Lenoxx Electronics CD Player SL 328 User Manual

®
CD AUDIO SYSTEM  
WITH DIGITAL RADIO & BASS REFLEX  
SPEAKERS  
MODEL SL-328  
OPERATING INSTRUCTIONS  
DIGITAL RADIO WITH PRESETS  
PLAYS MUSIC COMPACT DISCS  
FULLY PROGRAMMABLE CD PLAYER WITH REPEAT PLAY  
RECEIVES AM/FM STEREO BROADCASTS  
RECORDS CASSETTES FROM CD OR RADIO  
AC POWER INDICATOR  
LARGE BACKLIT LCD DISPLAY FOR CD & RADIO  
PRESET GRAPHIC EQUALIZER SYSTEM  
BASS REFLEX SPEAKER SYSTEM  
PLEASE READ CAREFULLY BEFORE USE  
IB-SL328-SY-WM-E-120801  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADDITIONAL SAFETY INSTRUCTIONS  
1. Power Sources - The appliance should be connected to a power supply only of the type  
described in the operating instructions or as marked on the appliance.  
2. Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling.  
3. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids  
are not spilled into the enclosure through openings.  
4. Servicing - The user should not attempt to service the appliance beyond that described in  
the operating instructions. All other servicing should be referred to qualified service personnel.  
5. Do not connect FM antenna wire to any outdoor antenna.  
It is the intent of Lenoxx that this product be used in full compliance with the  
copyright laws of the United States and that prior permission be obtained from  
copyright owners whenever recording songs from the RADIO or CD’s.  
Do not apply oil or petroleum products or solvents to any part of this set.  
CAUTION  
Use of controls or adjustments or performance of procedures other than those  
specified herein may result in hazardous radiation exposure.  
This compact disc player is classified as CLASS 1 LASER PRODUCT as stated  
on the back of the set.  
IB-SL328-SY-WM-E-120801  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING THE SPEAKERS AND ANTENNAS  
Carefully unwind and stretch out the speaker wire on the back of each speaker  
box and plug the right plug into Speaker Jack marked “ R ”, and the left plug into  
Speaker Jack marked “ L ”.  
FM ANTENNA  
AM ANTENNA  
SOCKET  
AC CORD  
AM LOOP  
ANTENNA  
Unwind the FM ANTENNA (thin wire) at the back of the set and straighten it out for FM  
reception; for AM reception, please use the AM LOOP ANTENNA and plug its wire  
into the AM ANTENNA SOCKET at the back of the set, then position the AM ANTENNA  
on the top of the set for the best AM reception.  
POWERING UP  
Plug the AC POWER CORD into a 120V, 60Hz wall outlet. The AC POWER STANDBY  
INDICATOR will be on. This indicator shows you that the set & outlet are OK.  
AC POWER  
STANDBY  
INDICATOR  
To a wall outlet  
NOTE: One blade of  
plug and outlet  
is wider.  
TIP  
If the plug of the AC power cord does not match your outlet, do not force it.  
Reverse it and try again. The plug is polarized and only fits one way into the wall  
outlet.  
IB-SL328-SY-WM-E-120801  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOTE CONTROL  
You can control the player with the provided REMOTE control.  
1. MUTE  
2. TAPE  
3. BAND  
1
2
3
4
5
6
8
9
10  
11  
12  
4. CD REPEAT/RADIO PRESET  
5. RADIO TUNING DOWN/CD BACKWARD SKIP  
6. STOP  
13  
7. VOLUME DOWN  
8. POWER  
9. CD  
7
14  
10. RADIO  
11. CD PROGRAM/RADIO STORE  
12. RADIO TUNING UP/CD FORWARD SKIP  
13. CD PLAY/PAUSE  
14. VOLUME UP  
Slide the battery cover to remove. Insert two size “AAA” batteries (not included)  
correctly so that the + and - polarities match the polarity diagrams inside the  
battery compartment.  
NOTE:  
Point the REMOTE control at the REMOTE SENSOR.  
The functions of the buttons on the REMOTE control  
are the same as the corresponding controls on the  
main unit.  
About half a year of normal operation can be expected  
when using the alkaline batteries.  
When the batteries are exhausted, the REMOTE  
control will no longer operate the system. Replace  
both batteries with new ones.  
