Liebherr Freezer 7082 300 03 User Manual

GB  
Operating instructions  
for NoFrost freezer  
2
4
6
-
-
6
8
-12  
7
2
4
6
-
-
6
8
-12  
6
2
-
6
6
2
4
6
-
-
6
8
-12  
2
6
-
6
5
-12  
4
2
4
6
-
-
6
8
-12  
2
4
6
-
-
6
8
4
-12  
3
2
4
6
-
-
6
8
7082 300-03  
-12  
2
4
6
-
-
6
8
3
-12  
2
GN/SGN/es..6 4905  
2
4
6
-
-
6
8
-12  
2
4
6
-
-
6
8
2
-12  
1
2
4
6
-
-
6
8
-12  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Congratulations on your purchase. In choosing  
this appliance you have opted for all the benefits of  
state-of-the-art refrigeration technology, guarantee-  
ing you top quality, a long life span and excellent  
reliability.  
The features on your appliance have been designed  
to ensure maximum convenience - day in, day out.  
This appliance has been manufactured with recy-  
clable materials using an environmentally friendly  
process, so together you and we are making  
an active contribution to the preservation of our  
environment.  
To get to know all the benefits of your new ap-  
pliance, please read the information contained in  
these operating instructions carefully.  
We wish you much pleasure with your new ap-  
pliance.  
Safety regulations  
§
W The appliance is designed to freeze and store food and  
to make ice. It is designed as a household appliance. We  
cannot guarantee that the appliance will work properly if  
it is used for another purpose.  
W The appliance is set to operate within specific ambient  
temperature limits according to its climate rating. These  
temperature limits should not be exceeded. The correct  
climate rating for your appliance is indicated on the type  
plate. This is explained as follows:  
GB  
Climate rating  
Set for ambient temperatures  
SN, N  
ST  
T
up to +32°C  
up to +38°C  
up to +43°C  
- The appliance will function properly in ambient tempera-  
tures of down to +5°C.  
- The refrigerant circuit has been tested for leaks.  
- The appliance complies with current safety regulations  
and EC directives 73/23/EEC and 89/336/EEC.  
Keep these operating instructions in a safe place and  
pass them on to the next owner, where applicable.  
The operating instructions apply to several models.  
Differences may therefore occur.  
Notes on energy saving  
W Ensure that there is adequate space around the appliance  
for ventilation and air extraction.  
W Avoid keeping the door open for too long.  
W Store food logically. Do not exceed the storage period  
specified.  
W Keep all food properly packed and covered so as to  
avoid its frosting up on the outside.  
W Always allow hot food to cool to room temperature before  
placing in the appliance.  
Contents  
Page  
Operating instructions  
The appliance at a glance.................................. 12  
Contents ............................................................ 13  
Safety regulations .............................................. 13  
Notes on energy saving ..................................... 13  
Safety instructions and warnings............................ 14  
Disposal notes ................................................... 14  
Setting up........................................................... 14  
Connecting to the mains......................................... 14  
Operation and control elements.............................. 15  
Switching the appliance on and off ................... 15  
Setting the temperature ..................................... 15  
Temperature display........................................... 15  
Audible warning signal....................................... 15  
Power failure/FrostControl display..................... 15  
Additional functions - child-proof lock............... 15  
Display brightness* ............................................ 15  
SuperFrost............................................................... 16  
Notes on freezing and storage .......................... 16  
Equipment............................................................... 17  
Information system ............................................ 17  
Freezer tray ........................................................ 17  
Cold-storage accumulators ............................... 17  
Making ice-cubes .............................................. 17  
VarioSpace*........................................................ 17  
Lighting*............................................................. 17  
Cleaning .................................................................. 18  
Troubleshooting....................................................... 18  
Customer service and type plate....................... 19  
Instructions for installation and modification  
Dimensions ........................................................ 20  
Changing over door hinges...........................20-21  
W Defrost frozen food in the refrigerator.  
W Keep the appliance door shut in the event of a break-  
down. This will delay the cold loss and will help to main-  
tain the quality of the frozen food for longer.  
The insulation plate for running freezer at part  
capacity  
is available as an accessory from your  
dealer.  
2
4
6
-
6
-
8
-12  
7
If you do not store much frozen food  
in your freezer you can use the insula-  
tion plate to cut your freezer's energy  
consumption by up to half.  
2
4
6
-
-
6
8
-12  
6
2
4
6
-
-
6
8
-12  
4
2
-
-
6
8
4
- You can "switch off" any number of  
drawers up to 5 (depending on mod-  
el). At least 2 drawers are required  
for the refrigeration unit to work.  
For more information see the  
instruction manual of the insulation  
plate.  
