LevelOne
FCS-1000
IP Network Camera
WCS-2000
Wireless IP Network Camera
User’s Manual
VERSION 1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
P/N: 9560GF01A0
Copyright 2003. All Rights Reserved.
Document Version: 1.0
All trademarks and trade names are the properties of their respective owners.
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
Introduction
1
This Chapter provides details of the LevelOne IP Network Camera's features,
components and capabilities.
Overview
The LevelOne IP Network Camera has an Integrated Microcomputer and a high quality CMOS
digital-Image-Sensor, enabling it to display high quality live streaming video over your wired
LAN, the Internet, and for the WCS-2000, an 802.11b Wireless LAN.
Using enhanced MPEG-4 technologies, the LevelOne IP Network Camera is able to stream
high quality video directly to your PC. The high compression capabilities of MPEG-4 reduce
network bandwidth requirements to amazingly low levels.
A convenient and user-friendly Windows program is provided for both viewing and recording
video. If necessary, you can even view video using your Web Browser and Microsoft Media
Player, on a variety of software platforms.
Figure 1: LevelOne IP Network Camera
Features
•
Standalone Design. The LevelOne IP Network Camera is a standalone system with
built-in CPU and Video encoder. It requires only a power source and a connection to your
LAN or Wireless LAN.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
Suitable for Home, Business or Public Facilities. Whether for Home, Business or
Public Facility surveillance, or just for entertainment and fun, the LevelOne IP Network
Camera has the features you need.
Multi-Protocol Support. Supporting TCP/IP networking, SMTP (E-mail), HTTP and
other Internet related protocols, the LevelOne IP Network Camera can be easily integrated
into your existing network.
Easy Configuration. A Windows-based Wizard is provided for initial setup.
Subsequent administration and management can be performed using a standard web
browser. The administrator can configure and manage the LevelOne IP Network Camera
via the LAN or Internet.
•
•
Viewing/Recording Utility. A user-friendly Windows utility is provided for viewing
live video. For periods when you are absent, or for scheduled recording, this application
also allows you to record video to an ASF file on your PC. The recorded files are in a
standard Windows Media format, and thus usable by a wide variety of programs if
required.
Motion Detection. This feature will capture a short video and send it to your E-mail
address when motion is detected. The LevelOne IP Network Camera will compare
consecutive frames to detect changes caused by the movement of large objects. This
function only works indoors due to the sensitivity of the CMOS sensor.
Internet Features
•
User-definable HTTP port number. This allows Internet Gateways to use “port
mapping” so the LevelOne IP Network Camera and a Web Server can share the same
Internet IP address.
•
DDNS Support. In order to view video over the Internet, users must know the Internet
IP address of the gateway used by the LevelOne IP Network Camera. But if the Gateway
has a dynamic IP address, DDNS (Dynamic DNS) is required. Since many existing
Gateways do not support DDNS, this function is incorporated into the LevelOne IP
Network Camera.
•
NTP (Network-Time-Protocol) Support. NTP allows the LevelOne IP Network
Camera to calibrate its internal clock from an Internet Time-Server. This ensures that the
time stamp on Video from the LevelOne IP Network Camera will be correct.
Security Features
•
User Authentication. If desired, access to live video can be restricted to known users.
Users will have to enter their username and password before being able to view the video
stream. Up to 20 users can be entered.
•
Password-Protected Configuration. Configuration data can be password protected, so
that it only be changed by the LevelOne IP Network Camera Administrator.
Wireless Features (WCS-2000 only)
•
Standards Compliance. The IEEE 802.11b standard is fully supported. Gain the
advantages of mobility, flexibility and high-speed by using IEEE 802.11b wireless LAN
technology.
•
•
Wired and Wireless Network Support. The WCS-2000 supports both wired and
wireless transmission.
WEP Support. Full WEP support (64/128 Bit) on the Wireless interface is provided.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Physical Details
Figure 2: LevelOne IP Network Camera
Front-mounted LEDs
Ready
On - Power on.
Off - No power.
Blinking - The Ready LED will blink during start up. This will take
15 to 20 seconds.
Active
LAN
Off - Idle.
Blinking - LevelOne IP Network Camera is providing a live video
stream to at least one viewer.
On - LAN port is active.
Off - LAN port is not available.
Blinking - Data is being transmitted or received via the LAN port.
On - Wireless interface is active.
Wireless
(WCS-2000 only)
Off - Wireless interface is not available.
Blinking - Data is being transferred via the Wireless interface.
Rear Panel
Power Input
LAN port
Connect the supplied power adapter here.
Use a standard LAN cable to connect your LevelOne IP Network
Camera to a 10/100BaseT hub or switch.
Reset Button
This button has two (2) functions:
•
•
Restore Default IP Address. When pressed and released, the
LevelOne IP Network Camera will reset its IP address to the
default value
Restore Default IP Address, Administrator ID, and
Administrator password. When pressed and held or 3
seconds, the IP address, Administrator ID, and Administrator
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Password settings will be set to their default values.
•
•
•
IP address: 192.168.0.99
Administrator ID: administrator
Administrator Password: null (no password)
Note: After this procedure is completed, all LEDs will blink three
times to confirm that the reset was completed successfully.
Package Contents
The following items should be included: If any of these items are damaged or missing, please
contact your dealer immediately.
1. The LevelOne IP Network Camera
2. Installation CD-ROM
3. Quick Installation Guide
4. Power adapter
5. Base, Stand and Swivel Connector
6. Extender Unit
7. Mounting Screws
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Basic Setup
2
This Chapter provides details of installing and configuring the LevelOne IP
Network Camera.
System Requirements
•
To use the LAN interface, a standard 10/100BaseT hub or switch and network cable is
required.
•
To use the Wireless interface on the WCS-2000, other Wireless devices must be compliant
with the IEEE802.11b specifications. All Wireless stations must use compatible settings.
Installation
Figure 3: LevelOne IP Network Camera Installation
1. Mount the Camera on the supplied Base and Stand.
Join the Base, stand and swivel connector to the camera, as shown in the diagram above.
2. Connect the LAN Cable
Connect the LevelOne IP Network Camera to a 10/100BaseT hub or switch.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
For the WCS-2000, this disables the Wireless Interface, because
only one interface can be active. The LAN interface is
recommended for initial configuration.
The default Wireless settings for the WCS-2000 are:
Mode: Infrastructure
Channel: 11
ESSID: wireless
WEP: Disabled
3. Adjust the Antenna
On the WCS-2000, flip the top-mounted Antenna to the upright position to improve
wireless reception.
4. Power Up
Connect the supplied power adapter to the LevelOne IP Network Camera and power up.
Use only the power adapter provided. Using a different one may cause hardware damage.
4. Check the LEDs
•
The Ready LED will turn on briefly, then start blinking. It will blink during startup, which
takes 15 to 20 seconds.
After startup is completed, the Ready LED should remain ON.
•
•
The Active LED should be OFF.
It will flash when anyone is viewing live video.
Either the LAN LED OR the Wireless LED should be ON.
For more information, refer to Front-mounted LEDs in Chapter 1.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
Initial setup should be performed using the supplied Windows-based setup Wizard. This
program can locate the LevelOne IP Network Camera even if its IP address is invalid for your
network. You can then configure the LevelOne IP Network Camera with appropriate TCP/IP
settings for your LAN.
Subsequent administration can be performed with your Web browser, as explained in Chapter
3 - Web-based Administration.
Setup Procedure
1. Insert the supplied CD-ROM into your drive. If the setup program does not start
automatically, run Netcam_Setup.exe in the root folder. You will see the Welcome screen
shown below.
Figure 4: Welcome Screen
2. Click the Setup button to start the setup Wizard.
3. The next screen will list all the LevelOne IP Network Cameras on your LAN. An example
screen is shown below.
Figure 5: Camera List Screen
7
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Select the desired Camera from the list on the left. The current settings for the selected
Camera will be displayed in the table on the right.
5. Click Next to continue.
6. If the Administrator ID and Password have been set, you will be prompted to enter them,
as shown below. Enter the Administrator ID and Password set on the User screen.
Figure 6: Password Dialog
By default, the Administrator ID and password are blank.
However, you should assign a name and password, on the
"User" screen of the Web interface. The Web interface can be
accessed via the "Web UI" button on the final screen of the
Wizard.
7. On the following screen, shown below, choose Fixed IP or Dynamic IP.
•
•
Fixed IP is recommended, and can always be used.
Dynamic IP can only be used if your LAN has a DCHP Server.
Figure 7: Fixed or Dynamic IP Selection
8. Click Next to continue.
•
If Dynamic IP Address was selected, you will then see the screen shown in Figure 9:
Camera Settings.
