™
™
CR4BT • CR5BT
®
Multimedia Monitors w/ Bluetooth
O W N E R ’ S M A N U A L
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
CR4BT • CR5BT Features
Features ..........................................................................................3
•
•
•
Studio-quality design, sound and performance ideal
for multimedia creation and entertainment
Stream music from any smartphone, tablet or other
Bluetooth® enabled device
Professional-grade components for optimized
sonic performance
•
•
50 watts of clean, articulate stereo sound
Polypropylene-coated woofer
•
•
4" [CR4BT]
5" [CR5BT]
• .75" Ferrofluid-cooled silk-dome tweeter
•
Ultra-wide frequency range, perfect for full-range
multimedia
•
•
70 Hz – 20 kHz [CR4BT]
60 Hz – 20 kHz [CR5BT]
•
•
Choose which side of the desk gets the volume knob
with the convenient speaker placement switch
Convenient front panel volume knob with lit power
ring gives you on/off/volume control and power
indication where you need it
•
•
Plug your smartphone or other source right
into the front of the speakers and listen instantly
Front-facing headphone jack auto-defeats speaker
output and provides tactile headphone volume
control
•
•
•
•
•
A choice of inputs for simple connection to almost
any audio source (Bluetooth, 1/4", 1/8", RCA)
Smooth waveguide design delivers unmatched
clarity and sound dispersion at all listening levels
Custom-tuned rear ports for smooth, even bass
extension
All-wood cabinet provides a natural sonic character
superior to low-grade plastic designs
Please write your serial number here for future
reference (i.e., insurance claims, tech support,
return authorization, make dad proud, etc.)
Included accessories:
•
Acoustic isolation pads minimize boomy bass
build-up and provide up/down tilt control for more
focused listening
•
1/8" to stereo RCA cable to connect computer
Purchased at:
output to speakers
•
Speaker-to-speaker cable
Date of purchase:
Like us
Follow us
Part No. SW1135 Rev. A 09/15
Watch our dang videos
©2015 LOUD Technologies Inc. All Rights Reserved.
3
Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Quick Start
Creative Reference™ Multimedia Monitors are
designed for multimedia creation and entertainment,
delivering studio-quality design and performance
in affordable designs.
We realize that you can’t wait to hook up your CRBT
Creative Reference Multimedia Monitors and try them
out. Nevertheless, please take the time to read this page
NOW, and the rest can wait until you’re good and ready.
Featuring 50 watts of power and premium
transducers, CRBT monitors ensure pristine, accurate
sound for any application. Additionally, the CRBT Series
Multimedia Monitors feature seamless Bluetooth®
music streaming capability.
1. Turn the volume control on the front of the powered
CRBT monitor down (fully counterclockwise) before
turning the unit on for the first time.
2. Set the power switch on the back panel off. This will
prevent you from accidentally connecting a hot signal
source to the monitor and getting a rude surprise.
Convenient features include a front panel input for
smartphone playback and a dedicated headphone out.
Plus, you get cabling to get started right out of the box.
3. Connect the black (–) and red (+) speaker wires
from the powered monitor’s spring clips to the
passive monitor’s spring clips.
4. Connect the affixed line cord into an AC outlet.
The monitor may accept the appropriate voltage
as indicated on the back panel.
With these Creative Reference™ monitors, you get
professional sound quality and features in compact
desk-friendly designs perfect for work, play and
everything in between.
5. Turn on the power switch on the rear panel of the
CRBT monitor
.
6. Connect your device via Bluetooth
[instructions on page 9]...
...OR...
Connect the line-level monitor signal from your
computer, mixer, or other signal source to the input
jacks on the rear panel of the Creative Reference
Monitor (1⁄4” or RCA). Turn the computer, mixer
or other signal source on.
7. Turn the front panel volume control clockwise until
the monitor “clicks” on and the greatest of all Rings
of Power – the One Ring – surrounding the volume
knob illuminates.
8. Play an audio file and slowly turn the front panel
volume control to a comfortable listening level.