6
-12  
3
2
4
6
-
-
6
8
-12  
2
2
4
6
-
-
6
8
-12  
1
*
GN/SGN/es..6  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety instructions and warnings  
W Avoid prolonged skin contact with cold surfaces or  
Disposal notes  
chilled/frozen food. This could cause pain, numbness and  
frostbite. In the case of prolonged skin contact, protective  
measures should be taken, e.g. gloves should be worn.  
W Do not eat ice-cream, particularly ice lollies or ice-cubes,  
immediately after taking them from the freezer compart-  
ment as there is a risk of "burning" because of the very  
cold temperatures.  
The packaging is designed to protect the appliance  
and individual components during transport and is  
made of recyclable materials.  
- Corrugated board/board  
- Moulded polystyrene (foamed, CFC-free polystyrene)  
- Polythene bags and sheets  
- Polypropylene straps  
W Do not consume food which has been stored for too long,  
as it could cause food poisoning.  
W Keep packaging materials away from children - poly-  
thene sheets and bags can suffocate!  
W Please return the packaging material to your nearest of-  
ficial collection point so that the various materials can be  
reused or recycled as far as possible.  
Setting up  
W When setting up/fitting ensure that the refrigerant circuit  
pipes are not damaged.  
W Once in position, use the 10 spanner provided to adjust  
the feet so that the appliance is level and does not  
wobble.  
Your old appliance:  
This contains some reusable materials and should be  
disposed of properly - not simply with unsorted house-  
hold refuse.  
W Avoid positioning in direct sunlight or next to an oven, ra-  
diator or similar, in damp locations or near spraying water.  
The basement is an ideal site for installation.  
W Standard EN 378 specifies that the room in which you  
install your appliance must have a volume of 1 m3 per 8 g  
of R 600a refrigerant used in the appliance, so as to avoid  
the formation of inflammable gas/air mixtures in the room  
where the appliance is located in the event of a leak in  
the refrigerant circuit. The quantity of refrigerant used in  
your appliance is indicated on the type plate on the  
inside of the appliance.  
W Disable discarded appliances immediately by removing  
the plug and cutting through the connection cable.  
W Remove the spring-action or bolt catch from the appli-  
ance so that playing children cannot become trapped  
inside and suffocate.  
W Make sure that the refrigerant circuit of an appliance that  
is no longer needed is not damaged before it is collected  
or handed in at a municipal collection point so as to  
ensure that the refrigerant or oil does not escape into the  
environment.  
- Exact details of the refrigerant used can be found on the  
type plate. The heat insulator is PU with Pentane.  
- Information on collection dates or collection points can  
be obtained from the waste disposal authorities or your  
local council.  
W The ventilation grilles should not be obstructed.  
Always ensure that there is good ventilation and  
that the outward flowing air is able to escape.  
Please note the appendix concerning installation  
instructions.  
W Do not place heat-emitting appliances, e.g. microwave  
oven, toaster, etc., on top of the refrigerator or freezer.  
Technical safety  
W Remove all transportation safety components.  
W To prevent injury or damage to the unit, the ap-  
pliance should only be transported wrapped and  
set up by two people.  
Connecting to the mains  
Power supply (AC) and voltage  
W The refrigerant R 600a is environmentally friendly but  
flammable.  
at the operating point must comply with the details on the  
type plate, which is located inside the appliance on the  
left, fig. A.  
W Do not damage the refrigerant circuit pipes. Splashes of  
refrigerant can harm your eyes or ignite.  
W Connect the appliance with a properly earthed  
fused plug and socket only.  
W If refrigerant escapes, remove all naked flames or sources  
of ignition in the vicinity of the leak, disconnect the appli-  
ance from the mains and ventilate the area well.  
W In the event that the appliance is damaged, contact the  
supplier immediately before connecting to the mains.  
W To guarantee safe operation, ensure that the appliance is set  
up and connected as described in these operating instructions.  
W Disconnect the appliance from the mains if any fault oc-  
curs. Pull out the plug (not by pulling on the mains cable)  
or switch off or remove the fuse.  
W The socket must be fused with a 10 A fuse or higher, it  
must be away from the rear of the appliance and must be  
easily accessible.  
W Do not  
- connect to stand-alone inverters*,  
- operate with so-called energy-saving plugs - this can  
damage the electronic system,  
- connect to the supply with other equipment using an  
extension cable - risk of overheating.  
W
Any repairs and work on the appliance should only be car-  
ried out by the customer service department, as unauthor-  
ised work could prove highly dangerous for the user. The  
same applies to changing the mains power cable.  
W When removing the mains cable from the back of the appli-  
ance, remove the cable holder so as to avoid vibration noise.  
