IdeaPad Z360
Hardware
Maintenance
Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
About this manual
This manual contains service and reference information for the following
Lenovo IdeaPad product:
Lenovo IdeaPad Z360
Use this manual to troubleshoot problems.
The manual is divided into the following sections:
•
The common sections provide general information, guidelines, and safety
information required for servicing computers.
•
The product-specific section includes service, reference, and product-specific
parts information.
Important:
This manual is intended only for trained servicers who are familiar with Lenovo
IdeaPad products. Use this manual to troubleshoot problems effectively.
Before servicing a Lenovo IdeaPad product, make sure to read all the information
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
General safety
Follow these rules below to ensure general safety:
•
Observe a good housekeeping in the area where the machines are put
during and after the maintenance.
•
When lifting any heavy object:
1. Make sure that you can stand safely without slipping.
2. Distribute the weight of the object equally between your feet.
3. Use a slow lifting force. Never move suddenly or twist when you attempt
to lift it.
4. Lift it by standing or pushing up with your leg muscles; this action could
avoid the strain from the muscles in your back. Do not attempt to lift any
object that weighs more than 16 kg (35 lb) or that you think is too heavy
for you.
•
•
•
•
•
Do not perform any action that causes hazards to the customer, or that
makes the machine unsafe.
Before you start the machine, make sure that other service representatives
and the customer are not in a hazardous position.
Place removed covers and other parts in a safe place, keeping them away
from all personnel, while you are servicing the machine.
Keep your toolcase away from walk areas so that other people will not trip it
over.
Do not wear loose clothing that can be trapped in the moving parts of the
machine. Make sure that your sleeves are fastened or rolled up above your
elbows. If your hair is long, fasten it.
•
•
Insert the ends of your necktie or scarf inside clothing or fasten it with the
nonconductive clip, about 8 centimeters (3 inches) from the end.
Do not wear jewelry, chains, metal-frame eyeglasses, or metal fasteners for
your clothing.
Attention: Metal objects are good electrical conductors.
•
•
Wear safety glasses when you are hammering, drilling, soldering, cutting
wire, attaching springs, using solvents, or working in any other conditions
that may be hazardous to your eyes.
After service, reinstall all safety shields, guards, labels, and ground wires.
Replace any safety device that is worn or defective.
•
•
Reinstall all covers correctly before returning the machine to the customer.
Fan louvers on the machine help to prevent the overheating of internal
components. Do not obstruct fan louvers or cover them with labels or
stickers.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety information
Electrical safety
Observe the following rules when working on electrical equipments.
Important:
Use only approved tools and test equipments. Some hand tools have handles
covered with a soft material that does not insulate you when working with live
electrical currents.
Many customers have rubber floor mats near their machines that contain small
conductive fibers to decrease electrostatic discharges. Do not use such kind of mat
to protect yourself from electrical shock.
•
Find the room emergency power-off (EPO) switch, disconnecting the switch
or electrical outlet. If an electrical accident occurs, you can then operate the
switch or unplug the power cord quickly.
•
•
Do not work alone under hazardous conditions or near the equipment that
has hazardous voltages.
Disconnect all power before:
–
–
–
Performing a mechanical inspection
Working near power supplies
Removing or installing main units
•
•
Before you start to work on the machine, unplug the power cord. If you
cannot unplug it, ask the customer to power-off the wall box that supplies
power to the machine, and to lock the wall box in the off position.
If you need to work on a machine that has exposed electrical circuits,
observe the following precautions:
–
Ensure that another person, familiar with the power-off controls, is near
you.
Attention: Another person must be there to switch off the power, if
necessary.
–
Use only one hand when working with powered-on electrical equipment;
keep the other hand in your pocket or behind your back.
Attention: An electrical shock can occur only when there is a complete
circuit. By observing the above rule, you may prevent a current from
passing through your body.
–
When using testers, set the controls correctly and use the approved
probe leads and accessories for that tester.
–
Stand on suitable rubber mats (obtained locally, if necessary) to insulate
you from grounds such as metal floor strips and machine frames.
Observe the special safety precautions when you work with very high voltages;
instructions for these precautions are in the safety sections of maintenance
information. Be extremely careful when you measure the high voltages.
•
Regularly inspect and maintain your electrical hand tools for safe operational
condition.
•
•
Do not use worn or broken tools and testers.
Never assume that power has been disconnected from a circuit. First, check
it to make sure that it has been powered off.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
•
•
•
Always look carefully for possible hazards in your work area. Examples of
these hazards are moist floors, nongrounded power extension cables, power
surges, and missing safety grounds.
Do not touch live electrical circuits with the reflective surface of a plastic
dental mirror. The surface is conductive; such touching can cause personal
injury and machine damage.
Do not service the following parts with the power on when they are removed
from their normal operating places in a machine:
–
–
–
–
Power supply units
Pumps
Blowers and fans
Motor generators
and similar units. (This practice ensures correct grounding of the units.)
If an electrical accident occurs:
•
–
–
–
Caution: do not become a victim yourself.
Switch off the power.
Send the victim to get medical aid.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety information
Safety inspection guide
The purpose of this inspection guide is to assist you in identifying potential
unsafe conditions. As each machine was designed and built, required safety
items were installed to protect users and service personnel from injury. This
guide addresses only those items. You should use good judgment to identify
potential safety hazards according to the attachment of non-Lenovo IdeaPad
features or options not covered by this inspection guide.
If any unsafe conditions are present, you must determine how serious the
apparent hazard could be and whether you can continue without first correcting
the problem.
Consider these conditions and the safety hazards they present:
•
Electrical hazards, especially primary power (primary voltage on the frame
can cause serious or fatal electrical shock)
•
•
Explosive hazards, such as a damaged CRT face or a bulging capacitor
Mechanical hazards, such as loose or missing hardware
To determine whether there are any potential unsafe conditions, use the
following checklist at the beginning of every service task. Begin the checks with
the power off, and the power cord disconnected.
Checklist:
1. Check exterior covers for damage (loose, broken, or sharp edges).
2. Turn off the computer. Disconnect the power cord.
3. Check the power cord for:
a. A third-wire ground connector in good condition. Use a meter to measure
third-wire ground continuity for 0.1 ohm or less between the external
ground pin and the frame ground.
b. The power cord should be the type specified in the parts list.
c. Insulation must not be frayed or worn.
4. Check for cracked or bulging batteries.
5. Remove the cover.
6. Check for any obvious non-Lenovo IdeaPad alterations. Use good judgment
as to the safety of any non-Lenovo IdeaPad alterations.
7. Check inside the unit for any obvious unsafe conditions, such as metal
filings, contamination, water or other liquids, or signs of fire or smoke
damage.
8. Check for worn, frayed, or pinched cables.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
Handling devices that are sensitive to electrostatic discharge
Any computer part containing transistors or integrated circuits (ICs) should be
considered sensitive to electrostatic discharge (ESD). ESD damage can occur
when there is a difference in charge between objects. Protect against ESD
damage by equalizing the charge so that the machine, the part, the work mat,
and the person handling the part are all at the same charge.
Notes:
1. Use product-specific ESD procedures when they exceed the requirements
noted here.
2. Make sure that the ESD protective devices you use have been certified (ISO
9000) as fully effective.
When handling ESD-sensitive parts:
•
•
•
Keep the parts in protective packages until they are inserted into the product.
Avoid contact with other people.
Wear a grounded wrist strap against your skin to eliminate static on your
body.
•
•
•
Prevent the part from touching your clothing. Most clothing is insulative and
retains a charge even when you are wearing a wrist strap.
Use the black side of a grounded work mat to provide a static-free work
surface. The mat is especially useful when handling ESD-sensitive devices.
Select a grounding system, such as those listed below, to provide protection
that meets the specific service requirement.
Note:
The use of a grounding system to guard against ESD damage is desirable but not
necessary.
–
–
Attach the ESD ground clip to any frame ground, ground braid, or green-
wire ground.
When working on a double-insulated or battery-operated system, use an
ESD common ground or reference point. You can use coax or connector-
outside shells on these systems.
–
Use the round ground prong of the ac plug on ac-operated computers.
Grounding requirements
Electrical grounding of the computer is required for operator safety and correct
system function. Proper grounding of the electrical outlet can be verified by a
certified electrician.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety information
Safety notices: multilingual translations
The safety notices in this section are provided in English, French, German,
Hebrew, Italian, Japanese, and Spanish.
Safety notice 1
Before the computer is powered on after FRU replacement, make sure all screws,
springs, and other small parts are in place and are not left loose inside the
computer. Verify this by shaking the computer and listening for rattling sounds.
Metallic parts or metal flakes can cause electrical shorts.
Avant de remettre l’ordinateur sous tension après remplacement d’une unité en
clientèle, vérifiez que tous les ressorts, vis et autres pièces sont bien en place et
bien fixées. Pour ce faire, secouez l’unité et assurez-vous qu’aucun bruit suspect
ne se produit. Des pièces métalliques ou des copeaux de métal pourraient causer
un court-circuit.
Bevor nach einem FRU-Austausch der Computer wieder angeschlossen wird,
muß sichergestellt werden, daß keine Schrauben, Federn oder andere Kleinteile
fehlen oder im Gehäuse vergessen wurden. Der Computer muß geschüttelt und auf
Klappergeräusche geprüft werden. Metallteile oder-splitter können Kurzschlüsse
erzeugen.
Prima di accendere l’elaboratore dopo che é stata effettuata la sostituzione di una
FRU, accertarsi che tutte le viti, le molle e tutte le altri parti di piccole dimensioni
siano nella corretta posizione e non siano sparse all’interno dell’elaboratore.
Verificare ciò scuotendo l’elaboratore e prestando attenzione ad eventuali rumori;
eventuali parti o pezzetti metallici possono provocare cortocircuiti pericolosi.
Antes de encender el sistema despues de sustituir una FRU, compruebe que
todos los tornillos, muelles y demás piezas pequeñas se encuentran en su sitio
y no se encuentran sueltas dentro del sistema. Compruébelo agitando el sistema
y escuchando los posibles ruidos que provocarían. Las piezas metálicas pueden
causar cortocircuitos eléctricos.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
Safety notice 2
DANGER
Some standby batteries contain a small amount of nickel and cadmium. Do not
disassemble a standby battery, recharge it, throw it into fire or water, or short-
circuit it. Dispose of the battery as required by local ordinances or regulations.
Use only the battery in the appropriate parts listing. Use of an incorrect battery can
result in ignition or explosion of the battery.
Certaines batteries de secours contiennent du nickel et du cadmium. Ne les
démontez pas, ne les rechargez pas, ne les exposez ni au feu ni à l’eau. Ne
les mettez pas en court-circuit. Pour les mettre au rebut, conformez-vous à la
réglementation en vigueur. Lorsque vous remplacez la pile de sauvegarde ou celle
de l’horloge temps réel, veillez à n’utiliser que les modèles cités dans la liste de
pièces détachées adéquate. Une batterie ou une pile inappropriée risque de prendre
feu ou d’exploser.
