Leupold & Stevens
P.O. Box 688
Beaverton, OR 97075 USA
1 (800) LEUPOLD (538-7653)
Leupold & Stevens
14400 NW Greenbrier Parkway
Beaverton, OR 97006 USA
www.leupold.com
(503) 526-1400
Download from Www.Somanuals.com. All Manuals Search And Download.
PART # 59809 ARTWORK # 59458
You’re Part of the Tradition
In a sport rich in tradition, Leupold® has earned its place as one of the classic
Marcus Leupold’s quest for quality has continued on to the present. In the
words of the firm’s founder, Frederick Leupold, “We solemnly promise never
to let down on quality; the customer is entitled to a square deal.” This is why
we build every Leupold Golden Ring product to be worthy of the Leupold Full
Lifetime Guarantee. It’s the best customer protection in the business, and it’s
the best way we know to thank you for buying Leupold.
names in hunting and shooting. To be sure, the Golden Ring® scope you now
own is the finest example of Leupold heritage.
3
Frederick Leupold came to Portland, Oregon, from Germany in 1907, and
quickly established a firm to manufacture and repair surveying transits. Fred’s
son, Marcus, broadened the company’s focus in the late 1930s after the avid
outdoorsman missed a buck on the soggy western slopes of Oregon’s Cascade
Range. (His scope had fogged, as was common for scopes of that era.)
Frustrated by the experience, Marcus set out to build a better scope. The rest,
as they say, is history.
Download from Www.Somanuals.com. All Manuals Search And Download.
Know Your Scope
PARTS oF THE SCoPE
4. The ocular lens (or eyepiece lens) works with the other lenses to
magnify the image, provide correct eye relief, and make
diopter corrections.
Riflescopes have become far more sophisticated over the years, but
the four most basic parts have remained the same. Working from
front to back they are:
4
1. The objective lens (or front lens) is critical to a superior
sight picture.
2. The internal erector lenses which right the image.
3. The reticle, often referred to as the crosshair, provides the
aiming point.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
7
8
5
6
2
1
HoW SCoPES WoRK
As light passes through and beyond the objective lens, the
resulting upside down image is sent to the internal lenses.
Known as erector lenses, these internal lenses return the im-
age to a right-side-up position. Finally, the ocular lens makes
a final enlargement of that image and sends it on to your eye.
Your Leupold scope was designed, manufactured, and tested
10
5
9
to ensure that, when properly mounted and sighted-in
1
Objective Lens
4
5
Erector Lenses
8
9
Eyepiece Assembly
Reticle Housing
on your firearm, you will enjoy exceptional performance.
A solid mount is critical to satisfactory performance of your
scope. If you have problems or questions, please contact
Leupold Product Service (see page 39).
Power Selector Ring
Eyepiece Lock Ring
Ocular Lens
2
Windage Adjustment
(opposite side of scope)
6
10 Side Parallax Adjustment
3
Elevation Adjustment
7
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Install the Scope
THE LoWER THE SCoPE, THE BETTER
PLEASE READ THIS ENTIRE HANDBooK
A scope mounted close to the rifle ensures proper cheek weld on
the stock for a stable firing position and allows for rapid target
acquisition. We recommend using the lowest possible ring height.
No specific clearance is required, but the scope must clear the bolt
handle, hammer (on lever actions and handguns), sights, and
barrel.
BEFoRE MoUNTINg YoUR SCoPE.
6
C A U T I O N
When installed, be sure that your scope does not interfere with
firearm operation and does not contact anything except the
mount rings.
Always check and be certain that the firearm is unloaded
before undertaking any work upon it.
Download from Www.Somanuals.com. All Manuals Search And Download.
NoTE: Use care in mounting the 2.5x28mm Scout riflescope. It is
necessary to place the back edge of the rearmost ring at least 3/4" for-
ward of the ocular bell/tube juncture to avoid possible reticle damage.
Because of the longer eye relief of this product, mounting the scope
back slightly will not in any way impair its function or effectiveness.
INSTALLINg THE BASE, RINgS, AND SCoPE
Please refer to the instructions included with the base and rings for
their proper installation on the firearm.
If necessary, it is safe to position the rear mount ring directly on the
exposed threaded area near the eyepiece, but only after focusing the
eyepiece. This allows a more forward placement of the scope. See
7
page 8 for more details.
NoTE: The windage and elevation adjustments on new Leupold scopes
are centered as part of the assembly process. If you are mounting
a scope that was previously mounted on another rifle, you should
center the adjustments (please see “Zeroing Windage and Elevation
Adjustments” on page 20 for more details).
Download from Www.Somanuals.com. All Manuals Search And Download.
ESTABLISHINg EYE RELIEF oN
RIFLES AND SHoTgUNS
3. Position your scope here for maximum eye relief.
Because of the safety considerations associated with proper eye
relief, Leupold strongly recommends that you mount your scope as
far forward as possible. Beyond that, follow these steps:
4. Proceed to CoMPLETINg THE INSTALLATIoN.
NoTE: To confirm that your scope is mounted in the best possible
position, try assuming various positions: kneeling, seated, prone, and
aiming both uphill and downhill. Remember that aiming uphill typically
reduces eye relief. Wearing hunting/shooting specific clothing is
recommended as this may alter eye relief considerations slightly.
1. With the scope as far forward in the mounts as possible, hold
the rifle in your normal shooting position. (Variable power
scopes should be set at the highest magnification for this
process.)
8
2. Slowly move the scope to the rear just until you can see a full
field-of-view.
Download from Www.Somanuals.com. All Manuals Search And Download.
W A R N I N G
If a scope is mounted too far to the rear, the eyepiece
can injure the shooter’s brow. Shooting at an uphill angle
also increases this hazard because it shortens the dis-
tance between the brow and the rear of the scope. For
this reason, Leupold scopes are engineered to provide
generous eye relief. Therefore, when mounting your
scope, we recommend positioning it as far forward in
the mounts as possible to take full advantage of this
generous eye relief.
9
Leupold riflescopes are engineered to provide a generous 3" to 5"
eye relief, depending on the model and the magnification level.
Download from Www.Somanuals.com. All Manuals Search And Download.
ESTABLISHINg EYE RELIEF oN HANDgUN SCoPES
Since handguns are typically fired from an arms-extended position,
eye relief is less of a safety issue than with riflescopes. However, it’s
still important to get the eye relief right for you.
1. Holding the handgun in your normal shooting stance, position
the scope in the rings to achieve a full field-of-view.
10
2. Proceed to CoMPLETINg THE INSTALLATIoN.
The eye relief of handgun scopes is more forgiving than that of rifle-
scopes. Nevertheless, it is important that the eye relief is compatible
with your shooting style.
Download from Www.Somanuals.com. All Manuals Search And Download.
Unlike riflescopes, adjustments to the eyepiece in handgun scopes
affect the eye relief as well as the reticle focus. Turning the eye-
piece clockwise increases eye relief and turning it counterclockwise
decreases it.
Misalignment will not affect accuracy at moderate distances but
it can diminish long range accuracy.
3. When you are satisfied, tighten the ring screws evenly
and securely.
CoMPLETINg THE INSTALLATIoN
FoCUSINg THE RETICLE
11
1. Without disturbing the optimal eye relief position, rotate the
scope until the elevation adjustment dial is at the top of the
scope.
Secure the scope and firearm in a firm rest. Safely point the scope
at a light colored background object. With the scope approximately
four inches from your eye the reticle should appear sharp and crisp;
if it does not, it is necessary to adjust the focus by means of the
eye piece.
2. From a firing position, check to be sure that the vertical hair
of the reticle aligns with the vertical axis of the firearm.
Download from Www.Somanuals.com. All Manuals Search And Download.
If your Leupold scope is one of our models with an eyepiece that has
a lock ring, follow these simple steps:
3. Looking through the scope when pointed at the sky, take a
few quick glances at the reticle. The focus of the reticle should
be noticeably different from when you started. Continue this
process until the reticle appears clear and sharp.
1. grasp the eyepiece with your hand and back it away from the
lock ring. once the lock ring is free from the eyepiece, turn it
clockwise away from the eyepiece to keep it out of the way
during the adjustment.
4. When you are satisfied with the image of the reticle, turn the
lock ring so that it rests firmly against the eyepiece.
12
2. If you tend to hold things away from yourself to see them
clearly (you are farsighted) turn the eyepiece counterclockwise
a couple of turns. If you hold things close to yourself to see
them clearly (you are nearsighted) turn the eyepiece clockwise
a couple of turns.
Download from Www.Somanuals.com. All Manuals Search And Download.
If your Leupold scope is one of our models without an eyepiece lock
ring, follow these simple steps:
normally changes. You may want to check the sharpness of the
reticle on your scope every few years to ensure it is still adjusted cor-
rectly for your eye.
1. All adjustment is made with the eyepiece.
NoTE: To protect the integrity of the waterproof seal of every Leupold
Golden Ring scope, an internal mechanism prevents the eyepiece from
being removed.
2. Look through the scope with quick glances while focusing the
reticle image. If you tend to hold things away from yourself to
see them clearly (farsighted) turn the eyepiece ring counter-
clockwise until the reticle is clear and sharp. If you hold them
close to yourself to see them clearly (nearsighted) turn the eye-
piece ring clockwise until the reticle is sharp and clear.
13
The primary function of a scope is to aim the firearm. Never use the
scope as a substitute for binoculars. Never watch another person
through the scope. As always, the golden Rule applies.
If your eyesight changes, readjust the eyepiece. As we age, eyesight
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Sight-In
USINg A BoRE-SIgHTINg CoLLIMAToR
USINg THE LEUPoLD zERo PoINT
ILLUMINATED MAgNETIC BoRESIgHTER
To save time and ammunition, start out in your shop or gun room
with a bore-sighting collimator. Follow the directions included with
the collimator for specific instructions on its proper use. Remember,
when possible, it is better to make the initial windage adjustments
to the mount base before using the scope’s windage adjustment.
This tool fits any rifle, shotgun, or pistol, and helps you get “on the
paper” fast, without barrel spuds. It works with any optical sight,
and can even be used to recheck your zero, without firing a shot.
more information.
14
NoTE: Bore-sighting alone is not sufficient to sight-in a scope. You
must make final adjustments by shooting the firearm using the same
ammunition you use in the field.
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure B
Figure A
TRADITIoNAL BoRE-SIgHTINg (BoLT ACTIoNS)
Preliminary sighting-in can also be accomplished by bore-sighting at
the firing range using a target from 20 to 50 yards away.
1. Position the firearm on the bench, using sandbags to steady
the firearm.
Target as seen
through the bore.
2. Remove the bolt from the firearm.
15
3. Looking through the bore itself, move the firearm to center the
bull’s-eye of the target inside the barrel, as shown in Figure A.
4. Hold the rifle steady. With the bull’s-eye centered when viewed
through the bore, make windage and elevation adjustments to
the scope until the very center of the reticle is aligned with the
bull’s-eye of the target, as shown in Figure B.
