ThinkCentre
User Guide
Machine Types:
0806, 0810, 0821, 0823, 0827, 0829, 0832, 0835,
0842, 0844, 0846, 0848, 0851, and 4089
Download from Www.Somanuals.com. All Manuals Search And Download.
ThinkCentre
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Before using this information and the product it supports, be sure to read and understand the ThinkCentre Safety and
First Edition (August 2010)
© Copyright Lenovo 2010.
LENOVO products, data, computer software, and services have been developed exclusively at private expense and
are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted
rights to use, reproduction and disclosure.
LIMITED AND RESTRICTED RIGHTS NOTICE: If products, data, computer software, or services are delivered
pursuant a General Services Administration ″GSA″ contract, use, reproduction, or disclosure is subject to restrictions
set forth in Contract No. GS-35F-05925.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
© Copyright Lenovo 2010
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Important safety information
CAUTION:
Before using this manual, be sure to read and understand all the related safety
information for this product. Refer to the ThinkCentre Safety and Warranty Guide
that you received with this product for the latest safety information. Reading
and understanding this safety information reduces the risk of personal injury
and or damage to your product.
If you no longer have a copy of the ThinkCentre Safety and Warranty Guide, you can
obtain a Portable Document Format (PDF) version from the Lenovo® Support Web
site at:
© Copyright Lenovo 2010
v
Download from Www.Somanuals.com. All Manuals Search And Download.
vi User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1. Product overview
This chapter provides information about the computer features, specifications,
preinstalled software programs, and locations of connectors, components, parts on
the system board, and internal drives.
This chapter contains the following topics:
computer.
software programs provided with your computer.
computer connectors, components, parts on the system board, and internal
drives.
Features
This section provides information about the computer features.
System information
The following information covers a variety of models. For information about
your specific model, use the Setup Utility program. See Chapter 4, “Using the
Microprocessor
Your computer comes with one of the following microprocessors (internal cache
size varies by model type):
v Intel® Celeron® microprocessor
v Intel Celeron dual-core microprocessor
v Intel Core™2 Duo microprocessor
v Intel Core 2 Quad microprocessor
v Intel Pentium® dual-core microprocessor
Memory module(s)
v Supports up to two double data rate 3 dual inline memory modules (DDR3
DIMMs)
Internal drives
v Card reader (available in some models)
v Optical drive
v Serial Advanced Technology Attachment (SATA) hard disk drive
Video subsystem
v Integrated graphics card functioning through a Video Graphics Array (VGA)
connector
© Copyright Lenovo 2010
1
Download from Www.Somanuals.com. All Manuals Search And Download.
v Peripheral Component Interconnect (PCI) Express x16 graphics card slot on the
system board for a discrete graphics card
Audio subsystem
v Integrated high-definition (HD) audio
v Headphone connector and microphone connector on the front panel
v Audio line-in connector, audio line-out connector, and microphone connector on
the rear panel
Connectivity
v 10/100/1000 Mbps integrated Ethernet controller
System management features
v Ability to store the power-on self-test (POST) hardware test results
v Advanced Configuration and Power Interface (ACPI)
v Automatic power-on startup
v Desktop Management Interface (DMI)
v Intel Trusted Execution Technology (Intel TXT)
v Preboot Execution Environment (PXE)
v System Management (SM) Basic Input/Output System (BIOS) and SM software
v Wake on LAN (WOL)
v Windows Management Instrumentation (WMI)
(WMI is the infrastructure for management data and operations on Windows
operating systems.)
Input/Output (I/O) features
v 9-pin serial port (one standard and one optional)
v Ethernet connector
v Six Universal Serial Bus (USB) connectors
(two USB connectors on the front panel and four USB connectors on the rear
panel)
v Three audio connectors on the rear panel
(audio line-in connector, audio line-out connector, and microphone connector)
v Two audio connectors on the front panel
(headphone connector and microphone connector)
v VGA monitor connector on the rear panel
For more information, refer to “Locating connectors, controls, and indicators on the
Expansion
v One optical drive bay
v One slim card reader drive bay
v One PCI Express x1 card slot
v One PCI Express x16 graphics card slot
v Two hard disk drive bays
v Two PCI card slots
2
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Power supply
Your computer comes with one of the following power supplies:
v 280-watt auto-sensing power supply
v 280-watt power supply with a manual voltage-selection switch
v 320-watt auto-sensing power supply
Security features
v A power-on password and an administrator password to deter unauthorized use
of your computer
v Computrace
v Cover presence switch (also called intrusion switch) (available in some models)
v Enabling or disabling SATA devices
v Enabling or disabling the serial port
v Enabling or disabling USB connectors
v Keyboard with fingerprint reader (shipped with some models)
v Startup sequence control
v Startup without keyboard or mouse
v Support for the addition of an integrated cable lock (Kensington lock. See
“Integrated cable lock” on page 39 for more information.)
information)
Preinstalled software programs
Your computer is preinstalled with some software programs to help you work
Preinstalled operating system
Your computer is preinstalled with one of the following operating systems:
v Microsoft® Windows® 7
v Microsoft Windows Vista®
v Microsoft Windows XP Professional
(preinstalled through downgrade rights in Windows 7 Professional or Windows
Vista Business)
Operating system(s), certified or tested for compatibility1 (varies by model type)
v Linux®
1. The operating system(s) listed here are being certified or tested for compatibility at the time this publication goes to press.
Additional operating systems might be identified by Lenovo as compatible with your computer following the publication of this
manual. This list is subject to change. To determine if an operating system has been certified or tested for compatibility, check the
Web site of the operating system vendor.
Chapter 1. Product overview
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
This section lists the physical specifications for your computer.
Dimensions
Width: 160 mm (6.3 inches)
Height: 388 mm (15.28 inches)
Depth: 422 mm (16.61 inches)
Weight
Maximum configuration as shipped: 9.4 kg (20.72 lbs)
Environment
Air temperature:
Operating: 10° to 35°C (50° to 95°F)
Non-operating: -40° to 60°C (-40° to 140°F)
Non-operating: -10° to 60°C (14° to 140°F) (without package)
Humidity:
Operating: 20% to 80% (non-condensing)
Non-operating: 20% to 90% (non-condensing)
Altitude:
Operating: -50 to 10 000 ft (-15.2 to 3 048 m)
Non-operating: -50 to 35 000 ft (-15.2 to 10 668 m)
Electrical input
Input voltage:
Low range:
Minimum: 100 V ac
Maximum: 127 V ac
Input frequency range: 50 to 60 Hz
Voltage-selection switch setting: 115 V ac
High range:
Minimum: 200 V ac
Maximum: 240 V ac
Input frequency range: 50 to 60 Hz
Voltage-selection switch setting: 230 V ac
Software overview
The computer comes with a preinstalled operating system and several preinstalled
applications.
Software provided with your Windows operating system
This section provides information about the software provided with your Windows
operating system.
Software provided by Lenovo
The following software programs are provided by Lenovo to help you improve
productivity and reduce the cost associated with maintaining your computer.
Software programs provided with your computer might vary depending on your
model type and preinstalled operating system.
4
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo ThinkVantage Tools: The Lenovo ThinkVantage® Tools program guides
you to a host of information sources and provides easy access to various tools to
Note: The Lenovo ThinkVantage Tools program is only available on computers
with the Windows 7 operating system from Lenovo.
ThinkVantage Productivity Center: The ThinkVantage Productivity Center
program guides you to a host of information sources and tools to help you set up,
understand, and maintain your computer, and enhance your computer
Note: The ThinkVantage Productivity Center program is only available on
computers preinstalled with the Windows Vista operating system or the
Windows XP operating system from Lenovo.
Lenovo Welcome: The Lenovo Welcome program introduces some innovative
built-in features of Lenovo to you and guides you through some important setup
tasks to help you make the most of your computer.
Note: The Lenovo Welcome program is only available on computers preinstalled
with the Windows 7 operating system or the Windows Vista operating
system from Lenovo.
Product Recovery: The Product Recovery program enables you to restore the
contents of the hard disk drive to the factory default settings.
ThinkVantage Rescue and Recovery: The ThinkVantage Rescue and Recovery®
(RnR) program is a one button recovery and restore solution that includes a set of
self-recovery tools to help you diagnose computer problems, get help, and recover
from system crashes, even if you cannot start the Windows operating system.
Password Manager: The Password Manager program automatically captures and
fills in authentication information for Windows applications and Web sites.
Note: The Password Manager program is only available on computers preinstalled
with the Windows 7 operating system from Lenovo.
ThinkVantage Client Security Solution: The ThinkVantage Client Security
Solution (CSS) program helps you protect your information, including vital
security information like passwords, encryption keys, and electronic credentials,
while guarding against unauthorized user access to data.
Note: The ThinkVantage Client Security Solution program is only available on
computers preinstalled with the Windows Vista operating system or the
Windows XP operating system from Lenovo.
Power Manager: The Power Manager program provides convenient, flexible, and
complete power management for your ThinkCentre® computer. By using the Power
Manager program, you can adjust your power settings to achieve the best balance
between system performance and power saving.
ThinkVantage System Update: The ThinkVantage System Update (TVSU)
program helps you keep the software on your computer up-to-date by
downloading and installing software packages (ThinkVantage applications, device
Chapter 1. Product overview
5
Download from Www.Somanuals.com. All Manuals Search And Download.
drivers, BIOS updates, and other third party applications). Some examples of
software that you should keep updated are programs provided by Lenovo, such as
the Rescue and Recovery program and the ThinkVantage Productivity Center
program.
Fingerprint Software: The integrated fingerprint reader provided on some
keyboards works with the Fingerprint Software program to enable you to enroll
your fingerprint and associate it with your Windows password. As a result,
fingerprint authentication can replace your password and enable simple and secure
user access. A fingerprint reader keyboard is available with certain computers or
can be purchased for computers that support this option.
Lenovo ThinkVantage Toolbox
The Lenovo ThinkVantage Toolbox program helps you maintain your computer,
improve computing security, diagnose computer problems, get familiar with the
innovative technologies provided by Lenovo, and get more information about your
PC-Doctor for Rescue and Recovery
The PC-Doctor for Rescue and Recovery diagnostic program is preinstalled on
your ThinkCentre computer as part of the Rescue and Recovery workspace to help
you diagnose hardware problems. It can also report operating-system-controlled
settings that interfere with the correct operation of your system. Use the PC-Doctor
for Rescue and Recovery diagnostic program if you are unable to start the
Windows operating system. For more information, see “PC-Doctor for Rescue and
Adobe Reader
The Adobe Reader program is a tool used to view, print, and search PDF
documents.
viewing the publications.
Antivirus software
Your computer comes with antivirus software that you can use to detect and
eliminate viruses. Lenovo provides a full version of antivirus software on your
computer with a free 30-day subscription. After 30 days, you must renew the
license to continue receiving the antivirus software updates.
For more information about how to use your antivirus software, refer to the help
system of your antivirus software.
