Magnavox CRT Television 25i User Manual

Color  
Television  
Your Televisions  
Directions for Use  
Read this manual first!  
Congratulations on purchasing this Philips product.  
Weve included everything you need to get started.  
If you have any problems, Philips Representatives can  
help you get the most from your new product by explaining:  
• Hookups,  
First Time Setup, and  
Feature Operation.  
Do not attempt to return this product to the store.  
For fast help, call us first!  
1-800-531-0039  
Thank you for making Philips a part of your home!  
3121 235 20081  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
Read before operating equipment  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with a dry cloth.  
16. Damage Requiring Service - The appliance should be  
serviced by qualified service personnel when:  
A. The power supply cord or the plug has been damaged;  
or  
B. Objects have fallen, or liquid has been spilled into the  
appliance; or  
C. The appliance has been exposed to rain; or  
D. The appliance does not appear to operate normally or  
exhibits a marked change in performance; or  
E. The appliance has been dropped, or the enclosure  
damaged.  
7. Do not block any of the ventilation openings. Install in  
accordance with the manufacturers instructions.  
8. Do not install near any heat sources such as radiators, heat  
registers, stoves, or other apparatus (including amplifiers)  
that produce heat.  
9. Do not defeat the safety purpose of the polarized or ground-  
ing-type plug. A polarized plug has two blades with one  
wider than the other. A grounding type plug has two blades  
and third grounding prong. The wide blade or third prong  
are provided for your safety. When the provided plug does  
not fit into your outlet, consult an electrician for replacement  
of the obsolete outlet.  
17. Tilt/Stability - All televisions must comply with recommend-  
ed international global safety standards for tilt and stability  
properties of its cabinet design.  
• Do not compromise these design standards by applying  
excessive pull force to the front, or top, of the cabinet which  
could ultimately overturn the product.  
• Also, do not endanger yourself, or children, by placing  
electronic equipment/toys on the top of the cabinet. Such  
items could unsuspectingly fall from the top of the set and  
cause product damage and/or personal injury.  
10. Protect the power cord from being walked on or pinched  
particularly at plugs, convenience receptacles, and the point  
where they exit from the apparatus.  
18. Wall or Ceiling Mounting - The appliance should be  
mounted to a wall or ceiling only as recommended by the  
manufacturer.  
11. Only use attachments/accessories specified by the manu-  
facturer.  
19. Power Lines - An outdoor antenna should be located away  
12.  
Use only with a cart, stand, tripod, bracket, or table  
specified by the manufacturer, or sold with the app-  
aratus. When a cart is used, use caution when  
moving the cart/apparatus combination to avoid  
from power lines.  
20. Outdoor Antenna Grounding - If an outside antenna is  
connected to the receiver, be sure the antenna system is  
grounded so as to provide some protection against voltage  
surges and built up static charges.  
injury from tip-over.  
13. Unplug this apparatus during lightning storms or when  
Section 810 of the National Electric Code, ANSI/NFPA No.  
70-1984, provides information with respect to proper  
grounding of the mats and supporting structure grounding of  
the lead-in wire to an antenna discharge unit, size of  
grounding connectors, location of antenna-discharge unit,  
connection to grounding electrodes and requirements for  
the grounding electrode. See Figure below.  
unused for long periods of time.  
14. Refer all servicing to qualified service personnel. Servicing  
is required when the apparatus has been damaged in any  
way, such as power-supply cord or plug is damaged, liquid  
has been spilled or objects have fallen into apparatus, the  
apparatus has been exposed to rain or moisture, does not  
operate normally, or has been dropped.  
15. This product may contain lead and mercury. Disposal of  
these materials may be regulated due to environmental con-  
siderations. For disposal or recycling information, please  
contact your local authorities or the Electronic Industries  
21 Object and Liquid Entry - Care should be taken so that  
objects do not fall and liquids are not spilled into the enclo-  
sure through openings.  
Note to the CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides  
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close  
to the point of cable entry as practical.  
Example of Antenna Grounding  
as per NEC - National Electric Code  
GROUND CLAMP  
ANTENNA LEAD IN WIRE  
ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)  
GROUNDING CONDUCTORS (NEC SECTION 810-21)  
GROUND CLAMPS  
POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)  
ELECTRIC SERVICE EQUIPMENT  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
Here are a few of the special features built into this new  
Color Television:  
Introduction  
Welcome/Registration of Your TV . . . . . . . . . . . . . . . . . . .2  
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4  
SmartLock™ feature allows you to block the viewing of  
certain channels where you might not want your children  
viewing inappropriate material.  
Getting Started  
Basic Cable TV Connection . . . . . . . . . . . . . . . . . .5  
Basic Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . .6  
Basic VCR to Television Connection . . . . . . . . . . . . . . . . .7  
Basic Television Operation . . . . . . . . . . . . . . . . . . . . . . . .8  
Basic Remote Operation . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Description of Remote Control Buttons . . . . . . . . . . . . . . .9  
Infrared Remote Control works your TV set, and allows  
you to program certain features with the press of one button.  
Standard broadcast (VHF/UHF) or Cable TV (CATV)  
channel capability.  
On-Screen Menu  
Closed Captioning allows the viewer to read TV program  
dialogue or voice conversations as on-screen text.  
Install Features  
How to Use the Language Control . . . . . . . . . . . . . . . . . .10  
How to Use the Tuner Mode Control . . . . . . . . . . . . . . . .11  
How to Auto Program TV Channels . . . . . . . . . . . . . . . . .12  
How to Add or Delete Channels . . . . . . . . . . . . . . . . . . . .13  
Automatic Programming of Channels for quick and easy  
selection of favorite stations available in your area.  
General Features  
On-screen Features (in either English or Spanish) show  
How to Use the Picture Adjustment Controls . . . . . . . . . .14  
How to Set the TV for Closed Captioning . . . . . . . . . . . .15  
How to Set the Sleeptimer Control . . . . . . . . . . . . . . . . . .16  
Using the Alternate Channel Control . . . . . . . . . . . . . . . .17  
Understanding the SmartLock Controls . . . . . . . . . . . . . .18  
Setting Up the SmartLock Access Code . . . . . . . . . . . . . .19  
How to Block Channels or Block All Channels . . . . . . . .20  
How to Clear All Blocked Channels . . . . . . . . . . . . . . . . .21  
Blocking Programming Based on Movie Ratings . . . . . . .22  
Blocking Programming Based on TV Ratings . . . . . . . . .23  
Other Blocking Options (Blocking, Unrated, No Rating) .24  
helpful messages for setting of TV controls.  
Sleeptimer automatically turns the TV OFF at preset times.  
NOTE: This owner's manual may be used with sever-  
al different television models. It is possible that some  
features (and drawings) discussed in this manual may  
vary slightly from those found with your television sys-  
tem. Normally what is found in this manual will match  
the features found on your new television. If yours  
should look slightly different, it does not require you  
contacting your dealer or requesting service.  
General Information  
Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . . .25  
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25  
Factory Service Location . . . . . . . . . . . . . . . . . . . . . .26-27  
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28  
Magnavox, Auto Lock™  
are all registered trademarks of Philips Consumer Electronics Company.  
Copyright © 2001 All rights reserved.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOOKING UP YOUR TV (BASIC CABLE TV CONNECTIONS)  
our Cable TV input into your  
Yhome may be a single (75 ohm)  
cable, or a Converter Box installa-  
tion. In either case the connection to  
the TV is very easy. Just put the  
threaded end of the cable signal to  
the TV's antenna plug and screw it  
down finger tight.  