Die Bereitschaftsbatterie, die sich unter dem Diskettenlaufwerk befindet,
kann geringe Mengen Nickel und Cadmium enthalten. Sie darf nicht zerlegt,
wiederaufgeladen, kurzgeschlossen, oder Feuer oder Wasser ausgesetzt werden.
Bei der Entsorgung die örtlichen Bestimmungen für Sondermüll beachten. Beim
Ersetzen der Bereitschafts-oder Systembatterie nur Batterien des Typs verwenden,
der in der Ersatzteilliste aufgeführt ist. Der Einsatz falscher Batterien kann zu
Entzündung oder Explosion führen.
Alcune batterie di riserva contengono una piccola quantità di nichel e cadmio.
Non smontarle, ricaricarle, gettarle nel fuoco o nell’acqua né cortocircuitarle.
Smaltirle secondo la normativa in vigore (DPR 915/82, successive disposizioni e
disposizioni locali). Quando si sostituisce la batteria dell’RTC (real time clock) o
la batteria di supporto, utilizzare soltanto i tipi inseriti nell’appropriato Catalogo
parti. L’impiego di una batteria non adatta potrebbe determinare l’incendio o
l’esplosione della batteria stessa.
Algunas baterías de reserva contienen una pequeña cantidad de níquel y cadmio.
No las desmonte, ni recargue, ni las eche al fuego o al agua ni las cortocircuite.
Deséchelas tal como dispone la normativa local. Utilice sólo baterías que se
encuentren en la lista de piezas. La utilización de una batería no apropiada puede
provocar la ignición o explosión de la misma.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety information
Safety notice 3
DANGER
The battery pack contains small amounts of nickel. Do not disassemble it, throw
it into fire or water, or short-circuit it. Dispose of the battery pack as required by
local ordinances or regulations. Use only the battery in the appropriate parts listing
when replacing the battery pack. Use of an incorrect battery can result in ignition
or explosion of the battery.
La batterie contient du nickel. Ne la démontez pas, ne l’exposez ni au feu ni à l’eau.
Ne la mettez pas en court-circuit. Pour la mettre au rebut, conformez-vous à la
réglementation en vigueur. Lorsque vous remplacez la batterie, veillez à n’utiliser
que les modèles cités dans la liste de pièces détachées adéquate. En effet, une
batterie inappropriée risque de prendre feu ou d’exploser.
Akkus enthalten geringe Mengen von Nickel. Sie dürfen nicht zerlegt,
wiederaufgeladen, kurzgeschlossen, oder Feuer oder Wasser ausgesetzt werden.
Bei der Entsorgung die örtlichen Bestimmungen für Sondermüll beachten. Beim
Ersetzen der Batterie nur Batterien des Typs verwenden, der in der Ersatzteilliste
aufgeführt ist. Der Einsatz falscher Batterien kann zu Entzündung oder Explosion
führen.
La batteria contiene piccole quantità di nichel. Non smontarla, gettarla nel fuoco
o nell’acqua né cortocircuitarla. Smaltirla secondo la normativa in vigore (DPR
915/82, successive disposizioni e disposizioni locali). Quando si sostituisce la
batteria, utilizzare soltanto i tipi inseriti nell’appropriato Catalogo parti. L’impiego
di una batteria non adatta potrebbe determinare l’incendio o l’esplosione della
batteria stessa.
Las baterías contienen pequeñas cantidades de níquel. No las desmonte, ni
recargue, ni las eche al fuego o al agua ni las cortocircuite. Deséchelas tal como
dispone la normativa local. Utilice sólo baterías que se encuentren en la lista de
piezas al sustituir la batería. La utilización de una batería no apropiada puede
provocar la ignición o explosión de la misma.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
Safety notice 4
DANGER
The lithium battery can cause a fire, an explosion, or a severe burn. Do not
recharge it, remove its polarized connector, disassemble it, heat it above 100°C
(212°F), incinerate it, or expose its cell contents to water. Dispose of the battery as
required by local ordinances or regulations. Use only the battery in the appropriate
parts listing. Use of an incorrect battery can result in ignition or explosion of the
battery.
La pile de sauvegarde contient du lithium. Elle présente des risques d’incendie,
d’explosion ou de brûlures graves. Ne la rechargez pas, ne retirez pas son
connecteur polarisé et ne la démontez pas. Ne l’exposez pas à une temperature
supérieure à 100°C, ne la faites pas brûler et n’en exposez pas le contenu à l’eau.
Mettez la pile au rebut conformément à la réglementation en vigueur. Une pile
inappropriée risque de prendre feu ou d’exploser.
Die Systembatterie ist eine Lithiumbatterie. Sie kann sich entzünden, explodieren
oder schwere Verbrennungen hervorrufen. Batterien dieses Typs dürfen nicht
aufgeladen, zerlegt, über 100 C erhitzt oder verbrannt werden. Auch darf ihr
Inhalt nicht mit Wasser in Verbindung gebracht oder der zur richtigen Polung
angebrachte Verbindungsstecker entfernt werden. Bei der Entsorgung die örtlichen
Bestimmungen für Sondermüll beachten. Beim Ersetzen der Batterie nur Batterien
des Typs verwenden, der in der Ersatzteilliste aufgeführt ist. Der Einsatz falscher
Batterien kann zu Entzündung oder Explosion führen.
La batteria di supporto e una batteria al litio e puo incendiarsi, esplodere o
procurare gravi ustioni. Evitare di ricaricarla, smontarne il connettore polarizzato,
smontarla, riscaldarla ad una temperatura superiore ai 100 gradi centigradi,
incendiarla o gettarla in acqua. Smaltirla secondo la normativa in vigore (DPR
915/82, successive disposizioni e disposizioni locali). L’impiego di una batteria
non adatta potrebbe determinare l’incendio o l’esplosione della batteria stessa.
La batería de repuesto es una batería de litio y puede provocar incendios,
explosiones o quemaduras graves. No la recargue, ni quite el conector polarizado,
ni la desmonte, ni caliente por encima de los 100°C (212°F), ni la incinere ni
exponga el contenido de sus celdas al agua. Deséchela tal como dispone la
normativa local.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety information
Safety notice 5
If the LCD breaks and the fluid from inside the LCD gets into your eyes or on your
hands, immediately wash the affected areas with water at least for 15 minutes.
Seek medical care if any symptoms caused by the fluid are present after washing.
Si le panneau d’affichage à cristaux liquides se brise et que vous recevez dans les
yeux ou sur les mains une partie du fluide, rincez-les abondamment pendant au
moins quinze minutes. Consultez un médecin si des symptômes persistent après le
lavage.
Die Leuchtstoffröhre im LCD-Bildschirm enthält Quecksilber. Bei der Entsorgung
die örtlichen Bestimmungen für Sondermüll beachten. Der LCD-Bildschirm
besteht aus Glas und kann zerbrechen, wenn er unsachgemäß behandelt wird
oder der Computer auf den Boden fällt. Wenn der Bildschirm beschädigt ist und
die darin befindliche Flüssigkeit in Kontakt mit Haut und Augen gerät, sollten
die betroffenen Stellen mindestens 15 Minuten mit Wasser abgespült und bei
Beschwerden anschließend ein Arzt aufgesucht werden.
Nel caso che caso l’LCD si dovesse rompere ed il liquido in esso contenuto
entrasse in contatto con gli occhi o le mani, lavare immediatamente le parti
interessate con acqua corrente per almeno 15 minuti; poi consultare un medico se i
sintomi dovessero permanere.
Si la LCD se rompe y el fluido de su interior entra en contacto con sus ojos o sus
manos, lave inmediatamente las áreas afectadas con agua durante 15 minutos
como mínimo. Obtenga atención medica si se presenta algún síntoma del fluido
despues de lavarse.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
Safety notice 6
DANGER
To avoid shock, do not remove the plastic cover that protects the lower part of the
inverter card.
Afin d’éviter tout risque de choc électrique, ne retirez pas le cache en plastique
protégeant la partie inférieure de la carte d’alimentation.
Aus Sicherheitsgründen die Kunststoffabdeckung, die den unteren Teil der
Spannungswandlerplatine umgibt, nicht entfernen.
Per evitare scosse elettriche, non rimuovere la copertura in plastica che avvolge la
parte inferiore della scheda invertitore.
Para evitar descargas, no quite la cubierta de plástico que rodea la parte baja de la
tarjeta invertida.
Safety notice 7
DANGER
Though the main batteries have low voltage, a shorted or grounded battery can
produce enough current to burn personnel or combustible materials.
Bien que le voltage des batteries principales soit peu élevé, le court-circuit ou la
mise à la masse d’une batterie peut produire suffisamment de courant pour brûler
des matériaux combustibles ou causer des brûlures corporelles graves.
Obwohl Hauptbatterien eine niedrige Spannung haben, können sie doch bei
Kurzschluß oder Erdung genug Strom abgeben, um brennbare Materialien zu
entzünden oder Verletzungen bei Personen hervorzurufen.
Sebbene le batterie di alimentazione siano a basso voltaggio, una batteria in
corto circuito o a massa può fornire corrente sufficiente da bruciare materiali
combustibili o provocare ustioni ai tecnici di manutenzione.
Aunque las baterías principales tienen un voltaje bajo, una batería cortocircuitada
o con contacto a tierra puede producir la corriente suficiente como para quemar
material combustible o provocar quemaduras en el personal.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety information
Safety notice 8
DANGER
Before removing any FRU, turn off the computer, unplug all power cords from
electrical outlets, remove the battery pack, and then disconnect any interconnecting
cables.
Avant de retirer une unité remplaçable en clientèle, mettez le système hors tension,
débranchez tous les cordons d’alimentation des socles de prise de courant, retirez
la batterie et déconnectez tous les cordons d’interface.
Die Stromzufuhr muß abgeschaltet, alle Stromkabel aus der Steckdose gezogen,
der Akku entfernt und alle Verbindungskabel abgenommen sein, bevor eine FRU
entfernt wird.
Prima di rimuovere qualsiasi FRU, spegnere il sistema, scollegare dalle prese
elettriche tutti i cavi di alimentazione, rimuovere la batteria e poi scollegare i cavi
di interconnessione.
Antes de quitar una FRU, apague el sistema, desenchufe todos los cables de
las tomas de corriente eléctrica, quite la batería y, a continuación, desconecte
cualquier cable de conexión entre dispositivos.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
Laser compliance statement
Some models of Lenovo IdeaPad computer are equipped from the factory with
an optical storage device such as a CD-ROM drive or a DVD-ROM drive. Such
devices are also sold separately as options. If one of these drives is installed,
it is certified in the U.S. to conform to the requirements of the Department of
Health and Human Services 21 Code of Federal Regulations (DHHS 21 CFR)
Subchapter J for Class 1 laser products. Elsewhere, the drive is certified to
conform to the requirements of the International Electrotechnical Commission
(IEC) 825 and CENELEC EN 60 825 for Class 1 laser products.
