Operating instructions
TV
Xelos A 20 DVB-T
Xelos A 20
Mimo L 20 DVB-T
Mimo L 20
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound off/on
Switch on from standby
/switch off to standby
Switching over to operate VCR
Switching over to operate
DVD players
Switching over to operate the TV
Picture menu on/off
Sound menu on/off
Timer functions
Picture adjust
Radio mode on/off
Set picture format
Select station directly
/in the menu: enter numbers
or letters
Call AV selection
Electronic Programme Guide
(EPG) on/off(1
No function
Status display on/off
/in the menu: back or hide menu
Show/hide menu
Index on/off
Teletext mode on/off
/in the menu: info texts on/off
P+/P– select station up/down
In the menu: select/set
OK
V–/V+ Volume quieter/louder
Station table on
Red button:
No function
Green button:
Personal/factory values
for picture and sound
/in the menu: confirm/call
Blue button:
programme info
Yellow button: last station
No function
In the menus: Connections
/initial installation - back
(1 only for DVB-T models and
DVB-T stations.
Alternative
remote control
Download from Www.Somanuals.com. All Manuals Search And Download.
Control unit
Indicator:
red = standby
green = operation
Call the menu,
in the menu: up ꢀ
orange = operation without screen display
(e.g. for radio operation)
Channel up,
in the menu: right ꢁ
Channel down,
in the menu: left ꢂ
Radio on/off (back to TV mode),
Switch TV set on/off
to standby
in the menu: down ꢃ
- 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections to rear panel - Xelos A20 / Mimo L20
Input S-Video
Headphone socket
Input Video
Audio inputs
white: left
red: right
On/Off button
(mains voltage)
AV 2
Socket
Euro-AV 2
Service
Connect
service
AV 1
Socket
Euro-AV 1
ANT VHF/UHF
Antenna socket
TV/FM Radio
AUDIO OUT
220 - 240 V ~
L
R
Audio outputs
white: left
red: right
5 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections to rear panel - Xelos A20 DVB-T / Mimo L20 DVB-T
Input S-Video
Headphone socket
Input Video
Audio inputs
white: left
red: right
On/Off button
(mains voltage)
ANT VHF/UHF
Antenna socket
TV/FM Radio
Service
Connect
service
Antenna output
DVB-T tuner
AV 1
Socket
Euro-AV 1
Antenna
connecting
cable(1
DVB-T
Antenna socket
DVB-T
AUDIO OUT
220 - 240 V ~
L
R
Audio outputs
white: left
ret: right
(1
If the set is connected to an antenna system in which the digital (DVB-T) and analogue antenna signals are distributed together house internally, a connecting cable
must be plugged as illustrated. The antenne bridge then makes the connection with the analogue tuner.
In all other cases, connect your antennal(s) as described on page 9.
- 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
Thank you
Installation options
for choosing a Loewe product.
We are happy to have you as a customer.
as a desktop unit
At Loewe we combine the highest standards of technology, design and user
friendliness. This applies equally for TV, video and accessories.
Neither technology nor design is an end in itself, but both are intended to pro-
vide our customers with the best possible audio and visual experience.
We have designed the TV set in such a way that it is easy to operate with
menus. Information about settings in menus is shown automatically for fast
comprehension of the situation.
You will find the answers to many of your technical queries in the index of your
TV. If it is a matter of operating the TV, you can access a function directly from
the index. This saves you from having to read through detailed operating in-
structions and is the reason, why this operating manual only explains the most
important operating steps.
Use the base included in delivery.
as a wall-mounted unit
• Wall holder WM35, Loewe order no. 65495A00.
• VESA adapter, Loewe order no. 89691A00
as a freel-standing unit
• Flat-TV F-Stand 2, Loewe order no. 63495A00.
Cleaning
Use only a soft, clean, damp cloth to clean the TV, LCD screen and remote
control (don’t use any caustic or abrasive cleaning agents).
Features
You can find out the features of your TV set by calling Index - Integrated fea-
tures (call up by pressing the INFO key in TV mode, while no menu is displayed).
With the remote control RC4, you can operate three Loewe units, this TV, a
Loewe video recorder and a Loewe DVD player.
Disposal
Packing and box
You have chosen a long lasting technical product of very high quality. We have
paid a fee to authorised recyclers who will collect the packing from your dealer
for disposal, pursuant to domestic regulations. Nevertheless, we recommend
you to keep the original box and packing material for optimum protection if you
have to transport the set.
Transporting
Only transport the unit in an upright position. Hold the set by the top and bot-
tom edges of the housing. The LCD screen is made of glass and/or plastic and
may break if not handled carefully. Should the LCD screen become damaged
or should the liquid crystal begin to leak, then it is imperative you wear rubber
gloves when removing the set. Should the liquid come in contact with your skin,
thoroughly rinse with water immediately.
The set
Attention: The EU directive 2002/96/EC regulates the proper
way to recycle, handle and utilise used electronic devices.
Hence, all used electronic devices are to be disposed of
separately. Please do not dispose of this set in the normal
household rubbish.
Note on LCD screen
The screen you have purchased meets the highest quality requirements in this
segment and has been tested for pixel errors. Despite the utmost caution in pro-
duction of the sets, it cannot be totally ruled out that some of the pixels might
be defective for technological reasons.
Please understand that such effects cannot be considered as a unit defect in
the sense of the warranty as long as they are within the limits specified by the
standard.
You may return your used set free of charge at designated
recycling centres or at your specialist dealer whenever you purchase a new,
comparable set. You can find out more about recycling (also for countries out-
side the EU) from your local government.
7 -
Download from Www.Somanuals.com. All Manuals Search And Download.
For your safety
For your safety and to avoid unnecessary damage to your TV set, please
read and observe the following safety instructions:
Only use original accessories if possible, e.g. Loewe wall holders and stands.
Never let children handle the TV unattended.
Do not allow children to play in the immediate vicinity of the TV, they could
knock, shift or pull it over and injure someone.
Never leave the TV on unsupervised.
•
This TV set is designed exclusively for reception and reproduction of video
and audio signals.
•
This equipment is designed for domestic and office environments and must
not be used in rooms with high humidity (e.g. bathroom, sauna) or high
concentrations of dust (e.g. workshops). If the equipment is used in the
open air, ensure that it is protected against moisture (rain, drips, splashes,
sprayed water or dew). Do not place any containers filled with liquids or lit
candles on top of the TV.
High levels of moisture and concentrations of dust cause leakage currents in
the equipment, which can lead to danger of electric shock or fire.
The manufacturer‘s warranty is only valid for use in the specified permissible
environment.
•
•
Do not install the TV where there may be vibrations. Vibrations can lead to
material stress.
Pull out the power and antenna cables during thunderstorms. Surge volt-
ages caused by lightning strikes can damage the TV through the antenna
system and the mains. Also remove the antenna and mains plugs in long
periods of absence.
•
•
The mains plug of the TV set must be easily accessible so that the set can be
disconnected at any time.
Lay the mains cable in such a way that it will not be damaged. The power
cable may not be kinked or laid over sharp edges, not stood on and not ex-
posed to chemicals, the latter also applies to the device as a whole. A mains
cable with damaged insulation can lead to electric shocks and is a fire risk.