THE FINAL STEP: THREE-SHoT gRoUPS
Whichever bore-sighting method you’ve used, the next steps are the
same on the firing range. To ensure reliable results, always fire from
a rested position when performing these steps. (If you are using an
Download from Www.Somanuals.com. All Manuals Search And Download.
adjustable objective or side focus model scope, perform any correc-
tion for parallax before continuing, as explained in “Understanding
Parallax” on pages 29-32.)
three inches right. Assuming
you’re sighting-in at 100 yards,
you should make a 2-MoA
adjustment up, and a 3-MoA
adjustment left. Your next
1. Fire a shot or two.
2. If you are several inches off center, make an appropriate
amount of adjustment to move the reticle to the center of
the target.
three-shot group should be
very close to the center of the
target. To learn about making
final adjustments, proceed to
the upcoming section on wind-
age and elevation adjustments.
16
3. Carefully fire a three-shot group.
4. Use the center of that group as a reference point for the final
adjustments to windage and elevation.
on the sample target, the center of the group is two inches low and
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Precise Windage And Elevation Adjustments
The style of elevation and windage adjustments on Leupold
riflescopes varies with specific models. Each, however, is clearly
marked in easy to read increments. If, for example, there are four
hash marks from zero to (and including) the number one on an
adjustment knob, then the value of each increment of adjustment
on that knob is 1/4-MoA. It is the same with all Leupold
adjustment dials. one-MoA moves the point of impact at 100 yards
by 1 inch. At 100 meters, it moves 29mm.
The letters found on the windage and elevation dials refer to the
direction that the point-of-impact of the bullet is moved when an
adjustment is made.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
ADjUSTINg WINDAgE AND ELEVATIoN
®
™
oN VX -7 RIFLESCoPES (SPEEDIAL )
The adjustment cover is integral to the adjustment mechanism. To
make a correction, simply rotate the adjustment cover counter-
clockwise until it “pops up,” fully revealing the adjustment indica-
tion markings, and make the appropriate correction. To secure the
adjustment cover, push down while tightening the cover.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
ADjUSTINg WINDAgE AND ELEVATIoN
oN TARgET AND TACTICAL SCoPES
Leupold Target, Competition, and most Tactical scopes have
micrometer-style windage and elevation adjustments. A click for
each adjustment division can be both heard and felt so adjustments
to the scope can be made without looking at the dials. Indicators on
the micrometer portion of the dial show the number of complete
360˚ rotations that have been made.
19
Target style adjustments for range and wind
adjustments in the field.
Download from Www.Somanuals.com. All Manuals Search And Download.
further adjustments are made in the field.
BULLET DRoP CoMPENSATIoN DIALS
To reposition the dials on Rifleman®, VX®-I, and FX™-I models, place
a coin or screwdriver in the slot in the numbered dial and rotate it so
that the zero aligns with the stamped line indicator mark on the top
of the adjustment screw that is perpendicular to the coin slot.
Special bullet drop compensation (BDC) elevation dials are featured
on selected scopes. These dials are calibrated to achieve adjustment
to specific distances rapidly by distance indicators marked directly on
the dials.
20
zERoINg THE WINDAgE AND
ELEVATIoN DIALS AFTER SIgHTINg IN
Rifleman, VX-I, and FX-I dials
adjust easily to indicate the
new zero position.
All Leupold scopes feature adjustment dials that can be repositioned
to align the marked zero of the dial with the position indicator
without changing the adjustment setting of the scope. This allows
the shooter to know the original zero of the rifle in the event that
Download from Www.Somanuals.com. All Manuals Search And Download.
VX-II and FX-II models have a pointer dial that moves with the
adjustment slot. This dial also can be moved independently to align
with the zero on the outermost dial. To reposition this dial simply
rotate it until the pointer is aligned with the zero.
VX-ll, VX-3, FX-ll and FX-3
dials have a separate pointer dial
that can be adjusted to indicate
the new zero position.
VX-3 and FX-3 models have an indicator dial that can be moved
independently to align with the zero on the adjustment dial. To
reposition this dial simply rotate it until the position indicator notch
is aligned with the zero of the adjustment dial.
VX-3, FX-3
21
VX-II, FX-II
Download from Www.Somanuals.com. All Manuals Search And Download.
To reposition the dials on VX-7 riflescopes:
1. Unscrew the adjustment cover until it “pops up,” fully reveal-
ing the adjustment indication markings and set screws.
2. Loosen the set screws that surround the top of the dial portion.
3. Move the cylinder dial by hand to align the zero with the gold
witness mark at the base of the cylinder.
22
4. Secure the set screws.
Download from Www.Somanuals.com. All Manuals Search And Download.
To reposition the dials on Target and Tactical models:
1. Loosen the set screws that surround the top of the knob until
the cylinder turns freely.
2. Move the cylinder dial by hand to align the zero with the white
perpendicular mark at the base of the cylinder.
3. Tighten the set screws until the cylinder is secure.
23
Target-style dials can be adjusted to the new zero position by loos-
ening the set screws, rotating the dial, and tightening the
set screws.
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Counting the clicks or hash marks, turn it all the way in the
other direction.
CENTERINg WINDAgE AND ELEVATIoN
ADjUSTMENTS To ACHIEVE oPTIMUM
ADjUSTMENT TRAVEL
3. Turn the dial back half the amount of clicks or hash marks
counted.
Making windage and elevation adjustments moves the entire erector
system horizontally and vertically inside the scope. If the erector
system is off to one side – as a result of having been mounted on a
non-adjustable mount – the adjustments won’t provide equal travel
in all directions. To regain full balanced travel, you must recenter the
adjustment as follows:
4. Repeat this process for the elevation adjustment.
24
1. Turn the windage adjustment to the point that it stops moving.
Download from Www.Somanuals.com. All Manuals Search And Download.
What You Should Know About Variable Power Scopes
Leupold variable power scopes allow you to select from a range of
magnifications to suit your particular rifle, cartridge, and shooting
needs.
All variable power scopes have a power selector ring in front of the
eyepiece assembly. Turn the ring to align the number indicating the
desired magnification with the indicator on the body of the scope.
25
WARNINg: Do not loosen the screw in the power selector ring.
Doing so will release the internal gas that keeps the scope fog
free. Loosening the screw will also disconnect a pin that controls
the internal operations, causing other problems that would
require factory repairs. Do not lubricate the power selector ring;
doing so is unnecessary.
Download from Www.Somanuals.com. All Manuals Search And Download.
VX-7 BALLISTICS INDICAToR RINg
Certain ballistics-compensation reticles such as the Boone and
Crockett, and Varmint Hunter’s reticle may require tuning to achieve
maximum precision with multiple loads. The VX-7 ballistics indicator
ring allows you to manually set a reference point for your current tra-
jectory. once the proper magnification setting has been determined
(see Ballistics Aiming System instruction supplement), the ballistics
indicator ring can be aligned with the witness mark on the eyepiece,
allowing fast and accurate return to this setting in the field.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
to crosshair) may certainly be estimated. It is necessary to know the
approximate physical size of your target whenever you
estimate range.
RANgE ESTIMATINg WITH VX-3 SCoPES
Selected VX-3 scopes have a built-in range estimator. This system uses
®
the Duplex portion of the reticle in combination with an additional
set of numbers on the power selector ring. (Also see the Leupold
Range Estimating Reticle Instructions for other reticle types.) In scopes
with this feature the space between the tip of the thicker post of the
Duplex reticle and the center of the reticle covers 16 inches at 200
yards (the size of a Whitetail buck from backbone to brisket).
Range
Power
27
NoTE: The Duplex reticle was designed to estimate ranges based on the
backbone to brisket dimension of a Whitetail buck. The distance of other
game with a body dimension that is known to be 16 inches (or 32 inches
if the measurement is taken from post to post instead of post
Figure C
Download from Www.Somanuals.com. All Manuals Search And Download.
on scopes with this feature, the numbers facing forward show the
scope’s magnification settings. The numbers facing the back are for
ranging and show the distances in yards, as shown in Figure C.
To estimate range, follow these steps:
1. View the target through the scope.
2. When targeting an animal with a body that is 16 inches from
backbone to brisket, adjust the power selector until that area of
the animal’s body fits between the center of the crosshair and
the top of the lower heavy post.
28
Bracket the animal from
backbone to brisket.
3. Read the number on the power selector ring to determine the
approximate distance in yards.
Download from Www.Somanuals.com. All Manuals Search And Download.
than 2/10ths of an inch.) It is also good to remember that, as long as
you are sighting straight through the middle of the scope, or close to
it, parallax will have virtually no effect on
UNDERSTANDINg PARALLAX
Parallax is the apparent movement of the target relative to the
reticle when you move your eye away from the center point of the
eyepiece. It occurs when the image of the target does not fall on the
same optical plane as the reticle. This can cause a small shift in the
point of aim.
accuracy in a hunting situation.
ABoUT FIXED PARALLAX DISTANCE SCoPES
Any fixed focus optical system can be adjusted to be parallax free at
only one distance. Most Leupold scopes are adjusted at the factory to
be parallax free at 150 yards. However, there are exceptions:
29
Maximum parallax occurs when your eye is at the very edge of the
exit pupil. (Even in this unlikely event, our 4x hunting scope focused
for 150 yards has a maximum error of only 8/10ths of an inch at
500 yards.)
1. Leupold rimfire scopes are set to be parallax free at 60 yards.
2. Leupold shotgun/muzzleloader scopes are set to be parallax free
At short distances, the parallax effect does not affect accuracy.
(Using the same 4x scope at 100 yards, the maximum error is less
at 75 yards.
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Leupold Handgun and Ultralight 2.5x scopes are set to be
parallax free at 100 yards.
THE ADVANTAgE oF ADjUSTABLE
PARALLAX SETTINg SCoPES
Target shooting and varmint hunting demand extreme accuracy.
You must have a scope with a parallax adjustment dial for precise
shooting at various ranges. The parallax adjustment can be located
either at the objective end of the scope or on the side of the
adjustment turret housing. The adjustment moves a lens within the
scope causing the target image and the reticle to fall on the same
optical plane. This ensures optimal accuracy at the distance of the
target.
30
Side Parallax Adjustment
Download from Www.Somanuals.com. All Manuals Search And Download.
To eliminate parallax in adjustable objective and long range (side
focus) scopes, follow these steps:
NoTE: Settings may vary slightly per individual preferences, air
temperature, and atmospheric conditions.
1. The reticle should be clear (focused) before adjusting the
parallax. If it is not, follow the instructions under “Focusing the
Reticle.” See page 11.
NoTE: The side parallax adjustment knob is not to be used to focus the
target image. If the reticle is first focused and the parallax then properly
set, the image should be clear.
2. With the firearm in a stable position, look through the scope,
concentrating on the center aiming point of the reticle.
31
EFR SCoPES AND THE ADjUSTABLE oBjECTIVE
Leupold EFR (Extended Focus Range) scopes can eliminate parallax
for distances as short as 10 meters. Unlike conventional adjustable
objective scopes, the focus ring on EFR models rotates more than
360°. It is important to pay special attention when adjusting
these scopes.
3. Move your head slightly up and down while turning side
parallax or adjustable objective ring until the reticle does not
move in relation to the target. Using the numbers on the
adjustable objective ring, you can get your parallax adjustments
close to the proper setting before assuming a shooting position.
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Turn the focus ring counterclockwise (when viewing though the
eyepiece) until it stops.
allow for the attachment of lens covers and a variety of Alumina®
accessories. These attachments thread directly into the objective or
eyepiece rings. Turn until finger tight – do not over tighten.
2. Turn the focus ring clockwise until the “10m” mark aligns with the
indicator mark on the bell of the scope.
3. From this point, all readings of the focus ring are in numerical
order when the ring is turned clockwise from the shooting
position.
