LIFE FITNESS TREADMILL
Owner’s Manual
11.17.10 8860701 REV A-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using this product, it is essential to read this ENTIRE operation manual and ALL installation instructions.
This will help in setting up the equipment quickly and in instructing others on how to use it correctly and safely.
Note: This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accor-
dance with the operation manual, may cause harmful interference to radio communications. However, there is no guar-
antee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
•
•
•
•
Re-orient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Class HB (Home): Domestic use.
CAUTION: Any changes or modifications to this equipment could void the product warranty.
Any service other than cleaning or user maintenance, must be performed by an authorized service representative. There
are no user-serviceable parts.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
1.
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
2.
Life Fitness Treadmill Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Component List & Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Installing Uprights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Installing the Console Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Installing the Handrails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Tightening the Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Attaching the Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Console and Activity Zone Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Console Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Workout Overviews . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Virtual Trainer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
3.
3.1
3.2
3.3
3.4
3.5
3.6
3.7
4.
5.
6.
7.
8.
®
9.
Heart Rate Zone Training Exercise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
®
9.1
9.2
10.
10.1
10.2
11.
11.1
11.2
11.3
11.4
11.5
12.
13.
Why Heart Rate Zone Training Exercise? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Heart Rate Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Settings Menu States and Selection Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Service and Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
How to Adjust and Tension the Striding Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Preventive Maintenance Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Using and Testing the Safety Stop Pull Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
How to Obtain Product Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
© 2010 Life Fitness, a division of Brunswick Corporation. All rights reserved.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
This Operation Manual describes the functions of the following product:
Life Fitness Treadmill Model:
FTR Life Fitness Treadmill
Thank you for purchasing a Life Fitness treadmill. Before using this product please read this user manual in its entirety
to ensure that you have the knowledge to safely and properly operate all of the features on your treadmill. We hope you
achieve the product experience on your treadmill that you expect, but if you do have any service issues please go to the
How to Obtain Product Service section which will provide information on obtaining domestic and international product
service. See Specifications in this manual for product specific features.
Statement of Purpose: The Treadmill is an exercise machine that enables users to walk or run in place on a moving surface.
CAUTION:
Health-related injuries may result from incorrect or excessive use of exercise equipment. The manufacturer
STRONGLY recommends seeing a physician for a complete medical exam before undertaking an exercise
program, particularly if the user has a family history of high blood pressure or heart disease, is over the age of
45, smokes, has high cholesterol, is obese, or has not exercised regularly in the past year. The
manufacturer also recommends consulting a fitness professional on the correct use of this product.
If at any time while exercising, the user experiences faintness, dizziness, pain, or shortness of breath,
he or she must stop immediately.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
1
IMPORTANT SAFETY INSTRUCTIONS
WARNING: READ ALL INSTRUCTIONS BEFORE USING THE TREADMILL. SAVE THESE INSTRUCTIONS.
DANGER: To reduce the risk of electrical shock, always unplug this Life Fitness product before cleaning or
attempting any maintenance activity.
WARNING: To reduce the risk of burns, fire, electric shock, or injury, it is imperative to connect each product to a
properly grounded electrical outlet.
WARNING: The treadmill should not be operated when folded up.
WARNING: This treadmill has immobilization software. Only activate the software immobilization when the treadmill
is not in use. Refer to this Owner’s Manual for instructions on immobilizing the treadmill. Keep the instructions out of
the reach of children.
WARNING: Fold the treadmill into the upright and locked position BEFORE rolling it over on its side or picking it up
from the floor. The base or folding frame can swing around unexpectedly if this procedure is not followed.
WARNING: Do not move the treadmill by lifting the console. Do not use the console as a handlebar during a
workout.
WARNING: Allow the running surface to come to a complete stop before folding up.
WARNING: Heart rate monitoring systems may be inaccurate. Over exercising may result in serious injury or death.
WARNING: Allow the running surface to come to a complete stop prior to folding it up.
Risk of injury to persons – To avoid injury use extreme caution when stepping onto or off of a moving belt.
•
•
To disconnect, turn power OFF at the ON/OFF switch, then remove plug from electrical outlet.
Never operate a Life Fitness product if it has a damaged power cord or electrical plug, or if it has been dropped,
damaged, or even partially immersed in water. Contact Life Fitness Customer Services.
•
•
Position this product so the power cord plug is accessible to the user.
Keep the power cord away from heated surfaces. Do not pull the equipment by the power cord or use the cord
as a handle. Do not run the power cord on the floor, under or along the side of the treadmill.
•
•
If the electrical supply cord is damaged it must be replaced by the manufacturer, an authorized service agent, or
a similarly qualified person to avoid a hazard.
Do not use this product in areas where aerosol spray products are being used or where oxygen is being
administered. Such substances create the danger of combustion and explosion.
•
•
Always follow the console instructions for proper operation.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction con-
cerning use of the appliance by a person responsible for their safety.
•
•
•
Children should be supervised to ensure that they do not play with the appliance.
Do not use this product outdoors, near swimming pools, or in areas of high humidity.
Never operate a Life Fitness product with the air openings blocked. Keep air openings free of lint, hair or any
obstructing material.
•
Never insert objects into any openings in this product. If an object should drop inside, turn off the power, unplug
the power cord from the outlet and carefully retrieve it. If the item cannot be reached, contact Life Fitness
Customer Services.
•
•
Never place liquids of any type directly on the unit, except in a bottle holder or accessory tray. Lidded containers
are recommended.
When using the treadmill, wear shoes with rubber or high traction soles. Do not use shoes with heels, leather
soles, cleats or spikes. Make sure no stones are embedded in the soles. Do not use this product in bare feet.
Keep all loose clothing, shoelaces and towels away from moving parts.
•
•
Do not reach into or underneath the unit, or tip it on its side during operation.
Keep an open area of 6.5 feet (2 meters) by 3 feet (1 meter) behind the treadmill clear of any obstructions,
including walls, furniture and other equipment.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Use the handrails whenever additional stability is required. In case of emergency, such as tripping, the user
should grab the handrails and place his/her feet on the side platforms. The handrails may be held to enhance
stability as needed, but are not for continuous use.
•
•
Never walk or jog backwards on the treadmill.
Immobilize the treadmill so the motors will not run when the unit is not in use. To do this, press and hold both
the SPEED DOWN ARROW and the STOP key on the console.
•
•
•
•
Use caution when folding and unfolding the treadmill. Do not let the treadmill lower to the floor unassisted.
Guide the deck to the floor by hand.
Use this unit only for its intended use as described in this manual. Do not use attachments not recommended by
the manufacturer.
In conformity with the European Union Machinery directive 2006/42/EC, this equipment runs at sound pressure
levels below 70 dB(A) at the average operating speed of 8 km/hr.
The universal electrical grounding symbol is:
6
Download from Www.Somanuals.com. All Manuals Search And Download.
2
LIFE FITNESS TREADMILL OVERVIEW
7
Download from Www.Somanuals.com. All Manuals Search And Download.
3
ASSEMBLY
For safety, and to save time and effort, read this Owner’s Manual completely before installing your Life Fitness Treadmill.
Place the treadmill near where it will be used before beginning the unpacking procedure.
3.1 UNPACKING
These unpacking instructions assume you have already done the following:
•
•
Removed the top of the shipping carton.
Removed this Owner’s Manual from the top of the packaged material.
The best method for unpacking the rest of the treadmill is as follows:
•
•
•
•
Remove all items on top of the running belt.
Break down the sides of the inner shipping carton.
DO NOT remove or unlatch the strap that is positioned over the walking surface.
Follow assembly instructions starting on page 9.
WARNING: Fold the treadmill into the upright and locked position before rolling it over on its side or picking it up from
the floor. The base or folding frame can swing around unexpectedly if this procedure is not followed.
