Installation and
Operations Manual
MODE
EJECT
POWER
SEL
AM/FM/CD RECEIVER
PULL OPEN
4 X 50W
DIMMER
LOUD
VOL
MUTE
CONTROL
VOL
BAND
0
DISP
SCAN
AS/PS
1
2 MEM
3 PGM
4 RPT
5 RDM
6 INT
7
8
9
ELAPSE
SHIFT
M5000CD
Waterproof
AM/FM/WB and CD Stereo Receiver
®
A Registered Trademark of Magnadyne Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Location and Function of Controls at a Glance
8. Multi-Function Button 3/PGM:
Radio: Recalls a memorized radio station, and programs a radio station into memory (See Radio
Operation for more information).
CD: Directly accesses CD track number. Enters CD track program mode (See CD Operation for more
information).
9. Multi-Function Button 4/RPT:
Radio: Recalls a memorized radio station, and programs a radio station into memory (See Radio
Operation for more information).
CD: Directly accesses CD track number. Continuously repeats the same track (See CD Operation for more
information).
10. Multi-Function Button 5/RDM:
Radio: Recalls a memorized radio station, and programs a radio station into memory (See Radio
Operation for more information).
C
D: Directly accesses CD track number
.
Plays all tracks on the current disc in random order (See CD
Operation for more information).
11. Multi-Function Button 6/INT:
Radio: Recalls a memorized radio station, and programs a radio station into memory (See Radio
Operation for more information).
CD: Directly accesses CD track number. Plays the first several seconds of each track on the current
disc (See CD Operation for more information).
12. Band Button: Selects the radio band in the following order: FM1, FM2, AM, WX.
13. Display Button: Displays either the clock or radio station. (See setting the clock for more information).
14. AS/PS Elapse Button:
Radio: Automatic memory storing and preset scan (See Radio Operation for more information).
CD: Displays elapsed time of current CD track.
15. Loud Button: Enhances high frequency and low frequency sound quality.
Dimmer Button: Adjusts the brightness of the LCD display backlight.
16. Eject Button: Ejects the disc from the CD slot when the CD door is open.
17. Mode Button: Changes sequentially through the following sources:
Radio Tuner > CD > CD Changer > Auxiliary > Radio Tuner.
18. Play/Pause and Mute Button:
Radio/Aux In: Mutes audio level.
CD: Starts CD play function or pauses CD play function.
19. Display Area: Displays Radio, CD and Clock functions.
20. Waterproof CD Slot: To access the CD Slot, pull the tab at the top of the door to open.
21. Reset Button: Resets control logic of CPU in the event of a lockup. See General Operations/Reset but-
ton for more details.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Operation
Listening to the Radio
Programming the Radio
You can program up to 20 FM radio stations and 10 AM
radio stations.
1. Push the “POWER” button (1) once to turn the unit on.
2. Press the “BAND” button (12) to select a radio
band: FM1, FM2, AM or WX (weather band).
Manual Station Recall Programming
1. Press the “BAND” button (12) to select a radio
3. AM or FM Station Selection
band: FM1, FM2, or AM.
Automatic Seek Station Selection: Press the 2. Select the desired station.
or
button (5) to automatically seek the
3. Press and hold one of the ten station recall but-
tons (6-11), the button number and "CH" will
appears in the display area. Release the button.
next strong station.
SCAN
Scan Station Selection: Press the
button
4. Repeat the Steps 1-3 to memorize additional sta-
tions as desired.
(4) to automatically scan through strong sta-
tions in the current radio band. The radio will
pause for 5 seconds at each strong station.
Each frequency will flash in the display. Press Automatic Station Store
the scan button again to hold the current station.
1. Press the “BAND” button (12) to select a radio
band: FM1, FM2 or AM.
Manual Station Selection: Press the or
AS/PS
2. Press the
button (14) for more than 2 sec-
button for more than 3 seconds to manually
select stations, and "MAN" will appear in the dis-
play. Use either button to manually seek up and
down the frequency scale.
Note: If either button is not pressed for several
seconds, the unit will return to Automatic Seek
Station selection and "AUTO" will appear in the
display.
onds, the radio will then search the current fre-
quency and check the signal strength until the six
strongest stations are stored into the correspond-
ing preset number button. When completed, the
system will scan the stored stations automatically.
