. However, some discs allow audio language set-  
ting on the disc menu. (Operation varies depending on the disc, so refer to the  
manual along with the disc.)  
other than STEREO. Refer to “Stereo Sound Mode”.  
• When playing back 96kHz with Virtual Surround function, the sound will be  
down sampling at 48kHz and output as digital audio.  
19  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD  
DVD Setup  
QUICK SETUP Menu  
You can select the “PLAYER MENU”, “TV ASPECT” or “DOLBY DIGITAL” from the QUICK SETUP menu quickly.  
1
Press [SETUP] in the stop mode.  
2
Select the desired item.  
SETUP  
or  
STOP  
SETUP  
QUICK  
ENGLISH  
<SETUP MENU>  
ENTER  
P20  
P21  
P21  
Step 5  
Step 5  
Step 5  
A
B
C
Confirm that “QUICK” is selected.  
PLAYER MENU  
TV ASPECT  
DOLBY DIGITAL  
4:3 LETTER BOX  
BITSTREAM  
SETUP  
QUICK  
CUSTOM  
INITIALIZE  
ENTER  
Refer to the sections “PLAYER MENU”, “TV ASPECT”  
or “DOLBY DIGITAL” section on page 20 or 21.  
CUSTOM Menu  
You can change the settings of the unit.  
QUICK  
on pages 20-21 indicates DVD Setup menus also accessible from the QUICK SETUP menu.  
1
Press [SETUP] in the stop mode.  
2
Select “CUSTOM”.  
3
Select the desired item.  
SETUP  
ENTER  
STOP  
or  
or  
<SETUP MENU>  
ENTER  
SETUP  
CUSTOM  
SETUP  
SETUP  
LANGUAGE  
DISPLAY  
AUDIO  
PARENTAL  
OTHERS  
QUICK  
CUSTOM  
INITIALIZE  
QUICK  
CUSTOM  
INITIALIZE  
LANGUAGE menu  
OTHERS menu  
DISPLAY menu  
AUDIO menu  
PARENTAL menu  
SETUP  
LANGUAGE  
SETUP  
DISPLAY  
SETUP  
PARENTAL  
SETUP  
OTHERS  
SETUP  
AUDIO  
PASSWORD  
AUDIO  
ORIGINAL  
OFF  
ENGLISH  
ENGLISH  
TV ASPECT  
STILL MODE  
4:3 LETTER BOX  
AUTO  
ANGLE ICON  
AUTO POWER OFF ON  
ON  
DRC  
ON  
Please enter a 4-digit password.  
SUBTITLE  
DISC MENU  
PLAYER MENU  
DOWN SAMPLING ON  
DOLBY DIGITAL BITSTREAM  
page 20  
page 21  
page 21  
page 22  
page 22  
A
B
C
D
E
LANGUAGE Setting  
Follow steps 1 to ꢀ in the “CUSTOM Menu” section on above.  
A
5
Select the desired language.  
4
Select the desired item.  
6
To exit the menu  
ENTER  
ENTER  
SETUP  
or  
or  
AUDIO *1 *2  
Hint  
AUDIO  
(Default: ORIGINAL)  
Sets the audio language.  
ORIGINAL  
ENGLISH  
FRENCH  
*1  
• Language options are not available with  
some discs.  
• If OTHER is selected on the AUDIO,  
SUBTITLE or DISC MENU screen, press  
four-digit number to enter the code for the  
desired language. (Refer to the language  
code list on page 24.)  
• Only the languages supported by the disc  
can be selected.  
*2  
LANGUAGE menu  
SUBTITLE: *1 *2  
(Default: OFF)  
Sets the subtitle language.  
SUBTITLE  
OFF  
ENGLISH  
FRENCH  
SETUP  
LANGUAGE  
AUDIO  
ORIGINAL  
SUBTITLE  
DISC MENU  
PLAYER MENU  
OFF  
ENGLISH  
ENGLISH  
DISC MENU: *1  
(Default: ENGLISH)  
Sets the language for DVD  
menu.  
DISC MENU  
ENGLISH  
FRENCH  
SPANISH  
• Language Setting for Audio and Subtitle are  
not available with some discs. Then use  
[AUDIO] and [SUBTITLE/T-SET]. Details  
are on page 19.  
QUICK  
PLAYER MENU:  
PLAYER MENU  
ENGLISH  
FRANÇAIS  
ESPAÑOL  
(Default: ENGLISH)  
Sets the language for the  
On-screen display.  
20  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DISPLAY Setting  
B
You can change the display functions. Follow steps 1 to ꢀ in the “CUSTOM Menu” section on page 20.  
4
Select the desired item.  
5
6 To exit the menu  
QUICK  
TV ASPECT:  
SETUP  
(Default: 4:3 LETTER BOX)  
See Hint on the right.  
Select the  
desired  
setting.  
or  
TV ASPECT  
ENTER  
TV ASPECT  
STILL MODE  
4:3 LETTER BOX  
AUTO  
4:3 LETTER BOX  
4:3 PAN & SCAN  
16:9 WIDE  
Hint  
ENTER  
or  
TV ASPECT:  
• Select “4:ꢀ LETTER BOX”, so  
that black bars may appear on  
the top and bottom of the screen.  
• Select “4:ꢀ PAN & SCAN” for a  
full height picture with both sides  
adjusted.  
• Select “16:9 WIDE” if a wide-  
screen TV is connected to this  
unit.  
DISPLAY menu  
SETUP  
DISPLAY  
STILL MODE:  
(Default: AUTO)  
See Hint on the right.  
TV ASPECT  
STILL MODE  
4:3 LETTER BOX  
AUTO  
Select the  
desired  
setting.  
STILL MODE  
ENTER  
TV ASPECT  
STILL MODE  
4:3 LETTER BOX  
AUTO  
AUTO  
FIELD  
FRAME  
ENTER  
or  
STILL MODE:  
• Select “AUTO” usually.  