6
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Locations
This section provides information to help you locate your computer connectors,
components, parts on the system board, and internal drives.
Locating connectors, controls, and indicators on the front of
your computer
Figure 1 shows the locations of the connectors, controls, and indicators on the front
of your computer.
Figure 1. Front connector, control, and indicator locations
ꢀ1ꢁ Hard disk drive activity indicator
ꢀ2ꢁ Power indicator
ꢀ3ꢁ Power switch
ꢀ5ꢁ USB connector
ꢀ6ꢁ Headphone connector
ꢀ7ꢁ Microphone connector
ꢀ8ꢁ USB connector
ꢀ4ꢁ Optical drive eject/close button
Chapter 1. Product overview
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Locating connectors and parts on the rear of your computer
Figure 2 shows the locations of the connectors and parts on the rear of your
computer. Some connectors on the rear of your computer are color-coded to help
you determine where to connect the cables on your computer.
Figure 2. Rear connector and part locations
ꢀ1ꢁ Voltage-selection switch (available on ꢀ8ꢁ Audio line-in connector
some models)
ꢀ2ꢁ Power cord connector
ꢀ3ꢁ Serial port
ꢀ9ꢁ PCI Express x16 graphics card slot
ꢀ10ꢁ PCI Express x1 card slot
ꢀ4ꢁ VGA monitor connector
ꢀ5ꢁ USB connectors (4)
ꢀ6ꢁ Microphone connector
ꢀ7ꢁ Audio line-out connector
ꢀ11ꢁ PCI card slots (2)
ꢀ12ꢁ Serial port (available on some models)
ꢀ13ꢁ Ethernet connector
ꢀ14ꢁ Personal System/2® (PS/2®) keyboard and
mouse connector (available on some models)
8
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Connector
Description
Audio line-in connector
Used to receive audio signals from an external audio device,
such as a stereo system. When you attach an external audio
device, a cable is connected between the audio line-out
connector of the device and the audio line-in connector of the
computer.
Audio line-out connector
Ethernet connector
Used to send audio signals from the computer to external
devices, such as powered stereo speakers (speakers with
built-in amplifiers), headphones, multimedia keyboards, the
audio line-in connector on a stereo system, or other external
recording devices.
Used to attach an Ethernet cable for a local area network
(LAN).
Note: To operate the computer within FCC Class B limits, use
a Category 5 Ethernet cable.
Microphone connector
Used to attach a microphone to your computer when you want
to record sound or if you use speech-recognition software.
PS/2 keyboard connector
Used to attach a keyboard that uses a PS/2 keyboard
(available on some models) connector.
PS/2 mouse connector
Used to attach a mouse, a trackball, or other pointing devices
(available on some models) that use a PS/2 mouse connector.
Serial port
Used to attach an external modem, a serial printer, or other
devices that use a 9-pin serial port.
USB connector
Used to attach a device that uses a USB connector, such as a
USB keyboard, a USB mouse, a USB scanner, or a USB printer.
If the USB connectors on your computer are not enough for
you to connect all your USB devices, you can purchase a USB
hub, which you can use to connect additional USB devices.
VGA monitor connector
Used to attach a VGA monitor or other devices that use a VGA
monitor connector.
Chapter 1. Product overview
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Locating components
Figure 3 shows the locations of the various components in your computer. To
remove the computer cover and gain access to the inside of the computer, see
Figure 3. Component locations
ꢀ1ꢁ Heat sink and fan assembly
ꢀ2ꢁ Memory modules (2)
ꢀ3ꢁ Front bezel
ꢀ5ꢁ System board
ꢀ6ꢁ Rear fan assembly
ꢀ7ꢁ Power supply assembly
ꢀ4ꢁ Optical drive
10 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Locating parts on the system board
Figure 4 shows the locations of the parts on the system board.
Figure 4. System board part locations
ꢀ1ꢁ Microprocessor
ꢀ2ꢁ Microprocessor fan connector
ꢀ3ꢁ Memory slots (2)
ꢀ4ꢁ Thermal sensor connector
ꢀ5ꢁ 24-pin power connector
ꢀ6ꢁ Parallel connector
ꢀ12ꢁ Front panel connector
ꢀ13ꢁ USB connectors (2)
ꢀ14ꢁ Serial (COM 2) connector
ꢀ15ꢁ Front audio connector
ꢀ16ꢁ Internal speaker connector
ꢀ17ꢁ PCI card slots (2)
ꢀ7ꢁ Battery
ꢀ18ꢁ PCI Express x1 card slot
ꢀ19ꢁ PCI Express x16 graphics card slot
ꢀ8ꢁ Cover presence switch connector
(Intrusion switch connector) (some models)
ꢀ9ꢁ SATA connectors (3)
ꢀ20ꢁ System fan connector
ꢀ10ꢁ Clear CMOS (Complementary Metal
Oxide Semiconductor) /Recovery jumper
ꢀ11ꢁ Power fan connector
ꢀ21ꢁ 4-pin power connector
ꢀ22ꢁ PS/2 keyboard and mouse connector
Locating internal drives
Internal drives are devices that your computer uses to read and store data. You can
add drives to your computer to increase storage capacity and enable your
computer to read other types of media. Internal drives are installed in bays. In this
manual, the bays are referred to as bay 1, bay 2, and so on.
When installing or replacing an internal drive, it is important to note the type and
size of the drive that you can install or replace in each bay and correctly connect
the cables to the drive installed. Refer to the appropriate section in Chapter 2,
“Installing or replacing hardware,” on page 13 for instructions on how to install or
replace internal drives for your computer.
Chapter 1. Product overview 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 5 shows the locations of the drive bays in your computer.
Figure 5. Drive bay locations
ꢀ1ꢁ Bay 1 - Optical drive bay (with an optical drive installed)
ꢀ2ꢁ Bay 2 - Slim card reader drive bay
ꢀ3ꢁ Bay 3 - Primary SATA hard disk drive bay (with a 3.5-inch SATA hard disk drive
installed)
ꢀ4ꢁ Bay 4 - Secondary SATA hard disk drive bay
12 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2. Installing or replacing hardware
This chapter provides instructions on how to install or replace hardware for your
computer.
This chapter contains the following topics:
Handling static-sensitive devices
Do not open the static-protective package containing the new part until the
defective part has been removed from the computer and you are ready to install
the new part. Static electricity, although harmless to you, can seriously damage
computer components and parts.
When you handle computer parts and components, take these precautions to avoid
static-electricity damage:
v Limit your movement. Movement can cause static electricity to build up around
you.
v Always carefully handle the parts and other computer components. Handle PCI
cards, memory modules, system boards, and microprocessors by the edges.
Never touch exposed circuitry.
v Prevent others from touching the parts and other computer components.
v Before you replace a new part, touch the static-protective package containing the
new part to a metal expansion-slot cover or other unpainted metal surface on
the computer for at least two seconds. This reduces static electricity from the
package and your body.
v Remove the new part from the static-protective package and directly install it in
the computer without placing it on any other surface. If it is hard for you to do
this in your specific situation, place the static-protective package of the new part
on a smooth, level surface, and then place the new part on the static-protective
package.
v Do not place the part on the computer cover or other metal surface.
Installing or replacing hardware
This section provides instructions on how to install or replace hardware for your
computer. You can expand the capabilities of your computer by adding memory
modules, PCI cards, or drives, and maintain your computer by replacing the failing
hardware.
Notes:
1. Use only computer parts provided by Lenovo.
2. When installing or replacing an option, use the appropriate instructions in this
section along with the instructions that come with the option.
© Copyright Lenovo 2010
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing external options
You can install external options to your computer, such as external speakers, a
printer, or a scanner. For some external options, you must install additional
software in addition to making the physical connection. When you install an
external option, see “Locating connectors, controls, and indicators on the front of
computer” on page 8 to identify the required connector. Then, use the instructions
that come with the option to help you make the connection and install software or
device drivers that are required for the option.
Removing the computer cover
Attention
Do not open your computer or attempt any repair before reading and understanding the
“Important safety information” in the ThinkCentre Safety and Warranty Guide that came with
your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to:
This section provides instructions on how to remove the computer cover.
CAUTION:
Turn off the computer and wait three to five minutes to let the computer cool
before removing the computer cover.
To remove the computer cover, do the following:
1. Remove all media from the drives. Then, turn off all attached devices and the
computer.
2. Disconnect all power cords from electrical outlets.
3. Disconnect the power cord, Input/Output (I/O) cables, and all other cables that
are connected to the computer.
4. Remove any locking device that secures the computer cover, such as an
14 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Remove the two screws that secure the computer cover and slide the computer
cover to the rear to remove it.
Figure 6. Removing the computer cover
Removing and reinstalling the front bezel
Attention
Do not open your computer or attempt any repair before reading and understanding the
“Important safety information” in the ThinkCentre Safety and Warranty Guide that came with
your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to:
This section provides instructions on how to remove and reinstall the front bezel.
To remove and reinstall the front bezel, do the following:
1. Remove all media from the drives and turn off all attached devices and the
computer. Then, disconnect all power cords from electrical outlets and
disconnect all cables that are connected to the computer.
Chapter 2. Installing or replacing hardware 15
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Remove the front bezel by releasing the three plastic tabs on the left side and
pivoting the front bezel outward.
Figure 7. Removing the front bezel
4. To reinstall the front bezel, align the other three plastic tabs on the right side of
the front bezel with the corresponding holes in the chassis, then pivot the front
bezel inward until it snaps into position on the left side.
Figure 8. Reinstalling the front bezel
16 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing or replacing a PCI card
Attention
Do not open your computer or attempt any repair before reading and understanding the
“Important safety information” in the ThinkCentre Safety and Warranty Guide that came with
your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to:
This section provides instructions on how to install or replace a PCI card.
Your computer has one standard PCI card slot, two PCI Express x1 card slots, and
one PCI Express x16 graphics card slot. See “Locating parts on the system board”
To install or replace a PCI card, do the following:
1. Remove all media from the drives and turn off all attached devices and the
computer. Then, disconnect all power cords from electrical outlets and
disconnect all cables that are connected to the computer.
3. At the rear of the computer, remove the screw that secures the PCI card latch.
Figure 9. Removing the screw that secures the PCI card latch
Chapter 2. Installing or replacing hardware 17
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Do one of the following:
v If you are replacing a PCI card, open the PCI card latch and remove the old
PCI card that is currently installed as shown in Figure 10.
Note: If the PCI card is secured in place by a retaining latch ꢀ1ꢁ, press the
retaining latch to release the PCI card from the latch. Then, grasp the
PCI card by the edges and carefully pull it out of the slot. If necessary,
alternate moving each side of the PCI card a small and equal amount
until it is completely removed from the PCI card slot.
Figure 10. Removing the PCI card
v If you are installing a PCI card, open the PCI card latch and remove the
appropriate PCI card slot cover. See “Locating parts on the system board” on
page 11 to identify the types of PCI card slots.