When the REMOTE control is not to be used for a long  
time (2 months or more), remove the batteries to avoid  
possible damage that may be caused by battery  
leakage.  
Avoid keeping the REMOTE control in extremely hot  
or humid locations.  
The REMOTE control’s operating distance is about  
0.2m (8 inches) to 5m (16.5 feet) away from the  
REMOTE SENSOR.  
REMOTE SENSOR  
IB-SL328-SY-WM-E-120801  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
CLOCK SETTING  
3&5  
NOTE: If the POWER switch is  
ON and you want to set  
the time, press the TAPE  
switch first, and then  
follow the listed steps to  
set the clock.  
2,4&6  
Connect the AC power cord (see page 3).  
Once the set is connected with the  
AC power, the display will show as  
right:  
1
AM  
HOUR MINUTE  
Press the PROGRAM(STORE)  
switch, the hour digits will flash for  
10 seconds.  
2
3
AM  
Press  
the  
TIME/TUNING  
switches to select the correct  
hour time. Observe the AM & PM  
indicators, advance the time 12  
hours to change AM to PM.  
AM  
Press the PROGRAM(STORE)  
switch to accept the hour time and  
switch to minute setting.  
4
5
AM  
Press  
the  
TIME/TUNING  
switches to select the correct  
minute time.  
AM  
Press the PROGRAM(STORE)  
switch again to complete clock  
setting. The numbers will not  
flash, but the colon “ : ” will flash,  
indicating that the clock is set.  
6
AM  
IB-SL328-SY-WM-E-120801  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYING A CD  
5
STANDBY  
INDICATOR  
1
6
3&4  
2
Connect the AC power cord (see page 3).  
Press the POWER switch, the AC  
POWER STANDBY INDICATOR will  
go off and the display will light up.  
1
2
3
Press the CD switch, the display  
will show six zeros “0”.  
TRACK  
Press the CD DOOR OPEN/CLOSE  
button to open the CD DOOR and  
place the disc in the CD  
compartment. The label side of  
the CD should face outward.  
Close the CD DOOR by pressing  
the CD DOOR OPEN/CLOSE  
button again. The display will  
show the total tracks on that CD  
4
TRACK  
T O T A L  
(after a few seconds).  
TRACKS  
TOTAL PLAYING  
TIME ON THE CD  
Press the CD PLAY button.  
The player will play all the  
tracks (songs) once.  
TRACK  
5
6
TRACK  
PLAYING TIME  
Press the EQ switch to  
choose different music  
effects (CLASSIC, ROCK, POP  
or flat).  
POP  
TRACK  
IB-SL328-SY-WM-E-120801  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
USE THESE BUTTONS FOR  
ADDITIONAL OPERATIONS  
CD DOOR  
OPEN/CLOSE  
TRACK  
POWER  
VOLUME +  
VOLUME -  
TIP  
When CD play  
is paused, the  
elapsed playing  
time will flash and  
no music will play.  
To  
Press or Adjust  
VOLUME + or VOLUME - button  
Adjust the volume  
Stop playback  
STOP button  
PAUSE button  
To resume play,  
press the PAUSE  
button again, the  
elapsed playing  
The elapsed playing time will  
flash during pause. Press again  
to resume play after pause.  
Pause playback  
time  
will  
stop  
flashing and music  
will play.  
Go to the next track  
FORWARDS  
BACKWARDS  
Go back to the previous  
track  
TIP  
If you bump the set  
or table it is sitting  
on, during CD play,  
the music will stop  
or skip for a few  
seconds. This is  
normal for this type  
or  
Locate a point in a  
song  
Press and hold down while  
playing until you find the point.  
Press the CD DOOR OPEN/  
CLOSE switch (press STOP first).  
Remove the CD  
Press the POWER switch, the AC  
POWER STANDBY INDICATOR  
will go on.  
Turn off the player  
IB-SL328-SY-WM-E-120801  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
REPEAT PLAY  
PLAYING CD SONGS (TRACKS) OVER AND OVER  
You can play CD tracks over and over in normal or programmed play modes (see  
page 9).  
POWER  
REPEAT  
PROGRAM  
GRAPHIC CD FUNCTION  
EQUALIZER  
SWITCH  
1. Press the POWER switch, the AC POWER STANDBY INDICATOR will go off.  
2. Press the CD switch.  
3. Select the track by pressing  
or  
, and then press  
.