•
If you selected Fixed IP Address, the following screen will be displayed.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 8: TCP/IP Settings
9. Enter the desired IP address values:
•
•
Enter an unused IP Address from within the address range used on your LAN.
The Subnet Mask and Default Gateway fields must match the values used by PCs on
your LAN.
•
Click Next to continue.
Figure 9: Camera Settings
10. This screen allows you to enter a suitable Description, and set the correct Date, Time, and
Time Zone. Make any desired changes, then click Next to continue.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 10: Save Screen
11. This screen displays all details of the LevelOne IP Network Camera.
Click Save if the settings are correct, or click Back to modify any incorrect values.
12. After clicking Save, you will see the screen below.
You can click the Web UI button to connect to the camera using
your Web Browser.
Using the Web UI is required in order the change the Wireless
settings for the WCS-2000, on the Network screen. The default
Wireless settings for the WCS-2000 are:
Mode: Infrastructure
Channel:11
ESSID: wireless
WEP: Disabled
Figure 11: Final Screen
13. Click Exit to end the Wizard.
Setup is now complete.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
Setup for Viewing
3
This Chapter provides information about the optional settings and features for
viewing video via the LevelOne IP Network Camera. This Chapter is for
Administrators only.
Introduction
After finishing setup via the Windows-based Wizard, the LevelOne IP Network Camera can
immediately be used by all users on your LAN.
This chapter describes some additional settings and options for viewing live Video:
•
•
•
•
Adjusting the video image
Controlling user access to the live video stream
Making video available from the Internet
Using the Motion Detection/E-mail feature
Adjusting the Video Image
If necessary, the LevelOne IP Network Camera Administrator can adjust the Video image.
Settings are provided for:
•
•
Image size - Select 320 x 240 or 160 x 120. The larger size requires greater bandwidth.
Image quality - This determines the degree of compression applied to the Video stream.
Higher quality requires greater bandwidth.
•
Exposure - Adjust the brightness of the image, if the Auto-Exposure does not give
satisfactory results.
•
•
•
Color Adjustment - Red, Green, Blue intensity can be adjusted.
Time Stamp - If enabled, the date/time will be displayed on the Video image.
Text Overlay - If enabled, up to 20 characters can be superimposed on the Video image.
This is useful for identifying the camera.
To Adjust the Video Image:
1. Connect to the Web-based interface of the LevelOne IP Network Camera. (See Chapter 4
- Web-based Management for details.)
2. On the Administration menu, select Image. You will see a screen like the example below.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 12: Image Screen
3. Make the required adjustments, and save your changes.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling User Access to the Video Stream
By default, all users can connect to the LevelOne IP Network Camera and view live Video.
If desired, you can limit access to known users, by requiring each user to login to the LevelOne
IP Network Camera with their individual username and password.
To Enable this feature:
1. Connect to the Web-based interface of the LevelOne IP Network Camera. (See Chapter 4
- Web-based Management for details.)
2. On the Administration menu, select User.
3. Select the setting Allow access by Only users in database, as shown below.
Figure 13: User Screen
4. To add users to the database, click the Add button, and enter the name and password for
each user.
Operation
•
When each user connects, they will be prompted for their username and password. They
must enter the name and password defined on the User screen above.
•
If using the Windows Viewing/Recording utility, the username and password can be
entered into the program, so that users do not need to provide the login data each time.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Video available from the Internet
If your LAN is connected to the Internet, typically by a Broadband Gateway/Router and
Broadband modem, you can make the LevelOne IP Network Camera available via the Internet.
LevelOne IP Network Camera Setup
The LevelOne IP Network Camera configuration does NOT have be changed, unless:
•
•
You wish to change the port number from the default value (1024).
You wish to use the DDNS (Dynamic DNS) feature of the LevelOne IP Network Camera.
Second Port Configuration
Normally, HTTP (Web) connections use port 80. Since the LevelOne IP Network Camera uses
HTTP, but port 80 is likely to be used by a Web Server, you can use a different port for the
LevelOne IP Network Camera. This port is called the "Second Port". (The first port is port 80.)
The default "Second Port" number is 1024. If you prefer to use a different port number, you
can specify the port number on the LevelOne IP Network Camera's Network screen, as shown
below.
Figure 14: Network Screen
The Network screen is part of the Web-based Administration interface. See Chapter 4 - Web-
based Management for further details on using this interface.
Viewers need to know this port number in order to connect
and view live Video, so you must inform viewers of the
current port number.
DDNS (Dynamic DNS)
Many internet connections use a "Dynamic IP address", where the Internet IP address is
allocated whenever the Internet connection is established.
This means that other Internet users don't know the IP address, so can't establish a connection.
DDNS is designed to solve this problem, by allowing users to connect to your LAN using a
domain name, rather than an IP address.
To use DDNS:
1. Register for the DDNS service with a supported DDNS service provider. You can then
apply for, and be allocated, a Domain Name.
2. Enter and save the correct DDNS settings on the Network screen of the LevelOne IP
Network Camera.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 15: DDNS Settings - Network Screen
3. Operation is then automatic:
•
The LevelOne IP Network Camera will then automatically contact the DDNS server
whenever it detects that the Internet IP address has changed, and inform the DDNS
server of the new IP address.
•
Internet users can then connect to your LAN using the Domain Name allocated by the
DDNS service provider.
Router/Gateway Setup
Your Router or Gateway must be configured to pass incoming TCP (HTTP) connections (from
Viewers) to the LevelOne IP Network Camera. The Router/Gateway use the Port Number to
determine which incoming connections are intended for the LevelOne IP Network Camera.
This feature is normally called Port Forwarding or Virtual Servers, and is illustrated below.
The Port Forwarding/Virtual Server entry tells the Router/Gateway that incoming TCP
connections on port 1024 should be passed to the LevelOne IP Network Camera. If necessary,
check your Router/Gateway's user manual to check how to perform this configuration.
Figure 16: Connecting via the Internet
The "Port" for the Port Forwarding / Virtual Server entry
above is the port number specified on the Network screen of
the LevelOne IP Network Camera.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing via the Internet
Clients (viewers) will also need a broadband connection; dial-up connections are NOT
recommended.
Using the Windows Viewing/Recording Utility
If using the Windows Viewing/Recording Utility, the details of the LevelOne IP Network
Camera must be entered on the Internet tab of the Add Camera screen.
Figure 17: Add Camera from Internet
You can then select the camera in the Cameras list on the main screen, and click View to
establish a connection and view live video.
See Chapter 5 - Viewing and Recording for full details on using the Windows
Viewing/Recording utility.
Using your Web Browser
If using your Web browser, you need to enter EITHER the Internet IP address OR the Domain
name, AND the correct port number, of the LevelOne IP Network Camera.
Enter the address of the LevelOne IP Network Camera, and its port number, in the Address (or
Location) field of your Browser.
Example - IP address:
HTTP://203.70.212.52:1024
Where the Router/Gateway's Internet IP address is 203.70.212.52and the "Second Port"
number on the LevelOne IP Network Camera is 1024.
Example - Domain Name:
HTTP://mycamera.dyndns.tv:1024
Where the Router/Gateway's Internet Domain name (using DDNS in this example) is
mycamera.dyndns.tvand the "Second Port" number on the LevelOne IP Network
Camera is 1024.
See Chapter 5 -Viewing and Recording for further details of viewing Video using either the
Windows Viewing/Recording utility or your Web Browser.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Motion Detection/E-mail Alerts
The Motion Detection feature will capture a short video and send it to your E-mail address
when motion is detected.
The LevelOne IP Network Camera will compare consecutive frames to detect changes caused
by the movement of large objects.
But the motion detector can also be triggered by:
•
•
Sudden changes in the level of available light
Movement of the camera itself.
Try to avoid these situations. The motion detection feature works best in locations where there
is good steady illumination, and the camera is mounted securely. It cannot be used outdoors
due to the sensitivity of the CMOS sensor.
To Use Motion Detection/E-mail Alert
1. Using the Web-based interface on the LevelOne IP Network Camera, select the User
screen.
2. Configure the Alerts section shown below.
Figure 18: Motion Detection/E-mail Alert
•
•
•
Check the box Send E-mail Alert when Motion Detected.
Enter the destination E-mail address in the Send to: field.
Enter a valid E-mail address in the Show "From" as field. The SMTP (Simple Mail
Transport Protocol) Server associated with this E-mail address is used to send the mail.
•
•
Enter a suitable Subject for the E-mail
Save (Apply) your changes.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
Web-based Management
4
This Chapter provides Setup details of the LevelOne IP Network Camera’s
Web-based Interface. This Chapter is for Administrators only.
Introduction
The LevelOne IP Network Camera can be configured using your Web Browser. The LevelOne
IP Network Camera must have an IP address which is compatible with your PC.
