Machine type: 10093/2561/4746
H5s Series
User Guide
Version 1.0
2012.02
31501722
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Information
Before using this manual, it is important that you read and understand all of the
related safety information for this product. Refer to the Safety and Warranty Guide
that you received with this product for the latest safety information. Reading and
understanding this safety information reduces the risk of personal injury or damage
to your product.
Danger: Be aware of extremely hazardous or lethal situations.
Attention: Be aware of possible damage to programs, devices, or data.
Note: Pay attention to this important information.
© Copyright Lenovo 2012. All rights reserved.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered
pursuant a General Services Administration “GSA” contract, use, reproduction, or
disclosure is subject to restrictions set forth in Contract No. GS-35F-05925.
© 2012. Lenovo
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter
Using the Computer Hardware
This chapter contains the following
topics:
Computer hardware introduction
Information on computer connections
Note: The descriptions in this chapter
might be different from what you see on
your computer, depending on the computer
models and configurations.
User Guide
1
Download from Www.Somanuals.com. All Manuals Search And Download.
1.1 Front view of the chassis
Attention: Be careful not to block any air vents on the computer. Blocked
air vents can cause overheating.
Power button
Memory card reader (selected models only)
USB connectors
Optical drive eject button
Headphone connector
Optical Drive (selected models only)
Hard disk drive indicator
Microphone connector
Note: This computer only can be placed in a vertical position.
Attention: Do not insert 3-inch discs into the optical drive.
2
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1.2 Rear view of the chassis
(If the rear view configuration shown in this chapter is different from the rear of your
computer, please refer to the rear of your computer.)
USB connectors
WiFi antenna (selected models only)
HDMI connector (selected models only)
On-board VGA connector
Ethernet connector
Audio connectors
PCI Express X 16 graphics adapter connector (some models are equipped
with a graphics card)
PCI Express X 1 adapter connector (some models are equipped with USB
3.0 or TV tuner card)
Power connector
Voltage selection switch (selected models only)
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Note: If your model has two VGA monitor connectors, be sure to use the
connector on the graphics adapter.
Attention: Do not open the WiFi antenna cover.
1.3 Connecting your computer
Use the following information when connecting your computer.
•
Look for the small connector icons on the back of your computer. Match the
connectors to the icons.
•
If your computer cables and connector panel have color-coded connectors,
match the color of the cable end with the color of the connector.
Note: Your computer may not have all of the connectors described in this
section.
1.3.1 Check the position of the voltage-selection switch on
the rear of the computer. Use a ballpoint pen to slide the
switch if necessary.
Note: Some computers do not have a voltage switch. These computers
control voltage automatically.
•
•
If the voltage supply range is 100-127 V AC, set the switch to 115 V.
If the voltage supply range is 200-240 V AC, set the switch to 230 V.
230
115
1.3.2 Basic connector instructions
Connector
Description
Microphone
Use this connector to attach a microphone to your
computer when you want to record sound or if you
use speech-recognition software.
4
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Headphone
Use this connector to attach headphones to your
computer when you want to listen to music or
other sounds without disturbing anyone.
Audio line-in connector
Used to receive audio signals from an external
audio device, such as a stereo system. When
you attach an external audio device, a cable is
connected between the audio line-out connector
of the device and the audio line-in connector of
the computer.
Audio line-out connector
Used to send audio signals from the computer
to external devices, such as powered stereo
speakers (speakers with built-in amplifiers),
headphones, multimedia keyboards, or the audio
line-in connector on a stereo system or other
external recording device.
USB connector
Use this connector to attach a device that requires
a USB connection.
Ethernet connector
VGA connector
Use this connector to attach the computer to an
Ethernet-type local area network.
Used to attach a VGA monitor or other devices
that use a VGA monitor connector.
DVI connector
Used to attach a DVI monitor or other devices that
use a DVI monitor connector.
HDMI connector (optional)
Connects to the HDMI connector on your display
or TV.
TV-Tuner connector (optional) Only supported on systems with optional TV tuner
card.
Note: If your computer is equipped with a wireless keyboard or mouse,
follow the installation instructions for those devices.
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
5
1.4 Audio configuration instruction
(This instruction is only for PC models whose mainboard
supports audio transforming from 2.0 stereo to 5.1
surround.)
This model of computer supports transforming stereo sound into 5.1 surround
sound.
