USER MANUAL
Color Television
13MT143S
20MT133S
20MS233S
Thank you for choosing Magnavox.
Need help fast?
Read your User Manual first for quick tips that make using
your Magnavox product more enjoyable. If you have read
your instructions and still need assistance you may access our
online help at
or
call 1-800-705-2000
while with your product.
IB8470E001
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
1.
2.
3.
4.
5.
6.
7.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any of the ventilation openings. Install in accordance
with the manufacturers instructions.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and third grounding prong.
The wide blade or third prong are provided for your safety.When
the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
17. Tilt/Stability - All televisions must comply with recommended
international global safety standards for tilt and stability properties of
its cabinet design.
• Do not compromise these design standards by applying excessive
pull force to the front, or top, of the cabinet which could ultimately
overturn the product.
• Also, do not endanger yourself, or children, by placing electronic
equipment/toys on the top of the cabinet. Such items could unsus-
pectingly fall from the top of the set and cause product damage
and/or personal injury.
8.
9.
18. Wall or Ceiling Mounting - The appliance should be mount-
ed to a wall or ceiling only as recommended by the manufacturer.
19. Power Lines - An outdoor antenna should be located away from
power lines.
20. Outdoor Antenna Grounding - If an outside antenna is
connected to the receiver, be sure the antenna system is grounded so
as to provide some protection against voltage surges and built up
static charges.
10. Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12.
Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984,
provides information with respect to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an anten-
na discharge unit, size of grounding connectors, location of antenna-
discharge unit, connection to grounding electrodes, and requirements
for the grounding electrode. See Figure below.
Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the appara-
tus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
21. Object and Liquid Entry - Care should be taken so that
objects do not fall and liquids are not spilled into the enclosure
through openings.comply with recommended international global safety
standards for tilt and stability properties of its cabinet design.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects
have fallen into apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
15. This product may contain lead and mercury. Disposal of these materi-
als may be regulated due to environmental considerations. For dispos-
al or recycling information, please contact your local authorities or
22. Battery Usage CAUTION - To prevent battery leakage that
may result in bodily injury, property damage, or damage to the unit:
• Install all batteries correctly, with + and - aligned as marked on
the unit.
• Do not mix batteries (old and new or carbon and alkaline, etc.).
• Remove batteries when the unit is not used for a long time.
16. Damage Requiring Service - The appliance should be serv-
iced by qualified service personnel when:
Example of Antenna Grounding
A.
B.
The power supply cord or the plug has been damaged; or
Objects have fallen, or liquid has been spilled into the appli-
ance; or
The appliance has been exposed to rain; or
The appliance does not appear to operate normally or
exhibits a marked change in performance; or
The appliance has been dropped, or the enclosure damaged.
as per NEC - National Electric Code
C.
D.
GROUND CLAMP
ANTENNA LEAD IN WIRE
E.
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
Note to the CATV system installer: This
reminder is provided to call the CATV system
installer's attention to Article 820-40 of the NEC
that provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
UIPMELECTRIC SERVICE EQUIPMENT
POWERSERVICEGROUNDING ELECTRODE SYSTEM
(NEC ART 250, PART H)
connected to the grounding system of the building,
as close to the point of cable entry as practical.
Download from Www.Somanuals.com. All Manuals Search And Download.
PANEL LAYOUT
Panel
Sequence
and
MODEL
REGISTRATION
INFORMATION
PA1NEL PA2NEL
SAFETY
INFO
COVER
Panel Index
Side 1
PA3NEL PA4NEL PA5NEL PA6NEL PA7NEL PA8NEL
PANEL PANEL PANEL PANEL PANEL
PA9NEL 10 11 12 13 14
PANEL PANEL
PANEL PANEL PANEL PANEL
Side 2
19 20
15 16 17 18
PANEL PANEL PANEL PANEL PANEL PANEL
21 22 23 24 25 26
PANEL PANEL PANEL PANEL PANEL PANEL
27 28 29 30 31 32
PANEL INDEX
Subject
Panel No. Subject
Panel No.
Alternate Channel . . . . . . . . . . . . . . . . . .26 Picture Menu Controls . . . . . . . . . . . . . .11
Antenna Basic Connection . . . . . . . . . . . .1 Remote Batteries . . . . . . . . . . . . . . . . . . . .4
Front Audio/Video Input Jacks . . . . . . . . .3 Remote Control Button Descriptions .5-6
Automatically Program TV . . . . . . . . . . . .9 Sleeptimer . . . . . . . . . . . . . . . . . . . . . . . .22
Basic Cable Connection . . . . . . . . . . . . . .1 SmartLock™ Controls
Basic Remote Operation . . . . . . . . . . . . . .4
Basic Television Operation . . . . . . . . . . . .4
Cable Box Connection . . . . . . . . . . . . .1-2
Cable TV Control (Tuner Mode) . . . . . . .8
Care and Cleaning . . . . . . . . . . . . . . . . . .28
Channel Edit . . . . . . . . . . . . . . . . . . . . . .10
Closed Caption Control . . . . . . . . . . . . .21
Access Code . . . . . . . . . . . . . . . . . . . . .15
Block Channels . . . . . . . . . . . . . . . . . . .16
Blocking/Clearing All Channels . . . . . . .17
Movie Ratings . . . . . . . . . . . . . . . . . . . .18
Other Blocking Options . . . . . . . . . . . .20
TV Ratings . . . . . . . . . . . . . . . . . . . . . . .19
Understanding SmartLock™ . . . . . . . .14
Format Control . . . . . . . . . . . . . . . . . . . .13 SmartPicture™ Control . . . . . . . . . . . . .23
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . .29 SmartSound™ Control . . . . . . . . . . . . . .24
Language Control . . . . . . . . . . . . . . . . . . .7 SmartSurf . . . . . . . . . . . . . . . . . . . . . . . .25
Limited Warranty . . . . . . . . . . . . . . . . . .32 Troubleshooting . . . . . . . . . . . . . . . . . . .27
TM
TM
TM
SmartPicture , SmartSound , and SmartLock are regis-
tered trademarks of Philips Consumer Electronics North
America. Copyright © 2003 Magnavox. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Antenna Connection
1
combination antenna receives normal
Abroadcast channels (VHF 2-13 and
UHF 14-69). Your connection is easy
since there is only one 75Ω (ohm)
antenna plug on the back of your TV -
and that’s where the antenna goes.
If your antenna has a round
cable (75 ohm) on the end, then
1
Combination
VHF/UHF Antenna
(Outdoor or Indoor)
75Ω
you're ready to connect it to the
TV. Go to step 2.
Rear of TV
If your antenna has flat twin-
lead wire (300 ohm), you first
need to attach the antenna wires
to the screws on a 300 to 75
ohm adapter (not supplied with
TV).
Twin Lead
Wire
Push the round end of the
adapter or antenna cable onto
2
75Ω
the 75Ω jack on the rear of the
TV. If the round end of the
antenna cable is threaded, screw
it down tight.
Round Cable 75Ω
Basic CableTV Connection
f Cable TV signal into your home is a
Isingle cable (75 ohm) the connection
to the TV is easy.
Connect the Cable TV cable
directly to the 75Ω jack on the
1
TV.
75Ω
Rear of TV
Cable TV Signal
Helpful Hints
If no Video Signal is present, the TV
will shut itself off in about 10 min-
utes. If the TV is tuned to the AV
channel and there is no Video Signal
present, the screen will remain black
and the TV will shut itself off in about
10 minutes.