•
•
If you have moved the TV set out of the cold into a warm environment, leave
it standing for about an hour since condensation may form.
This equipment must only be connected to a mains power supply which has
the same voltage and frequency as that specified on the rating plate; use
the power cable provided. Incorrect voltages can damage the equipment.
•
When removing the mains plug, pull the plug housing and not the cable.
The wires in the plug could be damaged and cause a short circuit the next
time it is plugged in.
•
Like all electronic equipment, your TV needs air for cooling. Obstruction
of the air circulation can
cause fires. Therefore the
air vents on the back must
100 mm
always be kept free. Please
do not place newspapers or
cloths on/over the TV.
100
mm
100
mm
If the TV is placed in a cabi-
net or on a shelf, leave at
least 10 cm at the sides and
10 cm at the top to ensure
sufficient air circulation.
Position the set so that it is
not exposed to direct sunlight and additional heating from radiators.
•
Prevent any metal parts, needles, paper clips, liquids, wax or the like from
getting into the TV set through the air venting slits in the rear panel. This
can lead to short-circuits and possibly to fire. If something should get into
the inside of the TV set, pull out the plug immediately and notify customer
service.
•
•
Never remove the back of the TV set yourself. Repair and servicing of your
TV set should only be carried out by authorised TV technicians.
Place the TV set on a level, firm base. The set should not protrude at the
front when installing in cabinets or shelves.
- 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial installation
Antenna
Remote control
Connect the cable system on the back of the set to the ANT VHF/UHF socket.
If separate antenne exist for the radio and TV reception, the two antenne must
be connected by an antenna switch. Appropriate antenna switches are available
from your dealer.
Batteries
To insert or change the batteries press on the arrow. Slide the battery compart-
ment cover downwards and remove it. Insert Alkali Mangan LR 03 (AAA) batter-
ies and ensure that the + and – ends are connected correctly.
Slide the cover upwards to shut.
In DVB-T models, connect the DVB-T antenna to the DVB-T socket and connect
a FM (VHF) antenna to the ANT VHF/UHF socket if necessary (please remove
any plugged antenna bridge, see page 6).
Lay the cables in the cable holder in the rear middle of the TV set.
ANT
+
220 - 240V~
VHF/UHF
+
Xelos A 20
Mimo L 20
TV
R
Information for the disposal of batteries
220 - 240 V ~
220 - 240V~
The batteries provided contain no harmful materials such as
cadmium, lead or mercury.
ANT
VHF/UHF
DVB-T
Regulations concerning used batteries stipulate that batteries
may no longer be thrown out with the household rubbish.
Deposit any used batteries free of charge into the designated
collection containers set up at commercial businesses.
Set the remote control for operating the TV
Xelos A 20 DVB-T
Mimo L 20 DVB-T
TV
Press the TV button.
TV
R
How to operate other Loewe equipment is described on page 23.
220 - 240 V ~
If the reception conditions are good, then a room antenna may be used for
DVB-T. Passive and active room antennas are available on the market. The pow-
er is supplied for an active antenna via the antenna connection. For automatic
programming or in “TV Menu – Connections – Antenna DVB-T,“ the distribution
voltage (5 volts) is to be set correspondingly.
It may be practical to use a nondirectional antenna. If the location is outside the
normal transmitting range, then a unidirectional antenna may also be used to
improve the reception quality.
Connection
Power mains
Plug the small plug of the power cable into the mains socket on the
back of the TV, the large plug into a a 220-240V/50–60 Hertz power
outlet.
You can find out more on the digital stations that can be received in your area
at your specialist dealer.
9 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial installation
5. With OK you get an overview of which settings are to be used for the auto-
matic programming.
Switch On/Off
6. Press the OK button again to start the station search. The set searches for,
sorts and stores all receivable TV stations, according to your setting and the
connected antenna.
Press the On / Off button (mains voltage) on the right hand
side of the set until it locks.
The red indicator on the TV set now lights up (standby mode).
7. When the TV stations are stored, an appropriate message is displayed.
8. The radio stations are then searched for with OK.
9. The TV set searches for, saves and sorts all radio stations which are receiv-
able on your antenna system.
10. When the radio stations are stored, an appropriate message is displayed.
11. The station search is terminated with OK.
Switch on the set with the switch integrated in the display. The
green indicator now lights up (other operating possibilities,
see page 11).
It takes about 2 minutes after switching for the screen to reach full brightness
due to the LCD technology.
12. Finally log in your recorder, DVD player etc. and connect it with the TV set
(also see page 21)
If you will not be using the TV set for a long time, e.g. during a vacation, switch
it off with the On/Off button (mains voltage). The set is then disconnected from
the power supply.
You can repeat initial installation at any time, e.g. after moving house.
INFO
Call the index with the INFO button.
Automatic programming
OK
Select the index item “Repeat initial installation“.
Automatic programming of the TV set is started the first time you switch it on.
Follow the menus
By pressing the OK button in the direction of the arrow
ꢀꢁꢂꢃ you select the setting ...
OK
Start with OK.
OK
... and confirm your settings with OK. You then go to the next
menu.
Channel sorting
You can change the station sorting that was carried out automatically later at
any time, see “TV menu – Settings – Channels – Change“.
OK
Back to the previous menu.
1. First you have to select the menu language.
In models without DVB-T, please continue with step 3.
2. Press the OK button to go to the ”Signal source” menu. If you want to re-
ceive terrestrial stations
digitally (only in DVB-T
models), select “DVB-T”,
confirm with the yellow
colour button. If you se-
Signal source
Antenna/cable
DVB-T
Mark/unmark
Back
OK
Proceed
ꢄ
lect ”Antenna/cable” as well, you can also search for and store conventional
analog stations.
3. For specific national station sorting and pre-settings, enter the location at
which your TV is being used.
In models without DVB-T, please continue with step 5.
4. When you have selected ”DVB-T”, you go to the ”Antenna DVB-T” menu. If
you are using an active antenna, mark “yes (5V)”.
- 10
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial installation
Daily operation
Switch on from stand-by
Directing DVB-T antenna
(only for DVB-T models)
On the set:
If you use a room antenna to receive one or more DVB-T stations that have
picture and sound interference, then you should change the location of where
the antenna is set up.
If the LED on the set glows red or orange:
Press the display window to switch the set on.
To help you direct your antenna or to help you determine the most suitable loca-
tion to set up the antenna, your TV set has a display for the signal quality C/N
and the signal strength Level.
Consult your specialist dealer to find out which channels and frequency bands
(VHF or UHF) are used to broadcast the digital TV stations in your area.
On any one channel, several digital stations are broadcast.
If the red LED on the set is not alight:
Press the On / Off button (mains voltage) on the right hand
side of the set.
Switch to stand-by:
Press the display window, the LED changes colour from green
to red.
Select a TV channel
1. Call the “TV menu“ via the MENU button.
2. Use ꢀꢁ to select “Settings“, then use ꢂ to select the menu line under-
neath.