The wires in the mains lead are coloured in accordance with  
the following code: green/yellow = earth, blue = neutral,  
brown = live.  
Safety during use  
Warning! This appliance must be earthed.  
Non-rewireable plugs BS 1363  
W Do not store explosives or sprays using combus-  
tible propellants such as butane, propane, pentane,  
etc. in the appliance. Electrical components might  
cause leaking gas to ignite. You can identify such  
sprays by the printed contents or a flame symbol.  
W Only store high-percentage alcohol in tightly sealed, up-  
right containers.  
If this machine or appliance is fitted with a non-rewireable  
plug, the following information applies: If the socket outlets  
are not suitable for the plug supplied with this product, it  
must be cut off and an appropriate plug fitted. The plug cut  
from the flexible cord should be disposed of and on no ac-  
count be inserted into a 13 A socket elsewhere in the house  
(electric shock hazard).  
W Do not allow naked flames or ignition sources to enter the  
appliance.  
W Do not use electrical appliances inside the appliance (e.g.  
steam cleaners, heaters, ice makers, etc.).  
The fuse cover must be re-fitted when changing the fuse, and if  
the fuse cover is lost the plug must not be used until a suitable re-  
placement is obtained. The colour of the correct replacement cover  
is that of the coloured insert in the base of the plug, or the colour  
that is embossed in words on the base of the plug (as applicable to  
the design of the plug fitted). The correct rating of the replacement  
fuses that are ASTA approved to BS 1362 should be fitted. Re-  
placement fuse covers may be purchased from your local electrical  
suppliers, electricity showroom or approved service agent.  
W Do not stand on the plinth, drawers or doors or use them  
to support anything else.  
W This appliance is not intended for use by persons (includ-  
ing children) with reduced physical, sensory or mental  
capabilities or lack of experience and knowledge unless  
they have been given initial supervision or instruction  
concerning use of the appliance by a person responsible  
for their safety. Children should be supervised to ensure  
that they do not play with the appliance.  
GN/SGN/es..6  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation and control elements  
Audible warning signal  
The audible warning signal helps to protect frozen food  
and to save energy.  
W The audible warning device is switched off by pressing  
GB  
the audible warning button 5.  
- It switches off automatically as soon as the temperature  
is low enough or the door is closed.  
Audible door alarm  
- This sounds when the door has been left open for longer  
than about 60 seconds. The sound switch-off function is  
active as long as the door is left open. The alarm auto-  
matically switches back to standby when the door is  
shut.  
Switching the appliance on and off  
W Switching on: Press the on/off button 3 so that the  
temperature display lights up/flashes.  
- When the appliance is switched on for the first time and  
while it is still warm, the display will contain dashes until  
the temperature falls below 0°C.  
Audible/visual temperature alarm  
- It always sounds if the freezer temperature is not low  
enough (dependent on the temperature setting).  
- The temperature display flashes at the same time.  
This can be caused by:  
- The Lighting* will light up when the door is open.  
W Switching off: Press the on/off button for approx. two  
seconds so that the temperature display goes out.  
- warm, fresh food being placed in the freezer,  
- too much warm air from the outside entering when re-ar-  
ranging or removing frozen food.  
The temperature display will continue to flash until the cause  
of the alarm has been rectified. It will then stop flashing  
and light up continually. The audible warning signal is now  
automatically reset.  
Setting the temperature  
The appliance is pre-set for normal operation. We recom-  
mend a temperature of -18°C.  
W To reduce the temperature:  
Press the DOWN button 2.  
W To increase the temperature:  
Press the UP button 2.  
Power failure/FrostControl display  
- While you are entering the temperature, the set tempera-  
ture will flash on the display.  
If  
appears in the display, this means that the  
freezer temperature has risen too high during the  
last few hours or days due to a power failure.  
W If you press the audible warning on/off button 5  
whilst the display is reading , the highest temperature  
regis-tered during the power failure will be displayed.  
- Check the quality of the food and its suitability for con-  
sumption in case it has become too warm or even de-  
frosted.  
- The highest temperature will appear for approx.  
1 minute. After that, the actual temperature in the freezer  
will re-appear. The display can be switched off by press-  
ing the audible warning on/off button.  
- When you press the temperature setting buttons for the  
first time, the most recent setting (known as the "refer-  
ence setting") is displayed.  
- You can change the settings in increments of 1°C by  
briefly pressing the buttons again. If the buttons are held  
down the temperature setting will change faster.  
- The electronic controls will switch over automatically  
about 5 seconds after the last time you pressed the but-  
ton, and the actual temperature in the freezer (known as  
the "actual setting") will be displayed.  