Use Auto Program as described on
panel 9 to set up channels that are
available in your area. Use the CH +/–
buttons to scan available channels.
RF Coaxial
Cable 75Ω
75Ω
Download from Www.Somanuals.com. All Manuals Search And Download.
Cable Box Connections
2
f you cable signal uses a cable box or
Idecoder, follow the easy steps below to
complete the connection.
Cable Signal IN
from the Cable
Company
Cable Box (w/RF In/Outputs):
This connection will be mono.
Connect the Cable Company
2 1
VIDEO
IN OUT
AUDIO IN
SPDIF
R
L
S-VIDEO
CABLE
IN
IR
DVD-D OUT
supplied cable to the signal
IN(put) plug on the back of the
TO
TV/VCR
1
Y
Pb
Pr
AUDIO OUT
OPTICAL
SPDIF
USB
TV
PASSCARD
Cable Box.
Jack Panel Back of Cable Box
Using a separate round coaxial
cable, connect one end to the
2
3
OUT(put) (TO TV) plug on
the back of the Cable Box.
3
Connect the other end of the
round coaxial cable to the 75Ω
75Ω
75Ω
input on the back of the television.
Round 75Ω
Coaxial Cable
Screw it down finger tight.
Jack Panel Back of TV
NOTE: If applicable, set the OUTPUT
CHANNEL SWITCH on the back of the
cable box to CH 3 or 4. Tune the TV to
the same channel and change channels
at the cable box. In some cases, the
cable box will automatically tune to
either channel 3 or 4, change channels
until the picture appears.
Helpful Hints
If no Video Signal is present, the TV
will shut itself off in about 10 minutes.
If the TV is tuned to the AV channel
and there is no Video Signal present,
the screen will remain black and the
TV will shut itself off in about 10 min-
utes.
Download from Www.Somanuals.com. All Manuals Search And Download.
Front AV (Audio/Video) Input Connections
3
Mono Devices
udio and Video Front Inputs are avail-
Aable for a quick connection of a VCR,
to playback video from a camera, or
attach a gaming device. Use the AV but-
ton on the remote control to tune these
inputs.
Connect the video (yellow)
MENU
VIDEO
AUDIO
—
VOLUME +
CHANNEL
POWER
cable from the Video output on
1
Front Jack panel of TV
the Camera (or accessory device)
to the Video (yellow) Input locat-
ed on the FRONT of the TV.
MENU
VIDEO
AUDIO
—
VOLUME
+
CHANNEL
POER
3
2
1
For Mono Devices: Connect
one end of the audio cable from
Yellow
Video
cable
2
White
the Audio Out jack on the device
to the Audio In (white) jack on
the FRONT of the television.
Audio cable
OUT
AUDIO
IN
OUT
VIDEO
IN
ANTENNA
IN
ANTENNA
OUT
3
5
For Stereo Devices: Connect
one end of the audio cables from
the Audio Out jacks on the
device to the Audio In (red and
white) jacks on the FRONT of
the television.
VCR, Camcorder,
DVD
Player, etc. with
Audio and
Video Out jacks
Stereo Devices:
Turn the TV and the accessory
device ON.
3
Press the CH+ or CH- but-
ton on the remote control to
tune the TV to the front input
jacks. “AV” will appear on the TV
screen.
4
MENU
—
VOLUME +
CHANNEL
POWER
Front Jack panel of TV
Press the PLAY ᮣ button on
the accessory device to view
5
playback, or to access the acces-
sory device (camera, gaming unit,
etc.).
3
1
2
Red and White
Audio cables
Yellow
Video
cable
ANTENNA
IN
OUT
OUT
VIDEO
R
AUDIO
L
ANTENNA
OUT
VCR,
3
5
Camcorder,
DVD
IN
IN
Player, etc.
with
Audio and
Video Out jacks
Download from Www.Somanuals.com. All Manuals Search And Download.
BasicTV and Remote Control Illustrations
Television
4
Press POWER to turn on the
Connect
headphones
(not sup-
plied) to the
; jack.
TV.
1
2
Press VOLUME + to increase
the sound level. Press VOLUME
– to lower the sound level.
MENU
VIDEO
AUDIO
—
VOLUME
+
CHANNEL
POWER
Press both buttons at the
same time to display the TV’s
on-screen menu. Once in the
menu, use these buttons to make
menu adjustments or selections.
Press CHANNEL ;8 or 9 to
select TV channels.
MENU
VIDEO
AUDIO
—
VOLUME
+
CHANNEL
POWER
Non-Stereo
models (white
AUDIO IN jack)
Remote
Sensors
(point
remote
here)
Connect an acces-
sory device to the
AUDIO/VIDEO IN
jacks.
3
4
Remote Control
Point the remote control toward
the remote sensor on the front of
the TV when operating the TV.
Stereo models (red and
white AUDIO IN jacks)
Remote sensor on
remote control
Battery Installation
To load the supplied batteries into
the remote:
R
E
W
O
P
3
+
H
C
2
6
8
1
–
H
C
5
9
0
4
+
L
O
V
Remove the battery compart-
C
C
7
–
L
O
V
H
/C
A
ment lid on the back of the
S
U
T
A
T
E
T
S
MEN
1
2
U
M
T
I
X
E
remote.
P
T
E
R
A
E
L
S
M
S
F
R
U
S
PICTURE
SOUND
Place the batteries (two AA)
in the remote. Be sure the (+)
and (-) ends of the batteries line up
correctly (as marked inside the
remote).
Battery Installation
Reattach the battery lid.
3
Helpful Hints
The current channel number will
appear briefly when you first turn on
the TV or when you change channels.
Press STATUS/EXIT to see the cur-
rent channel number.
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of Remote Control Buttons
5
NUMBER Buttons
POWER
CH
1
4
2
5
8
0
3
6
Press the Number buttons to select TV
channels or to enter values in the menu.
For single-digit channels, press the
Number button for the channel you
want. The TV will pause briefly before
going to the chosen channel.
CH
7
9
A/CH Button
A/CH
CC
VOL
VOL
(Alternate Channel)
Press to switch between the last channel
and the present channel.
Details are on panel 26.
STATUS
EXIT
STATUS/EXIT Button
Press to see the current channel number.
Press to remove a menu.
MENU
CC Button
SLEEP
MUTE
Press to activate Closed Captioning.
Details are on panel 21.
SURF
SMART
SLEEP Button
Press to set the TV to turn itself off with-
in a certain time. Details are on panel 22.
PICTURE SOUND
SmartSurf
If your TV model has SmartSurf, press this
button to move through the channels you
have set. Details are on panel 25.
MAGNAVOX
Continued on Next Panel
Download from Www.Somanuals.com. All Manuals Search And Download.
(Cont’d)
Description of Remote Control Buttons
6
POWER button
Press to turn the TV on or off.
POWER
1
4
2
5
8
0
3
6
CH
CH(annel) +/– Buttons
Press to scan memorized channels.
CH
7
9
VOL(ume) +/– Buttons
Press to increase or decrease the
sound.
A/CH
CC
VOL
VOL
STATUS
EXIT
MENU Button
Press to see the menu. Press
repeatedly to return to previous
menus or remove the menus.
