Memorex Computer Drive 53958662 User Manual

share.  
capture.  
USB Flash Drive  
Quick Start Guide  
Thank you for purchasing a Memorex USB Flash Drive. Your Flash  
Drive is a multi-purpose and universally compatible Portable Storage  
Device.  
GETTING STARTED:  
Step 1 – Check your Operating System (OS):  
• For Windows® Me, Windows® 2000, and Windows® XP  
There is no need to install any drivers! Go straight to Step 2- “Using  
Your Flash Drive.”  
• For Windows® 98SE (internet access required)  
You need to install a USB 2.0 driver for the computer to recognize  
the Flash Drive. See “Windows® 98SE Users” below.  
• For Windows® NT—NT does not support USB. The Flash Drive is  
not supported in this OS.  
• For Windows 98® or older – Windows® operating systems prior to  
Windows® 98SE do not have adequate USB support, and the  
Flash Drive is therefore not supported for use by those operating  
systems.  
• For Apple Macintosh Mac OS 8.6 or higher (8.6 - 9.x USB 1.1 support only)  
There is no need to install any drivers! Go straight to Step 2.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Windows® 98SE Users: (Internet access required @ www.memorex.com)  
Note: Do not insert your USB Flash Drive into your USB port until you have successfully  
completed steps a. through f. below.  
a. Turn on your computer and wait for the Windows desktop to appear.  
b. Close any applications you may have running.  
c. Download the necessary driver by launching your internet browser  
and going to the Memorex website at  
• Select DOWNLOAD SOFTWARE, under General Support and  
Software.  
• Under "Hardware", Choose other USB Flash Drives.  
• Under "Now select your Product" on the right side, select the  
model you have.  
• Select Download File once you have determined the appropriate  
Driver.  
• When the download dialogue box appears, click on SAVE.  
• Choose or create a folder on your computer's desktop in which  
you want to save the downloaded driver. You will install the driver  
from this folder after it has been downloaded.  
• Once the download is complete, click on CLOSE and exit the  
website.  
d. Go to the folder where you saved the zip file. Using the winzip  
program, unzip the file into the same folder. If winzip is not installed,  
been unzipped, double-click on the setup.exe application to begin the  
installation.  
• A Welcome dialogue box will pop up to give you the option of  
installing the drivers. Click on NEXT.  
• A Setup Status screen will appear confirming the installation  
process has begun. Once completed, a "Restarting Windows"  
dialogue box will appear.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Choose "Yes, I want to restart my computer now" and click OK to  
reboot your computer to complete the driver installation process.  
e. Your Memorex USB Flash Drive is now ready to use. When you  
insert the drive into an available USB port on your computer, your  
system will identify the drive, locate the driver software, and complete  
the driver installation process.  
Step 2 – Using Your FlashDrive:  
Your new Memorex USB Flash Drive is ready to use now. Follow the  
simple steps below to begin using your new portable storage device:  
a. Remove the protective snap-on cap and insert your new  
Flash Drive into an available USB port on your computer.  
Note: You may be required to wait a few minutes while your new Flash Drive is configuring  
itself to your computer system. (Click "OK" or "Agree" to any driver prompts should they  
appear).  
b. Restart your computer now to ensure driver installation and  
drive setup.  
c. At the desktop screen double-click on “My Computer.” The  
Flash Drive should appear as a “Removable Disk” icon. The actual  
drive letter assigned to your Flash Drive will vary depending on how  
many other drives are on your system.  
You are ready to begin using your new Memorex USB Flash Drive.  
Congratulations!  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Note: Do not remove the USB Flash Drive while the LED is flashing!  
Interrupting the data flow while the LED is flashing can potentially corrupt existing data  
that is being transferred as well as other data stored on the drive. You may also potentially  
lose access to your drive and your ability to retrieve any files stored on the USB Flash  
Drive. Once the LED returns to an unblinking state, the data transfer operation is  
complete; and it is safe to remove your drive.  
Using the Write Protection Switch  
Your USB Flash Drive is equipped with an external Write-Protection  
switch. The switch is located on the side of the drive. Sliding the write  
protection switch to the left or towards the “lock” icon position  
,
prevents any data writing or accidental erasure of critical files. Sliding  
the switch back to the right towards the unlock symbol  
to be written to or from the USB Flash Drive normally.  
allows data  
TECHNICAL ASSISTANCE  
Should you require assistance or have questions regarding your  
Memorex USB Flash Drive, you can find answers on our website at  
toll free at 877 – Is it live (877-474-8548)  
Important Note: Although your USB Flash Drive is compatible with either a USB 2.0 or  
USB 1.1 port, performance is maximized when using a USB 2.0 port. Transfer speeds will  
vary and differ significantly when connected to USB 1.1 port. Actual read and write speeds  
may vary depending on file types, OS, etc.  
© 2006 Memorex Products, Inc.  
Download from Www.SoCmeraritnosu,aClAs9.c07o0m3 •.wAwwll.mMemaonreuxa.closmSearch And Download.  
53958662  

KWC Indoor Furnishings K11VB72700A22 User Manual
KWC Plumbing Product K11H373 User Manual
Kyocera Cell Phone KX16 User Manual
LG Electronics Cell Phone 002KPYR0001018 User Manual
Lindy Computer Drive 20694 User Manual
Lucent Technologies Network Router Cajun M770 User Manual
Mabe Canada Microwave Oven JVM1620 User Manual
Makita Lawn Mower BLM430 User Manual
Metrologic Instruments Barcode Reader MLPN 2168 User Manual
MicroBoards Technology DVD Recorder 820 00150 01 User Manual