3.2 COMPONENT LIST & HARDWARE
Identify the following components after unpacking your treadmill:
1. Left Upright . . . . . . . . . . . . . . . . . . . . Qty: 1
2. M8 X 60MM Bolt (Silver) . . . . . . . . . . Qty: 6
3. Star Washers . . . . . . . . . . . . . . . . . . Qty: 14
4. Right Upright. . . . . . . . . . . . . . . . . . . Qty: 1
5. Console Assembly . . . . . . . . . . . . . . Qty: 1
6. M8 X 60MM Bolt (Black) . . . . . . . . . . Qty: 2
7. Handrail Left . . . . . . . . . . . . . . . . . . . Qty: 1
FLAT WASHER
STAR WASHER
8. M8 X 15MM Bolt (Black) . . . . . . . . . . Qty: 4
9. M8 X 15MM Bolt (Silver) . . . . . . . . . . Qty: 6
10. 6MM Hex Head Wrench . . . . . . . . . . Qty: 1
11. Power Cord . . . . . . . . . . . . . . . . . . . . Qty: 1
12. Emergency Stop Lanyard. . . . . . . . . Qty: 1
13. Flat Washer . . . . . . . . . . . . . . . . . . . . Qty: 4
14. Handrail Right . . . . . . . . . . . . . . . . . . Qty: 1
M8 X 15MM BOLT
M8 X 60MM BOLT
Tool Needed for Assembly:
• 6MM Hex Wrench (included)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3 INSTALLING UPRIGHTS
Locate the LEFT UPRIGHT (1). The upright is marked “L”. Position the LEFT UPRIGHT near inside of the left bracket.
a) Connect the two electrical connectors at the bottom of the upright.
b) Set the upright in position while feeding the cable into the upright.
c) Install all hardware and finger tighten at this time. Secure the LEFT UPRIGHT to the left bracket by using three
M8 X 60MM SILVER BOLTS (2) and three STAR WASHERS (3). Secure the front of the upright by installing one
M8 X 15MM SILVER BOLT (9) and one STAR WASHER (3).
CAUTION: Do not pinch the wire when attaching the left upright to the left upright bracket. Carefully feed any excess
wire into the upright tube. Connectors must be inside the upright tube after installation.
Locate the RIGHT UPRIGHT (4). The upright is marked “R”. Position the RIGHT UPRIGHT near the inside of the right
bracket. Install all hardware and finger tighten at this time. Secure the RIGHT UPRIGHT to the right bracket by using
three M8 X 60MM SILVER BOLTS (2) and three STAR WASHERS (3). Secure the front of the upright by installing one
M8 X 15MM SILVER BOLT (9) and one STAR WASHER (3).
9
Download from Www.Somanuals.com. All Manuals Search And Download.
3.4 INSTALLING THE CONSOLE ASSEMBLY
A second person, who is holding the console assembly in place, is recommended.
WARNING: Do not tip the treadmill over on its side. The base frame can swing around unexpectedly if this procedure is
not followed.
Unbuckle the strap on the top of the treadmill.
Fold the treadmill running surface up. Remove the CONSOLE ASSEMBLY (5) from under the walking belt. Fold the
treadmill running surface back down.
a) Set the console assembly into the slot on the right upright. (lower right image)
b) Connect the two electrical connectors between the LEFT UPRIGHT and the CONSOLE ASSEMBLY. Push any
excess wire into either the upright or the console assembly.
c) Set the console on top of the uprights while pushing the connectors in to the upright. The tabs on the console set
into slots on the uprights to help locate the assembly.
d) Install the four M8 X 15MM SILVER SCREWS and STAR WASHERS that hold the console to the upright. Finger
tighten the screws.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
3.5 INSTALLING THE HANDRAILS
Attach the RIGHT HANDRAIL (7). The handrails are marked “R” or “L”.
a) Slide the handrail into the tube at the console.
b) Install two M8 X 15MM BLACK SCREWS (8) with two FLAT WASHERS (13) on the top of the handrail. Finger
tighten the screws.
c) Install the M8 X 60MM BLACK SCREWS (6) and STAR WASHER (3) at the bottom of the handrail. Finger tighten
the screws.
Repeat the above procedure for the LEFT HANDRAIL (7).
3.6 TIGHTENING THE SCREWS
Use the supplied 6MM HEX WRENCH to tighten all 18 screws on the user assembly points.
3.7 ATTACHING THE POWER CORD
Insert the female plug of your treadmill’s power cord into the male outlet next to your treadmill’s power switch.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
4
SETUP
ELECTRICAL POWER REQUIREMENTS
Most Life Fitness Treadmills are intended for use on a normal 120 volt circuit in the United States and Canada. Below is
a table that provides the current rating for this product based on supply voltage. Make sure that the treadmill model
supports the proper line voltage for the installation location before plugging into the outlet. Line voltage is noted on the
product’s serial label.
Supply Voltage (VAC)
Frequency (Hz)
50 / 60
Maximum Current (Amps)
120
230
12
10
50 / 60
ELECTRICAL GROUNDING REQUIREMENTS
This Life Fitness product must be properly grounded. If the unit malfunctions or breaks down, proper grounding
provides the path of least resistance for the electric current, which reduces the risk of shock to anyone touching or using
the equipment. Each unit is equipped with an electrical cord, which includes an equipment grounding conductor and a
grounding plug. The plug must be inserted into an outlet that has been properly installed and grounded in accordance
with all local codes and ordinances. A temporary adapter must not be used to connect this plug to a two-pole receptacle
in North America. If a properly grounded, correct amperage outlet is not available, a qualified electrician must install one.
DANGER: A risk of electrical shock may result from improper connection of the equipment’s grounding conductor. Check
with a qualified electrician if you are unsure about proper grounding techniques. Do not modify the plug provided with
this product. If it will not fit an electrical outlet, have a proper outlet installed by a qualified electrician.
TURNING THE UNIT ON
To turn the treadmill on, locate the ON/OFF power switch at the front of the treadmill near the power cord and turn it ON.
HOW TO STABILIZE THE LIFE FITNESS TREADMILL
After placing the unit where it will be used, check its stability. If
there is even a slight rocking motion or the unit is not stable,
determine which stabilizing leg is not resting on the floor. To
adjust, turn the STABILIZING LEG (A) or (B) until the rocking
motion ceases and both stabilizing legs rest firmly on the floor.
Note: If excessive vibration occurs during use, adjust the height
of the levelers (A) closer to the uprights. Do not adjust the height
of the levelers (B) further from the uprights.
Note: It is extremely important that the stabilizing leg be correctly
adjusted for proper operation.
CHECKING THE BELT
After the treadmill has been installed and stabilized, the belt must
be checked to confirm proper tracking. First, ensure the power
cord is plugged into a suitable outlet, as described in the above
Electrical Requirements section. Then turn the treadmill on.
9 mm
Stand on the side rails of the treadmill and straddle the belt.
To start the belt, press the WALK key, then press the
18 mm
SPEED UP arrow key until the treadmill reaches 4.0 mph/
6.4 kph. If the striding belt appears off-center, see the instruc-
tions in Tracking (Centering) An Existing Or New Striding Belt
(Section 11.2).
Note: Normal belt operating position is for the belt to be located
within the belt travel position indicators on the motor cover (see
illustration to the right). If the belt is not in this position, see
Section 11.2
12
Download from Www.Somanuals.com. All Manuals Search And Download.
FOLDING AND UNFOLDING THE TREADMILL
The treadmill’s deck can be folded up when not in use. To do so, make sure that the incline is set to 0%, then simply
grab the deck and lift it until it locks into place. To lower the deck again, while pushing the running surface with one hand
pull the release handle and slowly lower it to the ground. Make sure the deck is completely lowered before using the
treadmill.
POWER SWITCH
Located on the front panel at the base of the treadmill, the ON/OFF switch has two positions - "I" (one) for ON and "0"
(zero) for OFF.
MOVING THE TREADMILL
Turn the treadmill off and disconnect its power cord, then raise its deck.