5. Remove the new PCI card from its static-protective package.
18 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Install the new PCI card into the appropriate PCI card slot on the system
board. Then, pivot the PCI card latch to the closed position to secure the PCI
cards.
Figure 11. Installing the PCI card
7. Reinstall the screw to secure the PCI card latch in place.
What to do next:
v To work with another piece of hardware, go to the appropriate section.
Installing or replacing a memory module
Attention
Do not open your computer or attempt any repair before reading and understanding the
“Important safety information” in the ThinkCentre Safety and Warranty Guide that came with
your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to:
This section provides instructions on how to install or replace a memory module.
Your computer has two memory slots for installing or replacing DDR3 SDRAM
DIMMs that provide up to a maximum of 4 GB of system memory. When
installing or replacing a memory module, use 1 GB or 2 GB DDR3 SDRAM DIMMs
in any combination up to a maximum of 4 GB of system memory.
Chapter 2. Installing or replacing hardware 19
Download from Www.Somanuals.com. All Manuals Search And Download.
To install or replace a memory module, do the following:
1. Remove all media from the drives and turn off all attached devices and the
computer. Then, disconnect all power cords from electrical outlets and
disconnect all cables that are connected to the computer.
3. Lay the computer on its side for easier access to the system board.
5. Remove any parts and disconnect any cables that might prevent your access to
the memory slots.
6. Do one of the following:
v If you are replacing a memory module, open the retaining clips and remove
the old memory module that is currently installed.
Figure 12. Removing the memory module
v If you are installing a memory module, open the retaining clips of the
memory slot into which you want to install the memory module.
Figure 13. Opening the retaining clips of the memory slot
20 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Position the new memory module over the memory slot. Make sure that the
notch ꢀ1ꢁ on the new memory module is aligned with the key ꢀ2ꢁ in the
memory slot. Then, press the new memory module straight down into the
memory slot until the retaining clips close and the new memory module snaps
into position.
Figure 14. Installing the memory module
8. Reinstall any parts and reconnect any cables that have been removed or
disconnected.
What to do next:
v To work with another piece of hardware, go to the appropriate section.
Replacing the battery
Attention
Do not open your computer or attempt any repair before reading and understanding the
“Important safety information” in the ThinkCentre Safety and Warranty Guide that came with
your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to:
Your computer has a special type of memory that maintains the date, time, and
configuration information for built-in features. The battery keeps this information
active when you turn off the computer.
The battery normally requires no charging or maintenance throughout its life;
however, no battery lasts forever. If the battery fails, the date, time, and
configuration information, including passwords, are lost. An error message is
displayed when you turn on the computer.
Before performing the following procedure, be sure to read and understand the
information about replacing and disposing of the battery in the “Batteries” and
“Lithium battery notice” sections of the ThinkCentre Safety and Warranty Guide.
Chapter 2. Installing or replacing hardware 21
Download from Www.Somanuals.com. All Manuals Search And Download.
To replace the battery, do the following:
1. Remove all media from the drives and turn off all attached devices and the
computer. Then, disconnect all power cords from electrical outlets and
disconnect all cables that are connected to the computer.
4. Remove any parts and disconnect any cables that might prevent your access
to the battery.
5. Remove the old battery.
Figure 15. Removing the old battery
6. Install the new battery.
Figure 16. Installing the new battery
7. Reinstall any parts and reconnect any cables that have been removed or
disconnected.
8. Reinstall the computer cover and reconnect all external cables. See
9. Turn on the computer and all attached devices.
Note: When the computer is turned on for the first time after replacing the
battery, an error message might be displayed. This is normal after
replacing the battery.
10. Use the Setup Utility program to set the date, time, passwords, and any other
configuration information. See Chapter 4, “Using the Setup Utility program,”
What to do next:
v To work with another piece of hardware, go to the appropriate section.
22 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the power supply assembly
Attention
Do not open your computer or attempt any repair before reading and understanding the
“Important safety information” in the ThinkCentre Safety and Warranty Guide that came with
your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to:
This section provides instructions on how to replace the power supply assembly.
Although there are no moving parts in your computer after the power cord has
been disconnected, the following warnings are required for your safety and proper
Underwriters Laboratories (UL) certification.
DANGER
Hazardous moving parts. Keep fingers and other body parts away.
CAUTION:
Never remove the cover on a power supply or any part that has the following
label attached.
Hazardous voltage, current, and energy levels are present inside any component
that has this label attached. There are no serviceable parts inside these
components. If you suspect a problem with one of these parts, contact a service
technician.
To replace the power supply assembly, do the following:
1. Remove all media from the drives and turn off all attached devices and the
computer. Then, disconnect all power cords from electrical outlets and
disconnect all cables that are connected to the computer.
3. Disconnect the power supply assembly cables from all drives and from the
24-pin power connector and 4-pin power connector on the system board. See
Note: You might also need to release the power supply assembly cables from
some cable clips or ties that secure the cables to the chassis.
Chapter 2. Installing or replacing hardware 23
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Lay the computer on its side and remove the four screws that secure the power
supply assembly. Then, slide the power supply assembly to the front of the
chassis.
Figure 17. Removing the power supply assembly screws
5. Pivot the power supply assembly as shown and then lift the power supply
assembly to remove it from the chassis.
Figure 18. Removing the power supply assembly
6. Make sure that the new power supply assembly is the correct replacement.
Some power supply assemblies automatically sense the voltage, some power
supply assemblies are voltage specific, and some power supply assemblies have
a voltage-selection switch. If your power supply assembly has a
voltage-selection switch, make sure that you set the voltage-selection switch to
match the voltage available at your electrical outlet. If necessary, use a ballpoint
pen to slide the voltage-selection switch to the correct position.
v If the voltage supply range in your local country or region is 100–127 V ac,
set the voltage-selection switch to 115 V.
24 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
v If the voltage supply range in your local country or region is 200–240 V ac,
set the voltage-selection switch to 230 V.
7. Install the new power supply assembly into the chassis so that the screw holes
in the new power supply assembly are aligned with the corresponding holes in
the rear of the chassis.
8. Install the four screws to secure the new power supply assembly in place.
Note: Use only screws provided by Lenovo.
9. Connect the new power supply assembly cables to all drives and the system
What to do next:
v To work with another piece of hardware, go to the appropriate section.
Replacing the heat sink and fan assembly
Attention
Do not open your computer or attempt any repair before reading and understanding the
“Important safety information” in the ThinkCentre Safety and Warranty Guide that came with
your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to:
This section provides instructions on how to replace the heat sink and fan
assembly.
CAUTION:
The heat sink and fan assembly might be very hot. Turn off the computer and
wait three to five minutes to let the computer cool before removing the
computer cover.
To replace the heat sink and fan assembly, do the following:
1. Remove all media from the drives and turn off all attached devices and the
computer. Then, disconnect all power cords from electrical outlets and
disconnect all cables that are connected to the computer.
3. Lay the computer on its side for easier access to the system board.
5. Disconnect any cables that might prevent your access to the heat sink and fan
assembly.
6. Disconnect the heat sink and fan assembly cable from the microprocessor fan
connector on the system board. See “Locating parts on the system board” on
Chapter 2. Installing or replacing hardware 25
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Follow this sequence to remove the four screws that secure the heat sink and
fan assembly to the system board:
a. Partially remove screw ꢀ1ꢁ, then fully remove screw ꢀ2ꢁ, and then fully
remove screw ꢀ1ꢁ.
b. Partially remove screw ꢀ3ꢁ, then fully remove screw ꢀ4ꢁ, and then fully
remove screw ꢀ3ꢁ.
Note: Carefully remove the four screws from the system board to avoid any
possible damage to the system board. The four screws cannot be
removed from the heat sink and fan assembly.
Figure 19. Screws that secure the heat sink and fan assembly
8. Lift the heat sink and fan assembly off the system board.
Notes:
a. You might have to gently twist the heat sink and fan assembly to free it
from the microprocessor.
b. When handling the heat sink and fan assembly, do not touch the thermal
grease on the bottom of it.
9. Place the new heat sink and fan assembly on the system board so that the
four screws are aligned with the corresponding holes in the system board.
Make sure that you properly place the new heat sink and fan assembly so that
you can easily connect the new heat sink and fan assembly cable to the
microprocessor fan connector on the system board.
10. Follow this sequence to install the four screws to secure the new heat sink and
fan assembly:
a. Partially tighten screw ꢀ1ꢁ, then fully tighten screw ꢀ2ꢁ, and then fully
tighten screw ꢀ1ꢁ.
b. Partially tighten screw ꢀ3ꢁ, then fully tighten screw ꢀ4ꢁ, and then fully
tighten screw ꢀ3ꢁ.
26 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
11. Connect the new heat sink and fan assembly cable to the microprocessor fan
connector on the system board. See “Locating parts on the system board” on
12. Reconnect any cables that have been removed.
What to do next:
v To work with another piece of hardware, go to the appropriate section.
Replacing the microprocessor
Attention
Do not open your computer or attempt any repair before reading and understanding the
“Important safety information” in the ThinkCentre Safety and Warranty Guide that came with
your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to:
This section provides instructions on how to replace the microprocessor.
CAUTION:
The heat sink and microprocessor might be very hot. Turn off the computer and
wait three to five minutes to let the computer cool before removing the
computer cover.
To replace the microprocessor, do the following:
1. Remove all media from the drives and turn off all attached devices and the
computer. Then, disconnect all power cords from electrical outlets and
disconnect all cables that are connected to the computer.
3. Lay the computer on its side for easier access to the system board.
parts on the system board” on page 11. Then, remove any parts and
disconnect any cables that might prevent your access to the heat sink and fan
assembly.
6. Place the heat sink and fan assembly on its side so that the thermal grease on
the bottom of it does not get in contact with anything.
Chapter 2. Installing or replacing hardware 27
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Lift the small handle ꢀ3ꢁ and open the retainer ꢀ1ꢁ to access the
microprocessor ꢀ2ꢁ.
Figure 20. Accessing the microprocessor
8. Lift the microprocessor straight up and out of the microprocessor socket, as
shown in Figure 21 on page 29.
Notes:
a. Your microprocessor and socket might look different from the one
illustrated.
b. Note the orientation of the microprocessor in the socket. You can either
look for the small triangle ꢀ1ꢁ on one corner of the microprocessor or note
the orientation of the notches ꢀ2ꢁ on the microprocessor. This is important
when installing the new microprocessor on the system board.
c. Touch only the edges of the microprocessor. Do not touch the gold contacts
on the bottom.
28 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
d. Do not drop anything onto the microprocessor socket while it is exposed.
The socket pins must be kept as clean as possible.
Figure 21. Removing the microprocessor
9. Make sure that the small handle is in the raised position.
10. Remove the new microprocessor ꢀ1ꢁ from the protective cover ꢀ2ꢁ that
protects the gold contacts of the new microprocessor.