If a CD-ROM drive, a DVD-ROM drive, or another laser device is installed, note
the following:
CAUTION
Use of controls or adjustments or performance of procedures other than those
specified herein might result in hazardous radiation exposure.
O uso de controles, ajustes ou desempenho de procedimentos diferentes daqueles
aqui especificados pode resultar em perigosa exposição à radiação.
Pour éviter tout risque d’exposition au rayon laser, respectez les consignes de
réglage et d’utilisation des commandes, ainsi que les procédures décrites.
Werden Steuer- und Einstellelemente anders als hier festgesetzt verwendet, kann
gefährliche Laserstrahlung auftreten.
L’utilizzo di controlli, regolazioni o l’esecuzione di procedure diverse da quelle
specificate possono provocare l’esposizione a.
El uso de controles o ajustes o la ejecución de procedimientos distintos de los aquí
especificados puede provocar la exposición a radiaciones peligrosas.
Opening the CD-ROM drive, the DVD-ROM drive, or any other optical storage
device could result in exposure to hazardous laser radiation. There are no
serviceable parts inside those drives. Do not open.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety information
A CD-ROM drive, a DVD-ROM drive, or any other storage device installed may
contain an embedded Class 3A or Class 3B laser diode. Note the following:
DANGER
Emits visible and invisible laser radiation when open. Do not stare into the beam,
do not view directly with optical instruments, and avoid direct exposure to the
beam.
Radiação por raio laser ao abrir. Não olhe fixo no feixe de luz, não olhe
diretamente por meio de instrumentos óticos e evite exposição direta com o feixe
de luz.
Rayonnement laser si carter ouvert. Évitez de fixer le faisceau, de le regarder
directement avec des instruments optiques, ou de vous exposer au rayon.
Laserstrahlung bei geöffnetem Gerät. Nicht direkt oder über optische Instrumente
in den Laserstrahl sehen und den Strahlungsbereich meiden.
Kinyitáskor lézersugár ! Ne nézzen bele se szabad szemmel, se optikai
eszközökkel. Kerülje a sugárnyalábbal való érintkezést!
Aprendo l’unità vengono emesse radiazioni laser. Non fissare il fascio, non
guardarlo direttamente con strumenti ottici e evitare l’esposizione diretta al fascio.
Radiación láser al abrir. No mire fijamente ni examine con instrumental óptico el
haz de luz. Evite la exposición directa al haz.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
Important service information
This chapter presents the following important service information:
•
–
–
•
Important:
BIOS and device driver fixes are customer-installable. The BIOS and device
drivers are posted on the customer support site:
Strategy for replacing FRUs
Before replacing parts:
Make sure that all software fixes, drivers, and BIOS downloads are installed
before replacing any FRUs listed in this manual.
After a system board is replaced, ensure that the latest BIOS is loaded to the
system board before completing the service action.
To download software fixes, drivers, and BIOS, follow the steps below:
2. Enter a serial number or select a product or use Lenovo smart downloading.
3. Select the BIOS/Driver/Applications and download.
4. Follow the directions on the screen and install the necessary software.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Important service information
Use the following strategy to prevent unnecessary expense for replacing and
servicing FRUs:
•
If you are instructed to replace an FRU, but the replacement does not solve
the problem, reinstall the original FRU before you continue.
•
Some computers have both a processor board and a system board. If you
are instructed to replace either of them, and replacing one of them does not
solve the problem, reinstall that board, and then replace the other one.
•
If an adapter or a device consists of more than one FRU, any of the FRUs
may be the cause of the error. Before replacing the adapter or device,
remove the FRUs one by one to see if the symptoms change. Replace only
the FRU that changed the symptoms.
Attention: The setup configuration on the computer you are servicing may
have been customized. Running Automatic Configuration may alter the
settings. Note the current configuration settings (using the View Configuration
option); then, when service has been completed, verify that those settings
remain in effect.
Strategy for replacing a hard disk drive
Always try to run a low-level format before replacing a hard disk drive. This
will cause all customer data on the hard disk to be lost. Make sure that the
customer has a current backup of the data before performing this action.
Attention: The drive startup sequence in the computer you are servicing may
have been changed. Be extremely careful during write operations such as
copying, saving, or formatting. If you select an incorrect drive, data or programs
can be overwritten.
Important notice for replacing a system board
Some components mounted on a system board are very sensitive. Improper
handling can cause damage to those components, and may cause a system
malfunction.
Attention: When handling a system board:
•
•
•
Do not drop the system board or apply any excessive force to it.
Avoid rough handling of any kind.
Avoid bending the system board and hard pushing to prevent cracking at
each BGA (Ball Grid Array) chipset.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
Important information about replacing RoHS compliant FRUs
RoHS, The Restriction of Hazardous Substances in Electrical and
Electronic Equipment Directive (2002/95/EC) is a European Union legal
requirement affecting the global electronics industry. RoHS requirements
must be implemented on Lenovo products placed on the market after
June 2006. Products on the market before June 2006 are not required to
have RoHS compliant parts. If the original FRU parts are non-compliant,
replacement parts can also be non-compliant. In all cases if the original
FRU parts are RoHS compliant, the replacement part must also be RoHS
compliant.
Note: RoHS and non-RoHS FRU part numbers with the same fit and function
are identified with unique FRU part numbers.
Lenovo plans to transit to RoHS compliance well before the implementation
date and expects its suppliers to be ready to support Lenovo’s requirements
and schedule in the EU. Products sold in 2005 and 2006 will contain some
RoHS compliant FRUs. The following statement pertains to these products and
any product Lenovo produces containing RoHS compliant FRUs.
RoHS compliant FRUs have unique FRU part numbers. Before or after the
RoHS implementation date, failed RoHS compliant parts must always be
replaced with RoHS compliant ones, so only the FRUs identified as compliant
in the system HMM or direct substitutions for those FRUs may be used.
Products marketed before June 2006 Products marketed after June 2006
Current or
original part
Replacement FRU Current or
original part
Replacement FRU
Non-RoHS
Non-RoHS
Non-RoHS
RoHS
Can be Non-RoHS
Can be RoHS
Must be RoHS
Can sub to RoHS
Must be RoHS
Must be RoHS
Note: A direct substitution is a part with a different FRU part number that is
automatically shipped by the distribution center at the time of the order.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
General checkout
General checkout
This chapter presents the following information:
•
•
Before you go to the checkout, make sure to read the following important notes:
Important notes:
• Only certified trained personnel can service the computer.
• Before replacing any FRU, read the entire page on removing and replacing
FRUs.
• When you replace FRUs, use new nylon-coated screws.
• Be extremely careful during such write operations as copying, saving, or
formatting. Drives in the computer that you are servicing sequence might
have been altered. If you select an incorrect drive, data or programs might be
overwritten.
• Replace an FRU only with another FRU of the correct model. When you
replace an FRU, make sure that the machine model and the FRU part number are
correct by referring to the FRU parts list.
• An FRU should not be replaced just because of a single, unreproducible
failure. Single failures can occur for a variety of reasons that have nothing to
do with a hardware defect, such as cosmic radiation, electrostatic discharge, or
software errors. Consider replacing an FRU only when a problem recurs. If you
suspect that an FRU is defective, clear the error logs and run the test again. If the
error does not recur, do not replace the FRU.
• Be careful not to replace a nondefective FRU.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
What to do first
When you do return an FRU, you must include the following information in the
parts exchange form or parts return form that you attach to it:
1. Name and phone number of servicer
2. Date of service
3. Date on which the machine failed
4. Date of purchase
5. Procedure index and page number in which the failing FRU was detected
6. Failing FRU name and part number
7. Machine type, model number, and serial number
8. Customer’s name and address
Note for warranty: During the warranty period, the customer may be
responsible for repair costs if the computer damage was caused by misuse,
accident, modification, unsuitable physical or operating environment, or
improper maintenance by the customer.
The following is a list of some common items that are not covered under
warranty and some symptoms that might indicate that the system was
subjected to stress beyond normal use.
Before checking problems with the computer, determine whether the damage is
covered under the warranty by referring to the following list:
The following are not covered under warranty:
•
LCD panel cracked from the application of excessive force or from being
dropped
•
•
•
Scratched (cosmetic) parts
Distortion, deformation, or discoloration of the cosmetic parts
Plastic parts, latches, pins, or connectors that have been cracked or broken
by excessive force
•
•
Damage caused by liquid spilled into the system
Damage caused by the improper insertion of a PC Card or the installation of
an incompatible card
•
•
Improper disc insertion or use of an optical drive
Diskette drive damage caused by pressure on the diskette drive cover,
foreign material in the drive, or the insertion of a diskette with multiple labels
•
•
•
•
•
Damaged or bent diskette eject button
Fuses blown by attachment of a nonsupported device
Forgotten computer password (making the computer unusable)
Sticky keys caused by spilling a liquid onto the keyboard
Use of an incorrect AC adapter on laptop products
The following symptoms might indicate damage caused by nonwarranted
activities:
•
•
Missing parts might be a symptom of unauthorized service or modification.
If the spindle of a hard disk drive becomes noisy, it may have been subjected
to excessive force, or dropped.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
General checkout
Power system checkout
To verify a symptom, follow the steps below:
1. Turn off the computer.
2. Remove the battery pack.
3. Connect the AC adapter.
4. Make sure that power is supplied when you turn on the computer.
5. Turn off the computer.
6. Disconnect the AC adapter and install the charged battery pack.
7. Make sure that the battery pack supplies power when you turn on the
computer.
If you suspect a power problem, see the appropriate one of the following power
supply checkouts:
•
•
•
Checking the AC adapter
You are here because the computer fails only when the AC adapter is used.
•
•
If the power-on indicator does not turn on, check the power cord of the AC
adapter for correct continuity and installation.
If the computer does not charge during operation, go to “Checking
To check the AC adapter, follow the steps below:
1. Unplug the AC adapter cable from the computer.
2. Measure the output voltage at the plug of the AC adapter cable. See the
following figure:
Pin
1
Voltage (V DC)
+20
0
2
2
1
Note: Output voltage for the AC adapter pin No. 2 may differ from the one you
are servicing.
3. If the voltage is not correct, replace the AC adapter.
4. If the voltage is acceptable, do the following:
•
•
Replace the system board.
Note: Noise from the AC adapter does not always indicate a defect.
Checking operational charging
To check whether the battery charges properly during operation, use a
discharged battery pack or a battery pack that has less than 50% of the total
power remaining when installed in the computer.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
Perform operational charging. If the battery status indicator or icon does not
light on, remove the battery pack and let it return to room temperature. Reinstall
the battery pack. If the charge indicator or icon is still off, replace the battery
pack.
