Please read before using this unit.
DVD/CD Player with Video Cassette Recorder
CMWD2206 A
Supplied Accessories
DVD PLAYER / VCR CMWD 2206
Remote control
(NB179UD)
with two AA (1.5V)
batteries
RF cable
(WPZ0901TM002 /
WPZ0901TM005)
STANDBY-ON
OPEN/CLOSE
POWER ON
REC
TIMER REC
RECORD
VCR
DVD
DISC IN
STOP
PLA
Y
REW
F.FWD
STOP/EJECT PLA
Y
CHANNEL
SOURCE
PREV
PLAY
NEXT
VIDEO
AUDIO
IR
Audio/Video cables
(WPZ0102TM018 /
WPZ0102LTE01 /
WPZ102SCP001)
Owner’s Manual (1VMN28734)
Owner’s Manual
Precautions
■ Recording
12
■ Safety Instructions
Moisture Condensation Warning
About Copyright
Symbols Used in This Manual
Maintenance
2
Recording & OTR (One Touch Recording)
Timer Recording
12
12
13
14
4
4
4
4
Hints for OTR and Timer Recording
Copying a Video Tape
DVD Functions
■ Playback
■ Search Functions
Using Track Search
Using Title / Chapter Search
Using Time Search
■ On-Screen Display
■ About the Video Cassettes and Discs
Playable Video Cassettes
Playable Discs
5
5
5
5
15
16
16
16
16
Unplayable Discs
Setup
■ Connections
RF Output Channel
Hint for Cable Box or Satellite Box
Connection to an Audio System
Connection to a TV
■ Preparation for Use
Turn on the Unit for the First Time
To Add or Delete Channels
Clock Setup
6
6
6
6
7
8
8
8
8
17
■ Repeat / Random / Programmed Playback
Repeat Playback / Repeat A-B Playback
Random Playback / Programmed Playback
18
18
18
19
19
19
19
20
20
21
21
22
22
23
■ Special Settings
Subtitle Language / Audio Language
Camera Angles / Black Level Setting
Stereo Sound Mode / Virtual Surround
■ DVD Setup
■ Function Overview
9
LANGUAGE Setting
Front Panel Indicator
9
DISPLAY Setting
VCR / DVD Switching
9
AUDIO Setting
Front & Rear Terminals
Remote Control
9
PARENTAL Setting
10
10
OTHERS Setting
Installing the Batteries for the Remote Control
Reset to the Default Setting (Except for PARENTAL Setting)
VCR Functions
■ Playback
Information
■ Troubleshooting Guide
■ Specifications
■ Language Code List
■ Limited Warranty
■ Quick Use Guide
11
23
24
24
24
25
■ Other Operations
11
11
11
12
Index Search
Time Search
Auto Repeat
Antenna
or
Antenna
or
Cable TV
signal
Cable TV
signal
(Back of DVD/VCR)
(Back of TV)
4
AC
(Back of TV)
Plug in
outlets
ANT-IN
1
2
ANT-OUT
Disconnect
3
Connect
Connect
From DVD/VCR
From TV
RF cable (supplied)
Please refer to “Connections”on page 6.
5
© 2009 Funai Electric Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not handle the power cord with wet hands.
Do not pull on the power cord when disconnecting it from an AC outlet. Grasp it by the plug.
Do not put your fingers or objects into the unit.
Location and Handling
Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.
Avoid a place with drastic temperature changes.
Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit.
Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is
placed too close to them. In this case, please ensure enough space between the external devices and the unit.
Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.
Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.
Dew Condensation Warning
Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few
hours until its inside gets dry.
- The unit is moved from a cold place to a warm place.
- Under conditions of high humidity.
- After heating a cold room.
Note about Recycling
• This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
• Batteries should never be thrown away or incinerated but disposed of in accordance with your local
regulations concerning chemical wastes.
Notice for Progressive Scan Output
Consumers should note that not all high definition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In case of picture problems with 525(480) progressive scan output,
it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions
regarding your TV set compatibility with this 525p(480p) DVD player, please contact our customer service center.
3
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning Discs
Moisture Condensation Warning
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe
the disc from the center to out. Do not wipe in a circular motion.
• Do not use solvents such as benzine, thinner, commercially
available cleaners, detergent, abrasive cleaning agents or
antistatic spray intended for analog records.
Moisture may form inside this unit under the following conditions:
• Immediately after a heater is turned on.
• In a steamy or humid room.
• When this unit is suddenly moved from a cold to warm
environment.
If moisture forms inside this unit, it may not operate properly or
damage the cassette tape. In such case, do not use this unit at
least for 2 hours until its inside gets dry.
Cleaning the Disc Lens
• If this unit continues to perform improperly even after you have
referred to the relevant sections and to the “Troubleshooting
Guide” in this manual, the laser optical pickup unit may be dirty.
Consult your dealer or an authorized service center for inspection
and cleaning of the laser optical pickup unit.
About Copyright
lending of discs are prohibited.
Disc Handling
• When you handle a disc, hold it by its edge and try not to touch
This product incorporates copyright protection technology that
is protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized by
Macrovision, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
the surface of the disc.
• Always store the disc in its protective case when not in use.
Auto Head Cleaning
• Automatically cleans video heads as you insert or remove a
cassette tape, so you can see a clear picture.
• Playback picture may become blurred or interrupted while the
TV program reception is clear. Dirt accumulated on the video
heads after a long period of use, or the usage of rental or worn
cassette tapes can cause this problem. If a streaky or snowy
picture appears during playback, the video heads in your unit
may need to be cleaned.
Symbols Used in This Manual
The following symbols appear in some headings in this manual.
: Description refers to video cassette tapes.
Description refers to DVD-Video.
1. Please visit your local audio/video store and purchase a good
quality VHS video head cleaner.
2. If a Video head cleaner does not solve the problem, please call
our toll free customer support line found on the cover of this
manual to locate an authorized service center.
: Description refers to Audio CD.
Maintenance
Servicing
• Please refer to relevant topics on the “Troubleshooting Guide”
on page 23 before returning the product.
• If this unit becomes inoperative, do not try to correct the
problem by yourself. There are no user-serviceable parts inside.
Turn off, unplug the power plug, and please call our toll free
customer support line found on the cover of this manual to
locate an authorized service center.
Cleaning the Cabinet
• Wipe the front panel and other exterior surfaces of the unit with
a soft cloth.
• Never use a solvent, thinner, benzene or alcohol to clean the
unit. Do not spray insecticide liquid near the unit. Such chemi-
cals may discolor the surface or damage the unit.
4
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Playable Video Cassettes
Use only cassettes marked
Playable Discs
Playable
with this unit.
Recorded
signals
Mark (logo)
Region code
Disc size
Disc types
discs
DVD-Video
*1, 2, 4, 6, 10
or
DVD-RW
DVD-R
*1, 3, 4, 5, 6, 7,
8, 9, 10
e.g.)
12 cm
or
8 cm
title 1
title 2
Digital video
(MPEG2)
chapter 1 chapter 2 chapter 3 chapter 4 chapter 1
chapter 2
DVD+RW
DVD+R
*1, 3, 4, 5, 6, 8,
9, 10
Audio CD
*4, 6, 10
Digital audio
Digital audio
e.g.)
12 cm
or
track 1
track 2
track 3
track 4
track 5
track 6
CD-RW
CD-R
8 cm
*4, 5, 6, 9, 10
is a trademark of DVD Format/Logo Licensing Corporation.
If you cannot play back a disc which bears one of the marks above, check the following notes.
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back.
*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc’s producers.
*3: Discs Recorded in the VR (Video Recording) format cannot be played back.
*4: Scratched or stained discs may not be played back.
*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or special
properties of discs.
*6: You can play back discs which bear the marks above. If you use non-standardized discs, this unit may not play them back. Even if
they are played back, the sound or video quality will be compromised.
*7: You may play back the unfinalized DVD-R/RW disc recorded in the video format on our brand’s DVD recorder. However,
depending on the recording status of a disc, the disc may not be played back at all or normally (the picture or sound may not
be smooth, etc.). In this case, you need to finalize the disc with the DVD recorder. Refer to the manual accompanying the DVD
recorder.
*8: Only the discs recorded in the video format and finalized can be played back.
Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be played back at all. (the
picture or sound may not be smooth, etc.)
*9: If the recorded portion of the disc is too small (less than 2 3/16 inches (55 mm) across), it may not play back properly.
*10: Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it correctly.
Unplayable Discs
NEVER play back the following discs. Otherwise, malfunction may result!
DVD-RAM / DVD-Audio / CD-i / Photo CD / Video CD / DVD with region codes other than 1 or ALL / DTS-CD / DVD-ROM for personal
computers / CD-ROM for personal computers
On the following disc, the sound MAY NOT be heard.
Super Audio CD
NOTE: Only the sound recorded on the normal CD layer can be delivered.
The sound recorded on the high density Super Audio CD layer cannot be delivered.
Any other discs without compatibility indications
5
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
Please refer to “Basic TV Connection” on the front page before you use this unit.
RF Output Channel
If channel 3 has been already occupied for
broadcasting,
1) Set your TV to channel 4.
2) Insert a pre-recorded tape into this unit.
3) Press [SOURCE] on the unit so that the VCR
SOURCE light is lit.