MENU
Arrow 2 3 5 ▼ Buttons
Press to select or adjust items in
the menu.
SLEEP
MUTE
MUTE Button
SURF
SMART
Press to eliminate or restore the TV
sound. MUTE will appear on the TV
when the sound is muted.
PICTURE SOUND
SMART SOUND Button
Press to choose a sound setting.
Details are on panel 24.
SMART PICTURE Button
Press to choose a picture setting.
Details are on panel 23.
MAGNAVOX
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Use the Language Control
7
or our Spanish speaking TV owners
Fan on-screen LANGUAGE option is
present. With the LANGUAGE control
you can set the TV’s on-screen menu to
be shown in either English or Spanish.
Main
Picture
Sound
Features
Install
Brightness
Color
Picture
Sharpness
Tint
Main
Picture
Sound
Features
Install
Language
Tuner Mode
Auto Program
Channel Edit
Press the MENU button on
the remote to show the on-
More...
1
screen menu.
Press the CURSOR UP ▲
POWER
CH
1
4
2
5
8
0
3
6
9
or DOWN ▼ buttons to
2
scroll through the on-screen
menu until the word
INSTALL is highlighted.
Press the CURSOR RIGHT
ᮣ button to display the
INSTALL menu features.
Install
Language
Tuner Mode
Auto Program
Channel Edit
English
CH
7
A/CH
CC
VOL
VOL
6
STATUS
EXIT
1
3
4
MENU
SLEEP
OR
MUTE
Press CURSOR UP ▲ or
DOWN ▼ buttons to scroll
3
5
SURF
SMART
Instalar
Idioma
Sintonia
Auto Programa
Editar Canal
the Install features until the
word LANGUAGE is high-
lighted.
Press the CURSOR RIGHT
ᮣ button repeatedly to
PICTURE SOUND
2
4
5
MAGNAVOX
select ENGLISH or
ESPAÑOL (Spanish).
When finished, press the
STATUS /EXIT button to
remove the menu from the
TV’s screen.
6
HELPFUL HINT
The Language control only makes
the TV’s on-screen MENU items
appear in English or Spanish text.
It does not change the other on-
screen text features such as Closed
Caption (CC) TV shows.
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE TUNER MODE CONTROL
8
he TUNER MODE control allows you
Tto change the TV’s signal input to
either ANTENNA, CABLE, or AUTO
mode. It’s important for the TV to know
what type of signal that is connected.
(From a Cable TV signal or a normal
Antenna signal.) In the AUTO mode,
when the AUTO PROGRAM feature is
activated, the TV will automatically
choose the correct mode.
Main
Picture
Sound
Features
Install
Brightness
Color
Picture
Sharpness
Tint
Main
Picture
Sound
Features
Install
Language
Tuner Mode
Auto Program
Channel Edit
More...
POWER
1
4
2
5
8
0
3
CH
Press the MENU button on
6
Install
Language
Tuner Mode
Auto Program
Channel Edit
English
Antenna
the remote to show the on-
screen menu.
Press the CURSOR UP ▲ or
DOWN ▼ buttons to scroll
through the on-screen menu until
the word INSTALL is highlight-
ed.
CH
7
9
1
2
A/CH
CC
VOL
VOL
6
STATUS
EXIT
1
MENU
SLEEP
OR
MUTE
3
5
SURF
SMART
Install
Language
Tuner Mode
Auto Program
Channel Edit
Press the CURSOR RIGHT
PICTURE SOUND
English
Cable
2
4
ᮣ button to display the
3
4
INSTALL menu features.
Press CURSOR UP ▲ or
DOWN ▼ buttons to scroll
the Install features until the
words TUNER MODE is high-
lighted.
MAGNAVOX
OR
Install
Language
English
Auto
Press the CURSOR RIGHT
Tuner Mode
Auto Program
Channel Edit
ᮣ button to select either
5
ANTENNA, CABLE, or
AUTO mode.
When finished, press the
STATUS /EXIT button to
6
remove the on-screen menu
from the TV’s screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO AUTOMATICALLY PROGRAM TV
9
our TV can automatically set itself
Yfor local area (or Cable TV) chan-
nels. This makes it easy for you to
select only the TV stations in your
area when the CHANNEL (+) or (–)
buttons are pressed.
Main
Picture
Sound
Features
Install
Brightness
Color
Picture
Sharpness
Tint
Main
Picture
Sound
Features
Install
Language
Tuner Mode
Auto Program
Channel Edit
More...
Note: Make sure the antenna or
cable signal connection has been
completed before AUTO PROGRAM
is activated.
POWER
1
4
2
5
8
0
3
Press the MENU button
CH
6
Install
Language
Tuner Mode
Auto Program
Channel Edit
on the remote to show the
on-screen menu.
Press the CURSOR UP ▲
or DOWN ▼ buttons to
scroll through the on-screen
menu until the word
INSTALL is highlighted.
2
4
1
2
CH
7
9
A/CH
CC
VOL
VOL
6
STATUS
EXIT
1
MENU
SLEEP
MUTE
Auto Program
Channel
3
5
SURF
Press the CURSOR
SMART
12
13
RIGHT ᮣ button to dis-
PICTURE SOUND
2
4
3
play the INSTALL menu
features.
Press CURSOR UP ▲ or
DOWN ▼ buttons to
scroll the Install features until
the words AUTO PRO-
GRAM are highlighted.
Auto Program
Channel
4
MAGNAVOX
Auto Program
Channel
14
Press the CURSOR
RIGHT ᮣ button to start
the Auto Program scanning
of channels. Auto
Programming will store all
available channels in the TV’s
memory then tune to the
lowest available channel
when done.
5
HELPFUL
HINT
When CABLE is selected, channels
1-125 are available.
When ANTENNA is selected,
When finished, press the
channels 2-69 are available.
STATUS/EXIT button to
6
When AUTO is selected, the TV
will automatically set itself to the
correct mode based on the type of
signal it detects when the AUTO
PROGRAM feature is activated.
remove the menu from the
TV’s screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO ADD OR DELETE CHANNELS
10
hannel Edit makes it easy for you to ADD
Cor DELETE channels from the list of chan-
Main
Picture
Sound
Features
Install
nels stored in the TV’s memory.
Brightness
Color
Picture
Sharpness
Tint
Press the MENU button on the
Main
Picture
Sound
Features
Install
Language
remote to show the on-screen menu.
Tuner Mode
Auto Program
Channel Edit
1
More...
Press the CURSOR UP ▲ or
DOWN ▼ buttons to scroll
2through the on-screen menu until the
6
8
word INSTALL is highlighted.
POWER
1
4
2
5
8
0
3
6
9
2
4
2
4
7
Press the CURSOR RIGHT 3
CH
6
Install
Language
Tuner Mode
Auto Program
Channel Edit
button to display the INSTALL menu
Channel No.
Skipped
CH
7
9
3features.
A/CH
CC
VOL
VOL
Press the CURSOR UP ▲ or
STATUS
EXIT
DOWN ▼ buttons to scroll the
1
MENU
4Install features until the words
CHANNEL EDIT are highlighted.
SLEEP
MUTE
Press the CURSOR RIGHT 3
Channel Edit
Channel No.
Skipped
3
5
8
SURF
SMART
12
button to display the CHANNEL
PICTURE SOUND
5EDIT options.