If the charge indicator still does not light on, replace the system board. Then
reinstall the battery pack. If it is still not charged, go to the next section.
Checking the battery pack
Battery charging does not start until the Power Meter shows that less than 95%
of the total power remains; under this condition the battery pack can charge to
100% of its capacity. This protects the battery pack from being overcharged or
from having a shortened life.
To check your battery, move your cursor to the Power Meter icon in the icon
tray of the Windows® taskbar and wait for a moment (but do not click it), and the
percentage of battery power remaining is displayed. To get detailed information
about the battery, double-click the Power Meter icon.
Note: If the battery pack becomes hot, it may not be able to be charged.
Remove it from the computer and leave it at room temperature for a while. After
it cools down, reinstall and recharge it.
To check the battery pack, follow the steps below:
1. Turn off the computer.
2. Remove the battery pack and measure the voltage between battery
terminals 1 (+) and 7 (-). See the following figure:
Terminal
Voltage (V DC)
+0 to +14
1
7
7(-)
6(-)
5
Ground (-)
4
3
2(+)
1(+)
3. If the voltage is less than +11.0 V DC, the battery pack has been
discharged.
Note: Recharging will be continued for at least 3 hours, even though the
indicator does not light on.
If the voltage is still less than +11.0 V DC after recharging, replace the
battery.
4. If the voltage is more than +11.0 V DC, measure the resistance between
battery terminals 5 and 7. The resistance must be 4 to 30 KΩ.
If the resistance is not correct, replace the battery pack. If the resistance is
correct, replace the system board.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Related service information
Related service information
This chapter presents the following information:
•
•
•
Restoring the factory contents by using OneKey Recovery
Restore of factory default
The IdeaPad Z360 computers come with pre-installed OneKey Rescue System.
In order to save application files and the initial backed up files of the system,
the hard disk in a Lenovo computer includes a hidden partition when it is
shipped. If you need to restore the system to the point of your first boot up, just
enter Lenovo OneKey Rescue System and run Restore to factory default. For
the User Guide for OneKey Rescue System
details of OneKey Rescue System, see
.
This will delete all the new data on the system partition (C drive), which
Note:
is not recoverable. Make sure to back up your critical data before you perform this
action.
Using recovery discs
When you replace a hard disk drive in your computer, you are unable to use
the pre-installed Lenovo OneKey Recovery and OneKey Rescue. However, you
can use the recovery discs that store your backed up data to restore your new
hard drive to a previous backup status.
You can create recovery discs by burning the backup image to a CD/DVD
Note:
as recovery discs. For details of Create recovery discs, see the User Guide for
OneKey Rescue System.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
When you use the recovery discs to boot your computer, the system will enter
the user interface for system recovery automatically. Please follow the prompt
to insert the backup discs to complete the whole recovery process.
The recovery process might take up to 2 hours.
Note:
Passwords
As many as two passwords may be needed for any Lenovo IdeaPad computer:
the power-on password (POP) and the supervisor password (SVP).
If any of these passwords has been set, a prompt for it appears on the screen
whenever the computer is turned on. The computer does not start until the
password is entered.
Exception: If only an SVP is installed, the password prompt does not appear
when the operating system is booted.
Power-on password
A power-on password (POP) protects the system from being powered on by
an unauthorized person. The password must be entered before an operating
system can be booted.
Supervisor password
A supervisor password (SVP) protects the system information stored in the
BIOS Setup Utility. The user must enter the SVP in order to get access to the
BIOS Setup Utility and change the system configuration.
Attention: If the SVP has been forgotten and cannot be made available to
the servicer, there is no service procedure to reset the password. The system
board must be replaced for a scheduled fee.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Related service information
Power management
Note: Power management modes are not supported for APM operating system.
To reduce power consumption, the computer has three power management
modes: screen blank, sleep (standby), and hibernation.
Screen blank mode
If the time set on the “Turn off monitor” timer in the operating system expires,
the LCD backlight turns off. You can also turn off the LCD backlight by pressing
Fn+F2.
To end screen blank mode and resume normal operation, press any key.
Sleep (standby) mode
When the computer enters sleep (standby) mode, the following events occur in
addition to what occurs in screen blank mode:
•
•
•
The LCD is powered off.
The hard disk drive is powered off.
The CPU stops.
To enter sleep (standby) mode, press Fn+F1.
In certain circumstances, the computer goes into sleep (standby) mode
automatically:
•
If a “suspend time” has been set on the timer, and the user does not do any
operation with the keyboard, the hard disk, the parallel connector, or the
diskette drive within that time.
•
If the battery indicator is amber, indicating that the battery power is low.
(Alternatively, if Hibernate when battery becomes low has been selected
in the “Power Management Properties” window, the computer goes into
hibernation mode.)
To cause the computer to return from sleep (standby) mode and resume the
operation, do one of the following:
•
•
•
Press the Fn key.
Open the lid.
Turn on the power switch.
Also, in the following event, the computer automatically returns from sleep
(standby) mode and resumes the operation:
•
The time set on the resume timer elapses.
Note: The computer does not accept any input immediately after it enters
sleep (standby) mode. Wait a few seconds before taking any action to reenter
operation mode.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
Hibernation mode
In hibernation mode, the following occurs:
•
•
The system status, RAM, VRAM, and setup data are stored on the hard disk.
The system is powered off.
To cause the computer to enter hibernation mode, follow the steps below:
•
If you are using the ACPI operating system and have defined one of the
following actions as the event that causes the system to go into hibernation
mode, perform that action:
–
–
Closing the lid.
Pressing the power button.
Also, the computer goes into hibernation mode automatically in either of the
following conditions:
•
If a “hibernation time” has been set on the timer, and if the user does not do
any operation with the keyboard, the hard disk drive, the parallel connector,
or the diskette drive within that time.
•
If the timer conditions are satisfied in suspend mode.
When the power is turned on, the computer returns from hibernation mode and
resumes operation. The hibernation file in the boot record on the hard disk drive
is read, and system status is restored from the hard disk drive.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Z360
Lenovo IdeaPad Z360
This chapter presents the following product-specific service references and
product-specific parts information:
•
•
•
•
•
•
•
Specifications
The following table lists the specifications of the Lenovo IdeaPad Z360 :
Table 1. Specifications
Feature
Description
Processor
•
Intel® Core™ i7/i5/i3, Power Optimized Performance,
Arrandale, 32nm (Calpella)
Core Chipset
•
•
•
•
•
•
•
•
Intel HM55 (Calpella)
Bus architecture
Hyper Transport Link 16 x 16
A link Express2
DDRIII 800~1333MHz
PCI-Express x 16
Graphic memory
chip
Intel HM55 Intergrated
Nvidia N11M-GE2 (support Optimus) w/512MB, 1G VRAM
Display
13.3-Inch, 1366 x 768 pixels HD, 16:9, WLED type, gloss,
Wedge type. 220nits typ. 190nits min. (5P)
Standard
memory
•
DDR III, update to 1066/1333, SODIMM socket x 2 (max 4GB
per slot)
CMOS RAM
Hard disk drive
Optical drive
•
•
•
•
•
•
•
•
•
•
•
•
•
•
16M Bytes
2.5” 9.5mm SATA2.0, 7200&5400rpm
12.7mm Fixed Bay, tray-in
DVD Rambo
Blue Ray Combo
External monitor connector
Stereo headphone jack
Microphone jack
I/O port
RJ45 x 1
HDMI port
USB2.0 x 2
E-SATA + USB combo x 1
5-in-1 media card reader
N/A
MODEM slot
27
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
Table 1. Specifications (continued)
Feature
Description
Audio
•
•
•
•
•
•
•
•
•
1/8" Stereo Headphone Output Jack
1/8" Microphone Input Jack
Built-in stereo speakers
Video
CRT port x 1 (on planar)
HDMI port x 1 (on planar)
Ethernet (on the
system board)
100/1000 Fast Ethernet Controller 8
Atheros AR8152-AL1A and AR8151-AL1A-R
1 slot for WLAN card (HMC)
PCI Express
Mini Card slot
1 slot for WWAN and reserved for SSD (FMC on selected
models only)
ExpressCard
slot
•
•
N/A
WLAN Card
802.11 a/b/g/n WIF
- Intel AGN Puma Peak HMC (2x2)
- Intel BGN Condor Peak HMC (1x2)
- Non-Intel BGN HMC
•
802.11a/g/n && 802.16e Wimax
- Intel Kilmer Peak HMC (2x2)
- Broadcom 802.11 b/g
•
•
•
•
•
•
•
•
•
Tech Ready
WWAN card
Selected model
BCM92070 BT2.1 + EDR
Bluetooth
wireless
Selected Model
Keyboard
Touch pad
6 row Lenovo Frame Keyboard
Normal type w/ two Rubber doom button and 1 LED indicator 9
No gesture function support, ALPS
Fixed Focus CMOS camera
Integrated
camera
1.3 mega slim type, with 1 LED indicator
(Combo with single digital mic)
Battery
•
•
•
•
•
•
2.6mAh, 6 cell Li-ion Battery
2.2mAh, 6 cell Li-ion Battery
(18650), 3S2P, 11.1V, 57Wh
>= 6 Hrs with 6 cell
65 W/20 V
AC adapter
Pre-installed
operating
system
Windows 7
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Z360
Status indicators
The system status indicators below show the computer status:
1
2
7
3
4
5
6
Table 2. Status indicators
Indicator
Meaning
White:
Caps Lock mode is enabled. You can enter all
alphabetic characters (A-Z) in uppercase without
pressing the Shift key. To enable or disable Caps
Lock mode, press the CapsLk key.
Caps Lock
1
White:
White:
The numeric keypad on the keyboard is enabled.
To enable or disable the keypad, press and hold
the Fn key, and press the F8 (NumLk) key.
Num lock
2
3
System is enabled.
Power on
Blinking white:
System is in sleep mode.
System is in hibernate mode or shut down.
Off:
29
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
Table 2. Status indicators (continued)
Indicator
Battery status Blinking amber: (500ms off/1s on)
The remaining power of the battery is less than 5%
Meaning
4
of its capacity.
Blinking amber: (100ms off/3.2s on)
The battery is being charged with the remaining
power between 5% and 20% of its capacity.
Amber:
The computer is operating on battery power with
the remaining power between 5% and 20% of its
capacity.
Blinking white:
The battery is being charged with the remaining
power between 20% and 80% of its capacity.
White:
White:
The remaining power of the battery is more than
80% of its capacity, or the computer is operating on
battery power with the remaining power between
20% and 80% of its capacity.
Drive in use
Data is being read from or written to the hard disk
drive or the optical disk drive. When this indicator
is on, do not put the computer into standby mode
or turn off the computer.
5
Note: Do not move the system while the white drive-in-use
light is on. Sudden physical shock could cause drive errors.