If your Cable TV signal is a single  
round cable (75 ohm) then you're  
ready to connect to the TV.  
If you have a Cable Converter Box:  
Connect the Cable TV signal to the  
Cable Signal IN(put) plug on the  
75  
Converter.  
Connect the Cable TV cable to the  
75plug on the TV.  
If you have a Cable Converter Box:  
Connect the OUT(put) plug from the  
Converter to the 75plug on the TV.  
SMART HELP  
2
Remember: Set the TV for the  
type signal you've just connected  
(see the “Tuner Mode” section on page  
11 of this manual).  
Cable TV Company  
75  
Cable TV Signal Input  
To select only the channel numbers on  
your Cable system see “Auto Program"  
(page 12). If you use a Cable Converter  
box, set the TV to the same channel as  
the converter's CH 3/4 switch (on the rear  
of the converter).  
Back of TV  
OR  
O
U
T
IN  
Round Cable  
75Ohm  
1
Cable TV Converter  
Box Connection  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOOKING UP YOUR TV (BASIC ANTENNA TV CONNECTIONS)  
combination antenna receives  
Anormal broadcast channels  
Note: For homes with separate UHF and VHF antennas  
you will need an optional combiner to connect to the TV.  
(VHF 2-13 and UHF 14-69). Your  
connection is easy since there is  
only one 75(ohm) antenna plug  
on the back of your TV - and thats  
U/V  
Combiner  
where the antenna goes.  
If your antenna has a round cable  
(75 ohm) on the end, then you're ready  
Back of TV  
to connect it to the TV.  
If your antenna has flat twin-lead wire  
(300 ohm), you first need to attach the  
75-300 Ohm Adapter  
antenna wires to the screws on a 300 to  
75 ohm adapter.  
Push the round end of the adapter  
(or antenna) onto the 75plug on the  
rear of the TV. If the round end of the  
antenna wire is threaded, screw it down  
finger tight.  
SMART HELP  
Remember: Be sure to set the  
TV for the type signal you've  
75  
connected (see the “Tuner Mode” sec-  
tion on page 11 of this manual.)  
To set the TV to select only the channel  
numbers in your area see how to  
“Program" or "Add" channels in the  
TV’s memory on page 12 (Auto  
Program section).  
To order any optional accessory contact  
your dealer or the Philips Parts Center  
at 1-800-851-8885.  
2
300 to 75Ω  
Adapter  
1
75  
Combination VHF/UHF  
Antenna  
(Outdoor or Indoor)  
Back of TV  
Twin Lead  
Wire  
OR  
Round Cable  
75Ω  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOOKING UP YOUR TV (BASIC TV TO VCR CONNECTIONS)  
he basic Antenna, or Cable TV,  
Tto VCR to TV connection is  
shown to the right. For more infor-  
mation on other hookups (possible  
when Cable Converter/Descrambler  
boxes are included) refer to your  
accessory VCR and Cable  
Converter Owner's Manual for  
details.  
Connect your Antenna or Cable  
TV signal to the IN FROM  
ANT(enna) plug on the VCR.  
Connect the OUT TO TV plug on  
75  
the VCR to the 75plug on the TV  
(connecting cable supplied with the  
VCR.)  
Outdoor  
VHF/UHF  
Antenna  
300 to 75Ω  
Ohm Adapter  
1
2
75 ⍀  
OR  
OUT TO TV  
IN FROM ANT.  
Back of TV  
Cable TV signal  
Round Cable  
75Supplied with VCR  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC TV/REMOTE OPERATIONS  
TELEVISION  
Press the POWER button to turn  
the TV ON.  
6
Note: You can also press any button on  
the front of the TV to turn the TV ON.  
Press the VOLUME + button to  
increase the sound level, or the VOL-  
UME – button to lower the sound  
level.  
ME  
N
U
V
O
LUME  
+
C
H
A
N
N
E
L
POWER  
Pressing both Volume buttons at the  
same time will display the on-screen  
menu. Once in the menu, use these but-  
ton to make adjustments or selections.  
Remote Sensor Window  
Press the CHANNEL UP or  
DOWN button to select TV chan-  
nels.  
MENU  
VOLUME +  
CHANNEL  
POWER  
REMOTE  
Point the remote control toward the  
remote sensor window on the TV when  
operating the TV with the remote.  
1
3
2
R
E
W
O
P
3
2
4
BATTERY INSTALLATION  
+
1
H
C
6
5
4
9
8
+
L
7
O
V
o load the supplied batteries into  
C
C
0
H
C
L
/
A
O
V
Tthe remote:  
S
U
T
A
T
S
U
N
E
M
T
I
X
E
E
T
U
M
1. Remove the battery compartment  
lid on the back of the remote.  
P
E
E
L
S
2. Place the batteries (2-AA) in the  
remote. Be sure the (+) and (-) ends of  
the batteries line up correctly (inside of  
case is marked).  
Battery Lid  
3. Reattach the battery lid.  
SMART HELP  
Remember, the tuned channel  
number will always briefly  
appear when the TV is first turned ON  
(and with channel changes).  
Battery  
Compartment  
2 “AA” Batteries  
You can also press the STATUS/EXIT  
button (on the remote) to see what  
channel the TV is ON.  
Bottom of Remote Shown  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
DESCRIPTION OF REMOTE CONTROL BUTTONS  
Power Button  
Press to turn the TV ON and OFF.  
Number Buttons  
1
4
POWER  
CH+  
2
5
8
0
3
6
Press the number buttons to select TV channels. For single digit  
entries, press the number of the channel you desire. The TV will  
pause for a few seconds, then change to the selected channel.  
Channel (+), (–) Buttons  
Press to change the tuned channel.  
CH–  
7
9
Volume (+), (–) Buttons  
Press to adjust the TV sound level.  
CC  
A/CH  
VOL+  
VOL–  
CC Button  
Press to select Closed Caption options within the menu.  
STATUS  
EXIT  
A/CH Button  
Press to toggle between the currently viewed channel and the pre-  
viously viewed channel.  
MENU  
Status/Exit Button  
Press to see the current channel number and the Clock (if set) on  
the TV screen. Also press to clear the TV screen after control  
adjustments.  
SLEEP  
MUTE  
Cursor Buttons  
Use these button to select and adjust the TV's onscreen menu.  
Menu Button  
Press for the on-screen menu to appear. Pressing the Menu but-  
ton after menu selections are made will cause the menu to dis-  
appear from the screen.  
Sleep Button  
Press to set the TV to automatically turn itself OFF.  
Mute Button  
Press to turn the sound OFF on the TV. Press again to return  
the sound to its previous level.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE LANGUAGE CONTROL  
or our Spanish speaking TV owners  
Fan on-screen LANGUAGE option is  
present. With the LANGUAGE control  
you can set the TVs on-screen menu to  
be shown in either English or Spanish.  
Press the MENU button on the  
remote to show the on-screen menu.  
Press the CURSOR UP or  
DOWN buttons to scroll through  
the on-screen menu until the INSTALL  
control appears on the screen.  
Brightness  
+
Press the CURSOR RIGHT ᮣ  
button to display the LANGUAGE  
control.  
Install  
1
POWER  
CH+  
2
3
6
Press the CURSOR RIGHT ᮣ  
button repeatedly to select ENGLISH  
or ESPANOL (Spanish).  
4
7
5
8
0
CH–  
9
A/CH  
CC  
2
5
When finished, press the STATUS  
/EXIT button to remove the menu  
from the TV screen.  