11. Hold the new microprocessor by the edges and align the notches on it with
the tabs in the microprocessor socket, or align the small triangle on one corner
of the microprocessor with the corresponding beveled corner of the
microprocessor socket.
12. Lower the new microprocessor straight down into the microprocessor socket
on the system board.
13. Close the microprocessor retainer and lock it into position with the small
handle to secure the new microprocessor in the socket.
15. Reinstall any parts and reconnect any cables that have been removed or
disconnected.
Chapter 2. Installing or replacing hardware 29
Download from Www.Somanuals.com. All Manuals Search And Download.
What to do next:
v To work with another piece of hardware, go to the appropriate section.
Replacing the optical drive
Attention
Do not open your computer or attempt any repair before reading and understanding the
“Important safety information” in the ThinkCentre Safety and Warranty Guide that came with
your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to:
This section provides instructions on how to replace the optical drive.
To replace the optical drive, do the following:
1. Remove all media from the drives and turn off all attached devices and the
computer. Then, disconnect all power cords from electrical outlets and
disconnect all cables that are connected to the computer.
4. Disconnect the signal cable and the power cable from the rear of the optical
drive.
5. Remove the three screws that secure the optical drive. Then, slide the optical
drive out of the front of the computer.
Figure 22. Removing the optical drive
6. Slide the new optical drive into the drive bay from the front and align the
screw holes in the new optical drive with the corresponding holes in the drive
30 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
bay. Then, install the three screws to secure the new optical drive in place.
Figure 23. Installing the optical drive
7. Connect one end of the signal cable to the rear of the new optical drive and the
other end to an available SATA connector on the system board. See “Locating
parts on the system board” on page 11. Then, locate an available five-wire
power connector and connect it to the rear of the new optical drive.
Figure 24. Connecting a SATA optical drive
What to do next:
v To work with another piece of hardware, go to the appropriate section.
Replacing the hard disk drive
Attention
Do not open your computer or attempt any repair before reading and understanding the
“Important safety information” in the ThinkCentre Safety and Warranty Guide that came with
your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to:
Chapter 2. Installing or replacing hardware 31
Download from Www.Somanuals.com. All Manuals Search And Download.
This section provides instructions on how to replace the hard disk drive.
To replace the hard disk drive, do the following:
1. Remove all media from the drives and turn off all attached devices and the
computer. Then, disconnect all power cords from electrical outlets and
disconnect all cables that are connected to the computer.
Note: There is also a secondary hard disk drive bay for you to purchase and
install a secondary hard disk drive by yourself. If you want to install a
secondary hard disk drive, use the same way of installing the primary
hard disk drive.
4. Disconnect the signal cable and the power cable from the rear of the hard disk
drive.
5. Remove the four screws that secure the hard disk drive. Then, slide the hard
disk drive out of the chassis.
Figure 25. Removing the hard disk drive
32 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Slide the new hard disk drive into the hard disk drive bay and align the screw
holes in the new hard disk drive with the corresponding holes in the drive bay.
Then, install the four screws to secure the new hard disk drive in place.
Figure 26. Installing the hard disk drive
7. Connect one end of the signal cable to the rear of the new hard disk drive and
the other end to an available SATA connector on the system board. See
“Locating parts on the system board” on page 11. Then, locate an available
five-wire power connector and connect it to the rear of the new hard disk
drive.
Figure 27. Connecting a SATA hard disk drive
What to do next:
v To work with another piece of hardware, go to the appropriate section.
Chapter 2. Installing or replacing hardware 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the front audio and USB assembly
Attention
Do not open your computer or attempt any repair before reading and understanding the
“Important safety information” in the ThinkCentre Safety and Warranty Guide that came with
your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to:
This section provides instructions on how to replace the front audio and USB
assembly.
To replace the front audio and USB assembly, do the following:
1. Remove all media from the drives and turn off all attached devices and the
computer. Then, disconnect all power cords from electrical outlets and
disconnect all cables that are connected to the computer.
4. Disconnect the front audio and USB assembly cables from the system board.
5. Note the front audio and USB assembly cable routing and remove the screw
that secures the front audio and USB assembly. Then, remove the front audio
and USB assembly from the chassis.
Figure 28. Removing the front audio and USB assembly
6. Route the cables of the new front audio and USB assembly through the hole
in the chassis.
7. Position the new front audio and USB assembly to the chassis so that the
screw hole in the new front audio and USB assembly is aligned with the
corresponding hole in the chassis.
8. Install the screw to secure the new front audio and USB assembly in place.
9. Connect the new front audio and USB assembly cables to the system board.
34 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
What to do next:
v To work with another piece of hardware, go to the appropriate section.
Replacing the rear fan assembly
Attention
Do not open your computer or attempt any repair before reading and understanding the
“Important safety information” in the ThinkCentre Safety and Warranty Guide that came with
your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to:
This section provides instructions on how to replace the rear fan assembly.
To replace the rear fan assembly, do the following:
1. Remove all media from the drives and turn off all attached devices and the
computer. Then, disconnect all power cords from electrical outlets and
disconnect all cables that are connected to the computer.
4. Disconnect the rear fan assembly cable from the system fan connector on the
system board. See “Locating parts on the system board” on page 11.
5. The rear fan assembly is attached to the chassis by four rubber mounts.
Carefully remove the four rubber mounts from the rear of the chassis by
breaking them or cutting them with scissors.
Figure 29. Removing the rear fan assembly
Chapter 2. Installing or replacing hardware 35
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Remove the rear fan assembly out of the chassis.
7. Install the new rear fan assembly by aligning the rubber mounts of the rear
fan assembly with the holes on the chassis and push the rubber mounts
through the holes.
8. Pull on the tips of the rubber mounts until the rear fan assembly is in place.
Figure 30. Replacing the rear fan assembly
9. Connect the rear fan assembly cable to the system fan connector on the system
board.
Replacing the USB keyboard or mouse
Attention
Do not open your computer or attempt any repair before reading and understanding the
“Important safety information” in the ThinkCentre Safety and Warranty Guide that came with
your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to:
This section provides instructions on how to replace the USB keyboard or mouse.
To replace the USB keyboard or mouse, do the following:
1. Remove all media from the drives and turn off all attached devices and the
computer. Then, disconnect all power cords from electrical outlets.
2. Disconnect the cable of the old USB keyboard or mouse from the computer.
36 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Connect the cable of the new USB keyboard or mouse to one of the USB
connectors on the computer. Depending on where you want to connect the new
USB keyboard or mouse, see “Locating connectors, controls, and indicators on
Figure 31. Connecting the USB keyboard or mouse
What to do next:
v To work with another piece of hardware, go to the appropriate section.
Completing the parts replacement
After completing the installation or replacement for all parts, you need to reinstall
the computer cover and reconnect cables.
To reinstall the computer cover and reconnect cables to your computer, do the
following:
1. Make sure that all components have been reassembled correctly and that no
tools or loose screws are left inside your computer. See “Locating components”
on page 10 for the locations of the various components in your computer.
3. Properly route the cables and keep them clear of the hinges and sides of the
computer chassis to avoid interference with closing the computer cover.
Chapter 2. Installing or replacing hardware 37
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Position the computer cover on the chassis so that the rail guides on the bottom
of the computer cover engage the rails. Then, slide the computer cover to the
front of the computer until it snaps into position and is closed. Then, install the
two screws to secure the computer cover.
Figure 32. Reinstalling the computer cover
6. Reconnect the power cord and all other external cables to the computer. For
connector locations, see “Locating connectors, controls, and indicators on the
7. Depending on the parts you installed or replaced, you might need to confirm
the updated information in the Setup Utility program. See Chapter 4, “Using
Note: In most areas of the world, Lenovo requires the return of the defective
Customer Replaceable Units (CRUs). Information about this will come with
the new CRUs or will come a few days after you receive the new CRUs.
Obtaining device drivers
You can obtain device drivers for operating systems that are not preinstalled at
files with the device-driver files.
Basic security features
There are several security options available to help you prevent hardware theft and
unauthorized access to your computer. In addition to physical locks, you can also
prevent unauthorized use of your computer by a software lock that locks the
keyboard until a correct password is typed in.
38 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Integrated cable lock
An integrated cable lock, sometimes referred to as the Kensington lock, can be
used to secure your computer to a desk, table, or other non-permanent fixture. The
cable lock attaches to a security slot at the rear of your computer and is operated
same type of lock used with many notebook computers. You can order an
integrated cable lock from Lenovo by searching for Kensington at:
Note: Make sure that the integrated cable lock you installed does not interfere
with other computer cables.
Figure 33. Installing an integrated cable lock
Chapter 2. Installing or replacing hardware 39
Download from Www.Somanuals.com. All Manuals Search And Download.
Padlock
Your computer is equipped with a padlock loop so that the computer cover cannot
be removed when a padlock is installed.
Figure 34. Installing a padlock
Password protection
To deter unauthorized use of your computer, you can use the Setup Utility
program to set a password. When you turn on your computer, you are prompted
to type the password. The computer cannot be used until a valid password is
more information.
Erasing a lost or forgotten password (clearing CMOS)
This section provides instructions on how to erase a lost or forgotten password,
such as a user password.
To erase a lost or forgotten password, do the following:
1. Remove all media from the drives and turn off all attached devices and the
computer. Then, disconnect all power cords from electrical outlets and
disconnect all cables that are connected to the computer.
4. Remove any parts and disconnect any cables that might prevent your access
to the Clear CMOS /Recovery jumper.
5. Move the jumper from the standard position (pin 1 and pin 2) to the
maintenance position (pin 2 and pin 3).
40 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Reinstall any parts and reconnect any cables that have been removed or
disconnected.
7. Reinstall the computer cover and reconnect the power cords for the computer
and monitor. See “Completing the parts replacement” on page 37.
8. Turn on the computer and leave it on for approximately 10 seconds. Then,
turn off the computer by holding the power switch for approximately five
seconds.
9. Repeat step 1 through step 4.
10. Move the Clear CMOS /Recovery jumper back to the standard position (pin 1
and pin 2).
11. Reinstall any parts and reconnect any cables that have been removed or
disconnected.
13. Turn on the computer. Your password has been erased and you can use the
Setup Utility program to set a new password. See Chapter 4, “Using the Setup
Utility program,” on page 51 for more information.
Chapter 2. Installing or replacing hardware 41
Download from Www.Somanuals.com. All Manuals Search And Download.
42 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3. Recovery information
This chapter provides information about the recovery solutions provided by
Lenovo.
This chapter contains the following topics:
Notes:
1. There are a variety of methods to choose from when considering how to
recover in the event of a software- or hardware-related problem. Some methods
vary depending on the type of your operating system.
2. The product on the recovery media may be used only for the following
purposes:
v Restore the product preinstalled on your computer
v Reinstall the product
v Modify the product using the Additional Files
Creating and using recovery media
You can use recovery media to restore the hard disk drive to the factory default
settings. Recovery media are useful if you transfer the computer to another area,
sell the computer, recycle the computer, or put the computer in an operational state
after all other methods of recovery have failed. As a precautionary measure, it is
important to create recovery media as early as possible.