Use the following guides when connecting to the 5.1 surround audio device:
Blue line-in connector
Surround
Green line-out connector
Front channel
Pink Mic-in connector
Center-LEF
The configurations are as follows:
1. Right click the sound icon in system property bar and select the sounds option
to setup the sounds in the pop-up dialog box.
2. Select a playback device from the playback dialog box, and then click the
configure button to configure it.
3. Select 5.1 surround from audio channels in the pop-up speaker setup dialog
box to proceed with the speaker setup by following as prompted.
4. After the configuration, 5.1 surround can be used.
Note: If the audio configuration interfaces in above differ from your actual
computer, you may use the above steps as reference to configure the 5.1
surround audio device in your actual audio configuration interface and read
the electronic help information for further assistance.
6
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1.5 Connect the power cords properly to grounded
electrical outlets
1.6 How to play Blu-ray Discs (selected models only)
Check the connectors available on your computer and display and select an
appropriate cable according to this table. Because other types of cables do not
meet the requirements of the Blu-ray standard.
You need to purchase the cable separately if the computer is not equipped with
the corresponding cable.
This table will help you to identify the connectors on your computer and display.
Connection Type Computer
Cable
Display
DVI to DVI
(DVI cable)
ꢀ
DVI to HDMI
(DVI-HDMI
cable)
ꢀ
HDMI to HDMI
(HDMI cable)
ꢀ
HDMI to DVI
(HDMI-DVI
cable)
ꢀ
User Guide
7
Download from Www.Somanuals.com. All Manuals Search And Download.
1.7 Wired keyboard (selected models only)
LVT —— After entering Windows, press this key to launch the LVT (Lenovo
Vantage Technology) program, Lenovo’s pre-loaded Home PC software.
In addition to its own functions, the LVT program will allow you to start
other Windows compatible software, specially configured to run on this
model of computer.
F2 —— Your computer has the Lenovo Rescue System installed. To learn more
about this program, repeatedly press and release the F2 key once
turning on the computer until the Lenovo Rescue System open.
8
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter
Using the Rescue System
This chapter contains the following
topics:
OneKey Recovery
Driver and Application Installation
System Setup
System Backup
System Recovery
Create Recovery Disc
Attention: Using this program will result in
loss of data.
•
You can restore the C: drive of the computer
to factory default settings or to the last
system backup status using OneKey
Recovery. If you do this, all of the existing
data on drive C: will be lost, but the content
and format of the other partitions of the hard
disk drive will remain unchanged.
•
If you want to install an operating system
and back it up with OneKey Recovery, you
must format the C: partition in NTFS format
and install the operating system on the C:
partition. Otherwise, the OneKey Recovery
system cannot run.
User Guide
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Note about the service partition:
The files and relevant data used by the rescue system are saved in the service
partition. Deleting this partition will make the rescue system unusable. For more
detailed information, see the following instructions:
By selecting Control Panel → Administrative Tools → Computer Management
→ Disk Management, you can see the service partition, which must not be
deleted.
Note: The recovery files and relevant data used by the rescue system are
saved in the service partition. If the service partition is deleted or damaged
by someone other than authorized Lenovo service personnel, Lenovo will
not be liable for any losses arising therefrom in any way.
2.1 OneKey Recovery
OneKey Recovery is an easy-to-use application. You can use it to restore your
computer to the system default or to a previously backed up state.
Detailed Operation Procedure
1. Repeatedly press and release the F2 key once turning on the computer until
the Lenovo Rescue System open, then select OneKey Recovery.
Note: System Recovery will overwrite all of the data on the C: drive. To
prevent loss of data, be sure to back up relevant data before performing
system recovery.
2. Follow the on-screen instructions to select the backup task you want to restore
from and the disk where you want to install the operating system, then press
Next to start the restore.
3. Please wait during the process of system recovery. Do not interrupt the
operation during the recovery process.
4. After the system is recovered successfully, the software will prompt you to
restart the computer. Restart the computer and start the operating system.
2.2 Driver and Application Installation
The Driver and Application Installation function in the rescue system provides a
way for the user to conveniently reinstall all of the Lenovo applications and drivers
that were shipped with your Lenovo hardware.
10 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Method 1: Automatic Installation
Repeatedly press and release the F2 key once turning on the computer until the
Lenovo Rescue System open, then select Drivers and Application Installation.