If noise appears on the TV screen, press
[VCR/TV] on the remote control.
4) Press [PLAY B] once.
5) After a few seconds, press and hold
[PLAY B] on the unit for 3 seconds.
The RF output channel will change to chan-
nel 4 from channel 3 and you will see a
playback picture.
When a picture does not appear on the TV
screen, repeat step 4.
6) Press [STOP C] to stop playback.
To select channels of the cable box or satellite box
(Back of DVD/VCR)
(Cable box or
Satellite box)
1) Turn on the unit by pressing [STANDBY-ON], then press
ANT-IN
[VCR/TV]. The STANDBY-ON indicator on the front panel will
Satellite or
Cable TV
signal
IN
OUT
ANT-OUT
G
K
H
L
/
light, then press [SKIP/CH.
/
] to select channel 3
RF cable
(supplied)
or 4 (the same channel as the output channel of the cable box
or satellite box).
(Back of TV)
• If you use the channel 4, you need to change the unit’s RF
output to channel 4. Refer to “RF Output Channel”.
2) At the TV, select channel 3 or 4 (the same channel as you have
selected at step 1).
3) On the cable box or satellite box, select the channel you want
to view or record.
Select this connection when you want to view or record a
scrambled channel. With this connection, channels cannot be
changed on the unit. You can view or record ONLY the channels you
While you are recording, only the recorded channel can be viewed.
Connection to an Audio System
Dolby Digital decoder,
MD deck or DAT deck
Stereo system
Audio
COAXIAL
L
R
Digital audio
input jack
Analog audio
input jacks
Audio Coaxial Digital cable
(commercially available)
Audio cable
(supplied)
DVD
AUDIO S-VIDEO
OUT OUT
DVD/VCR
AUDIO OUT
VCR
COMPONENT
DIGITAL
VIDEO OUT
AUDIO OUT
L
(Analog)
R
COAXIAL
DIGITAL
AUDIO OUT
DVD/VCR
or
SETUP > AUDIO >
DOLBY DIGITAL
DVD
Setting
COMPONENT
VIDEO OUT
DIGITAL
AUDIO OUT
AUDIO S-VIDEO
OUT OUT
Connection
L
Connecting to a Dolby Digital decoder
for Dolby Digital audio output.
R
BITSTREAM
Connecting to other equipment (an MD
deck or DAT deck etc.)
without Dolby Digital decoder.
(DVD mode only)
PCM
* To complete these settings, refer to pages 20-21.
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to a TV
Basic Audio
TV
AUDIO IN
L
R
Better picture
Good picture
Best picture
COMPONENT
VIDEO IN
Y
S-VIDEO IN
VIDEO IN
CB
Audio cable
(supplied)
C
R
S-Video cable
(commercially
available)
Video cable
(supplied)
DVD/VCR
DVD/VCR
AUDIO OUT
VCR
Component Video cable
(commercially available)
L
DVD
DVD/VCR
AUDIO OUT
VCR
COMPONENT
VIDEO OUT
DIGITAL
AUDIO S-VIDEO
AUDIO OUT
OUT
OUT
Y
L
AUDIO IN
VIDEO IN
L
R
C
B
R
R
COAXIAL
VIDEO OUT
R
-
C
DVD
AUDIO S-VIDEO
OUT OUT
DVD/VCR
VCR
DVD
AUDIO S-VIDEO
OUT OUT
COMPONENT
COMPONENT
VIDEO OUT
VIDEO OUT
A
or
Y
DVD
AUDIO S-VIDEO
OUT OUT
DIGITAL
AUDIO OUT
C
B
R
VIDEO OUT
L
C
R
AUDIO OUT
(Analog)
VIDEO OUT
S-VIDEO OUT
COMPONENT VIDEO OUT
After you have completed connections
Press the input selector button (usually TV/VIDEO, INPUT or AUX) on your TV to switch an appropriate external input channel (usually
near channel 0) for viewing the picture from this unit. If the picture does not appear, also refer to the manual accompanying your TV.
INPUT MODES FOR COMMON TV BRANDS
Listed below are inputs for common brand name TV’s.
Admiral:
Curtis Mathis:
GE:
AUX
Panasonic:
RCA:
TV/VIDEO
LINE1, LINE2, 00, 90, 91, 92, 93
INPUT, TV/VCR, 00, 90, 91, 92, 93
INPUT, TV/VCR, 00, 90, 91, 92, 93
Samsung:
Sanyo:
TV/VIDEO
Hitachi:
INPUT, AUX
VIDEO
JVC:
VIDEO, VIDEO1, VIDEO2, VIDEO3
Sharp:
Sony:
Toshiba:
Zenith:
00
Kenwood:
LXI-Series:
Magnavox:
AUX
00
VIDEO1, VIDEO2, VIDEO3
TV/GAME
00
AUX CHANNEL
7
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation for Use
Turn on the Unit for the First Time
To Preset the Channel Again
1) Press [MENU] until the main menu appears.
2) Select “CHANNEL SET UP” by using [K /L], then press [B]
3) Select “AUTO SET UP” by using [K /L], then press [B]. After scan-
VCR
Operations described in this manual are
mainly based on the remote control.
Turn on the TV and set it to channel 3.
• If channel 3 has been already occupied for broadcasting,
see “RF Output Channel” section on page 6.
ning, the tuner stops on the lowest memorized channel.
To Change the On-Screen Language
1) Press [MENU] until the main menu appears.
2) Select “LANGUAGE SELECT” by using [K/L], then
press [B]
3) Select ENGLISH” , “FRANCAIS” or ESPAÑOL” by using [K/
L] then press [CLEAR/C.RESET]
Select your language when turning this unit on for the first time.
Then press [B] to go to next step.
LANGUAGE SELECT
B
ENGLISH
FRANCAIS
ESPAÑOL
[ON]
STANDBY-ON
or
CH 01
Press [B] to start Auto Set Up.
AUTO SET UP
Clock Setup
VCR
Press [MENU] and select “CLOCK SET”.
- M E N U -
TIMER PROGRAMMING
Then press [B] to go to next step.
AUTO REPEAT [OFF]
CHANNEL SET UP
B
CLOCK SET
MENU
LANGUAGE SELECT
or
• If the clock is not set, the CLOCK SET screen appears when you
press [MENU]. In this case, go to step 2.
CLOCK SET
Select the current month.
Then press [B] to go to next step.
3
MONTH DAY
1 0 – –
YEAR
– – – –
/
HOUR MINUTE
– – – –
AM/PM
– –
To Select a Channel
:
or
You can select a channel by using the number buttons or
[
SKIP/CH.
G
/
K
H/L]
CLOCK SET
Select the current day.
Then press [B] to go to next step.
Notes for using the number buttons:
MONTH DAY
YEAR
– – – –
1 0 0 5
/
• When selecting cable channels which are higher than 99, enter
channel numbers as a three-digit number.
(for example: 117, press [1], [1], [7])
HOUR MINUTE
– – – –
AM/PM
– –
:
or
• You must precede single-digit channel numbers with a zero. (for
example: 02, 03, 04 and so on)
CLOCK SET
Select the current year.
Then press [B] to go to next step.
4
MONTH DAY
1 0 0 5
YEAR
/
2 0 0 9
HOUR MINUTE
AM/PM
– –
To Add or Delete Channels
– –
:
– –
or
VCR
Select the current hour.
Then press [B] to go to next step.
CLOCK SET
- M E N U -
MONTH DAY
1 0 0 5 MON
YEAR
2 0 0 9
Press [MENU] to select “CHANNEL SET UP”.
/
TIMER PROGRAMMING
Then press [B] to go to next step.
AUTO REPEAT [OFF]
HOUR MINUTE
0 5 – –
AM/PM
– –
B
CHANNEL SET UP
CLOCK SET
:
or
MENU
LANGUAGE SELECT
or
CLOCK SET
Select the current minute.
Then press [B] to go to next step.
• If the clock is not set, the “CLOCK SET” screen appears when you
press [MENU]. In this case, press [MENU] again.
6
8
MONTH DAY
1 0 0 5 MON
YEAR
/
2 0 0 9
HOUR MINUTE
0 5 4 0
AM/PM
– –
CHANNEL SET UP
:
Select “MANUAL SET UP”.
Then press [B] to go to next step.
or
3
5
AUTO SET UP
B
MANUAL SET UP
CLOCK SET
Select “AM” or “PM”.
or
MONTH DAY
YEAR
2 0 0 9
1 0 0 5 MON
/
or
HOUR MINUTE
0 5 4 0
AM/PM
P M AM
B
MANUAL SET UP
Select the channel to be added or deleted.
:
PM
CHANNEL 30
ADD
(CATV)
or
or
or
To exit the CLOCK SET screen
MANUAL SET UP
Select “ADD” or “DELETE”.
CHANNEL 30
DELETE
(CATV)
or
CLEAR/
C. RESET
To exit the menu
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel Indicator
Lights up when the inserted disc
is being played back.
Blinks when an unacceptable
disc is inserted.
Lights up during a recording.
Blinks when a recording is paused.
Lights up when the disc is inserted.
DVD PLAYER / VCR CMWD 2206
STANDBY-ON
POWER ON
OPEN/CLOSE
REC
STOP/EJECT PLAY
TIMER REC
RECORD
VCR
DVD
DISC IN PLAY
STOP PLAY NEXT
REW
F.FWD
CHANNEL
SOURCE
PREV
VIDEO
AUDIO
IR
Lights up when this unit is in the DVD mode.