32
4. Adjust the ring as you would a standard adjustable objective
model.
INSTALLINg A LENS ATTACHMENT
To adjust the parallax distance,
turn the focus ring.
Many Leupold scopes offer threaded objective and eyepiece rings to
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Illuminated Reticle
All Leupold Illuminated Reticle scopes may be used in either the
standard or the illuminated state. When not illuminated, the reticle
performs the same as the reticle in a standard Leupold scope.
Illuminating the reticle allows a better distinction to be made
in poorly lighted conditions between the target and the precise
position of the aiming point.
33
The control dial for the Leupold Illuminated Reticle
is located above the eyepiece.
Download from Www.Somanuals.com. All Manuals Search And Download.
To illuminate the reticle:
For prolonged storage, remove the battery.
1. grasp the illumination dial located at the top of the
If the reticle fails to illuminate or appears dim even on the highest
illumination setting, it is necessary to change the battery.
eyepiece shell.
2. Turn the dial clockwise from the oFF position to the first
WARNINg: Always check to ensure that the firearm is unloaded
number indicated on the dial.
before changing the battery in the scope.
3. View the target through the scope to determine if the reticle is
bright enough to stand out clearly against the target.
34
4. If more illumination is required, continue turning the dial
clockwise until the reticle is clearly visible against the target.
To preserve the life of the battery, always remember to turn the
illumination dial to the oFF position when the scope is not in use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Battery
All Leupold Illuminated Reticle scopes use a 3-volt lithium photo
Battery
battery. See page 36.
To change the battery:
1. Remove the battery cover by grasping its edge (located around the
top of the illumination dial) and twisting the cover counterclockwise
while holding the sides of the illumination dial to keep the entire
dial from turning.
35
2. Remove the old battery from its position in the center of the dial.
The battery for the Leupold Illuminated Reticle is located inside
the control dial and can be changed without tools.
Download from Www.Somanuals.com. All Manuals Search And Download.
This can be done in two ways:
Replacement 3-volt lithium batteries:
®
®
a. grasp the edges of the battery between the thumb and
Duracell . . . . . . . . . . DL1/3N
Varta . . . . . . . . . . . . CR1/3N
®
®
forefinger and lift it free of the dial.
Eveready . . . . . . . . . 2L76
Sanyo . . . . . . . . . . . CR1/3N
®
Kodak . . . . . . . . . . . K58L
oR
b. Turn the scope so that the illumination dial faces downward
and gently tap the eyepiece against the edge of your palm.
There may be other lithium batteries that are acceptable with your
Leupold Illuminated Reticle scope. Check with your local retailer for
other options.
36
3. Insert the new battery, positive (+) side up.
4. Replace the battery cover on the illumination dial and turn
it clockwise until it is secure while holding the sides of the
illumination dial to keep the entire dial from turning.
Download from Www.Somanuals.com. All Manuals Search And Download.
Leupold Means Minimal Maintenance
adjusting, to keep out dust and dirt. (It’s worth noting that, unlike
LENSES
competitive brands, Leupold scopes are waterproof even without the
caps in place.)
Leupold scope lenses are coated to reduce light reflections and light
scattering, thus increasing light transmission through the scope. They
should be cleaned as carefully as you would a camera lens. Begin by
using a lens brush to remove dust and then pure alcohol, high-grade
glass cleaner, or pure water on a cotton swab.
EYEPIECE ADjUSTMENT
This adjustment is permanently lubricated. There is no need to
lubricate it. The eyepiece can be rotated as far as it will go in either
direction. It will not detach from the scope as there is an internal
lock ring.
37
WINDAgE / ELEVATIoN ADjUSTMENTS
These adjustments are permanently lubricated. There is no need
to lubricate them. Keep the adjustment covers on, except when
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECToR RINg.
SEALS
Leupold scopes are sealed from within by several methods, including
ADjUSTABLE oBjECTIVE/SIDE PARALLAX DIAL
o-rings. All seals are permanent and require no maintenance.
No lubrication is required.
SCoPE EXTERIoR
TRoUBLE SHooTINg TIPS
Leupold scopes are made of rugged 6061-T6 aircraft aluminum alloy.
No maintenance of any kind is required; simply wipe off any dirt or
fingerprints that accumulate with a clean, dry cloth.
Before you ship a scope back to the factory for service or repair,
please check the following items.
38
1. Check the mount. Make sure the scope is mounted securely to
the rifle. Try, with bare hands only, to gently twist the scope in
the rings or see if anything moves when you jiggle it. If there
is any movement, retighten the mounting system according to
mounting instructions.
PoWER SELECToR RINg (oN VARIABLE PoWER SCoPES)
No lubrication is ever required on the power selector ring. Do
NoT LooSEN oR REMoVE THE HEX-HEAD SCREW IN THE PoWER
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Make sure the action of your rifle is properly bedded in the
stock, and that all receiver screws are tight and have been
tightened in the sequence recommended by the manufacturer.
A loosely fitted stock can cause changes to the point-of-impact.
3. When test firing a rifle to check the point-of-impact relative to
windage and elevation adjustments, be sure to fire from a solid
bench with sandbags supporting the forearm and buttstock.
4. Be sure to use factory-loaded ammunition of the same bullet
type, weight, and preferably, lot number. If one type of ammu-
nition does not shoot well, try another brand or bullet weight.
5. Be certain that both the barrel and chamber are clean. Heavy
factory grease or copper fouling on an older one can diminish
the accuracy of the firearm.
LEUPoLD PRoDUCT SERVICE
If your Leupold golden Ring scope fails to perform in any way, you
may return it directly to the factory (or one of our international
service centers) for service. We recommend contacting Leupold
Technical Service at 1-800-Leupold (538-7653), and following these
shipping instructions:
39
1. Remove the rings and any other accessories from the scope.
2. Record the serial number of the scope and keep it for
your records.
3. Include a note with your name, address, telephone number,
E-mail, and a description of the problem.
4. Pack the scope in its original box (if you have it), as this is the
Download from Www.Somanuals.com. All Manuals Search And Download.
safest shipping container. Wrap the package securely using
filament strapping tape on the outside.
Outside the United States:
Canada: Korth Group Ltd., 103 Stockton Point, Box 490
5. Ship the scope by parcel or mail service (insured, if possible) to
one of the following addresses:
Okotoks, AB T1S 1A7, Canada
germany: Harold Ros, Coburger Strasse 71,
98673 Eisfeld, Germany
In the United States:
Sweden: HDF Gyttorp Jakt AB, Svarvaregatan 5,
40
S-302 50 Halmstad, Sweden
Parcel Service:
By Mail:
Leupold Product Service
14400 NW Greenbrier Parkway
Beaverton, OR 97006-5790
USA
Leupold Product Service
P.O. Box 688
our Product Service telephone numbers are (503) 526-1400 or
(800) LEUPoLD (538-7653), fax is (503) 352-7621. They can also be
Beaverton, OR 97075-0688
USA
Download from Www.Somanuals.com. All Manuals Search And Download.
The Best Consumer Protection in the Business
All Leupold golden Ring products are made with your absolute
is afforded a lifetime guarantee. For legal reasons, this guarantee
satisfaction in mind. That’s why we offer the Leupold Full Lifetime
must be restricted to 30 years in germany and other countries where
an unlimited lifetime guarantee is prohibited. Each owner, even
those that acquired a golden Ring product used, can make use of
guarantee:
If any Leupold golden Ring product is found to have defects in
materials or workmanship, we will, at our option, repair or replace
it. Free. Even if you are not the original owner. No warranty card
required. No time limit applies.
41
this 30 year guarantee.
THE LEUPoLD ELECTRoNIC WARRANTY
Certain Leupold scopes are equiped with electronic components,
which operate independently of the mechanical and optical systems
of the scopes. Theseelectronic components are warranted for a
full two years against all material and manufacturing defects. This
The Leupold guarantee in germany and other countries where
legally prohibited: Leupold is convinced of the high-quality and
reliability of its golden Ring products. This is why each U.S. customer
Download from Www.Somanuals.com. All Manuals Search And Download.
warranty is effective from the date of purchase of the scope. If, within
the course of normal usage, the electronic components of any Leupold
scope malfunction within this period, we will, at our option, repair or
replace it.
LEUPoLD MAKES MoRE THAN SCoPES
42
See our complete line of rangefinders, mounting systems, binoculars,
spotting scopes, and accessories at your nearest Leupold dealer.
For a free Leupold catalog, write to:
Leupold & Stevens, Inc., P.o. Box 688, Beaverton, oR 97075,
call (503) 526-1400 or (800) LEUPoLD (538-7653),
Download from Www.Somanuals.com. All Manuals Search And Download.
Leupold & Stevens, Inc. reserves all other rights. ALUMINA; AMERICA’S
OPTICS AUTHORITY; BOONE AND CROCKETT; CQ/T; DESIGN ONLY
(GOLDEN RING); DUPLEX; GOLDEN RING; INDEX MATCHED LENS
SYSTEM; KATMAI; LEUPOLD; LPS; LR/T; MADE RIGHT, MADE HERE;
MARK 2; MARK 4; MESA; MR/T; MULTICOAT 4; PERFORMANCE STARTS
ON THE INSIDE; QUICK SET ROTARY MENU; RAINCOTE; RIFLEMAN;
SCOPESMITH; SEQUOIA; SPR; SWITCH/POWER; TBR; TMR; TRUE
BALLISTIC RANGE; TURKEY PLEX; VARI-X; VX; YOSEMITE; and ZERO
POINT are registered trademarks of Leupold & Stevens, Inc., Beaverton,
Oregon. ADVANCED IMAGE OPTIMIZATION; BALLISTICS AIMING
SYSTEM; BLACK RING; BUILT FOR GENERATIONS; BZ; CASCADES;
CLEAR FIELD; DARK EARTH; DIAMONDCOAT; DIAMONDCOAT 2;
DIGITAL INSTRUMENT PANEL; DUAL DOVETAIL; ER/T; FX; GREEN RING;
INFINITE POWER BAND; INTESIFIER; L-COAT; LIGHT OPTIMIZATION
PROFILE; LX; ; MATCH 13 RETICLE SYSTEM; OG; OLYMPIC; ONE-TIME
FOCUS; OP; OPTIMIZER; PINNACLES; PRW; QR; QRW; QUICK RELEASE;
RAIN SHED; RX; SPEEDIAL; STD; TOTAL LIGHT THROUGHPUT; VX-L;
XTENDED TWILIGHT LENS SYSTEM; X-TREME; and YL are trademarks of
Leupold & Stevens, Inc., Beaverton, Oregon. Note: We reserve the right
to make design and/or material modifications without prior notice.
Leupold products are manufactured under one or more of the following
patents: U.S. Patents: 5,035,487; 5,231,535; 5,671,088; 5,866,048;
6,005,711; 6,279,259; 6,295,754; 6,351,907; 6,359,418; 6,469,829;
6,519,890, 6,691,447; 6,816,305; 7,088,506; D347,441; D403,393;
D413,153; D414,835; D415,546; D416,972; D420,718; D420,807;
D421,286; D427,658; D490,097; D506,520; D512,449; D517,153;
D519,537. Foreign Patents: BX30938-00; CA-Rd./Enr.1999-88472;
DE49903766.9; DE69216763T; DE-M9304093.8; DE202005017276U1;
EP0540368; GB0540368; IL31338; IT75604; JP1074623; SE55201;
TW148948; EM59613; EM393467.