Follow the on-screen prompts to install the Lenovo drivers and applications.
Click Install to start installing the Lenovo Drivers and Application Installation
software.
The system will restart. After the system has restarted, the installation process will
continue until it has completed.
Method 2: Manual Installation
In the Windows system, Click Start → All Programs → Lenovo → Lenovo
Drivers and Application Installation.
After starting the procedure, install all the drivers and software manually by
following the prompts.
Notes:
1. Do not install software which is already installed on the computer.
2. Make sure that the Drivers and Application Installation software has
been automatically installed before starting the operating system. The
manual installation function can only be used after the software has
been installed.
2.3 System Setup
System Setup configures the network configuration for the Lenovo Rescue
System to ensure your Rescue System can connect to internet. In addition, System
Setup sets and manages all passwords for the Lenovo Rescue system.
2.3.1 Launch
Repeatedly press and release the F2 key once turning on the computer until the
Lenovo Rescue System open, then select System Setup.
2.3.2 Network Settings
Depending on the network access mode of the computer, select “ADSL” or “LAN
Connection” in the network connection modes.
1. If you select “ADSL” input the username and password of the ADSL
connection.
User Guide 11
Download from Www.Somanuals.com. All Manuals Search And Download.
2. If you select “LAN connection” configure the IP address and proxy server of the
LAN.
2.3.3 Password Management
Password Management allows you to set and manage the password for Lenovo
Rescue System.
The default password is blank.
Set a password when you access Password Management for the first time.
If you don’t want to set a password, access the system directly and operate it
accordingly.
2.4 System Backup
This backs up your system partition to an image file. In case of a system failure,
you can restore your system from this image file.
In the Windows system, click Start → All Programs → Lenovo → Lenovo
Rescue System.
After starting Rescue System, click System Backup to back up your system
partition by following the prompts.
2.5 System Recovery
Reboot your computer into the system recovery environment. You can choose to
restore to a system backup point or the initial state (factory default settings).
2.6 Create Recovery Disc
Create a bootable recovery disc from the current system. These recovery discs
are used to boot your computer and will guide you through the entire restoration
process.
In the Windows system, click Start → All Programs → Lenovo → Lenovo
Rescue System.
After starting Rescue System, click Create Recovery Disc to create a bootable
recovery disc from the current system.
Follow the on-screen prompts to create recovery discs.
12 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting and
Confirming Setup
Chapter
This chapter contains the following
topics:
Troubleshooting and Problem Resolution
Note: The description of the TV tuner card
in this manual is only used for the machines
which have the TV tuner card. It does not
apply to those machines that do not have a
TV tuner card.
User Guide 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Solving Problems
Follow these tips when troubleshooting your computer:
•
•
•
•
If you added or removed a part before the problem started, review the
installation procedures to ensure that the part is correctly installed.
If a peripheral device does not work, ensure that the device is properly
connected.
If an error message appears on the screen, write down the exact message.
This message may help support personnel diagnose and fix the problem(s).
If an error message occurs in a program, see the program’s documentation.
Note: The procedures in this document were written for the Windows
default view, so they may not apply if you set your Lenovo® computer to
the Windows Classic view.
3.1 Troubleshooting Display Problems
Problem: Blank screen or no image is displayed on the monitor.
Troubleshooting and problem resolution:
1. Check to see if the monitor has been turned on; if not, press the Power button.
2. Check to see if the monitor power cord is loose; if so, plug the power cord
securely into the monitor.
3. Check to see if the signal cable to the monitor is securely connected to the
connector on the computer graphics card; if not, shut down the computer
then connect the signal cable of the monitor securely to the connector on the
computer graphics card.
Problem: You need to change the display property settings.
Setting display background and icon properties:
1. Right-click the desktop anywhere except over an icon, then select Personalize
from the pop-up menu.
2. From here, select the appropriate options to:
•
•
•
•
Change the desktop background
Select a screen saver
Select colors and appearance options for icons and text
Set resolution and colors in the Display Settings options
14 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem: Ripple on screen.
Troubleshooting and problem resolution:
1. Check to see if any of the following devices are located less than one meter
from the computer: refrigerators, electric fans, electric dryers, UPS systems,
regulators, fluorescent lamps or other computers that may be generating
magnetic interference.