Note: If adjustments were made to the front levelers during setup, make sure to tighten the levelers snug against the
base frame before moving.
The treadmill may now be moved on its front platform wheels by pushing and pulling on its handrails. Do not attempt to
move the treadmill by pushing or pulling on the deck or deck support tubing.
IMMOBILIZING THE TREADMILL
When it is necessary to immobilize the treadmill, press and hold both the SPEED DOWN ARROW and the STOP keys
on the console. Use the same key sequence to mobilize the treadmill.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
5
CONSOLE AND ACTIVITY ZONE OVERVIEW
A. Accessory Trays and Water Bottle Holders are located on either side of the display console.
B. Energy Saver On / Off: The Energy Saver mode is used to minimize the power being pulled from the wall when the
treadmill is not in use. The treadmill will automatically go into Energy Saver mode after ending a workout. Press the
ENERGY SAVER button to either “wake up” the treadmill or put it into the Energy Saver mode. Energy Saver can be
turned off in the Settings menu. An indicator LED will flash while in Energy Saver mode.
C. Virtual Trainer: The USB port is used to upload goal-based programs and customized workouts from
www.LifeFitnessvirtualtrainer.com. For more information on Virtual Trainer, see Section 8.
D. Reset: Use the RESET Button as a delete key when entering workout data. Press the Reset button 3 times to exit
any workout.
E. Enter: Use this key when entering data during workout set up.
F. Navigation: Use this button for forward, back, up, and down navigation during workout or console set up as well
as incline, time, and speed workout adjustments. While setting up a workout use the LEFT / RIGHT arrows to scroll
through workout setup options, and then use the UP / DOWN arrows to adjust the values. During a workout, use the
LEFT / RIGHT arrows to adjust the workout difficulty level or HR Target in HR Programs. Use the UP / DOWN arrows to
adjust time.
G. Settings: Press this button to enter a menu where the treadmill settings can be adjusted.
H. Workout Selection: Select one of the following workouts by pressing the corresponding button: USB (Virtual
Trainer), Manual, Random, Hill, Fat Burn, Cardio, or Fit Test and begin workout set-up (see Workout Overviews for a
complete description).
®
®
I. Reading Rack: Users can place Kindles , iPads , books, magazines or other reading devices on the built-in
reading rack.
®
J. iPod Docking Station: Users can dock, control, and charge their iPods during workouts. (See K. iPod Controls). An
®
extra iPod pad was included with the treadmill. Set the pad behind smaller iPod players when they are docked. You
may need to remove the protective case from your device to dock properly. A protective clip may be present on the
iPod connector. Remove prior to docking.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
ACTIVITY ZONE
K. IPOD CONTROLS: Use these keys to play/pause, skip back, skip forward, decrease volume, and increase volume.
1. You must plug your headphones into the treadmill’s headphone jack (L) for the volume controls on the treadmill
to function.
2. All the controls on your iPod will still be active when docked to the treadmill except the volume control.
3. The volume level is always set to ‘Low’ when an iPod is docked into the treadmill.
L. Headphone Jack: Plug headphones into the jack to hear your docked iPod.
M. Quick Start (Walk, Jog, Run): Press one of the Quick Start keys prior to a workout to have the treadmill belt begin
moving at a preset value. The preset values are 2 mph / 3.2 kph (Walk), 4 mph / 6.4 kph (Jog), and 6 mph / 9.7 kph
(Run). During a workout, press these buttons to immediately change the belt speed to the preset value. The user
can customize the preset speeds by pressing the SPEED UP / DOWN arrow keys and holding the Walk, Jog, Run
button for 5 seconds to set the displayed speed to the button they are pressing and holding.
N. Incline Up / Down: Use the INCLINE UP / DOWN arrow keys to change the incline of the belt by increments of
0.5% with each press of the arrows
O. Speed Up / Down: Use the SPEED UP / DOWN arrow keys to change the speed of the belt by increments of 0.1
mph with each press of the arrows.
P. Pause / Resume: Press this key once during a workout to pause the workout. Press the key again to resume the
workout. After a Pause, the treadmill speed shall be 0.5mph (0.8kph). The pause time is set for 5 minutes. The
display counts down from 5:00 as soon as the PAUSE key is pressed. If the treadmill is not resumed from ‘Pause’
the treadmill will go into ‘Power Save’ Mode.
Q. Stop: Press once to display workout information. Press two times to reset the workout.
R. Emergency Stop Magnet: This magnet is part of the E-Stop Lanyard. The lanyard is a safety feature which must be
clipped to the user's clothing when the treadmill is in use. Then should the user stumble or fall, the lanyard will dis-
connect from the Activity Zone, stopping the treadmill's belt and resetting the console. To reset the system, simply
reconnect the lanyard magnet to the Activity Zone. If the E-Stop lanyard is pulled, the treadmill will not show a work-
out summary to save to the USB.
S. Heart Rate Sensors: The hand pulse sensors are the built-in heart rate monitoring system on the treadmill. During
a workout, grasp the sensors that are set into the handlebars. For an accurate reading, use a comfortable grip. The
console displays the heart rate after 15 to 20 seconds.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
6
CONSOLE DISPLAYS
The console display was designed to reduce toggling between workout information. The design of each button on the
treadmill’s console was designed to give the user tactile feedback. Each piece of workout feedback, including incline,
time, speed, heart rate, calories and distance has its own dedicated window.
1. USB
The USB icon on the left side of the MESSAGE CENTER is displayed whenever a USB drive is plugged in. The USB
can execute a workout from www.Lifefitnessvirtualtrainer.com. See section 8 for more information on the Life Fitness
Virtual Trainer Website.
2. Message Center
The message center provides instructional information to the user. The message center will coach the user through
setting up a workout, including selecting a workout and entering time, incline, and other workout specific information.
Also during the workout if certain workout feedback like pace is turned on in the Settings Menu, the message center
will periodically show that information.
®
3. iPOD
The iPod icon on the right side of the MESSAGE CENTER is displayed when a compatible iPod is docked.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Heart Rate Center
Heart Rate Display
The heart rate display calculates the user’s actual heart rate in contractions or beats per minute during a workout. The
user must be holding on to the contact heart rate electrodes or wearing a heart rate telemetry chest strap for the heart
rate display to function. See Heart Rate Telemetry Chest Strap. Life Fitness recommends wearing the chest strap for
the most accurate heart rate reading. If you are experiencing problems with your contact heart rate reading please
read the section titled Contact Heart Rate for recommendations on improving the contact heart rate reading.
Target Heart Rate Display
Target heart rate is a percentage of a user’s maximum heart rate. The goal is to target a range that enables one’s heart
and lungs to receive the most benefit from a workout. The console calculates target heart rate by taking the maximum
heart rate (220 minus the user’s age) and multiplying it by an intensity level. Life Fitness intensity levels are 65% for
weight loss and fat burning and 80% for improving cardiovascular endurance. The display will toggle between the 65%
and 80% intensity levels. An arrow pointing up or down will illuminate to show when the user’s actual heart rate is
above or below the target heart rate.
Example: User’s Age is 45. 220 – 45 = 175. 175 is the Maximum Heart Rate for a 45 year old. 175 x 65% = 114.
114 is the optimal target heart rate for weight loss and fat burning.
5. Workout Profile Display
The workout profile graphically displays the intensity of a workout with columns of various heights. During the work-
out the current intensity level the user is in is signified by an arrow located above the appropriate column.
During a heart rate workout the workout profile acts like a graph of the user’s target heart rate percent. Each of the 9
rows of the profile will represent the user’s actual heart rate as a percentage of their heart rate max. Therefore by the
end of the workout, the user will be able to visually see their target heart rate ranges throughout the workout.