3. Select “Channels“, then use ꢂ to select the menu line underneath.
Switch on/off with the remote control
TV menu
Settings
INFO
END
Channels
The set is on stand-by, the red LED is alight:
OK
Manual settings
c search
Autom
Change
Press the blue on/off button on the remote control to switch
on the set or ...
4. Select “Manual settings“ and call the menu using OK
AV
Manual settings
Signal source
Channel
with a numeric key (0 – 9) or ...
DVB-T
E 05
Antenna/cabl
wxyz
Frequency
Name
177.50 MHz
Test
C/N 96
Level 99
with the OK button.
OK
Search
Store
END
INFO
The green operating LED then lights up.
5. For digital stations, select “Signal source – DVB-T“.
Switch on radio mode:
(see also page 18).
6. Use the numerical buttons to specify the corresponding channel number.
When you receive a digital station, the system displays the signal quality
C/N via a bar/numeric value and the signal strength via Level. The anten-
na‘s direction or position is best when the largest values possible are
displayed (long bar) for the signal quality and signal strength.
7. Direct the antenna so that the largest numerical value/bar size is reached.
8. If no signal is found in the channel set, you can start the frequency search
run by pressing the blue button within the band selected (VHF or UHF).
9. Check the other channels one after another on which digital stations are
broadcast terrestrially in your area.
RADIO
Press the Radio button.
Switch off radio mode:
RADIO
Press the Radio button again or ...
END
press the button END.
For the weakest station, direct the antenna so that the maximum numerical
value/bar size is achieved.
10. After you position or direct the antenna, we recommend to search for all the
stations using the “Search wizard“ (TV menu – Settings – Channels – Auto-
matic search).
11 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily operation
3. Via the channel overview
Changing channels
OK
Call the channel overview with OK.
1. With cursor ring
Channel overview
12 WDR
AVS
AV2
AV1
P+ / P-: Channel up/down.
OK
13 BR
14 HR
0
1
2
3
4
5
6
7
8
9
VIDEO
ARD
15 MDR
16 ARTE
17 KIKA
ꢂ
OK
ꢂ
ZDF
SAT.1
RTL
18 PHOENIX
19 BR-ALPHA
20 3SAT
21 KABEL
22 CNN INT.
23 H O T
24 TV 5
VOX
3SAT
S–RTL
N–TV
DSF
2. With the numeric keys of the remote control
1 digit stations
Press keys 0 – 9 for one second, and the station changes
instantly.
10 TM3
11 PRO7
25 TRT 1
pqrs
OK
Switch over
Select station
Change programmes
END
0
9
-
MENU
Or press button 0 – 9 briefly, the station then changes after
2 seconds (the station changes immediately when only 9 sta-
tions are stored).
OK
Select station
or
2 digit stations
AV
abc
After briefly pressing the first numeric button keep the second
numeric button pressed for one second, the station then
changes immediately.
select with numeric buttons,
call selected station.
pqrs
wxyz
OK
Or press both numeric buttons briefly, the station then
changes after 2 seconds. (the station changes immediately
when only 99 stations are stored).
Note: Digital DVB-T stations (only in DVB-T models) are marked by “D“.
Calling up audio/video channel positions
3 digit stations
After briefly pressing the first and second numeric button keep
the third numeric button pressed for one second, the station
then changes immediately.
OK
via the station table:
pqrs
wxyz
AV1 for playing a video device which is connected to the
Or press the three numeric buttons briefly, the station then
changes after 2 seconds (the station changes immediately
when only 199 stations are stored).
EURO AV socket 1.
AV2 for playing a video device which is connected to the
OK
EURO AV socket 2.
(AV2 is not available in DVB-T models).
The set has 200 TV memory locations and 3 audio/video memories (AV). DVB-T
models have 2 audio/video memories (AV).
AVS for playing a video device which is connected to the right
hand side of the set at the ”S-Video input” or ”Video input”.
OK
Call with the OK button.
(Further information can be found on page 22).
- 12
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily operation
General information about the menu
operation
OK
or select “off“ with ꢀ.
TV menu
Sound
INFO
END
Loudness
on
We show you how to navigate with the menus with the TV menu as an example.
You‘ll be able to see which ꢀꢁꢂꢃ to use from the dark blue box on the right.
ꢂ
ꢂ
off
If you want to make other audio settings, go up to “Loudness“
with ꢃ and select “other“ with ꢀꢁ for example. You can
also move up further to “Sound“ with ꢃ and select other
settings in the TV menu.
MENU
Open TV menu (in TV mode).
OK
TV menu
INFO
END
Sound
ꢂ
ꢂ
OK
Sound adjust
Bass
other ...
OK
Have the other audio settings displayed with OK. With
ꢀꢁ select the audio setting, e.g. “Maximum volume“
OK
TV menu
Sound
signal Maximum volume
26
INFO
END
ꢂ
ꢂ
Sound adjust
INFO
END
TV menu
Picture
ꢂ
Sound
Connections
Settings
OK
and mark the setting bar for maximum volume with ꢂ.
TV menu
Sound
Maximum Volume
26
Select the function in the TV menu, e.g. “Sound“ (for sound
settings). With ꢁ you move the menu items displayed on the
right to the dark blue box, with ꢀ the menu items displayed
on the left.
OK
INFO
END
ꢂ
ꢂ
Set maximum volume with ꢀꢁ Information about the cur-
rent setting is displayed in the top part of the screen when you
press the INFO button.
OK
INFO
END
TV menu
Sound
ꢂ
ꢂ
Picture
Connection
Settings
INFO
You can hide the infos by pressing the INFO button again.
Select the sound function below with ꢂ , you will then see a
list of the sound settings.
You can increase the treble (values 1 to 12)
or reduce it (values -1 to -12).
OK
TV menu
INFO
END
Sound
ꢂ
ꢂ
Listening mode
Loudness
Sound adjust
normal
Treble Bass
For the audio settings also select the function with ꢀꢁ, e.g.
“Loudness“ (for treble and bass increase at low volume).
TV menu
OK
INFO
END
TV menu
Sound
ng mode Loudness
off
INFO
END
Sound
Treble
0
other ...
Treble Bass
other ...
Bass
ꢂ
Sound
ꢂ
OK
To switch on the Loudness function, mark with ꢁ “on“.
END
To hide all menus, press the END button.
TV menu
INFO
END
Sound
Loudness
off
You are now familiar with handling of the menus so that you can easily operate
the TV with the other menus.
ꢂ
ꢂ
on
13 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily operation
Adjusting the sound
Setting the volume
With V- / V+.
... select/set with ꢀꢁ.
OK
Picture settings: Picture adjustment (normal, intensive, soft), contrast, colour
and sharpness. After ”others....” you will find brightness, tint in NTSC, picture
format (4:3, cinema, zoom, 16:9 zoom, 16:9), Move pict. up/down and movie
mode (DMM).
OK
Volume
24
Operation on the TV set
Switching channels on the TV set
+ Channel up
Sound off/on
Sound off;
Sound on: Press button again or ...
– Channel down
adjust volume with V- / V+.
Other sound settings
Volume, brightness, contrast, color and picture format
Call the sound menu.