4. Press the CD REPEAT button.  
To repeat  
Display shows  
Press  
a single track (song)  
Press the REPEAT button twice  
Press the REPEAT button once  
REPEAT” Flashing  
REPEAT” steady on  
all the tracks (all songs)  
programmed tracks  
REPEAT” steady  
on (“MEMORY” also  
on)  
During programmed play, press  
the REPEAT button once  
To cancel Repeat Play  
Press the REPEAT button until the “REPEAT” goes off in the display.  
IB-SL328-SY-WM-E-120801  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
SELECTING YOUR OWN MUSIC PLAYING ORDER  
(Programmed Play)  
You can make a program of up to 20 tracks  
in the order you want them to be played.  
NOTE: Programming is only done during  
stop mode.  
POWER  
PROGRAM  
During STOP mode, press the  
M
EMOR  
Y
1
2
3
PROGRAM (STORE) button. The  
TRACK  
display will show ”,  
“MEMORY” and “TRACK” will flash  
in the display.  
M
EMOR  
Y
Press the SKIP/SEARCH buttons  
TRACK  
either  
or  
until the desired  
track shows in the display.  
M
EMOR  
Y
Press the PROGRAM button. The  
TRACK  
display will show “  
”.  
Repeat steps 2&3 until all the  
desired tracks are programmed.  
4
5
M
EM  
ORY  
Press the PLAY button to start  
programmed play. “MEMORY” and  
“TRACK” will be steady in the  
display, the track number being  
played will show in the display.  
TRACK  
To change the current program  
Just create a new program following the programming procedure.  
To cancel Programmed Play  
Press the STOP button in programming mode.  
IB-SL328-SY-WM-E-120801  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
LISTENING TO THE RADIO  
4
1
6 3 2  
Connect the AC power cord (see page 3).  
Press the POWER switch, the AC POWER  
STANDBY INDICATOR will be off.  
1
2
3
Press the RADIO switch.  
Press the BAND switch to choose the  
proper band (AM or FM ) that you want.  
Tune into the station you prefer using  
the TUNING UP or DOWN button.  
Each time the button is pressed, the  
frequency changes. Keep the button  
pressed, the station will change rapidly  
(automatic tuning), release the button  
and it will stop at the next strong station.  
4
STEREO  
STEREO” will light up when receiving FM  
5
6
Stereo broadcasts.  
FM  
M
H
z
Press the GRAPHIC EQUALIZER button  
to choose different music effects  
(CLASSIC, ROCK, POP or flat).  
IB-SL328-SY-WM-E-120801  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRESETTING RADIO STATIONS  
Allows you to store your favorite stations for quick one button tuning.  
3
2&4  
Connect the AC power cord (see page 3).  
Follow Steps 1 to 4 (LISTENING TO  
THE RADIO on the previous page)  
to select a station.  
1
Press the PROGRAM (STORE)  
switch, “CHwill show and  
MEMORY” will flash in the display  
for about 5 seconds.  
STEREO  
STEREO  
STEREO  
2
CH  
M
H
z
FM  
While the “MEMORY” is flashing,  
press the PRESET (REPEAT)  
button to choose a memory location  
(01-20).  
3
CH  
M
H
z
FM  
Press the PROGRAM (STORE)  
button again to confirm, the station  
now broadcasting is stored into that  
CH  
4
M
H
z
FM  
preset memory location. “MEMORY”  
disappears from the display.  
NOTE: Steps 2-4 should be done quickly.  
Repeat the above steps to store other  
19 stations into memory.  
5
TIP: UP TO 20 AM AND 20 FM STATIONS CAN BE STORED INTO THE  
PRESET MEMORY LOCATIONS.  
IB-SL328-SY-WM-E-120801  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LISTENING TO THE PRESET STATIONS  
(after you programmed them)  
Connect the AC power  
cord (see page 3).  
Press the POWER switch, the  
dial will light.  
1
2
3
Press the RADIO switch.  
Press the AM/FM BAND  
switch to select the desired  
band.  
1
4
Press the PRESET (REPEAT)  
switch several times to  
choose a memory location  
(01-20). You will receive the  
station you stored into that  
preset memory location.  