• If you select “AUTO”, automati-  
cally select the best resolution  
setting (FRAME or FIELD) based  
on the data characteristics of the  
pictures. (default)  
• If you select “FIELD”, the picture  
in the still mode will be stabi-  
lized.  
• If you select “FRAME”, the  
picture in the still mode will be  
highly defined.  
• An individual picture on TV  
screen is called a “frame”, which  
consists of two separate images  
called as “field”.  
• Some pictures may be blurred  
if you select “AUTO” in the still  
mode due to their date charac-  
teristics.  
AUDIO Setting  
C
Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow steps 1 to ꢀ  
in the “CUSTOM Menu” section on page 20.  
5
6 To exit the menu  
4
Select the desired item.  
DRC (Dynamic Range Control):  
(Default: ON)  
SETUP  
Set to “ON” to compress the range between soft and loud sounds.  
or  
DRC  
ON  
OFF  
DOWN SAMPLING ON  
ON  
DOLBY DIGITAL  
BITSTREAM  
BITSTREAM  
Hint  
ENTER  
DRC:  
AUDIO menu  
• This function is available only on  
the discs which are recorded in  
the Dolby Digital format.  
SETUP  
AUDIO  
DOWN SAMPLING:  
(Default: ON)  
Set to “ON” when outputting in 48kHz.  
DOWN SAMPLING:  
DRC  
ON  
DOWN SAMPLING ON  
DOLBY DIGITAL BITSTREAM  
• When playing back a 96kHz disc  
with the copyright protection,  
or when Virtual Surround is set  
to “1” or “2”, the sound will be  
down sampled at 48kHz and  
output as digital audio even if  
the “DOWN SAMPLING” is set  
to “OFF”.  
Set to “OFF” when outputting the original sound.  
DRC  
ON  
ON  
OFF  
BITSTREAM  
DOWN SAMPLING ON  
DOLBY DIGITAL  
BITSTREAM  
ENTER  
• This function is available only  
on digital outputting of a disc  
recorded in 96kHz.  
QUICK  
DOLBY DIGITAL:  
(Default: BITSTREAM)  
Set to “BITSTREAM” when the unit is connected to a Dolby Digital decoder.  
• BITSTREAM: outputs a Dolby Digital Signals.  
• PCM: converts the Dolby Digital into PCM (2 channel).  
DRC  
DOWN SAMPLING ON  
DOLBY DIGITAL BITSTREAM  
ON  
ON  
ON  
PCM  
ENTER  
21  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARENTAL Setting  
D
Parental Control limits the disc viewing that exceed your settings. (An incorrect password will not be acceptable.)  
This feature prevents your children from viewing inappropriate materials.  
Parental Levels  
Parental Level allows you to set the rating levels of your DVD discs. Playback will stop if the ratings exceed the levels you set.  
Follow steps 1 to ꢀ in the “CUSTOM Menu” section on page 20.  
4
Enter your desired four-digit  
password.  
5
Select “PARENTAL  
LEVEL”.  
6
Select the desired  
level.  
7
To exit the menu  
SETUP  
1
4
7
2
5
8
0
3
6
9
or  
or  
ENTER  
ENTER  
ENTER  
PARENTAL LEVEL  
ALL  
PARENTAL LEVEL  
PASSWORD CHANGE  
ALL  
8 [ADULT]  
7 [NC-17]  
6 [R]  
PARENTAL menu  
CONTROL LEVELS  
SETUP  
PARENTAL  
• ALL:  
All parental locks are cancelled.  
DVD softwares of any grades (adult/general/children) can be played back.  
Only DVD softwares intended for general use and children can be played back.  
PASSWORD  
• Level 8:  
• Levels 7 to 2:  
Please enter a 4-digit password.  
• Level 1:  
Only DVD softwares intended for children can be played back, with those intend-  
ed for adult and general use prohibited.  
TIPS FOR LEVELS  
• 8 [ADULT]:  
• 7 [NC-17]:  
• 6 [R]:  
DVD softwares of any grades (adult/general/children) can be played back.  
No one under 17 admitted  
or  
If you have set a password  
already, enter the current  
four-digit password.  
Restricted; under 17 requires accompanying parent or adult guardian  
Parental Guidance Recommended  
Unsuitable for children under 1ꢀ  
• 5 [PGR]:  
• 4 [PG1ꢀ]:  
• ꢀ [PG]:  
• 2 [G]:  
• 1 [KID SAFE]:  
Parental Guidance suggested  
SETUP  
PARENTAL  
General Audience  
PASSWORD  
Suitable for children  
Enter current password.  
Hint  
• DVD-Video discs may not respond to the parental lock settings. Make sure this function works with  
your DVD-Video discs.  
To Change the Password for Parental Controls  
You can change your password for parental controls. Follow steps 1 to ꢀ in the “CUSTOM Menu” section on page 20.  
4
Enter current four-digit  
password.  
5
Select “PASSWORD  
CHANGE”.  
6
Enter your new  
four-digit password  
(except for 47ꢀ7).  
7
To exit the menu  
SETUP  
1
4
7
2
5
8
0
3
6
9
1
4
7
2
5
8
0
3
6
9
or  
ENTER  
ENTER  
PARENTAL LEVEL  
PASSWORD CHANGE  
ALL  
Hint  
• Record the password  
in case you forget it.  
PARENTAL menu  
SETUP  
PASSWORD  
Please enter a 4-digit password.  
PARENTAL  
• If you forget the  
password, press [4],  
[7], [3], [7] at step 4,  
then enter your new  
password.Password  
will be cleared and  
parental levels will be  
set to “ALL”.  
SETUP  
PARENTAL  
PASSWORD  
Enter current password.  
OTHERS Setting  
E
You can change the other functions. Follow steps 1 to ꢀ in the “CUSTOM Menu” section on page 20.  
4
Select the desired item.  
5
6
To exit the menu  
ANGLE ICON:  
(Default: ON)  
SETUP  
Set to “ON” to show the angle icon when multiple camera angles are  
available during DVD playback.  
or  
OFF  
ON  
ANGLE ICON  
AUTO POWER OFF ON  
ON  
ENTER  
OTHERS menu  
SETUP  
OTHERS  
AUTO POWER OFF:  
(Default: ON)  
ANGLE ICON  
AUTO POWER OFF  
ON  
ON  
Set to “ON” to turn this unit off automatically after ꢀ0 minutes of no use.  