Note: The recovery operations you can perform using recovery media vary
depending on the operating system from which the recovery media were
created. The recovery media might contain a boot medium and a data
medium. Your Microsoft Windows license permits you to create only one
data medium, so it is important that you store the recovery media in a safe
place after you have made them.
Creating recovery media
This section provides instructions on how to create recovery media on different
operating systems.
Note: On the Windows 7 operating system, you can create recovery media using
discs or external USB storage devices. On the Windows Vista and Windows
XP operating systems, you can create recovery media using only discs, so
this operation is also called ″creating Product Recovery discs.″
v To create recovery media on the Windows 7 operating system, click Start → All
Programs → Lenovo ThinkVantage Tools → Factory Recovery Disks. Then,
follow the instructions on the screen.
© Copyright Lenovo 2010
43
Download from Www.Somanuals.com. All Manuals Search And Download.
v To create Product Recovery discs on the Windows Vista operating system, click
Start → All Programs → ThinkVantage → Create Product Recovery Media. Then,
follow the instructions on the screen.
v To create Product Recovery discs on the Windows XP operating system, click
Start → All Programs → ThinkVantage → Create Recovery Media. Then, follow
the instructions on the screen.
Using recovery media
This section provides instructions on how to use recovery media on different
operating systems.
v On the Windows 7 operating system and the Windows Vista operating system,
you can use recovery media to restore the computer to the factory default
settings only. You can use recovery media to put the computer in an operational
state after all other methods of recovery have failed.
Attention: When you use recovery media to restore the computer to the factory
default settings, all the files currently on the hard disk drive will be deleted and
replaced by the factory default settings.
To use recovery media on the Windows 7 operating system or the Windows
Vista operating system, do the following:
1. Depending on the type of your recovery media, connect the boot medium
(memory key or other USB storage device) to the computer, or insert the boot
disc into the optical drive.
2. Repeatedly press and release the F12 key when turning on the computer.
When the Startup Device Menu opens, release the F12 key.
3. Select the desired startup device and press Enter. The restore process begins.
4. Follow the instructions on the screen to complete the operation.
Notes:
1. After restoring your computer to the factory default settings, you might have
to reinstall device drivers for some devices. See “Installing or reinstalling
2. Some computers come with Microsoft Office or Microsoft Works preinstalled.
If you need to recover or reinstall your Microsoft Office or Microsoft Works
applications, you must use the Microsoft Office CD or Microsoft Works CD.
These discs are provided only with computers preinstalled with Microsoft
Office or Microsoft Works.
v On the Windows XP operating system, you can use Product Recovery discs to
restore your computer to the factory default settings, perform a custom factory
recovery, or perform other rescue and recovery operations such as rescuing
individual files. You will be given the option to enter the Rescue and Recovery
workspace and choose from a variety of recovery operations.
Attention: When you use Product Recovery discs to restore the computer to
the factory default settings, all the files currently on the hard disk drive will be
deleted and replaced by the factory default settings. During the restore process,
you will be given the option to save one or more files currently on the hard disk
drive to other media before the data is deleted.
To use Product Recovery discs on the Windows XP operating system, do the
following:
1. Repeatedly press and release the F12 key when turning on the computer.
When the Startup Device Menu opens, release the F12 key.
2. Insert the boot disc into the optical drive.
44 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Select the optical drive with the boot disc as the startup device and press
Enter. After a short delay, the Rescue and Recovery workspace opens.
4. On the Rescue and Recovery menu, click Restore your system.
5. Follow the instructions on the screen. Insert the appropriate Product
Recovery disc when prompted.
Performing backup and recovery operations
The Rescue and Recovery program enables you to back up all your hard disk drive
contents including the operating system, data files, software programs, and
personal settings. You can designate where the Rescue and Recovery program
stores the backup:
v In a protected area of your hard disk drive
v On the secondary hard disk drive if a secondary hard disk drive is installed in
your computer
v On an attached external USB hard disk drive
v On a network drive
v On recordable discs (a recordable optical drive is required for this option)
After you have backed up the contents on the hard disk drive, you can restore the
complete contents of the hard disk drive, restore only the selected files, or restore
only the Windows operating system and applications.
Performing a backup operation
This section provides instructions on how to perform a backup operation using the
Rescue and Recovery program on different operating systems.
v To perform a backup operation using the Rescue and Recovery program on the
Windows 7 operating system, do the following:
1. From the Windows desktop, click Start → All Programs → Lenovo
ThinkVantage Tools → Enhanced Backup and Restore. The Rescue and
Recovery program opens.
2. In the Rescue and Recovery main window, click the Launch advanced
Rescue and Recovery arrow.
3. Click Back up your hard drive and select backup operation options. Then,
follow the instructions on the screen to complete the backup operation.
v To perform a backup operation using the Rescue and Recovery program on the
Windows Vista operating system or the Windows XP operating system, do the
following:
1. From the Windows desktop, click Start → All Programs → ThinkVantage →
Rescue and Recovery. The Rescue and Recovery program opens.
2. In the Rescue and Recovery main window, click Launch advanced Rescue
and Recovery → Back up your hard drive, and select backup operation
options.
3. Follow the instructions on the screen to complete the backup operation.
Performing a recovery operation
This section provides instructions on how to perform a recovery operation using
the Rescue and Recovery program on different operating systems.
v To perform a recovery operation using the Rescue and Recovery program on the
Windows 7 operating system, do the following:
Chapter 3. Recovery information 45
Download from Www.Somanuals.com. All Manuals Search And Download.
1. From the Windows desktop, click Start → All Programs → Lenovo
ThinkVantage Tools → Enhanced Backup and Restore. The Rescue and
Recovery program opens.
2. In the Rescue and Recovery main window, click the Launch advanced
Rescue and Recovery arrow.
3. Click the Restore your system from a backup icon.
4. Follow the instructions on the screen to complete the recovery operation.
v To perform a recovery operation using the Rescue and Recovery program on the
Windows Vista operating system or the Windows XP operating system, do the
following:
1. From the Windows desktop, click Start → All Programs → ThinkVantage →
Rescue and Recovery. The Rescue and Recovery program opens.
2. In the Rescue and Recovery main window, click Launch advanced Rescue
and Recovery.
3. Click the Restore your system from a backup icon.
4. Follow the instructions on the screen to complete the recovery operation.
For more information about performing a recovery operation from the Rescue and
Recovery workspace, see “Using the Rescue and Recovery workspace.”
Using the Rescue and Recovery workspace
The Rescue and Recovery workspace resides in a protected, hidden area of your
hard disk drive that operates independently from the Windows operating system.
This enables you to perform recovery operations even if you cannot start the
Windows operating system. You can perform the following recovery operations
from the Rescue and Recovery workspace:
v Rescue files from your hard disk drive or from a backup
The Rescue and Recovery workspace enables you to locate files on your hard
disk drive and transfer them to a network drive or other recordable media, such
as a USB device or a disc. This solution is available even if you did not back up
your files or if changes were made to the files since your last backup operation.
You can also rescue individual files from a Rescue and Recovery backup located
on your local hard disk drive, a USB device, or a network drive.
v Restore your hard disk drive from a Rescue and Recovery backup
If you have backed up your hard disk drive using the Rescue and Recovery
program, you can restore the hard disk drive from a Rescue and Recovery
backup, even if you cannot start the Windows operating system.
v Restore your hard disk drive to the factory default settings
The Rescue and Recovery workspace enables you to restore the complete
contents of your hard disk drive to the factory default settings. If you have
multiple partitions on your hard disk drive, you have the option to restore the
factory default settings to the C: partition and leave the other partitions intact.
Because the Rescue and Recovery workspace operates independently from the
Windows operating system, you can restore the factory default settings even if
you cannot start the Windows operating system.
46 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Attention: If you restore the hard disk drive from a Rescue and Recovery backup
or restore the hard disk drive to the factory default settings, all files on the
primary hard disk drive partition (usually drive C:) will be deleted in the recovery
process. If possible, make copies of important files. If you are unable to start the
Windows operating system, you can use the rescue files feature of the Rescue and
Recovery workspace to copy files from your hard disk drive to other media.
To start the Rescue and Recovery workspace, do the following:
1. Make sure the computer is turned off.
2. Repeatedly press and release the F11 key when turning on the computer. When
you hear beeps or see a logo screen, release the F11 key.
3. If you have set a Rescue and Recovery password, type your password when
prompted. The Rescue and Recovery workspace opens after a short delay.
4. Do one of the following:
v To rescue files from your hard disk drive or from a backup, click Rescue
files and follow the instructions on the screen.
v To restore your hard disk drive from a Rescue and Recovery backup or to
restore your hard disk drive to the factory default settings, click Restore your
system and follow the instructions on the screen.
For more information about the features of the Rescue and Recovery workspace,
click Help.
Notes:
1. After restoring your hard disk drive to the factory default settings, you might
have to reinstall device drivers for some devices. See “Installing or reinstalling
2. Some computers come with Microsoft Office or Microsoft Works preinstalled. If
you need to recover or reinstall your Microsoft Office or Microsoft Works
applications, you must use the Microsoft Office CD or Microsoft Works CD. These
discs are provided only with computers preinstalled with Microsoft Office or
Microsoft Works.
Creating and using a rescue medium
With a rescue medium, such as a disc or a USB hard disk drive, you can recover
the computer from failures that prevent you from gaining access to the Rescue and
Recovery workspace on your hard disk drive.
Notes:
1. The recovery operations you can perform using a rescue medium vary
depending on the operating system.
2. The rescue disc can be started in all types of optical drives.
3. You can also run the PC-Doctor for Rescue and Recovery diagnostic program,
after using a rescue medium to recover the computer from failures and gaining
access to the Rescue and Recovery workspace.
Creating a rescue medium
This section provides instructions on how to create a rescue medium on different
operating systems.
Chapter 3. Recovery information 47
Download from Www.Somanuals.com. All Manuals Search And Download.
v To create a rescue medium on the Windows 7 operating system, do the
following:
1. From the Windows desktop, click Start → All Programs → Lenovo
ThinkVantage Tools → Enhanced Backup and Restore. The Rescue and
Recovery program opens.
2. In the Rescue and Recovery main window, click the Launch advanced
Rescue and Recovery arrow.
3. Click the Create Rescue Media icon. The Create Rescue and Recovery Media
window opens.
4. In the Rescue Media area, select the type of the rescue medium you want to
create. You can create a rescue medium using a disc, a USB hard disk drive,
or a secondary internal hard disk drive.
5. Click OK and follow the instructions on the screen to create a rescue
medium.
v To create a rescue medium on the Windows Vista operating system or the
Windows XP operating system, do the following:
1. From the Windows desktop, click Start → All Programs → ThinkVantage →
Create Recovery Media. The Create Rescue and Recovery Media window
opens.