4
3
2
USE THESE BUTTONS FOR ADDITIONAL  
OPERATIONS  
Press or Adjust  
To  
VOLUME + or  
VOLUME - switch  
1. Adjust the volume  
POWER switch  
EQ switch  
2. Turn off the radio  
2
3. Choose different  
sound effect  
1
3
TO IMPROVE BROADCAST RECEPTION  
Unwind and stretch out the FM antenna for FM or FM Stereo. Move the AM  
RIG HT LEFT  
ANTENNA for AM.  
SPEA KER  
FM ANTENNA: Unwind it  
and stretch out for better  
FM reception  
AM ANTENNA: Move it for  
better AM reception  
12  
IB-SL328-SY-WM-E-120801  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYING A TAPE  
1
2
INSERT THIS WAY  
4
3
Connect the AC power cord (see page 3).  
Press the POWER switch,  
the dial will light up.  
1
2
Press the TAPE switch.  
Press the STOP/EJECT  
button to open the tape  
compartment and insert a  
recorded tape as shown.  
3
4
5
Close the door.  
Press the PLAY button.  
The player turns on and  
starts playing.  
When the set finishes  
playing this side of the tape,  
the set will stop. To hear  
the other side of the tape,  
flip the tape over, then insert  
and press PLAY.  
AUTO STOP  
Press the EQ switch to choose different  
music effect (CLASSIC, ROCK, POP or flat).  
6
IB-SL328-SY-WM-E-120801  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USE THESE BUTTONS FOR ADDITIONAL  
OPERATIONS  
AC POWER  
STANDBY  
INDICATOR  
MUTE  
INDICATOR  
VOLUME +  
& VOLUME -  
EQUALIZER  
HEADPHONE  
JACK  
PLAY  
STOP/EJECT  
PAUSE  
REWIND & FAST FORWARD  
To  
Press or Adjust  
VOLUME + or VOLUME - switch  
Adjust the volume  
Get different sound effect  
Stop playback  
EQ switch  
STOP button  
FAST FORWARD button or  
REWIND button  
Fast forward or rewind  
the tape  
PAUSE button  
Press again to resume play after  
pause.  
Pause playback  
Eject the cassette  
STOP button  
To enjoy the music  
without disturbing others  
(Headphones are not  
included)  
Insert your headphone plug into  
the HEADPHONE Jack  
Press the MUTE button on the REMOTE,  
the MUTE INDICATOR will turn on, press  
it again to restore sound and the MUTE  
INDICATOR will go off.  
To turn off the sound instantly  
To shut the player off  
Press the POWER switch to OFF,  
the AC POWER STANDBY  
INDICATOR will be go on.  
IB-SL328-SY-WM-E-120801  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING ON A TAPE  
INSERT THIS WAY  
3
1
Connect the AC power cord (see page 3).  
Press the STOP/EJECT button  
to open the tape compartment  
and insert a blank tape. Select  
the program source (AM, FM or  
CD) you want to record.  
1
2
To record from the CD player,  
insert a CD and follow the steps  
to play a CD (see page 6).  
To record from a radio, press  
the RADIO switch, select AM or  
FM band and tune into the  
station you want (see page 10).  
Press the RECORD button to  
start recording. (The PLAY  
3
4
button  
is  
depressed  
automatically.)  
To hear what you recorded,  
press the TAPE switch, then  
press REWIND and PLAY.  
IB-SL328-SY-WM-E-120801  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USE THESE BUTTONS FOR  
ADDITIONAL OPERATIONS  
TIP  
To  
erase  
a
recording, just start  
a new recording,  
and the old one is  
a u t o m a t i c a l l y  
replaced.  
STOP/EJECT PAUSE  
Press or Adjust  
To  
STOP/EJECT button  
Stop recording  
Pause recording  
PAUSE button  
Press the button again  
to resume recording.  
Turn off the player  
Press the STOP/EJECT  
button and press the  
POWER switch to off, the  
AC POWER STANDBY  
INDICATOR will go on.  
NOTE: If the PLAY button pops up, your tape may  
have reached the end, reverse the tape or  
press REWIND.  