4
VOL–  
STATUS  
EXIT  
3
Language  
English  
MENU  
MUTE  
1
OR  
2
SMART HELP  
Remember: The Language  
control only makes the TV on-  
screen MENU items appear in English  
or Spanish text.  
Idioma  
Español  
It does not change the other on-screen  
text features such as Closed Caption  
(CC) TV shows.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO USE THE TUNER MODE CONTROL  
he TUNER MODE control allows  
Tyou to change the TVs signal input  
to either ANTENNA, CABLE or AUTO  
mode. Its important for the TV to know  
what type of signal to look for (either  
Cable TV signal or a normal Antenna  
signal). In the AUTO mode, when the  
AUTO PROGRAM feature is activated,  
the TV will automatically choose the  
correct mode.  
Press the MENU button on the  
remote to show the on-screen menu.  
Brightness  
+
Press the CURSOR UP or  
DOWN buttons to scroll through  
the on-screen menu until the INSTALL  
control appears on the screen.  
Install  
1
POWER  
CH+  
2
3
6
4
7
5
8
0
Press the CURSOR RIGHT ᮣ  
button to display the LANGUAGE  
control.  
CH–  
9
4
A/CH  
CC  
2
6
5
Press CURSOR UP or DOWN  
buttons to scroll the Install features  
until the TUNER MODE control  
appears on the screen.  
VOL–  
STATUS  
EXIT  
3
Language  
English  
MENU  
MUTE  
1
Press the CURSOR RIGHT ᮣ  
button to select either ANTENNA,  
CABLE, or AUTO mode.  
2
4
When finished, press the STATUS  
/EXIT button to remove the on-screen  
menu from the TV screen.  
Tuner Mode  
Antenna  
Tuner Mode  
Tuner Mode  
Cable  
SMART HELP  
When CABLE is selected,  
channels 1-125 are available.  
When ANTENNA is selected, channels  
2-69 are available.  
Auto  
When AUTO is selected, the TV will  
automatically set itself to the correct  
mode (based on the type of signal it  
detects when the AUTO PROGRAM  
feature is activated).  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO AUTOMATICALLY PROGRAM TV CHANNELS  
our TV can automatically set itself  
Yfor local area (or Cable TV) chan-  
nels. This makes it easy for you to  
select only the TV stations in your area  
when the CHANNEL (+), (–) buttons  
are pressed.  
Note: Make sure the antenna or cable  
signal connection has been completed  
before AUTO PROGRAM is activated.  
Press the MENU button on the  
remote to show the on-screen menu.  
Brightness  
+
Press the CURSOR UP or  
DOWN buttons to scroll through  
the on-screen menu until the INSTALL  
control appears on the screen.  
Install  
1
POWER  
CH+  
2
3
6
Press the CURSOR RIGHT ᮣ  
button. “Language” control will appear  
on the screen.  
4
7
5
8
0
CH–  
9
4
Press CURSOR UP or DOWN  
buttons to scroll the Install features  
until the AUTO PROGRAM control  
appears on the screen. Whatever chan-  
nel you are tuned to at the time will  
appear within the Auto Program con-  
trol.  
A/CH  
CC  
2
6
5
VOL–  
STATUS  
EXIT  
3
Language  
English  
MENU  
MUTE  
1
Press the CURSOR RIGHT ᮣ  
button to start the Auto Program scan-  
ning of channels. Auto Programming  
will store all available channels in the  
TV’s memory, then tune to the lowest  
available channel when done.  
Tuner Mode  
2
Antenna  
4
When finished, press the STATUS  
/EXIT button to remove the menu  
from the TV screen.  
Auto Program  
3
SMART HELP  
Try it out. Press the CHAN-  
NEL (+), (–) buttons and see  
which channels have been added to the  
TV’s memory.  
If you want to delete any unwanted chan-  
nels from the TV’s memory, refer to the  
section on adding and removing channels  
(Channel Edit) on the next page.  
Auto Program  
7
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO ADD OR DELETE TV CHANNELS  
hannel Edit makes it easy for you to  
CADD or DELETE channels from  
the list of channels stored in the TVs  
memory.  
Press the MENU button on the  
remote to show the on-screen menu.  
Press the CURSOR UP or  
DOWN buttons to scroll through  
the on-screen menu until the INSTALL  
control appears on the screen.  
Brightness  
+
Install  
Press the CURSOR RIGHT ᮣ  
button to display the INSTALL menu  
features. “Language” control will  
appear on the screen.  
1
POWER  
CH+  
2
3
6
4
7
5
8
0
Press the CURSOR UP or  
DOWN buttons to scroll the Install  
features until the CHANNEL EDIT  
control appears on the screen.  
Language  
CH–  
9
English  
4
A/CH  
CC  
2
9
6
5
8
VOL–  
STATUS  
EXIT  
3
Press the CURSOR RIGHT ᮣ  
button to display the CHANNEL  
EDIT options. “Program No.” will  
appear on the screen.  
MENU  
8
Tuner Mode  
6
Antenna  
SLEE
MUTE  
1
With the PROGRAM NO. option  
displayed press the CUSOR RIGHT  
or LEFT button to select the  
channel you wish to add (Skipped  
OFF), or delete (Skipped ON) from the  
TV’s memory.  
2
4
7
Auto Program  
3
Press the CURSOR DOWN but-  
ton to display the SKIPPED On/Off  
control.  
Press the CURSOR RIGHT ᮣ  
button to select OFF or the CUR-  
SOR LEFT button to select ON.  
If ON is selected the channel is  
skipped when scrolling channels with  
the CH + or – buttons. If OFF is select-  
ed the channel is not skipped when  
scrolling channels with the CH + or –  
buttons.  
Channel Edit  
When finished, press the STATUS  
/EXIT button to remove the menu  
from the TV’s screen.  
Skipped  
On  
Program No.  
7
Off  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO USE THE PICTURE ADJUSTMENT CONTROLS  
o adjust your TV picture controls,  
Tselect a channel and follow the  
steps shown below:  
Press the MENU button on the  
remote to display the on-screen menu.  
Press the CURSOR RIGHT or  
the CURSOR LEFT buttons to  
increase or decrease the Brightness con-  
trol values. The changes will be seen on  
the TV picture.  
Brightness  
Press the CURSOR UP or  
DOWN buttons to choose one of  
the other Picture Adjustment controls  
(Color, Picture, Sharpness, or Tint).  
+
Color  
+
+
+
+
Press the CURSOR RIGHT or  
the CURSOR LEFT buttons to  
adjust the select control. Repeat with  
other controls until the desired picture  
settings are obtained.  
1
POWER  
CH+  
2
3
6
4
7
5
8
0
CH–  
9
A/CH  
CC  
3
5
When finished, press the STATUS  
/EXIT button to remove the menu  
from the TV’s screen.  
4
VOL–  
STATUS  
EXIT  
2
Picture  
Sharpness  
Tint  
4
MENU  
2
SLEEP  
MUTE  
1
3
SMART HELP  
BRIGHTNESS Press the or  
buttons until darkest parts of the  
picture are as bright as you prefer.  
COLOR Press the or buttons to add  
or decrease color.  
PICTURE Press the or buttons until  
lightest parts of the picture show good  
detail.  
SHARPNESS Press the or buttons  
to improve detail in the picture.  
TINT Press the or buttons to obtain  
natural skin tones.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Let'  
s
Loo  
k
Insi  
de!  
HOW TO USE THE CLOSED CAPTION CONTROL  
losed Captioning (CC) allows you  
Cto read the voice content of televi-  
sion programs on the TV screen.  
Designed to help the hearing impaired,  
this feature uses onscreen “text boxes”  
to show dialogue and conversations  
while the TV program is in progress.  