Target Heart Rate
Percent Range
Row
1
2
3
4
5
6
7
8
9
20 - 29%
30 - 39%
40 - 49%
50 - 59%
60 - 69%
70 - 79%
80 - 89%
90 - 99 %
100%
Note: The percent in the table represents the user’s actual heart rate as a percent of their heart rate max. The heart
rate max is 220-user’s age. For example: A 40 year old’s heart rate max would be 220-40 = 180. During their work-
out at the first interval their actual heart was 100. Therefore 100/180 = 0.56 or 56% and the profile would display the
user at row 4 for the first interval of the workout.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Results Center
Distance Display
Distance is shown in miles or kilometers in the Results Center. The distance formula tries to replicate miles as if the
exercise was being conducted outdoors. The distance formula will not always be consistent with other Life Fitness
products or other manufacturer’s products. Distance can be set to kilometers or miles. See Settings Menu.
Calorie Display
A calorie is a unit used to measure energy. It represents the amount of energy obtained from food. One calorie is
approximately enough energy to increase the temperature of 1 gram of water by 1 degree Celsius. The console
calculates an average caloric burn based on a Life Fitness proprietary calorie equation. This formula may not
match other manufacturer’s machines or other Life Fitness machines. This window can be switched to show Watts.
Please see instructions in the Settings Menu section.
7. Incline Display
There are two types of levels used on Life Fitness treadmills. Users can adjust the current time segment and incline
percentage during RANDOM, HILL, HEART RATE, or VIRTUAL TRAINER workouts. The first difficulty level corre-
sponds to a range of actual incline percentages. Difficulty levels are used in RANDOM, HILL, HEART RATE, and
VIRTUAL TRAINER workouts. So when a user selects a difficulty level of 10 it corresponds to a range of incline
percentages between 3%–7%. During RANDOM and HILL the difficulty level will be displayed only during workout
setup. At all other times during these workouts the incline percentage is displayed. See the table below. The second
type of level is an incline level or percentage. The incline level is manually adjusted by the user in a MANUAL work-
out. The range of possible incline percentages is 0 –12% and can be adjusted in 0.5% increments.
Difficulty Level
Incline Level
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
8.0 - 12.0
7.5 - 11.5
7.0 - 11.0
6.5 - 10.5
6.0 - 10.0
5.5 - 9.5
5.0 - 9.0
4.5 - 8.5
4.0 - 8.0
3.5 - 7.5
3.0 - 7.0
2.5 - 6.5
2.0 - 6.0
1.5 - 5.5
1.0 - 5.0
0.5 - 4.5
0.0 - 4.0
0.0 - 3.0
0.0 - 2.0
0.0 - 1.0
Note: Adjusts in 0.5% increments
Note: Adjusts in 0.5% increments
Note: Adjusts in 0.5% increments
Note: Adjusts in 0.5% increments
Note: Adjusts in 0.5% increments
Note: Adjusts in 0.5% increments
Note: Adjusts in 0.5% increments
Note: Adjusts in 0.5% increments
Note: Adjusts in 0.5% increments
Note: Adjusts in 0.5% increments
Note: Adjusts in 0.5% increments
Note: Adjusts in 0.5% increments
Note: Adjusts in 0.5% increments
Note: Adjusts in 0.5% increments
Note: Adjusts in 0.5% increments
Note: Adjusts in 0.5% increments
Note: Adjusts in 0.5% increments
Note: Adjusts in 0.3% increments
Note: Adjusts in 0.15% increments
Note: Adjusts in 0.1% increments
8. Time Display
The time window displays the total workout time set by the user during workout setup, which is a range from 99 to 1
minute depending on the program. During the workout, time will count down from total workout time. The time set
can be changed at any time during the workout with the up and down arrows.
9. Speed Display
Speed is displayed in miles per hour (MPH) or kilometers per hour (KPH). The formula tries to replicate miles per
hour as if the exercise was being conducted outdoors. The speed range is 0.5 mph (0.8 kph) to 10.0 mph (16 kph)
and is adjustable in increments of 0.1 mph. Speed units can be displayed in MPH or KPH by using the Settings
Menu. See Settings Menu.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
7
WORKOUT OVERVIEWS
Six workouts are pre-programmed for the Life Fitness Treadmill. Each workout has a different goal. Read the workout
descriptions carefully so that you can develop a workout routine that focuses on reaching your specific goals.
Note: The Virtual Trainer USB port gives you the ability to download and customize over 40 workouts. You can get
recommended workout programs based on your individual goals. Visit www.LifeFitnessvirtualtrainer.com for free
access. See how to use Virtual Trainer in section 8.
The workout descriptions on the following pages all have headers labeled Beginner-Just Starting, Experienced-Fit, and
Advanced – Athlete. Beginner workouts are workouts designed for users just starting to workout or just starting a work-
out routine. Beginner workouts have limited gradual intensity adjustments. Experienced workouts are designed for users
seeking a more challenging workout. These users should have a stronger fitness base. Advanced workouts are designed
for athletes training for cardiovascular endurance and special events.
Different workouts have different setup steps. This section provides details on the steps themselves.
WORKOUT PROFILE
To start a workout, select one of the six pre-programmed workout buttons on the right side
of the console, or plug in your USB and select the USB workout button.
When a workout is selected, the MESSAGE CENTER will display the first workout set-up
step and show the current value for the set-up parameters. Throughout the workout setup
process, use the UP / DOWN arrows on the NAVIGATION BUTTON to adjust the value that
is selected. Use the LEFT / RIGHT arrows on the NAVIGATION BUTTON to scroll back and
forth between different steps. In order to advance to the next step, either press the RIGHT
arrow or ENTER key. After entering the last step, press ENTER to begin the workout.
QUICK START workouts are the fastest way to begin exercising, and it bypasses the steps involved in selecting a
specific workout program. Begin a QUICK START workout by pressing the WALK, JOG, or RUN buttons on the Activity
Zone. After the WALK, JOG, or RUN key is pressed, a MANUAL workout begins immediately at the pre-programmed
speed for the respective key pressed. While in this MANUAL workout, the user may at any time toggle between the
three pre-programmed speeds: Walk (2 mph / 3.2 kph), Jog (4 mph / 6.4 kph), and Run (6 mph / 9.7 kph). The target
heart rate will not be displayed during a QUICK START workout.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
MANUAL WORKOUT (Beginner – Just Starting)
Access: This workout can be started by pressing the MANUAL workout key.
Description: The MANUAL workout is a simple workout that has no pre-defined
intensity levels. The MANUAL workout starts the user at 0.5 MPH and 0% incline.
The user is in complete control of speed and incline settings.
Goal: This workout was designed for users that do not have much experience work-
ing out on a product and like to have control of the level and speed/incline settings.
RANDOM WORKOUT (Experienced – Fit)
Access: This workout can be started by pressing the RANDOM workout key.
Description: In this workout, the console creates a terrain of different hills and
valleys. Over 1 million different patterns are possible. The RANDOM workout uses
incline adjustments to create hills/valleys. Speed is controlled by the user.
Goal: This workout was designed to provide the end-user with unlimited workout
variety. The goal of this workout is to prevent workout boredom and improve
motivation.
HILL WORKOUT (Experienced – Fit)
Access: This workout can be started by pressing the HILL workout key.
Description: The Life Fitness patented hill workout is an interval training workout.
Intervals are periods of intense aerobic exercise. The workout profile window displays
the levels of the intervals, which together have the appearance of hills and valleys.
Incline adjustments are used to simulate the hills/valleys, speed is controlled by the
user.
The HILL workout has two main phases in between the warm-up and cool down.
Plateau: Increases the incline slightly and keeps it steady, to bring the heart rate to the low end of the target
zone.
Interval Training: Is a series of increasingly steeper hills, alternating with valleys, or periods of recovery. The
heart rate should rise to the high end of the target zone during this segment.
Goal: The computerized interval training workout has been scientifically demonstrated to promote greater cardio-
respiratory improvement than steady-pace training. The goal of this workout is to improve cardiovascular endurance
and break through fitness plateaus.