2. In the Rescue Media area, select the type of the rescue medium you want to
create. You can create a rescue medium using a disc, a USB hard disk drive,
or a secondary internal hard disk drive.
3. Click OK and follow the instructions on the screen to create a rescue
medium.
Using a rescue medium
This section provides instructions on how to use the rescue medium you have
created.
v If you have created a rescue medium using a disc, use the following instructions
to use the rescue medium:
1. Turn off your computer.
2. Repeatedly press and release the F12 key when turning on the computer.
When the Startup Device Menu opens, release the F12 key.
3. On the Startup Device Menu, select the desired optical drive as the first boot
device. Then, insert the rescue disc into the optical drive and press Enter. The
rescue medium starts.
v If you have created a rescue medium using a USB hard disk drive, use the
following instructions to use the rescue medium:
1. Attach the USB hard disk drive to one of the USB connectors on your
computer.
2. Repeatedly press and release the F12 key when turning on the computer.
When the Startup Device Menu opens, release the F12 key.
3. On the Startup Device Menu, select the USB hard disk drive as the first boot
device and press Enter. The rescue medium starts.
v If you have created a rescue medium using the secondary internal hard disk
drive, set the secondary internal hard disk drive as the first boot device in the
startup device sequence to start the rescue medium. See “Selecting a startup
Note: In your computer, there is a secondary hard disk drive bay for you to
install a secondary hard disk drive. You can purchase a secondary hard
48 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
disk drive by yourself. If you want to install a secondary hard disk drive,
When the rescue medium starts, the Rescue and Recovery workspace opens. The
help information for each feature is available from the Rescue and Recovery
workspace. Follow the instructions to complete the recovery process.
Installing or reinstalling device drivers
Before installing or reinstalling device drivers, make sure that you have a
preinstalled operating system and the documentation and software media for the
device.
Device drivers for factory-installed devices are located on the computer hard disk
drive (usually drive C:) in the SWTOOLS\DRIVERS subdirectory. The latest device
support. Other device drivers are on the software media that come with individual
devices.
To install or reinstall the device driver for a factory-installed device, do the
following:
1. Turn on the computer.
2. Use Windows Explorer or My Computer to display the directory structure of
your hard disk drive.
3. Go to the C:\SWTOOLS directory.
4. Open the DRIVERS folder. Within the DRIVERS folder, there are several
subfolders named for various devices installed in your computer, such as
AUDIO or VIDEO.
5. Open the appropriate device subfolder.
6. Do one of the following:
v In the device subfolder, look for a SETUP.exe file. Double-click the file and
follow the instructions on the screen to complete the installation.
v In the device subfolder, look for a README.txt file or a file with the .txt
extension. This file might be named after the operating system, such as
WIN98.txt. The TXT file contains information about how to install the device
driver. Follow the instructions to complete the installation.
v If the device subfolder contains a file with the .inf extension and you want to
install the device driver using the INF file, refer to your Windows Help and
Support information system for detailed information about how to install the
device driver.
Solving recovery problems
If you are unable to access the Rescue and Recovery workspace or the Windows
environment, do one of the following:
v Use recovery media if all other methods of recovery have failed and you need to
restore the hard disk drive to the factory default settings. See “Creating and
Note: If you are unable to access the Rescue and Recovery workspace or the
Windows environment from a rescue medium, a recovery repair diskette, or
Chapter 3. Recovery information 49
Download from Www.Somanuals.com. All Manuals Search And Download.
recovery media, you might not have the rescue device (an internal hard disk
drive, a disc, a USB hard disk drive, or other external devices) set as the
first boot device in the startup device sequence. You must first make sure
that your rescue device is set as the first boot device in the startup device
sequence in the Setup Utility program. See “Selecting a startup device” on
page 53 for detailed information about temporarily or permanently changing
the startup device sequence. For more information about the Setup Utility
It is important to create a rescue medium, a recovery repair diskette, and a set of
recovery media as early as possible and store them in a safe place for future use.
50 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4. Using the Setup Utility program
You can use the Setup Utility program to view and change the configuration
settings of your computer, regardless of which operating system you are using.
However, the operating system settings might override any similar settings in the
Setup Utility program.
This chapter provides information about the following topics to help you use the
Setup Utility program:
Starting the Setup Utility program
This section provides instructions on how to start the Setup Utility program.
To start the Setup Utility program, do the following:
1. Make sure your computer is turned off.
2. Repeatedly press and release the F1 key when turning on the computer. When
you hear multiple beeps or see a logo screen, release the F1 key. The Setup
Utility program opens.
Note: If a password has been set, the Setup Utility program menu will not be
displayed until you type the correct password. For more information, see
Viewing or changing settings
The Setup Utility program menu lists various items about the system configuration
settings. To view or change the settings, start the Setup Utility program. See
“Starting the Setup Utility program.” Then, follow the instructions on the screen.
When working with the Setup Utility program, you must use the keyboard. The
keys used to perform various tasks are displayed at the bottom of each screen.
Using passwords
By using the Setup Utility program, you can set a password to prevent
unauthorized access to your computer and data. The following options are
available to help you set a power-on password or an administrator password:
v Set Power-On Password
v Set Administrator Password
You do not have to set a password to use your computer. However, using a
password improves computing security. If you decide to set a password, read the
following sections.
© Copyright Lenovo 2010
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Password considerations
A password can be any combination of up to 16 (1 to 16) alphabetic and numeric
characters. For security reasons, it is recommended to use a strong password that
cannot be easily compromised. To set a strong password, use the following
guidelines:
Note: The Setup Utility program passwords are not case sensitive.
v Have at least eight characters in length
v Contain at least one alphabetic character and one numeric character
v Not be your name or your user name
v Not be a common word or a common name
v Be significantly different from your previous passwords
Power-on password
After you have set a power-on password using the Set Power-On Password
option, a password prompt is displayed each time you turn on the computer. You
cannot use the computer until a valid password is typed in. For more information
about how to set a password, see “Setting, changing, or deleting a password.”
Administrator password
The Set Administrator Password option enables you to set an administrator
password, which deters unauthorized users from changing configuration settings.
If you are responsible for maintaining the settings of several computers, you might
want to set an administrator password. For more information about how to set a
password, see “Setting, changing, or deleting a password.”
After you have set an administrator password, a password prompt is displayed
each time you try to access the Setup Utility program. You cannot access the Setup
Utility program until a valid password is typed in.
If you have set both a power-on password and an administrator password, you
can type either password to use your computer. However, to change any
configuration settings, you must use your administrator password.
Setting, changing, or deleting a password
This section provides instructions on how to set, change, or delete a password.
To set, change, or delete a password, do the following:
2. From the Setup Utility program main menu, select Security → Set Power-On
Password or Set Administrator Password.
3. Follow the instructions on the screen to set, change, or delete a password.
Note: A password can be any combination of up to 16 (1 to 16) alphabetic and
numeric characters. For more information, see “Password
52 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Enabling or disabling a device
This section provides instructions on how to enable or disable user access to a
device.
SATA Controller
When this option is set to Disabled, all devices connected to the
SATA connectors (such as the hard disk drive and the optical
drive) are disabled and will not be displayed in the system
configuration.
USB Setup
Use this option to set up USB connectors.
To enable or disable a device, do the following:
2. From the Setup Utility program main menu, select Devices.
3. Depending on the device you want to enable or disable, do one of the
following:
v Select ATA Drives Setup → SATA Controller to enable or disable the devices
connected to the SATA connectors on the system board.
v Select USB Setup and follow the instructions on the screen to enable or
disable the USB connector(s) of your choice.
4. Select the desired settings and press Enter.
5. Press Esc to return to the Setup Utility program main menu. You might have to
press Esc several times.
6. Press F10 to save the new settings and exit the Setup Utility program.
Notes:
a. If you do not want to save the new settings, select Exit → Discard Changes
and Exit.
b. If you want to return to the default settings, press F9 or select Exit → Load
Optimal Defaults.
Selecting a startup device
If your computer does not start up from a device (such as a hard disk drive or the
disc in an optical drive) as expected, do one of the following to select the desired
startup device.
Selecting a temporary startup device
This section provides instructions on how to select a temporary startup device. You
can use the instructions in this section to start up from any startup device.
Note: Not all discs and hard disk drives are bootable.
To select a temporary startup device, do the following:
1. Turn off your computer.
2. Repeatedly press and release the F12 key when turning on the computer. When
the Startup Device Menu opens, release the F12 key.
3. Select the desired startup device on the Startup Device Menu and press Enter.
Chapter 4. Using the Setup Utility program 53
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: Selecting a startup device on the Startup Device Menu does not
permanently change the startup device sequence.
Viewing or changing the startup device sequence
This section provides instructions on how to view or permanently change the
configured startup device sequence.
To view or permanently change the configured startup device sequence, do the
following:
2. Select Startup → Primary Boot Sequence. Read the information displayed on
the right side of the screen.
3. Select the first boot device, second boot device, and so on.
4. Press Esc to return to the Startup menu. Then, select the devices for the
Automatic Boot Sequence and Error Boot Sequence.
5. Press Esc to return to the Setup Utility program main menu. You might have to
press Esc several times.
6. Press F10 to save the new settings and exit the Setup Utility program.
Notes:
a. If you do not want to save the new settings, select Exit → Discard Changes
and Exit.
b. If you want to return to the default settings, press F9 or select Exit → Load
Optimal Defaults.
Exiting the Setup Utility program
After you finish viewing or changing settings, press Esc to return to the Setup
Utility program main menu. You might have to press Esc several times. Then, you
can do one of the following:
v If you want to save the new settings and exit the Setup Utility program, press
F10. Otherwise, your changes will not be saved.
v If you do not want to save the new settings, select Exit → Discard Changes and
Exit.
v If you want to return to the default settings, press F9 or select Exit → Load
Optimal Defaults.
54 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5. Updating system programs
This chapter provides information about updating the POST and BIOS, and how to
recover from a POST and BIOS update failure.
This chapter contains the following topics:
Using system programs
System programs are the basic layer of software built into your computer. System
programs include the POST, the BIOS, and the Setup Utility program. The POST is
a set of tests and procedures that are performed each time you turn on your
computer. The BIOS is a layer of software that translates instructions from other
layers of software into electrical signals that the computer hardware can execute.
You can use the Setup Utility program to view or change the configuration settings
of your computer. See Chapter 4, “Using the Setup Utility program,” on page 51
for detailed information.
Your computer system board has a module called electrically erasable
programmable read-only memory (EEPROM, also referred to as flash memory).
You can easily update the POST, the BIOS, and the Setup Utility program by
starting your computer with a system-program-update disc or running a special
update program from your operating system.
Lenovo might make changes and enhancements to the POST and BIOS. When
updates are released, they are available as downloadable files on the Lenovo Web
are available in a TXT file that is included with the update files. For most models,
you can download either an update program to create a system-program-update
disc or an update program that can be run from the operating system.