TV menu
Sound
Sound adjust
normal
Direct control on TV set
Volume
24
INFO
END
ꢂ
ꢂ
Brightness
Contrast
Picture format
ꢂ
Listening mode Loudness Treble Bass
Open the menu with M.
Select the sound function to be set with ꢀꢁ and with ꢂ to
OK
the appropriate selection...
Direct control on TV set
Contrast
18
ꢂ
ꢂ Picture format
TV menu
Sound
Brightness
Service
INFO
END
Listening mode
Stereo
ꢂ ꢂ Panorama
Dolby Virtual
Select the function to be set with – or +.
... and select/set with ꢀꢁ.
OK
Direct control on TV set
Contrast
18
Sound settings: Sound adjust (normal, Pop, Classical, Speech), Listening mode
(Stereo, Panorama, Dolby Virtual), Loudness, Trebel, Bass.
Under “other ...“ you will find Sound via (TV or HiFi), Loudspeaker sound, AV
audio signal, Maximum volume.
ꢂ
ꢂ
With R to the appropriate setting/selection.
Brightness
24
Setting the picture
Set/select with – or +.
Open the Picture menu.
TV menu
Picture
INFO
END
With M you go back up one level and can select other functions with – or +.
ꢂ
Contrast
other ...
Colour Sharpness
Picture adjust
normal
Select the picture function to be set with ꢀꢁ and with ꢂ to
OK
the appropriate selection...
TV menu
INFO
END
Picture
Colour
6
ꢂ
- 14
Download from Www.Somanuals.com. All Manuals Search And Download.
Modes of operation
Open index
TV mode
INFO
Open index.
In initial installation and daily operation, the TV set is in TV mode. This is also
the case when none of the other modes of operation such as EPG, Teletext or
Radio has been selected. Each of these modes of operation has a menu, which
you can call with the MENU button and with some color button assignments.
In the "Language" menu you can select your menu language for
operating the TV set.
Functioning of the colour buttons in TV mode
Index
Language
1/2
ꢂ
ꢂ
OK
red: no function
Additional functions
Channels
Connections
green: call personal values/factory values for picture and
sound, save picture and sound values as personal values.
Integrated features
Parental lock
Picture Setting
Programme info
END
INFO
END
Standard settings
Call up personal settings
OK
P+/P- Page ꢀ / ꢁ
ꢂ
OK
ꢂ
Activate
Call up factory settings
yellow: call last viewed channel. You can switch back and
forth quickly between two channels with this button.
The index answers many questions, concerning your TV set. If you have a ques-
tion about the operation, you have direct access to it from the index.
This set is delivered in different variants. You can find out what equipment your
TV has under the menu item “Integrated features”.
blue: call programme info
(for DVB-T stations(1 the EPG with the current station info is
called, see page 19).
Select picture format
301
301 ARD-Text Mo 05.12.05
16:16:42
Mo 05.12.05 Das Erste
If you want to set a different format, press this button until the
desired format is selected or select the format with ꢀꢁ.
05.30 ZDF-Morgenmagazin
09.00 heute
09.05 Die glückliche Familie
Tami in Gefahr
09.55 ARD-Wetterschau
Picture format
4:3
ꢂ
ꢂ
cinema zoom zoom 16:9 16:9
10.00 heute
10.03 Verstehen Sie Spaß?................................314
Mit Frank Elstner
12.00 heute mittag
12.15 ARD-Buffet................................................315
13.00 ZDF-Mittagsmagazin................................312
Moving the picture vertically
To reveal picture captions, the picture can be moved vertically
up and down with ꢃꢂin the “Cinema” and “Zoom” picture
formats. The vertical moving of the picture is only possible
when the picture format menu is displayed and the appropri-
ate picture format has been set.
300 <<
Nachmittag > 302
morgen
OK
morgen
–
+
Page selection
Show status display
END
Show/hide status.
1
ARD
Stereo
14:42
Alarm time 06:30
If other languages are broadcast by DVB-T stations(1 the “Lan-
guage/Sound Selection” is displayed under the station display.
Call the Language/Sound selection with the green colour but-
ton and select with ꢃꢂ. Confirm the setting with OK.
OK
If DVB-T stations(1 offer subtitles, “DVB subtitles” is displayed
under the station display. Call the setting for DVB subtitles
with the yellow colour button and select the options with
ꢃꢂ. Confirm the setting with OK.
OK
(1 only for DVB-T models.
15 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Modes of operation
Under “Settings“ you will find the following functions:
TV menu
Channels
MENU
Call up TV menu.
• Automatic search • Manual settings • Change
Parental lock
If you do not want your children to be able to use the TV unsupervised, activate
the parental lock by entering a four-digit access code. You can change or delete
this access code in the ”Parental lock” menu (see also page 28).
Switch the set to stand-by after entering the access code or switch it off with
the On/Off button (mains voltage). When switching on the set only shows a
picture when you enter your access code.
Timer functions
INFO
END
TV menu
Picture
You can have your TV switch off at pre-programmed times or wake
you/remind you with radio or TV. If you are not present at the time, a safety
prompt makes sure the TV switches off again after 5 minutes.
• TV off once only • One-time reminder • Wake up (Mo - Su)
• Wake up with TV or Radio • Wake up volume
ꢂ
Sound
Connections
Settings
You will find a description of the picture and sound settings on page 14. The TV
menu offers other settings for the TV set and for connected devices.
Select devices to be connected under “Connections”:
Time and date
When you receive teletext, the correct date and time setting is picked up by the
set automatically. The time is for information for timing services, e.g. alarm. If
you do not receive teletext you have to set the date and time manually.
Use the numeric buttons on the remote control and the arrows ꢀꢁto move
from one digit position to the next.
For example video recorder, DVD player/recorder, camcorder/digital camera or
Pay-TV decoder.
1. Select the connection (AV1, AV2(1 or AVS) to which you want to connect the
device.
In the time and date menu you can also set when you want the TV set to auto-
matically start and end daylight saving. You can also set a deviation UTC.
2. Confirm with OK.
3. Select the device type , e.g. DVD and the signal type CVBS in the list which
appears.
Language
You can set the language in which the menus are displayed under Settings
- Language.
4. Confirm with OK.
5. Specify which colour standard (e.g. PAL) the connected device transmits the
signal with. Note: The signal cannot always be displayed correctly when the
“Colour standard Automatic” is selected.
If “your“ menu language is not set, you may have to select the “Language“
menu in a language you cannot understand:
6. Confirm with OK.
1. Press the INFO key while no menu is displayed. The index appears.
2. Select the first entry on the first page (1/2), if it is not selected automatically.
3. Confirm with OK.
Other settings under ”Connections”
7. ”RGB insertion yes” (via AV1) to play RGB signals e.g. from a games console
on all channel positions.
8. ”Switching voltage yes” so that the picture is immediately visible on the
screen when playing back from a video device connected to the EURO-AV
socket.
You are now in the language menu and can select your language and enter it
with ”OK”.
(1 AV2 is not available in DVB-T models.
- 16
Download from Www.Somanuals.com. All Manuals Search And Download.