- The temperature can be set at between -14°C and -28°C.  
Whether you can obtain the lowest temperature depends  
on where the appliance is positioned (if it is located in an  
area with a high ambient temperature it will not reach the  
lowest temperature).  
Once the power is re-instated, the appliance will continue to  
operate at the most recent temperature setting.  
Additional functions  
Temperature display  
In set-up mode you can set the child-proof lock and adjust  
the brightness of the display*:  
The highest temperature of the frozen food 1is displayed  
in normal operating mode.  
Activating set-up mode:  
W Press SuperFrost button for approx. 5 secs - the Super-  
Frost button flashes - the display shows c for child-proof  
lock.  
The display will flash:  
- if you change the temperature or  
- if the temperature rises by several degrees, indicating  
cold loss, e.g. if you place fresh, "warm" food in the  
freezer or if you remove or re-pack frozen food the tem-  
perature may rise for a short time due to warm air flow-  
ing into the freezer. Once you have finished loading or  
re-packing, the electronics will automatically re-set the  
temperature to the most recent setting. Short-term rises  
in temperature will not affect the frozen food.  
W If "F 1" to "F 5" appears in the display, the appliance  
has a fault. Consult the customer service department  
indicat-ing the fault number displayed as this will tell the  
techni-cian what kind of irregularity has occurred.  
Note: the value to be altered flashes.  
W Select the required function by pressing the Up/Down  
button:  
c = child-proof lock or h = brightness.  
W Now select/acknowledge function by pressing SuperFrost  
button briefly:  
• For c = child-proof lock, press the Up/Down button to  
select c1 = child-proof lock on or  
c0 = child-proof lock off and acknowledge with  
the SuperFrost button. When the symbol 6is  
lit, the child-proof lock is activated.  
• For h = brightness, press Up/Down button to  
select h1= minimum to h5 = maximum bright-  
ness and acknowledge with the SuperFrost  
button.  
Exit set-up mode:  
W To exit the set-up mode, press the On/Off button;  
after 2 mins. the electronic system switches over auto-  
matically.  
- The normal operating mode is activated again.  
GN/SGN/es..6  
* Depending on model and options  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SuperFrost, notes on freezing and storage  
W Blanch vegetables after washing and cutting them.  
SuperFrost  
(Add to boiling water for 2-3 minutes, remove and  
quickly cool down in cold water. If you blanch with a  
steamer or microwave oven, please observe the rel-  
evant operating instructions.)  
fig. A1  
Fresh food should be frozen to the core as rapidly as pos-  
sible. Frozen food can also be given a cold boost. This  
is provided by the SuperFrost facility and ensures that the  
nutritional value, appearance and flavour of the food remain  
intact.  
W The maximum amount of food which can be frozen in  
24 hours is shown on the type plate ("Freezing capacity  
... kg/24h"), fig. A2, pos. 4. This amount varies accord-  
ing to the model and climate rating.  
W Do not salt or season fresh food or blanched vegeta-  
bles before freezing. Only lightly salt and season other  
food. Some spices can alter their flavour intensity.  
W Do not freeze bottles and cans which contain carbon-  
ated drinks as they might burst. Drinks can be cooled  
down quickly, but take the bottles out of the freezer  
compartment after an hour at the most.  
Freezing with SuperFrost  
W Storage: Each drawer and shelf can take up to 25 kg  
frozen food.  
W If you want to use the maximum net capacity, you can  
remove the drawers and store items directly on the  
shelves.  
- Always leave the bottom drawer in the appliance.  
W Removing drawers: Pull forward  
until the drawer stops and lift out.  
- If you have removed the drawers, do  
not cover the fan slits at the back,  
otherwise the freezer will not work  
properly.  
W Always store identical food items to-  
gether to avoid the door being open  
for unnecessarily long periods and to  
save energy.  
W Press the SuperFrost button 4briefly so that it  
lights up.  
The freezer temperature will decrease and the ap-  
pliance will switch to the lowest temperature.  
W For small amounts of frozen food, it is normally suffi-  
cient to switch on SuperFrost 6 hours beforehand. For  
the maximum amount (see freezing capacity on the type  
plate) you will need to switch it on 24 hours beforehand.  
W Then place the fresh food inside the freezer, preferably in  
the top drawers.  
If freezing the maximum quantity of food, do not use the  
drawers; instead, place the wrapped food directly on the  
shelves. Once the food is frozen you can load it into the  
drawers.  
- The SuperFrost function switches off automatically.  
Depending on the quantity of food placed in the freezer,  
this will normally be between 30 and max. 65 hours. The  
freezing process is now complete, the SuperFrost button  
will go dark, and the freezer will switch back to normal  
energy-saving operation.  
