| 	
		 Lytecaster® Recessed Downlighting   
					1000LVR   
					Page 1 of 1   
					5" Aperture Standard Low Voltage MR16 Non-IC Remodeler Frame-in Kit   
					Frame-In Kit   
					5 1/2”   
					Ceiling Opening   
					Reflector Trim   
					Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.   
					Frame-In Kit   
					Reflector Trims — See Individual Reflector Trim Specification Sheets   
					Adjustable   
					1000LVR   
					Baffles   
					Aperture Cone   
					Pinhole   
					Elbow   
					1055LV   
					1055WHLV   
					1056LV 1064WDLV   
					1063LV 1064WDPLV   
					1064LV   
					1052LV   
					1062LV   
					1064CDLV   
					Features   
					Options & Accessories   
					MR16 Socket Replacement:   
					277V Remote Step   
					1. Junction Box: 4" x 3 1/2" x 2"; .063" (#14 ga.) galvanized steel. UL listed for   
					90° C supply wire. Integral cable clamps permit attachment of nonmetallic   
					Romex® or armored cable without need of additional connectors.   
					2. Transformer: Outboard mounted, magnetic, 120V. primary, nominal 12V.   
					secondary. Removable from below.   
					1975A   
					7997 - 277V down to 120V   
					300W max. load.   
					Down Transformer:   
					Labels   
					UL (Suitable for Damp Locations), I.B.E.W.   
					3. Socket Housing: .036" (#20 ga.) galvanized steel.   
					4. Socket: Field replaceable. Two pin socket, pre-wired with #18 SF1 leads to   
					junction box.   
					5. Thermal Protector: Meets NEC and UL requirements. Insulation must be   
					kept 3" away from fixture sides and wiring compartments and must not be   
					placed above fixture in a manner which will entrap heat.   
					6. Mounting Ring: .048 (#18 ga.) galvanized steel. Accommodates existing   
					ceilings up to 2" thick. Attaches securely to any type of ceiling material   
					without tools using (3) mounting straps provided. Push-in/twist out clips hold   
					reflector flush to ceiling. Includes adhesive backed aperture template.   
					Romex® is a registered Trademark of General Cable Industries Inc.   
					US Patent No’s.: 5,957,572 and other US and Foreign Patents Pending.   
					Job Information   
					Type:   
					Job Name:   
					Cat. No.:   
					Dimming   
					Lamp(s):   
					Notes:   
					Dimming Controls: Use only dimmers specifically designed for use with   
					transformers, like Lightolier Onset®, Sunrise® series LV or VA dimmers, or any   
					Lightolier Controls dimming system. Low voltage fixtures may produce audible   
					sound when used with dimmers, which may be objectionable in acoustically criti-   
					cal areas.   
					631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710   
					We reserve the right to change details of design, materials and finish.   
					
					Lightolier is a Philips group brand   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				 |