FAT BURN WORKOUT * (Beginner – Just Starting)
*Chest strap must be worn to execute the workout
Access: This workout can be started by pressing the FAT BURN workout key.
Description: The user must wear a chest strap for this workout to function properly.
This program uses incline adjustments to increase and decrease heart rate. FAT
BURN maintains the user at 65% of the user’s theoretical maximum heart rate. The
console continuously monitors and displays the heart rate, adjusting the intensity
level of the product to reach and maintain a target heart rate range. The intensity
will not change as long as the user is between 60%-72% of their target heart rate.
If the user’s heart rate cannot reach the target using incline, a message will appear in the MESSAGE CENTER
requesting the user to change speed.
Goal: The goal of the FAT BURN workout is to efficiently burn fat by eliminating over-training and under-training and
also maximizing the aerobic benefits of exercise by using the body’s fat stores for energy.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
CARDIO WORKOUT * (Experienced – Fit)
*Chest strap must be worn to execute the workout
Access: This workout can be started by pressing the CARDIO workout key.
Description: The user must wear a chest strap for this workout to function properly.
This program uses incline adjustments to increase and decrease heart rate. CARDIO
maintains the user at 80% of the user’s theoretical maximum heart rate. The console
continuously monitors and displays the heart rate, adjusting the intensity level of the
product to reach and maintain the target heart rate range. The intensity will not
change as long as the user is between 72%-85% of their target heart rate.
If the user’s heart rate cannot reach the target using incline, a message in the
MESSAGE CENTER will appear requesting the user to change speed.
Goal: The goal of the CARDIO workout is to place a heavier workload on the heart muscle to emphasize
cardiovascular endurance.
FIT TEST (All levels)
Access: This workout can be started by pressing the FIT TEST workout key.
Description: The FIT TEST workout estimates cardiovascular fitness and can be used to monitor improvements in
endurance every four to six weeks. The user must wear a telemetry heart rate chest strap as the test score
calculation is based on a heart rate reading. The workout duration will be five minutes at a 5% incline. Immediately
afterward, the console will take the user's heart rate reading, calculate a fitness score and display the score in the
MESSAGE CENTER.
The Fit Test is considered to be a submax VO (volume of oxygen) test. It gauges how well the heart supplies
2
oxygenated blood to the exercising muscles and how efficiently those muscles receive oxygen from the blood.
Physicians and exercise physiologists generally regard this test as a good measure of aerobic capacity.
Goal: The goal of the FIT TEST workout is to elevate the user’s hear rate to a level that is between 60% - 85% of
their theoretical maximum heart rate.
Suggested Exertion Levels
Inactive
Active
Very Active
2-3 mph
3-4 mph
3.5-4.5 mph
Treadmill Fit Test Level
3.2-4.8 kph
4.8-6.4 kph
5.6-7.2 kph
Note: Treadmill will incline to 5% after a one minute warm-up.
Within each suggested range, these additional guidelines can be used:
Lower Half of Range Upper Half of Range
higher age
lower weight
short
lower age
higher weight*
taller
* In cases of excessive weight, use lower half of range
The treadmill will not accept:
•
•
•
•
heart rates less than 52 or greater than 200 beats per minute
body weights less than 75 pounds (34 kg) or greater than 400 pounds (181 kg)
ages below 10 or over 99 years
data input that exceeds human potential
21
Download from Www.Somanuals.com. All Manuals Search And Download.
If you make an error when entering any Fit Test data, you can correct it by using the back arrow, inputting the correct
information, and pressing ENTER. Once the test starts, you cannot change the workout time or speed. Use the STOP,
RESET, SPEEDUP, SPEED DOWN, or PAUSE key to terminate the test.
It is important for you to take the Fit Test under similar circumstances each time. Your heart rate is dependent on many
factors, including:
•
•
•
•
amount of sleep the previous night (at least seven hours is recommended)
time of day
time you last ate (two to four hours after the last meal is recommended)
time since you last drank a liquid containing caffeine or alcohol, or smoked a cigarette
(at least four hours is recommended)
•
time since you last exercised (at least six hours is recommended)
For the most accurate Fit Test results, you should perform the Fit Test on three consecutive days and average the three
scores.
NOTE: To receive a proper Fit Test score, the work done must be within a training heart rate zone that is 60 percent to
85 percent of the theoretical maximum heart rate (HRmax). This rate is defined by the American College of Sports
Medicine's "Guidelines for Exercise Testing and Prescription" as equal to 220 minus an individual's age.
The tables below list fit test results.
RELATIVE FITNESS CLASSIFICATION FOR MEN
Men
Estimated VO Max (ml/kg/min) Per Age Category
2
Rating
Elite
Excellent
Very Good
Above Average
Average
10 - 29
55+
30 - 39
53+
40 - 49
51+
50 - 59
47+
60+
43+
53 - 54
50 - 52
45 - 49
41 - 44
38 - 40
35 - 37
<35
50 - 52
48 - 49
43 - 47
38 - 42
36 - 37
34 - 35
<34
49 - 50
46 - 48
42 - 45
37 - 41
34 - 36
32 - 33
<32
45 - 46
43 - 44
39 - 42
34 - 38
32 - 33
29 - 31
<29
41 - 42
39 -40
35 - 38
31 - 34
29 - 30
26 - 28
<26
Below Average
Low
Very Low
RELATIVE FITNESS CLASSIFICATION FOR WOMEN
Women
Estimated VO Max (ml/kg/min) Per Age Category
2
Rating
Elite
Excellent
Very Good
Above Average
Average
10 - 29
47+
30 - 39
44+
40 - 49
42+
50 - 59
37+
60+
35+
45 - 46
43 - 44
38 - 42
33 - 37
31 - 32
28 - 30
<28
42 - 43
40 - 41
36 - 39
31 - 35
29 - 30
27 - 28
<27
40 - 41
38 - 39
34 - 37
30 - 33
28 - 29
25 - 27
<25
35 - 36
33 - 34
30 - 32
26 - 29
24 - 25
22 - 23
<22
33 - 34
31 - 32
27 - 30
24 - 26
22 - 23
20 - 21
<20
Below Average
Low
Very Low
Life Fitness developed this rating scale based on VO max percentile distributions referenced in American College
2
of Sports Medicine's "Guidelines for Exercise Testing and Prescription" (7th Ed. 2006), which were obtained from the
data collected by the Cooper Institute Aerobics Center Longitudinal Study, 1970 - 2002. It is designed to provide a
qualitative description of a user's VO max estimation, and a means of assessing initial fitness level and tracking
2
improvement.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
8
VIRTUAL TRAINER
The Life Fitness Virtual Trainer is a unique website that allows you to create your favorite workouts anytime, anywhere
and also gives you access to the same workouts you use on Life Fitness treadmills in health clubs, hotels or recreation
centers. Take advantage of these features and maximize your workout time. The workouts you create on the website
can be downloaded and saved to any USB drive. Simply plug in your USB stick to your treadmill and begin your favorite
workout instantly.
1. Download & Save Workouts: Choose one of the following two options to get started: “Create Popular Workouts” or
“Create Personalized Workouts”.
2. After you have saved your workout, plug in the USB into the USB port on the equipment and begin your workout.
3. Upload Your Saved Workout Results: Upload the results of your workouts from your USB stick to the website.
Thousands of users upload their workout results regularly in order to track their progress. To use this feature, simply
click on the UPLOAD RESULTS button to view a list of most recent workout results on your USB and choose the
once you wish to upload.
4. Track Your Progress: If you have uploaded workout results, clicking on TRACK PROGRESS button will display a
graph showing your progress during the past month. You can easily adjust the start and end dates to check progress
during periods of your choice.
How to begin a workout from your USB:
Step 1: Plug in your USB into the Virtual Trainer USB port (see page 14).
Step 2: Select the USB button in the Workout Selection area (see page 14).
Step 3: Workouts saved to your USB will appear in the message center of the console; use the arrows on the console to
scroll to your desired program. Select ENTER.