The Leupold package is made in part
from recycled materials and is 100%
recyclable. This includes the black
polypropylene supports, which are made
of an accepted recyclable material. Many
Leupold owners keep their scope boxes. If
you have no use for yours, we encourage
you to dispose of it responsibly. The
special cloth surrounding your new scope
was designed to be reusable; consider
making it part of your regular gun care
kit.
43
This publication may not be reprinted or otherwise reproduced without
the expressed written consent of Leupold & Stevens, Inc. Copyright ©
2008 Leupold & Stevens, Inc. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Passez à TERMINER L’INSTALLATION.
1. Sans déplacer la position de l’œil optimale, tournez la lunette de visée
jusqu’à ce que le cadran d’ajustement d’élévation soit au sommet de la
lunette de visée.
Veuillez lire ce manuel en entier aVant de monter
Votre lunette de Visée.
– mise en garde –
Vérifiez toujours et assurez-vous que l’arme à feu soit déchargée
avant d’entreprendre tout travail sur l’arme.
REMARQUE : pour confirmer que votre lunette de visée est
montée à la meilleure position possible, essayez plusieurs positions
: à genoux, assis, accroupi et en visant en amont et en aval.
Rappelez-vous que viser en amont réduit typiquement la position
de l’œil. Il est recommandé de porter des vêtements de chasse/tir
car cela pourrait modifier légèrement la position de l’œil.
– avertissement –
Si une lunette de visée est montée très loin vers l’arrière, l’oculaire
de visée pourrait blesser le front du tireur. Tirer dans un angle
en amont augmente aussi ce danger car cela réduit la distance
entre le front et l’arrière de la lunette de visée. Pour cette raison,
les lunettes de visée Leupold sont aussi fabriquées pour offrir
une bonne position de l’œil. Donc, en montant votre lunette de
visée, nous recommandons de la placer aussi loin que possible
vers l’avant dans les montures pour tirer profit de cette généreuse
position de l’œil.
2. D’une position de tir, vérifiez pour vous assurer que le fil vertical
du réticule s’aligne avec l’axe vertical de l’arme à feu. Un mauvais
alignement n’affectera pas l’exactitude à des distances modérées, mais
pourrait réduire l’exactitude de grande portée.
établissement de la position de l’oeil pour les
carabines et fusils
À cause des considérations de sécurité associées à la bonne position de l’œil,
Leupold recommande fortement de monter votre lunette de visée aussi loin
que possible vers l’avant. Suivez aussi les étapes suivantes :
3. Lorsque vous avez ce que vous recherchez, resserrez bien les vis de
l’anneau uniformément.
44
mise au point du réticule
1. Avec la lunette de visée aussi loin que possible vers l’avant des
montures, tenez la carabine dans votre position normale de tir. (Les
lunettes de visée à grossissement variable devraient être placées à la
valeur de grossissement la plus élevée pour cette démarche.)
Installez bien la lunette de visée et l’arme à feu dans un appui ferme. Pointez
la lunette de visée vers un objet pâle à l’arrière-plan. Avec la lunette de visée
à environ quatre pouces de votre œil, le réticule devrait être précis et net; si tel
n’est pas le cas, il faut ajuster la mise au point avec l’oculaire.
2. Déplacez lentement la lunette de visée vers l’arrière jusqu’à ce que
vous voyiez un champ de visée complet.
Si votre lunette de visée Leupold est l’un de nos modèles à oculaire à anneau
de verrouillage, suivez ces étapes simples :
terminer l’installation
3. Placez votre lunette de visée ici pour une position de l’œil maximale.
1. Agrippez l’oculaire de la main et reculez de l’anneau de verrouillage.
Download from Www.Somanuals.com. All Manuals Search And Download.
Lorsque l’anneau est dégagé de l’oculaire, tournez-le dans le
sens horaire en l’éloignant de l’oculaire pour qu’il n’entrave pas
l’ajustement.
d’ajustement et corrigez. Pour replacer le couvercle d’ajustement, enfoncez
tout en resserrant le couvercle.
de la lunette de visée.
établir des ajustements précis de dériVe et d’éléVation
Le style d’ajustements d’élévation et de dérive sur les lunettes de visée pour
carabine varie selon les modèles. Chacun est clairement marqué en incréments
faciles à lire. Si, par exemple, il y a quatre symboles de numéro de zéro à (y
compris) le chiffre un sur un bouton d’ajustement, alors la valeur de chaque
incrément d’ajustement sur ce bouton est de 1/4-MOA. C’est la même chose
pour les cadrans d’ajustement Leupold. Un MOA déplace le point d’impact à
100 verges par pouce. À 100 mètres, il se déplace de 29 mm.
2. Si vous avez l’habitude de tenir les choses loin de vous-même pour voir
clairement (vous êtes hypermétrope), tournez l’oculaire dans le sens
antihoraire de quelques tours. Si vous tenez les choses près de vous-
même pour les voir clairement (vous êtes myope), tournez l’oculaire
dans le sens horaire de quelques tours.
ajustements de dériVe et d’éléVation des lunettes de
Visée de cible et tactiques
Les lunettes de visée de cible, de compétition et la plupart des lunettes de
visée tactiques Leupold offrent des ajustements de dérive et d’élévation
de style micromètre. Vous pouvez entendre et sentir un clic pour chaque
division d’ajustement ce qui vous permet d’ajuster sans regarder les cadrans.
Les indicateurs de la partie micromètre du cadran présentent le nombre de
rotations complètes de 360˚ terminées.
3. Regardez par la lunette de visée pointée vers le ciel et jetez un coup
d’œil au réticule. La mise au point du réticule devrait être vraiment
différente du point de départ. Continuez cette procédure jusqu’à ce que
le réticule semble
45
Les lettres qui se trouvent sur les cadrans d’élévation et de dérive portent sur
la direction de déplacement du point d’impact de la balle lors d’un ajustement.
remise à zéro des cadrans de dériVe et d’éléVation
clair et précis.
ajustements de dériVe et d’éléVation des lunettes de
Visée
après le zérotage
4. Lorsque vous êtes satisfait de l’image du réticule, tournez l anneau de
verrouillage pour qu’il repose fermement contre l’oculaire.
Toutes les lunettes de visée Leupold comprennent des cadrans d’ajustement
pouvant être repositionnés pour aligner le zéro du cadran avec l’indicateur
de position sans modifier le réglage d’ajustement de la lunette de visée. Ceci
permet au tireur de connaître le zéro original de la carabine s’il doit effectuer
d’autres ajustements sur le terrain. Pour repositionner les cadrans des modèles
pour carabine VX®-7 (speedial™)
REMARQUE : pour protéger l’intégrité du joint étanche de toute
lunette de visée Leupold Golden
Ringscope, un mécanisme interne empêche l’oculaire de se séparer
Le couvercle d’ajustement est une partie intégrale du mécanisme d’ajustement.
Pour toute correction, tournez simplement le couvercle d’ajustement dans
le sens antihoraire jusqu’à ce qu’il “ressorte”, révélant ainsi les marques
Download from Www.Somanuals.com. All Manuals Search And Download.
Rifleman™, VX™-I, et FX™-I, placez une pièce de monnaie ou un tournevis
dans la fente du cadran numéroté et tournez-le pour que le zéro s’aligne avec
la marque de l’indicateur à ligne étampée sur le dessus de la vis d’ajustement
perpendiculaire à la fente de monnaie.
4. Installez les vis de réglage.
2. Comptez les clics ou les marques de numéro et tournez jusqu’au bout
dans l’autre direction.
Pour repositionner les cadrans des modèles Target et Tatical :
3. Ramenez le cadran à la moitié des clics ou marques de numéro
comptés précédemment.
1. Desserrez les vis de réglage qui entourent le dessus du bouton jusqu’à ce
que le barillet tourne librement.
Les modèles VX-II et FX-II ont un cadran à flèche qui se déplace avec la
fente d’ajustement. Ce cadran peut aussi se déplacer indépendamment pour
s’aligner avec le zéro du cadran extérieur. Pour repositionner ce cadran,
tournez-le tout simplement jusqu’à ce que la flèche s’aligne avec le zéro.
Les modèles VX-3 et FX-3 ont un cadran indicateur qui peut se déplacer
indépendamment pour s’aligner avec le zéro du cadran d’ajustement. Pour
repositionner ce cadran, tournez-le tout simplement jusqu’à ce que l’encoche
d’indication de position s’aligne avec le zéro du cadran d’ajustement.
4. Répétez cette démarche pour l’ajustement d’élévation.
2. Déplacez le cadran du barillet à la main pour aligner le zéro avec la marque
blanche perpendiculaire à la base du barillet.
utiliser le réticule éclairé
Toutes les lunettes de visée à réticule éclairé Leupold peuvent servir en mode
courant ou éclairé. Lorsque l’appareil n’est pas éclairé, le réticule joue le même
rôle qu’un réticule de lunette de visée standard Leupold. Éclairer le réticule
permet de mieux distinguer dans des conditions de mauvais éclairage entre la
cible et la position précise du point ciblé.
3. Resserrez les vis de réglage jusqu’à ce que le barillet soit fixé solidement.
46
centrer les ajustements de dériVe et d’éléVation pour
obtenir un déplacement optimal
Les ajustements de dérive et d’élévation déplacent tout le système érecteur
horizontalement et verticalement à l’intérieur de la lunette de visée. Si le
système érecteur est déplacé d’un côté, suite à un montage sur une monture
non réglable, les ajustements ne permettront pas de déplacement égal dans
toutes les directions. Pour retrouver un déplacement complet équilibré, vous
devez recentrer l’ajustement comme suit :
Pour repositionner les cadrans des lunettes de visée de carabine VX-7®
:
Pour éclairer le réticule :
1. Desserrez le couvercle d’ajustement jusqu’à ce qu’il “ressorte”, révélant
bien ainsi les marques d’ajustement et les vis de réglage.
1. Agrippez le cadran d’éclairage sur le dessus du corps de l’oculaire.
2. Tournez le cadran dans le sens horaire de la position « OFF » au premier
chiffre sur le cadran.
2. Desserrez les vis de réglage qui entourent le dessus du cadran.
3. Déplacez le cadran du barillet à la main pour aligner le zéro avec le repère
dorée à la base du barillet.
3. Regardez la cible par la lunette de visée pour déterminer si le réticule est
assez clair pour ressortir clairement par rapport à la cible.
1. Tournez l’ajustement de dérive jusqu’à ce qu’il cesse d’avancer.
Download from Www.Somanuals.com. All Manuals Search And Download.
4. S’il faut plus d’éclairage, continuez à tourner le cadran dans le sens horaire
jusqu’à ce que le réticule soit bien visible contre la cible.
1. Retirez les anneaux et tous les autres accessoires de la lunette de visée.
à l’extérieur des états-unis :
Canada : Korth Group Ltd., 103 Stockton Point, Box 490
Okotoks, AB T1S 1A7, Canada
2. Enregistrez le numéro de série de la lunette de visée et conservez-le
pour vos dossiers.
Pour conserver la pile, rappelez-vous toujours d’éteindre le cadran d’éclairage
en le plaçant à la position « OFF » si vous n’utilisez pas la lunette de visée.
Pour un rangement à long terme, retirez la pile.
3. Ajoutez une note avec votre nom, votre adresse, votre numéro de
téléphone, votre courriel et une description du problème.
