Lenoxx Electronics CD Player CDR 1902 User Manual

CD PLAYER  
DUALALARMDIGITALCLOCKRADIO  
MODEL CDR-1902  
OPERATING INSTRUCTIONS  
DUAL ALARMS - PERFECT FOR WEEKDAYS & WEEKENDS  
PLAYS MUSIC COMPACT DISCS  
FULLY PROGRAMMABLE CD PLAYER WITH REPEAT  
RECEIVES AM/FM BROADCASTS  
WAKE UP TO CD, RADIO OR BUZZER  
EASY TO SET CLOCK  
BATTERY BACK-UP (9V BATTERY NOT INCLUDED)  
PLEASE READ CAREFULLY BEFORE USE  
IB-CDR1902(TA)-WM-E-090902  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADDITIONAL SAFETY INSTRUCTIONS  
1. Power Sources - The appliance should be connected to a power supply only of the type  
described in the operating instructions or as marked on the appliance.  
2. Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling.  
3. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids  
are not spilled into the enclosure through openings.  
4. Servicing - The user should not attempt to service the appliance beyond that described in the operating  
instructions. All other servicing should be referred to qualified service personnel.  
5. Do not connect FM antenna wire to any outdoor antenna.  
Do not apply oil or petroleum products or solvents to any part of this set.  
CAUTION  
Use of controls or adjustments or performance of procedures other than those specified  
herein may result in hazardous radiation exposure.  
This compact disc player is classified as CLASS 1 LASER PRODUCT as stated on the  
bottom of the set.  
2
IB-CDR1902(TA)-WM-E-090902  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Setting the Clock  
TIME BUTTON  
CLOCK/CD  
DISPLAY  
HOUR BUTTON  
MINUTE BUTTON  
Connect the AC power cord into a live wall outlet.  
1
If the plug of the AC power cord does not  
match your outlet, do not force it.  
Reverse it and try again. This plug is  
polarized and only fits one way into the  
wall outlet.  
Clock display will show “12:00 ”.  
Hold the TIME button down,  
and press the HOUR button,  
until the right hour time shows  
in the display.  
2
3
PM indication lights up  
for PM time.  
Hold the TIME button down,  
and press the MINUTE  
button until the right minute  
time shows in the display.  
Example: 10:26 p.m.  
Refer to Page 10 Part 8. Setting the Alarm Times for setting alarm time.  
3
IB-CDR1902(TA)-WM-E-090902  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Playing a CD  
CD DOOR  
OPEN button  
POWER  
button  
CD DISPLAY  
button  
CLOCK/CD  
DISPLAY  
FUNCTION switch  
(on the left side)  
CD PLAY button  
Connect the AC power cord (see Setting the Clock).  
Press the POWER  
button to turn on the  
power, make sure the  
POWER lamp is on.  
Slide the FUNCTION  
switch to CD position.  
1
Press the CD DOOR  
OPEN button to open the  
CD Door and place the CD  
in the CD compartment.  
The label side of the CD  
should face upward.  
2
3
4
Close the CD DOOR by  
pushing it down at the right  
corner. The display will show  
the total track number of the  
disc for 5 seconds, then go  
back to clock time display.  
total track number  
POWER  
lamp  
of the disc  
Press the CD PLAY button. The  
player plays all the tracks once.  
Press the CD DISPLAY button,  
the display will show the track  
number of current play.  
CD Track  
number  
During CD play, the display still shows CLOCK time, press CD DISPLAY  
button if you want CD display.  
4
IB-CDR1902(TA)-WM-E-090902  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. More about CD operation  
Use these buttons for additional operations  
CD DOOR  
OPEN button  
POWER  
button  
POWER  
lamp  
VOLUME  
CONTROL  
CD Track  
Tip  
When CD play is  
paused, the CD  
track number will  
flash and no music  
will play.  
To  
Press or Adjust  
Adjust the volume  
Volume Control  
STOP  
Stop playback  
To resume play,  
press the PAUSE  
button again, CD  
track number will  
stop flashing and  
music will play.  
Pause playback  
PLAY/PAUSE  
CD track number will flash  
during pause. Press again  
to resume play after pause.  
SKIP/SEARCH  
FORWARD  
Go to the next track  
SKIP/SEARCH  
BACKWARD  
Go back to the previous  
track  
or  
while playing,  
Locate a point in a song  
press and hold down until  
you find the point.  
CD DOOR OPEN button  
Remove the CD  
(press  
first).  
Press the POWER button  
to turn off the power, the  
POWER lamp will be off.  
Turn off the CD player  
5
IB-CDR1902(TA)-WM-E-090902  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Playing CD tracks repeatedly (Repeat Play)  
POWER  
button  
REPEAT  
lamp  
FUNCTION switch  
(on the left side)  
REPEAT button  
1. Press the POWER button to turn on the power and slide the FUNCTION switch to  
CD position.  