Lights up when power is on.
Lights up when the Timer Recording or Lights up when this unit is in the VCR mode.
an OTR recording has been set.
VCR / DVD Switching
You must first select which component you wish to operate with
[SOURCE], as this product is a combination of a VCR and a DVD
player.
DVD PLAYER VCR CMWD 2206
/
OPEN/CLOSE
OPEN/CLOSE
/EJECT
STANDBY-ON
SPEED
AUDIO
VCR
DVD
DISC IN
STOP
PLA
Y
CHANNEL
SOURCE
PREV
PLAY
NEXT
1
4
7
2
5
8
3
6
9
SKIP/CH.
VCR MODE
VCR/TV
SLOW
Press [VCR] on the remote control.
0
VCR
+10
DVD
(Verify that the VCR SOURCE light is lit.)
VCR button
DVD button
DISPLAY
PAUSE
PLAY
DVD MODE
STOP
SOURCE button
Press [DVD] on the remote control.
RECORD
MENU
VCR
DVD
(Verify that the DVD SOURCE light is lit.)
ENTER
SOURCE
SETUP TOP MENU
RETURN
SEARCH
MODE
CLEAR/
C. RESET
MODE
ZOOM
DVD SOURCE light
VCR SOURCE light
SUBTITLE
T-SET
ANGLE
REPEAT
A-B
Front & Rear Terminals
DVD
DVD/VCR
VCR
REC
STOP/EJECT PLAY
TIMER REC
RECORD
ANT-IN
COMPONENT
VIDEO OUT
AUDIO OUT
DIGITAL
AUDIO S-VIDEO
I
VCR
REW
F.FWD
VIDEO
AUDIO
OUT
OUT
AUDIO OUT
ANT-IN
Y
L
O IN
AUDIO IN
VIDEO IN
L
I
IDEO IN
ANT-OUT
R
C
C
B
R
ANT-OUT
COAXIAL
VIDEO OUT
R
[Front Panel]
[Rear Panel]
6: VIDEO IN jack
1: DVD AUDIO OUT (analog) jacks
Connect a cable coming from the video out jack of a camcorder, another
VCR or an audio-visual source (laser disc player, video disc player, etc.)
here.
7: DVD/VCR VIDEO OUT jack
Connect the supplied video cable here through the video in jack of a
television.
8: COMPONENT VIDEO OUT jacks
Connect optional COMPONENT VIDEO cables here through the COMPO-
NENT VIDEO in jacks of a television. (DVD only)
9: S-VIDEO OUT jack
Connect an optional S-VIDEO cable here through the S-VIDEO in jack of a
television. (DVD only)
10: DIGITAL AUDIO OUT COAXIAL jack
Connect an optional coaxial digital audio cable here through the coaxial
Connect the supplied audio cable here through the audio in jacks of a
television or other audio equipment. (DVD only)
2: DVD/VCR AUDIO OUT jacks
Connect the supplied audio cable here through the audio in jacks of a
television or other audio equipment.
3: AUDIO IN jack
Connect audio cable coming from the audio out jack of a camcorder,
another VCR or an audio source here.
4: ANT-IN jack
Connect your antenna or cable box here.
5: ANT-OUT jack
Connect the supplied RF cable to the antenna input jack of a
television.
digital audio in jack of a decoder or audio receiver. (DVD only)
9
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
DVD mode
VCR mode
Disc/Tape
OPEN/CLOSE
/EJECT
Button
STANDBY-ON
SPEED
AUDIO
(Alphabetical order)
1
4
7
2
5
8
0
3
6
• To select channel.
• The +10 button has no effect
in VCR mode.
1
4
7
2
5
8
3
6
9
• To select chapter or title
directly.
• To select track directly.
SKIP/CH.
9
+10
VCR/TV
SLOW
To search forward/backward
through a disc.
To begin slow forward
playback in the pause mode.
• To search forward/backward
through a disc.
• To forward/backward a tape.
0
VCR
+10
DVD
DISPLAY
PAUSE
A-B
• To repeat between your cho-
sen point of A and B.
To repeat between your
chosen point of A and B.
PLAY
ANGLE
AUDIO
• To select camera angles on a
disc.
STOP
RECORD
MENU
• To select audio languages on
a disc.
• To select STEREO, L-ch or R-ch.
ENTER
• To remove status number in
program input.
• To remove status number in
program input.
SETUP TOP MENU
RETURN
CLEAR/
C. RESET
• To exit the VCR Menu.
• To reset the tape counter.
SEARCH
MODE
CLEAR/
C. RESET
MODE
ZOOM
• To clear the numbers entered • To clear the numbers entered
incorrectly.
To cancel the point for A-B repeat.
incorrectly.
SUBTITLE
T-SET
ANGLE
REPEAT
A-B
•
To cancel the point for A-B repeat.
DISPLAY
DVD
• To display the current disc
mode.
• To display the current disc
mode.
• To display the current time,
tape counter, and channel.
To select the DVD output mode.
• To activate the remote
control in DVD mode.
•
To select the DVD output mode.
• To activate the remote
control in DVD mode.
To select an item
on the VCR Menu.
To advance to the
next VCR Menu.
To go back one
step during clock
and timer setting.
ENTER
• To move the cursor and deter- • To move the cursor and deter-
mine its position.
mine its position.
Installing the Batteries for the
Remote Control
MENU
MODE
To call up the Menu on a disc.
• To call up the VCR Menu.
• To arrange the playing order
or play randomly.
• To set black level on/off.
• To set virtual surround on/off.
Install two AA (1.5V) batteries (supplied)
matching the polarity indicated inside
battery compartment of the remote
control.
• To arrange the playing order
or play randomly.
•
To set virtual surround on/off.
OPEN/CLOSE
/EJECT
• To eject the video
cassette from the VCR.
• To open or close the disc tray. • To open or close the disc tray.
• To pause tape playback or
recording.
• To pause disc playback.
PAUSE
• To advance playback one
frame at a time.
• To pause disc playback.
• To begin disc playback.
• To advance playback one
frame at a time.
• To begin disc playback.
• To begin tape playback.
PLAY
RECORD
• To start a recording or One
Touch Recording.
Keep in mind the following when using the
remote control:
Make sure that there is no obstacle between
the remote control and the remote sensor
on the unit.
• The maximum operable ranges from the
unit are as follows.
Line of sight: approx. 23 feet (7m)
Either side of center:
REPEAT
RETURN
• To play a chapter or title
repeatedly.
• To play a track or disc repeat-
edly.
• To return to the previous
operation in menu.
• To return to the previous
operation in menu.
SEARCH
MODE
• To search chapter, title or
time.
• To set or search the markers. • To set or search the markers.
• To search track.
• To search time.
• To call up the index or time
search menu.
SETUP
• To call up the DVD setup
menu.
• To call up the DVD setup
menu.
• To change channels.
• To adjust the tracking manu-
ally during playback.
• To view the tape in slow
motion.
SKIP/CH.
SKIP/CH.
• To skip chapters or titles.
• To skip tracks.
approx. 16 feet (5m) within 30°
Above: approx. 16 feet (5m) within 15°
Below: approx. 10 feet (3m) within 30°
SLOW
SPEED
• To select the recording speed.
DVD PLAYER / VCR CMWD 2206
STANDBY-ON
OPEN/CLOSE
P
O
W
E
R
O
N
REC
TIMER REC
ECORD
VCR
DVD
DISC IN
STOP
PLA
Y
REW
F.FWD
S
T
O
P
/
E
J
E
C
T
P
L
A
Y
CHANNEL
SOURCE
PREV
P
L
A
Y
XT
VIDEO
AUDIO
IR
• To turn the unit on or to turn • To turn the unit on or to turn • To turn the unit on or to turn
STANDBY-ON
the unit into the standby
the unit into the standby
the unit into the standby
mode. (To completely turn off mode. (To completely turn off mode. (To completely turn off
the unit, you must unplug the the unit, you must unplug the the unit, you must unplug the
AC power cord.)
AC power cord.)
AC power cord.)
• To stop playback or
recording.
STOP
• To stop playback.
• To stop playback.
SUBTITLE
T-SET
To put the VCR into standby
mode for a Timer Recording.
• To select subtitles on a disc.
TOP MENU
VCR
• To call up the Top Menu on a
disc.
To select the VCR output mode.
• To activate the remote
control in VCR mode.
VCR/TV
ZOOM
• To select DVD position or TV • To select CD position or TV
• To select VCR position or TV
position.
position.
position.
• To magnify part of a picture.
(x2 / x4)
10
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Before:
Turn on the TV and set it to channel 3.
• If channel 3 has been already occupied for broadcasting, see “RF Output Channel” section on page 6.
VCR
Insert a video cassette
into this unit.
To start playback
OPEN/CLOSE
/EJECT
STANDBY-ON
SPEED
AUDIO
STANDBY-ON
POWER ON
1
4
7
2
5
8
3
6
9
PLAY
SKIP/CH.