Allemagne : Harold Ros, Coburger Strasse 71, 98673 Eisfeld, Allemagne
Suède : HDF Gyttorp Jakt AB, Svarvaregatan 5, S-302 50 Halmstad, Suède
4. Emballez la lunette de visée dans sa boîte originale (si vous l’avez) car
ceci est le contenant d’expédition le plus sûr. Emballez bien le paquet à
l’aide d’un ruban feuillard à filament à l’extérieur.
Si le réticule ne s’allume pas ou semble faible même en choisissant le réglage
le plus élevé, il faut changer la pile.
Le numéro de téléphone de notre service technique est le
(503) 526-1400, ou (800) LEUPOLD (538-7653),
le fax est le (503) 352-7621.
– avertissement –
Vérifiez toujours pour vous assurer que l’arme à feu soit déchargée
avant de changer la pile de la lunette de visée.
5. Expédiez la lunette de visée par messagerie ou par service postal
(assuré, si possible) à l’une des adresses suivantes :
47
serVice des produits leupold
aux états-unis :
Si votre lunette de visée Leupold Golden Ring ne fonctionne pas
correctement, vous pouvez la retourner directement à l’usine (ou à l’un de
nos centres internationaux) pour le service. Il n’est pas nécessaire que votre
concessionnaire expédie la lunette de visée à Leupold, mais il peut vous être
utile pour déterminer s’il faut un service en usine. Veuillez suivre ces directives
d’expédition :
Service de messagerie :
Leupold Product Service 14400 NW Greenbrier Parkway
Beaverton, OR 97075-0688 USA
Par la poste :Leupold Product Service P.O. Box 688
Beaverton, OR 97006-5790 USA
Download from Www.Somanuals.com. All Manuals Search And Download.
utilizar en estado estándar o en estado iluminado. Al no estar iluminada, la
retícula funciona de la misma manera que la retícula en una mira telescópica
Leupold estándar. En condiciones de iluminación deficiente la iluminación de
la retícula permite diferenciar mejor entre el objetivo y la posición exacta del
punto de mira.
Si la retícula no se ilumina o aparece opaca aun al seleccionar el máximo valor
de iluminación, será necesario cambiar la pila.
centrado de ajustes de corrección por efecto del
Viento y de la eleVación
para lograr un desplazamiento de ajuste óptimo
– advertencia –
Al hacer ajustes de corrección por efecto del viento y de la elevación se
desplaza la totalidad del sistema erector horizontal y verticalmente en la mira
telescópica. Si este sistema está desviado hacia un lado – como resultado de
haberlo instalado sobre una base de montaje no ajustable – los ajustes no
proporcionarán un desplazamiento equivalente en todas las direcciones. Para
recuperar el desplazamiento completo y equilibrado, será necesario volver a
centrar el ajuste de la manera siguiente:
Siempre cerciórese de que el arma de fuego esté descargada antes
de cambiar la pila de la mira telescópica.
Para iluminar la retícula:
1. Sujete el cuadrante de iluminación ubicado en la parte superior del cuerpo
del ocular.
le sugerimos leer la totalidad de este manual antes
de instalar la mira telescópica.
2. Gire a la derecha el cuadrante desde la posición de apagado (OFF) hasta el
primer número indicado en el mismo.
48
– precaución –
1. Gire el ajuste de corrección por efecto del viento hasta que éste tope.
Siempre verifique y cerciórese de que el arma de fuego esté descar-
gada antes de realizar trabajo alguno en dicha arma.
3. Observe el objetivo a través de la mira telescópica para determinar si la
retícula es lo suficientemente brillante como para destacarse con claridad con
respecto al objetivo.
2. Contando los “clic” o las marcas de referencia, gírelo completamente en
la otra dirección.
cómo establecer la distancia de la mira telescópica
para eVitar la fatiga
3. Gire el cuadrante retrocediendo la mitad de la cantidad de “clic” o marcas
de referencia contadas.
4. Si se requiere más iluminación, continúe girando a la derecha el cuadrante
hasta que la retícula quede claramente visible con respecto al objetivo.
ocular durante el uso de rifles y escopetas
4. Repita este proceso para el ajuste de elevación.
Debido las consideraciones de seguridad asociadas con las técnicas utilizadas
para establecer la separación entre ojo y mira para evitar la fatiga ocular,
Leupold recomienda enfáticamente la instalación de la mira telescópica lo más
Para conservar la vida útil de la pila, no se olvide de apagar (OFF) el cuadrante
iluminado cuando la mira telescópica no esté en uso. Para el almacenamiento
prolongado, saque la pila.
cómo usar la retícula iluminada
Todas las miras telescópicas de Leupold con retículas iluminadas se pueden
Download from Www.Somanuals.com. All Manuals Search And Download.
adelante posible en el arma. Además de lo anterior, siga estos pasos:
3. Cuando la alineación sea de su satisfacción, apriete los tornillos de
manera uniforme y segura.
– advertencia –
Si una mira telescópica se coloca demasiado atrás, el visor puede
lesionar la ceja del tirador. Al disparar en ángulo ascendente tam-
bién se aumenta este riesgo porque se reduce la distancia entre la
ceja y la parte posterior de la mira telescópica. Por este motivo, las
miras telescópicas Leupold están diseñadas para evitar al máximo
la fatiga ocular.
1. Con la mira telescópica en la posición más avanzada posible sobre la
base de montaje, sujete el rifle en la posición normal de tiro. (Para este
proceso se recomienda ajustar las miras de amplificación variable en la
máxima posición de aumento).
cómo enfocar la retícula
Fije la mira telescópica y el arma de fuego en un apoyo firme. Apunte de
manera segura la mira telescópica a un objeto con fondo de color claro. Con la
mira a aproximadamente a cuatro pulgadas de su ojo, la retícula debe apare-
cer nítida y bien definida; de lo contrario, será necesario ajustar el enfoque
por medio del ocular.
2. Desplace lentamente la mira telescópica hacia atrás justo hasta obtener
un campo visual completo.
Por lo tanto, al instalar su mira telescópica, le recomendamos colo-
carla en la posición más adelantada posible sobre
la base de montaje a fin de aprovechar al máximo esta ventaja
práctica para la reducción de la fatiga ocular.
3. Coloque la mira telescópica aquí para reducir al mínimo la fatiga ocular.
4. Continúe para TERMINAR LA INSTALACIÓN.
Si su mira Leupold es uno de nuestros modelos con un ocular que viene con
un anillo de sujeción, siga estos pasos sencillos:
49
NOTA: Para confirmar que su mira telescópica esté instalada en
la mejor posición posible, pruebe varias posiciones:
de rodillas, sentado, tendido y apuntando con ángulo ascendente
o descendente. No se olvide que al apuntar con
un ángulo ascendente normalmente se reduce la fatiga ocular. Se
recomienda el uso de ropa especial para cacería/
1. Sujete el ocular con la mano y retrocédalo para desprenderlo del anillo
de sujeción. Después que el anillo de sujeción esté libre del ocular,
gírelo a la derecha para alejarlo del ocular y apartarlo durante el ajuste.
para terminar la instalación
1. Sin perturbar la posición óptima para evitar la fatiga visual, gire la mira
telescópica hasta que el cuadrante de ajuste de elevación
se encuentre en la parte superior de la mira telescópica.
2. Si usted tiende a alejar los objetos para verlos con mayor claridad
(hipermetropía) gire a la izquierda el ocular un par de vueltas.
Si usted tiende a acercar los objetos para verlos con mayor claridad
(miopía) gire a la derecha el ocular un par de vueltas.
2. Desde una posición de tiro, verifique que la línea vertical de la retícula
esté alineada con el eje vertical del arma de fuego.
La desalineación no afectará la exactitud a distancias moderadas pero
puede reducir la precisión de largo alcance.
tiro ya que esto puede modificar levemente las consideraciones de
reducción de fatiga ocular.
3. Al ver a través de la mira telescópica cuando ésta apunta hacia las nubes,
Download from Www.Somanuals.com. All Manuals Search And Download.
dé unos vistazos a la retícula. El enfoque de la retícula debe ser con-
siderablemente diferente al que tenía cuando comenzó. Continúe este
proceso hasta que la retícula aparezca clara y nítida.
bien 29 mm a 100 metros.
de miras telescópicas tácticas tienen ajustes de precisión estilo micrométrico
por efecto del viento y de la elevación.
Las letras que se encuentran en los cuadrantes de corrección por efecto del
viento y de elevación se refieren a la dirección a la que se desplaza el punto
de impacto del proyectil cuando se realiza un ajuste.
Se puede escuchar y sentir un clic por cada marca de ajuste lo cual permite
realizar los ajustes a la mira telescópica sin necesidad de ver los cuadrantes.
Los indicadores en la porción del micrómetro del cuadrante muestran el número
completo de giros de 360˚ que se hayan realizado.
4. Cuando la imagen de la retícula sea satisfactoria, gire el anillo de
sujeción de manera que éste se apoye firmemente contra el ocular.
ajustes de precisión por efecto del Viento y de la
eleVación en miras
NOTA: A fin de proteger la integridad del sello hermético de
cada mira telescópica Leupold Golden Ring,
un mecanismo interno impide el desmontaje del ocular.
telescópicas VX®-7 riflescopes (speedial™
)
ajuste a cero de los cuadrantes de corrección por
efecto del Viento y de eleVación
La cubierta de ajuste está integrada al mecanismo de ajuste. Si desea efectuar
una corrección, sencillamente gire la cubierta de ajuste hacia la izquierda
hasta que ésta “salte”, y revele completamente las marcas de indicación de
ajuste, y entonces realice la corrección apropiada. Para fijar la cubierta de
ajuste, haga presión hacia abajo a la vez que aprieta la cubierta.
después de apuntar con la mira
cómo realizar ajustes de precisión por efecto del
Viento y de la eleVación
El estilo de los ajustes de elevación y corrección por efectos del viento (deriva)
en las miras telescópicas Leupold varía con los modelos específicos. Sin
embargo, cada una viene claramente marcada con incrementos de fácil lectura.
Si por ejemplo, hay cuatro marcas de
referencia desde cero hasta el número uno en una perilla de ajuste (ambos
valores inclusive), entonces el valor de cada incremento de ajuste en dicha per-
illa es de 1/4 de MOA. Esta convención es la misma en todos los cuadrantes
de ajuste Leupold. Una unidad MOA
50
Todas las miras telescópicas Leupold incluyen cuadrantes de ajuste que se
pueden volver a colocar para alinear la marca de cero del cuadrante con el
indicador de posición sin cambiar el valor de ajuste de la mira. Lo anterior
permite al tirador conocer el cero original en el rifle en caso de que sea
necesario realizar ajustes adicionales en el campo. Para volver a colocar los
cuadrantes en los modelos Rifleman®, VX®-I, y FX™-I, coloque una moneda o
un destornillador en la ranura del cuadrante numerado y gire dicho cuadrante
de manera que el cero quede alineado con la marca indicadora de línea
estampada en la parte superior del tornillo de ajuste que es perpendicular a la
ranura para la moneda.
ajustes de precisión por efecto del Viento y de la
eleVación en miras telescópicas
de tiro al blanco y tácticas
Las miras telescópicas Leupold de tiro al blanco, de competición y la mayoría
(o minuto de ángulo) mueve 1 pulgada el punto de impacto a 100 yardas. O
Download from Www.Somanuals.com. All Manuals Search And Download.