IB-SL328-SY-WM-E-120801  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRECAUTIONS  
On Safety  
On Operation  
As the laser beam used in the CD  
If the player is brought directly from a  
player section may be harmful to the  
eyes, do not attempt to disassemble  
cold to a warm location, or is placed  
in a very damp room, moisture may  
condense on the lens inside the CD  
player section. Should this occur, the  
player will not operate properly. In  
this case, remove the CD and wait  
about an hour for the moisture to  
evaporate. If the player has not been  
used for a long time, set it in the  
playback mode to warm it up for a few  
minutes before inserting a cassette.  
the cabinet.  
Refer servicing to  
qualified personnel only.  
Should any solid object or liquid fall  
into the player, unplug the player, and  
have it checked by qualified personnel  
before operating it any further.  
On Placement  
This CD player is designed to be  
Do not leave the player in a location  
played on  
a
stable no vibration  
near a heat source, or in a place  
subject to direct sunlight, excessive  
dust or mechanical shock.  
position. If you bump the set or table  
it is sitting on during CD play, the  
music will stop or skip for  
a few seconds. This is normal for this  
type of player.  
Do not place the player on an inclined  
or unstable place.  
If you have any questions or problems  
concerning your player, please contact  
our customer service department at  
1-800-315-5885.  
(Monday - Thursday 09:00 AM - 05:00 PM,  
Friday 09:00 AM - 01:00 PM EST)  
Do not place anything within 1 inch of  
the back of the cabinet. The  
ventilation holes must not be covered  
for the player to operate properly and  
prolong the life of its components.  
If the player is left in a car parked in  
the sun, be sure to choose a location  
in the car where the player will not be  
subjected to the direct rays of the  
sun.  
Since a strong magnet is used for the  
speakers, keep personal credit cards  
using magnetic coding or springwound  
watches away from the player to  
prevent possible damage from the  
magnets.  
IB-SL328-SY-WM-E-120801  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRECAUTIONS (continued)  
Notes on CDs  
Notes on Cassettes  
Before playing, clean the CD with a  
Break off the cassette tab from side A  
cleaning cloth. Wipe the CD from the  
center out.  
or B to prevent accidental recording.  
Side A  
Do not use solvents such as benzene,  
Tab for side A  
Tab for side B  
thinner, commercially available  
cleaners or anti-static spray intended  
for vinyl LPs.  
Do not expose the CD to direct  
To record on a tape with its tab broken  
off, cover the respective tab hole for  
side A or B with adhesive tape.  
sunlight or heat sources such as hot  
air ducts, nor leave it in a car parked  
in direct sunlight as there can be a  
considerable rise in temperature inside  
the car.  
The use of a cassette with more than  
90 minutes of play time is not  
recommended except for long  
continuous recording or playback.  
Do not stick paper or stickers on the  
CD, nor scratch the CD.  
To reduce the chances of tape  
After playing, store the CD in its case.  
jamming or tangling, you should check  
that there are no loose layers of tape  
visible through the cassette center  
window. If any, tighten these loose  
layers of tape using a pencil before  
inserting the cassette into the set.  
If there is a scratch, dirt or fingerprints  
on the CD, it may cause a tracking  
error or skipping.  
IB-SL328-SY-WM-E-120801  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANCE  
Cleaning the Lens  
Notes for Storing  
Cassette Tapes  
If the lens becomes dirty, it may cause a  
skipping of sound during CD operation.  
Clean with a commercially available lens  
cleaner and blower.  
1. Do not put a tape near a magnetic  
field, such as a TV, or speaker.  
Magnetic fields may reduce the tape  
sensitivity or even erase the  
recording.  
2. Do not store tape for any length of  
time in a hot, moist or dusty place.  
Cleaning the Tape Heads  
Wipe the heads, the pinch roller and  
the capstan with a cleaning swab slightly  
moistened with cleaning fluid or alcohol  
after every 10 hours of operation for  
optimum playback and recording quality.  
After cleaning, insert a tape when the  
areas cleaned are completely dry.  
Cleaning the Cabinet  
Clean the cabinet, panel and controls  
with a soft cloth slightly moistened with  
a mild detergent solution. Do not use  
any type of abrasive pad, scouring  
powder, or solvent, such as alcohol or  
benzene.  
CAPSTAN  
COTTON SWAB  
ERASE HEAD  
RECORD/PLAY BACK HEAD  
PINCH ROLLER  
NOTE: In order to see and clean the  
head, you may have to press  
PLAY first.  