REC
TIMER REC
RECORD
VCR/TV
SLOW
REW
F.FWD
STOP/EJECT PLAY
VIDEO
AUDIO
IR
0
VCR
+10
DVD
To stop playback
To eject the cassette
DISPLAY
PAUSE
OPEN/CLOSE
/EJECT
STOP
PLAY
STOP
Other Operations
To cue or review picture during playback (Picture Search)
Counter Reset
Use [g] or [h ]([F.FWD g] or [REW h]).
Press [CLEAR/C.RESET]
• Press it again and the unit will search in super high speed. (in the
SLP mode only)
To freeze the picture on TV screen during playback (Still mode)
Press [PAUSE F]. Each time you press the button, the picture will
be forwarded by one frame.
• If the picture begins to vibrate vertically in the still mode,
stabilize the picture by using [SKIP/CH. G/K H/L]
(or [CHANNEL K/L]).
To play back in slow motion (Slow mode)
Press [SLOW] during playback or the still mode.
• If the noise bars appear on the TV screen, you can reduce it by
using [SKIP/CH. G/K H/L] (or [CHANNEL K/L]).
Auto Rewind
When a tape reaches its end during playback, fast-forward or record-
ing (except Timer Recording and One Touch Recording), the tape
will automatically rewind to the beginning. After rewinding finishes,
the unit will eject the tape.
• If the picture is distorted or rolling vertically, adjust the vertical
hold control on your TV if equipped.
Index Search
Time Search
You can skip the program backward and forward by the Index
Mark.
You can search backward and forward a specific length of time
on a tape.
VCR
VCR
• Insert a tape into this unit.
• Insert a tape into this unit.
Press [SEARCH MODE] once.
Press [SEARCH MODE] twice.
SEARCH
MODE
SEARCH
MODE
TIME SEARCH
INDEX SEARCH
:
Select the desired length of time for fast forwarding or
To select Index Mark
rewinding.
INDEX SEARCH
0 3
TIME SEARCH
2 : 5 0
or
01 ~ 20
or
CURRENT PROGRAM
0:01~ 9:59
Beginning
of the tape
End of
the tape
(1 minute~9 hours and 59 minutes)
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5
02
01
01
02
03
To rewind
INDEX MARK
ss
To rewind
3
4
ss
To fast forward
BB
To fast forward
BB
After searching, it automatically starts playback.
PLAYB
After searching, it automatically
starts playback.
PLAYB
11
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Repeat
This function will playback a tape repeatedly from the beginning when the tape reaches the end.
VCR
- M E N U -
- M E N U -
Press [B] for
“AUTO REPEAT”, “ON” or “OFF”.
Press [MENU], and choose
“AUTO REPEAT” during playback.
TIMER PROGRAMMING
AUTO REPEAT [ON]
CHANNEL SET UP
CLOCK SET
TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
B
B
MENU
LANGUAGE SELECT
LANGUAGE SELECT
or
Recording
Recording & OTR (One Touch Recording)
Before: Turn on the TV and set it to channel 3.
• If channel 3 has been already occupied for broadcasting,
see “RF Output Channel” section on page 6.
OPEN/CLOSE
/EJECT
STANDBY-ON
POWER ON
OPEN/CLOSE
STANDBY-ON
SPEED
AUDIO
VCR
1
4
7
2
5
8
3
6
9
REC
STOP/EJECT PLAY
TIMER REC
RECORD
VCR
DVD
DISC IN
STOP
SKIP/CH.
REW
F.FWD
CHANNEL
SOURCE
PREV
P
VIDEO
AUDIO
IR
Insert a cassette with Select the channel
VCR/TV
SLOW
tab into this unit.
to record.
0
VCR
+10
DVD
1
4
7
2
5
8
0
3
6
9
DISPLAY
PAUSE
SKIP/CH.
or
Accidental erasure prevention
To prevent accidental recording on a recorded
cassette, remove its record tab. To record on it
later, cover the hole with adhesive tape.
PLAY
STOP
RECORD
MENU
Press [SPEED] to select the desired tape speed.
ENTER
SETUP TOP MENU
RETURN
SPEED
Record tab
Tape Speed
Type of tape
SP mode
Recording/Playback Time
T60
T120
T160
1hour
3hours
2hours
6hours
2-2/3hours
8hours
SP
SLP mode
To stop recording temporarily (Pause mode)
Press [PAUSE F]
Press [RECORD] repeatedly to select the
desired recording length.
• During the rec-pause mode, five C marks appear on the TV screen. Each C mark rep-
resents one minute.
RECORD
• Press it again to resume recording.
REC
OTR(0:30)
OTR(1:00).....
(Normal recording)
• Pause mode will be automatically canceled after 5 minutes to prevent damage to
the tape and the video head.
REC
OTR(8:00)
OTR(7:30)
To stop recording
To eject the record-
ed cassette
OPEN/CLOSE
/EJECT
STOP
Timer Recording
VCR
Select the desired date.
Then press [B] to go to next step.
Insert a tape with its record tab into the unit.
4
Press [MENU], then select “TIMER PROGRAMMING”.
ONE TIME PROGRAM
PROGRAM NUMBER
or
- M E N U -
TIMER PROGRAMMING
1
DATE
1 0 / 0 5 MON
B
TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
PROG
DATE
START TIME
END
CHANNEL
REC SPEED
12345678
MENU
START TIME – – : – – – –
END
CHANNEL
TIME – – : – – – –
– –
TIME
LANGUAGE SELECT
REC
SPEED – –
or
Available program number flashes.
• You can set a program one year in advance.
Select an empty program number.
Then press [B] to go to next step.
PROGRAM NUMBER
DATE – – / – –
START TIME – – : – – – –
1
3
Select the desired start time (hour)
END
TIME – – : – – – –
– –
Then press [B] to go to next step.
CHANNEL
or
REC
SPEED – –
ONE TIME PROGRAM
PROGRAM NUMBER
or
1
DATE
1 0 / 0 5 MON
START TIME 0 7 : 3 0 – –
Select “ONCE”, “DAILY” (Mon-Fri), or “WEEKLY”.
Then press [B] to go to next step.
END
CHANNEL
TIME – – : – – – –
– –
PROGRAM NUMBER
1
REC
SPEED – –
B
ONCE
DAILY
WEEKLY
or
or
12
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Select “AM” or “PM”.
Then press [B] to go to next step.
Press [SUBTITLE/T-SET] to set timer standby mode.
SUBTITLE
T-SET
ONE TIME PROGRAM
PROGRAM NUMBER
1
DATE
1 0 / 0 5 MON
START TIME 0 7 : 3 0 PM
END
TIME – – : – – – –
– –
or
• TIMER indicator on the front panel lights up. The unit will
change to the DVD mode.
CHANNEL
REC
SPEED – –
AM
PM
B
Repeat the procedure in steps 5 and 6 to set the end time.
8
To Check, Correct or Cancel a Timer Program
Select the desired channel.
1) Press [SUBTITLE/T-SET] then, [VCR] on the remote control.
2) Select main menu by pressing [MENU]
3) Select “TIMER PROGRAMMING” by using [K/L], then press
[B]
4) Select the program number which you want to check by
using [K/L]. The details of the program you selected will
appear on the TV screen.
Then press [B] to go to next step.
ONE TIME PROGRAM
PROGRAM NUMBER
DATE 1 0 / 0 5 MON
START TIME 0 7 : 3 0 PM
1
END
CHANNEL
REC
TIME 0 8 : 3 0 PM
1 6
SPEED – –
or
• If you have connected the unit to a cable box or satellite box
as the connection on page 6, select the VCR to channel 3 or
4 (the RF output channel of the VCR). Then, select the desired
channel at the cable box or satellite box. Leave the cable box or
satellite box on for Timer Recording.
•
Go to the digit you want to change by using [s / B]. Then,
enter correct numbers by using [K/L]
•
You may cancel the entire program by pressing [s] while
the program number blinks.
5) Press [CLEAR/C.RESET] to exit.
6) Press [SUBTITLE/T-SET] to return to timer standby mode.
Select the desired recording speed, then press
[CLEAR/C.RESET]
ONE TIME PROGRAM
PROGRAM NUMBER
1
CLEAR/
C. RESET
DATE
1 0 / 0 5 MON
To cancel a Timer Recording in progress
START TIME 0 7 : 3 0 PM
END
TIME 0 8 : 3 0 PM
1 6
or
CHANNEL
Press [STOP/EJECT
C
A] on the unit.
REC
SPEED SP
B
SP
SLP
• To set another program after step 9, press [B]
Then, continue with step 2.
Hints for OTR and Timer Recording
Press [VCR] on the remote control before you set Timer Recording. Make sure the remote control is in the VCR mode, then
press [SUBTITLE/T-SET].
• If a tape is not in the unit or does not have the record tab, TIMER indicator on the front panel blinks and Timer Recording cannot be
performed. Please insert a recordable tape.
• When Timer Recordings are set, TIMER indicator on the front panel lights up. To use the VCR as usual until the time for the recording,
press [SUBTITLE/T-SET] so that TIMER indicator light turns off. Press [VCR/TV] to choose the VCR position. Select either VCR or DVD
mode, then continue with the other features as described in this manual.
After an OTR or a Timer Recording has been set, this unit operates as follows:
• If a tape runs out before an OTR or a Timer Recording is finished, the unit ejects the tape. Press [SUBTITLE/T-SET] on the remote
control or [STOP/EJECT
C
A] on the unit, then press [VCR] to activate the VCR function again.