Los modelos VX-II y FX-II tienen un cuadrante apuntador que se mueve con la
ranura de ajuste. El cuadrante también se puede mover independientemente
para alinearse con el cero en el cuadrante más externo. Para volver a colocar
este cuadrante sencillamente gírelo hasta que el apuntador quede alineado
con el cero. Los modelos VX-3 y FX-3 tienen un cuadrante indicador que se
puede mover independientemente para alinearse con el cero en el cuadrante
de ajuste. Para volver a colocar este cuadrante gírelo simplemente hasta que
la muesca indicadora de posición quede alineada con el cero del cuadrante
de ajuste.
1. Afloje los tornillos prisioneros alrededor de la parte superior de la perilla
hasta que el cilindro gire libremente.
la otra dirección.
3. Gire el cuadrante retrocediendo la mitad de la cantidad de “clic” o marcas
de referencia contadas.
2. Mueva a mano el cuadrante del cilindro para alinear el cero con la marca
blanca perpendicular en la base del cilindro.
4. Repita este proceso para el ajuste de elevación.
3. Apriete los tornillos prisioneros hasta que el cilindro quede seguro.
cómo usar la retícula iluminada
Todas las miras telescópicas de Leupold con retículas iluminadas se pueden
utilizar en estado estándar o en estado iluminado. Al no estar iluminada, la
retícula funciona de la misma manera que la retícula en una mira telescópica
Leupold estándar. En condiciones de iluminación deficiente la iluminación de
la retícula permite diferenciar mejor entre el objetivo y la posición exacta del
punto de mira.
centrado de ajustes de corrección por efecto del
Viento y de la eleVación
para lograr un desplazamiento de ajuste óptimo
Al hacer ajustes de corrección por efecto del viento y de la elevación se
desplaza la totalidad del sistema erector horizontal y verticalmente en la mira
telescópica. Si este sistema está desviado hacia un lado – como resultado de
haberlo instalado sobre una base de montaje no ajustable – los ajustes no
proporcionarán un desplazamiento equivalente en todas las direcciones. Para
recuperar el desplazamiento completo y equilibrado, será necesario volver a
centrar el ajuste de la manera siguiente:
Para volver a colocar los cuadrantes en los modelos VX-7:
51
1. Desenrosque la cubierta de ajuste hasta que ésta “salte”, y revele completa-
mente las marcas de indicación de ajuste y los tornillos prisioneros.
2. Afloje los tornillos prisioneros que rodean la parte superior de la porción
del cuadrante.
Para iluminar la retícula:
1. Sujete el cuadrante de iluminación ubicado en la parte superior del cuerpo
del ocular.
3. Mueva a mano el cuadrante del cilindro para alinear el cero con la marca
blanca perpendicular en la base del cilindro.
2. Gire a la derecha el cuadrante desde la posición de apagado (OFF) hasta el
primer número indicado en el mismo.
4. Apriete los tornillos prisioneros.
1. Gire el ajuste de corrección por efecto del viento hasta que éste tope.
2. Contando los “clic” o las marcas de referencia, gírelo completamente en
Para volver a colocar los cuadrantes en los modelos Target (de tiro al blanco)
y Tactical (tácticos):
3. Observe el objetivo a través de la mira telescópica para determinar si la
retícula es lo suficientemente brillante como para destacarse con claridad con
Download from Www.Somanuals.com. All Manuals Search And Download.
respecto al objetivo.
muy útiles para determinar si es necesario repararla en la fábrica. Le sugerimos
atender las siguientes instrucciones de envío:
En los Estados Unidos:
4. Si se requiere más iluminación, continúe girando a la derecha el cuadrante
hasta que la retícula quede claramente visible con respecto al objetivo.
Servicio de entrega de paquetes:
Leupold Product Service 14400 NW Greenbrier Parkway
Beaverton, OR 97006-5790 USA
1. Retire los anillos y otros accesorios de la mira telescópica.
2. Registre el número de serie de la mira telescópica y consérvelo para
referencia futura.
Para conservar la vida útil de la pila, no se olvide de apagar (OFF) el cuadrante
iluminado cuando la mira telescópica no esté en uso. Para el almacenamiento
prolongado, saque la pila.
Por correo:
3. Incluya una nota con su nombre, dirección, número de teléfono, correo
electrónico y una descripción del problema.
Leupold Product Service P.O. Box 688
Beaverton, OR 97075-0688 USA
Si la retícula no se ilumina o aparece opaca aun al seleccionar el máximo valor
de iluminación, será necesario cambiar la pila.
4. Empaque la mira telescópica en la caja original (si aún la conserva), ya que
éste es el embalaje más seguro para el envío. Envuelva bien el paquete con
cinta de embalaje reforzada con filamentos en el exterior del paquete.
Fuera de los Estados Unidos:
– advertencia –
52
Canadá: Korth Group Ltd., 103 Stockton Point, Box 490
Okotoks, AB T1S 1A7, Canada
Siempre cerciórese de que el arma de fuego esté descargada antes
de cambiar la pila de la mira telescópica.
5. Envíe la mira telescópica por servicio de entrega de paquetes o de correo
(con cobertura de seguro si fuese posible) a una de las siguientes direcciones:
Alemania: Harold Ros, Coburger Strasse 71, 98673 Eisfeld, Germany
Suecia: HDF Gyttorp Jakt AB, Svarvaregatan 5,
S-302 50 Halmstad, Sweden
serVicio de productos leupold
Nuestros números telefónicos de Servicio de Productos son
(503) 526-1400 o (800) LEUPOLD (538-7653), el fax es (503) 352-7621.
También puede comunicarse con ellos a través de nuestro sitio
Si su mira telescópica Leupold Golden Ring no funciona de la manera espe-
rada, puede devolverla directamente a la fábrica (o a uno de nuestros centros
internacionales de servicio) para su reparación. No es necesario que su conc-
esionario envíe la mira telescópica a Leupold; sin embargo, ellos pueden ser
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Das Zielfernrohr hier fixieren, um den maximalen Augenabstand zu
gewährleisten.
den Genuss aller Vorteile dieses großzügigen Augenabstands zu
kommen.
bitte das gesamte HandbucH lesen, beVor das
fernroHr montiert wird.
4. Mit INSTALLATION ABSCHLIESSEN fortfahren.
installation abscHliessen
– achtung –
1. Das Zielfernrohr ohne die Position mit optimalem Augenabstand zu
stören, drehen, bis die Höheneinstellungs-Skalenscheibe sich am
Zielfernrohr oben befindet.
HINWEIS: Um zu bestätigen, dass Ihr Zielfernrohr in der opti-
malen Position montiert ist, verschiedene Positionen einneh-
men: kniend, sitzend, bäuchlings und in einem Aufwärts- als
auch Abwärtswinkel. Das Zielen in einem Aufwärtswinkel
reduziert meist den Augenabstand. Das Tragen von Jagd-/
Schießstand-spezifischer Kleidung wird empfohlen, da dies die
Augenabstanderwägungen beträchtlich verändern kann.
Vor dem Arbeiten an der Schusswaffe stets überprüfen und
gewährleisten, dass die Schusswaffe entladen ist.
2. Aus einer Feuerposition überprüfen, dass der vertikale Faden des
Absehens mit der vertikalen Achse der Schusswaffe ausgerichtet ist.
Eine falsche Ausrichtung wirkt sich bei mäßigen Entfernungen zwar
nicht auf die Zielgenauigkeit aus. Bei langen Entfernungen können
jedoch Abweichungen auftreten.
augenabstand bei geweHren und flinten
Aufgrund der mit einem korrekten Augenabstand verbundenen
Sicherheitserwägungen empfiehlt Leupold dringend, das Zielfernrohr so weit
wie möglich vom Auge entfernt zu montieren.
53
– warnung
–
Darüber hinaus gehen Sie wie folgt vor:
3. Wenn Sie zufrieden sind, die Ringschrauben gleichmäßig und sicher
festziehen.
Wird ein Zielfernrohr zu weit hinten montiert, besteht die Gefahr,
dass das Okular den Schützen an der Braue verletzt. Schießen
in einem Aufwärtswinkel erhöht diese Gefahr, weil dabei der
Abstand zwischen der Braue und dem Okular des Zielfernrohrs
verkürzt wird. Leupold Zielfernrohre sind aus diesem Grund mit
großzügigem Augenabstand konzipiert. Leupold empfiehlt, dass
Sie das Zielfernrohr so weit vorne wie möglich montieren, um in
1. Das Gewehr bei so weit vorne wie möglich montiertem Zielfernrohr
in normaler Schussposition halten. (Zielfernrohre mit variabler
Vergrößerung müssen für diesen Vorgang auf die höchste
Vergrößerungseinstellung eingestellt werden.)
scHarfstellen des abseHens
Bringen Sie die Waffe mit dem Zielfernrohr in einen festen Halt. Richten Sie
das Zielfernrohr auf ein Hintergrundobjekt heller Farbe. Bei einem Abstand
von ungefähr 10 cm zwischen Zielfernrohr und Ihrem Auge sollte das Absehen
gestochen scharf sein. Wenn dies nicht der Fall ist, muss der Fokus über das
Okular verstellt werden.
2. Das Zielfernrohr langsam nach hinten bewegen, bis Sie ein volles
Blickfeld erhalten.
Download from Www.Somanuals.com. All Manuals Search And Download.
Handelt es sich bei Ihrem Leupold-Zielfernrohr um eines der Modelle mit einem
Okular mit Feststellring, die folgenden einfachen Schritte durchführen:
ein interner Mechanismus, dass das Okular entfernt wird.
wieder zu befestigen, während des Festziehens der
Abdeckung nach unten drücken.
präzise windabdrift- und HöHeneinstellungen
1. Greifen Sie das Okular mit der Hand und ziehen Sie es nach hinten vom
Feststellring weg. Wenn der Feststellring vom Okular
getrennt ist, drehen Sie ihn im Uhrzeigersinn vom Okular weg drehen,
so dass er beim Verstellen nicht im Weg ist.
windabdrift- und HöHeneinstellungen an zielscHeiben-
Die Art der Höhen- und Windabdrifteinstellungen für Leupold-Zielfernrohre
variiert je nach Modell. Jedes Modell ist aber deutlich und in gut leserli-
chen Inkrementen markiert. Wenn z. B. vier Rautensymbole von Null bis
einschließlich der Nummer 1 an einem Einstellknopf vorliegen, ist der Wert
jedes Inkrements an diesem Knopf 1/4-MOA. Dies ist bei allen Leupold-
Skalenscheiben identisch. 1-MOA verschiebt den Treffpunkt bei 100 Metern
um 29 mm.
und scHarfscHützen-modellen
Die Zielscheiben- und Scharfschützen-Zielfernrohre von Leupold weisen
Mikrometerskalen für Windabdrift- und Höhenverstellung auf.
2. Wenn Sie eine Tendenz haben, Dinge von sich weg zu halten, um
sie scharf zu sehen (Weitsichtigkeit), drehen Sie das Okular einige
Umdrehungen gegen den Uhrzeigersinn. Wenn Sie Dinge nahe halten,
um sie scharf zu sehen (Kurzsichtigkeit), drehen Sie das Okular einige
Umdrehungen im Uhrzeigersinn.