ANGLE ICON  
ON  
ON  
AUTO POWER OFF ON  
OFF  
ENTER  
22  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reset to the Default Setting (Except for PARENTAL Setting)  
To exit the  
menu  
1
Press [SETUP] in the  
2
Select “INITIALIZE”.  
3
Select “YES”.  
4
stop mode.  
SETUP  
SETUP  
STOP  
or  
or  
ENTER  
ENTER  
<SETUP MENU>  
Press  
twice.  
SETUP  
SETUP  
INITIALIZE  
SETUP  
Hint  
• When you cancel  
to initialize at step  
ꢀ, select “NO”.  
QUICK  
CUSTOM  
INITIALIZE  
Initialize?  
NO  
YES  
QUICK  
CUSTOM  
INITIALIZE  
Information  
Troubleshooting Guide  
If this unit does not perform properly when operated as instructed in this Owner's Manual, check this unit consulting the following checklist.  
PROBLEM CORRECTIVE ACTION  
No power.  
• Make sure the power plug is connected to an AC outlet.  
• Make sure the power is turned on.  
This unit does not  
respond to the remote  
control.  
• Check if the power plug is connected to an AC outlet.  
• Check the batteries in the remote control.  
• Aim the remote control directly at the remote sensor. If necessary, remove all the obstacles between the sensor and the remote control.  
• You have to be within 2ꢀ feet (7m) of this unit.  
• Check if the right mode is selected. If it’s not in the right mode, press [DVD] or [VCR], whichever you need, on the remote control.  
• Check if a cassette tape is in this unit.  
• Tune your radio to an empty AM station so that you hear a lot of noises. Turn the volume up, then if you hear some signal sound from the radio  
in response to your pressing buttons on the remote control, the remote control is working.  
Poor picture or noise.  
• Interference signal may be received. Change the position and orientation of the unit.  
Timer recording is impos-  
sible.  
• Make sure the Timer Recording is set correctly.  
• Make sure TIMER REC indicator on the front panel lights up. If not, press [SUBTITLE/T-SET].  
• Make sure the VCR clock is set correctly.  
Cannot go into record  
mode.  
• Make sure the tape has a record tab. If needed, cover the hole with adhesive tape.  
• Activate this unit in VCR mode. Press [VCR] on the remote control so that the VCR OUTPUT light is lit.  
Playback picture is partially  
noisy.  
• Adjust tracking control for a better picture by pressing [CHANNELL/K]] on the unit or [SKIP/CH. G/K, H/L] on the remote control.  
Cannot view a tape but  
the audio is OK.  
• Head cleaning may be necessary. Refer to “AUTO HEAD CLEANING”.  
• Make sure the VCR is not in the Menu mode.  
No or poor, playback  
picture.  
• Change the RF output channel to CH4. Then select the same channel on the TV.  
• Fine tune your TV.  
TV programs cannot be  
seen normally.  
• Re-check the ANT-IN and ANT-OUT connections. See the front page and page 6.  
• Press [VCR].  
• Press [VCR] on the remote control to activate it in the VCR mode. Check if the VCR OUTPUT light is lit, then set it to the TV position by press-  
ing [VCR].  
Video or color fades in  
and out when making a  
copy of a video tape.  
• You cannot copy a copyrighted video tape. You are experiencing copy guard protection.  
Cannot remove the tape.  
No picture.  
• Check if this unit is in the VCR mode. If not, press [VCR] on the remote control to switch the mode.  
• Connect the video cable firmly.  
• Insert a correct video disc that plays on this unit.  
• Press [DVD] on the remote control. Check if the DVD OUTPUT light is lit. Then try other DVD features.  
Disc cannot be played.  
• Insert the disc.  
• Clean the disc.  
• Place the disc correctly with the label side up.  
• Cancel the parental lock or change the control levels.  
• Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its surface.  
No sound.  
• Connect the audio cables firmly.  
• Turn the power of the audio component on.  
• Correct the audio output settings.  
• Correct the input settings on the audio component.  
Distorted picture.  
• Connect this unit directly to the TV.  
• There are some cases where pictures may be slightly distorted, and those are not a sign of a malfunction.  
• Although pictures may stop for a moment, this is not a malfunction.  
Audio or subtitle language  
does not match the setup.  
• The selected language is not available for audio or subtitles on the DVD.  
-This is not a malfunction.  
The camera angle cannot  
be changed.  
• The DVD does not contain sequences recorded from different camera angles.  
-This is not a malfunction.  
Audio or subtitle language  
cannot be changed.  
• The DVD does not contain audio source or subtitles in the selected language.  
-This is not a malfunction.  
“Prohibited icon” appears  
on the screen, prohibiting  
an operation.  
• That operation is prohibited by this unit or the disc.  
-This is not a malfunction.  
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s Manual for details on correct operations.  
• Playback from a desired track and random playback are not available during program playback.  
• Some functions are prohibited on some discs.  
2ꢀ  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Video Heads :  
Four Heads  
Output signal format :  
NTSC color  
Power source :  
120 V AC +/- 10%, 60 Hz +/- 0.5%  
Power consumption :  
21 W (standby: ꢀ.8W)  
• Designs and specifications are subject  
to change without notice.  
• If there is a discrepancy between lan-  
guages, the default language will be  
English.  
