User guide
SAFETY
S M A R T . V E R Y S M A R T .
Know these
safety
symbols
MCR140 CLOCK RADIO
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Thank you for choosing Magnavox
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
NEED HELP FAST?
Read your Quick Use Guide and/or Owner's Manual
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
first for quick tips that make using your
Magnavox product more enjoyable.
This “bolt of lightning” indicates uninsulated material
within your unit which may cause an electrical shock.
For the safety of everyone in your household, please do not
remove product covering.
If you have read your instructions and still need
assistance, you may access our online help at
or call
1-800-705-2000
while with your product
(and Model / serial number)
The “exclamation point” calls attention to features for
which you should read the enclosed literature closely to
prevent operating and maintenance problems.
WARNING: WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
CAUTION: To prevent electric shock, match wide blade of plug to wide
slot, and fully insert.
MAGNAVOX
Philips Consumer Electronics North America
Knoxville, Tennessee 37914-1810, U.S.A.
Meet Philips at the Internet
MCR140
Printed in China
PDCC/JH - 523
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Back View (see fig. 3 )
CONTROLS
$ Battery door - opens to store a 9 volts 6F22 battery (not included) for clock
memory backup.
% TUNING - tunes to radio stations
^ FM/AM - selects FM/AM waveband
Top View (see fig. 1 )
1 SET TIME /ALARM OFF
& BRIGHTNESS (High or Low) -selects display brightness
* Power cord - for power supply and to improve FM reception
( VOLUME - adjusts the sound level
- sets the clock time
- stops the active alarm for 24 hours
- switches off the radio sleep function
2 SET ALARM 1 / SET ALARM 2 - sets the alarm time for alarm 1 / alarm 2
3 AL1/ AL2 /AL1+2 - selects which alarm(s) you want to set alarm time on
4 REPEAT ALARM - switches off the active alarm for a 7-8 minutes period
5 OFF/ ON/ AUTO/ BUZZ
OFF: switches off the radio/alarm
ON: switches on the radio
AUTO: activates the radio for alarm
BUZZ: activates the buzzer for alarm
6 TIME SET 3 - to adjust time fast forward
7 TIME SET 4 - to adjust time back
8 SLEEP
INSTALLATION
POWER SUPPLY
1
Check if the power supply, as shown on the type plate located on the bot-
tom of the set, corresponds to your local power supply. If it does not, consult
your dealer or service center.
2
3
Connect the power cord to the wall outlet.
To disconnect the set from the power supply completely, remove the
plug from the wall outlet.
- activates the radio for sleep function
- adjusts the sleep period
SELECTING DISPLAY BRIGHTNESS
This set allows you to choose high or low brightness of display.
Front View (see fig. 2 )
•
Adjust BRIGHTNESS switch (located on the rear of the set) to HIGH or LOW
position.
9 ALARM 1 indicator - lights up when alarm 1 is activated.
0 ALARM 2 indicator - lights up when alarm 2 is activated.
! DISPLAY - shows the clock/alarm time and status of the setting
@ Frequency pointer - shows the radio frequency of your selected waveband
# PM indicator -lights up when time is PM.
CLOCK MEMORY BACKUP
SETTING THE CLOCK TIME
The clock memory backup allows your alarm and clock time settings to be stored
for up to a day when there is a power interruption e.g. power failure. The com-
plete clock radio and display illumination will be switched off. As soon as the
power supply returns, the display will indicate the correct time.
The time is displayed using the 12-hour clock with PM indicator (PM off = AM).
1
2
Hold down SET TIME/ALARM OFF.
Press TIME SET 3 or
4
repeatedly, or hold down TIME SET 3 or
4
to adjust
minute and/or hour.
1
2
Remove the battery door to insert a 9 volts 6F22 type battery (not included)
-
-
TIME SET 3 : to adjust time fast forward
for backup.
TIME SET 4 : to adjsut time back
3
Release SET TIME/ALARM OFF and TIME SET 3 or
4
when you reach the
Replace the battery door.
correct setting.
™ The set clock time will show on the display and start to run.
NOTE: If no backup battery is installed or the power interruption is prolonged,
you will need to set the clock and alarm times again.
USING THE ALARM
Batteries contain chemical substances so they should be disposed of
properly.