With the CHANNEL EDIT
options displayed, and CHANNEL
6NO. highlighted; you can use the cur-
MAGNAVOX
sor buttons to scroll through all avail-
able channels that you wish to add
(Skipped OFF), or delete (Skipped
ON) from the TV’s memory. You can
also use the NUMBERED buttons
to go directly to a specific num-
bered channel that you wish to
add or skip. Or, you can also use the
CH + or CH - to quickly scan the
channels that have not been skipped.
Channel Edit
Channel No.
Skipped
On
Off
Channel Edit
Channel No.
Skipped
Using the CURSOR DOWN ▼
button, scroll the menu to highlight
7the word SKIPPED.
Now use the CURSOR RIGHT 3
button to toggle between ON or
8OFIfFO. N is selected the channel is
HELPFUL HINT
skipped when scrolling channels
with the CH + or – buttons. If
OFF is selected the channel is not
skipped when scrolling channels
with the CH + or – buttons.
An “X” appearing in front of any channel
will indicate that channel has skip on. When
the CH + or CH - buttons are used, those
channels will be skipped.
In order to get to the external input chan-
nel AV, you must use the CURSOR Right 3
or CURSOR LEFT 2buttons.
When finished, press the STA-
TUS /EXIT button to remove the
9menu from the TV’s screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
11 HOW TO USE THE PICTURE ADJUSTMENT CONTROLS
o adjust your TV picture controls, select a
Tchannel and use the Picture Menu Controls
listed below:
Picture
Brightness
Color
Picture
Sharpness
Tint
Brightness: Press the CURSOR
50
RIGHT 3or LEFT 2 buttons
until the darkest parts of the picture
are as bright as you prefer.
1
Color: Press the CURSOR
RIGHT 3 or LEFT 2 buttons
to add or eliminate color.
2
3
Color Temp.
Picture: Press the CURSOR
RIGHT 3or LEFT 2 buttons
until lightest parts of the picture
show good detail.
Brightness
65
50
50
50
Sharpness: Press the CURSOR
RIGHT 3or LEFT 2 buttons to
improve detail in the picture.
4
5
6
Color
Tint: Press the CURSOR RIGHT
3or LEFT 2 buttons to obtain
natural skin tones.
Picture
Color Temp: Press the CURSOR
RIGHT 3or LEFT 2 buttons
to select NORMAL, COOL, or
WARM picture preferences. (NOR-
MAL will keep the whites, white;
COOL will make the whites, bluish;
and WARM will make the whites,
reddish.)
Sharpness
Tint
0
Color Temp.
Normal
Contrast +: Press the CURSOR
RIGHT 3or LEFT 2 buttons to
toggle the control On or OFF. The
Contrast + control helps to “sharp-
en” the picture quality. The black
portions of the picture become rich-
er in darkness and the whites
Warm
7
or
Cool
On
Off
Contrast +
become brighter.
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE SOUND CONTROLS (20MS233S ONLY)
12
o adjust your TV sound, select and use the
TSound Menu Controls listed below.
Treble Boost: Press the ᮣ or ᮤ
Sound
Treble Boost
Bass Boost
Balance
AVL
buttons to turn the control On or
1
On
Off. When On, the control will
enhance the high frequency sounds.
Bass Boost: Press the ᮣ or ᮤ
buttons to turn the control On or
2
Sound
Off. When On, the control will
enhance the low frequency sounds.
Balance: Press the ᮣ or ᮤ but-
tons to adjust the level of sound com-
3
4
ing from the left and right speakers.
AVL: (Auto Volume Leveler) Press
the ᮣ or ᮤ buttons to turn the
Treble Boost
On
control On or Off. When On, AVL
will level out the sound being heard
when sudden changes in volume
occur during commercial breaks or
channel changes.
or Off
On
or Off
R
Bass Boost
Balance
AVL
L
Sound: Press the ᮣ or ᮤ buttons
to select between Stereo or Mono
settings. Note: If Stereo is not pres-
ent on a selected show and the TV is
placed in the Stereo mode, the
sound coming from the TV will
remain in the Mono mode.
5
On
or Off
Sound
Mono
or Stereo
NOTE: These sound options are
only available in model 20MS233S.
They are not available in 13MT143S
or 20MT133S.
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE FORMAT CONTROL (EXPAND 4:3)
13
any times while watching movies from
Ma DVD player the image is shown in
“letter box” format. This is the format that is
shown in movie theaters. When shown on a
TV screen, the image will have areas of
black on top and bottom of the screen.
Main
Picture
Sound
Features
Install
Brightness
Color
Picture
Sharpness
Tint
Main
Picture
Sound
Features
Install
SmartLock
Format
More...
Press the MENU button on the
remote to display the on-screen
1
menu.
Press the CURSOR DOWN ▼
POWER
1
4
2
5
8
0
3
Features
SmartLock
Format
button until the word FEA-
2
CH
6
4:3
TURES is highlighted.
CH
9
7
Press the CURSOR RIGHT ᮣ
A/CH
CC
VOL
VOL
button to display the FEATURES
3
6
5
STATUS
EXIT
menu options (SmartLock or
1
Format).
MENU
OR
Press the CURSOR DOWN ▼
SLEEP
MUTE
button until the word FORMAT
4
5
Features
SmartLock
Format
3
5
is highlighted.
SURF
SMART
Expand 4:3
PICTURE SOUND
2
4
Press the CURSOR RIGHT ᮣ
or CURSOR LEFT ᮤ buttons
to select one of the two options 4:3
or Expand 4:3.
4:3 - Standard format for the TV.
Expand 4:3 - Enlarges the picture
to fill out the entire screen area,
eliminating the “letter box” effect.
MAGNAVOX
When finished, press the STA-
TUS/EXIT button to remove the
6
menu from the TV’s screen.
Note: The Expand 4:3 format can also
be activated using the CURSOR UP ▲
or DOWN ▼ buttons when the
onscreen menu is not being displayed.
Pressing these buttons will toggle the
standard 4:3 format and the Expand 4:3
format.
4:3
Expand 4:3
Some models refer to SmartLock as
AutoLock in the on-screen menu.
These features are the same.
Download from Www.Somanuals.com. All Manuals Search And Download.
UNDERSTANDING THE SMARTLOCK™ CONTROLS
14
he SmartLock™ feature is an integrated cir- MOVIE RATINGS Continued
Tcuit that receives and processes data sent by
R: Restricted - This is programming is specifi-
broadcasters, or other program providers, that
contain program content advisories. When pro-
grammed by the viewer, a TV with SmartLock™
can respond to the content advisories and block
program content that may be found objection-
able (such as offensive language, violence, sexual
situations, etc.). This is a great feature to censor
the type of viewing children may watch.
cally designed for adults. Anyone under the
age of 17 should only view this programming
with an accompanying parent or adult guardian.
NC-17: No one under the age of 17 will
be admitted. - This type of programming
should be viewed by adults only.
X: Adults Only - This type of programming
contains one or more of the following: very
graphic violence, very graphic and explicit or
indecent sexual acts, very coarse and intensely
suggestive language.
SmartLock™ offers various BLOCK-
ING controls from which to choose:
Access Code - An Access Code must be
set to prevent children from unblocking
questionable or censored programming set
by their parents.
TV RATINGS
TV-Y -- Designed for a very young audience,
including children ages 2-6.
Channel Block - After an access code has
been programmed, you can block individual
channels including the A/V inputs.