2. Press  
(PLAY button).  
3. Press the CD REPEAT button.  
To repeat  
Press (during play)  
Repeat Lamp  
Flashing  
a single track (song)  
Press the REPEAT button once  
Press the REPEAT button twice  
all the tracks (all songs)  
Steady on  
4. You may select the individual track to repeat by pressing  
or  
.
To cancel Repeat Play  
Press the REPEAT button until the REPEAT lamp is off.  
6
IB-CDR1902(TA)-WM-E-090902  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Playing CD in programmed order  
You can make a program of up to 20 tracks in the order you want them to be played.  
PROGRAM  
lamp  
PROGRAM  
button  
1. Press the POWER button to turn on the power  
and slide the FUNCTION switch to CD position.  
Make sure the CD is stopped.  
2. Press the PROGRAM button. The letters  
“P01” will show and the PROGRAM lamp will  
flash.  
3. Press  
or  
to select the tracks you want  
to program in the order you want.  
4. Press the PROGRAM button to confirm. The  
letters “P02” will show.  
5. Repeat steps 3 and 4. You can program up to  
20 tracks.  
6. Press  
to start programmed play. The  
PROGRAM lamp will show steadily on the  
display.  
To change the current program  
Just create a new program following the programming procedure.  
To cancel Programmed Play  
Press the STOP button to stop programmed play. Press the STOP button again after  
pressing the PROGRAM button or press the CD DOOR OPEN button to open the CD  
door, and the PROGRAM lamp goes off.  
7
IB-CDR1902(TA)-WM-E-090902  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Listening to the radio  
RIGHT SIDE VIEW  
LEFT SIDE VIEW  
FUNCTION  
SWITCH  
VOLUME  
CONTROL  
TUNING  
CONTROL  
BAND  
SWITCH  
Connect the supplied AC power cord (see Setting the Clock).  
Press the POWER button to  
ON and slide the FUNCTION  
switch to RADIO position.  
1
2
Slide the BAND switch to the proper  
band position that you want.  
Tune into the station you prefer using  
the TUNING CONTROL. Adjust for the  
clearest sound.  
3
4
Adjust the VOLUME CONTROL for  
desired loudness.  
Press the POWER button to turn off the  
power and the Radio, the POWER lamp  
will go off.  
5
8
IB-CDR1902(TA)-WM-E-090902  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. More about radio operation  
PHONES jack  
FM ANTENNA  
BATTERY COMPARTMENT  
(at the bottom of the set)  
To improve broadcast reception  
Fully stretch out the FM ANTENNA for better FM reception.  
Reorient the player itself for better AM reception.  
Or locate the set near a window.  
To listen without disturbing others  
Connect your headphones (optional - not included) into the PHONES jack at the back  
of the set. The speaker will automatically be silenced. Remember to unplug the  
headphones if you want the set to wake you up in the morning.  
To use battery backup  
Install a 9V battery for Clock backup, so that if your home power is momentarily off, you  
will not have to set up the time & alarm settings.  
Note: The display will not show the time but the time will be kept in memory and will re-  
appear when power is restored.  
9
IB-CDR1902(TA)-WM-E-090902  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. Setting the Alarm Time  
This set has dual alarms. You may set ALARM 1 to wake you at a certain time,  
or ALARM 2 to wake you at a different time, or ALARM 1+2 - both alarms will  
sound at the times you set.  
This feature is useful for a husband & wife waking up at different times or a single  
person who likes to wake up at different times during weekdays or holidays.  
To set ALARM 1, slide the ALARM SET switch to position 1,  
the ALARM 1 lamp will turn on.  
To set ALARM 2, slide the ALARM SET switch to position 2,  
the ALARM 2 lamp will turn on.  
RIGHT SIDE VIEW  
FRONT SIDE VIEW  
ALARM  
ALARM 1  
lamp  
ALARM 2  
lamp  
MINUTE HOUR  
ALARM SET switch  
Hold the ALARM button.  
1
2
Press the HOUR button to select correct hour  
time. Release the HOUR button but continue to  
press the ALARM button.  
Press the MINUTE button for correct minute.  
3
4
Release the ALARM button, the clock display  
will show the normal time of day.  
NOTE 1: The alarm times can not be set when the ALARM SET button is switched  
to OFF or ALARM 1+2 position.  
NOTE 2: If you want to be waked up in the morning, the PM lamp should be off on  
alarm time (when pressing ALARM button). To change PM to AM time,  
advance time 12 hours.  
NOTE 3: To wake to ALARM 1 time, slide ALARM SET switch to position 1.  
To wake to ALARM 2 time, slide ALARM SET switch to position 2.  
To wake to both times, slide ALARM SET switch to position 1+2.  