Preset Scan
AS/PS
Press the
button (14) to scan the preset sta-
Weather Band Station Selection (WX)
tions. The radio will hold at that preset number for
several seconds, then will scan again. To stop
scanning when a desired station is reached press
Press the “BAND” button four times to select
WX, then use the or
seek the stations.
button to manually
the
AS/PS
button again.
Sound Controls
Adjusting the Volume, Bass Treble, Balance and
Fader
Adjusting the Audio Beep
Press the
button for more then 2 seconds
1. Press the
button (2) to select the desired
to turn beep On/Off. When the beep is on the
icon will be displayed.
audio mode. The audio modes will be displayed in
the following order: Volume, Bass, Treble,
Balance and Fader.
Adjusting the Loud Feature
Press the LOUD button (15) to increase the bass
and treble output, "LOUD" will then be displayed.
Press the button again to release this function.
2. Press the
sound of the audio mode selected.
or
buttons (5) to adjust the
Initial Volume Level
Mute
To program the Initial Volume Level, adjust the
volume to the desired level, then press the
"POWER" button for more than 3 seconds. The
next time the unit is turned on, the volume will be
at this initial level.
MUTE
In Radio/Aux In mode, press the
mute audio level. Press the button again to
release this function.
button (18)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
General Operations
Setting the Clock
Selecting a Mode
1. Press DISP button (13) for more than 3 seconds
until the clock shown in the display area is flashing.
Press the MODE button (17) to step sequentially
through the following sources: Radio Mode to
Radio Tuner > CD > CD Changer (optional) >
Auxiliary > Radio Tuner.
2. Press the
button to adjust the hours
3. Press the
button to adjust the minutes.
Illumination Dimmer
Display Priority
Clock Display Priority
Press and hold DISP button (13) while pressing
the button to select Clock Priority. Pressing the
DISP button while in Clock Priority will temporari-
ly display selected station frequency.
In CD Mode:
When the display priority is set to "Clock", the
clock will be displayed.
Press LOUD / DIMMER button (15) for more than
2 seconds to adjust the brightness of the LCD
display backlight.
Reset Button (21)
The Reset Button (21) is located behind the CD
Door, and above the CD Slot. Activated the reset
button with either a ballpoint pen tip or paper clip
for the following reasons:
Pressing DISP button will temporarily display CD
track number, time remaining or elapsed time
depending on current CD display option selected.
After 5 seconds the display will return to the clock.
• After initial installation of the unit is com-
pleted.
• When the function buttons do not operate.
• Error symbol in the display.
If there is a disc in the slot when the reset but-
ton is pressed the disc will be ejected.
Frequency Display Priority
Press and hold DISP button while pressing the
button to select Frequency Priority. Pressing
DISP button while in Frequency Priority will tem-
porarily display clock.
In CD Mode:
When the display priority is set to "Frequency",
the CD track number will be displayed.
Pressing the DISP button will temporarily display
the clock. After 5 seconds the display will return
to the CD display.
CD Changer Operation (Optional)
Select a Disc
Notes on CD-Rs and CD-RWs:
• The unit cannot play a CD-R and CD-RW that is
not finalized. (Please refer to the manual of your
CD-R/CD-RW recorder or CD-R/CD-RW software
for more information on the finalizing process).
• This unit will not play MP3 music or WMA music
recorded on any CD-R or CD-RW disc.
• Be sure to only use discs with the following labels
in this unit:
1. Load your CD Changer with compact discs per
the manufacturer's operating instructions.
SCAN
2. Press the
SHIFT button (4) to enter Shift
Mode. “SHIFT” will then appear in the display,
indicating the CD Changer is active.
3. Press the or
button to scroll through the
CDs loaded in the CD Changer. If there isn’t any
operation for several seconds, the unit will exit
Shift Mode automatically.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CD Player Operation
Inserting and Ejecting a Disc
3 PGM
desired order. Then press the
button for
Pull the tab at the top of the CD Door, and the
door will open. Push a disc into the CD Slot (20),
label side up, and the disc will begin to play.
several seconds to play the CD in programmed
order. When you have programmed 32 tracks,
“FULL” will appear in the display.