Wireless
status
White:
Off:
Any one of the wireless devices (WLAN/Bluetooth/
WWAN) is enabled.
6
7
All the wireless devices (WLAN/Bluetooth/WWAN)
are disabled.
Touchpad
White:
The touchpad is disabled. To enable or disable the
touchpad, press and hold the Fn key, and press
the F6 key.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Z360
Fn key combinations
The following table shows the function of each combination of Fn with a
function key.
Table 4. Fn key combinations
Key combination
Description
Fn + Esc:
Fn + F1:
Fn + F2:
Turn on/off the integrated camera.
Enter sleep mode.
Turn on/off the backlight of the LCD screen.
Open the interface for the display device switch to select
this notebook or an external display.
Fn + F3:
Fn + F4:
Fn + F5:
Open the interface for display resolution settings.
Open the interface for integrated wireless devices settings
(on/off).
Fn + F6:
Enable/Disable the touchpad.
Enable/Disable the numeric keycard.
Start/Pause playback of Windows Media Player.
Stop playback of Windows Media Player.
Skip to the previous track.
Fn + F8:
Fn + F9:
Fn + F10:
Fn + F11:
Fn + F12:
Fn + PgUp:
Fn + PrtSc:
Fn + Home:
Fn + End:
Fn + PgDn:
Skip to the next track.
Enable/Disable the scroll lock.
Activate the system request.
Activate the pause function.
Activate the break function.
Activate the insert function.
Fn +
Fn +
/
:
Increase/Decrease display brightness.
Increase/Decrease sound volume.
/
:
31
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
FRU replacement notices
This section presents notices related to removing and replacing parts. Read
this section carefully before replacing any FRU.
Screw notices
Loose screws can cause a reliability problem. In the Lenovo IdeaPad computer,
this problem is addressed with special nylon-coated screws that have the
following characteristics:
•
•
•
•
They maintain tight connections.
They do not easily come loose, even with shock or vibration.
They are harder to tighten.
Each one should be used only once.
Do the following when you service this machine:
•
•
•
Keep the screw kit in your tool bag.
Always use new screws.
Use a torque screwdriver if you have one.
Tighten screws as follows:
•
Plastic to plastic
Turn an additional 90° after the screw head touches the surface of the
plastic part:
more than 90°
(Cross-section)
•
Logic card to plastic
Turn an additional 180° after the screw head touches the surface of the
logic card:
more than 180°
(Cross-section)
Torque driver
•
•
If you have a torque screwdriver , refer to the “Torque” column for each step.
Make sure that you use the correct screws. If you have a torque screwdriver,
tighten all screws firmly to the torque shown in the table. Never use a
screw that you removed. Use a new one. Make sure that all screws are
tightened firmly.
•
Ensure torque screwdrivers are calibrated correctly following country
specifications.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Z360
Removing and replacing an FRU
This section presents exploded figures with the instructions to indicate how to
remove and replace the FRU. Make sure to observe the following general rules:
1. Do not attempt to service any computer unless you have been trained and
certified. An untrained person runs the risk of damaging parts.
3. Begin by removing any FRUs that have to be removed before the failing
FRU. Any of such FRUs are listed at the top of the page. Remove them in
the order in which they are listed.
4. Follow the correct sequence in the steps to remove the FRU, as given in the
figures by the numbers in square callouts.
5. When turning a screw to replace an FRU, turn it in the direction as given by
the arrow in the figure.
6. When removing the FRU, move it in the direction as given by the arrow in
the figure.
7. To put the new FRU in place, reverse the removal procedures and follow
any of the notes that pertain to replacement. For information about
8. When replacing an FRU, use the correct screw as shown in the procedures.
DANGER
Before removing any FRU, turn off the computer, unplug all power cords from
electrical outlets, remove the battery pack, and then disconnect any of the
interconnecting cables.
Attention: After replacing an FRU, do not turn on the computer until you have
made sure that all screws, springs, and other small parts are in place and none
are loose inside the computer. Verify this by shaking the computer gently and
listening for rattling sounds. Metallic parts or metal flakes can cause electrical
short circuits.
Attention: The system board is sensitive to, and can be damaged by,
electrostatic discharge. Before touching it, establish personal grounding by
touching a ground point with one hand or using an electrostatic discharge (ESD)
strap (P/N 6405959) to remove potential shock reasons.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
1010 Battery pack
DANGER
Only use the battery specified in the parts list for your computer. Any other battery
could ignite or explode.
Figure 1. Removal steps of battery pack
Unlock the battery release lever . Holding the battery release lever in the
1
unlocked position , remove the battery pack in the direction shown by arrow
2
.
3
1
3
2
When installing: Install the battery pack along the slide rails of the slot. Then
make sure that the battery release lever is in the locked position.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
1030 Hard disk drive (HDD)/PCI Express Mini Card slot cover
For access, remove this FRU:
•
Figure 3. Removal steps of HDD/PCI Express Mini Card slot cover
Note: Loosen the screws , but do not remove them.
1
Remove the HDD/PCI Express Mini Card slot cover in the direction shown by
arrow
.
2
1
1
1
1
1
2
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Z360
1040 Hard disk drive
For access, remove these FRUs in order:
•
•
Attention:
• Do not drop the hard disk drive or apply any physical shock to it. The hard
disk drive is sensitive to physical shock. Improper handling can cause damages
and permanent loss of data.
• Before removing the drive, suggest the customer to backup all the information on
it if possible.
• Never remove the drive while the system is operating or is in suspend mode.
Figure 4. Removal steps of hard disk drive
Remove two screws . Hold the HDD connector with one hand in the direction
1
shown by arrow , and pull the tab up in the direction shown by arrow
2
.
3
1
1
3
2
Step
Screw (quantity)
Color
Torque
2.5±0.2 kgfcm
M2.5 × 5.0 mm, flat-head, nylon-coated (2)
Black
1
When installing: Make sure that the HDD connector is attached firmly.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
1050 Optical drive
For access, remove this FRU:
•
Figure 5. Removal steps of optical drive
Remove the screw , insert a screwdriver into the hole aside and push the
1
optical drive in the direction shown by arrow , and then pull the optical drive
2
out in the direction shown by arrow
.
3
1
Step
Screw (quantity)
Color
Torque
M2.5 × 5.0 mm, flat-head, nylon-coated (1)
Black
2.5±0.2 kgfcm
1
2
3
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Z360
1060 PCI Express Mini Card for wireless LAN/WAN
For access, remove these FRUs in order:
•
•
Figure 6. Removal steps of PCI Express Mini Card for wireless LAN/WAN
2
1
1
Disconnect the two wireless LAN cables (black, white) in the direction shown by
arrows , and then remove the screw
1
.
2
39
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
In step , unplug the jacks by using the removal tool antenna RF connector
1
(P/N: 08K7159), or pick up the connectors with your fingers and gently unplug
them in the direction shown by arrows.
Notes: wireless LAN card has 2 cables in step
.
1
wireless LAN card in some models may have 3 cables in step
.
1
Step
Screw (quantity)
Color
Torque
M2.0 × 3.0 mm, flat-head, nylon-coated (1)
Black
1.5±0.2 kgfcm
2
Figure 6. Removal steps of PCI Express Mini Card for wireless LAN/WAN
(continued)
Remove the card in the direction shown by arrow
.
3
3
When installing:
•
In models with a wireless LAN card that has two antenna connectors, plug
the black cable into the jack labeled 1, and the white cable into the jack
labeled 2 on the card.
•
In models with a wireless LAN card that has three antenna connectors, plug
the black cable (1st) (MAIN) into the jack labeled 1, the grey cable (3rd) into
jack labeled 3, and the white cable (2nd) (AUX) into jack labeled 2 on the
card.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
1080 DIMM
For access, remove these FRUs in order:
•
•
Figure 8. Removal steps of DIMM
Release the two latches on both edges of the socket at the same time in the
direction shown by arrows , and then unplug the DIMM in the direction shown
1
by arrow
.
2
1
1
2
Note: If only one DIMM is used on the computer you are servicing, the card
a
b
must be installed in SLOT-0 (
slot).
: lower slot), but not in SLOT-1 (
: upper
b
a
When installing: Insert the notched end of the DIMM into the socket. Push the
DIMM firmly, and pivot it until it snaps into the place. Make sure that it is firmly
fixed in the slot and difficult to be moved.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Z360
1090 Fan assembly and Heat Sink assembly
For access, remove these FRUs in order:
•
•
Figure 9. Removal steps of fan assembly and heat sink assembly
Note: Loosen six screws , but do not remove them.
1
Unplug the connector in the direction shown by arrow
.
2
1
1
1
2
1
1
1
When installing: Make sure that the fan connector is attached firmly to the
system board.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
Figure 9. Removal steps of fan assembly and heat sink assembly (continued)
Lift the fan assembly and heat sink assembly in the direction shown by arrow
Be careful not to damage the connector.
.
3
3
Attention: Do not handle the heat sink assembly roughly. Improper handling
can cause distortion or deformation and imperfect contact with components.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Z360
Figure 9. Removal steps of fan assembly and heat sink assembly (continued)
c
a
b
When installing:
Before you attach the fan assembly to the computer, apply thermal grease,
•
a
b
at an amount of 0.2 grams, to the
part shown in the figure above. Either
too much or too less grease application can cause a thermal problem due
to imperfect contact with a component. In models with the discrete graphics
c
chip, there is an additional thermal rubber whose film to be peeled off.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
1100 CPU
For access, remove these FRUs in order:
•
•
•
Attention: CPU is extremely sensitive. When you service the CPU, avoid any
kind of rough handling.
Figure 10. Removal steps of CPU
Rotate the head of the screw in the direction shown by arrow
to release the
1
lock, then remove the CPU in the direction shown by arrow
.
2
1
a
b
2
When installing: Place the CPU on the CPU socket in the direction shown by
a
arrow , and then rotate the head of the screw in the direction shown by arrow
b
to secure the CPU.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Z360
1110 Keyboard
For access, remove these FRUs in order:
•
•
Figure 11. Removal steps of keyboard
Remove the screws on the bottom.
1
1
1
Step
Screw (quantity)
M2.5 × 5.0 mm, flat-head, nylon-coated (2)
Color
Black
Torque
2.5±0.2 kgfcm
1
47
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
Figure 11. Removal steps of keyboard (continued)
Lift the keyboard a little , unlock the FPC connector and then detach the
2
connector in the direction shown by arrows
.
3 4
2
3
4
When installing: Make sure that the FPC connector is attached firmly and then
lock the FPC connector.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Z360
1120 Keyboard bezel
For access, remove these FRUs in order:
•
•
•
•
•
•
Figure 12. Removal steps of keyboard bezel
Remove seven screws and eight screws
on the bottom. Release the
1
2
antenna cables from the cable guides in the direction shown by arrows
.