Press the CC button on the remote  
to display the on-screen Closed Caption  
options.  
CC Off  
Press the CC button repeatedly to  
toggle through the Closed Caption set-  
tings. Choose CC Off, CC1, CC2 or  
CC Mute. Dialogue (and descriptions)  
for the action on the captioned TV pro-  
gram will appear on-screen.  
CC1  
1
4
POWER  
CH+  
2
5
8
0
3
6
NOTE: If CC Mute is selected, whenev-  
er the TV’s sound is muted the CC1  
Closed Caption option will be activated.  
CH–  
7
9
A/CH  
CC  
VOL+  
3
When finished, press the STATUS  
/EXIT button to remove the menu from  
the TV’s screen.  
STATUS  
EXIT  
CC2  
1
MENU  
2
SLEEP  
MUTE  
SMART HELP  
Not all TV programs and  
product commercials are made  
CC Mute  
with Closed Caption (CC) information  
included. Neither are all Closed Caption  
modes (CC1, or CC2) necessarily being  
used during the transmission of a closed  
caption program. Refer to your area's  
TV program listings for the stations and  
times of Closed Caption shows.  
CAPTION mode  
Example Display  
NOTE: The CC MUTE option  
turns the Closed Caption mode  
“ON” whenever the MUTE but-  
ton on the remote is pressed.  
This activates the CC1 option.  
JOHN: Why did they move the  
meeting up to this week?  
MARSHA: I don't know, but they  
are pushing to close the deal.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO SET UP THE SLEEPTIMER CONTROL  
ave you ever fallen asleep in front  
Hof the TV only to have it wake you  
up at two in the morning with a test  
pattern screeching in your ears? Well,  
your TV can save you all that trouble  
by automatically turning itself off.  
Press the SLEEP button on the  
remote control and the SLEEP timer  
display will appear on the screen.  
Press the SLEEP button repeatedly  
to pick the amount of time (15, 30, 45,  
60, 90, 120, 180 or 240 minutes) before  
the TV will turn itself off.  
Sleep Off  
15  
30  
An on-screen count down will appear  
during the last minute before the TV  
shuts itself off.  
1
4
POWER  
CH+  
2
5
8
0
3
6
CH–  
7
9
A/CH  
CC  
VOL+  
VOL–  
45  
STATUS  
EXIT  
2
MENU  
SMART HELP  
1
SLEEP  
MUTE  
The on-screen menu will time  
out and disappear from the screen  
when you finish. You can also press the  
STATUS/EXIT button to clear the menu  
from the screen.  
60  
90  
120  
180  
During the last minute of a  
SLEEP timer setting, an on-  
screen count down will be dis-  
played. Pressing any button  
during the last minute will  
cancel the SLEEP timer.  
During the last 10 seconds of  
a SLEEP timer setting, an  
onscreen display will read  
GOOD BYE.  
240  
Good Bye  
9 Sec  
45 Sec  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE ALTERNATE CHANNEL CONTROL  
our remote has an A/CH (Alternate  
YChannel) button. Pressing this but-  
ton will toggle between the Current and  
one previously selected channel.  
Press the CH + or CH – button (or  
the Numbered buttons) to select a chan-  
nel to view. Then using the same but-  
tons select a second channel to view.  
12  
Press the A/CH button repeatedly  
24  
to toggle between the two channels.  
SMART HELP  
This is a great feature to toggle  
between two programs that your  
interested in watching at the same time.  
1
POWER  
CH+  
2
5
8
0
3
6
1
1
Remember, the A/CH will only toggle  
the current channel and the last previ-  
souly viewed channel.  
CH–  
7
9
12  
A/CH  
CC  
VOL+  
VOL–  
STATUS  
EXIT  
2
MENU  
SLEEP  
MUTE  
24  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UNDERSTANDING THE SMARTLOCK CONTROLS  
he SmartLock feature is an  
Tintegrated circuit that receives  
and processes data sent by broad-  
casters, or other program  
TV-Y  
TV-Y7  
TV-G  
TV-PG  
TV-14  
TV-MA  
G
PG  
PG-13  
R
NC-17  
X
providers, that contain program  
content advisories. When pro-  
grammed by the viewer, a TV with  
SmartLock can respond to the con-  
tent advisories and block program  
content that may be found objec-  
tionable (such as offensive lan-  
guage, violence, sexual situations,  
etc.). This is a great feature to cen-  
sor the type of viewing children  
may watch.  
TV Rating  
Movie Rating  
Over the next few pages you’ll  
learn how to block channels and  
certain rated programming. Below  
is a brief explanation of some terms  
and ratings you will find in the  
SmartLock feature.  
MOVIE RATINGS  
TV PARENTAL GUIDELINES  
(MOTION PICTURE ASSOCIATION OF AMERICA)  
(TV BROADCASTERS)  
G: General Audience - All ages admitted.  
Most parents would find this program suit-  
able for all ages. This type of programming  
contains little or no violence, no strong lan-  
guage, and little or no sexual dialogue or  
situations.  
TV-Y - (All children -- This program is  
TV  
designed to be appropriate for all chil-  
Y dren.) Designed for a very young audi-  
ence, including children ages 2-6. This type of  
programming is not expected to frighten  
younger children.  
SmartLock offers various  
BLOCKING OPTION controls  
from which to choose:  
PG: Parental Guidance Suggested - This  
programming contains material that parents  
may find unsuitable for younger children. It  
may contain one or more of the following:  
moderate violence, some sexual situations,  
infrequent coarse language, or some sugges-  
tive dialogue.  
TV-Y7 - (Directed to Older Children -  
TV  
- This program is designed for children  
Y7 age 7 and above.) It may be more  
Access Code: An Access Code  
must be set to prevent children  
from unblocking questionable or  
censored programming set by their  
parents.  
appropriate for children who have acquired the  
development skills needed to distinguish  
between make-believe and reality. This pro-  
gramming may include mild fantasy and comic  
violence (FV).  
PG-13: Parents Strongly Cautioned - This  
programming contains material that parents  
may find unsuitable for children under the  
age of 13. It contains one or more of the fol-  
lowing: violence, sexual situations, coarse  
language, or suggestive dialogue.  
Channel Block: After an access  
code has been programmed, you  
can block up to 5 individual chan-  
nels.  
TV-G - (General Audience -- Most par-  
TV  
ents would find this program suitable  
Gfor all ages.) This type of programming  
contains little or no violence, no strong lan-  
guage, and little or no sexual dialogue or situa-  
tions.  
Clear Blocked: Allows you clear  
all channels being blocked from  
your viewing set with the Channel  
Block Control.  
R: Restricted -This is programming is specif-  
ically designed for adults. Anyone under the  
age of 17 should only view this program-  
ming with an accompanying parent or adult  
guardian. It contains one or more of the fol-  
lowing: intense violence, intense sexual situ-  
ations, strong coarse language, or intensely  
suggestive dialogue.  
TV-PG - (Parental Guidance  
Suggested -- This program contains  
material that parents may find unsuit-  
TV  
PG  
able for younger children.) This type of pro-  
gramming contains one or more of the follow-  
ing: moderate violence (V), some sexual situa-  
tions (S), infrequent coarse language (L), or  
some suggestive dialogue (D).  
Movie Ratings: Certain blocking  
options exist which will block pro-  
gramming based on ratings pat-  
terned by the Motion Pictures  
Association of America.  
NC-17: No one under the age of 17 will be  
admitted. - This type of programming should  
be viewed by adults only. It contains graphic  
violence, explicit sex, or crude indecent lan-  
guage.  