How to Use This Manual
After this introduction, a getting started guide will
help you get things set up fast. The hookup diagrams
show some typical setups, while the remaining sections
If you desire a more thorough walk-through of your
CRBT monitors, there is a wealth of information in the
following pages!
provide details of the CR4BT and CR5BT monitors.
This icon marks informartion that is
critically important or unique to these
monitors. For your own good (and our
peace of mind), please read and remember them.
You will be quizzed later.
Additional Tidbits of Wisdom
• Never listen to loud music for prolonged periods.
Please see the Safety Instructions on page 2 for
information on hearing protection.
•
When you shut down your equipment, turn off the
monitors first to prevent thumps and other noises
generated by any upstream equipment from coming
out the speakers. When powering up, turn on the
monitors last.
This icon draws attention to certain features
and functions relating to the usage of your
CRBT monitors.
• Save the sales receipt and original packaging in case
you ever need warranty service. See page 15 for details.
Multimedia Monitors w/ Bluetooth®
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Hookup Diagrams
CR4BT / CR5BT
CR4BT / CR5BT
The illustration above shows a common use for CRBT Series Multimedia Monitors. Perhaps a friend
created a playlist on their smartphone and wants to share it. With great hesitation, you finally oblige.
Everyone has that one friend with terrible taste in music. We know, it happens.
In this example, a smartphone is connected to the CRBT Series Multimedia Monitors via Bluetooth.
Optional: simply connect the cable from the smartphone’s output/headphone 1/8" jack to the 1/8" aux
input on the front panel of the powered CRBT Series Multimedia Monitor.
Next we’ll want to connect the passive speaker. The included black (–) and red (+) speaker wires
should be connected from the powered monitor’s spring clips to the passive monitor’s spring
clips as detailed by the dotted lines above:
Connect black (–) to black (–) and red (+) to red (+).
Almost there! Move the ‘Powered Speaker Position Select’ switch to either the “L” or “R” position
based on whether the powered reference monitor – the one with the volume knob – will be on
the left or right side.
Now position the monitors where you would like them. Play audio through the smartphone making
sure that the volume of the smartphone and monitors are above “0”.
Last step: move the monitors around until the optimal sound has been achieved and adjust volume
to taste.
Optional: plugging a pair of headphones into the 1/8" headphones jack auto-defeats the speaker
output. The front panel volume control then controls the level going to the phones.
5
Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Hookup Diagrams continued...
CR4BT / CR5BT
CR4BT / CR5BT
The illustration above shows a typical use for CRBT Series Multimedia Monitors. Everyone needs tunes
while working, right...or is it just me?
In this example, simply connect the cable from the computer’s 1/8" output jack to the L/R RCA inputs
of the powered CRBT Series Multimedia Monitor. If you prefer to use 1/4" inputs instead of RCA inputs,
that option is available, too.
Next we’ll want to connect the passive speaker. The included black (–) and red (+) speaker wires
should be connected from the powered monitor’s spring clips to the passive monitor’s spring clips
as detailed by the dotted lines above:
Connect black (–) to black (–) and red (+) to red (+).
Almost there! Move the ‘Powered Speaker Position Select’ switch to either the “L” or “R” position
based on whether the powered reference monitor – the one with the volume knob – will be on
the left or right side.
Now position the monitors where you would like them. Play audio through the computer, making sure
that the volume of the computer and monitors are above “0”.
Last step: move the monitors around until the optimal sound has been achieved and adjust volume
to taste.
Optional: place the included acoustic isolation pads underneath the monitors to minimize boomy bass
build-up and provide up/down tilt control for more focused listening.
Multimedia Monitors w/ Bluetooth®
6
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Signal Inputs
Rear Panel Description
Connect the line-level signal from a computer, mixer,
or other signal source to one pair of these input jacks.
There are two types of input connectors to choose from:
1/4" line-level signals driven by balanced or unbalanced
sources or RCA line-level signals driven by unbalanced
sources. Since these are connected together electrically,
do not connect more than one signal at a time to the
input jacks.