Press the
EJECT button (16) to stop CD play
and eject the disc. The disc will also eject auto-
matically when the CD Door is opened.
• When the CD is played in programmed order,
3 PGM
press the
button for several seconds, then
press it again for several seconds to exit the PGM
mode.
Select Tracks
Press the
previous track or next track. The track number
appears in the Display Area.
or
button (5) to move to the
• When the CD is playing in programmed order,
2 MEM
pressing the
button for several seconds
will clear all the programmed content and “CLR”
will appear in the display.
• If you don’t press the
Fast Forward and Fast Reverse
2 MEM
button (7) to carry
Press and hold the
or
button to fast for-
3 PGM
out program setting, press the
button (8)
ward or fast reverse. Disc play starts from when
you release the button.
for several seconds, “NO-P” will appear in the
display.
Pause Disc Play
Press the
Direct Track Access
button (18) to pause the CD
While a CD music disc is playing, the station
recall buttons 0 thru 9 can be used to access and
play CD tracks directly (no need to scan or
advance the tracks manually one-by-one to find
the one you want to listen to). If you know the
music track number you want to listen to, press
the station recall button(s) that correspond to the
desired track.
player. Press it again for several seconds to
resume play.
Repeat the Same Track
4 RPT
Press the
button (9) for several seconds to
continuously repeat the same track. Press it again
for several seconds to stop repeat.
Play All Tracks in Random Order
For example, if you are listening to track “1” and
5 RDM
Press the
button (10) for several seconds
3 PGM
you want to hear track “3”, press
button.
to play all tracks on the current disc in random
order. Press it again for several seconds to stop
random play.
“T-03” will be displayed and track 3 will begin to
play.
If the music track you want to listen to has a dou-
1
ble digit number such as “15”, press
then press
and
Intro Scan
Press the
5 RDM
. The display will show “T-15”
6 INT
button (11) for several seconds
and track “15” will begin to play. You can direct
access any track at any time.
Note: If you select a track number that does not
exist on the CD, “NO TR” will be displayed. Select
another track.
to play the first 10 seconds of each track. Press it
again for several seconds to cancel the function
and listen to the track.
Program CD Tracks
Use the Program function to select up to 32 CD
tracks to play in any order. The Program function
allows you to select a track number for each spot
in the playing sequence. A CD must be inserted to
Track/Time Display
To display the running time/remaining time of a
track, press the
AS/PS
ELAPSE button (14).
use the Program function.
3 PGM
1. Press the
button (8) for several seconds to
enter Program mode. PGM starts flashing and
the “P-01” appears in the display.
2. Press the
number. Then press the
or
button to choose a track
2 MEM
button (7) to
memorize it. Select the next track and it will
memorize will be “P-02”.
Repeat these steps to program tracks in the
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Wiring
Gray Cable with Red/White RCA Connectors:
Provides L/R Channel audio signal output to an
additional amplifier.
S
tep 1: The radio chassis is designed to be “Panel
Mounted” through a opening in the mounting panel.
See the installation part of this manual for panel
mounting.
Note: This unit is designed to connect to (4) four
speakers. If the installation only requires (2) two
speakers, use the White and Gray wire sets to con-
nect the speakers.
Step 2: Bring all wiring for the connection of the
unit (including the antenna) through the mounting
hole. Connect the wiring as follows:
Yellow Wire (w/Fuse): Connect this wire to a con-
stant +12 volt power source (a power source that is
not controlled by the ignition key).
WARNING!
Any wires left unconnected must be taped-off
or capped off to prevent shorting.
Red Wire: Connect this wire to a switched +12 volt
power source (a power source turned on and off by
the ignition key).
DO NOT connect speaker ground wires together.
DO NOT connect speaker ground wires to the
chassis of the vehicle.
Blue Wire: Connect this wire to the (+) power
antenna activation circuit. If no power antenna
exists, tape-off the end of this wire to prevent short-
ing out of the unit.
DO NOT connect front and rear speaker wires
together.
FAILURE TO FOLLOW ANY OF THESE WARN-
INGS WILL RESULT IN DAMAGE TO THIS
UNIT AND VOIDS THE WARRANTY.