2. Move any interfering devices away from the computer.
3. If the problem persists, contact Lenovo Service.
3.2 Troubleshooting Audio Problems
Problem: No sound from the integrated speakers.
Troubleshooting and problem resolution:
•
Adjust the Windows volume control — double-click the speaker icon in the
lower-right corner of your screen. Ensure that the volume is turned up and the
sound is not muted. Adjust the volume, bass, or treble controls to eliminate
distortion.
•
•
Reinstall the audio driver.
Disconnect any headphones from the headphone connector — sound from
the speakers is automatically disabled when headphones are connected to the
computer’s side-panel headphone connector.
Problem: No sound from headphones.
Troubleshooting and problem resolution:
•
Check the headphone cable connection — ensure that the headphone cable is
securely inserted into the headphone connector.
•
Adjust the Windows volume control — click or double-click the speaker icon in
the lower-right corner of your screen. Ensure that the volume is turned up and
the sound is not muted.
3.3 Troubleshooting Software Problems
Problem: You are unable exit a running program normally.
Troubleshooting and problem resolution:
1. Open the Task Manager window by pressing Ctrl, Alt and Delete at the same
time.
2. Select the Application tab, select the problem program, then click the End
Task button.
User Guide 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem: You need to install or uninstall a program.
Problem resolution:
During installation never abort the install process by powering the system off or
through other drastic means. This can cause system program disorder or even
failure during system initialization.
During the uninstall process, never directly delete the files or folders. This is
harmful to the system, and might cause a system-wide malfunction.
Use the following procedure to properly uninstall programs:
1. Back up all documents and system settings related to the program before
removing it.
2. If the program has its own uninstaller, run it directly to uninstall the program.
3. If the program does not have its own uninstaller, then select Control Panel from
the Start menu.
4. From the Control Panel, choose Programs and Functions.
5. Find the applicable program from the Programs and Functions dialog box and
then select Uninstall/Modify.
6. Perform the instructions displayed to uninstall the software.
3.4 Troubleshooting Problems with Optical Drives and
Hard Disks
Problem: The Optical drive is unable to read a CD/DVD.
Troubleshooting and problem resolution:
1. Check to determine if there is an optical drive icon in the resource manager
of the operating system. If not, restart your computer. If there is still no icon,
contact Lenovo Service. Otherwise, continue with the next step of this
procedure.
2. Confirm that the CD/DVD has been properly placed in the drive. If not, reload
the CD or DVD. Otherwise, continue with the next step of this procedure.
3. Check the specifications that came with your computer to confirm that this
optical drive is capable of reading this type of CD or DVD.
4. If the CD/DVD cannot be read, replace it with a known good CD/DVD such as
one that was shipped with the computer.
5. If the known good CD cannot be read, visually check the operating side of the
CD/DVD for defects.
16 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem: The capacity of the hard disk, as indicated by the system, is less than
the nominal capacity.
Troubleshooting and problem resolution: For computers equipped with the
OneKey Recovery feature, the system recovery feature needs to occupy some
hard disk space. This may account for the apparent hard disk capacity deficit.
Further Technical Explanation: The nominal capacity of the hard disk is
expressed in the decimal system, 1000 bytes. But the actual hard disk capacity is
expressed in the binary system as 1024 bytes (For example, the nominal capacity
1G is 1000M, while the actual capacity 1G is 1024M).
The capacity of the hard disk shown in Windows can be calculated according to
the calculations in the following example:
The nominal capacity of the hard disk is 40G, while its actual capacity
should be: 40 x 1000 x 1000 x 1000/(1024 x 1024 x 1024) = 37G.
If the Service partition of 3G - 3 x 1000 x 1000 x 1000/(1024 x 1024 x
1024) = 2.79G is subtracted, the capacity of the hard disk shown in the
system can be obtained.
The capacity of the hard disk as calculated using this method may be slightly
different from the actual capacity due to the rounding of totals.
3.5 Special considerations for troubleshooting Windows
Record the following information as it may be useful later when troubleshooting
system problems:
1. The serial number of the software. The serial number was shipped with the
computer and provided separately by the manufacturer. The Help Center is
unable to retrieve this number.