The recommended method to ensure this is to use the supplied Windows-based Wizard, as
described in the previous chapter.
Connecting to LevelOne IP Network Camera
•
If you have run the Windows-based setup Wizard, the final screen provided a button Web
UI. Clicking this button will immediately connect to the LevelOne IP Network Camera,
using your Web Browser.
•
•
If using only your Web Browser, use the following procedure to establish a connection
from your PC to the LevelOne IP Network Camera:
Once connected, you can add the LevelOne IP Network Camera to your Browser's
Favorites or Bookmarks.
Connecting using your Web Browser
1. Start your WEB browser.
2. In the Address box, enter "HTTP://" and the IP Address of the LevelOne IP Network
Camera, as in this example, which uses the LevelOne IP Network Camera's default IP
Address:
HTTP://192.168.0.99
3. If the Administrator ID and Password have been assigned, you will then be prompted for a
username and password. Enter the name and password you assigned.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome Screen
When you connect, the following screen will be displayed.
Figure 19: Welcome Screen
The menu options available from this screen are:
•
•
•
View Video - View live Video using your Web Browser.
Administration - Access the Administration menu.
Exit - Terminate the connection to the LevelOne IP Network Camera.
These options are explained in the following sections.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
View Video Screen
This screen is displayed when the View Video menu option is selected.
Figure 20: View Video Screen
•
If using Internet Explorer on Windows, you may see a prompt regarding an "ActiveX
control", like the example below.
You must allow this ActiveX control in order to view the Video. Click "Yes".
Figure 21 ActiveX Prompt
•
Video will start playing automatically. There may be a delay of a few seconds while the
video stream is buffered.
Using the "Connect" Option
The Connect feature on this screen allows you to connect to another LevelOne IP Network
Camera. To use this feature:
1. Enter the IP address of the other LevelOne IP Network Camera in the Enter new Camera
IP Address field.
2. Click the Connect button
3. A new browser window will open, and connect to the IP address you entered.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Administration Menu
Clicking on Administration on the menu provides access to all the settings for the LevelOne IP
Network Camera.
The Administration menu contains the following options:
•
•
•
•
•
System - Description, Date & Time
Network - All network and Wireless settings
Image - Adjust the Video image
Users - Administrator login, user database, and Motion Detection/E-mail alerts.
Status - Current Status information.
System Screen
After clicking Administration on the main menu, or selecting System on the Administration
menu, you will see a screen like the example below.
Figure 22: System Screen
Data - System Screen
System Settings
Device Name
Description
This displays the name for the LevelOne IP Network Camera.
This field is used for entering a description, such as the location of the
LevelOne IP Network Camera.
Time
Enter the current time.
Date
Enter the current date.
Timezone
Choose the timezone for your location from the drop-down list.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
NTP (Network Time Protocol)
Time Server
Enable or disable the Time Server feature as required.
If Enabled, the LevelOne IP Network Camera will contact a Network
Time Server at regular intervals and update its internal timer.
Server Address
Enter the address for the desired NTP server.
Update Schedule The Schedule determines how often the LevelOne IP Network Camera
contacts the NTP Server.
Select the desired options.
Network Screen
This screen is displayed when the Network menu option is clicked.
Figure 23: Network Screen
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Data - Network Screen
IP Setting
Obtain Address
Automatically
If selected, the LevelOne IP Network Camera will obtain its IP
address and related information from a DHCP Server.
Only select this option if your LAN has a DHCP Server. The fields
below can then be ignored.
Fixed IP Address
If selected, you must assign the following values to the LevelOne
IP Network Camera.
•
IP Address - Enter an unused IP address from the address
range used on your LAN.
•
•
•
Subnet Mask - Use the same value as PCs on your LAN.
Gateway - Use the same value as PCs on your LAN.
DNS Address - Use the same value as PCs on your LAN.
Wireless Setting (WCS-2000 only)
Mode
The Connection Mode determines the type of wireless
communication used by the LevelOne IP Network Camera.
•
•
If you have an Access Point, select Infrastructure.
Otherwise, select Ad-hoc.
Authentication Type Select the appropriate value - Open System or Shared Key, as used
on your LAN.
Note: In Infrastructure mode, either setting will normally work,
since most Access Points can use both methods.
ESSID
This must match the value used by other devices on your wireless
LAN.
Note! The ESSID is case sensitive.
Channel No.
•
•
•
In Infrastructure mode, this setting is ignored. The LevelOne
IP Network Camera will use the Channel set on the Access
Point.
For Ad-hoc mode, select the Channel you wish to use on your
LevelOne IP Network Camera. Other Wireless stations should
use the same setting.
If you experience interference (shown by lost connections
and/or slow data transfers) you may need to experiment with
different channels to see which one is the best.
WEP
This shows the current WEP setting.
•
•
This must match other Wireless stations on your LAN.
Click the Configure WEP button to change the WEP settings if
required.
DDNS
DDNS
Enable or disable the DDNS function, as required.
Only enable this feature if you have registered for the DDNS
Service with a DDNS Server provider. See the following section for
further details on using DDNS.
Service Provider
Choose a service provider from the list.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Host Name
Enter the host name (Domain Name) allocated to you by the DDNS
Server provider.
Account
Enter the login name for the DDNS account.
Enter the password for the DDNS account.
Password
Check WAN IP
Schedule
Set the schedule for checking if the Internet IP address has
changed. If the IP address has changed, the DDNS Server will be
notified.
Options
UPnP
Enable UPnP support if required. If Enabled, the LevelOne IP
Network Camera will broadcast its availability using UPnP. UPnP
compatible systems such as Windows XP will then be able to detect
the presence of the LevelOne IP Network Camera.
Second Port
Enable this feature if required. If enabled, then HTTP connections
(using your Web Browser or Media Player) can use this port
number instead of the standard HTTP port 80.
•
If you already have a Web Server on your LAN, then you
should enable the Second Port, and use this port number
instead of port 80.
•
If enabled, enter the desired port number to use for connections
to the LevelOne IP Network Camera. The default is 1024.
Using DDNS (Dynamic DNS)
Many internet connections use a "Dynamic IP address", where the Internet IP address is
allocated whenever the Internet connection is established.
This means that other Internet users don't know the IP address, so can't establish a connection.
DDNS is designed to solve this problem, as follows:
•
You must register for the DDNS service with a DDNS service provider. The DDNS
Service provider will allocate a Domain Name to you upon request.
•
•
The DDNS settings on the Network screen above must be correct.
The LevelOne IP Network Camera will then contact the DDNS server whenever it detects
that the Internet IP address has changed, and inform the DDNS server of the new IP
address. (The Check WAN IP Schedule determines how often the LevelOne IP Network
Camera checks if the Internet IP address has changed.)
This system allows other internet users to connect to you using the Domain Name allocated by
the DDNS service provider.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
WEP Screen (WCS-2000 only)
This screen is accessed by clicking the Configure WEP button on the Network screen. An
example WEP screen is shown below.
Figure 24: WEP Screen
Data - WEP Screen
WEP Encryption
WEP Encryption Select the option used on your Wireless LAN.
•
None - This is the default. If selected, data is NOT encrypted
before being transmitted.
•
64 Bit Encryption - If selected, data is encrypted, using the
default key, before being transmitted.
You must enter a default key.
Other Wireless stations must be set to use 64 Bit Encryption, and
have the same Key value in the same position in their key table.
•
128 Bit Encryption - If selected, data is encrypted, using the
default key, before being transmitted.
You must enter a default key.
Other Wireless stations must be set to use 128 Bit Encryption, and
have the same Key value in the same position in their key table.
Passphrase
The Passphrase feature will generate a Key from the phrase you enter,
which may be easier than entering keys in Hex (0~9 and A~F).
To use the Passphrase feature, enter the desired Passphrase in the field
provided, and click the Generate button.
Default Key
Key Value
Select a key to be used as the default key.
If WEP Encryption is used, you must enter at least one key value, for
the Default Key. All transmissions are encrypted using the Default Key.
Other wireless stations must use the same key value in the same
position in their key table. (It does not have to be selected as the default
key.)
25
Download from Www.Somanuals.com. All Manuals Search And Download.
The other key values are optional, and are used only for decrypting
data. This allows you to use different keys for transmitting and
receiving, if required.
When inputting a key value, follow these rules:
•
•
•
For 64 Bit Encryption, keys must be 10 characters.
For 128 Bit Encryption, keys must be 26 characters.
Keys must be entered in Hex.
Hex characters are A ~ F, and 0 ~ 9.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Image Screen
This screen is displayed when the Image menu option is clicked.
Figure 25: Image Screen
Data - Image Screen
Video Settings
Resolution
Select the desired video resolution format. A larger size requires
more bandwidth.
Image Quality
Select the desired image quality. Higher quality requires more
bandwidth.