W Do not exceed storage times given.  
W Thawing: Only take out as much food as is immediate-  
ly required for thawing. Cook food which has been  
thawed as quickly as possible.  
Frozen food can be thawed in the following ways:  
- in a conventional or fan oven  
- in a microwave oven  
- at room temperature  
- in the refrigerator: the cold given off by the frozen food  
is used for cooling the other food.  
- Flat portions of meat or fish can be cooked when par-  
tially thawed.  
Note: When the SuperFrost function is activated the appli-  
ance will be running at full capacity, so the refrigera-  
tion unit will sound slightly louder for a while.  
You should not switch on the SuperFrost function:  
- when placing frozen food in the freezer;  
- when freezing up to approx. 2 kg fresh food daily.  
- Vegetables can be cooked from frozen (in half the nor-  
mal time).  
Notes on freezing and storage  
W Items suitable for freezing: meat, game, poultry, fresh  
fish, vegetables, fruit, dairy products, bread, baked  
goods, pre-cooked meals.  
Not suitable: lettuce, radishes, grapes, whole apples and  
pears, fatty meat.  
W Pack frozen food in standard freezer bags or reusable  
plastic, metal or aluminium containers.  
W Do not allow fresh food which is to be frozen to come into  
contact with food already frozen. Always keep packs dry  
in order to avoid them sticking together.  
W Always write the date and contents on the pack and do  
not exceed the stated storage time for the food. This  
prevents any risk of quality impairment.  
W Pack food which you are freezing yourself in quantities  
appropriate to your household. To ensure that the food  
freezes right through quickly, the following quantities  
should not be exceeded per package:  
- fruit, vegetables: up to 1 kg;  
- meat: up to 2.5 kg.  
GN/SGN/es..6  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Equipment  
pre-cooked  
meals  
sausages  
bread  
2 - 6  
4 - 8  
6 -12  
2
Information system*  
Use frozen food within the recommended period.  
The numbers between the symbols indicate the storage  
period in months for different kinds of frozen foods.  
Storage times given are guide times for food frozen at  
home. Whether or not the lower or upper value is applicable  
depends on the food quality and how it was processed prior  
to freezing. The lower values always apply to food with a  
high fat content.  
ice-cream  
GB  
fish  
mushrooms  
game  
pork  
vegetables  
fruit  
poultry  
beef/veal  
G
Freezer tray*  
This is used for gently freezing berries, herbs, vegetables  
and other small items and prevents them from sticking to-  
gether. Items being frozen will largely retain their shape, and  
it will be easier to remove exactly the right quantity later on.  
W Spread the items out loosely on the tray, fig. H.  
W Freeze for 10 to 12 hours, then transfer to a freezer bag  
or container and put in a drawer.  
W To defrost, spread the frozen items out loosely.  
6
8
-
-
2
4
H
Cold-storage accumulators*  
These prevent the temperature in the freezer from rising too  
quickly in the event of a power failure, thus preserving the  
quality of the food.  
W To save space, you can freeze and store the cold-storage  
accumulators in the freezer tray, fig. I.  
- To ensure maximum storage time in the event of a power  
failure, place the frozen cold-storage accumulators in the  
top freezer drawer on top of the food.  
6
8
-
-
2
4
I
Making ice-cubes  
W Fill the ice-cube tray with water.  
W Place the ice-cube tray in the appliance and leave it to  
freeze.  
W The ice-cubes can be removed from the tray by twisting  
or by holding upside down for a short time under running  
water.  
J
2
-1  
12  
VarioSpace*  
-
6
6
5
5
- You can create a double-height space for big items of  
frozen food by removing a drawer and a shelf. This ena-  
bles you to freeze such things as poultry or big pieces of  
meat without having to cut them up first, so they can be  
served "whole" afterwards, and to store other large items  
such as big gateaux or packs of ice.  
6
8
-
-
2
4
6
2
-1  
4
-
-
6
2
4
6
8
2
-1  
K1  
K2  
3
- Removing the drawer, fig. K1: Pull forward until the  
drawer stops and lift out.  
- Removing the shelf, fig. K2: Lift up at the front and pull  
out.  
- To insert: proceed in reverse order; simply push shelf in  
as far as it will go.  
-
-
6
8
2
4
6
2
-1  
2
2
1
6
8
2
4
6
-
-
-
12  
1
K3  
Lighting*  
This switches off automatically after the door has been  
opened for approx. 15 minutes. If it does not switch on  
when the door is opened briefly, but the temperature display  
is working, the bulb may be defective.  
Replacing the bulb:  
W Bulb data: max. 15 W; current and voltage must agree  
with the details on the type plate. Only use bulbs of the  
same size. Bulb fitting: E14.  