2. The drivers for this computer model only support the Windows 7 system.
3. When you use the Windows Media Center to watch TV, be particularly attentive
to the following:
•
In the following two situations, you must re-save a channel list:
a. When you change your TV signal from digital to analog, your saved
channel list for digital TV is deleted. When you want to watch digital TV
again, you must create and save a new channel list.
b. When you change your TV signal from analog to digital, your saved
channel list for analog TV is deleted. When you want to watch analog
TV again, you must create and save a new channel list.
User Guide 17
Download from Www.Somanuals.com. All Manuals Search And Download.
•
You must set the TV tuner input signal to analog before you can watch
Teletext programming.
3.6 Performing Daily Maintenance Tasks
Cleaning the computer components
Because many of the computer components consist of sophisticated integrated
circuit boards, it is very important to periodically clean the computer to prevent
dust buildup. The cleaning supplies you need to clean the components include:
a vacuum cleaner, a soft cotton cloth, clear water (preferably purified or distilled
water) and cotton swabs.
Attention: Before you clean your computer, disconnect the computer
from the electrical outlet. Clean your computer with a soft cloth
dampened with water. Do not use liquid or aerosol cleaners, which may
contain flammable substances.
Note: To avoid damaging the computer or display, do not spray cleaning
solution directly onto the display. Only use products specifically designed
for cleaning displays, and follow the instructions included with the product.
The following are general methods for cleaning the components:
•
You can use a soft cloth to remove dust on the surface of the computer, the
monitor, the printer, the speakers and the mouse.
•
•
You can use a vacuum cleaner to clean in otherwise inaccessible corners.
To clean the keyboard thoroughly, shut down the computer and scrub it gently
with a wet cloth. Do not use the keyboard until it is dry.
Do not do any of the following:
•
•
•
Allow water to enter the computer.
Use a heavily dampened cloth.
Spray water directly onto the surface of the monitor or inside the computer.
LCD monitors should be cleaned daily. Use a dry cloth to brush dust from the
monitor and keyboard every day. Keep all surfaces clean and free of grease stains.
18 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter
Hardware Replacement Guide
This chapter contains the following
topics:
Identifying internal components
Identifying parts on the system board
Removing the computer cover
Removing the front bezel
Replacing a memory module
Replacing a hard disk drive
Replacing an optical drive
Replacing the keyboard and mouse
User Guide 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
This guide is intended to be used by customers who are replacing Customer
Replaceable Units (CRUs) as well as trained service personnel who are replacing
Field Replaceable Units (FRUs). In this guide, CRUs and FRUs will often be referred
to as parts.
Note: Trained service personnel should refer to the Hardware Maintenance
Manual (HMM) for parts ordering information.
This guide does not include procedures for all parts. It is expected that cables,
switches, and certain mechanical parts can be replaced by trained service
personnel without the need for step-by-step procedures.
Note: Use only parts provided by Lenovo®.
The description of the TV-Tuner card in this manual applies only to computer
models that have a TV-Tuner card installed. It does not apply to computer models
that do not have a TV-Tuner card installed.
This guide contains procedures for replacing the following parts:
•
•
•
•
Memory modules
Hard disk drive
Optical drive
Keyboard, Mouse (wired)
Safety information for replacing CRUs
Do not open your computer or attempt any repair before reading the “Important
safety information” in the Safety and Warranty Guide that was included with your
computer. If you no longer have this copy of the Safety and Warranty Guide, you
can obtain one online from the Support Web site at
20 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information resources
If you have Internet access, the most up-to-date information for your computer is
available from the World Wide Web.
You can find the following information:
•
•
•
•
•
CRU removal and installation information
Publications
Troubleshooting information
Parts information
Links to other useful sources of information
Tools required
To disassemble the computer, you need the following tools:
•
•
•
•
•
•
Wrist grounding strap and conductive mat for preventing electrostatic discharge
Flat screwdriver
Phillips screwdriver
Hex screwdriver
Plastic flat screwdriver
Plastic tweezers
Note: The screws for different components vary in size. During the
disassembly procedure, group the screws with their corresponding
components to avoid a mismatch when replacing the components.
User Guide 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Handling static-sensitive devices
Static electricity, although harmless to you, can seriously damage computer
components.
When you are replacing a part, do not open the anti-static package containing the
new part until the defective part has been removed from the computer and you are
ready to install the new part.
When you handle parts and other computer components, take these precautions
to avoid static electricity damage:
•
Limit your movement. Movement can cause static electricity to build up around
you.