Step 4: Begin your Virtual Trainer workout.
How to save your treadmill workout data onto your USB:
1. You must either have a USB inserted into the treadmill port or you must insert the USB stick within 5 minutes of the
workout ending and “Workout Summary” displayed on the console.
2. The console will direct you to press the “USB” button to save the data.
3. The console will confirm once the data is saved.
Note: if you press ENTER, RESET, or pull the emergency stop prior to saving the data, the data will be lost.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
9
HEART RATE ZONE TRAINING® EXERCISE
9.1 WHY HEART RATE ZONE TRAINING® EXERCISE?
Research shows that maintaining a specific heart rate while exercising is the optimal way to
monitor the intensity of a workout and to achieve maximum results. That is the idea behind the
®
Life Fitness Heart Rate Zone Training approach to exercise. Zone Training identifies an
exerciser's ideal heart rate range, or zone, for burning fat or increasing cardiovascular fitness.
The zone is a percentage of the theoretical maximum(HRmax), and its value depends on the
workout. This Life Fitness Treadmill features two exclusive workouts designed to take full
advantage of the benefits of Heart Rate Zone Training+ exercise:
• FAT BURN
• CARDIO
Each workout offers different benefits, as discussed in Workout Overviews.
Note: Consulting a fitness trainer is recommended for defining specific fitness goals and
designing a workout program.
To change the target heart rate during a workout, simply enter a new target heart rate using
the NUMERIC keypad. To switch between programs during a workout, use the WORKOUT
®
SELECTION keys. The Heart Rate Zone Training workout programs measure heart rate.
TM
Wear the telemetry chest strap, or grip the Lifepulse sensors, to enable the treadmill’s
on-board computer to monitor the heart rate during a workout. The computer automatically
adjusts the incline level to maintain the target heart rate based on the actual heart rate.
THE HEART RATE TELEMETRY CHEST STRAP
The console is equipped with a wireless heart rate monitoring system in which electrodes, pressed against the skin, trans-
fer heart rate signals from the user to the console. The electrodes are inside the chest strap (A) that the user wears during
the workout. The transmitter strap delivers an optimal heart rate reading when the electrodes are in direct contact with the
skin, or a thin layer of wet clothing. The electrodes are two grooved surfaces on the underside of the strap, and must
remain wet to accurately transmit the electrical impulses of the heart back to the receiver. To use, first moisten the elec-
trodes. Then, secure the strap as high under the chest muscles as possible. The strap should be snug, but comfortable
enough to allow for normal breathing. Electrodes must be wet to work properly. If it becomes necessary to re-moisten,
grasp the center of the strap, pull it away from your chest to expose the electrodes, and moisten. See diagram below for
correct positioning of the strap.
Note: Using the wireless chest strap will provide more accurate heart rate readings than the hand pulse sensors.
Note: To ensure the highest performance, use the wireless chest strap that was provided with the product.
CONTACT HEART RATE
When using Contact Heart Rate make certain to grasp sensors firmly and keep hands still. If heart rate seems substantial-
ly higher or lower than expected, remove hands from sensors until heart rate disappears. Dry hands and grasp sensors
again until heart rate seems accurate. If this does not work you may need to slow the machine to get an accurate reading.
Life Fitness recommends for safety and accurate heart rate readings that the user stand on the side rails when attempting
to monitor heart rate with contact electrodes.
Note: The contact heart rate system may be less or more accurate with different individuals.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
10
SETTINGS MENU
10.1 SETTINGS
The Settings menu can be accessed by pressing the SETTINGS Key when in the SELECT WORKOUT screen.
Upon entering the Settings menu, the screen will display “SETTINGS MENU”.
•
•
•
•
Scroll through the Settings options using the NAVIGATION BUTTONS.
Adjust the Settings items with the UP and DOWN arrow keys.
Use the ENTER key or LEFT / RIGHT arrow keys to save modifications and move to the next option.
Use the RESET key to exit the Settings menu.
10.2 SETTINGS MENU STATES AND SELECTION OPTIONS
1. Units
•
•
Changes the unit of measure for speed and distance.
Selection options are: ENGLISH (miles and miles per hour) or METRIC (kilometers or kilometers per hour).
2. Set Time
•
Set the date and time plus the time zone for workout tracking on the Life Fitness Virtual Trainer web site. Date
and time are your local time. Time Zone is based on your location compared to Greenwich Mean Time.
Major Cities
London
New York City
Minneapolis
Los Angeles
Hong Kong
Berlin
Time Zone Values
0
-4
-5
-7
+8
+2
Time is only used for Virtual trainer data transfer
through the USB.
3. Beeps
•
•
Turns ON or OFF the audio feedback.
Selection options are: ON or OFF.
4. Pace
•
•
Turns ON or OFF the Pace display in the message center.
Selection options are: ON or OFF.
5. Statistics
•
•
Shows the total hours and distance accumulated on the treadmill.
Press ENTER to show statistics.
6. Software Version
•
•
Shows the software version and part number.
Press ENTER to show software version and build date.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Brightness
•
•
Changes the intensity of the display backlight LED’s.
Brightness Range is 1 - 10.
8. Contrast
•
•
Changes the contrast of the display.
Contrast Range is 1 - 99.
9. Wireless Heart Rate
•
•
Turns ON or OFF the telemetry heart rate receiver.
Selection options are: ON or OFF.
10. Floor Model
•
•
Controls the ability for the treadmill to enter Energy Saver; Floor model ON turns off the Energy Saver feature.
Selection options are: ON or OFF.
11. Belt Lube Timer
•
Tracks the total hours of workout and cool down time since the last belt lubrication. When the timer reaches 75
hours it triggers a reminder message during every workout.
•
Press and hold the DOWN arrow key for 5 seconds to reset the time.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
11 SERVICE AND TECHNICAL DATA
11.1 TROUBLESHOOTING
Problem
Cause / Solution
You may be in “Energy Saver Mode”. Press the “Energy Saver” button to
see if console turns on.
Check to see if the treadmill is plugged in and if the ON/OFF switch is on.
If the ON/OFF switch is not lit verify that the treadmill power cord is not
damaged and the wall outlet is functioning (tripped breaker in house).
The treadmill console does not turn
on when the ON/OFF switch is
turned on.
If the ON/OFF switch is lit verify that all the customer assembly connec-
tions are working properly. Unplug and re-plug each connection to verify.
Look to see if any of the cables were pinched during assembly.
1. Do not tighten the screws until the uprights, console and handrails
are all installed.
2. Check the screw threads for any damage.
3. Tighten the hardware after all components are installed.
I am having problems bolting the parts
together when assembling the unit.
1. Turn the treadmill OFF. Make sure all assembly hardware is tightened.
2. If shaking still occurs, adjust the levelers under the stationary frame
until the shaking decreases. See How to Stabilize the Life Fitness
Treadmill.
The treadmill shakes a lot when I run
on it.
Be sure to grasp the sensors firmly and keep hands still. If heart rate
seems substantially higher or lower than expected, remove hands from
sensors until heart rate disappears. Life Fitness recommends that the
user stand on the side rails when attempting to monitor heart rate with
contact sensors.
The contact heart rate sensors are not
reading my heart rate correctly.
Tips for contact heart rate:
1. Dry hands to prevent slipping on the sensors.
2. Apply hands to all four sensors (two in each hand).
3. Grasp the sensors firmly.
4. Apply constant pressure to the sensors.
The running belt is tracking to the left
or right.
See How to Adjust and Tension the Striding Belt.
You may need to tighten the walking belt. See How to Adjust and Tension
the Striding Belt.
The belt seems to slip when I run on it.
The treadmill will not lock when I fold
it up.
The treadmill must be at 0% incline before folding it up. If the incline is
not at 0% the treadmill will not lock.
Make sure that you pull the release lever located on the top left side of
the deck. You may need to push up on the folded part of the treadmill
while pulling the lever to help release the locking pin.