6
5
3
A balanced signal provides better noise rejection
and is the preferred method, especially if using a cable
longer than 20 feet (6 meters).
They are wired as follows, according to standards
specified by the AES (Audio Engineering Society):
3
4
Balanced 1/4" TRS
Hot (+)
Tip
Cold (–)
Shield (Ground)
Ring
Sleeve
RING SLEEVE
SLEEVE RINGTIP
TIP
RING
TIP
SLEEVE
2
1
Balanced 1/4" Connectors
Unbalanced 1/4" TS
Hot (+)
Tip
Shield (Ground)
Sleeve
1. AC Line Cord
SLEEVE
SLEEVE
TIP
Plug the attached power cord into a live AC outlet
that has the correct voltage indicated on the rear panel
TIP
.
TIP
SLEEVE
2. Power Switch
Unbalanced 1/4" Connectors
Press this switch left to turn the CRBT multimedia
monitors on. Make sure the volume knob [9] is off
[fully counter-clockwise] before turning it on.
The ring surrounding the volume knob illuminates
when the CRBT multimedia monitor is plugged into
an AC outlet, the power switch is turned on and
the front panel volume control is turned clockwise
until the monitor “clicks” on.
Unbalanced RCA
Hot (+)
Shield (Ground)
Tip
Sleeve
SLEEVE
TIP
SLEEVE
TIP
Press the right side of this switch down to put the
monitors into standby mode. They will not function,
but the circuits are still live. To remove AC power,
either turn off the AC supply, or unplug the power
cord from the AC supply.
RCA Unbalanced Connectors
7
Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Powered Speaker Position Select Switch
Front Panel Description
Here you get to decide if the powered monitor is
to be positioned on the left side (switch up) or right
side (switch down) of the desk. One convenience is
that it keeps the power cord, front and/or rear panel
connections from crossing your work space.
Additionally, it doesn’t discriminate between right
or left-handed users. Simply set it up to suit your
preference.
7. Aux Input
Connect a line-level signal from an MP3 player,
smartphone or other signal source to this input jack
using an 1/8" connector.
It is wired as follows, according to standards specified
by the AES (Audio Engineering Society):
Stereo 1/8" TRS
Left Channel
Right Channel
Ground
Tip
Ring
Sleeve
5. Wire Terminals ( )
Connect the included
black (–) and red (+)
speaker wires from
the powered monitor’s
spring clips [big
green ball number 5 on
page 7] to the passive
monitor’s spring clips
(as seen to the right).
8. Phones Output
5
This 1/8" TRS connector supplies the output to stereo
headphones. The volume is controlled with the volume
knob [9]. The signal to the power amp is killed when
headphones are connected.
The phones output is wired as follows, according to
standards specified by the AES (Audio Engineering
Society):
6. Custom-Tuned Rear Port
The custom-tuned rear port uses the radiation from
the rear of the woofer cone to extend the low-frequency
response of the speaker. The size of the port is carefully
designed with respect to the volume of the cabinet
and the characteristics of the woofer to produce
low-frequency extension.
Stereo 1/8" TRS
Left Channel
Right Channel
Ground
Tip
Ring
Sleeve
Warning: The headphone amp is loud and
could cause permanent hearing damage.
Even intermediate levels may be painfully
loud with some headphones. BE CAREFUL! Always turn
the volume knob all the way down before connecting
headphones. Then turn it up slowly as you listen
carefully.
10
9
9. Volume Knob
CRBT Series multimedia monitors expect a line-level
signal at its input. Use this control to adjust the
sensitivity of the input section according to the signal
strength at its input.
The volume knob not only adjusts the overall output
level, but it also turns the monitor on and off. Simply
turn the knob counter-clockwise until it “clicks” off.
Turn the knob clockwise to turn the volume up.
The ring surrounding the volume knob illuminates
when the reference monitor is plugged in and the power
switch is on.
7
8
Refer to the Quick Start section on page 4 for the
level-setting procedure.