Updating (flashing) the BIOS from a disc
This section provides instructions on how to update (flash) the BIOS from a disc.
Note: You can download a self-starting bootable disc image (known as an ISO
image) with the system program updates to create a system-program-update
disc. Go to:
To update (flash) the BIOS from a disc, do the following:
1. Turn off your computer.
2. Repeatedly press and release the F12 key when turning on the computer. When
the Startup Device Menu opens, release the F12 key.
3. On the Startup Device Menu, select the desired optical drive as the startup
device. Then, insert the disc into this optical drive and press Enter. The update
begins.
© Copyright Lenovo 2010
55
Download from Www.Somanuals.com. All Manuals Search And Download.
4. When prompted to change the serial number, it is suggested that you do not
make this change by pressing N. However, if you do want to change the serial
number, press Y, then type in the serial number and press Enter.
5. When prompted to change the machine type and model, it is suggested that
you do not make this change by pressing N. However, if you do want to
change the machine type and model, press Y, then type in the machine type
and model and press Enter.
6. Follow the instructions on the screen to complete the update. After the update
is completed, remove the disc from the optical drive.
Updating (flashing) the BIOS from your operating system
Note: Because Lenovo makes constant improvements to its Web sites, the Web
page contents are subject to change without notice, including the contents
referenced in the following procedure.
To update (flash) the BIOS from your operating system, do the following:
2. Do the following to locate the downloadable files for your machine type:
a. In the Enter a product number field, type your machine type and click Go.
b. Click Downloads and drivers.
c. Select BIOS from the Refine results drop-down list box to easily locate all
the BIOS related links.
d. Click the BIOS update link.
3. Click the TXT file that contains the instructions for updating (flashing) the BIOS
from your operating system.
4. Print these instructions. This is very important because these instructions will
not be displayed on the screen after the download begins.
5. Follow the printed instructions to download, extract, and install the update.
Recovering from a POST and BIOS update failure
If the power to your computer is interrupted while the POST and BIOS is being
updated, your computer might not restart correctly. If this happens, perform the
following procedure, which is commonly called Boot-block Recovery.
1. Remove all media from the drives and turn off all attached devices and the
computer. Then, disconnect all power cords from electrical outlets and
disconnect all cables that are connected to the computer.
4. Remove any parts and disconnect any cables that might prevent your access
to the Clear CMOS /Recovery jumper.
5. Move the jumper from the standard position (pin 1 and pin 2) to the
maintenance position (pin 2 and pin 3).
6. Reinstall any parts and reconnect any cables that have been removed or
disconnected.
7. Reinstall the computer cover and reconnect the power cords for the computer
and monitor. See “Completing the parts replacement” on page 37.
56 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Turn on the computer and then insert the POST and BIOS update (flash
update) disc into the optical drive. The recovery session begins. The recovery
session will take two to three minutes. During this time, you will hear a series
of beeps.
9. After the recovery session is completed, there will be no video, the series of
beeps will end, and the system will automatically turn off.
10. Repeat step 1 through step 4.
11. Move the jumper back to the standard position (pin 1 and pin 2).
12. Reinstall any parts and reconnect any cables that have been removed or
disconnected.
13. Reinstall the computer cover and reconnect power cords and all other external
cables. See “Completing the parts replacement” on page 37.
14. Turn on the computer and remove the disc from the optical drive.
Chapter 5. Updating system programs 57
Download from Www.Somanuals.com. All Manuals Search And Download.
58 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6. Troubleshooting and diagnostic programs
This chapter provides information about some basic troubleshooting and diagnostic
programs. If your computer problem is not described in this chapter, see Chapter 7,
“Getting information, help, and service,” on page 63 for additional troubleshooting
resources.
This chapter contains the following topics:
Basic troubleshooting
The following table provides some basic information to help you troubleshoot your
computer problems.
Note: If you cannot solve the problem after doing the basic troubleshooting, have
the computer serviced. Refer to the ThinkCentre Safety and Warranty Guide
that came with your computer for the safety and warranty information and
the list of service and support telephone numbers. You can also get the latest
service and support telephone numbers and a PDF version of the
ThinkCentre Safety and Warranty Guide from the Lenovo Support Web site at:
Symptom
Action
The computer does not start
when you press the power
switch.
Verify that:
v The power cord is correctly connected to the rear of the computer and to a
working electrical outlet.
v The power indicator on the front of the computer is on.
v The computer voltage matches the voltage available at the electrical outlet for
your country or region.
The monitor screen is blank.
Verify that:
v The monitor signal cable is correctly connected to the monitor and to the
appropriate monitor connector on the computer. If your computer has a PCI
graphics card installed, be sure to use the monitor connector on the graphics
card rather than the integrated one on the system board.
v The monitor power cord is correctly connected to the monitor and to a
working electrical outlet.
v The monitor is turned on and the brightness and contrast controls are set
correctly.
v The computer voltage matches the voltage available at the electrical outlet for
your country or region.
The USB keyboard or mouse
does not work.
Verify that:
v The computer is turned on.
v The USB keyboard or mouse is correctly connected to one of the USB
connectors on the computer.
v For the USB keyboard, no keys are stuck.
© Copyright Lenovo 2010
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Action
The operating system does not
start.
Verify that you list the device where the operating system resides in the startup
device sequence. Usually, the operating system is on the hard disk drive. For
more information, see “Selecting a startup device” on page 53.
The computer beeps multiple
times before the operating
system starts.
Verify that no keys are stuck.
Diagnostic programs
Diagnostic programs are used to test hardware components of your computer.
Diagnostic programs can also report operating-system-controlled settings that
interfere with the correct operation of your system. There are two programs
preinstalled on your computer to help you diagnose computer problems:
v Lenovo ThinkVantage Toolbox (used when you are running the Windows
operating system)
v PC-Doctor for Rescue and Recovery (used when you cannot start the Windows
operating system)
Notes:
1. You can also download the PC-Doctor for DOS diagnostic program from
detailed information.
2. If you are unable to isolate and repair the problem yourself after running the
programs, save and print the log files created by the programs. You will need
the log files when you speak to a Lenovo technical support representative.
Lenovo ThinkVantage Toolbox
The Lenovo ThinkVantage Toolbox program helps you maintain your computer,
improve computing security, diagnose computer problems, get familiar with the
innovative technologies provided by Lenovo, and get more information about your
computer. You can use the diagnostics feature of the Lenovo ThinkVantage Toolbox
program to test devices, diagnose computer problems, create bootable diagnostic
media, update system drivers, and view system information.
v To run the Lenovo ThinkVantage Toolbox program on the Windows 7 operating
system, click Start → All Programs → Lenovo ThinkVantage Tools → System
Health and Diagnostics. Follow the instructions on the screen.
v To run the Lenovo ThinkVantage Toolbox program on the Windows Vista
operating system or the Windows XP operating system, click Start → All
Programs → ThinkVantage → Lenovo ThinkVantage Toolbox. Follow the
instructions on the screen.
For additional information about running the Lenovo ThinkVantage Toolbox
program, refer to the Lenovo ThinkVantage Toolbox help system.
PC-Doctor for Rescue and Recovery
The PC-Doctor for Rescue and Recovery program is part of the Rescue and
Recovery workspace on your Lenovo computer. Use the PC-Doctor for Rescue and
Recovery program if you are unable to start the Windows operating system.
To run the PC-Doctor for Rescue and Recovery program from the Rescue and
Recovery workspace, do the following:
60 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Turn off the computer.
2. Repeatedly press and release the F11 key when turning on the computer. When
you hear beeps or see a logo screen, release the F11 key. The Rescue and
Recovery workspace opens after a short delay.
3. From the Rescue and Recovery workspace, select Launch advanced Rescue and
Recovery → Diagnose hardware. The PC-Doctor for Rescue and Recovery
program opens.
4. Select the desired diagnostic test. Then, follow the instructions on the screen.
For additional information about running the PC-Doctor for Rescue and Recovery
program, refer to the PC-Doctor for Rescue and Recovery help system.
Note: If you encounter failures that prevent you from gaining access to the Rescue
and Recovery workspace, you can run the PC-Doctor for Rescue and
Recovery program after using a rescue medium to recover the computer
from failures and gaining access to the Rescue and Recovery workspace. See
PC-Doctor for DOS
You can also download the latest version of the PC-Doctor for DOS diagnostic
diagnostic program runs independently of the Windows operating system. Use the
PC-Doctor for DOS diagnostic program if you are unable to start the Windows
operating system. You can run the PC-Doctor for DOS diagnostic program from a
diagnostic disc that you created.
Creating a diagnostic disc
This section provides instructions on how to create a diagnostic disc.
To create a diagnostic disc, do the following:
1. Download a self-starting bootable disc image (known as an ISO image) of the
diagnostic program from:
2. Use any disc burning software to create a diagnostic disc with the ISO image.
Running the diagnostic program from the diagnostic disc
This section provides instructions on how to run the diagnostic program from the
diagnostic disc that you created.
To run the diagnostic program from the diagnostic disc that you created, do the
following:
1. Make sure your computer is turned off.
2. Repeatedly press and release the F12 key when turning on the computer. When
the Startup Device Menu opens, release the F12 key.
3. Insert the diagnostic disc into the optical drive.
4. Select the optical drive with the diagnostic disc as the startup device and press
Enter. The diagnostic program opens.
5. Follow the instructions on the screen to run the desired diagnostic test. For
additional help, press the F1 key.
6. Remove the diagnostic disc from the optical drive after completing the
diagnostic test.
Chapter 6. Troubleshooting and diagnostic programs 61
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning an optical mouse
This section provides instructions on how to clean an optical mouse.
An optical mouse uses a LED and an optical sensor to navigate the pointer. If the
pointer on the screen does not move smoothly with the optical mouse, you might
need to clean the mouse.
To clean an optical mouse, do the following:
1. Turn off your computer.
2. Disconnect the mouse cable from the computer.
3. Turn the mouse upside down to check the lens.
a. If there is a smudge on the lens, gently clean the area with a plain
cotton-tipped swab.
b. If there is debris in the lens, gently blow the debris away from the area.
4. Check the surface on which you are using the mouse. If you have a very
intricate picture or pattern beneath the mouse, it may be difficult for the digital
signal processor (DSP) to determine changes in the mouse position.
5. Reconnect the mouse cable to the computer.
6. Turn your computer back on.
62 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7. Getting information, help, and service
This chapter provides information about help, service, and technical assistance for
Lenovo products.
This chapter contains the following topics:
Information resources
You can use the information in this section to access useful resources relating to
your computing needs.
Online Books folder
The Online Books folder preinstalled on your computer contains the ThinkCentre
User Guide, which provides information about your computer to help you set up,
use, and maintain your computer. It requires no Internet access to view the
publication.