•
Always handle parts and other computer components carefully. Handle
adapters, memory modules, system boards, and microprocessors by the
edges. Never touch any exposed circuitry.
•
•
Prevent others from touching the parts and other computer components.
Before you replace a new part, touch the anti-static package containing the
part to a metal expansion slot cover or other unpainted metal surface on
the computer for at least two seconds. This reduces static electricity in the
package and your body.
•
•
When possible, remove the new part from the anti-static packaging and install
it directly in the computer without setting the part down. When this is not
possible, place the anti-static package that the part came in on a smooth, level
surface and place the part on it.
Do not place the part on the computer cover or other metal surface.
4.1 Locations
This section provides illustrations to help locate the various connectors, controls
and components of the computer. To remove the computer cover, refer to
“Removing the computer cover”.
4.1.1 Locating components and connectors
The following illustrations will help you to locate the various components and
connectors in your computer.
22 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Internal components
The following illustration shows the components inside your computer.
3
2
1
4
5
Heatsink and system fan
Optical disk drive and bay
Power supply
System board
Hard disk drive
User Guide 23
Download from Www.Somanuals.com. All Manuals Search And Download.
4.1.2 Identifying parts on the system board
The system board (sometimes called the planar or motherboard) is the main circuit
board in your computer. It provides basic computer functions and supports a
variety of devices that are factory-installed or that you can install later.
1
2
3
4
5
6
7
8
9
20 19 18 17 16 15 14
13
12 11 10
12V power connector
Microprocessor fan header
Thermal sensor header
Battery
Microprocessor and heat sink
Memory slots (2)
Power connector
SATA connectors (3)
Power fan header
eSATA connector
Front panel connector
Front USB connectors (2)
Mode switch connector
Clear CMOS jumper
Mini PCI-E slot
Serial (COM2) connector
24 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
PCI express X 1 adapter slots (3)
PCI express X 16 adapter slot
Front audio connector
System fan header
4.2 Replacing hardware
Attention: Do not remove the computer cover or attempt any repair
before reading the “Important safety information” in the Safety and
Warranty Guide that was included with your computer or in the Hardware
Maintenance Manual (HMM) for the computer. To obtain copies of the
Safety and Warranty Guide or HMM, go to the Support Web site at
Note: Use only parts provided by Lenovo.
4.2.1 General information
Pre-disassembly instructions
Before proceeding with the disassembly procedure, make sure that you do the following:
1. Turn off the power to the system and all peripherals.
2. Unplug all power and signal cables from the computer.
3. Place the system on a flat, stable surface.
4.2.2 Removing the computer cover
Attention: Turn off the computer and wait 3 to 5 minutes to let it cool
down before removing the cover.
To remove the computer cover:
1. Remove any media (disks, CDs, or memory cards) from the drives, shut down
your operating system, and turn off the computer and all attached devices.
2. Unplug all power cords from electrical outlets.
3. Disconnect all cables attached to the computer. This includes power cords,
input/output (I/O) cables, and any other cables that are connected to the
computer. Refer to “Locating connectors on the rear of the computer”.
4. Remove the 2 screws that secure the computer cover at the rear of the
chassis.
User Guide 25
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Slide the computer cover toward the rear of the chassis to remove.
Note: For this procedure, it helps to lay the computer on a flat, stable
surface.
26 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2.3 Removing the front bezel
To remove the front bezel:
1. Remove the computer cover. Refer to “Removing the computer cover”.
Note: For this procedure, it helps to lay the computer on a flat, stable
surface.
2. Remove the front bezel by releasing the three plastic tabs inside the chassis
and pushing the bezel outward as shown.
3. To reattach the bezel, align the plastic tabs on the bottom of the bezel with the
corresponding holes in the chassis, and then snap it into position at the bottom
and top of the chassis.
4. Refer to “Completing the installation”.
User Guide 27
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2.4 Replacing an optical drive
Attention: Do not remove the computer cover or attempt any repair
before reading the “Important safety information” in the Safety and
Warranty Guide that was included with your computer or in the Hardware
Maintenance Manual (HMM) for the computer. To obtain copies of the
Safety and Warranty Guide or HMM, go to the Support Web site at
To replace an optical drive
1. Remove the computer cover. Refer to “Removing the computer cover”.
2. Remove the front bezel. Refer to “Removing the front bezel”.
3. Remove the 2 screws that secure the optical disk drive bay to the chassis.
4. Slide out the optical disk drive bay, then lift it up.
2
1
28 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Disconnect the data and power cables from the rear of the optical drive.