• Once the unit turns to the timer standby mode, no VCR functions are available until [SUBTITLE/T-SET] is pressed.
• To cancel the timer standby mode, press [SUBTITLE/T-SET] on the remote control or [STOP/EJECT
C
A] on the unit, then press
[VCR] to activate the VCR function again.
• The mode of the unit and the remote control may differ (VCR mode or DVD mode) when you set Timer Recording or after you can-
celed Timer Recording. Press [VCR] or [DVD] on the remote control to select your desired mode before you operate.
When an OTR or a Timer Recording is completed...
• If Auto Power Off for DVD has been activated and there are Timer Recordings on standby, the unit turns off automatically, and TIMER
indicator on the front panel lights to indicate the unit is in the timer standby mode.
• TIMER indicator on the front panel flashes if there are no more Timer Recordings on standby.
• If Auto Power Off for DVD has NOT been activated, the unit switches to the DVD mode and all the VCR functions will be unavailable.
All the DVD functions are available during OTR, timer standby mode and Timer Recording.
• Press [STOP/EJECT
• Press [SOURCE] on the front panel or [VCR] on the remote control to use the VCR when the unit is on. In case Timer Recording is in
standby mode, press [STOP/EJECT A] on the front panel or [SUBTITLE/T-SET] on the remote control, and then press [SOURCE]
C
A] on the front panel or [SUBTITLE/T-SET] on the remote control to use the VCR when the unit is off.
C
on the front panel or [VCR] on the remote control.
If you want to use the DVD player during a Timer Recording or while TIMER indicator on the front panel is on or blinking.
• Press [STANDBY-ON] to turn on the unit. Press [DVD] on the remote control to choose DVD mode, then continue with the other
DVD features as described in this manual.
NOTE (for Timer Recording) :
• If there is a power failure or the unit is unplugged for more than 30 seconds, clock and all timer settings will be lost.
13
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying a Video Tape
Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws.
(Back of TV)
(Back of another source)
(Back of DVD/VCR*)
DVD/VCR
AUDIO OUT
VCR
2
AUDIO OUT
1
or
ANT-IN
L
Connect
AUDIO IN
VIDEO IN
Connect
R
VIDEO OUT I
VIDEO OUT
ANT-OUT
RF cable
(supplied)
Audio/Video cables
(commercially available)
*Front input jacks are also available
1) Insert a pre-recorded tape into another VCR for playing.
2) Insert a tape with its record tab into this unit for recording.
3) Press [SPEED] on the remote control of the recording unit to
select the desired recording speed (SP/SLP).
4) Select the “L1” or “L2” position on the recording unit.
• To use the input jacks on the back of this unit, select “L1”
position by pressing [0], [0], [1] on the remote
control or [CHANNEL K/L] on this unit.
• To use the input jacks on the front of this unit, select “L2”
position by pressing [0], [0], [2] on the remote
control or [CHANNEL K/L] on this unit.
5) Press [RECORD] on the recording unit.
6) Begin playback of the tape in another source.
7) To stop recording, press [STOP/EJECT
C
A] on the record-
ing unit, then stop playback of the tape in another source.
14
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Before: Turn on the TV, amplifier and any
STANDBY-ON
POWER ON
OPEN/CLOSE
other equipment which are connected to this
unit. Make sure the TV and audio receiver
(commercially available) are set to the correct
channel.
REC
STOP/EJECT PLAY
TIMER REC
RECORD
VCR
DVD
DISC IN PLAY
STOP PLAY NEXT
REW
F.FWD
CHANNEL
SOURCE
PREV
VIDEO
AUDIO
IR
DVD
Lights up when power is on.
OPEN/CLOSE
/EJECT
Press [STANDBY-ON] to turn on the
STANDBY-ON
SPEED
AUDIO
DVD/CD Player.
1
4
7
2
5
8
3
6
9
SKIP/CH.
Press [OPEN/CLOSE A] and insert a
disc with label facing up.
VCR/TV
SLOW
Press [PLAY B] to start playback.
0
VCR
+10
DVD
DISPLAY
PAUSE
Press [STOP C] to stop playback.
PLAY
STOP
DVD menu
DVD
Fast Forward / Reverse Search
DVD
playback. Use [K / L / s / B] to select an item, then press
[ENTER] (or [PLAY B]).
Use [g] or [h] repeatedly during playback
E
1
to select the required forward or reverse speed.
Calling Up a Menu Screen during Playback
To continue playback, press [PLAY B]
DVD
[MENU] to call up the DVD menu.
• Press [TOP MENU] to call up the title menu.
DVD
Resume
1
DVD
[g] or [h] repeatedly in the pause
mode to select the required forward speed.
Press [STOP C] during playback.
To continue playback, press [PLAY B]
Resume message will appear on the
Resume ON
TV screen. Press [PLAY B], playback
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
will resume from the point at which
playback was stopped.
Zoom
DVD
Paused and Step-by-Step Playback
[ZOOM] repeatedly during playback to select the
required zoom factor: x2, x4 or OFF.
DVD
x2
x4
Press [PAUSE F] during playback.
To continue playback, press [PLAY B]
DVD
2) Use [K / L / s / B] to slide the zoomed picture across the screen.
[PAUSE F] is
pressed in the pause mode.
3) To exit zoom function, press [ZOOM] repeatedly to select OFF.
To continue playback, press [PLAY B]
To use [PREV H / E], [NEXT D / G] on this unit
DVD
Press once to skip chapters or tracks to a desired point.
Press and hold to change forward or reverse playback speed.
15
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SEARCH MODE does not work during Programmed or Random Playback.
Using Track Search
Using Time Search
DVD
DVD
Operations described in this manual are
mainly based on the remote control.
[SEARCH MODE] repeatedly until the Time Search
display appears.
SEARCH
MODE
SEARCH
/29
TOTAL 1:29:00
MODE
PLAY
1
2
5
8
0
3
6
9
1
4
7
2
5
8
0
3
6
TOTAL 1:29:00
4
7
/29
9
+10
within 30 seconds
within 30 seconds
• For the disc with less than 10 tracks, press the track number
directly.
• For discs with more than 10 but less than 99 tracks, to play
singledigit track, press [0] first, then the track number (e.g. for
track 3, press [0] [3]). To play a double-digit track, press the
track number.
• For discs with more than 100 tracks, to play a single or a double-
digit track, press [0] first, then the track number (e.g. for track
3, press [0] [0] [3], and for track 26, press [0] [2] [6]). To play a
triple-digit track, press the track number.
Marker Setup
DVD
This feature allows you to assign a specific point on a disc to be
called back later.
Using [SKIP/CH. G/K HL
To set a marker
Current Track
SKIP/CH.
SKIP/CH.
Press [SEARCH MODE] repeatedly until the marker display
appears.
PLAY
TR 1 TR 2 TR 3 TR 4
SEARCH
MODE
SKIP
SKIP
PLAY
ENTER
Using Title / Chapter Search
ENTER
DVD
Press [SEARCH MODE] once for the chapter search.
[SEARCH MODE] repeatedly until the marker display
Press [SEARCH MODE] twice for the title search.
appears.
SEARCH
SEARCH
MODE
MODE
/12
PLAY
1
4
7
2
5
8
0
3
6
ENTER
/12
9
+10
within 30 seconds
Press [ENTER] at the desired marker.
Using [SKIP/CH. G/KHL
ENTER
Current Chapter
CH 1 CH 2 CH 3 CH 4
PLAY
SKIP
SKIP
Press [RETURN]
or
RETURN
Current Title
(TT)
SKIP/CH. SKIP/CH.
TT 1 TT2 TT3 TT4
SKIP
SKIP
16
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display
You can check the information about the current disc by pressing [DISPLAY] on the remote control.
DVD
DVD
CH(Chapter):
Current chapter number / Total chapters
TR(Track):
Current track number / Total tracks
Remaining time of the current chapter
Current playback status
Remaining time of the current
track
4/12 0:03:21 - 0:02:15
T
11/16 0:00:00 - 0:03:30
Current playback status
Angle icon appears only in a case
multi-angel is available on the DVD.
Elapsed time of the current
track
DISPLAY
Elapsed time of the current chapter
DISPLAY
TT(Title):
Current title number / Total titles
ALL:
Current track number / Total tracks
Remaining time of the current title
Remaining time of the entire disc
1/3 0:00:00 - 1:23:45
4/12 0:13:45 - 0:45:40
T
Current repeat setting appears
only when the repeat setting
is active.
Elapsed time of the current title
DISPLAY
DISPLAY
T: Track repeat
A: All Tracks repeat
B: A-B repeat
BIT RATE:
The amount of audio and video
data currently being read
A
Elapsed time of the entire disc
Layer numbers appears only when
playing a two-layered disc.
L0: Layer 0 is playing
T
L1
L1: Layer 1 is playing
Current repeat setting appears only
when the repeat setting is active.
C: Chapter repeat
DISPLAY
T: Title repeat
B: A-B repeat
A
17
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat / Random / Programmed Playback
Repeat Playback
Repeat A-B Playback
Programmed Playback
DVD
DVD
DVD
Repeat function is available only during
playback.
You may determine the order in which
chapters or tracks will play.