TV-Y7 -- It may be appropriate for children
age 7 and above who have acquired the devel-
opment skills needed to distinguish between
make-believe and reality.
TV-G -- Suitable for most audiences, this type
of programming contains little or no violence,
no strong language, and little or no sexual dia-
logue or situations.
TV-PG -- This program contains material
that parents may find unsuitable for younger
children. Could contain Moderate violence (V),
some sexual situations (S), infrequent coarse
language (L), or some suggestive dialogue (D).
Clear All - Allows you clear all channels
being blocked from your viewing set with
the Channel Block Control.
Block All - Allows you to block ALL chan-
nels and A/V inputs at one time.
Movie Ratings - Certain blocking options
exist which will block programming based on
ratings patterned by the Motion Pictures
Association of America.
TV Ratings - Just like the Movie Ratings,
programs can be blocked from viewing using
standard TV ratings set by TV broadcasters.
TV-14 -- This program contains some materi-
al that many parents would find unsuitable for
children under 14 years of age. This type of
programming contains one or more of the fol-
lowing: intense violence (V), intense sexual sit-
uations (S), strong coarse language (L), or
intensely suggestive dialogue (D).
MOVIE RATINGS
G: General Audience - All ages admitted.
Most parents would find this program suit-
able for all ages.
PG: Parental Guidance Suggested - This
programming contains material that parents
may find unsuitable for younger children.
PG-13: Parents Strongly Cautioned - This
programming contains material that parents
may find unsuitable for children under the age
of 13.
TV-MA -- This program is specifically
designed to be viewed by adults and therefore
may be unsuitable for children under 17. This
type of programming contains one or more of
the following: graphic violence (V), explicit sex-
ual situations (S), or crude indecent language
(L).
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP A SMARTLOCK™ ACCESS CODE
15
ver the next few panels you’ll learn how
Oto block channels and get a better
understanding of the rating terms for certain
programming.
Main
Picture
Sound
Features
Install
Features
SmartLock
Format
Timer
SmartLock
Format
Start Time
Stop Time
Channel
Activate
Display
First, let’s start by learning how to set a per-
sonal access code:
Press the MENU button on the
remote to show the on-screen
menu.
1
Features
SmartLock
Format
Features
SmartLock
Format
Access Code
- - - -
Access Code
XXXX
Press the CURSOR UP
5
or
DOWN
▼
buttons until the word
2
3
4
5
6
FEATURES is highlighted.
Press the CURSOR RIGHT 3
button to display the FEATURES
menu options.
Features
SmartLock
Format
Features
SmartLock
Format
Access Code
XXXX
Incorrect
New Code
- - - -
Press the CURSOR UP
5
or
DOWN
▼
buttons until the
words SmartLock™ are highlighted.
Press the CURSOR RIGHT 3
button. The screen will read,
“ACCESS CODE - - - - .”
Using the NUMBERED buttons,
enter 0, 7, 1, 1. “XXXX”
appears on the Access Code screen
as you press the numbered buttons.
“INCORRECT CODE” will
appear on the screen, and you will
need to enter 0, 7, 1, 1 again.
The screen will ask you to enter a
“New Code.” Enter a “new” 4
digit code using the NUM-
BERED buttons. The screen will
then ask you to CONFIRM the code
you just entered. Enter your new
code again. “XXXX” will appear
when you enter your new code and
then display the SmartLock™ menu
options.
Features
SmartLock
Format
SmartLock
Block Channel
Setup Code
Clear All
Block All
Movie Rating
TV Rating
Confirm Code
XXXX
OffStop Time
Channel
Activate
Display
PO
1
4
2
5
8
0
3
6
CH
2
6
7
7
CH
7
9
A/CH
CC
VO
4
STATUS
EXIT
VOL
1
MENU
SLEEP
MUTE
3
5
SURF
SMART
PICTURE SOUND
Proceed to the next panel to learn more...
2
4
Some models refer to SmartLock as
AutoLock in the on-screen menu.
These features are the same.
MAGNAVOX
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO BLOCK CHANNELS
16
fter your personal access code has been
Aset (see previous page), you are now
ready to select the channels or the A/V
Inputs you want to block out or censor.
Once you’ve entered your access code and
the SmartLock™ features are displayed on
the screen:
SmartLock
Block Channel OffStop Time
Setup Code
Clear All
Block All
Channel
Activate
Display
Movie Rating
TV Rating
Press the CURSOR UP 5or
DOWN ▼ buttons until the
1
words BLOCK CHANNELS are
highlighted.
Block Channel On
Press the CURSOR RIGHT 3
button to turn blocking ON or
2
OFF for that channel. When ON is
selected the channel will be
blocked.
Enter your
Access Code to
view a tuned
channel that is
blocked with
Block Channel.
Channel 12
Blocked By SmartLock
Channel Blocking
Access Code
- - - -
Press the CH + or CH – button
to select other channels you wish
to block. Repeat step 2 to block
the new channel.
3
POWER
1
4
2
5
8
0
3
6
When finished, press the STA-
CH
TUS/EXIT button to remove the
menu from the screen.
4
CH
9
H
CC
VOL
VOL
1
NOTE: If you ever forget your code,
the 0, 7, 1, 1 code is the factory default
and can be used to enter and create a
new access code.
STATUS
3
2
EXIT
4
MENU
SLEEP
MUTE
SURF
SMART
1
PICTURE SOUND
Some models refer to SmartLock as
AutoLock in the on-screen menu.
These features are the same.
MAGNAVOX
Download from Www.Somanuals.com. All Manuals Search And Download.
BLOCKING OR CLEARING ALL CHANNELS AT THE SAME TIME
17
fter blocking specific channels there
Amay come a time when you want to
block or clear all the channels at the same
time.
Once you’ve entered your access code and
the SmartLock™ features are displayed on
the screen:
SmartLock
Block Channel
Setup Code
Clear All
Block All
Movie Rating
TV Rating
Clear ?Stop Time
Channel
Activate
Display
Press the CURSOR UP 5or
DOWN ▼ buttons to select
1
Cleared
Clear All
either CLEAR ALL or BLOCK ALL.
If CLEAR ALL is selected,
SmartLock
Block Channel
Setup Code
Clear All
press the CURSOR RIGHT 3
2
button to clear all blocked chan-
nels. All channels will be viewable.
Block All
Movie Rating
TV Rating
Off
If BLOCK ALL is selected,
press the CURSOR RIGHT 3
button to turn the control ON or
OFF. When ON is selected, ALL
available channels will be blocked
from viewing.
Block All
On
When finished, press the STA-
TUS/EXIT button to remove the
menu from the screen.
POWER
1
4
2
5
8
0
3
6
3
CH
7
9
A/CH
CC
1
NOTE: If you ever forget your code,
the 0, 7, 1, 1 code is the factory default
and can be used to enter and create a
new access code.
VOL
STATUS
EXIT
3
MENU
SLEEP
MUTE
2
SURF
SMART
1
PICTURE SOUND
Some models refer to SmartLock as
AutoLock in the on-screen menu.
These features are the same.
MAGNAVOX
Download from Www.Somanuals.com. All Manuals Search And Download.
BLOCKING PROGRAMS BASED ON MOVIE RATINGS
18
he SmartLock™ feature can block pro-
Tgramming based on the Movie Industry rat-
ings.