6. Remove the 2 screws that secure the optical drive to the optical drive bay
and push the optical drive straight out of the front of the drive bay.
5
3
4
7. Slide the new optical drive into the bay from the front, then attach it to the drive
bay with the screws.
8. Connect the data and power cables to the new optical drive.
9. Slide the optical disk drive bay back, then push it in and and reattach it to the
chassis with the screws.
10. Reattach the front bezel. Refer to “Removing the front bezel”.
11. Refer to “Completing the installation”.
User Guide 29
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2.5 Replacing the hard disk drive
Attention: Do not remove the computer cover or attempt any repair
before reading the “Important safety information” in the Safety and
Warranty Guide that was included with your computer or in the Hardware
Maintenance Manual (HMM) for the computer. To obtain copies of the
Safety and Warranty Guide or HMM, go to the Support Web site at
To replace the hard disk drive
1. Remove the computer cover. Refer to “Removing the computer cover”.
2. Remove the front bezel. Refer to “Removing the front bezel”.
3. Remove the optical disk drive bay. Refer to “Replacing an optical drive”.
4. Remove the screw that secures the hard disk drive bay to the chassis.
5. Slide out the hard disk drive bay, then lift it up. Disconnect the data and power
cables from the hard disk drive.
4
2
3
1
30 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Remove the 4 screws that secure the hard disk drive to the bay.
7. Slide the hard disk drive out of the bay.
8. Install the new hard disk drive.
(1) Insert the new hard disk drive into the drive bay.
(2) Screw back the 4 screws on the drive bay.
9. Attach the data and power cables to the new hard disk drive.
10. Line up the hard disk drive bay, then slide it in. Reattach it to the chassis with
the screws.
11. Reattach the optical drive disk bay. Refer to “Replacing an optical drive”
12. Reattach the front bezel. Refer to “Removing the front bezel”.
13. Refer to “Completing the installation”.
4.2.6 Replacing a memory module
Attention: Do not remove the computer cover or attempt any repair
before reading the “Important safety information” in the Safety and
Warranty Guide that was included with your computer or in the Hardware
Maintenance Manual (HMM) for the computer. To obtain copies of the
Safety and Warranty Guide or HMM, go to the Support Web site at
User Guide 31
Download from Www.Somanuals.com. All Manuals Search And Download.
To replace a memory module:
1. Remove the computer cover. Refer to “Removing the computer cover”.
Note: For this procedure, it helps to lay the computer on a flat, stable
surface.
2. Locate the memory module connectors. Refer to “Locating components”.
3. Remove the memory module being replaced by opening the retaining clips as
shown.
4. Position the new memory module over the memory connector. Make sure
the notch
key on the system board. Push the memory module straight down into the
connector until the retaining clips close.
on the memory module is correctly aligned with the connector
5. Refer to “Completing the installation”.
32 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2.7 Replacing the keyboard and the mouse
To replace the keyboard:
1. Remove any media (disks, CDs, or memory cards) from the drives, shut down
your operating system, and turn off the computer and all attached devices.
2. Unplug all power cords from electrical outlets.
3. Locate the connector for the keyboard. Refer to “Locating connectors on the
rear of the computer” and “Locating connectors on the front of the computer”.
Note: Your keyboard will be connected to the USB connector at either the
front or the rear of the computer.
4. Disconnect the failing keyboard cable from the computer and connect the new
keyboard cable to the same connector.
5. The mouse can be replaced using the same method.
4.2.8 Completing the installation
After replacing the parts, you need to close the computer cover and reconnect
cables, including telephone lines and power cords. Also, depending on the part
that was replaced, you might need to confirm the updated information in the Setup
Utility program. Refer to “Starting the Setup Utility” in the Hardware Maintenance
Manual.
To complete the part installation:
1. Ensure that all components have been reassembled correctly and that no tools
or loose screws are left inside your computer. Refer to “Locating components”,
“Front view of the chassis” and “Rear view of the chassis” for the location of the
various components.
2. Make sure that the cables are routed correctly before replacing the computer
cover.
User Guide 33
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Position the computer cover on the chassis so that the rail guides on the
bottom of the computer cover engage the rails. Then, push the computer cover
closed until it snaps into position. Screw back the 2 screws on the chassis.
