Assembly Instructions
Instrucciones De Asamblea
Instructions d’Assemblée
Spyra Bar Stool
Part # BS-SPYRA
December 2010
A
B
C
CHARGE
I
UP/DOWN
SPEED
ON/OFF
HOLD
D
E
Instructions
Assembly
1. Remove protective cap from Hydraulic pole (G).
2. Insert Hydraulic pole (G) into Base (H).
3. Place Metal pole (E) over Hydraulic pole (G).
4. Insert LED Mechanism (D) into Metal Pole (E).
5. Place Seat (A) over LED Mechanism (D) and Metal
pole (E) .
6. Secure by placing Screws (B) and Washers (C) into
Seat (A). Fasten Screws (B) and Bolts (F).
7. Carefully sit on Seat (A) to secure.
F
Operation
1. Charge internal battery using Adaptor (I).
NOTE: Bar stool MUST be turned off charge.
2. Push SPEED button to regulate color phasing.
3. Push ON/OFF button to turn LEDs on and off.
4. Push HOLD button to pause LEDs on specific colors.
3. Adjust height using lever.
Part List
G
H
1 Seat with backrest (A)
4 Screws (B)
4 Washers (C)
1 LED Mechanism (D)
1 Metal pole with
footrest (E)
4 Bolts (F)
1 Hydraulic pole (G)
1 Base (H)
1 Adapter (I)
ATTENTION:
This cap must be
removed prior to
assembly!
Download from Www.Somanuals.com. All Manuals Search And Download.
|