This set allows you to set one alarm (alarm 1 or alarm 2), or set two alarms
simultaneously. This set also offers you two alarm modes: Auto (radio) and Buzz.
SETTING THE ALARM TIME
Standby power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2W
1
2
Hold down SET ALARM 1 or SET ALARM 2
Press TIME SET or repeatedly, or hold down TIME SET
adjust minute and/or hour.
Release SET ALARM 1 or SET ALARM 2, and TIME SET
3
4
3
or
4
to
RADIO
3
3
or
4
when you
You can use this set solely as a radio!
reach the desired time setting. The display will return to the clock time.
1
2
3
4
5
Adjust OFF/ ON/ AUTO/ BUZZ to ON to switch on the radio.
Select your waveband by adjusting the FM/AM switch
Adjust TUNING to tune to your desired station
Turn the VOLUME control to adjust the volume level
Adjust OFF/ ON/ AUTO/ BUZZ to OFF to switch off the radio.
.
SELECTING THE ALARM MODE
1
.
Adjust AL1/AL2/AL1+2 to AL1 (alarm 1), or AL2 (alarm 2), or AL1+2 (alarm 1
+ alarm 2) .
.
2
Select your choice of alarm mode by adjusting OFF/ ON/ AUTO/ BUZZ to
To improve reception:
FM:
AUTO or BUZZ.
use the antenna built in the power cord. Adjust the position of the
power cord for optimum reception
uses a built-in antenna inside the set. Direct the antenna by adjust-
ing the position of your set
™
The corresponding alarm indicator(s) will light up.
.
AM:
Helpful Hint:
•
.
If you have selected the radio mode, make sure you have adjusted the volume
loud enough to wake you.
•
The buzzer is set at a fixed volume and cannot be adjusted.
Download from Www.Somanuals.com. All Manuals Search And Download.
SWITCHING OFF THE ALARM
MAINTENANCE
There are three ways of switching off the alarm. Unless you cancel the alarm
completely, the 24 hour alarm reset option will be automatically selected after
59 minutes, from the time your alarm time first goes off.
•
If you do not intend to use the set for a long time, withdraw the power plug
from the wall outlet. In addition to this, it is advisable to remove the battery
from the clock radio. This will prevent any danger of leakage and the clock
radio will not be damaged.
Do not expose the set to humidity, rain, sand or excessive heat caused by
heating equipment or direct sunlight.
To clean the set, use a soft, slightly dampened chamois leather. Do not use
any cleaning agents containing alcohol, ammonia, benzene or abrasives as
these may harm the housing.
24 HOUR ALARM RESET
If you want the alarm mode to be stopped immediately but also wish to retain the
same alarm setting for the following day:
•
•
•
Press SET TIME/ALARM OFF during the alarm call.
CANCELING THE ALARM COMPLETELY
To cancel the set alarm time before it goes off, or during the alarm call:
ENVIRONMENTAL INFORMATION
•
Adjust OFF/ON/AUTO/BUZZ to OFF position.
We have reduced packaging to the minimum for easy separation into two materi-
als: paper and cardboard.
Your set consists of materials which can be recycled if disassembled by a special-
ized company. Please observe local regulations on the disposal of packing materi-
als and old equipment.
REPEAT ALARM
This repeats your alarm call at 7-8-minute intervals.
1
2
During the alarm call, press REPEAT ALARM
.
Repeat if desired for up to 59 minutes.
SLEEP
This set has a built-in timer which enables the set to be automatically switched
off during radio playback after a set period of time. This allows you to lie back,
listen and fall asleep. The maximum sleep time is 59 minutes.
Setting SLEEP
1
2
Set OFF/ON/AUTO/BUZZ to OFF position.
Set your sleep time by pressing on the SLEEP button. Keep your finger on the
button and the display will begin to count down from 0:59 to 0:00 minute.
The set complies with the FCC-Rules, Part 15.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
™
To cancel sleep, press SET TIME/ALARM OFF
.
™
To view the remaining sleep time, press SLEEP.
TROUBLESHOOTING
If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or
service center.
WARNING: Under no circumstances should you try to repair the set yourself, as this
will invalidate the warranty. Do not open the set as there is a risk of
electric shock.