3
1
2
2
2
2
2
2
2
2
1
1
1
1
3
1
3
1
Step
Screw (quantity)
M2.5 × 5.0 mm, flat-head, nylon-coated (7)
Color
Torque
Black
2.5±0.2 kgfcm
1.5±0.2 kgfcm
1
M2-0.4 × 2.0 mm, flat-head, nylon-coated (8) Black
2
49
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
Figure 12. Removal steps of keyboard bezel (continued)
Remove two screws . Pull out the black antenna cable form the guide hole
4
and release it from the cable guide in the direction shown by arrow . Detach
5
the LCD connector in the direction shown by arrow
.
6
4
6
4
5
Step
Screw (quantity)
Color
Torque
M2.5 × 5.0 mm, flat-head, nylon-coated (2)
Black
2.5±0.2 kgfcm
4
When installing:
•
Route the antenna cables along the cable guides. As you route the cables,
make sure that they are not subjected to any tension. Tension could cause
the cables to be damaged by the cable guides, or a wire to be broken.
•
Make sure that the LCD connector is attached firmly and make sure that you
do not pinch the antenna cables when you attach the LCD assemblly. Route
the LCD cable along the cable guides.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Z360
Figure 12. Removal steps of keyboard bezel (continued)
Detach three FPC connectors in the direction shown by arrows
.
7 8
7
8
7
8
When installing: Make sure that the three FPC connectors are attached firmly.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
Figure 12. Removal steps of keyboard bezel (continued)
Lift the keyboard bezel a little, detach the speakers connector in the direction
shown by arrow , and then remove the keyboard bezel
9
.
0
10
9
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Z360
1130 Speakers, power board and touch inductive panel
For access, remove these FRUs in order:
•
•
•
•
•
•
•
Figure 13. Removal steps of speakers, power board and touch inductive panel
Turn over the keyboard bezel, remove four screws , release the speaker
1 2
cables from the cable guides, and then remove the speakers in the direction
shown by arrows
.
3
1
1
2
1
3
3
Step
Screw (quantity)
Color
White
White
Torque
M2.0 × 3.5 mm, flat-head, nylon-coated (3)
M2.0 × 5.0 mm, flat-head, nylon-coated (1)
1.5±0.2 kgfcm
2.0±0.2 kgfcm
1
2
Figure 13. Removal steps of speakers, power board and touch inductive panel
(continued)
53
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
Remove one screw
and remove the power board
.
5
4
4
5
Notes: The touch inductive panel is fixed on the keyboard bezel.
Step
Screw (quantity)
Color
Torque
M2.0 × 3.0 mm, flat-head, nylon-coated (1)
Black
1.5±0.2 kgfcm
4
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Z360
1140 System board
Important notices for handling the system board:
When handling the system board, bear the following in mind.
• Be careful not to drop the system board on a bench top that has a hard surface,
such as metal, wood, or composite.
• Avoid rough handling of any kind.
• In the whole process, make sure not to drop or stack the system board.
• If you put a system board down, make sure to put it only on a padded surface such
as an ESD mat or conductive corrugated material.
For access, remove these FRUs in order:
•
•
•
•
•
•
•
•
•
•
•
Figure 14. Removal steps of system board
Remove two screws
and detach two connectors in the direction shown by
1
arrows
.
2
2
1
1
2
When installing: Make sure that the connectors are attached firmly.
Step
Screw (quantity)
Color
Torque
M2.5 × 5.0 mm, flat-head, nylon-coated (2)
Black
2.5±0.2 kgfcm
1
55
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
Figure 14. Removal steps of system board (continued)
Remove the system board in the direction shown by arrow
.
3
3
b
a
a
When installing: When attaching the system board to the base cover, adjust
b
the placement of the wireless radio switch as shown in , and make sure that
both of the audio jack and the microphone jack are attached to the holes on the
a
base cover as shown in . Improper placement of the switch or those jacks
might cause a damage.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Z360
1150 LCD unit
For access, remove these FRUs in order:
•
•
•
•
•
•
•
•
•
•
•
•
Figure 15. Removal steps of LCD unit
Pull out the white antenna cable from the guide hole and release it from the
cable guides in the direction shown by arrows . Remove five screws
1
.
2
2
2
2
2
2
1
1
Step
Screw (quantity)
M2.5 × 5.0 mm, flat-head, nylon-coated (5)
Color
Torque
Black
2.5±0.2 kgfcm
2
When installing:
•
Route the antenna cables along the cable guides. As you route the cables,
make sure that they are not subjected to any tension. Tension could cause
the cables to be damaged by the cable guides, or a wire to be broken.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
Figure 15. Removal steps of LCD unit (continued)
Remove the LCD unit in the direction shown by arrows
.
3
3
3
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Z360
1160 Base cover
For access, remove these FRUs in order:
•
•
•
•
•
•
•
•
•
•
•
•
•
Figure 16. Removal steps of Base cover
Remove one screw
and then remove the power assembly in the direction
1
shown by arrows
.
2
1
2
When installing: Make sure that the power connector is attached firmly.
Step
Screw (quantity)
Color
Torque
M2.0 × 4.0 mm, flat-head, nylon-coated (1)
Black
2.0±0.2 kgfcm
1
59
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
Figure 16. Removal steps of Base cover (continued)
Remove one screw
and then remove the USB assembly in the direction
3
shown by arrow
.
4
3
4
When installing: Make sure that the USB connector is attached firmly.
Step
Screw (quantity)
Color
Torque
M2.0 × 3.0 mm, flat-head, nylon-coated (1)
Black
1.5±0.2 kgfcm
3
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Z360
Note: Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several
kinds. When you replace the base cover, you need to apply the following
label:
The following labels need to be peeled off from the old base cover, and need
to be put on the new base cover.
a
b
c
MTM&PRC Label
COA Label
Rating label
d
e
f
WLAN Label
B/T Label
Energy Save Label
Rating Label_Korea
g
For the location of each label, refer to the following figure:
For some models, you also need to apply one or two FCC labels. Check the
old base cover; if it has one or two FCC labels, find duplicates of them in the
label kit and apply them to the new base cover.
d
a
e
b
f
g
c
61
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
1170 LCD front bezel
For access, remove these FRUs in order:
•
•
•
•
•
•
•
•
•
•
•
•
•
Figure 17. Removal steps of LCD front bezel
Remove two screws
.
1
1
1
Step
Screw (quantity)
M2.0 × 4.0 mm, flat-head, nylon-coated (2)
Color
Torque
Black
2.0±0.2 kgfcm
1
Remove the LCD front bezel in the direction shown by arrows
.
2
2
2
2
2
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Z360
1180 LCD panel and hinges
For access, remove these FRUs in order:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Figure 18. Removal steps of LCD panel and hinges
Remove six screws , detach the integrated camera connector in the direction
1
shown by arrow , and then remove the LCD panel in the direction shown by
2
arrow
.
3
1
2
1
1
1
1
1
3
Step
Screw (quantity)
M2.0 × 3.0 mm, flat-head, nylon-coated (6)
Color
Torque
Black
1.5±0.2 kgfcm
1
When installing: Make sure that the connector is attached firmly.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
Figure 18. Removal steps of LCD panel and hinges (continued)
Remove four screws , and release the hinges from the LCD panel in the
4
direction shown by arrows
.
5
4
5
4
4
5
4
Step
Screw (quantity)
M2.0 × 3.0 mm, flat-head, nylon-coated (4)
Color
Torque
Black
1.5±0.2 kgfcm
4
Note: The LCD circuit is attached to the LCD panel, and connected with the
LCD cable by an FPC connector.
Peel off the adhesive tape and detach the connector in the direction shown by
arrow
.
6
6
When installing: Make sure that the metal connector is attached firmly.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Z360
1190 Integrated camera
For access, remove these FRUs in order:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Figure 19. Removal steps of integrated camera
Note: The integrated camera is stuck to the top center of the LCD cover.
Remove the integrated camera in the direction shown by arrow
.
1
1
When installing: Stick the integrated camera to the top center of the LCD
cover and ajust the placement of it to make sure the connector is attached
firmly. When replacing the integrated camera, route the connector cable as
shown in the figure above.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
1200 Antenna assembly and LCD cover
For access, remove these FRUs in order:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Figure 20. Removal steps of antenna assembly and LCD cover
Peel off the adhesive tapes securing the antenna boards, release the
cables from the cable guide, and then remove the antenna assembly in the
direction shown by arrows
.
1
1
1
When installing: Route the antenna cables along the cable guides and secure
the antenna boards with adhesive tapes. As you route the cables, make sure
that they are not subjected to any tension. Tension could cause the cables to
be damaged by the cable guides, or a wire to be broken.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Z360
Locations
Front view
Wireless module antennas (Select models only)
1
2
3
4
5
6
Built-in microphone
Integrated camera
Computer display
Speakers
System status indicators
Touchpad
7
8
9
0
K
L
M
N
O
Power button
OneKey Rescue system button
Mute/Unmute button
OneKey Theater button
Smart noise control button
Energy Management button
Integrated wireless device switch (Select models only)
Memory card slot
1
2
1
3
9
4
8
10
11
12
13
5
6
6
7
6
5
6
14
15
67
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
Right-side view
Microphone jack
Headphone jack
Optical drive
1
2
3
4
5
USB port
AC power adapter jack
5
4
3
2
1
Bottom and Left-side view
USB port or eSATA/USB combo port
1
2
3
4
5
6
7
8
9
J
K
L
M
USB port
HDMI port
RJ-45 port
VGA port
Fan louvers
Kensington slot
Battery latch - spring loaded
SIM card slot (Select models only)
Battery pack
Battery latch - manual
Hard disk drive (HDD)/Mini PCI Express Card slot compartment
Memory/CPU (Central processing unit) compartment
11
10
9
8
7
5
4
12
4
3
2
13
1
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Z360
Table 5. Parts list—Overall
No. FRU
FRU no.