Operating temperature :  
41°F (5°C) to 104°F (40°C)  
Dimensions :  
W : 17 ꢀ/16”  
H : ꢀ ꢀ/4”  
(4ꢀ5mm)  
(94mm)  
D : 9 ꢀ/16”  
(2ꢀꢀmm)  
Weight :  
Approx 6.0lbs (2.7kg)  
Language Code List  
Language  
Code  
Language  
French [FRE]  
Frisian  
Code  
Language  
Macedonian  
Malagasy  
Malay  
Code  
Language  
Siswat  
Slovak  
Slovenian  
Somali  
Code  
A-B  
5264  
5271  
5ꢀ58  
5747  
5051  
5158  
5758  
5ꢀ60  
5ꢀ67  
5447  
5569  
5455  
5467  
5957  
595ꢀ  
5965  
5958  
5966  
5955  
5964  
5961  
5960  
6047  
6051  
6061  
6565  
6557  
6558  
6561  
5165  
6567  
6569  
6568  
Abkhazian  
Afar  
Afrikaans  
Albanian  
Amharic  
Arabic  
4748  
4747  
4752  
656ꢀ  
4759  
4764  
5471  
4765  
4771  
4772  
4847  
5167  
4860  
5072  
4854  
4855  
4864  
485ꢀ  
5971  
4851  
Galician  
Georgian  
German [GER]  
Greek [GRE]  
Greenlandic  
Guarani  
Gujarati  
Hausa  
Hebrew  
Malayalam  
Maltese  
Maori  
Spanish [SPA]  
Sundanese  
Swahili  
Marathi  
Armenian  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Moldavian  
Mongolian  
Nauru  
Swedish [SWE]  
T
Tagalog  
Tajik  
Tamil  
Tatar  
Telugu  
Thai  
Tibetan  
Tigrinya  
Tonga  
Tsonga  
Turkish [TUR]  
Turkmen  
Twi  
6658  
665ꢀ  
6647  
6666  
6651  
6654  
4861  
6655  
6661  
6665  
6664  
6657  
6669  
Nepali  
Norwegian [NOR]  
Hindi  
Hungarian [HUN]  
Basque  
O-R  
Bengali;Bangla  
Bhutani  
Bihari  
I-K  
Occitan  
Oriya  
Oromo(Afan)  
Panjabi  
Pashto;Pushto  
Persian  
Polish [POL]  
Portuguese [POR]  
Quechua  
Rhaeto-Romance  
Romanian [RUM]  
Russian [RUS]  
S
Samoan  
Sangho  
Sanskrit  
6149  
6164  
6159  
6247  
6265  
5247  
6258  
6266  
6ꢀ67  
6459  
6461  
6467  
Icelandic [ICE]  
Indonesian  
Interlingua  
Interlingue  
Inupiak  
5565  
5560  
5547  
5551  
5557  
5ꢀ47  
5566  
5647  
5669  
5760  
5765  
5757  
6469  
5771  
6460  
5761  
5767  
Bislama  
Breton  
Bulgarian  
Burmese  
Byelorussian  
Irish [IRI]  
Italian [ITA]  
Japanese [JPN]  
Javanese  
Kannada  
C-E  
Cambodian  
Catalan  
Chinese [CHI]  
Corsican  
Croatian  
Czech [CZE]  
Danish [DAN]  
Dutch [DUT]  
English [ENG]  
Esperanto  
Estonian  
5759  
4947  
7254  
4961  
5464  
4965  
5047  
6058  
5160  
5161  
5166  
U-Z  
Ukrainian  
Urdu  
Uzbek  
Vietnamese  
Volapuk  
Welsh  
Wolof  
Xhosa  
Yiddish  
Yoruba  
Zulu  
6757  
6764  
6772  
6855  
6861  
4971  
6961  
7054  
5655  
7161  
7267  
Kashmiri  
Kazakh  
Kinyarwanda  
Kirghiz  
Kirundi  
Korean [KOR]  
Kurdish  
6559  
655ꢀ  
6547  
5ꢀ50  
6564  
6554  
6566  
6660  
6560  
6550  
6555  
Scots Gaelic  
Serbian  
Serbo-Croatian  
Sesotho  
L-N  
Laothian  
Latin  
Latvian;Lettish  
Lingala  
Lithuanian  
5861  
5847  
5868  
5860  
5866  
F-H  
Setswana  
Shona  
Sindhi  
Faroese  
Fiji  
Finnish [FIN]  
5261  
5256  
5255  
Singhalese  
If you choose a Language that has a ꢀ letter language code, the code will be displayed every time you change the Audio or Subtitle language setting on page 19. If you  
choose any other languages, ‘---’ will be displayed instead. (ꢀ letter language code is written in bracket.)  
LIMITED WARRANTY  
FUNAI CORP. will repair this product, free of charge in the USA in the event  
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO  
EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL  
DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE  
INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU  
OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL  
OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES  
INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FITNESS  
of defect in materials or workmanship as follows:  
DURATION:  
PARTS: FUNAI CORP. will provide parts to replace defective parts without  
charge for one (1) year from the date of original retail purchase.  
Certain parts are excluded from this warranty.  
LABOR: FUNAI CORP. will provide the labor without charge for a period of  
FOR  
A
PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY  
ninety (90) days from the date of original retail purchase.  
FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES. ALL  
WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY  
AN AUTHORIZED SERVICE CENTER. THIS WARRANTY IS VALID WHEN  
THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.  
LIMITS AND EXCLUSIONS:  
This warranty is extended only to the original retail purchaser. A purchase  
receipt or other proof of original retail purchase will be required together with  
the product to obtain service under this warranty.  
IMPORTANT:  
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU  
MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. IF,  
AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO  
OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE  
CONTACT FUNAI CORP.  
This warranty shall not be extended to any other person or transferee.  
This warranty is void and of no effect if any serial numbers on the product are  
altered, replaced, defaced, missing or if service was attempted by an unau-  
thorized service center. This limited warranty does not apply to any product  
not purchased and used in the United States.  
ATTENTION:  
This product is produced for home use and this warranty only covers failures  
due to defects in material or workmanship which occurs during normal use. It  
does not cover damage which occurs in shipment, or failures which are caused  
by repairs, alterations or product not supplied by FUNAI CORP., or damage  
which results from accident, misuse, abuse, mishandling, misapplication, altera-  
tion, faulty installation, improper maintenance, commercial use such as hotel,  
rental or office use of this product or damage which results from fire, flood,  
lightning or other acts of God.  