Der bei jeder Verstellung erzeugte Klick ist sowohl hörbar als auch spürbar,
was Zielfernrohrverstellungen ermöglicht, ohne auf die Skalenscheiben zu
schauen. Anzeiger auf den Mikrometerbereichen der Skalenscheiben zeigen die
Anzahl der vollständig durchgeführten 360˚-Umdrehungen an.
Die Buchstaben an den Skalenscheiben für die Windabdrift- und
Höheneinstellung beziehen sich auf die Richtung, in die der Treffpunkt des
Geschosses bei Vornahme einer Einstellung verschoben wird.
54
3. Richten Sie das Zielfernrohr in den Himmel und prüfen Sie das Absehen
einige Male. Die Schärfe des Absehens sollte merkbar anders sein als
zu Beginn. Setzen Sie dieses Verfahren fort, bis das Absehen gestochen
scharf ist.
windabdrift- und HöHenskalenscHeiben nacH dem
einVisieren auf null zurückstellen
Alle Zielfernrohre von Leupold weisen Skalenscheiben auf, die neu positioniert
werden können, um die markierte Nulleinstellung der Skalenscheibe mit dem
Positionsanzeiger auszurichten, ohne die Einstellung des Zielfernrohrs zu verän-
dern. Dadurch kennt der Schütze
windabdrift- und HöHeneinstellung an VX®-7
zielfernroHren (speedial™
)
Die Einstellungsabdeckung ist ein integraler Bestandteil des
4. Wenn Sie mit dem Absehenbild zufrieden sind, schieben Sie den
Feststellring zurück, so dass dieser fest am Okular anliegt.
Einstellmechanismus. Um eine Korrektur vorzunehmen, einfach die
Einstellungsabdeckung gegen den Uhrzeigersinn drehen, bis sie „hochspringt“
und die Einstellungsmarkierungen zugänglich sind.
HINWEIS: Um die Integrität der wasserdichten Versieglung aller
Leupold Golden Ringscope-Fernrohre zu schützen, verhindert
in dem Falle, dass im Feld weitere Einstellungen notwendig werden, die
Originalnulleinstellung der Waffe. Um die Skalenscheiben an
Dann nehmen Sie die jeweilige Korrektur vor. Um die Einstellungsabdeckung
Download from Www.Somanuals.com. All Manuals Search And Download.
den Modellen Rifleman®, VX®-I und FX™-I neu zu positionieren, eine Münze
oder einen Schraubendreher in den Schlitz in der nummerierten Skalenscheibe
stecken und die Scheibe so drehen, dass die Null mit der eingeprägten
Linienmarke oben an der Einstellschraube ausgerichtet wird, die zum
Münzenschlitz senkrecht steht.
umgeben, lösen.
3. Die zylinderförmige Skalenscheibe von Hand verschieben, um die Null mit
der goldenen Markierung an der Zylinderbasis auszurichten.
einen ganz ausgeglichenen Weg zu erzielen, muss die Einstellung wie folgt
neu zentriert werden:
1. Windabdrifteinstellung auf den Punkt drehen, an dem sie sich nicht
weiter bewegt.
4. Stellschrauben festziehen.
2. Die Klicks oder Rautensymbole zählen und ganz in die andere
Richtung drehen.
So werden die Skalenscheiben an Zielscheiben- und Scharfschützenmodellen
neu positioniert:
Die Modelle VX-II und FX-II weisen eine Zeigerskalenscheibe auf, die mit
dem Einstellschlitz bewegt wird. Diese Skalenscheibe kann auch unabhängig
bewegt werden, um mit der Null an der äußersten Skala ausgerichtet zu
werden. Um diese Skalenscheibe neu zu positionieren, drehen Sie einfach, bis
der Zeiger mit der Null ausgerichtet ist. Die Modelle VX-3 und FX-3 weisen
eine Anzeigerskalenscheibe auf, die unabhängig bewegt werden kann, um mit
der Null an der Skalenscheibe ausgerichtet zu werden. Um diese Skalenscheibe
neu zu positionieren, einfach drehen, bis die Positionsanzeiger-Einkerbung mit
der Null an der Skalenscheibe ausgerichtet ist.
3. Die Skalenscheibe um die Hälfte der gezählten Klicks oder
Rautensymbole zurückdrehen.
1. Die Stellschrauben, welche die Oberseite des Knopfs umgeben, lösen,
bis sich der Zylinder ungehindert drehen lässt.
4. Dieses Verfahren für die Höheneinstellung wiederholen.
2. Die zylinderförmige Skalenscheibe von Hand verschieben, um die Null
mit der weißen Senkrechtmarkierung an der Zylinderbasis auszurichten.
55
Verwendung eines beleucHteten abseHens
3. Die Stellschrauben festziehen, bis der Zylinder fest sitzt.
Alle Leupold-Zielfernrohre mit beleuchtetem Absehen können entweder
im Normalzustand oder im beleuchteten Zustand verwendet werden. Ist
das Absehen nicht beleuchtet, funktioniert es genauso wie das in einem
Standardzielfernrohr von Leupold. Durch Beleuchtung des Absehens kann
bei schlechten Lichtverhältnissen besser zwischen dem Ziel und der präzisen
Position des Zielpunkts unterschieden werden.
zentrieren der windabdrift- und HöHeneinstellungen
zu erzielung eines optimalen einstellwegs
So werden die Skalenscheiben an VX-7 Zielfernrohren neu positioniert:
Durch Vornehmen der Windabdrift- und Höheneinstellungen wird das gesamte
Umkehrlinsensystem im Inneren des Zielfernrohrs horizontal und vertikal
verschoben. Ist das Umkehrlinsensystem auf einer Seite falsch ausgerichtet,
weil es an einer nicht einstellbaren Befestigung angebracht wurde, bieten die
Einstellungen keinen ausreichenden Bewegungsweg in alle Richtungen. Um
1. Einstellungsabdeckung aufschrauben, bis sie „hochspringt“ und die
Einstellungsmarkierungen und Stellschrauben zugänglich sind.
So wird das Absehen beleuchtet:
2. Die Stellschrauben, die die Oberseite des Skalenscheibenteils
1. Greifen Sie die Beleuchtungsstellschreibe, die sich oben an der
Download from Www.Somanuals.com. All Manuals Search And Download.
Okularschale befindet.
ein internationales Kundendienstzentrum) senden. Es ist nicht erforderlich, dass
der Fachhändler das Zielfernrohr an Leupold sendet, doch kann dieser beim
Bestimmen, ob eine Werksüberarbeitung erforderlich ist, sehr hilfreich sein.
Bitte beachten Sie die folgenden Versandanweisungen:
In den USA:
Paketdienst:
2. Drehen Sie die Scheibe im Uhrzeigersinn von der Position OFF (Aus) auf
die erste Skalenscheibennummer.
Leupold Product Service 14400 NW Greenbrier Parkway
Beaverton, OR 97006-5790 USA
3. Betrachten Sie das Ziel durch das Zielfernrohr, um zu bestimmen, ob das
Absehen hell genug ist, um vor dem Ziel hervorgehoben
zu werden.
1. Entfernen Sie Ringe und anderes Zubehör vom Zielfernrohr.
Per Post:
Leupold Product Service P.O. Box 688
Beaverton, OR 97075-0688 USA
2. Notieren Sie sich die Seriennummer des Zielfernrohrs und bewahren Sie
die Notiz auf.
4. Muss es heller beleuchtet werden, drehen Sie die Scheibe weiter im
Uhrzeigersinn, bis das Absehen vor dem Ziel deutlich erkennbar ist.
Außerhalb der USA:
3. Legen Sie dem Paket eine Notiz mit den folgenden Informationen bei:
Name, Adresse, Telefonnummer, E-Mail-Adresse und Beschreibung des
Problems.
Kanada: Korth Group Ltd., 103 Stockton Point, Box 490
Okotoks, AB T1S 1A7, Kanada
Um Batterie zu sparen, sollten Sie die Beleuchtungsscheibe immer auf OFF
(Aus) stellen, wenn das Zielfernrohr nicht verwendet wird. Wird es für längere
Zeit nicht verwendet, nehmen Sie die Batterie heraus.
56
4. Packen Sie das Zielfernrohr nach Möglichkeit in die Originalverpackung
oder einen anderen geeigneten, festen Versandkarton ein. Umwickeln
Sie das Paket außen gut mit Paketklebeband.
Deutschland: Harold Ros, Coburger Straße 71, 98673 Eisfeld, Deutschland
Wird das Absehen nicht beleuchtet oder ist es auch bei der höchsten
Beleuchtungseinstellung dunkel, muss die Batterie ausgewechselt werden.
Schweden: HDF Gyttorp Jakt AB, Svarvaregatan 5,
S-302 50 Halmstad, Schweden
WARNUNG: Vor dem Auswechseln der Batterie im Zielfernrohr stets
überprüfen, dass die Waffe entladen ist.
5. Senden Sie das Zielfernrohr per Paketdienst oder Post (wenn möglich
versichert) an eine der folgenden Adressen:
Die Rufnummer des technischen Kundendiensts in den USA lautet
(+1) 503 526-1400 oder (+1) 800 LEUPOLD (538-7653). Der technische
Kundendienst kann auch per Fax unter der Faxnummer (+1) 503 352-7621
bzw. über unsere Website www.leupold.com
leupold tecHniscHer kundendienst
Wenn die Leistung des Leupold Golden Ring Zielfernrohrs in irgendeiner Weise
beeinträchtigt ist, können Sie es zwecks Reparatur direkt ans Werk (oder an
in Anspruch genommen werden.
Download from Www.Somanuals.com. All Manuals Search And Download.
4. COMPLETARE IL MONTAGGIO.
leggere l’intero manuale prima di montare il
sfruttare al meglio tale caratteristica costruttiva.
cannoccHiale di mira.
NOTA: Per avere la conferma che il cannocchiale è montato
nella migliore posizione possibile, provare varie posizioni:
in ginocchio, seduti, proni, e puntare sia verso l’alto, sia
verso il basso. Ricordarsi che quando si punta verso l’alto
di norma si riduce la distanza dell’oculare dall’occhio. Per
questa operazione si consiglia di indossare indumenti da
caccia/poligono in quanto potrebbero contribuire ad alterare
leggermente le considerazioni sulla distanza dell’oculare
dall’occhio.
completamento del montaggio
– attenzione –
1. Senza alterare la distanza ottimale dell’oculare dall’occhio, ruotare
il cannocchiale finché la manopola graduata di regolazione
dell’elevazione è nella parte superiore del cannocchiale.
Prima di iniziare qualsiasi lavoro sull’arma da fuoco, controllarla e
accertarsi che sia scarica.
distanza tra oculare e occHio sui fucili
2. Dalla posizione di sparo, controllare e assicurarsi che l’incisione
verticale del reticolo sia allineata con l’asse verticale dell’arma da
fuoco. Un cattivo allineamento non influirà sulla precisione a distanze
modeste, ma può diminuire la precisione a lunghe distanze.
Date le considerazioni di sicurezza connesse a una corretta distanza
dell’oculare dall’occhio, la Leupold raccomanda caldamente
di montare il cannocchiale nella posizione più avanzata possibile. Eseguita
l’operazione, procedere come segue:
57
– avvertenza –
3. Quando si è soddisfatti, serrare bene le viti dei collari in
modo uniforme.