Modes of operation
INFO
Call contents page 100
Teletext mode
Teletext transmits information such as news, weather, sport, program
previews and subtitles.
OK
Call the TOP table.
The TOP table is a general list of teletext. You can only call the
table on stations, which use the TOP operating system.
TEXT
Teletext on/off.
100 100 ARD-Text
ARD TEXT
10.09.04
14:14:42
100 100 ARD-Text
ARD TEXT
10.09.04
14:14:42
Index
> 101
Teletext im Ersten
Index
> 101
Teletext im Ersten
Bulmahn: Bildung statt Eigenheim . . . . . . . . 120
Wird auch der Nahverkehr teurer? . . . . . . . . 121
Australien: Keine Zugeständnisse . . . . . . . . 122
Bulmahn: Bildung statt Eigenheim . . . . . . . . 120
Wird auch der Nahverkehr teurer? . . . . . . . . 121
Australien: Keine Zugeständnisse . . . . . . . . 122
Tote bei Zugunglück in Schweden . . . . . . . . 532
TOP table
Übersicht
Wetter
Vorhersage
ꢂ
tagesschau
ꢂ
OK
Wetter
Städte
Regional
Reisen
Tennis: Haas unterliegt Hewitt . . . . . . . . . . . . 204
Formel 1: Schumacher erneut vorne . . . . . . . 213
Sport 1
TV Guide
ARD heute
int. Städte
Tagesschau . . 110/112
Wetter. . . . . . . . . . . 170
Sport. . . . . . . 200/600
TV Guide . . . 300/400
Kultur. . . . . . . . .
Gesellschaft . . . 530
Lotto/Toto . . 666
Wirtschaft. . . . . . 700
500
ARD morgen
Biowetter
FS-Sendungen
TV Guide 2
weitere . . .
Content
tagesschau
–
+
END
OK
view
Select a topic area with ꢂꢃ.
Select the Topics column with ꢁ.
Select topic with ꢂꢃ ...
Many stations use the TOP operating system, some use FLOF (e.g. CNN). Your TV
supports both these systems. The pages are divided into topic groups and top-
ics. After switching on the teletext, up to 252 pages are stored for fast access.
OK
OK
... and display page with OK.
Page selection with the coloured buttons
The coloured bars (in TOP) or the coloured writing (in FLOF) in the penultimate
row show you which coloured buttons to use, to scroll to topic groups and
topics.
pqrs
wxyz
Enter the page number directly.
red:
page back (not in FLOF).
Displaying teletext pages
green:
yellow:
blue:
page forward (not in FLOF).
to the next topic (only in TOP and FLOF).
AV
Stop self-turning pages (HOLD).
to the next topics area (only in TOP and
FLOF).
wxyz
ZOOM page top part – bottom part – normal size (press but-
ton several times).
Other page selection options
OK
Mark a specified page number on the page (Page Catching).
Tagesschau . . 110/112
Kultur. . . . . . . . . 500
Gesellschaft . . . 530
Wetter. . . . . . . . . . . 170
Sport. . . . . . . 200/600
TV Guide . . . 300/400
Lotto/Toto . .
666
Wirtschaft. . . . . . 700
Sub-pages:
OK
View
OK
Call.
17 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Modes of operation
Teletext menu
Radio mode
MENU
Call the Teletext menu.
RADIO
You can switch radio operation on and off with the
100 100 ARD-Text
ARD TEXT
10.09.04
14:14:42
RADIO button on the remote control or ...
Index
> 101
Teletext im Ersten
Bulmahn: Bildung statt Eigenheim . . . . . . . . 120
Wird auch der Nahverkehr teurer? . . . . . . . . 121
Australien: Keine ZugestŠndnisse . . . . . . . . 122
Tote bei ZugunglŸck in Schweden . . . . . . . . 532
R on the operating ring on the TV.
Tennis: Haas unterliegt Hewitt . . . . . . . . . . . . 204
Formel 1: Schumacher erneut vorne . . . . . . . 213
INFO END
Teletext menu
You see a station table of the radio stations.
ꢂ
ꢂ
OK
Reveal
Settings
Radio mode:
5
ROCK ANT
Pop
7
8
9
DLR
DLF
Here you will find functions such as:
HR-INFO
10 MDR INFO
11 MDR FIGA
12 NDR KULT
13 SWR1
1
2
3
4
5
6
B5 AKTL
• “Reveal” concealed information, e.g. VPS pages in the station table pages
• In the Settings you will find menus to define the preview pages, subtitle
pages and the character set.
BAYERN 1
BR4 KLSK
SUNSHINE
ROCK ANT
ANTENNE
14 SWR2
ꢂ
OK
ꢂ
15 WDR3
16 WDR5
OK
9
MENU
END
Switch over
0
Select station
Scan stations
Previous station
Screen off
-
You can switch off the screen with the red button. The LED on the TV changes
from green to red. You can switch the screen display back on with the red or the
END button on the remote control or with R on the operating ring of the TV set.
Station switching with dark screen: with – or + on the operating ring on the TV
set or with the remote control P– and P+ or with the numeric buttons.
The Sound menu can be called with the
button in radio mode.
Radio menu
MENU
Call Radio menu.
INFO
END
Radio menu
Sound
ꢂ
Channels
Timer functions
In the Radio menu, as in TV mode, you can:
• Set the sound
• Search for radio channels and store them (automatically or manually), delete,
move or rename them.
• Set timer functions.
- 18
Download from Www.Somanuals.com. All Manuals Search And Download.
Modes of operation
Blue coloured key: Call Select date/time/stations/topics
EPG - Programme guide
(only for DVB-T stations)
EPG (Electronic Programme Guide)
Tue. 10.09.
Tue 10.09./14:14
Date
Time
now
soon
EPG is an electronic program guide. With this system, you can easily find the
stations that interest you (sorted according to date, time, channel and topic)
and tag these stations if required.
Channels
Topics
all
all
06:00-06:20 ZDF
06:00-06:30 RTL
06:00-06:25 Kabel 1
06:00-06:25 N3
06:00-06:30 BR
06:00-06:30 WDR
Die Blobs
Wunderbare Jahre
Dennis
Extra en español (5)
Goal. Speak English, Play Football
Lokalzeit Südwestfalen
Using the EPG
EPG
Switch EPG on/off
06:00-07:10 SuperRTL Infomercials
06:00-07:10 Kinderkan Reif für die Dodo-Insel (25)
EPG (Electronic Programme Guide)
Date Tue 10.09.
Time now
Tue 10.09./14:14
14:00-14:20 9LIVE
Reisetraum
Comedyserie - Kandidaten mit gewissen Fehlern
all
all
Channels
Topics
END
Change to programme list
MENU
13:20-14:15 Kabel 1
13:30-14:15 H3
13:55-14:20 Kinderkan Blaubär & Blöd (37)
14:00-14:15 ZDF
14:00-15:00 RTL
14:00-15:00 Sat 1
14:00-15:00 Pro7
14:00-14:30 N3
Die Waltons
ARD-Buffet
Use ꢂꢃ to select the menu line for the date, time, stations or topics. Use
heute - in Deutschland
Das Strafgericht
Zwei bei Kallwass
ꢀꢁ to select within the menu line.