1
2
3
3
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
6
6
7
7
7
7
LL7 TOP SUB ASSY violet
31044765
31044766
11012323
11012324
11012395
11012397
11012402
11012403
11012478
11012479
LL7 TOP-NCVM SUB ASSY silver
LL7A MB(HM55/UMA/100LAN) SP
LL7A MB(HM55/N11MGE2512M/100L) SP
LL7A MB(HM55/UMA/1GLAN)
LL7A MB(HM55/N11MGE2 512M/1GL)
LL7A MBASSY(HM55/N11MGE2 1G/100L)
LL7A MBASSY(HM55/N11MGE2 1G/1GL)
LL7A MB ASSY(UMA/LAN100/3G)
LL7A MB ASSY(DIS 512M/LAN100/3G)
CPU assembly, Intel ARD 2.66G 4M I7-620M rPGA processor
CPU assembly, Intel ARD 2.53G 3M I5-540M rPGA processor
CPU assembly, Intel ARD 2.40G 3M I5-520M rPGA processor
102000791
102000790
102000789
CPU assembly, Intel ARD 2.26G 3M C2 I5-430M PGA processor 102000788
CPU assembly, Intel ARD 2.26G 3M C2 I3-350M PGA processor 102000787
CPU assembly, Intel ARD 2.26G K-0 3MB QS I3-350M
102000897
CPU assembly, Intel ARD 2.40G 3M K0 I5-450M PGA processor 102000845
CPU assembly, Intel ARD 2.40G 3M K0 I3-370M PGA processor 102000846
CPU assembly, Intel P6000 1.86GHZ 3M C-2 PGA processor
102000844
CPU assembly, Intel ARD 2.26G 3M K0 I5-430M PGA processor 102000921
CPU assembly, Intel ARD 2.13G 3M K0 I3-330M PGA processor 102000920
LL7A THERMAL MODULE 35W DIS S.P
LL7 THERMAL MODULE 35W UMA S.P
DDRIII 1066 1GB, M471B2873FHS-CF8
31044835
31044837
11011550
DDRIII 1066 1GB, EBJ10UE8BDS0-AE-F (Rev D /1Gb/65nm) 11011281
DDRIII 1066 1GB, MT8JSF12864HZ-1F1(V58B/1Gb/68nm) 11010924
DDRIII 1066 1GB, HYN HMT112S6TFR8C-G7N0 DDR3
1066 1GB
11011555
7
7
7
DDRIII 1066 2GB, M471B5673FH0-CF8
11011551
DDRIII 1066 2GB, EBJ21UE8BDS0-AE-F(Rev D /1Gb/65nm) 11011240
DDRIII 1066 2GB, MT16JSF25664HZ-1G1F1
(V58B/1Gb/68nm)
11010925
7
DDRIII 1066 2GB, HYN HMT125S6TFR8C-G7N0 DDR3 1066 11011554
2GB
7
7
7
7
7
7
DDRIII 1066 4GB, SAM M471B5273CH0-CF8 DDR3 1066 4GB 11011937
DDRIII 1066 4GB, HMT351S6AFR8C-G7N0 (Orion/2Gb/54nm) 11011215
DDRIII 1333 1GB, M471B2873FHS-CH9 (Rev F /1Gb/46nm)
DDRIII 1333 1GB, EBJ10UE8BDS0-DJ-F(Rev D /1Gb/65nm)
11011936
11011497
DDRIII 1333 1GB, MT8JSF12864HZ-1G4F1(V58B/1Gb/68nm) 11011494
DDRIII 1333 1GB, HMT112S6TFR8C-H9 N0 (CS Samples
2010.1.8)
11011971
7
DDRIII 1333 2GB, M471B5673FH0-CH9 (Rev F /1Gb/46nm)
11011935
71
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
Table 5. Parts list—Overall (continued)
No. FRU
FRU no.
7
7
DDRIII 1333 2GB, EBJ21UE8BDS0-DJ-F(Rev D /1Gb/65nm)
11011496
11011493
DDRIII 1333 2GB, MT16JSF25664HZ-
1G4F1(V58B/1Gb/68nm)
7
7
7
7
8
8
8
8
DDRIII 1333 2GB, HMT125S6TFR8C-H9 N0
(CS Samples 2009.12.24)
11011970
11011934
11011513
11012199
DDRIII 1333 4GB, SAM M471B5273CH0-CH9 DDR3 1333
4GB
DDRIII 1333 4GB, HMT351S6AFR8C-H9 N0
(Rev Orion /2Gb/54nm)
DDRIII 1333 4GB, HYN HMT351S6BFR8C-H9 N0 DDR3
1333 4GB
WLAN card, 802.11a/g/n && 802.16e, Intel 6250NX MOW M 20002321
PCIE NB HMC
WLAN card, 802.11a/g/n && 802.16e, Intel 6250GX MOW M 20002388
PCIE NB HMC
WLAN card, 802.11 b/g/n, Intel 1000N MOW M PCIE NB
HMC
20002329
WLAN card, 802.11 b/g/n, Gtc BCM4313 M 802.11N MOW
NB
20002347
8
8
WLAN card, 802.11 b/g/n, Cbt AR9285 HB95 BGN MOW NB 20002346
WLAN card, 802.11 b/g/n, Liteon AR9285 HB95 BGN MOW 20002357
NB
8
8
8
8
8
8
8
8
8
8
8
8
8
WWAN card, WCDMA/HSDPA 7.2M, Ericsson F3607gw
WCDMA 850MHz WWAN
11011296
11011295
11010888
11011654
11011653
11011655
11010853
WWAN card, WCDMA/HSDPA 7.2M, Ericsson F3607gw
WCDMA 900MHz WWAN
WWAN card, WCDMA/HSDPA 7.2M, Huawei EM770
HSDPA MiniPCIE WWAN card
WWAN card, WCDMA/HSDPA 7.2M, Huawei EM770U
WCDMA MOW WWAN card
WWAN card, WCDMA/HSDPA 7.2M, Huawei EM770W
WCDMA MOW WWAN card
WWAN card, Gobi, Qualcomm GOBI WCDMA/EVDO
WWAN Card
WWAN card, EVDO, Huawei EM660 EV-DO MiniPCIE
WWAN card
WWAN card, EVDO, ZTE MC2716 EVDO MiniPCIE WWAN 11011055
card
WWAN card, TD-SCDMA, TC LC5730D TD-SCDMA
MiniPCIE WWAN card
11011652
11011598
WWAN card, TD-SCDMA, TC LC5730C TD+CMMB
MiniPCIE WWAN card
WWAN card, TD-SCDMA, LM TD231 TD-SCDMA MiniPCIE 11011651
WWAN card
WWAN card, TD-SCDMA, LM TD232 TD+CMMB MiniPCIE 11011650
WWAN card
WWAN card, TD-SCDMA, ZTE MU303 TD+CMMB
MiniPCIE WWAN card
11011599
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Z360
Table 5. Parts list—Overall (continued)
No. FRU
FRU no.
8
WWAN card, TD-SCDMA, ZTE MU302 TD-SCDMA
11011600
MiniPCIE WWAN card
9
LL7 BASE SUB ASSY W/3G
LL7 BASE SUB ASSY W/O 3G
31044761
31044762
9
10
Battery pack, 2.2Ah, 6 cell, Sanyo 11.1V 3S2P 4400mAh Li- 121000791
ion NB battery
10
10
10
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
Battery pack, 2.2Ah, 6 cell, LG 11.1V 3S2P 4400mAh Li-ion 121000793
NB battery
Battery pack, 2600mAh 6cell, Sanyo 11.1V 3S2P 5200mAh 121000682
Battery
Battery pack, 2600mAh 6cell, LG Apex 11.1V 3S2P 121000680
5200mAh Li-ion NB Battery
HDD, 250G 5400rpm SATA, Hitachi HTS545025B9A300
250G 9NB
16004060
HDD, 250G 5400rpm SATA, WD WD2500BEVT-24A23T0 16004524
5400RPM250G
HDD, 250G 5400rpm SATA, Seagate ST9250315AS 250G 16004186
9NB
HDD, 250G 5400rpm SATA, Toshiba MK2565GSX 16004641
5400RPM 250G
HDD, 320G 5400rpm SATA, Hitachi HTS545032B9A300 16004059
320G 9NB
HDD, 320G 5400rpm SATA, WD WD3200BEVT-24A23T0 16004525
5400RPM320G
HDD, 320G 5400rpm SATA, Seagate ST9320325AS 320G 16004183
9NB
HDD, 320G 5400rpm SATA, Toshiba MK3265GSX 16004642
5400RPM 320G
HDD, 500G 5400rpm SATA, Hitachi HTS545050B9A300 16004058
500G 9NB
HDD, 500G 5400rpm SATA, WD WD5000BEVT-24A0RT0 16004526
5400RPM500G
HDD, 500G 5400rpm SATA, Seagate ST9500325AS 500G 16004189
9NB
HDD, 500G 5400rpm SATA, Toshiba MK5065GSX 16004643
5400RPM 500G
HDD, 640G 5400rpm SATA, WD WD6400BEVT-24A0RT0 16004527
5400RPM 640G
HDD, 640G 5400rpm SATA, Toshiba MK6465GSX 16004644
5400RPM 640G
HDD, 320G 7200rpm SATA, Hitachi HTS725032A9A364 16004530
7200RPM320G
11
11
HDD, 320G 7200rpm SATA, WD MX250M 320G 7200RPM TBD
HDD, 320G 7200rpm SATA, Seagate ST9320423AS 16004533
7200RPM320G 9NB
11
11
HDD, 500G 7200rpm SATA, Hitachi HTS725050A9A364 16004531
7200RPM500G
HDD, 500G 7200rpm SATA, WD MX250M 500G 7200RPM TBD
73
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
Table 5. Parts list—Overall (continued)
No. FRU
FRU no.
11
12
12
13
13
HDD, 500G 7200rpm SATA, Seagate ST9500420AS 16004532
7200RPM500G 9NB
Bluetooth card, BT2.1 + EDR, Fcn BCM92070 BT2.1 EDR
Flash U NB
20002266
Bluetooth card, BT2.1 + EDR, USI BCM92070 BT2.1 EDR
Flash U NB
20002326
ODD, 12.7mm Tray Rambo, Optiarc AD-7700H Tray in 25009572
RAMBO ODD
ODD, 12.7mm Tray Rambo, HLDS GT30N Tray in RAMBO 25009116
ODD
13
13
ODD, 12.7mm Tray Rambo, Optiarc AD-7585H
25009461
ODD, 12.7mm Tray Rambo, PCC UJ-890A Tray in RAMBO 25009440
ODD
13
13
13
ODD, 12.7mm Tray Rambo, PLDS DS-8A4S Tray in 25009439
RAMBO ODD
ODD, 12.7mm Tray BD Combo, Optiarc BC-5500H BD 25009785
Combo ODD
ODD, 12.7mm Tray BD Combo, PLDS DS-4E1S BD Combo 25009829
ODD
14
14
15
16
—
LL7 ODD BEZEL BD ASSY S.P
LL7 ODD BEZEL SUPERMULTI TRAY IN
LL7 THERMAL DOOR ASSY
31044838
31044772
31044767
31044768
LL7 HDD DOOR ASSY
74
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
13.3-in. HD TFT
Table 6. Parts list—13.3-in. HD TFT
No. FRU
FRU no.