PLAY
A-B
A-
PLAY
CHAPTER
MODE
CD-DA
TOTAL 0:00:00
REPEAT
<Example : DVD>
Each time you press [REPEAT], repeat
function changes as example below.
A-B
A-B
at your desired ending point (B)
• Point B should be in the same title or
track as point A.
OFF
(repeat off)
ENTER
or
CHAPTER
TITLE
(current chapter repeat)
(current title repeat)
CD-DA
TOTAL 1:03:30
1
5
3:30
5:10
10 4:20
11 3:00
12 3:20
17 4:10
22 2:50
2/3
(repeat off)
OFF
TRACK
ALL
(current track repeat)
(entire disc repeat)
Random Playback
• Up to 99 tracks can be ordered.
• If eight or more tracks were in a
program, use [SKIP/CH. G /K H/
to see all the tracks.
DVD
L]
This function shuffles the playing order
of chapters or tracks instead of play-
back in sequence.
PLAY
RANDOM
CD-DA
TOTAL 0:45:55
MODE
RANDOM PROGRAM
--no indication--
PLAY
PLAY
18
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Settings
Subtitle Language
Each time you press [AUDIO], the audio
language changes as example below.
Stereo Sound Mode
DVD
DVD
ENG
SPA
FRE
(English audio)
(Spanish audio)
(French audio)
This unit allows you to select a subti-
tle language (if available) during DVD
playback.
This unit allows you to select a sound
mode during CD playback.
PLAY
PLAY
STEREO
1. ENG/6
AUDIO
SUBTITLE
T-SET
Each time you press [AUDIO], sound
mode changes as example below.
Each time you press [SUBTITLE/T-SET]
subtitle language changes as example
below.
STEREO (right and left channels
are active)
OFF
ENG
FRE
(no subtitles)
L-ch
R-ch
(left channel is active)
(right channel is active)
(English subtitles)
(French subtitles)
Camera Angles
Virtual Surround
DVD
DVD
To set subtitle ON/OFF
Some DVD discs may
You can enjoy stereophonic virtual world on
your existing 2 channel stereo system.
contain scenes which have
been shot simultaneously
from various angles. You can
PLAY
1. ENG/6
PLAY
SUBTITLE
T-SET
change the camera angle if the
icon
OFF
appears on the screen. If the “ANGLE
ICON” setting is “OFF” in the OTHERS
MODE
menu, the
icon will not appear. (Refer
ENTER
OFF
to pages 20-22.)
Press twice.
(once for CD)
PLAY
1/8
ANGLE
ENTER
1
Black Level Setting
1:
Natural effect
DVD
2:
OFF:
Emphasized effect
No effects (original sound)
Adjust the Black Level Setting to make the
dark areas of the TV picture brighter.
RETURN
PLAY
ON
MODE
Audio Language
DVD
OFF
ENTER
language (if multiple languages are avail-
able on disc) during DVD playback.
ON: Makes the dark areas brighter.
OFF: Shows the original picture as recorded.
PLAY
RETURN
1. ENG Dolby D 5.1ch 48k/3
AUDIO
19
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
DVD Setup
You can select the “PLAYER MENU”, “TV ASPECT” or “DOLBY DIGITAL” from the QUICK SETUP menu quickly.
SETUP
or
STOP
SETUP
QUICK
ENGLISH
<SETUP MENU>
ENTER
P20
P21
P21
Step 5
Step 5
Step 5
Confirm that “QUICK” is selected.
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
4:3 LETTER BOX
BITSTREAM
SETUP
QUICK
CUSTOM
INITIALIZE
ENTER
• Refer to the sections “PLAYER MENU”, “TV ASPECT”
or “DOLBY DIGITAL” section on page 20 or 21.
You can change the settings of the unit.
on pages 20-21 indicates DVD Setup menus also accessible from the QUICK SETUP menu.
Select “CUSTOM”.
Select the desired item.
SETUP
ENTER
STOP
or
or
<SETUP MENU>
ENTER
SETUP
CUSTOM
SETUP
SETUP
LANGUAGE
DISPLAY
AUDIO
PARENTAL
OTHERS
QUICK
CUSTOM
INITIALIZE
QUICK
CUSTOM
INITIALIZE
LANGUAGE menu
DISPLAY menu
AUDIO menu
PARENTAL menu
SETUP
LANGUAGE
SETUP
DISPLAY
SETUP
PARENTAL
SETUP
OTHERS
SETUP
AUDIO
PASSWORD
AUDIO
ORIGINAL
OFF
ENGLISH
ENGLISH
TV ASPECT
STILL MODE
4:3 LETTER BOX
AUTO
ANGLE ICON
AUTO POWER OFF ON
ON
DRC
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
ON
Please enter a 4-digit password.
SUBTITLE
DISC MENU
PLAYER MENU
page 20
page 21
page 21
page 22
page 22
LANGUAGE Setting
Follow steps 1 to 3 in the “CUSTOM Menu” section on above.
5 Select the desired language.
Select the desired item.
ENTER
ENTER
SETUP
or
or
AUDIO: *1 *2
AUDIO
ORIGINAL
ENGLISH
FRENCH
(Default: ORIGINAL)
Sets the audio language.
LANGUAGE menu
SUBTITLE: 1 2
(Default: OFF)
Sets the subtitle language.
SUBTITLE
OFF
ENGLISH
FRENCH
SETUP
LANGUAGE
AUDIO
ORIGINAL
SUBTITLE
DISC MENU
PLAYER MENU
OFF
ENGLISH
ENGLISH
DISC MENU: 1
(Default: ENGLISH)
Sets the language for DVD
DISC MENU
ENGLISH
FRENCH
SPANISH
PLAYER MENU:
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
(Default: ENGLISH)
Sets the language for the
On-screen display.
20
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY Setting
You can change the display functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 20.
Select the desired item.
5
To exit the menu
TV ASPECT:
SETUP
(Default: 4:3 LETTER BOX)
See Hint on the right.
or
TV ASPECT
ENTER
TV ASPECT
STILL MODE
4:3 LETTER BOX
AUTO
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
ENTER
or
DISPLAY menu
SETUP
DISPLAY
STILL MODE:
(Default: AUTO)
See Hint on the right.
TV ASPECT
STILL MODE
4:3 LETTER BOX
AUTO
STILL MODE
ENTER
TV ASPECT
STILL MODE
4:3 LETTER BOX
AUTO
AUTO
FIELD
FRAME
ENTER
or
AUDIO Setting
Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow steps 1 to 3 in the
“CUSTOM Menu” section on page 20.
5
6 To exit the menu
Select the desired item
DRC (Dynamic Range Control):
(Default: ON)
SETUP
Set to “ON” to compress the range between soft and loud sounds.
or
DRC
ON
OFF
DOWN SAMPLING ON
ON
DOLBY DIGITAL
BITSTREAM
BITSTREAM
ENTER
AUDIO menu
DOWN SAMPLING:
(Default: ON)
Set to “ON” when outputting in 48kHz.
SETUP
AUDIO
DRC
ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
Set to “OFF” when outputting the original sound.
DRC
ON
ON
OFF
DOWN SAMPLING ON
DOLBY DIGITAL
BITSTREAM
BITSTREAM
ENTER
DOLBY DIGITAL:
(Default: BITSTREAM)
Set to “BITSTREAM” when the unit is connected to a Dolby Digital
decoder.
• BITSTREAM: outputs a Dolby Digital Signals.
• PCM: converts the Dolby Digital into PCM (2 channel).
DRC
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
ON
ON
ON
PCM
ENTER
21
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
PARENTAL Setting
Parental Control limits the disc viewing that exceed your settings. (An incorrect password will not be acceptable.)
This feature prevents your children from viewing inappropriate materials.
Parental Levels
Parental Level allows you to set the rating levels of your DVD discs. Playback will stop if the ratings exceed the levels you set. Follow
steps 1 to 3 in the “CUSTOM Menu” section on page 20.
4 Enter your desired four-digit
password.
SETUP
1
4
7
2
5
8
0
3
6
9
or
or
ENTER
ENTER
ENTER
PARENTAL LEVEL
ALL
PARENTAL LEVEL
PASSWORD CHANGE
ALL
8 [ADULT]
7 [NC-17]
6 [R]
CONTROL LEVELS
• ALL:
All parental locks are cancelled.
SETUP
PARENTAL
• Level 8:
DVD softwares of any grades (adult/general/children) can be played back.
PASSWORD
Please enter a 4-digit password.
• Levels 7 to 2:
• Level 1:
Only DVD softwares intended for general use and children can be played back.
Only DVD softwares intended for children can be played back, with those
intended for adult and general use prohibited.
TIPS FOR LEVELS
• 8 [ADULT]:
• 7 [NC-17]:
DVD softwares of any grades (adult/general/children) can be played back.
No one under 17 admitted
If you have set a password
already, enter the current
four-digit password.
• 6 [R]: Restricted; under 17 requires accompanying parent or adult guardian
• 5 [PGR]:
• 4 [PG13]:
• 3 [PG]:
• 2 [G]: General Audience
• 1 [KID SAFE]:
Parental Guidance Recommended
Unsuitable for children under 13
Parental Guidance suggested
SETUP
PARENTAL
PASSWORD
Suitable for children
Enter current password.
To Change the Password for Parental Controls
You can change your password for parental controls. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 20.
Enter current four-digit
password.