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF  
THIS PRODUCT WITHOUT PRIOR NOTICE.  
To locate your nearest AUTHORIZED SERVICE CENTER or for general  
service inquiries, please contact us at:  
FUNAI CORPORATION  
Customer Service  
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY  
ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS,  
COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.  
Tel :1-800-605-8610  
19900 Van Ness Avenue, Torrance, CA 90501  
24  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Español  
Conexiones  
Consulte la “Basic TV Connection” en la página delantera  
antes de utilizar esta unidad.  
Pulse [B] para AJUSTE AUTO.  
CA 01  
3
1
AJUSTE AUTO  
Canal de salida RF  
Si el canal 3 se está utilizando para una transmisión,  
1) Programe su televisor al canal 4.  
Conecta el cable de la caja de canales de cable o la caja de satélite en la  
toma ANT-IN de la unidad?  
2) Inserte una cinta pregrabada en esta unidad.  
ꢀ) Pulse [SOURCE] en la unidad para que se encienda la  
luz VCR OUTPUT.  
• Si aparece ruido en la pantalla de TV, presione [VCR/TV]  
en el mando a distancia.  
4) Pulse una vez [PLAY B].  
5) Después de unos segundos, pulse [PLAY B] en la uni-  
dad durante ꢀ segundos.  
• El canal de salida RF cambiará del canal ꢀ al canal 4 y  
podrá ver una imagen reproducida.  
• Cuando no aparezca una imagen en la pantalla del televi-  
sor, repita el paso 4.  
SI  
NO  
Si Pulse [MENU] para salir.  
No Espere unos minutos.  
Después del escaneo  
• El sintonizador se detiene en el canal memorizado más bajo.  
• Puede seleccionar sólo los canales memorizados en esta unidad con  
[SKIP/CH. G//K, H//L] (o [CHANNEL K // L]).  
• Si aparece nuevamente “AJUSTE AUTO” en la pantalla de TV, verifique las  
conexiones de cable. Presione nuevamente [B].  
Ajuste del reloj  
6) Pulse [STOP C] para parar la reproducción.  
5
VCR  
Instalación de las pilas del control remo-  
2
to  
- M E N U -  
MENU  
1
PROGRAMAR  
o
AUTOREPETIR  
AJUSTE CANAL  
[OFF]  
1
2
3
B AJUSTE DE RELOJ  
SELEC. IDIOMA  
• Si no se ha ajustado el reloj, aparece la  
pantalla AJUSTE DE RELOJ cuando pulse  
[MENU]. En este caso, vaya al paso 2.  
Seleccione el mes actual.  
AJUSTE DE RELOJ  
2
3
4
5
6
7
8
MES  
1 0  
DIA  
– –  
AÑO  
– – – –  
/
Conmutación VCR/DVD  
3
HORA MINUTO AM/PM  
– – – – – –  
o
:
OPEN/CLOSE  
/EJECT  
OPEN/CLOSE  
STANDBY-ON  
SPEED  
AUDIO  
VCR  
DVD  
DISC IN PLAY  
STOP PLAY NEXT  
1
4
7
2
5
8
3
6
9
CHANNEL  
SOURCE  
PREV  
SKIP/CH.  
Seleccione el dia actual.  
AJUSTE DE RELOJ  
VCR/TV  
SLOW  
MES  
1 0  
DIA  
0 2  
AÑO  
– – – –  
/
0
VCR  
+10  
DVD  
Botón VCR  
Botón DVD  
DISPLAY  
PAUSE  
HORA MINUTO AM/PM  
– – – – – –  
o
:
PLAY  
STOP  
RECORD  
MENU  
VCR  
DVD  
ENTER  
Luz  
DVD OUTPUT  
SETUP TOP MENU  
RETURN  
Seleccione el año actual.  
SOURCE  
AJUSTE DE RELOJ  
SEARCH  
MODE  
CLEAR/  
C. RESET  
MODE  
ZOOM  
MES  
1 0  
DIA  
0 2  
AÑO  
2 0 0 6  
SUBTITLE  
T
-SET  
ANGLE  
REPEAT  
A-B  
/
Botón SOURCE  
HORA MINUTO AM/PM  
– – – – – –  
o
:
Luz  
VCR OUTPUT  
Seleccione la hora actual.  
AJUSTE DE RELOJ  
MODO VCR  
MES  
1 0  
DIA  
AÑO  
/
0 2 LUN 2 0 0 6  
Pulse [VCR] en el control remoto. (Compruebe que está encen-  
HORA MINUTO AM/PM  
0 5 – – – –  
o
dida la luz VCR OUTPUT.)  
:
MODO DVD  
Pulse [DVD] en el control remoto. (Compruebe que está encen-  
dida la luz DVD OUTPUT.)  
Seleccione los minutos actuales.  
AJUSTE DE RELOJ  
MES  
1 0  
DIA  
AÑO  
/
0 2 LUN 2 0 0 6  
Consejo  
HORA MINUTO AM/PM  
0 5 4 0 – –  
o
:
• Si pulsa sólo [SOURCE] en el panel frontal NO cambía el modo del control  
remoto. DEBE seleccionar también el modo correcto en el control remoto.  
Seleccione “AM” o “PM”.  
AJUSTE DE RELOJ  
Activación de la unidad por primera vez  
MES  
1 0  
DIA  
AÑO  
4
/
0 2 LUN 2 0 0 6  
VCR  
HORA MINUTO AM/PM  
o
0 5  
:
4 0  
P M AM  
BPM  
1
2
Encienda el televisor y sintonice al canal ꢀ.  
Para salir de la pantalla AJUSTE DE RELOJ  
• Si el canal ꢀ se está utilizando para una transmisión, vea la  
sección “RF Output Channel”.  
LANGUAGE SELECT  
STANDBY-ON  
B ENGLISH  
FRANCAIS  
ESPAÑOL  
[ON]  
o
25  
ES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Español  
Modo DVD  
Mode de grabadora de video  
Reproducción de la  
6
Disco/cinta  
Botón  
grabadora de vídeo  
(Orden alfavético)  
1
4
7
2
5
8
0
3
6
Para seleccionar el canal.  