IB-SL328-SY-WM-E-120801  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLE SHOOTING  
Problem  
Remedy  
Connect the AC power cord to a wall  
outlet securely.  
The power is not on.  
Make sure to press the right function  
switch as you want.  
Adjust the volume.  
Unplug the headphones when listening  
through speakers.  
flashes in the  
Insert the CD with the label side up.  
display even when a CD is  
in place.  
Make sure that the CD compartment is  
closed.  
Place the CD with the label side up.  
Clean the CD.  
Take out the CD and leave the CD DOOR  
open for about an hour to dry moisture  
condensation.  
CD does not play.  
Make sure the CD switch is pressed.  
Clean the CD, or replace it if the CD is  
badly damaged.  
The sound drops out.  
Place the player in a location free from  
vibration.  
FM sound is weak or has  
poor quality.  
Unwind the FM antenna and stretch out  
for better FM reception.  
Use the included AM loop antenna and plug  
its wire into the AM ANTENNA SOCKET at  
the back of the set, then rotate the AM  
antenna for better AM reception.  
AM is weak  
The RECORD button does  
not function/The tape does  
not play.  
Make sure the safety tab on the cassette  
is in place.  
Make sure the TAPE switch is pressed.  
The tape does not erase  
completely.  
Clean the erasing head (see page 19).  
Make sure the tape is inserted properly.  
Make sure the safety tab of the cassette  
is in place.  
The tape does not record.  
The sound is weak/The  
sound quality is poor.  
Clean the heads, pinch roller and capstan  
(see page 19).  
Cassette PLAY button pops  
up.  
The tape has reached its end. Remove it,  
flip to the other side and re-insert.  
20  
IB-SL328-SY-WM-E-120801  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATION  
General Description  
Power source:  
AC 120V, 60Hz 25 Watts  
2 - 44 ohm woofers, and  
Speakers (2 ways):  
2 - 24 ohm tweeters with crossover  
5.0W/channel  
Output power:  
Main set  
1
10”  
11”  
6.6LBs  
Speaker  
1
Dimensions (approx.):  
Width:  
Depth:  
Height:  
Weight:  
6
/ ”  
5
8
/ ”  
4
2
3
/ ”  
4
4
3
10 / ”  
4.4LBs  
CD Section  
Plays disc type:  
Laser wavelength:  
Tracking method:  
Any normal CD used in portable players  
760 - 800 NM  
3 - spot error detection  
3.86 mm lens  
Frequency response: 50Hz - 15kHz +1/-2 dB  
NOTE: This CD player will only play NORMAL music CDs (or CD-R CDs). This set  
will play CDRW encoded discs.  
Tape Recorder Section  
Frequency response: Standard normal bias cassette tape  
70Hz - 10kHz  
Radio Section  
Frequency range:  
87.5 - 108 MHz  
FM:  
AM: 530 - 1710 kHz  
LENOXX reserves the right to make design and specification changes for  
product improvement.  
PROTECT YOUR FINE FURNITURE!  
WE RECOMMEND A CLOTH OR OTHER PROTECTIVE MATERIAL BE PLACED  
UNDER THE SET WHEN PLACING IT ON SURFACE WITH A NATURAL OR  
LACQUER FINISH.  
For customer service  
Dial 1-800-315-5885  
(MONDAY - THURSDAY 09:00 AM - 05:00 PM, FRIDAY 09:00 AM - 01:00 PM EST)  
or Visit Our Website: http://www.lenoxx.com  
© 2001 LENOXX ELECTRONICS CORP.  
2 GERMAK DRIVE  
CARTERET, N.J. 07008  
MADE & PRINTED IN CHINA  
IB-SL328-SY-WM-E-120801  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Land Pride Lawn Mower 357 131A ZT72 User Manual
LG Electronics Flat Panel Television OLED55B6P User Manual
Lincoln Electric Welder DC 400 User Manual
Lindy Network Card 42960 User Manual
Lowepro Camera Accessories C840 User Manual
Magic Chef Range MEP5775BAF User Manual
Makita Chainsaw DCS6401 User Manual
Marantz DVD Player DV9600 User Manual
Melissa Microwave Oven 753 121 User Manual
Microsoft Photo Printer 63XPL PS User Manual