Se il cannocchiale è montato troppo indietro, l’oculare può ferire la
fronte del tiratore in corrispondenza delle sopracciglia. Quando si
spara verso l’alto si aumenta questo pericolo perché si diminuisce
la distanza tra il sopracciglio e la parte posteriore del cannocchiale.
Per questa ragione, i cannocchiali Leupold sono progettati in
modo da consentire una notevole distanza dell’occhio dall’oculare.
Raccomandiamo, quindi, durante il montaggio del cannocchiale, di
posizionarlo sui supporti quanto più possibile in avanti, in modo da
1. Con il cannocchiale montato nella posizione più avanzata possibile,
tenere il fucile nella propria normale posizione di sparo.
(Per questa procedura i cannocchiali a ingrandimento variabile vanno
regolati al massimo ingrandimento).
messa a fuoco del reticolo
Assicurare il cannocchiale e l’arma da fuoco in un sostegno stabile. Puntare
con sicurezza il cannocchiale verso un oggetto che abbia uno sfondo di colore
chiaro. Col cannocchiale posto a circa 10 cm dall’occhio, il reticolo dovrebbe
apparire nitido e ben definito. Se non lo è, regolare la messa a fuoco agendo
sull’oculare.
2. Far scorrere lentamente all’indietro il cannocchiale, fermandosi
appena il campo visivo è completo.
3. Fissare il cannocchiale in tal punto per avere la massima distanza
dell’oculare dall’occhio.
Download from Www.Somanuals.com. All Manuals Search And Download.
Se il proprio modello di cannocchiale Leupold è uno di quelli munito di ghiera
di bloccaggio, seguire questi semplici passi:
mira Leupold Golden Ringscope è munito di un dispositivo
interno che impedisce il distacco dell’oculare dal cannocchiale.
Il coperchio della regolazione fa parte del meccanismo di quest’ultima. Se
si desidera fare una correzione è sufficiente ruotare in senso antiorario il
coperchio fino a quando “esce” esponendo le tacche indicatrici. Quindi, fare
la correzione desiderata. Per fissare il coperchio è sufficiente spingerlo verso il
basso mentre lo si serra.
1. Afferrare con la mano l’oculare e tirarlo indietro per allontanarlo dalla
ghiera. Quando la ghiera di bloccaggio è libera dall’oculare, girarla
in senso orario, allontanandola dall’oculare, per non ostacolare la
regolazione.
messa a punto precisa della deriVazione e
dell’eleVazione
Le modalità di regolazione dell’elevazione e della derivazione per i cannocchiali
di mira Leupold per fucili cambiano a seconda del modello. Ogni regolazione
è tuttavia eseguita con incrementi di facile lettura. Se, per esempio, vi sono
quattro tacche da zero a uno (compreso) sulla manopola di regolazione,
il valore di ogni regolazione, con quella manopola, è pari a 1/4 di minuto
d’angolo. Lo stesso vale per tutte le manopole di regolazione Leupold. Un
minuto d’angolo sposta il punto di impatto di 1 pollice a 100 iarde. A 100
metri, lo sposta di 29 mm.
regolazione della deriVazione e dell’eleVazione sui
cannoccHiali tattici e da puntamento
2. Se si ha la tendenza ad allontanare le cose per vederle meglio
(presbiopia) ruotare l’oculare in senso antiorario di un paio di giri.
Se invece si tengono le cose più vicino agli occhi per vederle meglio
(miopia) ruotare di un paio di giri l’oculare in senso orario.
I cannocchiali Leupold Target e Competition (da puntamento e da gara),
nonché la maggior parte di quelli di modello Tactical (tattici),
sono dotati di dispositivi di regolazione della derivazione e dell’elevazione in
stile micrometro.
58
3. Mentre si guarda attraverso il cannocchiale puntato verso il cielo, dare
alcune rapide occhiate al reticolo. Ci dovrebbero essere delle differenze
notevoli nella messa a fuoco del reticolo rispetto a prima. Continuare
finché il reticolo appare chiaro e ben definito.
Ad ogni regolazione si sente e si avverte uno scatto. Pertanto, le regolazioni
dei cannocchiali possono essere fatte anche senza guardare
le manopole graduate. Gli indicatori montati sulla parte in stile micrometro
della manopole graduate indicano il numero di rotazioni a
360° che si sono fatte.
Le lettere sulle manopole di regolazione della derivazione e dell’elevazione
indicano la direzione in cui si sposta il punto d’impatto del proiettile quando si
esegue una regolazione.
4. Quando si è soddisfatti dell’immagine del reticolo, ruotare la ghiera di
bloccaggio in modo da farla appoggiare saldamente
contro l’oculare.
regolazione della deriVazione e dell’eleVazione nel
azzeramento delle manopole di deriVazione e di
eleVazione dopo la taratura iniziale
cannoccHiale
da puntamento VX®-7 per fucili (speedial™
)
NOTA: Per proteggere la tenuta stagna, ogni cannocchiale di
Download from Www.Somanuals.com. All Manuals Search And Download.
I cannocchiali Leupold sono dotati di manopole graduate che possono essere
riposizionate per allineare la tacca zero della manopola con l’indicatore di
posizione senza dover cambiare la regolazione del cannocchiale. In questo
modo il tiratore conosce lo zero originale del fucile, utile qualora fosse
necessario eseguire ulteriori regolazioni su campo. Per riposizionare le
manopole sui modelli Rifleman , VX -I, e FX -I: inserire una moneta o un
cacciavite nella scanalatura del quadrante numerato e ruotarlo fino ad allineare
lo zero con la linea di riferimento impressa sulla parte superiore della vite di
regolazione che è perpendicolare alla scanalatura per la moneta.
in vista le tacche di regolazione e i grani.
un supporto non regolabile — le regolazioni non produrranno la stessa corsa
in tutti i sensi. Per ristabilire una corsa completamente equilibrata, occorre
ricentrare le regolazioni:
2. Allentare i grani situati intorno alla parte superiore del quadrante.
3. Spostare a mano il cilindro graduato fino ad allineare lo zero con la
tacca dorata alla base del cilindro.
1. Ruotare la regolazione di derivazione fino all’arresto.
2. Ruotare completamente in senso opposto contando gli
scatti o le tacche.
4. Serrare i grani.
®
®
™
Riposizionamento dei quadranti dei modelli Target e Tactical:
3. Ruotare la manopola in senso opposto per la metà degli
scatti o delle tacche contati.
1. Allentare i grani situati sulla corona esterna della parte superiore della
manopola finché il cilindro ruota liberamente.
4. Ripetere la procedura per la regolazione dell’elevazione.
I modelli VX-II e FX-II sono muniti di un quadrante indicatore solidale con
la scanalatura di regolazione. Anche tale quadrante può essere spostato
indipendentemente per l’allineamento con lo zero della graduazione esterna.
Per riposizionarlo è sufficiente ruotarlo finché l’indicatore è allineato con lo
zero. I modelli VX-3 e FX-3 hanno un quadrante indicatore che può essere
spostato indipendentemente per l’allineamento con lo zero della graduazione
di regolazione. Per riposizionarlo è sufficiente ruotarlo finché la tacca
indicatrice di posizione è allineata con lo zero della graduazione di regolazione.
2. Spostare a mano il cilindro graduato fino ad allineare lo zero con la
tacca bianca perpendicolare alla base del cilindro.
59
uso del reticolo illuminato
Tutti i cannocchiali di mira Leupold con reticolo illuminato possono essere usati
con o senza illuminazione. Quando non è illuminato, il reticolo si comporta
come il reticolo dei cannocchiali standard Leupold. L’illuminazione del reticolo
consente di distinguere meglio il preciso punto di mira sul bersaglio in
condizioni di luce scarsa.
3. Serrare i grani fino al bloccaggio del cilindro.
centratura delle regolazioni di deriVazione e di
eleVazione per conseguire
la massima corsa di regolazione
Le regolazioni di derivazione e di elevazione spostano l’intero sistema
raddrizzatore in senso orizzontale e verticale all’interno del cannocchiale. Se
il sistema raddrizzatore è spostato su un lato — a causa del montaggio su
Per illuminare il reticolo:
Per riposizionare le manopole graduate sui cannocchiali VX-7:
1. Afferrare la manopola di illuminazione posta sopra l’involucro
dell’oculare.
1. Svitare il coperchio di regolazione fino a quando “esce” mettendo bene
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Girare la manopola in senso orario dalla posizione di OFF (spento) al
primo numero indicato sul quadrante.
lo si può restituire direttamente alla fabbrica (o a uno dei centri internazionali
di assistenza Leupold) per la riparazione. Non è necessario rivolgersi al
rivenditore per spedirlo alla Leupold, però lo si può contattare per determinare
se è necessaria l’assistenza della fabbrica. Istruzioni per la spedizione:
Negli Stati Uniti:
Se si usa un corriere:
3. Osservare il bersaglio attraverso il cannocchiale per stabilire se il
reticolo è abbastanza luminoso da spiccare chiaramente sul bersaglio.
Leupold Product Service 14400 NW Greenbrier Parkway
Beaverton, OR 97006-5790 USA
4. Se occorre una maggiore illuminazione, continuare a ruotare la
manopola in senso orario fin quando il reticolo è chiaramente visibile
sul bersaglio.
1. Togliere i collari ed eventuali altri accessori dal cannocchiale.
2. Annotare e conservare il numero di serie del cannocchiale.
Se si usa il servizio postale:
Leupold Product Service P.O. Box 688
Beaverton, OR 97075-0688 USA
3. Allegare un foglio su cui siano scritti il proprio nome e cognome,
indirizzo, numero di telefono, eventuale indirizzo di posta elettronica e
la descrizione del problema.
Per salvaguardare la durata della batteria, ricordarsi di ruotare sempre la
manopola di illuminazione sulla posizione OFF (spento) quando non si usa il
cannocchiale. Togliere la batteria se si prevede una prolungata inattività.
Fuori degli USA:
60
4. Imballare il cannocchiale nella scatola originale (se la si è conservata)
perché è il contenitore di spedizione più sicuro. Proteggere bene il
pacco avvolgendo la parte esterna con del nastro adesivo dotato di fili
di rinforzo.
Canada: Korth Group Ltd., 103 Stockton Point, Box 490
Okotoks, AB T1S 1A7, Canada
Se il reticolo non si illumina o appare debolmente illuminato anche al massimo
della regolazione, significa che occorre sostituire la batteria.
Germania: Harold Ros, Coburger Strasse 71, 98673 Eisfeld, Germania
Svezia: HDF Gyttorp Jakt AB, Svarvaregatan 5, S-302 50 Halmstad, Svezia
– avvertenza –
Prima di sostituire la batteria del cannocchiale, controllare e
accertarsi sempre che l’arma da fuoco sia scarica.
5. Spedire il cannocchiale usando un corriere o il servizio postale
(se possibile, assicurare la spedizione) a uno dei seguenti indirizzi:
Il numero telefonico del servizio assistenza negli USA è +1(503) 526-1400
oppure la linea verde (800) 538-7653. Si può contattare il servizio di
assistenza anche tramite fax al numero +1(503) 352-7621 o tramite internet
assistenza leupold
Se il cannocchiale di mira Leupold Golden Ring non funziona in qualsiasi modo,
Download from Www.Somanuals.com. All Manuals Search And Download.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
®
A M E R I C A ’ S O P T I C S A U T H O R I T Y
RIFLESCOPE
OWNERS MANUAL
Complete Installation & Operation Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
|