Antes: Encienda el televisor  
y cambie al canal ꢀ.  
• Si el canal ꢀ se está utilizando para  
una transmisión, vea la sección  
“RF Output Channel”.  
Para seleccionar directamente Para seleccionar directamente El botón +10 no tiene efecto  
el capítulo o el título.  
la canción.  
en el modo de grabadora de  
vídeo.  
9
+10  
Para buscar en avance/  
retroceso en un disco.  
Para buscar en avance/retro- Para el avance/retroceso de  
ceso en un disco.  
Para empezar la reproducción  
en avance/retroceso lento  
durante el modo de pausa.  
una cinta.  
VCR  
A-B  
Para repetir entre los puntos A Para repetir entre los puntos A  
y B elegidos.  
y B elegidos.  
Para empezar la  
reproducción  
1
3
2
4
ANGLE  
AUDIO  
Para seleccionar los ángulos  
de la cámara en un disco.  
Para seleccionar el idioma de  
audio en un disco.  
Para seleccionar ESTÉREO,  
L-ch o R-ch.  
PLAY  
Para borrar los marcadores.  
Para borrar los marcadores.  
Para borrar los números  
entrados incorrectamente.  
Para borrar el punto para la  
repetición A-B.  
Para retirar el Nº de estado en  
la entrada de programa.  
Para borrar los números  
entrados incorrectamente.  
Para borrar el punto para la  
repetición A-B.  
Para salir del menú de la  
grabadora de vídeo.  
Para reponer el contador de  
cinta.  
CLEAR/  
C. RESET  
Para parar la  
reproducción  
Para expulsar  
OPEN/CLOSE  
/EJECT  
STOP  
DISPLAY  
Para indicar el modo de disco Para indicar el modo de disco Para indicar la hora actual,  
actual.  
actual.  
contador de cinta y canal.  
Para seleccionar el modo de  
salida de DVD.  
Para activar el mando a dis-  
tancia en el modo DVD.  
Para seleccionar el modo de  
salida de DVD.  
Para activar el mando a dis-  
tancia en el modo DVD.  
DVD  
Reproducción de DVD/  
CD  
7
Para seleccionar un  
ítem en el menú de la  
grabadora de vídeo.  
Para avanzar al  
siguiente menú de la  
grabadora de vídeo.  
Para volver un paso  
durante el ajuste del  
reloj y temporizador.  
ENTER  
Para mover el cursor y deter- Para mover el cursor y deter-  
Antes: Encienda el televisor, amplificador y  
otros equipos que puedan estar conectados a  
esta unidad. Asegúrese que el televisor y el  
sintoamplificador de audio (de venta en los  
comercios) están en el canal correcto.  
minar su posición.  
minar su posición.  
MENU  
Para llamar el menu en un  
disco.  
Para llamar el menú de la  
grabadora de vídeo.  
Para activar/desactivar el nivel  
del negro.  
Para activar/desactivar el  
envolvente virtual.  
Para disponer el orden de repro-  
ducción o la reproducción aleatoria.  
MODE  
DVD  
Para activar/desactivar el  
envolvente virtual.  
OPEN/CLOSE  
/EJECT  
Para abrir o cerrar la bandeja Para abrir o cerrar la bandeja  
Para expulsar el videocasete  
de la grabadora de vídeo.  
1
2
del disco.  
del disco.  
OPEN/CLOSE  
/EJECT  
Para hacer una pausa de  
reproducción del disco.  
Para avanzar la reproducción  
un cuadro a la vez.  
Para hacer una pausa de la repro-  
ducción o grabación de la cinta.  
Para avanzar la reproducción  
un cuadro a la vez.  
STANDBY-ON  
PAUSE  
Para hacer una pausa en la  
reproducción del disco.  
Ponga un disco con la  
etiqueta hacia arriba.  
Para empezar la reproducción Para empezar la reproducción Para empezar la reproducción  
PLAY  
del disco.  
del disco.  
de la cinta.  
RECORD  
Para empezar una grabaciòn  
una grabaciòn de un toque.  
o
Para parar la  
reproducción  
Para empezar  
la reproducción  
3
4
REPEAT  
Para reproducir repetidamente  
un capítulo o título.  
Para reproducir repetidamente  
una canción o disco.  
STOP  
PLAY  
RETURN  
Para volver a la operación  
previa en el menú.  
Para volver a la operación  
previa en el menú.  
Para buscar un capítulo, título Para buscar una canción.  
u hora. Para buscar la hora.  
SEARCH  
MODE  
Para llamar el menú de  
búsqueda de índice u hora.  
Para colocar o buscar los mar- Para colocar o buscar los  
Control remoto  
cadores.  
marcadores.  
8
SETUP  
Para llamar el menú de  
programación de DVD.  
Para llamar el menú de  
programación de DVD.  
OPEN/CLOSE  
STANDBY-ON  
/EJECT  
SPEED  
AUDIO  
SKIP/CH.  
SKIP/CH.  
Para cambiar de canal.  
Para saltar capítulos o titulo.  
Para saltar canciones.  
Para ajustar manualmente elseg-  
uimiento durante la reproducción.  
1
4
7
2
5
8
3
6
9
SKIP/CH.  
SLOW  
Para ver la cinta en cámara  
lenta.  
VCR/TV  
SLOW  
SPEED  
Para seleccionar la velocidad  
de grabación.  
0
VCR  
+10  
DVD  
DISPLAY  
PAUSE  
STANDBY-ON  
Para encender o apagar la  
unidad.  
Para encender o apagar la  
unidad.  
Para encender o apagar la  
unidad.  
PLAY  
STOP  
RECORD  
MENU  
STOP  
Para parar la reproducción o  
grabación.  
Para parar la reproducción.  
Para parar la reproducción.  
ENTER  
SUBTITLE  
T-SET  
SETUP TOP MENU  
RETURN  
Para poner la grabadora de vídeo  
en el modo de espera para una  
grabación con temporizador.  