W Switch off the appliance. Disconnect from the mains or  
remove or unscrew the fuse.  
W Change the bulb behind the operating panel as illus-  
trated.  
6
8
-
-
2
4
6
L
2
-1  
* Depending on model and options  
GN/SGN/es..6  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning  
Troubleshooting  
Your appliance is designed and manufactured for a long life  
span and reliable operation.  
Notes on defrosting  
The NoFrost system automatically defrosts the appliance.  
Any moisture arising collects on the evaporator and freezes,  
and is periodically defrosted and evaporated.  
The automatic defrosting system keeps the freezer frost-  
free and eliminates the time and effort spent on defrosting  
manually.  
If a malfunction nonetheless occurs during operation, check  
whether it is due to an operating error. Please note that  
even during the warranty period the resultant servicing costs  
in this case will have to be borne by the owner.  
You may be able to rectify the following faults by checking  
the possible causes yourself:  
Malfunction  
- Possible cause and remedy  
Cleaning  
Appliance does not work, the display is off  
- Is the appliance switched on properly?  
- Is the mains plug properly inserted in the socket?  
- Is the socket fuse intact?  
The Lighting* does not come on  
- Is the appliance switched on?  
- Has the door been open for more than 15 minutes?  
- The bulb is defective. Check the bulb as described in  
"Lighting*" and change if necessary.  
W Always disable the appliance for cleaning.  
Disconnect from the mains or unscrew or  
switch off the fuse.  
W Clean the outer walls, inside and equipment by hand with  
lukewarm water and a little detergent. Because of the  
risk of injury and damage to the appliance, steam clean-  
ing equipment should not be used.  
W We recommend using a soft cloth and an all-purpose  
cleaner with a neutral pH value. Only use food compati-  
ble cleaning and care agents on the inside of the appli-  
ance.  
W Use a commercially available stainless-steel cleaning  
agent for stainless-steel appliances*.  
- In order to achieve best possible protection, apply a  
stainless-steel care agent uniformly in grinding direction  
after cleaning. Points which are darker at the start and  
a more intensive coloration of the stainless-steel surface  
are normal.  
- Do not use abrasive sponges or scourers, do not use  
concentrated cleaning agents and never use cleaning  
agents containing sand, chloride or acid or chemical  
solvents, as these would damage the surfaces and could  
cause corrosion.  
W Ensure that no cleaning water is allowed to penetrate into  
the electrical components or ventilation grilles.  
Dry the appliance.  
- Do not damage or remove the type plate on the inside of  
the appliance as this is important for customer service.  
W The dust should be removed from the  
refrigeration unit and heat exchang-  
Loud running noise  
- Is the appliance standing firmly on the floor, or does the  
compressor cause nearby items of furniture or objects to  
vibrate?  
If necessary, move the appliance slightly, align by adjust-  
ing the adjustable feet, or move bottles and containers  
apart.  
- Burbling noises are normal. These are caused by the  
refrigerant flowing round the refrigerant circuit.  
A short clicking sound: This will be heard whenever the  
refrigeration unit (the motor) switches on or off automati-  
cally.  
Motor noise: This will be slightly louder for a brief period  
when the refrigeration unit switches on. The refrigerating  
capacity will increase when the SuperFrost function is ac-  
tivated, fresh food has just been placed in the appliance  
or the door has been left open for a while.  
The compressor will continue to run for a while  
- On energy saving models, this is caused by the func-  
tions and is perfectly normal. When less refrigeration is  
required, the VCC compressor switches to a low speed.  
It will then be running almost constantly, but it does save  
energy  
er - metal grid at the back of the ap-  
pliance - once a year. Dust deposits  
increase energy consumption.  
The audible warning signal sounds, the temperature is  
not cold enough  
- Have you put too much fresh food into the freezer without  
activating SuperFrost? (See "SuperFrost")  
- Does the door close properly?  
W Ensure that none of the wires or  
other components are dislodged,  
bent or damaged.  
- Is the appliance sufficiently well ventilated?  
Clear ventilation grilles if necessary.  
W Then connect/switch on the appliance, switch on  
SuperFrost and start to insert the food to be frozen as the  
temperature drops.  
If the appliance is to be left out of operation for any length  
of time, empty it, disconnect from the mains, clean as  
described above and leave the door open in order to avoid  
unpleasant smells.  
- Is the ambient temperature too hot? (See "Safety regula-  
tions")  
- Has the appliance been opened too often or left open too  
long?  
- If applicable, wait until the appliance reaches the required  
temperature itself.  
appears in the display  
- There has been a power failure; proceed as described in  
"Power failure/FrostControl display".  