If, for example, you are looking for the next news, select today’s date, “Soon“
under Time, “All“ under Stations and “News“ under Topics.
Das Geständnis - Heute sage ich al
DAS! ab 2
14:00-14:20 WDR
Familienserie - Sturzflug
Die kleinen Strolche (10)
Then you get a list of all news programmes in the programme list below.
OK
END
View
Select date, ..., topics MENU
EPG (Electronic Programme Guide)
Date Tue 10.09.
Tue 10.09./14:14
ꢀ
P+/P–
Page /ꢁ
Time
Channels
Topics
soon
KABEL 1
News
The programme guide menu is divided into two areas: at the top, you can
make the settings for the programme list (date, ..., topics); on the bottom, the
programme list is displayed. Use the blue coloured key to switch between the
two areas to make your selections.
All programmes currently running are listed initially in the programme list. With
the ꢂꢃ buttons, select the programme you want to watch and switch over
with the OK button.
Show
Nachrichten
K1 Journal
Spätnachrichten
K1 Journal
K1 Reportage
Spätnachrichten
Nachrichten
K1 Journal
Hobby
Sport
Child
17:15-17:25 Kabel 1
17:25-17:45 Kabel 1
01:10-01:15 Kabel 1
01:15-01:35 Kabel 1
02:35-03:22 Kabel 1
03:22-03:25 Kabel 1
17:15-17:25 Kabel 1
17:25-17:45 Kabel 1
01:10-01:15 Kabel 1
Nachrichten - News
Spätnachrichten
Use P+/P– to scroll up or down through the pages of the programme guide. In
the selection lines for date and time above, you will see the time change when
scrolling; when you scroll further, the date also changes. When the “Time” line
is selected, you can enter the time as of which the programmes are to be dis-
played; use the numeric buttons on your remote control to do this. Always enter
four digits, such as 0900 for 9 a.m.
If programmes are displayed which have not yet started, you can mark these
with the OK button. The TV set then switches automatically to this station at the
given time.
END
MENU
Change to programme list
If you want to mark one of these news programmes, return to the programme
list using the blue coloured key, select the desired news programme by using
ꢂꢃand mark this by using OK.
In front of the programme’s title, the system places an . This station is
switched later to this programme when the set is switched on. If the TV is off,
it switches on again automatically at the beginning of the marked programme
if this has been set in the EPG menu. If you are out, a security prompt prevents
the TV set staying on unattended.
You have direct access to the selection lines above to pre-select the day, the
time, the station and the topic.
Before leaving the upper selection lines using the blue coloured key, select a
specific line. If you have switched back to the programme list, you can change
this menu line using ꢀꢁ without having to leave the programme list.
19 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Modes of operation
EPG menu
Switch on TV at memo
MENU
Call EPG menu
You can have the TV switched on automatically from standby at the beginning
of the memorized program. If you are not present at the time, a safety prompt
makes sure the TV switches off again after 5 minutes.
INFO
END
EPG menu
Station selection
ꢂ
OK
Switch on TV when marked
The prerequisite for switching on is that “Switch on TV when marked” in the
EPG menu is “yes”.
You will find the following settings in the EPG menu:
• Station selection • Switch on TV when marked
Station selection
If you want certain stations not to appear in the program guide, you can select
and deactivate these in the station selection. Call the station selection in the
EPG menu.
Station selection (EPG data available)
1
2
3
4
5
6
7
8
ARD
ZDF
SAT.1
RTL
VOX
3SAT
S-RTL
N-TV
RTL2
EUROSPORT
PRO7
WDR
13
14
15
16
17
18
19
20
21
22
23
24
BR
HR
MDR
ARTE
KIKA
PHOENIX
BR-ALPHA
N24
KABEL
CNN INT.
9 LIVE
DSF
ꢂ
OK
ꢂ
9
10
11
12
END
OK
Mark/unmark
Mark all
Mark only this
INFO
All stations are marked initially. These stations are then available for the
evaluation in the program guide (prerequisite: EPG data are transmitted for the
respective station).
You can change the station selection with:
OK
Select/remove individual stations.
green coloured button: All stations are selected.
yellow coloured button: One station is selected. All selected
stations are then removed.
- 20
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
Log in the device
Connecting recorders
1. Call the TV menu.
1. Connect your antenna or cable connection to the recorder (1).
2. Select “Connections“.
2. Connect the recorder to the Euro-AV sockets on the TV set if possible (2).
3. Select the free connection (AV1, AV2(1 or AVS).
3. Connect the antenna output of the recorder to the antenna input of the TV
set (3). The antenna signal is then available to both the tuner in the recorder
and in the TV set.
4. Select the device type you want to connect and its signal type in the connec-
tion wizard, e.g. “VHS/8 mm....VCR“ for video recorder.
5. Confirm with OK.
6. Select the colour norm of the video device. If you do not know it, select
”automatic”.
7. Confirm with OK.
Video playback
You get the best picture and sound reproduction when the recorder, DVD player
or camcorder is connected by an AV cable (Scart cable) to one of the AV sockets
of the TV.
When you are playing a video recorder, DVD player, camcorder or digital
camera, select the AV socket to which the video device is connected with ”AV
selection” (button 0 AV) or with the station table.
Recorders transmit a switching voltage during playback which the TV set can
decode (set Connections – Switching voltage to ”yes” in the TV menu). Then the
picture of the recorder is shown at the current channel position during playback.
Calling an AV program in the AV selection list
3
AV
Call AV selection.
2
AV selection
AV1
ꢂ
ꢂ
OK
AV2
AVS
OK
1
Select AV socket for external video device.
ENTREE
ANTENNE
EURO AV2
DECODER
AUDIO
AERIAL
SORTIE
G
OUT
L
SORTIE
ANTENNE
EURO AV1
AUDIO/
VIDEO
OK
Call with OK.
D
R
RF OUT
Now you will see the playback from the connected video device.
220 - 240 V ~
(1 AV2 is not available in DVB-T models.
21 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
Search for and store the station of the video recorder (if no Euro AV
cable is available)
Calling AV stations with the channel overview
Switch on the test station on the VCR or insert a recorded tape and start play-
back. In some video recorders the station must be switched on by activating the
modulator.
OK
Call the channel overview with the OK button in TV mode.
Channel overview
Then call the AV selection on the TV set with 0 AV. Select the menu item “0
VIDEO“ in the AV selection and call with OK.
To prevent “normal” TV stations being found in the search, pull out the antenna
plug from the antenna input of the VCR temporarily (the cable to the antenna
system).
If you cannot see the test station or playback from the cassette, the VCR is
transmitting on a different channel. You then have to search for the station or
set it manually.