Multimedia Monitors w/ Bluetooth®
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Three types of input connectors are provided to
interface with virtually any application you may have:
10. Bluetooth
Upon powering up the CRBT, the Bluetooth function
is either:
• Balanced TRS / Unbalanced TS cables work well
with the 1/4" inputs.
• Unbalanced phono cables work well with the RCA
inputs.
(1) In sleep mode and the Bluetooth LED is off.
See ‘Pairing and Connecting for the first time’ below.
(2) Paired and Connected and the Bluetooth LED
is on. See ‘Previously Paired and Connected Devices’
below.
• Balanced TRS cables work well with the 1/8" inputs.
NOTE: Route the cable away from AC power cords
and outlets. These are common sources for hum
in an audio signal. Wall warts and line lumps are
especially insidious hum inducers!
Pairing Paired and Connecting for the first time:
To enter pairing mode, press and hold the
Bluetooth button for two seconds. The button LED
will illuminate and flash for approximately 30 seconds
while in pairing mode. [The LED will continue to flash
until it has successfully paired and connected].
NOTE: In certain home theater applications, it may
be necessary to connect the speaker outputs from a
stereo receiver to the inputs of the CR Series reference
monitors if the receiver doesn’t have preamp outputs
or other line-level output connections.
While CRBT is in pairing mode, simultaneously
scan for Bluetooth devices on your device. You should
see CRBT appear in the “available devices” list. From
there, your Bluetooth device should indicate that it
is successfully connected. Additionally, the Bluetooth
button will stop flashing and remain solid. If it does
not, start the pairing process again, and make sure that
CRBT and your device are both in pairing mode at the
same time.
CAUTION: Do not attempt to connect
a speaker output directly to the 1/4"
or RCA inputs of the powered CRBT Series
multimedia monitor! Speaker levels are much higher
than line levels and can damage the input circuitry
in the CRBT Series multimedia monitors.
However, it is possible to insert a speaker-level
to line-level signal attenuator between the receiver’s
speaker output and the powered CRBT Series
Previously Paired and Connected Devices:
The Bluetooth connection will disconnect if it’s out
of range. Previously paired and connected devices will
automatically reconnect and the Bluetooth button LED
will illuminate (if the volume knob is at least clicked
on).
multimedia monitor’s input. Any local authorized dealer
should be able to assist, or you can build your own.
While your Bluetooth device is connected to
a CRBT, you can quickly press the Bluetooth
button on the front of the unit to pause/
play your audio (the same as if you’d pressed
pause/play on your device).
Care and Cleaning
CRBT Series multimedia monitors will provide many
years of reliable service if you follow these guidelines.
Input Signal Wiring
Included with the CRBT Series multimedia monitors
are multiple accessories, including:
• Avoid exposing the monitors to moisture.
• Avoid exposure to extreme cold (below freezing
temperatures).
• Use a dry cloth to clean the cabinets.
Only do this when the power is turned off.
•
•
1/8" to stereo RCA cable to connect computer
output to speakers
Speaker-to-speaker cable
Even though these cables are included, they might
need to be replaced at some point [e.g. cats play tug-
of-war, kid uses it as a whip, you use it as a makeshift
tourniquet, etc.]. Or perhaps you prefer to use the 1/4"
inputs. If so, we recommend using high-quality, shielded
cables to connect the signal source to the signal input
jack [3] on CRBT Series multimedia monitors.
9
Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A: Service Information
If you think your CRBT Series multimedia monitor
has a problem, please check out the following
troubleshooting tips and do your best to confirm
the problem. Visit the Support section of our website
lots of useful information such as FAQs and other
documentation. You may find the answer to the
problem without having to send your CRBTs away.
Bad Sound
•
Is the input connector plugged completely into the jack?
Make sure it is plugged all the way in.
• Is it loud and distorted? Reduce the signal level at the
source.
• If possible, listen to the signal source with headphones
plugged into the preamp stage. If it sounds bad there,
it’s not the monitor.
Troubleshooting
No Power
• Too much bass or not enough bass? Move around the
room and see if the bass response changes. It’s possible
your listening position coincides with a room mode
where the low frequencies either become exaggerated
or nulled. If so, try moving the monitors to a different
position, or moving your listening position.