Adjustment
Exposure
Select Automatic or Manual as required.
Manual Exposure
If Manual Exposure is selected, this field controls the exposure of
the Video image. Adjust it to the desired value.
If using Automatic Exposure, this field has no effect.
Red, Green, Blue
Options
Adjust these color settings to the preferred values.
Time Stamp
Enable the check box if you want the time to be displayed on the
Video image.
Text Overlay
If you want some text to be displayed on the Video image, enable
the check box and enter the desired text. This feature is often used
when multiple camera are installed, to identify each camera.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
User Screen
This screen is displayed when the User option on the Administration menu is clicked.
Figure 26: User Screen
Data - User Screen
Admin Login
Administrator ID
Enter the name for the Administrator login. Spaces, punctuation, and
special characters must NOT be used in the name.
When you connect to the LevelOne IP Network Camera, you will be
prompted for a name and password. Enter this name to login with
Administrator rights. Only the Administrator can change the
configuration; other users can only view the Video.
Password
The password for the Administrator login above.
Verify Password
User Access
Allow access by
Re-enter the password for the Administrator, to ensure it is correct.
•
•
Everyone - Anyone can view the Video stream.
Only users in database - Allow viewing only by people in the
user database. If selected, users will be prompted for a User
Name and Password when they attempt to view the Video.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
User Database
User List
This lists all users who currently exist.
Use the Add, Delete, and Modify buttons to manage this database.
Alerts
E-Mail Alert
Enable the checkbox if you want to send an E-Mail Alert when motion
is detected.
Note:
Motion detection can be triggered by rapid changes in the available
lighting, as well as by moving objects. For this reason, it should only
be used indoors where the available light is fairly constant.
Send to
Enter the E-Mail address for the receiver of the E-mail alert.
Show “From” as Enter the E-Mail address to be used as the Sender. This must be a
standard E-mail address, because the SMTP (Simple Mail Transport
Protocol) Server used to send the mail is derived from this address.
Subject
Enter the desired text to be shown as the "Subject" for the E-Mail.
Add/Modify User Screen
This screen is displayed when the Add or Modify button on the User screen is clicked. It is used
to enter details of each user.
Figure 27: Add/Modify User Screen
Data - Add/Modify User
User Name
Enter the name for the user. Spaces, punctuation, and special
characters must NOT be used in the name.
Also, names are case-insensitive (case is ignored), so you can NOT
use 2 names with the same spelling and different case.
User Password
The password for the user above.
Confirm Password
Re-enter the password, to ensure it is correct.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Status Screen
.
Figure 28: Status Screen
Data - Status Screen
Status
Device Name
This is the default name for the LevelOne IP Network Camera, and
cannot be changed.
Description
This displays the description you have entered.
MAC Address
The MAC address is the low-level network address, also called the
Network Adapter address or Physical Address.
IP Address
Network Mask
Gateway
The current IP address of the LevelOne IP Network Camera.
The network mask associated with the IP address above.
The address of your Router or Gateway.
F/W version
The version of the Firmware (software) currently installed on your
LevelOne IP Network Camera.
Current Viewers The number of users currently viewing the video stream generated by
the LevelOne IP Network Camera.
Log
System Log
The log displays internal operations of the LevelOne IP Network
Camera, and is mostly useful for troubleshooting.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Upgrade Firmware Screen
This screen is displayed when you click the Upgrade Firmware button on the Status screen.
Figure 29: Upgrade Firmware Screen
This screen allows you upgrade the Firmware (software) in your LevelOne IP Network
Camera. Before using this screen, your must download the upgrade file to your PC.
Then follow this procedure:
1. Click the Browse button, and locate the upgrade file.
2. Select this file, and click OK. The filename will then appear in the Upgrade File field.
3. Click the Start Upgrade button to transfer the file to the LevelOne IP Network Camera and
start the upgrade procedure.
Note:
•
•
The upgrade may take several minutes.
When the upgrade is completed, the LevelOne IP Network Camera will restart. This will
cause any existing connections to be terminated. Any users viewing or recording the video
will see this as an error.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5
Viewing & Recording
5
This Chapter describes how to view and record the live video stream
generated by the LevelOne IP Network Camera.
Overview
The recommended method to view video is to use the supplied Windows Viewing/Recording
utility.
Installation
1. Insert the supplied CD-ROM into your drive. If the setup program does not start
automatically, run Netcam_Setup.exe in the root folder. You will see the Welcome screen
shown below.
Figure 30: Welcome Screen
2. Click the Client Utility button to start the installation of the Viewing/Recording Utility.
3. Follow the prompts to complete the installation.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
System Tray Icon
When started, the program will create an icon in the Windows system tray on the taskbar, as
shown below.
Figure 31: System Tray Icon
This Icon has the following functions:
•
Animation - If a recording is in progress, this icon will be animated. Otherwise, it is
stationary.
•
Hover - Hovering your mouse over this icon will generate a pop-up informing you of the
current status.
•
•
Double-click - This will display the main screen, shown below.
Right Click - This provides a menu which allows you to view program details, view the
main screen, or terminate the program.
Main Screen
The main screen is displayed when the program first starts up. If you exit the program, you can
return to the main screen by double-clicking the system tray icon.
Figure 32: Main Screen
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Cameras - Camera List
•
•
•
•
The Camera List displays all LevelOne IP Network Camera you have defined. If you have
not defined any cameras, this list will be empty.
Click the Add Camera button to add a LevelOne IP Network Camera. See the following
section for further details.
Once some cameras are listed, you can select one and then use the Modify Camera, Delete
Camera and View buttons.
To view live video, select a camera and click the View button.
Recordings - Current Recordings
This panel lists all recording currently in progress, whether started directly, or by the scheduled
recording feature.
The Stop button can be used to terminate any recording currently in progress.
Adding Cameras to the Camera List
To add a camera to the Camera List, click the Add Camera button on the main screen. You will
see a screen like the example below.
•
The Cameras on LAN panel, on the left, displays all LevelOne IP Network Camera found
on your LAN. This list can be updated by clicking the Refresh button.
•
The Camera Data panel, on the right, displays the data for the selected camera.
Figure 33: Add Camera from LAN
To add a camera to the Camera List on the main screen:
1. Select a camera in the list on the left.
2. Check that the Camera Data shown on the right is correct. See below for details.
3. Click the Add button. The camera will now appear in the Camera List on the main screen.
Camera Data - LAN
Device Name
Description
Address
This is the default name for the LevelOne IP Network Camera, and
cannot be changed.
This displays the description entered by the LevelOne IP Network
Camera Administrator.
The current IP address of the LevelOne IP Network Camera.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Port Number
Login
This will normally display "80". Only change this if requested to do so
the LevelOne IP Network Camera Administrator.
The camera Administrator can require that users provide a username and
password before being allowed to view the live video.
•
If the Administrator has not enabled this option, the Login fields can
be left blank.
•
Otherwise, you must enter the username and password allocated to
your by Administrator.
Adding Cameras on the Internet
If the LevelOne IP Network Camera you wish to add is not on your LAN, but is available via
the Internet, click the Internet tab. You will see a screen like the example below.
Figure 34: Add Camera from Internet
To add a camera to the Camera List on the main screen:
1. Enter the Camera Data on the panel on the right. See below for details.
2. Click the Test button to check that a connection and login can be performed successfully.
3. Click the Add button. The camera will now appear in the Camera List on the main screen.
Camera Data - Internet
Device Name
This is the default name for the LevelOne IP Network Camera, and
cannot be changed.
This field will be displayed automatically once a connection to the
LevelOne IP Network Camera has been established.
Description
This displays the description entered by the LevelOne IP Network
Camera Administrator.
This field will be displayed automatically once a connection to the
LevelOne IP Network Camera has been established.
Address
Enter the Domain Name or Internet IP address of the desired LevelOne
IP Network Camera.
Port Number
Enter the port number used by the LevelOne IP Network Camera. The
LevelOne IP Network Camera Administrator can advise you of the port
to use. The default value is 1024.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Login
The camera Administrator can require that users provide a username and
password before being allowed to view the live video.
•
If the Administrator has not enabled this option, the Login fields can
be left blank.
•
Otherwise, you must enter the username and password allocated to
your by Administrator.
Modifying an Existing Camera
You can change the settings for an existing camera by selecting it in the Camera List on the
main screen, then clicking the Modify Camera button.
You will see a screen like the example below.
Figure 35: Modify Camera
•
•
Data on this screen is the same as for the Add Camera screens.
You can use the Test button to button to check that a connection and login can be
performed successfully.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Live Video
To view live video, select a camera in the Camera List on the main screen, and click the View
button. You will see a screen like the example below.
Figure 36 Viewing Live Video
Controls are provided to stop and start viewing, and to start recording the video stream.
