3
2
SETUP MANUAL
Problem
Tip
HDMI
Turn On the BD using its
Remote Conttrol. Please
No power.
• Check the AC power cord, if it is properly connected.
• Unplug the AC power cord, and wait for about 5-10
seconds. Plug it back in and attempt to Power On the unit.
locate the Source / Input /
AUX /Video button onTV’s
remote control. The button
may vary on theTV brand and
model. Once you have located
the button, press until you see
“PleaseWait...” or the Initial
Setup Menu on theTV Screen.
Please Wait...
Network Settings
Please wait a moment. Please press [RETURN] to
stop this operation.
AV/SOURCE
No sound or picture. • Make sure both theTV and Blu-ray Disc™ player are
Turned On.
State : Setting...
Power Button
• Confirm the connections to theTV are made properly
as shown in CONNECTIONS.
Network Setup
• Check to see whether the connectedTV or another
device supports HDCP. (This unit will not output a
video signal unless the other device supports HDCP.)
Initialization
Language
6 / 7
Please select your language for on-screen
Welcome!
display.
It may take a few minutes.
This unit is ready for initialization. Please
follow the on-screen instructions.
English
Español
Français
Network Settings
MBP5320F
No reaction to the
Remote Control.
• Confirm that the player’s AC power cord is plugged into
a power outlet.
• Check the Batteries in the Remote Control, and make
sure they are inserted properly by + or - symbols.
• Point the Digital or Cell Phone Camera towards the
front of the Remote Control. Press any Arrow key on
the Remote Control and look at the Camera Display.
If a pulsating light appears on the Display the Remote
Control is sending out an IR signal.
Network Selection
Please wait a moment. Please press [RETURN] to
stop this operation.
Next
State : Connecting...
Please select the connection method.
Cancel
Return
Wired
See the Online Owner’s Manual for details:
Wireless
Select your language.
Return
Cancel
6 / 7
1 / 7
It may take a few minutes.
Quick Start Mode
Automatically check for latest software
Step 2 Select Download.
Step 3 Type in the Model # “MBP5320F” and click “Search”.
Step 4 Select the Manual, and click on “Download”.
Network Settings
Would you like to activate the Quick Start Mode?
The unit will start up more quickly, but will consume
more power in standby mode.
Would you like to activate the software update
DNote
feature? When connected to the Internet,
the unit will automatically check for the latest
software.
Some Cameras have an IR Filter and will not display
the IR signal.
Home Network
Internet
:
:
Pass
Pass
On
Off
On
Off
Network Settings
Network connection succeeds.
No high-definition
video signal on the
TV screen.
• Does the Disc contain high-definitionVideo and theTV
support it? High-definitionVideo is only available when
the Disc contains it and theTV supports it.
Return
Return
Select whether to set the IP address and other
settings automatically or manually.
MAGNAVOX is a registered trademark of Philips North America Corporation
and is used by Funai Electric Co., Ltd. and Funai Corporation, Inc. under
license from Philips North America.
End
Auto
7 / 7
Manual
Distorted picture.
• Sometimes a small amount of picture distortion may
appear. This is not a malfunction.
Return
Cancel
Network Selection
No sound or
distorted sound.
• Adjust the volume.
• Check the HDMI and AUDIO connections as necessary.
• Make sure the HDMI cable is not plugged into an HDMI-
DVI adapter which does not handle Digital sound.
• Check the settings in “Audio Out” menu.
If you select “Wired”,
please go to in step
4 / 7
Please select the connection method.
.
.
3
Wired
Wireless
If you select “Wireless”,
please go to in step
Return
Cancel
© 2013 Funai Electric Co., Ltd.
Printed in China
4
1 / 7
Cannot play back a
disc.
• Make sure that the product supports the disc.
• Check the region code of the disc. This unit supports
the following region codes.
ECD0AUH
2VMN00063
Network Setup
★★★★★
*
2
V
M
N
0
0
0
6
3
*
Blu-ray Disc™: “A”
DVD: “ALL” or “1”
• Clean the disc.
1
4
Cannot connect to
the network.
• Check to see if the modem / router has Power turned
On.
• Confirm, if the Internet light is showing activity (light
blinking) on the modem / router.
• Check network settings on the unit. Please refer to
Online Owner’s Manual.
• Power cycle the modem’s and/or router’s AC plug from
its AC outlet for 30 seconds, and then plug it back in.