SmartLock
Block Channel
Setup Code
Clear All
Once you’ve entered your access code and the
SmartLock™ features are displayed on the
screen:
G
PG
PG-13
R
Block All
Movie Rating
TV Rating
NC-17
X
Press the CURSOR UP 5or
DOWN ▼ buttons to highlight the
1
words MOVIE RATING.
Press the CURSOR RIGHT 3
button to display the MOVIE RAT-
2
Movie Rating
ING options (G, PG, PG-13, R,
NC17, or X).
G
Off
PG
PG-13
R
NC-17
X
Press the CURSOR UP 5or
DOWN ▼ buttons to highlight any
3
of the Movie Rating options. When
highlighted, all these options can be
turned ON (which will allow blocking)
or OFF (which will allow viewing).
G
On
Use the CURSOR RIGHT 3 but-
ton on the remote to turn the rating
4
option ON or OFF.
POWER
1
4
2
5
8
0
3
CH
C
6
When a rating level is chosen to be
blocked, any higher level rating will also be
blocked from viewing. (i.e.: If “R” is select-
ed to be blocked, NC-17 and X will auto-
matically be blocked.)
1
7
9
A/CH
CC
VO
3
OL
STATUS
EXIT
MENU
SLEEP
MUTE
NOTE: If you ever forget your code, the
0, 7, 1, 1 code is the factory default and
can be used to enter and create a new
access code.
2
4
SURF
SMART
1
3
PICTURE SOUND
Some models refer to SmartLock as
AutoLock in the on-screen menu.
These features are the same.
MAGNAVOX
Download from Www.Somanuals.com. All Manuals Search And Download.
BLOCKING PROGRAMS BASED ON TV RATINGS
19
he SmartLock™ feature can block pro-
Tgramming based on the TV Industry rat-
TV Rating
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
ings.
Off
Once you’ve entered your access code and the
SmartLock™ features are displayed on the
screen:
Press the CURSOR UP 5or
DOWN ▼ buttons to highlight the
1
words TV RATING.
Press the CURSOR RIGHT 3
button to display the TV RATING
2
options (TV-Y, TV-Y7, TV-G, TV-
PG, TV-14, or TV-MA).
On
TV-Y
Press the CURSOR UP 5or
Block All, FV
TV-Y7
TV-G
DOWN ▼ buttons to highlight any
3
of the TV Rating options. When high-
lighted, all these options can be turned
ON (which will allow blocking) or OFF
(which will allow viewing).
Off
Block All, V, S, L, D
TV-PG
TV-14
NOTE: Some TV RATING options also
have sub-ratings. The ratings of TV-Y7, TV-
PG, TV-14, TV-MA can be customized to
block V (violence), FV (fantasy violence), S
(sexual situations), L (coarse language), or D
(suggestive dialogue).
Block All, V, S, L, D
Block All, V, S, L
TV-MA
1
1
4
2
5
8
0
3
6
Press the CURSOR RIGHT 3
button on the remote to turn the TV-
4
3
Y or TV-G rating ON or OFF. Or,
7
9
press the CURSOR RIGHT 3
button to enter the sub-menus for the
TV-Y7, TV-PG, TV-14 or TV-MA rat-
ings.
1
3
5
A/CH
CC
5
VOL
STATUS
EXIT
MENU
2
If the TV-Y7, TV-PG, TV-14 or TV-MA
sub-menu is accessed, press the
LEEP
MUTE
5
CURSOR UP 5or DOWN ▼
4
SURF
SMART
buttons to select one of the options
(Block All, V, S, L, D, or FV).
PICTURE SOUND
6
Press the CURSOR RIGHT 3
button on the remote to turn the
6
option ON or OFF.
Some models refer to SmartLock as
AutoLock in the on-screen menu.
These features are the same.
MAGNAVOX
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER SMARTLOCK™ BLOCKING OPTIONS
20
martLock™ offers the viewer other
Sblocking features as well. With these
Blocking Options, the censoring can be
turned ON or OFF.
Once you’ve entered your access code and
the SmartLock™ features are displayed on
the screen:
SmartLock
Setup Code
Clear All
Block All
Movie Rating
TV Rating
Block Options
Press the CURSOR UP 5or
DOWN ▼ buttons until the
1
words BLOCKING OPTIONS
are highlighted.
Press the CURSOR RIGHT 3
button to display the Blocking
2
On
On
On
Blocking
Options (BLOCKING, UNRAT-
ED, or NO RATING) menu.
Unrated
BLOCKING: Might be called the “mas-
ter switch” for SmartLock™. When ON,
ALL blocking/censoring will take place.
When OFF, ALL blocking is disabled.
No Rating
UNRATED: ALL unrated programs
based on the Movie Ratings or Parental
(TV) Guidelines can be blocked if this fea-
ture is set to ON and the BLOCKING
feature is set to OFF.
POWER
1
2
5
8
0
3
6
CH
CH
4
1
7
9
NO RATING: ALL programming with
NO content advisory data can be
blocked if set to ON and the BLOCK-
ING feature is set to OFF.
A/CH
CC
VO
3
OL
STATUS
EXIT
4
MENU
Press the CURSOR UP 5or
SLEEP
MUTE
DOWN ▼ buttons to highlight
3
2
4
the desired feature.
SURF
SMART
1
3
PICTURE SOUND
When highlighted, each feature can
be turned ON or OFF using the
4
CURSOR RIGHT 3or LEFT
2 buttons on the remote.
Some models refer to SmartLock as
AutoLock in the on-screen menu.
These features are the same.
MAGNAVOX
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE CLOSED CAPTION CONTROLS
21
losed Captioning (CC) allows you to
Cread the voice content of television pro-
grams on the TV screen. Designed to help
the hearing impaired, this feature uses on-
screen “text boxes” to show dialogue and
conversations while the TV program is in
progress.
Press the CC button on the
remote to display the current Closed
CC Off
1
2
Caption setting.
Press the CC button repeatedly
to choose from the four Closed
Caption options (CC Off, CC1,
CC2, or CC Mute). CC Mute will
activate Closed Captioning when the
MUTE button is pressed.
CC Off
CC1
POWER
CH
1
4
2
5
8
0
3
6
When finished, press the STA-
CH
7
9
TUS /EXIT button to remove the
3
A/CH
CC
VOL
VOL
CC2
menu from the TV’s screen.
3
STATUS
EXIT
CC Mute
MENU
1
2
SLEEP
MUTE
SURF
SMART
PICTURE SOUND
HELPFUL HINT
MAGNAVOX
Not all TV programs and prod-
uct commercials are made with
Closed Caption (CC) information
included. Neither are all Closed
Caption modes (CC1, or CC2) nec-
essarily being used during the trans-
mission of a closed caption program.
Refer to your area's TV program list-
ings for the stations and times of
Closed Caption shows.
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE SLEEPTIMER CONTROL
22
our TV can be set to automatically turn
Yitself off at a given amount of time.
Press the SLEEP button on the
remote control and the SLEEP
1
timer display will appear on the
screen.
Sleep 15
Press the SLEEP button repeat-
edly to pick the amount of time
2
(15, 30, 45, 60, 90, 120, 180, or 240
minutes) before the TV will turn
itself off.
Sleep 15
Sleep 30
Sleep 45
Sleep 60
Sleep 90
Sleep 120
Sleep 180
Sleep 240
Sleep off
NOTE: An on-screen count down will
appear during the last minute before the
TV shuts itself off. If any button is
pressed during the last minute of the
countdown, the Sleeptimer setting will
be cancelled.