SETUP
1
4
7
2
5
8
0
3
6
9
1
4
7
2
5
8
0
3
6
9
or
ENTER
ENTER
PARENTAL LEVEL
PASSWORD CHANGE
ALL
PARENTAL menu
SETUP
PASSWORD
Please enter a 4-digit password.
PARENTAL
SETUP
PARENTAL
PASSWORD
Enter current password.
OTHERS Setting
You can change the other functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 20.
4 Select the desired item.
5
ANGLE ICON:
(Default: ON)
SETUP
Set to “ON” to show the angle icon when multiple camera
angles are available during DVD playback.
or
OFF
ON
ANGLE ICON
AUTO POWER OFF ON
ON
ENTER
OTHERS menu
SETUP
OTHERS
AUTO POWER OFF:
(Default: ON)
ANGLE ICON
AUTO POWER OFF
ON
ON
Set to “ON” to turn this unit off automatically after 30 minutes of no use.
ANGLE ICON
ON
ON
AUTO POWER OFF ON
OFF
ENTER
22
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Reset to the Default Setting (Except for PARENTAL Setting)
To exit the
menu
SETUP
STOP
SETUP
or
or
ENTER
ENTER
<SETUP MENU>
Press
twice.
SETUP
SETUP
INITIALIZE
SETUP
QUICK
CUSTOM
INITIALIZE
Initialize?
NO
YES
QUICK
CUSTOM
INITIALIZE
Troubleshooting Guide
If this unit does not perform properly when operated as instructed in this Owner's Manual, check this unit consulting the following checklist.
PROBLEM
CORRECTIVE ACTION
No power.
• Make sure the power plug is connected to an AC outlet.
• Make sure the power is turned on.
This unit does not respond to • Check if the power plug is connected to an AC outlet.
• Check the batteries in the remote control.
the remote control.
• Aim the remote control directly at the remote sensor. If necessary, remove all the obstacles between the sensor and the remote control.
• You have to be within 23 feet (7m) of this unit.
• Check if the right mode is selected. If it’s not in the right mode, press [DVD] or [VCR], whichever you need, on the remote control.
• Check if a cassette tape is in this unit.
• Tune your radio to an empty AM station so that you hear a lot of noises. Turn the volume up, then if you hear some signal sound from the radio in
response to your pressing buttons on the remote control, the remote control is working.
Poor picture or noise.
• Interference signal may be received. Change the position and orientation of the unit.
Timer recording is impossible. • Make sure the Timer Recording is set correctly.
• Make sure TIMER REC indicator on the front panel lights up. If not, press [SUBTITLE/T-SET]
• Make sure the VCR clock is set correctly.
Cannot go into record mode.
• Make sure the tape has a record tab. If needed, cover the hole with adhesive tape.
• Activate this unit in VCR mode. Press [VCR] on the remote control so that the VCR OUTPUT light is lit.
Playback picture is partially
noisy.
• Adjust tracking control for a better picture by pressing [CHANNELL/K] on the unit or [SKIP/CH. G/K H/L] on the remote control.
Cannot view a tape but the
audio is OK.
• Head cleaning may be necessary. Refer to “AUTO HEAD CLEANING”.
• Make sure the VCR is not in the Menu mode.
No or poor, playback picture.
• Change the RF output channel to CH4. Then select the same channel on the TV.
• Fine tune your TV.
TV programs cannot be seen
normally.
• Re-check the ANT-IN and ANT-OUT connections. See the front page and page 6.
• Press [VCR]
• Press [VCR] on the remote control to activate it in the VCR mode. Check if the VCR OUTPUT light is lit, then set it to the TV position by pressing [VCR]
Video or color fades in and
out when making a copy of a
video tape.
• You cannot copy a copyrighted video tape. You are experiencing copy guard protection.
Cannot remove the tape.
No picture.
• Check if this unit is in the VCR mode. If not, press [VCR] on the remote control to switch the mode.
• Connect the video cable firmly.
• Insert a correct video disc that plays on this unit.
• Press [DVD] on the remote control. Check if the DVD OUTPUT light is lit. Then try other DVD features.
Disc cannot be played.
No sound.
• Insert the disc.
• Clean the disc.
• Place the disc correctly with the label side up.
• Cancel the parental lock or change the control levels.
• Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its surface.
• Connect the audio cable firmly.
• Turn the power of the audio component on.
• Correct the audio output settings.
• Correct the input settings on the audio component.
No DTS audio is output
Distorted picture.
• This unit does not support DTS audio.
-This is not a malfunction.
• Connect this unit directly to the TV.
• There are some cases where pictures may be slightly distorted, and those are not a sign of a malfunction.
• Although pictures may stop for a moment, this is not a malfunction.
Audio or subtitle language
does not match the setup.
• The selected language is not available for audio or subtitles on the DVD.
-This is not a malfunction.
The camera angle cannot be
changed.
• The DVD does not contain sequences recorded from different camera angles.
-This is not a malfunction.
Audio or subtitle language
cannot be changed.
• The DVD does not contain audio source or subtitles in the selected language.
-This is not a malfunction.
“Prohibited icon” appears on
the screen, prohibiting an
operation.
• That operation is prohibited by this unit or the disc.
-This is not a malfunction.
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s Manual for details on correct
operations.
• Playback from a desired track and random playback are not available during program playback.
• Some functions are prohibited on some discs.
23
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
• Designs and specifications are subject to
change without notice.
• If there is a discrepancy between
languages, the default language will be
English.
Video Heads :
Operating temperature :
41°F (5°C) to 104°F (40°C)
Dimensions :
Four Heads
Output signal format :
NTSC color
W : 17 3/16”
(435mm)
H
D
: 3 3/4”
: 9 3/16”
(94mm)
(233mm)
Power source :
120 V AC +/- 10%, 60 Hz +/- 0.5%
Power consumption :
18 W (standby: 2.8W)
Weight :
Approx 6.0lbs
(2.7kg)
Language Code List
Language
Code
Language
Code
Language
Code
Language
Code
A-B
French [FRE]
Frisian
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
Macedonian
Malagasy
Malay
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
Siswat
6565
6557
6558
6561
5165
6567
6569
6568
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
Slovak [SLO]
Slovenian
Somali
Galician
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Malayalam
Maltese
Maori
Spanish [SPA]
Sundanese
Swahili
Marathi
Moldavian
Mongolian
Nauru
Swedish [SWE]
Gujarati
Hausa
Hebrew
Hindi
Hungarian [HUN]
T
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
Nepali
Norwegian [NOR]
O-R
I-K
Occitan
Oriya
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
6467
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
Oromo(Afan)
Panjabi
Pashto;Pushto
Persian
Bulgarian [BUL]
Burmese
Byelorussian
Irish [IRI]
Polish [POL]
Portuguese [POR]
Quechua
Italian [ITA]
Japanese [JPN]
Javanese
C-E
Cambodian
Catalan
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
U-Z
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean [KOR]
Kurdish
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
Chinese [CHI]
Corsican
S
Croatian
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
Czech [CZE]
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
L-N
Yiddish
Yoruba
Zulu
Laothian
Latin
Latvian;Lettish
Lingala
Lithuanian
5861
5847
5868
5860
5866
F-H
Setswana
Shona
Sindhi
Faroese
Fiji
Finnish [FIN]
5261
5256
5255
Singhalese
FUNAI CORP. will repair this product, free of charge in the CANADA in
the event of defect in materials or workmanship as follows:
DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE
INABILITY
DURATION:
TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER
LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES
INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FITNESS FOR
A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS
REPRESENTATIVES IN CANADA. ALL WARRANTY INSPECTIONS AND
REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER.
THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO AN
AUTHORIZED SERVICE CENTER.
PARTS: FUNAI CORP. will provide parts to replace defective parts
without charge for one (1) year from the date of original retail
purchase. Certain parts are excluded from this warranty.
LABOR: FUNAI CORP. will provide the labor without charge for a
period of ninety (90) days from the date of original retail pur-
chase.
LIMITS AND EXCLUSIONS:
This warranty is extended only to the original retail purchaser. A pur-
chase receipt or other proof of original retail purchase will be required
together with the product to obtain service under this
warranty.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY
HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. IF, AT ANY
TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN
SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT
FUNAI CORP.
This warranty shall not be extended to any other person or
transferee.
This warranty is void and of no effect if any serial numbers on the prod-
uct are altered, replaced, defaced, missing or if service was attempted
by an unauthorized service center. This limited
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS
PRODUCT WITHOUT PRIOR NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:
warranty does not apply to any product not purchased and used in
CANADA.
To obtain warranty service, you must take the product, or deliver the
This product is produced for home use and this warranty only covers
failures due to defects in material or workmanship which occurs dur-
ing normal use. It does not cover damage which occurs in shipment, or
failures which are caused by repairs, alterations or product not supplied
by FUNAI CORP., or damage which results from accident, misuse, abuse,
mishandling, misapplication,
alteration, faulty installation, improper maintenance, commercial use
such as hotel, rental or office use of this product or damage which
results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY
ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS,
COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO
EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL
product freight prepaid, in either its original
packaging or packaging affording an equal degree of protection, to any
AUTHORIZED SERVICE CENTER. FUNAI CORP. will not reimburse you for
any service done by unauthorized service
providers without prior written approval.
