Mackie Speaker System ART500 User Manual

Specifications  
ART500  
System:  
Transducers:  
Passive Speaker System  
Freq. Range (–10 dB):  
50Hz-20kHz  
Low Frequency:  
Quick-Start Guide  
15" (380 mm) diameter woofer  
The ART500 is a full-range two-way  
professional passive speaker system that  
combines high power, wide bandwidth, and  
the reduced weight of a special hybrid  
construction for fixed-installation systems. The  
15" low-frequency transducer, in combination  
with a 2" titanium compression driver coupled  
to an integral 80º x 60º constant directivity  
polynomial horn, form an extremely powerful  
package for any small to medium-sized sound  
reinforcement application.  
It features dual Neutrik Speakon® input  
and output connectors for cascading multiple  
speakers. The passive crossover is designed  
to reduce heat dissipation and optimize the  
power response of the loudspeaker.  
Freq. Response ( 3 dB):  
70Hz-17kHz  
High Frequency:  
2" (51 mm) compression driver,  
horn loaded  
Horz. Coverage Angle (–6 dB):  
80° nominal  
Physical:  
Vert. Coverage Angle (–6 dB):  
60° nominal  
Enclosure:  
Asymmetrical trapezoidal,  
reinforced polypropylene  
Directivity Factor Q (DI):  
10.7 (10.3), averaged 1kHz-10kHz  
Mounting:  
System Sensitivity:  
Lockable 1-3/8" (35mm) stand  
mount  
100 dB, 1W@1m  
Rated Maximum SPL:  
Rigging Inserts:  
6 points, accepts M10 threaded  
133 dB @ 1 m (3.3ft) peak  
HF Protection:  
The enclosure is constructed of high-  
hardware  
Over-voltage dampening  
strength polypropylene and multilayer wood,  
with M10 threaded inserts on all four sides for  
rigging, and an integral locking 1-3/8" socket  
in the bottom for mounting on a standard  
speaker stand.  
Input/Output Connectors:  
2 Neutrik Speakon  
System Input Power Rating:  
500W RMS  
Dimensions HxWxD:  
29.1" x 17.9" x 14.8"  
2000W Peak  
Recommended Amplifier Power:  
700W RMS  
(740 mm x 454 mm x 375 mm)  
Net Weight:  
System Nominal Impedance:  
8 ohms  
72.7 lb (33.0 kg)  
Safety First!  
Before connecting and using the  
equipment, please read this Quick-Start Guide  
carefully and keep it for future reference.  
Crossover Frequency and Slope:  
1.8kHz; 24 dB/octave  
HF Protection:  
Dynamic  
WARNING! This equipment has been  
designed to be installed by qualified  
professionals only! There are many factors to  
be considered when installing professional  
sound reinforcement systems, including  
mechanical and electrical considerations, as  
well as acoustic coverage and performance.  
Mackie Industrial strongly recommends that  
this equipment be installed only by a  
professional sound installer or contractor.  
16220 Wood-Red Road NE Woodinville, WA 98072  
TEL +888.337.7404, FAX +425.487.4337  
UK +44.1268.570.808, FAX +44.1268.570.809 [email protected]  
ITALY +39.0522.354.111, FAX +39.0522.332.294 [email protected]  
FRANCE +33.3.8546.9160, FAX +33.3.8546.9161 [email protected]  
GERMANY +49.2572.96042.0, FAX +49.2572.96042.10 [email protected]  
Part No. 910-171-20 Rev. A 2/00  
© 2000 Mackie Industrial. All Rights Reserved. Printed in the USA.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

La Crosse Technology Clock 404 1236 User Manual
LeapFrog Games MIND MANIA SPELLING CLIP User Manual
Learning Resources Games LER 3008 User Manual
Lenovo Computer Monitor L193p User Manual
LG Electronics Network Card GH22LS30 User Manual
LOREX Technology Security Camera l14q684c User Manual
Mad Catz Bluetooth Headset 90700 User Manual
Makita Saw 4329K User Manual
Maxtor Computer Drive 15K II User Manual
Mellerware Juicer 2 6 1 0 53 0 W User Manual