TV-14 - (Parents Strongly Cautioned -  
TV  
- This program contains some material  
TV Ratings: Just like the Movie  
Ratings, programs can be blocked  
from viewing using standard TV  
ratings set by TV broadcasters.  
14 that many parents would find unsuitable  
for children under 14 years of age.) This type  
of programming contains one or more of the  
following: intense violence (V), intense sexual  
situations (S), strong coarse language (L), or  
intensely suggestive dialogue (D).  
X: Adults Only - This type of programming  
contains one or more of the following: very  
graphic violence, very graphic and explicit or  
indecent sexual acts, very coarse and intense-  
ly suggestive language.  
To learn more about the Motion  
Picture Association of America  
Ratings and the TV Broadcasters  
Television Ratings, refer to the defi-  
nitions listed on the columns to the  
right.  
TV-MA - (Mature Audience Only --  
This program is specifically designed to  
be viewed by adults and therefore may  
TV  
MA  
be unsuitable for children under 17.) This type  
of programming contains one or more of the  
following: graphic violence (V), explicit sexual  
situations (S), or crude indecent language (L).  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTING UP THE SMARTLOCK ACCESS CODE  
ver the next few pages you’ll learn  
Ohow to block channels and get a  
better understanding of the rating terms  
for certain programming.  
First, lets start by learning how to set a  
personal access code:  
Brightness  
+
Press the MENU button on the  
SmartLock  
remote to display the on-screen menu.  
5
4
Press the CURSOR UP or  
DOWN button until the  
SmartLock control appears on the  
screen.  
1
4
POWER  
2
5
8
0
6
CH+  
CH–  
7
9
A/CH  
CC  
2
Press the CURSOR RIGHT ᮣ  
button to display the SmartLock  
Access Code control.  
VOL–  
STATUS  
EXIT  
3
SmartLock  
Access Code  
– – – –  
MENU  
MUTE  
1
Using the NUMBERED buttons,  
enter 0, 7, 1, 1. “XXXX” appears on  
the Access Code screen as you press the  
numbered buttons.  
2
6
“INCORRECT” will appear on the  
screen, and you will need to enter 0, 7,  
1, 1 again.  
SmartLock  
Access Code  
XX– –  
The screen will ask you to enter a  
New Code.” Enter a “new” 4 digit  
code using the NUMBERED buttons.  
The screen will then ask you to CON-  
FIRM the code you just entered. Enter  
your new code again. “XXXX” will  
appear when you enter your new code  
NOTE: The 0,7,1,1 access code shown  
on this page is the default code or a  
way to reset the code when the current  
access code is not known.  
SmartLock  
Incorrect  
XXXX  
Access Code  
Press the CURSOR DOWN ▼  
button to display the first SmartLock  
menu option “Movie Rating.”  
Proceed to the next page to learn  
more...  
SmartLock  
Incorrect  
XX– –  
SmartLock  
New Code  
SmartLock  
New Code  
Access Code  
– – – –  
XXX–  
SMART HELP  
Parents - it isn’t possible for  
your child to unblock a channel  
without knowing your access code or  
changing it to a new one. If your code  
changes, and you didn’t change it, then  
you know it’s been altered by someone  
else and blocked channels have been  
viewed.  
SmartLock  
Confirmed  
XXXX  
SmartLock  
SmartLock  
Confirm Code  
Confirm Code  
– – – –  
Confirm Code  
XXX –  
The SmartLock  
Access Code also  
can be changed  
anytime using the  
Setup Code feature  
Movie Rating  
Setup Code  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO BLOCK CHANNELS OR BLOCK ALL CHANNELS  
fter your personal access code has  
Abeen set (see previous page), you  
are now ready to select the channels  
you want to block out or censor.  
Press the NUMBERED (or CH +,  
–) buttons to tune the channel you  
wish to block or censor.  
Brightness  
+
Press the MENU button on the  
remote to show the on-screen menu.  
SmartLock  
5
Press the CURSOR UP button  
and the SmartLock control will appear  
on the screen.  
1
1
POWER  
2
6
4
7
CH+  
5
8
0
8
CH–  
9
Press the CURSOR RIGHT ᮣ  
button to display the SmartLock  
Access Code control.  
SmartLock  
6
Access Code  
– – – –  
A/CH  
CC  
3
7
7
VOL–  
STATUS  
X
4
MENU  
Enter the correct access code  
number. XXXX” shows on the  
Access Code display as you press the  
NUMBERED buttons. SmartLock  
menu options will be displayed starting  
with “Setup Code”.  
MUTE  
2
SmartLock  
Access Code  
XXXX  
6
8
Setup Code  
Press the CURSOR UP or  
DOWN buttons until the Blocking  
control appears on the screen.  
Press the CURSOR RIGHT or  
LEFT button to turn blocking ON  
or OFF for that channel. When ON is  
selected the channel will be blocked.  
Repeat for other channels you would  
like to block.  
Movie Rating  
TV Rating  
Blocking  
On  
Off  
Or, press the CURSOR UP or  
DOWN buttons to select the Block  
All control. When ON is selected, ALL  
currently available channels will be  
blocked from viewing.  
Block Channel  
On  
Unrated  
On  
No Rating  
On  
Off  
Off  
Off  
SMART HELP  
Channel 9  
Blocked By SmartLock  
Channel Blocking  
If you tune to a blocked chan-  
nel and enter your Access Code  
Access Code  
– – – –  
to view the channel, ALL blocked chan-  
nels will be viewable until the TV has  
been turned off. When the TV is pow-  
ered back ON, the previously blocked  
channels will be blocked again.  
Block All  
On  
Clear All  
On  
Off  
Off  
Enter your Access Code to  
view a tuned channel that is  
blocked with Block Channel.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO CLEAR ALL BLOCKED CHANNELS  
fter you’ve blocked several chan-  
Anels there may come a time when  
you want to unblock all blocked chan-  
nels. The following steps discuss that  
process.  
Press the MENU button on the  
remote to show the on-screen menu.  
Brightness  
+
Press the CURSOR UP button  
and the SmartLock control will appear  
on the screen.  
SmartLock  
7
4
Press the CURSOR RIGHT ᮣ  
button to display the SmartLock  
Access Code control.  
1
4
POWER  
2
5
8
0
6
CH+  
CH–  
7
9
SmartLock  
5
Access Code  
– – – –  
Enter the correct access code  
number. XXXX” shows on the  
Access Code display as you press the  
NUMBERED buttons. SmartLock  
menu options will be displayed starting  
with “Setup Code”.  
A/CH  
CC  
2
6
6
VOL–  
STATUS  
XT  
3
MENU  
MUTE  
1
SmartLock  
Access Code  
XXXX  
5
Press the CURSOR UP or  
DOWN buttons until the Clear All  
control appears on the screen. Clear?  
will appear at the bottom right of the  
control.  
Setup Code  
Press the CURSOR LEFT or  
CURSOR RIGHT button to Clear  
All blocked channels.  
Or, enter your Access Code on any  
blocked channel. ALL blocked chan-  
nels will be unblocked until the TV is  
powered OFF, then ON again. This will  
restore the blocked channels.  
Movie Rating  
TV Rating  
Blocking  
On  
Off  
Block Channel  
On  
Unrated  
On  
No Rating  
On  
SMART HELP  
Off  
Off  
Off  
Remember, if you tune to a  
blocked channel and enter your  
Access Code to view the channel, ALL  
blocked channels will be viewable until  
the TV has been turned off. When the  
TV is powered back ON, the previously  
blocked channels will be blocked again.  