• Our favorite question: Is it plugged in?
• Make sure the power cord is plugged all the way into
the AC outlet.
• Make sure the AC outlet is live (check with a tester or
lamp).
Noise/Hum/Buzz
•
•
Check the signal cable between the computer/mixer/
MP3 player/smartphone and the reference monitor.
Make sure all connections are secure. These problems
usually produce crackling noises, hum, or buzz.
• Is the power [2] switch on the rear panel in the ON
position?
• Is the ring surrounding the volume knob [9] on the
front panel illuminated? If not, make sure the AC outlet
is live. If so, refer to “No Sound” below.
If connecting an unbalanced output to the CRBT Series
multimedia monitor’s balanced input, make sure the
shield is connected to the unbalanced ground of the
source.
No Sound
• Make sure the signal cable is not routed near AC cables,
power transformers, or other EMI sources (including
wall warts and line lumps!). These sources usually
produce hum.
• Is the ring surrounding the volume knob [9] on the
front panel illuminated? If not, refer to “No Power”
above.
• Is the volume knob [9] turned up?
• Is there a light dimmer or other triac-based device on
the same AC circuit as the monitor? Dimmers cause
buzzing noises. Use an AC line filter or plug the monitor
into a different AC circuit.
• Is the signal source turned up? Make sure the signal level
from the computer, mixer, MP3 player, Bluetooth device
(or whatever device immediately precedes the reference
monitors) is high enough to produce sound.
• Excessive hiss is an indication of an incorrect gain
setting somewhere before the speaker.
• If it’s a stereo pair, try switching them around. For
example, if a left output is presumed dead, switch the
left and right cords at the monitor end. If the problem
switches sides, it’s not the monitor. It could be a bad
cable, or no signal from the source.
• If possible, listen to the signal source with headphones
plugged in. If it sounds noisy there, it’s not the monitor.
Bluetooth Issues
• Please email or call Technical Support if you are having
Bluetooth connection issues:
o 1-800-898-3211
Multimedia Monitors w/ Bluetooth®
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Repair
For warranty service, please refer to the warranty
information on page 15.
Non-warranty service is available at a factory-
authorized service center. To locate the nearest
Service for CRBT Series Monitors living outside
the United States may be obtained through local
dealers or distributors.
If you do not have access to our website, please call
our Tech Support department at 1-800-898-3211 (normal
business hours, Pacific Time), to explain the problem.
They will tell you where the nearest factory-authorized
service center is located in your area.
Need help with the CRBT Series multimedia monitor?
•
•
•
Email us at: [email protected].
Telephone 1-800-898-3211 to speak with one of our splendid technical support
chaps (Monday through Friday, normal business hours, Pacific Time).
11
Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B: Technical Information
CRBT Series Specifications
Acoustic Performance
Bluetooth Information
Frequency Response (–3 dB)
Frequency Response (–10 dB)
Maximum SPL Peak Per Pair
Crossover Frequency
70 Hz – 20 kHz [CR4BT] Bluetooth Protocol
3.0
60 Hz – 20 kHz [CR5BT] Bluetooth Function
Audio Streaming
60 Hz – 20 kHz [CR4BT]
50 Hz – 20 kHz [CR5BT]
Construction Features
Basic Design
Rectangular
Solid MDF
100 dB [CR4BT]
Enclosure Construction
103 dB [CR5BT]
Finish
Black vinyl wrap
Handles
At <10 lb each, there
is no need for handles!
