Linksys Plumbing Product KVM2KIT User Manual

ProConnect Series  
Integrated KVM  
2-Port Switch  
Use this Guide to install: KVM2KIT  
Installation  
Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Integrated KVM 2-Port Switch  
ProConnect™ Series  
System Requirements  
Table of Contents  
System Requirements  
Console  
One VGA, SVGA or Multisync Monitor Capable of the Highest Resolution  
You Will Be Using on Either Computer  
One PS/2 Keyboard  
3
3
Step 1: Install the  
Integrated KVM 2-Port Switch  
One PS/2 Mouse  
Either Computer  
One VGA, SVGA, or Multisync Monitor Capable of the Highest  
Resolution You Will Be Using on Either Computer  
One PS/2 Keyboard  
Step 2: Use the Hot Key Combinations  
for the Integrated KVM 2-Port Switch  
5
8
9
One PS/2 Mouse  
Specifications  
Step 1: Install the Integrated KVM 2-Port Switch  
A. Power down the monitor and computers before you install the KVM Switch.  
Unplug the power cords of any computers that have the Keyboard Power On  
function; otherwise, the KVM Switch will receive power from those com-  
puters. Then make sure all devices you are connecting are properly ground-  
ed.  
Contact Information  
This Installation Guide is meant to help you  
install the Integrated KVM 2-Port Switch  
quickly and easily. For additional information,  
Note: The connectors on the built-in cables are color-coded to match  
the appropriate ports on your computers; however, double-check  
each connector’s icon before you make the physical connection.  
B. Connect the monitors cable to the monitor port on the KVM Switch.  
C. Connect the PS/2 keyboards cable to the PS/2 keyboard on the KVM  
Switch.  
D. Connect the PS/2  
mouses cable to the  
PS/2 mouse port on  
the KVM Switch.  
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
ProConnect™ Series  
Integrated KVM 2-Port Switch  
E. Use the PC 1 cable for the first PC you are connecting. Plug the cables  
monitor connector into PC 1s monitor port.  
Step 2: Use the Hot Key Combinations  
for the Integrated KVM 2-Port Switch  
F. Plug the PC 1 cables keyboard connector into PC 1s keyboard port.  
G. Plug the PC 1 cables mouse connector into the PC 1s mouse port.  
The KVM Switch is controlled by hot key commands, also known as keyboard  
shortcuts. Hot key commands allow you to conveniently access either comput-  
er directly from the keyboard. Using hot keys, you can manually toggle  
between computers or automatically cycle between computers at a preset time  
interval.  
H. Use the PC 2 cable for the second PC your are connecting. Repeat steps E-  
G.  
I. Turn on the monitor and computers. The PC 1 LED will light up automati-  
cally, and PC 1 will be displayed on the monitor.  
There are three basic hot key combinations:  
• Toggle to the Other Computer  
• Initiate Auto Scan Mode  
• Initiate Auto Scan Mode and Change the Scan Interval  
Toggle to the Other Computer  
To toggle between the two computers, press and release the Scroll Lock key  
twice.  
Your installation is complete. To learn about the hot key com-  
binations used to control the KVM Switch, proceed to step 2.  
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
ProConnect™ Series  
Integrated KVM 2-Port Switch  
Initiate Auto Scan Mode  
Initiate Auto Scan Mode and Change the Scan Interval  
If you want to change the can interval, use the following hot key combination:  
The Auto Scan feature automatically cycles the KVM between both computers,  
so you can monitor their activity without manually switching between comput-  
ers. The factory default scan interval is three seconds.  
1. Press and release the left Shift key.  
2. Press and release the right Shift key.  
3. Press and release the s key.  
4. Press and release the “n” key, “n” being a number from 1-4. Refer to the  
Scan Interval Table.  
To initiate Auto Scan Mode, press and release the left Shift key, and then press  
and release the right Shift key.  
To exit Auto Scan Mode, press the spacebar.  
For example, to initiate Auto Scan Mode and change the scan interval to 10 sec-  
onds, use this hot key combination:  
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
ProConnect™ Series  
Integrated KVM 2-Port Switch  
Contact Information  
For help with installation or operation of this product, contact Linksys  
Technical Support at one of the phone numbers listed in the Technical  
Support insert or Internet addresses below:  
E-mail  
Europe  
United Kingdom & Ireland  
Latin America  
U.S. and Canada  
For unlisted regions or updated contact information please visit the website  
below:  
The letter “n” represents 1-4, depending on the scan interval you want.  
Refer to the Hot Key Summary Table.  
Web  
Specifications  
Model Number:  
Standards:  
KVM2KIT  
PS/2  
Protocol:  
Microsoft PS/2 Protocol  
Ports:  
Keyboard:  
1 PS/2 female - Console  
2 PS/2 male - CPU  
Mouse:  
1 PS/2 female - Console  
2 PS/2 male - CPU  
Monitor:  
1 HD15 female - Console  
2 HD15 male - CPU  
LEDs:  
PC 1, PC 2  
Scan Interval:  
3, 5, 10, or 20 seconds  
(3 is default)  
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
© Copyright 2003 Linksys, All Rights Reserved.  
Printed in the USA.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Lenovo Network Router TS140 User Manual
LG Electronics Network Card USB Drive User Manual
LG Electronics Washer WM3677HW User Manual
Life Fitness Bicycle SR70 User Manual
Lifescan Blood Glucose Meter Fast Take User Manual
Linear Radio AM RGR User Manual
Logitech Speaker System X 530 User Manual
M Audio Electronic Keyboard MK 425C User Manual
McIntosh Speaker HT 12 User Manual
Measurement Specialties Computer Hardware PCI QUAD AC5 User Manual