10  
IB-CDR1902(TA)-WM-E-090902  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9. Waking up to alarm or music  
1. Waking up to alarm  
1.Set the alarm time as previously instructed  
and slide the ALARM SET switch to ALARM  
1, ALARM 2 or ALARM 1+2, the proper  
ALARM lamp will be on.  
2.Set the FUNCTION switch to BUZZER  
position.  
Alarm buzzer will sound at the set alarm time.  
2. Waking up to CD  
1. Set the alarm time as previously instructed  
and slide the ALARM SET switch to ALARM  
1, ALARM 2 or ALARM 1+2, the proper  
ALARM lamp will be on.  
2. Set the FUNCTION switch to CD  
position.  
3. Make sure there is a CD disc loaded in  
the compartment and POWER lamp is  
off.  
The CD Disc will start playing from the first track at  
the set alarm time.  
3. Waking up to radio  
1. Refer to Listen to the radio for radio  
operation instructions. Select the desired  
AM or FM band using the BAND switch  
and TUNING knob.  
2. Set the alarm time as previously instructed  
and slide the ALARM SET button to ALARM  
1, ALARM 2 or ALARM 1+2, the proper  
ALARM lamp will be on.  
3. Set the FUNCTION switch to RADIO  
position.  
4. Press the POWER button to turn off the  
power, make sure the POWER lamp is off.  
The radio will start playing at the set alarm time.  
11  
IB-CDR1902(TA)-WM-E-090902  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10. Snooze and Sleep functions  
When alarm or music comes on  
1. To sleep extra 6 minutes  
Just press the SNOOZE button, the alarm or music  
will stop and come on after 6 minutes.  
2. To stop the alarm or music  
Just press the ALARM OFF (POWER) button, the  
alarm or music will stop and come on next day.  
Going to Sleep with CD music  
1. Follow steps 1-4 of Playing a CD on Page 4 to  
start the CD play.  
2. Press the SLEEP button,the display will show two  
dashes “--”, and the SLEEP lamp flashes in the  
display.  
Press the SLEEP Button to select the desired  
playing time (90 minutes, 60 minutes or 30  
minutes).  
3. The music will play for the time you selected, and  
the SLEEP lamp will show on the display.  
4. The CD will stop automatically after the selected  
playing time, and the SLEEP lamp will be off.  
5. To shut off the music before the time is up, press  
the POWER button.  
Going to Sleep with RADIO  
1. Follow steps 1-4 of Listening to the Radio on  
Page 8 to start the RADIO play.  
2. Press the SLEEP button,the display will show two  
dashes “--”, and the SLEEP lamp flashes in the  
display.  
Press the SLEEP Button repeatedly to select the  
desired playing time (90 minutes, 60 minutes or  
30 minutes).  
3. The music will play for the time you selected, and  
the SLEEP lamp will show on the display.  
4. The RADIO will stop automatically after the  
selected playing time, and the SLEEP lamp will be  
off.  
5. To shut off the music before the time is up, press  
the POWER button.  
12  
IB-CDR1902(TA)-WM-E-090902  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions  
On safety  
On power sources  
As the laser beam used in the CD  
player section is harmful to the eyes,  
do not attempt to disassemble the  
casing. Refer servicing to qualified  
personnel only.  
For battery backup, you may use a 9V  
battery (optional), so that you will not  
have to re-set the clock every time you  
disconnect the power.  
The nameplate indicating operating  
voltage, power consumption, etc. is  
located at the bottom of the set.  
Should any solid object or liquid fall into  
the player, unplug the player, and have  
it checked by qualified personnel  
before operating it any further.  
On operation  
If the player is brought directly from a  
On placement  
cold to a warm location, or is placed in  
a very damp room, moisture may  
condense on the lens inside the CD  
player section. Should this occur, the  
player will not operate properly. In this  
case, remove the CD and wait about  
an hour for the moisture to evaporate.  
Do not leave the player in a location  
near heat source, or in a place subject  
to direct sunlight, excessive dust or  
mechanical shock or vibration.  
Do not place the player on an inclined  
or unstable place.  
This CD player is designed to be played  
Do not place anything within 1 inch of  
on a stable no vibration position. If you  
bump the set during CD play, the music  
will stop or skip for a few seconds. This  
is normal for this type of player.  
the back of the cabinet. The ventilation  
holes must be unobstructed for the  
player to operate properly and prolong  
the life of its components.  
If you have any questions or problems  
concerning your player, please contact  
our customer service department.  
Since a strong magnet is used for the  
speakers, keep personal credit cards  
using magnetic coding or spring-  
wound watches away from the player  
to prevent possible damage from the  
magnet.  
13  
IB-CDR1902(TA)-WM-E-090902  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions (continued)  
Cleaning the lens  
Notes on CDs  
If the lens becomes dirty, it may cause a  
skipping of sound during CD operation.  