Para seleccionar subtítulos en  
un disco.  
SEARCH  
MODE  
CLEAR/  
C. RESET  
MODE  
ZOOM  
SUBTITLE  
T-SET  
ANGLE  
REPEAT  
A-B  
TOP MENU  
Para llamar el menú superior  
en un disco.  
Para seleccionar el modo de salida  
de la grabadora de vídeo.  
Para activar el mando a distancia en  
el modo de la grabadora de vídeo.  
VCR  
VCR/TV  
Para seleccionar la posición de  
DVD o posición del elevisor.  
Para seleccionar la posición de CD  
o la posición del televisor.  
Para seleccionar la posición de la graba-  
dora de vídeo o posición del televisor.  
ZOOM  
Para ampliar parte de la  
imagen. (x2/x4)  
26  
ES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Use Guide  
Connections  
Please refer to “Basic TV Connection” on the front page  
Press [B] to start Auto Set Up.  
1
CH 01  
3
AUTO SET UP  
before you use this unit.  
RF Output Channel  
If channel 3 has been already occupied for broadcasting,  
1) Set your TV to channel 4.  
Do you connect the cable from the cable box or the satellite box to the unit’s  
ANT-IN jack?  
2) Insert a pre-recorded tape into this unit.  
ꢀ) Press [SOURCE] on the unit so that the VCR OUTPUT  
light is lit.  
YES  
NO  
Yes Press [MENU] to exit.  
If noise appears on the TV screen, press [VCR/TV] on the  
No Please wait for a few minutes.  
After scanning...  
• The tuner stops on the lowest memorized channel.  
• You can select only the channels memorized in this unit by using  
remote control.  
4) Press [PLAY B] once.  
5) After a few seconds, press and hold [PLAY B] on the  
unit for ꢀ seconds.  
• The RF output channel will change to channel 4 from  
channel ꢀ and you will see a playback picture.  
• When a picture does not appear on the TV screen,  
repeat step 4.  
[SKIP/CH. G/K, H/L] (or [CHANNEL K/L]).  
• If “AUTO SET UP” appears on the TV screen again, check the cable  
connections. Then, press [B] once again.  
6) Press [STOP C] to stop playback.  
Clock Set Up  
5
VCR  
Installing the Batteries for the Remote  
Control  
2
Press [MENU] and select “CLOCK SET“.  
Then press [B] to go to next step.  
- M E N U -  
TIMER PROGRAMMING  
1
1
AUTO REPEAT  
CHANNEL SET UP  
B CLOCK SET  
[OFF]  
2
3
MENU  
LANGUAGE SELECT  
or  
• If the clock is not set, the CLOCK SET screen appears when you press  
[MENU]. In this case, go to step 2.  
VCR/DVD Switching  
CLOCK SET  
3
Select the current month.  
Then press [B] to go to next step.  
2
3
MONTH DAY  
1 0 – –  
YEAR  
– – – –  
/
OPEN/CLOSE  
/EJECT  
OPEN/CLOSE  
STANDBY-ON  
SPEED  
AUDIO  
HOUR MINUTE AM/PM  
– –  
:
– –  
– –  
or  
VCR  
DVD  
DISC IN PLAY  
STOP PLAY NEXT  
1
4
7
2
5
8
3
6
9
CHANNEL  
SOURCE  
PREV  
SKIP/CH.  
VCR/TV  
SLOW  
0
VCR  
+10  
DVD  
CLOCK SET  
Select the current day.  
Then press [B] to go to next step.  
VCR button  
DISPLAY  
PAUSE  
MONTH DAY  
1 0 0 2  
YEAR  
– – – –  
DVD button  
PLAY  
/
STOP  
RECORD  
MENU  
HOUR MINUTE AM/PM  
– –  
:
– –  
– –  
VCR  
DVD  
or  
ENTER  
DVD OUTPUT  
light  
SETUP TOP MENU  
RETURN  
SOURCE  
SEARCH  
MODE  
CLEAR/  
C. RESET  
MODE  
ZOOM  
SUBTITLE  
T
-SET  
ANGLE  
REPEAT  
A-B  
CLOCK SET  
SOURCE button  
Select the current year.  
Then press [B] to go to next step.  
4
5
MONTH DAY  
1 0 0 2  
YEAR  
VCR OUTPUT light  
/
2 0 0 6  
HOUR MINUTE AM/PM  
– –  
:
– –  
– –  
or  
VCR MODE  
Select the current hour.  
Then press [B] to go to next step.  
CLOCK SET  
Press [VCR] on the remote control.(Verify that the VCR OUTPUT  
MONTH DAY  
1 0  
YEAR  
light is lit.)  
/
0 2 MON 2 0 0 6  
DVD MODE  
Press [DVD] on the remote control.(Verify that the DVD OUTPUT  
light is lit.)  
HOUR MINUTE AM/PM  
or  
0 5  
:
– –  
– –  
CLOCK SET  
Select the current minute.  
Then press [B] to go to next step.  
Hint  
6
7
8
MONTH DAY  
1 0  
YEAR  
/
0 2 MON 2 0 0 6  
• Pressing only [SOURCE] on the front panel DOES NOT switch the  
mode of the remote control. You MUST select the correct mode on  
the remote control.  
HOUR MINUTE AM/PM  
0 5  
:
4 0  
– –  
or  
CLOCK SET  
Select “AM” or “PM”.  
Turn On the Unit for the First Time  
MONTH DAY  
1 0  
YEAR  
4
/
0 2 MON 2 0 0 6  
VCR  
HOUR MINUTE AM/PM  
or  
0 5  
:
4 0  
P M AM  
B PM  
Turn on the TV and set it to channel ꢀ.  
• If channel ꢀ has been already occupied for broadcasting,  
1
To exit the CLOCK SET screen  
see “RF Output Channel” section.  
Select your language in the first time you turn on this unit.  
2
LANGUAGE SELECT  
Then press [B] to go to next step.  