12 WDR
AVS
13 BR
AV2
14 HR
AV1
3
OK
3
0
1
2
3
4
5
6
7
8
9
VIDEO
ARD
ZDF
15 MDR
16 ARTE
17 KIKA
SAT.1
RTL
18 PHOENIX
19 BR-ALPHA
20 3SAT
21 KABEL
22 CNN INT.
23 H O T
24 TV 5
VOX
3SAT
S–RTL
N–TV
DSF
10 TM3
25 TRT 1
11 PRO7
OK
Switch over
Select station
Change programmes
END
0
9
-
MENU
1. Call the TV menu with the MENU button.
You will always find the AV sockets at the top of the list with-
2. Select the “Settings“ menu item with ꢀꢁ.
3. Select the line below it with ꢂ and “Channels“ with ꢀꢁ.
out station numbers.
OK
Select the AV socket.
4. Select the line below with ꢂ and “Manual settings“ with ꢀꢁ and call this
menu with OK.
OK
Call with OK.
5. For models without DVB-T:
Select “UHF” in the “Range” menu item and enter “E30“ under the “Channel”
menu item.
For models with DVB-T:
Now you will see the playback from the connected video device.
Select “Antenna/Cable” in the “Signal source” menu item and enter “E30“
under the “Channel” menu item.
6. Start search with the blue button.
7. If the station has been found, enter the name VIDEO, confirm with OK and
save with the red button.
8. A list of the stored stations is displayed.
9. Select 0 (VIDEO) here and overwrite this program place with the red button.
10.Hide the menu again with the MENU button.
Plug the antenna plug back in.
If you now get interference because a TV station is transmitting on the same
channel as the VCR station, you have to change the transmitting station on the
VCR and search for the VCR station on the TV again.
- 22
Download from Www.Somanuals.com. All Manuals Search And Download.
When operating in the VCR or DVD mode, the lamp above the VCR or
DVD button lights.
In DVD mode the following DVD players can be operated: Xemix
6122DO, 8122DA und 6222PS.
In VCR mode the following VCRs can be operated: ViewVision 8106H,
8136H, 8176H.
For other Loewe equipment than that listed, please use the original
remote control.
DVD Recorder Centros: with the enclosed remote control of the Loewe Centros
DVD recorder it is also possible to control the TV functions.
Functions for Loewe DVD players – Remote control RC4
Functions for Loewe video recorders – Remote control RC4
Sound off/on (mute)
Operating VCRs
Switch recorder
on/off – in standby
Operating DVD players
TV
SV
VCR
T-C
DVD
Operating the TV set
Select picture and sound source
Select video and audio input
Display/close Timer list
DISC-MENU
SP/LP
Display/close
ShowView timer Menu
Switch to Long Play
/Standard Play
RADIO
000
Set time display to 0:00:00
Select station directly
/in menu: enter digits
abc
def
ghi
jkl
mno
pqrs
EPG
tuv
AV
wxyz
PIP
Set picture format (TV)
Call AV selection (TV)
Status display on/off
VCR menu on
/in menu: back
END
P+
in the menu: Close menu
INFO
Status display on/off
TEXT
Reverse play
/in menu: select/set
on playback: Slow motion forward
/in the menu: select/set
or to the next menu
V–
V+
OK
P–
V–/V+ volume quieter/louder
/
at stop: Program up/down
on playback: manual tracking
in the menu: Select position
Call up station list
/in menu: call up/confirm
Fast forward
Rewind
/search forwards
/search backwards
Start playback
Start recording
Stop tape
Pause (still frame)
/frame-by-frame advance
Download from Www.Somanuals.com. All Manuals Search And Download.
What to do, if ...
Problem
Possible cause
Help
The device cannot be operated.
Parental lock is activated.
Deactivate the parental lock: In the TV menu - Settings
- switch off parental lock or enter secret code.
General problems with connecting external devices a) The AV standard is set incorrectly
a) Set the standard correctly
b) Set the AV signal correctly
via an AV input.
b) The AV signal is set incorrectly
If “Automatic“ is set for AV standard or AV signal, this
can lead to faulty detection in the case of non-stand-
ardized signals. Then the standard and the signal must
be set according to the specifi cations in the operating
manual of the external device.
No sound via the TV loudspeakers.
In the Sound menu - other the item “Sound via ...“ Change setting to “TV“.
is not set to “TV“.
All menus appear in the wrong language.
Wrong menu language set.
1. Press the INFO key while no menu is displayed. The
index appears.
2. Select the first entry on the fi rst page (1/2), if it is not
selected automatically.
3. Confirm with OK.
You are now in the language menu and can select your
language.
Various characters are displayed incorrectly in
teletext.
The wrong character set is set in the Teletext
menu.
Set the correct character set: Teletext menu - Settings -
Character set - Standard or the appropriate character set.
- 24
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical data
Type
Xelos A20
Xelos A20 DVB-T
Mimo L20
Mimo L20 DVB-T
Item No.
65411 A60
65411 A88
65410 A60 / K60
65410 A88 / K88
Dimensions with foot WxHxD (cm)
Dimensions without foot WxHxD (cm)
53,8x53,9x25,7
53,8x53,9x7,7
53,8x53,9x25,7
53,8x53,9x7,7
50,0x53,9x25,7
50,0x53,9x7,3
50,0x53,9x25,7
50,0x53,9x7,3
Image format
4:3
4:3
4:3
4:3
Image diagonal (cm)
Pixel format
51
51
51
51
640 x 480
500:1
176°
640 x 480
500:1
176°
640 x 480
500:1
176°
640 x 480
500:1
176°
Contrast ratio
Angle of viewing horizontal/vertical
Weight with foot (kg)
Weight without foot (kg)
9,9
8,5
9,9
8,5
9,8
8,4
9,8
8,4
Power consumption (Watt) IEC 62087
Power standby (Watt)
52
56
52
56
2,8
2,8
2,8
2,8
General
Connections
Ambient temperature
0º – 40º Celsius
Jack 3.5mm
Mini-DIN (AVS)
Cinch (yellow)
2 x Cinch (white/red)
2 x Cinch (white/red)
Headphones 32–2000 Ohm
Y/C (S-VHS / Hi 8)
CVBS (VHS/8 mm)
L / R
Video IN
Video IN
Audio IN
Chassis name
Power supply
L 2100 / L 2110 (DVB-T)
230 V +15/–20% / 45-65 Hz
Audio OUT (level adjustable)
L / R
Tuner
VHF/UHF/cable
41 MHz to 860 MHz
200
Hyper band 8 MHz
Station slot memory
TV standards
IEC socket 75 Ohm
IEC socket 75 Ohm(1
IEC socket 75 Ohm(1
Antenna / cable/FM Radio
DVB-T
B/G, I, L, D/K
DVB-T antenna output
DVB-T(1
Colour standard
Sound standard
SECAM, PAL,
EURO AV 1
Video IN
Y/C (S-VHS / Hi 8)
CVBS (VHS/8 mm), RGB)
NTSC-V, PAL-V (60Hz)
mono/stereo/2-sound
Nicam B/G, I, L
Dolby Virtual
2 x 2 Watt
Video OUT
Audio IN
Audio OUT
CVBS
L / R
L / R
Rated audio power
Teletext
FM-Tuner
EURO AV 2(2
Video IN
Y/C (S-VHS / Hi 8)
CVBS (VHS/8 mm)
CVBS
Level 1.5
87,5 – 108 MHz
Video OUT
Audio IN
L / R
Audio OUT
L / R
(1 only for DVB-T models.