Play
Record. While recording, this button will be red.
Stop
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Video
You can record Video while watching, or schedule recordings to occur when you are absent.
Recordings are stored in a standard Microsoft ASF file format, and can be played using
Microsoft Media Player.
Before doing any recording, you should review the Recording Preferences to ensure they are
suitable for your PC.
Recording Preferences
To set the Recording Preferences, click the Preferences button below the Recordings panel on
the main screen. You will see a screen like the example below.
Figure 37: Recording Preferences
If necessary, change these settings to suit your environment.
File Location
This is the Drive and Folder where recorded files will be placed. You
need a drive which has large amounts (Gigabytes) of free space.
Note that file names are automatically assigned, using the date and time.
Time Limit
This sets the maximum size of a recording which is started by clicking
the Record button on the View screen.
If the recording is not stopped manually, it will be terminated after the
time period indicated here.
Live Recordings
Recordings in progress are listed in the Recordings panel of the main screen.
Figure 38: Recording Panel
38
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
To Stop a recording in progress, select it and click the Stop button.
To Start a Recording, click the Record button on the View screen.
Figure 39 Viewing Live Video
Record Button. While recording, this button will be red.
Recorded Files
To view a list of all recorded files, click the Files button under the Recordings panel on the
main screen.
You will see a screen like the example below.
Figure 40: Recorded Files
This list shows all of the recorded files. The following operations are supported:
•
•
•
Play - Play the selected file in Microsoft Media Player.
Delete - Delete the selected file.
Explore - Open the folder containing these files, using Windows Explorer.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Scheduled Recordings
Recordings can be scheduled at any time, for any known LevelOne IP Network Camera. (Of
course, your PC must be on at the scheduled time.)
To use this feature, click the Schedule button under the Recordings panel on the main screen.
You will see a screen like the example below.
Figure 41: Scheduled Recording List
This screen lists all scheduled recordings. For each recording, the following data is shown.
•
•
Camera - The camera which will be recorded.
Date - The date the recording will be made. If the recording is repeated (weekly or
monthly), this is the date of the next recording.
•
•
Time - The time the recording will be made.
Type - Indicates if the recording is One Time, Everyday, or a particular day of the week.
If a scheduled recording is selected, the Modify and Delete buttons can be used to edit or delete
the selected entry.
Schedule Definition Screen
If the Add or Modify button is clicked, a screen like the following is displayed. You can then
enter or modify the details of this schedule.
Figure 42: Schedule Definition Screen
Data - Schedule Definition
Camera
Select the camera to be used. If the desired camera is not listed, you
must define by using the Add Camera button on the main screen.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Schedule Type
Select the desired option:
•
•
•
One Time - Only one (1) recording is made, on the specified date,
at the specified time.
Everyday - The recording is made every day, at the specified time.
The Start Day indicates when the first recording will be made.
Every Sunday, Every Monday, … - The recording is made on the
specified day each week. The Start Day indicates when the schedule
becomes active.
Start Day
Select the desired date. For a single recording, this is the day the
recording will be made. For daily (Everyday) recordings, this is the
starting date. For weekly recordings, this determines when the schedule
becomes active.
Start Time
Duration
Select the desired start time.
Enter or select the desired duration of the recording.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing with your Web Browser
The recommended method to view live video from the LevelOne IP Network Camera is use the
Windows utility.
However, you can also use your Web browser if necessary.
Viewing over your LAN
To establish a connection from your PC to the LevelOne IP Network Camera:
1. Start your WEB browser.
2. In the Address box, enter "HTTP://" and the IP Address of the LevelOne IP Network
Camera, as in this example, which uses the LevelOne IP Network Camera's default IP
Address:
HTTP://192.168.0.99
3. If the Administrator has enabled the user security feature, you will then be prompted for a
username and password.
Enter the name and password assigned to you by the LevelOne IP Network Camera
administrator.
4. When you connect, the following screen will be displayed.
Figure 43: Home Screen
5. Click View Video to see a screen like the example below.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 44: View Video in Browser
Video will start playing automatically. There may be a delay of a few seconds while the Video
stream is buffered.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing via the Internet
If LAN with the LevelOne IP Network Camera is connected to the Internet, and configured
correctly, you can connect to the LevelOne IP Network Camera via the Internet.
See Making Video available from the Internet in Chapter 3 for details of the required LAN
configuration.
To establish a connection from your PC to the LevelOne IP Network Camera via the Internet:
1. Obtain the Internet address and port number of the LevelOne IP Network Camera from the
Administrator.
2. Start your WEB browser.
3. In the Address box, enter the following:
HTTP://Internet_Address:port_number
Example using IP address:
HTTP://203.70.212.52:1024
Where the Router/Gateway's Internet IP address is 203.70.212.52and the "Second
Port" number on the LevelOne IP Network Camera is 1024.
Example using Domain Name:
HTTP://mycamera.dyndns.tv:1024
Where the Router/Gateway's Internet Domain name (using DDNS in this example) is
mycamera.dyndns.tvand the "Second Port" number on the LevelOne IP Network
Camera is 1024.
4. If the Administrator has enabled the user validation feature, you will then be prompted for
a username and password.
Enter the name and password assigned to you by the LevelOne IP Network Camera
administrator.
5. When you connect, the following screen will be displayed.
Figure 45: Home Screen
44
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Click View Video to see a screen like the example below.
Figure 46: View Video in Browser
Video will start playing automatically. There may be a delay of a few seconds while the Video
stream is buffered.
Note:
You need a broadband connection to view video effectively; dial-up connections are NOT
recommended.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6
Troubleshooting
6
This chapter covers the most likely problems and their solutions.
Overview
This chapter covers some common problems that may be encountered while using the
LevelOne IP Network Camera and some possible solutions to them. If you follow the
suggested steps and the LevelOne IP Network Camera still does not function properly, contact
your dealer for further advice.
Problems
Problem 1:
I can't connect to the LevelOne IP Network Camera with my Web
Browser to configure it.
Solution 1:
It is possible that your PC's IP address is not compatible with the IP
address of the LevelOne IP Network Camera.
Use the Windows utility to configure the LevelOne IP Network Camera
with a valid IP address.
Problem 2:
The Windows utility doesn't list any LevelOne IP Network Cameras.
Solution 2:
Check the following:
•
•
The LevelOne IP Network Camera is installed, LAN connections are
OK, it is powered ON and startup is complete.
Ensure that your PC and the LevelOne IP Network Camera are on the
same network segment. (If you don't have a router, this must be the
case.)
•
Ensure that your PC has the TCP/IP network protocol loaded. In
Windows, this is done by using Control Panel-Network. If an entry for
TCP/IP -> Network card is not listed, use Add - Protocol - Microsoft -
TCP/IP to add it.
You then need to select the new entry (TCP/IP -> Network card), click
Properties, and configure the IP Address tab.
•
If your LAN has a DHCP Server, you can select "Obtain an IP
Address automatically".
•
Otherwise, you must select "Specify an IP Address", and enter
values for IP Address, Subnet Mask, and Gateway. All devices on
your LAN must use compatible values. Remember that each
device needs a unique IP Address, and the same Subnet Mask.
Problem 3
When I try to connect to the LevelOne IP Network Camera, I get
prompted for a user name and password.
Solution 3
You SHOULD be prompted for a user name and password if trying to
access the Administration menu.
Enter the Administrator ID and Password set on the User screen.
If you are just trying to view Video, the User Name/Password prompt
46
Download from Www.Somanuals.com. All Manuals Search And Download.
indicates that the Administrator has restricted access to specified users.
Ask the Administrator for your User Name and Password.
Problem 4
I can't connect to the LevelOne IP Network Camera using a Wireless
connection.
Check that your PC and the LevelOne IP Network Camera have
compatible Wireless settings.
Solution 4
•
•
•
•
Mode (Infrastructure or Ad-hoc) must be correct.
ESSID must match.
WEP settings must match.
In Ad-hoc mode, the Channel should match, although this is often not
required.
Problem 5
Video quality may suddenly deteriorate.
This can happen when an additional viewer connects to the LevelOne IP
Network Camera, overloading the camera or the available bandwidth. The
image size and quality can be adjusted to cater for the required number of
viewers and the available bandwidth.
Solution 5
The motion detection feature doesn't send me any E-mails.
Problem 6
It may be that the SMTP (Simple Mail Transport Protocol) server used by
the LevelOne IP Network Camera to send the E-mail will not accept mail
from the LevelOne IP Network Camera. Try using a different SMTP
server. The LevelOne IP Network Camera derives the address of the SMTP
server from the E-mail address you enter in the Show "From" as: field.
Solution 6
Using the motion detection feature, I receive E-mails which don't show
any moving objects.