Channel 9  
Blocked By SmartLock  
Channel Blocking  
Access Code  
– – – –  
Clear All  
Clear?  
If Clear All is activated, ALL blocked channels will be unblocked  
permanently or, enter your Access Code to view a tuned channel  
that is blocked with Block Channel. this will unblock ALL chan-  
nels until the TV is turned OFF and then ON again.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BLOCKING PROGRAMMING BASED ON MOVIE RATINGS  
here are two types of program rat-  
Tings within the SmartLock feature.  
One is based on the Movie Industry rat-  
ings while the other is based on the TV  
Industry ratings. Both can be used to  
block or censor programming that has  
been rated in either manner.  
Lets first look at the Movie Rating  
options of SmartLock:  
Brightness  
+
SmartLock  
Press the MENU button on the  
remote to show the on-screen menu.  
4
1
4
POWER  
2
5
8
0
6
CH+  
Press the CURSOR UP button  
and the SmartLock control will appear  
on the screen.  
7
CH–  
7
9
SmartLock  
5
Access Code  
– – – –  
A/CH  
CC  
2
8
8
6
VOL–  
STATUS  
I
3
Press the CURSOR RIGHT ᮣ  
button to display the SmartLock  
Access Code control.  
NOTE: Remember, if  
you ever forget your  
Access Code, the 0,7,1,1  
access code is the default  
code or a way to reset  
the code when the cur-  
rent access code is not  
known.  
MENU  
MUTE  
1
SmartLock  
Access Code  
XXXX  
Enter the correct access code  
number. XXXX” shows on the  
Access Code display as you press the  
NUMBERED buttons. SmartLock  
menu options will be displayed starting  
with “Setup Code”.  
5
7
Setup Code  
Press the CURSOR UP or  
DOWN buttons until the Movie  
Rating control appears on the screen.  
Press the CURSOR RIGHT ᮣ  
button to display the first of the  
Movie Rating options (G).  
Movie Rating  
G
On  
PG  
On  
Off  
Off  
Press the CURSOR UP  
or  
DOWN button to display any of  
the Movie Rating (G, PG, PG-13, R,  
NC-17, or X) options.  
When displayed, Press the CUR-  
SOR RIGHT button to turn the  
option OFF (which will allow viewing),  
or press the LEFT button to turn the  
option ON (which will allow blocking).  
NC-17  
On  
PG-13  
On  
R
On  
Off  
Off  
Off  
Channel 9  
Each Movie  
Blocked By SmartLock  
Movie Rating  
Rating can be  
turned “ON”  
or “OFF.”  
Access Code  
– – – –  
X
On  
Off  
SMART HELP  
When a rating is set to block,  
all higher ratings will be auto-  
matically blocked as well. Example: If  
the the PG-13 rating is set to block, the  
R, NC-17, and X ratings will also be  
blocked.  
To view a program blocked by  
the Movie Rating options, enter  
your 4 digit access code. This  
will disable all blocked Movie  
Ratings until the TV is powered  
off and on again. Then the block-  
ing options will be restored.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BLOCKING PROGRAMMING BASED ON TV RATINGS  
his portion of of the SmartLock fea-  
Tture blocks programming based on  
the TV Industry rating system.  
After selecting the Smartlock feature  
and entering your personal access  
code, the SmartLock options screen  
appears;  
TV Rating  
TV-Y  
On  
Scroll the menu using the CUR-  
SOR UP or DOWN buttons  
until the TV RATING control appears  
on the screen.  
Off  
1
4
POWER  
CH+  
2
5
8
0
3
6
To view a program  
blocked by the TV  
Rating options, enter  
your 4 digit access  
code. This will dis-  
able all blocked TV  
Ratings until the TV  
is powered off and on  
again. Then the  
CH–  
7
9
Press the CURSOR RIGHT but-  
ton to display the first TV Rating  
option (TV-Y).  
TV-Y7  
4
A/CH  
CC  
1
5
5
3
3
VOL–  
STATUS  
XIT  
2
MENU  
When displayed, press the CUR-  
SOR RIGHT button to turn the  
control ON (will block TV-Y program-  
ming), or press the CURSOR LEFT  
button to turn the control OFF (will  
allow viewing of TV-Y programming).  
Repeat for the TV-G option.  
SLEEP  
MUTE  
TV-G  
On  
Off  
1
4
blocking options will  
be restored.  
TV-PG  
The ratings of TV-Y7, TV-PG, TV-14,  
TV-MA can be customized to block V  
(violence), FV (fantasy violence), S  
(sexual situations), L (coarse language),  
or D (suggestive dialogue).  
Channel 9  
Blocked By SmartLock  
TV Rating  
Press the CURSOR UP or  
DOWN button to display the  
desired rating control.  
Access Code  
– – – –  
TV-14  
TV-MA  
Use the CURSOR RIGHT but-  
ton on the remote to display the rating  
sub-menu. Scroll each setting and press  
the CURSOR RIGHT button to  
turn the select control ON or press the  
CURSOR LEFT button to turn it  
OFF.  
TV-Y7, TV-PG, TV-14, TV-MA Sub-menu options to block TV ratings.  
Block All  
On  
D
FV  
On  
On  
Off  
Off  
Off  
Off  
Off  
Off  
TV Ratings and Rating Sub-Menus  
When a TV Rating is selected to block,  
ALL higher ratings will be blocked also.  
L
On  
S
On  
V
On  
TV-Y - (All children -- This program is designed to be appropriate for all children.) Designed for a very young audience, including children ages 2-6. This type of pro-  
gramming is not expected to frighten younger children.  
TV-Y7 - (Directed to Older Children -- This program is designed for children age 7 and above.) It may be more appropriate for children who have acquired the develop-  
ment skills needed to distinguish between make-believe and reality. This programming may include mild fantasy and comic violence (FV).  
TV-G - (General Audience -- Most parents would find this program suitable for all ages.) This type of programming contains little or no violence, no strong language and  
little or no sexual dialogue or situations.  
TV-PG - (Parental Guidance Suggested -- This program contains material that parents may find unsuitable for younger children.)This type of programming contains one  
or more of the following: some suggestive dialogue (D), infrequent coarse language (L), some sexual situations (S), or moderate violence (V).  
TV-14 - (Parents Strongly Cautioned -- This program contains some material that many parents would find unsuitable for children under 14 years of age.) This type of  
programming contains one or more of the following: intensely suggestive dialogue (D), strong coarse language (L), intense sexual situations (S), or intense violence (V).  
TV-MA - (Mature Audience Only -- This program is specifically designed to be viewed by adults and therefore may be unsuitable for children under 17.) This type of  
programming contains one or more of the following: crude indecent language (L), explicit sexual situations (S), or graphic violence (V).  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER BLOCKING OPTIONS (BLOCKING, UNRATED, NO RATING)  
martLock offers the viewer addition-  
Sal blocking features as well. With  
these Blocking Option features, censor-  
ing can be turned ON or OFF for  
Unrated or Non Rated programming.  
Brightness  
Press the MENU button on the  
+
remote to show the on-screen menu.  
SmartLock  
Press the CURSOR UP button  
and the SmartLock control will appear  
on the screen.  
4
1
4
POWER  
2
5
8
0
6
CH+  
Press the CURSOR RIGHT ᮣ  
button to display the SmartLock  
Access Code control.  
CH–  
7
7
9
SmartLock  
5
Access Code  
– – – –  
A/CH  
CC  
2
7
6
VOL–  
STATUS  
EXIT  
3
Enter the correct access code  
number. XXXX” shows on the  
Access Code display as you press the  
NUMBERED buttons. SmartLock  
menu options will be displayed starting  
with “Setup Code”.  