To locate your nearest AUTHORIZED SERVICE CENTER or for general
service inquiries, please contact us at:
FUNAI SERVICE CORPORATION
Tel :1-800-605-8610
2200 Spiegel Drive, Groveport, OH 43125
24
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Use Guide
Press [B] to start Auto Set Up.
Connections
CH 01
1
Please refer to “Basic TV Connection” on the front page before
you use this unit.
AUTO SET UP
RF Output Channel
If channel 3 has been already occupied for broadcasting,
1) Set your TV to channel 4.
2) Insert a pre-recorded tape into this unit.
3) Press [SOURCE] on the unit so that the VCR SOURCE light is
lit.
• If noise appears on the TV screen, press [VCR/TV] on the
remote control.
4) Press [PLAY B] once.
5) After a few seconds, press and hold [PLAY B] on the unit for
3 seconds.
• The RF output channel will change to channel 4 from channel
3 and you will see a playback picture.
• When a picture does not appear on the TV screen, repeat
step 4.
6) Press [STOP C] to stop playback.
Clock Setup
5
VCR
Installing the Batteries for the Remote
Control
2
- M E N U -
Press [MENU] and select “CLOCK SET“.
Then press [B] to go to next step.
1
TIMER PROGRAMMING
2
AUTO REPEAT [OFF]
CHANNEL SET UP
3
B
CLOCK SET
MENU
LANGUAGE SELECT
or
• If the clock is not set, the CLOCK SET screen appears when you
press [MENU]. In this case, go to step 2.
VCR/DVD Switching
3
CLOCK SET
Select the current month.
Then press [B] to go to next step.
3
MONTH DAY
1 0 – –
YEAR
– – – –
/
DVD PLAYER VCR CMWD 2206
/
OPEN/CLOSE
OPEN/CLOSE
/EJECT
STANDBY-ON
SPEED
AUDIO
HOUR MINUTE
– – – –
AM/PM
– –
:
VCR
DVD
DISC IN
STOP
PLA
Y
or
CHANNEL
SOURCE
PREV
PLAY
NEXT
1
4
7
2
5
8
3
6
9
SKIP/CH.
VCR/TV
SLOW
0
VCR
+10
DVD
VCR button
DVD button
DISPLAY
PAUSE
CLOCK SET
Select the current day.
Then press [B] to go to next step.
MONTH DAY
YEAR
– – – –
PLAY
1 0 0 5
/
STOP
SOURCE button
RECORD
MENU
VCR
DVD
HOUR MINUTE
– – – –
AM/PM
– –
ENTER
:
SOURCE
or
SETUP TOP MENU
RETURN
SEARCH
MODE
CLEAR/
C. RESET
MODE
ZOOM
DVD SOURCE light
VCR SOURCE light
SUBTITLE
T
-SET
ANGLE
REPEAT
A-B
CLOCK SET
Select the current year.
Then press [B] to go to next step.
5
MONTH DAY
1 0 0 5
YEAR
2 0 0 9
/
HOUR MINUTE
AM/PM
– –
– –
:
– –
or
VCR MODE
Press [VCR] on the remote control. (Verify that the VCR SOURCE
Select the current hour.
Then press [B] to go to next step.
CLOCK SET
light is lit.)
MONTH DAY
1 0 0 5 MON
YEAR
2 0 0 9
/
DVD MODE
Press [DVD] on the remote control. (Verify that the DVD SOURCE
light is lit.)
HOUR MINUTE
0 5 – –
AM/PM
– –
:
or
CLOCK SET
Select the current minute.
Then press [B] to go to next step.
MONTH DAY
1 0 0 5 MON
YEAR
2 0 0 9
/
HOUR MINUTE
0 5 4 0
AM/PM
– –
:
or
CLOCK SET
Select “AM” or “PM”.
Turn on the Unit for the First Time
4
MONTH DAY
1 0 0 5 MON
YEAR
2 0 0 9
/
VCR
HOUR MINUTE
0 5 4 0
AM/PM
P M AM
or
:
B
PM
Turn on the TV and set it to channel 3.
• If channel 3 has been already occupied for
broadcasting, see “RF Output Channel” section.
To exit the CLOCK SET screen
Select your language when turning this unit on for the first time.
Then press [B] to go to next step.
LANGUAGE SELECT
B
ENGLISH
FRANCAIS
ESPAÑOL
[ON]
STANDBY-ON
or
25
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Use Guide
DVD mode
VCR mode
VCR Playback
6
Disc/Tape
Button
(Alphabetical order)
Before: Turn
• If channel 3 has been already oc-
cupied for broadcasting, see “RF
Output Channel” section.
1
4
7
2
5
8
0
3
6
• To select channel.
• The +10 button has no effect
in VCR mode.
• To select chapter or title
directly.
• To select track directly.
9
+10
To search forward/backward
through a disc.
To begin slow forward
playback in the pause mode.
VCR
• To search forward/backward
through a disc.
• To forward/backward a tape.
A-B
• To repeat between your cho-
sen point of A and B.
To repeat between your
chosen point of A and B.
To start
playback
4
ANGLE
AUDIO
• To select camera angles on a
disc.
PLAY
• To select audio languages on
a disc.
• To select STEREO, L-ch or R-ch.
• To remove status number in
program input.
• To remove status number in
program input.
To stop
playback
To eject the
cassette
CLEAR/
C. RESET
• To exit the VCR Menu.
• To reset the tape counter.
• To clear the numbers entered • To clear the numbers entered
incorrectly.
incorrectly.
OPEN/CLOSE
/EJECT
To cancel the point for A-B repeat. To cancel the point for A-B repeat.
STOP
DISPLAY
DVD
• To display the current disc
mode.
• To display the current disc
mode.
• To display the current time,
tape counter, and channel.
To select the DVD output mode.
• To activate the remote
control in DVD mode.
To select the DVD output mode.
• To activate the remote
control in DVD mode.
DVD/CD Playback
7
To select an item
on the VCR Menu.
To advance to the
next VCR Menu.
To go back one
step during clock
and timer setting.
Before: Turn on the TV, amplifier and any
other components which are connected
to this unit. Make sure the TV and audio
receiver (commercially available) are set
to the correct channel.
ENTER
• To move the cursor and deter- • To move the cursor and deter-
mine its position.
mine its position.
MENU
MODE
To call up the Menu on a disc.
• To call up the VCR Menu.
DVD
• To arrange the playing order
or play randomly.
• To set black level on/off.
• To set virtual surround on/off.
• To arrange the playing order
or play randomly.
To set virtual surround on/off.
1
2
OPEN/CLOSE
/EJECT
OPEN/CLOSE
/EJECT
STANDBY-ON
• To eject the video
cassette from the VCR.
• To open or close the disc tray. • To open or close the disc tray.
• To pause tape playback or
recording.
• To advance playback one
frame at a time.
• To pause disc playback.
• To advance playback one
frame at a time.
PAUSE
Insert a disc with
label facing up.
• To pause disc playback.
• To begin disc playback.
To stop
playback
To start
playback
• To begin disc playback.
• To begin tape playback.
PLAY
RECORD
• To start a recording or One
Touch Recording.
STOP
PLAY
REPEAT
RETURN
• To play a chapter or title
repeatedly.
• To play a track or disc repeat-
edly.
• To return to the previous
operation in menu.
• To search chapter, title or
time.
• To return to the previous
operation in menu.
• To search track.
• To search time.
Remote Control
8
SEARCH
MODE
• To call up the index or time
search menu.
• To set or search the markers. • To set or search the markers.
OPEN/CLOSE
/EJECT
STANDBY-ON
SETUP
SPEED
AUDIO
• To call up the DVD setup
menu.
• To call up the DVD setup
menu.
1
4
7
2
5
8
3
6
9
• To change channels.
SKIP/CH.
SKIP/CH.
SKIP/CH.
• To skip chapters or titles.
• To skip tracks.
• To adjust the tracking manu-
ally during playback.
VCR/TV
SLOW
SLOW
• To view the tape in slow
motion.
0
VCR
+10
DVD
DISPLAY
PAUSE
SPEED
• To select the recording speed.
PLAY
• To turn the unit on or to turn • To turn the unit on or to turn • To turn the unit on or to turn
STOP
STANDBY-ON
the unit into the standby
the unit into the standby
the unit into the standby
RECORD
MENU
mode. (To completely turn off mode. (To completely turn off mode. (To completely turn off
the unit, you must unplug the the unit, you must unplug the the unit, you must unplug the
ENTER
AC power cord.)
AC power cord.)
AC power cord.)
SETUP TOP MENU
RETURN
• To stop playback or
recording.
STOP
• To stop playback.
• To stop playback.
SEARCH
MODE
CLEAR/
MODE
ZOOM
C. RESET
SUBTITLE
T-SET
SUBTITLE
T-SET
ANGLE
REPEAT
A-B
To put the VCR into standby
mode for a Timer Recording.
• To select subtitles on a disc.
TOP MENU
VCR
• To call up the Top Menu on a
disc.
To select the VCR output mode.
• To activate the remote
control in VCR mode.
VCR/TV
ZOOM
• To select DVD position or TV • To select CD position or TV
• To select VCR position or TV
position.
position.
position.
• To magnify part of a picture.
(x2 / x4)
E8C6BCD
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|