Black Wire: Connect this wire to the frame of the
vehicle (ground). This wire is the chassis grounding
wire for the unit.
White Wire: Connect this wire to the Left Front
Speaker (+) positive terminal or wire.
White Wire with Black Stripe: Connect this wire to the
Left Front Speaker (-) negative terminal or wire.
Green Wire with Black Stripe: Connect this wire to the
Left Rear Speaker (-) negative terminal or wire.
Green Wire: Connect this wire to the Left Rear
Speaker (+) positive terminal or wire.
Gray Wire: Connect this wire to the Right Front
Speaker (+) positive terminal or wire.
Gray Wire with Black Stripe: Connect this wire to the
Right Front Speaker (-) negative terminal or wire.
Purple Wire with Black Stripe: Connect this wire to the
Right Rear Speaker (-) negative terminal or wire.
Purple Wire: Connect this wire to the Right Rear
Speaker (+) positive terminal or wire.
Yellow Cable with Red/White RCA Connectors:
Connect to the audio line output of any additional
audio or video sound source.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Wiring Diagram
M5000CD
Red
Right Channel
Antenna Socket
Yellow Cable
Auxiliary In
Ignition
Switch (+12v in )
Red Wire
White
Left Channel
Battery
(+12v in)
Yellow Wire
Black Wire
Red
Ground (B-)
Right Channel
Gray Cable
Audio Line Out
Power Antenna
(Switched
+12v out)
Blue Wire
Connect to Line Input
of Optional Amplifier
White
Left Channel
Left
Front
Right
Front
Gray Wire
White Wire
Speaker
Speaker
Gray Wire with Black Stripe
White Wire with Black Stripe
Left
Rear
Right
Rear
Green Wire
Violet Wire
Speaker
Speaker
Green Wire with Black Stripe
Violet Wire with Black Stripe
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CD Changer Connection
CD Changer
M5000CD
(Optional)
Male to Male 8-Pin Din Cable
(Supplied with CD changer)
8-Pin Din Connector
Auxiliary Connection
VCR
or
Audio Out From
VCR / TV /
M5000CD
Video Game
TV
Red RCA (Right)
Auxiliary Audio Input
RCA with Yellow Cables
or
White RCA (Left)
Video Game
Wired Remote Connection
Wired Remote
(Optional)
M5000CD
Female 8-Pin
Male 8-Pin
Mini Din Connector
Mini Din Connector
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Remove Transportation Screws
Mounting Surface
Before installing the unit, remove the two
screws shown in the illustration below.
Mounting
Location
Remove Transportation
Screws Before
Installation
Mounting
Holes
3. Use the glue paper to stick the two mounting
brackets to the back of the mounting surface.
The screw holes of the brackets must respec-
tively aim at the mounting holes in order to fix
the unit to the mounting surface.
4. Open the two pieces of rubber cover on the unit
Note: If this unit is to be installed in a boat or
a spa, you should use the two pieces of plastic
film (30 mm X 20 mm) supplied to seal the two
holes after removing the screws.
Mounting
Surface
Mounting
Brackets
Installing the Unit
1. Using the mounting paper template supplied
with the unit, determine the mounting location
and then stick the template on the location.
Mounting Surface
to display the four screw holes then using four
screws (M4X30) to mount the unit to the dash-
board.
Template
Mounting Surface
Rubber
Cover
2. Cut and remove the hatching area on the tem-
plate. Then drill four 1/8" mounting holes in the
exact position according to the mounting paper.
Screws
Rubber Cover
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Sheet Metal
Screw
Nut
Washer
Metal Strap
Mounting Surface
Trouble Shooting
Before going through the trouble shooting table below, check the wiring connection. If the problem persist,
consult your nearest service dealer.
SYMPTOM
CAUSE
SOLUTION
No power
The ACC Power Supply is not
connected.
Both the red and yellow
wires require power from the
power source.
The fuse is blown.
Replace the fuse.
Disc cannot be loaded,
played or ejected
Presence of disc inside the player.
Remove the disc in the player, and
replace it with another disc.
Disc was inserted upside down.
Insert the compact disc with the
label facing up.