To view the publication, click Start → All Programs → Online Books → Online
Books, then double-click the publication for your computer. The publication is also
available on the Lenovo Support Web site at:
Notes:
1. The publication is in PDF version. To view the publication, you need to have
the Adobe Reader program preinstalled on your computer. If the Adobe Reader
program has not been installed on your computer, a message will be displayed
when you attempt to view the PDF file and you will be guided through the
Adobe Reader installation.
2. The publication is available in other languages on the Lenovo Support Web site
at:
3. If you want to install a different language version of the Adobe Reader
program rather than the version preinstalled on your computer, download the
desired language version from the Adobe Web site at:
Lenovo ThinkVantage Tools
Note: The Lenovo ThinkVantage Tools program is only available on computers
with the Windows 7 operating system from Lenovo.
The Lenovo ThinkVantage Tools program helps you work more easily and securely
by providing easy access to various technologies, such as:
v Lenovo ThinkVantage Toolbox
v Password Manager (available on some models)
v Power Manager
v Product Recovery
© Copyright Lenovo 2010
63
Download from Www.Somanuals.com. All Manuals Search And Download.
v Rescue and Recovery
v System Update
To access the Lenovo ThinkVantage Tools program, click Start → All Programs →
Lenovo ThinkVantage Tools.
ThinkVantage Productivity Center
Note: The ThinkVantage Productivity Center program is only available on
computers preinstalled with the Windows Vista operating system or the
Windows XP operating system from Lenovo.
The ThinkVantage Productivity Center program contains information sources and
tools designed to make computing easy and secure. It provides easy access to
various technologies, such as:
v Client Security Solution (available on some models)
v Power Manager
v Product Recovery
v Rescue and Recovery
v System Update
To access the ThinkVantage Productivity Center program, click Start → All
Programs → ThinkVantage → Productivity Center.
Lenovo Welcome
Note: The Lenovo Welcome program is only available on computers preinstalled
with the Windows 7 operating system or the Windows Vista operating
system from Lenovo.
The Lenovo Welcome program introduces some innovative built-in features of
Lenovo to you and guides you through some important setup tasks to help you
make the most of your computer.
Access Help
The Access Help information system provides information about getting started,
doing basic tasks, customizing settings for your personal preference, protecting
data, expanding and upgrading, and troubleshooting.
v To open the Access Help information system on the Windows 7 operating
system, click Start → Help and Support → Lenovo Access Help.
v To open the Access Help information system on the Windows Vista operating
system or the Windows XP operating system, click Start → All Programs →
ThinkVantage → Access Help.
After you have opened the Access Help information system, use the left panel to
make a selection from the Contents tab or the Index tab, or use the Search tab to
find a particular word or phrase.
Safety and warranty
The ThinkCentre Safety and Warranty Guide that came with your computer contains
information about safety, warranty, service and support phone numbers, CRUs,
and other notices and information resources. You can also get the latest service and
64 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
support telephone numbers and a PDF version of the ThinkCentre Safety and
Warranty Guide from the Lenovo Support Web site at:
Before using the information in this manual and the product it supports, be sure to
Lenovo Web site (http://www.lenovo.com)
The Lenovo Web site provides up-to-date information and services to help you
buy, upgrade, and maintain your computer. You can also do the following:
v Shop for desktop and notebook computers, monitors, projectors, upgrades and
accessories for your computer, and special offers.
v Purchase additional services, such as support for hardware, operating systems,
software programs, network setup and configuration, and custom installations.
v Purchase upgrades and extended hardware repair services.
v Download the latest device drivers and software updates for your computer
model.
v Access the online manuals for your products.
v Access the Lenovo Limited Warranty.
v Access troubleshooting and support information for your computer model and
other supported products.
v Find the service and support phone numbers for your country or region.
v Find a Service Provider located near you.
Help and service
This section provides information about obtaining help and service.
Using the documentation and diagnostic programs
If you experience problems with your computer, see Chapter 6, “Troubleshooting
and diagnostic programs,” on page 59. For information about additional resources
to help you troubleshoot your computer problems, see “Information resources” on
If you suspect a software problem, see the documentation that came with the
operating system or software program, including readme files and online help.
Most computers come with a set of diagnostic programs that you can use to help
you identify hardware problems. For instructions on how to use the diagnostic
programs on your computer, see “Diagnostic programs” on page 60.
You can get the latest technical information and download device drivers and
updates from the Lenovo Support Web site at:
Calling for service
During the warranty period, you can get help and information from the Lenovo
Customer Support Center by telephone.
Chapter 7. Getting information, help, and service 65
Download from Www.Somanuals.com. All Manuals Search And Download.
The following services are available during the warranty period:
v Problem determination - Trained service personnel are available to assist you
with determining a hardware problem and deciding what action is necessary to
solve the problem.
v Hardware repair - If the problem is caused by hardware under warranty, trained
service personnel are available to provide the applicable level of service.
v Engineering Change management - There might be changes that are required
after a product has been sold. Lenovo or your reseller will make selected
Engineering Changes (ECs) that apply to your hardware available.
The following items are not covered by the warranty:
v Replacement or use of parts not manufactured for or by Lenovo or
non-warranted Lenovo parts
v Identification of software problem sources
v Configuration of the BIOS as part of an installation or upgrade
v Changes, modifications, or upgrades to device drivers
v Installation and maintenance of network operating systems (NOS)
v Installation and maintenance of application programs
Refer to the safety and warranty information that is provided with your computer
for a complete explanation of warranty terms. You must retain your proof of
purchase to obtain warranty service.
For a list of the Lenovo Support phone numbers for your country or region, go to
ThinkCentre Safety and Warranty Guide that is provided with your computer.
Note: The service and support phone numbers are subject to change without
notice. If the number for your country or region is not provided, contact
your Lenovo reseller or Lenovo marketing representative.
If possible, be at your computer when you call and have the following information
available:
v Machine type and model
v Serial numbers of your hardware products
v Description of the problem
v Exact wording of any error messages
v Hardware and software configuration information
Using other services
If you travel with your computer or relocate it to a country where your desktop or
notebook computer machine type is sold, your computer might be eligible for
International Warranty Service, which automatically entitles you to obtain warranty
service throughout the warranty period. Service will be performed by authorized
Service Providers.
Service methods and procedures vary by country, and some services might not be
available in all countries. International Warranty Service is delivered through the
method of service (such as depot, carry-in, or on-site service) that is provided in
the servicing country. Service centers in certain countries might not be able to
service all models of a particular machine type. In some countries, fees and
restrictions might apply at the time of service.
66 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
To determine whether your computer is eligible for International Warranty Service
and to view a list of the countries where service is available, go to
the screen.
For technical assistance with the installation of or questions related to Service
Packs for your preinstalled Microsoft Windows product, refer to the Microsoft
you can contact the Customer Support Center. Some fees might apply.
Purchasing additional services
During and after the warranty period, you can purchase additional services, such
as support for hardware, operating systems, and application programs; network
setup and configuration; upgraded or extended hardware repair services; and
custom installations. Service availability and service name might vary by country
or region. For more information about these services, go to the Lenovo Web site at:
Chapter 7. Getting information, help, and service 67
Download from Www.Somanuals.com. All Manuals Search And Download.
68 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix. Notices
Lenovo may not offer the products, services, or features discussed in this
document in all countries. Consult your local Lenovo representative for
information on the products and services currently available in your area. Any
reference to a Lenovo product, program, or service is not intended to state or
imply that only that Lenovo product, program, or service may be used. Any
functionally equivalent product, program, or service that does not infringe any
Lenovo intellectual property right may be used instead. However, it is the user’s
responsibility to evaluate and verify the operation of any other product, program,
or service.
Lenovo may have patents or pending patent applications covering subject matter
described in this document. The furnishing of this document does not give you
any license to these patents. You can send license inquiries, in writing, to:
Lenovo (United States), Inc.
1009 Think Place - Building One
Morrisville, NC 27560
U.S.A.
Attention: Lenovo Director of Licensing
LENOVO PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF
ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some
jurisdictions do not allow disclaimer of express or implied warranties in certain
transactions, therefore, this statement may not apply to you.
This information could include technical inaccuracies or typographical errors.
Changes are periodically made to the information herein; these changes will be
incorporated in new editions of the publication. Lenovo may make improvements
and/or changes in the product(s) and/or the program(s) described in this
publication at any time without notice.
The products described in this document are not intended for use in implantation
or other life support applications where malfunction may result in injury or death
to persons. The information contained in this document does not affect or change
Lenovo product specifications or warranties. Nothing in this document shall
operate as an express or implied license or indemnity under the intellectual
property rights of Lenovo or third parties. All information contained in this
document was obtained in specific environments and is presented as an
illustration. The result obtained in other operating environments may vary.
Lenovo may use or distribute any of the information you supply in any way it
believes appropriate without incurring any obligation to you.
Any references in this publication to non-Lenovo Web sites are provided for
convenience only and do not in any manner serve as an endorsement of those Web
sites. The materials at those Web sites are not part of the materials for this Lenovo
product, and use of those Web sites is at your own risk.
Any performance data contained herein was determined in a controlled
environment. Therefore, the result obtained in other operating environments may
© Copyright Lenovo 2010
69
Download from Www.Somanuals.com. All Manuals Search And Download.
vary significantly. Some measurements may have been made on development-level
systems and there is no guarantee that these measurements will be the same on
generally available systems. Furthermore, some measurements may have been
estimated through extrapolation. Actual results may vary. Users of this document
should verify the applicable data for their specific environment.
Television output notice
The following notice applies to models that have the factory-installed
television-output feature.
This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights owned
by Macrovision Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or disassembly is
prohibited.
European conformance CE mark
Trademarks
Lenovo, the Lenovo logo, Personal System/2, PS/2, Rescue and Recovery,
ThinkCentre, and ThinkVantage are trademarks of Lenovo in the United States,
other countries, or both.
Microsoft, Windows, and Windows Vista are trademarks of the Microsoft group of
companies.
Celeron, Intel, Intel Core, and Pentium are trademarks of Intel Corporation in the
United States, other countries, or both.
Linux is a trademark of Linus Torvalds in the United States, other countries, or
both.
Other company, product, or service names may be trademarks or service marks of
others.
70 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A
F
front
front bezel
B
G
getting
C
changing
computer cover
H
heat sink and fan assembly
connectors
connectors, controls, indicators
help
creating
creating and using
I
information
CRU
installing
D
installing options
installing, replacing
internal
drives
K
E
© Copyright Lenovo 2010
71
Download from Www.Somanuals.com. All Manuals Search And Download.
recovering
recovery
reinstalling
L
removing
M
removing, reinstalling
replacing
N
O
optical drive
S
optical mouse
security
P
selecting
password
service
services
settings
power supply
software
power supply assembly
R
72 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
system
system board
T
U
updating
using
V
W
Index 73
Download from Www.Somanuals.com. All Manuals Search And Download.
74 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Number: 71Y8502
Printed in USA
(1P) P/N: 71Y8502
Download from Www.Somanuals.com. All Manuals Search And Download.
|