Clean with a commercially available lens  
cleaner blower or a cotton swab.  
Before playing, clean the CD with a  
cleaning cloth. Wipe the CD from the  
center out.  
Do not use solvents such as benzene,  
thinner,  
commercially  
available  
cleaners or anti-static spray intended  
for vinyl LPs.  
Do not expose the CD to direct  
sunlight or heat sources such as hot  
air ducts, nor leave it in a car parked  
in direct sunlight as there can be a  
considerable rise in temperature inside  
the car.  
Cleaning the cabinet  
Clean the cabinet, panel and controls with  
a soft cloth slightly moistened with a mild  
detergent solution. Do not use any type of  
abrasive pad, scouring powder, or solvent,  
such as alcohol or benzene.  
Do not stick paper or sticker on the  
CD, nor scratch the surface of the CD.  
After playing, store the CD in its case.  
If there is a scratch, dirt or fingerprints  
on the CD, it may cause tracking error.  
14  
IB-CDR1902(TA)-WM-E-090902  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Trouble Shooting  
Remedy  
Problem  
Connect the AC power cord to a wall  
outlet securely. Make sure that outlet  
has power.  
The power is not on.  
Make sure the FUNCTION switch is at the  
right position as you want.  
There is no sound.  
Adjust the volume.  
Unplug the headphones when listening  
through speakers.  
AM or PM not set correctly. Is alarm time  
set in AM range (PM lamp off)?  
Alarm does not come on in the  
morning.  
ALARM SET switch is in OFF position. Are  
the ALARM INDICATORS off?  
ALARM SET switch is not in the proper position.  
” appears in the display  
Insert the CD with the label side up.  
even when a CD is in place.  
Make sure that the CD compartment is  
closed.  
CD play is paused, press  
again.  
Take out the CD and leave the CD door  
open for about an hour to dry moisture  
condensation.  
CD does not play.  
Make sure the FUNCTION switch is at CD  
position.  
Clean the CD, or replace it if the CD is badly  
damaged.  
The sound drops out.  
Place the player in a location free from  
vibration.  
It is normal since the radio uses less power  
than the CD player.  
CD does not play while radio  
may continue to play.  
Fully stretch out the FM antenna to improve  
FM reception.  
The sound is weak or has poor  
quality.  
Bring the set near a window, or rotate the  
set for AM reception.  
15  
IB-CDR1902(TA)-WM-E-090902  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specification  
GENERAL DESCRIPTION  
Power source:  
AC 120V, 60Hz 10Watts  
DC 9V (optional - for clock backup)  
Speakers:  
38 ohm  
Output power:  
Dimensions:  
1.5W  
Width: 10”  
Depth: 7”  
Height: 4 1/2”  
Weight: 7 LBs (without battery)  
CD SECTION  
Plays disc type:  
Laser wavelength:  
Tracking method:  
Any compact discs bearing this logo  
760 - 800 NM  
3 - spot error detection 3.86 mm lens  
Frequency response: 50 Hz - 15 kHz (+1/-2dB)  
NOTE: This CD player will only play NORMAL music CDs (or CD-R CDs).  
This set will not play CDRW encoded discs.  
RADIO SECTION  
Frequency range:  
FM: 88 - 108 MHz  
AM: 530 - 1700 kHz  
LENOXX reserves the right to make design and specification changes for product  
improvement.  
PROTECT YOUR FINE FURNITURE!  
WE RECOMMEND A CLOTH OR OTHER PROTECTIVE MATERIAL BE PLACED  
UNDER THE SET WHEN PLACING IT ON SURFACE WITH A NATURAL OR LACQUER  
FINISH.  
For customer service  
Dial 1-800-315-5885  
(MONDAY - THURSDAY 9:00 AM - 5:00 PM, FRIDAY 9:00 AM - 1:00 PM EST)  
or Visit Our Website: http://www.lenoxx.com  
© 2002 LENOXX ELECTRONICS CORP.  
2 GERMAK DRIVE  
CARTERET, N.J. 07008  
MADE & PRINTED IN CHINA  
16  
IB-CDR1902(TA)-WM-E-090902  
Download from Www.Somanuals.com. All Manuals Search And Download.  

LaCie Switch 2big metwork User Manual
Lenmar Enterprises Computer Drive ACUSB3K W User Manual
LG Electronics Car Video System 19M37A User Manual
LG Electronics Flat Panel Television PM9700 User Manual
Liebert Power Supply GXTTM User Manual
Life Fitness Home Gym 8245102 User Manual
Link electronic Stereo Amplifier LEI 555 User Manual
Lund Industries Computer Monitor FE CSMTS User Manual
Mace Digital Camera CAM 73 User Manual
McCulloch Chainsaw MAC 3 14XT User Manual