(2 AV2 is not available in DVB-T models.
25 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
Stand
Use the Flat-TV F-Stand 2 , Loewe order no. 63495A00.
Wall holder
Use the wall holder WM35, Loewe order no. 65495A00.
VESA adapter
The VESA adapter offers you the possibility of also using your TV set for other
VESA-compatible fastening devices.
Loewe order no. 89691A00
Note: Please only use the original LOEWE VESA adapter for your TV set and use
the VESA-compatible fastening devices recommended by LOEWE.
Loewe DVD players and recorders
The DVD players and recorders from Loewe are characterized by form and colour
which match Loewe TV sets, adapted user guidance and technology. A combina-
tion of the two devices forms a system which offers many advantages.
Subject to delivery options.
- 26
Download from Www.Somanuals.com. All Manuals Search And Download.
Service
Loewe Austria GmbH
Parkring 10
1010 Wien, Österreich
Tel.: +43 - 810/0810-24 (zum Ortstarif)
E-Mail [email protected]
Kjaerulff 1 A/S
Loewe Italiana SRL
Largo del Perlar, 12
37135 Verona (VR), Italia
Tel. +39 - 045 82 51 619
Fax +39 - 045 82 51 622
Email [email protected]
DSV TRADING SA
Plac Kaszubski 8
81-350 Gdynia, Polska
Tel. +48 - 58 - 6 61 28 00
Fax +48 - 58 - 6 61 44 70
Email [email protected]
C.F. Tietgens Boulevard 19
5220 Odense SØ, Denmark
Tel. +45 - 66 13 54 80
Fax +45 - 66 13 54 10
Email [email protected]
International Dynamics
Australasia Pty Ltd.
129 Palmer Street
Richmond 3121, Victoria, Australia
Tel. +61 - 3 - 94 29 08 22
Fax +61 - 3 - 94 29 08 33
Email [email protected]
Gaplasa S.A.
PL Trading (pz 2004) Ltd.
27, Aliat Hanoar St.
Givataiim 53401, Israel
Tel. +972 - 3 - 57 27 155
Fax +972 - 3 - 57 27 150
Email [email protected]
Service Center Loewe
Conde de Torroja, 25
28022 Madrid, España
Tel. +34 - 917 48 29 60
Fax +34 - 913 29 16 75
Email [email protected]
ul. Verkhnaya Maslovka, d. 29
125083 Moscow, Россия
Tel. +7 - 495 612 50 43
Fax +7 - 495 612 47 10
Email [email protected]
Kjaerulff 1 AB
Loewe Opta Benelux NV/SA
Uilenbaan 84
2160 Antwerpen, België
Tel. +32 - 3 - 2 70 99 30
Fax +32 - 3 - 2 71 01 08
Email [email protected]
Loewe Opta France S.A.
13 rue du Dépôt,
Parc del l‘Europe, BP 10010
67014 Strasbourg Cédex, France
Tel. +33 - 3- 88 79 72 50
Fax +33 - 3- 88 79 72 59
Email [email protected]
Mirage Holdings Ltd
Flamingo Complex, Cannon Road
Qormi, Malta
Tel. +356 - 22 - 79 40 00
Fax +356 - 21 - 44 59 83
Email [email protected]
Ridbanegatan 4, Box 9076
21377 Malmö, Sverige
Tel. +46 - 4 06 79 74 00
Fax +46 - 4 06 79 74 01
Email [email protected]
BaSys Czech & Slovak s.r.o.
Stará Vajnorská 17/A
831 04 Bratislava, Slovakia
Tel.: + 421 2 49 10 66 18
Fax: + 421 2 49 10 66 33
Email: [email protected]
Telion AG
Rütistrasse 26
8952 Schlieren, Schweiz
Tel. +41 - 44 732 15 11
Fax +41 - 44 732 15 02
Email [email protected]
SOMARA S.A.
Kjaerulff 1 OY
Artturinkatu 2
20200 Turku, Finland
Tel. +358 - 2 284 1600
Fax +358 - 2 284 1601
Email [email protected]
377, Rue Mustapha El Maani
20000 Casablanca, Morocco
Tel. +212 - 22 22 03 08
Fax +212 - 22 26 00 06
Email [email protected]
Jadran Trgovsko Podjetje
Partizanska cesta 69
6210 Sezana, Slovenija
Tel. +386 - 57 31 04 40
Fax +386 - 57 31 04 42
Email [email protected]
HADJIKYRIAKOS & SONS LTD.
Prodromou 121, P.O Box 21587
1511 Nicosia, Cyprus
Tel. +357 - 22 87 21 11
Fax +357 - 22 66 33 91
CableCom AS
Gneisveien 12
3221 Sandefjord, Norge
Tel. +47 - 33 48 33 48
Fax +47 - 33 44 60 44
Email [email protected]
LinnSight Ltd.
PO Box 8465
KA 7 2YF Prestwick, UK
Tel. +44 - 12 92 - 47 15 57
Fax +44 - 12 92 - 47 15 54
Email [email protected]
Email [email protected]
Enkay Elektronik Servis Müdürlügü
Alemdag Cad: Site Yolu No.: 10
Ümraniye/ Istanbul, Türkiye
Tel. +90 - 216 634 44 44
Fax +90 - 216 634 39 88
Email [email protected]
Ing. Ivo Tietz
Dolní nám. 9
746 01 Opava, Česko
Tel.: +420 553 624 944
Fax: +420 553 623 147
E-mail [email protected]
International Dynamics (NZ) Pty Ltd
PO Box 109 317, Newmarket
Auckland, New Zealand
Tel.: +64 9 379 0179
Fax: +64 9 379 0279
E-mail: enquiries@internationaldynamics.
co.nz
SIBA Engineering S.A.
6, Kifisou Av.,
122 42 Aegaleo, Hellas
Tel. +30 - 210 - 5913793
Fax +30 - 210 - 5317755
Email [email protected]
Videonix (Pty) Ltd
Loewe Opta GmbH,
P.O. Box 31952, Kyalami 1684
Republic of South Africa
Tel. +27 - 1 14 66 47 00
Fax +27 - 1 14 66 42 85
Email [email protected]
Customer Care Center
Industriestraße 11
96317 Kronach, Deutschland
Tel. +49 1801–22256393
Fax +49 9261–99500
Email [email protected]
Basys Magyarorszagi KFT
Epitok utja 2–4
2040 Budaörs, Magyar
Tel. +36 - 23 41 56 37 (121)
Fax +36 - 23 41 51 82
Email [email protected]
Videoacústica
Comercio e Representacoes de
Equipamentos Electronicos S.A.
Estrada Circunvalacao,
Quinta do Paizinho, Arm. 5
2795-632 Carnaxide, Portugal
Tel. +351 - 2 14 24 17 70
Fax +351 - 2 14 18 80 93
© by Loewe Opta 060502
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in Germany
TB/06/09/2.0
Subject to modifications!
© by Loewe Opta 2006
- 28
Download from Www.Somanuals.com. All Manuals Search And Download.
|