Problem 7
The motion detection feature doesn't actually detect motion. It compares
frames to see if they are different. Major differences between frames are
assumed to be caused by moving objects.
Solution 7
But the motion detector can also be triggered by:
•
•
Sudden changes in the level of available light
Movement of the camera itself.
Try to avoid these situations. The motion detection feature works best in
locations where there is good steady illumination, and the camera is
mounted securely. This feature can NOT be used if the camera is outdoors.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A
Specifications
FCS-1000
Model
FCS-1000 LevelOne IP Network Camera
Dimensions
164 mm (L) * 88 mm (W)* 53.5 mm (H)
6.4 inch (L) * 3.5 inch (W) * 2.1 inch (H)
Operating
Temperature
0° C to 40° C
Storage Temperature
Network Protocols:
Network Interface:
Wireless interface
LEDs
-10° C to 70° C
TCP/IP, DHCP, SMTP, NTP, HTTP
1 Ethernet10/100BaseT (RJ45) LAN connection
IEEE 802.11b compatible, WEP security support, roaming support
3
Power Adapter
5V DC External
WCS-2000
Model
WCS-2000 LevelOne IP Network Camera
Dimensions
164 mm (L) * 88 mm (W)* 53.5 mm (H)
6.4 inch (L) * 3.5 inch (W) * 2.1 inch (H)
Operating
Temperature
0° C to 40° C
Storage Temperature
Network Protocols:
Network Interface:
-10° C to 70° C
TCP/IP, DHCP, SMTP, NTP, HTTP
1 Ethernet 10/100BaseT (RJ45) LAN connection
802.11b Wireless Interface
Wireless interface
LEDs
IEEE 802.11b compatible, WEP security support, roaming support
4
Power Adapter
Wireless Interface
5V DC External
802.11b, Infrastrstructure/Ad-hoc mode, WEP support.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this equipment.
(Example - use only shielded interface cables when connecting to computer or peripheral
devices).
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
CE Marking Warning
This is a Class B product. In a domestic environment this product may cause radio interference
in which case the user may be required to take adequate measures.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright Notice
Many software components are covered by the GNU GPL (General Public License). Some are
covered by other Licenses as listed in the table below.
Details of each applicable license are in contained in the following section.
No Warranty
THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS''
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
Network Camera copyright information
Package source codes
License
GPL
rrload
GPL
uClinux-2.0.38.1pre7
busybox-0.61pre
GPL
GPL
GPL
tinylogin-1.00pre
inetutils-1.3.2
thttpd-2.20b-rr
uClibc-0.9.5
See following
LGPL
Wireless driver
Lan driver (DM9000)
cgi-lib
GPL
GPL
Copyright cgi-LIB
Free SW
Cgihtml
Ntp-4.1.0-4.src.rpm
GPL
Cron-small version
Dhcpcd-1.3.20-p10
Smtpclient-1.0.0
Upnpsdk-1.0.4
GPL
GPL
GPL
GPL
GPL
ez-ipupdate-3.0.11b7
50
Download from Www.Somanuals.com. All Manuals Search And Download.
thttpd License
Copyright 1995,1998,1999,2000 by Jef Poskanzer <jef@acme.com>. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted
provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions
and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials provided
with the distribution.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS''
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
cgi-LIB Copyright Notice
Author: Noel V Aguilar
Version: 1.4
Filename: cgi-lib.h
Program Library: CGI-LIB
Feel free to use, copy, reference, or modify this program in any way.
Support public domain freeware.
For updates or to report bugs go to my home page
The web page for the library is:
Disclaimer
THE INFORMATION, CODE AND EXECUTABLE PROVIDED ARE PROVIDED "AS IS"
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL NOEL V AGUILAR
BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT,
INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL
DAMAGES. ALL THE INFORMATION, CODE AND EXECUTABLES ARE FOR
EDUCATIONAL PURPOSES ONLY.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
GNU General Public License
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but
changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it.
By contrast, the GNU General Public License is intended to guarantee your freedom to share
and change free software--to make sure the software is free for all its users. This General
Public License applies to most of the Free Software Foundation's software and to any other
program whose authors commit to using it. (Some other Free Software Foundation software is
covered by the GNU Library General Public License instead.) You can apply it to your
programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public
Licenses are designed to make sure that you have the freedom to distribute copies of free
software (and charge for this service if you wish), that you receive source code or can get it if
you want it, that you can change the software or use pieces of it in new free programs; and that
you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights
or to ask you to surrender the rights. These restrictions translate to certain responsibilities for
you if you distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must
give the recipients all the rights that you have. You must make sure that they, too, receive or
can get the source code. And you must show them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license
which gives you legal permission to copy, distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain that everyone understands
that there is no warranty for this free software. If the software is modified by someone else and
passed on, we want its recipients to know that what they have is not the original, so that any
problems introduced by others will not reflect on the original authors' reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the
danger that redistributors of a free program will individually obtain patent licenses, in effect
making the program proprietary. To prevent this, we have made it clear that any patent must
be licensed for everyone's free use or not licensed at all. The precise terms and conditions for
copying, distribution and modification follow.
GNU GENERAL PUBLIC LICENSE
Terms And Conditions For Copying, Distribution And Modification
0. This License applies to any program or other work which contains a notice placed by the
copyright holder saying it may be distributed under the terms of this General Public License.
The "Program", below, refers to any such program or work, and a "work based on the
Program" means either the Program or any derivative work under copyright law: that is to say,
a work containing the Program or a portion of it, either verbatim or with modifications and/or
53
Download from Www.Somanuals.com. All Manuals Search And Download.
translated into another language. (Hereinafter, translation is included without limitation in the
term "modification".) Each licensee is addressed as "you".
Activities other than copying, distribution and modification are not covered by this License;
they are outside its scope. The act of running the Program is not restricted, and the output from
the Program is covered only if its contents constitute a work based on the Program
(independent of having been made by running the Program). Whether that is true depends on
what the Program does.
1. You may copy and distribute verbatim copies of the Program's source code as you receive it,
in any medium, provided that you conspicuously and appropriately publish on each copy an
appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to
this License and to the absence of any warranty; and give any other recipients of the Program a
copy of this License along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option
offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a
work based on the Program, and copy and distribute such modifications or work under the
terms of Section 1 above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices stating that you changed the
files and the date of any change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or
is derived from the Program or any part thereof, to be licensed as a whole at no charge to all
third parties under the terms of this License.
c) If the modified program normally reads commands interactively when run, you must cause
it, when started running for such interactive use in the most ordinary way, to print or display an
announcement including an appropriate copyright notice and a notice that there is no warranty
(or else, saying that you provide a warranty) and that users may redistribute the program under
these conditions, and telling the user how to view a copy of this License. (Exception: if the
Program itself is interactive but does not normally print such an announcement, your work
based on the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If identifiable sections of that
work are not derived from the Program, and can be reasonably considered independent and
separate works in themselves, then this License, and its terms, do not apply to those sections
when you distribute them as separate works. But when you distribute the same sections as part
of a whole which is a work based on the Program, the distribution of the whole must be on the
terms of this License, whose permissions for other licensees extend to the entire whole, and
thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section
to claim rights or contest your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or collective works based on the
Program.
In addition, mere aggregation of another work not based on the Program with the Program (or
with a work based on the Program) on a volume of a storage or distribution medium does not
bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object
code or executable form under the terms of Sections 1 and 2 above provided that you also do
one of the following:
54
Download from Www.Somanuals.com. All Manuals Search And Download.
a) Accompany it with the complete corresponding machine-readable source code, which must
be distributed under the terms of Sections 1 and 2 above on a medium customarily used for
software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a
charge no more than your cost of physically performing source distribution, a complete
machine-readable copy of the corresponding source code, to be distributed under the terms of
Sections 1 and 2 above on a medium customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer to distribute corresponding
source code. (This alternative is allowed only for noncommercial distribution and only if you
received the program in object code or executable form with such an offer, in accord with
Subsection b above.)