The outside of the appliance may feel warm in places  
- That is quite normal. The heat from the cooling circuit is  
used to avoid the formation of condensate.  
GN/SGN/es..6  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Net@Home  
Depending on the model and equipment, your appliance  
may have an additional interface to which you can connect  
an optional Net@Home module.  
You can choose between a TeleSafe module and a home  
bus slave module. The modules are available from your  
dealer.  
Customer service and type  
plate  
GB  
If none of the above causes apply and you cannot  
rectify the fault yourself, or if the temperature display reads  
"F 1 " to " F 5", this means that there is a fault. Please  
contact your nearest customer service department (see  
enclosed list for addresses). Give the fault number dis-  
played, together with the  
If your appliance has this interface 1, it will be located at  
the back of the appliance near the top:  
type designation 1,  
service number 2and  
appliance number 3  
as given on the type plate, fig. A2, so as to ensure rapid, ac-  
curate servicing. The type plate is located inside the freezer  
compartment on the left-hand side.  
Leave the appliance shut until the customer service engi-  
neer arrives so as to prevent any further cold loss.  
1
TeleSafe module  
The TeleSafe module informs you immediately if your appli-  
ance develops a fault.  
In the event of a temperature alarm, mains failure or another  
fault display (F1 to F5), the fault status is immediately for-  
warded to the alarm contact.  
The alarm contact can be connected to any of the following  
processing units:  
- a telephone system with an appropriate signal input,  
- an in-house alarm system or building control system,  
- an automatic telephone dialling and announcement unit.  
In the event of an alarm a programmable number is di-  
alled and a recorded message is played back.  
Home bus module  
The home bus slave module enables you to integrate your  
appliance into a home network (EHS Powerline). You can  
then  
- operate all the functions of the appliance or  
- display the status of the appliance, e.g. door open alarm,  
current refrigerator/freezer temperature, or  
- assemble the Liebherr HomeDialogSystem.  
In this way a freezer installed in the basement can be  
controlled via the display on the combined refrigerator-  
freezer in the kitchen (setting the temperature, switching  
SuperFrost or DuraFrost on and off). All display functions  
(temperature, door alarm, mains failure) can also be called  
up.  
For more information, please visit our website at  
GN/SGN/es..6  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instructions for installation and modification  
hexagon socket on the open-ended spanner provided  
(spanner width 5).  
- Fit covers 8again: insert hinge-side cover by sliding  
outwards and click into position; insert handle-side cover  
by sliding inwards and click into position.  
- Bottom: Using a screwdriver, remove the spacer boand  
replace on the other side.  
Dimensions  
The external dimensions of the appliance can be seen on  
fig. S and in the table below.  
Gross capacity  
of appliance [l]  
(see type plate)  
External dimensions [mm]  
A
B
C
D
E
F
W Re-attach the door:  
- Remove plugs bpfrom the door mounting points and  
replace on the other side.  
162  
200  
238  
276  
(18..)  
1250 600 631 614 644 1179  
1447 600 631 614 644 1179  
1644 600 631 614 644 1179  
1841 600 631 614 644 1179  
(21..)  
(25..)  
(28..)  
- Suspend door with spacer in hinge pin 7, close door.  
- Rotate hinge component 4by 180°, remove hinge pin 5,  
turn by 180° and replace. Mount both parts in the hinge bq:  
slide the pin into the door mounting through the hinge, tilt in  
the hinge component, slide up and attach with screw 3.  
W Align the door flush with the body of the appliance using  
the slot on the hinge bq, then tighten screw 3.  
W Attach the plinth panel 1and click into place by pressing.  
W With the door open, insert the cover 2in the plinth panel  
at the front and click into place at the back.  
W Transfer* door handle brand plugs bt. With the door  
open, carefully lift out the pressure plates* bsat the front  
and slide away; unscrew handle.  
188  
233  
279  
324  
(20..)  
(24..)  
(29..)  
(33..)  
1250 660 683 662 704 1287  
1447 660 683 662 704 1287  
1644 660 683 662 704 1287  
1841 660 683 662 704 1287  
Installation instructions  
- Do not install the appliance directly next to another refrig-  
erator or freezer. This is important to prevent condensa-  
tion and consequential damage resulting from it.  
- This does not apply to Side-by-Side models (SBS). They  
are designed for Side-by-Side installation with another  
refrigerator/freezer.  
The "Installation instructions for Side-by-Side combina-  
tions" are supplied in the accessories bag for the SBS  
freezer or the appliance with a freezer compartment.  
Re-assemble in reverse order: replace the pressure plates  
and click into position.  