Compact disc is extremely dirty or
disc is defective.
Clean the disc or try playing a
another disc.
Temperature inside the unit is
too high.
Allow the unit to cool off,
then try again.
Condensation.
Leave the player off for an hour, then
try playing it again.
No sound.
Volume is set at the minimum level.
Adjust volume to the desired level.
Speaker wiring is not properly connected. Check the wiring connection.
Sound skips.
The installation angle is more
than 30 degrees
Adjust the installation angle to less
than 30 degrees.
Compact disc is extremely dirty or
disc is defective.
Clean the disc or try playing a
another disc.
The operation keys
do not work.
The built-in microcomputer
is not operating properly
due to noise.
Press the RESET button.
Front panel is not properly fixed
into its place.
The radio does not work. The antenna cable is not connected.
Insert the antenna cable firmly.
Select a station manually.
The radio station automatic The signals are too weak.
does not work.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
GENERAL
CD PLAYER
AM RADIO
Power Supply
Requirements:
DC 12 Volts, Negative
Ground
Signal to Noise Ratio:
> 55 dB
Frequency Coverage:
530 to 1710 kHz
Channel Separation:
> 50 dB
Sensitivity (S/N=20dB):
32 dBu
Chassis Dimensions:
178 mm (W) x 165 (D) x
50 (H)
Frequency Response:
40Hz – 18 kHz
Tone Controls:
FM RADIO
Bass: 100 Hz ±10 dB
Treble: 10 kHz ±10 dB
Frequency Coverage:
87.5 to 107.9 MHz
Maximum Output Power:
Sensitivity (S/N=30dB):
4 x 50 watts
3µV
Current Drain:
Stereo Separation:
15 Ampere (Max.)
> 30dB
Warranty
ONE (1) YEAR LIMITED WARRANTY
Magnadyne Corporation or its authorized agents will within one year from the date of sale to you,
repair, replace or refund the retail sales price of said product or any part thereof, at the option of
the Magnadyne Corporation or its authorized agents, if said product or part is found defective in
materials or workmanship, when properly connected and operating on the correct power require-
ments designated for the specific product. This warranty and Magnadyne Corporation or its autho-
rized agents obligations hereunder do not apply where the product was; damaged while in the pos-
session of the consumer, subjected to unreasonable or unintended use, not reasonably main-
tained, utilized in commercial or industrial operations, or serviced by anyone other than
Magnadyne Corporation or its authorized agents, or where the warning seal on the product is bro-
ken or the power and/or plugs are detached from the unit. Magnadyne Corporation or any of its
authorized agents will not assume any labor costs for the removal and reinstallation of any prod-
uct found to be defective, or the cost of transportation to Magnadyne Corporation or its authorized
agents. Such cost are the sole responsibility of the purchaser.
This warranty does not cover the cabinet appearance items or accessories used in connection with
this product, or any damage to recording or recording tape, or any damage to the products result-
ing from improper installation, alteration, accident, misuse, abuse or acts of nature.
MAGNADYNE CORPORATION OR ITS AUTHORIZED AGENTS SHALL NOT BE LIABLE TO
ANYONE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES OR CLAIMS EXCEPT THOSE
ACCORDED BY LAW. NO EXPRESSED WARRANTY OR IMPLIED WARRANTY IS GIVEN
EXCEPT THOSE SET FORTH HEREIN. NO IMPLIED WARRANTY SHALL EXTEND BEYOND
ONE YEAR FROM THE DATE OF SALE.
This warranty extends only to the original purchaser of the product and is not
transferable. Some states do not allow limitations on how long an implied warranty lasts, and
some states do not allow the exclusion or limitation of incidental or consequential damages,
so the above limitations or exclusion may not apply to you. This warranty gives you specific
legal rights, and you may have other rights that vary from state to state.
Defective merchandise should be returned to the original point of purchase or secondly, to:
Magnadyne Corporation, 1111 W. Victoria Street, Compton CA 90220
Return Authorization must be obtained before sending, or merchandise may be refused.
© Copyright 2003 Magnadyne Corporation
M5000CDUM Rev. A 05-03
Download from Www.Somanuals.com. All Manuals Search And Download.
|