B ENGLISH  
FRANCAIS  
ESPAÑOL  
[ON]  
STANDBY-ON  
or  
27  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Use Guide  
DVD mode  
VCR mode  
VCR Playback  
6
Disc/Tape  
Button  
(Alphabetical order)  
Before: Turn on the TV and  
set it to channel ꢀ.  
• If channel ꢀ has been already  
occupied for broadcasting, see “RF  
Output Channel” section.  
1
4
7
2
5
8
0
3
6
To select channel.  
The +10 button has no  
effect in VCR mode.  
To select chapter or title  
To select track directly.  
9
directly.  
+10  
To search forward/backward  
through a disc.  
To begin slow forward/reverse through a disc.  
playback in the pause mode.  
VCR  
To search forward/backward  
To forward/backward a tape.  
A-B  
Insert a video  
To start  
playback  
2
4
To repeat between your  
chosen point A and B.  
To repeat between your cho-  
sen point A and B.  
1
3
cassette into this unit.  
ANGLE  
AUDIO  
To select camera angles on  
a disc.  
PLAY  
To select audio languages  
on a disc.  
To select STEREO,  
L-ch or R-ch.  
To clear the markers.  
To stop  
playback  
To eject the  
cassette  
To clear the markers.  
To clear the numbers  
entered incorrectly.  
To cancel the point for A-B  
repeat.  
To remove status number in  
program input.  
CLEAR/  
C. RESET  
To exit the VCR Menu.  
To reset the tape counter.  
OPEN/CLOSE  
/EJECT  
To clear the numbers  
entered incorrectly.  
To cancel the point for A-B  
repeat.  
STOP  
DISPLAY  
To display the current disc  
mode.  
To display the current disc  
mode.  
To display the current time,  
tape counter, and channel.  
DVD/CD Playback  
To select the DVD output mode.  
To select the DVD output mode.  
DVD  
7
To activate the remote  
control in DVD mode.  
To activate the remote  
control in DVD mode.  
Before: Turn on the TV, amplifier and any other  
components which are connected to this unit.  
Make sure the TV and audio receiver (commer-  
cially available) are set to the correct channel.  
To select an item  
on the VCR Menu.  
To advance to the  
next VCR Menu.  
To go back one  
step during clock  
and timer setting.  
ENTER  
To move the cursor and  
determine its position.  
To move the cursor and  
determine its position.  
DVD  
MENU  
To call up the Menu on a disc.  
To call up the VCR Menu.  
1
3
2
To set black level on/off.  
To set virtual surround  
on/off.  
To arrange the playing order  
or play randomly.  
MODE  
OPEN/CLOSE  
/EJECT  
STANDBY-ON  
To set virtual surround on/off.  
OPEN/CLOSE  
/EJECT  
To open or close the disc  
tray.  
To open or close the disc  
tray.  
To eject the video  
cassette from the VCR.  
Insert a disc with  
label facing up.  
To pause tape playback or  
recording.  
To advance playback one  
frame at a time.  
To pause disc playback.  
To advance playback one  
frame at a time.  
PAUSE  
To pause disc playback.  
To begin disc playback.  
To stop  
playback  
To start  
4
playback  
To begin disc playback.  
To begin tape playback.  
PLAY  
STOP  
PLAY  
RECORD  
To start a recording or One  
Touch Recording.  
REPEAT  
To play a chapter or title  
repeatedly.  
To play a track or disc  
repeatedly.  
Remote Control  
8
RETURN  
To return to the previous  
operation in menu.  
To return to the previous  
operation in menu.  
SEARCH  
MODE  
OPEN/CLOSE  
/EJECT  
To search chapter, title or  
time.  
To search track.  
To search time.  
STANDBY-ON  
To call up the index or time  
search menu.  
SPEED  
AUDIO  
To set or search the markers.  
To set or search the markers.  
1
4
7
2
5
8
3
6
9
SETUP  
To call up the DVD setup  
menu.  
To call up the DVD setup  
menu.  
SKIP/CH.  
VCR/TV  
SLOW  
To change channels.  
To adjust the tracking  
manually during playback.  
SKIP/CH.  
SKIP/CH.  
To skip chapters or titles.  
To skip tracks.  
0
VCR  
+10  
DVD  
DISPLAY  
PAUSE  
SLOW  
• To view the tape in slow  
motion.  
PLAY  
SPEED  
To select the recording  
speed.  
STOP  
RECORD  
MENU  
STANDBY-ON  
ENTER  
To turn the unit on/off.  
To turn the unit on/off.  
To stop playback.  
To turn the unit on/off.  
SETUP TOP MENU  
RETURN  
SEARCH  
MODE  
CLEAR/  
C. RESET  
MODE  
ZOOM  
To stop playback or  
recording.  
STOP  
To stop playback.  
SUBTITLE  
T-SET  
ANGLE  
REPEAT  
A-B  
SUBTITLE  
T-SET  
To put the VCR into standby  
mode for a Timer Recording.  
To select subtitles on a disc.  
TOP MENU  
To call up the Top Menu on  
a disc.  
To select the VCR output mode.  
VCR  
To activate the remote  
control in VCR mode.  
VCR/TV  
To select DVD position or  
TV position.  
To select CD position or TV To select VCR position or  
position.  
TV position.  
ZOOM  
To magnify part of a picture.  
(x2/x4)  
1VMN2209ꢀ / E8A60UD★★★★  
Printed in China  
Download from Www.Somanuals.com. All Manuals Search And Download.  

KTI Networks TV Converter Box KC 300D User Manual
KWC Indoor Furnishings 10031033 User Manual
La Crosse Technology Portable Radio WS 7013U IT User Manual
LG Electronics CRT Television W1943T User Manual
LG Electronics Refrigerator LFD25860 User Manual
Lincoln Electric Welder 255XT User Manual
Magnavox DVD Recorder MRV640 User Manual
Makita Drill HP1500 User Manual
Melissa Toaster 243 012 User Manual
MGE UPS Systems Power Supply 12280 kVA User Manual