The source code for a work means the preferred form of the work for making modifications to
it. For an executable work, complete source code means all the source code for all modules it
contains, plus any associated interface definition files, plus the scripts used to control
compilation and installation of the executable. However, as a special exception, the source
code distributed need not include anything that is normally distributed (in either source or
binary form) with the major components (compiler, kernel, and so on) of the operating system
on which the executable runs, unless that component itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a
designated place, then offering equivalent access to copy the source code from the same place
counts as distribution of the source code, even though third parties are not compelled to copy
the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly
provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute
the Program is void, and will automatically terminate your rights under this License. However,
parties who have received copies, or rights, from you under this License will not have their
licenses terminated so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing
else grants you permission to modify or distribute the Program or its derivative works. These
actions are prohibited by law if you do not accept this License. Therefore, by modifying or
distributing the Program (or any work based on the Program), you indicate your acceptance of
this License to do so, and all its terms and conditions for copying, distributing or modifying the
Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient
automatically receives a license from the original licensor to copy, distribute or modify the
Program subject to these terms and conditions. You may not impose any further restrictions on
the recipients' exercise of the rights granted herein. You are not responsible for enforcing
compliance by third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any
other reason (not limited to patent issues), conditions are imposed on you (whether by court
order, agreement or otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot distribute so as to satisfy
simultaneously your obligations under this License and any other pertinent obligations, then as
a consequence you may not distribute the Program at all. For example, if a patent license
would not permit royalty-free redistribution of the Program by all those who receive copies
55
Download from Www.Somanuals.com. All Manuals Search And Download.
directly or indirectly through you, then the only way you could satisfy both it and this License
would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular
circumstance, the balance of the section is intended to apply and the section as a whole is
intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right
claims or to contest validity of any such claims; this section has the sole purpose of protecting
the integrity of the free software distribution system, which is implemented by public license
practices. Many people have made generous contributions to the wide range of software
distributed through that system in reliance on consistent application of that system; it is up to
the author/donor to decide if he or she is willing to distribute software through any other
system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the
rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by
patents or by copyrighted interfaces, the original copyright holder who places the Program
under this License may add an explicit geographical distribution limitation excluding those
countries, so that distribution is permitted only in or among countries not thus excluded. In
such case, this License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General
Public License from time to time. Such new versions will be similar in spirit to the present
version, but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Program specifies a version
number of this License which applies to it and "any later version", you have the option of
following the terms and conditions either of that version or of any later version published by
the Free Software Foundation. If the Program does not specify a version number of this
License, you may choose any version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution
conditions are different, write to the author to ask for permission. For software which is
copyrighted by the Free Software Foundation, write to the Free Software Foundation; we
sometimes make exceptions for this. Our decision will be guided by the two goals of
preserving the free status of all derivatives of our free software and of promoting the sharing
and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO
WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE
LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY
56
Download from Www.Somanuals.com. All Manuals Search And Download.
AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM
PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY
MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE
LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH
ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Lesser GNU General Public License
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but
changing it is not allowed.
[This is the first released version of the Lesser GPL. It also counts as the successor of the
GNU Library Public License, version 2, hence the version number 2.1.]
Preamble
The licenses for most software are designed to take away your freedom to share and change it.
By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share
and change free software--to make sure the software is free for all its users.
This license, the Lesser General Public License, applies to some specially designated software
packages--typically libraries--of the Free Software Foundation and other authors who decide to
use it. You can use it too, but we suggest you first think carefully about whether this license or
the ordinary General Public License is the better strategy to use in any particular case, based on
the explanations below.
When we speak of free software, we are referring to freedom of use, not price. Our General
Public Licenses are designed to make sure that you have the freedom to distribute copies of
free software (and charge for this service if you wish); that you receive source code or can getit
if you want it; that you can change the software and use pieces of it in new free programs; and
that you are informed that you can do these things.
To protect your rights, we need to make restrictions that forbid distributors to deny you these
rights or to ask you to surrender these rights. These restrictions translate to certain
responsibilities for you if you distribute copies of the library or if you modify it.
For example, if you distribute copies of the library, whether gratis or for a fee, you must give
the recipients all the rights that we gave you. You must make sure that they, too, receive or can
get the source code. If you link other code with the library, you must provide complete object
files to the recipients, so that they can relink them with the library after making changes to the
library and recompiling it. And you must show them these terms so they know their rights.
We protect your rights with a two-step method: (1) we copyright the
library, and (2) we offer you this license, which gives you legal permission to copy, distribute
and/or modify the library.
To protect each distributor, we want to make it very clear that there is no warranty for the free
library. Also, if the library is modified by someone else and passed on, the recipients should
know that what they have is not the original version, so that the original author's reputation will
not be affected by problems that might be introduced by others.
Finally, software patents pose a constant threat to the existence of any free program. We wish
to make sure that a company cannot effectively restrict the users of a free program by obtaining
58
Download from Www.Somanuals.com. All Manuals Search And Download.
a restrictive license from a patent holder. Therefore, we insist that any patent license obtained
for a version of the library must be consistent with the full freedom of use specified in this
license.
Most GNU software, including some libraries, is covered by the ordinary GNU General Public
License. This license, the GNU Lesser General Public License, applies to certain designated
libraries, and is quite different from the ordinary General Public License. We use this license
for certain libraries in order to permit linking those libraries into non-free programs.
When a program is linked with a library, whether statically or using a shared library, the
combination of the two is legally speaking a combined work, a derivative of the original
library. The ordinary General Public License therefore permits such linking only if the entire
combination fits its criteria of freedom. The Lesser General Public License permits more lax
criteria for linking other code with the library.
We call this license the "Lesser" General Public License because it does Less to protect the
user's freedom than the ordinary Genera Public License. It also provides other free software
developers Less of an advantage over competing non-free programs. These disadvantages are
the reason we use the ordinary General Public License for many libraries. However, the Lesser
license provides advantages in certain special circumstances.
For example, on rare occasions, there may be a special need to encourage the widest possible
use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free
programs must be allowed to use the library. A more frequent case is that a free library does
the same job as widely used non-free libraries. In this case, there is little to gain by limiting the
free library to free software only, so we use the Lesser General Public License.
In other cases, permission to use a particular library in non-free programs enables a greater
number of people to use a large body of free software. For example, permission to use the
GNU C Library in non-free programs enables many more people to use the whole GNU
operating system, as well as its variant, the GNU/Linux operating system.
Although the Lesser General Public License is Less protective of the users' freedom, it does
ensure that the user of a program that is linked with the Library has the freedom and the
wherewithal to run that program using a modified version of the Library.
The precise terms and conditions for copying, distribution and modification follow. Pay close
attention to the difference between a "work based on the library" and a "work that uses the
library". The former contains code derived from the library, whereas the latter must be
combined with the library in order to run.
GNU LESSER GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND
MODIFICATION
0. This License Agreement applies to any software library or other program which contains a
notice placed by the copyright holder or other authorized party saying it may be distributed
under the terms of this Lesser General Public License (also called "this License").Each licensee
is addressed as "you".
A "library" means a collection of software functions and/or data prepared so as to be
conveniently linked with application programs(which use some of those functions and data) to
form executables.
The "Library", below, refers to any such software library or work which has been distributed
under these terms. A "work based on the Library" means either the Library or any derivative
work under copyright law: that is to say, a work containing the Library or a portion of it, either
59
Download from Www.Somanuals.com. All Manuals Search And Download.
verbatim or with modifications and/or translated straightforwardly into another language.
(Hereinafter, translation is included without limitation in the term "modification".)
"Source code" for a work means the preferred form of the work for making modifications to it.
For a library, complete source code means all the source code for all modules it contains, plus
any associated interface definition files, plus the scripts used to control compilation and
installation of the library.
Activities other than copying, distribution and modification are not covered by this License;
they are outside its scope. The act of running a program using the Library is not restricted, and
output from such a program is covered only if its contents constitute a work based on the
Library (independent of the use of the Library in a tool for writing it). Whether that is true
depends on what the Library does and what the program that uses the Library does.
1. You may copy and distribute verbatim copies of the Library's complete source code as you
receive it, in any medium, provided that you conspicuously and appropriately publish on each
copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that
refer to this License and to the absence of any warranty; and distribute a copy of this License
along with the Library. You may charge a fee for the physical act of transferring a copy, and
you may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work
based on the Library, and copy and distribute such modifications or work under the terms of
Section 1above, provided that you also meet all of these conditions:
a) The modified work must itself be a software library.
b) You must cause the files modified to carry prominent notices stating that you changed the
files and the date of any change.
c) You must cause the whole of the work to be licensed at no charge to all third parties under
the terms of this License.
d) If a facility in the modified Library refers to a function or a table of data to be supplied by an
application program that uses the facility, other than as an argument passed when the facility is
invoked, then you must make a good faith effort to ensure that, in the event an application does
not supply such function or table, the facility still operates, and performs whatever part of its
purpose remains meaningful.
(For example, a function in a library to compute square roots has a purpose that is entirely
well-defined independent of the application. Therefore, Subsection 2d requires that any
application-supplied function or table used by this function must be optional: if the application
does not supply it, the square root function must still compute square roots.)