POWER
1
4
2
5
8
0
3
CH
6
CH
7
9
A/CH
CC
VOL
VOL
STATUS
EXIT
1
2
MENU
SLEEP
MUTE
SURF
SMART
PICTURE SOUND
During the last 10
seconds of a
Sleeptimer setting,
an on-screen dis-
play will read
During the last minute
of a Sleeptimer setting,
an on-screen count
down will be displayed.
Pressing any button dur-
ing the last minute will
cancel the Sleeptimer.
MAGNAVOX
GOOD BYE.
Good Bye
9 Sec
45 Sec
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE SMARTPICTURE™ CONTROL
23
hether you’re watching a movie or a
Wsporting event, your TV has automat-
ic video control settings matched for your
current program source or content.
Press the SMART PICTURE
button on the remote control. The
current Smart Picture setting will be
displayed on the screen.
1
Personal
Press the SMART PICTURE
button repeatedly to select either
2
PERSONAL, MOVIES, SPORTS,
WEAK SIGNAL, or MULTIMEDIA
picture settings.
POWER
1
4
2
5
8
0
3
6
Movies
Sports
CH
NOTE: The way you choose to set the
Picture Menu Controls will become your
PERSONAL setting.
CH
7
9
A/CH
CC
VOL
VOL
Weak Signal
Multimedia
STATUS
EXIT
MENU
1
2
SLEEP
MUTE
SURF
SMART
PICTURE SOUND
MAGNAVOX
MOVIES - Preset picture
options for watching
Video Tapes, or DVDs.
SPORTS - Preset pic-
ture options for watching
sporting events.
WEAK SIGNAL -
Preset picture options for
watching programs where
the reception is not at its
best.
MULTIMEDIA - Preset
picture options for use
with video gaming.
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE SMARTSOUND™ CONTROL
24
he Smart Sound feature allows the lis-
Ttener to select between four different
factory set sound options.
Press the SMART SOUND but-
ton on the remote control. The cur-
rent Smart Sound setting will appear
in the middle of the screen.
1
Personal
Press the SMART SOUND but-
ton repeatedly to toggle between
the four settings. (PERSONAL,
VOICE, MUSIC, or THEATRE)
2
POWER
CH
1
4
2
5
8
0
3
6
Theatre
Music
Voice
NOTE: The way you choose to set the
Sound Menu Controls will become your
PERSONAL setting.
CH
7
9
A/CH
CC
VOL
VOL
STATUS
EXIT
MENU
1
2
SLEEP
MUTE
SURF
SMART
PICTURE SOUND
MAGNAVOX
THEATRE - Preset
sound options for watch-
ing movies.
MUSIC - Preset sound
options for musical pro-
gramming where there is
little or no dialogue.
VOICE - Preset sound
options for programming
where heavy dialogue is
present.
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE SMARTSURF™ CONTROL
25
martSurf lets you set up to eight chan-
Snels in a quick viewing list. Then, you
can use the SURF button on the remote
control to switch between different TV pro-
grams that currently interest you.
10
Surf
10
Add
Press CH +/– or the Number
buttons to select a channel to add
to the SURF list.
1
Surf List Empty
10
Surf
10
Delete
Press SURF while the channel
number appears.
POWER
CH
1
4
2
5
8
0
3
6
2
3
CH
7
9
Press 3 or 2 to add the chan-
nel to the SURF list or delete
A/CH
CC
VOL
VOL
STATUS
EXIT
it from the list. An on-screen
message will indicate whether you
are adding or deleting the channel.
Repeat steps 1 through 3 to add
additional channels (up to eight) to
the SURF list.
MENU
12
SLEEP
MUTE
SURF
SMART
12
Surf
PICTURE SOUND
10
12
4
Add
MAGNAVOX
12
Surf
10
12
4
Delete
Press SURF repeatedly
during TV viewing to scan
through the channels in
the SURF list.
Download from Www.Somanuals.com. All Manuals Search And Download.
ALTERNATE CHANNEL
26
our remote control has an Alternate
YChannel button that allows you to toggle
between the current and previous channel.
For instance, if you are watching two games
on TV, you can enter the channel numbers
once and flip between the two channels
with the touch of only one button.
After entering the two channels numbers,
so that one is the last viewed channel and
the other is the current channel, follow the
step below.
POWER
CH
1
4
2
5
8
0
3
6
CH
7
9
A/CH
CC
VOL
VOL
Press the A/CH button on the
STATUS
EXIT
remote control. The channels will
toggle between the current channel
and the last viewed channel.
1
MENU
SLEEP
MUTE
SURF
SMART
PICTURE SOUND
MAGNAVOX
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
27
No Power
Remote Does Not Work
•Check the TV power cord. Unplug the TV,
wait 10 seconds, then reinsert the plug into
the outlet and push the POWER button
again.
•Check that the outlet is not on a wall
switch.
•Check the batteries. If necessary, replace
them with 2 AA Heavy Duty (Zinc
Chloride) or Alkaline batteries.
•Clean the remote control and the remote
control sensor window on the TV.
•Check the TV power cord. Unplug the
TV, wait 10 seconds, then reinsert the
plug into the outlet and push the POWER
button again.
•Be sure the fuse is not blown on the AC
power strip, if one is being used.
No Picture
•Be sure the fuse is not blown on the AC
power strip, if one is being used.
•Check to be sure the TV outlet is not on
a wall switch.
TV Displays Wrong Channel or No
Channels Above 13
•Repeat channel selection.
•Check antenna connections. Are they
properly secured to the TV's ANT 75Ω
plug?
•Check the TUNER MODE control for the
correct tuner setting.
•Try running the Auto Program feature to
find all available channels.
•Press the CH+ or CH- buttons on the
remote to make sure the correct signal
source is selected (FRONT or Current
Channel).
•Add the desired channel numbers (using
the CHANNEL EDIT control) into the
TV’s memory.
•Check to be sure the TUNER MODES are
set to the CABLE option and run the Auto
Program feature to find all available chan-
nels.
Sound
No
•Check the VOLUME buttons.
•Check the MUTE button on the remote
control.
•If you’re attempting to hook up auxiliary
equipment, check the audio jack connec-
tions located on the front of the TV.
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE AND CLEANING
28
WARNING Concerning Stationary
Images on the TV Screen:
PLACEMENT OF THE TV
• To avoid cabinet warping, cabinet color
changes, and increased chance of set
failure, do not place the TV where tem-
peratures can become excessively hot;
for example, in direct sunlight or near a
heating appliance.
Do not leave stationary or letterbox
images on screen for extended peri-
ods of time. This can cause uneven
picture-tube aging.
Normal use of the TV should involve the
showing of pictures that contain constantly
moving and changing images that fill the
screen. Be careful not to leave nonmoving
images on screen for extended periods of
time, or to display the same images on
screen too frequently, because subtle
ghost images can be left on the picture
tubes. Sources of stationary images may
be DVD disks, laser disks, video games,
CD-i disks, videotapes, digital television
boxes, broadcast channels, cable channels,
satellite channels, and others. Here are
some examples of stationary images
(this is not an all-inclusive list; you
may encounter others in your view-
ing):
• Be sure to allow a free flow of air to
and from the perforated back cover of
the set.