3 kHz
Port Configuration
Custom-tuned
rear port tube
Damping
Adiabatic batting
Transducers
Low Frequency
Display LED (Front)
Power ring
(around volume knob)
4.0 in / 102 mm polypropylene-
coated woofer [CR4BT]
Operating Temperature
0 – 40 ˚C
32 – 104 ˚F
5.0 in / 127 mm polypropylene-
coated woofer [CR5BT]
High Frequency
0.75 in / 19 mm silk dome tweeter
Physical Dimensions and Weight
CR4BT
Amplifiers
Rated Power
Dimensions
28 watts rms
50 watts peak
Height
Width
Depth
Weight
8.8 in / 224 mm
6.1 in / 155 mm
7.3 in / 185 mm
Design
Class AB
12.0 lb / 5.4 kg [pair]
CR5BT
Dimensions
Height
10.2 in / 259 mm
6.9 in / 175 mm
9.0 in / 229 mm
Input / Output
Input Type
Width
Depth
Weight
Balanced / unbalanced 1/4" TRS,
unbalanced RCA [Rear]
1/8" TRS [Front]
15.0 lb / 6.8 kg [pair]
Input Impedance
Output Type
20 kΩ, balanced bridging;
10 kΩ unbalanced
1/8" stereo headphones [Front]
Disclaimer
LOUD Technologies is always striving to improve our products
by incorporating new and improved materials, components and
manufacturing methods. Therefore, we reserve the right to
change these specifications at any time without notice.
Power Requirements
United States
Europe
Korea
120 VAC, 60 Hz
220–240 VAC, 50/60 Hz
220 VAC, 60 Hz
The Running Man is a registered trademark of LOUD
Technologies Inc. This manual also contains names and
marks of other companies which belong to those respective
companies, and are hereby acknowledged.
Japan
100 VAC, 50/60 Hz
Power Consumption
72 watts with music, loud mix
Note: CRBT Series monitors do not support multiple voltage
configurations. Make sure the voltage rating for your particular
model (as indicated on the rear panel) corresponds with your
local AC mains voltage.
©2015 LOUD Technologies Inc. All Rights Reserved.
Multimedia Monitors w/ Bluetooth®
12
Download from Www.Somanuals.com. All Manuals Search And Download.
CRBT Series Block Diagram
Multimedia Monitors w/ Bluetooth®
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
Please keep your sales receipt in a safe place.
This Limited Product Warranty (“Product Warranty”) is provided by LOUD Technologies Inc. (“LOUD”)
and is applicable to products purchased in the United States or Canada through a LOUD-authorized
reseller or dealer. The Product Warranty will not extend to anyone other than the original purchaser
of the product (hereinafter, “Customer,” “you” or “your”).
For products purchased outside the U.S. or Canada, please visit www.mackie.com/support to find
contact information for your local distributor, and information on any warranty coverage provided
by the distributor in your local market.
LOUD warrants to Customer that the product will be free from defects in materials and workmanship
under normal use during the Warranty Period. If the product fails to conform to the warranty then LOUD
or its authorized service representative will at its option, either repair or replace any such nonconforming
product, provided that Customer gives notice of the noncompliance within the Warranty Period to
the Company at: www.mackie.com/support or by calling LOUD technical support at 1.800.898.3211
(toll-free in the U.S. and Canada) during normal business hours Pacific Time, excluding weekends
or LOUD holidays. Please retain the original dated sales receipt as evidence of the date of purchase.
You will need it to obtain any warranty service.
For full terms and conditions, as well as the specific duration of the Warranty for this product, please
visit www.mackie.com/support.
The Product Warranty, together with your invoice or receipt, and the terms and conditions located
at www.mackie.com/support constitutes the entire agreement, and supersedes any and all prior
agreements between LOUD and Customer related to the subject matter hereof. No amendment,
modification or waiver of any of the provisions of this Product Warranty will be valid unless set forth
in a written instrument signed by the party to be bound thereby.
Correct disposal of this product: This symbol indicates that this product should not be disposed of with your household
waste, according to the WEEE directive (2012/19/EU) and your national law. This product should be handed over to
an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper handling of this type
of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances
that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will
contribute to the effective usage of natural resources. For more information about where you can drop off your waste
equipment for recycling, please contact your local city office, waste authority, or your household waste disposal service.
15
Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
16220 Wood-Red Road NE
Woodinville, WA 98072 • USA
Phone: 425.487.4333
Toll-free: 800.898.3211
Fax: 425.487.4337
Download from Www.Somanuals.com. All Manuals Search And Download.
|