These requirements apply to the modified work as a whole. If identifiable sections of that
work are not derived from the Library, and can be reasonably considered independent and
separate works in themselves, then this License, and its terms, do not apply to those sections
when you distribute them as separate works. But when you distribute the same sections as part
of a whole which is a work based on the Library, the distribution of the whole must be on the
terms of this License, whose permissions for other licensees extend to the entire whole, and
thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written
entirely by you; rather, the intent is to exercise the right to control the distribution of derivative
or collective works based on the Library.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
In addition, mere aggregation of another work not based on the Library with the Library (or
with a work based on the Library) on a volume of a storage or distribution medium does not
bring the other work under the scope of this License.
3. You may opt to apply the terms of the ordinary GNU General Public License instead of this
License to a given copy of the Library. To do this, you must alter all the notices that refer to
this License, so that they refer to the ordinary GNU General Public License, version 2, instead
of to this License. (If a newer version than version 2 of the ordinary GNU General Public
License has appeared, then you can specify that version instead if you wish.) Do not make any
other change in these notices.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU
General Public License applies to all subsequent copies and derivative works made from that
copy.
This option is useful when you wish to copy part of the code of the Library into a program that
is not a library.
4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in
object code or executable form under the terms of Sections 1 and 2 above provided that you
accompany it with the complete corresponding machine-readable source code, which must be
distributed under the terms of Sections 1 and 2 above on a medium customarily used for
software interchange.
If distribution of object code is made by offering access to copy from a designated place, then
offering equivalent access to copy the source code from the same place satisfies the
requirement to distribute the source code, even though third parties are not compelled to copy
the source along with the object code.
5. A program that contains no derivative of any portion of the Library, but is designed to work
with the Library by being compiled or linked with it, is called a "work that uses the Library".
Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the
scope of this License.
However, linking a "work that uses the Library" with the Library creates an executable that is a
derivative of the Library (because it contains portions of the Library), rather than a "work that
uses the library". The executable is therefore covered by this License. Section 6 states terms
for distribution of such executables.
When a "work that uses the Library" uses material from a header file that is part of the Library,
the object code for the work may be a derivative work of the Library even though the source
code is not. Whether this is true is especially significant if the work can be linked without the
Library, or if the work is itself a library. The threshold for this to be true is not precisely
defined by law.
If such an object file uses only numerical parameters, data structure layouts and accessories,
and small macros and small inline functions (ten lines or less in length), then the use of the
object file is unrestricted, regardless of whether it is legally a derivative work. (Executables
containing this object code plus portions of the Library will still fall under Section 6.)
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the
work under the terms of Section 6.Any executables containing that work also fall under Section
6,whether or not they are linked directly with the Library itself.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
6. As an exception to the Sections above, you may also combine or link a "work that uses the
Library" with the Library to produce a work containing portions of the Library, and distribute
that work under terms of your choice, provided that the terms permit modification of the work
for the customer's own use and reverse engineering for debugging such modifications.
You must give prominent notice with each copy of the work that the Library is used in it and
that the Library and its use are covered by this License. You must supply a copy of this
License. If the work during execution displays copyright notices, you must include the
copyright notice for the Library among them, as well as a reference directing the user to the
copy of this License. Also, you must do one of these things:
a) Accompany the work with the complete corresponding machine-readable source code for the
Library including whatever changes were used in the work (which must be distributed under
Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the
complete machine-readable "work that uses the Library", as object code and/or source code, so
that the user can modify the Library and then relink to produce a modified executable
containing the modified Library. (It is understood that the user who changes the contents of
definitions files in the Library will not necessarily be able to recompile the application to use
the modified definitions.)
b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism
is one that (1) uses at run time a copy of the library already present on the user's computer
system, rather than copying library functions into the executable, and (2) will operate properly
with a modified version of the library, if the user installs one, as long as the modified version is
interface-compatible with the version that the work was made with.
c) Accompany the work with a written offer, valid for at least three years, to give the same user
the materials specified in Subsection 6a, above, for a charge no more than the cost of
performing this distribution.
d) If distribution of the work is made by offering access to copy from a designated place, offer
equivalent access to copy the above specified materials from the same place.
e) Verify that the user has already received a copy of these materials or that you have already
sent this user a copy.
For an executable, the required form of the "work that uses the Library" must include any data
and utility programs needed for reproducing the executable from it. However, as a special
exception, the materials to be distributed need not include anything that is normally distributed
(in either source or binary form) with the major components (compiler, kernel, and so on) of
the operating system on which the executable runs, unless that component itself accompanies
the executable.
It may happen that this requirement contradicts the license restrictions of other proprietary
libraries that do not normally accompany the operating system. Such a contradiction means
you cannot use both them and the Library together in an executable that you distribute.
7. You may place library facilities that are a work based on the Library side-by-side in a single
library together with other library facilities not covered by this License, and distribute such a
combined library, provided that the separate distribution of the work based on the Library and
of the other library facilities is otherwise permitted, and provided that you do these two things:
a) Accompany the combined library with a copy of the same work based on the Library,
uncombined with any other library facilities. This must be distributed under the terms of the
Sections above.
b) Give prominent notice with the combined library of the fact that part of it is a work based on
the Library, and explaining where to find the accompanying uncombined form of the same
work.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
8. You may not copy, modify, sublicense, link with, or distribute the Library except as
expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link
with, or distribute the Library is void, and will automatically terminate your rights under this
License. However, parties who have received copies, or rights, from you under this License
will not have their licenses terminated so long as such parties remain in full compliance.
9. You are not required to accept this License, since you have not signed it. However, nothing
else grants you permission to modify or distribute the Library or its derivative works. These
actions are prohibited by law if you do not accept this License. Therefore, by modifying or
distributing the Library (or any work based on the Library), you indicate your acceptance of
this License to do so, and all its terms and conditions for copying, distributing or modifying the
Library or works based on it.
10. Each time you redistribute the Library (or any work based on the Library), the recipient
automatically receives a license from the original licensor to copy, distribute, link with or
modify the Library subject to these terms and conditions. You may not impose any further
restrictions on the recipients' exercise of the rights granted herein. You are not responsible for
enforcing compliance by third parties with this License.
11. If, as a consequence of a court judgment or allegation of patent infringement or for any
other reason (not limited to patent issues), conditions are imposed on you (whether by court
order, agreement or otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot distribute so as to satisfy
simultaneously your obligations under this License and any other pertinent obligations, then as
a consequence you may not distribute the Library at all. For example, if a patent license would
not permit royalty-free redistribution of the Library by all those who receive copies directly or
indirectly through you, then the only way you could satisfy both it and this License would be to
refrain entirely from distribution of the Library. If any portion of this section is held invalid or
unenforceable under any particular circumstance, the balance of the section is intended to
apply, and the section as a whole is intended to apply in other circumstances. It is not the
purpose of this section to induce you to infringe any patents or other property right claims or to
contest validity of any such claims; this section has the sole purpose of protecting the integrity
of the free software distribution system which is implemented by public license practices.
Many people have made generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that system; it is up to the
author/donor to decide if he or she is willing to distribute software through any other system
and a licensee cannot impose that choice. This section is intended to make thoroughly clear
what is believed to be a consequence of the rest of this License.
12. If the distribution and/or use of the Library is restricted in certain countries either by
patents or by copyrighted interfaces, the original copyright holder who places the Library under
this License may add an explicit geographical distribution limitation excluding those countries,
so that distribution is permitted only in or among countries not thus excluded. In such case, this
License incorporates the limitation as if written in the body of this License.
13. The Free Software Foundation may publish revised and/or new versions of the Lesser
General Public License from time to time. Such new versions will be similar in spirit to the
present version, but may differ in detail to address new problems or concerns. Each version is
given a distinguishing version number. If the Library specifies a version number of this
License which applies to it and "any later version", you have the option of following the terms
63
Download from Www.Somanuals.com. All Manuals Search And Download.
and conditions either of that version or of any later version published by the Free Software
Foundation. If the Library does not specify a license version number, you may choose any
version ever published by the Free Software Foundation.
14. If you wish to incorporate parts of the Library into other free programs whose distribution
conditions are incompatible with these, write to the author to ask for permission. For software
which is copyrighted by the Free Software Foundation, write to the Free Software Foundation;
we sometimes make exceptions for this. Our decision will be guided by the two goals of
preserving the free status of all derivatives of our free software and of promoting the sharing
and reuse of software generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE
LAW.
EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS
AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND
PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE
DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR
OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY
MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE
LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH
ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
64
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Lexmark Network Card x560 User Manual
LG Electronics Projector RD JT91 User Manual
LG Electronics Refrigerator LMX28988 User Manual
Life Fitness Bicycle 93CW User Manual
Lincoln Electric Welding System CV 305 User Manual
Linear Car Stereo System M3300CD User Manual
Lochinvar Water Heater 151 801 User Manual
Magnavox DVD VCR Combo MWD2206 User Manual
M Audio Headphones gd_060903 User Manual
Metabo Air Compressor MEGA 450D User Manual