Then, try reconnecting cords. If you have a telephone /
Internet modem with your cable service, then you may
have to use its reset button or remove the backup
battery to reset this type of modem. Now wait for the
lights to show activity and try reconnecting.
Connection to aTV
Access Point Setting
Access Point Setting
Please input the WEP/WPA key with software keyboard.
Network Selection
Auto
Scan
Please select the access point.
Please select the setting mode.
Wireless Access Point A
Wireless Access Point B
Wireless Access Point C
Wireless Access Point D
Wireless Access Point E
Wireless Access Point F
Auto Scan
Manual
Easy Connect (WPS)
Retry
Return
Cancel
Return
Cancel
AC plug
Done
Return
Clear
Network Setup
3 / 7
3 / 7
2 / 7
Enter the security key to your
wireless router. Key content is case-sensitive.
Network Selection
Access Point Setting
Network Settings
• Check the cable connections to the router.
• If none of above solves trouble, please contact your ISP
(Internet Service Provider) for further assistance.
Select whether to set the IP address and other
settings automatically or manually.
Please confirm the setting.
Please select the connection method.
From here on, the headers will show
“Access Point Setting” when using
“Easy Connect (WPS)” setup.
It may take a few moments.
SSID
:
:
:
Wireless Access Point A
WPA-PSK (AES)
Wired
Auto
LAN
HDMI OUT
Wireless
Security
Manual
Next
Retry
Cannot use the
wireless connection.
• Once you have activated the wireless connection, please
wait 30 seconds for the connection to be established
afterTurning On the unit, before trying to access
network features such as BD-Live™, DLNA home
network server and the third-party network services.
Return
Cancel
WEP/WPA Key
xxxxxxxxxxxx
xxxxxxxxxx
Return
Cancel
HDMI cable
(not supplied)
Return
Cancel
Network Settings
1 / 7
4 / 7
3 / 7
Home Network
Internet
:
:
Pass
Pass
If your router has a PBC*
Easy
Connect
• If
appears in the upper left corner of the Home
Network Settings
Access Point Setting
Push Button Method
(
)
Push Button Configuration
Network connection succeeds.
Wired andWireless Connections
Menu screen, this unit is connected to an Access Point.
Please contact your ISP for further assistance when you
cannot access BD-Live™ or network services.
(
)
WPS
button, you can use
Please select the setting mode.
End
Please push the PBC (push button configuration) on the wireless router
and select ‘Push Button Method’ button on screen.
“Push Button Method”
which is the easiest way to
Wireless
Auto Scan
Wireless Connection
7 / 7
Manual
broadband router
PIN Code Method
Easy Connect (WPS)
Please select ‘PIN Code Method’ button on screen.
If “Home Network” passed,
but “Internet” failed, please
contact your Internet service
provider for troubleshooting assistance.
set up a wireless connection.
If your router does not have it,
please use the “Auto Scan” setup.
Return
Cancel
Return
Cancel
If you do not find a solution above, please visit our website
for the Online Owner’s Manual
2 / 7
2 / 7
Please download it and then refer to “TROUBLESHOOTING” section
for more information. If additional support is required, please contact
our Customer Service at 1-800-605-8610.
Active Internet connection is required to your
[
]
Please push the PBC button on your Wireless Router, then quickly click OK on “Push Button Method”.
If setup fails using “Easy Connect (WPS)”,
please select “Auto Scan” or “Manual” mode.
*
PBC button may be called WPS
button on your wireless router.
modem or broadband router. If there is trouble
connecting to the Internet, refer to the relevant
topics inTROUBLESHOOTING.
Internet
or
When the unit has successfully been connected to an access point,
D
• If you are experiencing signal
issues with your wireless
connection, please confirm that
your wireless router is placed
close enough to the unit.
appears in the upper left corner of the Home Menu screen.
Wired Connection
• If this unit becomes inoperative, do not try to correct the problem
by yourself. There are no user-serviceable parts inside. Eject the
disc (if possible), disconnect the USB Memory Stick (if connected),
place the unit into Standby mode, unplug the Power plug, and then
* This icon does not necessarily mean that this unit is connected to the Internet.
Modem or
Router
LAN
HDMI OUT
Wireless network setting is completed.
You are ready to enjoy network features over WiFi!
LAN cable (not supplied)
Network Setup
please visit:
or contact: 1-800-605-8610
ECD0AUH_MBP5320F_SU.indd 1
2013/06/20 13:27:48
Download from Www.Somanuals.com. All Manuals Search And Download.
|