MENU  
LEEP  
MUTE  
6
SmartLock  
Access Code  
XXXX  
1
5
7
Press the CURSOR UP or  
DOWN buttons until the Blocking,  
Unrated, or No Rating control appears  
on the screen.  
Setup Code  
When displayed, Press the CUR-  
SOR RIGHT button to turn the  
option OFF (which will allow viewing)  
or press the LEFT button to turn the  
option ON (which will allow blocking).  
TV Rating  
Movie Rating  
Blocking  
On  
Off  
When finished, press the STATUS  
/EXIT button to remove the menu item  
from the TV screen.  
Channel 9  
Blocked By SmartLock  
Content Advisory  
Access Code  
– – – –  
Unrated  
On  
No Rating  
On  
Off  
Off  
NOTE: Remember, if you ever forget  
your Access Code, the 0,7,1,1 access  
code is the default code or a way to  
reset the code when the current access  
code is not known.  
If the BLOCK UNRATED or BLOCK NO  
RATINGS controls are turned ON, all unrated  
programs and programs containing NO content  
advisory data will display the screen shown  
above. To watch the channel enter your access  
code, or change the BLOCK UNRATED and  
BLOCK NO RATINGS back to off.  
OTHER BLOCKING OPTION DEFINITIONS:  
BLOCKING: This is what might be called the “master switch” for SmartLock. When in the OFF position, ALL blocking/cen-  
soring is turned off (or disabled). When in the ON position, ALL blocking based on specifically blocked settings will take place.  
UNRATED: ALL unrated programs based on the Movie Ratings or TV Ratings can be blocked if this feature is set to ON and  
the BLOCKING feature is set to ON.  
NO RATING: ALL programming with NO content advisory data can be blocked if this feature is set to ON and the BLOCK-  
ING feature is set to ON.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING TIPS  
CAUTION: A video source (such as a video game, Compact Disc Interactive - CDI, or  
TV information channel) which shows a constant non-moving pattern on the TV screen,  
can cause picture tube damage. When your TV is continuously used with such a source  
the pattern of the non-moving portion of the game (CDI, etc.) could leave an image  
permanently on the picture tube. When not in use, turn the video source OFF.  
Regularly alternate the use of such video sources with normal TV viewing.  
lease make these simple checks  
Pbefore calling for service. These  
tips can save you time and money since  
charges for TV installation and adjust-  
ment of customer controls are not cov-  
ered under your warranty.  
• Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert plug into  
outlet and push POWER button again.  
No Power  
• Check that outlet is not on a wall switch. Be sure fuse is not blown on AC Power strip.  
• Check antenna connections. Are they properly secured to the TV's 75plug?  
No Picture  
No Sound  
• Check the TUNER MODE control for CABLE or ANTENNA setting.  
• Check the VOLUME buttons.  
• Check the MUTE button on the remote control.  
• Check batteries. Replace with AA Heavy Duty (Zinc Chloride) or Alkaline batteries  
if necessary.  
• Clean the remote and the remote sensor window on the TV.  
• Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert plug into  
outlet and push POWER button again. Be sure fuse is not blown on AC Power strip.  
• Check to be sure TV outlet is not on a wall switch.  
Remote Does Not  
Work  
TV Displays Wrong  
Channel or No  
Channels Above 13  
• Repeat channel selection.  
• Add desired channel numbers (CHANNEL control) into TV memory.  
• Check to be sure the TUNER MODE control is set to the CABLE option.  
INDEX  
Alternate Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Closed Captioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15  
Antenna TV Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Color Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
SmartLock Controls  
Factory Service Information . . . . . . . . . . . . . . . . . . . . . . .26-27  
Access Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25  
Blocking Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Language Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
Blocking Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Picture Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
Clear All Blocked Channels . . . . . . . . . . . . . . . . . . . . . . .21 Registration Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2  
Movie Rating Controls . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
TV Rating Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
Understanding SmartLock . . . . . . . . . . . . . . . . . . . . . . . .18 Sharpness Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
Auto Program Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Sleeptimer Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
Basic Remote Control Operation . . . . . . . . . . . . . . . . . . . . . . .8 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4  
Basic TV Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Tint Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
Basic VCR to TV Connection . . . . . . . . . . . . . . . . . . . . . . . . .7 Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25  
Brightness Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Tuner Mode Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
Cable TV Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28  
Channel Edit Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FACTORY SERVICE LOCATIONS  
Detroit/Toledo  
Cleveland/  
N Ohio •  
Chicago  
Columbus  
San Francisco/Metro Area  
Los Angeles  
Charlotte  
Pittsburgh/WV Area  
Knoxville/E Tennessee  
Philadelphia/S New Jersey  
Atlanta/N Georgia  
Dallas  
Wash/Balt  
Orlando  
Houston  
Tampa/W Florida  
Ft. Myers/SW Florida  
Miami/SE Florida  
Indicates In-Home Service Only  
Indicates In-Home/Carry-In Service  
NOTE: If you reside in one of our Philips Factory Service Branch areas (see directory on back), you can contact the nearest Service Branch to obtain  
efficient and expedient repair for your product. If your product is In-Warranty, you should have proof-of-purchase to ensure No Charge Service. For  
Out-of-Warranty service, call the location nearest you.  
NOTA: Si vous résidez dans une des régions desservies par une succursale de service après vente du fabricant Philips (voir liste ci-dessous), vous  
pourrez contacter la branche de service après vente la plus près de chez vous pour obtenir un service après vente rapide et efficace. Si le produit est  
sous garantie, il suffira de présenter une preuve d`achat pour bénéficier d'un service sans frais. Pour les produits non couverts par la garantie, con-  
tactez le centre le plus près de chez vous.  
NOTA: Si Ud. reside en una de nuestras zonas para sucursales Philips de servicio al de fábrica (ver directorio más abajo), Ud. puede comunicarse con  
la sucursal de servicio más cercana para obtener una reparación oportuna y eficaz de su producto. Si su producto está todavía bajo garantía, Ud.  
debe presentar comprobante de compra para no ocasionar ningunos cargos por servicio. Para servicio después del vencimiento de la garantía, llame  
al lugar más cercano de los abajo indicados.  
In Canada  
How you can obtain efficient and expedient carry-in, mail-in, or in-home service for your product  
Please contact Philips at  
1-800-661-6162 (French speaking)  
1-800-363-7278 (English speaking)  
Au Canada  
Comment obtenir le service après-vente pour les produits apportés ou envoyés par la poste à notre centre de service ou le service à domicile  
Veuillez contacter philips á:  
1-800-661-6162 (Francophone)  
1-800-363-7278  
En el Canadá  
Cómo recibir servicio efficiente para su producto, en persona, por correo o a domicillo  
Favor de comunicarse con Philips al:  
1-800-661-6162 (francófono)  
1-800-363-7278 (anglófono)  
EL4482-3 Rev. CC  
3135 015 07541  
MAC2929 Rev. BB - 1/1/2001  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FACTORY SERVICE LOCATIONS  
QUALITY SERVICE IS AS CLOSE AS YOUR TELEPHONE! SIMPLY LOOK OVER THE LIST BELOW FOR THE NUMBER OF A FACTORY SERVICE CENTER  
NEAR YOU. YOUR PRODUCT WILL RECEIVE EFFICIENT AND EXPEDIENT CARRY-IN, MAIL-IN, OR IN-HOME SERVICE, AND YOU WILL RECEIVE PEACE OF  
MIND,  
KNOWING YOUR PRODUCT IS BEING GIVEN THE EXPERT ATTENTION OF PHILIPSFACTORY SERVICE.  