The treadmill will not unfold.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Cause / Solution
Problem
Try unplugging the
The console may not have recognized the USB stick.
USB stick and plugging it back in.
When I try to save a workout on the
USB stick I receive the following
The USB stick may be full.
VE SEE
message: UNABLE TO SA
atible with the product.
The USB stick may not be comp
MANUAL.
stick.
Try using a different USB
Potential reasons for the wireless heart rate not to work properly include:
1. The wireless heart rate is turned OFF in the Settings Menu. Enter the
HR is turned ON.
Settings Menu and verify that WIRELESS
2. There is poor contact between the telemetry heart rate strap and the
elemetry Strap for details.
skin. Refer to Heart Rate T
3. There is electrical interference from electrical appliances with the
The wireless heart rate is not
working.
s, kitchen appliances,
telemetry heart rate strap from fluorescent light
etc. Move the treadmill to a dif
ferent location or move electrical
appliances away from the treadmill.
Telemetry Strap needs to be replaced.
4. The battery in the Heart Rate
The battery is a CR2032 (3V).
able
Use of personal electronic devices, such as cell phones and port
mp3 players, causes external noise interference.
A heart rate reading is initially
detected and functioning normally
but then is lost.
Equipment is in close proximity to other sources of noise such as audio/
age/high current
video equipment, fans, two way radios, and high volt
power line
Remove the source of noise or reposition the exercise equipment.
This message relates to a problem with the Incline system.
If the incline has been repeatedly moved up and down in a manual
program, the lift motor may have activated a thermal protection device.
.
“OFF” is displayed in the incline window
.
Simply let the treadmill sit for 30 minutes and cycle power
tware. Press the
The treadmill has been immobilized through sof
.
“Immobilized” is displayed in window
OP to exit this state.
SPEED DOWN ARROW and ST
This is displayed if your version of the iPod Player is not supported by
the treadmill.
iPod is not recognized.
It may also be displayed if the connector on the treadmill or iPod
is damaged.
This
Your iPod will not charge if the treadmill enters Energy Saver mode.
is normal.
iPod is not charging while in
Energy Saver mode.
s the real time clock
The console has an internal battery that keep
This real time clock is only
functioning if the treadmill is unplugged.
irtual Trainer” website. You do
needed if you use the Life Fitness ”V
”Low Battery” message is displayed
on the console.
act
not need to replace the battery if you do not use the website. Cont
. The
Customer Service for guidance on how to change the battery
battery is a CR1632 (3V).
28
Download from Www.Somanuals.com. All Manuals Search And Download.
11.2 HOW TO ADJUST AND TENSION THE STRIDING BELT
Do not move the treadmill or place hands under the treadmill while it is plugged into an electrical outlet!
Tool Required: 6MM Hex Key Wrench
THE BELT TENSIONING BOLTS
The Life Fitness treadmill has access holes in the rear roller guards, which allow access to the tensioning bolts. These
tensioning bolts make it possible to adjust tracking and centering of the striding belt (A) without removing the guards.
Note: It is extremely important that the treadmill be correctly leveled prior to any tracking adjustments. An unstable unit
may cause striding belt misalignment. See How To Stabilize the Life Fitness Treadmill prior to attempting any rear roller
adjustments.
Before proceeding, it is helpful to visualize the REAR ROLLER (B) pivot point (C). Each adjustment made to one side of
the ROLLER must be met with an equal and opposite adjustment (D) to the other side of the ROLLER to maintain an
ideal belt tension at the pivot point.
TRACKING (CENTERING) AN EXISTING OR NEW STRIDING BELT
1. Locate the two access holes to the BELT TENSIONING BOLTS (D) on each of the rear roller guards.
2. Stand on the sides of the treadmill and straddle the belt. Enter the MANUAL Workout and set the belt speed to run
at 4.0 mph (6.4 kph).
3. If the striding belt has moved to the right, turn the right tension bolt 1/4 turn
clockwise with the provided 6MM Hex Key Wrench, and then turn the left
tension bolt 1/4 turn counter-clockwise to start striding belt tracking back to
center of roller.
4. If the striding belt has moved to the left, turn the left tension bolt 1/4 turn
clockwise and then turn the right tension bolt 1/4 turn counter-clockwise to
start striding belt tracking back to center of roller. Repeat adjustments until
the striding belt appears centered. Allow the machine to continue running
for several minutes to observe if tracking remains stabilized.
D
Note: Do not exceed one full turn of the adjusting screws in either direction. If
D
after one full turn the belt does not track properly, contact Customer Support
Services.
TENSIONING AN EXISTING STRIDING BELT
Under normal usage, the treadmill striding belt may stretch slightly. If the belt starts to slip during use, take the steps
listed below to correct the tension.
1. Using the STOP key, stop the treadmill.
2. Turn the belt tensioning bolts clockwise a quarter-turn per side to tension the belt. Do not exceed one full turn (four
quarter-turns per side).
3. Set the treadmill at 2.0-mph (3.2 kph) and get on to make sure the belt no longer slips. Also, check the striding belt’s
tracking. If the striding belt drifts to the left or right see Tracking (Centering) an Existing or New Striding Belt.
Note: Do not overtighten the tensioning bolts while making belt adjustments. Overtightening of bolts may over stretch
and damage the striding belt or roller bearings. Do not exceed one full turn of either bolt in either direction.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
11.3 PREVENTIVE MAINTENANCE TIPS
The Life Fitness Treadmill is backed by the engineering excellence and reliability of Life Fitness and is one of the most
rugged and trouble-free pieces of exercise equipment on the market today.
Note: Safety of the equipment can be maintained only if the equipment is examined regularly for damage or wear. Keep
the equipment out of use until the defective parts are required or replaced. Pay special attention to parts that are subject
to wear, as outlined below.
The following preventive maintenance tips will keep the Life Fitness treadmill operating at peak performance:
IMPORTANT: Turn the treadmill off and unplug prior to performing any maintenance.
Inspect the power cord. If the cord is damaged call technical support. Make sure
the cord is positioned in a location where it will not be damaged.
Check the operation of the Emergency Stop System.
Weekly
Check the operation of the Stop Key.
Check the position (centering) of the walking belt.
Vacuum around and under the walking belt. It is normal for there to be some black
dust behind the unit from the walking belt.
Clean the display console and all exterior surfaces with mild soap, water and a soft
cotton cloth or use a Life Fitness approved cleaner.
Monthly
Note: Do not use paper towels, ammonia or acid based cleaners on the product.
At no time should cleaner be applied directly to any part of the equipment; spray
the cleaner on a soft cloth and then wipe the unit.
Inspect the exterior parts for wear and check that user assembly bolts are still tight.
You will receive a message ‘LUBRICATE WALKING BELT’ on the console that
reminds you to re-lubricate the belt at fixed intervals. The procedure to lubricate
the walking belt is listed below.
Yearly
Lubricating the Walking Belt
1. Turn the treadmill off with the ON / OFF switch and then unplug the power cord from the outlet.
2. Loosen the rear roller adjustment bolts approximately 10 full turns. Be sure to note how many turns you have
rotated the screws since this is how many turns you will tighten them at the end of this procedure.
3. Using the Silicon lubricant approved by Life Fitness, apply one half of the bottle to the surface of the deck between
the belt and the deck. Try to apply the majority of the lubricant to the center of the deck.
4. Visually make sure the walking belt is centered on the deck and then tighten the rear roller adjustment bolts the
same number of turns as when you loosened them.
5. Plug the treadmill in and turn on the ON / OFF switch.
6. Run the treadmill at 3 mph / 5 kph and check that the belt runs centered. If not, follow the instructions in How to
Adjust and Tension the Striding Belt.