CLEANING
• To avoid possible shock hazard, be sure
the TV is unplugged from the electrical
outlet before cleaning.
• Regularly dust the TV with a dry, non-
scratching duster to keep the TV clean.
• When cleaning the TV, take care not to
scratch or damage the screen surface.
Avoid wearing jewelry or using anything
abrasive. Do not use household clean-
ers. Wipe the front screen with a clean
cloth dampened with water. Use even,
easy, vertical strokes when cleaning.
• Gently wipe the cabinet surfaces with a
clean cloth or sponge dampened in a
solution of cool, clear water and a mild
soap or detergent. Use a clean, dry
cloth to dry the wiped surfaces.
• DVD menus—listings of DVD disk
content
• Letterbox black bars—shown at the
top and bottom of the TV screen when
a wide screen (16:9) movie is viewed
on a TV with standard (4:3) aspect
ratio.
• Occasionally vacuum the ventilation
holes or slots in the back cover of the
set.
• Video-game images and score-
boards
• Television station logos—present a
problem if they are bright and station-
ary; moving or low-contrast graphics
are less likely to cause uneven aging of
the picture tube
• Never use thinners, insecticide sprays,
or other chemicals on or near the cabi-
net, as they might cause permanent
marring of the cabinet finish.
• Stock-market tickers—presented at
the bottom of the TV screen
• Shopping channel logos and pric-
ing displays—bright and shown con-
stantly or repeatedly in the same loca-
tion on the TV screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
GLOSSARY
29
Auto Programming • The procedure of
adding or deleting channel numbers into
the Television’s memory circuits. In this
format the Television “remembers’’ only
the locally available or desired channel
numbers and skips over any unwanted
channel numbers.
Remote Sensor Window • A window
or opening found on the Television con-
trol panel through which infrared remote
control command signals are received.
Status/Exit • Allows the user to quickly
confirm what channel number is currently
being viewed. Status can also be used to
clear the Television of on screen displays
or information (rather than waiting for the
displays to “time out” or automatically dis-
appear from the screen).
Coaxial Cable • A single solid antenna
wire normally matched with a metal plug
(F-type) end connector that screws (or
pushes) directly onto a 75 Ohm input
found on the Television or VCR.
Surf • The action of scanning specific
channel in a limited channel list.
Closed Caption • Broadcast standard
which allows you to read the voice con-
tent of television programs on the TV
screen. Designed to help the hearing
impaired this feature uses on-screen "text
boxes" to show dialogue and conversa-
tions while the TV program is in progress.
Twin Lead Wire • The more commonly
used name for the two strand 300 Ohm
antenna wire used with many indoor and
outdoor antenna systems. In many cases
this type of antenna wire requires an addi-
tional adapter (or balun) in order to con-
nect to the 75 Ohm Input terminals
designed into the more recent Televisions
and VCRs.
Side Audio/Video Inputs • Located on
the side of the TV these connectors
(phono type plug) are used for the input
of audio and video signals. Designed for
easy use with VCRs or cameras.
Tuner Mode • Feature control settings
made by the TV. Designed for first time
set up and use. Settings for signal connec-
On Screen Displays (OSD) • Refers to
the wording or messages generated by the tions (antenna or cable TV), plus channel
television (or VCR) to help the user with program memory are held in the TV's
specific feature controls (color adjustment, memory (even if the set is unplugged and
programming, etc.).
moved to a new location.)
Menu • An on-screen listing of feature
controls shown on the Television screen
that are made available for user adjust-
ments.
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
30
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
31
Download from Www.Somanuals.com. All Manuals Search And Download.
MAGNAVOX LIMITED WARRANTY
Ninety (90) Days Labor & One (1) Year Parts & One (1) Year Display
MAGNAVOX warrants this product against
defect in material or workmanship, subject to
any conditions set forth as follows:
•
A product that requires modification or
adaptation to enable it to operate in any
country other than the country for which
it was designed, manufactured, approved
and/or authorized, or repair of products
damaged by these modifications.
PROOF OF PURCHASE:
You must have proof of the date of purchase
to receive warranted repair on the product.
A sales receipt or other document showing
the product and the date that you purchased
the product as well as the authorized retailer
included, is considered such proof.
•
Damage occurring to product during ship-
ping when improperly packaged or cost of
associated packaging.
•
•
Product lost in shipment and no signature
verification of receipt can be provided.
A product used for commercial or institu-
tional purposes (including but not limited
to rental purposes).
COVERAGE:
(If this product is determined to be defective)
LABOR: For a period of ninety (90) days
from the date of purchase, Magnavox will
repair or replace the product, at its option, at
no charge, or pay the labor charges to any
Magnavox authorized service center. After
the period of ninety (90) days, Magnavox will
no longer be responsible for charges
incurred.
•
Products sold AS IS or RENEWED.
TO OBTAIN WARRANTY SERVICE
IN THE U.S.A., PUERTO RICO, OR
U.S. VIRGIN ISLANDS…
Contact Magnavox Customer Care Center
at:
PARTS: For a period of one (1) year,
Magnavox will supply, at no charge, new or
rebuilt replacement parts in exchange for
defective parts. Magnavox authorized service
centers will provide removal and installation
of the parts under the specified labor warran-
ty.
1-800-705-2000
TO OBTAIN WARRANTY SERVICE
IN CANADA…
1-800-661-6162 (French Speaking)
1-800-705-2000 (English or Spanish
Speaking)
REPAIR OR REPLACEMENT AS PROVIDED
UNDER THIS WARRANTY IS THE EXCLU-
DISPLAY: For a period of one (1) year from
the date of purchase, Magnavox will supply, at SIVE REMEDY FOR THE CONSUMER.
no charge, a new or rebuilt active display
device in exchange for the defective display.
Magnavox authorized service centers will
provide removal and installation of the parts
under the specified labor warranty. (PTV
screens carry a thirty (30) day replacement
warranty.)
MAGNAVOX SHALL NOT BE LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES FOR BREACH OF ANY
EXPRESS OR IMPLIED WARRANTY ON
THIS PRODUCT. EXCEPT TO THE
EXTENT PROHIBITED BY APPLICABLE
LAW, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE ON THIS PROD-
UCT IS LIMITED IN DURATION TO THE
DURATION OF THIS WARRANTY.
EXCLUDED FROM WARRANTY
COVERAGE
Your warranty does not cover:
•
Labor charges for installation or setup of
the product, adjustment of customer con-
trols on the product, and installation or
repair of antenna systems outside of the
product.
Some states do not allow the exclusions or
limitation of incidental or consequential dam-
ages, or allow limitations on how long an
implied warranty lasts, so the above limita-
tions or exclusions may not apply to you. In
addition, if you enter into a service contract
agreement with the MAGNAVOX partner-
ship within ninety (90) days of the date of
sale, the limitation on how long an implied
warranty lasts does not apply.
•
Product repair and/or part replacement
because of improper installation, connec-
tions to improper voltage supply, abuse,
neglect, misuse, accident, unauthorized
repair or other cause not within the con-
trol of Magnavox.
This warranty gives you specific legal rights. You may have other rights which vary from state/province to
state/province.
Magnavox, P.O. Box 671539, Marietta, GA. 30006-0026
(Warranty: 4835 710 28125)
Download from Www.Somanuals.com. All Manuals Search And Download.
|