1
2
3
3
3
3
3
4
5
6
6
6
6
LL7 LCD BEZEL ASSY SP
LL7 HINGE (R+L) SP
31044778
31044781
LCD panel, LGD LP133WH1-TLA3 HD G W LED1 NB LCD 18004268
LCD panel, AUO B133XW04 V0 1A HD G W LED1 NB LCD 18004234
LCD panel, AUO B133XW04 V0 0A HD G W LED1 NB LCD 18004235
LCD panel, SEC LTN133AT17-L01 HD G W LED1 NB LCD 18004267
LCD panel, CMO N133B6-L02 HD G W LED1 NB LCD
LL7 CAMERA MODULE 1.3M
18004231
31044779
31044780
31044774
31044775
31044776
31044777
LL7 CAB ASSY WXGA LCD(40/30P,R1A)20V
LL7 LCD COVER violet ASSY W/3G
LL7 LCD COVER violet ASSY W/O 3G
LL7 LCD COVER Black ASSY W/3G
LL7 LCD COVER Black ASSY W/O 3G
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Z360
Keyboard
Table 7. Parts list—Keyboard
Language
P/N
Bulgarian
Czechoslovakia
International English 25010709
25010708
25011096
Swiss
25010710
25010711
25010712
25010713
25010714
Slovenian
Slovakian
Icelandic
Belgian
Four Nordic countries 25010715
Hungarian
Hebrew
Greek
25010716
25010717
25010718
25010719
25010720
25010721
25010722
25010723
25010724
25010725
25010726
Dutch
Czech
Japanese
Brazilian
Arabic
Chicony
German
French
Russian
Traditional Chinese 25010727
Korean
25010728
25010729
25010730
25010731
25010732
25010733
25010734
25010735
25010736
25010737
25010688
25011158
KYB
Black
French&English
Latin
Portuguese
Thai
Turkish
Spanish
Italian
UK English
English
Bulgarian
Czechoslovakia
International English 25010689
Swiss
25010690
25010691
25010692
25010693
25010694
Slovenian
Slovakian
Icelandic
Belgian
Sunrex
Four Nordic countries 25010695
Hungarian
Hebrew
Greek
25010696
25010697
25010698
25010699
Dutch
77
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
Table 7. Parts list—Keyboard (continued)
Language
P/N
Czech
25010700
25010701
25010702
25010703
25010704
25010742
25010743
Japanese
Brazilian
Arabic
German
French
Russian
Traditional Chinese 25010744
Korean
25010745
25010746
25010747
25010748
25010749
25010750
25010751
25010705
25010706
25010707
25011065
25011066
Black
(continued)
Sunrex
(continued)
French&English
Latin
Portuguese
Thai
Turkish
Spanish
Italian
UK English
English
Czechoslovakia
Bulgarian
International English 25011067
Swiss
25011068
25011069
25011070
25011071
25011072
Slovenian
Slovakian
Icelandic
Belgian
KYB
(continued)
Four Nordic countries 25011073
Hungarian
Hebrew
Greek
25011074
25011075
25011076
25011077
25011078
25011079
25011080
25011081
25011082
25011083
25011084
Dutch
Czech
Pink
Chicony
Japanese
Brazilian
Arabic
German
French
Russian
Traditional Chinese 25011085
Korean
25011086
25011087
25011088
25011089
25011090
25011091
25011092
French&English
Latin
Portuguese
Thai
Turkish
Spanish
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Z360
Table 7. Parts list—Keyboard (continued)
Language
P/N
Italian
25011093
Chicony
(continued)
UK English
English
25011094
25011095
25011127
25011128
Czechoslovakia
Bulgarian
International English 25011129
Swiss
25011130
25011131
25011132
25011133
25011134
Slovenian
Slovakian
Icelandic
Belgian
Four Nordic countries 25011135
Hungarian
Hebrew
Greek
25011136
25011137
25011138
25011139
25011140
25011141
25011142
25011143
25011144
25011145
25011146
Dutch
Czech
KYB
Pink
(continued)
(continued)
Japanese
Brazilian
Arabic
Sunrex
German
French
Russian
Traditional Chinese 25011147
Korean
25011148
25011149
25011150
25011151
25011152
25011153
25011154
25011155
25011156
25011157
French&English
Latin
Portuguese
Thai
Turkish
Spanish
Italian
UK English
English
79
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
Miscellaneous parts
Table 8. Parts list—Miscellaneous parts
FRU
P/N
System miscellaneous parts:
•
•
(a) LL7 HDD BKT(FBLL7005,REV3A)
31044771
31044773
(b) LL7 ODD BKT (FBLL7004,REV3A)
Cable miscellaneous parts:
•
•
•
(c) LL7 HDD CABLE(20/22,3A)300V
(d ) LL7 USB CABLE ASSY
31044951
31044770
31044769
(e) LL7 BLUETOOTH CABLE ASSY
Note: Italicized letters in parentheses are references to the
exploded view in
.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Z360
AC adapters
Table 9. Parts list—3-pin AC adapters
FRU
P/N
65W3PIN, Delta ADP-65KH B adapter
65W3PIN, Liteon PA-1650-56LC adapter
65W3PIN, Chicony CPA-A065 20V3.25A adapter
65W3PIN, Brazil PA-1650-52LB adapter
90W3PIN, Delta ADP-90DD B adapter
90W3PIN, Liteon PA-1900-56LC adapter
90W3PIN, CPA-A090 20V4.5A adapter
36001646
36001651
36001792
36001714
36001647
36001652
36001789
81
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
Power cords
A Lenovo IdeaPad power cord for a specific country or region is usually
available only in that country or region:
Table 10. Parts list—3-pin power cords
Region
P/N
CCC
145000602
•
SSD YD-118-1+IEC53RVV+SSD-3-2B-1 1m
CCC
145000600
145000599
145000598
145000597
145000596
145000595
145000594
145000593
145000592
145000591
145000590
145000589
145000588
145000587
145000586
145000585
145000568
145000567
145000566
145000565
•
LINETEK PC323+RVV300/300+LS15 1m
Argentina
•
LINETEK LS15+H03VV-F+LP39 1m
Danmark
•
LINETEK LS15+H03VV-F+LP-38 1m
Switzerland
•
LINETEK LS15+H03VV-F+LP-37 1m
Brazil
•
LINETEK LS15 H03VV-F LP26A 1m
Israel
•
LINETEK LS15+H03VV-F+LP-41 1m
UL
•
LINETEK LP-30B + SPT-2 + LS15 1m
LINETEK LP-61L+ H03VV-F+ LS15 1m
UK
•
Indian
•
LINETEK PE-361+ H05VV-F+ LS15 1m
Italy
•
LINETEK LS15+H03VV-F+PE-336 1m
Korea
•
LINETEK LS15+H05VV-F+LP-E04A 1m
Australia
•
LINETEK LS15+H03VV-F+LP-23A 1m
Taiwan
•
LINETEK LS15+VCTF+LP-53 1m
Japan
•
LINETEK LS15+VCTF+LP-54 1m
Africa
•
LINETEK LS15+H03VV-F+PE-364 1m
CE
•
LINETEK LP-34+H03VV-F + LS15 1m
CCC
•
Longwell LSG-31+RVV300/300+LS-18 1m
Argentina
•
Longwell LP-24+H03VV-F+LS-18 1m
Danmark
•
Longwell LP-40+H03VV-F+LS-18 1m
Switzerland
•
Longwell LP-37+H03VV-F+LS-18 1m
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Z360
Table 10. Parts list—3-pin power cords (continued)
Region
P/N
Brazil
145000564
•
Longwell LP-46+H03VV-F+LS-18 1m
Israel
145000563
145000562
145000561
145000560
145000559
145000558
145000557
145000556
145000555
145000554
145000553
•
Longwell LP-41+H03VV-F+LS-18 1m
UL
•
Longwell LP-30B+SPT-2 18AWG+LS-18 1m
Longwell LP-61L+H03VV-F+LS-18 1m
UK
•
Indian
•
Longwell LP-67+BIS+LS-18 1m
Italy
•
Longwell LP-22+H03VV-F+LS-18 1m
Korea
•
Longwell LP-486+KTLH03VV-F+LS-5 1m
Australia
•
Longwell LP-23A+LFC-3R+LS-18 1m
Taiwan
•
Longwell LP-71+VCTF+LS-33 1m
Japan
•
Longwell LP-54+VCTF+LS-18 1m
Africa
•
Longwell LP-39+H03VV-F+LS-18 1m
CE
•
Longwell LP-34A+H03VV-F+LS-18 1m
83
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Z360 Hardware Maintenance Manual
Notices
Lenovo may not offer the products, services, or features discussed in this
document in all countries. Consult your local Lenovo representative for
information on the products and services currently available in your area. Any
reference to a Lenovo product, program, or service is not intended to state or
imply that only that Lenovo product, program, or service may be used. Any
functionally equivalent product, program, or service that does not infringe
any Lenovo intellectual property right may be used instead. However, it is the
user’s responsibility to evaluate and verify the operation of any other product,
program, or service.
Lenovo may have patents or pending patent applications covering subject matter
described in this document. The furnishing of this document does not give you
any license to these patents.
LENOVO GROUP LTD. PROVIDES THIS PUBLICATION “AS IS”
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-
INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. Some jurisdictions do not allow disclaimer of express or implied
warranties in certain transactions, therefore, this statement may not apply to you.
This information could include technical inaccuracies or typographical errors.
Changes are periodically made to the information herein; these changes
will be incorporated in new editions of the publication. Lenovo may make
improvements and/or changes in the product(s) and/or the program(s)
described in this publication at any time without notice.
The products described in this document are not intended for use in
implantation or other life support applications where malfunction may result in
injury or death to persons. The information contained in this document does not
affect or change Lenovo product specifications or warranties. Nothing in this
document shall operate as an express or implied license or indemnity under the
intellectual property rights of Lenovo or third parties. All information contained
in this document was obtained in specific environments and is presented as an
illustration. The result obtained in other operating environments may vary.
Lenovo may use or distribute any of the information you supply in any way it
believes appropriate without incurring any obligation to you.
Any references in this publication to non-Lenovo Web sites are provided for
convenience only and do not in any manner serve as an endorsement of those
Web sites. The materials at those Web sites are not part of the materials for
this Lenovo product, and use of those Web sites is at your own risk.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Notices
Any performance data contained herein was determined in a controlled
environment. Therefore, the result obtained in other operating environments
may vary significantly. Some measurements may have been made on
development-level systems and there is no guarantee that these measurements
will be the same on generally available systems. Furthermore, some
measurements may have been estimated through extrapolation. Actual results
may vary. Users of this document should verify the applicable data for their
specific environment.
Trademarks
The following terms are either registered trademarks or trademarks of Lenovo
in the United States and/or other countries:
Lenovo®
Lenovo logo®
IdeaPad®
VeriFace®
OneKey Rescue®(OneKey Recovery, OneKey Antivirus)
APS®
Power Express®
Energy Management and ReadyComm®
The following terms are trademarks of Microsoft Corporation in the United
States, other countries, or both:
Windows®
Windows Vista®
Windows® 7
The following are trademarks of Intel Corporation or its subsidiaries in the
United States, other countries, or both:
Intel®
Intel® Core™ 2 Duo
Other company, product, or service names may be the trademarks or service
marks of others.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
|