7. Reset the LUBRICATE WALKING BELT message on the console. To reset the message enter the Settings Menu.
Scroll to the Message: HOURS SINCE BELT LUBRICATION = XXXX. Press and hold the DOWN arrow key for 10
seconds to reset the lubrication timer.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
LIFE FITNESS APPROVED CLEANERS
Two preferred cleaners have been approved by Life Fitness reliability experts: PureGreen 24 and Gym Wipes. Both
cleaners will safely and effectively remove dirt, grime and sweat from equipment. PureGreen 24 and the Antibacterial
Force formula of Gym Wipes are both disinfectants that are effective against MRSA and H1N1.
PureGreen 24 is available in a spray which is convenient for gym staff to use. Apply the spray to a microfiber cloth and
wipe down the equipment. Use PureGreen 24 on the equipment for at least 2 minutes for general disinfection purposes
and at least 10 minutes for fungus and viral control.
Gym Wipes are large, durable pre-moistened wipes to use on the equipment before and after workouts. Use Gym Wipes
on the equipment for at least 2 minutes for general disinfection purposes.
Contact Life Fitness Customer Support Services to order these cleaners.
Call 1-800-351-3737 or email: [email protected].
LIFE FITNESS COMPATIBLE CLEANERS
Mild soap and water or a mild non-abrasive household cleaner can also be used to clean the display and all exterior sur-
faces. Use a soft cotton cloth only. Apply the cleaner to the cotton cloth before cleaning. DO NOT use ammonia or acid
based cleaners. DO NOT use abrasive cleaners. DO NOT use paper towels. DO NOT apply cleaners directly to the
equipment surfaces.
11.4 USING AND TESTING THE SAFETY STOP PULL CORD
During operation of the treadmill, the lanyard on the Safety Stop Pull Cord should be attached to an item of the user’s
clothing.
While the treadmill is on and the console display is active, remove the Safety Stop Pull Cord from the treadmill. A mes-
sage shall be displayed on the console similar to “EMERGENCY STOP - REPLACE KEY”. With the Safety Stop Pull
Cord removed no keys shall function on the treadmill.
Place the Safety Stop Pull Cord back in place. The treadmill will reset and will be ready for operation.
11.5 HOW TO OBTAIN PRODUCT SERVICE
1. Please contact your dealer or Life Fitness Customer Service at 1-800-351-3737.
2. Verify the symptom and review the operating instructions and troubleshooting matrix.
3. Locate and document the serial number of the treadmill. The treadmill’s serial number is located on the front
of the treadmill near the power switch. Please also have proof of purchase information available.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
12
SPECIFICATIONS
LIFE FITNESS TREADMILL SPECIFICATIONS
Designed use:
Maximum user weight:
Speed range:
Elevation range:
Motor:
Home
300 pounds / 136 kilograms
0.5 - 10.0 mph in 0.1 increments
0%-12% (in 0.5% increments)
2.5 HP continuous duty DC
Front: 2.6" (67mm) precision crowned
Back: 2.0" (50mm) precision crowned
55" Length x 20" Width
Rollers:
Belt:
(147cm Length x 50cm Width), multi-ply
Flex Deck cushioning
Deck:
Handrails:
Accessory tray:
Ergo Crossbar with side handrails.
Standard, designed into system
Physical Dimensions:
Length:
Unfolded
Folded
77 inches / 196 centimeters
34 inches / 86 centimeters
59 inches / 150 centimeters
259 pounds / 117 kilograms
35 inches / 89 centimeters
34 inches / 86 centimeters
75 inches / 190.5 centimeters
Width:
Height:
Weight:
Shipping Dimensions:
Carton Length:
86.25 inches / 219 centimeters
33 inches / 84 centimeters
14 inches / 35.5 centimeters
284 pounds / 129 kilograms
Carton Width:
Carton Height:
Total Weight:
32
Download from Www.Somanuals.com. All Manuals Search And Download.
13
WARRANTY INFORMATION
Model
Lifetime
10 Years
5 Years
1 Year
Labor, Console
Battery and Heart
Rate Chest Strap
Battery
Electrical Parts,
Mechanical Parts, &
Console Parts*
Life Fitness
Treadmill
Frame & Lifesprings
Motor
*Console and Heart Rate Chest Strap Battery 1 year warranty
WHAT IS COVERED:
This Life Fitness consumer product ("Product") is warranted to be free of all defects in material and workmanship.
WHO IS COVERED:
The original purchaser or any person receiving a newly purchased Product as a gift from the original purchaser.
HOW LONG IS IT COVERED:
Residential: All electrical and mechanical components and labor are covered, after the date of purchase, as listed on the
chart on the following page.
Non-Residential: Warranty void (this Product is intended for residential use only).
WHO PAYS SHIPPING & INSURANCE FOR SERVICE:
If the Product or any warranted part must be returned to a service facility for repairs, Life Fitness will pay all shipping
and insurance charges during the warranty period (within the United States only). The purchaser is responsible for ship-
ping and insurance charges after the warranty has expired.
WHAT WE WILL DO TO CORRECT COVERED DEFECTS:
We will ship to you any new or rebuilt replacement part or component, or, at our option, replace the Product. Such
replacement parts are warranted for the remaining portion of the original warranty period.
WHAT IS NOT COVERED:
Any failures or damage caused by unauthorized service, misuse, accident, negligence, improper assembly or installation,
debris resulting from any construction activities in the Product's environment, rust or corrosion as a result of the Product's
location, alterations or modifications without our written authorization or by failure on your part to use, operate and main-
tain the Product as set out in your User Manual ("Manual"). All terms of this warranty are void if this Product is moved
beyond the continental borders of the United States of America (excluding Alaska, Hawaii and Canada) and are then
subject to the terms provided by that country's local authorized Life Fitness Representative.
WHAT YOU MUST DO:
Retain proof of purchase (our receipt of the attached registration card assures registration of purchase information but is
not required); use, operate and maintain the Product as specified in the Manual; notify the place of purchase of any
defect within 10 days after discovery of the defect; if instructed, return any defective part for replacement or, if neces-
sary, the entire Product for repair. Life Fitness reserves the right to decide whether or not a product is to be returned
for repair.
USER MANUAL:
It is VERY IMPORTANT THAT YOU READ THE MANUAL before operating the Product. Remember to perform the peri-
odic maintenance requirements specified in the Manual to assure proper operation and your continued satisfaction.
PRODUCT REGISTRATION:
Register online at www.lifefitness.com/home/product-registration.html. Our receipt assures that your name, address
and date of purchase are on file as a registered owner of the Product. Failure to return the card will not affect your rights
under this warranty. Being a registered owner assures coverage in the event you lose your proof of purchase. Please
retain your proof of purchase, such as your bill of sale or receipt.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO GET PARTS & SERVICE:
Simply call Customer Service at 1-800-351-3737 or (+1) 847-288-3300, Monday through Friday from 8:00 a.m. to 5:00
p.m. Central Standard Time, and tell them your name, address and the serial number of your Product (consoles and
frames may have separate serial numbers). They will tell you how to get a replacement part, or, if necessary, arrange for
service where your Product is located.
EXCLUSIVE WARRANTY:
THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND EITHER EXPRESSED OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, AND ALL OTHER OBLIGATIONS OR LIABILITIES ON OUR PART. We neither
assume nor authorize any person to assure for us any other obligation or liability concerning the sale of this Product.
Under no circumstances shall we be liable under this warranty, or otherwise, of any damage to any person or property,
including any lost profits or lost savings, for any special, indirect, secondary, incidental or consequential damages of any
nature arising out of the use of or inability to use this Product. Some states do not allow the exclusion or limitation of
implied warranties or of liability for incidental or consequential damages, so the above limitations or exclusions may not
apply to you. Warranties may vary outside the U.S. Contact Life Fitness for details.
CHANGES IN WARRANTY NOT AUTHORIZED:
No one is authorized to change, modify or extend the terms of this limited warranty.
EFFECT OF U.S. STATE LAWS:
This warranty gives you specific legal rights and you may have other rights which vary from state to state.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
|