Changing over door hinges  
On appliances which are intended for individual installation  
the door hinges can be changed from one side to the other.  
On SBS appliances in stainless steel finish, which are de-  
signed for Side-by-Side installation, the door hinges must  
not be transferred to the other side!  
W Only change over door hinges when mains plug is dis-  
connected!  
W Fig. T. With the door open, lever out plinth panel 1on  
the hinge side with a screwdriver and remove from front.  
- Lever out cover 2with a screwdriver.  
Close door.  
- Unscrew screw M5 3.  
W Pull hinge component 4with hinge pin 5out from un-  
derneath and remove.  
W Open door, lift out at bottom and remove; do not lose the  
spacer bl.  
W Transfer all hinge components onto the other side:  
W Top: depending on version, proceed as follows:  
Version I (visible operating panel): Lever out covers 8  
with a screwdriver at the front and remove at an angle  
from below. Remove hinge pin 7 and insert on the op-  
posite side. Use the hexagon socket on the open-ended  
spanner provided (spanner width 5). Fit covers 8 again:  
insert at rear and click into place at front.  
Insertion into row of kitchen units  
Fig. U. 600 mm appliances can be installed in a row of  
kitchen units. To adapt the height of the appliance to the  
surrounding furniture a top unit 1can be added.  
A gap of at least 50 mm depth must be provided behind and  
along the entire width of this unit so as to ensure sufficient  
ventilation. The area of ventilation underneath the ceiling  
should be at least 300 cm2. The greater the area the more  
economically the appliance will run.  
W When installing with standard kitchen units (max. depth  
580 mm) and decor panels of max. 2 mm thickness, the  
appliance can be set up right next to the kitchen unit.  
The door protrudes 34 mm from the side of the kitchen  
unit and 51 mm at the front. This enables it to be opened  
and closed without difficulty.  
W When setting up the appliance next to a wall 4, a mini-  
mum distance of 36 mm must be provided on the hinge  
side between the appliance and the wall (for the handle  
when the door is open).  
1 top unit  
3 kitchen unit side panel  
2 refrigerator/freezer  
4 wall  
Version II (concealed operating panel): Lift up cover 8  
on handle side, push outwards; lift up cover on hinge side  
and pull off.  
- Unscrew earthing plate cm: first earthing screw cl, then  
inner retaining screw cq.  
- Unscrew hinge 9: first undo earthing screw cl, then re-  
taining screws cq. Fit hinge 9 to opposite side: for easy  
assembly, fit hinge from above and first tighten with the  
upper retaining screw cqM5, then screw cqand finally  
earthing screw cl M4.  
- Turn earthing plate cmthrough 180° and screw tight again  
on the new handle side: first retaining screw cq, then earth-  
ing screw cl.  
- Insert hinge pin 7in the other retaining hole. Use the  
* Depending on model and options  
GN/SGN/es..6  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instructions for installation and modification  
Notes on assembling decor panels  
[mm]  
C
with white appliances of width B = 600 mm and height  
D
B
A = 1841 mm:  
GB  
Decor panel and frames can be attached to the door of your  
appliance to match or contrast it to the existing kitchen  
colour scheme.  
The panels are available from your kitchen furniture supplier.  
The frames can be fitted later and are available from your  
E
F
A
dealer.  
If you wish to fit the decor panels yourself, you will need  
a drill or a rechargeable screwdriver to pre-drill the retain-  
ing holes. The door handles are to be replaced by the rigid  
handles included in the decor frame retrofit kit.  
For further instructions and dimensions see the installation  
instructions included in the retrofit kit.  
S
9
Torx 25  
I
II  
25  
20  
7
SW5  
8
8
7
8
8
SW5  
10  
21  
9
20 25  
25 20  
*
9
21  
13  
2
5
14  
16*  
18 *  
4
3
17*  
15  
Torx 15  
1
13  
15  
T1  
T
min.  
300 cm2  
[mm]  
1
2
_____________________________________________________  
All types and models are subject to continuous improve-  
ment and the manufacturer therefore reserves the right to  
make modifications in the shape, equipment and technol-  
ogy.  
3
4
min. 36  
U
GN/SGN/es..6  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Leica Camera Lens 11648 User Manual
LG Electronics Computer Monitor 29UM65 P User Manual
Life Fitness Treadmill T9 User Manual
Loewe DVD Player Centros 2102 HD User Manual
Makita Drill 6408 User Manual
Manitowoc Ice Ice Maker K00135 User Manual
Maytag Washer MAV5257 User Manual
Memorex Cordless Telephone MPH6935 User Manual
METRObility Optical Systems Switch 3508 11 User Manual
Metrologic Instruments Scanner MS7220 User Manual