COMMENT OBTENIR NOTRE SERVICE APRÈS VENTE RAPIDE ET EFFICACE SOIT PAR COURRIER, À DOMICILE, OU EN SE PRÉSENTANT À UN CENTRE DE SERVICE PHILIPS. PLUS DE 600 CENTRES  
DE RÉCEPTION DE PRODUITS À RÉPARER À TRAVERS LE PAYS: CONTACTER LE CENTRE DE SERVICE AUX CONSOMMATEURS LE PLUS PROCHE POUR SAVOIR LEMPLACEMENT DE CES DÉPÔTS  
DANS UN RAYON DE 50 À 75 MILES (80 KM À 120 KM) DU CENTRE DE SERVICE LOCAL.  
MO OBTENER UN SERVICIO OPORTUNO Y EFICIENTE POR CORREO, EN CASA O EN PERSONA PARA SU PRODUCTO A TRAVÉS DE UN CENTRO PHILIPS DE SERVICIO. MAS DE 600 SITIOS POR  
TODO EL PAIS PARA LA RECEPCION DE PRODUCTOS NECESITADOS DE REPARACIONES: COMUNICARSE CON EL CENTRO DE SERVICIO DE FABRICA MAS CERCANO PARA ESTOS LUGARES DENTRO  
DE UN RADIO DE 80 A 120 KM (50 A 75 MILLAS) DEL CENTRO DE SERVICIO LOCAL.  
ATLANTA  
CLEVELAND  
CHICAGO  
Philips Factory Service  
200 N. Cobb Pkwy., Suite 120  
Marietta, GA 30062  
800-273-1501  
Philips Factory Service  
950 Keynote Circle  
Brooklyn Heights, OH 44131  
800-331-7037  
Philips Factory Service  
1279 W. Hamilton Pkwy.  
Itasca, IL 60143  
800-531-2922  
TAMPA  
DETROIT  
KNOXVILLE  
Philips Factory Service  
1911 US Highway 301 North  
Tampa, FL 33619  
800-442-2027  
Philips Factory Service  
25173 Dequindre  
Madison Heights, MI 48071  
800-438-1398  
Philips Factory Service  
6700 D Papermill Rd.  
Knoxville, TN 37919  
800-821-1767  
SAN FRANCISCO  
Philips Factory Service  
681 East Brokaw Rd.  
San Jose, CA 95112  
800-300-9013  
DALLAS  
PHILADELPHIA  
Philips Factory Service  
415 N. Main Street, #107  
Euless, TX 76040  
800-952-3254  
Philips Factory Service  
352 Dunks Ferry Rd.  
Bensalem, PA 19020  
800-847-9320  
HOUSTON  
Philips Factory Service  
1110 N. Post Oak Rd., Suite 100  
Houston, TX 77055  
800-952-3254  
MAC2929 1/1/2001  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED W ARRANTY  
CO LO R TELEVISIO N  
90 Days Free Labor  
One Year Free Replacement of Parts (Two Years Free Replacement on Color Picture Tube)  
This product can be repaired in-home.  
W HO IS CO VERED?  
MAKE SURE YO U KEEP...  
You must have proof of purchase to receive warranty service. A sales  
receipt or other document showing that you purchased the product is  
considered proof of purchase.  
Please keep your sales receipt or other document showing proof of  
purchase. Attach it to this owners manual and keep both nearby.  
Also keep the original box and packing material in case you need to  
return your product.  
W HAT IS CO VERED?  
BEFO RE REQ UESTING SERVICE...  
Please check your owners manual before requesting service.  
Adjustments of the controls discussed there may save you a service  
call.  
Warranty coverage begins the day you buy your product. For 90 days  
thereafter, all parts will be repaired or replaced free, and labor is free.  
From 90 days to one year from the day of purchase, all parts will be  
repaired or replaced free, but you pay for all labor charges. From one  
to two years from the day of purchase, you pay for the replacement  
or repair of all parts except the picture tube, and for all labor charges.  
After two years from the day of purchase, you pay for the replace-  
ment or repair of all parts, and for all labor charges.  
TO GET W ARRANTY SERVICE IN U.S.A.,  
PUERTO RICO O R U.S. VIRGIN ISLANDS...  
Contact a Philips factory service center (see enclosed list) or author-  
ized service center to arrange repair.  
All parts, including repaired and replaced parts, are covered only for  
the original warranty period. When the warranty on the product  
expires, the warranty on all replaced and repaired parts also expires.  
(In U.S.A., Puerto Rico and U.S. Virgin Islands, all implied warranties,  
including implied warranties of merchantability and fitness for a partic-  
ular purpose, are limited in duration to the duration of this express  
warranty. But, because some states do not allow limitations on how  
long an implied warranty may last, this limitation may not apply to  
you.)  
W HAT IS EXCLUDED?  
Your warranty does not cover:  
labor charges for installation or setup of the product, adjustment of  
customer controls on the product, and installation or repair of  
antenna systems outside of the product.  
TO GET W ARRANTY SERVICE IN CANADA...  
Please contact Philips at:  
product repair and/or part replacement because of misuse, acci-  
dent, unauthorized repair or other cause not within the control of  
Philips Consumer Electronics Company.  
1-800-894-5463  
1-800-363-7278  
reception problems caused by signal conditions or cable or antenna  
systems outside the unit.  
a product that requires modification or adaptation to enable it to  
operate in any country other than the country for which it was  
designed, manufactured, approved and/or authorized, or repair of  
products damaged by these modifications.  
(In Canada, this warranty is given in lieu of all other warranties. No  
other warranties are expressed or implied, including any implied war-  
ranties of merchantability or fitness for a particular purpose. Philips is  
not liable under any circumstances for any direct, indirect, special, inci-  
dental or consequential damages, howsoever incurred, even if notified  
of the possibility of such damages.)  
incidental or consequential damages resulting from the product.  
(Some states do not allow the exclusion of incidental or conse-  
quential damages, so the above exclusion may not apply to you.  
This includes, but is not limited to, prerecorded material, whether  
copyrighted or not copyrighted.)  
REMEMBER...  
• a product used for commercial or institutional purposes.  
Please record the model and serial numbers found on the product  
below. Also, please fill out and mail your warranty registration card  
promptly. It will be easier for us to notify you if necessary.  
W HERE IS SERVICE AVAILABLE?  
Warranty service is available in all countries where the product is offi-  
cially distributed by Philips Consumer Electronics Company. In coun-  
tries where Philips Consumer Electronics Company does not distrib-  
ute the product, the local Philips service organization will attempt to  
provide service (although there may be a delay if the appropriate spare  
parts and technical manual(s) are not readily available).  
MODEL # ________________________________________________  
SERIAL # ________________________________________________  
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.  
Philips Consum er Electronics Com pany, P.O . Box 2976, Longview, Texas 75606,  
(903) 242-4800  
Printed in U.S.A.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Kuhn Rikon Mixer 3015 User Manual
Lenovo Laptop Flex 3 User Manual
Life Fitness Bicycle LM350000 5 User Manual
Magellan GPS Receiver RV5365T LMB User Manual
Magellan Home Security System MG 6060 User Manual
Magnavox DVD VCR Combo ZV450MW8A User Manual
Makita Lawn Mower PLM5120 User Manual
Martin Audio Speaker C48T User Manual
Maxi Cosi Car Seat Priori XP User Manual
Memorex Answering Machine MPH2089 User Manual