Problem
–
•
Possible Cause
Remedy
No sound/power
–
•
Volume not adjusted
Adjust the volume
Occasional crackling sound during FM broadcast
–
•
Weak signal
Adjust the position of the power cord
Continuous crackling/hiss disturbance during AM broadcast
–
•
Electrical interference from TV, computer, fluorescent lamp, etc.
Move set away from other electrical equipment
The alarm does not function
–
•
Alarm time not set and or alarm mode not selected
Set the alarm time and / select alarm mode
–
•
Volume too low for RADIO
Adjust the volume
–
•
Radio alarm not adjusted to radio station
Tune to a radio station
Download from Www.Somanuals.com. All Manuals Search And Download.
MAGNAVOX LIMITED WARRANTY
Ninety (90) Days Free Product Exchange
MAGNAVOX warrants this product against defect in material
WHERE WARRANTY EXCHANGE IS AVAILABLE:
Exchange is available in all countries where Magnavox officially
distributes the product. In countries where Magnavox does not
distribute the product, the local Magnavox organization will
attempt to exchange the product, although there may be a delay
if the appropriate product is not readily available or special cus-
toms processes are implied.
or workmanship, subject to any conditions set forth as follows:
PROOF OF PURCHASE:
You must have proof of the date of purchase to exchange the
product.A sales receipt or other document showing the prod-
uct and the date that you purchased the product as well as the
authorized retailer included, is considered such proof.
FOR EXCHANGE INTHE U.S.A., PUERTO RICO, OR
U.S.VIRGIN ISLANDS…
Contact Magnavox Customer Care Center at:
1-800-705-2000
COVERAGE:
Warranty coverage begins the day you buy the product. For a
period of ninety (90) days from the date of purchase, if the
product is determined to be defective, Magnavox will exchange
the defective product with a new or renewed product, at its
option, at no charge.The replacement product is covered only
for the warranty period of the original product.When the war-
ranty on the original product expires, the warranty on all
replaced products also expires.When it is necessary for you to
ship the product to Magnavox for exchange, you will pay the
shipping cost for shipment to Magnavox. Magnavox will pay the
shipping costs when returning a product to you.
FOR EXCHANGE IN CANADA…
1-800-661-6162 (French Speaking)
1-800-705-2000 (English or Spanish Speaking)
REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS
THE EXCLUSIVE REMEDY FOR THE CONSUMER. MAG-
NAVOX SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR BREACH OF ANY
EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT.
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE
Note:The exchange model supplied will be the most compara-
ble one in Magnavox current inventory. Shipping of your product LAW,ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
to Magnavox implies intent to follow the specified requirements FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT
of the warranty and exchange program. Product received by
Magnavox cannot be returned. Replacement product can only
be sent if all warranty requirements are met. Failure to follow
all requirements can result in delay of exchange process.
IS LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY.
Some states do not allow the exclusions or limitation of inci-
dental or consequential damages, or allow limitations on how
long an implied warranty lasts, so the above limitations or exclu-
sions may not apply to you. In addition, if you enter into a ser-
vice contract agreement with the MAGNAVOX partnership
EXCLUDED FROM WARRANTY COVERAGE
Your warranty does not cover:
•
•
Shipping charges to return defective product.
Labor charges for installation or setup of the product, adjust- within ninety (90) days of the date of sale, the limitation on how
ment of customer controls on the product, and installation
or repair of antenna systems outside of the product.
Product repair and/or part replacement because of improper
installation, connections to improper voltage supply, abuse,
neglect, misuse, accident, unauthorized repair or other cause
not within the control of Magnavox.
A product that requires modification or adaptation to enable
it to operate in any country other than the country for
which it was designed, manufactured, approved and/or autho-
rized, or repair of products damaged by these modifications.
Damage occurring to product during shipping when improp-
erly packaged or cost associated with packaging.
Product lost in shipment and no signature verification of
receipt can be provided.
long an implied warranty lasts does not apply.
•
•
•
•
•
•
A product used for commercial or institutional purposes
(including but not limited to rental purposes).
Product sold AS IS or RENEWED.
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
Magnavox, P.O. Box 671539, Marietta, GA. 30006-0026
(Warranty: 4835 710 27750)
Download from Www.Somanuals.com. All Manuals Search And Download.
|