4. Reconnect the external cables and power cords to the computer. Refer to
“Locating connectors on the front of the computer” and “Locating connectors
on the rear of the computer”.
Note: In most areas of the world, Lenovo requires the return of the
defective CRU. Information about this will come with the CRU or will come
a few days after the CRU arrives.
34 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix.
Declaration
Thank you for using Lenovo products.
Carefully read all documents shipped with your computer before you install and
use the product for the first time. Lenovo is not responsible for any loss except
when caused by installation and operations performed by Lenovo professional
service personnel. You are responsible if you fail to operate the product according
to instructions and requirements in the manuals included with your computer, or
operate the product inappropriately.
This manual could include technical inaccuracies or typographical errors. Changes
are made periodically to the information herein; these changes will be incorporated
in new editions of the publication.To provide better service, Lenovo reserves the
right to improve and/or modify the products and software programs described in
the manuals included with your computer, and the content of the manual, at any
time without additional notice.
The manuals included with your computer are provided to help you use Lenovo’s
products appropriately. For the configuration of the product, refer to the related
contract (if any) or product packing list, or consult the distributor for the product
sales.
The content of the manuals included with your computer is protected by copyright
laws and rules. None of the manuals included with your computer may be
reproduced or transcribed by any means or translated into any language without
prior written permission of Lenovo.
The software interface and function and hardware configuration described in
the manuals included with your computer might not match exactly the actual
configuration of the computer that you purchase.You are welcome to contact us
about the manuals included with your computer. For the latest information or any
questions or comments, contact or visit the Lenovo Web site:
User Guide 35
Download from Www.Somanuals.com. All Manuals Search And Download.
Trademarks
Lenovo and the Lenovo logo, IdeaCentre and IdeaCentre logo are trademarks of
Lenovo in the United States, other countries, or both.
Microsoft, Windows, and Windows Vista are trademarks of the Microsoft group of
companies.
Intel Inside is a trademark of Intel Corporation in the U.S. and/or other countries.
AMD, the AMD Arrow logo, ATI, AMD Athlon, AMD LIVE!, AMD Opteron, AMD
Phenom, AMD Sempron, Catalyst, Cool ‘n’ Quiet, CrossFire, PowerPlay, Radeon,
and The Ultimate Visual Experience are trademarks of Advanced Micro Devices,
Inc.
Other company, product, or service names referred to herein or in other Lenovo
publications may be trademarks or service marks of others.
All rights reserved.
Names or marks of certain companies mentioned in the manuals included with
your computer or this document do not necessarily indicate that related software
or hardware is included. The actual configuration of the product depends on the
packing list description.
36 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Energy Star Statement
ENERGY STAR® is a joint program of the U.S. Environmental Protection Agency
and the U.S. Department of Energy aimed at saving money and protecting the
environment through energy efficient products and practices.
Lenovo is proud to offer our customers products with an ENERGY STAR compliant
designation. The following machine types have been designed and tested to
conform to the ENERGY STAR program requirement for computers at the time
of manufacture. For more information about ENERGY STAR ratings for Lenovo
• 4746
By using ENERGY STAR compliant products and taking advantage of the power-
management features of your computer, you reduce the consumption of electricity.
Reduced electrical consumption contributes to potential financial sayings, a cleaner
environment, and the reduction of greenhouse gas emissions.
Lenovo encourages you to make efficient use of energy an integral part of your
day-to-day operations. To help in this endeavor, Lenovo has preset the following
power-management features to take effect when your computer has been inactive
for a specified duration:
ENERGY STAR power-management features, by operating system.
Microsoft Windows XP
Microsoft Windows Vista and Windows 7
• Turn off monitor: After
Power plan: Balanced
15 minutes
• Turn off the display: After 10 minutes
• Turn off hard disk drives: Never • Put the computer to sleep: After
• System standby: After
20 minutes
25 minutes
• Advanced power settings:
• System hibernates: Never
-
-
Turn off hard disk drives: After
20 minutes
Hibernate: Never
To awaken your computer from a Sleep or System Standby mode, press any
key on your keyboard. For more information about these settings, refer to your
Windows Help and Support information system.
User Guide 37
Download from Www.Somanuals.com. All Manuals Search And Download.
38 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
|
